Search Results

Search found 9605 results on 385 pages for 'mac twist'.

Page 200/385 | < Previous Page | 196 197 198 199 200 201 202 203 204 205 206 207  | Next Page >

• parameter for xcodebuild for using latest sdk.

  - by Maciek Sawicki

  I using ant exec task to execute xcodebuild to build some iOS projects hudson. I would like to be able to crate script that way that allows not to specify sdk version, because after updating sdk on hudson slave or my iOS projects all my projects failing.... There is is nice option in xcode since sdk 4.2 in target setup Base SDK - Latest iOS and I don't have to provide -sdk param in xcodebuild command, but then (i think) it's taken from xcode project and it's bad because then some one can change target from simulator to device accidentally during commit. I need something that is constant. I will prefer not to use env variable because I would like to be able to run this ant task also on dev machines and would like not have to renember about setting it on all machines. Unfortunately xcodebuild -showsdk gives only: Mac OS X SDKs: Mac OS X 10.4 -sdk macosx10.4 Mac OS X 10.5 -sdk macosx10.5 Mac OS X 10.6 -sdk macosx10.6 iOS SDKs: iOS 4.2 -sdk iphoneos4.2 iOS Simulator SDKs: Simulator - iOS 3.2 -sdk iphonesimulator3.2 Simulator - iOS 4.0 -sdk iphonesimulator4.0 Simulator - iOS 4.1 -sdk iphonesimulator4.1 Simulator - iOS 4.2 -sdk iphonesimulator4.2 I need something like -sdk iphoneosLatest. My only idea is to pare output of xcodebuild -showsdk with some script, but I don't like this idea.

  Read the article

• flash creates more than one http request

  - by MilanAleksic

  We are facing one issue directly connected with our Flash API we've given to a 3rd party flash vendor. To make a long story short, our API basically wraps domain logic on client and creates a single POST request towards the server in JSON format. All will be ok except in combination MacOS + Safari we receive double requests on server (?). Even more interesting, we are receiving different agent names - one is expected name/decriptor of the browser and system, other is "CFNetwork". POST /RuntimeDelegate.ashx - 80 Mozilla/5.0+(Macintosh;+U;+Intel+Mac+OS+X+10_4_11;+fr)+AppleWebKit/531.22.7+(KHTML,+like+Gecko)+Version/4.0.5+Safari/531.22.7 200 0 0 POST /RuntimeDelegate.ashx - 80 CFNetwork/129.24 200 0 0 POST /RuntimeDelegate.ashx - 80 Mozilla/5.0+(Macintosh;+U;+Intel+Mac+OS+X+10_4_11;+fr)+AppleWebKit/531.22.7+(KHTML,+like+Gecko)+Version/4.0.5+Safari/531.22.7 200 0 0 POST /RuntimeDelegate.ashx - 80 Mozilla/5.0+(Macintosh;+U;+Intel+Mac+OS+X+10_4_11;+fr)+AppleWebKit/531.22.7+(KHTML,+like+Gecko)+Version/4.0.5+Safari/531.22.7 200 0 0 POST /RuntimeDelegate.ashx - 80 CFNetwork/129.24 200 0 0 POST /RuntimeDelegate.ashx - 80 Mozilla/5.0+(Macintosh;+U;+Intel+Mac+OS+X+10_4_11;+fr)+AppleWebKit/531.22.7+(KHTML,+like+Gecko)+Version/4.0.5+Safari/531.22.7 200 0 0 POST /RuntimeDelegate.ashx - 80 CFNetwork/129.24 200 0 0 POST /RuntimeDelegate.ashx - 80 CFNetwork/129.24 200 0 0 Has anyone encounter anything like this before?

  Read the article

• pdf external streams in Max OS X Preview

  - by olpa

  According to the specification, a part of a PDF document can reside in an external file. An example for an image: 2 0 obj << /Type /XObject /Subtype /Image /Width 117 /Height 117 /BitsPerComponent 8 /Length 0 /ColorSpace /DeviceRGB /FFilter /DCTDecode /F (pinguine.jpg) >> stream endstream endobj I found that this functionality does work in Adobe Acrobat 5.0 for Windows (sample PDF with the image), also I managed to view this file in Adobe Acrobat Reader 8.1.3 for Mac OS X after I found the setting "Allow external content". Unfortunately, it seems that non-Adobe tools ignore the external stream feature. I hope I'm wrong, therefore ask the question: How to enable external streams in Mac OS X? (I think that all the system Mac OS X tools use the same library, therefore say "Mac OS X" instead of "Preview".) Or maybe there could be a programming hook to emulate external streams? My task is: store a big set of images (total ˜300Mb) outside of a small PDF (˜1Mb). At some moment, I want to filter PDF through a quartz filter and get a PDF with the images embedded. Any suggestions are welcome.

  Read the article

• DialogFX: A New Approach to JavaFX Dialogs

  - by HecklerMark

  How would you like a quick and easy drop-in dialog box capability for JavaFX? That's what I was thinking when a weekend presented itself. And never being one to waste a good weekend...  :-) After doing some "roll-your-own" basic dialog building for a JavaFX app, I recently stumbled across Anton Smirnov's work on GitHub. It was a good start, but it wasn't exactly what I was after, and ideas just kept popping up of things I'd do differently. I wanted something a bit more streamlined, a bit easier to just "drop in and use". And so DialogFX was born. DialogFX wasn't intended to be overly fancy, overly clever - just useful and robust. Here were my goals: Easy to use. A dialog "system" should be so simple to use a new developer can drop it in quickly with nearly no learning curve. A seasoned developer shouldn't even have to think, just tap in a few lines and go. Why should dialogs slow "actual development"?  :-) Defaults. If you don't specify something (dialog type, buttons, etc.), a good dialog system should still work. It may not be pretty, but it shouldn't throw gears. Sharable. It's all open source. Even the icons are in the commons, so they can be reused at will. Let's take a look at some screen captures and the code used to produce them.   DialogFX INFO dialog Screen captures Windows Mac  Sample code         DialogFX dialog = new DialogFX();        dialog.setTitleText("Info Dialog Box Example");        dialog.setMessage("This is an example of an INFO dialog box, created using DialogFX.");        dialog.showDialog(); DialogFX ERROR dialog Screen captures Windows Mac  Sample code         DialogFX dialog = new DialogFX(Type.ERROR);        dialog.setTitleText("Error Dialog Box Example");        dialog.setMessage("This is an example of an ERROR dialog box, created using DialogFX.");        dialog.showDialog(); DialogFX ACCEPT dialog Screen captures Windows Mac  Sample code         DialogFX dialog = new DialogFX(Type.ACCEPT);        dialog.setTitleText("Accept Dialog Box Example");        dialog.setMessage("This is an example of an ACCEPT dialog box, created using DialogFX.");        dialog.showDialog(); DialogFX Question dialog (Yes/No) Screen captures Windows Mac  Sample code         DialogFX dialog = new DialogFX(Type.QUESTION);        dialog.setTitleText("Question Dialog Box Example");        dialog.setMessage("This is an example of an QUESTION dialog box, created using DialogFX. Would you like to continue?");        dialog.showDialog(); DialogFX Question dialog (custom buttons) Screen captures Windows Mac  Sample code         List<String> buttonLabels = new ArrayList<>(2);        buttonLabels.add("Affirmative");        buttonLabels.add("Negative");         DialogFX dialog = new DialogFX(Type.QUESTION);        dialog.setTitleText("Question Dialog Box Example");        dialog.setMessage("This is an example of an QUESTION dialog box, created using DialogFX. This also demonstrates the automatic wrapping of text in DialogFX. Would you like to continue?");        dialog.addButtons(buttonLabels, 0, 1);        dialog.showDialog(); A couple of things to note You may have noticed in that last example the addButtons(buttonLabels, 0, 1) call. You can pass custom button labels in and designate the index of the default button (responding to the ENTER key) and the cancel button (for ESCAPE). Optional parameters, of course, but nice when you may want them. Also, the showDialog() method actually returns the index of the button pressed. Rather than create EventHandlers in the dialog that really have little to do with the dialog itself, you can respond to the user's choice within the calling object. Or not. Again, it's your choice.  :-) And finally, I've Javadoc'ed the code in the main places. Hopefully, this will make it easy to get up and running quickly and with a minimum of fuss. How Do I Get (Git?) It? To try out DialogFX, just point your browser here to the DialogFX GitHub repository and download away! Please take a look, try it out, and let me know what you think. All feedback welcome! All the best, Mark 

  Read the article

• Diagnosing ADF Mobile iOS deployment problems

  - by Chris Muir

  From time to time I encounter customers who have taken possession of a brand new Apple Mac, have that excited "I've just spent more on a computer then I ever wanted to but it's okay" crazy gleam in their eye, but on pre-loading all the necessary software for Oracle's ADF Mobile to start their mobile campaign, following Oracle's setup instructions and deploying their first app to Apple's XCode iPhone Simulator they hit this error message in the JDeveloper Log-Deployment window: [01:36:46 PM] Deployment cancelled. [01:36:46 PM] ----  Deployment incomplete  ----. [01:36:46 PM] Failed to build the iOS application bundle. [01:36:46 PM] Deployment failed due to one or more errors returned by '/Applications/Xcode.app/Contents/Developer/usr/bin/xcodebuild'.  The following is a summary of the returned error(s): Command-line execution failed (Return code: 69) "Oh, return code 69, I know that well" I hear you say.  Admittedly the error code is less than useful besides drawing some titters from the peanut gallery. Before explaining what's gone wrong, I think it's useful to teach customers how to diagnose these issues themselves.  When ADF Mobile commences a deployment, be it to Apple's iOS or Google's Android platforms, JDeveloper and ADF Mobile do a good job in the Log window of showing you what the deployment process entails.  In the case of deploying to iOS the log window will literally include the XCode commands executed to complete the deployment cycle. As example here's the log output that was produced before the error message was raised.... take the opportunity to read this line by line and note the command line calls highlighted in blue: (Note some of the following lines have been split over multiple lines to suit reading on this blog, each original line is preceded by a timestamp. Ensure to check the exact commands from JDev) [01:36:33 PM] Target platform is (iOS). [01:36:33 PM] Beginning deployment of ADF Mobile application 'LayoutDemo' to iOS using profile 'IOS_MOBILE_NATIVE_archive1'. [01:36:34 PM] Command-line executed: [/Applications/Xcode.app/Contents/Developer/usr/bin/xcodebuild, -version] [01:36:34 PM] Command-line execution succeeded. [01:36:34 PM] Running dependency analysis... [01:36:34 PM] Building... [01:36:34 PM] Deploying 3 profiles... [01:36:35 PM] Wrote Archive Module to /Users/chris/fmw/jdeveloper/jdev/extensions/ oracle.adf.mobile/Samples/PublicSamples/LayoutDemo/ApplicationController/ deploy/ApplicationController.jar [01:36:35 PM] WARNING: No Resource Catalog enabled ADF components found to package [01:36:36 PM] Wrote Archive Module to /Users/chris/fmw/jdeveloper/jdev/extensions/ oracle.adf.mobile/Samples/PublicSamples/LayoutDemo/ViewController/ deploy/ViewController.jar [01:36:36 PM] Verifying existence of the .adf source directory of the ADF Mobile application... [01:36:36 PM] Verifying Application Controller project exists... [01:36:36 PM] Verifying application dependencies... [01:36:36 PM] The application may not function correctly because the following dependent libraries are missing: /Users/chris/jdev/jdeveloper/jdeveloper/jdev/extensions/oracle.adf.mobile/ lib/adfmf.springboard.jar [01:36:36 PM] Verifying project dependencies... [01:36:36 PM] Validating application XML files... [01:36:36 PM] Validating XML files in project ApplicationController... [01:36:36 PM] Validating XML files in project ViewController... [01:36:40 PM] Copying common javascript files... [01:36:41 PM] Copying FARs to the ADF Mobile Framework application... [01:36:41 PM] Extracting Feature Archive file, "ApplicationController.jar" to deployment folder, "ApplicationController". [01:36:42 PM] Extracting Feature Archive file, "ViewController.jar" to deployment folder, "ViewController". [01:36:42 PM] Deploying skinning files... [01:36:43 PM] Copying the CVM SDK files built for the x86 processor... [01:36:43 PM] Copying the CVM JDK files built for the x86 processor... [01:36:43 PM] Command-line executed: [cp, -R, -p, /Users/chris/fmw/jdeveloper/jdev/extensions/oracle.adf.mobile/iOS/jvmti/x86/, /Users/chris/fmw/jdeveloper/jdev/extensions/oracle.adf.mobile/ Samples/PublicSamples/ LayoutDemo/deploy/IOS_MOBILE_NATIVE_archive1/temporary_xcode_project/lib] [01:36:43 PM] Command-line execution succeeded. [01:36:43 PM] Command-line executed: [cp, -R, -p, /Users/chris/fmw/jdeveloper/jdev/extensions/oracle.adf.mobile/iOS/jvmti/jar/, /Users/chris/fmw/jdeveloper/jdev/extensions/oracle.adf.mobile/Samples/ PublicSamples/LayoutDemo/deploy/IOS_MOBILE_NATIVE_archive1/ temporary_xcode_project/lib] [01:36:43 PM] Command-line execution succeeded. [01:36:43 PM] Copying security related files to the ADF Mobile Framework application... [01:36:44 PM] Command-line executed from path: /Users/chris/fmw/jdeveloper/jdev/extensions/oracle.adf.mobile/Samples/ PublicSamples/LayoutDemo/deploy/IOS_MOBILE_NATIVE_archive1/temporary_xcode_project/ [01:36:44 PM] Command-line executed: /Applications/Xcode.app/Contents/Developer/usr/bin/xcodebuild clean install -configuration Debug -sdk /Applications/Xcode.app/Contents/Developer/Platforms/iPhoneSimulator.platform/ Developer/SDKs/iPhoneSimulator6.1.sdk DSTROOT=/Users/chris/fmw/jdeveloper/jdev/extensions/oracle.adf.mobile/Samples/ PublicSamples/LayoutDemo/deploy/IOS_MOBILE_NATIVE_archive1/Destination_Root/ IPHONEOS_DEPLOYMENT_TARGET=5.0 TARGETED_DEVICE_FAMILY=1,2 PRODUCT_NAME=LayoutDemo ADD_SETTINGS_BUNDLE=NO As you can see when we move from JDeveloper undertaking its work, it then passes the code off in the last few lines for Apple's XCode to assemble and deploy the required .ipa file.  From the original error message which followed this complaining about xcodebuild failing with return code 69, we can quickly see the exact command line used to call xcodebuild. As this is the exact command line call with all its options, you're free to open a Terminal window in Mac OSX and execute the same command by simply copying and pasting the command line. And via this you'll then find out what return code actually 69 means.  Unfortunately it's not that exciting. For Macs that have just been installed and configured with XCode, XCode (and for that matter iTunes) which is required by ADF Mobile to deploy must have been run at least once before hand on your brand new Mac (to be clear that's once ever, not once every restart). On doing so you will be presented with a license agreement from Apple that you must accept. Only once you've done this will the command line calls work.  They're currently failing as you haven't accepted the legal terms and conditions. (arguably you an also accept the terms and conditions from the command line too, but ADF Mobile cannot do this on your behalf, so it's just easier to open the tools and confirm the legal requirements that way). Putting aside the error code and its meaning, watching the log window, watching what commands are executed, learning what they do, this will assist you to diagnose issues yourself and solve these sort of issues more relatively quickly.  From my perspective as an Oracle Product Manager, it allows me to say "this is the stuff you don't need to worry about when you use ADF Mobile when it's configured correctly" .... as you can see my salesman qualities shine through. For anyone who is happily using ADF Mobile on a Mac and wondering why you didn't hit these issues, it's quite likely that you already accepted the license conditions before deploying via ADF Mobile.  For instance, though I'm not a fan of iTunes itself, iTunes was one of the first things I loaded on my Mac to access my Justin Bieber albums. Image courtesy of winnond / FreeDigitalPhotos.net

  Read the article

• Let other computer view my localhost over a network...

  - by Smickie

  Hi, I have apache and what not running on my local machine (mac), there also another mac on the local network. How does this other machine access my localhost? For example I have a local website at example.local.net in my vhost. How can another computer on the network navigate to this site? Cheers!

  Read the article

• How to burn rEfit .cdr or .dmg in ubuntu or windows?

  - by beemzet

  Hi all, I don't have mac installed on my macbook pro, but I have Ubuntu and Windows. I was following this website http://mac.linux.be/content/single-boot-linux-without-delay to boot faster into Ubuntu without a 30 second delay. But I can't even burn a rEfit cdr image. Do you know how to burn it? Thanks

  Read the article

• virsh XML interface allocation

  - by Kaushik Koneru

  I am trying to launch VM using a XML. This VM will be having 5 interfaces each connected to certain bridge. Issue here is allocation of these interfaces is random. My XML <interface type='bridge'> <mac address='52:54:00:9f:14:b3'/> <source bridge='br0'/> <target dev='vnet1'/> <model type='e1000'/> <alias name='net0'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x03' function='0x0'/> </interface> <interface type='bridge'> <mac address='52:54:00:9f:14:b4'/> <source bridge='br1'/> <target dev='vnet2'/> <model type='e1000'/> <alias name='net1'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x10' function='0x0'/> </interface> <interface type='bridge'> <mac address='52:54:00:9f:14:b5'/> <source bridge='br2'/> <target dev='vnet2'/> <model type='e1000'/> <alias name='net3'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x12' function='0x0'/> </interface> <interface type='bridge'> <mac address='52:54:00:9f:14:c4'/> <source bridge='br3'/> <target dev='vnet3'/> <model type='e1000'/> <alias name='net4'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x18' function='0x0'/> </interface> Allocation of interfaces are random mean e th6 will be connected to br3 ; eth7 -- br4 eth8 -- br2 eth9 -- br0. Is there any way to make it static?? At the same time is there anyway of assigning IP Address to these eth interfaces through XML file itself??

  Read the article

• Why is user asked to choose their workgroup?

  - by Clinton Blackmore

  We running Mac OS X Server 10.5.8 with Mac OS X 10.5.8 clients. Students use network logins to, well, log in. I've been asked to deny internet access to a specific user. I was told that a good way to do it is to create a user workgroup called "No Internet Access" and manage settings there. (Specifically, I told parental controls to allow access to no sites, and blacklisted all the installed web browsers). Now, when the user authenticates to log in, they are greeted with this dialog: Workgroups for <username> Grade 7 Students No Internet Access It is unlikely that the student would willing choose "No Internet Access" to be their base group. Looking in Workgroup Manager at the student's record, it shows their primary group ID is the grade 7 group, and "No Internet Access" is listed as another group they belong to. I looked at the managed preferences for all the computers pertaining to logins. They are set to their defaults. Specifically, the computer groups' preference for Logins - Access has the defaults: [unchecked] Ignore workgroup nesting [checked] Combine available workgroup settings Based on my reading of Tips and Tricks for Mac Administrators, this should be correct, the user should not be asked which group they belong to, and settings from all applicable groups should be applied. How can I achieve that result? Edit: I've decided to add some additional information from the Tips and Tricks for Mac Management White Paper (via Apple in Education, via the author's site). On page 21, it says: With Leopard MCX, workgroup preference settings are combined by default into a single set of values. This means that instead of having to choose between the Math, Science, or Language Arts workgroups when logging in, a user can just authenticate and be taken directly to the desktop. All the settings for each of those workgroups are composited together, providing you with all the Dock items and a composite of all the other settings. On page 40, an example is given in which settings are combined from different 'domains', one computer group, two (user) workgroups, and one individual user's settings. [When johnd logs into a leopard client,] the items staged in the Dock from left to right are: computer group, first workgroup alphabetically, second workgroup, user. Items within the workgroup are staged alphabetically. Nowhere is there an indication that groups are nested; indeed, I can see no sensible (non-flat) heirarchy for groups like Math, Science, and Language Arts. I strongly believe that there is a way to apply settings from two unrelated user workgroups such that a user of OS X 10.5.x or newer does not need to choose their workgroup. This is what I seek to achieve.

  Read the article

• Cannot run a VM with more than three network interfaces with KVM

  - by Bostonvaulter

  I'm running KVM on top of Ubuntu 10.10 Server I can create VM's (Virtual Machine) and network interfaces fine but I cannot seem to add more than three network interfaces. As soon as I have a VM with four network interfaces it gets stuck on startup at the starting SeaBIOS page with this message: Starting SeaBIOS (version pre-0.6.1-20100702_143500-palmer) So far I've verified this with two VM's, a Ubuntu 10.10 desktop and a Vyatta router. The specific network hardware I assign to the VM's doesn't seem to matter. I'm trying to have one bridged interface and three private networks using Vyatta to route between them. Does anyone know why I can't run a VM with more than three network interfaces? Edit: Additionally the KVM thread responsible for the specific VM hangs using ~100% CPU (i.e. one core). Here's the command for the process that is hanging: /usr/bin/kvm -S -M pc-0.12 -enable-kvm -m 512 -smp 1,sockets=1,cores=1,threads=1 -name vyatta -uuid 6dff7c94-6810-423e-5fea-fec10da0e9b7 -nodefaults -chardev socket,id=monitor,path=/var/lib/libvirt/qemu/vyatta.monitor,server,nowait -mon chardev=monitor,mode=readline -rtc base=utc -boot c -drive file=/home/rams/virtual-machines/vyatta.img,if=none,id=drive-ide0-0-0,boot=on,format=raw -device ide-drive,bus=ide.0,unit=0,drive=drive-ide0-0-0,id=ide0-0-0 -drive if=none,media=cdrom,id=drive-ide0-1-0,readonly=on,format=raw -device ide-drive,bus=ide.1,unit=0,drive=drive-ide0-1-0,id=ide0-1-0 -device rtl8139,vlan=0,id=net0,mac=00:54:00:be:cc:4b,bus=pci.0,addr=0x3 -net tap,fd=97,vlan=0,name=hostnet0 -device rtl8139,vlan=1,id=net1,mac=52:54:00:da:59:ed,bus=pci.0,addr=0x5 -net tap,fd=98,vlan=1,name=hostnet1 -device rtl8139,vlan=2,id=net2,mac=52:54:00:ce:22:b6,bus=pci.0,addr=0x6 -net tap,fd=99,vlan=2,name=hostnet2 -device rtl8139,vlan=3,id=net3,mac=52:54:00:1e:bc:46,bus=pci.0,addr=0x7 -net tap,fd=101,vlan=3,name=hostnet3 -chardev pty,id=serial0 -device isa-serial,chardev=serial0 -usb -vnc 127.0.0.1:0 -k en-us -vga cirrus -device virtio-balloon-pci,id=balloon0,bus=pci.0,addr=0x4 Edit: I've also found an error in dmesg that might be related (it also shows up when running virtd in verbose mode): 14:47:24.399: warning : qemudParsePCIDeviceStrs:1422 : Unexpected exit status '1', qemu probably failed I've also tried disabling app armor but that doesn't seem to make a difference.

  Read the article

• Sharing mobile broadband between two MacBooks [closed]

  - by Poita_

  Possible Duplicates: Is there a software alternative to Mac OS X built in internet sharing services? How to troubleshoot problems sharing internet connection via WiFi on Mac OS X Me and my wife both have MacBooks (one regular, one MackBook Pro). We're staying in temporary accommodation with no internet so we got one of those mobile broadband USB dongles. We only have one (dongle) and were just wondering if there was anyway we can share the internet connection between the two MacBooks. Thanks in advance.

  Read the article

• HP to Cisco spanning tree root flapping

  - by Tim Brigham

  Per a recent question I recently configured both my HP (2x 2900) and Cisco (1x 3750) hardware to use MSTP for interoperability. I thought this was functional until I applied the change to the third device (HP switch 1 below) at which time the spanning tree root started flapping causing performance issues (5% packet loss) between my two HP switches. I'm not sure why. HP Switch 1 A4 connected to Cisco 1/0/1. HP Switch 2 B2 connected to Cisco 2/0/1. HP Switch 1 A2 connected to HP Switch 2 A1. I'd prefer the Cisco stack to act as the root. EDIT: There is one specific line - 'spanning-tree 1 path-cost 500000' in the HP switch 2 that I didn't add and was preexisting. I'm not sure if it could have the kind of impact that I'm describing. I'm more a security and monitoring guy then networking. EDIT 2: I'm starting to believe the problem lies in the fact that the value for my MST 0 instance on the Cisco is still at the default 32768. I worked up a diagram: This is based on every show command I could find for STP. I'll make this change after hours and see if it helps. Cisco 3750 Config: version 12.2 spanning-tree mode mst spanning-tree extend system-id spanning-tree mst configuration name mstp revision 1 instance 1 vlan 1, 40, 70, 100, 250 spanning-tree mst 1 priority 0 vlan internal allocation policy ascending interface TenGigabitEthernet1/1/1 switchport trunk encapsulation dot1q switchport mode trunk ! interface TenGigabitEthernet2/1/1 switchport trunk encapsulation dot1q switchport mode trunk ! interface Vlan1 no ip address ! interface Vlan100 ip address 192.168.100.253 255.255.255.0 ! Cisco 3750 show spanning tree: show spanning-tree MST0 Spanning tree enabled protocol mstp Root ID Priority 32768 Address 0004.ea84.5f80 Cost 200000 Port 53 (TenGigabitEthernet1/1/1) Hello Time 2 sec Max Age 20 sec Forward Delay 15 sec Bridge ID Priority 32768 (priority 32768 sys-id-ext 0) Address a44c.11a6.7c80 Hello Time 2 sec Max Age 20 sec Forward Delay 15 sec Interface Role Sts Cost Prio.Nbr Type ------------------- ---- --- --------- -------- -------------------------------- Te1/1/1 Root FWD 2000 128.53 P2p MST1 Spanning tree enabled protocol mstp Root ID Priority 1 Address a44c.11a6.7c80 This bridge is the root Hello Time 2 sec Max Age 20 sec Forward Delay 15 sec Bridge ID Priority 1 (priority 0 sys-id-ext 1) Address a44c.11a6.7c80 Hello Time 2 sec Max Age 20 sec Forward Delay 15 sec Interface Role Sts Cost Prio.Nbr Type ------------------- ---- --- --------- -------- -------------------------------- Te1/1/1 Desg FWD 2000 128.53 P2p Cisco 3750 show logging: %LINEPROTO-5-UPDOWN: Line protocol on Interface Vlan1, changed state to down %LINEPROTO-5-UPDOWN: Line protocol on Interface Vlan100, changed state to down %LINEPROTO-5-UPDOWN: Line protocol on Interface Vlan1, changed state to up %LINEPROTO-5-UPDOWN: Line protocol on Interface Vlan100, changed state to up %LINEPROTO-5-UPDOWN: Line protocol on Interface Vlan1, changed state to down %LINEPROTO-5-UPDOWN: Line protocol on Interface Vlan1, changed state to up HP Switch 1: ; J9049A Configuration Editor; Created on release #T.13.71 vlan 1 name "DEFAULT_VLAN" untagged 1-8,10,13-16,18-23,A1-A4 ip address 100.100.100.17 255.255.255.0 no untagged 9,11-12,17,24 exit vlan 100 name "192.168.100" untagged 9,11-12,17,24 tagged 1-8,10,13-16,18-23,A1-A4 no ip address exit vlan 21 name "Users_2" tagged 1,A1-A4 no ip address exit vlan 40 name "Cafe" tagged 1,4,7,A1-A4 no ip address exit vlan 250 name "Firewall" tagged 1,4,7,A1-A4 no ip address exit vlan 70 name "DMZ" tagged 1,4,7-8,13,A1-A4 no ip address exit spanning-tree spanning-tree config-name "mstp" spanning-tree config-revision 1 spanning-tree instance 1 vlan 1 40 70 100 250 password manager password operator HP Switch 1 show spanning tree: show spanning-tree Multiple Spanning Tree (MST) Information STP Enabled : Yes Force Version : MSTP-operation IST Mapped VLANs : 2-39,41-69,71-99,101-249,251-4094 Switch MAC Address : 0021f7-126580 Switch Priority : 32768 Max Age : 20 Max Hops : 20 Forward Delay : 15 Topology Change Count : 363,490 Time Since Last Change : 14 hours CST Root MAC Address : 0004ea-845f80 CST Root Priority : 32768 CST Root Path Cost : 200000 CST Root Port : 1 IST Regional Root MAC Address : 0021f7-126580 IST Regional Root Priority : 32768 IST Regional Root Path Cost : 0 IST Remaining Hops : 20 Root Guard Ports : TCN Guard Ports : BPDU Protected Ports : BPDU Filtered Ports : PVST Protected Ports : PVST Filtered Ports : | Prio | Designated Hello Port Type | Cost rity State | Bridge Time PtP Edge ----- --------- + --------- ---- ---------- + ------------- ---- --- ---- A1 | Auto 128 Disabled | A2 10GbE-CX4 | 2000 128 Forwarding | 0021f7-126580 2 Yes No A3 10GbE-CX4 | Auto 128 Disabled | A4 10GbE-SR | Auto 128 Disabled | HP Switch 1 Logging: I removed the date / time fields since they are inaccurate (no NTP configured on these switches) 00839 stp: MSTI 1 Root changed from 0:a44c11-a67c80 to 32768:0021f7-126580 00839 stp: MSTI 1 Root changed from 32768:0021f7-126580 to 0:a44c11-a67c80 00842 stp: MSTI 1 starved for an MSTI Msg Rx on port A4 from 0:a44c11-a67c80 00839 stp: MSTI 1 Root changed from 0:a44c11-a67c80 to 32768:0021f7-126580 00839 stp: MSTI 1 Root changed from 32768:0021f7-126580 to 0:a44c11-a67c80 00839 stp: MSTI 1 Root changed from 0:a44c11-a67c80 to ... HP Switch 2 Configuration: ; J9146A Configuration Editor; Created on release #W.14.49 vlan 1 name "DEFAULT_VLAN" untagged 1,3-17,21-24,A1-A2,B2 ip address 100.100.100.36 255.255.255.0 no untagged 2,18-20,B1 exit vlan 100 name "192.168.100" untagged 2,18-20 tagged 1,3-17,21-24,A1-A2,B1-B2 no ip address exit vlan 21 name "Users_2" tagged 1,A1-A2,B2 no ip address exit vlan 40 name "Cafe" tagged 1,13-14,16,A1-A2,B2 no ip address exit vlan 250 name "Firewall" tagged 1,13-14,16,A1-A2,B2 no ip address exit vlan 70 name "DMZ" tagged 1,13-14,16,A1-A2,B2 no ip address exit logging 192.168.100.18 spanning-tree spanning-tree 1 path-cost 500000 spanning-tree config-name "mstp" spanning-tree config-revision 1 spanning-tree instance 1 vlan 1 40 70 100 250 HP Switch 2 Spanning Tree: show spanning-tree Multiple Spanning Tree (MST) Information STP Enabled : Yes Force Version : MSTP-operation IST Mapped VLANs : 2-39,41-69,71-99,101-249,251-4094 Switch MAC Address : 0024a8-cd6000 Switch Priority : 32768 Max Age : 20 Max Hops : 20 Forward Delay : 15 Topology Change Count : 21,793 Time Since Last Change : 14 hours CST Root MAC Address : 0004ea-845f80 CST Root Priority : 32768 CST Root Path Cost : 200000 CST Root Port : A1 IST Regional Root MAC Address : 0021f7-126580 IST Regional Root Priority : 32768 IST Regional Root Path Cost : 2000 IST Remaining Hops : 19 Root Guard Ports : TCN Guard Ports : BPDU Protected Ports : BPDU Filtered Ports : PVST Protected Ports : PVST Filtered Ports : | Prio | Designated Hello Port Type | Cost rity State | Bridge Time PtP Edge ----- --------- + --------- ---- ---------- + ------------- ---- --- ---- A1 10GbE-CX4 | 2000 128 Forwarding | 0021f7-126580 2 Yes No A2 10GbE-CX4 | Auto 128 Disabled | B1 SFP+SR | 2000 128 Forwarding | 0024a8-cd6000 2 Yes No B2 | Auto 128 Disabled | HP Switch 2 Logging: I removed the date / time fields since they are inaccurate (no NTP configured on these switches) 00839 stp: CST Root changed from 32768:0021f7-126580 to 32768:0004ea-845f80 00839 stp: IST Root changed from 32768:0021f7-126580 to 32768:0024a8-cd6000 00839 stp: CST Root changed from 32768:0004ea-845f80 to 32768:0024a8-cd6000 00839 stp: CST Root changed from 32768:0024a8-cd6000 to 32768:0004ea-845f80 00839 stp: CST Root changed from 32768:0004ea-845f80 to 32768:0024a8-cd6000 00435 ports: port B1 is Blocked by STP 00839 stp: CST Root changed from 32768:0024a8-cd6000 to 32768:0021f7-126580 00839 stp: IST Root changed from 32768:0024a8-cd6000 to 32768:0021f7-126580 00839 stp: CST Root changed from 32768:0021f7-126580 to 32768:0004ea-845f80

  Read the article

• Controller Device for Media Center Computer

  - by kristof

  I am in the process of deciding on what to choose a a controller for a Media Center Computer. I have seen the question Best Keyboard with a built-in pointing device for a media center Mac but it doesn't have many answers, perhaps because of the Mac in the title. I am looking for something like a keyboard with a tracking device, but perhaps there are other alternatives. What would be your recommendations?

  Read the article

• structure of ethernet frame (tcp/udp) [closed]

  - by rtmrtm2

  How is an ethernet-frame structured. is it: |MAC | |_______________| | |IP | | |___________| | |TCP | | |_______| | |HTTP| |__________|____| or the other way around? so in words: is the mac wrapped around the ip wrapped around the tcp wrapped arround the http? can someone post an image of the specific 'wrapping'? thanks in advance. regards, rtmrtm2

  Read the article

• What are some of the best wireless routers for a price-conscious home power-user?

  - by Alain

  I'm extremely dissatisfied with the 'popular' choice for routers in homes and small offices. They are expensive (upwards of 60$), lack a great deal of useful configuration options, and seem to need to be restarted quite often. (Linksys comes to mind). I've been on the market for a good router lately, and slowly collecting a set of requirements I feel good routers should meet. Maximum number of TCP/IP connections. - This isn't something I see any routers advertise, but in terms of supporting torrent applications, I've been screwed by routers that support less than 20 here. From what I understand a fairly standard number is 200, but there are not so expensive routers that support thousands. Router configuration menu - Most have standard menu's that let you set up basic things like your wireless network encryption settings, uPnP, and maybe even DMZ (demilitarized zones). An absolute requirement for me, however, are routers with good enough firmware to support: Explicit Port forwarding Assigning static local ips to specific mac addresses, or at least Port forwarding by MAC address Port, IP and MAC filtering Dynamic DNS service for home users who want to set up a server but have a dynamic IP Traffic shaping (ideally) - giving priority to packets from certain machines or over certain ports. Strong wireless signal - If getting a reliable signal requires me to be so close to the router that I can connect an Ethernet cable, it's not good enough. As many Ethernet ports as possible. - Because I want to be able to switch from console gaming to PC gaming without visiting my router. So far, the best thing I've stumbled upon (in the bargain bin at staples) was a 20$ retail plus router. It was meant to be the cheapest alternative until I could find something better to purchase online, but I was actually blown away by the firmware capabilities. It supports defining reserved bandwidth for certain network traffic, dynamic DNS, reserving local IPs for specific MAC addresses, etc. At 2 am when my roommate is killing our Internet with their torrents, I can limit their bandwidth without outright blacklisting them. I have, however, met serious limitations when it comes to network traffic between local machines. It claims a 300Mbps connection, but I have trouble streaming videos from my PC to my console or other laptops wirelessly. It has a meltdown and needs to be reset once in a while (no more than a couple times a month), and it's got a 200 connection limit. There 4 Ethernet ports in the back but I'm pretty sure the first doesn't work. So some great answers to this question would be: Any metrics you use to compare routers, and requirements you have for new candidates. The best routers you've found for supporting home servers, file management systems, high volume torrent traffic, good price/feature ratio, etc. Good configuration advice (aside from 'use Ethernet whenever possible') Thanks for your feedback and experiences!

  Read the article

• How to excludes some files in rsync

  - by Mirage

  I am backing up data from a folder in MAC. The MAC unnecessarily creates some files startinmg with . like .dsdfsd or ._hjdds Now i want to exclude the files starting with . in rsync . How can i do that

  Read the article

• Unable to connect to MSN network with Adium

  - by Adam Driscoll

  I'm new to the Mac world and tried both MSN Messenger for Mac (7.0 and 8.0 beta) as well as Adium to connect to the Windows network. I've enable 'Allow all incoming connections' in the Firewall settings. Windows Live Messenger works fine when connecting through the same router on my Windows laptop. I've triple checked my password and verified it through a web browser and Windows Live. Any ideas what my issue could be?

  Read the article

• Port forwarding to a computer with two NICs

  - by howdyHey

  I have a laptop which occasionally uses Ethernet and most of the time WiFi. Now I want to forward a port in the router so that it always points to my current IP. I'm likely to get different IPs from time to time and I can't really use a dedicated IP for the machine since the IPs are assigned by MAC address and the wireless card has a different MAC address than the Ethernet port. I'm using a NetGear CG3100 router.

  Read the article

• Free, cross-platform screen recording utility

  - by abc

  I am looking for a screen recording (video) utility. Desired features are: It should be free (higher in priority) It should be available for Windows, Linux, and Mac (Mac in lower priority, Linux or Windows will work) It should have mic input facility to record external sound as well as machine's sound. It should have highlighting functionality (lower in priority)

  Read the article

• Process limit for user in Linux

  - by BrainCore

  This is the standard question, "How do I set a process limit for a user account in Linux to prevent fork-bombing," with an additional twist. The running program originates as a root-owned Python process, which then setuids/setgids itself as a regular user. As far as I know, at this point, any limits set in /etc/security/limits.conf do not apply; the setuid-ed process may now fork bomb. Any ideas how to prevent this?

  Read the article

• Process limit for user in Linux

  - by BrainCore

  This is the standard question, "How do I set a process limit for a user account in Linux to prevent fork-bombing," with an additional twist. The running program originates as a root-owned Python process, which then setuids/setgids itself as a regular user. As far as I know, at this point, any limits set in /etc/security/limits.conf do not apply; the setuid-ed process may now fork bomb. Any ideas how to prevent this?

  Read the article

• How can I resolve this one application coming up with an "You don't have permission to use the application" error?

  - by morgant

  I've got a Mac OS X 10.6 Snow Leopard Server Open Directory Master with a user who's getting Mobility & Application managed preferences from a group (the only group they're a member of). The workstation is also running Mac OS X 10.6 Snow Leopard, when the user logs in and tries to run our primary application which they're explicitly allowed to run (via the group's preferences), it says "You don't have permission to use the application 'Blah'". Now, the application is added to the group's list of always allowed applications, unsigned (so a minor difference in application version or file contents shouldn't disallow it). It even lives in a subdirectory of /Applications which is in the list of folders to allow applications. I've run into this when logging this user into new workstations and the following usually works: Log them out Remove the following files from their mobile home folder on the workstation: /Library/Managed\ Preferences/, ~/.FileSync, ~/Library/Preferences/com.apple.finder.plist, and ~/Library/Preferences/com.apple.MCX.plist. Remove the following files from their network home folder on the server: ~/.FileSync, ~/Library/Preferences/com.apple.finder.plist, and ~/Library/Preferences/com.apple.MCX.plist. Log them back in on the workstation. However, this no longer resolves the issue. Their Home Sync preferences are set (on the group) to sync ~, but not the following files (manually, at login, and at logout... no background sync here): ~/.SymAVQSFile ~/NAVMac800QSFile ~/Library ~/.FileSync ~/.account Their Preferences Sync preferences are set (also on the group) to sync ~/Library & ~/Documents/Microsoft User Data, but not the following files (also manually, at login, and at logout... no background sync): ~/.SymAVQSFile ~/.Trash ~/.Trashes ~/Documents/Microsoft User Data/Entourage Temp ~/Library/Application Support/SyncServices ~/Library/Application Support/MobileSync ~/Library/Caches ~/Library/Calendars/Calendar Cache ~/Library/Logs ~/Library/Mail/AvailableFeeds ~/Library/Mail/Envelope Index ~/Library/Preferences/Macromedia/ ~/Library/Printers ~/Library/PubSub/Database ~/Library/PubSub/Downloads ~/Library/PubSub/Feeds ~/Library/Safari/Icons.db ~/Library/Safari/HistoryIndex.sk ~/Library/iTunes/iPhone Software Updates IMAP-* Exchange-* EWS-* Mac-* ~/Library/Preferences/ByHost ~/Library/Preferences/com.apple.dock.plist ~/Library/Preferences/com.apple.sitebarlists.plist ~/Library/Application Support/4D ~/Library/Preferences/com.apple.MCX.plist ~/.FileSync ~/.account Even with ~/Library/Preferences/com.apple.MCX.plist prevented from syncing during a Preferences Sync, it still seems to show up in the network home on the server frequently. Are there any other files other than ~/Library/Preferences/com.apple.MCX.plist that contain application Managed Preferences that might be causing this one app to be showing up as not allowed? Any ideas on how ~/Library/Preferences/com.apple.MCX.plist keeps getting sync'd back up the network home folder on the server? Update: I thought I had found a workaround this morning, but it also seemed to be extremely temporary. Basically, loking at /Library/Managed\ Preferences/[shortname]/com.apple.applicationaccess.new.plist I discovered that it didn't have an entry for the application in question, but /Library/Managed\ Preferences/[shortname]/complete.plist did. Naturally, I deleted com.apple.applicationaccess.new.plist, logged in again, and it worked... on one workstation. It failed on others, and after logging out & back in a couple more times it started failing on all of them again, even after further deletions of com.apple.applicationaccess.new.plist. Oddly, com.apple.applicationaccess.new.plist & complete.plist do both contain an entry for the application in question now, but it still says it's not allowed. Further Update: Okay, so I now have a reproducible workaround which seems to be required after every reboot of the workstation: Log in as the user (you'll discover you cannot launch the application in question). Fast User Switch to the local admin account on the workstation (we always have one on every machine). From that local admin account, run sudo mcxrefresh -n 'shortname' (logging out and back in as the user in question will not work). Fast User Switch back to the user (you'll still not be allowed to run the application). Log the user out and back in (you'll now be able to run the application in question.) Fast User Switch back to the local admin account, log it out, and log back in as the user in question. If you do all that exactly as described it'll keep working through log out & log back in, but NOT through a reboot. If, after a reboot, you try something like logging in as the local admin account, running sudo mcxrefresh -n 'shortname', logging out, then logging in as the user in question, it will NOT work. Yet Another Update We don't have any computer groups in our Open Directory, so it shouldn't be getting any conflicting settings from there. I ran sudo mcxquery -format xml -user shortname -group groupname before & after performing the aforementioned process to allow the application in question to be run and the results were identical (saved the result to files & diff'd... I'm not just guessing here). One Step Forward, Half a Step Back: When the Mac OS X 10.6.5 Server update was released, we upgraded our Open Directory Master to it as the changes included the following managed preferences fixes which I hoped might address this issue: Addresses an issue that could prevent managed preferences from being applied when a user logs in on a workstation that has been idle. Fixes an issue that could prevent administrators from bypassing client management settings on a workstation. This seemed to improve the situation slightly. The application in question now usually launches without error. If, and when it does launch with the "You don't have permission to use the application" error, logging the user out and back in seems to correct it. That said, we've since had to add a couple of applications to the user's ~/Applications/ directory and those are still prevented from launching. The workstations are running Mac OS X 10.6.4, the OD Master (which the workstations are bound to) is running Mac OS 10.6.5 Server (although there are two OD Replicas still running 10.6.4 Server), and we're using Workgroup Manager 10.6.3 (which is included with the Server Admin Tools 10.6.5 upgrade) to add the applications (unsigned, as always). This time, I've caught the following in /var/log/system.log when attempting to launch one of the allowed applications from ~/Applications: Dec 22 17:36:24 hostname parentalcontrolsd[43221]: -[ActivityTracker checkApp:csFlags:] [954:username] -- *** Incoming app appears to be masquerading as white listed app and failed signature validation: /Users/username/Applications/FileMaker Pro 5.5/FileMaker Pro.app/Contents/MacOS/FileMaker Pro. Note: This may be a valid app of a different version than what was whitelisted (on a different volume?) Dec 22 17:36:24 hostname [0x0-0xa42a42].com.filemaker.filemakerpro[43304]: launch of /Users/username/Applications/FileMaker Pro 5.5/FileMaker Pro.app/Contents/MacOS/FileMaker Pro was blocked Dec 22 17:36:24 hostname com.apple.launchd.peruser.1340[6375] ([0x0-0xa42a42].com.filemaker.filemakerpro[43304]): Exited with exit code: 255 Dec 22 17:36:24 hostname parentalcontrolsd[43221]: -[ActivityTracker(Private) _removeAppFromWhiteList:] [1362:username] -- *** Couldn't find local user record Running sudo mcxquery -format xml -user username -group groupname includes the following entry for FileMaker Pro 5.5 (and appears to include a full integration of the user's application whitelist & group's application whitelist): <dict> <key>bundleID</key> <string>com.filemaker.filemakerpro</string> <key>displayName</key> <string>FileMaker Pro</string> </dict> Note the lack of <key>appID</key><data> ... </data> which seems to specify a signed application. While whitelisted directories also appear to be correctly listed in the results, they too do not actually allow the applications to be run either. What is going on here?! Where else should I be looking?

  Read the article

• How do I swap the Windows and Control keys in Windows 7?

  - by Ellioote Rusty Harold

  I'm used to a Mac keyboard and that means my finger expect to find the shortcut key to the left of the spacebar. How can I turn the Windows key (command key on a Mac keyboard) into the Control key and vice versa?

  Read the article

• run growlnotify over ssh

  - by CCG121

  I am trying to run growl notify over ssh like so ssh [email protected] "growlnotify -m test" is run I get bash: growlnotify command not found however running it straight from the mac it runs fine am I missing something simple or is there a really complex reason this won't work? ps. ssh keys are enabled in both directions edit: I logged into the mac from a remote machine over ssh and tried to run it and it ran fine so it seems to just affect the one line login and run way and DrC tried that cated the .profile to .bashrc

  Read the article

• Man broke, possibly on installing git, how do I fix?

  - by Emd

  I am running Mac snow leopard 10.6.3 and I used a mac installer program for git that was designed originally for leopard. I think since then my man pages have been broken and attempting to look up any command makes my computer stall for a bit before returning 'no manpage found.' Where do I begin fixing this? Thanks.

  Read the article

< Previous Page | 196 197 198 199 200 201 202 203 204 205 206 207  | Next Page >