Search Results

Search found 36169 results on 1447 pages for 'boost program options'.

Page 201/1447 | < Previous Page | 197 198 199 200 201 202 203 204 205 206 207 208  | Next Page >

• Logitech USB headphones detected and selected in Debian Squeeze but sound still coming from speakers

  - by mattalexx

  I have a pair of Logitech wireless USB headphones that work with Ubuntu Natty but aren't working in Debian Squeeze. When they are selected as the default audio output, the sound comes out of the speakers instead of the headphones. I have rebooted and tried using a different USB port. My computer is a Thinkpad T510. How can I fix this problem? Here is lsusb: Bus 002 Device 005: ID 046d:0a29 Logitech, Inc. Bus 002 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 005: ID 046d:c52f Logitech, Inc. Wireless Mouse M305 Bus 001 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Here is cat /proc/asound/cards 0 [Intel ]: HDA-Intel - HDA Intel HDA Intel at 0xf2420000 irq 17 1 [Headset ]: USB-Audio - Logitech Wireless Headset Logitech Logitech Wireless Headset at usb-0000:00:1d.0-1.1, full speed 2 [NVidia ]: HDA-Intel - HDA NVidia HDA NVidia at 0xcdefc000 irq 17 Here is the gnome-volume-control GUI: Here's lsmod | grep usb: snd_usb_audio 50670 0 snd_usb_lib 11192 1 snd_usb_audio usbhid 28008 0 hid 50909 1 usbhid snd_rawmidi 12513 2 snd_usb_lib,snd_seq_midi snd_hwdep 4054 2 snd_usb_audio,snd_hda_codec snd_pcm 47226 3 snd_usb_audio,snd_hda_intel,snd_hda_codec usbcore 98969 5 snd_usb_audio,snd_usb_lib,usbhid,ehci_hcd snd 34423 11 snd_usb_audio,snd_rawmidi,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_seq,snd_timer,snd_seq_device nls_base 4541 1 usbcore Here's cat /etc/modprobe.d/alsa-base.conf: # autoloader aliases install sound-slot-0 /sbin/modprobe snd-card-0 install sound-slot-1 /sbin/modprobe snd-card-1 install sound-slot-2 /sbin/modprobe snd-card-2 install sound-slot-3 /sbin/modprobe snd-card-3 install sound-slot-4 /sbin/modprobe snd-card-4 install sound-slot-5 /sbin/modprobe snd-card-5 install sound-slot-6 /sbin/modprobe snd-card-6 install sound-slot-7 /sbin/modprobe snd-card-7 # Cause optional modules to be loaded above generic modules install snd /sbin/modprobe --ignore-install snd && { /sbin/modprobe --quiet snd-ioctl32 ; /sbin/modprobe --quiet snd-seq ; } install snd-rawmidi /sbin/modprobe --ignore-install snd-rawmidi && { /sbin/modprobe --quiet snd-seq-midi ; : ; } install snd-emu10k1 /sbin/modprobe --ignore-install snd-emu10k1 && { /sbin/modprobe --quiet snd-emu10k1-synth ; : ; } # Prevent abnormal drivers from grabbing index 0 options bt87x index=-2 options cx88_alsa index=-2 options snd-atiixp-modem index=-2 options snd-intel8x0m index=-2 options snd-via82xx-modem index=-2 # Keep snd-pcsp from beeing loaded as first soundcard options snd-pcsp index=-2 # Keep snd-usb-audio from beeing loaded as first soundcard options snd-usb-audio index=-2 EDIT In VLC, I reset VLC prefs (Output: Default) and sound still comes out of speakers as expected. Then I change it to "Output: ALSA Audio output" and a Device menu appears. I select the headphones. When I then save the prefs, the audio switch to the headphones! But here's what's weird: I go back to prefs, change it to "Output: Default" and the headphones keep working. Maybe the ALSA option is actually what is being chosen as the "Default" option, but the Device menu (whose selection is still being used) is still set to the headphones. Anyway, now I need to figure out how to make it work as the default for the whole system.

  Read the article

• What is blocking incoming packets to port 67?

  - by Peter Robertson

  I have a DSP connected to a Windows 7 laptop by Ethernet. The laptop has all firewalls disabled (I've even tried stopping the Windows firewall service and DHCP). The DSP is sending well-formed BOOTP broadcast packets every 3 seconds to port 67. Wireshark running on the laptop sees these BOOTP packets coming in. I have a program running on the laptop with a socket successfully bound to port 67. I can see this using CurrPorts.exe. Nothing else is shown as accessing port 67. The program never sees any packets coming in. If I run a program in the DSP that sends ordinary UDP packets to port 67, Wireshark sees them coming in and reports that they are corrupt BOOTP packets, but now, my program gets them. Any idea what's going on here?

  Read the article

• OOP for unit testing : The good, the bad and the ugly

  - by Jeff

  I have recently read Miško Hevery's pdf guide to writing testable code in which its stated that you should limit your classes instanciations in your constructors. I understand that its what you should do because it allow you to easily mock you objects that are send as parameters to your class. But when it comes to writing actual code, i often end up with things like that (exemple is in PHP using Zend Framework but I think it's self explanatory) : class Some_class { private $_data; private $_options; private $_locale; public function __construct($data, $options = null) { $this->_data = $data; if ($options != null) { $this->_options = $options; } $this->_init(); } private function _init() { if(isset($this->_options['locale'])) { $locale = $this->_options['locale']; if ($locale instanceof Zend_Locale) { $this->_locale = $locale; } elseif (Zend_Locale::isLocale($locale)) { $this->_locale = new Zend_Locale($locale); } else { $this->_locale = new Zend_Locale(); } } } } Acording to my understanding of Miško Hevery's guide, i shouldn't instanciate the Zend_Local in my class but push it through the constructor (Which can be done through the options array in my example). I am wondering what would be the best practice to get the most flexibility for unittesing this code and aswell, if I want to move away from Zend Framework. Thanks in advance

  Read the article

• Problems serving SVN over HTTPS on Ubuntu 10.04

  - by odd parity

  We've been experiencing some problems with our Subversion server after upgrading to Ubuntu 10.04. When trying to access a repository, regardless of client (I've tried git-svn and svn on Windows as well as svn on Ubuntu 10.04, from different computers and network locations), I get a 400 bad request. Here's the output from svn: svn: Server sent unexpected return value (400 Bad Request) in response to OPTIONS request for 'https://svn.example.org/svn/programs' Here are the relevant entries from the Apache logs (I'm running Apache 2.2): error.log [Mon Jun 14 11:29:31 2010] [error] [client x.x.x.x] request failed: error reading the headers ssl_access.log x.x.x.x - - [14/Jun/2010:11:29:28 +0200] "OPTIONS /svn/programs HTTP/1.1" 401 2643 "-" "SVN/1.6.6 (r40053) neon/0.29.0" x.x.x.x - - [14/Jun/2010:11:29:31 +0200] "ction-set/></D:options>OPTIONS /svn/programs HTTP/1.1" 400 644 "-" "SVN/1.6.6 (r40053) neon/0.29.0" If anyone has run into similar problems or could give me a pointer to track down the cause of this I'd be very grateful - I'd really like to avoid having to downgrade the box again.

  Read the article

• libsasl2 change paths

  - by mk_89

  I have been following the tutorial https://help.ubuntu.com/community/Postfix for installing Postfix on ubuntu. Im stuck at the Authenication section of the tutorial where you change paths to live in the false root, if you look at the link above I have a file (/etc/default/saslauthd) which is pretty much the same as the one from the tutorial. saslauthd # This needs to be uncommented before saslauthd will be run automatically START=yes PWDIR="/var/spool/postfix/var/run/saslauthd" PARAMS="-m ${PWDIR}" PIDFILE="${PWDIR}/saslauthd.pid" # You must specify the authentication mechanisms you wish to use. # This defaults to "pam" for PAM support, but may also include # "shadow" or "sasldb", like this: # MECHANISMS="pam shadow" MECHANISMS="pam" # Other options (default: -c) # See the saslauthd man page for information about these options. # # Example for postfix users: "-c -m /var/spool/postfix/var/run/saslauthd" # Note: See /usr/share/doc/sasl2-bin/README.Debian #OPTIONS="-c" #make sure you set the options here otherwise it ignores params above and will not work OPTIONS="-c -m /var/spool/postfix/var/run/saslauthd" When I run the following command in ubuntu dpkg-statoverride --force --update --add root sasl 755 /var/spool/postfix/var/run/saslauthd I get the following error dpkg-statoverride: warning: An override for '/var/spool/postfix/var/run/saslauthd' already exists, but --force specified so will be ignored. dpkg-statoverride: warning: --update given but /var/spool/postfix/var/run/saslauthd does not exist I don't why this is happening, I literally followed the tutorial step by step and have installed all the packages necessary, what could be the problem? do I have to manually create

  Read the article

• access_log item w/out IP. Starts with "::1 - - [<date>]"

  - by Meltemi

  Looking at our Apache log I see normal requests like: 174.133.xxx.xxx - - [20/May/2010:17:36:44 -0700] "GET /index.html HTTP/1.1" 200 2004 but every so often i get a cluster of these w/out an IP address. ::1 - - [20/May/2010:18:47:21 -0700] "OPTIONS * HTTP/1.0" 200 - ::1 - - [20/May/2010:18:47:22 -0700] "OPTIONS * HTTP/1.0" 200 - ::1 - - [20/May/2010:18:47:23 -0700] "OPTIONS * HTTP/1.0" 200 - what do they mean and curious what causes them?

  Read the article

• replacing the default console emulator under Windows XP

  - by Gilles

  How can I replace the default program providing console windows under Windows XP? I know of alternative programs, and I have a shortcut to start cmd.exe in Console2. But now I want console applications to start in Console2 rather than the default console program, even when I have no control over the program that starts the console application. (I.e. a non-console program starts consoleapp.exe, and I can't change it to start Console2 instead, but I still want the application to be started inside a new instance of Console2.) (Note that I want to replace the console itself, that is, the window in which console (i.e. text mode) applications run. And I must be able to run arbitrary, unmodified console applications: a substitute for a specific console program such as Cmd won't do me any good.) EDIT: So what I'm after is a CSRSS replacement, which leads to OT: I want to know when Microsoft is going to make a decent CSRSS replacement. Not being able to adjust the width of a "terminal" by resizing the window is a complete joke. Go download the ISE already. (It's included in Win7/2008R2.) But as far as I understand this ISE is an environment for Powershell, not a general console emulator.

  Read the article

• where.exe does not find OpenSSL libs when %ProgramFiles% variable is used in the PATH environment variable

  - by Piotr Dobrogost

  I installed both 32bit and 64bit version of OpenSSL libs on Vista x64. The 32bit version was installed in c:\Program Files (x86)\OpenSSL and the 64bit version was installed in c:\Program Files\OpenSSL. Then I added the entry %ProgramFiles%\OpenSSL to the PATH environment variable. %ProgramFiles%\OpenSSL is expanded to c:\Program Files (x86)\OpenSSL for 32bit programs and it's expanded to c:\Program Files\OpenSSL for 64bit programs. The idea is to have 32bit programs use 32bit version of OpenSSL libs and 64bit programs use 64bit version. I wanted to check if this works by running 32bit cmd.exe and issuing where ssleay32.dll and then by running 64bit cmd.exe and issuing the same. However in both cases I get the error INFO: Could not find files for the given pattern(s). What's wrong? This is a follow up to Different PATH environment variable for 32bit and 64bit Windows - is it possible?

  Read the article

• .htaccess do not work without index.php on CodeIgniter

  - by Mattia

  I have read a lot of topic with the same problem but I do not find the solution. I have a LAMP into Ubuntu server. My document root is /home/utente/ into this dir I have another dir (turni) with a CodeIgniter web app. The web app works fine with the index.php into the URL, but I want to eliminate it. I have this configuration: config.php into CodeIgniter: $config['index_page'] = ''; .htaccess: RewriteEngine On RewriteBase / RewriteCond %{REQUEST_URI} ^system.* RewriteRule ^(.*)$ /index.php?/$1 [L] RewriteCond %{REQUEST_URI} ^application.* RewriteRule ^(.*)$ /index.php?/$1 [L] RewriteCond %{REQUEST_FILENAME} !-f RewriteCond %{REQUEST_FILENAME} !-d RewriteRule ^(.*)$ index.php?/$1 [L] /etc/apache2/sites-available/default: <VirtualHost *:80> ServerAdmin webmaster@localhost DocumentRoot /home/utente <Directory /> Options FollowSymLinks AllowOverride None </Directory> <Directory /home/utente/> Options Indexes FollowSymLinks MultiViews AllowOverride None Order allow,deny allow from all </Directory> ScriptAlias /cgi-bin/ /usr/lib/cgi-bin/ <Directory "/usr/lib/cgi-bin"> AllowOverride None Options +ExecCGI -MultiViews +SymLinksIfOwnerMatch Order allow,deny Allow from all </Directory> ErrorLog ${APACHE_LOG_DIR}/error.log # Possible values include: debug, info, notice, warn, error, crit, # alert, emerg. LogLevel warn CustomLog ${APACHE_LOG_DIR}/access.log combined Alias /doc/ "/usr/share/doc/" <Directory "/usr/share/doc/"> Options Indexes MultiViews FollowSymLinks AllowOverride None Order deny,allow Deny from all Allow from 127.0.0.0/255.0.0.0 ::1/128 </Directory> When I open a link of the web app without index.php into the URL, the server show me this error: The requested URL /turni/auth/login was not found on this server. Why? If I put the index.php like /turni/index.php/auth/login all works fine.

  Read the article

• How to make Unity 3D work with Bumblebee using the Intel chipset

  - by EboMike

  I have a Sony VAIO S laptop with the dreaded Optimus and finally managed to get Bumblebee to work fully on Ubuntu 12.04 so that I can utilize both the hardware acceleration of the Intel chipset as well as the Nvidia one via optirun and/or bumble-app-settings. However, the desktop effects don't work. But they should, I vaguely remember that they worked for a while before I had Bumblebee installed. This is what I get with the support test: :~$ /usr/lib/nux/unity_support_test -p Xlib: extension "NV-GLX" missing on display ":0". OpenGL vendor string: Tungsten Graphics, Inc OpenGL renderer string: Mesa DRI Intel(R) Ivybridge Mobile OpenGL version string: 1.4 (2.1 Mesa 8.0.2) Not software rendered: yes Not blacklisted: yes GLX fbconfig: yes GLX texture from pixmap: yes GL npot or rect textures: yes GL vertex program: yes GL fragment program: yes GL vertex buffer object: no GL framebuffer object: yes GL version is 1.4+: yes Unity 3D supported: no First of all, I kind of doubt that the chipset doesn't support VBOs (essentially a standard feature in GL). Neither Xorg.0.log nor Xorg.8.log show any particular errors. As for the Nvidia drivers: In order to get them to work, I had to install the 304.22 drivers (older ones wouldn't work). They clobbered libglx.so, so I reinstated the xserver-xorg-core libglx.so in its original place, moved Nvidia's libglx.so to an nvidia-specific folder and specified that folder in the bumblebee.config. That seems to work and shouldn't cause the problem I see here. For fun, I tried to use the Nvidia chipset for Unity, but that didn't fly either: ~$ optirun /usr/lib/nux/unity_support_test -p OpenGL vendor string: NVIDIA Corporation OpenGL renderer string: GeForce GT 640M LE/PCIe/SSE2 OpenGL version string: 4.2.0 NVIDIA 304.22 Not software rendered: yes Not blacklisted: yes GLX fbconfig: yes GLX texture from pixmap: no GL npot or rect textures: yes GL vertex program: yes GL fragment program: yes GL vertex buffer object: yes GL framebuffer object: yes GL version is 1.4+: yes Unity 3D supported: no

  Read the article

• Problem in Installing Wordpress

  - by Hajloo

  I try to install Wordpress in a Windows Client with WebPI which provided by Microsoft. I had tostop installation process 3 time and installing PHP and mysql Extention manually. but everytime I continue setup by WebPi andfinally it show me a success message. But when I try to see installed wordpress in my client I see this Your PHP installation appears to be missing the MySQL extension which is required by WordPress. I asked it in StackOverFlow here but I couln't get the right answer. I install everything in **C:\Program files\** so these are the location C:\Program Files\MySQL\MySQL Server 5.1 C:\Program Files\Php C:\Program Files\ext mysql root password: admin wordpress database : wordpress wordpress database password : 123 here is my php.ini

  Read the article

• Exchange Server 2007 message tracking log tuning ?

  - by Albert Widjaja

  Hi All, what is the best practice if I want to have a retention of let say 6 months ? I'm confused which parameter that is should/can be changes. Get-ExchangeServer | where {$_.isHubTransportServer -eq $true} | Get-TransportServer | select Name, *MessageTracking* | ft -AutoSize Name MessageTrackingLogEnabled MessageTrackingLogMaxAge MessageTrackingLogMaxDirectorySize MessageTrackingLogMaxFileSize MessageTrackingLogPat h ---- ------------------------- ------------------------ ---------------------------------- ----------------------------- --------------------- ExHTServer1 True 20.00:00:00 250MB 10MB D:\Program Files\M... ExHTServer2 True 20.00:00:00 250MB 10MB D:\Program Files\M... ExHTServer3 True 20.00:00:00 250MB 10MB D:\Program Files\M... Thanks, Albert

  Read the article

• Bridge and OpenVPN with shorewall

  - by Javier Martinez

  I have this scenario and everything it's working OK, but I want to configure my Shorewall and I can't do it. My interfaces are: br0 (bridge of eth0) tun0 (OpenVPN) vnet* (each one of bridged interfaces with public IP's) Public Main IP: 188.165.X.Y OpenVPN IP's: 172.28.0.x Bridge: public ip's So, I have the next configuration for shorewall: /etc/shorewall/zones #ZONE TYPE OPTIONS IN OUT # OPTIONS OPTIONS fw firewall inet ipv4 road ipv4 /etc/shorewall/interfaces #ZONE INTERFACE BROADCAST OPTIONS inet br0 detect routeback road tun+ detect routeback /etc/shorewall/policy #SOURCE DEST POLICY LOG LIMIT: CONNLIMIT: # LEVEL BURST MASK $FW all ACCEPT inet $FW DROP info road all DROP inet road DROP /etc/shorewall/tunnels #TYPE ZONE GATEWAY GATEWAY # ZONE openvpnserver:1194 inet 0.0.0.0/0 The problem is that even with shorewall running I am able to ping or connect to the virtual machines behind the bridge

  Read the article

• Can I set my Optimus Nvidia card to run Unity3D with bumblebee?

  - by manuhalo

  I'd like to know whether I can run compiz on my Nvidia card to speed things up. It's a Dell XPS15 laptop but I'm mostly using it as a desktop, so battery life is not important. Apparently my Intel integrated card is able to run unity 3D, but my Nvidia GT 420M is not. Here's the output of unity_support_test, both with optirun and without it: manuhalo@Ubuntu-XPS-L501X:~$ optirun /usr/lib/nux/unity_support_test -p OpenGL vendor string: NVIDIA Corporation OpenGL renderer string: GeForce GT 420M/PCI/SSE2 OpenGL version string: 4.1.0 NVIDIA 280.13 Not software rendered: yes Not blacklisted: yes GLX fbconfig: yes GLX texture from pixmap: no GL npot or rect textures: yes GL vertex program: yes GL fragment program: yes GL vertex buffer object: yes GL framebuffer object: yes GL version is 1.4+: yes Unity 3D supported: no manuhalo@Ubuntu-XPS-L501X:~$ /usr/lib/nux/unity_support_test -p OpenGL vendor string: Tungsten Graphics, Inc OpenGL renderer string: Mesa DRI Intel(R) Ironlake Mobile OpenGL version string: 2.1 Mesa 7.11 Not software rendered: yes Not blacklisted: yes GLX fbconfig: yes GLX texture from pixmap: yes GL npot or rect textures: yes GL vertex program: yes GL fragment program: yes GL vertex buffer object: yes GL framebuffer object: yes GL version is 1.4+: yes Unity 3D supported: yes Any ideas of why this is happening? Thanks in advance to anyone able to shed some light on this. What I have tried: Installed the v290 drivers from the x-stable PPA. Tried forcing Unity-3D to work by telling Unity to ignore the unity-support-test results i.e. gksudo gedit /etc/environment add the following UNITY_FORCE_START=1 to the end of the file.

  Read the article

• Data Movement and the Decision Matrix

  - by BuckWoody

  Maybe it’s my military background, or maybe I’ve always had this predilection, but I like to use two devices when I need to make a complex decision: A checklist and a decision matrix. I like to use a checklist because it ensures that I remember the big bits of what I need to do, and brings up questions or areas that I didn’t think about when evaluating options for the decision. And the decision matrix – that’s the thing I use to actually lay out those options. It’s simply a spreadsheet-like grid (I use Excel, but paper and pencil works as well) that lays out the requirements or advantages for the decision across the top, and the options I have on the left-hand side. Then in the “cells” I put whether or not that option on the left will meet the requirement in that column. I then simply “weight” each cell to organize the choices by best-fit. The right answer (or answers) will float right to the top. I was asked yesterday about options for moving data in SQL Server to another system. There are just dozens of ways to do this, from bcp to Replication, each with certain advantages and costs. But asking the questions for the top row first helped me show the person that it isn’t a particular technology that is important, it’s laying out those requirements and thinking about which elements are more important than the other. For instance, is it more important to have the data moved all the time, or is it OK if that happens once in a while? Does the data have to move in two directions or just one? All of these will help that answer jump right out. Try it sometime – it’s a great learning exercise, since it will force you to focus on filling out the matrix. The answer is out there, Neo. Share this post: email it! | bookmark it! | digg it! | reddit! | kick it! | live it!

  Read the article

• Wrong java -version being reported

  - by Malachi

  I am running Windows 7 Professional x64 and have the following Java versions installed: x64 C:\Program Files\Java jdk1.6.0_24 jdk1.7.0_04 jdk1.7.0_07 jre6 jre7 x86 C:\Program Files (x86)\Java jre1.6.0_07 jre6 jre7 in my environment variables I have my PATH containing C:\Program Files\Java\jdk1.6.0_24\bin and JAVA_HOME set to C:\Program Files\Java\jdk1.6.0_24\bin However running java -version reports java version "1.7.0_07" Java(TM) SE Runtime Environment (build 1.7.0_07-b10) Java HotSpot(TM) 64-Bit Server VM (build 23.3-b01, mixed mode) How is this the case when there is no reference to this version of Java in my Environment variables. Any help on this issue would be great as I am trying to run Apache ANT using Java 1.6.

  Read the article

• Service monitoring service, which I can ping instead of getting pinged

  - by Jack Juiceson

  I'm looking for a service, which can send me an alert if my program didn't ping(some http request) in X minutes. Pretty much like any service monitoring, but instead of service pinging my server I want, my program to ping the monitor service. This is because our program, can't get incoming connections, yet we need to monitor it's alive. And easiest for us will be to have a service we can ping. Thank you, - Jack

  Read the article

• Remove c:/windows/syswow64/msxml4.dll

  - by Rolf

  A program has installed c:/windows/syswow64/msxml4.dll on my hard drive. Sadly this is an old version (4.30.2100.0) with a security problem therefore I really wants to remove the file and the program that installed it. MSXML4 is not in the list of programs that I can uninstall under "Programs and features". Is there a way to find the program that installed it in windows 8.1? Hope some of you can help.

  Read the article

• Becoming a Certified Information Professional

  - by Lance Shaw

  Yesterday, we participated with AIIM in a webinar about the Certified Information Professional (CIP) program that they are now offering.  The interest level is very high in the program, as evidenced by the high turnout at the event. You might be asking yourself, what does the Oracle WebCenter team care about an AIIM certification program? Well, we sponsored this program because we consistently find that the more educated our customers and prospects are, the more value they are going to get out of the technology we provide.  As an ECM vendor, we provide plenty of WebCenter product training and certifications to help you make the most of WebCenter technology. While these are essential and valuable, technologists that also have an operational command of the business and the various impacts that the flow of information can have are even more valuable to an organization. Thinking about the management of content and information and its effect on business process can have wide-ranging benefits, not only to your company but to your personal bottom line.  And let's be honest, a customer who is looking holistically at how content is managed is going to see more opportunities to leverage that content and in many cases, this will motivate the purchase of additional product licenses.   Now if you are regretting the fact that you missed the webinar yesterday, never fear!  It is now available for playback and you can view it at your convenience by visiting the AIIM website. We hope you find it informative and that you can personally profit from being able to showcase your certification as an Information Professional. Additionally, we hope it will help you identify additional opportunities to leverage Oracle WebCenter in order to further reduce your operational costs and drive your business forward.

  Read the article

• Multicast hostname lookups on OSX

  - by KARASZI István

  I have a problem with hostname lookups on my OSX computer. According to Apple's HK3473 document it says for v10.6: Host names that contain only one label in addition to local, for example "My-Computer.local", are resolved using Multicast DNS (Bonjour) by default. Host names that contain two or more labels in addition to local, for example "server.domain.local", are resolved using a DNS server by default. Which is not true as my testing. If I try to open a connection on my local computer to a remote port: telnet example.domain.local 22 then it will lookup the IP address with multicast DNS next to the A and AAAA lookups. This causes a two seconds lookup timeout on every lookup. Which is a lot! When I try with IPv4 only then it won't use the multicast queries to fetch the remote address just the simple A queries. telnet -4 example.domain.local 22 When I try with IPv6 only: telnet -6 example.domain.local 22 then it will lookup with multicast DNS and AAAA again, and the 2 seconds timeout delay occurs again. I've tried to create a resolver entry to my /etc/resolver/domain.local, and /etc/resolver/local.1, but none of them was working. Is there any way to disable this multicast lookups for the "two or more label addition to local" domains, or simply disable it for the selected subdomain (domain.local)? Thank you! Update #1 Thanks @mralexgray for the scutil --dns command, now I can see my domain in the list, but it's late in the order: DNS configuration resolver #1 domain : adverticum.lan nameserver[0] : 192.168.1.1 order : 200000 resolver #2 domain : local options : mdns timeout : 2 order : 300000 resolver #3 domain : 254.169.in-addr.arpa options : mdns timeout : 2 order : 300200 resolver #4 domain : 8.e.f.ip6.arpa options : mdns timeout : 2 order : 300400 resolver #5 domain : 9.e.f.ip6.arpa options : mdns timeout : 2 order : 300600 resolver #6 domain : a.e.f.ip6.arpa options : mdns timeout : 2 order : 300800 resolver #7 domain : b.e.f.ip6.arpa options : mdns timeout : 2 order : 301000 resolver #8 domain : domain.local nameserver[0] : 192.168.1.1 order : 200001 Maybe it would work if I could move the resolver #8 to the position #2. Update #2 No probably won't work because the local DNS server on 192.168.1.1 answering for domain.local requests and it's before the mDNS (resolver #2). Update #3 I could decrease the mDNS timeout in /System/Library/SystemConfiguration/IPMonitor.bundle/Contents/Info.plist file, which speeds up the lookups a little, but this is not the solution.

  Read the article

• Which forum software has the most advanced community/GetSatisfaction type features?

  - by Gaia

  I need to assemble a GetSatisfaction/Lithium/Jive type support forum/community. The first is not available in the desired language and the last two are priced for the enterprise market. I did research some other options (open source or SaaS) but they all seem to be either: kind of dead (open source options) too focused in gathering ideas/feedback (uservoice) strictly support without the community/voting features (zendesk) I need an open forum (people powered support/UGC with community/voting features). Therefore I will have to do some of the work on my own. I want to piece things (plugins/mods/etc) on top of a standard forum platform to give it the features I need. For this purpose, I want to use a mature product with widespread userbase, active community and lots of plugin options. I believe most will agree that my options therefore are: vBulletin phpBB SMF Here are the questions: Which one of the three above offers the easier path towards the desired goal? Which one of the three above has the most advanced features related to the desired goal? Of course I dont expect anyone to know these answers cut and dry. I am hoping to hear some experiences and see some examples. Also, it would be great if both those questions had the same answer, but I am not going to get my hopes up... PS: I wish I could add the tags "phpbb" and "smf" ;)

  Read the article

• Delaying a Foreach loop half a second

  - by Sigh-AniDe

  I have created a game that has a ghost that mimics the movement of the player after 10 seconds. The movements are stored in a list and i use a foreach loop to go through the commands. The ghost mimics the movements but it does the movements way too fast, in split second from spawn time it catches up to my current movement. How do i slow down the foreach so that it only does a command every half a second? I don't know how else to do it. Please help this is what i tried : The foreach runs inside the update method DateTime dt = DateTime.Now; foreach ( string commandDirection in ghostMovements ) { int mapX = ( int )( ghostPostition.X / scalingFactor ); int mapY = ( int )( ghostPostition.Y / scalingFactor ); // If the dt is the same as current time if ( dt == DateTime.Now ) { if ( commandDirection == "left" ) { switch ( ghostDirection ) { case ghostFacingUp: angle = 1.6f; ghostDirection = ghostFacingRight; Program.form.direction = ""; dt.AddMilliseconds( 500 );// add half a second to dt break; case ghostFacingRight: angle = 3.15f; ghostDirection = ghostFacingDown; Program.form.direction = ""; dt.AddMilliseconds( 500 ); break; case ghostFacingDown: angle = -1.6f; ghostDirection = ghostFacingLeft; Program.form.direction = ""; dt.AddMilliseconds( 500 ); break; case ghostFacingLeft: angle = 0.0f; ghostDirection = ghostFacingUp; Program.form.direction = ""; dt.AddMilliseconds( 500 ); break; } } } }

  Read the article

• Filesystem fragmentation on the level of set of files

  - by trismarck

  The file is stored in blocks by the file system. The block is the smallest amount of data the file system can assign to store a file. The classical definition of a fragmented file is that the file is stored in blocks that are 'scattered' (that are physically non-contiguous) around the hard drive. What I want to ask about is this second type of fragmentation I've came up with. Lets suppose we install a program. This program has very many files. When the program starts, the program always loads the contents of those files sequentially. Now, even if the hard disk is defragmented, there is still a possibility that the files (but not the blocks building up to files) will be scattered on the disk and thus the program launch time will be longer. Actually, this time could be longer due to defragmentation of the disk, as the defragmentation process not only glues fragmented files but also moves some files to optimize free space chunks. The questions: is the type of fragmentation I mentioned relevant for the file system? is it possible to remedy this kind of fragmentation and if yes, how would you do it? Also, I'm not sure if this question should belong to superuser or to serverfault (as I guess the filesystem fragmentation is more important in the server environment).

  Read the article

• Linux - preventing an application from failing due to lack of disk space [migrated]

  - by Jernej

  Due to an unpredicted scenario I am currently in need of finding a solution to the fact that an application (which I do not wish to kill) is slowly hogging the entire disk space. To give more context I have an application in Python that uses multiprocessing.Pool to start 5 threads. Each thread writes some data to its own file. The program is running on Linux and I do not have root access to the machine. The program is CPU intensive and has been running for months. It still has a few days to write all the data. 40% of the data in the files is redundant and can be removed after a quick test. The system on which the program is running only has 30GB of remaining disk space and at the current rate of work it will surely be hogged before the program finishes. Given the above points I see the following solutions with respective problems Given that the process number i is writing to file_i, is it safe to move file_i to an external location? Will the OS simply create a new instance of file_i and write to it? I assume moving the file would remove it and the process would end up writing to a "dead" file? Is there a "command line" way to stop 4 of the 5 spawned workers and wait until one of them finishes and then resume their work? (I am sure one single worker thread would avoid hogging the disk) Suppose I use CTRL+Z to freeze the main process. Will this stop all the other processes spawned by multiprocessing.Pool? If yes, can I then safely edit the files as to remove the redundant lines? Given the three options that I see, would any of them work in this context? If not, is there a better way to handle this problem? I would really like to avoid the scenario in which the program crashes just few days before its finish.

  Read the article

• Do Windows Vista/7 have memory protection?

  - by winnewb

  Is it possible for a program to access another program's memory directly and read from (or write to) it, or to "inherit" the old contents of memory reclaimed from another program? (ie if it doesn't zero out memory before using it and just reads from unitialized memory directly)

  Read the article

< Previous Page | 197 198 199 200 201 202 203 204 205 206 207 208  | Next Page >