Search Results

Search found 5951 results on 239 pages for 'monitor calibration'.

Page 201/239 | < Previous Page | 197 198 199 200 201 202 203 204 205 206 207 208  | Next Page >

• Converting DisplayPort and/or HDMI to DVI-D?

  - by Jeff Atwood

  Newer Radeon video cards come with four ports standard: DVI (x2) HDMI DisplayPort If I want to run three 24" monitors, all of which are DVI only, from this video card -- is it possible to convert either the HDMI or DisplayPort to DVI? If so, how? And which one is easier/cheaper to convert? I did a little research and it looks like there isn't a simple "dongle" method. I found this DisplayPort to DVI-D Dual Link Adapter but it's $120; almost cheaper to buy a new monitor that supports HDMI or DisplayPort inputs at that point! There's also a HDMI to DVI-D adapter at Monoprice but I'm not sure it will work, either. AnandTech seems to imply that you do need the DisplayPort-to-DVI: The only catch to this specific port layout is that the card still only has enough TMDS transmitters for two ports. So you can use 2x DVI or 1x DVI + HDMI, but not 2x DVI + HDMI. For 3 DVI-derived ports, you will need an active DisplayPort-to-DVI adapter.

  Read the article

• Avoiding DNS timeouts when a dns server fails

  - by Neil Katin

  We have a small datacenter with about a hundred hosts pointing to 3 internal dns servers (bind 9). Our problem comes when one of the internal dns servers becomes unavailable. At that point all the clients that point to that server start performing very slowly. The problem seems to be that the stock linux resolver doesn't really have the concept of "failing over" to a different dns server. You can adjust the timeout and number of retries it uses, (and set rotate so it will work through the list), but no matter what settings one uses our services perform much more slowly if a primary dns server becomes unavailable. At the moment this is one of the largest sources of service disruptions for us. My ideal answer would be something like "RTFM: tweak /etc/resolv.conf like this...", but if that's an option I haven't seen it. I was wondering how other folks handled this issue? I can see 3 possible types of solutions: Use linux-ha/Pacemaker and failover ips (so the dns IP VIPs are "always" available). Alas, we don't have a good fencing infrastructure, and without fencing pacemaker doesn't work very well (in my experience Pacemaker lowers availability without fencing). Run a local dns server on each node, and have resolv.conf point to localhost. This would work, but it would give us a lot more services to monitor and manage. Run a local cache on each node. Folks seem to consider nscd "broken", but dnrd seems to have the right feature set: it marks dns servers as up or down, and won't use 'down' dns servers. Any-casting seems to work only at the ip routing level, and depends on route updates for server failure. Multi-casting seemed like it would be a perfect answer, but bind does not support broadcasting or multi-casting, and the docs I could find seem to suggest that multicast dns is more aimed at service discovery and auto-configuration rather than regular dns resolving. Am I missing an obvious solution?

  Read the article

• Why do I get a DegradedArray event with mdadm

  - by azera

  Hello Just so we're clear on what's happening: I bought 4 new sata 2 drives, with the intent of using them in a raid5 all drive are fully recognised by both my bios and my linux box (gentoo) I created a raid5 array, fiddled a bit with it to understand how it works, how to monitor ect At some point, this triggered a degradedarray event, even though the array is brand new. I tried to stopping the array and recreating a new array with the same drive but the new array starts degraded too. here is what I used to create it mdadm --create -l5 -n4 /dev/md/md0-r5 /dev/sdb /dev/sdd /dev/sde /dev/sdf here are the output from my /proc/mdstat and mdadm --detail --scan **mdstat** Personalities : [raid0] [raid1] [raid6] [raid5] [raid4] [raid10] md127 : active raid5 sdf[4] sde[2] sdd[1] sdb[0] 4395415488 blocks level 5, 64k chunk, algorithm 2 [4/3] [UUU_] [>....................] recovery = 2.8% (41689732/1465138496) finish=890.3min speed=26645K/sec unused devices: <none> **detail** ARRAY /dev/md/md0-r5 metadata=0.90 spares=1 UUID=453e2833:81f22a74:64188b84:66721085 As such I have a couple questions: does a raid5 array always start in degraded mode at first ? why does sdf have the number 4 between bracket instead of 3, why does it see a spare disk and why is the 4th drive marked with _ instead of U ? (bad configuration ?) How can I recreate the array from scratch, do i have to format each drive on its own before recreating it ? Thanks for any help, I'm not sure about what I should do at the moment

  Read the article

• Sniffing at work- How to detect

  - by coffeeaddict

  Because of the place I work has some real issues (people) especially in IT and the owner, I wonder if we are being sniffed. Is there any way to tell if on a Vista 64-bit machine: 1) In system logs some identification that would tell me that someone might log into my PC such as an Admin 2) Something in the logs that would give me a flag about maybe I'm being monitored some other way? 3) How can I be sure that my gmail, hotmail, and chat is not being sniffed. I know there are things like Simp, etc. I'm talking about specific hidden system signs either in registry or logs. Obviously I'm not going to raise any suspicion by me asking our network admin. I don't trust anyone at this company. is there a good way to basically monitor for this as an end user? Could someone log in and basically watch me work and if so, would there be any goodies left behind for me to find out if this has happened other than visual signs which would not be present...maybe some running processes?

  Read the article

• Nvidia Linux Driver Huge Resolution

  - by darxsys

  I'm trying to setup a working CUDA SDK on my Linux Mint. I'm new to Linux and everything connected with it. So, I tried following some steps on how to install CUDA. Firstly, I downloaded a Linux driver from here: http://developer.nvidia.com/cuda/cuda-downloads version 295.41. After that, I barely found a way to run it. I did it like this: 1. typed in sudo init 1 in terminal and switched to root 2. typed service mdm stop 3. ran the *.run file downloaded from the link above Then it started installing the driver. It gave some warning messages, but I ignored it. After installation, I typed init 5 and it came back to GUI screen, BUT everything is huge. I restarted, still huge. My screen resolution is 640x480 on a 17 inch laptop monitor. I tried running Nvidia X Server Settings, but it says: "You do not appear to be using Nvidia X Driver. Please edit your X configuration file." I tried that. Nothing happened. I cant change the resolution because that Nvidia Settings thing gives no options. Then I googled some things, installing some packages - nothing. The biggest problem is I don't understand whats really going on. My laptop is a Samsung with i7 and Nvidia Gt 650M with optimus. I cant even install bumblebee, but that is something I will try if I manage to get my resolution to default. Please, help!

  Read the article

• How to diagnose a hang when creating a new folder in explorer.exe

  - by Jack Ukleja

  I have been having some issues with explorer.exe hanging when I create a new folder. If I use Analyse Wait Chain in the Resource Monitor it says "One or more threads of explorer.exe are waiting to finish network I/O". When I look at the offending thread in Process Explorer it reveals nothing interesting: ntdll.dll!ZwWaitForMultipleObjects+0xa KERNELBASE.dll!GetCurrentThread+0x36 kernel32.dll!WaitForMultipleObjectsEx+0xb3 USER32.dll!PeekMessageW+0x1cd USER32.dll!MsgWaitForMultipleObjectsEx+0x2a USER32.dll!MsgWaitForMultipleObjects+0x20 SHELL32.dll!SHAppBarMessage+0x41e SHELL32.dll!DragAcceptFiles+0x2a3c SHELL32.dll!DragAcceptFiles+0x2a4f SHELL32.dll!Ordinal211+0x124 SHELL32.dll!SHChangeNotification_Unlock+0x12f4 USER32.dll!GetSystemMetrics+0x2b1 USER32.dll!IsDialogMessageW+0x19b USER32.dll!IsDialogMessageW+0x1e1 ntdll.dll!KiUserCallbackDispatcher+0x1f USER32.dll!PeekMessageW+0xba USER32.dll!PeekMessageW+0x89 SHELL32.dll!SHChangeNotification_Unlock+0xd9f SHELL32.dll!Ordinal885+0x1407 SHLWAPI.dll!SHRegGetUSValueW+0x306 kernel32.dll!BaseThreadInitThunk+0xd ntdll.dll!RtlUserThreadStart+0x21 While I was looking at the explorer.exe threads I did notice a fair few that talk about ETW (Event Tracing for Windows) so obviously explorer.exe uses tracing. So I decided to try and user TraceView.exe to try and listen in on the explorer.exe traces. The problem is TraceView requires some difficult-to-come-by stuff... either pdbs, or CTL files, and .TMF files. I tried using the explorer.pdb that comes with the Windows SDK but that did not work. I do not see explorer.exe in the "named providers". And I have no idea where to locate the ctl or .TMF files for explorer.exe. So the question is: Is there a way to view the ETW trace messages from explorer? Or shall I just not bother and go back to the age old technique of disabling every explorer extenion one-by-one in the hope its one of them. (Prefer the former as I like to get to the bottom of things!!)

  Read the article

• DEB: "Provides:" field ignored

  - by Creshal

  I need to replace a package with a custom one, which gets its own name (foo-origpackage). To allow it to be used as drop-in replacement, I added the Provides: origpackage line to the control file. apt-cache show foo-origpackage lists the "Provides" entry just fine. However, when I want to install a file depending on origpackage, it fails ("Package origpackage not installed"). Is there some distinction between "real" and virtual packages I'm missing? EDIT: To be precise, what I want to replace is xen-utils-common for Squeeze. My tao-xen-utils-common has the following control file: Source: tao-xen-utils-common Section: kernel Priority: optional Maintainer: Creshal <[email protected]> Build-Depends: debhelper Standards-Version: 3.8.0 Homepage: http://tao.at Package: tao-xen-utils-common Architecture: all Depends: gawk, lsb-base, udev, xenstore-utils, tao-firewall Provides: xen-utils-common Conflicts: xen-utils-common Replaces: xen-utils-common Description: Xen administrative tools - common files (modified) The userspace tools to manage a system virtualized through the Xen virtual machine monitor. Modified for use with TAO Firewall. Installing xen-utils-4.0 fails, however: foo@bar# apt-cache showpkg tao-xen-utils-common Package: tao-xen-utils-common Versions: 4.0.0-1tao1 (/var/lib/apt/lists/repo.tao.at_dists_stable_main_binary-amd64_Packages) (/var/lib/dpkg/status) Description Language: File: /var/lib/apt/lists/repo.tao.at_dists_stable_main_binary-amd64_Packages MD5: 7c2503f563fca13b33b4eb3cbcb3c129 Reverse Depends: tao-firewall,tao-xen-utils-common tao-firewall,tao-xen-utils-common Dependencies: 4.0.0-1tao1 - gawk (0 (null)) lsb-base (0 (null)) udev (0 (null)) xenstore-utils (0 (null)) tao-firewall (0 (null)) xen-utils-common (0 (null)) xen-utils-common (0 (null)) Provides: 4.0.0-1tao1 - xen-utils-common Reverse Provides: foo@bar# apt-get install xen-utils-4.0 Reading package lists... Done Building dependency tree Reading state information... Done The following extra packages will be installed: xen-utils-common Suggested packages: xen-docs-4.0 The following packages will be REMOVED: tao-xen-utils-common The following NEW packages will be installed: xen-utils-4.0 xen-utils-common Edit:foo@bar# apt-cache policy xen-utils-4.0 xen-utils-4.0: Installed: (none) Candidate: 4.0.1-4 Version table: 4.0.1-4 0 500 http://ftp.at.debian.org/debian/ stable/main amd64 Packages 4.0.1-4 0 500 http://security.debian.org/ stable/updates/main amd64 Packages

  Read the article

• vmware - ACE, Workstation - how to manage remoe clients??

  - by tom smith

  Hi. Exploring Vmware products/services and have a few questions. As I understand VM, you can use VMWare Workstation to create a VM of a target machine/box/OS. Let's call this VM, "foo". If I have 100 client PCs in my dept, and I want to install the VM (foo) on each client, and also manage the remote VM instances of (foo). How can I accompish this? Let's assume that the client machines are running Windows7, and have the vmplayer app installed on the box. I'm looking to do the following kinds of actions regarding the remote client machines: -Update the foo VM/image with new updated copies -Make sure that every VM "foo" has the same user, but a unique passwd -Monitor the traffic/status of each client VM "foo" oin each client -Start/Stop each client VN "foo" from the master console -Etc... Can this be accomplished? How would I do it, what services/products would I need? I've tried toalking to a few of the pre-sales guys in VMWare, and got nowhere, other than telling me to email my questions!! Looking at google shed more insight, but I still have questions. So, if you have detailed VMWare understanding, pointers to consultants, or resellers who can help, all pointers are greatly appreciated. Thanks -tom

  Read the article

• Win 2008 R2 - copying TO disk is very slow, copying FROM is more or less okay

  - by avs099

  I have Windows 2008 R2 SP1 with 4 identical SATA disks (Seagate Barracude 7200) in RAID 5 array. It has 4Gb of memory; all recent updates are installed. Problem: when I copy large file from one folder to another, I get about 10MB/s average speed. When I read this file from network share via 1Gbps connection - I get about 25-30 MB/s. Both numbers seems to be low for me - but specifically I'm very frustrated with low write speed. there is no antivirus, no hyper-v, it's just a fileserver - i when i do my tests nobody else reads/write from it (we have only 4 people in a team, so I'm sure). Not sure if that matters, but there is only 1 logic disk "C" with all available space (1400 GB). I'm not an admin at all, so I have no idea where to look and what other information to provide. I did run performance monitor with "% idle time", "avg bytes read", "avg byte write" - here is the screenshot: I'm not sure why there are such obvious spikes. Any idea? Please let me know if you need me to provide more information - what counters should I check, etc. I'm very eager to get this solved. Thank you. UPDATE: we have another Windows 2008 R2 SP1 server with 2 RAID1 arrays - one is disk C (where windows is installed, another one is disk E). It is running Hyper-V and does not have antivirus. I noticed the following behavior when I copy large file (few GBs): C - C: about 50MB/sec C - E: about 55MB/sec E - E: 8MB/sec!!! E - C: 8MB/sec!!! what could cause this?? E drive is RAID1 array from same Seagate Barracuda 1TB drives..

  Read the article

• How can I fix video tearing and pausing on Windows XP Flash videos?

  - by xvs

  I have what should be a reasonably fast PC: it's a Quadcore Intel 6600 at 2.4 GHz, 4MB of RAM, an ATI 3800 series video card and an LG L246WP monitor, which I selected particularly because it was supposed to work well with video and have no trails or other artifacts. So I should be able to play video with no problems. And I can, as long as that video isn't Flash video. With Flash, what I see is tearing, especially during pans, and pausing -- every few seconds the video pauses for about 300ms while the sound stays continuous. I tried going into the video card setup and changing vertical sync, pulldown detection, windows media video acceleration, deinterlacing and triple buffering. but no combination of settings I've tried has changed or corrected the problem in any way. I've also tried enabling and disabling hardware acceleration in the Flash settings, to no avail. This problem happens whether or not the video is streaming or has fully streamed in before playing. So, what can I do? Is this just a flash issue or is there a way to get it to work?

  Read the article

• Kernel Logging disabled?

  - by Tiffany Walker

  uname -a Linux host 2.6.32-279.9.1.el6.i686 #1 SMP Tue Sep 25 20:26:47 UTC 2012 i686 i686 i386 GNU/Linux And start ups: ls /etc/init.d/ abrt-ccpp certmonger dovecot irqbalance matahari-broker mdmonitor nfs proftpd rpcbind single ypbind abrtd cgconfig functions kdump matahari-host messagebus nfslock psacct rpcgssd smartd abrt-oops cgred haldaemon killall matahari-network mysqld ntpd qpidd rpcidmapd sshd acpid cpuspeed halt ktune matahari-rpc named ntpdate quota_nld rpcsvcgssd sssd atd crond httpd lfd ma tahari-service netconsole oddjobd rdisc rsyslog sysstat auditd csf ip6tables lvm2-lvmetad matahari-sysconfig netfs portreserve restorecond sandbox tuned autofs cups iptables lvm2-monitor matahari-sysconfig-console network postfix rngd saslauthd udev-post But when I installed CSF/LFD I am getting nothing. LFD does not create lfd.log and nor are any blocks being logged in /var/log/messages either from the firewall. This is not natural. I looked for klogd but maybe I am looking in the wrong place for it to see if it is enabled? ls /etc/init.d/syslog ls: cannot access /etc/init.d/syslog: No such file or directory Also noticed no syslog? Also noticed this: csf -d 84.113.21.201 Adding 84.113.21.201 to csf.deny and iptables DROP... iptables: No chain/target/match by that name. iptables: No chain/target/match by that name. I've never seen this before and this is a dedicated box. Also: ./csftest.pl Testing ip_tables/iptable_filter...OK Testing ipt_LOG...OK Testing ipt_multiport/xt_multiport...OK Testing ipt_REJECT...OK Testing ipt_state/xt_state...OK Testing ipt_limit/xt_limit...OK Testing ipt_recent...OK Testing xt_connlimit...OK Testing ipt_owner/xt_owner...OK Testing iptable_nat/ipt_REDIRECT...OK Testing iptable_nat/ipt_DNAT...OK RESULT: csf should function on this server iptables -L Chain INPUT (policy ACCEPT) target prot opt source destination Chain FORWARD (policy ACCEPT) target prot opt source destination Chain OUTPUT (policy ACCEPT) target prot opt source destination

  Read the article

• Video output vanishes and it isn't the video card... suggestions?

  - by Ira Baxter

  I have a high-end dual processor Dell workstation that operated for several years without problem. Recently, the video output has gone flaky, in the sense that after 2-3 days, it loses synch with the monitor (sometimes you can still see a hashed-mess of the what you expect to see on the screen). Poking at the keyboard, and accessing the file system on the machine from over the network, indicates that the machine is running fine and its just the video. A reboot fixes the problem... for another day or two. This in effect makes the machine unusable. So, I replaced the video card with an exact duplicate bought from e-bay. (I checked after the dupe arrived to be sure, yep, same model number). I still get the same behavior. So unless I believe that both video cards are broken the same way, I have to beleive this is a problem with the motherboard/power supply, neither of which I am inclined to replace. The only other possibility I can think of is a Windows update to the graphics driver. How would I check for this? Anybody had a similar problem? Otherwise we're junking what used to be a perfectly good machine. (Another couple of hours of more wasted effort and that's it in terms of economics anyway).

  Read the article

• Nagios command not transmitting all arguments

  - by markus

  I'm using the following service to monitor our postgres db from nagios: define service{ use test-service ; Name of servi$ host_name DEMOCGN002 service_description Postgres State check_command check_nrpe!check_pgsql!192.168.1.135!test!test!test notifications_enabled 1 } On the remote machine I've configured the command: command[check_pgsql]=/usr/lib/nagios/plugins/check_pgsql -H $ARG1$ -d $ARG2$ -l $ARG3$ -p $ARG4$ In the syslog I can see that command is executed, but there is only one argument transmitted: Oct 20 13:18:43 DEMOSRV01 nrpe[1033]: Running command: /usr/lib/nagios/plugins/check_pgsql -H 192.168.1.134 -d -l -p Oct 20 13:18:43 DEMOSRV01 nrpe[1033]: Command completed with return code 3 and output: check_pgsql: Database name is not valid - -l#012Usage:#012check_pgsql [-H <host>] [-P <port>] [-c <critical time>] [-w <warning time>]#012 [-t <timeout>] [-d <database>] [-l <logname>] [-p <password>] Oct 20 13:18:43 DEMOSRV01 nrpe[1033]: Return Code: 3, Output: check_pgsql: Database name is not valid - -l#012Usage:#012check_pgsql [-H <host>] [-P <port>] [-c <critical time>] [-w <warning time>]#012 [-t <timeout>] [-d <database>] [-l <logname>] [-p <password>] Why are arguments 2,3 and 4 missing?

  Read the article

• Mac OS Leopard: SyncServer process constantly using 100% CPU

  - by macca1

  I am running Leopard that I upgraded from Tiger. I've been noticing that every once in a while the SyncServer process starts up and eats up all the CPU. The fans will start going at full blast and the laptop will slow down to a crawl. I need to force quit the process from Activity Monitor to get it under control. It disappears for a while, but eventually gets started again. I do have an iphone as well that I sync so I'm wondering if syncServer might be an apple process checking for my phone plugged in. Edit: Tried iSync and the manual resetsync as suggested, but got this output: Vince-2:~ vince$ /System/Library/Frameworks/SyncServices.framework/Versions/A/Resources/resetsync.pl full 2010-03-12 08:03:50.230 perl[176:10b] SyncServer is unavailable: exception when connecting: connection timeout: did not receive reply PerlObjCBridge: NSException raised while sending reallyResetSyncData to NSObject object name: "ISyncServerUnavailableException" reason: "Can't connect to the sync server: NSPortTimeoutException: connection timeout: did not receive reply ((null))" userInfo: "" location: "/System/Library/Frameworks/SyncServices.framework/Versions/A/Resources/resetsync.pl line 16" ** PerlObjCBridge: dying due to NSException Vince-2:~ vince$ And during that syncServer started spinning up 95-100% just like it always does.

  Read the article

• Looking for an application that scrolls or pans netbook screens running Windows

  - by Rob

  I'm looking for a Windows 7 and XP compatible Windows desktop panning/scrolling tool. This is to solve a problem where some applications for example MSN have settings/preference Windows that are not resizeable. I have a Netbook with a small maximum screen resolution e.g. 1024x600. The fixed non-resizeable windows are too large for this display screen size so I cannot see all of the items on these windows, particularly the OK button to save settings. What I would like is a desktop scrolling/panning tool where if I move my mouse pointer to any edge of the display, it pans to show the region of the too-large-fixed window that I could not see. I use a Samsung N110 and Toshiba NB100 netbooks. I'm looking for: A general program that provides desktop panning/scrolling/expanded resolution to allow all regions of a non-resizeable fixed window Preferably a non-graphics hardware specific program but will accept a solution that works with both the above machines I'm NOT looking for (i.e. unsatisfactory answers others have asked that I've already searched and found): Advice on what programs to use that DON'T have the problem of fixed windows Alternative operating system solutions Plugging in an external monitor with larger resolution - I use this option but I need a solution when one is not available, e.g. while travelling etc Advice about not using small screen netbooks - I enjoy the compact convenience of them Advice about change the dpi settings in the Control Panel Display settings Advice about guesswork with the tab key to move the focus the off-screen item I cannot see Thank you in advance.

  Read the article

• Reduce power consumption of gaming computer while idle

  - by White Phoenix

  This is my current build: EVGA X58 (first generation) motherboard Intel i7 965 clocked @ 3.3 Ghz 3x DDR3-1600 Corsair RAM at stock timings and voltages Corsair AX750 80 Plus Gold PSU 1 Optical Drive 1 Seagate 7200.10 500 GB drive 2x Western Digital Caviar Black 1 TB drives OCZ Vertex 1 60 GB EVGA GTX 460 oc'd at 800/1600/1850 Antec 1200 case HT-Omega Striker 7.1 Sound Card Windows 7 32-bit Professional (PAE Enabled) I've already seen this post Reduce power use on computer and this post How do I lower power consumption of my computer and while useful, I'm looking for answers specific to my build and OS. I'm pretty sure this build is a energy-intensive build by default, but I want to try to reduce the amount of energy my build uses when I leave it idle (when I go to bed or go out, etc). The first requirement for this machine is that I need to leave it on, so I cannot turn it off while it's being unused. I run it as a file server for personal reasons and I also leave it on in case people leave me messages on various IM services and chat clients (IRC, MSN, Steam, XFire, Pidgin, etc). I'm also unable to replace the parts in my computer with a cheaper "greener" part. What are some ways to minimize the amount of power the machine uses? I'm already using a high efficiency power supply (80 Plus Gold), but I imagine there's other things that can be done in the BIOS and Windows' power settings to reduce power usage while I'm not using the computer. From what I can tell, I can't use Sleep since that'll disable network access (whole reason why I leave the computer on in the first place). I already turn off my monitor when it's not in use. I enabled Intel SpeedStep within the BIOS (I know, I have a 965 and why am I enabling SpeedStep?) Should I bring the graphics card back to stock speeds and lower the clock on the processor even more? Main reason why I'm asking is I think this computer alone is the reason why my power bill is high, so I want to reduce its consumption to as low as possible without having to shut the thing down.

  Read the article

• Linux DHCPD Mac-Address based Groups

  - by GruffTech

  Our Current DHCPD.conf looks like the following. subnet 10.0.32.0 netmask 255.255.255.0 { range 10.0.32.100 10.0.32.254; option subnet-mask 255.255.255.0; option broadcast-address 10.0.32.255; option domain-name-servers 208.67.222.222,208.67.220.220; option routers 10.0.32.5; host Dev-ABaird-W { hardware ethernet 00:1D:09:3E:49:13; fixed-address 10.0.32.94; } ... more static hosts .... } About as basic as it gets. The old router is 10.0.32.1, our company wanted to implement a squid proxy to better monitor web traffic while at work, and if necessary block large time-wasters, IE Facebook.com. However, we've quickly realized that this change has played a mean prank on our Polycom SIP Phones. Occasionally our phones will not ring, the end recipient hears ringing (this is artificially created by our PBX) however the handset never rings. The ONLY thing that has changed in our network is the option routers line. So, Since all Polycom MAC addresses begin with 00:04:F2 would it be possible in DHCP to say any 00:04:F2:::* MAC addresses get option routers 10.0.32.1, and anything else must talk with our Gateway?

  Read the article

• How to move a sata drive to a machine without AHCI mode

  - by Andrew Cooper

  I've got a Dell Inspiron 1545 on which the screen has died. I'm able to plug an external monitor into the Inspiron 1545 and it works fine, so the screen is the only issue. The OS is Win7. I'm trying to move the disk to a spare Dell Precision M90 laptop that I've got lying around. The problem is that almost as soon as the Windows logo appears in the boot sequence I get a BSOD with a STOP 0x0000007B message. Researching this message pointed to issues with SATA AHCI mode. I looked in the BIOS of the Inspiron 1545 and the controller was set to AHCI mode. I set it to ATA mode and tried to boot with the same drive and got the same result as on the Precision M90. Switching back to AHCI allowed the machine to boot correctly again. I checked the BIOS on the Precision M90 and it doesn't seem to support AHCI mode, although it is a SATA controller onboard. The BIOS is the latest A08 version available from Dell. Is there any way I can get this drive to boot in the M90 without reformatting it?

  Read the article

• Need advice on a monitoring, reminder and warning application.

  - by cbmeeks

  I am a developer that also has to monitor several things on different servers. Such as: 1) Did all of the MS SQL databases backup last night? 2) Did all of the MySQL databases backup last night? 3) Were the database dumps actually copied to the right folder? 4) How much free space is left on each server's hard drives? 5) How big are folders "abc", "def", "etc" getting? 6) Send emails/alerts when thresholds are reached Etc. Just basically something to help me NOT forget such important things. I thought about writing something myself but didn't want to waste the effort if something is already out there. I would also prefer one application instead of many if I could. Thanks. EDIT Forgot to mention the operating system. These run on Windows Server 2003 and/or 2008. In fact, what would be cool is a program that supports multiple servers from one machine. Something that can log into those servers.

  Read the article

• Firefox 3.6 and above. Always show one tab even if all tabs are closed like Firefox 3.0

  - by Jayapal Chandran

  I very much got used to Firefox 3.0. In that, to free the memory, I close all tabs but still the main Firefox window does not close. But in Firefox 3.6 and later if I want to close all tabs and if I do so then Firefox totally exists. This is not the case with 3.0. How to stop Firefox from not closing the main process even if I close all threads (tabs)? The autocomplete feature in the address bar of Firefox 3.6 and greater is in a dark blue color which makes me very much annoyed. With my environment and the monitor glare that is inducing anger in me, so how the color be changed to be like Firefox 3.0? Because you know that black and white are a neutral and good combination and since I have been working in Firefox 3.0 (and earlier versions) for a long time this new color change and other uncomfortable options are making me sick. To check CSS3 I need to use Firefox 3.5 and greater. Besides I like Firefox because it includes the W3C's recommendations so I can learn and test new recomendations from W3C.

  Read the article

• NX Client for Windows 7 Opens Remote Desktop in Multiple Windows

  - by Corey Kennedy

  What I'm trying to do: access my Ubuntu desktop remotely via NX Client on my Windows 7 laptop. My environment: server: Ubuntu 10.10 on AMD 1Ghz/512MB RAM PC client: Windows 7 on ThinkPad sl510 Software: server is running NXServer 3.4.0. Using xfce4 window manager. Laptop is using NXClient for Windows In my NX Client "Desktop" settings I've selected "Unix" and "Custom" for OS and environment. I've also specified "startxfce4" as the application to launch when NX connects. I am able to authenticate an NX session on my laptop. By this I mean, I can start the client on my laptop, enter credentials for my Linux user, and NX establishes a connection to the server and attempts to open a remote desktop window. The problem, though, is that this remote desktop is "fragmented" into many Windows. One window will display the bulk of my desktop (complete with desktop icons for "Home," "File System," and "Trash") while another window will contain the taskbar, and another window will contain the application strip. I can select each of these Windows individually, but I cannot click on any objects within them. I've searched Super User, Ubuntu Forums, NX help, Server Fault, and tried many Google searches - none have turned up another case of this particular problem. I'm stumped. Does anyone have any suggestions for what I might try? I'm guessing the problem has to do with my xfce config files, but I've only just setup this server - it's been a long time since I've used Linux and there's a lot I just don't know. What I am NOT trying to do: use Desktop sharing from Ubuntu, whereby I VNC into a desktop that I've already established on the server. I am trying to configure this Linux box as a headless server that I can stash someplace out-of-the-way in my house, then interact with through my laptop. I don't want to have a monitor or keyboard connected to the Linux box. Thanks for your help!

  Read the article

• Haproxy ACL for balance on URL request

  - by Elgreco08

  I'm usung Ubuntu with haproxy 1.4.13 version. Its load balancing two subdomains: app1.domain.com app2.domain.com now i want to be able to use ACL to send based on url request to the right backends For example: http://app1.domain.com/path/games/index.php sould be send to backend1 http://app1.domain.com/path/photos/index.php should be send to backend2 http://app2.domain.com/path/mail/index.php sould be send to backend3 http://app2.domain.com/path/wazap/index.php should be send to backend4 i did used the code the the following acl frontend http-farm bind 0.0.0.0:80 acl app1web hdr_beg(host) -i app1 # for http://app1.domain.com acl app2web hdr_beg(host) -i app2 # for http://app2.domain.com acl msg-url-1 url_reg ^\/path/games/.* acl msg-url-2 url_reg ^\/path/photos/.* acl msg-url-3 url_reg ^\/path/mail/.* acl msg-url-4 url_reg ^\/path/wazap/.* use_backend games if msg-url-1 app1web use_backend photos if msg-url-2 app2web use_backend mail if ..... backend games option httpchk GET /alive.php HTTP/1.1\r\nHost:\ app1.domain.com option forwardfor balance roundrobin server appsrv-1 192.168.1.10:80 check inter 2000 fall 3 server appsrv-2 192.168.1.11:80 check inter 2000 fall 3 backend photos option httpchk GET /alive.php HTTP/1.1\r\nHost:\ app2.domain.com option forwardfor balance roundrobin server appsrv-1 192.168.1.13:80 check inter 2000 fall 3 server appsrv-2 192.168.1.14:80 check inter 2000 fall 3 .... Since the path mail, photos...etc will be application pools on iis, i want to monitor them if they are alive, if the pool does not respond it should stop serving it. my problem is for sure in the regular expression in the ACL acl msg-url-4 url_reg ^\/path/wazap/.* What should i change in the ACL to make it work ? thanks for any hints

  Read the article

• 13" MacBook Pro with Win 7 and External VGA gets 640x480

  - by Jim McKeeth

  I have a brand new 13" MacBook Pro - 2.26 GHz and the NVIDIA 9400M Video card. I installed Windows 7 (final) in boot camp and booted up to Windows 7. Installed all the drivers from the Apple disk and it was working great. Then I attached the external VGA adapter (from apple) to connect to a projector and it dropped down at 640x480 resolution. No matter what I did it wouldn't let me change to a higher resolution if the external VGA was connected. Once it disconnects then it goes back to the normal resolution. If I am booted into Snow Leopard it works fine. I tried updating the NVIDIA drivers and it behaved exactly the same. Ultimately I want to get 1024x768 or better resolution when connected to an external display. If it isn't fixable then I am curious if anyone else has seen this, if it is a known issue, and who to contact for support (Apple, Microsoft or NVIDIA?) Update: Just attaching the Mini-DVI to VGA adapter kicks it into 640x480, no projector is required. I tried forcing the display driver from Generic PnP Monitor to one that supported 1024x768 and that didn't work either.

  Read the article

• Cacti is ignoring hash marks in interface aliases

  - by Matt Simmons

  I'm attempting to set up Cacti to monitor a router's interfaces, and I'm having trouble getting the graph templates to show the information that I'd like. Our interface configuration looks like this: interface GigabitEthernet3/6 description WalljackNumber # Server info no ip address no shutdown switchport switchport access vlan 116 switchport mode access ip dhcp snooping trust spanning-tree portfast The "Server Info" string is really just the machine name, and a short relevant description, such as "PolarSprings vmnic2". The important part appears to be that it follows the hashmark. When I run snmpwalk, I get the proper output: IF-MIB::ifAlias.230 = STRING: WalljackNumber # Server info But in Cacti, when I go into the graph templates and set the title to this: |host_description| - Traffic - |query_ifName| (|query_ifAlias|) All that shows up in the graph is: switchname - Traffic - Gi3/6 (WalljackNumber #) Which strikes me as a little weird. What I suppose MAY be happening is that somewhere in the cacti stream, it's interpreting # as being a comment and stripping everything after, but I'm not sure. I was hoping someone could tell me that this was a known documented behavior, or that I could change it in a setting that I wasn't aware of. The alternative answer is to change the delimiter from # to something else, but I've got over a thousand lit switchports on an old college infrastructure, and I'm not sure what else might be relying on them.

  Read the article

• How could Load average numbers from 'htop' exceed 100% CPU utlization?

  - by Joe Huang

  I use 'htop' to monitor my web server. It's recently quite loaded and the Load average is showing something like this: Load average: 3.10 2.56 1.63 I searched the web about these numbers and I found an article about it: http://blog.scoutapp.com/articles/2009/07/31/understanding-load-averages In the article, it says if I have 2 CPUs, 2.0 means 100% CPU utilization. And my VPS has two CPUs, so what does 3.1 mean? How could it exceed 100% CPU utilization? And from these numbers, does it mean I should be wary about the loading now? But the performance seems totally fine, and this is a managed VPS, the hosting company has not notified me any warning about it. During day time, Load average always show these high numbers... here is another snapshot while writing. Load average: 3.03 2.77 1.97 Load average: 0.41 1.29 1.60 <---- 5 more minutes later So I am wondering how much room left for this site to grow in current configurations? What kind of proactive actions I should take in advance? I don't want to wait until the server bursts. Thanks.

  Read the article

< Previous Page | 197 198 199 200 201 202 203 204 205 206 207 208  | Next Page >