Search Results

Search found 6164 results on 247 pages for 'sd card'.

Page 201/247 | < Previous Page | 197 198 199 200 201 202 203 204 205 206 207 208  | Next Page >

• Broadcom 4313 doesn't work following 12.04 upgrade

  - by Lucas

  I have an hp G62-228Ca laptop with a BCM4313 previously running Ubuntu 11.10. I ran the 12.04 upgrade last night without much thought. Following the upgrade and mandatory reboot, the wireless card no longer shows up in the network manager, the first time I've had any kind of issues with wireless under Ubuntu. I've done much Googling on the issue but so far I haven't found a permanent solution. Mucking around with some packages though (I've installed five different ones or so), I've managed to devise a workaround that I must run every time I boot the laptop. I have to remove the Broadcom STA driver and reinstall it. Inspiration taken from here: WiFi does not work, Broadcom STA Wireless driver does not work on a BCM4313 After the second modprobe command, the wireless reappears in the network manager and ten seconds after that I'm back on the wifi. If anyone can provide some advice on how to fix this permanently I will be extremely grateful. I'd rather not roll back to 11.10 or reinstall, but I will if I need to. Just let me know if you need the output from any terminal commands. Thanks in advance!

  Read the article

• JavaOne 2012 in Review

  - by Janice J. Heiss

  Noted freelance writer Steve Meloan has a new article up on otn/java, titled, “JavaOne 2012 Review: Make the Future Java” in which he summarizes the happenings at JavaOne 2012. Along the way, he reminds us that if the future turns out to be anything like the past, Java will do fine: The repeated theme for this year's conference was ‘Make the Future Java,’ and according to recent stats, the groundwork is already firmly in place:    There are 9 million Java developers worldwide.    Three billion devices run Java.    Five billion Java Cards are in use.    One hundred percent of Blu-ray Disc players ship with Java.    Ninety-seven percent of enterprise desktops run Java.    Eighty-nine percent of PC desktops run Java.This year's content curriculum program was organized under seven technical tracks:    Core Java Platform    Development Tools and Techniques    Emerging Languages on the JVM    Enterprise Service Architectures and the Cloud    Java EE Web Profile and Platform Technologies    Java ME, Java Card, Embedded, and Devices    JavaFX and Rich User Experiences”Meloan artfully reminds us of how JavaOne makes learning fun. Have a look at the article here.

  Read the article

• How can I disable the purple bootloader splash at boot?

  - by wim

  This question has been answered before, but neither of the methods in the accepted answer worked for me on 11.10. First I tried editing in /etc/default/grub, and then running sudo update-grub. But after that I still got a blank, plain, purple screen while the kernel is loading. The screen has no boot options, and it obscures those dmesg that I want to see going in the terminal. Next I tried removing the plymouth-theme-*, but that just broke my gnome-shell theme looks, and the purple screen still remains. I have also tried configuring it with startupmanager package, but nothing seems to get rid of that darned purple splash. here are the contents of my /etc/default/grub file: # If you change this file, run 'update-grub' afterwards to update # /boot/grub/grub.cfg. # For full documentation of the options in this file, see: # info -f grub -n 'Simple configuration' GRUB_DEFAULT="0" GRUB_HIDDEN_TIMEOUT="0" GRUB_HIDDEN_TIMEOUT_QUIET="true" GRUB_TIMEOUT="0" GRUB_DISTRIBUTOR="`lsb_release -i -s 2> /dev/null || echo Debian`" #GRUB_CMDLINE_LINUX_DEFAULT="" GRUB_CMDLINE_LINUX_DEFAULT="" GRUB_CMDLINE_LINUX="" # Uncomment to enable BadRAM filtering, modify to suit your needs # This works with Linux (no patch required) and with any kernel that obtains # the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...) #GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef" # Uncomment to disable graphical terminal (grub-pc only) # GRUB_TERMINAL="console" # The resolution used on graphical terminal # note that you can use only modes which your graphic card supports via VBE # you can see them in real GRUB with the command `vbeinfo' #GRUB_GFXMODE="640x480" # Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux #GRUB_DISABLE_LINUX_UUID="true" # Uncomment to disable generation of recovery mode menu entries #GRUB_DISABLE_RECOVERY="true" # Uncomment to get a beep at grub start #GRUB_INIT_TUNE="480 440 1" GRUB_DISABLE_OS_PROBER="true"

  Read the article

• No sound Ubuntu 12.04 through HDMI

  - by MikeMan

  Specs: Asus G73JH i7/720; ATI Mobility 5870 I have read through a lot of threads on getting HDMI sound to work and non of them have fixed my issue. Granted I am very new to Linux and know only the GUI aspect of what it does from finding similarities that Windows 7 has. I would like to become a Linux Power User and I figured this would be a good step to get started. I was able to successfully install my graphics driver and it shows in use. I connect the HDMI to my HD TV and I get no sound. I don't care about auto switch for sound, that would be great but not necessary. I just want my sound to work through the HDMI. What I have tried: Changed GRUB_CMDLINE_LINUX_DEFAULT="quiet splash" to GRUB_CMDLINE_LINUX_DEFAULT="quiet splash radeon.audio=1" pact set-card-profile 0 output:hdmi-surround Failure: no such entity Sound Settings: Right-click Sound indicator ? Sound Settings ? Output Tab, and set Digital Output (S/PDIF) Built in Audio Speakers Built in Audio I only get 2 settings. If I right-click the area below those 2 in the "play sound through" box, I get no "show hidden devices". I am also doing all this with the HDMI connected to eliminate any possibility for error.

  Read the article

• Crackling sound from microphone recently, in 13.04

  - by Patrig Droumaguet

  I use 13.04 since the release and I use Skype which was working well. But recently I've had remarks saying my voice was "crackling", even if the voice from my interlocutor was perfect. Making a test with Audacity and Cheese, I've seen that every recorded sound (with the front microphone of my laptop or a jack microphone) was crackling. It's not really like saturating, the sound has a lot of annoying pops. I've tried to check the settings, they were still on PulseAudio. I've even tried the extreme solution : re-installing Ubuntu (because initially it was working)… with the same problem. If I boot on Windows (dual-boot) I have no problem (so it's not physical). If anyone could help :) My laptop is a HP dv6-6165sf. The sound card is a "IDT 92HD81B1X5" (with BeatsAudio). Thanks a lot ! New tests - july 6th Hi again, I've tried editing /etc/pulse/default.pa with these three settings : load-module module-udev-detect use_ucm=0 tsched=0 load-module module-udev-detect tsched=0 load-module module-udev-detect use_ucm=0 The three of them don't change anything, except the last one (which was by default) which makes Audacity record without any crackling sound. But in Skype, Cheese and Kazam, the sound is crackling… I've installed again Ubuntu 13.04 (from scratch, deleting everything from /home), and I've updated it. The microphone is still cracking. Thanks for your help !

  Read the article

• 13.04 Temp Save, rt3290, Kernel downgrade

  - by user170534

  It's kind of a multiplying but I didn't wanted to open more than one topics. I'd have a fresh install of Ubuntu with tlp configured and using acpi_call to keep 7670M turned off. I was a short time arch user and with openbox and firefox it was about 60 to 70 degrees; wanted to turn to a stable release just for this reason. acpitz-virtual-0 Adapter: Virtual device temp1: +50.0°C radeon-pci-0100 Adapter: PCI adapter temp1: -128.0°C coretemp-isa-0000 Adapter: ISA adapter Physical id 0: +56.0°C (high = +87.0°C, crit = +105.0°C) Core 0: +54.0°C (high = +87.0°C, crit = +105.0°C) Core 1: +55.0°C (high = +87.0°C, crit = +105.0°C) The temperature is not seriously high yet can be lower. Another issue is my wifi card, rt3290: The rt2800pci module is fine and all that but the download performance is pretty bad alongside of annoying signal range and the prop. driver gives a conf error about some specific rt2860 code and integrales in pci_dev file. If I blank off the error making variables, module loads but the driver is unused. Since the driver is old, I was thinking of downgrading the kernel of raring to 3.7 or may be 3.6. Should &-or can I?

  Read the article

• xubutnu Nvidia Settings not remembered

  - by hozza

  I have an Nvidia card and I'm using NVIDIA Driver Version: 304.51 and the NVIDIA X Server Settings GUI. Everything works fine but when I reboot and login again both my two screens are set to +0 +0 so they mirror each other... I change the settings to screen 2 (NEC LED) to be left of screen 1 (DELL) click Apply and Save to X Configuration File... It all works but when I login again the settings are not remembered... This is my xorg config file, can anyone help out? # nvidia-settings: X configuration file generated by nvidia-settings # nvidia-settings: version 304.51 (buildd@komainu) Fri Oct 12 12:53:49 UTC 2012 Section "ServerLayout" Identifier "Layout0" Screen 0 "Screen0" 0 0 InputDevice "Keyboard0" "CoreKeyboard" InputDevice "Mouse0" "CorePointer" Option "Xinerama" "0" EndSection Section "Files" EndSection Section "InputDevice" # generated from default Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/psaux" Option "Emulate3Buttons" "no" Option "ZAxisMapping" "4 5" EndSection Section "InputDevice" # generated from default Identifier "Keyboard0" Driver "kbd" EndSection Section "Monitor" # HorizSync source: edid, VertRefresh source: edid Identifier "Monitor0" VendorName "Unknown" ModelName "DELL 2005FPW" HorizSync 30.0 - 83.0 VertRefresh 56.0 - 75.0 Option "DPMS" EndSection Section "Device" Identifier "Device0" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "GeForce GT 640" EndSection Section "Screen" Identifier "Screen0" Device "Device0" Monitor "Monitor0" DefaultDepth 24 Option "Stereo" "0" Option "nvidiaXineramaInfoOrder" "DFP-0" Option "metamodes" "DFP-0: nvidia-auto-select +1280+0, DFP-2: nvidia-auto-select +0+0" SubSection "Display" Depth 24 EndSubSection EndSection

  Read the article

• Enabling GTX 570

  - by Silas

  Hello i just built up my new system: Asus Rock Z77 Extreme 4 Intel i7 3770k 16 Gb Corsair Ram Zotac Nvidia GTX 570 bequiet! 630W Power supply 120 GB SSD So after i installed UBUNTU 12.04 64 bit. It ran smoothly. I downloaded and installed all the recommended updates. After checking the Sytem details the GTX 570 didnt show up as graphics unit. so i figured i needed to download the drivers. So i did but being a complete newbie to linux i didnt succeed in installing them. (I think) Anyway after several tries and errors i shut down the PC and restarted it. Resultung in do Signal to my screen after trying to reboot and all the monitor outs with no result i took out the graphic card and now it boots normally but after booting it says there is a problem with the system the graphics cant be recognized something something. So Question A: What do i do? I Like linux but the arbitrarity of the Errors that occur without any changes to the system scare me. Question B: Is there A beginners guide to Ubuntu where i could start from scratch because i really want this to work? Question C: Now that the System is (suddently) showing these graphic errors So far without visible consequence despite the error message. should i reinstall the GPU and give the driver installation another try or the other way around? Ill be very grateful for any help. Thank you in advance!

  Read the article

• Wifi interface changes name seemingly at random

  - by ray_voelker

  I'm currently having some issues getting a wireless interface to work continuously under an install of Ubuntu 12.04.1 LTS. Some of the issues I'm experiencing include Connection will drop out after some time after it has initially worked. Interface will be a different name after a reboot. For example, wlan0 will become wlan4 when using the ifconfig -a command. Ubuntu will take a long time to boot, looking for network adapters. The purpose of this build is to function as a web kiosk in a library. The computer is supposed to boot up into a web browser, and allow for browsing of the catalog. For some reason this interface does not appear to be working as it should. Are there any explanations for some of these problems I'm having, and perhaps some solutions? The wireless card appears as this after doing an lspci ... Ralink corp. RT2561/RT61 802.11g PCI In the /etc/network/interfaces file I have the following configuration for the interface. auto wlan0 iface wlan0 inet dhcp wireless-essid UDwireless wireless-mode Managed Thanks in advance for help on this.

  Read the article

• Audio not working in 12.10

  - by frampy

  I did a clean install of 12.10, when I open Sound Settings in gnome the only device in the list is "Dummy Output", and sound is not working. Sound worked fine out of the box in 12.04 I ran alsamixer, it says my card is "HDA Intel", and chip is "Realtek ALC880". The alsamixer playback output was set to mute at first, unmuting did not fix. I checked out the info at http://www.unixmen.com/2012003-howto-resolve-nosound-problem-on-ubuntu/ as suggested on a similar question, I've done everything there except installing the ubuntu audio dev team driver. Should I try install this? Edit: I've been reading the sound troubleshooting guide at https://help.ubuntu.com/community/SoundTroubleshooting It looks like Ubuntu is finding my audio device correctly. mike@wucade:~$ lspci -v | grep -A7 -i "audio" 00:1b.0 Audio device: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) High Definition Audio Controller (rev 03) Subsystem: Albatron Corp. Device 2668 Flags: bus master, fast devsel, latency 0, IRQ 40 Memory at d01c0000 (64-bit, non-prefetchable) [size=16K] Capabilities: Kernel driver in use: snd_hda_intel Kernel modules: snd-hda-intel Still stuck as to why this isn't working.

  Read the article

• Nvidia drivers with GeForce 680M problem [closed]

  - by biofermin

  Possible Duplicate: There's an issue with an Alpha/Beta Release of Ubuntu, what should I do? I have a new Alienware M17x which I have installed 64-bit Ubuntu 12.10 (dual boot). I have tried various ways to install the Nvidia drivers for the GeForce GTX 680M (which they claim they are compatible with): from Ubuntu Software Centre (though Additional Drivers fails to detect the card.) using sudo apt-get install nvidia-current downloading the drivers from nvidia and manually installing them (ctrl + alt + F6, sudo service lightdm stop, sudo ./NVIDIA*, sudo reboot) (each with a clean install of Ubuntu) but in all cases, when I reboot after installing nvidia-setings claims that I am not using the driver and should sudo nvidia-xconfig from the terminal, which I do but this has no effect and I am stuck in crappy resolution until I rm /etc/X11/xorg.conf and reboot. The xorg.conf that nvidia-xconfig generates is: Section "ServerLayout" Identifier "Layout0" Screen 0 "Screen0" InputDevice "Keyboard0" "CoreKeyboard" InputDevice "Mouse0" "CorePointer" EndSection Section "Files" EndSection Section "InputDevice" # generated from default Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/psaux" Option "Emulate3Buttons" "no" Option "ZAxisMapping" "4 5" EndSection Section "InputDevice" # generated from default Identifier "Keyboard0" Driver "kbd" EndSection Section "Monitor" Identifier "Monitor0" VendorName "Unknown" ModelName "Unknown" HorizSync 28.0 - 33.0 VertRefresh 43.0 - 72.0 Option "DPMS" EndSection Section "Device" Identifier "Device0" Driver "nvidia" VendorName "NVIDIA Corporation" EndSection Section "Screen" Identifier "Screen0" Device "Device0" Monitor "Monitor0" DefaultDepth 24 SubSection "Display" Depth 24 EndSubSection EndSection

  Read the article

• PARTNER News: Tips and Guidelines from Avago (formerly LSI)

  - by Zeynep Koch

  In this blog write-up we would like to focus our attention to one of our IHV partners, Avago (formerly LSI) . Avago and Oracle have been collaborating at many levels for many years.  At the lowest level, Avago and Oracle engineer solutions to inbox advanced features in our I/O device drivers.  We collaborate to test, verify and optimize these drivers in Oracle Linux with Unbreakable Enterprise Kernel. Both LSI Nytro and Sun F-Series PCIe flash devices are supported inbox in Oracle Linux with Unbreakable Enterprise Kernel. By collaborating early in the engineering design cycle we can find and resolve issues sooner and deliver to the end-customer a fully optimized platform for I/O efficiency and data protection.  Hear more about the partnership and benefits in this podcast  LSI and Oracle Partnership. Avago had also been working on technical whitepaper and video whiteboard to explain some of the optimizations you can achieve by using smart flash cache with Oracle Linux.  Technical Paper: Improve Database Performance Using Sun Flash Accelerator Card, Database Smart Flash Cache and Oracle Linux Video: Improving DB Performance with Database Smart Flash Cache If you want more information about the partnership and product benefits, you can visit the LSI Oracle alliance page. 

  Read the article

• Less graphics power all the sudden (Intel HD 3000)

  - by queueoverflow

  I have a Intel Sandy Bridge i5 with the HD 3000 graphics card. I used to be able to play Urban Terror and Nexuiz comfortably with 85 and 60 frames per seconds until mid/end of October 2012, the former even on a full HD display with that many frames. Now I have around 30 to 45 on the smaller laptop screen and around 20 to 30 on the external monitor. Did something happen to Kubuntu 12.04 so that it has less graphics performance than previously? Update I looked into the system monitor and could not detect anything being at the maximum. The four CPU cores were pretty much bored, the 8 GB RAM were filled with maybe 2 GB. And I ran intel_cpu_top and did not notice anything at its limit. See the output. after Kernel bisecting I now did a kernel bisect and tried 3.2.0-23, 3.2.0-27, 3.2.0-29 and 3.2.0-30 and all had full graphics power. Interestingly, I then had full power when I just booted back into the regular 3.2.0-32 kernel. This does not make sense to me …

  Read the article

• OpenGL : sluggish performance in extracting texture from GPU

  - by Cyan

  I'm currently working on an algorithm which creates a texture within a render buffer. The operations are pretty complex, but for the GPU this is a simple task, done very quickly. The problem is that, after creating the texture, i would like to save it. This requires to extract it from GPU memory. For this operation, i'm using glGetTexImage(). It works, but the performance is sluggish. No, i mean even slower than that. For example, an 8MB texture (uncompressed) requires 3 seconds (yes, seconds) to be extracted. That's mind puzzling. I'm almost wondering if my graphic card is connected by a serial link... Well, anyway, i've looked around, and found some people complaining about the same, but no working solution so far. The most promising advise was to "extract data in the native format of the GPU". Which i've tried and tried, but failed so far. Edit : by moving the call to glGetTexImage() in a different place, the speed has been a bit improved for the most dramatic samples : looking again at the 8MB texture, it knows requires 500ms, instead of 3sec. It's better, but still much too slow. Smaller texture sizes were not affected by the change (typical timing remained into the 60-80ms range). Using glFinish() didn't help either. Note that, if i call glFinish() (without glGetTexImage), i'm getting a fixed 16ms result, whatever the texture size or complexity. It really looks like the timing for a frame at 60fps. The timing is measured for the full rendering + saving sequence. The call to glGetTexImage() alone does not really matter. That being said, it is this call which changes the performance. And yes, of course, as stated at the beginning, the texture is "created into the GPU", hence the need to save it.

  Read the article

• New Workstation &ndash; Lenovo W530 Core i7 32GB 256GB SSD Win8Pro

  - by Brian Lanham

  So I pretty-much have my new machine up and running full-time. I am still going to have to hit my old workstation for some things but am more-or-less working on my new machine.  It’s really fast. And Bret was right, I’m not so far using all the RAM. 16 would have been enough but as @CodeMonkeyJava “go big or go home”. Windows 8 is…interesting.  So far I still seem to do most of my work in the “Desktop”.  However, I like the Store concept and I like the Metro UX.  Live tiles are also nice.  I really like how I can switch between Desktop and Metro easily.  Overall I think Microsoft has done a great job of combining the needed experience for touch and mouse. My overall Windows 8 rating is 5.9 because of the video card. Otherwise I’m hitting 7.8.  The system boots from cold in about 11 seconds and performs complete shutdown in 4.7 seconds.  It wakes from sleep in less than 1 second. VS 2012 starts and restarts almost instantly.  In fact, I find myself staring at the start page without realizing it.  Build time doesn’t seem to be significantly increased but it is faster. I seem to already be reinvigorated for work with this new machine. I’m looking forward to the performance.

  Read the article

• What to do about "system running in low-graphics mode"?

  - by ubuntubabe

  My Dell which was 5 years old suddenly karked it and I had the "low graphics" black screen and useless dialogue box. As I believed it was a dead graphics card I went out and bought a brand new machine. I put aside the new machine and tried again in vain to open the Dell. I eventually got to the command line via Ctrl+Alt+F1. I logged into my account from there, and simply started a series of sudo apt-get remove of various softwares that I knew were installed on my PC (software without any great consequence like Google earth, tweak, Skype etc). Lo and behold after a sudo reboot my computer was fine again! So now I have 2 computers. BUT one week after buying the other one and installing 12.04 because I love Ubuntu, the SAME PROBLEM arrived! I once again deleted Google earth, Skype, and did a sudo reboot and everything worked as before. I think there is a bug or something in 12.04 as this problem has never arisen with any other versions of Ubuntu.

  Read the article

• How to fix Sketchup in Wine when tool starts, but displays empty workspace?

  - by Chaos_99

  I've installed wine 1.6 and winetricks in an Linux Mint 15 system, then downloaded the latest Sketchup2013 'Make' Windows-Installer and installed through wine. I've prepared the wine environment with starting as WINEARCH=win32, installed corefonts and ie8 and enabled the override for the 'riched20' libraries. (I've no idea what the last bit does, but it was advised in some guides.) I've also tried without these steps. Only the win32 seems to make a difference, as the installer will complain about not finding SP2 otherwise. Sketchup is installed successfully and starts, but displays an empty viewport. The program is responsive and everything works, it's just that you can't see anything. I don't get any OpenGL error and the registry entries seem fine, according to the OpenGL issue workarounds floating around the net. I still think it has something to do with OpenGL not working properly, maybe not in the wine environment, but in the linux system? I'm running on a Lenovo W520 with Nvida/Intel hybrid cards, but only the NVida card is active and the properitary nvidia (319) drivers are installed. GLXGears runs fine, but clamps at 2x the refresh rate. glxinfo outputs direct rendering: Yes server glx vendor string: NVIDIA Corporation server glx version string: 1.4 I'm willing to try any linux or wine OpenGL tests to narrow down the problem, if you can offer any advise on what to use.

  Read the article

• Ubuntu 12.04 dual monitor reset bug

  - by Tentresh

  My two displays are: Intel GMA x4500 Laptop (1280x800 native resolution of the built-in display) External display (1920x1080) Few minutes after I login to my dual monitor setup its get reset to mirror screens. If I restore the settings via displays application everything is fine. On each reset the following messages are written into /var/log/Xorg.0.log: [ 60.852] (II) PM Event received: Capability Changed [ 60.852] I830PMEvent: Capability change [ 132.920] (II) intel(0): EDID vendor "SEC", prod id 12869 [ 132.920] (II) intel(0): Printing DDC gathered Modelines: [ 132.920] (II) intel(0): Modeline "1280x800"x0.0 68.94 1280 1296 1344 1408 800 801 804 816 -hsync -vsync (49.0 kHz) [ 134.228] (II) intel(0): Allocated new frame buffer 1280x800 stride 5120, tiled Whereas right on startup or manual resolution reset /var/log/Xorg.0.log reports the expected frame buffer allocation: [ 1562.382] (II) intel(0): EDID vendor "SEC", prod id 12869 [ 1562.382] (II) intel(0): Printing DDC gathered Modelines: [ 1562.382] (II) intel(0): Modeline "1280x800"x0.0 68.94 1280 1296 1344 1408 800 801 804 816 -hsync -vsync (49.0 kHz) [ 1576.740] (II) intel(0): Allocated new frame buffer 3200x1080 stride 12800, tiled Is Ubuntu 12.04 not compatible with my video card? Can this be solved within Ubuntu? I like it's interface, but manually fiddling with resolution on every login is not bearable.

  Read the article

• Unable to start after 13.04 > 13.10 udate

  - by romainl

  At the end of the update process, clicking on the Restart button had no visible effect whatsoever. After waiting 5 to 10 minutes, I decided to reboot the computer manually. Since then, I rebooted a good dozen times (not with the hope that it would work but with the hope of reading the messages) with the same non-result and the same symptoms: I get the ASCII text-on-purple Ubuntu 13.10 . . . . splash screen with these messages: * Restoring resolver state... [OK] * Starting crash report submission daemon [OK] * Starting CUPS printing spooler/server [OK] Everything disappears. The whole process hangs at a purple screen with the mouse cursor right in the middle. At this point, I'm unable to use the mouse and the keyboard. Booting from a 12.04 CD works perfectly, Disk Utility says that all my disks are OK and I can mount my main partition without problems. Something obviously went wrong at the end of the upgrade but I have no idea what. I'd appreciate any pointer. This is the kind of moment where you really think "Next time, I'll separate my /home partition for sure". My machine is an aging but working Dell Inspiron 530 with an Intel Core Duo E2160 processor, 2 GHz of RAM and an ATI Radeon HD3650 video card. Thanks.

  Read the article

• Ubuntu 12.04 Full Screen without Unity Hub

  - by Xatolos

  I couldn't find an answer for this, so I thought I would try here. My problem is, I have some games on Wine that play in full screen mode but I can't really get them in full screen mode. When they start up, they end up with the GUI's "HUD" overlapping the game which is really annoying and well kills the option to play the game. This has also happened in a few of my Linux programs as well. While I wrote its a problem with Unity, it really isn't limited to this though. I've done full screen mode on Unity and had the Unity side bar and top menu overlap, I've used Gnome and had the same issue happen, Gnome menu is in the top, Cinnamon had the same issue. Sometimes if I Alt-Tab out of it and back into the program it MIGHT remove the HUD but that doesn't always work, and lets face it, full screen mode that is killed by the GUI just isn't something that can really be ignored. Any suggestions or help would be highly welcomed. My laptop http://www.cnet.com/laptops/asus-g53jw-a1-15/4507-3121_7-34210244.html edit Seems so far to be an issue with Unity and Gnome being in 3D mode, and possibly an issue with my NVidia card and XServe (I think that was it...). Going to Unity/Gnome 2d modes seem to help with this for the moment...

  Read the article

• Where to find information about ubuntu compatible or certified hardware/PC models

  - by Halkinn

  I am buying a new desktop PC in early 2013, anyway this question should apply to someone intending to buy a new laptop/ultrabook as well. This machine is not meant for gaming, and if I ocasionally do it, I can survive with minimum graphics. However I may need some heavy multimedia edition or multitasking at times, so basically my greatest priority is a good processor, after that perhaps average graphic card (if onboards are not enough, I am still not informed enough about that), at least 4GB of RAM with possibility of expansion. I know there are some PC models specially designed to ship with Ubuntu, which is the OS I use the most these days. However, most people around me use Windows and some software with unsupported versions for Linux and not having a Windows license becomes a bit problematic. Given that, I would like to find information about which PC models or even manufacters currently on the market have the best compatibility with Ubuntu, I am still undecided between building my own desktop or buying a pre-made model, so I would like to find information both for certified models and certified hardware or even Ubuntu partners that may work closely with Canonical. Where to find this information in order to make sure that I will have a good experience with Ubuntu on my new PC in the years to come?

  Read the article

• What is the best way to manage large 3d worlds (i.e minecraft style)?

  - by SomeXnaChump

  After playing minecraft I was marvelling a bit at their large worlds but at the same time finding it extremely slow to navigate, even with a quad core and meaty graphics card. Now I assume its fairly slow because: A) Its written in Java, and as most of the actual spatial partitioning and other memory management activities happen in there it would be slower than a native C++ version. B) They are not partitioning their world very well I could be wrong on both assumptions, however it got me thinking about the best way to manage large worlds. As it is more of a true 3d world, where a block can exist in any part of the world, it is basically a big 3d array [x][y][z], where each block in the world has a type (i.e BlockType.Empty = 0, BlockType.Dirt = 1 etc). Now I am assuming to make this sort of world performant you would need to: a) Use a tree of some variety (oct/kd/bsp) to split all the cubes out, it seems like an oct/kd would be the better option as you can just partition on a per cube level not a per triangle level. b) Use some algorithm to work out if the blocks within the scene can currently be seen, as blocks closer to the user could obfuscate the blocks behind, making it pointless to render them. c) Keep the block object themselves lightweight, so it is quick to add and remove them from the trees I guess there is no right answer to this, but I would be interested to see peoples opinions on the subject.

  Read the article

• Ubuntu 13.04 can only work in recovery mode

  - by zhangyangyu

  I have just updated my 12.10 to 13.04. Everything is updated. But I can only boot to a black screen. I mean after the GRUB interface and purple screen. And I can hear the voice of the password interface. But it is only the black screen. It all works OK in 12.10. But it can work in the recovery mode. I mean go into the recovery mode and choose resume. And then everything is OK. But when loading kernel, the screen is dirty. I don't know why and I have Googled a lot. But no resolutions works. My graphics card is Intel GMA HD 4000, tested as VESA: Intel® Sandybridge/Ivybridge Graphics. I have been trapped in this for a whole day. I do need help. Hope someone can help me. By the way, the kernel is 3.8.0-19 if it helps.

  Read the article

• NetworkManager detects no networks with a RTL8188CE

  - by Cormac O'Brien

  I'm on a 2011 Lenovo Thinkpad T420i with a Realtek RTL8188CE WiFi adapter. Here's the scenario: I pop in the Ubuntu LiveCD to install. Laptop detects all networks in range, I connect to my home network, internet working great. Once Ubuntu finishes installing, the home network I am connected to is the only one which appears in the applet list. Upon restarting or waking from suspend, NetworkManager does not detect any networks – it simply displays "Disconnected" under the Wireless Network section of the menu. I am able to connect to my home network by using the "Connect to Hidden Wireless Network" option and it works immediately. I have yet to test if this works with other SSIDs. I have tried reinstalling the entire OS as well as NetworkManager and my wireless drivers. For hardware info, I ran: cormac@cormac-T420:~$ sudo lshw -c network Here is the output for my wireless card: *-network description: Wireless interface product: RTL8188CE 802.11b/g/n WiFi Adapter vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:03:00.0 logical name: wlan0 version: 01 serial: d0:df:9a:08:73:50 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=rtl8192ce driverversion=3.2.0-26-generic firmware=N/A ip=192.168.1.138 latency=0 link=yes multicast=yes wireless=IEEE 802.11bgn resources: irq:17 ioport:5000(size=256) memory:f2500000-f2503fff I can provide more information if required. This was not a problem in Natty or Oneiric. I hope this can be fixed, I don't want to have to ask for an SSID wherever I need to connect.

  Read the article

• How can I speed up boot on one of my machines?

  - by Korneel Bouman

  I have a Gateway all in one machine (2 gig Intel Core 2 Duo T7250 dual core processor, 2 gig RAM - full specs) on which I installed 10.10. Once it has booted it's fine, but it takes forever to boot. This is what happens: 1. Boot starts with cursor flashing for about 10-15 seconds 2. Cursor disappears for 1.5 - 2 minutes 3. Cursor reappears, blinks a few seconds more, boot finishes in another 10 seconds 4. Login screen I have another machine with marginal better specs that boots up in no time (basically the above minus the two minute delay). Things I've done: enabled verbose mode for grub nothing is showing until after 2 minute pause. checked syslog last message before pause is a message from alsa saying the process is already running (or something similar... going from memory here...) It could be something sound related as the built in speakers are not working (sound card is recognized though and headphones work). Anyway, it's not the end of the world, but it's annoying and I'd like to know what's going on... Many thanks, and let me know if more info is needed.

  Read the article

< Previous Page | 197 198 199 200 201 202 203 204 205 206 207 208  | Next Page >