Search Results

Search found 7931 results on 318 pages for 'hardware rec'.

Page 202/318 | < Previous Page | 198 199 200 201 202 203 204 205 206 207 208 209  | Next Page >

• Stream music from Laptop to iPod Touch over Wi-Fi

  - by codeulike

  Rather than running a long cable from my Laptop to my stereo, I've been thinking for a while about getting one of those wireless devices that lets you transmit audio from your PC to a receiver plugged into the stereo. Then I realised I already have hardware that can potentially do this - I have an iPod Touch, and a Wi-Fi network in the house. So, is there some iPod Touch App that will let the iPod act as a Wi-Fi music receiver? And presumably, a corresponding piece of broadcast software for my (Windows Vista) Laptop?

  Read the article

• Load-balance with LAN and Wifi

  - by Synox

  I have a Mac, which runs Mac OSX 10.6 or Ubuntu 9.10 or Windows XP (Multiboot). Solution can be for any of the systems, whatever works better. I have two ISPs, one can be accessed via Wifi, one can be accessed via LAN. In OSX i can define the priority, which network to choose first. But what i wish to do is to load-balance with both networks. I don't want to buy extra hardware. I have some unused wifi routers if this would help. Compiling and configuring programms in linux is no problem for me. Thanks for any help.

  Read the article

• Toshiba monitor not displaying anything

  - by MirroredFate

  Alright, so I agreed to fix a friends computer, thinking it was a software problem, not hardware. I was going to use an XP disc and valid code to swap her from Vista to XP, as apparently Vista had some driver issues. I found out, however, that the real problem was her heat sink was completely clogged, causing the computer to overheat and shut down. So, I took the computer apart and cleaned the heat sink. However, after putting it all back together, and turning it on, nothing at all shows up. I plugged in an external monitor, and nothing shows up on that either. I have double, triple, decuply checked all the connections and everything appears to be plugged in, attached, and in the right place. I am out of ideas. So, my question is, does anyone have any clue what is going on, and have suggestions I could try?

  Read the article

• Installing VMware ESXi 4.0 on Dell 1950: Cannot open vmkboot.gz

  - by rlandster

  I am trying to install VMware ESXi 4.0.0 U1 on a Dell 1950 server via a bootable CD-ROM. I keep getting this error right at the start: Cannot open vmkboot.gz I checked that the CD-ROM drive is not to blame by installing Debian Etch using that drive. I tried several different versions of ESXi (3.5, 3.5 Dell edition, 4.0 Dell edition) and they all give me an error at the same place. I also tried installing from a USB "thumb" drive but got the same error. I checked with the VMware HCL (Hardware Compatibility List) and the Dell 1950 is listed as being compatible. Here are some server details: Two 1.6 GHz Xeon 5110 CPUs (ID: 06-0F-B) BIOS version 2.2.6 Any ideas on what might be the issue?

  Read the article

• BSOD 0x000000f4(Probably caused by : wininit.exe)

  - by vacuum

  I have BSOD with 0x000000f4 code. It appears when system is not loaded at all. No new hardware where intalled. Only nvidia drivers where updated 3 days ago and they are up to date for now(version 296.10). System Health Report(perfmon /report) shows nothing interesting(only complained on disabled UAC) System is on SSD disk(WDC SSC-D0064SC-2100 B) Dump Spec: OS Name Microsoft Windows 7 Ultimate Version 6.1.7601 Service Pack 1 Build 7601 System Manufacturer Gigabyte Technology Co., Ltd. System Model P31-DS3L System Type x64-based PC Processor Intel(R) Core(TM)2 Duo CPU E7200 @ 2.53GHz, 2534 Mhz, 2 Core(s), 2 Logical Processor(s) BIOS Version/Date Award Software International, Inc. F9, 10.07.2008 Any suggestions?

  Read the article

• Automating and deploying new linux servers

  - by luckytaxi

  I'm in the process of developing a method to automate new virtual machines into my environment. 90% of our machines are virtual but the process is similar for both physical and vmware based images. What I do now is I use cobbler to install the base OS. The kickstart script has post hooks to modify the yum repo and installs puppet and func. Once the servers are running, I manually add them into nagios and sign the certificate via the puppetmaster. I've since migrated most of the resources to use mysql as the backend. I wanted to see what others are doing and my goal for 2011 is to have puppet inventory the hardware into mysql, and somehow i'll script a python script to have nagios grab the info and automatically add it for monitoring purposes. It's kind of tedious to have to add each new server into nagios, puppet's dashboard, munin, etc...

  Read the article

• MediaPortal crash when scanning my TV Channels

  - by Martin Ongtangco

  Hello, I tried installing MediaPortal (http://www.team-mediaportal.com) on my old system. I installed & tried both beta & stable releases: Here's the old system specs: Windows XP SP3; 512mb DDR; 80GB IDE; K-World PVR-TV7131 Analog TV-Tuner; Inno3d FX5500 128mb 64bit; When scanning through the TV-Server, it crashes. I don't know if the incompatibility comes from the hardware or the OS, but my TV Tuner's own Media center app works well. For now, that's what im using. Anyone here familiar with MediaPortal? Thanks!

  Read the article

• Recommended Configuration to setup Tomcat 7 on windows OS

  - by yashbinani

  I have created a small web application using java/jee which will be deployed in LAN environment. I want to know the recommended hardware configuration. Details are as follows 1) Expected number of hits: 20 hits / hour 2) Number of clients 5-7 3) Application Server : Tomcat 7 4) Database server : MySql App and DB shall be deployed on same machine 5) OS Configuration : Windows XP or any unix flavour ? Can a simple p4/celeron machine with 1 gb ram 8-10 GB hard disk will be sufficient to cater client requests? Server will not be storing too many files/images/videos Client does not want to spend too much on infrastructure.

  Read the article

• USB driver problems (Windows 8.1)

  - by HelloWorld

  Every time I turn on my laptop the USB ports don't work and the drivers have an error. In order to fix this I'm forced to start the Device Manager, uninstall all the USB drivers, open the Control Panel, click Find and fix problems (under System and Security), click Configure a device (under Hardware and Sound) and then when that window pops up just hit Next until I can see my USB drivers reinstalled and working in the Device Manager window under Universal Serial Bus controllers. I found this way to fix it but I would like a permanent solution so that I don't have to do this every time I turn on the machine. Any ideas? When I bought the machine it had Window 7 installed but I later upgraded it to Windows 8.0 and then 8.1 after that.

  Read the article

• windows seven disk check error

  - by crazybmanp

  i have gotten the error in the microsoft KB article 975778 (http://support.microsoft.com/kb/975778/en-us) i was able to get onto my computer luckily, but when i went on to get the hotfix that is stated in the article, it gave me this error when i ran it: "the update is not applicable to your computer." is there any way of getting the disk check error to stop, or to get this fix to work. i will answer any questions on hardware if you post the questions in the comments. answers to questions this is the a full version that i got from ASUS as an upgrade disk from windows vista (hopefully more specific than you were asking)

  Read the article

• Latitude E6410 - Screen flickering on Windows 8

  - by Martin

  On Windows 8, my Latitude E6410 screen (1440x900 - 60Hz - NVidia NVS3100M) is flickering. If I turn off the laptop for 30 minutes and turn it back on, there's no flickering but it eventually start again after 10-15 minutes. The flickering seems more present at the top and bottom of the screen. I already updated the graphic card drivers, bios, etc. Nothing seems to fix the issue. To prove that it isn't a hardware issue, when I reinstalled Windows 7 I couldn't reproduce the issue. Any idea what could cause this?

  Read the article

• Going from dev to sysadmin advice [on hold]

  - by dotnetdev

  I've seen the threads on here about transitions to/from sysadmin. My story is I am a dev (technology is irrelevant), but in learning that technology it required a lot of server infrastructure. In the last few years, I thus had to setup a lot of infrastructure (AD, DNS, SQL etc) to learn said technology. I've noticed that I've enjoyed doing sysadmin and got quite good at it, and find it even engrossing (e.g. I am amazed by how decievingly complicated AD is, under the hood). I'm now thinking of moving into IT infrastructure after about 4 years in various dev (.NET) roles. Any advice? My concern is that I don't have any experience with hardware load balancers and firewalls like F5 etc, which some jobs require. How could I compensate for that? Also, I'm rubbish with my hands, would this be a factor? (i.e. maintaining physical kit)? Thanks

  Read the article

• Can I upgrade an Asus M51Sn laptop to 2x4GB of RAM? (DDR2)

  - by matteo

  My Asus M51Sn has 2 RAM slots which currently have 1x1GB + 1x2GB DDR2-800 SODimm RAM modules installed. I've found out that 4GB DDR2 SODimm modules do exist, though they are impossible to find in local stores nere here, but I've found them in online stores like these: http://www.pccomponentes.com/g_skill_ddr2_800_pc2_6400_4gb_so_dimm.html They seem to meet the specification, so can I replace both my current modules with 2x4GB modules, and reach a total of 8GB? Or should I worry about some limit (e.g. 4GB max or 2GB per slot) imposed by the matherboard, chipset or whatever? (I currently use Ubuntu 12.04 32 bit, so I plan to use the pae kernel, which supposedly supports 4GB ram on a 32bit system; or I may consider switching tu 64bit ubuntu; the question is about hardware limitations, not OS limitations).

  Read the article

• ATI / AMD HIS HD 7870 Graphics card fan speed below 16% / 20% 26%

  - by Thorsten Niehues

  I bought a AMD / ATI HIS HD 7870 to replace my old HD 4870. I noticed that the fan speed does not scale with the temperature: The fan speed does not get below 28% (read from catalyst / automatic fan speed) If I manually change it in the catalyst to 20% then it has the same speed than 28% : about 900-1000 rpm. With HIS iTurbo i manually can change the fan speed below 20%. But I noticed that changing the fan speed below 16% results in 3200 rpm. This is really stupid and annoying since my PC is a ultra silent PC and all fans are running with about 500 rpm when the PC is idle (windows / musik movies, etc.) Is there any way to change the fan speed to a reasonable speed like 500 rpm by software or hardware adapters (I really don't like to put a poti between the 12V line)

  Read the article

• Load-balance with LAN and Wi-Fi

  - by Synox

  I have a Mac, which runs Mac OS X 10.6 or Ubuntu 9.10 or Windows XP (Multiboot). Solution can be for any of the systems, whatever works better. I have two ISPs, one can be accessed via Wi-Fi, one can be accessed via LAN. In Mac OS X I can define the priority, which network to choose first. But what I wish to do is to load-balance with both networks. I don't want to buy extra hardware. I have some unused Wi-Fi routers if this would help. Compiling and configuring programms in Linux is no problem for me.

  Read the article

• Guaranteeing ACID properties for InnoDB databases.

  - by plinehan

  What steps must one take to ensure that an otherwise defaultly-configured InnoDB server is truly ACID compliant? The InnoDB configuration page mentions that the hardware itself must be configured to honor fsync calls, i.e. disable any write-back caches. This page mentions some other concerns, but may be conflating the binary log and the InnoDB log, and may be a bit out of date regarding default settings for MySQL 5.x. Upon reading the binary log document page it would seem that the "sync_binlog=1" setting is not required for ACID properties in general, only for ACID properties vis a vis point-in-time recovery and replication. So, is disabling write-back disk caching sufficient, or are there other settings that must be tweaked?

  Read the article

• Cheapest Embedded System with Wireless Connectivity?

  - by geeko

  Problem: I'm trying to capture some information coming from keyboard, mouse and barcode reader connected to some PC via PS/2, USB and/or RS-232, before information get to PC and send it over the Internet to some central server. I'm thinking to do so by using some kind of hardware interface (middleware, if you like) between PC and input devices. I thought this interface can be embedded PC, PDA or simply some mobile phone with wireless connectivity. PS/2 and RS-232 could be converted to USB using some USB convector/hub that connects to one of these interface systems. Then some special API programming take place to communicate between PC, input devices and wireless server, in the form of application running on the interface system. What's the cheapest solution that can achieve this? Or possibly any other solution?

  Read the article

• What could explain my partitions disappearing on a new SSD with Windows 7?

  - by charlesrandall

  So this morning, I had a fresh install of Windows 7 pro, on a new SSD (Patriot TorqX 128gb), which I just put in to a new Dell Studio XPS 9000. Everything was fine. I booted to windows, no problem. I go to work. 8 hours later, I come home, and I'm greeted by my boot screen complaining about no bootable devices. Windows repair from the Windows 7 pro disk says it can't fix the problem. It doesn't see any windows installs. I boot up GParted, and my SSD is completely unallocated. No space used, no partitions. Perhaps this is related to allowing windows 7 to create a utility partition when I installed? Only thing I can think of. Is there some kind of known hardware issue that can result in an SSD completely wiping itself?

  Read the article

• Installing Vista on a BSOD Windows 7 (ASAP)

  - by anonymous

  On a previous question i posted, i asked for help on fixing my windows vista box because it keeps going to blue screen. No one seems to have the answer, so now i want to install Windows 7. I want to know if i can install 7 without having to reformat my hard drive and having to lose all my files. I've already confirmed the hardware is working because i installed Ubuntu 9.10 on my external hard drive and it runs on my system fine. I tested the memory using vista's memory test and Ubuntu's memory test. here's the previous post: http://superuser.com/questions/125897/i-really-need-help-resolving-a-window-vista-bsod-blue-screen-crash-on-my-deskto

  Read the article

• Color Calibrate Dual Monitor XP SP2

  - by Laramie

  This topic has been touched on before but not really answered. I have a dual monitor system and the colors differ wildly. I currently live Buenos Aires where color correction hardware costs premium prices. I do some graphic design, but don't require a pro-level calibration. That said, I'd like my monitors to be set as close to "true color" as possible. I've located the useful and free Monitor Calibration Wizard, but it seems to adjust the entire system internally at startup. I could use the Microsoft Color Control Panel Applet to set a different ICC or ICM profile for each monitor, but the Monitor Calibration Wizard outputs its own format for profiles.

  Read the article

• Why would a terminal server be kicking users off after about 5 minutes?

  - by Matt

  I have a terminal server that was restored from an old 1U server to an IBM HS20 Blade running ESXi. The restore was using shadow protect hardware independent restore. All appeared to be functioning well but we're finding that users are being periodically kicked off after around 5 minutes or so. The interesting thing is it doesn't appear to be a simple disconnect but the whole session has gone like it was logged out. There is nothing significant in the event log, and certainly nothing from terminal services that is logged. I've also checked the client computers and from the client computers logged into our other terminal server and there wasn't any issues there. It doesn't appear to be network related. Any ideas?

  Read the article

• How can I easily identify all keyboard shortcuts (hotkeys) on OS X and current running Applications

  - by Michael Prescott

  By default, the function keys on my MacBook Pro control various hardware features and native operating system applications like the brightness of the LCD, Expose, or iTunes. I like these buttons and can use the fn button to take advantage of application Function keys when working with certain applications. Some service-type, background applications also have useful keyboard shortcuts. I tend to forget which keys are active at the moment and sometimes launch the wrong processes. Is there an application or operating system, native way of identifying all of the currently available keyboard shortcuts?

  Read the article

• Right Drag on Mac

  - by Mafuba

  How do you perform a right-click-drag operation on Mac hardware? I know you can right click, but there does not seem to be a right click drag gesture. In my specific case I am using a MacBook Pro, and I am in a Windows environment. The question is more than just theoretical. I ask because there is functionality that uses this gesture, at least in the Windows world. For example, right now I'm trying to do a copy and rename in the TortoiseSVN repository browser. I think there are things you can do with a right drag in graphical editors like Photoshop as well. In windows you get a context menu when you right drag files. For those familiar with the software, I know I can do it in other ways; I'm not looking for workarounds to specific problems.

  Read the article

• Exchange 2010 domainprep messing up mailbox permissions on existing Exchange 2003 server

  - by tearman

  So our environment is basically we have an Exchange 2003 server, and we're attempting to move to Exchange 2010 gradually, and move to new hardware while we're at it. So our first step was obviously to get Exchange 2010 installed on the new box. However, after running the domainprep steps listed in http://technet.microsoft.com/en-us/library/bb125224.aspx (including PrepareLegacyExchangePermissions) our mailbox permissions get messed up. Normally, we have an AD security group for Exchange Administrators that allows anyone in that group to view all folders inside any user's mailbox. However, now, this functionality is gone and our Exchange Admins can't access anyone's mailboxes. We'd like to get this functionality back if we could. Thanks

  Read the article

• Backup Linux Root Partition (Fedora 12)

  - by SomeNewbie

  I setup my partition scheme to have an extra partition the size of my / partion. I have a separate home directory partition. Essentially, I will be doing things that might make my OS unstable so I'd like to backup the OS state but without bothering my home directory. Can I just backup (maybe with dd?) my root partition to another partition on the HDD? I know to restore it I would have to boot up with a livecd or something and do the reverse procedure. I want this to be as simple and require the least amount of external hardware as possible.

  Read the article

< Previous Page | 198 199 200 201 202 203 204 205 206 207 208 209  | Next Page >