Search Results

Search found 5873 results on 235 pages for 'raster graphics'.

Page 202/235 | < Previous Page | 198 199 200 201 202 203 204 205 206 207 208 209  | Next Page >

  • Will HTML5 make Silverlight redundant?

    - by Laila
    One of the great features of Adobe AIR v2 that was launched this month was its support for some of the 2008 draft of HTML5. The HTML5 specification was started in 2004, but the full spec will probably not be approved by W3C until around 2022. One might have thought that it would take years yet from now to reach the point where any browsers were remotely HTML5-compliant, but enough of HTML5 is published and agreed to make a lot of it possible, and Safari and Adobe have got there thanks to Apple's open-source WebKit. The race for HTML 5 has been fuelled by the demand by Apple and Google for advanced graphics, typography, animations and transitions without having to rely on third party browser plug-ins such as Adobe Flash or Silverlight. There is good reason for this haste: Flash doesn't support touch-devices and has been slow in supporting hardware video decoders such as H.264. There is a strong requirement to do all that Flash can do in an open-standards way. Those with proprietary solutions remain sniffy. In AIR 2, Adobe pointedly disables the HTML5 and tags that allow basic playing of media content, saying that the specification is not final and there is still no standard for the supported formats, and adding that Safari implements a 'disjoint set' of codecs. Microsoft also has little interest in HTML 5 as it has so much invested in Silverlight. Google stands to gain by the Adobe AIR for Android as it will allow a lot of applications to be migrated easily to the platform, so sees Apple's war on Flash as a way of gaining market share. Why do we care? It is because HTML5/CSS3 provides facilities much far beyond HTML4, bring the reality of browser-based applications a lot closer. Probably most generally useful is the advanced typography: Safari and AIR already both support a way of reflowing text in a container across an arbitrary number of columns; Page-specific fonts can also be specified. Then there is 2D drawing, video, transitions, local storage, AJAX navigation and mutable DOM prototypes. HTML5 is likely to provide base functionality that is required but it is too early to be certain that it will render Flash, Silverlight or JavaFX obsolete. In the meantime, Adobe Air provides the best vehicle for developing HTML5/CSS3 applications without a twinge of worry about browser incompatibilities. Cheers, Laila

    Read the article

  • How can I attach a model to the bone of another model?

    - by kaykayman
    I am trying to attach one animated model to one of the bones of another animated model in an XNA game. I've found a few questions/forum posts/articles online which explain how to attach a weapon model to the bone of another model (which is analogous to what I'm trying to achieve), but they don't seem to work for me. So as an example: I want to attach Model A to a specific bone in Model B. Question 1. As I understand it, I need to calculate the transforms which are applied to the bone on Model B and apply these same transforms to every bone in Model A. Is this right? Question 2. This is my code for calculating the Transforms on a specific bone. private Matrix GetTransformPaths(ModelBone bone) { Matrix result = Matrix.Identity; while (bone != null) { result = result * bone.Transform; bone = bone.Parent; } return result; } The maths of Matrices is almost entirely lost on me, but my understanding is that the above will work its way up the bone structure to the root bone and my end result will be the transform of the original bone relative to the model. Is this right? Question 3. Assuming that this is correct I then expect that I should either apply this to each bone in Model A, or in my Draw() method: private void DrawModel(SceneModel model, GameTime gametime) { foreach (var component in model.Components) { Matrix[] transforms = new Matrix[component.Model.Bones.Count]; component.Model.CopyAbsoluteBoneTransformsTo(transforms); Matrix parenttransform = Matrix.Identity; if (!string.IsNullOrEmpty(component.ParentBone)) parenttransform = GetTransformPaths(model.GetBone(component.ParentBone)); component.Player.Update(gametime.ElapsedGameTime, true, Matrix.Identity); Matrix[] bones = component.Player.GetSkinTransforms(); foreach (SkinnedEffect effect in mesh.Effects) { effect.SetBoneTransforms(bones); effect.EnableDefaultLighting(); effect.World = transforms[mesh.ParentBone.Index] * Matrix.CreateRotationY(MathHelper.ToRadians(model.Angle)) * Matrix.CreateTranslation(model.Position) * parenttransform; effect.View = getView(); effect.Projection = getProjection(); effect.Alpha = model.Opacity; } } mesh.Draw(); } I feel as though I have tried every conceivable way of incorporating the parenttransform value into the draw method. The above is my most recent attempt. Is what I'm trying to do correct? And if so, is there a reason it doesn't work? The above Draw method seems to transpose the models x/z position - but even at these wrong positions, they do not account for the animation of Model B at all. Note: As will be evident from the code my "model" is comprised of a list of "components". It is these "components" that correspond to a single "Microsoft.Xna.Framework.Graphics.Model"

    Read the article

  • CodePlex Daily Summary for Sunday, November 28, 2010

    CodePlex Daily Summary for Sunday, November 28, 2010Popular ReleasesMDownloader: MDownloader-0.15.25.7002: Fixed updater Fixed FileServe Fixed LetItBitNotepad.NET: Notepad.NET 0.7 Preview 1: Whats New?* Optimized Code Generation: Which means it will run significantly faster. * Preview of Syntax Highlighting: Only VB.NET highlighting is supported, C# and Ruby will come in Preview 2. * Improved Editing Updates (when the line number, etc updates) to be more graceful. * Recent Documents works! * Images can be inserted but they're extremely large. Known Bugs* The Update Process hangs: This is a bug apparently spawning since 0.5. It will be fixed in Preview 2. Until then, perform a fr...Flickr Schedulr: Schedulr v2.2.3984: This is v2.2 of Flickr Schedulr, a Windows desktop application that automatically uploads pictures and videos to Flickr based on a schedule (e.g. to post a new picture every day at a certain time). What's new in this release? Videos are now supported as well. The application can now automatically add pictures to the queue when it starts up, from specific monitored folders. Sets and Groups can now be displayed as text only (without icons) to speed up the application. Fixed issue that ta...Cropper: 1.9.4: Mostly fixes for issues with a few feature requests. Fixed Issues 2730 & 3638 & 14467 11044 11447 11448 11449 14665 Implemented Features 6123 11581PFC: PFC for PB 11.5: This is just a migration from the 11.0 code. No changes have been made yet (and they are needed) for it to work properly with 11.5.PDF Rider: PDF Rider 0.5: This release does not add any new feature for pdf manipulation, but enables automatic updates checking, so it is reccomended to install it in order to stay updated with next releases. Prerequisites * Microsoft Windows Operating Systems (XP - Vista - 7) * Microsoft .NET Framework 3.5 runtime * A PDF rendering software (i.e. Adobe Reader) that can be opened inside Internet Explorer. Installation instructionsChoose one of the following methods: 1. Download and run the "pdfRider0...XamlQuery/WPF - The Write Less, Do More, WPF Library: XamlQuery-WPF v1.2 (Runtime, Source): This is the first release of popular XamlQuery library for WPF. XamlQuery has already gained recognition among Silverlight developers.Math.NET Numerics: Beta 1: First beta of Math.NET Numerics. Only contains the managed linear algebra provider. Beta 2 will include the native linear algebra providers along with better documentation and examples.Minecraft GPS: Minecraft GPS 1.1: 1.1 Release New Features Compass! New style. Set opacity on main window to allow overlay of Minecraft.Microsoft All-In-One Code Framework: Visual Studio 2010 Code Samples 2010-11-25: Code samples for Visual Studio 2010Wii Backup Fusion: Wii Backup Fusion 0.8.5 Beta: - WBFS repair (default) options fixed - Transfer to image fixed - Settings ui widget names fixed - Some little bug fixes You need to reset the settings! Delete WiiBaFu's config file or registry entries on windows: Linux: ~/.config/WiiBaFu/wiibafu.conf Windows: HKEY_CURRENT_USER\Software\WiiBaFu\wiibafu Mac OS X: ~/Library/Preferences/com.wiibafu.wiibafu.plist Caution: This is a BETA version! Errors, crashes and data loss not impossible! Use in test environments only, not on productive syste...Minemapper: Minemapper v0.1.3: Added process count and world size calculation progress to the status bar. Added View->'Status Bar' menu item to show/hide the status bar. Status bar is automatically shown when loading a world. Added a prompt, when loading a world, to use or clear cached images.Sexy Select: sexy select v0.4: Changes in v0.4 Added method : elements. This returns all the option elements that are currently added to the select list Added method : selectOption. This method accepts two values, the element to be modified and the selected state. (true/false)Deep Zoom for WPF: First Release: This first release of the Deep Zoom control has the same source code, binaries and demos as the CodeProject article (http://www.codeproject.com/KB/WPF/DeepZoom.aspx).BlogEngine.NET: BlogEngine.NET 2.0 RC: This is a Release Candidate version for BlogEngine.NET 2.0. The most current, stable version of BlogEngine.NET is version 1.6. Find out more about the BlogEngine.NET 2.0 RC here. If you want to extend or modify BlogEngine.NET, you should download the source code. To get started, be sure to check out our installation documentation and the installation screencast. If you are upgrading from a previous version, please take a look at the Upgrading to BlogEngine.NET 2.0 instructions. As this ...NodeXL: Network Overview, Discovery and Exploration for Excel: NodeXL Excel Template, version 1.0.1.156: The NodeXL Excel template displays a network graph using edge and vertex lists stored in an Excel 2007 or Excel 2010 workbook. What's NewThis release adds a feature for aggregating the overall metrics in a folder full of NodeXL workbooks, adds geographical coordinates to the Twitter import features, and fixes a memory-related bug. See the Complete NodeXL Release History for details. Please Note: There is a new option in the setup program to install for "Just Me" or "Everyone." Most people...VFPX: FoxBarcode v.0.11: FoxBarcode v.0.11 - Released 2010.11.22 FoxBarcode is a 100% Visual FoxPro class that provides a tool for generating images with different bar code symbologies to be used in VFP forms and reports, or exported to other applications. Its use and distribution is free for all Visual FoxPro Community. Whats is new? Added a third parameter to the BarcodeImage() method Fixed some minor bugs History FoxBarcode v.0.10 - Released 2010.11.19 - 85 Downloads Project page: FoxBarcodeDotNetAge -a lightweight Mvc jQuery CMS: DotNetAge 1.1.0.5: What is new in DotNetAge 1.1.0.5 ?Document Library features and template added. Resolve issues of templates Improving publishing service performance Opml support added. What is new in DotNetAge 1.1 ? D.N.A Core updatesImprove runtime performance , more stabilize. The DNA core objects model added. Personalization features added that allows users create the personal website, manage their resources, store personal data DynamicUIFixed the PageManager could not move page node bug. ...ASP.NET MVC Project Awesome (jQuery Ajax helpers): 1.3.1 and demos: A rich set of helpers (controls) that you can use to build highly responsive and interactive Ajax-enabled Web applications. These helpers include Autocomplete, AjaxDropdown, Lookup, Confirm Dialog, Popup Form and Pager tested on mozilla, safari, chrome, opera, ie 9b/8/7/6DotSpatial: DotSpatial 11-21-2010: This release introduces the following Fixed bugs related to dispose, which caused issues when reordering layers in the legend Fixed bugs related to assigning categories where NULL values are in the fields New fast-acting resize using a bitmap "prediction" of what the final resize content will look like. ImageData.ReadBlock, ImageData.WriteBlock These allow direct file access for reading or writing a rectangular window. Bitmaps are used for holding the values. Removed the need to stor...New ProjectsAC: Just a simple AC ProjectAvailability Manager Project (CMPE290): Availability Manager Project (CMPE290)BCLExtensions: BCLExtensions is an extension method library for .NET 3.5 or higher which offers various extension methods for classes in the .NET Base Class Library (BCL)Command Browser 2.0 for Visual Studio: The Command Browser is a visual studio add-in that Lets you browse, and execute Visual Studio commands on the fly. It’s very handy for people that don’t tend to use bindings on daily basis and simply wants to learn new commands out of interest.EDM And T4: Generate a WCF Service from your edmxEmperor of the Multiverse: Szoftverarchitekturak rocks :)KINECT CALL: Kinect CallMultiSafepay for nopCommerce: This is MultiSafepay shop plugin voor nopCommerce. The current version supported is nopCommerce 1.60.MyGadgebydeleted: MyGadgebydeletedNHashcash: NHashcash is a .NET implementation of the Hashcash mechanism for paying for e-mail with burnt CPU cycles.OhYeah!: WP7 Note Demo ApplicationOMax - Online Market and Exchange for Real Estate: OMax Project - Online Real Estate Management System OMax stands for Online Market and eXchange and is a Real Estate management system focusing on both individuals (brokers, agents) and organizations (real estate companies) looking for online property management solutions.Opus - Silverlight UI Framework: The opus framework provides a simple way for creating UIs for Silverlight by leveraging your current MVVM structure. Outliner, the edge detection utility: Outliner is a vectorizer of the edges in the raster pictures. The new edge detection algorithm is used. It is developed in Visual C++ 2010 Express Edition, using WinAPI and STL.SharpDropBox Client for .NET: SharpDropBox Client is a DropBox client for (at first) WP7. It caches files/directories in ISO storage, and also uses Sterling DB to metadata info so that it can easily do hash checks against DropBox making it download only when there are changes. It can also be used offline.SicunSimpleDiary: ???????(????)Silverlight Navigation With Caliburn.Micro: Bring the power of the Cabliurn.Micro MVVM framework to Siliverlight 4 navigation applications. This sample application for CM shows how it can be used to create MVVM friendly Navigation applications which formerly required a view-first approach. SilverTrace - a tracer and logger for Silverlight applications: SilverTrace - a tracer and logger for Silverlight applications.StackDeck: StackDeck is a StackOverflow analysis tool written in WPFSVNHelper -- a small clean tool for visual studio: A small tool that used to clean your bin direcotry and temporary directory for the whole solutions. I usually use it before commit soure to a SVN Server. System.Xml.Serialization: Expressions.Compiler is a lightweight xml serialization framework. It is an addition to the standart .NET XML serialization. It is designed to support out-of-the-box features: * interface-driven Xml serialization * class-driven Xml serialization * runtime serializationVoXign: - Proposer une formation introductive à la langue des signes, en e-Learning. - autonomie de gestion de l’emploi du temps, du rythme - apprentissage d’un lexique de « première nécessité » - introduction à la culture sourde et approche des spécificités linguistiques de la LSF Weyland: A .NET metaprogramming framework.

    Read the article

  • How do I connect Ubuntu to Sony Bravia LED TV via HDMI?

    - by VedVals
    My laptop connects to 46" Sony Bravia LED TV using HDMI cable in Windows without any problem. However, it just doesn't work with Ubuntu 12.04. It always says No Signal. Problem somewhat persists after upgrading to 13.04. Bravia detects my laptop as a connection now but I am unable to display anything. What drivers/applications should I install to connect via HDMI? Output of sudo lspci -nn : 00:00.0 Host bridge [0600]: Intel Corporation 2nd Generation Core Processor Family DRAM Controller [8086:0104] (rev 09) 00:01.0 PCI bridge [0604]: Intel Corporation Xeon E3-1200/2nd Generation Core Processor Family PCI Express Root Port [8086:0101] (rev 09) 00:02.0 VGA compatible controller [0300]: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller [8086:0116] (rev 09) 00:16.0 Communication controller [0780]: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 [8086:1c3a] (rev 04) 00:1a.0 USB controller [0c03]: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 [8086:1c2d] (rev 05) 00:1b.0 Audio device [0403]: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller [8086:1c20] (rev 05) 00:1c.0 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 [8086:1c10] (rev b5) 00:1c.1 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 2 [8086:1c12] (rev b5) 00:1c.3 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 4 [8086:1c16] (rev b5) 00:1c.4 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 5 [8086:1c18] (rev b5) 00:1c.5 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 6 [8086:1c1a] (rev b5) 00:1d.0 USB controller [0c03]: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 [8086:1c26] (rev 05) 00:1f.0 ISA bridge [0601]: Intel Corporation HM67 Express Chipset Family LPC Controller [8086:1c4b] (rev 05) 00:1f.2 SATA controller [0106]: Intel Corporation 6 Series/C200 Series Chipset Family 6 port SATA AHCI Controller [8086:1c03] (rev 05) 00:1f.3 SMBus [0c05]: Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller [8086:1c22] (rev 05) 01:00.0 VGA compatible controller [0300]: NVIDIA Corporation GF108M [GeForce GT 525M] [10de:0df5] (rev ff) 03:00.0 Network controller [0280]: Intel Corporation Centrino Wireless-N 1030 [Rainbow Peak] [8086:008a] (rev 34) 04:00.0 USB controller [0c03]: NEC Corporation uPD720200 USB 3.0 Host Controller [1033:0194] (rev 04) 06:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168 PCI Express Gigabit Ethernet controller [10ec:8168] (rev 06)

    Read the article

  • Vostro 3560 Wireless on Ubuntu 12.10

    - by ngille
    I have been using Ubuntu 12.04.1 LTS on a Dell Vostro 3560 for some time now. At first I had issues with the wireless but I was pointed to a driver from Ubuntu 11.xx for a Broadcom BCM43142 and that did work! however with the upgrade to 12.10 I find myself at a lost because the driver will not work anymore. When trying to reinstall it I get "Driver of bad quality" I still install it but it just wont work. I cant seem to find anything on this issue for 12.10 and didn't know if anyone had any advice or if someone could point me in the right direction on resources to write my own driver for it. As I know C/C++ but have never written a driver for a Linux machine before. Thanks for any help! To be more clear I installed Ubuntu 12.10 Desktop on my Dell Vostro 3560 laptop. When I log in, my wireless card isn't visible in the Network Manager popup menu, although the wired network shows up there. I installed the driver mentioned below and that did help me on 12.04 but is now broken due to "Poor quality" a sudo lspci -nn command brings up: 00:00.0 Host bridge [0600]: Intel Corporation 3rd Gen Core processor DRAM Controller [8086:0154] (rev 09) 00:02.0 VGA compatible controller [0300]: Intel Corporation 3rd Gen Core processor Graphics Controller [8086:0166] (rev 09) 00:14.0 USB controller [0c03]: Intel Corporation 7 Series/C210 Series Chipset Family USB xHCI Host Controller [8086:1e31] (rev 04) 00:16.0 Communication controller [0780]: Intel Corporation 7 Series/C210 Series Chipset Family MEI Controller #1 [8086:1e3a] (rev 04) 00:1a.0 USB controller [0c03]: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #2 [8086:1e2d] (rev 04) 00:1b.0 Audio device [0403]: Intel Corporation 7 Series/C210 Series Chipset Family High Definition Audio Controller [8086:1e20] (rev 04) 00:1c.0 PCI bridge [0604]: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 1 [8086:1e10] (rev c4) 00:1c.1 PCI bridge [0604]: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 2 [8086:1e12] (rev c4) 00:1c.2 PCI bridge [0604]: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 3 [8086:1e14] (rev c4) 00:1d.0 USB controller [0c03]: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #1 [8086:1e26] (rev 04) 00:1f.0 ISA bridge [0601]: Intel Corporation HM77 Express Chipset LPC Controller [8086:1e57] (rev 04) 00:1f.2 SATA controller [0106]: Intel Corporation 7 Series Chipset Family 6-port SATA Controller [AHCI mode] [8086:1e03] (rev 04) 00:1f.3 SMBus [0c05]: Intel Corporation 7 Series/C210 Series Chipset Family SMBus Controller [8086:1e22] (rev 04) 01:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 07) **02:00.0 Network controller [0280]: Broadcom Corporation BCM43142 802.11b/g/n [14e4:4365] (rev 01)**

    Read the article

  • Ubuntu 13.04 boot into black screen, even after installing nvidia drivers, fail at: "Starting Reload cups, upon starting avahi-daemon..."

    - by Elad92
    I got a new machine with i7 4770k and gefore gtx660. I installed windows and then installed Ubuntu 13.04. In the installation everything went well, after the installation I again boot from the USB and choose try ubuntu, and installed boot-repair because windows automatically boot with no option for ubuntu. After I repaired the boot, I restarted and got into grub, when I chose Ubuntu I got message saying I'm running on low graphics mode and when I pressed ok the screen turned off. I couldn't do anything so I restarted and after reading this post: My computer boots to a black screen, what options do I have to fix it? I got into recovery, selected dpkg and repaired packages. Then I rebooted, and tried to press 'e' and change quiet splash to no splash and nomodeset but unfortunately both of them didn't work, and not the screen didn't get turned off, but I just saw a blank screen. So I rebooted again, entered the recovery, and this time I went to the root shell, and tried to install nvidia drivers from this guide here: http://www.howopensource.com/2012/10/install-nvidia-geforce-driver-in-ubuntu-12-10-12-04-using-ppa/ I rebooted and got the same black screen again (the screen didn't go off, just saw a blank screen). In the grub I see that the kernel is 3.8.0-25. I also checked that the usb files are not corrupted using the check CD from the ubuntu installation screen. I'm really frustrated, I don't know what else can I do. (If someone also knows how can I connect to wifi using the root shell it will be very appreciated, because when I choose the 'enable networking' it again booting me to a black screen. Thanks Edit After digging more, I again boot with nomodeset and saw where is it failing, this is the lines I saw: * Starting Reload cups, upon starting avahi-daemon to make sure remote queues are populated [OK] * Starting Reload cups, upon starting avahi-daemon to make sure remote queues are populated [fail] I searched for it in google and this is the closest result I got: http://ubuntuforums.org/showthread.php?t=2144261 i didn't find any way to solve it in the internet, from what I understand this is a problem with 13.04. If someone knows how to fix it I will be very grateful. Thanks Edit 2 - 23.6.13 As Mitch suggested, I disabled the avahi-daemon, and when I boot in nomodeset I get the following error: What else can be the problem?

    Read the article

  • HDMI sound gone, can't figure out how to turn it back on

    - by Oli
    I have had an Acer Revo box as a media centre for a while. I recently installed Ubuntu Server (10.10) on it and polished it up with nodm (one of the most simple ways to launch an X session) and installed boxee. It's been working fine for over a month. It's just running ALSA. I've had problems with PulseAudio/Boxee/HDMI before so I wanted to keep it simple. And that worked. It pushed both PCM and digital (AAC and various Dolby codecs) over HDMI perfectly. But I restarted it the other day after mucking around with some nfs configuration and now there isn't any sound. The hardware is an ION chipset. Nvidia 9400M graphics with Nvidia MCP79/7A audio. One thing I have noticed is there doesn't appear to be any sign of a IEC958 device. A traditional fix in the past for fresh installs has been to load alsamixer, find the IEC device and toggle its mute but I can't. I'm certain this used to represent the HDMI output. It just doesn't seem to exist any more unless I run sudo alsa-utils restart while boxee is running, when I see it in an error message: * Shutting down ALSA... [ OK ] * Setting up ALSA... * warning: 'alsactl restore' failed with error message 'alsactl: set_control:1388: Cannot write control '2:0:0:IEC958 Playback Default:0' : Operation not permitted'... ...done. When nodm (and thus boxee) aren't running, I don't see this error but alsamixer still doesn't show the IEC channel. aplay -l gives: card 0: NVidia [HDA NVidia], device 0: ALC662 rev1 Analog [ALC662 rev1 Analog] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: NVidia [HDA NVidia], device 3: HDMI 0 [HDMI 0] Subdevices: 0/1 Subdevice #0: subdevice #0 Its section in lshw reads: *-multimedia description: Audio device product: MCP79 High Definition Audio vendor: nVidia Corporation physical id: 8 bus info: pci@0000:00:08.0 version: b1 width: 32 bits clock: 66MHz capabilities: pm bus_master cap_list configuration: driver=HDA Intel latency=0 maxlatency=5 mingnt=2 resources: irq:22 memory:fae78000-fae7bfff I was running on the stock PAE kernel but now it's running on 2.6.37.1. I upgraded to see if that fixed things; it didn't. I'm considering a reinstall but I hate doing that because a) there's a bit of custom configuration in getting X and Boxee to start on boot and b) I don't know what the problem is. If I reinstall this time, I'll end up doing that every time the sound breaks. I love Ubuntu but I don't want to install it once a month. Is there any way to forcibly reset all alsa settings and restart from scratch (without doing a reinstall)? Any other tips? If you need more information, just ask.

    Read the article

  • Why is my system freezing when I switch users

    - by ZeroDivide
    Hello I've recently upgraded from 13.04 to 13.10 64bit. I'm running AMD graphics with the proprietary drivers. I have two user accounts. Mine(administrator) and my girlfriend's(standard) My girlfriend clicks "switch user" from my lock screen and logs in fine. I then try to click "switch user" from her lock screen and everything goes black. Then the monitor blinks on and off with just a single cursor. I have no way to access the terminal, the system is unresponsive and I have to hit the power button. Even ctrl + alt + f4 or ctrl + alt + t doesn't get me a terminal. When I press the power button on my system, it does start printing out the shutdown sequence on the monitor. Here is my .xsession-errors Script for ibus started at run_im. Script for auto started at run_im. Script for default started at run_im. Here is hers: init: at-spi2-registryd main process ended, respawning init: at-spi2-registryd main process ended, respawning init: at-spi2-registryd main process ended, respawning init: at-spi2-registryd main process ended, respawning init: at-spi2-registryd main process ended, respawning init: at-spi2-registryd main process ended, respawning init: at-spi2-registryd main process ended, respawning init: at-spi2-registryd main process ended, respawning init: at-spi2-registryd main process ended, respawning init: at-spi2-registryd main process ended, respawning init: at-spi2-registryd respawning too fast, stopped init: logrotate main process (4726) killed by TERM signal init: upstart-dbus-session-bridge main process (4865) terminated with status 1 init: gnome-settings-daemon main process (4843) terminated with status 1 init: gnome-session main process (4852) terminated with status 1 init: unity-panel-service main process (4863) killed by KILL signal I found some advice in a forum to look for at-spi2-registryd in my system logs. Perhaps it will be useful. executing this: sudo grep -r at-spi2-registryd /var/log/* produces this: /var/log/lightdm/x-1-greeter.log:** (at-spi2-registryd:4384): WARNING **: Failed to register client: GDBus.Error:org.freedesktop.DBus.Error.ServiceUnknown: The name org.gnome.SessionManager was not provided by any .service files /var/log/lightdm/x-1-greeter.log:** (at-spi2-registryd:4384): WARNING **: Unable to register client with session manager /var/log/lightdm/x-2-greeter.log.old:** (at-spi2-registryd:7447): WARNING **: Failed to register client: GDBus.Error:org.freedesktop.DBus.Error.ServiceUnknown: The name org.gnome.SessionManager was not provided by any .service files /var/log/lightdm/x-2-greeter.log.old:** (at-spi2-registryd:7447): WARNING **: Unable to register client with session manager /var/log/lightdm/x-0-greeter.log:** (at-spi2-registryd:1378): WARNING **: Failed to register client: GDBus.Error:org.freedesktop.DBus.Error.ServiceUnknown: The name org.gnome.SessionManager was not provided by any .service files /var/log/lightdm/x-0-greeter.log:** (at-spi2-registryd:1378): WARNING **: Unable to register client with session manager /var/log/lightdm/x-0-greeter.log.old:** (at-spi2-registryd:1357): WARNING **: Failed to register client: GDBus.Error:org.freedesktop.DBus.Error.ServiceUnknown: The name org.gnome.SessionManager was not provided by any .service files /var/log/lightdm/x-0-greeter.log.old:** (at-spi2-registryd:1357): WARNING **: Unable to register client with session manager Any ideas what is going on?

    Read the article

  • How to export 3D models that consist of several parts (eg. turret on a tank)?

    - by Will
    What are the standard alternatives for the mechanics of attaching turrets and such to 3D models for use in-game? I don't mean the logic, but rather the graphics aspects. My naive approach is to extend the MD2-like format that I'm using (blender-exported using a script) to include a new set of properties for a mesh that: is anchored in another 'parent' mesh. The anchor is a point and normal in the parent mesh and a point and normal in the child mesh; these will always be colinear, giving the child rotation but not translation relative to the parent point. has a normal that is aligned with a 'target'. Classically this target is the enemy that is being engaged, but it might be some other vector e.g. 'the wind' (for sails and flags (and smoke, which is a particle system but the same principle applies)) or 'upwards' (e.g. so bodies of riders bend properly when riding a horse up an incline etc). that the anchor and target alignments have maximum and minimum and a speed coeff. there is game logic for multiple turrets and on a model and deciding which engages which enemy. 'primary' and 'secondary' or 'target0' ... 'targetN' or some such annotation will be there. So to illustrate, a classic tank would be made from three meshes; a main body mesh, a turret mesh that is anchored to the top of the main body so it can spin only horizontally and a barrel mesh that is anchored to the front of the turret and can only move vertically within some bounds. And there might be a forth flag mesh on top of the turret that is aligned with 'wind' where wind is a function the engine solves that merges environment's wind angle with angle the vehicle is travelling in an velocity, or something fancy. This gives each mesh one degree of freedom relative to its parent. Things with multiple degrees of freedom can be modelled by zero-vertex connecting meshes perhaps? This is where I think the approach I outlined begins to feel inelegant, yet perhaps its still a workable system? This is why I want to know how it is done in professional games ;) Are there better approaches? Are there formats that already include this information? Is this routine?

    Read the article

  • No suspend on lid closing on a Samsung Series 5 14" NP530U4BI

    - by dmeu
    Ok, i realize I am not the only one, but I will try to provide all info possible to make it exemplary as possible and narrow down the error sources. I have a fresh install of Ubuntu 12.04 and the suspend worked fine upon having it freshly installed but now it does not anymore. The suspend option from the system power button on the top right works fine. Things I did do which I don't know if they are related: Install and remove againthe FGLRX drivers (Radeon graphic card) Install Jupiter power managment (shutting it down is not changin anything) Plug in and out an external display The configuration I know of is well set: In System Settings/Power all is set to suspend when closing lid Double checked with dconf-editor, everything set to suspend So, from here on I don't know how to proceed.. what are common problems that cause this error? EDIT: My computer model is: Samsung Series 5 14" NP530U4BI $ sudo lspci -nn 00:00.0 Host bridge [0600]: Intel Corporation 2nd Generation Core Processor Family DRAM Controller 00:01.0 PCI bridge [0604]: Intel Corporation Xeon E3-1200/2nd Generation Core Processor Family PCI Express Root Port 00:02.0 VGA compatible controller [0300]: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller 00:16.0 Communication controller [0780]: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 00:1a.0 USB controller [0c03]: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 00:1b.0 Audio device [0403]: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller 00:1c.0 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 00:1c.3 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 4 00:1c.4 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 5 00:1d.0 USB controller [0c03]: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 00:1f.0 ISA bridge [0601]: Intel Corporation HM65 Express Chipset Family LPC Controller [8086:1c49] (rev 04) 00:1f.2 SATA controller [0106]: Intel Corporation 6 Series/C200 Series Chipset Family 6 port SATA AHCI Controller 00:1f.3 SMBus [0c05]: Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller [8086:1c22] (rev 04) 01:00.0 VGA compatible controller [0300]: Advanced Micro Devices [AMD] nee ATI Thames [Radeon 7500M/7600M Series] 02:00.0 Network controller [0280]: Intel Corporation Centrino Advanced-N 6230 03:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller 04:00.0 USB controller [0c03]: ASMedia Technology Inc. ASM1042 SuperSpeed USB Host Controller

    Read the article

  • Ubuntu hangs on booting up after a update

    - by alFReD NSH
    I've made a clean install yesterday, for the first time restarted, everything went good and then after I updated packages and copied my old home directory to replace the new one, when I restarted it hung when it was booting. I tried reinstalling again and doing the same thing, but again same thing happened. Here's what I see, before when the Ubuntu logo with the five dots is shown: Then after that, 3 or 4 of the dots will load and hangs there. If I press arrow up before that, this will be shown I started my laptop again today(the pictures are for the day before) and after that, boot up with live CD and got the logs. dmesg: http://pastebin.com/aVxV7BQF syslog: http://pastebin.com/4E2BrRUK And some info: alfred@alFitop:~$ uname -a Linux alFitop 3.2.0-24-generic #39-Ubuntu SMP Mon May 21 16:52:17 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux lshw: http://pastebin.com/AZbKJmsT sources.list : http://pastebin.com/2HazmuyV My problem is a bit similar to here: http://ubuntuforums.org/showthread.php?t=1918271 Though I didn't change my x.org config. Only changed home directory and updated packages. I've tried memtest and fschk, both passed. In the recovery mode boot option, I've also realized that same things happen in failsafe graphical mode. But when I go into the network mode, I can boot up my system, but of course same the graphics are just basic. Adding blacklist intel_ips to /etc/modprobe.d/blacklist.conf solves the first message, but still I get the broken pipe and CPU stack traces. The current kernel version is 3.2.0-25, I've tried booting up in the 3.2.0-23(the one the installer came with, but same results.) Also uninstalled apparmor, didn't help. I've installed Ubuntu again, this time without copying the home directory, also same result. --- UPDATE --- This problem was solved before with removing backports, but its back again! I've updated my laptop last night and the problem came back. It's definitely one of these packages. My /var/log/apt/term.log and /var/log/apt/history.log. I'm almost having the same situation. --- UPDATE --- I realized this also have happened on times that I have updated(haven't restarted after it) and my computer power has been cut off and its shutdown due to lack of power. And I realized if I just do as I answered but not in somewhere without GUI(networking mode has the GUI) it wouldn't work.

    Read the article

  • Particle System in XNA - cannot draw particle

    - by Dave Voyles
    I'm trying to implement a simple particle system in my XNA project. I'm going by RB Whitaker's tutorial, and it seems simple enough. I'm trying to draw particles within my menu screen. Below I've included the code which I think is applicable. I'm coming up with one error in my build, and it is stating that I need to create a new instance of the EmitterLocation from the particleEngine. When I hover over particleEngine.EmitterLocation = new Vector2(Mouse.GetState().X, Mouse.GetState().Y); it states that particleEngine is returning a null value. What could be causing this? /// <summary> /// Base class for screens that contain a menu of options. The user can /// move up and down to select an entry, or cancel to back out of the screen. /// </summary> abstract class MenuScreen : GameScreen ParticleEngine particleEngine; public void LoadContent(ContentManager content) { if (content == null) { content = new ContentManager(ScreenManager.Game.Services, "Content"); } base.LoadContent(); List<Texture2D> textures = new List<Texture2D>(); textures.Add(content.Load<Texture2D>(@"gfx/circle")); textures.Add(content.Load<Texture2D>(@"gfx/star")); textures.Add(content.Load<Texture2D>(@"gfx/diamond")); particleEngine = new ParticleEngine(textures, new Vector2(400, 240)); } public override void Update(GameTime gameTime, bool otherScreenHasFocus, bool coveredByOtherScreen) { base.Update(gameTime, otherScreenHasFocus, coveredByOtherScreen); // Update each nested MenuEntry object. for (int i = 0; i < menuEntries.Count; i++) { bool isSelected = IsActive && (i == selectedEntry); menuEntries[i].Update(this, isSelected, gameTime); } particleEngine.EmitterLocation = new Vector2(Mouse.GetState().X, Mouse.GetState().Y); particleEngine.Update(); } public override void Draw(GameTime gameTime) { // make sure our entries are in the right place before we draw them UpdateMenuEntryLocations(); GraphicsDevice graphics = ScreenManager.GraphicsDevice; SpriteBatch spriteBatch = ScreenManager.SpriteBatch; SpriteFont font = ScreenManager.Font; spriteBatch.Begin(); // Draw stuff logic spriteBatch.End(); particleEngine.Draw(spriteBatch); }

    Read the article

  • Parenting Opengl with Groups in LibGDX

    - by Rudy_TM
    I am trying to make an object child of a Group, but this object has a draw method that calls opengl to draw in the screen. Its class its this public class OpenGLSquare extends Actor { private static final ImmediateModeRenderer renderer = new ImmediateModeRenderer10(); private static Matrix4 matrix = null; private static Vector2 temp = new Vector2(); public static void setMatrix4(Matrix4 mat) { matrix = mat; } @Override public void draw(SpriteBatch batch, float arg1) { // TODO Auto-generated method stub renderer.begin(matrix, GL10.GL_TRIANGLES); renderer.color(color.r, color.g, color.b, color.a); renderer.vertex(x0, y0, 0f); renderer.color(color.r, color.g, color.b, color.a); renderer.vertex(x0, y1, 0f); renderer.color(color.r, color.g, color.b, color.a); renderer.vertex(x1, y1, 0f); renderer.color(color.r, color.g, color.b, color.a); renderer.vertex(x1, y1, 0f); renderer.color(color.r, color.g, color.b, color.a); renderer.vertex(x1, y0, 0f); renderer.color(color.r, color.g, color.b, color.a); renderer.vertex(x0, y0, 0f); renderer.end(); } } In my screen class I have this, i call it in the constructor MyGroupClass spriteLab = new MyGroupClass(spriteSheetLab); OpenGLSquare square = new OpenGLSquare(); square.setX0(100); square.setY0(200); square.setX1(400); square.setY1(280); square.color.set(Color.BLUE); square.setSize(); //spriteLab.addActorAt(0, clock); spriteLab.addActor(square); stage.addActor(spriteLab); And the render in the screen I have @Override public void render(float arg0) { this.gl.glClear(GL10.GL_COLOR_BUFFER_BIT |GL10.GL_DEPTH_BUFFER_BIT); stage.draw(); stage.act(Gdx.graphics.getDeltaTime()); } The problem its that when i use opengl with parent, it resets all the other chldren to position 0,0 and the opengl renderer paints the square in the exact position of the screen and not relative to the parent. I tried using batch.enableBlending() and batch.disableBlending() that fixes the position problem of the other children, but not the relative position of the opengl drawing and it also puts alpha to the glDrawing. What am i doing wrong?:/

    Read the article

  • With AMD style modules in JavaScript is there any benefit to namespaces?

    - by gman
    Coming from C++ originally and seeing lots of Java programmers doing the same we brought namespaces to JavaScript. See Google's closure library as an example where they have a main namespace, goog and under that many more namespaces like goog.async, goog.graphics But now, having learned the AMD style of requiring modules it seems like namespaces are kind of pointless in JavaScript. Not only pointless but even arguably an anti-pattern. What is AMD? It's a way of defining and including modules that removes all direct dependencies. Effectively you do this // some/module.js define([ 'name/of/needed/module', 'name/of/someother/needed/module', ], function( RefToNeededModule, RefToSomeOtherNeededModule) { ...code... return object or function }); This format lets the AMD support code know that this module needs name/of/needed/module.js and name/of/someother/needed/module.js loaded. The AMD code can load all the modules and then, assuming no circular dependencies, call the define function on each module in the correct order, record the object/function returned by the module as it calls them, and then call any other modules' define function with references to those modules. This seems to remove any need for namespaces. In your own code you can call the reference to any other module anything you want. For example if you had 2 string libraries, even if they define similar functions, as long as they follow the AMD pattern you can easily use both in the same module. No need for namespaces to solve that. It also means there's no hard coded dependencies. For example in Google's closure any module could directly reference another module with something like var value = goog.math.someMathFunc(otherValue) and if you're unlucky it will magically work where as with AMD style you'd have to explicitly include the math library otherwise the module wouldn't have a reference to it since there are no globals with AMD. On top of that dependency injection for testing becomes easy. None of the code in the AMD module references things by namespace so there is no hardcoded namespace paths, you can easily mock classes at testing time. Is there any other point to namespaces or is that something that C++ / Java programmers are bringing to JavaScript that arguably doesn't really belong?

    Read the article

  • Unable to configure/setup 5.1 audio with 12.04

    - by Vipin Vinayan
    I am kinda new to Ubuntu as well. I have been having this issue with audio for quite sometime now. Initially, when I installed version 11.10 (I guess), I was able to use my 5.1 speakers without any issues. If my memory serves me right, it was after an update that the 5.1 audio stopped working and the video resolution would not get saved. I temporarily fixed the resolution issue by creating a start-up shell script that would update the resolution and load it. But the issue with audio has been going on for quite sometime now. Even though I have option for 5.1, only two speakers seem to be working. I thought an upgrade should fix the issue and so upgraded the OS to version 12.04. I also tried uninstalling alsa and pulse audio, reinstalling them, changing the /etc/pulse/daemon.conf channels from 2 to 6. I have also tried installing pavucontrol but nothing seems to have worked and the issue still persists. Is there anything else you could suggest? The lspci log on my computer is as follows 00:00.0 Host bridge: Intel Corporation 82G33/G31/P35/P31 Express DRAM Controller (rev 10) 00:01.0 PCI bridge: Intel Corporation 82G33/G31/P35/P31 Express PCI Express Root Port (rev 10) 00:02.0 VGA compatible controller: Intel Corporation 82G33/G31 Express Integrated Graphics Controller (rev 10) 00:1b.0 Audio device: Intel Corporation N10/ICH 7 Family High Definition Audio Controller (rev 01) 00:1c.0 PCI bridge: Intel Corporation N10/ICH 7 Family PCI Express Port 1 (rev 01) 00:1c.1 PCI bridge: Intel Corporation N10/ICH 7 Family PCI Express Port 2 (rev 01) 00:1d.0 USB controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #1 (rev 01) 00:1d.1 USB controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #2 (rev 01) 00:1d.2 USB controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #3 (rev 01) 00:1d.3 USB controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #4 (rev 01) 00:1d.7 USB controller: Intel Corporation N10/ICH 7 Family USB2 EHCI Controller (rev 01) 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev e1) 00:1f.0 ISA bridge: Intel Corporation 82801GB/GR (ICH7 Family) LPC Interface Bridge (rev 01) 00:1f.1 IDE interface: Intel Corporation 82801G (ICH7 Family) IDE Controller (rev 01) 00:1f.2 IDE interface: Intel Corporation N10/ICH7 Family SATA Controller [IDE mode] (rev 01) 00:1f.3 SMBus: Intel Corporation N10/ICH 7 Family SMBus Controller (rev 01) 03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 01) Would really appreciate a response that will assist me in resolving my issue. Thanks in advance Vipin

    Read the article

  • Unity Dash and top toolbar won't open after updating to 12.10

    - by pgrytdal
    Today, I updated to Ubuntu 12.10. After re-starting, like the updater suggested, the toolbar on the top of the screen, and the dash won't load. I seem to be missing other features, as well, like alttab to switch windows, etc. I am able to access the Terminal, by typing CtrlAltT, which is how I was bale to access Firefox. How do I fix this problem? Edit: 2:10 PM on 10/19/12 As Chris Carter suggested, I'm including the results of the teminal command lspci (Sorry... I dont know how to format between Back-tics): 00:00.0 Host bridge: Advanced Micro Devices [AMD] RS780 Host Bridge 00:01.0 PCI bridge: Acer Incorporated [ALI] AMD RS780/RS880 PCI to PCI bridge (int gfx) 00:04.0 PCI bridge: Advanced Micro Devices [AMD] RS780/RS880 PCI to PCI bridge (PCIE port 0) 00:06.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 2) 00:07.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 3) 00:11.0 SATA controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 SATA Controller [AHCI mode] 00:12.0 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB OHCI0 Controller 00:12.1 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0 USB OHCI1 Controller 00:12.2 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB EHCI Controller 00:13.0 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB OHCI0 Controller 00:13.2 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB EHCI Controller 00:14.0 SMBus: Advanced Micro Devices [AMD] nee ATI SBx00 SMBus Controller (rev 3a) 00:14.2 Audio device: Advanced Micro Devices [AMD] nee ATI SBx00 Azalia (Intel HDA) 00:14.3 ISA bridge: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 LPC host controller 00:14.4 PCI bridge: Advanced Micro Devices [AMD] nee ATI SBx00 PCI to PCI Bridge 00:18.0 Host bridge: Advanced Micro Devices [AMD] Family 11h Processor HyperTransport Configuration (rev 40) 00:18.1 Host bridge: Advanced Micro Devices [AMD] Family 11h Processor Address Map 00:18.2 Host bridge: Advanced Micro Devices [AMD] Family 11h Processor DRAM Controller 00:18.3 Host bridge: Advanced Micro Devices [AMD] Family 11h Processor Miscellaneous Control 00:18.4 Host bridge: Advanced Micro Devices [AMD] Family 11h Processor Link Control 01:05.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI RS780M/RS780MN [Mobility Radeon HD 3200 Graphics] 01:05.1 Audio device: Advanced Micro Devices [AMD] nee ATI RS780 HDMI Audio [Radeon HD 3000-3300 Series] 03:00.0 Ethernet controller: Broadcom Corporation NetLink BCM5784M Gigabit Ethernet PCIe (rev 10) 09:00.0 Network controller: Atheros Communications Inc. AR928X Wireless Network Adapter (PCI-Express) (rev 01)

    Read the article

  • Why does my ID3DXSprite appear to be incorrectly scaled?

    - by Bjoern
    I am using D3D9 for rendering some simple things (a movie) as the backmost layer, then on top of that some text messages, and now wanted to add some buttons to that. Before adding the buttons everything seemed to have worked fine, and I was using a ID3DXSprite for the text as well (ID3DXFont), now I am loading some graphics for the buttons, but they seem to be scaled to something like 1.2 times their original size. In my test window I centered the graphic, but it being too big it just doesnt fit well, for example the client area is 640x360, the graphic is 440, so I expect 100 pixel on left and right, left side is fine [I took screenshot and "counted" the pixels in photoshop], but on the right there is only about 20 pixels) My rendering code is very simple (I am omitting error checks, et cetera, for brevity) // initially viewport was set to width/height of client area // clear device m_d3dDevice->Clear( 0, NULL, D3DCLEAR_TARGET|D3DCLEAR_STENCIL|D3DCLEAR_ZBUFFER, D3DCOLOR_ARGB(0,0,0,0), 1.0f, 0 ); // begin scene m_d3dDevice->BeginScene(); // render movie surface (just two triangles to which the movie is rendered) m_d3dDevice->SetRenderState(D3DRS_ALPHABLENDENABLE,false); m_d3dDevice->SetSamplerState( 0, D3DSAMP_MAGFILTER, D3DTEXF_LINEAR ); // bilinear filtering m_d3dDevice->SetSamplerState( 0, D3DSAMP_MINFILTER, D3DTEXF_LINEAR ); // bilinear filtering m_d3dDevice->SetTextureStageState( 0, D3DTSS_COLORARG1, D3DTA_TEXTURE ); m_d3dDevice->SetTextureStageState( 0, D3DTSS_COLORARG2, D3DTA_DIFFUSE ); //Ignored m_d3dDevice->SetTextureStageState( 0, D3DTSS_COLOROP, D3DTOP_SELECTARG1 ); m_d3dDevice->SetTexture( 0, m_movieTexture ); m_d3dDevice->SetStreamSource(0, m_displayPlaneVertexBuffer, 0, sizeof(Vertex)); m_d3dDevice->SetFVF(Vertex::FVF_Flags); m_d3dDevice->DrawPrimitive(D3DPT_TRIANGLELIST, 0, 2); // render sprites m_sprite->Begin(D3DXSPRITE_ALPHABLEND | D3DXSPRITE_SORT_TEXTURE | D3DXSPRITE_DO_NOT_ADDREF_TEXTURE); // text drop shadow m_font->DrawText( m_playerSprite, m_currentMessage.c_str(), m_currentMessage.size(), &m_playerFontRectDropShadow, DT_RIGHT|DT_TOP|DT_NOCLIP, m_playerFontColorDropShadow ); // text m_font->DrawText( m_playerSprite, m_currentMessage.c_str(), m_currentMessage.size(), &m_playerFontRect, DT_RIGHT|DT_TOP|DT_NOCLIP, m_playerFontColorMessage ) ); // control object m_sprite->Draw( m_texture, 0, 0, &m_vecPos, 0xFFFFFFFF ); // draws a few objects like this m_sprite->End() // end scene m_d3dDevice->EndScene(); What did I forget to do here? Except for the control objects (play button, pause button etc which are placed on a "panel" which is about 440 pixels wide) everything seems fine, the objects are positioned where I expect them, but just too big. By the way I loaded the images using D3DXCreateTextureFromFileEx (resizing wnidow, and reacting to lost device, etc, works fine too). For experimenting, I added some code to take an identity matrix and scale is down on the x/y axis to 0.75f, which then gave me the expected result for the controls (but also made the text smaller and out of position), but I don't know why I would need to scale anything. My rendering code is so simple, I just wanted to draw my 2D objects 1;1 the size they came from the file... I am really very inexperienced in D3D, so the answer might be very simple...

    Read the article

  • Lenovo Thinkpad X1 Carbon support

    - by Robottinosino
    I am considering selling my Mac to get money towards a Lenovo Thinkpad X1 because what I really want to do is to be running an Ubuntu system all the time. Is this machine completely supported in Ubuntu, with no tiny little feature missing just because I am "going Linux"? Optional user story section, skip to the question below if you don't have time: I have a friend who bought a "works on Ubuntu" system a year ago and has hated the fact ever since: battery lasts less than if he boots in Windows (which he despises) and he ascribes that to "no good OS/harware integration and support for advanced chipset power management features", odd behaviour on suspend/resume/hibernate (says: "when it works 90% of the time and the other 10% it makes you lose your work is as good as broken - 90% is the same as 0% he says), some occasional graphics card glitches he can perfectly well live with and has almost grown affectionate to, and finally, and that is what would make him undo his choice if he could, bad "input device drivers". He says: trackpoint and trackpad just "feel different", "so much better" on Windows and that was impossible to know from the website brochure. That story makes me very doubtful... but I want to abandon this "walled garden" of prison that is my Mac and go Ubuntu all the way, no doubt about that! My dilemma at this time is just: "I don't want to live with those eternal frustrations for sure"! Here's a directly answerable phrasing of my question: Is the Lenovo Thinkpad X1 supported on Ubuntu? Yes/no, which version? Which hardware features are not supported? Provide a list Optionally: sort the list in descending order of frustration from your experience Optionally: mention if there are acceptable workarounds to the "out-of-the-box" condition described in the earlier points and whether this ameliorates frustration at least to "tolerable" levels Comment: the Ubuntu hardware certification page is so not-for-end-users it's unreal. Whoa. What would make it end-user friendly is: Link to "buy here and you'll be just fine, this is the right configuration for you, it'll work as long as you press BUY on that page and don't browse further" Remove mentions of may and might not work. Just tell it straight: press buy here and you will get a working system with the exception of A, B, C (so that I can decide whether the philosophical "freedom pleasure" I get from escaping an Apple world is enough to off-balance the loss, for instance, of Bluetooth capabilities (something that I of course use on my Mac) but "could" lose to use free (as in freedom) software The certification page fails to dispel doubts in me as an end-user. I don't feel "eased into Ubuntu", I feel "partially informed".

    Read the article

  • It's possible to fulfill the social necessity of a human being through a social game in 3D like IMVU?

    - by Totty
    (I'm not advertising nor promoting this game, as it's just an example of my experience and I would like to have your opinion about the matter if possible) I've been started researching "things" about games and I've decided to begin to play IMVU as a friend of mine said it's cool. At first it seemed just another 3d social game, not so cool.. But I've "tried to like" and after 1 day I can say I'm addicted to it! Yes; I will explain better: About the game: You can go in chat-rooms, move to positions. Some positions are like sitting in a sofa, floor, dancing alone or with a partner, kissing and more in this way. In the free version of the game there is no nudity. You can even listen to music, view youtube... The 3d graphics are quite low end, so it's not as real as the paid PC games of today. About my experience: At first I was going with my friend in chat-rooms, they seemed very nice. There were people talking about general stuff, quite like in a real life. Well, I begin to know some girls (yes, virtual girls commanded by a real girl, I hope!). Things happened: Some girls are just crazy, not like in real life, they make out in before even talking; Other girls you can speak a little bit, then they add you to their friend-list. Sometimes they invite to their virtual places. Some girls have really IMVU boyfriends only (but not in reality) and most of them don't even make up in the game, so it's really a level of commitment involved here! But from what my friend told they last for him, at least, about 3 days... Some others have real and IMVU boyfriends that are the same. Until now I haven't find a girl with different boyfriend in the IMVU and reality. Nor multiple boyfriends. There are rooms where the same people find each selves every day and speak about general stuff, relationships and so on... They are nice with you, they "feel" you and show careness. This is what amazes me, they treat you like a real human being and as being their friend in the real world. (of course it's not always like this) There are jealous girls too and competitiveness between females lol, I know you loled! This is kind of social. So today I closed my door in my room and I've played it all day long and guess what, I didn't feel a need to stay with a real person at all. Normally, If I would stay a full day alone I would get quite crazy... So the question is: It's just me that seemed to be able to fulfill my social needs or there is something more? thanks for your precious time for reading my full question,

    Read the article

  • Best Frameworks/libraries/engines for 2D multiplayer C# Webbased RPG

    - by Thirlan
    Title is a mouthful but important because I'm looking to meet a specific criteria and it's complex enough that I need a lot of help in finding what I'm looking for. I really want people's suggestions because I trust it a lot more than anything else, so I just need to clearly define what it is I want heh : P Game is a 2D RPG. Think of Secret of Mana. Game is online multiplayer, but not MMO sized. Game must be webbased! I'm looking to the future and want to hit as many platforms as possible. I'm leaning to Webgl because of this, but still looking around. Since the users are seeing the game through the webbrowser the front-end should be mainly responsible for drawing, taking input and some basic checking such as preliminary collision detection. This is important because it means the game engine is NOT on the client's machine. The server should be responsible for the game engine and all the calculations. This means the server is doing all the work and the client is mostly a dumb terminal. Server language is c# I'm looking for fast project execution so I want to use as many pre-existing tools as possible. This would make sense because I'm making a game here, not an engine. I'm not creating some new revolutionary graphics or pushing the physics engines to the next level. Preference for commercially supported tools. For game mechanics reasons and for reasons 4 and 5, don't think I can use existing 2D rpg engines. I've seen them out there and I fear that if I try and use them they will have too many restrictions, but will be happy to hear out suggestions. So all this means I need a game engine on the server, or maybe just a physics engine, and then I need another engine/library to draw everything that the server is sending to the client on the webbrowser. Maybe this is how 50% of games work on the web and there are plenty of frameworks that support this! I wouldn't actually don't know : ( but my gut is telling me that most webgames are single player and 90% of the game is running on the client. So... any suggestions?

    Read the article

  • Software Tuned to Humanity

    - by Phil Factor
    I learned a great deal from a cynical old programmer who once told me that the ideal length of time for a compiler to do its work was the same time it took to roll a cigarette. For development work, this is oh so true. After intently looking at the editing window for an hour or so, it was a relief to look up, stretch, focus the eyes on something else, and roll the possibly-metaphorical cigarette. This was software tuned to humanity. Likewise, a user’s perception of the “ideal” time that an application will take to move from frame to frame, to retrieve information, or to process their input has remained remarkably static for about thirty years, at around 200 ms. Anything else appears, and always has, to be either fast or slow. This could explain why commercial applications, unlike games, simulations and communications, aren’t noticeably faster now than they were when I started programming in the Seventies. Sure, they do a great deal more, but the SLAs that I negotiated in the 1980s for application performance are very similar to what they are nowadays. To prove to myself that this wasn’t just some rose-tinted misperception on my part, I cranked up a Z80-based Jonos CP/M machine (1985) in the roof-space. Within 20 seconds from cold, it had loaded Wordstar and I was ready to write. OK, I got it wrong: some things were faster 30 years ago. Sure, I’d now have had all sorts of animations, wizzy graphics, and other comforting features, but it seems a pity that we have used all that extra CPU and memory to increase the scope of what we develop, and the graphical prettiness, but not to speed the processes needed to complete a business procedure. Never mind the weight, the response time’s great! To achieve 200 ms response times on a Z80, or similar, performance considerations influenced everything one did as a developer. If it meant writing an entire application in assembly code, applying every smart algorithm, and shortcut imaginable to get the application to perform to spec, then so be it. As a result, I’m a dyed-in-the-wool performance freak and find it difficult to change my habits. Conversely, many developers now seem to feel quite differently. While all will acknowledge that performance is important, it’s no longer the virtue is once was, and other factors such as user-experience now take precedence. Am I wrong? If not, then perhaps we need a new school of development technique to rival Agile, dedicated once again to producing applications that smoke the rear wheels rather than pootle elegantly to the shops; that forgo skeuomorphism, cute animation, or architectural elegance in favor of the smell of hot rubber. I struggle to name an application I use that is truly notable for its blistering performance, and would dearly love one to do my everyday work – just as long as it doesn’t go faster than my brain.

    Read the article

  • Support ARMv7 instruction set in Windows Embedded Compact applications

    - by Valter Minute
    On of the most interesting new features of Windows Embedded Compact 7 is support for the ARMv5, ARMv6 and ARMv7 instruction sets instead of the ARMv4 “generic” support provided by the previous releases. This means that code build for Windows Embedded Compact 7 can leverage features (like the FPU unit for ARMv6 and v7) and instructions of the recent ARM cores and improve their performances. Those improvements are noticeable in graphics, floating point calculation and data processing. The ARMv7 instruction set is supported by the latest Cortex-A8, A9 and A15 processor families. Those processor are currently used in tablets, smartphones, in-car navigation systems and provide a great amount of processing power and a low amount of electric power making them very interesting for portable device but also for any kind of device that requires a rich user interface, processing power, connectivity and has to keep its power consumption low. The bad news is that the compiler provided with Visual Studio 2008 does not provide support for ARMv7, building native applications using just the ARMv4 instruction set. Porting a Visual Studio “Smart Device” native C/C++ project to Platform Builder is not easy and you’ll lack many of the features that the VS2008 application development environment provides. You’ll also need access to the BSP and OSDesign configuration for your device to be able to build and debug your application inside Platform Builder and this may prevent independent software vendors from using the new compiler to improve their applications performances. Adeneo Embedded now provides a whitepaper and a Visual Studio plug-in that allows usage of the new ARMv7 enabled compiler to build applications inside Visual Studio 2008. I worked on the whitepaper and the tools, with the help of my colleagues and now the results can be downloaded from Adeneo Embedded’s website: http://www.adeneo-embedded.com/OS-Technologies/Windows-Embedded (Click on the “WEC7 ARMv7 Whitepaper tab to access the download links, free registration required) A very basic benchmark showed a very good performance improvement in integer and floating-point operations. Obviously your mileage may vary and we can’t promise the same amount of improvement on any application, but with a small effort on your side (even smaller if you use the plug-in) you can try on your own application. ARMv7 support is provided using Platform Builder’s compiler and VS2008 application debugger is not able to debut ARMv7 code, so you may need to put in place some workaround like keeping ARMv4 code for debugging etc.

    Read the article

  • 12.04 Unity 3D 80% CPU load with Compiz

    - by user39288
    EDIT : I have been able to to determine that the problem is not compiz, but is actually Xorg. I don't know why, but by quickly maximizing terminal and taking a screenshot with top running before the problem went away I am able to see xorg takes up 72% of cpu, with bamfdaemon taking up 18%, and compiz taking up 14%. Seems the nvidia drivers are to blame, will play more with settings and perhaps do a clean nvidia-current install to try to fix the problem. Having a very annoying problem with high CPU usage. Running 12.04 with latest drivers and nvidia-current installed. Have not had any issues for days, now I have a strange problem. Unity 3d runs great most of the time, 1-2% CPU usage with only transmission running in background. Windows open and close smoothly. However,no matter what programs are open, if I minimize all open programs to the unity bar on the left, my CPU jumps to about 80% and slows down all maximize and minimize effects. Mouse movement stays smooth the whole time, but unity becomes unresponsive for up to 30 seconds at times. Hitting alt + tab to bring up even a single window fixes the problem. The window I bring back up doesn't even have to be maximized to solve the problem. Hitting the super button to bring up the dash makes CPU drop back to idle until I close it, then high CPU usage resumes. Believe the problem is compiz, but even just having only terminal running "top", I have to minimize it to the tray for the problem to show, so I can't see the problem process. I can only tell about the high CPU usage using indicator-sysmonitor. Even tried quitting the indicator, but I can still tell very poor performance with all applications when minimized. Reset compiz back to defaults, tried going to the post-release update nvidia drivers, played with vsync settings in both the nvidia settings and compiz. Even forced refresh rate, but cannot solve the problem. The problem does NOT occur in Unity 2D. Specs are core 2 duo 2.0ghz, 4GB ddr2 ram, 2x 320's HDD in RAID 0, and Nvidia GTX 260M graphics card.

    Read the article

  • Why is my arrow texture being drawn in odd places?

    - by tyjkenn
    This is a script I wrote that places an arrow on the screen, pointing to an enemy off-screen, or, if the enemy is on-screen, it places an arrow hovering above the enemy. Everything seems to work, except for some odd reason, I see random arrows floating around, often skewed and resized (which I really don't understand, because I only rotate and place in this script). Even when I only have one enemy in the scene, I still see these random arrows. It should only be drawing one per enemy. Note: when all enemies are removed, no arrows appear. var arrow : Texture; var cam : Camera; var dim : int = 30; function OnGUI() { var objects = GameObject.FindGameObjectsWithTag("Enemy"); for(var ob : GameObject in objects) { var pos = cam.WorldToViewportPoint(ob.transform.position); if(gameObject.GetComponent(FollowCamera).target != null){ var tar = gameObject.GetComponent(FollowCamera).target.parent; } if(pos.z>1 && ob.transform != tar){ var xDiff = (pos.x*cam.pixelWidth)-(cam.pixelWidth/2); var yDiff = (pos.y*cam.pixelHeight)-(cam.pixelHeight/2); var angle = Mathf.Rad2Deg*Mathf.Atan(yDiff/xDiff)+180; if(xDiff>0) angle += 180; var dist = Mathf.Sqrt(xDiff*xDiff + yDiff*yDiff); var slope = yDiff/xDiff; var camSlope = cam.pixelHeight/cam.pixelWidth; var theX = -1000.0; var theY = -1000.0; var mult = 0; var temp; if(Mathf.Abs(xDiff)>(cam.pixelWidth/2)||Mathf.Abs(yDiff)>(cam.pixelHeight/2)){ //touching right if(slope<camSlope && slope>-camSlope) { if(xDiff>(cam.pixelWidth/2)) { theX = cam.pixelWidth - (dim/2); mult = -1; }else if(xDiff<-(cam.pixelWidth/2)) { theX = (dim/2); mult = 1; } temp = ((cam.pixelWidth/2)*yDiff)/xDiff; theY =(cam.pixelHeight/2)+(mult*temp); } else{ if(yDiff>(cam.pixelHeight/2)) { theY = (dim/2); mult = 1; }else if(yDiff<-(cam.pixelHeight/2)) { theY = cam.pixelHeight - (dim/2); mult = -1; } temp = ((cam.pixelHeight/2)*xDiff)/yDiff; theX =(cam.pixelWidth/2)+(mult*temp); } } else { angle = -90; theX = (cam.pixelWidth/2)+xDiff; theY = (cam.pixelHeight/2)-yDiff-dim; } GUIUtility.RotateAroundPivot(-angle, Vector2(theX, theY)); Graphics.DrawTexture(Rect(theX-(dim/2),theY-(dim/2),dim,dim),arrow,null); GUIUtility.RotateAroundPivot(angle, Vector2(theX, theY)); } } }

    Read the article

  • Oracle R Distribution 3.1.1 Released

    - by Sherry LaMonica-Oracle
    Oracle R Distribution version 3.1.1 has been released to Oracle's public yum today. R-3.1.1 (code name "Sock it to Me") is an update to R-3.1.0 that consists mainly of bug fixes. It also includes enhancements related to accessing package help files, improved accuracy when importing data with large integers, and better integration with RStudio graphics. The full list of new features and bug fixes is listed in the NEWS file.To install Oracle R Distribution using yum, follow the instructions in the Oracle R Enterprise Installation and Administration Guide.Installing using yum will resolve any operating system dependencies automatically. As such, we recommend using yum to install Oracle R Distribution. However, if yum is not available, you can install Oracle R Distribution RPMs directly using RPM commands.For Oracle Linux 5, the Oracle R Distribution RPMs are available in the Enterprise Linux Add-Ons repository:  R-3.1.1-1.el5.x86_64.rpm   R-core-3.1.1-1.el5.x86_64.rpm  R-devel-3.1.1-1.el5.x86_64.rpm  libRmath-3.1.1-1.el5.x86_64.rpm  libRmath-devel-3.1.1-1.el5.x86_64.rpm  libRmath-static-3.1.1-1.el5.x86_64.rpm For Oracle Linux 6, the Oracle R Distribution RPMs are available in the Oracle Linux Add-Ons repository:  R-3.1.1-1.el6.x86_64.rpm  R-core-3.1.1-1.el6.x86_64.rpm  R-devel-3.1.1-1.el6.x86_64.rpm  libRmath-3.1.1-1.el6.x86_64.rpm  libRmath-devel-3.1.1-1.el6.x86_64.rpm  libRmath-static-3.1.1-1.el6.x86_64.rpmFor example, this command installs the R 3.1.1 RPM on Oracle Linux x86-64 version 6:  rpm -i R-3.1.1-1.el6.x86_64.rpm To complete the Oracle R Distribution 3.1.1 installation, repeat this command for each of the 6 RPMs, resolving dependencies as required. Oracle R Distribution 3.1.1 is not yet officially certified with Oracle R Enterprise. Refer to Table 1-2 in the Oracle R Enterprise Installation Guide for supported configurations of Oracle R Enterprise components, or check this blog for updates. The Oracle R Distribution 3.1.1 binaries for Windows, AIX, Solaris SPARC and Solaris x86 will be available on OSS, Oracle's Open Source Software portal, in the coming weeks.

    Read the article

< Previous Page | 198 199 200 201 202 203 204 205 206 207 208 209  | Next Page >