Search Results

Search found 7706 results on 309 pages for 'checked'.

Page 203/309 | < Previous Page | 199 200 201 202 203 204 205 206 207 208 209 210  | Next Page >

• Parallel Port Problem in 12.04

  - by Frank Oberle

  I have a “dumb” printer attached to a parallel port in my machine which works fine under the “other” resident operating system (from Redmond) on the same machine. I recently added Ubuntu 12.04 as a dual boot on the machine, but Ubuntu doesn't seem to recognize the parallel port at all. All I need to set up a printer is a really plain-vanilla fixed pitch text-only generic driver, which is present, but no parallel ports show up. (The other printers, all on USB ports, seem to work just fine). Following what appeared to me to be the most reasonable of the many conflicting pieces of advice on the web, here's what I did: I added the following lines to /etc/modules parport_pc ppdev parport Then, after rebooting, I checked to see that the lines were still present, and they were. I ran dmesg | grep par and got the following references in the output that seemed like they might have to do with the parallel port: [ 14.169511] parport_pc 0000:03:07.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21 [ 14.169516] PCI parallel port detected: 9710:9805, I/O at 0xce00(0xcd00), IRQ 21 [ 14.169577] parport0: PC-style at 0xce00 (0xcd00), irq 21, using FIFO [PCSPP,TRISTATE,COMPAT,ECP] [ 14.354254] lp0: using parport0 (interrupt-driven). [ 14.571358] ppdev: user-space parallel port driver [ 16.588304] type=1400 audit(1347226670.386:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=964 comm="apparmor_parser" [ 16.588756] type=1400 audit(1347226670.386:6): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=964 comm="apparmor_parser" [ 16.673679] type=1400 audit(1347226670.470:7): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=1010 comm="apparmor_parser" [ 16.675252] type=1400 audit(1347226670.470:8): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/mission-control-5" pid=1014 comm="apparmor_parser" [ 16.675716] type=1400 audit(1347226670.470:9): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/telepathy-*" pid=1014 comm="apparmor_parser" [ 16.676636] type=1400 audit(1347226670.474:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/cups/backend/cups-pdf" pid=1015 comm="apparmor_parser" [ 16.677124] type=1400 audit(1347226670.474:11): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/cupsd" pid=1015 comm="apparmor_parser" [ 1545.725328] parport0: ppdev0 forgot to release port I have no idea what any of that means, but the line “parport0: ppdev0 forgot to release port ” seems unusual. I was still unable to add a printer for my old clunker, so I tried the direct approach, typing echo “Hello” > /dev/lp0 and received a Permission denied message. I then tried echo “Hello” > /dev/parport0 which didn't give me any message at all, but still didn't print anything. Running the command sudo /usr/lib/cups/backend/parallel gives the following: direct parallel:/dev/lp0 "unknown" "LPT #1" "" "" Checking the permissions for /dev/parport0, Owner, Group, and Other are all set to read and write. crw-rw---- 1 root lp 6, 0 Sep 9 16:37 /dev/lp0 crw-rw-rw- 1 root lp 99, 0 Sep 9 16:37 /dev/parport0 The output of the command lpinfo -v includes the following line: direct parallel:/dev/lp0 I've read several web postings that seem to suggest this has been a problem for several years, but the bug reports were closed because there wasn't enough information to address the issue (shades of Microsoft!). Any suggestions as to what I might be missing here?

  Read the article

• Paranoid management, contractor checking work [closed]

  - by user833345

  Just wanted to get some opinions and experiences on an issue I'm having at work. First, a little background. I've been working at a company for some time (past any probation periods) and rewriting a horrendous system. No tests, incomplete and broken functionality everywhere, enough copypasta to feed a small village, redundant code, more unused SQL tables than used ones and terrible performance. I've never seen such bad code, pretty much all of it is worthy of being posted on TheDailyWTF. The company has been operating for a number of years and have had a string of bad developers working on this system. I made a call on rewriting instead of refactoring since I judged it to be less work overall and decided that the result will address the requirements more appropriately, since the central requirement is to have a future-proof system for the next decade with plenty of room to scale up. Refactoring would have entailed untangling a huge ball of yarn and at the same time integrating it with a proper foundation or building a foundation from scratch. I've introduced the latest spiffy framework, unit & functional testing, CI, a bug tracker and agile workflow to the environment. I've fixed most of the performance issues of the old system (there were no indexes on any of the tables, for example). I've created an automated deployment process for the old system. The CTO has been maintaining the old system while I have been building the new one and he has been advising management that everything is being done as per best practices. However, management is hiring a contractor to come in and verify my work. In my experience, this is unprecedented. I can understand their reasoning to an extent, since they've had bad luck in the past, but can't help but feel somewhat offended at the fact that they distrust two senior developers who have been working with them for some time enough that a third party is being brought in. And it's not just me who is under watch - people's emails are constantly checked, someone had a remote desktop application installed on their computer of which I was asked to check the usage logs to try to determine if they were stealing sensitive data and there are CCTV cameras in one of the rooms. It's the first time I've decided to disable my Skype history at work. Am I right to feel indignant here? Has anyone else ever encountered such a situation? If so, how did it work out in the end? Was it worth sticking around? Should I just find another job?

  Read the article

• Headaches using distributed version control for traditional teams?

  - by J Cooper

  Though I use and like DVCS for my personal projects, and can totally see how it makes managing contributions to your project from others easier (e.g. your typical Github scenario), it seems like for a "traditional" team there could be some problems over the centralized approach employed by solutions like TFS, Perforce, etc. (By "traditional" I mean a team of developers in an office working on one project that no one person "owns", with potentially everyone touching the same code.) A couple of these problems I've foreseen on my own, but please chime in with other considerations. In a traditional system, when you try to check your change in to the server, if someone else has previously checked in a conflicting change then you are forced to merge before you can check yours in. In the DVCS model, each developer checks in their changes locally and at some point pushes to some other repo. That repo then has a branch of that file that 2 people changed. It seems that now someone must be put in charge of dealing with that situation. A designated person on the team might not have sufficient knowledge of the entire codebase to be able to handle merging all conflicts. So now an extra step has been added where someone has to approach one of those developers, tell him to pull and do the merge and then push again (or you have to build an infrastructure that automates that task). Furthermore, since DVCS tends to make working locally so convenient, it is probable that developers could accumulate a few changes in their local repos before pushing, making such conflicts more common and more complicated. Obviously if everyone on the team only works on different areas of the code, this isn't an issue. But I'm curious about the case where everyone is working on the same code. It seems like the centralized model forces conflicts to be dealt with quickly and frequently, minimizing the need to do large, painful merges or have anyone "police" the main repo. So for those of you who do use a DVCS with your team in your office, how do you handle such cases? Do you find your daily (or more likely, weekly) workflow affected negatively? Are there any other considerations I should be aware of before recommending a DVCS at my workplace?

  Read the article

• SFML 2.0 Too Many Variables in Class Preventing Draw To Screen

  - by Josh

  This is a very strange phenomenon to me. I have a class definition for a game, but when I add another variable to the class, the draw method does not print everything to the screen. It will be easier understood showing the code and output. Code for good draw output: class board { protected: RectangleShape rect; int top, left; int i, j; int rowSelect, columnSelect; CircleShape circleArr[4][10]; CircleShape codeArr[4]; CircleShape keyArr[4][10]; //int pegPresent[4]; public: board(void); void draw(RenderWindow& Window); int mouseOver(RenderWindow& Window); void placePeg(RenderWindow& Window, int pegSelect); }; Screen: Code for missing draw: class board { protected: RectangleShape rect; int top, left; int i, j; int rowSelect, columnSelect; CircleShape circleArr[4][10]; CircleShape codeArr[4]; CircleShape keyArr[4][10]; int pegPresent[4]; public: board(void); void draw(RenderWindow& Window); int mouseOver(RenderWindow& Window); void placePeg(RenderWindow& Window, int pegSelect); }; Screen: As you can see, all I do is un-comment the protected array and most of the pegs are gone from the right hand side. I have checked and made sure that I didn't accidentally created a variable with that name already. I haven't used it anywhere. Why does it not draw the remaining pegs as it should? My only thought is that maybe I am declaring too many variables for the class, but that doesn't really make sense to me. Any thoughts and help is greatly appreciated.

  Read the article

• Are there any concerns with using a static read-only unit of work so that it behaves like a cache?

  - by Rowan Freeman

  Related question: How do I cache data that rarely changes? I'm making an ASP.NET MVC4 application. On every request the security details about the user will need to be checked with the area/controller/action that they are accessing to see if they are allowed to view it. The security information is stored in the database. For example: User Permission UserPermission Action ActionPermission A "Permission" is a token that is applied to an MVC action to indicate that the token is required in order to access the action. Once a user is given the permission (via the UserPermission table) then they have the token and can therefore access the action. I've been looking in to how to cache this data (since it rarely changes) so that I'm only querying in-memory data and not hitting a database (which is a considerable performance hit at the moment). I've tried storing things in lists, using a caching provider but I either run in to problems or performance doesn't improve. One problem that I constantly run in to is that I'm using lazy loading and dynamic proxies with EntityFramework. This means that even if I ToList() everything and store them somewhere static, the relationships are never populated. For example, User.Permissions is an ICollection but it's always null. I don't want to Include() everything because I'm trying to keep things simple and generic (and easy to modify). One thing I know is that an EntityFramework DbContext is a unit of work that acts with 1st-level caching. That is, for the duration of the unit of work, everything that is accessed is cached in memory. I want to create a read-only DbContext that will exist indefinitely and will only be used to read about permission data. Upon testing this it worked perfectly; my page load times went from 200ms+ to 20ms. I can easily force the data to refresh at certain intervals or simply leave it to refresh when the application pool is recycled. Basically it will behave like a cache. Note that the rest of the application will interact with other contexts that exist per request as normal. Is there any disadvantage to this approach? Could I be doing something different?

  Read the article

• Can see samba shares but not access them

  - by nitefrog

  For the life of me I cannot figure this one out. I have samba installed and set up on the ubuntu box and on the Win7 box I CAN SEE all the shares I created. I created two users on ubuntu that map to the users in windows. On ubuntu they are both admins, user A & B on Windows User A is admin and user B is poweruser. User A can see both shares and access them, but user B can see everythin, but only access the homes directory, the other directory throws an error. I have two drives in Ubuntu and this is the smb.config file (I am new to samba): [global] workgroup = WORKGROUP server string = %h server (Samba, Ubuntu) wins support = no dns proxy = yes name resolve order = lmhosts host wins bcast log file = /var/log/samba/log.%m max log size = 1000 syslog = 0 panic action = /usr/share/samba/panic-action %d security = user encrypt passwords = true passdb backend = tdbsam obey pam restrictions = yes unix password sync = yes passwd program = /usr/bin/passwd %u passwd chat = *Enter\snew\s*\spassword:* %n\n *Retype\snew\s*\spassword:* %n\n *password\supdated\ssuccessfully* . pam password change = yes map to guest = bad user ; usershare max shares = 100 usershare allow guests = yes And here is the share section: Both user A & B can access this from windows. No problems. [homes] comment = Home Directories browseable = no writable = yes Both User A & B can see this share, but only user A can access it. User B get an error thrown. [stuff] comment = Unixmen File Server path = /media/data/appinstall/ browseable = yes ;writable = no read only = yes hosts allow = The permission for the media/data/appinstall/ is as follows: appInstall properties: share name: stuff Allow others to create and delete files in this folder is cheeked Guest access (for people without a user account) is checked permissions: Owner: user A Folder Access: Create and delete files File Access: --- Group: user A Folder Access: Create and delete files File Access: --- Others Folder Access: Create and delete files File Access: --- I am at a loss and need to get this work. Any ideas? The goal is to have a setup like this. 3 users on window machines. Each user on the data drive will have their own personal folder where they are the ones that can only access, then another folder where 2 of the users will have read only and one user full access. I had this setup before on windows, but after what happened I am NEVER going back to windows, so Unix here I am to stay! I am really stuck. I am running Ubuntu 11. I could reformat again and put on version 10 if that would make life easier. I have been dealing with this since Wed. 3pm. Thanks.

  Read the article

• Behaviour Trees with irregular updates

  - by Robominister

  I'm interested in behaviour trees that aren't iterated every game tick, but every so often. (Edit: the tree could specify how many frames within the main game loop to wait before running its tick function again). Every theoretical implementation I have seen of behaviour trees talks of the tree search being carried out every game update - which seems necessary, because a leaf node (eg a behaviour, like 'return to base') needs to be constantly checked to see if is still running, failed or completed. Can anyone suggest how I might start implementing a tree that isnt run every tick, or point me in the direction of good material specific to this case (I am struggling to find anything)? My thoughts so far: action leaf nodes (when they start) must only push some kind of action object onto a list for an entity, rather than directly calling any code that makes the entity do something. The list of actions for the entity would be run every frame (update any that need to run, pop any that have completed from the list). the return state from a given action must be fed back into the tree, so that when we run the tree iteration again (and reach the same action leaf node - so the tree has so far determined that we ought to still be trying this action) - that the action has completed, or is still running etc. If my actual action code is running from an action list on an entity, then I possibly need to cancel previously running actions in the list - i am thinking that I can just delete the entire stack of queued up actions. I've seen the idea of ActionLists which block lower priority actions when a higher priority one is added, but this seems like very close logic to behaviour trees, and I dont want to be duplicating behaviour. This leaves me with some questions 1) How would I feed the action return state back into the tree? Its obvious I need to store some information relating to 'currently executing actions' on the entity, and check that in the tree tick, but I can't imagine how. 2) Does having a seperate behaviour tree (for deciding behaviour) and action list (for carrying out actual queued up actions) sound like a reasonable approach? 3) Is the approach of updating a behaviour tree irregularly actually used by anyone? It seems like a nice idea for budgeting ai search time when you have a lot of ai entities to process. (Edit) - I am also thinking about storing a single instance of a given behaviour tree in memory, and providing it by reference to any entity that uses it. So any information about what action was last selected for execution on an entity must be stored in a data context relative to the entity (which the tree can check). (I am probably answering my own questions as i go!) I hope I have expressed my questions adequately! Thanks in advance for any help :)

  Read the article

• determine if udp socket can be accessed via external client

  - by JohnMerlino

  I don't have access to company firewall server. but supposedly the port 1720 is open on my one ubuntu server. So I want to test it with netcat: sudo nc -ul 1720 The port is listening on the machine ITSELF: sudo netstat -tulpn | grep nc udp 0 0 0.0.0.0:1720 0.0.0.0:* 29477/nc The port is open and in use on the machine ITSELF: lsof -i -n -P | grep 1720 gateway 980 myuser 8u IPv4 187284576 0t0 UDP *:1720 Checked the firewall on current server: sudo ufw allow 1720/udp Skipping adding existing rule Skipping adding existing rule (v6) sudo ufw status verbose | grep 1720 1720/udp ALLOW IN Anywhere 1720/udp ALLOW IN Anywhere (v6) But I try echoing data to it from another computer (I replaced the x's with the real integers): echo "Some data to send" | nc xx.xxx.xx.xxx 1720 But it didn't write anything. So then I try with telnet from the other computer as well: telnet xx.xxx.xx.xxx 1720 Trying xx.xxx.xx.xxx... telnet: connect to address xx.xxx.xx.xxx: Operation timed out telnet: Unable to connect to remote host Although I don't think telnet works with udp sockets. I ran nmap from another computer within the same local network and this is what I got: sudo nmap -v -A -sU -p 1720 xx.xxx.xx.xx Starting Nmap 5.21 ( http://nmap.org ) at 2013-10-31 15:41 EDT NSE: Loaded 36 scripts for scanning. Initiating Ping Scan at 15:41 Scanning xx.xxx.xx.xx [4 ports] Completed Ping Scan at 15:41, 0.10s elapsed (1 total hosts) Initiating Parallel DNS resolution of 1 host. at 15:41 Completed Parallel DNS resolution of 1 host. at 15:41, 0.00s elapsed Initiating UDP Scan at 15:41 Scanning xtremek.com (xx.xxx.xx.xx) [1 port] Completed UDP Scan at 15:41, 0.07s elapsed (1 total ports) Initiating Service scan at 15:41 Initiating OS detection (try #1) against xtremek.com (xx.xxx.xx.xx) Retrying OS detection (try #2) against xtremek.com (xx.xxx.xx.xx) Initiating Traceroute at 15:41 Completed Traceroute at 15:41, 0.01s elapsed NSE: Script scanning xx.xxx.xx.xx. NSE: Script Scanning completed. Nmap scan report for xtremek.com (xx.xxx.xx.xx) Host is up (0.00013s latency). PORT STATE SERVICE VERSION 1720/udp closed unknown Too many fingerprints match this host to give specific OS details Network Distance: 1 hop TRACEROUTE (using port 1720/udp) HOP RTT ADDRESS 1 0.13 ms xtremek.com (xx.xxx.xx.xx) Read data files from: /usr/share/nmap OS and Service detection performed. Please report any incorrect results at http://nmap.org/submit/ . Nmap done: 1 IP address (1 host up) scanned in 2.04 seconds Raw packets sent: 27 (2128B) | Rcvd: 24 (2248B). The only thing I can think of is a firewall or vpn issue. Is there anything else I can check for before requesting that they look at the firewall server again?

  Read the article

• Small script to look for Project Replication actions that have failed

  - by Trond Strømme

  Today when looking at a couple of projects on a ZFS 7320 Storage Appliance I noticed on one project that one of its replication actions had failed, as I hadn't checked the Recent Alerts log yet I was not aware of this. I decided to write a small script to check if there were others that had failed. Nothing fancy, just a loop through all projects, look at the project's replication child and compare the values of the last_sync and last_try properties and print the result if they're not equal. (There are probably more sensible ways of doing this, but at least it involves me getting the chance to put on my headphones and doing just a little bit of coding.) script // this script will locate failed project level replication // it will look at the sync times for 'last_sync' and 'last_try' // and compare these, if they deviate you should investigate. // NOTE! this code is offered 'as is' Run at your own risk, // it will probably work as intended, but in now way can I // (or Oracle) be held responsible if your server starts behaving // like a three year old kid in a candy store.. (not that mine do, // they are very well behaved boys...) run('configuration'); run('storage'); printf('Host: %s, pool: %s\n', get('owner'),get('pool')); run('cd /'); run('shares'); proj=list(); printf("total projects: %d\n",proj.length +'\n'); // just for project level replication for(i=0;i<proj.length;i++){ run('select '+proj[i]); run('replication'); //get all replication actions preps = list(); for(j=0;j<preps.length;j++){ run('select ' + preps[j]); last_sync = get('last_sync'); last_try = get('last_try'); // printf("target %s\n", get('target')); //why the flip does this not get the proper name? if(!( last_sync.valueOf() === last_try.valueOf())){ printf("sync has failed for %s %s\n", proj[i], get('target')); }else{ // printf("OK %s %s\n", proj[i], get('target')); } run('done'); //done with the replica action } run('done'); run('done'); } printf("finished\n"); For a more on how to run the script, or testing it please look at my previous post. Sample output: Host: elb1sn01, pool: exalogic total projects: 45 sync has failed for ACSExalogicSystem cb3a24fe-ad60-c90f-d15d-adaafd595639 finished

  Read the article

• Uniform not being applied to proper mesh

  - by HaMMeReD

  Ok, I got some code, and you select blocks on a grid. The selection works. I can modify the blocks to be raised when selected and the correct one shows. I set a color which I use in the shader. However, I am trying to change the color before rendering the geometry, and the last rendered geometry (in the sequence) is rendered light. However, to debug logic I decided to move the block up and make it white, in which case one block moves up and another block becomes white. I checked all my logic and it knows the correct one is selected and it is showing in, in the correct place and rendering it correctly. When there is only 1 it works properly. Video Of the bug in action, note how the highlighted and elevated blocks are not the same block, however the code for color and My Renderer is here (For the items being drawn) public void render(Renderer renderer) { mGrid.render(renderer, mGameState); for (Entity e:mGameEntities) { UnitTypes ut = UnitTypes.valueOf((String)e.getObject(D.UNIT_TYPE.ordinal())); if (ut == UnitTypes.Soldier) { renderer.testShader.begin(); renderer.testShader.setUniformMatrix("u_mvpMatrix",mEntityMatrix); renderer.texture_soldier.bind(0); Vector2 pos = (Vector2) e.getObject(D.COORDS.ordinal()); mEntityMatrix.set(renderer.mCamera.combined); if (mSelectedEntities.contains(e)) { mEntityMatrix.translate(pos.x, 1f, pos.y); renderer.testShader.setUniformf("v_color", 0.5f,0.5f,0.5f,1f); } else { mEntityMatrix.translate(pos.x, 0f, pos.y); renderer.testShader.setUniformf("v_color", 1f,1f,1f,1f); } mEntityMatrix.scale(0.2f, 0.2f, 0.2f); renderer.model_soldier.render(renderer.testShader,GL20.GL_TRIANGLES); renderer.testShader.end(); } else if (ut == UnitTypes.Enemy_Infiltrator) { renderer.testShader.begin(); renderer.testShader.setUniformMatrix("u_mvpMatrix",mEntityMatrix); renderer.testShader.setUniformf("v_color", 1.0f,1,1,1.0f); renderer.texture_enemy_infiltrator.bind(0); Vector2 pos = (Vector2) e.getObject(D.COORDS.ordinal()); mEntityMatrix.set(renderer.mCamera.combined); mEntityMatrix.translate(pos.x, 0f, pos.y); mEntityMatrix.scale(0.2f, 0.2f, 0.2f); renderer.model_enemy_infiltrator.render(renderer.testShader,GL20.GL_TRIANGLES); renderer.testShader.end(); } } }

  Read the article

• How Do I Do Alpha Transparency Properly In XNA 4.0?

  - by Soshimo

  Okay, I've read several articles, tutorials, and questions regarding this. Most point to the same technique which doesn't solve my problem. I need the ability to create semi-transparent sprites (texture2D's really) and have them overlay another sprite. I can achieve that somewhat with the code samples I've found but I'm not satisfied with the results and I know there is a way to do this. In mobile programming (BREW) we did it old school and actually checked each pixel for transparency before rendering. In this case it seems to render the sprite below it blended with the alpha above it. This may be an artifact of how I'm rendering the texture but, as I said before, all examples point to this one technique. Before I go any further I'll go ahead and paste my example code. public void Draw(SpriteBatch batch, Camera camera, float alpha) { int tileMapWidth = Width; int tileMapHeight = Height; batch.Begin(SpriteSortMode.Texture, BlendState.AlphaBlend, SamplerState.PointWrap, DepthStencilState.Default, RasterizerState.CullNone, null, camera.TransformMatrix); for (int x = 0; x < tileMapWidth; x++) { for (int y = 0; y < tileMapHeight; y++) { int tileIndex = _map[y, x]; if (tileIndex != -1) { Texture2D texture = _tileTextures[tileIndex]; batch.Draw( texture, new Rectangle( (x * Engine.TileWidth), (y * Engine.TileHeight), Engine.TileWidth, Engine.TileHeight), new Color(new Vector4(1f, 1f, 1f, alpha ))); } } } batch.End(); } As you can see, in this code I'm using the overloaded SpriteBatch.Begin method which takes, among other things, a blend state. I'm almost positive that's my problem. I don't want to BLEND the sprites, I want them to be transparent when alpha is 0. In this example I can set alpha to 0 but it still renders both tiles, with the lower z ordered sprite showing through, discolored because of the blending. This is not a desired effect, I want the higher z-ordered sprite to fade out and not effect the color beneath it in such a manner. I might be way off here as I'm fairly new to XNA development so feel free to steer me in the correct direction in the event I'm going down the wrong rabbit hole. TIA

  Read the article

• Methodology to understanding JQuery plugin & API's developed by third parties

  - by Taoist

  I have a question about third party created JQuery plug ins and API's and the methodology for understanding them. Recently I downloaded the JQuery Masonry/Infinite scroll plug in and I couldn't figure out how to configure it based on the instructions. So I downloaded a fully developed demo, then manually deleted everything that wouldn't break the functionality. The code that was left allowed me to understand the plug in much greater detail than the documentation. I'm now having a similar issue with a plug in called JQuery knob. http://anthonyterrien.com/knob/ If you look at the JQuery Knob readme file it says this is working code: $(function() { $('.dial') .trigger( 'configure', { "min":10, "max":40, "fgColor":"#FF0000", "skin":"tron", "cursor":true } ); }); But as far as I can tell it isn't at all. The read me also says the Plug in uses Canvas. I am wondering if I am suppose to wrap this code in a canvas context or if this functionality is already part of the plug in. I know this kind of "question" might not fit in here but I'm a bit confused on the assumptions around reading these kinds of documentation and thought I would post the query regardless. Curious to see if this is due to my "newbi" programming experience or if this is something seasoned coders also fight with. Thank you. Edit In response to Tyanna's reply. I modified the code and it still doesn't work. I posted it below. I made sure that I checked the Google Console to insure the basics were taken care of, such as not getting a read-error on the library. <!DOCTYPE html> <meta charset="UTF-8"> <title>knob</title> <link rel="stylesheet" href="http://ajax.googleapis.com/ajax/libs/jqueryui/1.7.2/themes/hot-sneaks/jquery-ui.css" type="text/css" /> <script type="text/javascript" src="https://ajax.googleapis.com/ajax/libs/jquery/1.7.2/jquery.js" charset="utf-8"></script> <script src="https://ajax.googleapis.com/ajax/libs/jqueryui/1.8.21/jquery-ui.min.js"></script> <script src="js/jquery.knob.js"></script> <div id="button1">test </div> <script> $(function() { $("#button1").click(function () { $('.dial').trigger( 'configure', { "min":10, "max":40, "fgColor":"#FF0000", "skin":"tron", "cursor":true } ); }); }); </script>

  Read the article

• Getting a virus is *very* annoying

  - by bconlon

  I spent most of yesterday removing an annoying virus from my PC. I feel slightly foolish for getting one in the first place, but after so many years I guess I was always going to eventually succumb. I was also a little surprised at the failure of various tools at removing it. The virus would redirect the browser to websites including ‘licosearch’, ‘hugosearch’ and ‘facebook’, and the disk would be thrashing away infecting dlls in some way. I had the full up to date version of McAfee installed. This identified that there was an issue in some dlls on the system and was able to ‘fix’ them. But they kept getting re-infected. So I installed Microsoft Security Essentials and this too was able to identify and ‘fix’ the infected dlls. The system scans take forever and I really expected better results. I also tried Malwarebytes, Hitman Pro, AVG and Sophos to no avail. Eventually I thought I’d investigate myself. It turned out that on reboot, the virus would start 3 instances of Firefox.exe which I’m guessing would do bad things including infecting as many dlls on the system as possible. I removed Firefox and the virus cleverly then launched 3 instances of Chrome! So I uninstalled Chrome and yes, it then started to launch 3 instances of iexplore.exe. If I’m honest, by this stage I was just seeing if it would be able to use any of the browsers! As it was starting these on reboot, I looked in my User Startup folder and there was a <randomly named>.exe and several log files. I deleted these and rebooted. When I looked they had been recreated. So I then looked in the registry Run and RunOnce entries: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Run. Sure enough there were entries to run a file in C:\Program Files\<random name folder>\<random name file>.exe. I deleted this and rebooted and it was fixed. I also looked in the event log and found a warning that Winlogon had failed to start the file C:\Program Files\<random name folder>\<random name file>.exe So I also checked HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon and this entry had also been changed. Finally I ran a full system scan to clean up any infected dlls. I hope it’s gone for good!  #

  Read the article

• New computer hangs on shutdown/reboot, how to troubleshoot?

  - by Torben Gundtofte-Bruun

  My system is working perfectly but it freezes during shutdown/reboot/suspend/hibernate: All windows and the menu bar disappear but the desktop wallpaper remains. It doesn't even show the shutdown screen (the one with the animated dots) where I could hit ESC and watch the shutdown console text. The system is brand-new and fully updated using Update Manager. How can I determine what is causing the freeze? Is there a log I can investigate? How can I fix this? I see no obvious cause of the freeze. The only USB attachment is a mouse/keyboard; I don't have any external storage attached; and I don't have any programs running (the machine freezes even when doing shutdown right from the login screen). What I've tried so far: Based on other questions (this, this, and this) that suggest some ACPI settings, I've tried sudo shutdown -h now to see whether the shutdown console text display offers any hints, but the system doesn't even get that far - it still freezes while the screen shown the desktop background image, without any toolbars. Only sudo shutdown --force works, but that's not a solution. Editing the grub menu to add acpi=off to the kernel didn't help. I guess there's not much point in trying the other (lesser) ACPI suggestions? Adding noapic to the grub entry had no discernible effect. Adding nolapic instead did something (I had removed the quiet option) - the system managed to continue further with the shutdown, right until the line Checking for running unattended-upgrades: which were the last characters on the screen. I've also checked the system BIOS, especially regarding power options, but didn't see anything out of the ordinary. Switching the BIOS standby setting from S3 to S1 didn't help. The standby setting can't be disabled, and there are no other ACPI-related settings AFAIK. BIOS reset didn't help. Not surprised; hadn't changed anything. I tried going to a virtual console (CtrlAltF1) as suggested by djeikyb and from there did a shutdown -h now and it froze there too, after this console output. I didn't try killing processes one at a time because I'm still too newbie to figure out how to do that. Booting with kernel 2.6.35.22 rather than 2.6.35.25 didn't help. Disabling the Nvidia drivers didn't help. Booting from Live CD (USB stick in fact) didn't help; it freezes the same way. Booting from Live CD, with acpi=off noapic nolapic didn't help either. Neither did just nolapic. So evidently this is not some custom setting in my install, but some sort of basic issue. MemTest competed in 1 hour without errors.

  Read the article

• Enabling Attachments in Oracle Forms

  - by Manoj Madhusoodanan

  In this blog I will demonstrate how we can enable attachments in Oracle Form. The user ask is to capture a job description which will be along text. Oracle Apps has a feature called attachments, through some easy setup we can enable attachments in forms. We will be going to addresscustomer ask through this feature. Step 1 : Identify Form Name First thing you have to do is to identify the form to enable attachment. In this scenario form will be PERWSDJT ( Job form in HRMS ). Step 2 :  Identify Document Entity exists or not. If exists then do nothing otherwise create new. Step 3 : Create Document Categories. Here I will create a category Job Description with Default Data Type Long Text and Application Human Resources.Onceit is done I will assign this to Create Job form. Step: 3 Query Attachment Functions for PERWSDJT. Click on Categories and add Job Description.Make sure enabled check box is checked. v\:* {behavior:url(#default#VML);} o\:* {behavior:url(#default#VML);} w\:* {behavior:url(#default#VML);} .shape {behavior:url(#default#VML);} Normal 0 false false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} Step 4 : Turn off HR:Use Standard Attachments profile option. Output Go to Work Structures > Job > Description

  Read the article

• Facial Recognition for Retail

  - by David Dorf

  My son decided to do his science project on how the brain recognizes faces.  Faces are so complicated and important that the brain has a dedicated area for just that purpose.  During our research, we came across some emerging uses for facial recognition in the retail industry. If you believe the movies, recognizing faces as they walk by a camera is easy for computers but that's not the reality.  Huge investments are being made by the U.S. government in this area, with a focus on airport security.  Now, companies like Eye See are leveraging that research for marketing purposes.  They do things like track eyes while viewing newspaper ads to see which ads get more "eye time."  This can help marketers make better placement and color decisions. But what caught my eye (that was too easy) was their new mannequins that watch shoppers.  These mannequins, being tested at European retailers like Benetton, watch shoppers that walk by and identify their gender, race, and age.  This helps the retailer better understand the types of customers being attracted to the outfit on the mannequin.  Of course to be most accurate, the software has pictures of the employees so they can be filtered out.  Since the mannequins are closer to the shoppers and at eye-level, they are more accurate than traditional in-ceiling LP cameras. Marketing agency RedPepper is offering retailers the ability to recognize loyalty shoppers at their doors using Facedeal.  For customers that have opted into the program, when they enter the store their face is recognized and they are checked in.  Then, as a reward, they are sent an offer on their smartphone. It won't be long before retailers begin to listen to shoppers are they walk the aisles, then keywords can be collected and aggregated to give the retailer an idea of what people are saying about their stores and products.  Sentiment analysis based on what's said or even facial expressions can't be far off. Clearly retailers need to be cautions and respect customer privacy.  That's why these technologies are emerging slowly.  But since the next generation of shoppers are less concerned about privacy, I expect these technologies to appear sporadically in the next five years then go mainstream.  Time will tell.

  Read the article

• Get AutoHotkey Script To Run As Admin At Startup

  - by deadlydog

  A few weeks back I posted some problems with running AutoHotkey (AHK) in Windows 8, and that the solution was to run your AHK script as admin.  I also showed how to have the script start automatically when you logged into Windows.  What I didn’t realize at the time though was that the method only worked because I had disabled UAC in the registry (which prevents most Metro apps from working in Windows 8, and likely isn’t acceptable for most people). So here is a Windows 8, UAC-friendly method to accomplish the same task (also works in previous versions of Windows).  The trick is to use the Task Scheduler: 1. Open the Task Scheduler (also known as “Schedule tasks” in Windows 8 Settings).   2. Create a new Basic Task. 3. Give it a name and description (something like “launch AutoHotkey script at login”), and then specify to have it run “When I log on”.  Then specify that you want it to “Start a program”, and then point it towards your AutoHotkey script.  Before you finish the wizard, check off “Open the Properties dialog for this task when I click Finish”.   4. When that Properties dialog opens up, go to the Conditions tab and make sure none of the checkboxes under the Power category are checked off; this will ensure the script still launches if you are on a laptop and not plugged into AC power.   5. Now here is the important part; To have your script “Run as admin”, on the General tab check off “Run with highest privileges”. Now your AHK script should start automatically as soon as you log into Windows; even when UAC is enabled   6. If your AHK script uses an #Include statement to include other files, you may get an error similar to this one when your task runs: “#Include file … cannot be opened. The program will exit.” The solution to this is to tell your AHK script to start in the same directory as the file that you want to include.  So you will need to edit your scheduled task’s Action to specify the Start In directory. Happy coding!

  Read the article

• RAID1: can't replace faulty spare (marked again as 'faulty spare' within seconds)

  - by user212475

  I got a problem that I cannot solve: Our fileserver runs XUbuntu and 3 RAID1s. One has a problem since monday: it consists of sdb and sdc. sdb was marked as faulty by mdadm for unknown reasons. I used --remove to remove it from the RAID and then to add it by --add. All was fine, re-syncing started but never got above 0% and after a few seconds, sdb was again marked as 'faulty spare' (and therefore the RAID degraded, but clean). So I saved the first 512 byte of the old sdb to a file, bought a new HDD of same size (4TB), shut down the computer and replaced sdb physically, switched the computer back on and wrote the 512 byte back to the new drive to have the same partition info as the old drive (both are the same type, from same company). But the new drive shows the same behaviour as the old: I can add, re-syncing starts and after a few seconds its marked as 'faulty spare'. Here exactly what i did: mdadm --remove /dev/md/1 /dev/sdb maadm --detail /dev/md/1 gives me: /dev/md/1: Version : 1.2 Creation Time : Sat Jun 8 22:32:05 2013 Raid Level : raid1 Array Size : 3906887360 (3725.90 GiB 4000.65 GB) Used Dev Size : 3906887360 (3725.90 GiB 4000.65 GB) Raid Devices : 2 Total Devices : 1 Persistence : Superblock is persistent Update Time : Thu Nov 7 06:56:13 2013 State : clean, degraded Active Devices : 1 Working Devices : 1 Failed Devices : 0 Spare Devices : 0 Name : File-Server:1 (local to host File-Server) UUID : 44ed561f:b733e946:e69820f4:aba9b223 Events : 2424 Number Major Minor RaidDevice State 0 0 0 0 removed 1 8 32 1 active sync /dev/sdc mdadm --add /dev/md/1 /dev/sdb mdadm --detail /dev/md/1 gives me: Version : 1.2 Creation Time : Sat Jun 8 22:32:05 2013 Raid Level : raid1 Array Size : 3906887360 (3725.90 GiB 4000.65 GB) Used Dev Size : 3906887360 (3725.90 GiB 4000.65 GB) Raid Devices : 2 Total Devices : 2 Persistence : Superblock is persistent Update Time : Thu Nov 7 06:57:49 2013 State : clean, degraded, recovering Active Devices : 1 Working Devices : 1 Failed Devices : 1 Spare Devices : 0 Rebuild Status : 0% complete Name : File-Server:1 (local to host File-Server) UUID : 44ed561f:b733e946:e69820f4:aba9b223 Events : 2431 Number Major Minor RaidDevice State 2 8 16 0 faulty spare rebuilding /dev/sdb 1 8 32 1 active sync /dev/sdc and after a few seconds: /dev/md/1: Version : 1.2 Creation Time : Sat Jun 8 22:32:05 2013 Raid Level : raid1 Array Size : 3906887360 (3725.90 GiB 4000.65 GB) Used Dev Size : 3906887360 (3725.90 GiB 4000.65 GB) Raid Devices : 2 Total Devices : 2 Persistence : Superblock is persistent Update Time : Thu Nov 7 06:57:50 2013 State : clean, degraded Active Devices : 1 Working Devices : 1 Failed Devices : 1 Spare Devices : 0 Name : File-Server:1 (local to host File-Server) UUID : 44ed561f:b733e946:e69820f4:aba9b223 Events : 2436 Number Major Minor RaidDevice State 0 0 0 0 removed 1 8 32 1 active sync /dev/sdc 2 8 16 - faulty spare /dev/sdb same behaviour if I zero the superblock (mdadm --zero-superblock /dev/sdb) before adding sdb. I do all commands as root and the system holds 3 more 4TB drives, ie the mainboard can handle them. The old harddrive was checked for errors using badblocks, but all is fine. Does anybody have any idea, what the problem is?

  Read the article

• How to get better at solving Dynamic programming problems

  - by newbie

  I recently came across this question: "You are given a boolean expression consisting of a string of the symbols 'true', 'false', 'and', 'or', and 'xor'. Count the number of ways to parenthesize the expression such that it will evaluate to true. For example, there is only 1 way to parenthesize 'true and false xor true' such that it evaluates to true." I knew it is a dynamic programming problem so i tried to come up with a solution on my own which is as follows. Suppose we have a expression as A.B.C.....D where '.' represents any of the operations and, or, xor and the capital letters represent true or false. Lets say the number of ways for this expression of size K to produce a true is N. when a new boolean value E is added to this expression there are 2 ways to parenthesize this new expression 1. ((A.B.C.....D).E) ie. with all possible parenthesizations of A.B.C.....D we add E at the end. 2. (A.B.C.(D.E)) ie. evaluate D.E first and then find the number of ways this expression of size K can produce true. suppose T[K] is the number of ways the expression with size K produces true then T[k]=val1+val2+val3 where val1,val2,val3 are calculated as follows. 1)when E is grouped with D. i)It does not change the value of D ii)it inverses the value of D in the first case val1=T[K]=N.( As this reduces to the initial A.B.C....D expression ). In the second case re-evaluate dp[K] with value of D reversed and that is val1. 2)when E is grouped with the whole expression. //val2 contains the number of 'true' E will produce with expressions which gave 'true' among all parenthesized instances of A.B.C.......D i) if true.E = true then val2 = N ii) if true.E = false then val2 = 0 //val3 contains the number of 'true' E will produce with expressions which gave 'false' among all parenthesized instances of A.B.C.......D iii) if false.E=true then val3=( 2^(K-2) - N ) = M ie. number of ways the expression with size K produces a false [ 2^(K-2) is the number of ways to parenthesize an expression of size K ]. iv) if false.E=false then val3 = 0 This is the basic idea i had in mind but when i checked for its solution http://people.csail.mit.edu/bdean/6.046/dp/dp_9.swf the approach there was completely different. Can someone tell me what am I doing wrong and how can i get better at solving DP so that I can come up with solutions like the one given above myself. Thanks in advance.

  Read the article

• Determining cause of random latency/loading issues

  - by Sherwin Flight

  I'm not sure exactly what details to post in regards to my issue, because I'm not sure what is relevant. Prior to the end of September my websites all loaded quickly, in almost all cases. Loading time wasn't usually more than a few seconds. However, since the end of September I noticed a big increase in page loading times. In some cases pages were taking 30 seconds or more to load. I do have a remote monitoring service monitoring some of the sites as well, and the image below shows the response times over the past month. The response times shown at the beginning of this graph were what the usual response times were prior to this issue occurring. You can see that there has been a significant increase in response times from the beginning to the end of this graph. The thing is, the problem is not happening 100% of the time. If I click through the site, or even just keep refreshing the page, about 25% of the time the pages load quickly, the remaining 75% of the time they load slowly. Sometimes the pages take so long to load that they time out, and don't load at all. I have contacted my hosting provider, and they said things at their end was fine. I don't believe the problem is my home internet provider, because all other websites load without a problem. The server is located in Texas, USA. This also raises another interesting point. My remote monitor checks my site from two locations, California, USA, and London, England. As you can see in the chart below the response time is actually shorter when checked from London, which doesn't seem to make sense, since the server is physically closer to the California monitoring location. I would have expected the London monitoring location to have higher response times since they are physically farther away. I should also point out that in some traceroute test I've done it seem like the first connection to the server seems to take the longest, then after that the rest of the page loads quickly. Below is a little chart showing the times for the first connection to the server. So, what could be causing this problem, and what steps can I take to resolve it or at least narrow down the problem? Sending the request to the server was very quick, and receiving the reply back seems pretty quick, but the WAIT time is really long. So it connects, sends the request, but then waits close to 30 seconds before it starts receiving data back. I am also aware that there are things I can do to speed up page loading times, like reducing the number of css/js files used on a page, compressing images, etc. This is not really what the source of the problem is though, because nothing has really changed on the site since before the problem started, and other sites on the same server are loading slowly as well. Any help or advice is much appreciated.

  Read the article

• High CPU load for 1:30 minutes when mounting ext4-raid partition

  - by sirion

  I have a raid 5 (software) with 5x2TB drives. I encrypted the raid with cryptsetup and put an ext4-partition on top. In the beginning opening and mounting the raid took less than 10 seconds, now (for a few weeks) mounting alone takes 1:30 minutes and the cpu stays around 93% the whole time: The output of "time sudo mount /dev/mapper/8000 /media/8000" is: real 1m31.952s user 0m0.008s sys 1m25.229s At the same time only one line is added to /var/log/syslog: kernel: [ 2240.921381] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null) My Ubuntu-version is "12.04.1 LTS" and no updates are pending. I checked the partition with fsck, but it says that all is ok. The "cryptsetup luksOpen" command only takes a few seconds. I also tried changing the raid-bitmap (as it was suggested in some forum) but it did not change the behaviour. sudo mdadm --grow /dev/md0 -b internal and sudo mdadm --grow /dev/md0 -b none I had the idea that it might be the hardware being slow, but a read test with "sudo hdparm -t /dev/md0" spit out values between 62 and 159 MB/sec: Timing buffered disk reads: 382 MB in 3.00 seconds = 127.14 MB/sec Timing buffered disk reads: 482 MB in 3.02 seconds = 159.62 MB/sec Timing buffered disk reads: 190 MB in 3.03 seconds = 62.65 MB/sec Timing buffered disk reads: 474 MB in 3.02 seconds = 157.12 MB/sec Although I think it is strange that the read rate jumps by more than 100% - could that mean something? The speed test when reading from the mapped (decrypted) device shows similar behavior, although it is of course much slower. "sudo hdparm -t /dev/mapper/8000": Timing buffered disk reads: 56 MB in 3.02 seconds = 18.54 MB/sec Timing buffered disk reads: 122 MB in 3.09 seconds = 39.43 MB/sec Timing buffered disk reads: 134 MB in 3.02 seconds = 44.35 MB/sec The output of a verbose mount "mount -vvv /dev/mapper/8000 /media/8000" does not help much: mount: fstab path: "/etc/fstab" mount: mtab path: "/etc/mtab" mount: lock path: "/etc/mtab~" mount: temp path: "/etc/mtab.tmp" mount: UID: 0 mount: eUID: 0 mount: spec: "/dev/mapper/8000" mount: node: "/media/8000" mount: types: "(null)" mount: opts: "(null)" mount: you didn't specify a filesystem type for /dev/mapper/8000 I will try type ext4 mount: mount(2) syscall: source: "/dev/mapper/8000", target: "/media/8000", filesystemtype: "ext4", mountflags: -1058209792, data: (null) Any idea where I could find additional information on why mounting takes so long, or what additional tests I could run?

  Read the article

• Ubuntu 13.XX unable to mount USB HDD. Tried everything. I/O error boot sector/file system

  - by XaviGG

  I know that there are many posts related but none of them helped me. I will jump to the last test because it is the one that should work, but it does not. An external HDD with single partition slow NTFS formatted in Windows, empty and clean. Checked for errors, it tells that not errors where found. Moving to Ubutnu 13.04... Gparted throws the first error when trying to read the disk: Input/output error It appears as unknown the content of the disk. Unable to create partition table or format it, getting the same error when trying. If I try to mount it in the terminal it tells me the same, specifying that also there is an I/O error reading the boot sector. I have this problem since I upgraded (always with fresh install) to 13.04. I thought it will be solved by the 13.10 but it has the same behavior. I tried with two different HDD (HD and SSHD) that work perfectly in Windows 7. In 13.04 at least I got a trying of mounting where the icon of the drive started showing and disappearing until finally it disappeared. But now it doesn't even try. Possible causes: -The HDD was my old main HDD, so it had WIN,RECOVERY,SYSTEM,UBU,SWAP partitions. Maybe the way or place where the partition table is defined is not the best for an external HDD but I don't know a lot in that topic. I would appreciate a lot if someone can give me a guideline to convert one of these HDD in a working external HDD. No files to recover, nothing to care about. Just format completely the disk and be able to use it for storing backups without having to move the files first to the windows partition, load windows and then copy them to the external HDD. Because I want to use a file comparator for the backups. Thanks a lot Edit 1: I found an option in Windows to convert it to a dynamic HDD that warns me that I wont be able to run O.S. after changing. I suppose that is what I need because in the current mode I cannot safely extract it. But it tells me an error that it couldn't change the mode.

  Read the article

• Why Java's JMF doesn't work in Linux?

  - by Visruth CV

  I got to do some image processing program in java using Linux. I chose to use the JMF for my camera (a webcam) access. But my program is not able to access the camera. But, the jmf works well in Windows. I downloaded jmf from oracle.com and I tried to install it in 'Ubuntu 10.10-the Maverick-released in October 2010 and supported until April 2012'. The downloaded file was a .bin file. I got the below output (last part of the output) when I tried the command provided by oracle /bin/sh ./jmf-2_1_1e-linux-i586.bin. For inquiries please contact: Sun Microsystems, Inc. 4150 Network Circle, Santa Clara, California 95054. LFI# 129621/Form ID#011801 Do you agree to the above license terms? [yes or no] yes Permit recording from an applet? (see readme.html) [yes or no] yes Permit writing local files from an applet? (recommend no, see readme.html) [yes or no] yes Unpacking... tail: cannot open `+309' for reading: No such file or directory Extracting... ./install.sfx.4140: 1: cannot open ==: No such file ./install.sfx.4140: 1: ==: not found ./install.sfx.4140: 3: Syntax error: ")" unexpected chmod: cannot access `JMF-2.1.1e/bin/jmstudio': No such file or directory chmod: cannot access `JMF-2.1.1e/bin/jmfregistry': No such file or directory chmod: cannot access `JMF-2.1.1e/bin/jmfinit': No such file or directory ./jmf-2_1_1e-linux-i586.bin: 305: JMF-2.1.1e/bin/jmfinit: not found /bin/cp: cannot stat `JMF-2.1.1e/lib/jmf.properties': No such file or directory Done. When try the same command again, getting nothing in the terminal (console). visruth@laptop:~/Desktop/mobileapps$ /bin/sh ./jmf-2_1_1e-linux-i586.bin visruth@laptop:~/Desktop/mobileapps$ Now, I'm not sure that whether it is properly installed or not.Whatever, I'm not getting camera access in my programme. I checked out the driver of the camera, it is available in the os itself I think because other softwares are able to access the camera (web cam). I tried it on both desktop and laptop, but no effect... Is there any solution for the problem?

  Read the article

• Wireless connection by using command screen

  - by Amadeus

  I installed Ubuntu 12.04 armhf to my beagleboard-xm and now trying to connect to a wireless network. First, I checked if I can search for available networks: ubuntu@arm:~$ iwlist scan lo Interface doesn't support scanning. usb0 Interface doesn't support scanning. wlan0 Scan completed : Cell 01 - Address: EA:7D:EF:60:C9:0B Channel:1 Frequency:2.412 GHz (Channel 1) Quality=70/70 Signal level=-23 dBm Encryption key:on ESSID:"ghostrider" Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 18 Mb/s 24 Mb/s; 36 Mb/s; 54 Mb/s Bit Rates:6 Mb/s; 9 Mb/s; 12 Mb/s; 48 Mb/s Mode:Ad-Hoc Extra:tsf=000000005a1ab50e Extra: Last beacon: 6242ms ago IE: Unknown: 000A67686F73747269646572 IE: Unknown: 010882848B962430486C IE: Unknown: 030101 IE: Unknown: 06020000 IE: Unknown: 2A0100 IE: Unknown: 2F0100 IE: Unknown: 32040C121860 IE: Unknown: 2D1A2C181BFF00000000000000000000000000000000000000000000 IE: Unknown: 3D16010800000000FF000000000000000000000000000000 IE: Unknown: DD09001018020000000000 Then I edited /etc/network/interfaces file to the following: root@arm:/etc/wpa_supplicant# cat /etc/network/interfaces auto lo iface lo inet loopback # The primary network interface auto eth0 iface eth0 inet dhcp # Example to keep MAC address between reboots #hwaddress ether DE:AD:BE:EF:CA:FE # WiFi Example auto wlan0 iface wlan0 inet dhcp wpa-ssid "ghostrider" wpa-psk "b34d373eb2fb836a43b0afffe783c7d0af694724506c9e77b06d1021302905bf" But I cannot still connect to the wireless network: root@arm:/etc/wpa_supplicant# iwconfig lo no wireless extensions. usb0 no wireless extensions. wlan0 IEEE 802.11bgn ESSID:off/any Mode:Managed Access Point: Not-Asociated Tx-Power=20 dBm Retry long limit:7 RTS thr:off Fragment thr:off Encryption key:off Power Management:on eth0 no wireless extensions. root@arm:/etc/network# ifup wlan0 Failed to bring up wlan0. What is wrong? Should I change any other files also? But I think it was enough. By the way if you are curious about where that wpa-psk came from: zero@ghostrider:~$ wpa_passphrase ghostrider 34bddf67c2 network={ ssid="ghostrider" #psk="34bddf67c2" psk=b34d373eb2fb836a43b0afffe783c7d0af694724506c9e77b06d1021302905bf } I will appreciate any effort to help. Regards, Amadeus ps: Also I tried to connect manually: root@arm:/etc/network# iwconfig wlan0 essid ghostrider key s:34bddf67c2 But this did not solve my problem also.

  Read the article

• core.* files eating up server space (~50MB)

  - by skytreader

  I'm renting server space from someone and, upon logging in my control panel after quite sometime, noticed an abnormal spike (~50MB) in the disk usage. Upon investigating, I found a lot of core.* files scattered around my public_html directory. Each one is more than 5MB in size but no more than 6MB. The * part is all numbers (in programming regex, that should be core\.\d+). I downloaded one and checked the contents. There was a lot of balderdash characters (NUL mostly, but also a scattering of ETB, ETX, STX) but there's this block of readable text which says: This text is part of the internal format of your mail folder, and is not a real message. It is created automatically by the mail system software. If deleted, important folder data will be lost, and it will be re-created with the data reset to initial values. Pretty self-explanatory. A few blocks above the text are some more readable messages that look like logs but is sandwiched in between non printable characters. I've extracted some below. Scan not valid for mh mailboxes Bogus character 0x%x in news state Can't rewrite news state %.80s Error closing backup news state %.80s No state for newsgroup %.80s found Now, a few concerns: Am I under attack? The messages seem to be about my webmail but I don't use my personal webmail that much---only for a vanity email address and an inbox for an outdated comments system. However, lately, I seem to notice a spike in the spam for my vanity mail. (Note: the comments system is covered by a captcha but every now and then some get through. My vanity email has a spam filter but it isn't as good as I'd like). Next, if this is a feature, can I turn it off? Is it advisable to? I've only 150MB so you see why I'm fretting over a 50MB spike. Some final details: my only server-side scripts are in PHP. The directory which accumulated the most number of these core files is the one containing the Wordpress-managed subdomain of my site. I manage my server through CPanel. Lastly, I decided to delete this files and after some checking nothing seems amiss in my websites nor in my mail. They are indeed the ones responsible for the ~50MB spike as my disk space usage is back to expected.

  Read the article

< Previous Page | 199 200 201 202 203 204 205 206 207 208 209 210  | Next Page >