Search Results

Search found 7447 results on 298 pages for 'estrategia hardware'.

Page 203/298 | < Previous Page | 199 200 201 202 203 204 205 206 207 208 209 210  | Next Page >

• Solaris 10: Identify a PID and the CPU it's running on

  - by Marcus

  I have multiple instances of a database running on a Solaris system. I'd like to prove that each database process is being handled by a different CPU. Essentially, I want to be able to do something like a ps -ef | grep <process_name> to get the PIDs and then run another command (if required) to identify the CPU... Is prstat able to do this? I'm making an assumption that as each database instance is started each one uses a different CPU. I'm not sure if I'm understanding this correctly... The reason I want to do this is because Sun hardware has slow CPU's, but lots of them. Therefore, to get the best performance out of it, I need to try and spread the load among CPU's... Thanks

  Read the article

• Can a RAID disk setup crash if only 1 hard disk fails?

  - by Steve Rodrigue

  I am a web developer. I have not much experience in hardware. For this reason, I use managed servers. This morning, one of the drives in our setup failed. However, the full site went down. I asked my web host what happened and he replied that the hard disk failed in such a way that the RAID controller couldn't work properly. Do you guys ever seen that before? Is it possible? Thanks for any help on this guys. I need to know if my web host is honest with me. Steve

  Read the article

• Is there a fix for an iMac G5 annoying screen pattern issue?

  - by smountcastle

  It's probably a hardware issue, but I was hoping that someone might know of other options to try. My iMac G5 (the revision just before the built-in iSight was introduced) has developed an annoying pattern of short/wide rectangles in a pinkish hue across the screen. I've followed Apple's instructions to ensure that the logic board hasn't failed (by resetting the SMU and watching the internal LEDs light-up). I suspect either the LCD or video card has failed. Below are two screen shots, one taken by my iPhone which exhibits the problem and a snapshot taking from the faulty iMac which looks fine.

  Read the article

• How to makesure VM is in Para virtualization mode on XEN?

  - by ananthan

  I am having a server running XEN,with ubuntu 12.04 as Domain 0. Intel VT is turned on by default and i dont want to run any Windows OS as VM. So 1. how can i makesure that all the created VM will be in paravirtualized mode even with VT enabled? I have heard that in Full Virtualization hypervisor needs to work hard for emulating all the underlying hardware,which may reduce performance for too much i/o specific applications when compared to para mode. 2.Since i am running only Linux VMs do i really need to enable VT support? 3.Can i be able to run Linux VM in para mode with VT enabled? 4.Will simply turning on VT support changes virtualization from para to full virtualization?? 5.Will there be any performance improvement for VM running Linux OS if VT is enabled?

  Read the article

• How to set up an extended desktop on dual monitors in Kubuntu 9.04?

  - by Dennis

  I'm using my laptop (Lenovo Thinkpad T60) and I have a secondary monitor (which has a different resolution than my laptop screen) connected by VGA. Kubuntu recognizes the monitor and it functions but my desktop is mirrored (i.e. an identical copy) across the dual monitors (which is useless to me). How can I extend my desktop across both monitors? P.S. I googled it but the solutions I found weren't standard, they were hardware specific and you had to manually change system files, etc.. There must be an easier way. edit: Here is a snapshot of the settings.

  Read the article

• Graphics card for dual 2560 x 1440 output

  - by Bender

  As the title suggests I want to power two 2560 x 1440 monitors from one graphics card. I am just about to send my second graphics card back to Amazon, so before I purchase a 3rd incorrect card I thought I should get some advice. My latest card has dual DL-DVI output but only supports 2560 x 1440 on one output, the other maxes out at 1920 x 1080. Can graphics cards with two Dual Link DVI adapters (or alternately, one Dual Link DVI and one DisplayPort support the a full 2560 x 1440 on both monitors, or does that depend on the graphics hardware and not only the connectors?

  Read the article

• High Availability Clustering and Virtualization

  - by tmcallaghan

  I'm trying to understand how the various virtualization vendors (specifically Amazon EC2, but also VMware and Xen) enable software vendors to provide a real HA solution in the environment where the servers are virtualized. Specifically, if I'm running any HA application (exchange, databases, etc) I need to ensure that my redundant virtual "servers" aren't located on the same physical server. Using in-house virtualization solutions (VMware, Xen, etc) I can provision accordingly as well as check the virtual - physical arrangement. I could, however, accidentally "vmotion" to the same physical hardware. With EC2, I don't even have the ability at provision time to select different physical servers. Since their Cluster Compute Instances are 1 virtual server per physical server it seems to be the only way to guarantee I don't have a false sense of redundancy. Any ideas or thoughts would be helpful. What are others doing about this problem? If the vendors provided an API where I could get something as simple as a unique physical system identifier I could at least know if I'm going to have an issue. -Tim

  Read the article

• Turning a running Linux system into a KVM instance on another machine

  - by Charles

  I have two physical machines that I wish to virtualize. I can not (physically) plug the hard drives from either machine into the new machine that will act as their VM host, so I think that copying the entire structure of the system over using dd is out of the question. How can I best go about migrating these machines from their hardware to the KVM environment? I've set up empty, unformatted LVM logical volumes to host their filesystems, with the understanding that giving the VMs a real partition to work with achieves higher performance than sticking an image on the filesystem. Would I be better off creating new OS installs and rsyncing the differences over? FWIW, the two machines to be VM'd are running CentOS 5, and the host machine is running Ubuntu Server 10.04 for no particularly important reason. I doubt this matters too much, as it's still going to be KVM and libvert that matter.

  Read the article

• How to effectively secure a dedicated server for intranet use?

  - by Mark

  I need to secure a dedicated server for intranet use, the server is managed so will have software based security, but what other security should be considered for enterprise level security? The intranet is a host for an ECM (Alfresco) managing and storing sensitive documents. As the information is sensitive we are trying to make it as secure as reasonably possible (requirement in UK law). We plan to encrypt the data on the database. It will be connected to via SSL encryption. Should we consider Hardware firewall, Private lan between the application server and database server?

  Read the article

• how to design LAN connectivity between private and corporate ?

  - by maruti

  there is a bunch of servers connected to shared storage in a private LAN (10.x.x.x). this privateLAN is managed by a windows server (DHCP, DNS and directory services). how can these hosts be accessed from outside of this privateLAN? Eg. Remote desktop. can the NIC2 on each of the hosts be connected to the other public LAN (compromising speed or security? what are improtant considerations: additional hardware? like switches? routing&DNS software?

  Read the article

• Does RAID negatively affect non-RAID devices?

  - by Django Reinhardt

  I am running Windows 8 on an SSD, and it's all running swimmingly, but I want to store documents on two HHDs (not SDDs) running under RAID 1. My motherboard has two SATA controllers, both set to AHCI. On the 3GB/s controller, all four ports are used (1 Bluray Optical Drive, 1 Spare HD, and the 2 I wish to turn into a RAID 1 drive). Windows is on the 6GB/s controller. Like so: So my question is: If I turn these four ports (on the 3GB/s controller) into a RAID controller, will that negatively affect the non-RAID hardware plugged into it? I.e. Will the HDD or Bluray drive be slower/incompatible with being plugged into a non-AHCI controller? Thanks.

  Read the article

• What kind of website traffic can a 10mpbs connection handle?

  - by Blankman

  I need some help understanding firewalls. I played around with Amazon EC2 and it seems to provide a firewall out-of-the-box. When I say firewall, to me that means the ability to block ports from being accessed from the outside world, or to only specific security groups. I'm looking at a dedicated server hosting provider and they provide a hardware firewall for $50/month and it is limited to 10mbps. Can someone explain to me what kind of traffic this correlates to? Are these usually limited to the number of simultaneous connections also?

  Read the article

• BSOD / Reboot Cycling (possibly after windows update?)

  - by Mikey.B

  Windows XP SP3 Hi Guys, My desktop PC rebooted during the night (presumably due to an automated Windows update) and was stuck on a file system check. I forced a reboot as it had been stuck for hours and now the system won't finish booting. It shows the Windows XP splash screen, briefly flickers what looks to be a BSOD, and then reboots. So far, I've tried: Booting into all variations of safe mode (just hangs) Setting BIOS settings to fail-safe defaults (still reboots) Choosing the start-up option to load last known good configuration (still reboots) Any suggestions on how to proceed here? I haven't installed any recent software or hardware so I don't think this is a result of any explicit change I've made. -M

  Read the article

• Running VMWare EXS(i) on Apple Xserve

  - by xzyfer

  So we're running VMWare Esx(i) (I'm not completely sure which as I'm out of the office) running on Windows Server 2008. However it turns out the machine we're running it on has serious hardware limitations, most importantly it's restricted to 4gb of ram. We've since inherited a much more powerful server. The problem being the new server is an Apple Xserver running, I believe, Snow Leopard Server. My question is, can I run VMWare Exs(i) on Xserver, or an equivalent? I'm done some hardcore Googling and the best that I can find is that it's not supported, but it might work, but there are no guarantees (this has been stated many times on the VMWare forums by the VMWare support staff). But all these search results are years old, so I can't find any recent answers regarding this. Has anyone accomplished this?

  Read the article

• Which particular file caused "Delayed write failed" error?

  - by user35020

  I sometimes get this error when resuming from hibernation: Delayed Write Failed: Windows was unable to save all the data for the file G:\$Mft. The data has been lost. This error may be caused by a failure of your computer hardware or network connection. Please try to save this file elsewhere. I know this is caused because the hard drive (G:, an external USB drive) was (a) plugged in when I hibernated and wasn't ready at wake-up, or (b) I simply forgot to plug it when resuming from hibernation. My question is: is there any way to see which particular file/folder/etc failed to be written? The hard drive functions correctly before and after, so there seems to be no permanent damage. Is there a detailed log someplace or a utility? I've searched but found nothing. Thanks for any help!

  Read the article

• Error sysprepping Windows 8 Enterprise 90-day trial

  - by Philip

  I am using the Windows 8 Enterprise 90-day trial to evaluate the latest version of Windows for a private school. The way I work is that I use sysprep to prepare an generalized image, then I clone it to the school's computers. When I follow the instructions and try sysprep on my installation of Windows 8 in VirtualBox, sysprep thinks briefly and gives me an error message: Fatal error occurred while trying to sysprep the machine. Once I acknowledge it, sysprep closes. I checked the Windows Event Log, and there's nothing there that I could see. I also followed some instructions to cure this problem, but nothing changed. The error remains. My best guess is that the 90-day trial prohibits the use of sysprep, but I can't be sure. It might also be my use of VirtualBox, or who-knows-what. Has anyone had success with this, or encountered the same issue on real hardware?

  Read the article

• 2 identical PCs - can I swap a single hard drive between and expect Windows 7/XP to work?

  - by rgvcorley

  I currently work in 2 different locations, traveling between the 2 every few weeks or so. I currently have screens, kb, mouse etc... in both locations, so I just pick up my tower case when I want to move to the other location. However to make moving easier I was thinking of buying 2 tower cases with hot swappable drive bays on the front and installing identical hardware in each one. This would allow me to pull the drives out and just take them with me and plug them into the PC at the other location. Would windows 7 complain? I'm not fussed about buying licenses for both PCs, but would I have any problems with drivers due to the different serial numbers of the components?

  Read the article

• How can I create a bootable CD-ROM/USB Drive? (With NTFS + USB Drive support)

  - by RonK

  My motherboard got fried and I was forced to get a new hardware set (MB+CPU+RAM) so in most likelyhood I'll need to reinstall my Windows 7. I usually follow procedure and put the OS on the primary partition and my data on a logical partition - so I can format the primary without concern - but this time I made a mistakte and left some crucial items on the primary partition. I want to create a bootable CD-ROM/USB Drive which can read NTFS so I can access this data. If booting via a CD-ROM, I would prefer being able to connect a disk-on-key/My Passport to the computer and be able to access it to transfer the data to it. How can I do it? (free 3rd party applications are most welcome)

  Read the article

• What is a good topic for a research paper on modern computer architecture?

  - by Max Schmeling

  This may not be the right place for this, but I wanted to get this question in front of some of the brightest people on the internet, so I thought I'd give it a shot. I have to write a research paper on some modern aspect of computer architecture. The subject is really not very restrictive; pretty much any recent development in computer hardware will work. I want to write it over something really interesting, but I don't have a lot of good ideas. What would make a really interesting paper?

  Read the article

• Extract X11 configuration information from running instance.

  - by kasterma

  Since I had a hard disk die on me, I figured I could easily try some other OS (I usually run Ubuntu). Turns out that Ubuntu flawlessly recognizes my video card and monitor (X11 works right out of the box), and none of the other systems I tried gets anything working (I tried CentOS and FreeBSD). In my now working version of Ubuntu I cannot find a configuration file with information I could try to use with one of the other versions, which makes me guess that it just detects the hardware every time. Can I extract its choice for drivers and configuration options somehow (so I can try these same options in the other systems)?

  Read the article

• PC reboots instead of shutting down, no software problem. What could be the cause?

  - by DaVinci

  Hi, first of all: I'm not sure if superuser is the right site for my question and google didn't help. I have a pc here that prefers rebooting to shuting down. Everytime I try to shut the pc down it reboots, however it is possible to turn the pc off by pressing the power button. The problem is not windows-specific, the Ubuntu LiveCD does exactly the same that's why I said that it is no software problem. I checked wake on LAN, it is disabled and I also resetted the BIOS settings to factory default. That might not mean that it can't be a BIOS problem but I don't know what else to try here. I did not check any hardware yet but nothing exploded so far. I don't know what could have caused this behaviour as it is not my PC. The Mainboard is a ASUS P5Q-E P45.

  Read the article

• Is it possible to host a website with Apache HTTP through a ZyXEL EQ-660R modem and a Netgear WGT624v3 wireless router?

  - by Vortico

  Essentially, I have a spare desktop computer I'd like to turn into a web server, but my modem and wireless router are very difficult to work with. I installed Apache HTTP and successfully hosted a test page which can be accessed anywhere on the LAN. However, I'm having trouble setting up the server to be accessed from my external IP address. I was supplied with a ZyXEL EQ-660R DSL modem by my ISP (CenturyLink) and bought a Netgear WGT624v3 wireless router in which to connect my laptop and spare desktop. ZyXEL's website is no help, and I don't think much of the problem is with the Netgear router. I've played with many settings and have tried to forward port 80 from the modem, but I've had no luck. Could someone direct me toward a solution or recommendations for more promising hardware? Or should I admit defeat and explore other hobbies? :)

  Read the article

• Origin of display connector numbers in XServer (e.g. HDMI1, HDMI2, DP1)

  - by Andreas N

  a custom mainboard has a DVI and a DisplayPort connector on the board. Currently, everything that is connected at DVI will be named "HDMI2" in XServer. I can see that by calling the "xrandr" tool (in Ubuntu Trusty Tahr). A display connected to the DP connector will be named "DP1" or "HDMI1", if I use a DP-to-DVI adapter. We are now testing a slightly upgraded board version, which has a newer CPU (Intel J1800, Baytrail) among other things and the position of the DVI and DP connectors are switched. Also, everything at the DVI port is called "HDMI1" and something connected to the DP port gets "DP2" or "HDMI2". Q: What causes these numbers to be produced in this manner and where (probably in the kernel) is it happening? I suspect the cause to be hardware related. Specifically, at which CPU pins the connector pins are routed and attached to. Q: Would it be possible to influence this numbering scheme in order to retain the previous numbering behaviour?

  Read the article

• Looking for a product configurator

  - by Netsrac

  I am looking for a product configurator for products with high complexity. The main goal is to allow a sales person to configure the product in a correct and working manner. The product is a combination of hard- and software options. The options for sure have dependecies (so option A needs B and C) and can also exclude each other. The performance requirements of the software related to the hardware need to be considered. So some rules need to be defineable. Does anybody know a tool (preferred open source) doing that job? Thanks for your help.

  Read the article

• Moving an "all-in-one" PC when turned on/off

  - by Purak

  I have an "all-in-one" pc. I know that moving a pc when it is switched on is harmful to the hardware components. What I would like to know is if the same applies to "all-in-one" pc's and if the same applies to regularly moving it from one side of the room to the other when it is turned off! The reason for the question is that I work on one desk during the day, and in the evening move it to the couch so I can do other stuff while watching TV or something. I always turn it off before the move, but somebody told me that I can be damaging the machine by doing so. Can anybody shed some light on this? Many thanks

  Read the article

< Previous Page | 199 200 201 202 203 204 205 206 207 208 209 210  | Next Page >