Search Results

Search found 19385 results on 776 pages for 'canonical link'.

Page 204/776 | < Previous Page | 200 201 202 203 204 205 206 207 208 209 210 211  | Next Page >

• Botting from a stick drive

  - by Zap

  Am trying to boot from a usb stick. Have carefully followed the instructions at the following link and successfully downloaded and installed version Ubuntu 12.04 desk top: http://www.ubuntu.com/download/help/create-a-usb-stick-on-windows I used the Universal-USB-Installer-1.9.0.2 as instructed and choose the "Ubuntu 12.04 desk top" option, after downloading the respective iso/zip file onto my Dell laptop from the Ubuntu site. Also modified my bios to select the usb first as boot drive instead of hard drive. Also, turned off bit blocker on my laptop and usb stick. Usb stick has the setting of "Automatically unlock this drive on this computer". When i reboot my laptop, it first boots into a black screen (i assume is the bios), but prompts saying "Remove disks or other media. Press any key to start". I press any key and regardless the laptop boots up to windows. Hence, it appears that the boot process is checking the USB first before going to the hard drive to look for it's boot disk and starting Windows 7. Is it that the USB stick is not correctly configured with Ubuntu as a boot disk? Is there anything else that i need to do besides the instructions at the following link? http://www.ubuntu.com/download/help/create-a-usb-stick-on-windows How can I ensure that USB boot stick is configured correctly? After running the Universal-USB-Installer-1.9.0.2 to "install" Ubuntu, is there additional configuration/installation steps? What is the first file that the bios would look for on this USB drive? Is this configured somewhere in the bios, or would it just look for an grub file or /boot dir? The only message i get when booting is "Remove disks or other media. Press any key to start". Any and all help would be much appreciated.. Thanks ... :)

  Read the article

• Chrome drag and drop download links

  - by Brad

  In Chrome, I used to be able to take a link to a file and just drag to a folder on my system. Chrome would then download whatever resource was at the URL for the link and put it into the folder dropped into. This was particularly handy when using Gmail. If there was an attachment, I could just click and drag it into a folder, and Chrome would download it for me to the correct place. Now I have to hit download, and then drag from the download bar when it is finished. Has this feature been removed? Is there any way to bring it back?

  Read the article

• How to tell if OpenGL is really working in Ubuntu 10.04

  - by Jonathan

  I have a lenovo S9e running Intel integrated graphics. Here is my lspci output related to the graphics: 00:02.1 Display controller: Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller (rev 03) Subsystem: Lenovo Device 3870 Flags: bus master, fast devsel, latency 0 Memory at f0580000 (32-bit, non-prefetchable) [size=512K] Capabilities: [d0] Power Management version 2 I want to know how I can make sure OpenGL support is running in full on an Ubuntu 10.04 installation. I have a few hints to think that it is not: The "Desktop Effects" will not load Apps such as stardock, when attempting to use OpenGL rendering, will display black boxes instead of transparency In the games Pioneers, the number-tile icons are suspiciously just black circles Windows games running with Wine will only support software rendering, not hardware rendering When I boot into a Knoppix LiveCD, the desktop effects do work, splendidly, meaning compiz detects my computer as capable. My problem with troubleshooting is that Canonical has basically eliminated the conf-file-based mechanism of X11 as far as I can tell, thus making it even harder to ensure graphics modules are loading properly. How do I debug and test OpenGL on m Ubuntu 10.04 installation?

  Read the article

• Can't get my Raspberry Pi to keep a static IP

  - by JonnyIrving

  I recently got given a Raspberry Pi and I would like to be able to remote into it using puTTy from my laptop so I don't have to sit next to my tv with a keyboard and mouse to use it. I am able to get a puTTy session going when I know the IP address that my router has given the Pi on each session but it keeps changing on each reboot as I would expect. So I followed a number if instruction to go about configuring the RPi to keep a static IP address. This involved changing the file at '/etc/netwrok/interfaces' which now contains (password removed): auto lo iface lo inet loopback iface eth0 inet static address 192.168.1.82 netmask 255.255.255.0 gateway 192.168.1.254 auto wlan0 allow-hotplug wlan0 iface wlan0 inet dhcp wpa-ssid "BeBoxD304BF" wpa-psk "**********" Despite this however, each time I reboot my RPi it gives me a new dynamic IP address still. I also noticed that in the 'ifconfig' output below that the details of the eth0 doesn't contain IP details for inet addr, Bcast or Mask which have been present in all other examples I have seen online. eth0 Link encap:Ethernet HWaddr b8:27:eb:b5:95:da UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) wlan0 Link encap:Ethernet HWaddr 00:87:c6:00:33:77 inet addr:192.168.1.83 Bcast:192.168.1.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:918 errors:0 dropped:0 overruns:0 frame:0 TX packets:277 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 Also I'm not sure if this is relevant but it can't hurt! The file at '/etc/resolv.conf' contains: domain config search config nameserver 192.168.1.254 ..I heard it might mean something on one of the pages I was looking at. I would be very grateful for any help with this. I have tried everything I can think of and would really like to get this working this weekend so I can use it from work.

  Read the article

• Use a custom domain and point to Tumblr blog

  - by jskye

  My domain mydomain.com is registered with GoDaddy. I wish to host my Tumblr blog on this domain with Nearly Free Speech hosting. My active nameservers at GoDaddy already point to my authoritative ones at Nearly Free Speech which is working. However I'm baffled as to how to get my correct configuration to point to my Tumblr. Preferably I'd like (A) my domain http://mydomain.com to host the blog and have http://www.mydomain.com redirect also to http://mydomain.com. If this is too difficult my next preference is (B) to have http://www.mydomain.com host the blog whilst http://mydomain.com redirects to http://www.mydomain.com My third preference is to have (C) a sub-domain like http://tumblr.mydomain.com or http://tumblr.mydomain.com to host the blog and I guess have http://mydomain.com and http://www.mydomain.com both redirect to it. I've tried having two aliases mydomain.com and www.mydomain.com pointing to my permanent Nearly Free Speech IP at mydomain.nfshost.com and when I try to add: (1) an A record pointing mydomain.com to the IP 66.6.44.4 as per Tumblr's instructions it tells me I already have the bare domain as an alias so I cant do that. (2) the A record on the www.mydomain.com alias. I can do this with either www.mydomain.com set as an alias or not. But when I tried this with mydomain.com set as the canonical name the result when visiting either mydomain.com or www.mydomain.com was both of them continually redirecting to each other until an error was thrown. So I was wondering if there is a ninja that could save me some hair-pulling and tell me the correct way to config A, or else B, or else C.

  Read the article

• wireless is disabled by hardware lenovo 3000g430

  - by sudheer

  sir i have problem with my wifi switch sir please tell me solution for my problem (wifi is disabled by hardware). output of sudo lshw -C network is sudo] password for sudheer: *-network DISABLED description: Wireless interface product: BCM4312 802.11b/g LP-PHY vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:06:00.0 logical name: eth2 version: 01 serial: 00:21:00:72:3a:93 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=wl0 driverversion=5.100.82.38 latency=0 multicast=yes wireless=IEEE 802.11bg resources: irq:19 memory:f4700000-f4703fff *-network description: Ethernet interface product: NetLink BCM5906M Fast Ethernet PCI Express vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:07:00.0 logical name: eth0 version: 02 serial: 00:1e:68:ad:24:0b size: 100Mbit/s capacity: 100Mbit/s width: 64 bits clock: 33MHz capabilities: pm vpd msi pciexpress bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=tg3 driverversion=3.121 duplex=full firmware=sb v3.04 ip=172.16.52.79 latency=0 link=yes multicast=yes port=twisted pair speed=100Mbit/s resources: irq:47 memory:f4600000-f460ffff output of iwconfig is lo no wireless extensions. eth2 IEEE 802.11 Access Point: Not-Associated Link Quality:5 Signal level:0 Noise level:0 Rx invalid nwid:0 invalid crypt:0 invalid misc:0 eth0 no wireless extensions. sudheer@sudheer:~$ sudo iwlistscanning sudo: iwlistscanning: command not found ***sudheer@sudheer:~$ sudo iwlist scanning*** lo Interface doesn't support scanning. eth2 Failed to read scan data : Invalid argument eth0 Interface doesn't support scanning.

  Read the article

• Router which can modify TTL

  - by TheMouse

  My ISP has set up the TTL to 1. My current router Linksys WRT120N can't change this and my computers don't have connection to Internet. I will return my current router and take another. I have some options: D-Link DIR-615 D-Link DIR-320 Linksys WRT54G2 Linksys WRT54GL Is the last router the only fix (among these routers) to my problem? ( I have to buy the router from this shop: http://laptop.bg/#/accessories/routers/ .. the site is in Bulgarian but at least the models which I can choose from are there in English.)

  Read the article

• SEO title tag and earning a high rank on search engines [closed]

  - by Josh White

  Possible Duplicate: What are the best ways to increase your site's position in Google? One of the most basic SEO techiniques is including accurate description below 64 characters in the tags of each page. I was wondering if is considered ethical SEO to set up the contents based on a search keyword for example. So if the user searches for 'apples pictures' for example, then the title of the webpage would be 'apple pictures'. Note that the search keywords accurately describe my website contents because the title will always relate to the body of the webpage and 85-90% of the terms searched for will return corresponding results. Is this considered a good seo practice and is it ethical? Also, can someone explain what the idea is behind "linking"? I read somewhere that it is a good seo practice to link other websites and it is good when other websites link you. Does this mean that I should include as many links to other websites as possible (that are somehow relevant to my websites goal), also if I joined forums/services and posted my website url in the signature, would that still be considered other websites linking me?

  Read the article

• Need Boxee/Vista remote control recommendations

  - by gurun8

  I have an Acer Aspire X1200 (specs link below) desktop computer that I've installed Boxee on and it works great. And it looks like it's going to be a perfect computer for a media player. It's small with lots of hard drive space and even has a HDMI output on it. http://support.acer.com/acerpanam/desktop/0000/Acer/AspireX1200/AspireX1200sp2.shtml I also have a Harmony® 880 Advanced Universal Remote (specs link below) that I'd like to use with the Acer computer. www.logitech.com/en-us/440/372 My thought is that I need to get a USB remote control adapter, right? So I did a quick Google search and found products from $5 to hundreds of $$$. Does anyone have recommendations? Things you like/dislike about certain remotes? This Acer is running Vista and has a AMD LIVE!: Athlon X2 dual-core processor. 64 bit some times makes it a little more difficult. Thanks for the help.

  Read the article

• 13.10 doesn't boot on Vaio Pro 13

  - by vaioonbuntu

  I just installed Ubuntu 13.10 on my new Vaio Pro 13, disabled safe mode, but used UEFI and not legacy mode. I did an encrypted LVM installation and erased the complete SSD. It booted just fine from USB, but after installation it doesn't boot. The Vaio failed boot screen appears. I then tried this advice here: 13.10 on vaio pro with UEFI sadly it fails for me with "/usr/sbin/grub-probe: error: failed to get canonical path of /cow." I then tried mounted the encrypted partition with Nautilus and tried this: Cannot update grub with paramters on live USB With /dev/sda2 and then to install GRUB to /dev/sda. Didn't succeed and warned me that the "GPT partition label contains no BIOS Boot Partition; embedding won't be possible" What do i have to do, go fix GRUB and be able to boot my finished install? Here's my Boot Repair Log: http://paste.ubuntu.com/6386598/ I would really appreciate any help, I'm so happy to finally be able to ditch my big fat Macbook Pro and use Ubuntu on my new, light Vaio Pro, if only I could fix GRUB. best, x

  Read the article

• How to suppress or disable the shutdown option from indicator menu or shutdown dialog?

  - by user73093

  My goal is to allow user only to restart the system, and deny any shutdown (suspend, hibernate). I am running unity-2d. I 've managed to deny suspend and hibernate with polkit policy files like explained in How to disable shutdown/reboot/suspend/hibernate? I observed that is has somehow disable shutdown abilities, but hasn't removed "shutdown" entry from the indicator panel menu neither as well as the "shutdown..." button from the shutdown dialog. Pressing shutdown button at this point restarts lightdm, returning to the login screen. My goal is to remove any "shutdown" action and button. So, I 've added an ovveride file in /usr/share/glib-2.0/schemas that contains some rules: [com.canonical.indicator.session] suppress-shutdown-menuitem = true (all suppress-*-menuitem has "false" value by default in the schema) Compiling, restarting X, now there is an entry "close session..." in the indicator panel menu...: it's not what I want. at this point, if I set another entry suppress-logout-menuitem to true I got no entry in the indicator panel menu. Trying like this all combination doesn't give the opportunity to remove "shutdown" references/buttons without removing restart option. All I want is to remove any reference to "shutdown" but keep a "restart" option somewhere in the indicator menu... Thanks !

  Read the article

• Changing Text in Visio Org Chart Shape Changes Multiple Shapes' Text

  - by Eric

  I have inherited an organizational chart that was created in Visio 2003. I am updating it with Visio 2007. When changing the text in one shape, such as a person's title, multiple shapes nearby change their text to the same. For example, if I change Bob's title from Programmer to Programmer/DBA then Wendy's text will change to "Bob - Programmer/DBA". Some changes update three or four other boxes. Some changes will only update one box. My thought is the originator copied or duplicated the one box to create multiple boxes and it created some type of link between them. How do I remove this link? Thanks!

  Read the article

• Dell inspiron not finding Vodafone router

  - by Jeggy

  I have a "Dell inspiron 1564" and ubuntu doesn't find my friends router it works great at home, he has a vodafone router jeggy@jeggy-XPS:~$ sudo lshw -C network *-network description: Wireless interface product: BCM4312 802.11b/g LP-PHY vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:04:00.0 logical name: eth1 version: 01 serial: 78:e4:00:2a:d1:eb width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=wl0 driverversion=5.100.82.38 latency=0 multicast=yes wireless=IEEE 802.11bg resources: irq:17 memory:f0200000-f0203fff *-network description: Ethernet interface product: RTL8101E/RTL8102E PCI Express Fast Ethernet controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:05:00.0 logical name: eth0 version: 02 serial: b8:ac:6f:67:32:52 size: 10Mbit/s capacity: 100Mbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress msix vpd bus_master cap_list rom ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=half firmware=N/A latency=0 link=no multicast=yes port=MII speed=10Mbit/s resources: irq:42 ioport:3000(size=256) memory:f0410000-f0410fff memory:f0400000-f040ffff memory:f0420000-f043ffff *-network description: Ethernet interface physical id: 4 logical name: ham0 serial: 7a:79:05:ff:3e:ec size: 10Mbit/s capabilities: ethernet physical configuration: autonegotiation=off broadcast=yes driver=tun driverversion=1.6 duplex=full firmware=N/A ip=5.255.62.236 link=yes multicast=yes port=twisted pair speed=10Mbit/s

  Read the article

• How do I directly add/pin web page to Google Chrome jump list?

  - by irrational John

  Sometimes I want to (easily) add the link for a web page I'm viewing with Google Chrome to Chome's Windows 7 jump list. Is there a way to do this? I have tried dragging the bookmark/star to the left of the URL in the address bar onto Chrome's jump list, but this doesn't seem to "take". The only way I have found that works is rather kludgey. If I close the tab for the page I want to add then it shows up in the jump list under "Recently Closed". I can then pin the link to the jump list. It would be nice to have a way to add a web page to the jump list without first having to close it.

  Read the article

• BCM2046B1 Bluetooth Dongle connection problem

  - by Andfoy

  Well i have a Blueooth dongle with an BCM2046 IC intrregated, my problem is that when i connect it, Ubuntu recognize it, but it don't work whe i try to scan or scan the PC from other device, i replaced the default Gnome Bluetooth manager and i installed Blueman, but the problem presists. The Bluetooth LED indicator appears to be "working". I'm using 11.10 Oneiric Ocelot hcitool dev: Devices: hci0 89:21:XX:XX:XX:XX lsusb: Bus 002 Device 003: ID 0a5c:4500 Broadcom Corp. BCM2046B1 USB 2.0 Hub (part of BCM2046 Bluetooth) Bus 002 Device 004: ID 0a5c:2100 Broadcom Corp. Bluetooth 2.0+eDR dongle hciconfig -a: hci0: Type: BR/EDR Bus: USB BD Address: 89:21:XX:XX:XX:XX ACL MTU: 1017:8 SCO MTU: 64:0 UP RUNNING PSCAN ISCAN RX bytes:1329 acl:0 sco:0 events:40 errors:0 TX bytes:671 acl:0 sco:0 commands:35 errors:0 Features: 0xff 0xff 0x8d 0xfe 0x9b 0xf9 0x00 0x80 Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3 Link policy: RSWITCH HOLD SNIFF PARK Link mode: SLAVE ACCEPT Name: 'ubuntu-0' Class: 0x4a0100 Service Classes: Networking, Capturing, Telephony Device Class: Computer, Uncategorized HCI Version: 2.0 (0x3) Revision: 0x4000 LMP Version: 2.0 (0x3) Subversion: 0x430e Manufacturer: Broadcom Corporation (15) Sorry for my English and thanks for any hints.

  Read the article

• Why are my Google and Bing search result pages locking up?

  - by Cyberherbalist

  I've got some really weird behavior going on. I can't do any web searching using Google or Bing because when the search result page shows up, every single link on the page is completely unresponsive. That is, every link to a search result. The links to page functions other than search results work fine. This happens in both IE9 and FF13. It doesn't happen to Yahoo! results, though. Any ideas?

  Read the article

• WMV file won't play in Windows Media Player

  - by user1053768

  I have a .wmv file I uploaded to my website. When I click the link to the video, the video plays in Windows Media Player without any problems. However, on some systems when the user clicks the link, Windows Media Player gives them the error: Window Media Player cannot play the file. The player might not support the file type or might not support the codec that was used to compress the file All I did was copy the video to the server and store the URL in a database. Why are users getting this error? How can I fix it?

  Read the article

• How to implement a no-login authentication system

  - by mrwooster

  I am looking to build a very loose authentication system that can track a user and link submitted data/comments to a specific user. The submissions are essentially anonymous, but a user may want to edit his submission/comment at a later date. I want the experience to be as smooth as possible so do not want to ask users to sign up for an account and then login each time. There is no point as their submissions are not in their name and to another user browsing the site, there is no way of linking a submission to a specific user (think anonymous comments on a blog post or pastie). However, the user should have the ability to edit (at least in the short term) the content they have posted. The way I imagine doing this would be to place a unique identifier in a cookie on the users machine. This would enable me to link a submission to a user, and while that cookie remained on the users machine, I would allow them to edit their content. Of course, if the cookie is lost, or the user accesses the site from a different browser, then they would not be able to edit their content, but this is not really an issue, they can always resubmit a new piece of content. Is there a better way of doing this? How can I implement this so that the user can edit their data for the longest possible amount of time.

  Read the article

• Retrofit WebForms with ASP.NET MVC - NoVa Code Camp 2010.2 Demo

  - by Soe Tun

  Thank you to everyone who attended my Retrofit WebForms with ASP.NET MVC session at NoVa Code 2010.2. It was a fun event for me and I hope you had a great time and learned something from it. I wish I had more time to go over some more important topics in more detail. I *promise* I will be writing blog post series about it since I'll have some vacation time during the December holidays to cover some topics that I didn't get to cover in detail.   Please note that the ".bak" file included in the zip file is a SQL Server Database backup file. You have to restore it on your Database server to run it with the source code demo.   Please feel free to ask me about the demo project through Twitter or from this blog post. I'll be glad to help you out. If you want me to give this presentation at your .NET User Group, please let me know and I'll be honored to speak there also.   Again, thank you all and have a great holiday season. Here is the download link to my Demo project Zip file with the PowerPoint presentation in it. Please let me know if the link doesn't work.

  Read the article

• Mikrotik queues and limiting total upstream bandwidth

  - by g18c

  With a Mikrotik router (form of embedded Linux) I have created simple queues per machine matched by source IP address. Each of the 4 machine queues has an unlimited burst 3Mbps/3Mbps for Tx/Rx. During speedtest.net on all 4 machines at the same time, each machine shows 3Mbps (and is limited correctly there), however the total bandwidth on the uplink goes to 12Mbps (i need to set this to 10Mbps max for the upstream). I want to restrict the actual traffic passing across the uplink port to 10Mbps regardless of what the other queues are doing (I need this catch all queue to have the final say on the uplink speed). For example I need: Scenario A Machine A transferring @ 3Mbps Machine B transferring @ 3Mbps Machine C transferring @ 3Mbps Machine D transferring @ 0Mbps Up-link speed = 9Mbps Scenario B Machine A trying to transfer @ 3Mbps Machine B trying to transfer @ 3Mbps Machine C trying to transfer @ 3Mbps Machine D trying to transfer @ 3Mbps Up-link speed = 10Mbps Actual transfer speed of machine A,B,C,D = 2.5Mbps This is to allow slight over subscription of bandwidth queues as not all will be transmitting at 3Mbps all the time. Is this possible and if so how would one go about doing this?

  Read the article

• Nvidia Drivers on Debian / Lenny (Stable) -> Installation successful -> Monitors gets black

  - by David

  I have successfully installed the proprietary drivers for my nvidia (geforce 7300 gt) graphics card on debian/lenny. I know its not the best way to chose for driver installation ( see this link: http://wiki.debian.org/NvidiaGraphicsDrivers#non-freedrivers ). but the two ways seem to be possible for me (nvidia-kernel module compilation). Now the problem is that the monitors gets black, the power light starts blinking after i launch the x-server. Have a short look a the logs (output truncated from /var/log/Xorg.0.log): (II) Setting vga for screen 0. (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32 (==) NVIDIA(0): RGB weight 888 (==) NVIDIA(0): Default visual is TrueColor (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0) (**) Jul 28 17:10:11 NVIDIA(0): Enabling RENDER acceleration (II) Jul 28 17:10:11 NVIDIA(0): Support for GLX with the Damage and Composite X extensions is (II) Jul 28 17:10:11 NVIDIA(0): enabled. (II) Jul 28 17:10:11 NVIDIA(0): NVIDIA GPU GeForce 7300 GT (G73) at PCI:1:0:0 (GPU-0) (--) Jul 28 17:10:11 NVIDIA(0): Memory: 262144 kBytes (--) Jul 28 17:10:11 NVIDIA(0): VideoBIOS: 05.73.22.25.00 (II) Jul 28 17:10:11 NVIDIA(0): Detected PCI Express Link width: 16X (--) Jul 28 17:10:11 NVIDIA(0): Interlaced video modes are supported on this GPU (--) Jul 28 17:10:11 NVIDIA(0): Connected display device(s) on GeForce 7300 GT at PCI:1:0:0: (--) Jul 28 17:10:11 NVIDIA(0): Samsung SyncMaster (CRT-0) (--) Jul 28 17:10:11 NVIDIA(0): Samsung SyncMaster (DFP-0) (--) Jul 28 17:10:11 NVIDIA(0): Samsung SyncMaster (CRT-0): 400.0 MHz maximum pixel clock (--) Jul 28 17:10:11 NVIDIA(0): Samsung SyncMaster (DFP-0): 165.0 MHz maximum pixel clock (--) Jul 28 17:10:11 NVIDIA(0): Samsung SyncMaster (DFP-0): Internal Single Link TMDS (II) Jul 28 17:10:11 NVIDIA(0): Assigned Display Device: CRT-0 (==) Jul 28 17:10:11 NVIDIA(0): (==) Jul 28 17:10:11 NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select" (==) Jul 28 17:10:11 NVIDIA(0): will be used as the requested mode. (==) Jul 28 17:10:11 NVIDIA(0): (II) Jul 28 17:10:11 NVIDIA(0): Validated modes: (II) Jul 28 17:10:11 NVIDIA(0): "nvidia-auto-select" (II) Jul 28 17:10:11 NVIDIA(0): Virtual screen size determined to be 1280 x 1024 (--) Jul 28 17:10:11 NVIDIA(0): DPI set to (85, 86); computed from "UseEdidDpi" X config (--) Jul 28 17:10:11 NVIDIA(0): option (==) Jul 28 17:10:11 NVIDIA(0): Enabling 32-bit ARGB GLX visuals. (--) Depth 24 pixmap format is 32 bpp Here is the complete /etc/X11/xorg.conf file as generated by nvidia-xconfig: # nvidia-xconfig: X configuration file generated by nvidia-xconfig # nvidia-xconfig: version 256.35 (buildmeister@builder101) Wed Jun 16 19:25:59 PDT 2010 Section "ServerLayout" Identifier "Layout0" Screen 0 "Screen0" InputDevice "Keyboard0" "CoreKeyboard" InputDevice "Mouse0" "CorePointer" EndSection Section "Files" EndSection Section "Module" Load "dbe" Load "extmod" Load "type1" Load "freetype" Load "glx" EndSection Section "InputDevice" # generated from default Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/psaux" Option "Emulate3Buttons" "no" Option "ZAxisMapping" "4 5" EndSection Section "InputDevice" # generated from default Identifier "Keyboard0" Driver "kbd" EndSection Section "Monitor" Identifier "Monitor0" VendorName "Unknown" ModelName "Unknown" Hor

  Read the article

• On Windows 7, how do I fix my cmd.exe icon and remove cruft from the jumplist

  - by sb3700

  Hi. When installing drivers for my Gigabyte motherboard, I installed a "Games" link which ran from a batch file. This was pinned to the taskbar by default. As a result, it changed the icon for cmd.exe to the icon for Games. I uninstalled the Games and it got rid of the icon leaving it with a white rectangle thing (I can post screenshots on request). There is also a link on the jumplist to open Games, which just opens a cmd window. I've tried rebuilding my icon cache as per Changing Windows 7 pinned taskbar icons, but this only removed the white rectangle icon, leaving me with no real icon. c:\windows\system32\cmd.exe still has the appropriate icon in explorer, just not on the taskbar. Any ideas on how to fix this annoyance?

  Read the article

• Puppet templates and undefined/nil variables

  - by larsks

  I often want to include default values in Puppet templates. I was hoping that given a class like this: class myclass ($a_variable=undef) { file { '/tmp/myfile': content => template('myclass/myfile.erb'), } } I could make a template like this: a_variable = <%= a_variable || "a default value" %> Unfortunately, undef in Puppet doesn't translate to a Ruby nil value in the context of the template, so this doesn't actually work. What is the canonical way of handling default values in Puppet templates? I can set the default value to an empty string and then use the empty? test... a variable = <%= a_variable.empty? ? "a default value" : a_variable %> ...but that seems a little clunky.

  Read the article

• set tap0 using virt-manager for bridged wireless

  - by DaveO

  After 3 days I finally have kvm guests working on the network via wireless (link below - thanks!): My network is 192.168.1.0/24 on the host: sudo sh -c "echo 1 > /proc/sys/net/ipv4/ip_forward" sudo tunctl -t tap0 sudo ip link set tap0 up sudo ip addr add 192.168.1.25/24 dev tap0 sudo route add -host 192.168.1.30 dev tap0 sudo parprouted wlan0 tap0 on the guest: auto eth0 iface eth0 inet static address 192.168.1.30 netmask 255.255.255.0 network 192.168.1.0 broadcast 192.168.1.255 gateway 192.168.1.25 and start the guest: sudo kvm /path/to/guest.img -net nic,macaddr=DE:AD:BE:EF:90:26 -net tap,ifname=tap0,script=no This works great and I can ping the local network and the internet back and forth between the guest. But how do I add these settings to the guest's xml config so I can start the guest via virt-manager with the same nic settings? ref: http://www.linuxquestions.org/questions/debian-26/kvm-wireless-bridge-network-691953/

  Read the article

• How to download a url as a file?

  - by Michelle

  A website url has "hidden" some mp3 files by embedding them as shockwave files, as follows: <span class="caption"><!-- Odeo player --><embed src="http://odeo.com/flash/audio_player_tiny_gray.swf"quality="high" name="audio_player_tiny_gray" align="middle" allowScriptAccess="always" wmode="transparent" type="application/x-shockwave-flash" flashvars="valid_sample_rate=true external_url=http://podcast.cbc.ca/mp3/sundayeditionstream_20081125_9524.mp3" pluginspage="http://www.macromedia.com/go/getflashplayer"></embed></span> How can I download the files for off-line listening? I've found two methods: 1. The StackOverflow Method Create a new local html file with just the links eg <a href="http://podcast.cbc.ca/mp3/sundayeditionstream_20081125_9524.mp3">Sunday Edition 25Nov2008</a> Open the file in the browser, right click the link and File Save Link As. 2. The SuperUser Method Install the Firefox addin Iget. (Be sure to use the right version for your Firefox version.) Tools Downloads Enter url in field. Are there any other ways?

  Read the article

< Previous Page | 200 201 202 203 204 205 206 207 208 209 210 211  | Next Page >