Search Results

Search found 12281 results on 492 pages for 'ip blocking'.

Page 204/492 | < Previous Page | 200 201 202 203 204 205 206 207 208 209 210 211  | Next Page >

• Windows 7 and XP Networking

  - by David-Zazeski

  I'm trying to setup a home network between a windows 7 and windows xp machine. I have a small hub. My XP computer has a manually assigned IP address (192.168.0.10) and I set my Windows 7 machine to have a manually assigned IP address (192.168.0.15). The XP computer works, but the Windows 7 machine does not see the network. It says that there is no connectivity. Ping does not work from either machine. Does anyone have any suggestions?

  Read the article

• OSX Snow Leopard - Multiple httpd/apache instances for PHP 5.2 & 5.3 together

  - by iongion

  I need to run Apache with both php 5.2 and 5.3, without other webservers such as nginx, lighttpd, etc. Just Apache HTTPD. The easiest way to have both PHP 5.2 and PHP 5.3 on Apache, on the same machine, is to have them run in different webservers (or at least different webserver instances). I already do this on windows, it works flawlessly because it is easy to specify the conf file that a specific instance loads. But how can this be achieved on Mac OSX, without ditching the web server that OSX comes with built in ? The basic is to create N-ip addresses that each apache instance will bind to, for example: 192.168.0.52 - This is for apache httpd with PHP 5.2 192.168.0.53 - This is for apache httpd with PHP 5.3 (each apache will bind to its own ip address) On OSX, i don't know how to configure HTTPD to start as multiple service/daemon, with different startup httpd.conf files!

  Read the article

• How to turn on SMTP relaying? Getting error: "SMTP Error: The following recipients failed [address]"

  - by Susan

  Attempting to configure some software on our server to send email via SMTP. When testing it, get this SMTP Error: SMTP Error: The following recipients failed [address]" Based on my research and a reply from the software's support team this error usually occurs because relaying is not allowed on the SMTP server from the IP address of the web server. The solution is to "Go to the configuration of your SMTP server and turn relaying on for your IP address" My question is -- how do I do this? Is this done from WHM? cPanel?

  Read the article

• Having troubles connectiong Magento to external Windows Database Server using Windows Azure

  - by Kevin H

  "I tried to make this easy to read through" I am using Ubuntu 12.04 LTS for Magento and installed these commands onto the system: sudo apt-get install apache2 sudo apt-get install php5 libapache2-mod-php5 sudo apt-get install php5-mysql sudo apt-get install php5-curl php5-mcrypt php5-gd php5-common sudo apt-get install php5-gd I used Windows Server 2008 R2 August 2012 for Mysql Server For a reference, I used http://www.windowsazure.com/en-us/manage/windows/common-tasks/install-mysql/ When the server was setup, I added an empty disk to it Then, I added endpoints 3306 Next I accessed the server remotely After that, I formatted the empty disk and was inserted as F: Next I downloaded Mysql from http://*.mysql.com version Windows (x86, 64-bit), MSI Installer 5.5.28 In the installation process, I used these settings: Typical Setup - Clicked Next, install, next Chose Detailed Configuration - Clicked next Chose Dedicated MySQL Server Machine - Clicked Next Chose Transactional Database Only - Clicked Next Chose the "F:" Drive - Clicked Next Chose Online Transactional Processing (OLTP) - Clicked Next For Networking Options, I checkmarked 'Enable TCP/IP Networking" 'Add firewall exception for this port' 'Enable Strict Mode' - Clicked Next Chose Standard Character Set - Clicked Next For Windows Options, I checkedmarked 'Install as Window Service" 'Launch the MySQL Server automatically' 'Include Bin Directory in Windows PATH - Clicked Next For Security Options, I checkmarked 'Modify Security Settings' and set root password - Clicked Next Finally clicked Execute and Finish These are the Firewall Setting that I set I clicked inbound rules Properties Scope Allow IP Address and used the internal Address for Magento Server Clicked Apply and exited Next, I opened up MySQL 5.x Command Line Client Entered Root Password Then entered these commands mysql create database magento; mysql Create user magentouser identified by 'password'; mysql Grant select, insert, create, alter, update, delete, lock tables on magento.* to magentouser mysql exit Finally, I opened up the Magento Downloader Magento validation has approved all PHP version is right. Your version is 5.3.10-1ubuntu3.4. PHP Extension curl is loaded PHP Extension dom is loaded PHP Extension gd is loaded PHP Extension hash is loaded PHP Extension iconv is loaded PHP Extension mcrypt is loaded PHP Extension pcre is loaded PHP Extension pdo is loaded PHP Extension pdo_mysql is loaded PHP Extension simplexml is loaded These are all installed on Magento Server For the Database Connection, I used: The Database server only has MySQL 5.5 Server installed on it Host - Internal IP address User Name - The User I created when setting up database Password - The Password I created when setting up database For the password, I did some research and found out that Magento only accepts alphanumeric, so I went and set it up again and used only alphanumeric for the User password Now, I am still getting Accessed denied for database Connection. Also, I have tryed to setup mysql on independant Linux Server but kept getting errors. When, I found the solution. Wouldn't work, so I decided to try Windows. These is the questions, I have been asking and researching to debug this issue Is it because I am using Linux for magento and Windows for Database. I have had no luck in finding a reason why this wouldn't work There must be something, I am missing I also researched the difference between linux sql databases and windows sql databases but have not come to conclusion, if installing Mysql on windows would make a difference in syntax and coding. I have spent a lot of time looking into this and need some help with direction on how to complete my project. Any type of help would be appreciated.

  Read the article

• web applications in IIS7.5 on Windows 7 machine are unreachable

  - by user41281

  Two problems with a Windows 7 machine on this network: No one can access the web applications hosted in IIS. I am unable to ping this machine I have turned off the Windows Firewall and have disabled the service. Is there a way to detect which application is blocking the incoming requests to IIS? Any help is appreciated in advance.

  Read the article

• Can't set up printing from Mac OS X (10.5.7) to an HP PSC 2410 shared from PC running Ubuntu 9.10

  - by Weston C

  I've got an HP PSC 2410 printer shared from a fresh Ubuntu 9.10 installation. I'm able to send documents to this printer over the network from another Ubuntu machine. But so far, I haven't been able to find a setup where I can send documents to that printer from a MacBook running 10.5.7. On the Mac side, when setting things up, I go into System Prefs Print & Fax, click on the "+" mark, select "IP", pick "IPP", enter the IP address of the Ubuntu box, leave the queue blank, enter the Name and location, and I think it's when I get to the "Print Using" (driver selection) part that I'm running into issues. If I use "Auto Select", it defaults to "Generic PostScript Printer", which I doubt the PSC 2410 is (and sure enough, if I print, the jobs don't go through). If I try "Select a driver to use...", there's not an option for an HP PSC 2400. This seems a little odd: I can plug the printer directly into one of our Macs and it immediately figures out the driver and I can print no problem, but that's apparently the way things work. So, that leaves one option: "Other", which, when selected, brings up a dialog apparently for the purpose of manually locating a driver. I've tried visiting HP's web site. They have drivers for earlier versions of Mac OS X, but state that after 10.4, Mac OS X should just come with the relevant drivers. I've also tried setting things up by interacting with the CUPS server on the Mac through a browser: I go to http://localhost:631/, select "Add New Printer", pick "Internet Printing Protocol (http)" for the Device selection, enter "http://ubuntu.machine.ip.address:631/printers/hp-psc-2400-series" for the Device URI, select "HP" for Make, and then on the next screen, we're back to the problem where the PSC 2400 just doesn't show up. There's an option to "provide a PPD file", which I assume would be the printer driver I can't find. A Google search for "HP PSC 2410 ppd Leopard" doesn't seem to yield much other than a reminder that the printer is supposed to just work out of the box on Leopard. A local search for ".ppd" or "2410" on either Mac also doesn't yield anything that looks like a relevant print driver. I'm totally stuck at this point. Any advice?

  Read the article

• Directly editing IIS 7 applicationHost.config configuration file

  - by lunadesign

  I know that IIS 7+ now uses XML config files instead of the metabase. I also know that if I edit a web.config file for a given site, IIS automagically detects the changes and implements any corresponding config changes. However, does this also apply to the server-level applicationHost.config settings file? (Its usually located in C:\windows\system32\inetsrv\config.) Specifically, is it safe to carefully edit this file instead of using IIS Manager or the appcmd command line utility? I couldn't find anything in the documentation that said it was okay or not okay to do this. I'm curious because I have to change the bindings for numerous sites from one IP to another. It would be much faster to simply do a global search and replace for the IP address in the config file instead of manually editing a few dozen sites in the GUI.

  Read the article

• How do the routers communicate with each other ?

  - by Berkay

  Let's say that i want make a request a to a web page which is hosted in Europe (i live in USA).My packets only consist the IP address of the web page, first the domain name to ip address transformation is done, then my packets start their journey through to europe. i assume that MAC addresses never used in this situation? are they? First, my packets deal with many routers on way how these routers communicate with each other?, are router addresses added to my packet headers ? Second, is there a specific path router to router comminication or which conditions affect this route? Third to cross the Atlantic Ocean, are cables used or... ?

  Read the article

• How to Track Duplicate Downloads

  - by user1089173

  I have a product and we are running a campaign for it to allow users to download a trial version. My questions is there any way to detect multiple downloads from the same computer but behind a proxy. For example if a person uses a proxy server, changes his/her ip and downloads our trial version multiple times from different Ip's, is there a way to detect that it is the same person who's downloading the s/w. We use only Name and Email addresses to be entered before downloading our s/w and that can easily be created. We cannot add any other fields to the form (like phoneno.)

  Read the article

• How do internal smtp servers send mail to internal mail servers on the network?

  - by dmr83457

  We have upgraded our internal corporate email server and the IP address has changed internal to our network. A second email server is used for sending bulk jobs for a mailing list service that we offer. Since the switch of the internal corporate server IP we have been seeing problems when the bulk email server is trying to send email to our own domain. The log shows that it is still trying to hit the old corporate server instead of the new one. I have looked through all settings for the bulk email software and see nothing set there to send to internal mail servers, and I do not recall doing anything special to get this working when setup a couple years ago. Is there a setting in Win2003 or on the network that enables the mapping of MX record external IPs to internal IPs so mail gets routed correctly?

  Read the article

• Is my system good enough for Hotmail Junk Mail Reporting Program? JMRP

  - by Marius

  Hello there! :) Thank you for a great website! I am interested in Hotmails Junk Mail Reporting Program (JMRP). One of the requirements they have are (translated from Norwegian to English), and I wonder if I qualify: Is the IP-address you registered subject to the company name/domain name? Or do you have your own sending rights from the IP address via the hosting company (that you do not share with other senders) We ask that you attach documents supporting this. These are my details: host: smtp.sharedhostingcompany.com username: username for my email account password: my private password. email address: [email protected] Is this what they require? Thank you for your time. Kind regards, Marius

  Read the article

• Problems installing LYNC on non-domain controler

  - by Trikks

  I have two servers in this set up. AD and EX, the domain is called mydomain.net The AD is a Windows 2008 Server (32 bit) with Active Directory installed AD only has it's own ip in the DNS-servers list AD.mydomain.net does resolve correctly in the dns EX is a Windows 2008 R2 that is connected to the mydomain.net-domain EX only DNS server is the ip of the ad.mydomain.net There are no firewalls running between the two servers When trying to install Lync 2010 on the EX server I get the following error "Not available :Failure occurred attempting to check the schema state.Please ensure Active Directory is reachable." I can control the AD from EX, also login to it and do successful checks like netdom query /domain:mydomain.net fsmo ...that resolves correctly I suspect there is something fundamentally wrong with my setup, maybe Lync need a 2k8 R2 ad?

  Read the article

• Does Dynamic DNS require separate subdomains?

  - by kce

  Hello. I have a functioning DHCP/DNS (ISC Bind 9.6, DHCP 3.1.1) server running on Debian that I would like to add DynamicDNS functionality to. I have a pretty simple question: Does DynamicDNS require (or recommend) separate sub-domains? I have seen a few tutorials where the the clients that are acquiring their IP addresses and other networking information via DHCP are on a different sub-domain as the servers which are statically configured (both in terms of IP, and DNS). For example: All the clients are on ws.example.org and the servers on example.org. Right now all of our servers and clients are in the same domain (example.org) but spread across different zone files (because we have multiple subnets). The clients are configured with DHCP and the servers are configured statically. If I want to setup DynamicDNS for the clients should I use a separate sub-domain? What's the best practice here (and why or why not would it be a bad idea to do otherwise)? Thanks.

  Read the article

• Reproducible file corruption for files on windows share

  - by bbuser

  We have about 40 file servers in our intranet to distribute software packages. The servers have names like example01, example02 etc. Every name resolves to a single IP-address (A-record) and the IP resolves back to that name (PTR) for every single server. The thing is, that for a certain file (mypackage.cab) I get different results depending on whether I use: \\192.0.2.01\fs\pkg\X12345678 or \\example01.foo\fs\pkg\X12345678 While in one case the file is correct in the other case the file has exactly the right size, but it is all zeros. For a certain combination of client and server I can reproduce this reliably. It doesn´t matter if I download in Windows Explorer, via robocopy or even from Linux with smbclient. It´s always the same, one file corrupt, the other ok. It happens only for certain combinations of clients and servers, not others. For example: client01 example01.foo -> OK (192.0.2.01 is also OK) client01 example02.foo -> broken (but 192.0.2.02 is OK) client02 example01.foo -> broken (but 192.0.2.01 is OK) client02 example02.foo -> OK (192.0.2.02 is also OK) client03 example06.foo -> OK (but 192.0.2.06 is broken) client03 example07.foo -> OK (192.0.2.07 is also OK) etc... In some cases I get the broken file when I use the IP address in other cases when I use the name. For every client the majority of servers is Ok, but from every client I tested I have at least 4 cases of broken files. All this happens only for mypackage.cab (about 5k in size), it never happened for any of the other files in the same directory. Confused? Certainly I am. Any idea what can cause this or any idea what to try to figure it out is welcome. Clients are Windows XP. Servers are NetApp filers I don´t have access to. I can (and will) contact the filer team again, but first I have to have an idea what is going on.

  Read the article

• Trouble joining Windows Server 2008 to Domain

  - by Jim R

  When I try to join my new server to my existing domain I get the following error: "An attempt to resolve the DNS name of a DC in the domain being joined has failed. Please verify this client is configured to reach a DNS server that can resove DNS names in the target domain." I have tried all of the following already: Successfully pinged the domain controller. Ping the new server from the domain controller by IP address and by DNS name. Ping the DC server from the new server by IP address and by DNS name. Changed the network to DHCP (it was originally static). No joy as static or DHCP. Turned off all firewall settings. Added the domain name to 'hosts' file. Added the server name of the primary domain controller to the 'hosts' file in the new server. Any ideas? Thanks in advance for any help! Jim Update: With help from J. Brian Kelly (Thanks) I have managed to narrow down the problem to a DNS issue. Specifically, UDP/53 packets are being sent (they are seen in Network Monitor), but are not getting to the DNS server. But, I do not yet know why. Update: The quested output from IPCONFIG for the HyperV host and the virtual machine. IPCONFIG from HyperV Server Windows IP Configuration Host Name . . . . . . . . . . . . : HYPER Primary Dns Suffix . . . . . . . : sfi-wfc.com Node Type . . . . . . . . . . . . : Hybrid IP Routing Enabled. . . . . . . . : No WINS Proxy Enabled. . . . . . . . : No DNS Suffix Search List. . . . . . : sfi-wfc.com Ethernet adapter Local Area Connection 4: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Primary Network Physical Address. . . . . . . . . : 00-30-48-CA-CC-7A DHCP Enabled. . . . . . . . . . . : No Autoconfiguration Enabled . . . . : Yes Link-local IPv6 Address . . . . . : fe80::cd16:3ac2:3d4f:e275%679(Preferred) IPv4 Address. . . . . . . . . . . : 192.168.100.1(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : 192.168.100.10 DHCPv6 IAID . . . . . . . . . . . : -1476382648 DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-12-10-20-E9-00-30-48-CA-CC-7A DNS Servers . . . . . . . . . . . : 192.168.100.5 NetBIOS over Tcpip. . . . . . . . : Enabled Ethernet adapter Local Area Connection 3: Media State . . . . . . . . . . . : Media disconnected Connection-specific DNS Suffix . : sfi Description . . . . . . . . . . . : Intel(R) 82576 Gigabit Dual Port Network Connection #2 Physical Address. . . . . . . . . : 00-30-48-CA-CC-7B DHCP Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes IPCONFIG from Virtual Machine Windows IP Configuration Host Name . . . . . . . . . . . . : DB Primary Dns Suffix . . . . . . . : Node Type . . . . . . . . . . . . : Hybrid IP Routing Enabled. . . . . . . . : No WINS Proxy Enabled. . . . . . . . : No DNS Suffix Search List. . . . . . : sfi Ethernet adapter Local Area Connection 2: Connection-specific DNS Suffix . : sfi Description . . . . . . . . . . . : Microsoft Virtual Machine Bus Network Adapter Physical Address. . . . . . . . . : 00-15-5D-66-03-02 DHCP Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes IPv4 Address. . . . . . . . . . . : 192.168.100.128(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.255.0 Lease Obtained. . . . . . . . . . : Saturday, August 29, 2009 10:44:45 AM Lease Expires . . . . . . . . . . : Tuesday, September 01, 2009 3:08:33 PM Default Gateway . . . . . . . . . : 192.168.100.10 DHCP Server . . . . . . . . . . . : 192.168.100.5 DNS Servers . . . . . . . . . . . : 192.168.102.5 Primary WINS Server . . . . . . . : 192.168.100.5 NetBIOS over Tcpip. . . . . . . . : Enabled Tunnel adapter Local Area Connection* 8: Media State . . . . . . . . . . . : Media disconnected Connection-specific DNS Suffix . : sfi Description . . . . . . . . . . . : isatap.sfi Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0 DHCP Enabled. . . . . . . . . . . : No Autoconfiguration Enabled . . . . : Yes Tunnel adapter Local Area Connection* 9: Media State . . . . . . . . . . . : Media disconnected Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Teredo Tunneling Pseudo-Interface Physical Address. . . . . . . . . : 02-00-54-55-4E-01 DHCP Enabled. . . . . . . . . . . : No Autoconfiguration Enabled . . . . : Yes

  Read the article

• How can I have APF block script kiddies that mod_security detects?

  - by Gaia

  In one of the vhosts' error_log I found thousands of lines like these, all from the same IP: [Mon Apr 19 08:15:59 2010] [error] [client 61.147.67.206] mod_security: Access denied with code 403. Pattern match "(chr|fwrite|fopen|system|e?chr|passthru|popen|proc_open|shell_exec|exec|proc_nice|proc_terminate|proc_get_status|proc_close|pfsockopen|leak|apache_child_terminate|posix_kill|posix_mkfifo|posix_setpgid|posix_setsid|posix_setuid|phpinfo)\\\\(.*\\\\)\\\\;" at THE_REQUEST [id "330001"] [rev "1"] [msg "Generic PHP exploit pattern denied"] [severity "CRITICAL"] [hostname "x.x.x.x"] [uri "//webmail/config.inc.php?p=phpinfo();"] Given how obvious the situation is, how come mod_security isnt automatically adding at least that IP to deny rules? There is no way someone hasnt thought of this before...

  Read the article

• Netinstalling CentOS if the gateway is in a different subnet

  - by James Lawrie

  I have a KVM host (A) running a virtual machine (B). They each have their own external IP address and the networking is setup using bridging between eth0 and br0 on A. B uses eth0, with A being the gateway. The problem is that the two external IP addresses are on different subnets (different /8s in fact) so by default, B claims it cannot reach A (Network Unreachable). I can resolve this by adding a static route on B: echo "any host gateway_ip dev eth0" > /etc/sysconfig/static-routes Modifying /etc/init.d/networking to reload the gateway after applying static routes (I only added the final line before fi): if [ -f /etc/sysconfig/static-routes ]; then grep "^any" /etc/sysconfig/static-routes | while read ignore args ; do /sbin/route add -$args done route add default gw "${GATEWAY}" fi If I then restart networking, it comes online. How can I do this (or work around it some other way) prior to the system being installed, ideally inside an Anaconda kickstart file?

  Read the article

• Reproducible file corruption for files on windows share

  - by bbuser

  We have about 40 file servers in our intranet to distribute software packages. The servers have names like example01, example02 etc. Every name resolves to a single IP-address (A-record) and the IP resolves back to that name (PTR) for every single server. The thing is, that for a certain file (mypackage.cab) I get different results depending on whether I use: \\192.0.2.01\fs\pkg\X12345678 or \\example01.foo\fs\pkg\X12345678 While in one case the file is correct in the other case the file has exactly the right size, but it is all zeros. For a certain combination of client and server I can reproduce this reliably. It doesn´t matter if I download in Windows Explorer, via robocopy or even from Linux with smbclient. It´s always the same, one file corrupt, the other ok. It happens only for certain combinations of clients and servers, not others. For example: client01 example01.foo -> OK (192.0.2.01 is also OK) client01 example02.foo -> broken (but 192.0.2.02 is OK) client02 example01.foo -> broken (but 192.0.2.01 is OK) client02 example02.foo -> OK (192.0.2.02 is also OK) client03 example06.foo -> OK (but 192.0.2.06 is broken) client03 example07.foo -> OK (192.0.2.07 is also OK) etc... In some cases I get the broken file when I use the IP address in other cases when I use the name. For every client the majority of servers is Ok, but from every client I tested I have at least 4 cases of broken files. All this happens only for mypackage.cab (about 5k in size), it never happened for any of the other files in the same directory. Confused? Certainly I am. Any idea what can cause this or any idea what to try to figure it out is welcome. Clients are Windows XP. Servers are NetApp filers I don´t have access to. I can (and will) contact the filer team again, but first I have to have an idea what is going on.

  Read the article

• Need IPSec help on Windows 2003

  - by user37456

  Hey guys, I am trying to configure IPSec between a web and app server in our environment. I want all traffic between these two servers to use IPsec and be encrypted. These servers are on the same domain so i am currently using Kerebos for security, I have also tried pre-defined keys and nothing changed. When I try and ping between the servers I get "Negotiating IP Security" everytime. I have also confirmed that when I change "Require Security" to "Permit" everything works so IPSec is working, I believe its something with my security setup. Under the security tab both servers have the default 3DES keys first and then DES keys. I have also specified tunnel endpoints (the alternate server's IP). What am I missing? Thanks for any help..

  Read the article

• VPS DNS Resolution problem

  - by fatnic

  Hi. I've recently moved from a shared hosting to a VPS at vps.net but I think I might have broken it already! I have domain.com and domain.net. I have setup DNS records for both to point to my server. However, only domain.com pings to the correct IP address. domain.net is pointing to a different IP address. Possibly the old server it was pointing to. This has now been deleted. Is there possibly any way to correct this without having to submit a ticket to VPS.net?

  Read the article

• Hostname problems in CentOS 5.5

  - by spoon16

  I just set up a CentOS 5.5 machine on my local network and attempted to modify the hostname by editing /etc/sysconfig/network file. When I'm logged in locally the change to the hostname is reflected and seems to be working fine. When I open a SSH session via PuTTY from Windows this is what I see at the prompt: [root@? ~]# cat /etc/sysconfig/network NETWORKING=yes NETWORKING_IPV6=yes HOSTNAME=mini.local [root@? ~]# sysctl kernel.hostname kernel.hostname = ? [root@? ~]# hostname ? [root@? ~]# hostname -f hostname: Unknown server error A couple of other symptoms that may be helpful in troubleshooting this problem. I can ping the CentOS box from my Windows machine via IP but not hostname. Also, my Netgear router does not display the hostname when I view the "Connected Devices", I do see the mac address and the proper IP listed though. How can I make it so that the hostname is properly propagated throughout my network?

  Read the article

• What equipment do real ISP's use?

  - by Allanrbo

  In a dormitory of 550 residents, people often mistakenly set up DHCP servers for the whole network by plugging in their private Wi-Fi routers wrongly. Also recently, someone mistakenly configured their PC to a static IP being the same as that of the default gateway. We use cheap 3Com switches at the moment. I know that Cisco switches support DHCP snooping to solve the DHCP problem, but that still does not solve the default gateway IP takeover problem. What sort of switch equipment do real ISP's use so their customers cannot break the network for the other customers?

  Read the article

• chrooting user causes "connection closed" message when using sftp

  - by George Reith

  First off I am a linux newbie so please don't assume much knowledge. I am using CentOS 5.8 (final) and using OpenSSH version 5.8p1. I have made a user playwithbits and I am attempting to chroot them to the directory home/nginx/domains/playwithbits/public I am using the following match statement in my sshd_config file: Match group web-root-locked ChrootDirectory /home/nginx/domains/%u/public X11Forwarding no AllowTcpForwarding no ForceCommand /usr/libexec/openssh/sftp-server # id playwithbits returns: uid=504(playwithbits) gid=504(playwithbits) groups=504(playwithbits),507(web-root-locked) I have changed the user's home directory to: home/nginx/domains/playwithbits/public Now when I attempt to sftp in with this user I instantly get the message: connection closed Does anyone know what I am doing wrong? Edit: Following advice from @Dennis Williamson I have connected in debug mode (I think... correct me if I'm wrong). I have made a bit of progress by using chmod to set permissions recursively of all files in the directly to 700. Now I get the following messages when I attempt to log on (still connection refused): Connection from [My ip address] port 38737 debug1: Client protocol version 2.0; client software version OpenSSH_5.6 debug1: match: OpenSSH_5.6 pat OpenSSH* debug1: Enabling compatibility mode for protocol 2.0 debug1: Local version string SSH-2.0-OpenSSH_5.8 debug1: permanently_set_uid: 74/74 debug1: list_hostkey_types: ssh-rsa,ssh-dss debug1: SSH2_MSG_KEXINIT sent debug1: SSH2_MSG_KEXINIT received debug1: kex: client->server aes128-ctr hmac-md5 none debug1: kex: server->client aes128-ctr hmac-md5 none debug1: SSH2_MSG_KEX_DH_GEX_REQUEST received debug1: SSH2_MSG_KEX_DH_GEX_GROUP sent debug1: expecting SSH2_MSG_KEX_DH_GEX_INIT debug1: SSH2_MSG_KEX_DH_GEX_REPLY sent debug1: SSH2_MSG_NEWKEYS sent debug1: expecting SSH2_MSG_NEWKEYS debug1: SSH2_MSG_NEWKEYS received debug1: KEX done debug1: userauth-request for user playwithbits service ssh-connection method none debug1: attempt 0 failures 0 debug1: user playwithbits matched group list web-root-locked at line 91 debug1: PAM: initializing for "playwithbits" debug1: PAM: setting PAM_RHOST to [My host info] debug1: PAM: setting PAM_TTY to "ssh" debug1: userauth-request for user playwithbits service ssh-connection method password debug1: attempt 1 failures 0 debug1: PAM: password authentication accepted for playwithbits debug1: do_pam_account: called Accepted password for playwithbits from [My ip address] port 38737 ssh2 debug1: monitor_child_preauth: playwithbits has been authenticated by privileged process debug1: SELinux support disabled debug1: PAM: establishing credentials User child is on pid 3942 debug1: PAM: establishing credentials Changed root directory to "/home/nginx/domains/playwithbits/public" debug1: permanently_set_uid: 504/504 debug1: Entering interactive session for SSH2. debug1: server_init_dispatch_20 debug1: server_input_channel_open: ctype session rchan 0 win 2097152 max 32768 debug1: input_session_request debug1: channel 0: new [server-session] debug1: session_new: session 0 debug1: session_open: channel 0 debug1: session_open: session 0: link with channel 0 debug1: server_input_channel_open: confirm session debug1: server_input_global_request: rtype [email protected] want_reply 0 debug1: server_input_channel_req: channel 0 request env reply 0 debug1: session_by_channel: session 0 channel 0 debug1: session_input_channel_req: session 0 req env debug1: server_input_channel_req: channel 0 request subsystem reply 1 debug1: session_by_channel: session 0 channel 0 debug1: session_input_channel_req: session 0 req subsystem subsystem request for sftp by user playwithbits debug1: subsystem: cannot stat /usr/libexec/openssh/sftp-server: Permission denied debug1: subsystem: exec() /usr/libexec/openssh/sftp-server debug1: Forced command (config) '/usr/libexec/openssh/sftp-server' debug1: session_new: session 0 debug1: Received SIGCHLD. debug1: session_by_pid: pid 3943 debug1: session_exit_message: session 0 channel 0 pid 3943 debug1: session_exit_message: release channel 0 debug1: session_by_channel: session 0 channel 0 debug1: session_close_by_channel: channel 0 child 0 debug1: session_close: session 0 pid 0 debug1: channel 0: free: server-session, nchannels 1 Received disconnect from [My ip address]: 11: disconnected by user debug1: do_cleanup debug1: do_cleanup debug1: PAM: cleanup debug1: PAM: closing session debug1: PAM: deleting credentials

  Read the article

• Local Area Connection in Slacware 13

  - by asdasd

  I have windows xp and slackware 13 on one computer, and the ISP provided me a new modem. There was manual how to configure it, so i start the web browser and typed it's ip address 192.168.1.1 and the web interface of the modem appeared so i logged in, that was easy. But under slackware, i don't know how to enter in the modem config / web interface. I type in 192.168.1.1 but it's not working. Here's the output of ifconfig eth0 : eth0 Link encap:Ethernet HWaddr 00:a1:b0:01:18:28 inet addr:169.254.73.8 Bcast:169.254.255.255 Mask:255.255.0.0 UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) Interrupt:17 Memory:febff400-febff4ff How can i log in into the modem from linux, i.e. find it's assigned ip under slackware ? Thank you.

  Read the article

• Sharing a printer over the net from Windows 7 to Windows Server 2003

  - by Grant Unwin

  Hi, I need to share a printer that is connected to a Windows 7 computer. The windows 7 computer is in another building about an hours drive away. The computer that needs to access the printer is running Windows Server 2008. Ive tried setting the printer as 'shared' for 'everyone' on the Windows 7 PC and accessing it from the server by adding a TCP/IP port to the IP address but the printer just wont add. From googling aparently it may need setting up as a printer server through IIS, but i'm just not sure on the best practice. Any help greatly appreciated. Thanks Grant Unwin

  Read the article

< Previous Page | 200 201 202 203 204 205 206 207 208 209 210 211  | Next Page >