Search Results

Search found 5784 results on 232 pages for 'points'.

Page 204/232 | < Previous Page | 200 201 202 203 204 205 206 207 208 209 210 211  | Next Page >

• Upgrading to Oracle Enterprise Manager 12c Release 2: Top Tips One Must Know

  - by AnkurGupta

  Recently Oracle announced incremental release of Enterprise Manager 12c called Enterprise Manager 12c Release 2 (EM12c R2) which includes several new exciting features (Press announcement). Right before the official release, we upgraded an internal production site from EM 12c R1 to EM 12c R2 and had an extremely pleasant experience. Let me share few key takeaways as well as few tips from this upgrade exercise. I - Why Should You Upgrade To Enterprise Manager 12c Release 2 While an upgrade is usually recommended primarily to take benefit of the latest features (which is valid for this upgrade as well), I found several other compelling reasons purely from deployment perspective. Standardize your EM deployment:  Enterprise Manager comprises of several different components (OMS, agents, plug-ins, etc) and it might be possible that these are at varied patch levels in your environment. For instance, in case of an environment containing Bundle Patch 1 (customer announcement), there is a good chance that you may not have all the components up-to-date. There are two possible reasons. Bundle Patch 1 involved patching different components (OMS, agents, plug-ins) with multiple one-off patches which may not have been applied to all components yet. Bundle Patch 1 for different platforms were not released together. Which means you may not have got the chance to patch all the components on different platforms. Note: BP1 patches are not mandatory to upgrade to EM12c R2 release EM 12c R2 provides an excellent opportunity to standardize your Cloud Control environment (OMS, repository and agents) and plug-ins to latest versions in single shot. All platform releases are made available simultaneously: For the very first time in the history of EM release, all the platforms were released on day one itself, which means you do not need to wait for platform specific binaries for EM OMS or Agent to perform install or upgrades in a heterogeneous environment. Highly refined and automated process – Upgrade process is by far the smoothest and the cleanest as compared to previous releases of Enterprise manager. Following are the ones that stand out. Automatic Plug-in management – Plug-in upgrade along with new plug-in deployment is supported in upgrade installer wizard which means bulk of the updates to OMS and repository can be done in the same workflow. Saves time and minimizes user inputs. Plug-in Upgrade or Migrate Auto Update: While doing the OMS and repository upgrade, you can use Auto Update screen in Oracle Universal Installer to check for any updates/patches. That will help you to avoid the know issues and will make sure that your upgrade is successful. Allows mass upgrade of EM Agents – A new dedicated menu has been added in the EM console for agent upgrade. Agent upgrade workflow is extremely simple that requires agent name as the only input. ADM / JVMD Manager/Agent upgrade – complete process is supported via UI screens. EM12c R2 Upgrade Guide is much simpler to follow as compared to those for earlier releases. This is attributed to the simpler upgrade process. Robust and Performing Platform: EM12c R2 release not only includes several new features, but also provides a more stable platform which incorporates several fixes and enhancements in the Enterprise Manager framework. II - Few Tips To Remember In my last post (blog link) I shared few tips and tricks from my experience applying the Bundle Patch. Recently I upgraded the same site to EM 12c R2 and found few points that you must take note of, while planning this upgrade. The tips below are also applicable to EM 12c R1 environments that do not have Bundle Patch 1 patches applied. Verify the monitored application certification – Specific targets like E-Business Suite have not yet been certified as managed target in EM 12c R2. Therefore make sure to recheck the Enterprise Manager certification Matrix on My Oracle Support before planning the upgrade. Plan downtime – Because EM 12c R2 is an incremental release of EM 12c, for EM 12c R1 to EM 12c R2 upgrade supports only 1-system upgrade approach, which mean there will be downtime. OMS name change after upgrade – In case of multi OMS environments, additional OMS is renamed after upgrade, which has few implications when you upgrade JVMD and ADP agents on OMS. This is well documented in upgrade guide but make sure you read through all the notes. Upgrading BI Publisher– EM12c R2 is certified with BI Publisher 11.1.1.6.0 only. Therefore in case you are using EM 12c R1 which is integrated with BI Publisher 11.1.1.5.0, you must upgrade the BI Publisher to 11.1.1.6.0. Follow the steps from Advanced Installation and Configuration Guide here. Perform Post upgrade Tasks – Make sure to perform post upgrade steps mentioned in documentation here. These include critical changes that must be done right after upgrade to get the right configuration. For instance Database plug-in should be upgraded to Revision 3 (12.1.0.2.0 [u120804]). Delete old OMS Home – EM12c R1 to EM12c R2 is an out of place upgrade, which means it creates a new oracle home for OMS, plug-ins, etc. Therefore please ensure that You have sufficient extra space for new OMS before starting the upgrade process. You clean up the old OMS home after the upgrade process. Steps are available here. DO NOT remove the agent home on OMS host, because agent is upgraded in-place. If you have standby OMS setup then do look into the steps to upgrade the standby OMS from the upgrade guide before going ahead. Read the right documentation – Make sure to follow the Upgrade guide which provides the most comprehensive information on EM12c R2 upgrade process. Additionally you can refer other resources to get familiar with upgrade concepts. Recorded webcast - Oracle Enterprise Manager Cloud Control 12c Release 2 Installation and Upgrade Overview Presentation - Understanding Enterprise Manager 12.1.0.2 Upgrade We are very excited about this latest release and will look forward to hear back any feedback from your upgrade experience!

  Read the article

• Independence Day for Software Components &ndash; Loosening Coupling by Reducing Connascence

  - by Brian Schroer

  Today is Independence Day in the USA, which got me thinking about loosely-coupled “independent” software components. I was reminded of a video I bookmarked quite a while ago of Jim Weirich’s “Grand Unified Theory of Software Design” talk at MountainWest RubyConf 2009. I finally watched that video this morning. I highly recommend it. In the video, Jim talks about software connascence. The dictionary definition of connascence (con-NAY-sense) is: 1. The common birth of two or more at the same time 2. That which is born or produced with another. 3. The act of growing together. The brief Wikipedia page about Connascent Software Components says that: Two software components are connascent if a change in one would require the other to be modified in order to maintain the overall correctness of the system. Connascence is a way to characterize and reason about certain types of complexity in software systems. The term was introduced to the software world in Meilir Page-Jones’ 1996 book “What Every Programmer Should Know About Object-Oriented Design”. The middle third of that book is the author’s proposed graphical notation for describing OO designs. UML became the standard about a year later, so a revised version of the book was published in 1999 as “Fundamentals of Object-Oriented Design in UML”. Weirich says that the third part of the book, in which Page-Jones introduces the concept of connascence “is worth the price of the entire book”. (The price of the entire book, by the way, is not much – I just bought a used copy on Amazon for $1.36, so that was a pretty low-risk investment. I’m looking forward to getting the book and learning about connascence from the original source.) Meanwhile, here’s my summary of Weirich’s summary of Page-Jones writings about connascence: The stronger the form of connascence, the more difficult and costly it is to change the elements in the relationship. Some of the connascence types, ordered from weak to strong are: Connascence of Name Connascence of name is when multiple components must agree on the name of an entity. If you change the name of a method or property, then you need to change all references to that method or property. Duh. Connascence of name is unavoidable, assuming your objects are actually used. My main takeaway about connascence of name is that it emphasizes the importance of giving things good names so you don’t need to go changing them later. Connascence of Type Connascence of type is when multiple components must agree on the type of an entity. I assume this is more of a problem for languages without compilers (especially when used in apps without tests). I know it’s an issue with evil JavaScript type coercion. Connascence of Meaning Connascence of meaning is when multiple components must agree on the meaning of particular values, e.g that “1” means normal customer and “2” means preferred customer. The solution to this is to use constants or enums instead of “magic” strings or numbers, which reduces the coupling by changing the connascence form from “meaning” to “name”. Connascence of Position Connascence of positions is when multiple components must agree on the order of values. This refers to methods with multiple parameters, e.g.: eMailer.Send("[email protected]", "[email protected]", "Your order is complete", "Order completion notification"); The more parameters there are, the stronger the connascence of position is between the component and its callers. In the example above, it’s not immediately clear when reading the code which email addresses are sender and receiver, and which of the final two strings are subject vs. body. Connascence of position could be improved to connascence of type by replacing the parameter list with a struct or class. This “introduce parameter object” refactoring might be overkill for a method with 2 parameters, but would definitely be an improvement for a method with 10 parameters. This points out two “rules” of connascence:  The Rule of Degree: The acceptability of connascence is related to the degree of its occurrence. The Rule of Locality: Stronger forms of connascence are more acceptable if the elements involved are closely related. For example, positional arguments in private methods are less problematic than in public methods. Connascence of Algorithm Connascence of algorithm is when multiple components must agree on a particular algorithm. Be DRY – Don’t Repeat Yourself. If you have “cloned” code in multiple locations, refactor it into a common function.   Those are the “static” forms of connascence. There are also “dynamic” forms, including… Connascence of Execution Connascence of execution is when the order of execution of multiple components is important. Consumers of your class shouldn’t have to know that they have to call an .Initialize method before it’s safe to call a .DoSomething method. Connascence of Timing Connascence of timing is when the timing of the execution of multiple components is important. I’ll have to read up on this one when I get the book, but assume it’s largely about threading. Connascence of Identity Connascence of identity is when multiple components must reference the entity. The example Weirich gives is when you have two instances of the “Bob” Employee class and you call the .RaiseSalary method on one and then the .Pay method on the other does the payment use the updated salary?   Again, this is my summary of a summary, so please be forgiving if I misunderstood anything. Once I get/read the book, I’ll make corrections if necessary and share any other useful information I might learn.   See Also: Gregory Brown: Ruby Best Practices Issue #24: Connascence as a Software Design Metric (That link is failing at the time I write this, so I had to go to the Google cache of the page.)

  Read the article

• 2d movement solution

  - by Phil

  Hi! I'm making a simple top-down tank game on the ipad where the user controls the movement of the tank with the left "joystick" and the rotation of the turret with the right one. I've spent several hours just trying to get it to work decently but now I turn to the pros :) I have two referencial objects, one for the movement and one for the rotation. The referencial objects always stay max two units away from the tank and I use them to tell the tank in what direction to move. I chose this approach to decouple movement and rotational behaviour from the raw input of the joysticks, I believe this will make it simpler to implement whatever behaviour I want for the tank. My problem is 1; the turret rotates the long way to the target. With this I mean that the target can be -5 degrees away in rotation and still it rotates 355 degrees instead of -5 degrees. I can't figure out why. The other problem is with the movement. It just doesn't feel right to have the tank turn while moving. I'd like to have a solution that would work as well for the AI as for the player. A blackbox function for the movement where the player only specifies in what direction it should move and it moves there under the constraints that are imposed on it. I am using the standard joystick class found in the Unity iPhone package. This is the code I'm using for the movement: public class TankFollow : MonoBehaviour { //Check angle difference and turn accordingly public GameObject followPoint; public float speed; public float turningSpeed; void Update() { transform.position = Vector3.Slerp(transform.position, followPoint.transform.position, speed * Time.deltaTime); //Calculate angle var forwardA = transform.forward; var forwardB = (followPoint.transform.position - transform.position); var angleA = Mathf.Atan2(forwardA.x, forwardA.z) * Mathf.Rad2Deg; var angleB = Mathf.Atan2(forwardB.x, forwardB.z) * Mathf.Rad2Deg; var angleDiff = Mathf.DeltaAngle(angleA, angleB); //print(angleDiff.ToString()); if (angleDiff > 5) { //Rotate to transform.Rotate(new Vector3(0, (-turningSpeed * Time.deltaTime),0)); //transform.rotation = new Quaternion(transform.rotation.x, transform.rotation.y + adjustment, transform.rotation.z, transform.rotation.w); } else if (angleDiff < 5) { transform.Rotate(new Vector3(0, (turningSpeed * Time.deltaTime),0)); //transform.rotation = new Quaternion(transform.rotation.x, transform.rotation.y + adjustment, transform.rotation.z, transform.rotation.w); } else { } transform.position = new Vector3(transform.position.x, 0, transform.position.z); } } And this is the code I'm using to rotate the turret: void LookAt() { var forwardA = -transform.right; var forwardB = (toLookAt.transform.position - transform.position); var angleA = Mathf.Atan2(forwardA.x, forwardA.z) * Mathf.Rad2Deg; var angleB = Mathf.Atan2(forwardB.x, forwardB.z) * Mathf.Rad2Deg; var angleDiff = Mathf.DeltaAngle(angleA, angleB); //print(angleDiff.ToString()); if (angleDiff - 180 > 1) { //Rotate to transform.Rotate(new Vector3(0, (turretSpeed * Time.deltaTime),0)); //transform.rotation = new Quaternion(transform.rotation.x, transform.rotation.y + adjustment, transform.rotation.z, transform.rotation.w); } else if (angleDiff - 180 < -1) { transform.Rotate(new Vector3(0, (-turretSpeed * Time.deltaTime),0)); //transform.rotation = new Quaternion(transform.rotation.x, transform.rotation.y + adjustment, transform.rotation.z, transform.rotation.w); print((angleDiff - 180).ToString()); } else { } } Since I want the turret reference point to turn in relation to the tank (when you rotate the body, the turret should follow and not stay locked on since it makes it impossible to control when you've got two thumbs to work with), I've made the TurretFollowPoint a child of the Turret object, which in turn is a child of the body. I'm thinking that I'm making it too difficult for myself with the reference points but I'm imagining that it's a good idea. Please be honest about this point. So I'll be grateful for any help I can get! I'm using Unity3d iPhone. Thanks!

  Read the article

• World Record Batch Rate on Oracle JD Edwards Consolidated Workload with SPARC T4-2

  - by Brian

  Oracle produced a World Record batch throughput for single system results on Oracle's JD Edwards EnterpriseOne Day-in-the-Life benchmark using Oracle's SPARC T4-2 server running Oracle Solaris Containers and consolidating JD Edwards EnterpriseOne, Oracle WebLogic servers and the Oracle Database 11g Release 2. The workload includes both online and batch workload. The SPARC T4-2 server delivered a result of 8,000 online users while concurrently executing a mix of JD Edwards EnterpriseOne Long and Short batch processes at 95.5 UBEs/min (Universal Batch Engines per minute). In order to obtain this record benchmark result, the JD Edwards EnterpriseOne, Oracle WebLogic and Oracle Database 11g Release 2 servers were executed each in separate Oracle Solaris Containers which enabled optimal system resources distribution and performance together with scalable and manageable virtualization. One SPARC T4-2 server running Oracle Solaris Containers and consolidating JD Edwards EnterpriseOne, Oracle WebLogic servers and the Oracle Database 11g Release 2 utilized only 55% of the available CPU power. The Oracle DB server in a Shared Server configuration allows for optimized CPU resource utilization and significant memory savings on the SPARC T4-2 server without sacrificing performance. This configuration with SPARC T4-2 server has achieved 33% more Users/core, 47% more UBEs/min and 78% more Users/rack unit than the IBM Power 770 server. The SPARC T4-2 server with 2 processors ran the JD Edwards "Day-in-the-Life" benchmark and supported 8,000 concurrent online users while concurrently executing mixed batch workloads at 95.5 UBEs per minute. The IBM Power 770 server with twice as many processors supported only 12,000 concurrent online users while concurrently executing mixed batch workloads at only 65 UBEs per minute. This benchmark demonstrates more than 2x cost savings by consolidating the complete solution in a single SPARC T4-2 server compared to earlier published results of 10,000 users and 67 UBEs per minute on two SPARC T4-2 and SPARC T4-1. The Oracle DB server used mirrored (RAID 1) volumes for the database providing high availability for the data without impacting performance. Performance Landscape JD Edwards EnterpriseOne Day in the Life (DIL) Benchmark Consolidated Online with Batch Workload System Rack Units BatchRate(UBEs/m) Online Users Users /Units Users /Core Version SPARC T4-2 (2 x SPARC T4, 2.85 GHz) 3 95.5 8,000 2,667 500 9.0.2 IBM Power 770 (4 x POWER7, 3.3 GHz, 32 cores) 8 65 12,000 1,500 375 9.0.2 Batch Rate (UBEs/m) — Batch transaction rate in UBEs per minute Configuration Summary Hardware Configuration: 1 x SPARC T4-2 server with 2 x SPARC T4 processors, 2.85 GHz 256 GB memory 4 x 300 GB 10K RPM SAS internal disk 2 x 300 GB internal SSD 2 x Sun Storage F5100 Flash Arrays Software Configuration: Oracle Solaris 10 Oracle Solaris Containers JD Edwards EnterpriseOne 9.0.2 JD Edwards EnterpriseOne Tools (8.98.4.2) Oracle WebLogic Server 11g (10.3.4) Oracle HTTP Server 11g Oracle Database 11g Release 2 (11.2.0.1) Benchmark Description JD Edwards EnterpriseOne is an integrated applications suite of Enterprise Resource Planning (ERP) software. Oracle offers 70 JD Edwards EnterpriseOne application modules to support a diverse set of business operations. Oracle's Day in the Life (DIL) kit is a suite of scripts that exercises most common transactions of JD Edwards EnterpriseOne applications, including business processes such as payroll, sales order, purchase order, work order, and manufacturing processes, such as ship confirmation. These are labeled by industry acronyms such as SCM, CRM, HCM, SRM and FMS. The kit's scripts execute transactions typical of a mid-sized manufacturing company. The workload consists of online transactions and the UBE – Universal Business Engine workload of 61 short and 4 long UBEs. LoadRunner runs the DIL workload, collects the user’s transactions response times and reports the key metric of Combined Weighted Average Transaction Response time. The UBE processes workload runs from the JD Enterprise Application server. Oracle's UBE processes come as three flavors: Short UBEs < 1 minute engage in Business Report and Summary Analysis, Mid UBEs > 1 minute create a large report of Account, Balance, and Full Address, Long UBEs > 2 minutes simulate Payroll, Sales Order, night only jobs. The UBE workload generates large numbers of PDF files reports and log files. The UBE Queues are categorized as the QBATCHD, a single threaded queue for large and medium UBEs, and the QPROCESS queue for short UBEs run concurrently. Oracle's UBE process performance metric is Number of Maximum Concurrent UBE processes at transaction rate, UBEs/minute. Key Points and Best Practices Two JD Edwards EnterpriseOne Application Servers, two Oracle WebLogic Servers 11g Release 1 coupled with two Oracle Web Tier HTTP server instances and one Oracle Database 11g Release 2 database on a single SPARC T4-2 server were hosted in separate Oracle Solaris Containers bound to four processor sets to demonstrate consolidation of multiple applications, web servers and the database with best resource utilizations. Interrupt fencing was configured on all Oracle Solaris Containers to channel the interrupts to processors other than the processor sets used for the JD Edwards Application server, Oracle WebLogic servers and the database server. A Oracle WebLogic vertical cluster was configured on each WebServer Container with twelve managed instances each to load balance users' requests and to provide the infrastructure that enables scaling to high number of users with ease of deployment and high availability. The database log writer was run in the real time RT class and bound to a processor set. The database redo logs were configured on the raw disk partitions. The Oracle Solaris Container running the Enterprise Application server completed 61 Short UBEs, 4 Long UBEs concurrently as the mixed size batch workload. The mixed size UBEs ran concurrently from the Enterprise Application server with the 8,000 online users driven by the LoadRunner. See Also SPARC T4-2 Server oracle.com OTN JD Edwards EnterpriseOne oracle.com OTN Oracle Solaris oracle.com OTN Oracle Database 11g Release 2 Enterprise Edition oracle.com OTN Oracle Fusion Middleware oracle.com OTN Disclosure Statement Copyright 2012, Oracle and/or its affiliates. All rights reserved. Oracle and Java are registered trademarks of Oracle and/or its affiliates. Other names may be trademarks of their respective owners. Results as of 09/30/2012.

  Read the article

• The way I think about Diagnostic tools

  - by Daniel Moth

  Every software has issues, or as we like to call them "bugs". That is not a discussion point, just a mere fact. It follows that an important skill for developers is to be able to diagnose issues in their code. Of course we need to advance our tools and techniques so we can prevent bugs getting into the code (e.g. unit testing), but beyond designing great software, diagnosing bugs is an equally important skill. To diagnose issues, the most important assets are good techniques, skill, experience, and maybe talent. What also helps is having good diagnostic tools and what helps further is knowing all the features that they offer and how to use them. The following classification is how I like to think of diagnostics. Note that like with any attempt to bucketize anything, you run into overlapping areas and blurry lines. Nevertheless, I will continue sharing my generalizations ;-) It is important to identify at the outset if you are dealing with a performance or a correctness issue. If you have a performance issue, use a profiler. I hear people saying "I am using the debugger to debug a performance issue", and that is fine, but do know that a dedicated profiler is the tool for that job. Just because you don't need them all the time and typically they cost more plus you are not as familiar with them as you are with the debugger, doesn't mean you shouldn't invest in one and instead try to exclusively use the wrong tool for the job. Visual Studio has a profiler and a concurrency visualizer (for profiling multi-threaded apps). If you have a correctness issue, then you have several options - that's next :-) This is how I think of identifying a correctness issue Do you want a tool to find the issue for you at design time? The compiler is such a tool - it gives you an exact list of errors. Compilers now also offer warnings, which is their way of saying "this may be an error, but I am not smart enough to know for sure". There are also static analysis tools, which go a step further than the compiler in identifying issues in your code, sometimes with the aid of code annotations and other times just by pointing them at your raw source. An example is FxCop and much more in Visual Studio 11 Code Analysis. Do you want a tool to find the issue for you with code execution? Just like static tools, there are also dynamic analysis tools that instead of statically analyzing your code, they analyze what your code does dynamically at runtime. Whether you have to setup some unit tests to invoke your code at runtime, or have to manually run your app (and interact with it) under the tool, or have to use a script to execute your binary under the tool… that varies. The result is still a list of issues for you to address after the analysis is complete or a pause of the execution when the first issue is encountered. If a code path was not taken, no analysis for it will exist, obviously. An example is the GPU Race detection tool that I'll be talking about on the C++ AMP team blog. Another example is the MSR concurrency CHESS tool. Do you want you to find the issue at design time using a tool? Perform a code walkthrough on your own or with colleagues. There are code review tools that go beyond just diffing sources, and they help you with that aspect too. For example, there is a new one in Visual Studio 11 and searching with my favorite search engine yielded this article based on the Developer Preview. Do you want you to find the issue with code execution? Use a debugger - let’s break this down further next. This is how I think of debugging: There is post mortem debugging. That means your code has executed and you did something in order to examine what happened during its execution. This can vary from manual printf and other tracing statements to trace events (e.g. ETW) to taking dumps. In all cases, you are left with some artifact that you examine after the fact (after code execution) to discern what took place hoping it will help you find the bug. Learn how to debug dump files in Visual Studio. There is live debugging. I will elaborate on this in a separate post, but this is where you inspect the state of your program during its execution, and try to find what the problem is. More from me in a separate post on live debugging. There is a hybrid of live plus post-mortem debugging. This is for example what tools like IntelliTrace offer. If you are a tools vendor interested in the diagnostics space, it helps to understand where in the above classification your tool excels, where its primary strength is, so you can market it as such. Then it helps to see which of the other areas above your tool touches on, and how you can make it even better there. Finally, see what areas your tool doesn't help at all with, and evaluate whether it should or continue to stay clear. Even though the classification helps us think about this space, the reality is that the best tools are either extremely excellent in only one of this areas, or more often very good across a number of them. Another approach is to offer a toolset covering all areas, with appropriate integration and hand off points from one to the other. Anyway, with that brain dump out of the way, in follow-up posts I will dive into live debugging, and specifically live debugging in Visual Studio - stay tuned if that interests you. Comments about this post by Daniel Moth welcome at the original blog.

  Read the article

• doubleTwist is an iTunes Alternative that Supports Several Devices

  - by Mysticgeek

  There are a lot of iTunes users out there, but unfortunately you can’t use it with all of your portable devices. Today we take a look at doubleTwist, which allows you to sync your media with a multitude of portable devices and easily share it as well. Note: You can run doubleTwist on Windows or Mac, and here we take a look at the Windows version. Install & Setup doubleTwist Download and install doubleTwist using the defaults in the wizard… Installation takes several moments and you’ll see the progress while it finishes up. After installation is complete, sign up for an account if you don’t already have one. If you do have an account you can login right away. Enter in your username, email address, and password then click Sign Up.   You’ll get an confirmation email and need to activate the account before you can sign in. Once you’re all signed up, launch doubleTwist and you’ll be ready to start using it. doubleTwist Music The default music store is Amazon MP3 store which might appeal to those of you who are tired of the iTunes music store. A lot of times the music is cheaper and available at higher bit rates. You can start searching for music in the Amazon Music Store and previewing songs. To purchase anything though you will need to sign into your Amazon account.   Under Playlists it allows you to import your playlists from iTunes and Windows Media Player, which is a handy feature if you don’t want to set them up again. Of course you can play your songs through the music player on your desktop. Devices One of the coolest things about doubleTwist is that it supports a lot of different portable media devices including iPod, BlackBerry, Windows Mobile, Android, PSP, Smartphones, and much more. Unfortunately for Zune users…there isn’t any support for the Zune of Zune HD yet. Here we have a Creative Zen attached and can sync songs, pictures, and podcasts. An HTC-S620 Smartphone running Windows Mobile… Even a simple USB drive will be recognized and you can transfer your media to it as well.   Podcasts Finding your favorite audio and video podcasts is easy with the search feature. You can easily manage and subscribe to podcasts in the subscriptions section.   You can watch the video podcasts directly in doubleTwist. Sharing Media Also you can share digital media with your friends or add it to Flickr and YouTube. You can send any pictures, videos, or music in your library to other people by dragging it over. You can email users individually… Or access contacts from your Gmail and Yahoo accounts. There is a limit to how much you can send of video podcasts… only the first 10 minutes. The person you send it to will get a link in their email that points to your My Feed page on the doubleTwist site.   There they can access the media you sent…in this example it’s a video podcast but you can share any media. Other Features Under My Profile you can change your avatar and personal information.   In Preferences you can choose where media is stored, its startup actions, podcast subscriptions, and manage device syncing. Conclusion It’s still in beta stage so expect some bugs, but overall doubleTwist is a solid media player that is easy to use with a clean interface. It’s simple and doesn’t try to do too much so is fairly easy on system resources. The main annoyance is it tries to catalog all of your media out of the box. Which may be alright for some users with smaller media collections, but very irritating to advanced users with large collections. Also there is currently no support for the Zune, but according to their forums, it’s on the way. At the time of this writing it’s in public beta and can be downloaded for XP, Vista, Windows 7 (32 & 64 bit), and Mac OSX. If you’re looking for an iTunes alternative that works with several different portable devices, you might want to give DoubleTwist a try. Download DoubleTwist Public Beta See If Your Media Device is Supported by doubleTwist Similar Articles Productive Geek Tips MusicBee is a Fast and Powerful Music ManagerAvoid the Apple QuickTime Bloat with QT LiteBeginner Geek: Set Default Programs in Windows 7 and VistaBeginner Geeks: OpenOffice is a Free Cross Platform Alternative to MS OfficeManage Devices the Easy Way with Device Stage in Windows 7 TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 PCmover Professional Play Music in Chrome by Simply Dragging a File 15 Great Illustrations by Chow Hon Lam Easily Sync Files & Folders with Friends & Family Amazon Free Kindle for PC Download Stretch popurls.com with a Stylish Script (Firefox) OldTvShows.org – Find episodes of Hitchcock, Soaps, Game Shows and more

  Read the article

• Recent Innovations to ILOM

  - by B.Koch

  by Josh Rosen If you are wondering how Oracle can make some of the most advanced, reliable, and fault tolerant servers on the market, look no further than Oracle Integrated Lights Out Manager or ILOM.  We build ILOM into every server we create, from Oracle x86 Systems such as X3-2 to the SPARC T-Series family. Oracle ILOM is an embedded service processor, but it's really more than that.  It's a computer within a computer.  It's smart, it's tightly integrated into all aspects of the server's operation, and it's a big reason why Oracle servers are used for some of the most mission-critical workloads out there. To understand the value of ILOM, there is no better place to start than its fault management capability.  We have taken the sophisticated fault management architecture from Solaris, developed and refined over a decade, and built it into each and every ILOM. ILOM detects a potential issue at its earliest stage, watching low-level sensors.   If the root cause of a problem is not clear from a single error reading, ILOM will look for other clues and combine multiple pieces of information to correctly identify a failing component. ILOM provides peace of mind. We tailor our fault management for each new server platform that we produce.  You can rest assured that it's always actively keeping the server healthy.  And if there is a problem, you can be confident it will let you know by sending you a notification by e-mail or trap. We also heard IT managers tell us they needed a Ph.D. in computer engineering to manage today's servers. It doesn't have to be that way.  Thanks to the latest innovations to Oracle ILOM, we present hardware inventory and status in way that makes sense – to anyone.  Green means everything is healthy and red means something is wrong.  When a component needs to be replaced a clear message indicates where the problem is and points you at a knowledge article about that problem.  It's that simple. Simpler management and simple interfaces mean reduced complexity and lower costs to manage.  And we know that's really important. ILOM does all this while also providing advanced service processor features you depend on for managing enterprise class systems.  You can remotely control the server power, interact with a virtual video console for the server, and mount media on the server remotely.  There is no need to spend money on a KVM switch to get this functionality. And when people hear how advanced ILOM is, they can't believe ILOM is free.  All features are enabled and included with each Oracle server that you buy.  There are no advanced licenses you need to purchase or features to unlock. Configuring ILOM has also never been easier.  It is now possible to configure almost all aspects of the server directly from ILOM.  This includes changing BIOS settings, persistently modifying boot order, and optimizing power settings -- all directly from ILOM. But Oracle's innovation does not stop with ILOM.  Oracle has engineered Oracle Enterprise Manager Ops Center to integrate directly with ILOM, providing centralized management across all of our servers. Ops Center will discover each of your Oracle servers over the network by searching for ILOMs.  When it finds one, it knows how to communicate with ILOM to monitoring and configure that server from application to disk. Since every server that Oracle produces, from x86 Systems to SPARC T-Series up and down the line, comes with Oracle ILOM, you can manage all Oracle servers in the same way.  And while all of our servers may have different components on the inside, each with their specialized functions, the way you integrate them and the way you monitor and manage them is exactly the same. Oracle ILOM is state-of-art.  If you are looking for a server that make systems management simple and is easy to integrate and maintain, check out the latest advances to Oracle ILOM. Josh Rosen is a Principal Product Manager at Oracle and previously spent more than a decade as a developer and architect of system management software. Josh has worked on system management for many of Oracle's hardware products ranging from the earliest blade systems to the latest Oracle x86 servers.

  Read the article

• Weekend With #iPad

  - by andrewbrust

  Saturday morning, I got up, got dressed and took a 7-minute walk up to the Apple Store in New York’s Meatpacking District to pick up my reserved iPad.  This precinct, which borders Greenwich Village (where I live and grew up) was, when I was a kid, a very industrial and smelly neighborhood during the day  and a rough neighborhood at night.  So imagine my sense of irony as I walked up Hudson Street towards 14th Street, to go wait in line with a bunch of hipsters to buy an iPad on launch day. Numerous blue T-shirt-clad Apple store workers were on hand to check people in to the line specifically identified for people who had reserved an iPad.  Others workers passed out water and all of them, I kid you not, applauded people as they got their chance to go into the store and buy their devices.  They also cheered people and yelled “congratulations” as they left.  The event had all the charm of a mass wedding officiated by Reverend Sung Myung Moon.  Once inside, a nice dude named Trey, with lots of tattoos on his calves, helped me and I acquired my device in short order.  Another guy helped me activate the device, which was comical, because that has to be done through iTunes, which I hadn’t logged into in a while. Turns out my user id was my email address from the company I sold 5 1/2 years ago.  Who knew?  Regardless, I go the device working, packed up and left the store, shuddering as I was cheered and congratulated.  By this time (about 10:30am) the line for reserved units and even walk-ins, was gone.  The iPhone launch this was not. As much as I detested the Apple Store experience, I must say the device is really nice.  the screen is bright, the colors are bold, and the experience is ultra-smooth.  I quickly tested Safari, YouTube, Google Maps, and then installed a few apps, including the New York Times Editors’ Choice and a couple of Twitter clients. Some initial raves: Google Maps and Street View on the iPad is just amazing.  The screen is full-size like a PC or Mac, but it’s right in front of you and responding to taps and flicks and pinches and it’s really engulfing.  Video and photos are really nice on this device, despite the fact that 16:9 and anamorphic aspect ration content is letter boxed.  It still looks amazing.  And apps that are designed especially for the iPad, including The Weather Channel and Gilt and Kayak just look stunning.  The richness, the friendly layout, the finger-friendly UIs, and the satisfaction of not having a keyboard between you and the information you’re managing, while you sit on a couch or an easy chair, is just really a beautiful thing.  The mere experience of seeing these apps’ splash screens causes a shiver and Goosebumps.  Truly.  The iPad is not a desktop machine, and it’s not pocket device.  That doesn’t mean it’s useless though.  It’s the perfect “couchtop” computer. Now some downsides: the WiFi radio seems a bit flakey.  More than a few times, I have had to toggle the WiFi off and back on to get it to connect properly.  Worse yet, the iPad is totally bamboozled by the fact that I have four WiFi access points in my house, each with the same SSID.  My laptops are smart enough to roam from one to the other, but the iPad seems to maintain an affinity for the downstairs access point, even if I’m turning it on two flights up.  Telling the iPad to “forget” my WiFi network and then re-associate with it doesn’t help. More downers: as you might expect, there are far more applications developed for the iPhone than the iPad.  And although iPhone apps run on the iPad, that provides about the same experience as watching standard def on a big HD flat panel, complete with the lousy choice of thick black borders or zooming the picture in to fill the screen.  And speaking of iPhone Apps, I can’t get the Sonos one to work.  Ideally, they’d have a dedicated iPad app and it would work on the first try.  And the iPad is just as bad as any netbook when it comes to being a magnet for fingerprints.  The lack of multi-tasking is quite painful too – truly, I don’t mind if only one app can be active at once, but the lack of ability to switch between apps, and the requirement to return to the home screen and re-launch a previous app to switch back, is already old and I’ve had the thing less than 48 hours. These are just initial impressions.  I’ll have a fuller analysis soon, after I’ve had some more break-in time with my new toy.  I’ll be thinking not just about the iPad and iPhone but also about Android, the 2.1 update for which was pushed to my Droid today, and Windows Phone 7, whose “hub” concept I now understand the value of.  This has been a great year for alternative computing devices, and I see no net downside for Apple, Google or Microsoft.  Exciting times.

  Read the article

• Using the Static Code Analysis feature of Visual Studio (Premium/Ultimate) to find memory leakage problems

  - by terje

  Memory for managed code is handled by the garbage collector, but if you use any kind of unmanaged code, like native resources of any kind, open files, streams and window handles, your application may leak memory if these are not properly handled.  To handle such resources the classes that own these in your application should implement the IDisposable interface, and preferably implement it according to the pattern described for that interface. When you suspect a memory leak, the immediate impulse would be to start up a memory profiler and start digging into that.   However, before you follow that impulse, do a Static Code Analysis run with a ruleset tuned to finding possible memory leaks in your code.  If you get any warnings from this, fix them before you go on with the profiling. How to use a ruleset In Visual Studio 2010 (Premium and Ultimate editions) you can define your own rulesets containing a list of Static Code Analysis checks.   I have defined the memory checks as shown in the lists below as ruleset files, which can be downloaded – see bottom of this post.  When you get them, you can easily attach them to every project in your solution using the Solution Properties dialog. Right click the solution, and choose Properties at the bottom, or use the Analyze menu and choose “Configure Code Analysis for Solution”: In this dialog you can now choose the Memorycheck ruleset for every project you want to investigate.  Pressing Apply or Ok opens every project file and changes the projects code analysis ruleset to the one we have specified here. How to define your own ruleset  (skip this if you just download my predefined rulesets) If you want to define the ruleset yourself, open the properties on any project, choose Code Analysis tab near the bottom, choose any ruleset in the drop box and press Open Clear out all the rules by selecting “Source Rule Sets” in the Group By box, and unselect the box Change the Group By box to ID, and select the checks you want to include from the lists below. Note that you can change the action for each check to either warning, error or none, none being the same as unchecking the check.   Now go to the properties window and set a new name and description for your ruleset. Then save (File/Save as) the ruleset using the new name as its name, and use it for your projects as detailed above. It can also be wise to add the ruleset to your solution as a solution item. That way it’s there if you want to enable Code Analysis in some of your TFS builds.   Running the code analysis In Visual Studio 2010 you can either do your code analysis project by project using the context menu in the solution explorer and choose “Run Code Analysis”, you can define a new solution configuration, call it for example Debug (Code Analysis), in for each project here enable the Enable Code Analysis on Build   In Visual Studio Dev-11 it is all much simpler, just go to the Solution root in the Solution explorer, right click and choose “Run code analysis on solution”.     The ruleset checks The following list is the essential and critical memory checks.  CheckID Message Can be ignored ? Link to description with fix suggestions CA1001 Types that own disposable fields should be disposable No  http://msdn.microsoft.com/en-us/library/ms182172.aspx CA1049 Types that own native resources should be disposable Only if the pointers assumed to point to unmanaged resources point to something else  http://msdn.microsoft.com/en-us/library/ms182173.aspx CA1063 Implement IDisposable correctly No  http://msdn.microsoft.com/en-us/library/ms244737.aspx CA2000 Dispose objects before losing scope No  http://msdn.microsoft.com/en-us/library/ms182289.aspx CA2115 1 Call GC.KeepAlive when using native resources See description  http://msdn.microsoft.com/en-us/library/ms182300.aspx CA2213 Disposable fields should be disposed If you are not responsible for release, of if Dispose occurs at deeper level  http://msdn.microsoft.com/en-us/library/ms182328.aspx CA2215 Dispose methods should call base class dispose Only if call to base happens at deeper calling level  http://msdn.microsoft.com/en-us/library/ms182330.aspx CA2216 Disposable types should declare a finalizer Only if type does not implement IDisposable for the purpose of releasing unmanaged resources  http://msdn.microsoft.com/en-us/library/ms182329.aspx CA2220 Finalizers should call base class finalizers No  http://msdn.microsoft.com/en-us/library/ms182341.aspx Notes: 1) Does not result in memory leak, but may cause the application to crash   The list below is a set of optional checks that may be enabled for your ruleset, because the issues these points too often happen as a result of attempting to fix up the warnings from the first set.   ID Message Type of fault Can be ignored ? Link to description with fix suggestions CA1060 Move P/invokes to NativeMethods class Security No http://msdn.microsoft.com/en-us/library/ms182161.aspx CA1816 Call GC.SuppressFinalize correctly Performance Sometimes, see description http://msdn.microsoft.com/en-us/library/ms182269.aspx CA1821 Remove empty finalizers Performance No http://msdn.microsoft.com/en-us/library/bb264476.aspx CA2004 Remove calls to GC.KeepAlive Performance and maintainability Only if not technically correct to convert to SafeHandle http://msdn.microsoft.com/en-us/library/ms182293.aspx CA2006 Use SafeHandle to encapsulate native resources Security No http://msdn.microsoft.com/en-us/library/ms182294.aspx CA2202 Do not dispose of objects multiple times Exception (System.ObjectDisposedException) No http://msdn.microsoft.com/en-us/library/ms182334.aspx CA2205 Use managed equivalents of Win32 API Maintainability and complexity Only if the replace doesn’t provide needed functionality http://msdn.microsoft.com/en-us/library/ms182365.aspx CA2221 Finalizers should be protected Incorrect implementation, only possible in MSIL coding No http://msdn.microsoft.com/en-us/library/ms182340.aspx   Downloadable ruleset definitions I have defined three rulesets, one called Inmeta.Memorycheck with the rules in the first list above, and Inmeta.Memorycheck.Optionals containing the rules in the second list, and the last one called Inmeta.Memorycheck.All containing the sum of the two first ones.  All three rulesets can be found in the  zip archive  “Inmeta.Memorycheck” downloadable from here.   Links to some other resources relevant to Static Code Analysis MSDN Magazine Article by Mickey Gousset on Static Code Analysis in VS2010 MSDN :  Analyzing Managed Code Quality by Using Code Analysis, root of the documentation for this Preventing generated code from being analyzed using attributes Online training course on Using Code Analysis with VS2010 Blogpost by Tatham Oddie on custom code analysis rules How to write custom rules, from Microsoft Code Analysis Team Blog Microsoft Code Analysis Team Blog

  Read the article

• Personal search – the future of search

  - by jamiet

  [Four months ago I wrote a meandering blog post on another blogging site entitled Personal search – the future of search. The points I made therein are becoming more relevant to what I'm reading about and hoping to get involved in in the future so I'm re-posting here to a wider audience to hopefully get some more feedback and guage reaction to it. This has been prompted by the book Pull by David Siegel that is forming my current holiday reading (recommended to me by a commenter on my previous post Interesting things – Twitter annotations and your phone as a web server) and in particular by Siegel's notion of us all in the future having a personal online data vault.] My one-time colleague Paul Dawson recently wrote an article called The Future of Search and in it he proposed some interesting ideas. Some choice quotes: The growth of Chinese search giant Baidu is an indicator that fully localised and tailored content and offerings have great traction with local audiences This trend is already driving an increase in the use of specialist searches … Look at how Farecast is now integrated into Bing for example, or how Flightstats is now integrated into Google. Search does not necessarily have to begin with a keyword, but could start instead with a click or a touch. Take a look at Retrievr. Start drawing a picture in the box and see what happens. This is certainly search without the need for typing in keywords search technology has advanced greatly in recent years. The recent launch of Microsoft Live Labs’ Pivot has given us a taste of what we can expect to see in the future This really got me thinking about where search might go in the future and as my mind wandered I realised that as the amount of data that we collect about ourselves increases so too will the need and the desire to search it. The amount of electronic data that exists about each and every person is increasing and in the near future I fully expect that we are going to be able to store personal data such as: A history of our location (in fact Google Latitude already offers this facility) Recordings of all our phone conversations Health information history (weight, blood pressure etc…) Energy usage Spending history What films we watch, what radio stations we listen to Voting history Of course, most of this stuff is already stored somewhere but crucially we don’t have easy access to it. My utilities supplier knows how much electricity I’m using but if I want to know for myself I have to go and dig through my statements (assuming I have kept them). Similarly my doctor probably has ready access to all of my health records, my bank knows exactly what I have spent my money on, my cable supplier knows what I watch on TV and my mobile phone supplier probably knows exactly where I am and where I’ve been for the past few years. Strange then that none of this electronic information is available to me in a way that I can really make use of it; after all, its MY information. Its MY data. I created it. That is set to change. As technologies mature and customers become more technically cognizant they will demand more access to the data that companies hold about them. The companies themselves will realise the benefit that they derive from giving users what they want and will embrace ways of providing it. As a result the amount of data that we store about ourselves is going to increase exponentially and the desire to search and derive value from that data is going to grow with it; we are about to enter the era of the “personal datastore” and we will want, and need, to search through it in order to make sense of it all. Its interesting then that today when we think of search we think of search engines and yet in these personal datastores we’re referring to data that search engines can’t touch because WE own it and we (hopefully) choose to keep it private. Someone, I know not who, is going to lead in this space by making it easy for us to search our data and retrieve information that we have either forgotten or maybe didn’t even know in the first place. We will learn new things about ourselves and about our habits; we will share these findings with whomever we choose; we will compare what we discover with others; we will collaborate for mutual benefit and, most of all, we will educate ourselves as to how to live our lives better. Search will be the means to that end, it will enable us to make sense of the wealth of information that we will collect day in day out. The future of search is personal, why would we be interested in anything else? @Jamiet Share this post: email it! | bookmark it! | digg it! | reddit! | kick it! | live it!

  Read the article

• ASP.NET Web API - Screencast series Part 4: Paging and Querying

  - by Jon Galloway

  We're continuing a six part series on ASP.NET Web API that accompanies the getting started screencast series. This is an introductory screencast series that walks through from File / New Project to some more advanced scenarios like Custom Validation and Authorization. The screencast videos are all short (3-5 minutes) and the sample code for the series is both available for download and browsable online. I did the screencasts, but the samples were written by the ASP.NET Web API team. In Part 1 we looked at what ASP.NET Web API is, why you'd care, did the File / New Project thing, and did some basic HTTP testing using browser F12 developer tools. In Part 2 we started to build up a sample that returns data from a repository in JSON format via GET methods. In Part 3, we modified data on the server using DELETE and POST methods. In Part 4, we'll extend on our simple querying methods form Part 2, adding in support for paging and querying. This part shows two approaches to querying data (paging really just being a specific querying case) - you can do it yourself using parameters passed in via querystring (as well as headers, other route parameters, cookies, etc.). You're welcome to do that if you'd like. What I think is more interesting here is that Web API actions that return IQueryable automatically support OData query syntax, making it really easy to support some common query use cases like paging and filtering. A few important things to note: This is just support for OData query syntax - you're not getting back data in OData format. The screencast demonstrates this by showing the GET methods are continuing to return the same JSON they did previously. So you don't have to "buy in" to the whole OData thing, you're just able to use the query syntax if you'd like. This isn't full OData query support - full OData query syntax includes a lot of operations and features - but it is a pretty good subset: filter, orderby, skip, and top. All you have to do to enable this OData query syntax is return an IQueryable rather than an IEnumerable. Often, that could be as simple as using the AsQueryable() extension method on your IEnumerable. Query composition support lets you layer queries intelligently. If, for instance, you had an action that showed products by category using a query in your repository, you could also support paging on top of that. The result is an expression tree that's evaluated on-demand and includes both the Web API query and the underlying query. So with all those bullet points and big words, you'd think this would be hard to hook up. Nope, all I did was change the return type from IEnumerable<Comment> to IQueryable<Comment> and convert the Get() method's IEnumerable result using the .AsQueryable() extension method. public IQueryable<Comment> GetComments() { return repository.Get().AsQueryable(); } You still need to build up the query to provide the $top and $skip on the client, but you'd need to do that regardless. Here's how that looks: $(function () { //--------------------------------------------------------- // Using Queryable to page //--------------------------------------------------------- $("#getCommentsQueryable").click(function () { viewModel.comments([]); var pageSize = $('#pageSize').val(); var pageIndex = $('#pageIndex').val(); var url = "/api/comments?$top=" + pageSize + '&$skip=' + (pageIndex * pageSize); $.getJSON(url, function (data) { // Update the Knockout model (and thus the UI) with the comments received back // from the Web API call. viewModel.comments(data); }); return false; }); }); And the neat thing is that - without any modification to our server-side code - we can modify the above jQuery call to request the comments be sorted by author: $(function () { //--------------------------------------------------------- // Using Queryable to page //--------------------------------------------------------- $("#getCommentsQueryable").click(function () { viewModel.comments([]); var pageSize = $('#pageSize').val(); var pageIndex = $('#pageIndex').val(); var url = "/api/comments?$top=" + pageSize + '&$skip=' + (pageIndex * pageSize) + '&$orderby=Author'; $.getJSON(url, function (data) { // Update the Knockout model (and thus the UI) with the comments received back // from the Web API call. viewModel.comments(data); }); return false; }); }); So if you want to make use of OData query syntax, you can. If you don't like it, you're free to hook up your filtering and paging however you think is best. Neat. In Part 5, we'll add on support for Data Annotation based validation using an Action Filter.

  Read the article

• Data Mining Resources

  - by Dejan Sarka

  There are many different types of analyses, each one with its own pros and cons. Relational reports have a predefined structure, and end users cannot change it. They are simple to use for end users. Reports can use real-time data and snapshots of data to show the state of a report at specific points in time. One of the drawbacks is that report authoring is limited to IT pros and advanced users. Any kind of dynamic restructuring is very limited. If real-time data is used for a report, the report has a negative impact on the performance of the source system. Processing of the reports might be slow because the data comes from relational database management systems, which are not optimized for reporting only. If you create a semantic model of your data, your end users can create ad-hoc report structures. However, the development is more complex because a developer is needed to create these semantic models. For OLAP, you typically use specialized database management systems. You get lightning speed of analyses. End users can use rich and thin clients to interactively change the structure of the report. Typically, they do it graphically. However, the development of an OLAP system is many times quite complex. It involves the preparation and maintenance of an enterprise data warehouse and OLAP cubes. In order to exploit the possibility of real-time restructuring of reports, the users must be both active and educated. The data is usually stale, as it is loaded into data warehouses and OLAP cubes with a scheduled process. With data mining, a structure is not selected in advance; it searches for the structure. As a result, data mining can give you the most valuable results because you can discover patterns you did not expect. A data mining model structure is limited only by the attributes that you use to train the model. One of the drawbacks is that a lot of knowledge is needed for a successful data mining project. End users have to understand the results. Subject matter experts and IT professionals need to understand business problem thoroughly. The development might be sometimes even more complex than the development of OLAP cubes. Each type of analysis has its own place in an enterprise system. SQL Server has tools for all kinds of analyses. However, data mining is the most advanced way of analyzing the data; this is the “I” in BI. In order to get the most out of it, you need to learn quite a lot. In this blog post, I am gathering together resources for learning, including forthcoming events. Books Multiple authors: SQL Server MVP Deep Dives – I wrote an introductory data mining chapter there. Erik Veerman, Teo Lachev and Dejan Sarka: MCTS Self-Paced Training Kit (Exam 70-448): Microsoft SQL Server 2008 - Business Intelligence Development and Maintenance – you can find a good overview of a complete BI solution, including data mining, in this book. Jamie MacLennan, ZhaoHui Tang, and Bogdan Crivat: Data Mining with Microsoft SQL Server 2008 – can’t miss this book if you want to mine your data with SQL Server tools. Michael Berry, Gordon Linoff: Mastering Data Mining: The Art and Science of Customer Relationship Management – data mining from both, business and technical perspective. Dorian Pyle: Data Preparation for Data Mining – an in-depth book about data preparation. Thomas and Ronald Wonnacott: Introductory Statistics – if you thought that you could get away without statistics, then you are not serious about data mining. Jiawei Han and Micheline Kamber: Data Mining Concepts and Techniques – in-depth explanation of the most popular data mining algorithms. Michael Berry and Gordon Linoff: Data Mining Techniques – another book that explains data mining algorithms, more fro a business perspective. Paolo Guidici: Applied Data Mining – very mathematical book, only if you enjoy statistics and mathematics in general. Forthcoming presentations I am presenting two data mining related sessions during the PASS Summit in Charlotte, NC: Wednesday, October 16th, 2013 - Fraud Detection: Notes from the Field – I am showing how to use data mining for a specific business problem. The presentation is based on real-life projects. Friday, October 18th: Excel 2013 Advanced Analytics – I am focusing on Excel Data Mining Add-ins, and how to use them together with Power Pivot and other add-ins. This is the most you can get out of Excel. Sinergija 2013, Belgrade, Serbia Tuesday, October 22nd: Excel 2013 Analytics to the Max – another presentation focusing on the most advanced analytics you can get in Excel. SQL Rally Amsterdam, Netherlands Thursday, November 7th: Advanced Analytics in Excel 2013 – and again I am presenting about data mining in Excel. Why three different titles for the same presentation? I don’t know, I guess I forgot the name I proposed every time right after I sent the proposal. Courses Data Mining with SQL Server 2012 – I wrote a 3-day course for SolidQ. If you are interested in this course, which I could also deliver in a shorter seminar way, you can contact your closes SolidQ subsidiary, or, of course, me directly on addresses [email protected] or [email protected]. This course could also complement the existing courseware portfolio of training providers, which are welcome to contact me as well. OK, now you know: no more excuses, start learning data mining, get the most out of your data

  Read the article

• What Did You Do? is a Bad Question

  - by Ajarn Mark Caldwell

  Brian Moran (blog | Twitter) did a great presentation today for the PASS Professional Development Virtual Chapter on The Art of Questions.  One of the points that Brian made was that there are good questions and bad (or at least not-as-good) questions.  Good questions tend to open-up the conversation and engender positive reactions (perhaps even trust and respect) between the participants; and bad questions tend to close-down a conversation either through the narrow list of possible responses (e.g. strictly Yes/No) or through the negative reactions they can produce.  And this explains why I so frequently had problems troubleshooting real-time problems with users in the past.  I’ll explain that in more detail below, but before we go on, let me recommend that you watch the recording of Brian’s presentation to learn why the question Why is often problematic in the U.S. and yet we so often resort to it. For a short portion (3 years) of my career, I taught basic computer skills and Office applications in an adult vocational school, and this gave me ample opportunity to do live troubleshooting of user challenges with computers.  And like many people who ended up in computer related jobs, I also have had numerous times where I was called upon by less computer-savvy individuals to help them with some challenge they were having, whether it was part of my job or not.  One of the things that I noticed, especially during my time as a teacher, was that when I was helping somebody, typically the first question I would ask them was, “What did you do?”  This seemed to me like a good way to start my detective work trying to figure out what happened, what went wrong, how to fix it, and how to help the person avoid it again in the future.  I always asked it in a polite tone of voice as I was just trying to gather the facts before diving in deeper.  However; 99.999% of the time, I always got the same answer, “Nothing!”  For a long time this frustrated me because (remember I’m in detective mode at that point) I knew it could not possibly be true.  They HAD to have done SOMETHING…just tell me what were the last actions you took before this problem presented itself.  But no, they always stuck with “Nothing”.  At which point, with frustration growing, and not a little bit of disdain for their lack of helpfulness, I would usually ask them to move aside while I took over their machine and got them out of whatever they had gotten themselves into.  After a while I just grew used to the fact that this was the answer I would usually receive, but I always kept asking because for the .001% of the people who would actually tell me, I could then help them understand what went wrong and how to avoid it in the future. Now, after hearing Brian’s talk, I understand what the problem was.  Even though I meant to just be in an information gathering mode, the words I was using, “What did YOU do?” have such a strong negative connotation that people would instinctively go into defense-mode and stop sharing information that might make them look bad.  Many of them probably were not even consciously aware that they had gone on the defensive, but the self-preservation instinct, especially self-preservation of the ego, is so strong that people would end up there without even realizing it. So, if “What did you do” is a bad question, what would have been better?  Well, one suggestion that Brian makes in his talk is something along the lines of, “Can you tell me what led up to this?” or “what was happening on the computer right before this came up?”  It’s subtle, but the point is to take the focus off of the person and their behavior; instead depersonalizing it and talk about events from more of a 3rd-party observer point of view.  With this approach, people will be more likely to talk about what the computer did and what they did in response to it without feeling the interrogation spotlight is on them.  They are also more likely to mention other events that occurred around the same time that may or may not be related, but which could certainly help you troubleshoot a larger problem if it is not just user actions.  And that is the ultimate goal of your asking the questions.  So yes, it does matter how you ask the question; and there are such things as good questions and bad questions.  Excellent topic Brian!  Thanks for getting the thinking gears churning! (Cross-posted to the Professional Development Virtual Chapter blog.)

  Read the article

• Create Orchard Module in a Separate Project

  - by Steve Michelotti

  The Orchard Project is a new OOS Microsoft project that is being developed up on CodePlex. From the Orchard home page on CodePlex, it states “Orchard project is focused on delivering a .NET-based CMS application that will allow users to rapidly create content-driven Websites, and an extensibility framework that will allow developers and customizers to provide additional functionality through modules and themes.” The Orchard Project site contains additional information including documentation and walkthroughs. The ability to create a composite solution based on a collection of modules is a compelling feature. In Orchard, these modules can just be created as simple MVC Areas or they can also be created inside of stand-alone web application projects.  The walkthrough for writing an Orchard module that is available on the Orchard site uses a simple Area that is created inside of the host application. It is based on the Orchard MIX presentation. This walkthrough does an effective job introducing various Orchard concepts such as hooking into the navigation system, theme/layout system, content types, and more.  However, creating an Orchard module in a separate project does not seem to be concisely documented anywhere. Orchard ships with several module OOTB that are in separate assemblies – but again, it’s not well documented how to get started building one from scratch. The following are the steps I took to successfully get an Orchard module in a separate project up and running. Step 1 – Download the OrchardIIS.zip file from the Orchard Release page. Unzip and open up the solution. Step 2 – Add your project to the solution. I named my project “Orchard.Widget” and used and “MVC 2 Empty Web Application” project type. Make sure you put the physical path inside the “Modules” sub-folder to the main project like this: At this point the solution should look like: Step 3 – Add assembly references to Orchard.dll and Orchard.Core.dll. Step 4 – Add a controller and view.  I’ll just create a Hello World controller and view. Notice I created the view as a partial view (*.ascx). Also add the [Themed] attribute to the top of the HomeController class just like the normal Orchard walk through shows it. Step 5 – Add Module.txt to the project root. The is a very important step. Orchard will not recognize your module without this text file present.  It can contain just the name of your module: name: Widget Step 6 – Add Routes.cs. Notice I’ve given an area name of “Orchard.Widget” on lines 26 and 33. 1: using System; 2: using System.Collections.Generic; 3: using System.Web.Mvc; 4: using System.Web.Routing; 5: using Orchard.Mvc.Routes; 6:   7: namespace Orchard.Widget 8: { 9: public class Routes : IRouteProvider 10: { 11: public void GetRoutes(ICollection<RouteDescriptor> routes) 12: { 13: foreach (var routeDescriptor in GetRoutes()) 14: { 15: routes.Add(routeDescriptor); 16: } 17: } 18:   19: public IEnumerable<RouteDescriptor> GetRoutes() 20: { 21: return new[] { 22: new RouteDescriptor { 23: Route = new Route( 24: "Widget/{controller}/{action}/{id}", 25: new RouteValueDictionary { 26: {"area", "Orchard.Widget"}, 27: {"controller", "Home"}, 28: {"action", "Index"}, 29: {"id", ""} 30: }, 31: new RouteValueDictionary(), 32: new RouteValueDictionary { 33: {"area", "Orchard.Widget"} 34: }, 35: new MvcRouteHandler()) 36: } 37: }; 38: } 39: } 40: } Step 7 – Add MainMenu.cs. This will make sure that an item appears in the main menu called “Widget” which points to the module. 1: using System; 2: using Orchard.UI.Navigation; 3:   4: namespace Orchard.Widget 5: { 6: public class MainMenu : INavigationProvider 7: { 8: public void GetNavigation(NavigationBuilder builder) 9: { 10: builder.Add(menu => menu.Add("Widget", item => item.Action("Index", "Home", new 11: { 12: area = "Orchard.Widget" 13: }))); 14: } 15:   16: public string MenuName 17: { 18: get { return "main"; } 19: } 20: } 21: } Step 8 – Clean up web.config. By default Visual Studio adds numerous sections to the web.config. The sections that can be removed are: appSettings, connectionStrings, authentication, membership, profile, and roleManager. Step 9 – Delete Global.asax. This project will ultimately be running from inside the Orchard host so this “sub-site” should not have its own Global.asax.   Now you’re ready the run the app.  When you first run it, the “Widget” menu item will appear in the main menu because of the MainMenu.cs file we added: We can then click the “Widget” link in the main menu to send us over to our view:   Packaging From start to finish, it’s a relatively painless experience but it could be better. For example, a Visual Studio project template that encapsulates aspects from this blog post would definitely make it a lot easier to get up and running with creating an Orchard module.  Another aspect I found interesting is that if you read the first paragraph of the walkthrough, it says, “You can also develop modules as separate projects, to be packaged and shared with other users of Orchard CMS (the packaging story is still to be defined, along with marketplaces for sharing modules).” In particular, I will be extremely curious to see how the “packaging story” evolves. The first thing that comes to mind for me is: what if we explored MvcContrib Portable Areas as a potential mechanism for this packaging? This would certainly make things easy since all artifacts (aspx, aspx, images, css, javascript) are all wrapped up into a single assembly. Granted, Orchard does have its own infrastructure for layouts and themes but it seems like integrating portable areas into this pipeline would not be a difficult undertaking. Maybe that’ll be the next research task. :)

  Read the article

• 2d tank movement and turret solution

  - by Phil

  Hi! I'm making a simple top-down tank game on the ipad where the user controls the movement of the tank with the left "joystick" and the rotation of the turret with the right one. I've spent several hours just trying to get it to work decently but now I turn to the pros :) I have two referencial objects, one for the movement and one for the rotation. The referencial objects always stay max two units away from the tank and I use them to tell the tank in what direction to move. I chose this approach to decouple movement and rotational behaviour from the raw input of the joysticks, I believe this will make it simpler to implement whatever behaviour I want for the tank. My problem is 1; the turret rotates the long way to the target. With this I mean that the target can be -5 degrees away in rotation and still it rotates 355 degrees instead of -5 degrees. I can't figure out why. The other problem is with the movement. It just doesn't feel right to have the tank turn while moving. I'd like to have a solution that would work as well for the AI as for the player. A blackbox function for the movement where the player only specifies in what direction it should move and it moves there under the constraints that are imposed on it. I am using the standard joystick class found in the Unity iPhone package. This is the code I'm using for the movement: public class TankFollow : MonoBehaviour { //Check angle difference and turn accordingly public GameObject followPoint; public float speed; public float turningSpeed; void Update() { transform.position = Vector3.Slerp(transform.position, followPoint.transform.position, speed * Time.deltaTime); //Calculate angle var forwardA = transform.forward; var forwardB = (followPoint.transform.position - transform.position); var angleA = Mathf.Atan2(forwardA.x, forwardA.z) * Mathf.Rad2Deg; var angleB = Mathf.Atan2(forwardB.x, forwardB.z) * Mathf.Rad2Deg; var angleDiff = Mathf.DeltaAngle(angleA, angleB); //print(angleDiff.ToString()); if (angleDiff > 5) { //Rotate to transform.Rotate(new Vector3(0, (-turningSpeed * Time.deltaTime),0)); //transform.rotation = new Quaternion(transform.rotation.x, transform.rotation.y + adjustment, transform.rotation.z, transform.rotation.w); } else if (angleDiff < 5) { transform.Rotate(new Vector3(0, (turningSpeed * Time.deltaTime),0)); //transform.rotation = new Quaternion(transform.rotation.x, transform.rotation.y + adjustment, transform.rotation.z, transform.rotation.w); } else { } transform.position = new Vector3(transform.position.x, 0, transform.position.z); } } And this is the code I'm using to rotate the turret: void LookAt() { var forwardA = -transform.right; var forwardB = (toLookAt.transform.position - transform.position); var angleA = Mathf.Atan2(forwardA.x, forwardA.z) * Mathf.Rad2Deg; var angleB = Mathf.Atan2(forwardB.x, forwardB.z) * Mathf.Rad2Deg; var angleDiff = Mathf.DeltaAngle(angleA, angleB); //print(angleDiff.ToString()); if (angleDiff - 180 > 1) { //Rotate to transform.Rotate(new Vector3(0, (turretSpeed * Time.deltaTime),0)); //transform.rotation = new Quaternion(transform.rotation.x, transform.rotation.y + adjustment, transform.rotation.z, transform.rotation.w); } else if (angleDiff - 180 < -1) { transform.Rotate(new Vector3(0, (-turretSpeed * Time.deltaTime),0)); //transform.rotation = new Quaternion(transform.rotation.x, transform.rotation.y + adjustment, transform.rotation.z, transform.rotation.w); print((angleDiff - 180).ToString()); } else { } } Since I want the turret reference point to turn in relation to the tank (when you rotate the body, the turret should follow and not stay locked on since it makes it impossible to control when you've got two thumbs to work with), I've made the TurretFollowPoint a child of the Turret object, which in turn is a child of the body. I'm thinking that I'm making it too difficult for myself with the reference points but I'm imagining that it's a good idea. Please be honest about this point. So I'll be grateful for any help I can get! I'm using Unity3d iPhone. Thanks!

  Read the article

• Meet our 2009 Oracle Graduates in South Africa

  - by anca.rosu

  Focusing on the broader Oracle community, Oracle South Africa initiated its first skills development programme in May 1988. Since its inception the programme has developed and improved and every year more graduates are taken on board. The Oracle Graduate Programme is made up of specific learning paths designed around customer, partner and Oracle specifications and is structured to meet the urgent skills requirements in the Oracle “economy”. The training programmes have a specific duration and incorporate both theoretical and practical application of Oracle product sets. It is aimed at creating: Meaningful employment for graduates; Learning opportunities for individuals within the organization so that career growth opportunities are exploited to the fullest; Capacity building for small enterprises which is aligned to Oracle’s Enterprise Development Programme Meet our five graduates who joined us in December 2008 and have spent over a year with us! Let’s get their initial feedback on the graduate programme and on their assignment to Jordan. Lector   On the Oracle Graduate Programme: “The Oracle Graduate Programme is an experience of a life time. I would not trade it for anything. It’s challenging and rewarding. I am proud and happy to be in an organization like Oracle” On the assignment in Jordan: "Friendly, welcoming people, world class instructors always willing to go the extra mile. What more can you ask for?"   Lungile On the Oracle Graduate Programme: “I joined Oracle as part of the graduate intake for pre-sales in order to develop my skills and knowledge. Working at Oracle has been an overwhelmingly positive experience as it has encouraged me to progress with my personal development. I am hugely grateful. It has been a great challenge and an awesome opportunity.” On the assignment to Jordan: “Going to Jordan was a great opportunity and the experience of a lifetime. The people were very welcoming and friendly. The culture was totally different from ours - the food, the clothes and the weather. It was an amazingly different experience to work from Sunday to Thursday with Friday and Saturday as the weekend.” Thabo On the Oracle Graduate Programme: “Life is an infinite learning path. I truly value growth. I believe for one to grow, one needs to be challenged to your full potential. The Oracle Graduate Programme offers real growth – and so much more.” On the assignment to Jordan: “I was amazed by the cultural differences. I now understood that to be part of the global community, I must embrace our similarities and understand our differences.”   Albeauty On the Oracle Graduate Programme: “Responsibility, dedication, focus and taking initiative … these are the key points I learned from Oracle. It is such an honour to finally be part of the Oracle family. The graduate programme itself was a great experience as I managed to learn how Oracle operates – it has been the highlight of my year. I believe that my hard work will assist in the growth of the company.” On the Jordan assignment: “A memory worth embracing. Going to Jordan was a great opportunity as I learned a lot with respect to integration between different cultures and getting to adapt to all things different. I, along with almost every other graduate, discovered that Oracle is far more than a database company. Now I know there is far more to the ‘Big Red’ name.” Emmanuel On the Oracle Graduate Programme: “The programme gave me invaluable exposure to the ICT sector and also provided an opportunity to travel, network and exchange ideas with others. The formal training helped me to improve my presentation skills and gave me a better understanding of business etiquette and communication.” On the assignment to Jordan: “It was my first trip abroad. It was a great chance to get to know each other. I had the opportunity to share ideas, share personal stuff as a team. We met experts who gave us superb training in Oracle Technologies. It was great.”   If you have any questions related to this article feel free to contact  [email protected].  You can find our job opportunities via http://campus.oracle.com.   Technorati Tags: Oracle community,South Africa,Graduate Programme,Jordan,Technologies

  Read the article

• Personal search – the future of search

  - by jamiet

  [Four months ago I wrote a meandering blog post on another blogging site entitled Personal search – the future of search. The points I made therein are becoming more relevant to what I'm reading about and hoping to get involved in in the future so I'm re-posting here to a wider audience to hopefully get some more feedback and guage reaction to it. This has been prompted by the book Pull by David Siegel that is forming my current holiday reading (recommended to me by a commenter on my previous post Interesting things – Twitter annotations and your phone as a web server) and in particular by Siegel's notion of us all in the future having a personal online data vault.] My one-time colleague Paul Dawson recently wrote an article called The Future of Search and in it he proposed some interesting ideas. Some choice quotes: The growth of Chinese search giant Baidu is an indicator that fully localised and tailored content and offerings have great traction with local audiences This trend is already driving an increase in the use of specialist searches … Look at how Farecast is now integrated into Bing for example, or how Flightstats is now integrated into Google. Search does not necessarily have to begin with a keyword, but could start instead with a click or a touch. Take a look at Retrievr. Start drawing a picture in the box and see what happens. This is certainly search without the need for typing in keywords search technology has advanced greatly in recent years. The recent launch of Microsoft Live Labs’ Pivot has given us a taste of what we can expect to see in the future This really got me thinking about where search might go in the future and as my mind wandered I realised that as the amount of data that we collect about ourselves increases so too will the need and the desire to search it. The amount of electronic data that exists about each and every person is increasing and in the near future I fully expect that we are going to be able to store personal data such as: A history of our location (in fact Google Latitude already offers this facility) Recordings of all our phone conversations Health information history (weight, blood pressure etc…) Energy usage Spending history What films we watch, what radio stations we listen to Voting history Of course, most of this stuff is already stored somewhere but crucially we don’t have easy access to it. My utilities supplier knows how much electricity I’m using but if I want to know for myself I have to go and dig through my statements (assuming I have kept them). Similarly my doctor probably has ready access to all of my health records, my bank knows exactly what I have spent my money on, my cable supplier knows what I watch on TV and my mobile phone supplier probably knows exactly where I am and where I’ve been for the past few years. Strange then that none of this electronic information is available to me in a way that I can really make use of it; after all, its MY information. Its MY data. I created it. That is set to change. As technologies mature and customers become more technically cognizant they will demand more access to the data that companies hold about them. The companies themselves will realise the benefit that they derive from giving users what they want and will embrace ways of providing it. As a result the amount of data that we store about ourselves is going to increase exponentially and the desire to search and derive value from that data is going to grow with it; we are about to enter the era of the “personal datastore” and we will want, and need, to search through it in order to make sense of it all. Its interesting then that today when we think of search we think of search engines and yet in these personal datastores we’re referring to data that search engines can’t touch because WE own it and we (hopefully) choose to keep it private. Someone, I know not who, is going to lead in this space by making it easy for us to search our data and retrieve information that we have either forgotten or maybe didn’t even know in the first place. We will learn new things about ourselves and about our habits; we will share these findings with whomever we choose; we will compare what we discover with others; we will collaborate for mutual benefit and, most of all, we will educate ourselves as to how to live our lives better. Search will be the means to that end, it will enable us to make sense of the wealth of information that we will collect day in day out. The future of search is personal, why would we be interested in anything else? @Jamiet Share this post: email it! | bookmark it! | digg it! | reddit! | kick it! | live it!

  Read the article

• Towards an F# .NET Reflector add-in

  - by CliveT

  When I had the opportunity to spent some time during Red Gate's recent "down tools" week on a project of my choice, the obvious project was an F# add-in for Reflector . To be honest, this was a bit of a misnomer as the amount of time in the designated week for coding was really less than three days, so it was always unlikely that very much progress would be made in such a small amount of time (and that certainly proved to be the case), but I did learn some things from the experiment. Like lots of problems, one useful technique is to take examples, get them to work, and then generalise to get something that works across the board. Unfortunately, I didn't have enough time to do the last stage. The obvious first step is to take a few function definitions, starting with the obvious hello world, moving on to a non-recursive function and finishing with the ubiquitous recursive Fibonacci function. let rec printMessage message  =     printfn  message let foo x  =    (x + 1) let rec fib x  =     if (x >= 2) then (fib (x - 1) + fib (x - 2)) else 1 The major problem in decompiling these simple functions is that Reflector has an in-memory object model that is designed to support object-oriented languages. In particular it has a return statement that allows function bodies to finish early. I used some of the in-built functionality to take the IL and produce an in-memory object model for the language, but then needed to write a transformer to push the return statements to the top of the tree to make it easy to render the code into a functional language. This tree transform works in some scenarios, but not in others where we simply regenerate code that looks more like CPS style. The next thing to get working was library level bindings of values where these values are calculated at runtime. let x = [1 ; 2 ; 3 ; 4] let y = List.map  (fun x -> foo x) x The way that this is translated into a set of classes for the underlying platform means that the code needs to follow references around, from the property exposing the calculated value to the class in which the code for generating the value is embedded. One of the strongest selling points of functional languages is the algebraic datatypes, which allow definitions via standard mathematical-style inductive definitions across the union cases. type Foo =     | Something of int     | Nothing type 'a Foo2 =     | Something2 of 'a     | Nothing2 Such a definition is compiled into a number of classes for the cases of the union, which all inherit from a class representing the type itself. It wasn't too hard to get such a de-compilation happening in the cases I tried. What did I learn from this? Firstly, that there are various bits of functionality inside Reflector that it would be useful for us to allow add-in writers to access. In particular, there are various implementations of the Visitor pattern which implement algorithms such as calculating the number of references for particular variables, and which perform various substitutions which could be more generally useful to add-in writers. I hope to do something about this at some point in the future. Secondly, when you transform a functional language into something that runs on top of an object-based platform, you lose some fidelity in the representation. The F# compiler leaves attributes in place so that tools can tell which classes represent classes from the source program and which are there for purposes of the implementation, allowing the decompiler to regenerate these constructs again. However, decompilation technology is a long way from being able to take unannotated IL and transform it into a program in a different language. For a simple function definition, like Fibonacci, I could write a simple static function and have it come out in F# as the same function, but it would be practically impossible to take a mass of class definitions and have a decompiler translate it automatically into an F# algebraic data type. What have we got out of this? Some data on the feasibility of implementing an F# decompiler inside Reflector, though it's hard at the moment to say how long this would take to do. The work we did is included the 6.5 EAP for Reflector that you can get from the EAP forum. All things considered though, it was a useful way to gain more familiarity with the process of writing an add-in and understand difficulties other add-in authors might experience. If you'd like to check out a video of Down Tools Week, click here.

  Read the article

• Getting to grips with the stack in nasm

  - by MarkPearl

  Today I spent a good part of my day getting to grips with the stack and nasm. After looking at my notes on nasm I think this is one area for the course I am doing they could focus more on… So here are some snippets I have put together that have helped me understand a little bit about the stack… Simplest example of the stack You will probably see examples like the following in circulation… these demonstrate the simplest use of the stack… org 0x100 bits 16 jmp main main: push 42h push 43h push 44h mov ah,2h ;set to display characters pop dx    ;get the first value int 21h   ;and display it pop dx    ;get 2nd value int 21h   ;and display it pop dx    ;get 3rd value int 21h   ;and display it int 20h The output from above code would be… DCB Decoupling code using “call” and “ret” This is great, but it oversimplifies what I want to use the stack for… I do not know if this goes against the grain of assembly programmers or not, but I want to write loosely coupled assembly code – and I want to use the stack as a mechanism for passing values into my decoupled code. In nasm we have the call and return instructions, which provides a mechanism for decoupling code, for example the following could be done… org 0x100 bits 16 jmp main ;---------------------------------------- displayChar: mov ah,2h mov dx,41h int 21h ret ;---------------------------------------- main: call displayChar int 20h   This would output the following to the console A So, it would seem that call and ret allow us to jump to segments of our code and then return back to the calling position – a form of segmenting the code into what we would called in higher order languages “functions” or “methods”. The only issue is, in higher order languages there is a way to pass parameters into the functions and return results. Because of the primitive nature of the call and ret instructions, this does not seem to be obvious. We could of course use the registers to pass values into the subroutine and set values coming out, but the problem with this is we… Have a limited number of registers Are threading our code with tight coupling (it would be hard to migrate methods outside of their intended use in a particular program to another one) With that in mind, I turn to the stack to provide a loosely coupled way of calling subroutines… First attempt with the Stack Initially I thought this would be simple… we could use code that looks as follows to achieve what I want… org 0x100 bits 16 jmp main ;---------------------------------------- displayChar: mov ah,2h pop dx int 21h ret ;---------------------------------------- main: push 41h call displayChar int 20h   However running this application does not give the desired result, I want an ‘A’ to be returned, and I am getting something totally different (you will to). Reading up on the call and ret instructions a discovery is made… they are pushing and popping things onto and off the stack as well… When the call instruction is executed, the current value of IP (the address of the instruction to follow) is pushed onto the stack, when ret is called, the last value on the stack is popped off into the IP register. In effect what the above code is doing is as follows with the stack… push 41h push current value of ip pop current value of ip to dx pop 41h to ip This is not what I want, I need to access the 41h that I pushed onto the stack, but the call value (which is necessary) is putting something in my way. So, what to do? Remember we have other registers we can use as well as a thing called indirect addressing… So, after some reading around, I came up with the following approach using indirect addressing… org 0x100 bits 16 jmp main ;---------------------------------------- displayChar: mov bp,sp mov ah,2h mov dx,[bp+2] int 21h ret ;---------------------------------------- main: push 41h call displayChar int 20h In essence, what I have done here is used a trick with the stack pointer… it goes as follows… Push 41 onto the stack Make the call to the function, which will push the IP register onto the stack and then jump to the displayChar label Move the value in the stack point to the bp register (sp currently points at IP register) Move the at the location of bp minus 2 bytes to dx (this is now the value 41h) display it, execute the ret instruction, which pops the ip value off the stack and goes back to the calling point This approach is still very raw, some further reading around shows that I should be pushing the value of bp onto the stack before replacing it with sp, but it is the starting thread to getting loosely coupled subroutines. Let’s see if you get what the following output would be? org 0x100 bits 16 jmp main ;---------------------------------------- displayChar: mov bp,sp mov ah,2h mov dx,[bp+4] int 21h mov dx,[bp+2] int 21h ret ;---------------------------------------- main: push 41h push 42h call displayChar int 20h The output is… AB Where to from here? If by any luck some assembly programmer comes along and see this code and notices that I have made some fundamental flaw in my logic… I would like to know, so please leave a comment… appreciate any feedback!

  Read the article

• Big Data – Various Learning Resources – How to Start with Big Data? – Day 20 of 21

  - by Pinal Dave

  In yesterday’s blog post we learned how to become a Data Scientist for Big Data. In this article we will go over various learning resources related to Big Data. In this series we have covered many of the most essential details about Big Data. At the beginning of this series, I have encouraged readers to send me questions. One of the most popular questions is - “I want to learn more about Big Data. Where can I learn it?” This is indeed a great question as there are plenty of resources out to learn about Big Data and it is indeed difficult to select on one resource to learn Big Data. Hence I decided to write here a few of the very important resources which are related to Big Data. Learn from Pluralsight Pluralsight is a global leader in high-quality online training for hardcore developers.  It has fantastic Big Data Courses and I started to learn about Big Data with the help of Pluralsight. Here are few of the courses which are directly related to Big Data. Big Data: The Big Picture Big Data Analytics with Tableau NoSQL: The Big Picture Understanding NoSQL Data Analysis Fundamentals with Tableau I encourage all of you start with this video course as they are fantastic fundamentals to learn Big Data. Learn from Apache Resources at Apache are single point the most authentic learning resources. If you want to learn fundamentals and go deep about every aspect of the Big Data, I believe you must understand various concepts in Apache’s library. I am pretty impressed with the documentation and I am personally referencing it every single day when I work with Big Data. I strongly encourage all of you to bookmark following all the links for authentic big data learning. Haddop - The Apache Hadoop® project develops open-source software for reliable, scalable, distributed computing. Ambari: A web-based tool for provisioning, managing, and monitoring Apache Hadoop clusters which include support for Hadoop HDFS, Hadoop MapReduce, Hive, HCatalog, HBase, ZooKeeper, Oozie, Pig and Sqoop. Ambari also provides a dashboard for viewing cluster health such as heat maps and ability to view MapReduce, Pig and Hive applications visually along with features to diagnose their performance characteristics in a user-friendly manner. Avro: A data serialization system. Cassandra: A scalable multi-master database with no single points of failure. Chukwa: A data collection system for managing large distributed systems. HBase: A scalable, distributed database that supports structured data storage for large tables. Hive: A data warehouse infrastructure that provides data summarization and ad hoc querying. Mahout: A Scalable machine learning and data mining library. Pig: A high-level data-flow language and execution framework for parallel computation. ZooKeeper: A high-performance coordination service for distributed applications. Learn from Vendors One of the biggest issues with about learning Big Data is setting up the environment. Every Big Data vendor has different environment request and there are lots of things require to set up Big Data framework. Many of the users do not start with Big Data as they are afraid about the resources required to set up framework as well as a time commitment. Here Hortonworks have created fantastic learning environment. They have created Sandbox with everything one person needs to learn Big Data and also have provided excellent tutoring along with it. Sandbox comes with a dozen hands-on tutorial that will guide you through the basics of Hadoop as well it contains the Hortonworks Data Platform. I think Hortonworks did a fantastic job building this Sandbox and Tutorial. Though there are plenty of different Big Data Vendors I have decided to list only Hortonworks due to their unique setup. Please leave a comment if there are any other such platform to learn Big Data. I will include them over here as well. Learn from Books There are indeed few good books out there which one can refer to learn Big Data. Here are few good books which I have read. I will update the list as I will learn more. Ethics of Big Data Balancing Risk and Innovation Big Data for Dummies Head First Data Analysis: A Learner’s Guide to Big Numbers, Statistics, and Good Decisions If you search on Amazon there are millions of the books but I think above three books are a great set of books and it will give you great ideas about Big Data. Once you go through above books, you will have a clear idea about what is the next step you should follow in this series. You will be capable enough to make the right decision for yourself. Tomorrow In tomorrow’s blog post we will wrap up this series of Big Data. Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: Big Data, PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, T SQL

  Read the article

• How does one find out which application is associated with an indicator icon?

  - by Amos Annoy

  It is trivial to do this in Ubuntu 10.04. The question is specific to Ubuntu 12.04. some pertinent references (src: answer to What is the difference between indicators and a system tray?: Here is the documentation for indicators: Application indicators | Ubuntu App Developer libindicate Reference Manual libappindicator Reference Manual also DesktopExperienceTeam/ApplicationIndicators - Ubuntu Wiki ref: How can the application that makes an indicator icon be identified? bookmark: How does one find out which application is associated with an indicator icon in Ubuntu 12.04? is a serious question for reasons & problems outlined below and for which a significant investment has been made and is necessary for remedial purposes. reviewing refs. to find an orchestrated resolution ... (an indicator ap. indicator maybe needed) This has nothing to do (does it?) with right click. How can an indicator's icon in Ubuntu 12.04 be matched with the program responsible for it's manifestation on the top panel? A list of running applications can include all processes using System Monitor. How is the correct matching process found for an indicator? How are the sub-indicator applications identified? These are the aps associated with the components of an indicators drop-down menu. (This was to be a separate question and quite naturally follows up the progression. It is included here as it is obvious there is no provisioning to track down offending either sub or indicator aps. easily.) (The examination of SM points out a rather poignant factor in the faster battery depletion and shortened run time - the ambient quiescent CPU rate in 12.04 is now well over 20% when previously, in 10.04, it was well under 10%, between 5% and 7%! - the huge inordinate cpu overhead originates from Xorg and compiz - after booting the system, only SM is run and All Processes are selected, sorting on %CPU - switching between Resources and Processes profiles the execution overhead problem - running another ap like gedit "Text Editor" briefly gives it CPU priority - going back to S&M several aps. are at the top of the list in order: gnome-system-monitor as expected, then: Xorg, compiz, unity-panel-service, hud-service, with dbus-daemon and kworker/x:y's mixed in with some expected daemons and background tasks like nm-applet - not only do Xorg and compiz require excessive CPU time but their entourage has to come along too! further exacerbating the problem - our compute bound tasks no longer work effectively in the field - reduced battery life, reduced CPU time for custom ap.s etc. - and all this precipitated from an examination of what is going on with the battery ap. indicator - this was and is not a flippant, rhetorical or idle musing but has consequences for the credible deployment of 12.04 to reduce the negative impact of its overhead in a production environment) (I have a problem with the battery indicator - it sometimes has % and other times hh:mm - it is necessary to know the ap. & v. to get more info on controlling same. ditto: There are issues with other indicator aps.: NM vs. iwlist/iwconfig conflict, BT ap. vs RF switch, Battery ap. w/ no suspend/sleep for poor battery runtime, ... the list goes on) Details from: How can I find Application Indicator ID's? suggests looking at: file:///usr/share/indicator-application/ordering-override.keyfile [Ordering Index Overrides] nm-applet=1 gnome-power-manager=2 ibus=3 gst-keyboard-xkb=4 gsd-keyboard-xkb=5 which solves the battery ap. identification, and presumably nm is NetworkManager for the rf icon, but the envelope, blue tooth and speaker indicator aps. are still a mystery. (Also, the ordering is not correlated.) Mind you, it was simple in the past to simply right click to get the About option to find the ap. & v. info. browsing around and about: file:///usr/share/indicator-application/ordering-override.keyfile examined: file:///usr/share/indicators file:///usr/share/indicators/messages/applications/ ... perhaps?/presumably? the information sought may be buried in file:///usr/share/indicators A reference in the comments was given to: What is the difference between indicators and a system tray? quoting from that source ... Unfortunately desktop indicators are not well documented yet: I couldn't find any specification doc ... Well ... the actual document https://wiki.ubuntu.com/DesktopExperienceTeam/ApplicationIndicators#Summary does not help much but it's existential information provides considerable insight ...

  Read the article

• Puppet: Making Windows Awesome Since 2011

  - by Robz / Fervent Coder

  Originally posted on: http://geekswithblogs.net/robz/archive/2014/08/07/puppet-making-windows-awesome-since-2011.aspxPuppet was one of the first configuration management (CM) tools to support Windows, way back in 2011. It has the heaviest investment on Windows infrastructure with 1/3 of the platform client development staff being Windows folks.  It appears that Microsoft believed an end state configuration tool like Puppet was the way forward, so much so that they cloned Puppet’s DSL (domain-specific language) in many ways and are calling it PowerShell DSC. Puppet Labs is pushing the envelope on Windows. Here are several things to note: Puppet x64 Ruby support for Windows coming in v3.7.0. An awesome ACL module (with order, SIDs and very granular control of permissions it is best of any CM). A wealth of modules that work with Windows on the Forge (and more on GitHub). Documentation solely for Windows folks - https://docs.puppetlabs.com/windows. Some of the common learning points with Puppet on Windows user are noted in this recent blog post. Microsoft OpenTech supports Puppet. Azure has the ability to deploy a Puppet Master (http://puppetlabs.com/solutions/microsoft). At Microsoft //Build 2014 in the Day 2 Keynote Puppet Labs CEO Luke Kanies co-presented with Mark Russonivich (http://channel9.msdn.com/Events/Build/2014/KEY02  fast forward to 19:30)! Puppet has a Visual Studio Plugin! It can be overwhelming learning a new tool like Puppet at first, but Puppet Labs has some resources to help you on that path. Take a look at the Learning VM, which has a quest-based learning tool. For real-time questions, feel free to drop onto #puppet on freenode.net (yes, some folks still use IRC) with questions, and #puppet-dev with thoughts/feedback on the language itself. You can subscribe to puppet-users / puppet-dev mailing lists. There is also ask.puppetlabs.com for questions and Server Fault if you want to go to a Stack Exchange site. There are books written on learning Puppet. There are even Puppet User Groups (PUGs) and other community resources! Puppet does take some time to learn, but with anything you need to learn, you need to weigh the benefits versus the ramp up time. I learned NHibernate once, it had a very high ramp time back then but was the only game on the street. Puppet’s ramp up time is considerably less than that. The advantage is that you are learning a DSL, and it can apply to multiple platforms (Linux, Windows, OS X, etc.) with the same Puppet resource constructs. As you learn Puppet you may wonder why it has a DSL instead of just leveraging the language of Ruby (or maybe this is one of those things that keeps you up wondering at night). I like the DSL over a small layer on top of Ruby. It allows the Puppet language to be portable and go more places. It makes you think about the end state of what you want to achieve in a declarative sense instead of in an imperative sense. You may also find that right now Puppet doesn’t run manifests (scripts) in order of the way resources are specified. This is the number one learning point for most folks. As a long time consternation of some folks about Puppet, manifest ordering was not possible in the past. In fact it might be why some other CMs exist! As of 3.3.0, Puppet can do manifest ordering, and it will be the default in Puppet 4. http://puppetlabs.com/blog/introducing-manifest-ordered-resources You may have caught earlier that I mentioned PowerShell DSC. But what about DSC? Shouldn’t that be what Windows users want to choose? Other CMs are integrating with DSC, will Puppet follow suit and integrate with DSC? The biggest concern that I have with DSC is it’s lack of visibility in fine-grained reporting of changes (which Puppet has). The other is that it is a very young Microsoft product (pre version 3, you know what they say :) ). I tried getting it working in December and ran into some issues. I’m hoping that newer releases are there that actually work, it does have some promising capabilities, it just doesn’t quite come up to the standard of something that should be used in production. In contrast Puppet is almost a ten year old language with an active community! It’s very stable, and when trusting your business to configuration management, you want something that has been around awhile and has been proven. Give DSC another couple of releases and you might see more folks integrating with it. That said there may be a future with DSC integration. Portability and fine-grained reporting of configuration changes are reasons to take a closer look at Puppet on Windows. Yes, Puppet on Windows is here to stay and it’s continually getting better folks.

  Read the article

• User Productivity Kit - Powerful Packages (Part 2)

  - by [email protected]

  In my first post on packages I described what a package is and how it can be used. I also started explaining some of the considerations that should be taken into account when determining how to arrange your packages. The first is when the files are interrelated and depend on one another such as an HTML file and it's graphics. A second consideration is how the files are used in your outlines. Let's say you're using a dozen Word doc files. You could place them all in a single package or put each Word doc file in a separate package but what's the right thing to do? There are several factors that will influence your decision. To understand the first, let me explain a function of UPK publishing. Take an outline in UPK that has an attachment (concept, frame link, or hyperlink) that points to a file in a package. When you publish this outline, the publishing engine will determine that there is a link to a file in the package and copy the contents of the package to the publishing destination directory. This is done to ensure that any interrelated files are kept together. For the situation where you have an HTML file with links to number of graphics files, this is a good thing. If, however, the package has a dozen unrelated Word doc files and you link to only one of them, all dozen Word documents will be copied to the publishing destination directory.  Whether or not this is a good thing is dependent on two things. First, are all of the files in the package used in the outline that you're publishing? Take an outline that includes links to all of the Word documents in that dozen document package I described earlier. For this situation, you may choose to keep all the files in a single package for convenience. A second consideration is how your organization leverages reuse in UPK. In this context, I'm referring to the link style of reuse such as when you link to the same topic from multiple UPK outlines and changes to the topic appear in both places. Take an example where you have the earlier mentioned dozen Word document package and an outline with a dozen topics in it. Each topic has an attachment pointing to one of the Word documents in the package (frame link, concept, etc.) If you're only publishing this outline, the single package probably works fine but what if you're reusing one of these topics in another outline? As I explained earlier, linking to one file in the package will result in all files in the package being copied to your published output. In this example, linking to one topic in the first outline will result in all dozen Word documents being copied to the published output. This may result in files in the output that you don't want there for business or size reasons. This is a situation in which you should consider placing each of the Word documents in it's own separate package. With each document in it's own package, that link to a single document will result in only that single package and single Word document being copied to the published output. In my last post I had described that packages are documents in the UPK library. When using the multi-user version of the UPK Developer you can leverage standard library capabilities for managing the files in these packages during the development process - capabilities such as check in / check out, history, etc. When structuring your packages take into consideration how the authors are going to be adding, modifying and deleting files from the packages. A single package is a single document in the UPK library. Like any other document in the library, a single user can check out the package and edit it at a time. If you have a large number of files in a single package and these must be modified by many users, you need to consider whether this will cause problems as multiple users compete to update the same package. If the files don't depend on each other consider placing the files in separate packages to reduce contention. I hope you've enjoyed these two posts on how you can leverage the power of packages in your content. In summary, consider the following when structuring your packages: Is the asset a single, standalone file or a set of files that depend on each other? Will all the files always be used together in a single outline or may only some of the files be needed based on how the content is reused across multiple outlines? Will multiple developers need to update the files in a single package or should you break it into multiple packages to reduce contention when checking out the document? We'd like to hear from you on how you're using packages in your content. Please add your comments below! Thank you and I hope these two posts have given you additional insights into how to use packages in your content and structure them for efficient use. John Zaums Senior Director, Product Development Oracle User Productivity Kit

  Read the article

• Is Linear Tape File System (LTFS) Best For Transportable Storage?

  - by rickramsey

  Those of us in tape storage engineering take a lot of pride in what we do, but understand that tape is the right answer to a storage problem only some of the time. And, unfortunately for a storage medium with such a long history, it has built up a few preconceived notions that are no longer valid. When I hear customers debate whether to implement tape vs. disk, one of the common strikes against tape is its perceived lack of usability. If you could go back a few generations of corporate acquisitions, you would discover that StorageTek engineers recognized this problem and started developing a solution where a tape drive could look just like a memory stick to a user. The goal was to not have to care about where files were on the cartridge, but to simply see the list of files that were on the tape, and click on them to open them up. Eventually, our friends in tape over at IBM built upon our work at StorageTek and Sun Microsystems and released the Linear Tape File System (LTFS) feature for the current LTO5 generation of tape drives as an open specification. LTFS is really a wonderful feature and we’re proud to have taken part in its beginnings and, as you’ll soon read, its future. Today we offer LTFS-Open Edition, which is free for you to use in your in Oracle Enterprise Linux 5.5 environment - not only on your LTO5 drives, but also on your Oracle StorageTek T10000C drives. You can download it free from Oracle and try it out. LTFS does exactly what its forefathers imagined. Now you can see immediately which files are on a cartridge. LTFS does this by splitting a cartridge into two partitions. The first holds all of the necessary metadata to create a directory structure for you to easily view the contents of the cartridge. The second partition holds all of the files themselves. When tape media is loaded onto a drive, a complete file system image is presented to the user. Adding files to a cartridge can be as simple as a drag-and-drop just as you do today on your laptop when transferring files from your hard drive to a thumb drive or with standard POSIX file operations. You may be thinking all of this sounds nice, but asking, “when will I actually use it?” As I mentioned at the beginning, tape is not the right solution all of the time. However, if you ever need to physically move data between locations, tape storage with LTFS should be your most cost-effective and reliable answer. I will give you a few use cases examples of when LTFS can be utilized. Media and Entertainment (M&E), Oil and Gas (O&G), and other industries have a strong need for their storage to be transportable. For example, an O&G company hunting for new oil deposits in remote locations takes very large underground seismic images which need to be shipped back to a central data center. M&E operations conduct similar activities when shooting video for productions. M&E companies also often transfers files to third-parties for editing and other activities. These companies have three highly flawed options for transporting data: electronic transfer, disk storage transport, or tape storage transport. The first option, electronic transfer, is impractical because of the expense of the bandwidth required to transfer multi-terabyte files reliably and efficiently. If there’s one place that has bandwidth, it’s your local post office so many companies revert to physically shipping storage media. Typically, M&E companies rely on transporting disk storage between sites even though it, too, is expensive. Tape storage should be the preferred format because as IDC points out, “Tape is more suitable for physical transportation of large amounts of data as it is less vulnerable to mechanical damage during transportation compared with disk" (See note 1, below). However, tape storage has not been used in the past because of the restrictions created by proprietary formats. A tape may only be readable if both the sender and receiver have the same proprietary application used to write the file. In addition, the workflows may be slowed by the need to read the entire tape cartridge during recall. LTFS solves both of these problems, clearing the way for tape to become the standard platform for transferring large files. LTFS is open and, as long as you’ve downloaded the free reader from our website or that of anyone in the LTO consortium, you can read the data. So if a movie studio ships a scene to a third-party partner to add, for example, sounds effects or a music score, it doesn’t have to care what technology the third-party has. If it’s written back to an LTFS-formatted tape cartridge, it can be read. Some tape vendors like to claim LTFS is a “standard,” but beauty is in the eye of the beholder. It’s a specification at this point, not a standard. That said, we’re already seeing application vendors create functionality to write in an LTFS format based on the specification. And it’s my belief that both customers and the tape storage industry will see the most benefit if we all follow the same path. As such, we have volunteered to lead the way in making LTFS a standard first with the Storage Network Industry Association (SNIA), and eventually through to standard bodies such as American National Standards Institute (ANSI). Expect to hear good news soon about our efforts. So, if storage transportability is one of your requirements, I recommend giving LTFS a look. It makes tape much more user-friendly and it’s free, which allows tape to maintain all of its cost advantages over disk! Note 1 - IDC Report. April, 2011. “IDC’s Archival Storage Solutions Taxonomy, 2011” - Brian Zents Website Newsletter Facebook Twitter

  Read the article

• Answers to “What source control system do you use?” (and some winners)

  - by jamiet

  About a month ago I posed a question here on my blog SQL Server devs–what source control system do you use, if any? (answer and maybe win free stuff) in which I asked SQL Server developers to answer the following questions: Are you putting your SQL Server code into a source control system? If so, what source control server software (e.g. TFS, Git, SVN, Mercurial, SourceSafe, Perforce) are you using? What source control client software are you using (e.g. TFS Team Explorer, Tortoise, Red Gate SQL Source Control, Red Gate SQL Connect, Git Bash, etc…)? Why did you make those particular software choices? Any interesting anecdotes to share in regard to your use of source control and SQL Server? I had some really great responses (I highly recommend going and reading them). I promised that the five best, most thought-provoking, responses (as determined by me) would win one of five pairs of licenses for Red Gate SQL Source Control and Red Gate SQL Connect; here are the five that I chose (note that if you responded but did not leave a means of getting in touch then you weren’t considered for one of the prizes – sorry): In general, I don't think the management overhead and licensing cost associated with TFS is worthwhile if all you're doing is using source control. To get value from TFS, at a minimum you need to be using team build, and possibly other stuff as well, such as the sharepoint integration. If that's all you need, then svn with Tortoise would be my first choice. If you want to add build automation later, you can do this with cruisecontrol (is it still called that?), JetBrains, etc. For a long time I thought that Redgate's claims about "bridging the SSMS-VS divide" were a load of hot air, since in my experience anyone who knew what they were doing was using Visual Studio, in particular SSDT and its predecessors. However, on a recent client I was putting in source control for the first time, and I discovered that the "divide" really does exist. That client has ended up using svn with Redgate SQL Source Control, with no build automation, but with scope to add it in the future. Gavin Campbell I think putting the DB under source control is a great idea.  I have issues with the earlier versions of SQL Source Control in that it provides little help in versioning the DB. I think the latest version merges SQL Compare and SQL Source Control together.  Which is how it should have been all along. Sure I have the DB scripts in SVN, but I can't automate DB builds and changes without more tools.  Frankly I'm surprised databases don't have some sort of versioning built into them. Nick Portelli Source control has been immensely useful and saved me from a lot of rework on more than one occasion.  I have learned that you have to be extremely careful checking in data.  Our system is internal only so during the system production run once a week, if there is a problem that I can fix easily(for example, a control table points to a file in the wrong environment), I'll do it directly in production so the run can continue as soon as possible since we have a specified time window.  We do full test runs to minimize this but it has come up once or twice.  We use Red-Gate source control to "push" from the test environment to the production environment.  There have been a couple of occasions where the test environment with the wrong setting was pushed back over the production environment because the change was made only in production.  Gotta keep an eye on that. Alan Dykes Goodness is it manual.  And can be extremely painful at times.  Not only are we running thin, we are constrained on the tools we can get ($$ must mean free).  Certainly no excuse, and a great opportunity to improve my skills by learning new things.  But...  Getting buy in a on a proven process or methodology is hard, takes time, and diverts us from development.  If SQL Source Control is easy to use and proven oh boy could you get some serious fans around here!  Seriously though, as the "accidental dba" of this shop any new ideas / easy to implement tools can make a world of difference in productivity and most importantly accuracy.  Manual = bad. :) John Hennesey (who left his email address) The one thing I would love to know more about is the unique challenges of working with databases as source code - you can store scripts, but are they written as deployment scripts with all the logic about how to apply them to an existing DB? Where is that baseline DB? Where's the data? How does a team share the data and the code? It's a real challenge. Merrill Aldrich Congratulations to the five of you. Red Gate will be in touch with you soon about your free licenses. Thank you to all those that responded. And again, go and check out all the responses – those above are only small proportion from what is a very interesting comment thread. @Jamiet

  Read the article

< Previous Page | 200 201 202 203 204 205 206 207 208 209 210 211  | Next Page >