Search Results

Search found 14745 results on 590 pages for 'setting'.

Page 204/590 | < Previous Page | 200 201 202 203 204 205 206 207 208 209 210 211  | Next Page >

• NetworkManager refuses to manage my WLAN interface

  - by user104167

  I'm using Ubuntu 12.10 with Gnome 3.6 on a brand-new Samsung NP900X4C. The installer detected the wireless adapter, took in the SSID and WPA passphrase, wrote these into /etc/network/interfaces and connected perfectly. Once installation was finished I wanted to switch to using NetworkManager to manage the wireless adapter, since this is much more convenient than fiddling with /etc/network/interfaces every time I find a new hotspot. Therefore I edited /etc/NetworkManager/NetworkManager.conf to set: [ifupdown] managed=true When I rebooted NetworkManager, the problems started: - The NetworkManager tray applet changed from saying device not managed to device not ready - I lost all internet connectivity as wlan0 would not associate to the Access Point - if I set managed=false in NetworkManager.conf and restarted both NetworkManager and networking services from the command-line, the Gnome desktop "semi-crashed" and lost all its Window Decorations, the panel, the launcher and basically became unusable. However if I restart the computer completely after setting managed=false, wlan0 once again works perfectly.

  Read the article

• low volume/dual boot

  - by user2367

  I have an intel Imac dual-booting Ubuntu 10.04 and OSX 10.6. Both work fine, but sound is very quiet in Linux, even though the gnome volume control panel and pulse audio volume control panels are both set to 100%. I can turn the speaker volume up and it's fine, but then when I boot back to OSX the volume makes me jump out of my skin. Is there a setting I'm missing? If I turn the gnome sound pref volume higher then 100, it tends to distort the sound. (crackling)

  Read the article

• Monitor resolution can't be saved

  - by Iztok

  Today I installed Lubuntu 13.10 on Vmware Player (inside Windows). I change the Monitor setting (resolution) from default 800x600 to 1680x1050. It works. Beside Apply, I also press Save button. "Changes are saved" appears. But - after restart, the resolution is again in 800x600. I also opened /etc/xdg/lxsession/Lubuntu/autostart and add (it was empty before) one line: @xrandr --mode 1680x1050 After restart the default resolution is back again. Any idea?

  Read the article

• Best Way to Handle Meta Information in a SQL Database

  - by danielhanly.com

  I've got a database where I want to store user information and user_meta information. The reason behind setting it up in this way was because the user_meta side may change over time and I would like to do this without disrupting the master user table. If possible, I would like some advice on how to best set up this meta data table. I can either set it as below: +----+---------+----------+--------------------+ | id | user_id | key | value | +----+---------+----------+--------------------+ | 1 | 1 | email | [email protected] | | 2 | 1 | name | user name | | 3 | 1 | address | test address | ... Or, I can set it as below: +----+---------+--------------------+--------------------+--------------+ | id | user_id | email | name | address | +----+---------+--------------------+--------------------+--------------+ | 1 | 1 | [email protected] | user name | test address | Obviously, the top verison is more flexible, but the bottom version is space saving and perhaps more efficient, returning all the data as a single record. Which is the best way to go about this? Or, am I going about this completely wrong and there's another way I've not thought of?

  Read the article

• Syanptics Touchpad Won't Re-enable

  - by user71607

  I disabled my Synaptics touchpad while a key on my keyboard and now I can't get it to work again. When I press that key again it says the touchpad turns back on but will not work at all. Rebooting doesn't help, and I tried installing touchpad-indicator but when I try to enable from there it says that it enables, but the icon remains like it's disabled. The odd thing is that it works on the lock screen so I know the drivers aren't messed up, it's just a setting. Also, the touchpad works on guest mode but still nothing on my account. I tried using gconf to set the touchpad_enable to true and it worked, it sure set it. Doesn't make a difference though, my touchpad is still useless. Terminal commands I've used: gconftool-2 --set --type boolean /desktop/gnome/peripherals/touchpad/touchpad_enabled true synclient Touchpadoff=0 modprobe psmouse

  Read the article

• Second monitor stopped working

  - by Mark D

  After setting up 11.10 today, I seem to be having problems with my dual monitor set up. It worked without issues in Mint but today after I switched to 11.10 only one monitor seems to function. This seems a little odd to me. During setup both monitors functioned without issue, although they were mirroring each other both monitors but as soon as it booted into Unity my secondary monitor stopped working. I checked under settings-display and the second monitor doesn't seem to even be detected. On the off chance it had something to do with drivers, I upgraded the proprietary drivers to the latest version with zero success. If anyone has any ideas, I'd love to hear them.

  Read the article

• fault tolerant uploading tool

  - by andersonbd1

  I'm setting up a wordpress site for a friend who has some somewhat large audio files (150M)... He's on a bad connection and I'd guess it'll take him a while to upload those files with the normal wordpress way. I'm looking for a tool that I can install on the server that allows uploads and is also fault tolerant... for example if you loses his connection, or power, or whatever it'll pick up where it left off. I realize web technologies probably don't do that, but perhaps flash or something? Any ideas?

  Read the article

• How does one get Bluetile on 12.04?

  - by JKN

  I've been working on getting bluetile working on 12.04 so I can start down the path of tiling windows managers, but I have been having limited success. I have read the (only 7!) other posts on bluetile and tried the website, but unfortunately nothing seems to address precise thoroughly enough for me to get it working. I have tried getting gnome running on my machine via apt-get and following basic instructions from there, but without success. The apt-get for bluetile also fails (on selecting the gnome-bluetile session option, unity ends up opening anyway in a buggy, unstable way). I also messed around with specifying a custom xsession for lightdm to look at and setting the window-manager to bluetile, but again without success- somehow I ended up in unity again. Apologies if this question is too vague- I am new to really using linux systems, so sometimes I don't know what to ask or look for. Thanks!

  Read the article

• JDK 7u10 Released !

  - by user9148683

  Java Development Kit 7 Update 10 (JDK 7u10) release is now live! You can download it from Java SE Downloads page. The Java™ SE Development Kit 7, Update 10 Release Notes contains information about this release. The highlights of this release include: New Certified System Configurations - Mac OS X 10.8 and Windows 8 Security Feature Enhancements: The ability to disable any Java application from running in the browser. This mode can be set in the Java Control Panel or (on Microsoft Windows platform only) using a command-line install argument. New dialogs to warn you when the JRE is insecure (either expired or below the security baseline) and needs to be updated. The documentation at Setting the Level of Security for the Java Client and Java Control Panel explains these features in detail.

  Read the article

• How to track inbound HTTP traffic using Plesk 10.4.4?

  - by hypercrypt

  I am running Plesk 10.4.4 on a Debian 6.0 server. The outbound traffic is being tracked but the inbound http traffic seems to be 0 at all times, i.e. looking at the DomainsTraffic and ClientsTraffic the http_in column is always 0. Is this a setting that I have missed? I've had a look and cannot find anything. How do I get Plesk to track the inbound HTTP traffic? I have already made sure that Home Tools & Settings Server settings had 'Include in the traffic calculation' set to 'inbound and outbound traffic', yet this does not solve the problem. Apache allows inbound traffic to be logged using %I in the log format, is there a way to get Plesk to add the %I to the log and then use that in bandwidth calculations?

  Read the article

• Private downloads [on hold]

  - by user1314836

  I am setting up a personal website and I would like to be able to share certain files with friends (e.g. photo albums or documents). Of course, each of the files should only be accessible to certain people, for example with a password or a private address. I would like to have a simple system, easy to maintain. I'm quite sure that Wordpress would let me know do something but keeping a Wordpress installation just for sharing a few files per month seems too much work. I am thinking of using the Apache capabilities for folder or file password protecting. Is this the best idea? Or would it be better just to block the directory navigation so that only people with the full path for each of the files can download them? Thanks!

  Read the article

• 12.04 precise HDMI not working on ATI Radeon

  - by sfxpt

  This is precisely a 12.04 HDMI output problem, because it works for 11.10 - everything else are the same, only the OS version is different. The symptom is that on my HDMI output TV screen, it always shows Unsupported resolution even after setting it to the resolution that works on Ubuntu 11.10 (via gnome-control-center, in which it detects my TV just fine), I still don't see any output on TV. The audio is not working either. I think it is 12.04's problem, because if I boot into Ubuntu 11.10, and everything else remain the same, HDMI output (video & audio) work just fine. 12.04 is a freshly installed, just the vanilla Ubuntu HD installation. How should I nailed down / fix the problem?

  Read the article

• How to disable the "roll up" / "shade" keyboard shortcut in Gnome 3 (after upgrading to 12.04)?

  - by torpesco

  I am using Gnome 3. After upgrading from 11.10 to 12.04, "Ctrl-Alt-S" was reclaimed for use in toggling the shaded state of a window. I have checked the following places, and I haven't been able to find any instance of a keybinding set for toggling the shaded state. System Settings / Hardware / Keyboard / Shortcuts (as per How do I disable Ctrl+Alt+s to minimize a window?) I even tried setting a different shortcut. Made no difference. dconf-editor (now deprecated, from what I've found) gconf-editor/gsettings What am I missing?

  Read the article

• Internet connectivity issues

  - by Fishies

  I'm on 12.04, I upgraded a month ago from Windows 7 on my Sony VAIO. Everything is great except after the upgrade, I encountered Internet connectivity issues. When browsing the web or loading videos, my Internet will stop working in the middle and come back after a period of 30 seconds to 2 minutes or sometimes it just won't and I'll have to disconnect and re-connect to the network. I've noticed the issue when sending e-mails as well, they just won't send at all. It says sending request and the circle keeps spinning slowly until I get to a page where it says the page wouldn't load and gives me the reason DNS error. I tried setting OpenDNS as my DNS provider but that didn't help.

  Read the article

• 3 Steps to Establishing an Internet Presence

  In today's World Wide Web, establishing an Internet presence could mean a number of things. From, starting a simple personal website, to setting up a profile on a social networking site, to starting a blog using any of the several hosted blog platform solutions. But if you're starting a home business - on or offline, establishing an Internet presence begins with creating a website for your business, where the introductions between potential customers and the products and/or services you offer take place. In many cases, this involves obtaining a domain name, getting reliable web hosting, and building your website.

  Read the article

• A Safe Way to Allow Upload of All File Types?

  - by user34682

  By default WordPress restricts the file types that can be uploaded to /uploads using the default Media Manager. I know it is possible to manually extend the allowed file types. I also know it is possible to change functions.php to allow ALL file types to be uploaded. This restriction obviously exists for security concerns - e.g. someone could upload a harmful .exe Would it not be possible to allow secure upload of all filetypes by setting the permissions of the /uploads directory to prevent execution of any of its contents? Thus it wouldn't matter if someone uploaded a harmful file because it would not be executable on the server...

  Read the article

• Putting the Con (COM1, LPT1, NUL, etc.) Back in your URLs

  One annoyance that some developers have run into with ASP.NET MVC is that certain reserved filenames are not allowed in URLs. The specifics of this restriction are accounted for in an interesting blog post entitled Zombie Operating Systems and ASP.NET MVC. This actually wasnt a restriction on ASP.NET MVC but was built into the core of ASP.NET itself. Fortunately, ASP.NET 4 fixes this issue with a new setting. In web.config, simply add <httpRuntime relaxedUrlToFileSystemMapping="true"/> to...Did you know that DotNetSlackers also publishes .net articles written by top known .net Authors? We already have over 80 articles in several categories including Silverlight. Take a look: here.

  Read the article

• How to setup Cocos2D-X (Android) under Mac OS X?

  - by Beast

  Hi I've made a small game for iPhone that I also want to run on Android but I'm having problems setting up Cocos2D-X for Android. I've downloaded and installed Android SDK and NDK (under my "/Users/username/Android"). Installed all necessary packages under SDK and created an Emulator. Copied Cocos2D-x under "/Users/username/cocos2dx". Installed Eclipse IDE with ADT Plugin. Opened "Users/username/cocos2dx/tests/build_native.sh" and changed "NDK_ROOT_LOCAL=/Users/username/Android/android-ndk", "COCOS2DX_ROOT_LOCAL=/Users/username/cocos2dx" to the values shown. On running the script using Terminal it compiles test project. What's next?

  Read the article

• 3 Steps to Establishing an Internet Presence

  In today's World Wide Web, establishing an Internet presence could mean a number of things. From, starting a simple personal website, to setting up a profile on a social networking site, to starting a blog using any of the several hosted blog platform solutions. But if you're starting a home business - on or offline, establishing an Internet presence begins with creating a website for your business, where the introductions between potential customers and the products and/or services you offer take place. In many cases, this involves obtaining a domain name, getting reliable web hosting, and building your website.

  Read the article

• echo difference between ubuntu and RedHat

  - by arcomber

  I have mostly been experimenting with ubuntu but recently was using a Red Hat Enterprise system and was surprised at a difference I found setting and displaying env variables. In ubuntu I might have an interaction like this: acomber@mail:~$ export MY_VAR=i686-linux acomber@mail:~$ echo $MY_VAR i686-linux acomber@mail:~$ echo "$MY_VAR" i686-linux But on RHEL: acomber@mail:~$ export MY_VAR=i686-linux acomber@mail:~$ echo $MY_VAR acomber@mail:~$ echo "$MY_VAR" i686-linux I know this is a ubuntu forum but why the difference? Why do I need to enclose in quotes on RH? There are no spaces in the variable name?

  Read the article

• Linux e1000e (Intel networking driver) problems galore, where do I start?

  - by Evan Carroll

  I'm currently having a major problem with e1000e (not working at all) in Ubuntu Maverick (1.0.2-k4), after resume I'm getting a lot of stuff in dmesg: [ 9085.820197] e1000e 0000:02:00.0: PCI INT A disabled [ 9089.907756] e1000e: Intel(R) PRO/1000 Network Driver - 1.0.2-k4 [ 9089.907762] e1000e: Copyright (c) 1999 - 2009 Intel Corporation. [ 9089.907797] e1000e 0000:02:00.0: Disabling ASPM L1 [ 9089.907827] e1000e 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 9089.907857] e1000e 0000:02:00.0: setting latency timer to 64 [ 9089.908529] e1000e 0000:02:00.0: irq 44 for MSI/MSI-X [ 9089.908922] e1000e 0000:02:00.0: Disabling ASPM L0s [ 9089.908954] e1000e 0000:02:00.0: (unregistered net_device): PHY reset is blocked due to SOL/IDER session. [ 9090.024625] e1000e 0000:02:00.0: eth0: (PCI Express:2.5GB/s:Width x1) 00:0a:e4:3e:ce:74 [ 9090.024630] e1000e 0000:02:00.0: eth0: Intel(R) PRO/1000 Network Connection [ 9090.024712] e1000e 0000:02:00.0: eth0: MAC: 2, PHY: 2, PBA No: 005302-003 [ 9090.109492] e1000e 0000:02:00.0: irq 44 for MSI/MSI-X [ 9090.164219] e1000e 0000:02:00.0: irq 44 for MSI/MSI-X and, a bunch of [ 2128.005447] e1000e 0000:02:00.0: eth0: Detected Hardware Unit Hang: [ 2128.005452] TDH <89> [ 2128.005454] TDT <27> [ 2128.005456] next_to_use <27> [ 2128.005458] next_to_clean <88> [ 2128.005460] buffer_info[next_to_clean]: [ 2128.005463] time_stamp <6e608> [ 2128.005465] next_to_watch <8a> [ 2128.005467] jiffies <6f929> [ 2128.005469] next_to_watch.status <0> [ 2128.005471] MAC Status <80080703> [ 2128.005473] PHY Status <796d> [ 2128.005475] PHY 1000BASE-T Status <4000> [ 2128.005477] PHY Extended Status <3000> [ 2128.005480] PCI Status <10> I decided to compile the latest stable e1000e to 1.2.17, now I'm getting: [ 9895.678050] e1000e: Intel(R) PRO/1000 Network Driver - 1.2.17-NAPI [ 9895.678055] e1000e: Copyright(c) 1999 - 2010 Intel Corporation. [ 9895.678098] e1000e 0000:02:00.0: Disabling ASPM L1 [ 9895.678129] e1000e 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 9895.678162] e1000e 0000:02:00.0: setting latency timer to 64 [ 9895.679136] e1000e 0000:02:00.0: irq 44 for MSI/MSI-X [ 9895.679160] e1000e 0000:02:00.0: Disabling ASPM L0s [ 9895.679192] e1000e 0000:02:00.0: (unregistered net_device): PHY reset is blocked due to SOL/IDER session. [ 9895.791758] e1000e 0000:02:00.0: eth0: (PCI Express:2.5GB/s:Width x1) 00:0a:e4:3e:ce:74 [ 9895.791766] e1000e 0000:02:00.0: eth0: Intel(R) PRO/1000 Network Connection [ 9895.791850] e1000e 0000:02:00.0: eth0: MAC: 3, PHY: 2, PBA No: 005302-003 [ 9895.892464] e1000e 0000:02:00.0: irq 44 for MSI/MSI-X [ 9895.948175] e1000e 0000:02:00.0: irq 44 for MSI/MSI-X [ 9895.949111] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 9895.954694] e1000e: eth0 NIC Link is Up 10 Mbps Full Duplex, Flow Control: RX/TX [ 9895.954703] e1000e 0000:02:00.0: eth0: 10/100 speed: disabling TSO [ 9895.955157] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 9906.832056] eth0: no IPv6 routers present With 1.2.20 I get: [ 9711.525465] e1000e: Intel(R) PRO/1000 Network Driver - 1.2.20-NAPI [ 9711.525472] e1000e: Copyright(c) 1999 - 2010 Intel Corporation. [ 9711.525521] e1000e 0000:02:00.0: Disabling ASPM L1 [ 9711.525554] e1000e 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 9711.525586] e1000e 0000:02:00.0: setting latency timer to 64 [ 9711.526460] e1000e 0000:02:00.0: irq 45 for MSI/MSI-X [ 9711.526487] e1000e 0000:02:00.0: Disabling ASPM L0s [ 9711.526523] e1000e 0000:02:00.0: (unregistered net_device): PHY reset is blocked due to SOL/IDER session. [ 9711.639763] e1000e 0000:02:00.0: eth0: (PCI Express:2.5GB/s:Width x1) 00:0a:e4:3e:ce:74 [ 9711.639771] e1000e 0000:02:00.0: eth0: Intel(R) PRO/1000 Network Connection [ 9711.639854] e1000e 0000:02:00.0: eth0: MAC: 3, PHY: 2, PBA No: 005302-003 [ 9712.060770] e1000e 0000:02:00.0: irq 45 for MSI/MSI-X [ 9712.116195] e1000e 0000:02:00.0: irq 45 for MSI/MSI-X [ 9712.117098] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 9712.122684] e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX [ 9712.122693] e1000e 0000:02:00.0: eth0: 10/100 speed: disabling TSO [ 9712.123142] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 9722.920014] eth0: no IPv6 routers present But, I'm still getting these [ 9982.992851] PCI Status <10> [ 9984.993602] e1000e 0000:02:00.0: eth0: Detected Hardware Unit Hang: [ 9984.993606] TDH <5d> [ 9984.993608] TDT <6b> [ 9984.993611] next_to_use <6b> [ 9984.993613] next_to_clean <5b> [ 9984.993615] buffer_info[next_to_clean]: [ 9984.993617] time_stamp <24da80> [ 9984.993619] next_to_watch <5d> [ 9984.993621] jiffies <24f200> [ 9984.993624] next_to_watch.status <0> [ 9984.993626] MAC Status <80080703> [ 9984.993628] PHY Status <796d> [ 9984.993630] PHY 1000BASE-T Status <4000> [ 9984.993632] PHY Extended Status <3000> [ 9984.993635] PCI Status <10> [ 9986.001047] e1000e 0000:02:00.0: eth0: Reset adapter [ 9986.176202] e1000e: eth0 NIC Link is Up 10 Mbps Full Duplex, Flow Control: RX/TX [ 9986.176211] e1000e 0000:02:00.0: eth0: 10/100 speed: disabling TSO I'm not sure where to start troubleshooting this. Any ideas? Here is the result of ethtool -d eth0 MAC Registers ------------- 0x00000: CTRL (Device control register) 0x18100248 Endian mode (buffers): little Link reset: reset Set link up: 1 Invert Loss-Of-Signal: no Receive flow control: enabled Transmit flow control: enabled VLAN mode: disabled Auto speed detect: disabled Speed select: 1000Mb/s Force speed: no Force duplex: no 0x00008: STATUS (Device status register) 0x80080703 Duplex: full Link up: link config TBI mode: disabled Link speed: 10Mb/s Bus type: PCI Express Port number: 0 0x00100: RCTL (Receive control register) 0x04048002 Receiver: enabled Store bad packets: disabled Unicast promiscuous: disabled Multicast promiscuous: disabled Long packet: disabled Descriptor minimum threshold size: 1/2 Broadcast accept mode: accept VLAN filter: enabled Canonical form indicator: disabled Discard pause frames: filtered Pass MAC control frames: don't pass Receive buffer size: 2048 0x02808: RDLEN (Receive desc length) 0x00001000 0x02810: RDH (Receive desc head) 0x00000001 0x02818: RDT (Receive desc tail) 0x000000F0 0x02820: RDTR (Receive delay timer) 0x00000000 0x00400: TCTL (Transmit ctrl register) 0x3103F0FA Transmitter: enabled Pad short packets: enabled Software XOFF Transmission: disabled Re-transmit on late collision: enabled 0x03808: TDLEN (Transmit desc length) 0x00001000 0x03810: TDH (Transmit desc head) 0x00000000 0x03818: TDT (Transmit desc tail) 0x00000000 0x03820: TIDV (Transmit delay timer) 0x00000008 PHY type: IGP2 and ethtool -c eth0 Coalesce parameters for eth0: Adaptive RX: off TX: off stats-block-usecs: 0 sample-interval: 0 pkt-rate-low: 0 pkt-rate-high: 0 rx-usecs: 3 rx-frames: 0 rx-usecs-irq: 0 rx-frames-irq: 0 tx-usecs: 0 tx-frames: 0 tx-usecs-irq: 0 tx-frames-irq: 0 rx-usecs-low: 0 rx-frame-low: 0 tx-usecs-low: 0 tx-frame-low: 0 rx-usecs-high: 0 rx-frame-high: 0 tx-usecs-high: 0 tx-frame-high: 0 Here is also the lspci -vvv for this controller 02:00.0 Ethernet controller: Intel Corporation 82573L Gigabit Ethernet Controller Subsystem: Lenovo ThinkPad X60s Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 45 Region 0: Memory at ee000000 (32-bit, non-prefetchable) [size=128K] Region 2: I/O ports at 2000 [size=32] Capabilities: [c8] Power Management version 2 Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=1 PME- Capabilities: [d0] MSI: Enable+ Count=1/1 Maskable- 64bit+ Address: 00000000fee0300c Data: 415a Capabilities: [e0] Express (v1) Endpoint, MSI 00 DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <512ns, L1 <64us ExtTag- AttnBtn- AttnInd- PwrInd- RBE- FLReset- DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+ RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+ MaxPayload 128 bytes, MaxReadReq 512 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend- LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <128ns, L1 <64us ClockPM+ Surprise- LLActRep- BwNot- LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+ ExtSynch- ClockPM+ AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- Capabilities: [100 v1] Advanced Error Reporting UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq+ ACSViol- UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- UESvrt: DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol- CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr- CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr- AERCap: First Error Pointer: 14, GenCap- CGenEn- ChkCap- ChkEn- Capabilities: [140 v1] Device Serial Number 00-0a-e4-ff-ff-3e-ce-74 Kernel driver in use: e1000e Kernel modules: e1000e I filed a bug on this upstream, still no idea how to get more useful information. Here is a the result of the running that script EEPROM FIX UPDATE $ sudo bash fixeep-82573-dspd.sh eth0 eth0: is a "82573L Gigabit Ethernet Controller" This fixup is applicable to your hardware Your eeprom is up to date, no changes were made Do I still need to do anything? Also here is my EEPROM dump $ sudo ethtool -e eth0 Offset Values ------ ------ 0x0000 00 0a e4 3e ce 74 30 0b b2 ff 51 00 ff ff ff ff 0x0010 53 00 03 02 6b 02 7e 20 aa 17 9a 10 86 80 df 80 0x0020 00 00 00 20 54 7e 00 00 14 00 da 00 04 00 00 27 0x0030 c9 6c 50 31 3e 07 0b 04 8b 29 00 00 00 f0 02 0f 0x0040 08 10 00 00 04 0f ff 7f 01 4d ff ff ff ff ff ff 0x0050 14 00 1d 00 14 00 1d 00 af aa 1e 00 00 00 1d 00 0x0060 00 01 00 40 1f 12 07 40 ff ff ff ff ff ff ff ff 0x0070 ff ff ff ff ff ff ff ff ff ff ff ff ff ff 4a e0 I'd also like to note that I used eth0 every day for years and until recently never had an issue.

  Read the article

• How to tune down the Hyperic built-in postgresql database for a small setup

  - by Svish

  We are testing out Hyperic 4.5.1 in a quite small environment for now. Currently there are just 1-5 agents and there probably won't be any more than 10-15. When I run ps ax there are 20(!) postgres processes running. For a small setup like this, that can't be necessary, can it? I'm a software developer and don't have much experience with setting up servers and such though, so don't really know. Either way, what settings are appropriate for a small Hyperic setup like this? Current, default and untouched configuration file, hqdb/data/postgresql.conf: # ----------------------------- # PostgreSQL configuration file # ----------------------------- # # This file consists of lines of the form: # # name = value # # (The '=' is optional.) White space may be used. Comments are introduced # with '#' anywhere on a line. The complete list of option names and # allowed values can be found in the PostgreSQL documentation. The # commented-out settings shown in this file represent the default values. # # Please note that re-commenting a setting is NOT sufficient to revert it # to the default value, unless you restart the server. # # Any option can also be given as a command line switch to the server, # e.g., 'postgres -c log_connections=on'. Some options can be changed at # run-time with the 'SET' SQL command. # # This file is read on server startup and when the server receives a # SIGHUP. If you edit the file on a running system, you have to SIGHUP the # server for the changes to take effect, or use "pg_ctl reload". Some # settings, which are marked below, require a server shutdown and restart # to take effect. # # Memory units: kB = kilobytes MB = megabytes GB = gigabytes # Time units: ms = milliseconds s = seconds min = minutes h = hours d = days #--------------------------------------------------------------------------- # FILE LOCATIONS #--------------------------------------------------------------------------- # The default values of these variables are driven from the -D command line # switch or PGDATA environment variable, represented here as ConfigDir. #data_directory = 'ConfigDir' # use data in another directory # (change requires restart) #hba_file = 'ConfigDir/pg_hba.conf' # host-based authentication file # (change requires restart) #ident_file = 'ConfigDir/pg_ident.conf' # ident configuration file # (change requires restart) # If external_pid_file is not explicitly set, no extra PID file is written. #external_pid_file = '(none)' # write an extra PID file # (change requires restart) #--------------------------------------------------------------------------- # CONNECTIONS AND AUTHENTICATION #--------------------------------------------------------------------------- # - Connection Settings - #listen_addresses = 'localhost' # what IP address(es) to listen on; # comma-separated list of addresses; # defaults to 'localhost', '*' = all # (change requires restart) port = 9432 # (change requires restart) max_connections = 100 # (change requires restart) # Note: increasing max_connections costs ~400 bytes of shared memory per # connection slot, plus lock space (see max_locks_per_transaction). You # might also need to raise shared_buffers to support more connections. #superuser_reserved_connections = 3 # (change requires restart) #unix_socket_directory = '' # (change requires restart) #unix_socket_group = '' # (change requires restart) #unix_socket_permissions = 0777 # octal # (change requires restart) #bonjour_name = '' # defaults to the computer name # (change requires restart) # - Security & Authentication - #authentication_timeout = 1min # 1s-600s #ssl = off # (change requires restart) #password_encryption = on #db_user_namespace = off # Kerberos #krb_server_keyfile = '' # (change requires restart) #krb_srvname = 'postgres' # (change requires restart) #krb_server_hostname = '' # empty string matches any keytab entry # (change requires restart) #krb_caseins_users = off # (change requires restart) # - TCP Keepalives - # see 'man 7 tcp' for details #tcp_keepalives_idle = 0 # TCP_KEEPIDLE, in seconds; # 0 selects the system default #tcp_keepalives_interval = 0 # TCP_KEEPINTVL, in seconds; # 0 selects the system default #tcp_keepalives_count = 0 # TCP_KEEPCNT; # 0 selects the system default #--------------------------------------------------------------------------- # RESOURCE USAGE (except WAL) #--------------------------------------------------------------------------- # - Memory - shared_buffers = 64MB # min 128kB or max_connections*16kB # (change requires restart) #temp_buffers = 8MB # min 800kB #max_prepared_transactions = 5 # can be 0 or more # (change requires restart) # Note: increasing max_prepared_transactions costs ~600 bytes of shared memory # per transaction slot, plus lock space (see max_locks_per_transaction). work_mem = 2MB # min 64kB maintenance_work_mem = 32MB # min 1MB #max_stack_depth = 2MB # min 100kB # - Free Space Map - max_fsm_pages = 204800 # min max_fsm_relations*16, 6 bytes each # (change requires restart) #max_fsm_relations = 1000 # min 100, ~70 bytes each # (change requires restart) # - Kernel Resource Usage - #max_files_per_process = 1000 # min 25 # (change requires restart) #shared_preload_libraries = '' # (change requires restart) # - Cost-Based Vacuum Delay - #vacuum_cost_delay = 0 # 0-1000 milliseconds #vacuum_cost_page_hit = 1 # 0-10000 credits #vacuum_cost_page_miss = 10 # 0-10000 credits #vacuum_cost_page_dirty = 20 # 0-10000 credits #vacuum_cost_limit = 200 # 0-10000 credits # - Background writer - #bgwriter_delay = 200ms # 10-10000ms between rounds #bgwriter_lru_percent = 1.0 # 0-100% of LRU buffers scanned/round #bgwriter_lru_maxpages = 5 # 0-1000 buffers max written/round #bgwriter_all_percent = 0.333 # 0-100% of all buffers scanned/round #bgwriter_all_maxpages = 5 # 0-1000 buffers max written/round #--------------------------------------------------------------------------- # WRITE AHEAD LOG #--------------------------------------------------------------------------- # - Settings - fsync = on # turns forced synchronization on or off #wal_sync_method = fsync # the default is the first option # supported by the operating system: # open_datasync # fdatasync # fsync # fsync_writethrough # open_sync #full_page_writes = on # recover from partial page writes #wal_buffers = 64kB # min 32kB # (change requires restart) commit_delay = 100000 # range 0-100000, in microseconds #commit_siblings = 5 # range 1-1000 # - Checkpoints - checkpoint_segments = 10 # in logfile segments, min 1, 16MB each #checkpoint_timeout = 5min # range 30s-1h #checkpoint_warning = 30s # 0 is off # - Archiving - #archive_command = '' # command to use to archive a logfile segment #archive_timeout = 0 # force a logfile segment switch after this # many seconds; 0 is off #--------------------------------------------------------------------------- # QUERY TUNING #--------------------------------------------------------------------------- # - Planner Method Configuration - #enable_bitmapscan = on #enable_hashagg = on #enable_hashjoin = on #enable_indexscan = on #enable_mergejoin = on #enable_nestloop = on #enable_seqscan = on #enable_sort = on #enable_tidscan = on # - Planner Cost Constants - #seq_page_cost = 1.0 # measured on an arbitrary scale #random_page_cost = 4.0 # same scale as above #cpu_tuple_cost = 0.01 # same scale as above #cpu_index_tuple_cost = 0.005 # same scale as above #cpu_operator_cost = 0.0025 # same scale as above #effective_cache_size = 128MB # - Genetic Query Optimizer - #geqo = on #geqo_threshold = 12 #geqo_effort = 5 # range 1-10 #geqo_pool_size = 0 # selects default based on effort #geqo_generations = 0 # selects default based on effort #geqo_selection_bias = 2.0 # range 1.5-2.0 # - Other Planner Options - #default_statistics_target = 10 # range 1-1000 #constraint_exclusion = off #from_collapse_limit = 8 #join_collapse_limit = 8 # 1 disables collapsing of explicit # JOINs #--------------------------------------------------------------------------- # ERROR REPORTING AND LOGGING #--------------------------------------------------------------------------- # - Where to Log - log_destination = 'stderr' # Valid values are combinations of # stderr, syslog and eventlog, # depending on platform. # This is used when logging to stderr: redirect_stderr = on # Enable capturing of stderr into log # files # (change requires restart) # These are only used if redirect_stderr is on: log_directory = '../../logs' # Directory where log files are written # Can be absolute or relative to PGDATA log_filename = 'hqdb-%Y-%m-%d.log' # Log file name pattern. # Can include strftime() escapes #log_truncate_on_rotation = off # If on, any existing log file of the same # name as the new log file will be # truncated rather than appended to. But # such truncation only occurs on # time-driven rotation, not on restarts # or size-driven rotation. Default is # off, meaning append to existing files # in all cases. log_rotation_age = 1d # Automatic rotation of logfiles will # happen after that time. 0 to # disable. #log_rotation_size = 10MB # Automatic rotation of logfiles will # happen after that much log # output. 0 to disable. # These are relevant when logging to syslog: #syslog_facility = 'LOCAL0' #syslog_ident = 'postgres' # - When to Log - #client_min_messages = notice # Values, in order of decreasing detail: # debug5 # debug4 # debug3 # debug2 # debug1 # log # notice # warning # error #log_min_messages = notice # Values, in order of decreasing detail: # debug5 # debug4 # debug3 # debug2 # debug1 # info # notice # warning # error # log # fatal # panic #log_error_verbosity = default # terse, default, or verbose messages #log_min_error_statement = error # Values in order of increasing severity: # debug5 # debug4 # debug3 # debug2 # debug1 # info # notice # warning # error # fatal # panic (effectively off) log_min_duration_statement = 10000 # -1 is disabled, 0 logs all statements # and their durations. #silent_mode = off # DO NOT USE without syslog or # redirect_stderr # (change requires restart) # - What to Log - #debug_print_parse = off #debug_print_rewritten = off #debug_print_plan = off #debug_pretty_print = off #log_connections = off #log_disconnections = off #log_duration = off #log_line_prefix = '' # Special values: # %u = user name # %d = database name # %r = remote host and port # %h = remote host # %p = PID # %t = timestamp (no milliseconds) # %m = timestamp with milliseconds # %i = command tag # %c = session id # %l = session line number # %s = session start timestamp # %x = transaction id # %q = stop here in non-session # processes # %% = '%' # e.g. '<%u%%%d> ' #log_statement = 'none' # none, ddl, mod, all #log_hostname = off #--------------------------------------------------------------------------- # RUNTIME STATISTICS #--------------------------------------------------------------------------- # - Query/Index Statistics Collector - #stats_command_string = on #update_process_title = on stats_start_collector = on # needed for block or row stats # (change requires restart) stats_block_level = on stats_row_level = on stats_reset_on_server_start = off # (change requires restart) # - Statistics Monitoring - #log_parser_stats = off #log_planner_stats = off #log_executor_stats = off #log_statement_stats = off #--------------------------------------------------------------------------- # AUTOVACUUM PARAMETERS #--------------------------------------------------------------------------- #autovacuum = off # enable autovacuum subprocess? # 'on' requires stats_start_collector # and stats_row_level to also be on #autovacuum_naptime = 1min # time between autovacuum runs #autovacuum_vacuum_threshold = 500 # min # of tuple updates before # vacuum #autovacuum_analyze_threshold = 250 # min # of tuple updates before # analyze #autovacuum_vacuum_scale_factor = 0.2 # fraction of rel size before # vacuum #autovacuum_analyze_scale_factor = 0.1 # fraction of rel size before # analyze #autovacuum_freeze_max_age = 200000000 # maximum XID age before forced vacuum # (change requires restart) #autovacuum_vacuum_cost_delay = -1 # default vacuum cost delay for # autovacuum, -1 means use # vacuum_cost_delay #autovacuum_vacuum_cost_limit = -1 # default vacuum cost limit for # autovacuum, -1 means use # vacuum_cost_limit #--------------------------------------------------------------------------- # CLIENT CONNECTION DEFAULTS #--------------------------------------------------------------------------- # - Statement Behavior - #search_path = '"$user",public' # schema names #default_tablespace = '' # a tablespace name, '' uses # the default #check_function_bodies = on #default_transaction_isolation = 'read committed' #default_transaction_read_only = off #statement_timeout = 0 # 0 is disabled #vacuum_freeze_min_age = 100000000 # - Locale and Formatting - datestyle = 'iso, mdy' #timezone = unknown # actually, defaults to TZ # environment setting #timezone_abbreviations = 'Default' # select the set of available timezone # abbreviations. Currently, there are # Default # Australia # India # However you can also create your own # file in share/timezonesets/. #extra_float_digits = 0 # min -15, max 2 #client_encoding = sql_ascii # actually, defaults to database # encoding # These settings are initialized by initdb -- they might be changed lc_messages = 'C' # locale for system error message # strings lc_monetary = 'C' # locale for monetary formatting lc_numeric = 'C' # locale for number formatting lc_time = 'C' # locale for time formatting # - Other Defaults - #explain_pretty_print = on #dynamic_library_path = '$libdir' #local_preload_libraries = '' #--------------------------------------------------------------------------- # LOCK MANAGEMENT #--------------------------------------------------------------------------- #deadlock_timeout = 1s #max_locks_per_transaction = 64 # min 10 # (change requires restart) # Note: each lock table slot uses ~270 bytes of shared memory, and there are # max_locks_per_transaction * (max_connections + max_prepared_transactions) # lock table slots. #--------------------------------------------------------------------------- # VERSION/PLATFORM COMPATIBILITY #--------------------------------------------------------------------------- # - Previous Postgres Versions - #add_missing_from = off #array_nulls = on #backslash_quote = safe_encoding # on, off, or safe_encoding #default_with_oids = off #escape_string_warning = on #standard_conforming_strings = off #regex_flavor = advanced # advanced, extended, or basic #sql_inheritance = on # - Other Platforms & Clients - #transform_null_equals = off #--------------------------------------------------------------------------- # CUSTOMIZED OPTIONS #--------------------------------------------------------------------------- #custom_variable_classes = '' # list of custom variable class names SELECT * FROM pg_stat_activity; datid | datname | procpid | usesysid | usename | current_query | waiting | query_start | backend_start | client_addr | client_port -------+---------+---------+----------+---------+---------------------------------+---------+-------------------------------+-------------------------------+-------------+------------- 16384 | hqdb | 3267 | 10 | hqadmin | <IDLE> | f | 2011-02-08 15:51:20.036781+01 | 2011-02-08 15:51:20.02413+01 | 127.0.0.1 | 47892 16384 | hqdb | 3268 | 10 | hqadmin | <IDLE> | f | 2011-02-08 15:51:20.050994+01 | 2011-02-08 15:51:20.047393+01 | 127.0.0.1 | 47893 16384 | hqdb | 3269 | 10 | hqadmin | <IDLE> | f | 2011-02-08 15:51:20.056661+01 | 2011-02-08 15:51:20.053201+01 | 127.0.0.1 | 47894 16384 | hqdb | 3271 | 10 | hqadmin | <IDLE> | f | 2011-02-08 15:51:20.062351+01 | 2011-02-08 15:51:20.058822+01 | 127.0.0.1 | 47895 16384 | hqdb | 3272 | 10 | hqadmin | <IDLE> | f | 2011-02-08 15:51:20.068328+01 | 2011-02-08 15:51:20.064517+01 | 127.0.0.1 | 47896 16384 | hqdb | 3273 | 10 | hqadmin | <IDLE> | f | 2011-02-08 15:51:20.07444+01 | 2011-02-08 15:51:20.070755+01 | 127.0.0.1 | 47897 16384 | hqdb | 3274 | 10 | hqadmin | <IDLE> | f | 2011-02-08 15:51:20.080941+01 | 2011-02-08 15:51:20.076983+01 | 127.0.0.1 | 47898 16384 | hqdb | 3275 | 10 | hqadmin | <IDLE> | f | 2011-02-08 15:51:20.08741+01 | 2011-02-08 15:51:20.083697+01 | 127.0.0.1 | 47899 16384 | hqdb | 3276 | 10 | hqadmin | <IDLE> | f | 2011-02-08 15:51:20.093597+01 | 2011-02-08 15:51:20.089977+01 | 127.0.0.1 | 47900 16384 | hqdb | 3277 | 10 | hqadmin | <IDLE> in transaction | f | 2011-02-08 15:51:20.133974+01 | 2011-02-08 15:51:20.096149+01 | 127.0.0.1 | 47901 16384 | hqdb | 3308 | 10 | hqadmin | <IDLE> | f | 2011-02-09 10:49:27.402197+01 | 2011-02-08 15:51:29.826321+01 | 127.0.0.1 | 47902 16384 | hqdb | 3309 | 10 | hqadmin | <IDLE> | f | 2011-02-08 15:51:55.572395+01 | 2011-02-08 15:51:29.865243+01 | 127.0.0.1 | 47903 16384 | hqdb | 3310 | 10 | hqadmin | <IDLE> | f | 2011-02-08 15:51:55.586273+01 | 2011-02-08 15:51:29.874346+01 | 127.0.0.1 | 47904 16384 | hqdb | 3311 | 10 | hqadmin | <IDLE> | f | 2011-02-09 10:10:03.024088+01 | 2011-02-08 15:51:29.883598+01 | 127.0.0.1 | 47905 16384 | hqdb | 3312 | 10 | hqadmin | <IDLE> in transaction | f | 2011-02-08 15:51:35.804457+01 | 2011-02-08 15:51:29.892925+01 | 127.0.0.1 | 47906 16384 | hqdb | 3418 | 10 | hqadmin | <IDLE> | f | 2011-02-08 15:51:55.580207+01 | 2011-02-08 15:51:55.56911+01 | 127.0.0.1 | 47910 16384 | hqdb | 3419 | 10 | hqadmin | <IDLE> | f | 2011-02-08 15:51:55.59781+01 | 2011-02-08 15:51:55.588609+01 | 127.0.0.1 | 47911 16384 | hqdb | 3422 | 10 | hqadmin | <IDLE> | f | 2011-02-09 10:10:02.668836+01 | 2011-02-08 15:51:55.603076+01 | 127.0.0.1 | 47914 16384 | hqdb | 3421 | 10 | hqadmin | <IDLE> | f | 2011-02-08 15:51:55.770427+01 | 2011-02-08 15:51:55.603086+01 | 127.0.0.1 | 47913 16384 | hqdb | 3420 | 10 | hqadmin | <IDLE> | f | 2011-02-08 15:51:55.680785+01 | 2011-02-08 15:51:55.637058+01 | 127.0.0.1 | 47912 16384 | hqdb | 18233 | 10 | hqadmin | SELECT * FROM pg_stat_activity; | f | 2011-02-09 10:49:29.688949+01 | 2011-02-09 10:48:13.031475+01 | | -1 (21 rows)

  Read the article

• Wireless access point -> Powerline -> Router -> Internet, should this work?

  - by Anthony

  My network at home used to be a laptop and desktop connected wirelessly to a single Wireless ADSL router, a Cisco 877W. Wireless reception around the house with this setup was quite unreliable, so I've gone about looking to improve it. I purchased some Belkin Gigabit powerline adapters and I've got these working fine. I can hook a computer up to one of the powerline adapters, and with the other one plugged into the ADSL router the computer has internet access. Additionally I can hook a Netgear DG834G Wireless ADSL router into it with the adsl not plugged in, and after turning off DHCP can RJ45 a computer up to the network. Everything works fine. However, if I setup a wireless network on the Netgear then any computer that connects wirelessly to it cannot access the internet. It gets an IP address very slowly via DHCP which is a good one, but it cannot access the internet. It can however communicate with the RJ45'd computer also connected to the Netgear. I wondered whether this could be a problem with the Netgear so I've borrowed a Cisco Aironet 1200 and got this working fine when it's attached directly to the primary ADSL router. I can connect to it wireless and get onto the internet. However, if I then plug it into the Netgear I can communicate with other devices attached to the Netgear, but can't get any further than the Netgear. All the while though the other devices RJ45'd to the Netgear are communicating with the internet just fine. I'm starting to suspect it's one of two things causing the problem: 1) For some reason the belkin powerline adapters don't like carrying wireless-originating signals. Could this be possible? 2) The primary Cisco ADSL router doesn't want to communicate with other devices on my network more than one hop away from it. I'm making an assumption here that within the Netgear box the wireless and wired sides are handled differently. Could this be true? Has anyone successfully setup something similar to what I'm trying, with a wireless device on the otherside of a pair of powerline connectors? Update 06/07/2010 - Response to irrational John 28 June Thanks for the answer John - and for clearing up some of my questions. The model number of the belkin powerline adapters are F5D4076. Security was apparently enabled by default on them, and I didn't change them from their default setting. The network diagram in your answer shows exactly what I'm trying to setup: I've followed that guide and I'm still not able to get things working properly. The thing that perplexes me is that wired network traffic works just fine - it's only the wireless traffic that doesn't. This is with the same laptop, and the same DHCP or static IPs. "1. What IP addresses did you assign to each router? What subnet masks are you using?" - subnet is 255.255.255.0, the router connected to the adsl is 192.168.153.1 and that has the DHCP server. The access point on the other side of the powerline adapters I've tried both a static IP of 192.168.153.110, same subnet, and a DHCP-assigned IP. The other devices are DHCP, although I also tried manually entering IP settings. "2. Have you correctly enabled DHCP on only one of the routers and disabled it on all the others?" Yes I have - only the internet-connected router has DHCP enabled. The IP range for the DHCP is from 192.168.153.11 - 192.168.153.200. The strange thing is that wired connections work fine on the LAN, plugged into any router, work fine - it's only the wireless connections that aren't working when they're plugged into the non-primary AP. "Since the routers you are using appear to integrate an ADSL modem I'm assuming there is no WAN port on them." There's no NAT within the LAN, and all wired connections are connected to LAN ports. It's something wrong with the wireless - wired works fine throughout the whole LAN. Update 06/07/2010 - Response to irrational John 29 June The diagram you've drawn in your answer shows pretty much exactly what I'm trying to do. I've spent another evening trying different things and made some progress but I'm still scratching my head. I've borrowed a Netgear access point and been trying with this, and the strange thing is that my PC is working now - this is a Windows 7 PC connected to the access point in the position of where the DG834G is in the diagram. Meanwhile, however, I have an old Powerbook G4 12" I use for music, and while that has a DHCP-assigned IP address, it's not getting any network throughput to either LAN or internet addresses. To make matters more strange, my phone appears to be intermittently working when it's on the wifi. The access point is a Netgear WPN802v1, DHCP, NAT both switched off, running firmware 2.0.9.0. Last night I set it up with exactly the same settings, and similar to tonight I could get a couple of devices to work, and a couple not to. By the morning, however, everything had stopped working - nothing could get a DHCP IP address. I rebooted the 877W earlier this evening and I'm wondering whether this is why a few things are working now. "Could it be possible that the issue could be with the 877W?" I didn't configure this - is it possible that the DHCP server only likes assigning devices that are immediately attached to it? Or similar, could a firewall be stopping too many addresses that are coming through one device? (ie. the Access Point) This could explain why devices are working at the start but then not by the end. In reply to your questions, "1. I looked at the Netgear DG834G support page. There are five versions of this router. Which version do you have? Netgear usually lists this on the label on the bottom of the router. What version of the firmware does it have?" It's a DG834Gv3, and the firmware is the last on the netgear site version 4.01.40. "3. Not knowing which version you have, I glanced at the reference manual for the DG834G v3. In the section for Wireless Settings under the subsection Wireless Access Point there is a check box for a Wireless Isolation setting. If you have this setting it should be off/unchecked. If it is checked then any device connected via wireless would not be able to talk to any other device on the LAN. This sounds like your problem so maybe this is the cause?" I've checked this and it's switched off. I've made a change to the IP of the access point to something outside the DHCP range - it's now 192.158.153.5, with DHCP starting at 11 and going up to 254. Thanks for the tip about this - I only have a few devices so wouldn't anticipate the DHCP server assigning up to 110, but better safe than sorry. Finally one more thing I thought I should add, is with the Powerbook G4 that's not working - it's getting a DHCP IP address and it can communicate with the WPN802 as I can visit the administration page. Anything further than this, however, it can't reach; I can't administrate the 192.168.153.1 (877W router). Strangely, however, when I open Finder on the same powerbook it's detecting my NAS which is attached directly via wire to the 877W. If I try to browse it, it says connection failed. RE: "Perhaps the problem with your Powerbook is with DNS?.." The IP settings on the powerbook are identical to that of the PC with the exception of the IP address; the PC is 192.168.153.17 and the powerbook is 192.168.153.12. Subnets are the same, 255.255.255.0 and default gateway is the same, .1, and the DNS servers are the same. I administrate the 877W by going to 192.168.153.1 in the browser. This is what isn't working from the Powerbook, despite the PC working fine when I do the same. Meanwhile, however, I can administrate the AP on 192.168.153.5 from both PC and Powerbook Update 06/07/2010 - FINAL RESOLUTION of sorts: First off, sorry for the length of this question. I need start to practice a more concise writing style, so I'm going to try to keep this bit brief. After much fiddling, and with the hugely-appreciated help of irrational John, I have come to the conclusion that it's something wrong with the powerbook. I believe that this was perhaps the reason I doubted things worked at the very beginning. I now have the original DG834Gv3 running both wirelessly and wired, and both wired devices and wireless devices get internet connectivity. The only anomaly is the powerbook which I've had to keep wired, as no matter what I do it refuses to work wirelessly. I still have suspicions that the 877W isn't quite right; I'm fairly sure that if I RJ45 the powerline adapter into a different LAN port on it then everything will break. I've just about run out of patience to test this further, and I think I need to go into the 877W's config to match the 877w's lan port's settings. I'm accepting irrational John's answer as he's been enormously helpful, way above the call of duty, and for this line he wrote: Beats the heck out of me. which in the midst of great frustration made me chuckle, and for a sentence in one of his comments to the same answer: If it is specific to the Powerbook I would put that issue aside until after you feel you have the rest of your LAN and the additional WAP all working together correctlyt It was this second sentence that made me put the powerbook aside and concentrate on the other devices that ultimately led me to getting things working.

  Read the article

• Bacula & Multiple Tape Devices, and so on

  - by Tom O'Connor

  Bacula won't make use of 2 tape devices simultaneously. (Search for #-#-# for the TL;DR) A little background, perhaps. In the process of trying to get a decent working backup solution (backing up 20TB ain't cheap, or easy) at $dayjob, we bought a bunch of things to make it work. Firstly, there's a Spectra Logic T50e autochanger, 40 slots of LTO5 goodness, and that robot's got a pair of IBM HH5 Ultrium LTO5 drives, connected via FibreChannel Arbitrated Loop to our backup server. There's the backup server.. A Dell R715 with 2x 16 core AMD 62xx CPUs, and 32GB of RAM. Yummy. That server's got 2 Emulex FCe-12000E cards, and an Intel X520-SR dual port 10GE NIC. We were also sold Commvault Backup (non-NDMP). Here's where it gets really complicated. Spectra Logic and Commvault both sent respective engineers, who set up the library and the software. Commvault was running fine, in so far as the controller was working fine. The Dell server has Ubuntu 12.04 server, and runs the MediaAgent for CommVault, and mounts our BlueArc NAS as NFS to a few mountpoints, like /home, and some stuff in /mnt. When backing up from the NFS mountpoints, we were seeing ~= 290GB/hr throughput. That's CRAP, considering we've got 20-odd TB to get through, in a <48 hour backup window. The rated maximum on the BlueArc is 700MB/s (2460GB/hr), the rated maximum write speed on the tape devices is 140MB/s, per drive, so that's 492GB/hr (or double it, for the total throughput). So, the next step was to benchmark NFS performance with IOzone, and it turns out that we get epic write performance (across 20 threads), and it's like 1.5-2.5TB/hr write, but read performance is fecking hopeless. I couldn't ever get higher than 343GB/hr maximum. So let's assume that the 343GB/hr is a theoretical maximum for read performance on the NAS, then we should in theory be able to get that performance out of a) CommVault, and b) any other backup agent. Not the case. Commvault seems to only ever give me 200-250GB/hr throughput, and out of experimentation, I installed Bacula to see what the state of play there is. If, for example, Bacula gave consistently better performance and speeds than Commvault, then we'd be able to say "**$.$ Refunds Plz $.$**" #-#-# Alas, I found a different problem with Bacula. Commvault seems pretty happy to read from one part of the mountpoint with one thread, and stream that to a Tape device, whilst reading from some other directory with the other thread, and writing to the 2nd drive in the autochanger. I can't for the life of me get Bacula to mount and write to two tape drives simultaneously. Things I've tried: Setting Maximum Concurrent Jobs = 20 in the Director, File and Storage Daemons Setting Prefer Mounted Volumes = no in the Job Definition Setting multiple devices in the Autochanger resource. Documentation seems to be very single-drive centric, and we feel a little like we've strapped a rocket to a hamster, with this one. The majority of example Bacula configurations are for DDS4 drives, manual tape swapping, and FreeBSD or IRIX systems. I should probably add that I'm not too bothered if this isn't possible, but I'd be surprised. I basically want to use Bacula as proof to stick it to the software vendors that they're overpriced ;) I read somewhere that @KyleBrandt has done something similar with a modern Tape solution.. Configuration Files: *bacula-dir.conf* # # Default Bacula Director Configuration file Director { # define myself Name = backuphost-1-dir DIRport = 9101 # where we listen for UA connections QueryFile = "/etc/bacula/scripts/query.sql" WorkingDirectory = "/var/lib/bacula" PidDirectory = "/var/run/bacula" Maximum Concurrent Jobs = 20 Password = "yourekiddingright" # Console password Messages = Daemon DirAddress = 0.0.0.0 #DirAddress = 127.0.0.1 } JobDefs { Name = "DefaultFileJob" Type = Backup Level = Incremental Client = backuphost-1-fd FileSet = "Full Set" Schedule = "WeeklyCycle" Storage = File Messages = Standard Pool = File Priority = 10 Write Bootstrap = "/var/lib/bacula/%c.bsr" } JobDefs { Name = "DefaultTapeJob" Type = Backup Level = Incremental Client = backuphost-1-fd FileSet = "Full Set" Schedule = "WeeklyCycle" Storage = "SpectraLogic" Messages = Standard Pool = AllTapes Priority = 10 Write Bootstrap = "/var/lib/bacula/%c.bsr" Prefer Mounted Volumes = no } # # Define the main nightly save backup job # By default, this job will back up to disk in /nonexistant/path/to/file/archive/dir Job { Name = "BackupClient1" JobDefs = "DefaultFileJob" } Job { Name = "BackupThisVolume" JobDefs = "DefaultTapeJob" FileSet = "SpecialVolume" } #Job { # Name = "BackupClient2" # Client = backuphost-12-fd # JobDefs = "DefaultJob" #} # Backup the catalog database (after the nightly save) Job { Name = "BackupCatalog" JobDefs = "DefaultFileJob" Level = Full FileSet="Catalog" Schedule = "WeeklyCycleAfterBackup" # This creates an ASCII copy of the catalog # Arguments to make_catalog_backup.pl are: # make_catalog_backup.pl <catalog-name> RunBeforeJob = "/etc/bacula/scripts/make_catalog_backup.pl MyCatalog" # This deletes the copy of the catalog RunAfterJob = "/etc/bacula/scripts/delete_catalog_backup" Write Bootstrap = "/var/lib/bacula/%n.bsr" Priority = 11 # run after main backup } # # Standard Restore template, to be changed by Console program # Only one such job is needed for all Jobs/Clients/Storage ... # Job { Name = "RestoreFiles" Type = Restore Client=backuphost-1-fd FileSet="Full Set" Storage = File Pool = Default Messages = Standard Where = /srv/bacula/restore } FileSet { Name = "SpecialVolume" Include { Options { signature = MD5 } File = /mnt/SpecialVolume } Exclude { File = /var/lib/bacula File = /nonexistant/path/to/file/archive/dir File = /proc File = /tmp File = /.journal File = /.fsck } } # List of files to be backed up FileSet { Name = "Full Set" Include { Options { signature = MD5 } File = /usr/sbin } Exclude { File = /var/lib/bacula File = /nonexistant/path/to/file/archive/dir File = /proc File = /tmp File = /.journal File = /.fsck } } Schedule { Name = "WeeklyCycle" Run = Full 1st sun at 23:05 Run = Differential 2nd-5th sun at 23:05 Run = Incremental mon-sat at 23:05 } # This schedule does the catalog. It starts after the WeeklyCycle Schedule { Name = "WeeklyCycleAfterBackup" Run = Full sun-sat at 23:10 } # This is the backup of the catalog FileSet { Name = "Catalog" Include { Options { signature = MD5 } File = "/var/lib/bacula/bacula.sql" } } # Client (File Services) to backup Client { Name = backuphost-1-fd Address = localhost FDPort = 9102 Catalog = MyCatalog Password = "surelyyourejoking" # password for FileDaemon File Retention = 30 days # 30 days Job Retention = 6 months # six months AutoPrune = yes # Prune expired Jobs/Files } # # Second Client (File Services) to backup # You should change Name, Address, and Password before using # #Client { # Name = backuphost-12-fd # Address = localhost2 # FDPort = 9102 # Catalog = MyCatalog # Password = "i'mnotjokinganddontcallmeshirley" # password for FileDaemon 2 # File Retention = 30 days # 30 days # Job Retention = 6 months # six months # AutoPrune = yes # Prune expired Jobs/Files #} # Definition of file storage device Storage { Name = File # Do not use "localhost" here Address = localhost # N.B. Use a fully qualified name here SDPort = 9103 Password = "lalalalala" Device = FileStorage Media Type = File } Storage { Name = "SpectraLogic" Address = localhost SDPort = 9103 Password = "linkedinmakethebestpasswords" Device = Drive-1 Device = Drive-2 Media Type = LTO5 Autochanger = yes } # Generic catalog service Catalog { Name = MyCatalog # Uncomment the following line if you want the dbi driver # dbdriver = "dbi:sqlite3"; dbaddress = 127.0.0.1; dbport = dbname = "bacula"; DB Address = ""; dbuser = "bacula"; dbpassword = "bbmaster63" } # Reasonable message delivery -- send most everything to email address # and to the console Messages { Name = Standard mailcommand = "/usr/lib/bacula/bsmtp -h localhost -f \"\(Bacula\) \<%r\>\" -s \"Bacula: %t %e of %c %l\" %r" operatorcommand = "/usr/lib/bacula/bsmtp -h localhost -f \"\(Bacula\) \<%r\>\" -s \"Bacula: Intervention needed for %j\" %r" mail = root@localhost = all, !skipped operator = root@localhost = mount console = all, !skipped, !saved # # WARNING! the following will create a file that you must cycle from # time to time as it will grow indefinitely. However, it will # also keep all your messages if they scroll off the console. # append = "/var/lib/bacula/log" = all, !skipped catalog = all } # # Message delivery for daemon messages (no job). Messages { Name = Daemon mailcommand = "/usr/lib/bacula/bsmtp -h localhost -f \"\(Bacula\) \<%r\>\" -s \"Bacula daemon message\" %r" mail = root@localhost = all, !skipped console = all, !skipped, !saved append = "/var/lib/bacula/log" = all, !skipped } # Default pool definition Pool { Name = Default Pool Type = Backup Recycle = yes # Bacula can automatically recycle Volumes AutoPrune = yes # Prune expired volumes Volume Retention = 365 days # one year } # File Pool definition Pool { Name = File Pool Type = Backup Recycle = yes # Bacula can automatically recycle Volumes AutoPrune = yes # Prune expired volumes Volume Retention = 365 days # one year Maximum Volume Bytes = 50G # Limit Volume size to something reasonable Maximum Volumes = 100 # Limit number of Volumes in Pool } Pool { Name = AllTapes Pool Type = Backup Recycle = yes AutoPrune = yes # Prune expired volumes Volume Retention = 31 days # one Moth } # Scratch pool definition Pool { Name = Scratch Pool Type = Backup } # # Restricted console used by tray-monitor to get the status of the director # Console { Name = backuphost-1-mon Password = "LastFMalsostorePasswordsLikeThis" CommandACL = status, .status } bacula-sd.conf # # Default Bacula Storage Daemon Configuration file # Storage { # definition of myself Name = backuphost-1-sd SDPort = 9103 # Director's port WorkingDirectory = "/var/lib/bacula" Pid Directory = "/var/run/bacula" Maximum Concurrent Jobs = 20 SDAddress = 0.0.0.0 # SDAddress = 127.0.0.1 } # # List Directors who are permitted to contact Storage daemon # Director { Name = backuphost-1-dir Password = "passwordslinplaintext" } # # Restricted Director, used by tray-monitor to get the # status of the storage daemon # Director { Name = backuphost-1-mon Password = "totalinsecurityabound" Monitor = yes } Device { Name = FileStorage Media Type = File Archive Device = /srv/bacula/archive LabelMedia = yes; # lets Bacula label unlabeled media Random Access = Yes; AutomaticMount = yes; # when device opened, read it RemovableMedia = no; AlwaysOpen = no; } Autochanger { Name = SpectraLogic Device = Drive-1 Device = Drive-2 Changer Command = "/etc/bacula/scripts/mtx-changer %c %o %S %a %d" Changer Device = /dev/sg4 } Device { Name = Drive-1 Drive Index = 0 Archive Device = /dev/nst0 Changer Device = /dev/sg4 Media Type = LTO5 AutoChanger = yes RemovableMedia = yes; AutomaticMount = yes; AlwaysOpen = yes; RandomAccess = no; LabelMedia = yes } Device { Name = Drive-2 Drive Index = 1 Archive Device = /dev/nst1 Changer Device = /dev/sg4 Media Type = LTO5 AutoChanger = yes RemovableMedia = yes; AutomaticMount = yes; AlwaysOpen = yes; RandomAccess = no; LabelMedia = yes } # # Send all messages to the Director, # mount messages also are sent to the email address # Messages { Name = Standard director = backuphost-1-dir = all } bacula-fd.conf # # Default Bacula File Daemon Configuration file # # # List Directors who are permitted to contact this File daemon # Director { Name = backuphost-1-dir Password = "hahahahahaha" } # # Restricted Director, used by tray-monitor to get the # status of the file daemon # Director { Name = backuphost-1-mon Password = "hohohohohho" Monitor = yes } # # "Global" File daemon configuration specifications # FileDaemon { # this is me Name = backuphost-1-fd FDport = 9102 # where we listen for the director WorkingDirectory = /var/lib/bacula Pid Directory = /var/run/bacula Maximum Concurrent Jobs = 20 #FDAddress = 127.0.0.1 FDAddress = 0.0.0.0 } # Send all messages except skipped files back to Director Messages { Name = Standard director = backuphost-1-dir = all, !skipped, !restored }

  Read the article

• Rounded Rect UIButton without the border

  - by Dave DeLong

  I'm trying to draw a normal rounded rect UIButton, but without the border. Ideally I'd like to be able to change some setting on the UIButton to disable the border. My problem is that if I change the button type to "custom", I don't get the nice blue selection gradient (which I want to keep), and I have no idea how to draw it manually.

  Read the article

< Previous Page | 200 201 202 203 204 205 206 207 208 209 210 211  | Next Page >