Search Results

Search found 8354 results on 335 pages for 'welton v3 50'.

Page 204/335 | < Previous Page | 200 201 202 203 204 205 206 207 208 209 210 211  | Next Page >

  • PASS Summit 2011: Save Money Now

    - by Bill Graziano
    Register by March 31st and save $200.  On April 1st we increase the price.  On July 1st we increase it again.  We have regular price bumps all the way through to the Summit.  You can save yourself $200 if you register by Thursday. In two years of marketing for PASS and a year of finance I’ve learned a fair bit about our pricing, why we do this and how you react to it.  Let me help you save some money! Price bumps drive registrations.  We see big spikes in the two weeks prior to a price increase.  Having a deadline with a cost attached is a great motivator to get people to take action. Registering early helps you and it helps PASS.  You get the exact same Summit at a cheaper rate.  PASS gets smoother cash flow and a better idea of how many people to expect.  We also get people that are already registered that will tell their friends about the conference. This tiered pricing lets us serve those that are very price conscious.  They can register early and take advantage of these discounts.  I know there are people that pay for this conference out of their own pockets.  This is a great way for those people to reduce the cost of the conference.  (And remember for next year that our cheapest pricing starts right after the Summit and usually goes up around the first of the year.) We also get big price bumps after we announce the program and the pre-conference sessions.  If you wrote down the 50 or so best known speakers in the SQL Server community I’m guessing we’ll have nearly all of them at the conference.  We did last year.  I expect we will this year too.  We’re going to have good sessions.  Why wait?  Register today. If you want to attend a pre-conference session you can always add it to your registration later.  Pre-con prices don’t change.  It’s very easy to update your registration and add a pre-conference session later. I want as many people as possible to attend the Summit.  It’s been a great experience for me and I hope it will be for you.  And if you are going to go, do yourself a favor and save some money.  Register today!

    Read the article

  • Oredev 2012: Summary and source code

    - by Laurent Bugnion
    This week, I had the pleasure to be invited to talk at Oredev, a really cool conference taking place in Malmo, Sweden. The whole event is awesome, including a very special dinner on Monday including sauna and swimming in a 6 degrees cold Baltic sea, and a reception with dinner at the town hall, including the mayor himself. Considering Malmo is a town of 300'000 inhabitants, it is a pretty nice occasion and the historical building itself is really worth seeing. For those interested, I placed my pictures on my Flickr account. I had a workshop on Tuesday morning about Windows 8 development with XAML/C#, and then a session on Wednesday about MVVM in Windows Phone 8 and Windows 8, of course using MVVM Light. I was very nervous because I reworked some of my demos as recently as this morning, in the wake of the Build conference last week and the release of both the Windows Phone SDK and MVVM Light V4.1. Everything went well however, and if I judge by the people I talked t after the talk, and Twitter, everything went pretty well. Before my talk on Tuesday, I had the pleasure to see a talk by Iris Classon (@irisclasson) on the challenges of being a "n00b" and a woman in software development. I especially appreciated her research and conclusions on the lack of women I our industry, a topic that is dear to my heart (because I want the best possible future for my two daughters, and also because I really enjoy working with women on projects, and getting a different insight on the art of software development. I really want to thank the excellent organization committee for their hard work and their fantastic welcome to Malmo. In particular Emily Holweck did a wonderful job and was super helpful throughout the preparation and the conference itself. I made a few pictures during my stay, all with the new Nokia Lumia 920, and hope you will enjoy them too. The source code and the slides… The source code is available for download from Skydrive. You will find the following: Windows 8 workshop slides. MVVM Applied slides Source code package with Win8Demo: The demo I built during the 4 hours workshop, with some light MVVM, web services (JSON), GridView, Design time data (Blend / Visual Studio designer), Bing maps integration, location sensor, Search pane integration. SemanticZoomSample: a sample I put together to demonstrate the SemanticZoom control, with two GridViews and of course full design time data for Blend work. Due to time constraints, I was not able to show this demo during the workshop, but I publish it anyway, hoping it will be useful to someone. PictureUploader: The demo I built during my 50 minutes session about MVVM Applied in Windows Phone 8 and Windows 8. Code sharing, design time data, MVVM Light are used in Windows Phone 8 and Windows 8 apps. And in video… You can also see the video of my MVVM talk thanks to the good services of the Oredev team! MVVM Applied in Windows Phone and Windows 8 from Øredev Conference on Vimeo.   Laurent Bugnion (GalaSoft) Subscribe | Twitter | Facebook | Flickr | LinkedIn

    Read the article

  • why client can not receive message from server (java) [migrated]

    - by user1745931
    I have just started learning java. I modified the client side code for a server/client communication program, by creating two threads for the client side, main thread for receiving user's input, and inputThread for receiving server's response. I am sure that server has sent the response to client, however, no response message is obtain at client. Here is my code. Can anyone help me to figure it out? Thanks package clientnio; import java.net.*; import java.nio.*; import java.io.*; import java.nio.channels.*; import java.util.Scanner; public class ClientNIO { public static int bufferLen = 50; public static SocketChannel client; public static ByteBuffer writeBuffer; public static ByteBuffer readBuffer; public static void main(String[] args) { writeBuffer = ByteBuffer.allocate(bufferLen); readBuffer = ByteBuffer.allocate(bufferLen); try { SocketAddress address = new InetSocketAddress("localhost",5505); System.out.println("Local address: "+ address); client=SocketChannel.open(address); client.configureBlocking(false); //readBuffer.flip(); new inputThread(readBuffer); /* String a="asdasdasdasddffasfas"; writeBuffer.put(a.getBytes()); writeBuffer.clear(); int d=client.write(writeBuffer); writeBuffer.flip(); */ while (true) { InputStream inStream = System.in; Scanner scan = new Scanner(inStream); if (scan.hasNext()==true) { String inputLine = scan.nextLine(); writeBuffer.put(inputLine.getBytes()); //writeBuffer.clear(); System.out.println(writeBuffer.remaining()); client.write(writeBuffer); System.out.println("Sending data: "+new String(writeBuffer.array())); writeBuffer.flip(); Thread.sleep(300); } } } catch(Exception e) { System.out.println(e); } } } class inputThread extends Thread { private ByteBuffer readBuffer; public inputThread(ByteBuffer readBuffer1) { System.out.println("Receiving thread starts."); this.readBuffer = readBuffer1; start(); } @Override public void run() { try { while (true) { readBuffer.flip(); int i=ClientNIO.client.read(readBuffer); if(i>0) { byte[] b=readBuffer.array(); System.out.println("Receiving data: "+new String(b)); //client.close(); //System.out.println("Connection closed."); //break; } Thread.sleep(100); } } catch (Exception e) { System.out.println(e); } } }

    Read the article

  • Why my collision detection is not accurate?

    - by optimisez
    After trying and trying, I still cannot understand why the leg of character exceeds the wall but no clipping issue when I hit the wall from below. How should I fix it to make him standstill on the wall? void initPlayer() { // Create texture. hr = D3DXCreateTextureFromFileEx(d3dDevice, "player.png", 169, 44, D3DX_DEFAULT, NULL, D3DFMT_A8R8G8B8, D3DPOOL_MANAGED, D3DX_DEFAULT, D3DX_DEFAULT, D3DCOLOR_XRGB(255, 255, 255), NULL, NULL, &player); playerRect.left = playerRect.top = 0; playerRect.right = 29; playerRect.bottom = 36; playerDest.X = 0; playerDest.Y = 564; playerDest.length = playerRect.right - playerRect.left; playerDest.height = playerRect.bottom - playerRect.top; } void initBox() { hr = D3DXCreateTextureFromFileEx(d3dDevice, "brock.png", 330, 132, D3DX_DEFAULT, NULL, D3DFMT_A8R8G8B8, D3DPOOL_MANAGED, D3DX_DEFAULT, D3DX_DEFAULT, D3DCOLOR_XRGB(255, 255, 255), NULL, NULL, &box); boxRect.left = 33; boxRect.top = 0; boxRect.right = 63; boxRect.bottom = 30; boxDest.X = boxDest.Y = 300; boxDest.length = boxRect.right - boxRect.left; boxDest.height = boxRect.bottom - boxRect.top; } bool spriteCollide(Entity player, Entity target) { float left1, left2; float right1, right2; float top1, top2; float bottom1, bottom2; left1 = player.X; left2 = target.X; right1 = player.X + player.length; right2 = target.X + target.length; top1 = player.Y; top2 = target.Y; bottom1 = player.Y + player.height; bottom2 = target.Y + target.height; if (bottom1 < top2) return false; if (top1 > bottom2) return false; if (right1 < left2) return false; if (left1 > right2) return false; return true; } void collideWithBox() { if ( spriteCollide(playerDest, boxDest) && keyArr[VK_UP]) //playerDest.Y += 50; playerDest.Y = boxDest.Y + boxDest.height; else if ( spriteCollide(playerDest, boxDest) && !keyArr[VK_UP]) playerDest.Y = boxDest.Y - boxDest.height; }

    Read the article

  • CodePlex Daily Summary for Wednesday, September 05, 2012

    CodePlex Daily Summary for Wednesday, September 05, 2012Popular ReleasesDesktop Google Reader: 1.4.6: Sorting feeds alphabetical is now optional (see preferences window)DotNetNuke® Community Edition CMS: 06.02.03: Major Highlights Fixed issue where mailto: links were not working when sending bulk email Fixed issue where uses did not see friendship relationships Problem is in 6.2, which does not show in the Versions Affected list above. Fixed the issue with cascade deletes in comments in CoreMessaging_Notification Fixed UI issue when using a date fields as a required profile property during user registration Fixed error when running the product in debug mode Fixed visibility issue when...Microsoft Ajax Minifier: Microsoft Ajax Minifier 4.65: Fixed null-reference error in the build task constructor.BLACK ORANGE: HPAD TEXT EDITOR 0.9 Beta: HOW TO RUN THE TEXT EDITOR Download the HPAD ARCHIVED FILES which is in .rar format Extract using Winrar Make sure that extracted files are in the same folder Double-Click on HPAD.exe application fileTelerikMvcGridCustomBindingHelper: Version 1.0.15.247-RC2: TelerikMvcGridCustomBindingHelper 1.0.15.247 RC2 Release notes: This is a RC version (hopefully the last one), please test and report any error or problem you encounter. This release is all about performance and fixes Support: "Or" and "Does Not contain" filter options Improved BooleanSubstitutes, Custom Aggregates and expressions-to-queryover Add EntityFramework examples in ExampleWebApplication Many other improvements and fixes Fix invalid cast on CustomAggregates Support for ...ServiceMon - Extensible Real-time, Service Monitoring Utility: ServiceMon Release 0.9.0.44: Auto-uploaded from build serverJavaScript Grid: Release 09-05-2012: Release 09-05-2012xUnit.net Contrib: xunitcontrib-dotCover 0.6.1 (dotCover 2.1 beta): xunitcontrib release 0.6.1 for dotCover 2.1 beta This release provides a test runner plugin for dotCover 2.1 beta, targetting all versions of xUnit.net. (See the xUnit.net project to download xUnit.net itself.) This release adds support for running xUnit.net tests to dotCover 2.1 beta's Visual Studio plugin. PLEASE NOTE: You do NOT need this if you also have ReSharper and the existing 0.6.1 release installed. DotCover will use ReSharper's test runners if available. This release includes th...B INI Sharp Library: B INI Sharp Library v1.0.0.0 Realsed: The frist realsedActive Forums for DotNetNuke CMS: Active Forums 5.0.0 RC: RC release of Active Forums 5.0.Droid Explorer: Droid Explorer 0.8.8.7 Beta: Bug in the display icon for apk's, will fix with next release Added fallback icon if unable to get the image/icon from the Cloud Service Removed some stale plugins that were either out dated or incomplete. Added handler for *.ab files for restoring backups Added plugin to create device backups Backups stored in %USERPROFILE%\Android Backups\%DEVICE_ID%\ Added custom folder icon for the android backups directory better error handling for installing an apk bug fixes for the Runn...BI System Monitor: v2.1: Data Audits report and supporting SQL, and SSIS package Environment Overview report enhancements, improving the appearance, addition of data audit finding indicators Note: SQL 2012 version coming soon.The Visual Guide for Building Team Foundation Server 2012 Environments: Version 1: --Nearforums - ASP.NET MVC forum engine: Nearforums v8.5: Version 8.5 of Nearforums, the ASP.NET MVC Forum Engine. New features include: Built-in search engine using Lucene.NET Flood control improvements Notifications improvements: sync option and mail body View Roadmap for more details webdeploy package sha1 checksum: 961aff884a9187b6e8a86d68913cdd31f8deaf83WiX Toolset: WiX Toolset v3.6: WiX Toolset v3.6 introduces the Burn bootstrapper/chaining engine and support for Visual Studio 2012 and .NET Framework 4.5. Other minor functionality includes: WixDependencyExtension supports dependency checking among MSI packages. WixFirewallExtension supports more features of Windows Firewall. WixTagExtension supports Software Id Tagging. WixUtilExtension now supports recursive directory deletion. Melt simplifies pure-WiX patching by extracting .msi package content and updating .w...Iveely Search Engine: Iveely Search Engine (0.2.0): ????ISE?0.1.0??,?????,ISE?0.2.0?????????,???????,????????20???follow?ISE,????,??ISE??????????,??????????,?????????,?????????0.2.0??????,??????????。 Iveely Search Engine ?0.2.0?????????“??????????”,??????,?????????,???????,???????????????????,????、????????????。???0.1.0????????????: 1. ??“????” ??。??????????,?????????,???????????????????。??:????????,????????????,??????????????????。??????。 2. ??“????”??。?0.1.0??????,???????,???????????????,?????????????,????????,?0.2.0?,???????...GmailDefaultMaker: GmailDefaultMaker 3.0.0.2: Add QQ Mail BugfixSmart Data Access layer: Smart Data access Layer Ver 3: In this version support executing inline query is added. Check Documentation section for detail.DotNetNuke® Form and List: 06.00.04: DotNetNuke Form and List 06.00.04 Don't forget to backup your installation before upgrade. Changes in 06.00.04 Fix: Sql Scripts for 6.003 missed object qualifiers within stored procedures Fix: added missing resource "cmdCancel.Text" in form.ascx.resx Changes in 06.00.03 Fix: MakeThumbnail was broken if the application pool was configured to .Net 4 Change: Data is now stored in nvarchar(max) instead of ntext Changes in 06.00.02 The scripts are now compatible with SQL Azure, tested in a ne...Coevery - Free CRM: Coevery 1.0.0.24: Add a sample database, and installation instructions.New ProjectsA Simple Eng-Hindi CMS: A simple English- Hindi dual language content management system for small business/personal websites.Active Social Migrator: This project for managing the Active Social migration tool.ANSI Console User Control: Custom console control for .NET WinformsAutoSPInstallerGUI: GUI Configuration Tool for SPAutoInstaller Codeplex ProjectCode Documentation Checkin Policy: This checkin policy for Visual Studio 2012 checks if c# code is documented the way it's configured in the config of the policy. Code Dojo/Kata - Free Time Coding: Doing some katas of the Coding Dojo page. http://codingdojo.org/cgi-bin/wiki.pl?KataCataloguefjycUnifyShow: fjycUnifyShowHidden Capture (HC): HC is simple and easy utility to hidden and auto capture desktop or active windowHRC Integration Services: Fake SQL Server Integration Services. LOLKooboo CMS Sites Switcher: Kooboo CMS Sites SwitcherMod.CookieDetector: Orchard module for detecting whether cookies are enabledMyCodes: Created!MySQL Statement Monitor: MySQL Statement Monitor is a monitoring tool that monitors SQL statements transferred over the network.NeoModulusPIRandom: The idea with PI Random is to use easy string manipulation and simple math to generate a pseudo random number. Net Core Tech - Medical Record System: This is a Medical Record System ProjectOraPowerShell: PowerShell library for backup and maintenance of a Oracle Database environment under Microsoft Windows 2008PinDNN: PinDNN is a module that imparts Pinterest-like functionality to DotNetNuke sites. This module works with a MongoDB database and uses the built-in social relatioPyrogen Code Generator: PyroGen is a simple code generator accepting C# as the markup language.restMs: wil be deleted soonScript.NET: Script.NET is a script management utility for web forms and MVC, using ScriptJS-like features to link dependencies between scripts.SpringExample-Pagination: Simple Spring example with PaginationXNA and Component Based Design: This project includes code for XNA and Component Based Design

    Read the article

  • Is my work on a developer test being taken advantage of?

    - by CodeWarrior
    I am looking for a job and have applied to a number of positions. One of them responded, I had a pretty lengthy phone interview (perhaps an hour +) and they then set me up with a developer test. I was told that this test is estimated to take between 6 and 8 hours and that, provided it met with their approval, I could be paid for my work on it. That gave me some pause, but I endeavored. The developer test took place on a VM accessed via RDP. The task was to implement a search page in a web project that requests data from the server, displays it on the screen in a table, has a pretty complicated search filtering scheme (there are about 15 statuses and when sending the search to the server you can search by these statuses) in addition to the string/field search. They want some SVG icons to change color on certain data values, they want some data to be represented differently than how it is in the database, etc. Loooong story short, this took one heck of a lot longer than 6-8 hours. Much of it was due to the very poor VM that I was running on (Visual Studio 2013 took 10 minutes to load, and another 15 minutes to open the 3 GB ginormous solution). After completing, I was told to commit my changes to source control... Hmm, OK. I get an email back that they thought that the SVGs could have their color changed differently, they found a bug in this edge-case, there was an occasional problem with this other thing that I never experienced, etc. So I am 13-14 hours into this thing now, and I have to do bug fixes. I do them, and they come back with some more. This is all apparently going into a production application. I noticed some anomalies in the code that was already in there where it looked like other people had coded all of one functionality and not anything else that I could find. Am I just being used for cheap labor? Even if they pay me the promised 50 dollars and hour for 6 hours, I have committed like 18 hours to this thing now. If I bug fix all of the stuff they keep coming up with, I will have worked at least 16 hours for free. I have taken a number of developer tests. I have never taken one where I worked on code that was destined for production. I have never taken one where I implemented a feature that was in the pipeline for development (it was planned for, and I implemented it through the course of the test). And I have never taken one that took 4 rounds and a total of 20+ hours. I get the impression that they are using their developer test to field some of the functionality, that they don't have time for in their normal team, on the cheap. Also, I wouldn't mind a 'devtest' tag.

    Read the article

  • How do you conquer the challenge of designing for large screen real-estate?

    - by Berin Loritsch
    This question is a bit more subjective, but I'm hoping to get some new perspective. I'm so used to designing for a certain screen size (typically 1024x768) that I find that size to not be a problem. Expanding the size to 1280x1024 doesn't buy you enough screen real estate to make an appreciable difference, but will give me a little more breathing room. Basically, I just expand my "grid size" and the same basic design for the slightly smaller screen still works. However, in the last couple of projects my clients were all using 1080p (1920x1080) screens and they wanted solutions to use as much of that real estate as possible. 1920 pixels across provides just under twice the width I am used to, and the wide screen makes some of my old go to design approaches not to work as well. The problem I'm running into is that when presented with so much space, I'm confronted with some major problems. How many columns should I use? The wide format lends itself to a 3 column split with a 2:1:1 split (i.e. the content column bigger than the other two). However, if I go with three columns what do I do with that extra column? How do I make efficient use of the screen real estate? There's a temptation to put everything on the screen at once, but too much information actually makes the application harder to use. White space is important to help make sense of complex information, but too much makes related concepts look too separate. I'm usually working with web applications that have complex data, and visualization and presentation is key to making sense of the raw data. When your user also has a large screen (at least 24"), some information is out of eye sight and you need to move the pointer a long distance. How do you make sure everything that's needed stays within the visual hot points? Simple sites like blogs actually do better when the width is constrained, which results in a lot of wasted real estate. I kind of wonder if having the text box and the text preview side by side would be a big benefit for the admin side of that type of screen? (1:1 two column split). For your answers, I know almost everything in design is "it depends". What I'm looking for is: General principles you use How your approach to design has changed I'm finding that i have to retrain myself how to work with this different format. Every bump in resolution I've worked through to date has been about 25%: 640 to 800 (25% increase), 800 to 1024 (28% increase), and 1024 to 1280 (25% increase). However, the jump from 1280 to 1920 is a good 50% increase in space--the equivalent from jumping from 640 straight to 1024. There was no commonly used middle size to help learn lessons more gradually.

    Read the article

  • Code testing practice

    - by Robin Castlin
    So now I have come to the conclusion like many others that having some way of constantly testing your code is good practice since it enables fewer people to be involved (colleges and customers alike) by simply knowing what's wrong before someone else finds out the hard way. I've heard and read some about Unit Testing and understand what it's supposed to do and all. The there are so many different types of bugs. It can be everything from web browser not being able not being able to send correct values, javascript failing, a global function messing up a piece of code somewhere to a change that looked good when testing it out but fails in some special case which was hard to anticipate. My simply finding these errors I learn to rarely repeat them again, but there seems to always be new bugs to be found and learnt from. I would guess maybe the best practice would be to run every page and it's functions a couple of times, witness the result and repeat this in Firefox, Chrome and Internet Explorer (and all smartphones apparently) to make sure it works as intended. However this would take quite some time to do consider I don't work with patches/versions and do little fixes here and there a couple of times per week. What I prefer would be some kind of page I can just load that tests as much things as possible to make sure the site works as intended. Basicly just run a lot of cURL's with POST-values and see if I get expected result. But how would I preferably not increase the IDs of every mysql rows if I delete these testing rows? It feels silly to be on ID 1000 with maybe 50 rows in total. If I could build a new project from scratch I would probably implement some kind of smooth way to return a "TRUE" on testing instead of the actual page. But this solution would for the moment being have to be passed on existing projects. My question What would you recommend to be the best way to test my site to make sure that existing functions does their job upon editing the code? Should I consider to implement a lot of edits first, then test manually the entire code to make sure it still works? Is there any nice way of testing codes without "hurting" the ID columns? Extra thoughs Would it be a good idea to associate all of my files to the different parts of my site which they affect? For instance if I edit home.php I will through documentation test if my homepage's start works as intended since it's the only part of my site it should affect.

    Read the article

  • Best practice for organizing/storing character/monster data in an RPG?

    - by eclecto
    Synopsis: Attempting to build a cross-platform RPG app in Adobe Flash Builder and am trying to figure out the best class hierarchy and the best way to store the static data used to build each of the individual "hero" and "monster" types. My programming experience, particularly in AS3, is embarrassingly small. My ultra-alpha method is to include a "_class" object in the constructor for each instance. The _class, in turn, is a static Object pulled from a class created specifically for that purpose, so things look something like this: // Character.as package { public class Character extends Sprite { public var _strength:int; // etc. public function Character(_class:Object) { _strength = _class._strength; // etc. } } } // MonsterClasses.as package { public final class MonsterClasses extends Object { public static const Monster1:Object={ _strength:50, // etc. } // etc. } } // Some other class in which characters/monsters are created. // Create a new instance of Character var myMonster = new Character(MonsterClasses.Monster1); Another option I've toyed with is the idea of making each character class/monster type its own subclass of Character, but I'm not sure if it would be efficient or even make sense considering that these classes would only be used to store variables and would add no new methods. On the other hand, it would make creating instances as simple as var myMonster = new Monster1; and potentially cut down on the overhead of having to read a class containing the data for, at a conservative preliminary estimate, over 150 monsters just to fish out the one monster I want (assuming, and I really have no idea, that such a thing might cause any kind of slowdown in execution). But long story short, I want a system that's both efficient at compile time and easy to work with during coding. Should I stick with what I've got or try a different method? As a subquestion, I'm also assuming here that the best way to store data that will be bundled with the final game and not read externally is simply to declare everything in AS3. Seems to me that if I used, say, XML or JSON I'd have to use the associated AS3 classes and methods to pull in the data, parse it, and convert it to AS3 object(s) anyway, so it would be inefficient. Right?

    Read the article

  • Silverlight and WCF caching

    - by subodhnpushpak
    There are scenarios where Silverlight client calls WCF (or REST) service for data. Now, if the data is cached on the WCF layer, the calls can take considerable resources at the server if NOT cached. Keeping that in mind along with the fact that cache is an cross-cutting aspect, and therefore it should be as easy as possible to put Cache wherever required. The good thing about the solution is that it caches based on the inputs. The input can be basic type of any complex type. If input changes the data is fetched and then cached for further used. If same input is provided again, data id fetched from the cache. The cache logic itself is implemented as PostSharp aspect, and it is as easy as putting an attribute over service call to switch on cache. Notice how clean the code is:        [OperationContract]       [CacheOnArgs(typeof(int))] // based on actual value of cache        public string DoWork(int value)        {            return string.Format("You entered: {0} @ cached time {1}", value, System.DateTime.Now);        } The cache is implemented as POST Sharp as below 1: public override void OnInvocation(MethodInvocationEventArgs eventArgs) 2: { 3: try 4: { 5: object value = new object(); 6: object[] args = eventArgs.GetArgumentArray(); 7: if (args != null || args.Count() > 0) 8: { 9:   10: string key = string.Format("{0}_{1}", eventArgs.Method.Name, XMLUtility<object>.GetDataContractXml(args[0], null));// Compute the cache key (details omitted). 11:   12: 13: value = GetFromCache(key); 14: if (value == null) 15: { 16: eventArgs.Proceed(); 17: value = XMLUtility<object>.GetDataContractXml(eventArgs.ReturnValue, null); 18: value = eventArgs.ReturnValue; 19: AddToCache(key, value); 20: return; 21: } 22:   23:   24: Log(string.Format("Data returned from Cache {0}",value)); 25: eventArgs.ReturnValue = value; 26: } 27: } 28: catch (Exception ex) 29: { 30: //ApplicationLogger.LogException(ex.Message, Source.UtilityService); 31: } 32: } 33:   34: private object GetFromCache(string inputKey) { if (ServerConfig.CachingEnabled) { return WCFCache.Current[inputKey]; } return null; }private void AddToCache(string inputKey,object outputValue) 35: { 36: if (ServerConfig.CachingEnabled) 37: { 38: if (WCFCache.Current.CachedItemsNumber < ServerConfig.NumberOfCachedItems) 39: { 40: if (ServerConfig.SlidingExpirationTime <= 0 || ServerConfig.SlidingExpirationTime == int.MaxValue) 41: { 42: WCFCache.Current[inputKey] = outputValue; 43: } 44: else 45: { 46: WCFCache.Current.Insert(inputKey, outputValue, new TimeSpan(0, 0, ServerConfig.SlidingExpirationTime), true); 47:   48: // _bw.DoWork += bw_DoWork; 49: //string arg = string.Format("{0}|{1}", inputKey,outputValue); 50: //_bw.RunWorkerAsync(inputKey ); 51: } 52: } 53: } 54: }     The cache class can be extended to support Velocity / memcahe / Nache. the attribute can be used over REST services as well. Hope the above helps. Here is the code base for the same.   Please do provide your inputs / comments.

    Read the article

  • Employer admits that its developers are underpaid and undervalued. Time to part ways?

    - by Psionic
    My employer recently posted an opening for a C# Developer with 3-5 years of experience. The requirements and expectations for the position were fair, up until the criteria for salary determination. It was stated clearly that compensation would depend ONLY on experience with C#, and that years of programming experience with other languages & frameworks would be considered irrelevant and not factored in. I brought up my concern with HR that good candidates would see this as a red flag and steer away. I attempted to explain that software development is about much more than specific languages, and that paying someone for their experience in a single language is a very shortsighted approach to hiring good developers (I'm telling this to the HR dept of a software company). The response: "We are tired of wasting time interviewing developers who expect 'big salaries' because they have lots of additional programming experience in languages other than what we require." The #1 issue here is that 'big salaries' = Market Rate. After some serious discussion, they essentially admitted that nobody at the company is paid near market rate for their skills, and there's nothing that can be done about it. The C-suite has the mentality that employees should only be paid for skills proven over years under their watch. Entry-level developers are picked up for less than $38K and may reach 50K after 3 years, which I'm assuming is around what they plan on offering candidates for the C# position. Another interesting discovery (not as relevant) - people 'promoted' to higher responsibilities do not get raises. The 'promotion' is considered an adjustment of the individuals' roles to better suit their 'strengths', which is what they're already being paid for. After hearing these hard truths straight from HR, I would assume that most people who are looking out for themselves would quickly begin searching for a new employer that has a better idea of what they're doing in the industry (this company fails in many other ways, but I don't want to write a book). Here is my dilemma however: This is the first official software development position I've held, for barely 1 year now. My previous position of 3 years was with a very small company where I performed many duties, among them software development (not in my official job description, but I tried very hard to make it so). I've identified local openings that I'm currently qualified for, most paying at least 50% more than I'm getting now. Question is, is it too soon for a jump? I am getting valuable experience in my current position, with no shortage of exciting projects. The work environment is very comfortable, and I'm told by many that I'm in the spotlight of the C-level guys for the stuff that I've been able to accomplish during my short time (for what that's worth). However, there is a clear opportunity cost to staying, knowing now with certainty that I will have to wait 3-5 years only to be capped at what I could potentially be earning elsewhere this year. I am also aware that 'job hopper' is a dangerous label to have, regardless of the reasons.

    Read the article

  • Physics Engine [Collision Response, 2-dimensional] experts, help!! My stack is unstable!

    - by Register Sole
    Previously, I struggle with the sequential impulse-based method I developed. Thanks to jedediah referring me to this paper, I managed to rebuild the codes and implement the simultaneous impulse based method with Projected-Gauss-Seidel (PGS) iterative solver as described by Erin Catto (mentioned in the reference of the paper as [Catt05]). So here's how it currently is: The simulation handles 2-dimensional rotating convex polygons. Detection is using separating-axis test, with a SKIN, meaning closest points between two polygons is detected and determined if their distance is less than SKIN. To resolve collision, simultaneous impulse-based method is used. It is solved using iterative solver (PGS-solver) as in Erin Catto's paper. Error-correction is implemented using Baumgarte's stabilization (you can refer to either paper for this) using J V = beta/dt*overlap, J is the Jacobian for the constraints, V the matrix containing the velocities of the bodies, beta an error-correction parameter that is better be < 1, dt the time-step taken by the engine, and overlap, the overlap between the bodies (true overlap, so SKIN is ignored). However, it is still less stable than I expected :s I tried to stack hexagons (or squares, doesn't really matter), and even with only 4 to 5 of them, they hardly stand still! Also note that I am not looking for a sleeping scheme. But I would settle if you have any explicit scheme to handle resting contacts. That said, I would be more than happy if you have a way of treating it generally (as continuous collision, instead of explicitly as a special state). Ideas I have: I would try adding a damping term (proportional to velocity) to the Baumgarte. Is this a good idea in general? If not I would not want to waste my time trying to tune the parameter hoping it magically works. Ideas I have tried: Using simultaneous position based error correction as described in the paper in section 5.3.2, turned out to be worse than the current scheme. If you want to know the parameters I used: Hexagons, side 50 (pixels) gravity 2400 (pixels/sec^2) time-step 1/60 (sec) beta 0.1 restitution 0 to 0.2 coeff. of friction 0.2 PGS iteration 10 initial separation 10 (pixels) mass 1 (unit is irrelevant for now, i modified velocity directly<-impulse method) inertia 1/1000 Thanks in advance! I really appreciate any help from you guys!! :)

    Read the article

  • Event-Driven Debugging

    - by Brian Donahue
    Most application troubleshooting involves getting an error, analyzing the error message, and at worst, attaching a debugger to work out the real cause. What is not really covered is how to troubleshoot an applicaiton that is not errant, but is having a performance issue, and more than likely, in the middle of the night when you are snug in your bed, sawing logs. What you need is an ever-vigilant cyborg who never sleeps to sit in front of your server all night, but as SkyNet is not live yet, you can settle for the next-best thing. Windows provides performance counters and alerts that can tell you when an applicaiton reaches an unacceptable threshold of naughty behavior, but although it can tattle on your brainchild, it won't be the child psychiatrist that you need to tell you why he's pulling your server's pigtails and pulling faces at the teacher. What you need is to plug a debugger into performance monitor and have it tell you what's going on with your applicaiton at the time. For this purpose, I'd used Microsoft's MDbgEngine as the basis for an applicaiton that will dump a program's stacks, I call it Application Slicer Dicer Wonder Dumper Super Cyborg, or StackOMatic for short. StackOMatic can look at a program's behavior and tell you if the stacks are not moving, but it can also work on the command-line to dump all managed methods on the stack at will. Now that there is a command you can use to dump the stacks, all you need to do is politely tell Windows to run it when you're displeased with your creation as it's trashing the CPU of your server at 3 AM. The first step is to create a scheduled task to tell StackOMatic to dump your applicaiton. Start Task Scheduler and right-click Task Scheduler Library and then Create Task. For this exercise I'm creating a task that will dump the Red Gate SQL Monitor Base Monitor Service. In the Actions tab, I enter the path to StackOMatic and use the arguments to log the stack dump to a file: /PN:RedGate.Response.Engine.Alerting.Base.Service /OUT:c:\users\administrator\MonitorLog.txt Next, I go into Windows Server 2008's Reliability and Performance Monitor and add a new Data Collector Set. This set will produce an alert on the %Processor Time for the service. When the processor time breaches 50%, it will run the StackDumpBaseService task I created. Whenever the service misbehaves, it will append to the log file. Now when I go to work in the morning, I can see what the service was doing when it overloaded the processor and take action.

    Read the article

  • Cocos2D - Detecting collision

    - by Grace
    I am a beginner in cocos2d and im facing a problem with detecting collision for my coins. Sometimes it works sometimes it doesn't. So basically, im creating a game which the user (ship) have to avoid the obstacles and collect coins on the way. The collision of the obstacle works well but not for the coins. I was thinking maybe the loops for creating many coins is the problem but im not sure. Can anyone help? My codes: - (void)update:(ccTime)dt{ double curTime = CACurrentMediaTime(); if (curTime > _nextBridgeSpawn) { float randSecs = [self randomValueBetween:3.0 andValue:5.0]; _nextBridgeSpawn = randSecs + curTime; float randX = [self randomValueBetween:50 andValue:500]; float randDuration = [self randomValueBetween:8.0 andValue:10.0]; CCSprite *bridge = [_bridge objectAtIndex:_nextBridge]; _nextBridge++; if (_nextBridge >= _bridge.count) _nextBridge = 0; [bridge stopAllActions]; bridge.position = ccp(winSize.width/2, winSize.height); bridge.visible = YES; [bridge runAction:[CCSequence actions: [CCMoveBy actionWithDuration:randDuration position:ccp(0, -winSize.height)], [CCCallFuncN actionWithTarget:self selector:@selector(setInvisible:)], nil]]; this is where i declare my coins (continued from the update method) int randCoin = [self randomValueBetween:0 andValue:5]; _coin = [[CCArray alloc] initWithCapacity:randCoin]; for(int i = 0; i < randCoin; ++i) { coin = [CCSprite spriteWithFile:@"coin.png"]; coin.visible = NO; [self addChild:coin]; [_coin addObject:coin]; } float randCoinX = [self randomValueBetween:winSize.width/5 andValue:winSize.width - (border.contentSize.width *2)]; float randCoinY = [self randomValueBetween:100 andValue:700]; float randCoinPlace = [self randomValueBetween:30 andValue:60]; for (int i = 0; i < _coin.count; ++i) { CCSprite *coin2 = [_coin objectAtIndex:i]; coin2.position = ccp(randCoinX, (bridge.position.y + randCoinY) + (randCoinPlace *i)); coin2.visible = YES; [coin2 runAction:[CCSequence actions: [CCMoveBy actionWithDuration:randDuration position:ccp(0, -winSize.height-2000)], [CCCallFuncN actionWithTarget:self selector:@selector(setInvisible:)], nil]]; } } this is to check for collision (also in the update method) for (CCSprite *bridge in _bridge) { if (!bridge.visible) continue; if (CGRectIntersectsRect(ship.boundingBox, bridge.boundingBox)){ bridge.visible = NO; [ship runAction:[CCBlink actionWithDuration:1.0 blinks:5]]; } } } //this is the collision for coins which only work at times for (CCSprite *coin2 in _coin) { if (!coin2.visible) continue; if (CGRectIntersectsRect(ship.boundingBox, coin2.boundingBox)) { NSLog(@"Coin collected"); coin2.visible = NO; } } } Thank you.

    Read the article

  • Why is my collision detection not accurate?

    - by optimisez
    After trying and trying, I still cannot understand why the leg of character exceeds the wall but no clipping issue when I hit the wall from below. How should I fix it to make him stand still on the wall? From collideWithBox() function below, it shows that playerDest.Y = boxDest.Y - boxDest.height; will get the position the character should standstill on the wall. Theoretically, the clipping effect won't be happen as the character hit the box from below works with the equation playerDest.Y = boxDest.Y + boxDest.height;. void collideWithBox() { if ( spriteCollide(playerDest, boxDest) && keyArr[VK_UP]) //playerDest.Y += 50; playerDest.Y = boxDest.Y + boxDest.height; else if ( spriteCollide(playerDest, boxDest) && !keyArr[VK_UP]) playerDest.Y = boxDest.Y - boxDest.height; } void initPlayer() { // Create texture. hr = D3DXCreateTextureFromFileEx(d3dDevice, "player.png", 169, 44, D3DX_DEFAULT, NULL, D3DFMT_A8R8G8B8, D3DPOOL_MANAGED, D3DX_DEFAULT, D3DX_DEFAULT, D3DCOLOR_XRGB(255, 255, 255), NULL, NULL, &player); playerRect.left = playerRect.top = 0; playerRect.right = 29; playerRect.bottom = 36; playerDest.X = 0; playerDest.Y = 564; playerDest.length = playerRect.right - playerRect.left; playerDest.height = playerRect.bottom - playerRect.top; } void initBox() { hr = D3DXCreateTextureFromFileEx(d3dDevice, "brock.png", 330, 132, D3DX_DEFAULT, NULL, D3DFMT_A8R8G8B8, D3DPOOL_MANAGED, D3DX_DEFAULT, D3DX_DEFAULT, D3DCOLOR_XRGB(255, 255, 255), NULL, NULL, &box); boxRect.left = 33; boxRect.top = 0; boxRect.right = 63; boxRect.bottom = 30; boxDest.X = boxDest.Y = 300; boxDest.length = boxRect.right - boxRect.left; boxDest.height = boxRect.bottom - boxRect.top; } bool spriteCollide(Entity player, Entity target) { float left1, left2; float right1, right2; float top1, top2; float bottom1, bottom2; left1 = player.X; left2 = target.X; right1 = player.X + player.length; right2 = target.X + target.length; top1 = player.Y; top2 = target.Y; bottom1 = player.Y + player.height; bottom2 = target.Y + target.height; if (bottom1 < top2) return false; if (top1 > bottom2) return false; if (right1 < left2) return false; if (left1 > right2) return false; return true; }

    Read the article

  • Are there software options (preferabbly .NET) for doing distance and speed analysis of footballers moving on video?

    - by Anonymous Type
    Editing Question for Clarity Thanks for feedback so far, very insightful. I'm not sure how far along this part of the software community is, and what if any libraries exist for me to leverage from. Heres what I'm trying to do. Problem: Take an existing video of a game of rugby league. The Rugby League field is 100 metres long, 70 metres wide, and has white line markings every 10 metres running along the width of the field, as well as along the sidelines. Each side has 13 players on the field. Players on each team have identical jerseys that normally constrast strongly against background colours (green/brown field colour) and the referee's colour (usually yellow) and the designated water runner (orange). All players have a unique number in thick white lettering on their backs for identification. Video is taken with a high definition camera. Currently only one camera is used (2D) and existing video does not contain a foreground object of fixed spatial dimensions (as suggested in one answer for comparision measurements, however I could add this to future filming sessions if it is worthwhile). The player's do not run in a straight line 50% of the time but will go sideways on on a diagonal to the play the ball. The distance measured always starts from the spot of the previous "tackle", which ends where the player stops forward movement. It is not always possible to determine the players number from the video (facing other direction, sunlight, others standing in the way of the camera). But this isn't important as the software could allow for manual inputting of unknown "runs" at a later point after analysis. Determine the distance between two points (i.e. where the player started his "run" and where he finished it). I'm guessing that this would be quite doable if I manually marked the start and end point in the video. But how would I use landmarks in the background to determine the distance (assuming the person taking the video has kept it from jerking around). Question: Do software packages or libraries exist that are specialised enough to assist with writing analysis software to determine a sports persons distance travelled based on video taken of the performance?

    Read the article

  • High traffic chat - how to check if there is new message and show it for all users

    - by user2633999
    I already had question about this but obviously it was not accepted very well, apparently too long when it's actually more information so you could have given me better answer. Ok, I will be much clearer now. Best possible logic to develop scalable chat in terms of stability, storing/reading messages on chat, updating chat on new message for all users etc.? I have most of this developed, the logic I think I miss is -- check if there is new message and show it for all users. I have this implemented but it crashes the site due to its traffic of 300k-400k people, so that's my main question. The chat is PHP based and uses Pusher (www.pusher.com) for instant messaging but it lacks what I need because it's more like a websocket. I'm using hardcoded files to keep messages (want to avoid database as much as possible). It's a no extension type of file, I'm sure you know. I'm getting crash with $fp = fopen(..., "w"); // pretend ... is the path and filename fwrite($fp, $msg); //hardcode the message fclose($fp); where $msg is the message itself. I'm having 1 file per message. I show last 150 messages = 150 file accesses and reads, yeah it's too much I guess. I have better logic now which I'm pursuing and that is 1 file with last 50-100 messages at all time. Sure it should be much better. How does it crash, that's the trickiest part because everything seems ordinary, believe me it is difficult to determine what exactly crashes the site, but in like 5 minutes when I try to open the site it's gone, then I put the old content without chat and is back online again. I'm having jquery post every 1 second to check if there is new message. I'm using timestamp in a special file where I keep the time last message was sent and if ((time() - time in file) <= 2) = reload last 150 messages including the last one. Too much input/output, write/read or however to say it I think is what crashes the site.

    Read the article

  • Misused mke2fs and cannot boot into system

    - by surlogics
    I installed Ubuntu with WUBI in Windows 7 64bit, and I had installed Mandriva 2011 with a disk. I tried to learn Linux with Ubuntu and misused mke2fs; after I reboot my computer, Windows 7 and Ubuntu has crashed. As I have Mandriva, I boot into Mandriva and found # df -h /dev/sda7 12G 9.8G 1.5G 88% / /dev/sda2 15G 165M 14G 2% /media/logical /dev/sda6 119G 88G 32G 74% /media/2C9E85319E84F51C /dev/sda5 118G 59G 60G 50% /media/D25A6DDE5A6DBFB9 /dev/sda9 100G 188M 100G 1% /media/ae69134a-a65e-488f-ae7f-150d1b5e36a6 /dev/sda1 100M 122K 100M 1% /media/DELLUTILITY /dev/sda3 98G 81G 17G 83% /media/OS # fdisk /dev/sda Command (m for help): p Disk /dev/sda: 500.1 GB, 500107862016 bytes 255 heads, 63 sectors/track, 60801 cylinders, total 976773168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0xd24f801e Device Boot Start End Blocks Id System /dev/sda1 2048 206847 102400 6 FAT16 /dev/sda2 * 206848 30926847 15360000 7 HPFS/NTFS/exFAT /dev/sda3 30926848 235726847 102400000 7 HPFS/NTFS/exFAT /dev/sda4 235728864 976771071 370521104 f W95 Ext'd (LBA) /dev/sda5 235728896 481488895 122880000 7 HPFS/NTFS/exFAT /dev/sda6 727252992 976771071 124759040 7 HPFS/NTFS/exFAT /dev/sda7 481500243 506674034 12586896 83 Linux /dev/sda8 506674098 514851119 4088511 82 Linux swap / Solaris /dev/sda9 514851183 727246484 106197651 83 Linux Partition table entries are not in disk order I think I may used the following command mke2fs -j -L "logical"/dev/sda2 but I had forgotten what kind of partition it was before I transfered it into ext3. perhaps ntfs Data was not lost, and I can view my files as I could in Windows. In Mandriva, there are following disks: 117.2 GB hard disk, files in it is the same as my Windows D:, and Ubuntu was installed in it; 119.0 GB hard disk is my G:, with my personal files in it; 12.0 GB is the same with Mandriva / (with means root), 101.3 GB hard disk with nothing but lost+found; DELLUTILITY should be Dell computer utilities pre-installed in my computer; logical is the disk which I had spoiled, I can view nothing but lost+found; and OS is the C: in my Windows. After I boot, grub lets me choose Mandriva or Windows. I chose Windows and it tells me: FILE system type unknown, partition type 0x7 Error 13: Invalid or unsupported executable format I doubt something wrong with windows MBR or something # cat /boot/grub/menu.lst timeout 5 color black/cyan yellow/cyan gfxmenu (hd0,6)/boot/gfxmenu default 0 title linux kernel (hd0,6)/boot/vmlinuz BOOT_IMAGE=linux root=UUID=199581b7-ac7e-4c5f-9888-24c4f213cad8 nokmsboot logo.nologo quiet resume=UUID=34c546e4-9c42-4526-aa64-bbdc0e9d64fd splash=silent vga=788 initrd (hd0,6)/boot/initrd.img title linux-nonfb kernel (hd0,6)/boot/vmlinuz BOOT_IMAGE=linux-nonfb root=UUID=199581b7-ac7e-4c5f-9888-24c4f213cad8 nokmsboot resume=UUID=34c546e4-9c42-4526-aa64-bbdc0e9d64fd initrd (hd0,6)/boot/initrd.img title failsafe kernel (hd0,6)/boot/vmlinuz BOOT_IMAGE=failsafe root=UUID=199581b7-ac7e-4c5f-9888-24c4f213cad8 nokmsboot failsafe initrd (hd0,6)/boot/initrd.img title windows root (hd0,1) makeactive chainloader +1 I can boot into Linux, but not Ubuntu, it boot into Mandriva. I don't have a boot disk. Help me find a way to make it work again.

    Read the article

  • Looking for an algorithm to connect dots - shortest route

    - by e4ch
    I have written a program to solve a special puzzle, but now I'm kind of stuck at the following problem: I have about 3200 points/nodes/dots. Each of these points is connected to a few other points (usually 2-5, theoretical limit is 1-26). I have exactly one starting point and about 30 exit points (probably all of the exit points are connected to each other). Many of these 3200 points are probably not connected to neither start nor end point in any way, like a separate net, but all points are connected to at least one other point. I need to find the shortest number of hops to go from entry to exit. There is no distance between the points (unlike the road or train routing problem), just the number of hops counts. I need to find all solutions with the shortest number of hops, and not just one solution, but all. And potentially also solutions with one more hop etc. I expect to have a solution with about 30-50 hops to go from start to exit. I already tried: 1) randomly trying possibilities and just starting over when the count was bigger than a previous solution. I got first solution with 3500 hops, then it got down to about 97 after some minutes, but looking at the solutions I saw problems like unnecessary loops and stuff, so I tried to optimize a bit (like not going back where it came from etc.). More optimizations are possible, but this random thing doesn't find all best solutions or takes too long. 2) Recursively run through all ways from start (chess-problem-like) and breaking the try when it reached a previous point. This was looping at about a length of 120 nodes, so it tries chains that are (probably) by far too long. If we calculate 4 possibilities and 120 nodes, we're reaching 1.7E72 possibilities, which is not possible to calculate through. This is called Depth-first search (DFS) as I found out in the meantime. Maybe I should try Breadth-first search by adding some queue? The connections between the points are actually moves you can make in the game and the points are how the game looks like after you made the move. What would be the algorithm to use for this problem? I'm using C#.NET, but the language shouldn't matter.

    Read the article

  • Agile team with no dedicated Tester members. Insane or efficient?

    - by MetaFight
    I'm a software developer. I've been thinking a lot about the efficiency of the Software Testers I've worked with so far in my career. In fact, I've been thinking a lot about the Software Testers role in general and have reached a potentially contentious conclusion: Non-developer Software Testers staff are less efficient at software testing than developers. Now, before everyone gets upset, hear me out. This isn't mere opinion: Software Testing and Software Development both require a lot of skills in common: Problem solving Thinking about corner cases Analytical skills The ability to define clear and concise step-by-step scenarios What developers have in addition to this is the ability to automate their tests. Yes, I know non-dev testers can automate their tests too, but that often then becomes a test maintenance issue. Because automating UI tests is essentially programming, non-dev members encounter all the same difficulties software developers encounter: Copy-pasta, lack of code reusibility/maintainability, etc. So, I was wondering. Why not replace all non-dev roles with developer roles? Developers have the skills required to perform Software Testing tasks, and they have the skills to automate tests and keep them maintainable. Would the following work: Hire a bunch of developers and split them into 2 roles: Software developers Software developers doing testing (some manual, mostly automated by writing integration tests, unit tests, etc) Software developers doing application support. (I've removed this as it is probably a separate question altogether) And, in our case since we're doing Agile development, rotate the roles every sprint or two. Also, if at all possible, try to have people spend their Developer stints and Testing stints on different projects. Ideally you would want to reduce the turnover rate per rotation. So maybe you could have 2 groups and make sure the rotation cycles of the groups are elided. So, for example, if each rotation was two sprints long, the two groups would have their rotations 1 sprint apart. That way there's only a 50% turn-over rate per sprint. Am I crazy, or could this work? (Obviously a key component to this working is that all devs want to be in the 3 roles. Let's assume I'm starting a new company and I can hire these ideal people) Edit I've removed the phrase "QA", as apparently we are using it incorrectly where I work.

    Read the article

  • PMDB Block Size Choice

    - by Brian Diehl
    Choosing a block size for the P6 PMDB database is not a difficult task. In fact, taking the default of 8k is going to be just fine. Block size is one of those things that is always hotly debated. Everyone has their personal preference and can sight plenty of good reasons for their choice. To add to the confusion, Oracle supports multiple block sizes withing the same instance. So how to decide and what is the justification? Like most OLTP systems, Oracle Primavera P6 has a wide variety of data. A typical table's average row size may be less than 50 bytes or upwards of 500 bytes. There are also several tables with BLOB types but the LOB data tends not to be very large. It is likely that no single block size would be perfect for every table. So how to choose? My preference is for the 8k (8192 bytes) block size. It is a good compromise that is not too small for the wider rows, yet not to big for the thin rows. It is also important to remember that database blocks are the smallest unit of change and caching. I prefer to have more, individual "working units" in my database. For an instance with 4gb of buffer cache, an 8k block will provide 524,288 blocks of cache. The following SQL*Plus script returns the average, median, min, and max rows per block. column "AVG(CNT)" format 999.99 set verify off select avg(cnt), median(cnt), min(cnt), max(cnt), count(*) from ( select dbms_rowid.ROWID_RELATIVE_FNO(rowid) , dbms_rowid.ROWID_BLOCK_NUMBER(rowid) , count(*) cnt from &tab group by dbms_rowid.ROWID_RELATIVE_FNO(rowid) , dbms_rowid.ROWID_BLOCK_NUMBER(rowid) ) Running this for the TASK table, I get this result on a database with an 8k block size. Each activity, on average, has about 19 rows per block. Enter value for tab: task AVG(CNT) MEDIAN(CNT) MIN(CNT) MAX(CNT) COUNT(*) -------- ----------- ---------- ---------- ---------- 18.72 19 3 28 415917 I recommend an 8k block size for the P6 transactional database. All of our internal performance and scalability test are done with this block size. This does not mean that other block sizes will not work. Instead, like many other parameters, this is the safest choice.

    Read the article

  • Is my work on a developers test being taken advantage of?

    - by CodeWarrior
    I am looking for a job and have applied to a number of positions. One of them responded, I had a pretty lengthy phone interview (perhaps an hour +) and they then set me up with the developers test. I was told that this test is estimated to take between 6 and 8 hours and that, provided it met with their approval, I could be paid for my work on it. That gave me some pause, but I endeavored. The dev test took place on a VM accessed via RDP. The task was to implement a search page in a web project that requests data from the server, displays it on the screen in a table, has a pretty complicated search filtering scheme (there are about 15 statuses and when sending the search to the server you can search by these statuses) in addition to the string/field search. They want some SVG icons to change color on certain data values, they want some data to be represented differently than how it is in the database, etc. Loooong story short, this took one heck of a lot longer than 6-8 hours. Much of it was due to the very poor VM that I was running on (Visual Studio 2013 took 10 minutes to load, and another 15 minutes to open the 3 GB ginormous solution). After completing, I was told to commit my changes to source control... Hmm, OK. I get an email back that they thought that the SVGs could have their color changed differently, they found a bug in this edge-case, there was an occasional problem with this other thing that I never experienced, etc. So I am 13-14 hours into this thing now and I have to do bug fixes. I do them, and they come back with some more. This is all apparently going into a production application. I noticed some anomalies in the code that was already in there where it looked like other people had coded all of one functionality and not anything else that I could find. Am I just being used for cheap labor? Even if they pay me the promised 50 dollars and hour for 6 hours, I have committed like 18 hours to this thing now. If I bug fix all of the stuff they keep coming up with, I will have worked at least 16 hours for free. I have taken a number of dev tests. I have never taken one where I worked on code that was destined for production. I have never taken one where I implemented a feature that was in the pipeline for development (it was planned for, and I implemented it through the course of the test). And I have never taken one that took 4 rounds and a total of 20+ hours. I get the impression that they are using their dev test to field some of the functionality, that they don't have time for in their normal team, on the cheap. Also, I wouldn't mind a 'devtest' tag.

    Read the article

  • Oracle Data Protection: How Do You Measure Up? - Part 1

    - by tichien
    This is the first installment in a blog series, which examines the results of a recent database protection survey conducted by Database Trends and Applications (DBTA) Magazine. All Oracle IT professionals know that a sound, well-tested backup and recovery strategy plays a foundational role in protecting their Oracle database investments, which in many cases, represent the lifeblood of business operations. But just how common are the data protection strategies used and the challenges faced across various enterprises? In January 2014, Database Trends and Applications Magazine (DBTA), in partnership with Oracle, released the results of its “Oracle Database Management and Data Protection Survey”. Two hundred Oracle IT professionals were interviewed on various aspects of their database backup and recovery strategies, in order to identify the top organizational and operational challenges for protecting Oracle assets. Here are some of the key findings from the survey: The majority of respondents manage backups for tens to hundreds of databases, representing total data volume of 5 to 50TB (14% manage 50 to 200 TB and some up to 5 PB or more). About half of the respondents (48%) use HA technologies such as RAC, Data Guard, or storage mirroring, however these technologies are deployed on only 25% of their databases (or less). This indicates that backups are still the predominant method for database protection among enterprises. Weekly full and daily incremental backups to disk were the most popular strategy, used by 27% of respondents, followed by daily full backups, which are used by 17%. Interestingly, over half of the respondents reported that 10% or less of their databases undergo regular backup testing.  A few key backup and recovery challenges resonated across many of the respondents: Poor performance and impact on productivity (see Figure 1) 38% of respondents indicated that backups are too slow, resulting in prolonged backup windows. In a similar vein, 23% complained that backups degrade the performance of production systems. Lack of continuous protection (see Figure 2) 35% revealed that less than 5% of Oracle data is protected in real-time.  Management complexity 25% stated that recovery operations are too complex. (see Figure 1)  31% reported that backups need constant management. (see Figure 1) 45% changed their backup tools as a result of growing data volumes, while 29% changed tools due to the complexity of the tools themselves. Figure 1: Current Challenges with Database Backup and Recovery Figure 2: Percentage of Organization’s Data Backed Up in Real-Time or Near Real-Time In future blogs, we will discuss each of these challenges in more detail and bring insight into how the backup technology industry has attempted to resolve them.

    Read the article

  • Oracle Solaris 11 ?????????:?Oracle Solaris 11 ?????·????·??? ?2????

    - by kazun
    2012?2?20???????????? ??13F????????????Oracle Solaris 11???????????Oracle Solaris 11 ?????·????·????????????????????????2??????????Automated Installer(AI)???Distribution Constructor??????????????????????????????50????????????????????????????????? Oracle Solaris 11 ????????? - ?????????????????? - ???????????????????????? - 2????????????????? ???? Oracle 11 ??????? ?Oracle Solaris 11 ??????????????·??????????(???????? ??????????? ????????????? ??? ??? ??:???)???Oracle Solaris 11????????????????????????? Oracle Solaris 11 ???Oracle Solaris 10 ??????????????????????????2?????????????????(????????GUI???)???????????????????????????????????????????????????????????????????????????????????????????????????????????? ?????????? ???????????????:Automated Installer ????????"hands-free"??????????? Automated Installer?(?? ???????????? ??????????? ?????????????? ??????????????:???)???Oracle Solaris 11 ???????Automated Installer (AI)????????? AI????????????????????Solaris Zones ???????????????????????????????????????????????????????????????????????????????????????Jumpstart ?????????????????? AI?Image Packaging System (IPS)????????????????????????????????????OS???????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????AI??????(XML?????????????)?SC???????????????????????????????????????????????????????????????????????? ??????????????????????????????????AI ???????????DHCP ????????????????????????????? VirtualBox ??????????????? ?:Oracle Solaris Studio ??? AI??????????????????????? ?????????? ???????????????????:Distribution Constructor ?????????????????????????????????????????????? Distribution Constructor?(?? ???????????? ??????????? ????????????? ??????????????:???)???? ?????????Oracle Solaris 11 ????????????????????????????????????? "Distribution Constructor" ?????????????"Distribution Constructor" ???????????????????????????????????????????????????????????????????????????"Distribution Constructor"???LiveCD/USB???????????????ISO?????3???OS?????????????????????Distribution Constructor?????????????????????????????????????????????????????????????????????Distribution Constructor??Solaris ?ZFS???????????AI??????????????????????????XML??????????? ?????????3??????????????????????????????????????????????????????IPS??????????????custom-script????????????????????????????????????????????????????????????????????????? ???????????????????????????????? ?????????? Oracle Solaris ??????? ??????????Installer Disk(3??DVD)????????????????????????Oracle Solaris Live CD(x86)??1???Oracle Solaris 11 Interactive Text Installer??SPARC??x86?????1???????????Live CD??????????Solaris 11 ?????????????????????Interactive Text Installer ??????????????(???????????????????????????????)?Interactive Text Installer ???????????????????????????????????? ???Solaris 11 VM???? for Oracle VM VirtualBox ?????????????????????(?Solaris 11 VM ???? for Oracle VM VirtualBox ???????Oracle VM for x86 ????????)? Oracle VM VirtualBox??????? Solaris 11 VM???? for Oracle VM VirtualBox??????? Oracle Solaris 11?????????????????????????? ?????? Oracle Solaris 10 JumpStart ?? Oracle Solaris 11 ???????????? ???? Oracle Solaris 11 ????????????? Oracle Solaris 11 ???????????

    Read the article

  • ???? : ?????????????????????????? ~??????????????????SCSK??????

    - by Shinji Watanabe
    ??????????????????????????????????????????·?????????????????????????????????????Web??????????????????????????????????·??????????????? ?????????????·???????????????????????Web CMS?EC????????????????????????????????????????????????????????Web??????????????????·???????????????Web??????????????????????????????·??????????Web???????????????? ???????? ?? 2012?10?10?(?)14:00~17:15(??13:30~) ?? Web?????????????????-·??????????????????????Web????????????????????????????????·??????????Web????????????????????????????Web???????????????Web?????????????????????????????? ?? ???????????????????2-4-27 ????? 9F???:??? ???? ?????? 10????? ??5???????? ??3?(????????????????)JR? ????? ?????? ??10?JR??? ?????? ????? ??5??? ???? ?????? 7????? ??5?????? ?? ?? ?? 50????????????????????????????????????????????????????????????????(??????????????????????????????????)?????????????????????????????????????????????????????????????????????????????????????????????????????1?2???????????????????????????????????? ?? ??????????????????????????SCSK???? ???????? ????????? ????? 13:30-14:00 ?? 14:00-14:10 1)??????????????? Fusion Middleware?????? ????/??????? ? ? 14:10-15:00 2)?User Experience ??? ~ ????????????????????????????????? ????????CEO ?? ????????????????????????????????????????????·?????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????? 15:00-15:45 3)?B2C?B2B?????!?????????????????????3?????????????? ?????????????? CRM/HCM???????????? ?? ?? ?E?????????????????????????????????????????????????????????????B2B?B2C?????????????????????????????????????????????? ????????????????????????????????????????????????????? ???????????????????????????????????????????3??????????? 15:45-16:00 ?? 16:00-16:45 4)????????????????No.1 ??????????????????????SCSK???? ?????????? ??????????????????????? WEB???????? ??? ? ? ????????????????Web????PfizerPRO??????????????????????????????????????????????????????????????????????????????????????????????????????????????? ????No.1(?)? ???? ???????????SCSK??????Web???????????????????????????????????????????????????????????????????????????????????????????????????? ???:??????·??·???2011?12?14??? 2011?7~9????????????????? 16:45-17:15 5)????Web????????????????~???????????????????????????~?SCSK???? IT??????????? ???????????????? ?? ??????????????????????????????????????Web????????????????????????????????????????????CMS????????Web???????????????????????????????????????????? ??????????????????????????????

    Read the article

< Previous Page | 200 201 202 203 204 205 206 207 208 209 210 211  | Next Page >