Search Results

Search found 16106 results on 645 pages for 'custom channel'.

Page 205/645 | < Previous Page | 201 202 203 204 205 206 207 208 209 210 211 212  | Next Page >

• AIX: iscsi volumes disappear after reboot

  - by Dan

  We have an IBM P505 AIX box, with two internal disks and a defined iSCSI volume. The iSCSI volume is defined in it's own volume group, and is connected to an IBM iSCSI DS3300 disk array via the secondary onboard ethernet port (ie, we're not using a dedicated HBA, we're using the second onboard ethernet port for iSCSI exclusively.) When we reboot the AIX box, the iSCSI volume doesn't get mounted (which is fine; I've figured out that it fails to mount because AIX tries mounting it's volumes before starting the networking stack.) The problem is, after the server has booted it fails to redetect the iSCSI target as a physical disk. This means the volume group (iscsivg) can't go online. if I run cfgmgr -v to redetect the iscsi volume it successfully detects the iscsi target volume and creates a physical volume reference, but allocates it a different volume ID to what was defined before. eg - rootvg contains hdisk 0 and 1 iscsivg was originally defined with hdisk2 as the physical iSCSI volume. after reboot and running cfgmgr -v, AIX detects physical volumes hdisk0, hdisk11 and hdisk3. As there's no hdisk2, I can't varyon the iscsivg volume group. I can't seem any existing hdisk2 definition in the ODM. I can't easily add or change the definition of the physcial disk in the iscsivg volume group as it won't "varyon". Exporting the volume group deletes it completely, recreating the volume group by "importing" it from the reallocated disk makes it available again, but surely there's a better way? Can I force a specific hdisk drive designation for an iscsi target? How do you bring online iSCSI volumes after a reboot? I assume this "just works" with a dedicated HBA instead of a generic ethernet adapter? By the way, the iSCSI volume works fine once it's mounted; we only have problems getting it working - and only with AIX. The iSCSI array works fine with our Linux and Windows servers; ie the volumes get detected and remounted after boot time without any problems, using generic ethernet adapters. Here's some of the config from the AIX box: defined disks / devices: # lsdev hdisk0 Available 06-08-01-5,0 16 Bit LVD SCSI Disk Drive hdisk1 Available 06-08-01-8,0 16 Bit LVD SCSI Disk Drive hdisk3 Available Other iSCSI Disk Drive iscsi0 Available iSCSI Protocol Device scsi0 Available 06-08-00 PCI-X Dual Channel Ultra320 SCSI Adapter bus scsi1 Available 06-08-01 PCI-X Dual Channel Ultra320 SCSI Adapter bus ses0 Available 06-08-01-15,0 SCSI Enclosure Services Device sisscsia0 Available 06-08 PCI-X Dual Channel Ultra320 SCSI Adapter iscsi target definition in /etc/iscsi/targets: # IBM DS3300 disk array # port 1 on second controller 10.10.xx.xxx 3260 iqn.1992-01.com.lsi:1535.600a0b80005b0a7fxxxxxxxxxxxx physical volumes (after reimporting the volume group) # lspv hdisk0 0003b08a0d4936b6 rootvg active hdisk1 0003b08aaa5cb366 rootvg active hdisk3 0003b08a032d04bb iscsivg active

  Read the article

• Recommended SpamAssassin update channels?

  - by Timo Geusch

  I'm currently using SpamAssassin on a couple of mail servers that I look after. SpamAssassin runs in the context of amavisd-new on those servers and with the usual bunch of plugins (FuzzyOCR, DCC, pyzor, razor). Currently the servers are getting their rule updates from the default SpamAssassin update channel (updates.spamassassin.org). Overall the setup seems to be reasonably effective but some types of spam seem to wander right through it even though I've made repeated attempts at training spamassassin. My guesstimate is that about 85%-90% of the spam that gets through policyd-weight makes it through the filters and it's been getting a lot worse recently as spammers are getting better at working their way through filters. Can someone recommend additional sources of filters to make SpamAssassin more effective? So far I've found OpenProtect's update channel but are there others worth looking at?

  Read the article

• PSTN Trunk TDM400P Install on Asterisk / Trixbox

  - by Jona

  Hey All, I'm trying to get a TDM400P card with FXO module to connect to our PSTN line. The card is correctly detected by Linux: [trixbox1.localdomain asterisk]# lspci 00:09.0 Communication controller: Tiger Jet Network Inc. Tiger3XX Modem/ISDN interface And asterisk can see the channel: > trixbox1*CLI> dahdi show channel 1 > Channel: 1LI> File Descriptor: 14 > Span: 11*CLI> Extension: I> Dialing: > noI> Context: from-pstn Caller ID: I> > Calling TON: 0 Caller ID name: > Mailbox: none Destroy: 0LI> InAlarm: > 1LI> Signalling Type: FXS Kewlstart > Radio: 0*CLI> Owner: <None> Real: > <None>> Callwait: <None> Threeway: > <None> Confno: -1LI> Propagated > Conference: -1 Real in conference: 0 > DSP: no1*CLI> Busy Detection: no TDD: > no1*CLI> Relax DTMF: no > Dialing/CallwaitCAS: 0/0 Default law: > ulaw Fax Handled: no Pulse phone: no > DND: no1*CLI> Echo Cancellation: > trixbox1128 taps trixbox1(unless TDM > bridged) currently OFF Actual > Confinfo: Num/0, Mode/0x0000 Actual > Confmute: No > Hookstate (FXS only): Onhook I have configured a "ZAP Trunk (DAHDI compatibility Mode)" with the ZAP identifier 1 and an outbound route, but when ever I try to make an external call via it I get the "All Circuits are busy now, please try your call again later message". The FXO module is directly connected to our phone line from BT via a BT-RJ11 cable. I'm guessing I've missed a configuration step somewhere but no idea where, any help greatly appreciated.

  Read the article

• Trying to install pdo_oci via PECL fails asking for PDO extension

  - by Igoru

  I'm using Linux Mint 11 (based on Ubuntu 11.04) and I need to use PHP with Oracle through PDO, a requirement of the framework we will work with. I've installed various PDO extensions using the normal apt-get method, like php5-mysql, etc, and they loaded just fine, along with the initial PDO extension. But there's no package for Oracle bindings. So, when I try to run sudo pecl install pdo_oci it throws me this: WARNING: "pear/PDO_OCI" is deprecated in favor of "channel://http://www.php.net/pdo_oci/ext/pdo_oci" pear/PDO_OCI requires PHP extension "pdo" (version >= 1.0) No valid packages found install failed How can I add this channel, or is there a better way to install the PDO_OCI extension?

  Read the article

• Unable to connect to Github for the first time

  - by MaxMackie

  This is my first time with Git and I'm trying to set it up on my box. I added my key to my profile in the Github web interface. When I try to connect... : max@linux-vwzy:~> ssh [email protected] The authenticity of host 'github.com (207.97.227.239)' can't be established. RSA key fingerprint is xx Are you sure you want to continue connecting (yes/no)? yes Warning: Permanently added 'github.com,207.97.227.239' (RSA) to the list of known hosts. PTY allocation request failed on channel 0 max@linux-vwzy:~> ssh-add ~/.ssh/id_rsa Identity added: /home/max/.ssh/id_rsa (/home/max/.ssh/id_rsa) max@linux-vwzy:~> ssh [email protected] PTY allocation request failed on channel 0 I'm supposed to be getting some kind of welcome message however, I'm not.

  Read the article

• Ping only works after about 30 seconds

  - by Ricardo Polo

  Today I am working on this issue and I would love your ideas. There is a network with something like this LAN 1 -- WAN CHANNEL--- LAN 2 The LAN 1 have two segments. When I make a ping from LAN 1 segment 1 it works like a charm. When I make a ping from LAN 1 segment 2 I have no ping, but after about 30 seconds of continues ping (ping -t) it start to work perfect. After some time of no activity with the destination host the issue happens again. Tracing the route packets stops in the last router before the target. This is the first router in LAN 2 after the WAN channel. In the next screenshot you can see thie issue, the first ping is before a continuos ping and the second one is while continous ping is running. Thank you in advance

  Read the article

• Trailing dots in url result in empty 404 page on IIS

  - by Peter Hahndorf

  I have an ASP.NET site on IIS8, but IIS7.5 behaves exactly the same. When I enter a URL like: mysite.com/foo/bar.. I get the following error with a '500 Internal Server Error' status code: even though I have custom error pages set up for 500 and 404 and I don't see anything wrong with my custom error page. In my web.config system.web node I have the following: <customErrors mode="On"> <error statusCode="404" redirect="/404.aspx" /> </customErrors> If I remove that section, I get a 404.0 response back but the page itself is blank. In web.config system.webServer I have: <httpErrors errorMode="DetailedLocalOnly"> <remove statusCode="404" subStatusCode="-1" /> <error statusCode="404" prefixLanguageFilePath="" path="404.html" responseMode="File" /> </httpErrors> But whether that is there or not, I get the same blank 404.0 page rather than my expected custom error page, or at least an internal IIS message. So first of all why is the asp.net handler picking up a request for '..' (also works with one or more trailing dots) If I remove the following handler from applicacationHost.config: <add name="ExtensionlessUrlHandler-Integrated-4.0" path="*." verb="GET,HEAD,POST,DEBUG" type="System.Web.Handlers.TransferRequestHandler" preCondition="integratedMode,runtimeVersionv4.0" responseBufferLimit="0" /> I get my expected custom 404 page, but of course removing that handler breaks routing in asp.net among other things. Looking at the failure trace I see: Windows Authentication is disabled for the site, so why is that module even in the request pipeline? For now my fix is to use the URL Rewrite module with the following rule: <rewrite> <rules> <rule name="Trailing Dots" stopProcessing="true"> <match url="\.+$" /> <action type="Rewrite" url="/404.html" appendQueryString="false" /> </rule> </rules> </rewrite> This works okay, but I wonder why IIS/ASP.NET behaves this way?

  Read the article

• SSH closing by itself - root works fine

  - by Antti

  I'm trying to connect to a server but if i use any other user than root the connection closes itself after a successful login: XXXXXXX:~ user$ ssh -v [email protected] OpenSSH_5.2p1, OpenSSL 0.9.8l 5 Nov 2009 debug1: Reading configuration data /etc/ssh_config debug1: Connecting to XXXXXXX.XXXXXX.XXX [xxx.xxx.xxx.xxx] port 22. debug1: Connection established. debug1: identity file /Users/user/.ssh/identity type -1 debug1: identity file /Users/user/.ssh/id_rsa type -1 debug1: identity file /Users/user/.ssh/id_dsa type 2 debug1: Remote protocol version 2.0, remote software version OpenSSH_4.3 debug1: match: OpenSSH_4.3 pat OpenSSH_4* debug1: Enabling compatibility mode for protocol 2.0 debug1: Local version string SSH-2.0-OpenSSH_5.2 debug1: SSH2_MSG_KEXINIT sent debug1: SSH2_MSG_KEXINIT received debug1: kex: server->client aes128-ctr hmac-md5 none debug1: kex: client->server aes128-ctr hmac-md5 none debug1: SSH2_MSG_KEX_DH_GEX_REQUEST(1024<1024<8192) sent debug1: expecting SSH2_MSG_KEX_DH_GEX_GROUP debug1: SSH2_MSG_KEX_DH_GEX_INIT sent debug1: expecting SSH2_MSG_KEX_DH_GEX_REPLY debug1: Host 'XXXXXXX.XXXXXX.XXX' is known and matches the RSA host key. debug1: Found key in /Users/user/.ssh/known_hosts:12 debug1: ssh_rsa_verify: signature correct debug1: SSH2_MSG_NEWKEYS sent debug1: expecting SSH2_MSG_NEWKEYS debug1: SSH2_MSG_NEWKEYS received debug1: SSH2_MSG_SERVICE_REQUEST sent debug1: SSH2_MSG_SERVICE_ACCEPT received debug1: Authentications that can continue: publickey,gssapi-with-mic,password debug1: Next authentication method: publickey debug1: Offering public key: /Users/user/.ssh/woo_openssh debug1: Authentications that can continue: publickey,gssapi-with-mic,password debug1: Offering public key: /Users/user/.ssh/sidlee.dsa debug1: Authentications that can continue: publickey,gssapi-with-mic,password debug1: Trying private key: /Users/user/.ssh/identity debug1: Trying private key: /Users/user/.ssh/id_rsa debug1: Offering public key: /Users/user/.ssh/id_dsa debug1: Authentications that can continue: publickey,gssapi-with-mic,password debug1: Next authentication method: password [email protected]'s password: debug1: Authentication succeeded (password). debug1: channel 0: new [client-session] debug1: Entering interactive session. Last login: Mon Mar 29 01:41:51 2010 from 193.67.179.2 debug1: client_input_channel_req: channel 0 rtype exit-status reply 0 debug1: channel 0: free: client-session, nchannels 1 Connection to XXXXXXX.XXXXXX.XXX closed. Transferred: sent 2976, received 2136 bytes, in 0.5 seconds Bytes per second: sent 5892.2, received 4229.1 debug1: Exit status 1 If i log in as root the exact same way it works as expected. I've added the users i want to log in with to a group (sshusers) and added that group to /etc/sshd_config: AllowGroups sshusers I'm not sure what to try next as i don't get a clear error anywhere. I would like to enable specific accounts to log in so that i can disable root. This is a GridServer/Media Temple (CentOS).

  Read the article

• window services works after local account used before this account

  - by Gauls

  Hi All of a sudden my window services app after installation does not start(Some services stop automatically if they have no work to do) uses custom user, if i change the logon setting to use local system account and click start works fine, then when i go back and change to use this account (local user- custom user under user group) and then click start it works fine, why didn't work in the first place???????????? Thanks

  Read the article

• Disabling the Squid Error pages

  - by Nicholas Smith

  I've just started looking at using Squid for a project and can't seem to see an easy way of disabling the Squid error pages (e.g. "Name Error: The domain name does not exist"). We use a custom browser which handles that scenario in our way, so the Squid error pages are overriding our custom logic. Is it possible to set them too 'off'? I've been through the .conf and I've found where the error pages are stored, but no real options to disable them.

  Read the article

• unknown codec 0x0064 (G726 ADPCM)

  - by Colin Pickard

  I've got a number of audio recordings which I can't play back. It appears to be a case of a missing codec, but I can't locate the codec in question. VLC will not play the files. ffmpeg gives the error Unsupported codec (id=0) for input stream 0. This is the output from MediaInfo. General CompleteName : Format : Wave FileSize/String : 164 KiB Duration/String : 1mn 24s OverallBitRate/String : 16.0 Kbps Audio Format : ADPCM CodecID : 64 CodecID/Info : G.726 CodecID/Hint : APICOM Duration/String : 1mn 24s BitRate_Mode/String : Constant BitRate/String : 16.0 Kbps Channel(s)/String : 1 channel SamplingRate/String : 8 000 Hz BitDepth/String : 2 bits StreamSize/String : 164 KiB (100%) Can anyone help?

  Read the article

• Implement DNS filtering

  - by Michele

  I was wondering what would be the best way to implement DNS filterting. The scenario is this: we need to setup two custom DNS servers to use on our company's computers so that we can filter DNS requests for certain domains and return custom IPs and forward other requests to our ISPs DNS servers. We were thinking about using either PowerDNS or MyDNS because they support MySQL out of the box and we need to change the list of domains to filter quite often. Thanks a lot for your help! :)

  Read the article

• Mac OS X 10.6 clients cannot see ._resource fork files on a CIFS network share

  - by Lachlan

  We have a Windows server, with Mac OS X 10.5 and 10.6 clients. On the server are some Automator workflows with custom icons stored in external resoruce fork files, like this: foo.wflow ._foo.wflow The custom icons are only visible to the 10.5 clients.

  Read the article

• Using MythTV to Stream Satellite Signal to multiple users

  - by Ammar

  I'm planning on setting up a small media center to achieve the following: I have multiple users who want to watch satellite channels I want them to be able to change the channel remotely I'm going to buy an external DVB to capture the signal Use some software to stream the channel that is selected I want to have 2 different channels at the same time, I assume I will need two DVB cards Users use VLC or Windows Media Player or whatever to view the channels How can I achieve this? I heard MythTV can do it? I tried to do some research I couldn't find enough information. Note: There's no copyright issue here. I'm streaming Free-To-Air (FTA) channels.

  Read the article

• iPhone jail break implementation

  - by Marcus

  I've read to jailbreak your iPhone, you download custom firmware to your iPhone. Is this "firmware" a full operating system? Are you replacing the OS that Apple included on the phone with a custom version that doesn't have some of Apple's restrictions?

  Read the article

• What Boxee apps do you recommend?

  - by Tim S. Van Haren

  I've recently repurposed an old machine that I had laying around (custom built several years ago with miscellaneous parts) as a simple media center with an Ubuntu 8.10 operating system and Boxee as its front end, and I absolutely love it. I'm particularly intrigued by the custom applications that are possible, and I wanted to start a running list of recommended apps for it. So, my question is this: what Boxee apps do you recommend, and why? One app per answer, please.

  Read the article

• Convert a gray PNG with alpha to a 1-bit black rectanble with 8-bit alpha

  - by jcayzac

  I use a tool to render LaTeX equations as PNG. The resulting images are in RGBA8888 format. I would like to extract the luminance (grayscale from RGB channels, multiplied by the A channel) as my new alpha channel, set the picture fully black, and save the result in Gray1Alpha8 (G1A8) format. So far I've only managed to get G1A4 or G8A8 but not G1A8. Also, the resulting picture looks like it's not multiplied correctly… convert original.png \ \( -clone 0 -alpha extract \) \ \( -clone 0 -clone 1 -compose multiply -composite \) \ -delete 0 +swap -alpha off -compose copy_opacity -composite -colorspace Gray -depth 4 result.png What am I missing?

  Read the article

• Windows remote administration suite that doesn't rely on Active Directory, Domains, etc

  - by glasnt

  I know there are a number of suites out there that allow Windows machines on a Domain, or in Active Directory to be remotely administrated (windows updates, program installs, maintenance, etc); but does there exist a package that does this for non-AD/Domain setups? The kind of things I'm looking for: manage windows updates, + automatic applying custom package pushing (custom scripts, etc) general maintenance, visibily of health works for 2003/2008/2008R2 works without Active Directory or being part of a Domain (Might be able to manage putting all the machines on a Workgroup, if that helps)

  Read the article

• Fields and Properties in Microsoft Word 2007

  - by O_O

  I have added some advanced properties into my Microsoft Word 2007 document. These were created by doing the following: Click the Office button - Prepare - Properties. Under the Document Properties drop-down menu, select Advanced Properties. In the Custom tab, add properties as needed. My question is how do you insert these custom properties into the Word document so that they are in text form and gets updated when you update the properties in that one spot? Thank you!

  Read the article

• How can I export search folders in Outlook 2010?

  - by Martin

  In Outlook it is possible to export rules. Is it also possible to export custom search folders? I am trying to export the custom search folders I have defined in Outlook 2010 (the logic, not the contents). I have tried: right clicking the search folders and looking into the available menus going into the outlook Import/Export menu, but I can only export real folders to .pst etc. looked into the rules menu

  Read the article

• mumble: how do I send people to AFK after X minutes of not doing anything?

  - by Dan

  How can I set up my Mumble server to automatically send people to the AFK channel after they have been inactive for X minutes?

  Read the article

• Problems when trying to connect to a router wirelessly

  - by Ruud Lenders

  The situation - At my girlfriend's parents' place there are six Windows 7 devices that are wired or wireless connected to a router: 3 dekstops and 3 laptops. There are also several smartphones using the router. The router is secured with WPA2 (AES). The problem - We never had any problems with the router for over a year. But recently - about 3 weeks ago - my girlfriend's laptop (HP) and my laptop (ASUS) started to develop problems while trying to connect to the router. The router has stopped showing up from the network list. Sometimes it comes back and shows up, but then it keeps saying something along the lines of "Could not connect", and not long after that it dissapears again. The range of the router is not the problem here, because we experience the same when we sit next to the router. Sometimes, if we are lucky, and waited a long time (10-15 minutes) without using the laptop for anything, the laptop will eventually succesful connect to the router. The attempts - Of course, the Window 7 troubleshooter. We tried troubleshooting the connection problems and the wireless network adapter, but no luck. We also reset the router enough times to know that's not helping either. Here's the full list of things we tried, but did not help: Running the Windows 7 troubleshooter Resetting the router (more than once) Setting the router settings to factory defaults Disconnecting all other devices except one laptop Applying a system restore Trying static/dynamic IP/DNS - Dynamic is better, right? Enabling/disabling IPv6 - Should I keep IPv6 disabled? Running the command: netsh wlan stop hostednetwork Running the command: netsh wlan set hostednetwork mode=disallow Updating/reïnstalling wireless adapter drivers The tests - To help finding the core of the problem, we tested the following: Plugging an ethernet cable in the router and in our laptops - worked fine Connecting someone else's laptop to the router (wireless) - worked fine Connecting our laptops to someone else's router - worked fine The router - This information might be relevant: Router model: Sitecom 300N Wireless Router Router hardware: version 01 The DCHP Server's IPs range from 192.168.0.100 to 192.168.0.200. Router settings: Wireless channel: 12 Channel bandwidth: 20/40 MHz Extension channel: 8 Preamble type: Long 802.11g protection: Disabled UPnP: Enabled The laptops - If you are wondering about our laptops: My laptop model: ASUS Pro64JQ Girlfriend's laptop: HP Pavillion G6 OS: Both Windows 7 Professional x64 - with Service Pack 1 My wireless adapter: Atheros AR9285 AdHoc 11n: Enabled The question - Does anyone have experienced the same problems as I do? Or does someone know how to solve this? Are there more tricks I can try, or settings I should change? Note - Our laptops are not slow or old. My laptop is 1.5 years old, and the other laptop is just 5 months old. I know how to keep laptops clean and I'm pretty sure both laptops are not bloated with useless software.

  Read the article

• Router's ssid changes from infrastructure to ad-hoc

  - by waldo

  For a period of time the router's ssid is shown (on various computers) as a normal infrastructure network - computers connect fine and everything works however after a few minutes / hours all computers see the same ssid as an ad-hoc network (not infrastructure). At this point a computer that was already connected continues to work - a computer that isn't cannot connect. Rebooting the router temporarily restores the visibility of the correct infrastructure ssid. Is something interfering? Connecting computers: macbook (2009), iphone 3g, windows vista desktop, windows xp desktop. Details: - D-Link DSL-2740B router set to WPA2-PSK (Personal) - Enable Wireless : Yes - Wireless Network Name (SSID) : ###### - Country : Australia - Wireless Channel : 1 - 802.11 Mode : Mixed 802.11n, 802.11g and 802.11b - Channel Width : Auto 20/40 MHz - Transmission Rate : Best (automatic) - Hide Wireless Network : No - Group Key Update Interval : 0 (seconds)

  Read the article

• How do I disable nginx sending messages to syslog?

  - by altman

  My nginx sends lots of messages to syslog, but I don't need them. In my nginx.conf: error_log /var/log/nginx-error.log notice; ...... server { access_log off; location / { .... } } but, in my /var/log/message you see Nov 22 23:25:09 cache3 nginx: 2011/11/22 23:25:09 [error] 3437#0: *32172530 kevent() reported about an closed connection (60: Operation timed out) while reading response header from upstream, client: , server: , request: "GET http://www.igoido012.com//vk HTTP/1.1", upstream: "http:////vk", host: "www.igoido012.com", referrer: "http://www.baidu.com/" Nov 22 23:25:09 cache3 nginx: 2011/11/22 23:25:09 [error] 3437#0: *32099531 upstream timed out (60: Operation timed out) while reading response header from upstream, client: , server: , request: "GET http://t.web2.qq.com/channel/poll?msg_id=0&clientid=431509&t=1321975433305 HTTP/1.1", upstream: "http://:80/channel/poll?msg_id=0&clientid=431509&t=1321975433305", host: "t.web2.qq.com", referrer: "http://t.web2.qq.com/proxy.html?v=20110331001" How can I prevent nginx sending messages to my syslog?

  Read the article

• how does openvpn decide which interface to get IP addrs from

  - by bkrupa

  Using ubuntu 10.04 on both ends. We have a client and server machine on the SAME network attempting to make a vpn connection. We use the config files from here and made minimal changes. The server and client start and seem to connect without any trouble. The server looks like: Wed Feb 23 22:13:22 2011 MULTI: multi_create_instance called Wed Feb 23 22:13:22 2011 192.168.1.55:47166 Re-using SSL/TLS context Wed Feb 23 22:13:22 2011 192.168.1.55:47166 LZO compression initialized Wed Feb 23 22:13:22 2011 192.168.1.55:47166 Control Channel MTU parms [ L:1574 D:138 EF:38 EB:0 ET:0 EL:0 ] Wed Feb 23 22:13:22 2011 192.168.1.55:47166 Data Channel MTU parms [ L:1574 D:1450 EF:42 EB:135 ET:32 EL:0 AF:3/1 ] Wed Feb 23 22:13:22 2011 192.168.1.55:47166 Local Options hash (VER=V4): 'f7df56b8' Wed Feb 23 22:13:22 2011 192.168.1.55:47166 Expected Remote Options hash (VER=V4): 'd79ca330' Wed Feb 23 22:13:22 2011 192.168.1.55:47166 TLS: Initial packet from 192.168.1.55:47166, sid=69112e42 5458135b *...* Wed Feb 23 22:13:22 2011 192.168.1.55:47166 Control Channel: TLSv1, cipher TLSv1/SSLv3 DHE-RSA-AES256-SHA, 1024 bit RSA Wed Feb 23 22:13:22 2011 192.168.1.55:47166 [client1] Peer Connection Initiated with 192.168.1.55:47166 On the client side the connection looks like: Wed Feb 23 22:20:07 2011 [server] Peer Connection Initiated with [AF_INET]192.168.1.41:1194 Wed Feb 23 22:20:10 2011 SENT CONTROL [server]: 'PUSH_REQUEST' (status=1) Wed Feb 23 22:20:10 2011 PUSH: Received control message: 'PUSH_REPLY,route-gateway 10.8.0.4,ping 10,ping-restart 120,ifconfig 10.8.0.50 255.255.255.0' ... Wed Feb 23 22:20:10 2011 /sbin/ifconfig tap0 10.8.0.50 netmask 255.255.255.0 mtu 1500 broadcast 10.8.0.255 Wed Feb 23 22:20:10 2011 Initialization Sequence Completed The openvpn server has been configured to assign ip addresses in the range 10.8.0.* and the client has been given 10.8.0.50. When I run the following nmap from the client: Starting Nmap 5.00 ( http://nmap.org ) at 2011-02-23 22:04 EST Host 10.8.0.50 is up (0.00047s latency). Nmap done: 256 IP addresses (1 host up) scanned in 30.34 seconds Host 192.168.1.1 is up (0.0025s latency). Host 192.168.1.18 is up (0.074s latency). Host 192.168.1.41 is up (0.0024s latency). Host 192.168.1.55 is up (0.00018s latency). Nmap done: 256 IP addresses (4 hosts up) scanned in 6.33 seconds If I run an nmap from the server on 10.8.0.* I get nothing. If the client has two interfaces (wireless and tap device) when you look for a certain ip address, how does it decide which interface to connect on?

  Read the article

< Previous Page | 201 202 203 204 205 206 207 208 209 210 211 212  | Next Page >