Search Results

Search found 10269 results on 411 pages for 'video sitemap'.

Page 205/411 | < Previous Page | 201 202 203 204 205 206 207 208 209 210 211 212  | Next Page >

• Are there any 17-20 inch monitors that support displayport?

  - by WildJoe

  I've got dual monitors now (both 20 inch 1600x1200). After seeing the new eyefinity cards out there (and reading the CodingHorror post on three monitors) I've decided to get a third. It's time to upgrade my video card anyway. Since I don't already have a third monitor and will be buying one new, I figure it'd make sense to buy one that already had a DisplayPort interface so as to avoid the adapter issue. However, I can't seem to find any monitors on newegg that support this (it's not even an option in the power search, and a keyword search turned up only adapters and video cards). A quick google showed me several 30 inchers (like Dell's, but that's way too expensive, and I don't have that much room on my desk even if I had that money) and some 22 inch models. Again, I'm looking for a 17-20 inch with a DisplayPort interface built in. Any suggestions?

  Read the article

• flash h264 mp4 playback pixelation

  - by ndmweb

  Working with converting/playing h264 mp4 videos in flash. I'm converting the video from various source file formats (mostly .mov & .mp4), to h264 mp4 using ffmpeg server side. All seems to be working just fine, except I'm getting a few reports of pixelation of the video when being viewed on windows machines. I've testing just about every browser I can think of on (XP/Vista/7) and could not reproduce. Here's a screenshot: http://i.imgur.com/IK5RV.jpg (sorry for the resolution, was in an email from the client, as I'm unable to reproduce.) Anyone else ever run into this issue? At this point it could be anything in my mind. It seems like an odd bug, and probably a codec issue, or somehow a 32/64-bit issue?

  Read the article

• How to multiplex subtitles with avi or mp4 in Linux?

  - by woofeR

  I have been searching something which can multiplex subtitle with video files in Linux environment. The key thing is that it should softly embed the subtitle to video, not encode again. (like avidemux). After this multiplexing process, user should be able to open/close subtitle using VLC for example. While searching that, I found a software which can do exactly what I need, named AVI-Mux GUI in Windows environment. However, I need these software's Linux alternative. Thanks.

  Read the article

• Bsplayer - load audio tracks from external files

  - by torran

  I have a movie file: Video ID : 1 Format : AVC Format/Info : Advanced Video Codec Format profile : [email protected] Format settings, CABAC : Yes Format settings, ReFrames : 5 frames Muxing mode : Container [email protected] Codec ID : V_MPEG4/ISO/AVC Duration : 54mn 13s Bit rate : 3 380 Kbps Nominal bit rate : 3 459 Kbps Width : 1 280 pixels Height : 720 pixels Display aspect ratio : 16:9 Frame rate : 23.976 fps Resolution : 8 bits Colorimetry : 4:2:0 Scan type : Progressive Bits/(Pixel*Frame) : 0.153 Stream size : 1.28 GiB (88%) Writing library : x264 core 88 r1471 1144615 Audio ID : 2 Format : AC-3 Format/Info : Audio Coding 3 Codec ID : A_AC3 Duration : 54mn 16s Bit rate mode : Constant Bit rate : 384 Kbps Channel(s) : 6 channels Channel positions : Front: L C R, Side: L R, LFE Sampling rate : 48.0 KHz Stream size : 149 MiB (10%) and additional audio files in same folder: .mp3 and .ac3. How can I load them with bsplayer? Right click-audio-audio streams is empty. If i open the movie with media players classic I can switch audio files.

  Read the article

• Low FPS in some games, but hardware not fully used

  - by Mario De Schaepmeester

  I just did a little funny experiment in the game/sim "Train Simulator 2013". I normally have good FPS in it (around 30) at full settings. What I did was make a really, really long train so that the calculations the sim needed to make were enormous (the sim is quite realistic, it takes all things into account like speed/acceleration, G-forces, comfort levels, possible wheel slip and many more, and most of those things on each carriage seperately). This resulted in only 14FPS as reported by the game, but it felt more like 8FPS or so. I have a Logitech G15 keyboard which has an LCD, and it allows me to monitor CPU/RAM and video card load on it. The strange thing is, all CPU cores were busy, but the total load was only about 60% maximum at all times. The video card was only on 30% load (possibly an important note, the memory was full, which is however not unusual for the game in question). The RAM had plenty of room and there weren't many operations as it didn't grow or shrink much. I just have the feeling that the game would run smoother if it used more of my hardware power. Why is it not doing so? I had the same in another game, The Elder Scrolls: Morrowind when using more than 100 mods (that all use scripting) and a few high res texture mods, + a full-on graphics improvement program. The engine is very old (2003), and so I thought this might be the cause (not being optimised for multithreading). I had thought of possible causes, like: The operating system doesn't let the games use all the resources. It doesn't make use of multi-threading appropriately. To eliminate the former, I tried a CPU stress tool and that got 100% CPU juice as I let it run, so the OS is not the problem. I gave its thread the "higher" priority though. My actual question In both games, I did things the engine was not really built to do or support. Can those games' framerate be limited cause of their own engine not being able to cope? What is the real reason and more importantly, can I help it? And in any case, could something actually be wrong with my hardware? It's all reasonably new, a couple of months, and I (almost) never experience any other trouble. Modern and much more demanding games work absolutely fine. Specs CPU: AMD Phenom II 965 X4 @ 3.4gHz RAM: 8GB of DDR3 RAM Video: MSI GTX560 (nVidia chip) with 1GB of GDDR5 memory OS: Windows 7 Ultimate 64 bit Nothing overclocked.

  Read the article

• Can a motherboard be faulty even if it's getting power and so are components hooked up to it?

  - by Davy8

  Sort of a followup to this question. The mobo's getting power, the lights are on. The GPU fan is spinning (it doesn't use auxiliary power, it's only connected to the mobo). I'm not getting any video signal, and it's not the video card (nor monitor) that's faulty, so I'm suspecting mobo or CPU (possibly RAM?) and I'm trying to pinpoint which part is at fault. Is the motherboard a candidate for being broken or is it not very likely if it's getting power and powering other components? The CPU fan is getting power as well.

  Read the article

• Full computer freeze with audio stuttering after playing games for a period of time

  - by Wes

  I've been having a problem with my computer freezing completely when playing games like LA Noire or SW:TOR (yay early access!). Basically, what happens is I will play for around an hour or so (depending on the game) and when the freeze happens, the entire computer locks up and any audio that was being played glitches out and stutters broken-record style (only much shorter. Very techno). I think it might be heat related and thought it might be my video card overheating, so I have been setting my video card (Nvidia Geforce 260GTX 216-core) fan to highest setting, but that has little to no effect. Now I'm beginning to think it's either my FSB or CPU overheating. Can anyone provide some insight or similar experiences? I'm really at a loss and don't wanna damage my rig beyond repair.

  Read the article

• Share Only 1 folder using SMB

  - by SnippetSpace

  I want to share my "My Videos" folder using Windows's built in SMB. The problem is that when I decide to share my video folder and check it on another device, the path always is: networkname>username>my videos instead of just my videos I noticed that indeed sharing gets turned on from the user folder down to the video folder instead of just on the folder I selected. So now my question is why this is happening; And how cold I just display my "my Videos" folder on my remote device and not the entire path? BTW device in question is a hacked Apple TV. thank you for your help! Christopher

  Read the article

• Can a processor upgrade cause BSOD?

  - by Daniel

  I Had the following hardware setup: Phenom II X4 945 Asus M4A97 4GB DDR2 OCZ Radeon HD5850 OCZ Agility 2 120 GB Windows 7 x64 Pro Fully updated (latest drivers and windows update patches) Then I bought an used Phenom II X6 1090T and installed it without formatting. Since that my computer started BSODing almost every time I'm playing any game and with different error messages, like: page fault in non-paged area bad pool header the video memory manager found a problem error in dxgmm1.sys(or something like that) And when it doesn't BSOD the game simply crashes. I have tried: Updating BIOS Reseting BIOS to defaults Reinstalling Video Drivers Installing the latest DirectX All that's left is to do a full format and I don't want to do that since it's going to be a lot of work to fine tune windows to my preferences again. So is my "new" processor defective or do I really need to format the computer? Update: I use a (properly installed) custom cooler from Coolermaster and both the BIOS and the Open Hardware Monitor(Application) attest the CPU is not overheating, so I guess the CPU its defective and since I bought it from a guy over the Internet I'm probably screwed

  Read the article

• Error 5A - Internal CPU Error

  - by Mitch

  So I built myself a pc for the first time. The machine has been running properly, and without issue, since March of this year. Today after an hour or so of gaming the machine shutdown without warning. Any attempts to reboot have been unsuccessful. I have managed to get it to post, twice, but it doesn't get as far as the OS before it shuts off again. I pulled the second video card so I could see the error code LED and it appears to be showing 5A which matches to "Internal CPU Error". Am I looking at a failed CPU or is this a symptom of another issue? Any feedback you can provide is most appreciated. Here's my parts list: CPU: Intel Core i7-4930K 3.4GHz 6-Core CPU Cooler: Corsair H105 73.0 CFM Liquid Motherboard: Asus X79 Deluxe ATX LGA2011 Ram: G.Skill Ripjaws X Series 32GB (4 x 8GB) DDR3-1600 Video card (x2): EVGA GeForce GTX 770 2GB Power supply: Corsair 1000W ATX12V / EPS12V

  Read the article

• Tell the linux kernel to put a file in the disk cache?

  - by Rory

  Is there any command to for a file to be read in and loaded into the linux disk cache? This is on an up-to-date debian system. I know in the general case, it's better to let the linux kernel figure this out. But I have an edge case. I have a laptop that has an NFS director mounted, and i want to play a long video file, but I don't want to have a network problem interrupt the playnig. I know that (largeish) file will be read in it's entirety later on. I know that nothing else (really) will be running while playing this video. There is enough free memory to store this file. (I know I could just copy the file into a new tmpfs filesystem, but I'm curious if there's an even shorter way to do it)

  Read the article

• What happened to QuickTime Pro for Windows editing features?

  - by Tod

  I used to record screencasts in SnagIt and then edit them in QuickTime Pro on windows with no problem. I haven't done it in a few months and now when I try most of the editing features have gone whack-a-doodle. For instance, if I got to delete a few seconds of video, it actually ends up deleting 20 seconds of video. I have repeated this on various source files including the Sample.mov that comes with QT. Using Edit-Cut looks like it works, but it doesn't actually do anything. Trim still works but that appears to be it. I know at least one other person has confirmed this behaviour. Does anyone have any work arounds. I'm using Windows 7 64 bit. QT Info QT Pro 7.7.1 (1680.42) QuickTime Version 7.6.8 (1675)

  Read the article

• Windows 8.1 will not boot after upgrading from Windows 8 on my PC

  - by user266969

  I have not found a fix. After running the Windows 8.1 Update from the store my computer will not boot unless In insert my recovery USB drive and try to repair. (The repair fails.) However after I power of the PC and remove the USB drive. The PC will boot correctly once. I would leave the PC on but it shuts it self off at night. (And yes I have checked my power profile, it is set to never.) The only thing I have found online is a possibly corrupt video driver. I uninstalled the video driver reboot and it did not fix the issue. Anybody have any suggestions? The PC is a HP EliteBook 8730w laptop. I had no issues with Windows 8 or the Windows 8.1 preview.

  Read the article

• Hardware specs for web cache

  - by Raj

  I am looking for recommendations for hardware specs for a server that needs to be a web cache for a user population of about 2,000 concurrent connections. The clients are viewing segmented HTTP video in bitrates ranging from 150kbps to 2mbps. Most video is "live" meaning segments of 2-10 secs each, of which 100 or so are maintained at a time. There are also some pre-recorded fixed length videos. How would I go about doing the provisioning calculation for such a server: What kind of HDD (SSD?), how many NICs how much RAM etc? I am thinking of using Varnish on Linux, all the RAM I can get my hands on, 2 CPUs with 6-8 cores each.

  Read the article

• HDMI resolution limited to 1920 x 1080?

  - by Jay Bazuzi

  Monitor is a Dell 3008wfp. Very nice. Max resolution 2560 x 1600. Video card is an ATI Radeon HD 4350. I like it because it was cheap and is fanless. (Noise bugs me.) I would like to switch from DVI to HDMI, but when I use HDMI, the resolution drops to 1920 x 1080. Do I need to change out my video card to get the full resolution? How can I pick one that will do the max resolution?

  Read the article

• DVI monitor detected only on computer startup

  - by kamil

  I've recently connected a new monitor, LG M2252D-PZ, to a rather outdated computer with Windows XP and Radeon 9600. XP has SP3 installed, video drivers are the latest version back from the times the video card was still supported. My problem is that the monitor works fine only as long as I don't turn it off or switch it to a different input. When I turn it back on, it says "no signal". The key to the problem must be the DVI port, to which the new monitor is connected. The previous monitor was connected to the VGA output, and I've tested that the new one also works fine when connected to the analogue port. Apparently, the computer tests for the presence of a monitor on the DVI port only on startup. The question is, how do I change this?

  Read the article

• Connecting to a 2.5" laptop drive using USB

  - by user27449

  So I swapped my MBP hard drive with a SSD drive, and I want to connect to my old hard drive. I bought a nextstar 3 external 2.5" drive enclosure that has a USB 2.0 interface. I watched an online video of an older version of the enclosure, and in the video they had a ATA cable to connect to the drive. My enclosure didn't come with anything like that, and there doesn't seem to be a way to connect to my drive (my old drive is a seagate 500gb momentus 7200 RPM). My laptop is about 2 years old now (MBP 17"). The drive doesnt' have pins to connect, it has a wide plug type connector, and a USB connector also (I was able to directly plugin the USB cable to the drive, but didn't connect it to my computer, was just testing thigns out). Is it safe for me to directly connect the cable that came with the enclosure to the drive, and then connect the other end to my computer? Does this single cable provide power and data transfer?

  Read the article

• What can cause a black or blank screen when pressing logout or switch user in windows 7

  - by Medran

  The situation I have here is related to a brand new dell machine with a GTX260 video card. Put simply after one user logs in when that user either 'switch users' or 'logs out' windows goes to a black/blank screen. The TV screen that is used with this computer previously functioned fine with fast user switching on an XP machine. The new computer is windows 7. The TV is not outputting any error messages like 'no signal' or anything else that would be displayed if the computer was off. You can fix the problem by cycling the input on television, after cycling the input the welcome screen appears as normal. What I want to know is what on earth is windows doing that would cause the video card to stop sending the same signal to the monitor when the user logs off or switches users. I mean as far as I can tell the resolution is identical between windows and the welcome screen. Or perhaps if somebody has experienced this before a fix would be great too.

  Read the article

• Why can't I right click on flash videos in Chrome? (Ubuntu 9.10)

  - by user242065

  I'm trying to change the "quality" to low of a Hulu video so I can full screen it with out it being choppy but right click does nothing. When I right click in firefox it brings up a menu. I'm running Chrome on Ubuntu 9.10, is any one else having this issue I tried Google and got nothing back. I use chrome as my main browser, I have to switch to firefox every time I watch Hulu videos. Is there another way I cant change the quality of the flash video in Chrome?

  Read the article

• Need to hookup HP dv7-3085dx with NVIDIA GeForce GT 230M to my Dell 30 inch LCD 3007WFP at max resolution

  - by user14660

  I recently bought an HP laptop (dv7-3085dx) which is supposed to have a pretty good video card (NVIDIA GeForce GT 230M). The card is supposed to output a max resolution of 2560x1600 which is also the max resolution of my monitor. I've now bought an HDMI to dual link DVI cable - this is after Best Buy's 70 dollar HDMI to DVI (perhaps it was 'single' link?) didn't give me the best resolution. In Windows 7, when I try to set the max resolution for my 30" monitor, I only get 1280x800, which is absurd. The monitor is great, I love the laptop and the video card supposedly supports such resolutions. I therefore can't figure out why I'm not getting a better resolution. When I "detect" my monitor in Windows 7, it is shown correctly as a DELL 3007WFP!

  Read the article

• Two 24' displayed vertically in Ubuntu

  - by QuinnBaetz

  I just got two 24' inch monitors, and want them to display vertically side by side. I got one to but can't figure out the command to get them both vertical and displaying. xorg.conf: Section "Monitor" Identifier "Configured Monitor" EndSection Section "Screen" Identifier "Default Screen" Monitor "Configured Monitor" Device "Configured Video Device" SubSection "Display" Virtual 3840 1200 EndSubSection EndSection Section "Device" Identifier "Configured Video Device" EndSection xrandr: Screen 0: minimum 320 x 200, current 3840 x 1200, maximum 3840 x 1200 VGA connected 1920x1200+0+0 (normal left inverted right x axis y axis) 519mm x 324mm 1920x1200 60.0*+ 1600x1200 60.0 1280x1024 75.0 60.0 1152x864 75.0 1024x768 75.0 60.0 800x600 75.0 60.3 640x480 75.0 59.9 720x400 70.1 TMDS-1 connected 1920x1200+1920+0 (normal left inverted right x axis y axis) 518mm x 324mm 1920x1200 60.0*+ 1600x1200 60.0 1280x1024 75.0 60.0 1152x864 75.0 1024x768 75.0 60.0 800x600 75.0 60.3 640x480 75.0 59.9 720x400 70.1 any clue on the command to make them vertical? Thanks!

  Read the article

• ffmpeg - join / merge on top of each other

  - by AisIceEyes

  I'm trying to join together two videos on top of each other. I already did these two ffmpeg commands ffmpeg -i 2_Out_of_Control.VOB -aspect 16:9 \ -vf "yadif=0:-1:0,crop=w=714:h=476:x=6:y=0,scale=1280:720,boxblur=lp=13" \ -c:v libx264 -preset medium \ -c:a copy \ '2(blurred)Out_of_Control.mp4' ffmpeg -i 2_Out_of_Control.VOB \ -vf "yadif=0:-1:0,crop=w=714:h=476:x=6:y=0,scale=1080:720" \ -c:v libx264 -preset medium \ -c:a copy \ '2(clear)Out_of_Control.mp4' I'm currently stuck on making the "clear" version on top of the "blurred" version. I'm not sure how to do that. Can anybody help please? Been googling for around 2 days already. Only achieved it by using OpenShot but yeah, would prefer if there is an ffmpeg command to merge the two videos on top of each other. Edit: I want the "clear" video to be at the center at the top of the "blurred" video Edit2: console output would be the same as above: ffmpeg -i 2(blurred)Out_of_Control.mp4 \ -i 2(clear)Out_of_Control.mp4 \ -aspect 16:9 \ -vf <just something that will join the two together: the blurred at the bottom, clear at top that is centered> \ -c:v libx264 -preset medium \ -c:a copy \ '2_Out_of_Control_VOB.mp4' Edit3: here is the output when I used ffmpeg -i 2_Out_of_Control.VOB $ ffmpeg -i 2_Out_of_Control.VOB ffmpeg version git-2013-10-03-c7fe2a3 Copyright (c) 2000-2013 the FFmpeg developers built on Oct 4 2013 05:22:06 with gcc 4.6 (Ubuntu/Linaro 4.6.3-1ubuntu5) configuration: --prefix=/home/username/ffmpeg_build --extra-cflags=-I/home/username/ffmpeg_build/include --extra-ldflags=-L/home/username/ffmpeg_build/lib --bindir=/home/username/bin --extra-libs=-ldl --enable-gpl --enable-libass --enable-libfdk-aac --enable-libmp3lame --enable-libopus --enable-libtheora --enable-libvorbis --enable-libvpx --enable-libx264 --enable-nonfree --enable-x11grab libavutil 52. 46.100 / 52. 46.100 libavcodec 55. 34.100 / 55. 34.100 libavformat 55. 19.100 / 55. 19.100 libavdevice 55. 3.100 / 55. 3.100 libavfilter 3. 88.101 / 3. 88.101 libswscale 2. 5.100 / 2. 5.100 libswresample 0. 17.103 / 0. 17.103 libpostproc 52. 3.100 / 52. 3.100 Input #0, mpeg, from '2_Out_of_Control.VOB': Duration: 00:05:00.01, start: 0.500000, bitrate: 4574 kb/s Stream #0:0[0x1e0]: Video: mpeg2video (Main), yuv420p(tv, smpte170m), 720x480 [SAR 8:9 DAR 4:3], max. 9334 kb/s, 29.97 fps, 29.97 tbr, 90k tbn, 59.94 tbc Stream #0:1[0x80]: Audio: ac3, 48000 Hz, stereo, fltp, 384 kb/s At least one output file must be specified $

  Read the article

• Motherboard dual gfx power question

  - by user33931

  1st, I am software guy. I do not do hardware. So I know to you hardware geeks, this is a dumb question. I just inherited a box with a ASUS P5GZ-MX mother board. I have attempted to install two nVidia PCI video cards. I put a 750w power supply in the system to be sure I have enough power. With no extra video cards, the 3.3 v shows normal. When I put one card in, the 3.3 goes to 3.5-3.6 and flashes red (over voltage) about 30% of the time. When I put the 2nd card in, it goes to 3.73 v and stays red all the time. Any Ideas why the voltage goes up when I add cards instead of going down? More Importantly, is this dangerous to the system?

  Read the article

• How to delete a file after vlc finishes playing it?

  - by Codezilla

  I know you can have vlc shut down your pc after you finish playing something but I'm trying to figure out a way to delete the file, preferably with a confirmation dialog box after you finish playing something. Ideally it would only do this if the file was actually played to at least 90% of the file so as not to have unnecessary deletions but that may not be possible. Running a batch file to play the video would work, but it'd have to be something easy to do. Having to edit a batch file with the name of the video to play each time would get old fast. Any ideas?

  Read the article

• Social Media event Bandwidth requirements

  - by Bob G

  I have an one day event in July 2012, hosting 250 attendees for a social media event. We will be uploading live video to a website, allowing the press to access the web, and some vendors will be showing off their web sites for clients and visitors. The staff will need access for uploading files and information as needed. We had the event last year and tried a cable modem brought in with 2x2 megs just for the streaming video which worked well. I had 4 wireless hot spots, rented from a company 1.5 mbps x 780 kbps, which was were a complete failure. I was assured the 4 hot spots would be enough, but they did not work. What would be the proper way to get the bandwidth required to make the one day event successful? The setting is a Private Country Club where running cables everywhere is very tough.

  Read the article

< Previous Page | 201 202 203 204 205 206 207 208 209 210 211 212  | Next Page >