Search Results

Search found 6104 results on 245 pages for 'fast esp'.

Page 206/245 | < Previous Page | 202 203 204 205 206 207 208 209 210 211 212 213  | Next Page >

• ASP .NET page runs slow in production

  - by Brandi

  I have created an ASP .NET page that works flawlessly and quickly from Visual Studio. It does a very large database read from a database on our network to load a gridview inside of an update panel. It displays progress in an Ajax modalpopupextender. Of course I don't expect it to be instant what with the large db reads, but it takes on the order of seconds, not on the order of minutes. This is all working great until I put it up on the server - it is very, VERY slow when I access it via the internet - takes several minutes to load the database information into the gridview. I'm baffled why it would not perform the exact same as it had from Visual Studio. (It is in release mode and I have taken off the debug flag) I have since been trying things like eliminating unneeded update panels and throwing out the ajax tool. Nothing has made it any faster on production. It is not the database as far as I know, since it has been consistently fast from my computer (from visual studio) and consistently slow from the server. I am wondering, where do I look next? Has anyone else had this problem before? Could this be caused by update panels or Ajax modalpopupextenders in different parts of the application? Why would the live behaviour differ so much from the localhost behaviour? Both the server with the ASP .NET page and the server with the database are servers on our network. I'm using Visual Studio 2008. Thank you in advance for any insight or advice.

  Read the article

• How accurately (in terms of time) does Windows play audio?

  - by MusiGenesis

  Let's say I play a stereo WAV file with 317,520,000 samples, which is theoretically 1 hour long. Assuming no interruptions of the playback, will the file finish playing in exactly one hour, or is there some occasional tiny variation in the playback speed such that it would be slightly more or slightly less (by some number of milliseconds) than one hour? I am trying to synchronize animation with audio, and I am using a System.Diagnostics.Stopwatch to keep the frames matching the audio. But if the playback speed of WAV audio in Windows can vary slightly over time, then the audio will drift out of sync with the Stopwatch-driven animation. Which leads to a second question: it appears that a Stopwatch - while highly granular and accurate for short durations - runs slightly fast. On my laptop, a Stopwatch run for exactly 24 hours (as measured by the computer's system time and a real stopwatch) shows an elapsed time of 24 hours plus about 5 seconds (not milliseconds). Is this a known problem with Stopwatch? (A related question would be "am I crazy?", but you can try it for yourself.) Given its usage as a diagnostics tool, I can see where a discrepancy like this would only show up when measuring long durations, for which most people would use something other than a Stopwatch. If I'm really lucky, then both Stopwatch and audio playback are driven by the same underlying mechanism, and thus will stay in sync with each other for days on end. Any chance this is true?

  Read the article

• IIS6, ASP.NET MVC 1 and random slowdowns

  - by Mr Snuffle

  I've recently deployed a MVC application to an IIS6 web server. One strange behaviour I've been having is the load times will randomly blow up to 30sec+ and then return to normal. Our tests have shown this occurring on multiple connections at the same time. Once the wait has passed, the site become responsive again. It's completely random when this will occur, but will probably happen about once every 15 minutes or so. My first thought was the application was being restarted by the web server for some reason, but I determined this wasn't the case because the process recycling is set very infrequently, and I placed some logging in the application startup. It's also nothing to do with the database connection. This slowdown happens simply by moving between static pages too. I've watched the database with a SQL profiler, and nothing is hitting it when these slowdowns occur. Finally, I've placed entry and exit logging on my controller actions, the slowdown always happens outside of the controller. The entry and exit time for a controller action is always appropriately fast. Does anyone have any ideas of what could be causing this? I've tried running it locally on IIS7 and I haven't had the issue. I can only think it's something to do with our hosting provider.

  Read the article

• SQL Server 2008 spatial index and CPU utilization with MapGuide Open Source 2.1

  - by Antonio de la Peña

  I have a SQL Server table with hundreds of thousands of geometry type parcels. I have made indexes on them trying different combinations of density and objects per cell settings. So far I'm settiling for LOW, LOW, MEDIUM, MEDIUM and 16 objects per cell and I made a SP that sets the bounding box according to the extents of the entities in the table. There is an incredible performance boost from queries taking almost minutes without index to less than seconds, it gets faster when the zoom is closer thus less objects are displayed. Yet the CPU utilization gets to 100% when querying for features, even when the queries themselves are fast. I'm worrying this will not fly in a production environment. I am using MapGuide Open Source 2.1 for this project, but I am positive the CPU load is caused by SQL Server. I wonder if my indexes are set properly. I haven't found any clear documentation on how to properly set them up. Every article I've read basically says "it depends..." but nothing specific. Do you have any recommendations for me, including books, articles? Thank you.

  Read the article

• What database systems should an startup company consider?

  - by Am

  Right now I'm developing the prototype of a web application that aggregates large number of text entries from a large number of users. This data must be frequently displayed back and often updated. At the moment I store the content inside a MySQL database and use NHibernate ORM layer to interact with the DB. I've got a table defined for users, roles, submissions, tags, notifications and etc. I like this solution because it works well and my code looks nice and sane, but I'm also worried about how MySQL will perform once the size of our database reaches a significant number. I feel that it may struggle performing join operations fast enough. This has made me think about non-relational database system such as MongoDB, CouchDB, Cassandra or Hadoop. Unfortunately I have no experience with either. I've read some good reviews on MongoDB and it looks interesting. I'm happy to spend the time and learn if one turns out to be the way to go. I'd much appreciate any one offering points or issues to consider when going with none relational dbms?

  Read the article

• How do I install websocket module for Node.js on Debian VPS?

  - by Ollie Shaw

  I currently am renting a VPS from Dreamhost which runs Debian. I am still learning command line on this OS, but fast! I have successfully installed Node.js, now I want to install the websocket module found here: https://github.com/Worlize/WebSocket-Node From the root user, I have run the following command: npm install websocket The error thrown is: [websocket v1.0.7] Native code compile failed!! On Windows, native extensions require Visual Studio and Python. On Unix, native extensions require Python, make and a C++ compiler. Start npm with --websocket:verbose to show compilation output (if any). What commands should I issue to install this websocket module and its requirements? Thanks very much! Edit: When I run sudo apt-get install gcc make I get this message: Reading package lists... Done Building dependency tree Reading state information... Done gcc is already the newest version. gcc set to manually installed. make is already the newest version. 0 upgraded, 0 newly installed, 0 to remove and 44 not upgraded. And the same error when trying to install WebSocket.

  Read the article

• merging two small pieces of jquery codes

  - by Billa

  Following are two pieces of jquery code. First one prints a text message when clicked on a link, and the second slides down a div when click on a link. I want to merge second code into first one, so that when I click the link, it displays the message (as the first code does), and also slides down the #votebox (as done in second code, and show content in that. I will be very thankful for any help. $("a.vote_up").click(function(){ the_id = $(this).attr('id'); $("span#votes_count"+the_id).fadeOut("fast"); $.ajax({ type: "POST", data: "action=vote_up&id="+$(this).attr("id"), url: "votes.php", success: function(msg) { $("span#votes_up"+the_id).fadeOut(); $("span#votes_up"+the_id).html(msg); $("span#votes_up"+the_id).fadeIn(); //Here, I want to slide down the votebox and content div (from code below). } }); }); The following code slides down votebox div and displays content in it, I want to include that in the above code. $("a.vote_up").click(function(){ var id=$(this).attr("id"); var name=$(this).attr("name"); var dataString = 'id='+ id + '&name='+ name; //I want to include this votebox in above code. $("#votebox").slideDown("slow"); $("#flash").fadeIn("slow"); $.ajax({ type: "POST", url: "rating.php", data: dataString, cache: false, success: function(html){ $("#flash").fadeOut("slow"); //and want to use this div as well. $("#content").html(html); } }); }); Thanks for any help.

  Read the article

• Who likes #regions in Visual Studio?

  - by Nicholas

  Personally I can't stand region tags, but clearly they have wide spread appeal for organizing code, so I want to test the temperature of the water for other MS developer's take on this idea. My personal feeling is that any sort of silly trick to simplify code only acts to encourage terrible coding behavior, like lack of cohesion, unclear intention and poor or incomplete coding standards. One programmer told me that code regions helped encourage coding standards by making it clear where another programmer should put his or her contributions. But, to be blunt, this sounds like a load of horse manure to me. If you have a standard, it is the programmer's job to understand what that standard is... you should't need to define it in every single class file. And, nothing is more annoying than having all of your code collapsed when you open a file. I know that cntrl + M, L will open everything up, but then you have the hideous "hash region definition" open and closing lines to read. They're just irritating. My most stead fast coding philosophy is that all programmer should strive to create clear, concise and cohesive code. Region tags just serve to create noise and redundant intentions. Region tags would be moot in a well thought out and intentioned class. The only place they seem to make sense to me, is in automatically generated code, because you should never have to read that outside of personal curiosity.

  Read the article

• [jquery] multiple resizables acting strange

  - by Noweem

  Hi there everyone, I'm trying to place multiple resizable and draggable div's on one page that move (vertically) inside their own parent div. you can take a look at http://bit.ly/bCutBE However, these div's act really strange when I want to resize them, especially from the north side, they kind of move out of the screen very fast, while they shouldn't be able to get outside the parent div. I only want the div to be able to move and resize vertically inside it's parent, the dragging-part works pretty good, but the resize part give this problem. I can't really describe it better than this, but take a look for yourself and it will be clear immediately when you try to resize one of the coloured div's: move it a little downwards and try to resize it from the north side. the problem seems to be caused by the containment: 'parent', line of the resizable. when I delete this line it works fine, but then the coloured blocks don't stay in their parent, and I want them to stay inside their parent. I hope someone can help me with this... the jquery code I used: $(document).ready(function(){ $(".move") .draggable({ containment: 'parent', grid: [50,50], axis: 'y' }) .resizable({ containment: 'parent', grid: [50,50], handles: 'n, s', minHeight: 50 }); });

  Read the article

• Javascript and rendering pauses and stays paused on scroll in the android browser

  - by user357303

  Hi. I've found some wierd behaviour related to scrolling and rendering and javascript. How to make it happen: On any webpage that is long enough to scroll on. Start to scroll pretty fast (fling the page). then release the touch. No while the page is still scrolling because of the momentum. Tap the screen to stop the scroll. This make the browser enter a wierd mode. On the nexus one it behaves like this: The updating of what's shown on the screen stops, you can still click on links and the go to where they are supposed to but what's shown on the screen stays the same. If you then scroll the screen a bit the update of the screen kicks in again and what you you where suppsed to see all the time is shown. On all phones with HTC Sense I've tried (Hero, Desire, Legend) this happens: The updating of the screen is stopped just like on the nexus one, but also the execution of any javascript is stopped. If you click on a link that takes you to another page however things return to normal again. The way I tested this was I created a page like this: http://pastebin.ca/1881620 The changeColor function simply changed the background color of 'container' to a few different colors. So before the error what happens is that when you click any link the color changes. after the error this happens: Nexus one: when you click on the links nothing happens (except the "orange link selected rounded corner box thing" is shown as if the link is clicked). Then when you scroll abit. You can see the color has changed (and equal amount of times to the number of times I clicked the link). On Sense: The links take me to google.com Has anyone else noticed this problem? Is there anyway to work around it? Thanks.

  Read the article

• php OOP function declarations

  - by kris

  I'm a big fan of OOP in php, but i feel like defining class methods gets disorganized so fast. I have a pretty good background in OOP in C++, and i am pretty comfortable with how it is handled there, and am curious if there are ways to do it similarly in php. To be more specific, here is what i mean. I like how in C++ you can define a class header (myclass.h) and then define the actual details of the functions in the implementation file (myclass.cc). Ive found that this can easily be replicated using interfaces in php, but i havent found a good solution for the following: I like to organize my code in C++ in different files based on how they are accessed, so for example, public methods that can be called outside of the class would be in 1 place, and private methods would be organized somewhere else - this is personal preference. Ive tried to define class methods in php like: private function MyPHPClass::myFunction(){ } when the definition isnt directly inside the class block( { } ), but i havent had any success doing this. Ive been through all of the pages on php.net, but couldnt find anything like this. Im assuming that there is no support for something like this, but thought i would ask anyway. thanks

  Read the article

• Graphing the pitch (frequency) of a sound

  - by Coronatus

  I want to plot the pitch of a sound into a graph. Currently I can plot the amplitude. The graph below is created by the data returned by getUnscaledAmplitude(): AudioInputStream audioInputStream = AudioSystem.getAudioInputStream(new BufferedInputStream(new FileInputStream(file))); byte[] bytes = new byte[(int) (audioInputStream.getFrameLength()) * (audioInputStream.getFormat().getFrameSize())]; audioInputStream.read(bytes); // Get amplitude values for each audio channel in an array. graphData = type.getUnscaledAmplitude(bytes, this); public int[][] getUnscaledAmplitude(byte[] eightBitByteArray, AudioInfo audioInfo) { int[][] toReturn = new int[audioInfo.getNumberOfChannels()][eightBitByteArray.length / (2 * audioInfo. getNumberOfChannels())]; int index = 0; for (int audioByte = 0; audioByte < eightBitByteArray.length;) { for (int channel = 0; channel < audioInfo.getNumberOfChannels(); channel++) { // Do the byte to sample conversion. int low = (int) eightBitByteArray[audioByte]; audioByte++; int high = (int) eightBitByteArray[audioByte]; audioByte++; int sample = (high << 8) + (low & 0x00ff); if (sample < audioInfo.sampleMin) { audioInfo.sampleMin = sample; } else if (sample > audioInfo.sampleMax) { audioInfo.sampleMax = sample; } toReturn[channel][index] = sample; } index++; } return toReturn; } But I need to show the audio's pitch, not amplitude. Fast Fourier transform appears to get the pitch, but it needs to know more variables than the raw bytes I have, and is very complex and mathematical. Is there a way I can do this?

  Read the article

• What is the IoC / "Springy" way to handle MVP in GWT? (Hint, probably not the Spring Roo 1.1 way)

  - by Ehrann Mehdan

  This is the Spring Roo 1.1 way of doing a factory that returns a GWT Activity (Yes, Spring Framework) public Activity getActivity(ProxyPlace place) { switch (place.getOperation()) { case DETAILS: return new EmployeeDetailsActivity((EntityProxyId<EmployeeProxy>)place.getProxyId(), requests, placeController, ScaffoldApp.isMobile() ? EmployeeMobileDetailsView.instance() : EmployeeDetailsView.instance()); case EDIT: return makeEditActivity(place); case CREATE: return makeCreateActivity(); } throw new IllegalArgumentException("Unknown operation " + place.getOperation()); } It seems to me that we just went back hundred of years if we use a switch case with constants to make a factory. Now this is official auto generated Spring roo 1.1 with GWT / GAE integration, I kid you not I can only assume this is some executives empty announcements because this is definitly not Spring It seems VMWare and Google were too fast to get something out and didn't quite finish it, isn't it? Am I missing something or this is half baked and by far not the way Spring + GWT MVP should work? Do you have a better example of how Spring, GWT (2.1 MVP approach) and GAE should connect? I would hate to do all the plumbing of managing history and activities like this. (no annotations? IOC?) I also would hate to reinvent the wheel and write my own Spring enhancement just to find someone else did the same, or worse, find out that SpringSource and Google will release roo 1.2 soon and make it right

  Read the article

• How to write a flexible modular program with good interaction possibilities between modules?

  - by PeterK

  I went through answers on similar topics here on SO but could't find a satisfying answer. Since i know this is a rather large topic, i will try to be more specific. I want to write a program which processes files. The processing is nontrivial, so the best way is to split different phases into standalone modules which then would be used as necessary (since sometimes i will be only interested in the output of module A, sometimes i would need output of five other modules, etc). The thing is, that i need the modules to cooperate, because the output of one might be the input of another. And i need it to be FAST. Moreover i want to avoid doing certain processing more than once (if module A creates some data which then need to be processed by module B and C, i don't want to run module A twice to create the input for modules B,C ). The information the modules need to share would mostly be blocks of binary data and/or offsets into the processed files. The task of the main program would be quite simple - just parse arguments, run required modules (and perhaps give some output, or should this be the task of the modules?). I don't need the modules to be loaded at runtime. It's perfectly fine to have libs with a .h file and recompile the program every time there is a new module or some module is updated. The idea of modules is here mainly because of code readability, maintaining and to be able to have more people working on different modules without the need to have some predefined interface or whatever (on the other hand, some "guidelines" on how to write the modules would be probably required, i know that). We can assume that the file processing is a read-only operation, the original file is not changed. Could someone point me in a good direction on how to do this in C++ ? Any advice is wellcome (links, tutorials, pdf books...).

  Read the article

• Full-text search in C++

  - by Jen

  I have a database of many (though relatively short) HTML documents. I want users to be able to search this database by entering one or more search words in a C++ desktop application. Hence, I’m looking for a fast full-text search solution. Ideally, it should: Skip common words, such as the, of, and, etc. Support stemming, i.e. search for run also finds documents containing runner, running and ran. Be able to update its index in the background as new documents are added to the database. Be able to provide search word suggestions (like Google Suggest) To illustrate, assume the database has just two documents: Document 1: This is a test of text search. Document 2: Testing is fun. The following words should be in the index: fun, search, test, testing, text. If the user types t in the search box, I want the application to be able to suggest test, testing and text (Ideally, the application should be able to query the search engine for the 10 most common search words starting with t). A search for testing should return both documents. Can you suggest a C or C++ based solution? (I’ve briefly reviewed CLucene and Xapian, but I’m not sure if either will address my needs, especially querying the search word indexes for the suggest feature).

  Read the article

• WPF closing child- closes parent-window

  - by Thomas Spranger

  i have the pretty same sample as mentioned here. Fast concluded: MainWindow closes when the last childwindow is closed. My Problem: I couldn't solve my problems with the described solutions. I can't produce a program where it als takes place. Only in one of my bigger progs. Maybe someone has an idea or knows any further steps. Thanks for reading - Thomas As requested here's a bit of code: This is the part in the MainWindow: bool editAfterSearch = false; Movie selectedMovie = (Movie)this.listView.SelectedItem; Movie backup = (Movie)selectedMovie.Clone(); if (new OnlineSearchWindow().EditMovieViaOnlineSearch(ref selectedMovie, out editAfterSearch)) { this.coverFlow.Update(selectedMovie); } And that's the part of the ChildWindow: public bool EditMovieViaOnlineSearch(ref Movie preset, out bool editAfter) { this.exitWithOk = false; this.editMovieAfterSearch = false; this.tbx_SearchTerm.Text = preset.Title; this.linkedMovie = preset; this.ShowDialog(); editAfter = editMovieAfterSearch; if (this.exitWithOk) { this.linkedMovie.CloneOnlineInformation(ref preset); preset.Bitmap = this.linkedMovie.Bitmap; return true; } else { return false; } }

  Read the article

• Fastest inline-assembly spinlock

  - by sigvardsen

  I'm writing a multithreaded application in c++, where performance is critical. I need to use a lot of locking while copying small structures between threads, for this I have chosen to use spinlocks. I have done some research and speed testing on this and I found that most implementations are roughly equally fast: Microsofts CRITICAL_SECTION, with SpinCount set to 1000, scores about 140 time units Implementing this algorithm with Microsofts InterlockedCompareExchange scores about 95 time units Ive also tried to use some inline assembly with __asm {} using something like this code and it scores about 70 time units, but I am not sure that a proper memory barrier has been created. Edit: The times given here are the time it takes for 2 threads to lock and unlock the spinlock 1,000,000 times. I know this isn't a lot of difference but as a spinlock is a heavily used object, one would think that programmers would have agreed on the fastest possible way to make a spinlock. Googling it leads to many different approaches however. I would think this aforementioned method would be the fastest if implemented using inline assembly and using the instruction CMPXCHG8B instead of comparing 32bit registers. Furthermore memory barriers must be taken into account, this could be done by LOCK CMPXHG8B (I think?), which guarantees "exclusive rights" to the shared memory between cores. At last [some suggests] that for busy waits should be accompanied by NOP:REP that would enable Hyper-threading processors to switch to another thread, but I am not sure whether this is true or not? From my performance-test of different spinlocks, it is seen that there is not much difference, but for purely academic purpose I would like to know which one is fastest. However as I have extremely limited experience in the assembly-language and with memory barriers, I would be happy if someone could write the assembly code for the last example I provided with LOCK CMPXCHG8B and proper memory barriers in the following template: __asm { spin_lock: ;locking code. spin_unlock: ;unlocking code. }

  Read the article

• Most efficient method of detecting/monitoring DOM changes?

  - by Graza

  I need an efficient mechanism for detecting changes to the DOM. Preferably cross-browser, but if there's any efficient means which are not cross browser, I can implement these with a fail-safe cross browser method. In particular, I need to detect changes that would affect the text on a page, so any new, removed or modified elements, or changes to inner text (innerHTML) would be required. I don't have control over the changes being made (they could be due to 3rd party javascript includes, etc), so it can't be approached from this angle - I need to "monitor" for changes somehow. Currently I've implemented a "quick'n'dirty" method which checks body.innerHTML.length at intervals. This won't of course detect changes which result in the same length being returned, but in this case is "good enough" - the chances of this happening are extremely slim, and in this project, failing to detect a change won't result in lost data. The problem with body.innerHTML.length is that it's expensive. It can take between 1 and 5 milliseconds on a fast browser, and this can bog things down a lot - I'm also dealing with a large-ish number of iframes and it all adds up. I'm pretty sure the expensiveness of doing this is because the innerHTML text is not stored statically by browsers, and needs to be calculated from the DOM every time it is read. The types of answers I am looking for are anything from the "precise" (for example event) to the "good enough" - perhaps something as "quick'n'dirty" as the innerHTML.length method, but that executes faster.

  Read the article

• List of Big-O for PHP functions?

  - by Kendall Hopkins

  After using PHP for a while now, I've noticed that not all PHP built in functions as fast as expected. Consider the below two possible implementations of a function that finds if a number is prime using a cached array of primes. //very slow for large $prime_array $prime_array = array( 2, 3, 5, 7, 11, 13, .... 104729, ... ); $result_array = array(); foreach( $array_of_number => $number ) { $result_array[$number] = in_array( $number, $large_prime_array ); } //still decent performance for large $prime_array $prime_array => array( 2 => NULL, 3 => NULL, 5 => NULL, 7 => NULL, 11 => NULL, 13 => NULL, .... 104729 => NULL, ... ); foreach( $array_of_number => $number ) { $result_array[$number] = array_key_exists( $number, $large_prime_array ); } This is because in_array is implemented with a linear search O(n) which will linearly slow down as $prime_array grows. Where the array_key_exists function is implemented with a hash lookup O(1) which will not slow down unless the hash table gets extremely populated (in which case it's only O(logn)). So far I've had to discover the big-O's via trial and error, and occasionally looking at the source code. Now for the question... I was wondering if there was a list of the theoretical (or practical) big O times for all* the PHP built in functions. *or at least the interesting ones For example find it very hard to predict what the big O of functions listed because the possible implementation depends on unknown core data structures of PHP: array_merge, array_merge_recursive, array_reverse, array_intersect, array_combine, str_replace (with array inputs), etc.

  Read the article

• Node & Redis: Crucial Design Issues in Production Mode

  - by Ali

  This question is a hybrid one, being both technical and system design related. I'm developing the backend of an application that will handle approx. 4K request per second. We are using Node.js being super fast and in terms of our database struction we are using MongoDB, with Redis being a layer between Node and MongoDB handling volatile operations. I'm quite stressed because we are expecting concurrent requests that we need to handle carefully and we are quite close to launch. However I do not believe I've applied the correct approach on redis. I have a class Student, and they constantly change stages(such as 'active', 'doing homework','in lesson' etc. Thus I created a Redis DB for each state. (1 for being 'active', 2 for being 'doing homework'). Above I have the structure of the 'active' students table; xa5p - JSON stringified object #1 pQrW - JSON stringified object #2 active_student_table - {{studentId:'xa5p'}, {studentId:'pQrW'}} Since there is no 'select all keys method' in Redis, I've been suggested to use a set such that when I run command 'smembers' I receive the keys and later on do 'get' for each id in order to find a specific user (lets say that age older than 15). I've been also suggested that in fact I used never use keys in production mode. My question is, no matter how 'conceptual' it is, what specific things I should avoid doing in Node & Redis in production stage?. Are they any issues related to my design? Students must be objects and I sure can list them in a list but I haven't done yet. Is it that crucial in production stage?

  Read the article

• protocol parsing in c

  - by nomad.alien

  I have been playing around with trying to implement some protocol decoders, but each time I run into a "simple" problem and I feel the way I am solving the problem is not optimal and there must be a better way to do things. I'm using C. Currently I'm using some canned data and reading it in as a file, but later on it would be via TCP or UDP. Here's the problem. I'm currently playing with a binary protocol at work. All fields are 8 bits long. The first field(8bits) is the packet type. So I read in the first 8 bits and using a switch/case I call a function to read in the rest of the packet as I then know the size/structure of it. BUT...some of these packets have nested packets inside them, so when I encounter that specific packet I then have to read another 8-16 bytes have another switch/case to see what the next packet type is and on and on. (Luckily the packets are only nested 2 or 3 deep). Only once I have the whole packet decoded can I handle it over to my state machine for processing. I guess this can be a more general question as well. How much data do you have to read at a time from the socket? As much as possible? As much as what is "similar" in the protocol headers? So even though this protocol is fairly basic, my code is a whole bunch of switch/case statements and I do a lot of reading from the file/socket which I feel is not optimal. My main aim is to make this decoder as fast as possible. To the more experienced people out there, is this the way to go or is there a better way which I just haven't figured out yet? Any elegant solution to this problem?

  Read the article

• What are some methods to prevent double posting in a form? (PHP)

  - by jpjp

  I want to prevent users from accidentally posting a comment twice. I use the PRG (post redirect get) method, so that I insert the data on another page then redirect the user back to the page which shows the comment. This allows users to refresh as many times as they want. However this doesn't work when the user goes back and clicks submit again or when they click submit 100 times really fast. I don't want 100 of the same comments. I looked at related questions on SO and found that a token is best. But I am having trouble using it. //makerandomtoken(20) returns a random 20 length char. <form method="post" ... > <input type="text" id="comments" name="comments" class="commentbox" /><br/> <input type="hidden" name="_token" value="<?php echo $token=makerandomtoken(20); ?>" /> <input type="submit" value="submit" name="submit" /> </form> if (isset($_POST['submit']) && !empty($comments)) { $comments= mysqli_real_escape_string($dbc,trim($_POST['comments'])); //how do I make the if-statment to check if the token has been already set once? if ( ____________){ //don't insert comment because already clicked submit } else{ //insert the comment into the database } } So I have the token as a hidden value, but how do I use that to prevent multiple clicking of submit. METHODS: someone suggested using sessions. I would set the random token to $_SESSION['_token'] and check if that session token is equal to the $_POST['_token'], but how do I do that? When I tried, it still doesn't check

  Read the article

• iPhone OpenGL ES Texture2D Masking

  - by Robert Neagu

  What's the best choice when trying to mask a texture like ColorSplash or other apps like iSteam, etc? I started learning OPENGL ES like... 4 days ago (I'm a total rookie) and tried the following approach: 1) I created a colored texture2D, a grayscale version of the first texture and a third texture2D called mask 2) I also created a texture2D for the brush... which is grayscale and it's opaque (brush = black = 0,0,0,1 and surroundings = white = 1,1,1,1). My intention was to create an antialiased brush with smooth edges but i'm fine with a normal one right now 3) I searched for masking techniques on the internet and found this tutorial ZeusCMD - Design and Development Tutorials : OpenGL ES Programming Tutorials - Masking about masking. The tutorial tells me to use blending to achieve masking... first draw colored, then mask with glBlendFunc(GL_DST_COLOR, GL_ZERO) and then grayscale with glBlendFunc(GL_ONE, GL_ONE) ... and this gives me something close to what i want... but not exactly what i want. The result is masked but it's somehow overbright-ed 4) For drawing to the mask texture i used an extra frame buffer object (FBO) I'm not really happy with the resulting image (overbright-ed picture) nor with the speed achieved with this method. I think the normal way was to draw directly to the grayscale (overlay) texture2D affecting only it's alpha channel in the places where the brush hits. Is there a fast way to achieve this? I have searched a lot and never got an answer that's clear and understandable. Then, in the main draw loop I could only draw the colored texture and then blend the grayscale ontop with glBlendFunc(GL_SRC_ALPHA, GL_ONE_MINUS_SRC_ALPHA). I just want to learn to use OPENGL ES and it's driving me nuts because i can't get it to work properly. An advice, a link to a tutorial would be much appreciated.

  Read the article

• CakePHP Routes: Messing With The MVC

  - by thesunneversets

  So we have a real-estate-related site that has controller/action pairs like "homes/view", "realtors/edit", and so forth. From on high it has been deemed a good idea to refactor the site so that URLS are now in the format "/realtorname/homes/view/id", and perhaps also "/admin/homes/view/id" and/or "/region/..." As a mere CakePHP novice I'm finding it difficult to achieve this in routes.php. I can do the likes of: Router::connect('/:filter/h/:id', array('controller'=>'homes','action'=>'view')); Router::connect('/admin/:controller/:action/:id'); But I'm finding that the id is no longer being passed simply and elegantly to the actions, now that controller and action do not directly follow the domain. Therefore, questions: Is it a stupid idea to play fast and loose with the /controller/action format in this way? Is there a better way of stating these routes so that things don't break egregiously? Would we be better off going back to subdomains (the initial method of achieving this type of functionality, shot down on potentially spurious SEO-related grounds)? Many thanks for any advice! I'm sorry that I'm such a newbie that I don't know whether I'm asking stupid questions or not....

  Read the article

• I get this error: "glibc detected"

  - by AKGMA

  Hi I just wrote a piece of CPP code and I compiled it using G++ in ubuntu. When I run my code everything is fine, the code runs well and gives output but doesn't exit and it gives this error: *** glibc detected *** ./a.out: free(): invalid next size (fast): 0x09f931f0 *** ======= Backtrace: ========= /lib/libc.so.6(+0x6c501)[0x3de501] /lib/libc.so.6(+0x6dd70)[0x3dfd70] /lib/libc.so.6(cfree+0x6d)[0x3e2e5d] /usr/lib/libstdc++.so.6(_ZdlPv+0x21)[0x6e2441] ./a.out[0x8049ce6] /lib/libc.so.6(+0x2f69e)[0x3a169e] /lib/libc.so.6(+0x2f70f)[0x3a170f] /lib/libc.so.6(__libc_start_main+0xef)[0x388cef] ./a.out[0x8048a61] ======= Memory map: ======== 00219000-0021a000 r-xp 00000000 00:00 0 [vdso] 00354000-00370000 r-xp 00000000 08:01 8781845 /lib/ld-2.12.1.so 00370000-00371000 r--p 0001b000 08:01 8781845 /lib/ld-2.12.1.so 00371000-00372000 rw-p 0001c000 08:01 8781845 /lib/ld-2.12.1.so 00372000-004c9000 r-xp 00000000 08:01 8781869 /lib/libc-2.12.1.so 004c9000-004ca000 ---p 00157000 08:01 8781869 /lib/libc-2.12.1.so 004ca000-004cc000 r--p 00157000 08:01 8781869 /lib/libc-2.12.1.so 004cc000-004cd000 rw-p 00159000 08:01 8781869 /lib/libc-2.12.1.so 004cd000-004d0000 rw-p 00000000 00:00 0 00638000-00717000 r-xp 00000000 08:01 3935829 /usr/lib/libstdc++.so.6.0.14 00717000-0071b000 r--p 000de000 08:01 3935829 /usr/lib/libstdc++.so.6.0.14 0071b000-0071c000 rw-p 000e2000 08:01 3935829 /usr/lib/libstdc++.so.6.0.14 0071c000-00723000 rw-p 00000000 00:00 0 00909000-0092d000 r-xp 00000000 08:01 8781918 /lib/libm-2.12.1.so 0092d000-0092e000 r--p 00023000 08:01 8781918 /lib/libm-2.12.1.so 0092e000-0092f000 rw-p 00024000 08:01 8781918 /lib/libm-2.12.1.so 00fdb000-00ff5000 r-xp 00000000 08:01 8781903 /lib/libgcc_s.so.1 00ff5000-00ff6000 r--p 00019000 08:01 8781903 /lib/libgcc_s.so.1 00ff6000-00ff7000 rw-p 0001a000 08:01 8781903 /lib/libgcc_s.so.1 08048000-0804b000 r-xp 00000000 08:01 8652645 /home/akg/Desktop/contest/a.out 0804b000-0804c000 r--p 00002000 08:01 8652645 /home/akg/Desktop/contest/a.out 0804c000-0804d000 rw-p 00003000 08:01 8652645 /home/akg/Desktop/contest/a.out 09f93000-09fb4000 rw-p 00000000 00:00 0 [heap] b7600000-b7621000 rw-p 00000000 00:00 0 b7621000-b7700000 ---p 00000000 00:00 0 b7765000-b7768000 rw-p 00000000 00:00 0 b7775000-b7779000 rw-p 00000000 00:00 0 bf9a7000-bf9c8000 rw-p 00000000 00:00 0 [stack] Aborted What does this mean? How can i get rid of it? I'm not using malloc or free , I'm just using vector!

  Read the article

< Previous Page | 202 203 204 205 206 207 208 209 210 211 212 213  | Next Page >