Search Results

Search found 9611 results on 385 pages for 'low power'.

Page 206/385 | < Previous Page | 202 203 204 205 206 207 208 209 210 211 212 213  | Next Page >

• Can a web server and XBMC HTPC co exist happily?

  - by Mild Fuzz

  I have a machine that is currently dedicated to running my home theatre. It is way more powerful than it needs to be, and spec wise would have no problem running both a few websites and an HTPC What I wanted to know is that is this was a reasonable thing to expect of a single machine? 90% of the time, all it's power would be just for the web server ( and the odd torrent) Currently it's running Windows, but I am pretty sure I will have to turn it into a Linux box Will I run into any problems? Is there anything I need to know before I start? Any prerequisites? The webserver will be required to run Ruby on Rails sites mainly, but might be called upon to run PHP for Wordpress also.

  Read the article

• Re-assembling the RAID-5 array reboots my CentOS-5 machine

  - by xraminx

  I have 3 HDD's, each divided into 3 partitions. I had created a RAID-1 for boot partition md0 created from sda0, sdb0 and had also created two RAID-5 arrays: md1 created from sda1, sdb1, sdc1 md2 created from sda2, sdb2, sdc2 It used to work fine but one day I had to power off the machine (cold reboot) to get any response from the machine. After that, when the system started booting, it tried for a while to reconstruct the RAID arrays but after a few minutes it crashed silently. I booted the system in linux rescue mode from the DVD and tried to re-assemble the RAID devices manually. I was able to re-assemble md0 and md1 using: mdadm --assemble --scan /dev/md0 mdadm --assemble --scan /dev/md1 But when I try to re-assemble md2 using: mdadm --assemble --scan /dev/md2 the system reboots silently again. How can I fix this problem?

  Read the article

• How to convert eps file to a large jpeg image

  - by Anand

  Hello, I am using Linux. I want to convert an eps file to jpeg file. I find that I can use "convert" command. However, the resulting image looks very small. I want to enlarge the jpeg file by -resize option. It seems not to work. The resulting image is a pure black one. Do anyone has the same problem? Here are more details: 1: if I use convert -scale 1000x1000 your.eps your.jpg the resulting image looks like a low quality image. The eps vector image is not scaled properly. 2: if I use convert -geometry 300% your.eps your.jpg I get a pure black image. Here is my phf file: 2shared.com/document/RXl2Be-g/askquestions.html and my eps file: 2shared.com/file/qrmwKegj/askquestions.html Thank you very much for your help!

  Read the article

• Installing List Compenent on Sharepoint Server

  - by Tom

  I added the Sharepoint site to the 'Document Management' section in CRM with the List Components checked and it added it with no problem. Also when I navigate to the 'Documents' section under an account it shows up with the format of the List components. However, if i click on 'New' or 'Actions' I get the following error message: An Error has occured in the script on this page. Error: Access is denied URL: https://*serveraddress*/crmgrid/scripts/crmmenu.htc Do you want to continue running scripts on this page? I have ran the power script which added the MIME .htc extention to IIS. Does anyone know what might be wrong?

  Read the article

• are there ever deals on macbooks

  - by John

  I am fed up with hot running dell laptops. I think I am at the point where I want a fast and mobile machine that does not get hot and has decent battery power. I was provided IBM thinkpad from work ...on which I put ubuntu and i was satisfied with it for a year. Now I am quitting my current work and time has come for met to reveal to them that I put ubuntu on it. All in all I will be without a laptop in a week and am thinking about getting a mac book pro. I have never bought an apple product before, so curious...are there ever any deals on macbooks? Or whatever the price is ...that is it.

  Read the article

• HP Server bios boot delay

  - by jjrab

  I'm just going to throw this out there in case anyone else has run accross this... I have an HP DL320 G5p that had the motherboard replaced due to a faulty NIC port. After several calls to HP, two motherboard replacements, PCI riser card replacements, Processor replacement, and power supply replacement, the server takes approx. 10 minutes before it boots into the BIOS. It then boots up with no issues. We've run the HP smart start cd and performed the system tests and everything passed. All firmware has also been upgraded to the latest as well. Has anyone else seen this and found a fix? I am still working with HP, but there seems to be a struggle on their part to figure this out, so I'm curious to know if anyone else has experienced this and found a fix - thanks...

  Read the article

• Intel Server Board S3420GP fails to boot with video connected

  - by Riley

  All, Building a new system using an Intel Server Board S3420GP motherboard and an Intel Xeon X3440 processor. Before installing this motherboard into the chassis we want to test that it will actually boot correctly. We have mounted the processor and RAM with no hard drives attached. The boot sequence differs between the next variable: 1) Connecting video results in the system fans ramp up and down, twice, and then the system beeps with the same behavior repeating; the system status light shows "Amber" 2) With no video, the system goes through POST and the diag LEDs show that the system is missing a bootable device Need some assistance identifying why the board would fail to POST with video connected. // Update // Using another Power Supply the system gets passed the fans ramping up and down twice. Video still does not display.

  Read the article

• Wake timers don't wake computer from sleep mode

  - by Joe

  I'm got a custom built PC running 64 bit Windows 7 Ultimate. So far everything works great except for one thing: it will not wake up from sleep mode for a wake timer or scheduled task. Sleep mode itself works great. If it's sleeping, it wakes successfully when I press the power button, mash the keyboard, wiggle the mouse, or send a WOL packet. The only problem is wake timers. I even tried the program WakeupOnStandBy but it looks like that uses wake timers, so it doesn't do anything for me either. And yes, wake timers are enabled: Any ideas on how to fix the problem, or troubleshoot it? I'd imagine that there would be a log somewhere telling me exactly why the wake timers are having trouble, but if there is I haven't found it.

  Read the article

• USB to IDE/SATA adapter

  - by unknown (google)

  I have an old IDE HDD that I am trying to pull files off of. I am using a USD to IDE/SATA adapter. I plug in the power and adapter plugs into the drive and it fires up. I plug the USB plug into my XP laptop and it installs the drivers. I can see USB Mass Storage Device under Device Manager. My problem is I can't see the drive in either Windows Explorer or under Disk Management under Computer Management. Not sure what I am doing wrong. Do I have to slave the old hdd? Do I have to make BIOS changes?

  Read the article

• MacBook Pro - 72k vs 54k rpm drives - Heat and Noise

  - by webworm

  I am looking at a new 15" MacBook Pro for development purposes. I am planning to run a Virtual Machine for about 50% of my work (Windows 7 x64, IIS, SQL Server, and VS 2010). The upgrade from a 54000 rpm drive to a 72000 rpm is only $45. From what I understand the faster rotational speed of the 72000 rpm drive will help virtual machine performance. However, I am concerned that additional heat and fan noise might be an issue. I will be running mostly on A/C power so decreased battery life is not a major concern for me. Since I would be running with a Core i7 processor which gives off a fair amount of heat already I was wondering if it might be best to stay at 54000 rpm for the hard drive. What do you all think? Thanks!

  Read the article

• How can you control the speed of fan that comes with the Antec Sonata III case from the outside?

  - by Emil Lerch

  The Antec Sonata III case comes with a nice 120mm fan that has a 3 speed switch. Most of the time the fan is fine on low, but for games or other taxing workloads I need to switch it to medium or high. Opening the case every time I want to change the setting is kind of a pain. Has anyone figured out a way to control the speed from the outside of the case without going nuclear (e.g. cutting holes in the case)? Other than this annoyance I like the case and the fan that comes with it.

  Read the article

• Video issues with old server running Boxee

  - by Skaughty

  I have a old Dell Power Edge 1650 1U rackmount server running Windows XP. Dual 1.3 ghz Processors and 1 GB of RAM. I would like to run Boxee on it, but the 8mb integrated video card will not support it. The font within Boxee just comes up as blocks of color. I have a PCI Radion R9000 dual out video card. However when I plug it in I can not get video signal on any of the VGA outs. Is it possible to upgrade the video card on this old of a server, or is it possible to make it work with the older integrated video?

  Read the article

• Error starting Hyper-V VM

  - by Peter Bernier

  I'm trying to start a VM on a new Hyper-V installation and I'm receiving the following error: The virtual machine could not be started because the hypervisor is not running. The following actions may help you resolve the problem: 1) Verify that the processor of the physical computer has a supported version of hardware-assisted virtualization. 2) Verify that hardware-assisted virtualization and hardware-assisted data execution protection are enabled in the BIOS of the physical computer. (If you edit the BIOS to enable either setting, you must turn off the power to the physical computer and then turn it back on. Resetting the physical computer is not sufficient.) 3) If you have made changes to the Boot Configuration Data store, review these changes to ensure that the hypervisor is configured to launch automatically. My machine supports virtualization at the hardware level and it is enabled in BIOS. Why am I receiving this error?

  Read the article

• Win7 Prof. Computer won't wake on lan via Magic Packet from outside network

  - by Michael

  Hi all. I just purchased a new computer running Windows 7 Professional x64. I'd like to save power by having it sleep after an hour, but I would also like to be able to Remote Desktop into it at my leisure. I set up a static IP and have port forwarding set up on the router. If the computer is awake, the RDP connection works just fine. I downloaded and installed Wake-On-Lan thanks to this article If I put my new computer to sleep and send the magic packet from my old computer inside of my home network it wakes up. If I do the same thing, however, from my work computer outside the network it does not. I figured the Firewall was blocking the incoming traffic, but nothing in the Windows Firewall logs points to this happening. I'm wondering if anyone has any suggestions or any tests I can run through in order to narrow down what the problem might be. Thanks in advance for any help you might be able to offer.

  Read the article

• Dell laptop doesn't wake from hibernation after installing Windows 8.1

  - by Mike Cole

  My laptop worked flawlessly before upgrade to Windows 8.1 from 8. Now when I close the lid of my laptop and it goes into hibernation, it will not wake again. The LED lights seem to work properly but I don't get any video. I have to hold the power key to turn off then turn it back on again. It wakes from sleep properly. All Windows Updates have been installed. There are 2-3 items in the Device Manager that do not have compatible 8.1 drivers, but I believe those are security related items like fingerprint scanner.

  Read the article

• How to make the start menu find a program based on a custom keyword?

  - by Pierre-Alain Vigeant

  I am searching for a way to type a keyword in the start menu Search programs and files field and that it will return the application that match the keyword. An example will better explain this: Suppose that I want to start the powershell. Currently what I can type in the search field is power and the first item that appear is the 64bits powershell shortcut. Now suppose that I'd like ps to return powershell as the first item of the search list. Currently, typing ps return all files with the .ps extension, along with a control panel options about recording steps but not the powershell executable itself. How can I do that?

  Read the article

• How to disable Windows 8 lock screen?

  - by Filip

  So I took a plunge and installed Windows 8 Consumer Preview on my main home PC. So far so good, but there is one annoyance - the system "locks" the computer after a period of inactivity causing me to re-enter my password. I really would like to avoid this, but have no idea how. I already tried the power settings (no pass on wake up) and the screen saver settings with no luck. Is this some sort of bug, or am I missing something? P.S. In this case I favor convenience over security.

  Read the article

• Recommended RAM and disc space for Oracle 11g on Windows

  - by Álvaro G. Vicario

  I need to provide the recommended amount of RAM and disc space (divided in two partitions) so the customer can create an appropriate virtual machine to run Oracle. All I could find in the documentation was a brief listing with minimum RAM and typical/advanced install types. The virtual machine will run latest Oracle Standard Edition One (11g release 2 so far) under Windows Server 2008 x64 and will host a reasonably low traffic web application. How much RAM and disc must I ask for in order to be safe? (Feel free to ask for further details if I've omitted something relevant.) Update: Rough estimations: Database size: 10 MB after installation Growth rate: +3MB per day on average Size of database 'active' data: (not sure of what this means, there's not actual archive so I guess all data is current) Amount of data written per second in peak hours: a few KB Number of client sessions: 3 or 4 at most Frequency and response size of most heavy requests: some reports make heavy table JOINS that need up to 20 seconds to complete but they won't return more than a few thousand rows with plain text. The app also handles BLOBs (typical size from 50KB to 200KB)

  Read the article

• new SBS 2011 Standard problems

  - by Damon

  Brand new SBS 2011 install. I went to remove the DHCP server role. It went into a "Preparing to configure Windows. Do not turn off your computer." Been there for hours. Finally, decided to power off and restart. After boot up, the same window and message appear and it just sits there spinning. "Preparing to configure Windows. Do not turn off your computer." I'd love to get this installed before the end of the day but it doesn't look like that's possible. Any ideas on how to get passed this?

  Read the article

• How can I dual install Ubuntu 10.4 in a Mac Mini with 10.4.11?

  - by Marco Mariani

  I'd like to power-up my aging Mac Mini (1.5GHz Core Solo, 1GB RAM, Tiger 10.4.11) by installing a shiny Ubuntu alongside the current OS. After all, I use Ubuntu for everything save for cleaning my teeth. Since it's my first and only Mac and I have next to no experience with the OS (having used it basically as a media player) I am a little concerned about rEFIt, ELILO, Boot Camp and the fact that it's basically a 4.5 years old unsupported machine and I might get asleep reinstalling everything several times. I've used the live desktop-i386 CD and everything works. I tried with an external USB drive instead of a CD but couldn't make it boot. As for installing Ubuntu, the howtos I've found give several alternatives depending on the model, the OSX version, etc.. but they usually talk about newer machines. Which howto should I follow to repartition, and boot thereafter? Thanks

  Read the article

• IBM BladeServer Chassis compatibility

  - by Matt

  Hi, I'm looking at buying a 3 year old blade server. My question is, if I buy it and want to insert a current model blade, will it fit? Also, if the chassis goes "POP" and I need to replace it, will the current model chassis fit 3 year old blades? What about Power supply replacements? The chassis I'm looking at is this: IBM FRU / PN: M8677-3XM with DVD reader The blades are all IBM HS20's. We've had a good run with IBM hardware and although there is some nice ex-lease HP hardware available, my understanding is that backwards comparability is not so well maintained. Is this true?

  Read the article

• 1000 HZ linux kernel necessary if I have tickless and high resolution timer?

  - by Bob

  I am trying to improve performance on my server. I have a few processes that need low jitter (less than 10ms variance). I have a load average of 4 maximum on an i7-920 (4 physical cores, 8 with HT). There are about 10 processes ranging from 40% to 90% of a core user mode. System usage is 3% total. Total CPU usage is 80% max. Will setting the kernel from 100hz to 1000hz improve the jitter if tickless and high resolution timers are already set? This page seems to indicate it still does something. https://lkml.org/lkml/2009/4/28/401 How about changing from voluntary (PREEMPT_VOLUNTARY) to preemptible (PREEMPT)?

  Read the article

• Any ideas for automatic initial/scripted configuration of a NetApp?

  - by maddenca

  The background is to make a solution where we can automate as much as possible the building up of ‘pods’ that include server/network/storage and that will be built at remote sites. In an ideal world would be that we create a single management server which is preconfigured with DHCP/TFTP/or whatever. This management server is racked with a CISCO UCS, FAS31x0, etc. at a build site and is then transported to the final customer site where on power it almost configures itself, or at least bootstraps itself far enough that a remote skilled 'expert' can complete the setup of the pod. Ideas (doesn't have to resemble 100% of the above) would be helpful.

  Read the article

• How to create Raid 10 with megacli

  - by Henno

  I have OpenFiler storage server. Without installing Windows and MSM, I want to create raid10 array from disks 2 to 21. I have already successfully installed MegaCli to OpenFiler but I'm stuck in figuring out the correct command line for creating a raid 10 array. The documentations says that the syntax for creating a raid 10 is: MegaCli -CfgSpanAdd -r10 -Array0[E:S,E:S] -Array1[E:S,E:S] -aN My enclosure ID is 25, so: [root@linux-h5ut ~]# MegaCli -CfgSpanAdd -r10 -Array0[E25:S02,E25:S21] -Array1[E25:S02,E25:S21] WB Cached NoCachedBadBBU -a0 Invalid input at or near token E I have googled high and low but there doesn't seem to be any example doing raid10 with megaraid (only the syntax). Can anyone explain what is wrong?

  Read the article

• What is Light Peak

  - by Jonathan.

  I've heard this a lot recently, todo with Apple and Intel. Some says it's a protocol, others say it's fibre optic, and others say it's copper. One source even said it was a "wireless wire". Apparently it can carry data, but not video streams, surely the cable can't know the difference between 1s and 0s representing data, and 1s and 0s representing video streams. Or it will replace all the wires we currently have except power, another place said it is for inside laptops. Those are just examples so I haven't given any sources, I just want to know what on Earth Light Peak is?

  Read the article

< Previous Page | 202 203 204 205 206 207 208 209 210 211 212 213  | Next Page >