Search Results

Search found 5435 results on 218 pages for 'ones and zeroes'.

Page 206/218 | < Previous Page | 202 203 204 205 206 207 208 209 210 211 212 213  | Next Page >

• Screenshot Tour: Ubuntu Touch 14.04 on a Nexus 7

  - by Chris Hoffman

  Ubuntu 14.04 LTS will “form the basis of the first commercially available Ubuntu tablets,” according to Canonical. We installed Ubuntu Touch 14.04 on our own hardware to see what those tablets will be like. We don’t recommend installing this yourself, as it’s still not a polished, complete experience. We’re using “Ubuntu Touch” as shorthand here — apparently this project’s new name is “Ubuntu For Devices.” The Welcome Screen Ubuntu’s touch interface is all about edge swipes and hidden interface elements — it has a lot in common with Windows 8, actually. You’ll see the welcome screen when you boot up or unlock a Ubuntu tablet or phone. If you have new emails, text messages, or other information, it will appear on this screen along with the time and date. If you don’t, you’ll just see a message saying “No data sources available.” The Dash Swipe in from the right edge of the welcome screen to access the Dash, or home screen. This is actually very similar to the Dash on Ubuntu’s Unity desktop. This isn’t a surprise — Canonical wants the desktop and touch versions of Ubuntu to use the same code. In the future, the desktop and touch versions of Ubuntu will use the same version of Unity and Unity will adjust its interface depending on what type of device your’e using. Here you’ll find apps you have installed and apps available to install. Tap an installed app to launch it or tap an available app to view more details and install it. Tap the My apps or Available headings to view a complete list of apps you have installed or apps you can install. Tap the Search box at the top of the screen to start searching — this is how you’d search for new apps to install. As you’d expect, a touch keyboard appears when you tap in the Search field or any other text field. The launcher isn’t just for apps. Tap the Apps heading at the top of the screen and you’ll see hidden text appear — Music, Video, and Scopes. This hidden navigation is used throughout Ubuntu’s different apps and can be easy to miss at first. Swipe to the left or right to move between these screens. These screens are also similar to the different panels in Unity on the desktop. The Scopes section allows you to view different search scopes you have installed. These are used to search different sources when you start a search from the Dash. Search from the Music or Videos scopes to search for local media files on your device or media files online. For example, searching in the Music scope will show you music results from Grooveshark by default. Navigating Ubuntu Touch Swipe in from the left edge anywhere on the system to open the launcher, a bar with shortcuts to apps. This launcher is very similar to the launcher on the left of Ubuntu’s Unity desktop — that’s the whole idea, after all. Once you’ve opened an app, you can leave the app by swiping in from the left. The launcher will appear — keep moving your finger towards the right edge of teh screen. This will swipe the current app off the screen, taking you back to the Dash. Once back on the Dash, you’ll see your open apps represented as thumbnails under Recent. Tap a thumbnail here to go back to a running app. To remove an app from here, long-press it and tap the X button that appears. Swipe in from the right edge in any app to quickly switch between recent apps. Swipe in from the right edge and hold your finger down to reveal an application switcher that shows all your recent apps and lets you choose between them. Swipe down from the top of the screen to access the indicator panel. Here you can connect to Wi-Fi networks, view upcoming events, control GPS and Bluetooth hardware, adjust sound settings, see incoming messages, and more. This panel is for quick access to hardware settings and notifications, just like the indicators on Ubuntu’s Unity desktop. The Apps System settings not included in the pull-down panel are available in the System Settings app. To access it, tap My apps on the Dash and tap System Settings, search for the System Settings app, or open the launcher bar and tap the settings icon. The settings here a bit limited compared to other operating systems, but many of the important options are available here. You can add Evernote, Ubuntu One, Twitter, Facebook, and Google accounts from here. A free Ubuntu One account is mandatory for downloading and updating apps. A Google account can be used to sync contacts and calendar events. Some apps on Ubuntu are native apps, while many are web apps. For example, the Twitter, Gmail, Amazon, Facebook, and eBay apps included by default are all web apps that open each service’s mobile website as an app. Other applications, such as the Weather, Calendar, Dialer, Calculator, and Notes apps are native applications. Theoretically, both types of apps will be able to scale to different screen resolutions. Ubuntu Touch and Ubuntu desktop may one day share the same apps, which will adapt to different display sizes and input methods. Like Windows 8 apps, Ubuntu apps hide interface elements by default, providing you with a full-screen view of the content. Swipe up from the bottom of an app’s screen to view its interface elements. For example, swiping up from the bottom of the Web Browser app reveals Back, Forward, and Refresh buttons, along with an address bar and Activity button so you can view current and recent web pages. Swipe up even more from the bottom and you’ll see a button hovering in the middle of the app. Tap the button and you’ll see many more settings. This is an overflow area for application options and functions that can’t fit on the navigation bar. The Terminal app has a few surprising Easter eggs in this panel, including a “Hack into the NSA” option. Tap it and the following text will appear in the terminal: That’s not very nice, now tracing your location . . . . . . . . . . . .Trace failed You got away this time, but don’t try again. We’d expect to see such Easter eggs disappear before Ubuntu Touch actually ships on real devices. Ubuntu Touch has come a long way, but it’s still not something you want to use today. For example, it doesn’t even have a built-in email client — you’ll have to us your email service’s mobile website. Few apps are available, and many of the ones that are are just mobile websites. It’s not a polished operating system intended for normal users yet — it’s more of a preview for developers and device manufacturers. If you really want to try it yourself, you can install it on a Wi-Fi Nexus 7 (2013), Nexus 10, or Nexus 4 device. Follow Ubuntu’s installation instructions here.

  Read the article

• SharePoint logging to a list

  - by Norgean

  I recently worked in an environment with several servers. Locating the correct SharePoint log file for error messages, or development trace calls, is cumbersome. And once the solution hit the cloud, it got even worse, as we had no access to the log files at all. Obviously we are not the only ones with this problem, and the current trend seems to be to log to a list. This had become an off-hour project, so rather than do the sensible thing and find a ready-made solution, I decided to do it the hard way. So! Fire up Visual Studio, create yet another empty SharePoint solution, and start to think of some requirements. Easy on/offI want to be able to turn list-logging on and off.Easy loggingFor me, this means being able to use string.Format.Easy filteringLet's have the possibility to add some filtering columns; category and severity, where severity can be "verbose", "warning" or "error". Easy on/off Well, that's easy. Create a new web feature. Add an event receiver, and create the list on activation of the feature. Tear the list down on de-activation. I chose not to create a new content type; I did not feel that it would give me anything extra. I based the list on the generic list - I think a better choice would have been the announcement type. Approximately: public void CreateLog(SPWeb web)         {             var list = web.Lists.TryGetList(LogListName);             if (list == null)             {                 var listGuid = web.Lists.Add(LogListName, "Logging for the masses", SPListTemplateType.GenericList);                 list = web.Lists[listGuid];                 list.Title = LogListTitle;                 list.Update();                 list.Fields.Add(Category, SPFieldType.Text, false);                 var stringColl = new StringCollection();                 stringColl.AddRange(new[]{Error, Information, Verbose});                 list.Fields.Add(Severity, SPFieldType.Choice, true, false, stringColl);                 ModifyDefaultView(list);             }         }Should be self explanatory, but: only create the list if it does not already exist (d'oh). Best practice: create it with a Url-friendly name, and, if necessary, give it a better title. ...because otherwise you'll have to look for a list with a name like "Simple_x0020_Log". I've added a couple of fields; a field for category, and a 'severity'. Both to make it easier to find relevant log messages. Notice that I don't have to call list.Update() after adding the fields - this would cause a nasty error (something along the lines of "List locked by another user"). The function for deleting the log is exactly as onerous as you'd expect:         public void DeleteLog(SPWeb web)         {             var list = web.Lists.TryGetList(LogListTitle);             if (list != null)             {                 list.Delete();             }         } So! "All" that remains is to log. Also known as adding items to a list. Lots of different methods with different signatures end up calling the same function. For example, LogVerbose(web, message) calls LogVerbose(web, null, message) which again calls another method which calls: private static void Log(SPWeb web, string category, string severity, string textformat, params object[] texts)         {             if (web != null)             {                 var list = web.Lists.TryGetList(LogListTitle);                 if (list != null)                 {                     var item = list.AddItem(); // NOTE! NOT list.Items.Add… just don't, mkay?                     var text = string.Format(textformat, texts);                     if (text.Length > 255) // because the title field only holds so many chars. Sigh.                         text = text.Substring(0, 254);                     item[SPBuiltInFieldId.Title] = text;                     item[Degree] = severity;                     item[Category] = category;                     item.Update();                 }             } // omitted: Also log to SharePoint log.         } By adding a params parameter I can call it as if I was doing a Console.WriteLine: LogVerbose(web, "demo", "{0} {1}{2}", "hello", "world", '!'); Ok, that was a silly example, a better one might be: LogError(web, LogCategory, "Exception caught when updating {0}. exception: {1}", listItem.Title, ex); For performance reasons I use list.AddItem rather than list.Items.Add. For completeness' sake, let us include the "ModifyDefaultView" function that I deliberately skipped earlier.         private void ModifyDefaultView(SPList list)         {             // Add fields to default view             var defaultView = list.DefaultView;             var exists = defaultView.ViewFields.Cast<string>().Any(field => String.CompareOrdinal(field, Severity) == 0);               if (!exists)             {                 var field = list.Fields.GetFieldByInternalName(Severity);                 if (field != null)                     defaultView.ViewFields.Add(field);                 field = list.Fields.GetFieldByInternalName(Category);                 if (field != null)                     defaultView.ViewFields.Add(field);                 defaultView.Update();                   var sortDoc = new XmlDocument();                 sortDoc.LoadXml(string.Format("<Query>{0}</Query>", defaultView.Query));                 var orderBy = (XmlElement) sortDoc.SelectSingleNode("//OrderBy");                 if (orderBy != null && sortDoc.DocumentElement != null)                     sortDoc.DocumentElement.RemoveChild(orderBy);                 orderBy = sortDoc.CreateElement("OrderBy");                 sortDoc.DocumentElement.AppendChild(orderBy);                 field = list.Fields[SPBuiltInFieldId.Modified];                 var fieldRef = sortDoc.CreateElement("FieldRef");                 fieldRef.SetAttribute("Name", field.InternalName);                 fieldRef.SetAttribute("Ascending", "FALSE");                 orderBy.AppendChild(fieldRef);                   fieldRef = sortDoc.CreateElement("FieldRef");                 field = list.Fields[SPBuiltInFieldId.ID];                 fieldRef.SetAttribute("Name", field.InternalName);                 fieldRef.SetAttribute("Ascending", "FALSE");                 orderBy.AppendChild(fieldRef);                 defaultView.Query = sortDoc.DocumentElement.InnerXml;                 //defaultView.Query = "<OrderBy><FieldRef Name='Modified' Ascending='FALSE' /><FieldRef Name='ID' Ascending='FALSE' /></OrderBy>";                 defaultView.Update();             }         } First two lines are easy - see if the default view includes the "Severity" column. If it does - quit; our job here is done.Adding "severity" and "Category" to the view is not exactly rocket science. But then? Then we build the sort order query. Through XML. The lines are numerous, but boring. All to achieve the CAML query which is commented out. The major benefit of using the dom to build XML, is that you may get compile time errors for spelling mistakes. I say 'may', because although the compiler will not let you forget to close a tag, it will cheerfully let you spell "Name" as "Naem". Whichever you prefer, at the end of the day the view will sort by modified date and ID, both descending. I added the ID as there may be several items with the same time stamp. So! Simple logging to a list, with sensible a view, and with normal functionality for creating your own filterings. I should probably have added some more views in code, ready filtered for "only errors", "errors and warnings" etc. And it would be nice to block verbose logging completely, but I'm not happy with the alternatives. (yetanotherfeature or an admin page seem like overkill - perhaps just removing it as one of the choices, and not log if it isn't there?) Before you comment - yes, try-catches have been removed for clarity. There is nothing worse than having a logging function that breaks your site!

  Read the article

• Query optimization using composite indexes

  - by xmarch

  Many times, during the process of creating a new Coherence application, developers do not pay attention to the way cache queries are constructed; they only check that these queries comply with functional specs. Later, performance testing shows that these perform poorly and it is then when developers start working on improvements until the non-functional performance requirements are met. This post describes the optimization process of a real-life scenario, where using a composite attribute index has brought a radical improvement in query execution times.  The execution times went down from 4 seconds to 2 milliseconds! E-commerce solution based on Oracle ATG – Endeca In the context of a new e-commerce solution based on Oracle ATG – Endeca, Oracle Coherence has been used to calculate and store SKU prices. In this architecture, a Coherence cache stores the final SKU prices used for Endeca baseline indexing. Each SKU price is calculated from a base SKU price and a series of calculations based on information from corporate global discounts. Corporate global discounts information is stored in an auxiliary Coherence cache with over 800.000 entries. In particular, to obtain each price the process needs to execute six queries over the global discount cache. After the implementation was finished, we discovered that the most expensive steps in the price calculation discount process were the global discounts cache query. This query has 10 parameters and is executed 6 times for each SKU price calculation. The steps taken to optimise this query are described below; Starting point Initial query was: String filter = "levelId = :iLevelId AND  salesCompanyId = :iSalesCompanyId AND salesChannelId = :iSalesChannelId "+ "AND departmentId = :iDepartmentId AND familyId = :iFamilyId AND brand = :iBrand AND manufacturer = :iManufacturer "+ "AND areaId = :iAreaId AND endDate >=  :iEndDate AND startDate <= :iStartDate"; Map<String, Object> params = new HashMap<String, Object>(10); // Fill all parameters. params.put("iLevelId", xxxx); // Executing filter. Filter globalDiscountsFilter = QueryHelper.createFilter(filter, params); NamedCache globalDiscountsCache = CacheFactory.getCache(CacheConstants.GLOBAL_DISCOUNTS_CACHE_NAME); Set applicableDiscounts = globalDiscountsCache.entrySet(globalDiscountsFilter); With the small dataset used for development the cache queries performed very well. However, when carrying out performance testing with a real-world sample size of 800,000 entries, each query execution was taking more than 4 seconds. First round of optimizations The first optimisation step was the creation of separate Coherence index for each of the 10 attributes used by the filter. This avoided object deserialization while executing the query. Each index was created as follows: globalDiscountsCache.addIndex(new ReflectionExtractor("getXXX" ) , false, null); After adding these indexes the query execution time was reduced to between 450 ms and 1s. However, these execution times were still not good enough.  Second round of optimizations In this optimisation phase a Coherence query explain plan was used to identify how many entires each index reduced the results set by, along with the cost in ms of executing that part of the query. Though the explain plan showed that all the indexes for the query were being used, it also showed that the ordering of the query parameters was "sub-optimal".  Parameters associated to object attributes with high-cardinality should appear at the beginning of the filter, or more specifically, the attributes that filters out the highest of number records should be placed at the beginning. But examining corporate global discount data we realized that depending on the values of the parameters used in the query the “good” order for the attributes was different. In particular, if the attributes brand and family had specific values it was more optimal to have a different query changing the order of the attributes. Ultimately, we ended up with three different optimal variants of the query that were used in its relevant cases: String filter = "brand = :iBrand AND familyId = :iFamilyId AND departmentId = :iDepartmentId AND levelId = :iLevelId "+ "AND manufacturer = :iManufacturer AND endDate >= :iEndDate AND salesCompanyId = :iSalesCompanyId "+ "AND areaId = :iAreaId AND salesChannelId = :iSalesChannelId AND startDate <= :iStartDate"; String filter = "familyId = :iFamilyId AND departmentId = :iDepartmentId AND levelId = :iLevelId AND brand = :iBrand "+ "AND manufacturer = :iManufacturer AND endDate >=  :iEndDate AND salesCompanyId = :iSalesCompanyId "+ "AND areaId = :iAreaId  AND salesChannelId = :iSalesChannelId AND startDate <= :iStartDate"; String filter = "brand = :iBrand AND departmentId = :iDepartmentId AND familyId = :iFamilyId AND levelId = :iLevelId "+ "AND manufacturer = :iManufacturer AND endDate >= :iEndDate AND salesCompanyId = :iSalesCompanyId "+ "AND areaId = :iAreaId AND salesChannelId = :iSalesChannelId AND startDate <= :iStartDate"; Using the appropriate query depending on the value of brand and family parameters the query execution time dropped to between 100 ms and 150 ms. But these these execution times were still not good enough and the solution was cumbersome. Third and last round of optimizations The third and final optimization was to introduce a composite index. However, this did mean that it was not possible to use the Coherence Query Language (CohQL), as composite indexes are not currently supporte in CohQL. As the original query had 8 parameters using EqualsFilter, 1 using GreaterEqualsFilter and 1 using LessEqualsFilter, the composite index was built for the 8 attributes using EqualsFilter. The final query had an EqualsFilter for the multiple extractor, a GreaterEqualsFilter and a LessEqualsFilter for the 2 remaining attributes.  All individual indexes were dropped except the ones being used for LessEqualsFilter and GreaterEqualsFilter. We were now running in an scenario with an 8-attributes composite filter and 2 single attribute filters. The composite index created was as follows: ValueExtractor[] ve = { new ReflectionExtractor("getSalesChannelId" ), new ReflectionExtractor("getLevelId" ),    new ReflectionExtractor("getAreaId" ), new ReflectionExtractor("getDepartmentId" ),    new ReflectionExtractor("getFamilyId" ), new ReflectionExtractor("getManufacturer" ),    new ReflectionExtractor("getBrand" ), new ReflectionExtractor("getSalesCompanyId" )}; MultiExtractor me = new MultiExtractor(ve); NamedCache globalDiscountsCache = CacheFactory.getCache(CacheConstants.GLOBAL_DISCOUNTS_CACHE_NAME); globalDiscountsCache.addIndex(me, false, null); And the final query was: ValueExtractor[] ve = { new ReflectionExtractor("getSalesChannelId" ), new ReflectionExtractor("getLevelId" ),    new ReflectionExtractor("getAreaId" ), new ReflectionExtractor("getDepartmentId" ),    new ReflectionExtractor("getFamilyId" ), new ReflectionExtractor("getManufacturer" ),    new ReflectionExtractor("getBrand" ), new ReflectionExtractor("getSalesCompanyId" )}; MultiExtractor me = new MultiExtractor(ve); // Fill composite parameters.String SalesCompanyId = xxxx;...AndFilter composite = new AndFilter(new EqualsFilter(me,                   Arrays.asList(iSalesChannelId, iLevelId, iAreaId, iDepartmentId, iFamilyId, iManufacturer, iBrand, SalesCompanyId)),                                     new GreaterEqualsFilter(new ReflectionExtractor("getEndDate" ), iEndDate)); AndFilter finalFilter = new AndFilter(composite, new LessEqualsFilter(new ReflectionExtractor("getStartDate" ), iStartDate)); NamedCache globalDiscountsCache = CacheFactory.getCache(CacheConstants.GLOBAL_DISCOUNTS_CACHE_NAME); Set applicableDiscounts = globalDiscountsCache.entrySet(finalFilter);      Using this composite index the query improved dramatically and the execution time dropped to between 2 ms and  4 ms.  These execution times completely met the non-functional performance requirements . It should be noticed than when using the composite index the order of the attributes inside the ValueExtractor was not relevant.

  Read the article

• Nokia Windows Phone 8 App Collection

  - by Tim Murphy

  I recently upgraded to a Nokia Lumia 920.  Along with it came the availability of a number of Nokia developed apps or apps that Nokia has made available from other developers.  Below is a summary of some of the ones that I have used to this point.  There are quite a few of them so I won’t be covering everything that is available. Nokia Maps I am quite pleased with the accuracy of Nokia Maps and not having to tap the screen for each turn any more.  The information on the screen is quite good as well.  The couple of improvements I would like to see are for the voice directions to include which street or exit you need to use and improve the search accuracy.  Bing maps had much better search results in my opinion. Nokia Drive This one really had me confused when I first setup the phone.  I was driving down the road and suddenly I am getting notification tones, but there were no visual notifications on the phone.  It seems that in their infinite wisdom Nokia thinks I don’t know when I am going over the speed limit and need to be told. ESPN I really liked my ESPN app on Windows Phone 7.5, but I am not getting the type of experience I was looking for out of this app.  While it allows me to pick my favorite teams, but there isn’t a pivot page or panorama page that shows a summary of my favorite teams.  I have also found that the live tile don’t update very often.  Over all I am rather disappointed compared app produced by ESPN. Smart Shoot I really need to get the kids to let me use this on.  I like the concept, but I need to spend more time with it.  The idea how running the camera through a continuous shooting mode and then picking the best is something that I have done with my DSLR and am glad to see it available here. Cinemagraph Here is a fun filter.  It doesn’t have the most accurate editing features, but it is fun to stop certain parts of a scene and let other parts move.  As a test I stopped the traffic on the highway and let the traffic on the frontage road flow.  It makes for a fun effect.  If nothing else it could be great for sending prank animations to your friends. YouSendIt I have only briefly touched this application.  What I don’t understand is why it is needed.  Most of the functionality seems to be similar to SkyDrive and it gives you less storage.  They only feature that seems to differentiate the app is the signature capability. Creative Studio This app has some nice quick edits, but it is not very comprehensive.  I am also not to thrilled with the user experience.  It puts you though an initial color cast series that I’m not sure why it is there.  Discovery of the remaining adjustments isn’t that great.  In the end I found myself wanting Thumbia back. Panorama This is one of the apps that I like.  I found it easy to use as it guides you with a target circle that you center for it to take the next pictures.  It also stitches the images with amazing speed.  The one thing I wish it had was the capability to turn the phone into portrait orientation and do a taller panorama.  Perhaps we will see this in the future. Nokia Music After getting over the missing album art I found that there were a number of missing features with this app as well.  I have a Zune HD and I am used to being able to go through my collection and adding songs, albums or artists to my now playing.  There also doesn’t seem to be a way to manage playlists that I have seen yet.  Other than that the UI is familiar and it give Nokia City Lens Augmented reality is a cool concept, but I still haven’t seen it implemented in a compelling fashion beyond a demo at TED a couple of years ago.  The app still leaves me wanting as well.  It does give an interesting toy.  It gives you the ability to look for general categories and see general direction and clusters of locations.  I think as this concept is better thought out it will become more compelling. Nokia Trailers I don’t know how often I will use this app, but I do like being able to see what movies are being promoted.  I can’t wait for The Hobbit to come out and the trailer was just what the doctor ordered.  I can see coming back to this app from time to time. PhotoBeamer PhotoBeamer is a strange beast that needs a better instruction manual.  It seems a lot like magic but very confusing.  I need some more testing, but I don’t think this is something that most people are going to understand quickly and may give up before getting it to work.  I may put an update here after playing with it further. Ringtone Maker The app was just published and it didn’t work very well for me. It couldn’t find 95% of the songs that Nokia Music was playing for me and crashed several times.  It also had songs named wrong that when I checked them in Nokia Music they were fine.  This app looks like it has a long way to go. Summary In all I think that Nokia is offering a well rounded set of initial applications that can get any new owner started.  There is definitely room for improvement in all of these apps.  The main need is usability upgrades.  I would guess that with feedback from users they will come up to acceptable levels.  Try them out and see if you agree. del.icio.us Tags: Windows Phone,Nokia,Lumia,Nokia Apps,ESPN,PhotoBeamer,City Lens,YouSendIt,Drive,Maps

  Read the article

• What's new in EJB 3.2 ? - Java EE 7 chugging along!

  - by arungupta

  EJB 3.1 added a whole ton of features for simplicity and ease-of-use such as @Singleton, @Asynchronous, @Schedule, Portable JNDI name, EJBContainer.createEJBContainer, EJB 3.1 Lite, and many others. As part of Java EE 7, EJB 3.2 (JSR 345) is making progress and this blog will provide highlights from the work done so far. This release has been particularly kept small but include several minor improvements and tweaks for usability. More features in EJB.Lite Asynchronous session bean Non-persistent EJB Timer service This also means these features can be used in embeddable EJB container and there by improving testability of your application. Pruning - The following features were made Proposed Optional in Java EE 6 and are now made optional. EJB 2.1 and earlier Entity Bean Component Contract for CMP and BMP Client View of an EJB 2.1 and earlier Entity Bean EJB QL: Query Language for CMP Query Methods JAX-RPC-based Web Service Endpoints and Client View The optional features are moved to a separate document and as a result EJB specification is now split into Core and Optional documents. This allows the specification to be more readable and better organized. Updates and Improvements Transactional lifecycle callbacks in Stateful Session Beans, only for CMT. In EJB 3.1, the transaction context for lifecyle callback methods (@PostConstruct, @PreDestroy, @PostActivate, @PrePassivate) are defined as shown. @PostConstruct @PreDestroy @PrePassivate @PostActivate Stateless Unspecified Unspecified N/A N/A Stateful Unspecified Unspecified Unspecified Unspecified Singleton Bean's transaction management type Bean's transaction management type N/A N/A In EJB 3.2, stateful session bean lifecycle callback methods can opt-in to be transactional. These methods are then executed in a transaction context as shown. @PostConstruct @PreDestroy @PrePassivate @PostActivate Stateless Unspecified Unspecified N/A N/A Stateful Bean's transaction management type Bean's transaction management type Bean's transaction management type Bean's transaction management type Singleton Bean's transaction management type Bean's transaction management type N/A N/A For example, the following stateful session bean require a new transaction to be started for @PostConstruct and @PreDestroy lifecycle callback methods. @Statefulpublic class HelloBean {   @PersistenceContext(type=PersistenceContextType.EXTENDED)   private EntityManager em;    @TransactionAttribute(TransactionAttributeType.REQUIRES_NEW)   @PostConstruct   public void init() {        myEntity = em.find(...);   }   @TransactionAttribute(TransactionAttributeType.REQUIRES_NEW)    @PostConstruct    public void destroy() {        em.flush();    }} Notice, by default the lifecycle callback methods are not transactional for backwards compatibility. They need to be explicitly opt-in to be made transactional. Opt-out of passivation for stateful session bean - If your stateful session bean needs to stick around or it has non-serializable field then the bean can be opt-out of passivation as shown. @Stateful(passivationCapable=false)public class HelloBean {    private NonSerializableType ref = ... . . .} Simplified the rules to define all local/remote views of the bean. For example, if the bean is defined as: @Statelesspublic class Bean implements Foo, Bar {    . . .} where Foo and Bar have no annotations of their own, then Foo and Bar are exposed as local views of the bean. The bean may be explicitly marked @Local as @Local@Statelesspublic class Bean implements Foo, Bar {    . . .} then this is the same behavior as explained above, i.e. Foo and Bar are local views. If the bean is marked @Remote as: @Remote@Statelesspublic class Bean implements Foo, Bar {    . . .} then Foo and Bar are remote views. If an interface is marked @Local or @Remote then each interface need to be explicitly marked explicitly to be exposed as a view. For example: @Remotepublic interface Foo { . . . }@Statelesspublic class Bean implements Foo, Bar {    . . .} only exposes one remote interface Foo. Section 4.9.7 from the specification provide more details about this feature. TimerService.getAllTimers is a newly added convenience API that returns all timers in the same bean. This is only for displaying the list of timers as the timer can only be canceled by its owner. Removed restriction to obtain the current class loader, and allow to use java.io package. This is handy if you want to do file access within your beans. JMS 2.0 alignment - A standard list of activation-config properties is now defined destinationLookup connectionFactoryLookup clientId subscriptionName shareSubscriptions Tons of other clarifications through out the spec. Appendix A provide a comprehensive list of changes since EJB 3.1. ThreadContext in Singleton is guaranteed to be thread-safe. Embeddable container implement Autocloseable. A complete replay of Enterprise JavaBeans Today and Tomorrow from JavaOne 2012 can be seen here (click on CON4654_mp4_4654_001 in Media). The specification is still evolving so the actual property or method names or their actual behavior may be different from the currently proposed ones. Are there any improvements that you'd like to see in EJB 3.2 ? The EJB 3.2 Expert Group would love to hear your feedback. An Early Draft of the specification is available. The latest version of the specification can always be downloaded from here. Java EE 7 Specification Status EJB Specification Project JIRA of EJB Specification JSR Expert Group Discussion Archive These features will start showing up in GlassFish 4 Promoted Builds soon.

  Read the article

• Restructuring a large Chrome Extension/WebApp

  - by A.M.K

  I have a very complex Chrome Extension that has gotten too large to maintain in its current format. I'd like to restructure it, but I'm 15 and this is the first webapp or extension of it's type I've built so I have no idea how to do it. TL;DR: I have a large/complex webapp I'd like to restructure and I don't know how to do it. Should I follow my current restructure plan (below)? Does that sound like a good starting point, or is there a different approach that I'm missing? Should I not do any of the things I listed? While it isn't relevant to the question, the actual code is on Github and the extension is on the webstore. The basic structure is as follows: index.html <html> <head> <link href="css/style.css" rel="stylesheet" /> <!-- This holds the main app styles --> <link href="css/widgets.css" rel="stylesheet" /> <!-- And this one holds widget styles --> </head> <body class="unloaded"> <!-- Low-level base elements are "hardcoded" here, the unloaded class is used for transitions and is removed on load. i.e: --> <div class="tab-container" tabindex="-1"> <!-- Tab nav --> </div> <!-- Templates for all parts of the application and widgets are stored as elements here. I plan on changing these to <script> elements during the restructure since <template>'s need valid HTML. --> <template id="template.toolbar"> <!-- Template content --> </template> <!-- Templates end --> <!-- Plugins --> <script type="text/javascript" src="js/plugins.js"></script> <!-- This contains the code for all widgets, I plan on moving this online and downloading as necessary soon. --> <script type="text/javascript" src="js/widgets.js"></script> <!-- This contains the main application JS. --> <script type="text/javascript" src="js/script.js"></script> </body> </html> widgets.js (initLog || (window.initLog = [])).push([new Date().getTime(), "A log is kept during page load so performance can be analyzed and errors pinpointed"]); // Widgets are stored in an object and extended (with jQuery, but I'll probably switch to underscore if using Backbone) as necessary var Widgets = { 1: { // Widget ID, this is set here so widgets can be retreived by ID id: 1, // Widget ID again, this is used after the widget object is duplicated and detached size: 3, // Default size, medium in this case order: 1, // Order shown in "store" name: "Weather", // Widget name interval: 300000, // Refresh interval nicename: "weather", // HTML and JS safe widget name sizes: ["tiny", "small", "medium"], // Available widget sizes desc: "Short widget description", settings: [ { // Widget setting specifications stored as an array of objects. These are used to dynamically generate widget setting popups. type: "list", nicename: "location", label: "Location(s)", placeholder: "Enter a location and press Enter" } ], config: { // Widget settings as stored in the tabs object (see script.js for storage information) size: "medium", location: ["San Francisco, CA"] }, data: {}, // Cached widget data stored locally, this lets it work offline customFunc: function(cb) {}, // Widgets can optionally define custom functions in any part of their object refresh: function() {}, // This fetches data from the web and caches it locally in data, then calls render. It gets called after the page is loaded for faster loads render: function() {} // This renders the widget only using information from data, it's called on page load. } }; script.js (initLog || (window.initLog = [])).push([new Date().getTime(), "These are also at the end of every file"]); // Plugins, extends and globals go here. i.e. Number.prototype.pad = .... var iChrome = function(refresh) { // The main iChrome init, called with refresh when refreshing to not re-run libs iChrome.Status.log("Starting page generation"); // From now on iChrome.Status.log is defined, it's used in place of the initLog iChrome.CSS(); // Dynamically generate CSS based on settings iChrome.Tabs(); // This takes the tabs stored in the storage (see fetching below) and renders all columns and widgets as necessary iChrome.Status.log("Tabs rendered"); // These will be omitted further along in this excerpt, but they're used everywhere // Checks for justInstalled => show getting started are run here /* The main init runs the bare minimum required to display the page, this sets all non-visible or instantly need things (such as widget dragging) on a timeout */ iChrome.deferredTimeout = setTimeout(function() { iChrome.deferred(refresh); // Pass refresh along, see above }, 200); }; iChrome.deferred = function(refresh) {}; // This calls modules one after the next in the appropriate order to finish rendering the page iChrome.Search = function() {}; // Modules have a base init function and are camel-cased and capitalized iChrome.Search.submit = function(val) {}; // Methods within modules are camel-cased and not capitalized /* Extension storage is async and fetched at the beginning of plugins.js, it's then stored in a variable that iChrome.Storage processes. The fetcher checks to see if processStorage is defined, if it is it gets called, otherwise settings are left in iChromeConfig */ var processStorage = function() { iChrome.Storage(function() { iChrome.Templates(); // Templates are read from their elements and held in a cache iChrome(); // Init is called }); }; if (typeof iChromeConfig == "object") { processStorage(); } Objectives of the restructure Memory usage: Chrome apparently has a memory leak in extensions, they're trying to fix it but memory still keeps on getting increased every time the page is loaded. The app also uses a lot on its own. Code readability: At this point I can't follow what's being called in the code. While rewriting the code I plan on properly commenting everything. Module interdependence: Right now modules call each other a lot, AFAIK that's not good at all since any change you make to one module could affect countless others. Fault tolerance: There's very little fault tolerance or error handling right now. If a widget is causing the rest of the page to stop rendering the user should at least be able to remove it. Speed is currently not an issue and I'd like to keep it that way. How I think I should do it The restructure should be done using Backbone.js and events that call modules (i.e. on storage.loaded = init). Modules should each go in their own file, I'm thinking there should be a set of core files that all modules can rely on and call directly and everything else should be event based. Widget structure should be kept largely the same, but maybe they should also be split into their own files. AFAIK you can't load all templates in a folder, therefore they need to stay inline. Grunt should be used to merge all modules, plugins and widgets into one file. Templates should also all be precompiled. Question: Should I follow my current restructure plan? Does that sound like a good starting point, or is there a different approach that I'm missing? Should I not do any of the things I listed? Do applications written with Backbone tend to be more intensive (memory and speed) than ones written in Vanilla JS? Also, can I expect to improve this with a proper restructure or is my current code about as good as can be expected?

  Read the article

• ATI propriatery drivers install latest 12.8, broke my kernel. Stuck on kernel 3.2.0-26

  - by user66987

  I messed up a bit. Hoping some here can help me. I tried to install the newest catalyst 12.8. Sadly, this broke my system. I was stuck in low graphics mode. I finally managed to restore the proprietary drivers, and get into ubuntu again. But now I am stuck on kernel 3.2.0.26. I had installed kernel 3.2.0-30, but the system no longer sees it. I have kernel 3.2.0-29 too, but the system cannot see that as well. In the grub menu. When I use sudo update-grub, they are both listed. Here are the output I get: Searching for GRUB installation directory ... found: /boot/grub Cannot determine root device. Assuming /dev/hda1 This error is probably caused by an invalid /etc/fstab Searching for default file ... found: /boot/grub/default Testing for an existing GRUB menu.lst file ... found: /boot/grub/menu.lst Searching for splash image ... none found, skipping ... Found kernel: /boot/vmlinuz-3.2.0-30-generic Found kernel: /boot/vmlinuz-3.2.0-29-generic Found kernel: /boot/vmlinuz-3.2.0-27-generic Found kernel: /boot/vmlinuz-3.2.0-26-generic Found GRUB 2: /boot/grub/core.img Found kernel: /boot/memtest86+.bin Updating /boot/grub/menu.lst ... done I have searched everywhere to find a solution to my problem, but can't find any solutions. If you need any log outputs to figure out the problem, please let me know which ones. Update: here is the output for grub.cfg # # DO NOT EDIT THIS FILE # # It is automatically generated by grub-mkconfig using templates # from /etc/grub.d and settings from /etc/default/grub # ### BEGIN /etc/grub.d/00_header ### if [ -s $prefix/grubenv ]; then set have_grubenv=true load_env fi set default="0" if [ "${prev_saved_entry}" ]; then set saved_entry="${prev_saved_entry}" save_env saved_entry set prev_saved_entry= save_env prev_saved_entry set boot_once=true fi function savedefault { if [ -z "${boot_once}" ]; then saved_entry="${chosen}" save_env saved_entry fi } function recordfail { set recordfail=1 if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi } function load_video { insmod vbe insmod vga insmod video_bochs insmod video_cirrus } insmod part_msdos insmod ext2 set root='(hd2,msdos1)' search --no-floppy --fs-uuid --set=root 270c7c58-06d8-4e6b-b9bb-8d92f46adc0b if loadfont /usr/share/grub/unicode.pf2 ; then set gfxmode=auto load_video insmod gfxterm insmod part_msdos insmod ext2 set root='(hd2,msdos1)' search --no-floppy --fs-uuid --set=root 270c7c58-06d8-4e6b-b9bb-8d92f46adc0b set locale_dir=($root)/boot/grub/locale set lang=nb_NO insmod gettext fi terminal_output gfxterm if [ "${recordfail}" = 1 ]; then set timeout=-1 else set timeout=10 fi ### END /etc/grub.d/00_header ### ### BEGIN /etc/grub.d/05_debian_theme ### set menu_color_normal=white/black set menu_color_highlight=black/light-gray if background_color 44,0,30; then clear fi ### END /etc/grub.d/05_debian_theme ### ### BEGIN /etc/grub.d/10_linux ### function gfxmode { set gfxpayload="${1}" if [ "${1}" = "keep" ]; then set vt_handoff=vt.handoff=7 else set vt_handoff= fi } if [ "${recordfail}" != 1 ]; then if [ -e ${prefix}/gfxblacklist.txt ]; then if hwmatch ${prefix}/gfxblacklist.txt 3; then if [ ${match} = 0 ]; then set linux_gfx_mode=keep else set linux_gfx_mode=text fi else set linux_gfx_mode=text fi else set linux_gfx_mode=keep fi else set linux_gfx_mode=text fi export linux_gfx_mode if [ "${linux_gfx_mode}" != "text" ]; then load_video; fi menuentry 'Ubuntu, med Linux 3.2.0-26-generic' --class ubuntu --class gnu-linux --class gnu --class os { recordfail gfxmode $linux_gfx_mode insmod gzio insmod part_msdos insmod ext2 set root='(hd2,msdos1)' search --no-floppy --fs-uuid --set=root 270c7c58-06d8-4e6b-b9bb-8d92f46adc0b linux /boot/vmlinuz-3.2.0-26-generic root=UUID=270c7c58-06d8-4e6b-b9bb-8d92f46adc0b ro quiet splash $vt_handoff initrd /boot/initrd.img-3.2.0-26-generic } menuentry 'Ubuntu, med Linux 3.2.0-26-generic (gjenopprettelsesmodus)' --class ubuntu --class gnu-linux --class gnu --class os { recordfail insmod gzio insmod part_msdos insmod ext2 set root='(hd2,msdos1)' search --no-floppy --fs-uuid --set=root 270c7c58-06d8-4e6b-b9bb-8d92f46adc0b echo 'Laster Linux 3.2.0-26-generic ...' linux /boot/vmlinuz-3.2.0-26-generic root=UUID=270c7c58-06d8-4e6b-b9bb-8d92f46adc0b ro recovery nomodeset echo 'Loading initial ramdisk ...' initrd /boot/initrd.img-3.2.0-26-generic } submenu "Previous Linux versions" { menuentry 'Ubuntu, med Linux 3.2.0-25-generic' --class ubuntu --class gnu-linux --class gnu --class os { recordfail gfxmode $linux_gfx_mode insmod gzio insmod part_msdos insmod ext2 set root='(hd2,msdos1)' search --no-floppy --fs-uuid --set=root 270c7c58-06d8-4e6b-b9bb-8d92f46adc0b linux /boot/vmlinuz-3.2.0-25-generic root=UUID=270c7c58-06d8-4e6b-b9bb-8d92f46adc0b ro quiet splash $vt_handoff initrd /boot/initrd.img-3.2.0-25-generic } menuentry 'Ubuntu, med Linux 3.2.0-25-generic (gjenopprettelsesmodus)' --class ubuntu --class gnu-linux --class gnu --class os { recordfail insmod gzio insmod part_msdos insmod ext2 set root='(hd2,msdos1)' search --no-floppy --fs-uuid --set=root 270c7c58-06d8-4e6b-b9bb-8d92f46adc0b echo 'Laster Linux 3.2.0-25-generic ...' linux /boot/vmlinuz-3.2.0-25-generic root=UUID=270c7c58-06d8-4e6b-b9bb-8d92f46adc0b ro recovery nomodeset echo 'Loading initial ramdisk ...' initrd /boot/initrd.img-3.2.0-25-generic } menuentry 'Ubuntu, med Linux 3.2.0-24-generic' --class ubuntu --class gnu-linux --class gnu --class os { recordfail gfxmode $linux_gfx_mode insmod gzio insmod part_msdos insmod ext2 set root='(hd2,msdos1)' search --no-floppy --fs-uuid --set=root 270c7c58-06d8-4e6b-b9bb-8d92f46adc0b linux /boot/vmlinuz-3.2.0-24-generic root=UUID=270c7c58-06d8-4e6b-b9bb-8d92f46adc0b ro quiet splash $vt_handoff initrd /boot/initrd.img-3.2.0-24-generic } menuentry 'Ubuntu, med Linux 3.2.0-24-generic (gjenopprettelsesmodus)' --class ubuntu --class gnu-linux --class gnu --class os { recordfail insmod gzio insmod part_msdos insmod ext2 set root='(hd2,msdos1)' search --no-floppy --fs-uuid --set=root 270c7c58-06d8-4e6b-b9bb-8d92f46adc0b echo 'Laster Linux 3.2.0-24-generic ...' linux /boot/vmlinuz-3.2.0-24-generic root=UUID=270c7c58-06d8-4e6b-b9bb-8d92f46adc0b ro recovery nomodeset echo 'Loading initial ramdisk ...' initrd /boot/initrd.img-3.2.0-24-generic } menuentry 'Ubuntu, med Linux 3.2.0-23-generic' --class ubuntu --class gnu-linux --class gnu --class os { recordfail gfxmode $linux_gfx_mode insmod gzio insmod part_msdos insmod ext2 set root='(hd2,msdos1)' search --no-floppy --fs-uuid --set=root 270c7c58-06d8-4e6b-b9bb-8d92f46adc0b linux /boot/vmlinuz-3.2.0-23-generic root=UUID=270c7c58-06d8-4e6b-b9bb-8d92f46adc0b ro quiet splash $vt_handoff initrd /boot/initrd.img-3.2.0-23-generic } menuentry 'Ubuntu, med Linux 3.2.0-23-generic (gjenopprettelsesmodus)' --class ubuntu --class gnu-linux --class gnu --class os { recordfail insmod gzio insmod part_msdos insmod ext2 set root='(hd2,msdos1)' search --no-floppy --fs-uuid --set=root 270c7c58-06d8-4e6b-b9bb-8d92f46adc0b echo 'Laster Linux 3.2.0-23-generic ...' linux /boot/vmlinuz-3.2.0-23-generic root=UUID=270c7c58-06d8-4e6b-b9bb-8d92f46adc0b ro recovery nomodeset echo 'Loading initial ramdisk ...' initrd /boot/initrd.img-3.2.0-23-generic } } ### END /etc/grub.d/10_linux ### ### BEGIN /etc/grub.d/20_linux_xen ### ### END /etc/grub.d/20_linux_xen ### ### BEGIN /etc/grub.d/20_memtest86+ ### menuentry "Memory test (memtest86+)" { insmod part_msdos insmod ext2 set root='(hd2,msdos1)' search --no-floppy --fs-uuid --set=root 270c7c58-06d8-4e6b-b9bb-8d92f46adc0b linux16 /boot/memtest86+.bin } menuentry "Memory test (memtest86+, serial console 115200)" { insmod part_msdos insmod ext2 set root='(hd2,msdos1)' search --no-floppy --fs-uuid --set=root 270c7c58-06d8-4e6b-b9bb-8d92f46adc0b linux16 /boot/memtest86+.bin console=ttyS0,115200n8 } ### END /etc/grub.d/20_memtest86+ ### ### BEGIN /etc/grub.d/30_os-prober ### menuentry "Windows 7 (loader) (on /dev/sdb1)" --class windows --class os { insmod part_msdos insmod ntfs set root='(hd1,msdos1)' search --no-floppy --fs-uuid --set=root 448AF3CE8AF3BA8E chainloader +1 } ### END /etc/grub.d/30_os-prober ### ### BEGIN /etc/grub.d/40_custom ### # This file provides an easy way to add custom menu entries. Simply type the # menu entries you want to add after this comment. Be careful not to change # the 'exec tail' line above. ### END /etc/grub.d/40_custom ### ### BEGIN /etc/grub.d/41_custom ### if [ -f $prefix/custom.cfg ]; then source $prefix/custom.cfg; fi ### END /etc/grub.d/41_custom ### How can I set kernel 3.2.0.30 as the default kernel? According to this file, kernel 3.2.0-30 does not exist.

  Read the article

• How to decrypt an encrypted Apple iTunes iPhone backup?

  - by afit

  I've been asked by a number of unfortunate iPhone users to help them restore data from their iTunes backups. This is easy when they are unencrypted, but not when they are encrypted, whether or not the password is known. As such, I'm trying to figure out the encryption scheme used on mddata and mdinfo files when encrypted. I have no problems reading these files otherwise, and have built some robust C# libraries for doing so. (If you're able to help, I don't care which language you use. It's the principle I'm after here!) The Apple "iPhone OS Enterprise Deployment Guide" states that "Device backups can be stored in encrypted format by selecting the Encrypt iPhone Backup option in the device summary pane of iTunes. Files are encrypted using AES128 with a 256-bit key. The key is stored securely in the iPhone keychain." That's a pretty good clue, and there's some good info here on Stackoverflow on iPhone AES/Rijndael interoperability suggesting a keysize of 128 and CBC mode may be used. Aside from any other obfuscation, a key and initialisation vector (IV)/salt are required. One might assume that the key is a manipulation of the "backup password" that users are prompted to enter by iTunes and passed to "AppleMobileBackup.exe", padded in a fashion dictated by CBC. However, given the reference to the iPhone keychain, I wonder whether the "backup password" might not be used as a password on an X509 certificate or symmetric private key, and that the certificate or private key itself might be used as the key. (AES and the iTunes encrypt/decrypt process is symmetric.) The IV is another matter, and it could be a few things. Perhaps it's one of the keys hard-coded into iTunes, or into the devices themselves. Although Apple's comment above suggests the key is present on the device's keychain, I think this isn't that important. One can restore an encrypted backup to a different device, which suggests all information relevant to the decryption is present in the backup and iTunes configuration, and that anything solely on the device is irrelevant and replacable in this context. So where might be the key be? I've listed paths below from a Windows machine but it's much of a muchness whichever OS we use. The "\appdata\Roaming\Apple Computer\iTunes\itunesprefs.xml" contains a PList with a "Keychain" dict entry in it. The "\programdata\apple\Lockdown\09037027da8f4bdefdea97d706703ca034c88bab.plist" contains a PList with "DeviceCertificate", "HostCertificate", and "RootCertificate", all of which appear to be valid X509 certs. The same file also appears to contain asymmetric keys "RootPrivateKey" and "HostPrivateKey" (my reading suggests these might be PKCS #7-enveloped). Also, within each backup there are "AuthSignature" and "AuthData" values in the Manifest.plist file, although these appear to be rotated as each file gets incrementally backed up, suggested they're not that useful as a key, unless something really quite involved is being done. There's a lot of misleading stuff out there suggesting getting data from encrypted backups is easy. It's not, and to my knowledge it hasn't been done. Bypassing or disabling the backup encryption is another matter entirely, and is not what I'm looking to do. This isn't about hacking apart the iPhone or anything like that. All I'm after here is a means to extract data (photos, contacts, etc.) from encrypted iTunes backups as I can unencrypted ones. I've tried all sorts of permutations with the information I've put down above but got nowhere. I'd appreciate any thoughts or techniques I might have missed.

  Read the article

• Set the JAXB context factory initialization class to be used

  - by user1902288

  I have updated our projects (Java EE based running on Websphere 8.5) to use a new release of a company internal framework (and Ejb 3.x deployment descriptors rather than the 2.x ones). Since then my integration Tests fail with the following exception: [java.lang.ClassNotFoundException: com.ibm.xml.xlxp2.jaxb.JAXBContextFactory] I can build the application with the previous framework release and everything works fine. While debugging i noticed that within the ContextFinder (javax.xml.bind) there are two different behaviours: Previous Version (Everything works just fine): None of the different places brings up a factory class so the default factory class gets loaded which is com.sun.xml.internal.bind.v2.ContextFactory (defined as String constant within the class). Upgraded Version (ClassNotFound): There is a resource "META-INF/services/javax.xml.bind.JAXBContext" beeing loaded successfully and the first line read makes the ContextFinder attempt to load "com.ibm.xml.xlxp2.jaxb.JAXBContextFactory" which causes the error. I now have two questions: What sort is that resource? Because inside our EAR there is two WARs and none of those two contains a folder services in its META-INF directory. Where could that value be from otherwise? Because a filediff showed me no new or changed properties files. No need to say i am going to read all about the JAXB configuration possibilities but if you have first insights on what could have gone wrong or help me out with that resource (is it a real file i have to look for?) id appreciate a lot. Many Thanks! EDIT (according to comments Input/Questions): Out of curiosity, does your framework include JAXB JARs? Did the old version of your framework include jaxb.properties? Indeed (i am a bit surprised) the framework has a customized eclipselink-2.4.1-.jar inside the EAR that includes both a JAXB implementation and a jaxb.properties file that shows the following entry in both versions (the one that finds the factory as well as in the one that throws the exception): javax.xml.bind.context.factory=org.eclipse.persistence.jaxb.JAXBContextFactory I think this is has nothing to do with the current issue since the jar stayed exactly the same in both EARs (the one that runs/ the one with the expection) It's also not clear to me why the old version of the framework was ever selecting the com.sun implementation There is a class javax.xml.bind.ContextFinder which is responsible for initializing the JAXBContextFactory. This class searches various placess for the existance of a jaxb.properties file or a "javax.xml.bind.JAXBContext" resource. If ALL of those places dont show up which Context Factory to use there is a deault factory loaded which is hardcoded in the class itself: private static final String PLATFORM_DEFAULT_FACTORY_CLASS = "com.sun.xml.internal.bind.v2.ContextFactory"; Now back to my problem: Building with the previous version of the framework (and EJB 2.x deployment descriptors) everything works fine). While debugging i can see that there is no configuration found and thatfore above mentioned default factory is loaded. Building with the new version of the framework (and EJB 3.x deployment descriptors so i can deploy) ONLY A TESTCASE fails but the rest of the functionality works (like i can send requests to our webservice and they dont trigger any errors). While debugging i can see that there is a configuration found. This resource is named "META-INF/services/javax.xml.bind.JAXBContext". Here are the most important lines of how this resource leads to the attempt to load 'com.ibm.xml.xlxp2.jaxb.JAXBContextFactory' which then throws the ClassNotFoundException. This is simplified source of the mentioned javax.xml.bind.ContextFinder class: URL resourceURL = ClassLoader.getSystemResource("META-INF/services/javax.xml.bind.JAXBContext"); BufferedReader r = new BufferedReader(new InputStreamReader(resourceURL.openStream(), "UTF-8")); String factoryClassName = r.readLine().trim(); The field factoryClassName now has the value 'com.ibm.xml.xlxp2.jaxb.JAXBContextFactory' (The day i understand how to format source code on stackoverflow will be my biggest step ahead.... sorry for the formatting after 20 mins it still looks the same :() Because this has become a super lager question i will also add a bounty :)

  Read the article

• WCF timeouts are a nightmare

  - by Greg

  We have a bunch of WCF services that work almost all of the time, using various bindings, ports, max sizes, etc. The super-frustrating thing about WCF is that when it (rarely) fails, we are powerless to find out why it failed. Sometimes you will get a message that looks like this: System.ServiceModel.CommunicationException: The socket connection was aborted. This could be caused by an error processing your message or a receive timeout being exceeded by the remote host, or an underlying network resource issue. Local socket timeout was '01:00:00'. --- System.IO.IOException: Unable to read data from the transport connection: An existing connection was forcibly closed by the remote host. The problem is that the local socket timeout it's giving you is merely an attempt to be convenient. It may or may not be the cause of the problem. But OK, sometimes networks have issues. No big deal. We can retry or something. But here's the huge problem. On top of failing to tell you which precisely which timeout (if any) resulted in the failure ("your server-side receive timeout was exceeded," or something, would be helpful), WCF seems to have two types of timeouts. Timeout Type #1) A timeout, that, if increased, would increase the chance of your operation's success. So, the pertinent timeout is an hour, you are uploading a huge file that will take an hour and twenty minutes. It fails. You increase the timeout, it succeeds. I have no no problem with this type of timeout. Timeout Type #2) A timeout which merely defines how long you have to wait for the service to actually fail and give you an error, but modifying the value of this timeout has no impact on the chance of success. Basically, something happens during the first second of the service request which mucks things up. It will never recover. WCF doesn't magically retry the network connection for you. Fine, sometimes establishing a network connection doesn't go well. But, if your timeout is 2 hours, you have to wait 2 whole hours with no chance of it ever working before it finally acknowledges that it didn't work and gives you the error. But the error you see in both cases looks the same. With timeout Type #2, it still looks like you are running into a timeout. But, you could increase all of your timeouts to 4 years, and all it would do is make it take 4 years to get an error message. I know that Type #2 exists because I can do an operation that is known to complete in less than a minute when successful, and have it take 2 hours to fail. But, if I kill it and retry, it succeeds quickly. (If you are wondering why there might be a 2 hour timeout on an operation that takes less than a minute, there are times I run the operation with a much larger file and it could take over an hour.) So, to combat the problem with Type #2, you'd want your timeout to be really quick so you immediately know if there is a problem. Then you can retry. But the insurmountable problem is that because I don't know which timeouts are the cause of failure, I don't know what timeouts are Type #1 and which ones are Type #2. There may be one timeout (let's say the client-side send timeout) that acts like Type #1 in some cases and Type #2 in others. I have no idea, and I have no way of finding out. Does anyone know how to track down Type #2 timeouts so I can set them to low values without having to shorten actual (read: Type #1) timeouts and lower the chance of success? Thank you.

  Read the article

• I created a custom (WPF) DataGridBoundColumn and get unexpected behaviour, what am I missing?

  - by aspic

  Hi, I am using a DataGrid (from Microsoft.Windows.Controls.DataGrid) to display items on and on this DataGrid I use a custom Column which extends DataGridBoundColumn. I have bound an ObservableCollection to the ItemSource of the DataGrid. Conversation is one of my own custom datatypes which a (among other things) has a boolean called active. I bound this boolean to the DataGrid as follows: DataGridActiveImageColumn test = new DataGridActiveImageColumn(); test.Header = "Active"; Binding binding1 = new Binding("Active"); test.Binding = binding1; ConversationsDataGrid.Columns.Add(test); My custom DataGridBoundColumn DataGridActiveImageColumn overrides the GenerateElement method to let it return an Image depending on whether the conversation it is called for is active or not. The code for this is: namespace Microsoft.Windows.Controls { class DataGridActiveImageColumn : DataGridBoundColumn { protected override FrameworkElement GenerateElement(DataGridCell cell, object dataItem) { // Create Image Element Image myImage = new Image(); myImage.Width = 10; bool active=false; if (dataItem is Conversation) { Conversation c = (Conversation)dataItem; active = c.Active; } BitmapImage myBitmapImage = new BitmapImage(); // BitmapImage.UriSource must be in a BeginInit/EndInit block myBitmapImage.BeginInit(); if (active) { myBitmapImage.UriSource = new Uri(@"images\active.png", UriKind.Relative); } else { myBitmapImage.UriSource = new Uri(@"images\inactive.png", UriKind.Relative); } // To save significant application memory, set the DecodePixelWidth or // DecodePixelHeight of the BitmapImage value of the image source to the desired // height or width of the rendered image. If you don't do this, the application will // cache the image as though it were rendered as its normal size rather then just // the size that is displayed. // Note: In order to preserve aspect ratio, set DecodePixelWidth // or DecodePixelHeight but not both. myBitmapImage.DecodePixelWidth = 10; myBitmapImage.EndInit(); myImage.Source = myBitmapImage; return myImage; } protected override FrameworkElement GenerateEditingElement(DataGridCell cell, object dataItem) { throw new NotImplementedException(); } } } All this works as expected, and when during the running of the program the active boolean of conversations changes, this is automatically updated in the DataGrid. However: When there are more entries on the DataGrid then fit at any one time (and vertical scrollbars are added) the behavior with respect to the column for all the conversations is strange. The conversations that are initially loaded are correct, but when I use the scrollbar of the DataGrid conversations that enter the view seems to have a random status (although more inactive than active ones, which corresponds to the actual ratio). When I scroll back up, the active images of the Conversations initially shown (before scrolling) are not correct anymore as well. When I replace my custom DataGridBoundColumn class with (for instance) DataGridCheckBoxColumn it works as intended so my extension of the DataGridBoundColumn class must be incomplete. Personally I think it has something to do with the following: From the MSDN page on the GenerateElement method (http://msdn.microsoft.com/en-us/library/system.windows.controls.datagridcolumn.generateelement%28VS.95%29.aspx): Return Value Type: System.Windows. FrameworkElement A new, read-only element that is bound to the column's Binding property value. I do return a new element (the image) but it is not bound to anything. I am not quite sure what I should do. Should I bind the Image to something? To what exactly? And why? (I have been experimenting, but was unsuccessful thus far, hence this post) Thanks in advance.

  Read the article

• "Access is denied" JavaScript error when trying to access the document object of a programmatically-

  - by Bungle

  I have project in which I need to create an <iframe> element using JavaScript and append it to the DOM. After that, I need to insert some content into the <iframe>. It's a widget that will be embedded in third-party websites. I don't set the "src" attribute of the <iframe> since I don't want to load a page; rather, it is used to isolate/sandbox the content that I insert into it so that I don't run into CSS or JavaScript conflicts with the parent page. I'm using JSONP to load some HTML content from a server and insert it in this <iframe>. I have this working fine, with one serious exception - if the document.domain property is set in the parent page (which it may be in certain environments in which this widget is deployed), Internet Explorer (probably all versions, but I've confirmed in 6, 7, and 8) gives me an "Access is denied" error when I try to access the document object of this <iframe> I've created. It doesn't happen in any other browsers I've tested in (all major modern ones). This makes some sense, since I'm aware that Internet Explorer requires you to set the document.domain of all windows/frames that will communicate with each other to the same value. However, I'm not aware of any way to set this value on a document that I can't access. Is anyone aware of a way to do this - somehow set the document.domain property of this dynamically created <iframe>? Or am I not looking at it from the right angle - is there another way to achieve what I'm going for without running into this problem? I do need to use an <iframe> in any case, as the isolated/sandboxed window is crucial to the functionality of this widget. Here's my test code: <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Strict//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-strict.dtd"> <html xmlns="http://www.w3.org/1999/xhtml" xml:lang="en" lang="en"> <head> <meta http-equiv="Content-Type" content="text/html; charset=utf-8"/> <title>Document.domain Test</title> <script type="text/javascript"> document.domain = 'onespot.com'; // set the page's document.domain </script> </head> <body> <p>This is a paragraph above the &lt;iframe&gt;.</p> <div id="placeholder"></div> <p>This is a paragraph below the &lt;iframe&gt;.</p> <script type="text/javascript"> var iframe = document.createElement('iframe'), doc; // create <iframe> element document.getElementById('placeholder').appendChild(iframe); // append <iframe> element to the placeholder element setTimeout(function() { // set a timeout to give browsers a chance to recognize the <iframe> doc = iframe.contentWindow || iframe.contentDocument; // get a handle on the <iframe> document alert(doc); if (doc.document) { // HEREIN LIES THE PROBLEM doc = doc.document; } doc.body.innerHTML = '<h1>Hello!</h1>'; // add an element }, 10); </script> </body> </html> I've hosted it at: http://troy.onespot.com/static/access_denied.html As you'll see if you load this page in IE, at the point that I call alert(), I do have a handle on the window object of the <iframe>; I just can't get any deeper, into its document object. Thanks very much for any help or suggestions! I'll be indebted to whomever can help me find a solution to this.

  Read the article

• Facebook require_login() in iFrame App

  - by LapKom

  Hi, I have serious problem with iframe application. I need to use many external JS libraries and other dynamic stuuf so FMBL application can't be done. When I call require_login() I get applicaition installing dialog when app is not already installed, which is ok. But then after authorization application enters an endless redirect loop with parameters like auth_token, installed and so. Yesterday I managed to fix this, but today it's broken again... What the heck is happening with FB? It's driving me crazy to find a sollution, none of ones found on net doesn't seem to be working. So far I tried: http://abhirama.wordpress.com/2010/03/07/facebook-iframe-xfbml-app/ (7th march 2010!) http://forum.developers.facebook.com/viewtopic.php?pid=156092 http://www.keywordintellect.com/facebook-development/how-to-set-up-a-facebook-iframe-application-in-php-in-5-minutes/ http://www.markdeepwell.com/2010/02/validating-a-facebook-session-within-an-iframe/ http://forum.developers.facebook.com/viewtopic.php?pid=210449 http://www.ajaxlines.com/ajax/stuff/article/facebook_fbml_rendering_in_iframe_application.php http://www.aratide.com/php/solving-the-break-out-issue-in-iframe-facebook-applications/ None of the above worked... According to those and some FB docs: http://wiki.developers.facebook.com/index.php/FB_RequireFeatures http://wiki.developers.facebook.com/index.php/Cross_Domain_Communication_Channel My example test files look as follow: <?php //Link in library. require_once '../application/vendor/Facebook/facebook.php'; //Authentication Keys $appapikey = 'XXXX'; $appsecret = 'XXXX'; //Construct the class $facebook = new Facebook($appapikey, $appsecret); //Require login $user_id = $facebook->require_login(); ?> <html xmlns="http://www.w3.org/1999/xhtml" xmlns:fb="http://www.facebook.com/2008/fbml"> <head> <title></title> </head> <body> <script src="http://static.ak.facebook.com/js/api_lib/v0.4/FeatureLoader.js.php" type="text/javascript"></script> This is you: <fb:name uid="<?php echo $user_id?>"></fb:name> <?php var_dump($facebook->$this->facebook->api_client->friends_get())?> <script type="text/javascript"> FB_RequireFeatures(["XFBML"], function(){ FB.Facebook.init("<?=$appapikey?>", "xd_receiver.html"); }); </script> </body> </html> And cross-domain file xd_receiver.html is: <!doctype html public "-//w3c//dtd xhtml 1.0 strict//en" "http://www.w3.org/tr/xhtml1/dtd/xhtml1-strict.dtd"> <html xmlns="http://www.w3.org/1999/xhtml" > <head> <title>cross-domain receiver page</title> </head> <body> <script src="http://static.ak.facebook.com/js/api_lib/v0.4/XdCommReceiver.js" type="text/javascript"></script> </body> </html> How do I get it working? I'm using Kohana framework to do this and already replaced header('Location') with url::redirect() in facebook php library.

  Read the article

• Change TextView without completely re-drawing layout?

  - by twk

  I've found that updating a text view every second in my app burns a lot of CPU. The textview is in a horizontal LinearLayout, which is in turn inside of a vertical LinearLayout. Switching to a RelativeLayout (as recommended to increase perf) is not an option right now (I tried to get that working originally, but it was too complicated). The horizontal LinearLayout has 3 elements. The outer ones are TextViews with a layout_weight of 0, and the middle one is a progress bar with a layout_weight of 1 to make it expand to take up most of the space. I'm changing the contents of the leftmost TextView every second So, is there a way to change the contents of the text view without re-drawing everything? Or, can I force the TextViews to use a fixed amount of space to simplify the layout. Other tips for speeding up a LinearLayout are greatly appreciated as well. For reference, here is my entire layout. The field I'm updating is the timeIn one. <?xml version="1.0" encoding="utf-8"?> <RelativeLayout xmlns:android="http://schemas.android.com/apk/res/android" android:layout_width="wrap_content" android:layout_height="wrap_content"> <TextView android:text="Artist Name" android:id="@+id/curArtist" android:textSize="8pt" android:layout_width="fill_parent" android:layout_height="wrap_content" android:gravity="center_horizontal" android:paddingTop="5dp"></TextView> <TextView android:text="Song Name" android:id="@+id/curSong" android:textSize="10pt" android:textStyle="bold" android:layout_below="@id/curArtist" android:layout_width="fill_parent" android:layout_height="wrap_content" android:gravity="center_horizontal"></TextView> <TextView android:text="Album Name" android:id="@+id/curAlbum" android:textSize="8pt" android:layout_below="@id/curSong" android:layout_width="fill_parent" android:layout_height="wrap_content" android:gravity="center_horizontal"></TextView> <LinearLayout android:layout_width="fill_parent" android:layout_height="fill_parent" android:layout_below="@id/curAlbum" android:orientation="vertical"> <LinearLayout android:id="@+id/seekWrapper" android:layout_width="fill_parent" android:layout_height="wrap_content" android:minHeight="10dp" android:maxHeight="10dp" android:orientation="horizontal"> <TextView android:text="0:00" android:id="@+id/timeIn" android:textSize="4pt" android:paddingLeft="10dp" android:gravity="center_vertical" android:layout_weight="0" android:layout_gravity="left|center_vertical" android:layout_width="wrap_content" android:layout_height="fill_parent"></TextView> <ProgressBar android:layout_below="@id/curAlbum" android:id="@+id/progressBar" android:paddingLeft="7dp" android:paddingRight="7dp" android:layout_width="fill_parent" android:layout_height="fill_parent" android:maxHeight="10dp" android:minHeight="10dp" android:indeterminate="false" android:layout_weight="1" android:layout_gravity="center_horizontal|center_vertical" style="?android:attr/progressBarStyleHorizontal"></ProgressBar> <TextView android:text="0:00" android:id="@+id/timeLeft" android:paddingRight="10dp" android:textSize="4pt" android:layout_gravity="right|center_vertical" android:layout_weight="0" android:layout_width="wrap_content" android:layout_height="fill_parent"></TextView> </LinearLayout> <ImageView android:id="@+id/albumArt" android:layout_weight="1" android:padding="5dp" android:layout_width="fill_parent" android:layout_height="fill_parent" android:src="@drawable/blank_album_art"></ImageView> <LinearLayout android:layout_width="fill_parent" android:layout_height="wrap_content" android:orientation="horizontal" > <ImageButton android:id="@+id/prev" android:layout_width="wrap_content" android:layout_height="wrap_content" android:layout_gravity="left" android:src="@drawable/button_prev" android:paddingLeft="10dp" android:background="@null"></ImageButton> <ImageButton android:id="@+id/playPause" android:layout_width="wrap_content" android:layout_height="wrap_content" android:layout_gravity="center_horizontal" android:src="@drawable/button_play" android:layout_weight="1" android:background="@null"></ImageButton> <ImageButton android:id="@+id/next" android:layout_width="wrap_content" android:layout_height="wrap_content" android:src="@drawable/button_next" android:layout_gravity="right" android:paddingRight="10dp" android:background="@null"></ImageButton> </LinearLayout> </LinearLayout> </RelativeLayout>

  Read the article

• PHP pages working slow from time to time

  - by user1038179

  I have VPS with limit of 2GB of ram and 8 CPU cores. I have 5 sites on that VPS (one of them is just for testing, no visitors exept me). All 5 sites are image galleries, like wallpaper sites. Last week I noticed problem on one site (main domain, used for name servers, and also with most traffic, visitors). That site has two image galleries, one is old static html gallery made few years ago and another, main, is powered by ZENPhoto CMS. Also I have that same gallery CMS on another two sites on that same VPS (on one running site and on one just for testing site). On other two sites I have diferent PHP driven gallery. Problem is that after some time (it vary from 10 minutes to few hours after apache restart), loading of pages on main site becomes very slow, or I get 503 Service Temporarily Unavailable error. So pages becomes unavailable. But just that part with new CMS gallery, old part of site with static html pages are working fast and just fine. Also other two sites with same CMS gallery and other two with different PHP driven gallery are working fine and fast at the same time. I thought it must be something with CMS on that main site, because other sites are working nice. Then I tryed to open contact and guest book pages on that main site which are outside of that CMS but also PHP pages, and they do not load too, but that same contact php scipts are working on other sites at the same time. So, when site starts to hangs, ONLY PHP generated content is not working, like I said other static pages are working. And, ONLY on that one main site I have problems. Then I need to restart Apache, after restart everything is vorking nice and fast, for some time, than again, just PHP pages on main site are becomming slower. If I do not restart apache that slowness take some time (several minutes, hours, depending ot traffic) and during that time PHP diven content is loading very slow or unavailable on that site. After sime time, on moments everything start to work and is fast again for some time, and again. In hours with more traffic PHP content is loading slowly or it is unavailable, in hours with less traffic it is sometimes fast and sometimes little bit slower than usually. And ones again, only on that main site, and only PHP driven pages, static pages are working fast even in most traffic hours also other sites with even same CMS are working fast. Currently I have about 7000 unique visitors on that site but site worked nice even with 11500 visitors per day. And about 17000 in total visitors on VPS, all sites ( about 3 pages per unique visitor). When site start to slow down sometimes in apache status I can see something like this: mod_fcgid status: Total FastCGI processes: 37 Process: php5 (/usr/local/cpanel/cgi-sys/php5)Pid Active Idle Accesses State 11300 39 28 7 Working 11274 47 28 7 Working 11296 40 29 3 Working 11283 45 30 3 Working 11304 36 31 1 Working 11282 46 32 3 Working 11292 42 33 1 Working 11289 44 34 1 Working 11305 35 35 0 Working 11273 48 36 2 Working 11280 47 39 1 Working 10125 133 40 12 Exiting(communication error) 11294 41 41 1 Exiting(communication error) 11277 47 42 2 Exiting(communication error) 11291 43 43 1 Exiting(communication error) 10187 108 43 10 Exiting(communication error) 10209 95 44 7 Exiting(communication error) 10171 113 44 5 Exiting(communication error) 11275 47 47 1 Exiting(communication error) 10144 125 48 8 Exiting(communication error) 10086 149 48 20 Exiting(communication error) 10212 94 49 5 Exiting(communication error) 10158 118 49 5 Exiting(communication error) 10169 114 50 4 Exiting(communication error) 10105 141 50 16 Exiting(communication error) 10094 146 50 15 Exiting(communication error) 10115 139 51 17 Exiting(communication error) 10213 93 51 9 Exiting(communication error) 10197 103 51 7 Exiting(communication error) Process: php5 (/usr/local/cpanel/cgi-sys/php5)Pid Active Idle Accesses State 7983 1079 2 149 Ready 7979 1079 11 151 Ready Process: php5 (/usr/local/cpanel/cgi-sys/php5)Pid Active Idle Accesses State 7990 1066 0 57 Ready 8001 1031 64 35 Ready 7999 1032 94 29 Ready 8000 1031 91 36 Ready 8002 1029 34 52 Ready Process: php5 (/usr/local/cpanel/cgi-sys/php5)Pid Active Idle Accesses State 7991 1064 29 115 Ready When it is working nicly there is no lines with "Exiting(communication error)" Active and Idle are time active and time since last request, in seconds. Here are system info. Sysem info: Total processors: 8 Processor #1 Vendor GenuineIntel Name Intel(R) Xeon(R) CPU E5440 @ 2.83GHz Speed 88.320 MHz Cache 6144 KB All other seven are the same. System Information Linux vps.nnnnnnnnnnnnnnnnn.nnn 2.6.18-028stab099.3 #1 SMP Wed Mar 7 15:20:22 MSK 2012 x86_64 x86_64 x86_64 GNU/Linux Current Memory Usage total used free shared buffers cached Mem: 8388608 882164 7506444 0 0 0 -/+ buffers/cache: 882164 7506444 Swap: 0 0 0 Total: 8388608 882164 7506444 Current Disk Usage Filesystem Size Used Avail Use% Mounted on /dev/vzfs 100G 34G 67G 34% / none System Details: Running on: Apache/2.2.22 System info: (Unix) mod_ssl/2.2.22 OpenSSL/0.9.8e-fips-rhel5 DAV/2 mod_auth_passthrough/2.1 mod_bwlimited/1.4 FrontPage/5.0.2.2635 mod_fcgid/2.3.6 Powered by: PHP/5.3.10 Current Configuration Default PHP Version (.php files) 5 PHP 5 Handler fcgi PHP 4 Handler suphp Apache suEXEC on Apache Ruid2 off PHP 4 Handler suphp Apache suEXEC on Apache Configuration The following settings have been saved: fileetag: All keepalive: On keepalivetimeout: 3 maxclients: 150 maxkeepaliverequests: 10 maxrequestsperchild: 10000 maxspareservers: 10 minspareservers: 5 root_options: ExecCGI, FollowSymLinks, Includes, IncludesNOEXEC, Indexes, MultiViews, SymLinksIfOwnerMatch serverlimit: 256 serversignature: Off servertokens: Full sslciphersuite: ALL:!ADH:RC4+RSA:+HIGH:+MEDIUM:-LOW:-SSLv2:-EXP:!kEDH startservers: 5 timeout: 30 I hope, I explained my problem nicely. Any help would be nice.

  Read the article

• Linux IPTables / routing issue

  - by Jon

  Hi all, EDIT 1/3/10 22:00 GMT - rewrote some of it after further investigation It has been a while since I looked at IPtables and I seem to be worse than before as I can not seem to get my webserver online. Below is my firewall rules on the gateway server that is running the dhcp server accessing the net. The webserver is inside my network on a static IP (192.168.0.98, default port). When I use Nmap or GRC.com I see that port 80 is open on the gateway server but when I browse to it, (via public URL. http://www.houseofhawkins.com) it always fails with a connection error, (nmap cannot connect and figure out what the web server is either). I can nmap the webserver and browse to it just fine via same IP inside my network. I believe it is my IPTable rules that are not letting it through. Internally I can route all my requests. Each machine can browse to the website and traffic works just fine. I can MSTSC / ssh to all the webservers internally and they inturn can connect to the web. IPTABLE: *EDIT - Added new firewall rules 2/3/10 * #!/bin/sh iptables="/sbin/iptables" modprobe="/sbin/modprobe" depmod="/sbin/depmod" EXTIF="eth2" INTIF="eth1" load () { $depmod -a $modprobe ip_tables $modprobe ip_conntrack $modprobe ip_conntrack_ftp $modprobe ip_conntrack_irc $modprobe iptable_nat $modprobe ip_nat_ftp echo "enable forwarding.." echo "1" > /proc/sys/net/ipv4/ip_forward echo "enable dynamic addr" echo "1" > /proc/sys/net/ipv4/ip_dynaddr # start firewall # default policies $iptables -P INPUT DROP $iptables -F INPUT $iptables -P OUTPUT DROP $iptables -F OUTPUT $iptables -P FORWARD DROP $iptables -F FORWARD $iptables -t nat -F #echo " Opening loopback interface for socket based services." $iptables -A INPUT -i lo -j ACCEPT $iptables -A OUTPUT -o lo -j ACCEPT #echo " Allow all connections OUT and only existing and related ones IN" $iptables -A INPUT -i $INTIF -j ACCEPT $iptables -A INPUT -m state --state ESTABLISHED,RELATED -j ACCEPT $iptables -A OUTPUT -o $EXTIF -j ACCEPT $iptables -A OUTPUT -m state --state ESTABLISHED,RELATED -j ACCEPT $iptables -A FORWARD -i $EXTIF -o $INTIF -m state --state ESTABLISHED,RELATED -j ACCEPT $iptables -A FORWARD -i $INTIF -o $EXTIF -j ACCEPT $iptables -A FORWARD -j LOG --log-level 7 --log-prefix "Dropped by firewall: " $iptables -A INPUT -j LOG --log-level 7 --log-prefix "Dropped by firewall: " $iptables -A OUTPUT -j LOG --log-level 7 --log-prefix "Dropped by firewall: " #echo " Enabling SNAT (MASQUERADE) functionality on $EXTIF" $iptables -t nat -A POSTROUTING -o $EXTIF -j MASQUERADE $iptables -A INPUT -i $INTIF -j ACCEPT $iptables -A OUTPUT -o $INTIF -j ACCEPT #echo " Allowing packets with ICMP data (i.e. ping)." $iptables -A INPUT -p icmp -j ACCEPT $iptables -A OUTPUT -p icmp -j ACCEPT $iptables -A INPUT -p udp -i $INTIF --dport 67 -m state --state NEW -j ACCEPT #echo " Port 137 is for NetBIOS." $iptables -A INPUT -i $INTIF -p udp --dport 137 -j ACCEPT $iptables -A OUTPUT -o $INTIF -p udp --dport 137 -j ACCEPT #echo " Opening port 53 for DNS queries." $iptables -A INPUT -p udp -i $EXTIF --sport 53 -j ACCEPT #echo " opening Apache webserver" $iptables -A PREROUTING -t nat -i $EXTIF -p tcp --dport 80 -j DNAT --to 192.168.0.96:80 $iptables -A FORWARD -p tcp -m state --state NEW -d 192.168.0.96 --dport 80 -j ACCEPT } flush () { echo "flushing rules..." $iptables -P FORWARD ACCEPT $iptables -F INPUT $iptables -P INPUT ACCEPT echo "rules flushed" } case "$1" in start|restart) flush load ;; stop) flush ;; *) echo "usage: start|stop|restart." ;; esac exit 0 route info: Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 5e0412a6.bb.sky * 255.255.255.255 UH 0 0 0 eth2 192.168.0.0 * 255.255.255.0 U 0 0 0 eth1 default 5e0412a6.bb.sky 0.0.0.0 UG 100 0 0 eth2 ifconfig: eth1 Link encap:Ethernet HWaddr 00:22:b0:cf:4a:1c inet addr:192.168.0.1 Bcast:192.168.0.255 Mask:255.255.255.0 inet6 addr: fe80::222:b0ff:fecf:4a1c/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:79023 errors:0 dropped:0 overruns:0 frame:0 TX packets:57786 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:11580918 (11.5 MB) TX bytes:22872030 (22.8 MB) Interrupt:17 Base address:0x2b00 eth2 Link encap:Ethernet HWaddr 00:0c:f1:7c:45:5b inet addr:94.4.18.166 Bcast:94.4.18.166 Mask:255.255.255.255 inet6 addr: fe80::20c:f1ff:fe7c:455b/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:57038 errors:0 dropped:0 overruns:0 frame:0 TX packets:34532 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:21631721 (21.6 MB) TX bytes:7685444 (7.6 MB) lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:16 errors:0 dropped:0 overruns:0 frame:0 TX packets:16 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:1517 (1.5 KB) TX bytes:1517 (1.5 KB) EDIT OK so as requested I will try and expand on my infrastructure: I previously had it setup with a Sky broadband modem router that did the DHCP and I used its web interface to port forward the web across to the web server. The network looked something like this: I have now replaced the sky modem with a dlink modem which gives the IP to the gateway server that now does the DHCP. It looks like: The internet connection is a standard broadband connection with a dynamic IP, (use zoneedit.com to keep it updated). I have tried it on each of the webservers(one Ubuntu Apache server and one WS2008 IIS7). I think there must also be an issue with my IPTable rules as it can route to my win7 box which has the default IIS7 page and that would not display when I forwarded all port 80 to it. I would be really grateful for any and all help with this. Thanks Jon

  Read the article

• Multiple "pages" in GWT with human friendly URLs

  - by Andreas Borglin

  Hi. I'm playing with a GWT/GAE project which will have three different "pages", although it is not really pages in a GWT sense. The top views (one for each page) will have completely different layouts, but some of the widgets will be shared. One of the pages is the main page which is loaded by the default url (http://www.site.com), but the other two needs additional URL information to differentiate the page type. They also need a name parameter, (like http://www.site.com/project/project-name. There are at least two solutions to this that I'm aware of. Use GWT history mechanism and let page type and parameters (such as project name) be part of the history token. Use servlets with url-mapping patterns (like /project/*) The first choice might seem obvious at first, but it has several drawbacks. First, a user should be able to easily remember and type URL directly to a project. It is hard to produce a human friendly URL with history tokens. Second, I'm using gwt-presenter and this approach would mean that we need to support subplaces in one token, which I'd rather avoid. Third, a user will typically stay at one page, so it makes more sense that the page information is part of the "static" URL. Using servlets solves all these problems, but also creates other ones. So my first questions is, what is the best solution here? If I would go for the servlet solution, new questions pop up. It might make sense to split the GWT app into three separate modules, each with an entry point. Each servlet that is mapped to a certain page would then simply forward the request to the GWT module that handles that page. Since a user typically stays at one page, the browser only needs to load the js for that page. Based on what I've read, this solution is not really recommended. I could also stick with one module, but then GWT needs to find out which page it should display. It could either query the server or parse the URL itself. If I stick with one GWT module, I need to keep the page information stored on server side. Naturally I thought about sessions, but I'm not sure if its a good idea to mix page information with user data. A session usually lives between user login and logout, but in this case it would need different behavior. Would it be bad practise to handle this via sessions? The one GWT module + servlet solution also leads to another problem. If a user goes from a project page to the main page, how will GWT know that this has happened? The app will not be reloaded, so it will be treated as a simple state change. It seems rather ineffecient to have to check page info for every state change. Anyone care to guide me out of the foggy darkness that surrounds me? :-)

  Read the article

• Apache mod_rewrite driving me mad

  - by WishCow

  The scenario I have a webhost that is shared among multiple sites, the directory layout looks like this: siteA/ - css/ - js/ - index.php siteB/ - css/ - js/ - index.php siteC/ . . . The DocumentRoot is at the top level, so, to access siteA, you type http://webhost/siteA in your browser, to access siteB, you type http://webhost/siteB, and so on. Now I have to deploy my own site, which was designed with having 3 VirtualHosts in mind, so my structure looks like this: siteD/ - sites/sitename.com/ - log/ - htdocs/ - index.php - sites/static.sitename.com - log/ - htdocs/ - css - js - sites/admin.sitename.com - log/ - htdocs/ - index.php As you see, the problem is that my index.php files are not at the top level directory, unlike the already existing sites on the webhost. Each VirtualHost should point to the corresponding htdocs/ folder: http://siteD.com -> siteD/sites/sitename.com/htdocs http://static.siteD.com -> siteD/sites/static.sitename.com/htdocs http://admin.siteD.com -> siteD/sites/admin.sitename.com/htdocs The problem I cannot have VirtualHosts on this host, so I have to emulate it somehow, possibly with mod_rewrite. The idea Have some predefined parts in all of the links on the site, that I can identify, and route accordingly to the correct file, with mod_rewrite. Examples: http://webhost/siteD/static/js/something.js -> siteD/sites/static.sitename.com/htdocs/js/something.js http://webhost/siteD/static/css/something.css -> siteD/sites/static.sitename.com/htdocs/css/something.css http://webhost/siteD/admin/something -> siteD/sites/admin.sitename.com/htdocs/index.php http://webhost/siteD/admin/sub/something -> siteD/sites/admin.sitename.com/htdocs/index.php http://webhost/siteD/something -> siteD/sites/sitename.com/htdocs/index.php http://webhost/siteD/sub/something -> siteD/sites/sitename.com/htdocs/index.php Anything that starts with http://url/sitename/admin/(.*) will get rewritten, to point to siteD/sites/admin.sitename.com/htdocs/index.php Anything that starts with http://url/sitename/static/(.*) will get rewritten, to point to siteD/sites/static.sitename.com/htdocs/$1 Anything that starts with http://url/sitename/(.*) AND did not have a match already from above, will get rewritten to point to siteD/sites/sitename.com/htdocs/index.php The solution Here is the .htaccess file that I've come up with: RewriteEngine On RewriteBase / RewriteCond %{REQUEST_URI} ^/siteD/static/(.*)$ [NC] RewriteRule ^siteD/static/(.*)$ siteD/sites/static/htdocs/$1 [L] RewriteCond %{REQUEST_URI} ^/siteD/admin/(.*)$ [NC] RewriteRule ^siteD/(.*)$ siteD/sites/admin/htdocs/index.php [L,QSA] So far, so good. It's all working. Now to add the last rule: RewriteCond %{REQUEST_URI} ^/siteD/(.*)$ [NC] RewriteRule ^siteD/(.*)$ siteD/sites/public/htdocs/index.php [L,QSA] And it's broken. The last rule catches everything, even the ones that have static/ or admin/ in them. Why? Shouldn't the [L] flag stop the rewriting process in the first two cases? Why is the third case evaluated? Is there a better way of solving this? I'm not sticking to rewritemod, anything is fine as long as it does not need access to server-level config. I don't have access to RewriteLog, or anything like that. Please help :(

  Read the article

• LDAP query on linux against AD returns groups with no members

  - by SethG

  I am using LDAP+kerberos to authenticate against Active Directory on Windows 2003 R2. My krb5.conf and ldap.conf appear to be correct (according to pretty much every sample I found on the 'net). I can login to the host with both password and ssh keys. When I run getent passwd, all my ldap user accounts are listed with all the important attributes. When I run getent group, all the ldap groups and their gid's are listed, but no group members. If I run ldapsearch and filter on any group, the members are all listed with the "member" attribute. So the data is there for the taking, it's just not being parsed properly. It would appear that I simply am using an incorrect mapping in ldap.conf, but I can't see it. I've tried several variations and all give the same result. Here is my current ldap.conf: host <ad-host1-ip> <ad-host2-ip> base dc=my,dc=full,dc=dn uri ldap://<ad-host1> ldap://<ad-host2> ldap_version 3 binddn <mybinddn> bindpw <mybindpw> scope sub bind_policy hard nss_reconnect_tries 3 nss_reconnect_sleeptime 1 nss_reconnect_maxsleeptime 8 nss_reconnect_maxconntries 3 nss_map_objectclass posixAccount User nss_map_objectclass posixGroup Group nss_map_attribute uid sAMAccountName nss_map_attribute gidNumber msSFU30GidNumber nss_map_attribute uidNumber msSFU30UidNumber nss_map_attribute cn cn nss_map_attribute gecos displayName nss_map_attribute homeDirectory msSFU30HomeDirectory nss_map_attribute loginShell msSFU30LoginShell nss_map_attribute uniqueMember member pam_filter objectcategory=User pam_login_attribute sAMAccountName pam_member_attribute member pam_password ad Here's the kicker: this config works 100% fine on a different linux box with a different distro. It does not work on the distro I am planning on switching to. I have installed from source the versions of pam_ldap and nss_ldap on the new box to match the old box, which fixed another problem I was having with this setup. Other relevant info is the original AD box was Windows 2003. It's mirror died a horrible hardware death so I'm trying to add two more 2003-R2 servers to the mirror tree and ultimately drop the old 2003 box. The new R2 boxes appear to have joined the DC forest properly. What do I need to do to get groups working? I've exhausted all the resources I could find and need a different angle. Any input is appreciated. Status update, 7/31/09 I have managed to tweak my config file to get full info from the AD and performance is nice and snappy. I replaced the back-rev'd copies of pam_ldap and nss_ldap with the current ones for the distro I'm using, so it's back to a standard out-of-the-box install. Here's my current config: host <ad-host1-ip> <ad-host2-ip> base dc=my,dc=full,dc=dn uri ldap://<ad-host1> ldap://<ad-host2> ldap_version 3 binddn <mybinddn> bindpw <mybindpw> scope sub bind_policy soft nss_reconnect_tries 3 nss_reconnect_sleeptime 1 nss_reconnect_maxsleeptime 8 nss_reconnect_maxconntries 3 nss_connect_policy oneshot referrals no nss_map_objectclass posixAccount User nss_map_objectclass posixGroup Group nss_map_attribute uid sAMAccountName nss_map_attribute gidNumber msSFU30GidNumber nss_map_attribute uidNumber msSFU30UidNumber nss_map_attribute cn cn nss_map_attribute gecos displayName nss_map_attribute homeDirectory msSFU30HomeDirectory nss_map_attribute loginShell msSFU30LoginShell nss_map_attribute uniqueMember member pam_filter objectcategory=CN=Person,CN=Schema,CN=Configuration,DC=w2k,DC=cis,DC=ksu,DC=edu pam_login_attribute sAMAccountName pam_member_attribute member pam_password ad ssl off tls_checkpeer no sasl_secprops maxssf=0 The remaining problem now is when you run the groups command, not all subscribed groups are listed. Some are (one or two), but not all. Group memberships are still honored, such as file and printer access. getent group foo still shows that the user is a member of group foo. So it appears to be a presentation bug, and does not interfere with normal operation. It also appears that some (I have not determined exactly how many) group searches do not resolve correctly, even though the group is listed. eg, when you run "getent group bar", nothing is returned, but if you run "getent group|grep bar" or "getent group|grep <bar_gid>" you can see that it indeed listed and your group name and gid are correct. This still seems like an LDAP search or mapping error, but I can't figure out what it is. I'm a heckuva lot closer than earlier in the week, but I'd really like to get this last detail ironed out.

  Read the article

• Oracle performance problem

  - by jreid42

  We are using an Oracle 11G machine that is very powerful; has redundant storage etc. It's a beast from what I have been told. We just got this DB for a tool that when I first came on as a coop had like 20 people using, now its upwards of 150 people. I am the only one working on it :( We currently have a system in place that distributes PERL scripts across our entire data center essentially giving us a sort of "grid" computing power. The Perl scripts run a sort of simulation and report back the results to the database. They do selects / inserts. The load is not very high for each script but it could be happening across 20-50 systems at the same time. We then have multiple data centers and users all hitting the same database with this same approach. Our main problem with this is that our database is getting overloaded with connections and having to drop some. We sometimes have upwards of 500 connections. These are old perl scripts and they do not handle this well. Essentially they fail and the results are lost. I would rather avoid having to rewrite a lot of these as they are poorly written, and are a headache to even look at. The database itself is not overloaded, just the connection overhead is too high. We open a connection, make a quick query and then drop the connection. Very short connections but many of them. The database team has basically said we need to lower the number of connections or they are going to ignore us. Because this is distributed across our farm we cant implement persistent connections. I do this with our webserver; but its on a fixed system. The other ones are perl scripts that get opened and closed by the distribution tool and thus arent always running. What would be my best approach to resolving this issue? The scripts themselves can wait for a connection to be open. They do not need to act immediately. Some sort of queing system? I've been suggested to set up a few instances of a tool called "SQL Relay". Maybe one in each data center. How reliable is this tool? How good is this approach? Would it work for what we need? We could have one for each data center and relay requests through it to our main database, keeping a pipeline of open persistent connections? Does this make sense? Is there any other suggestions you can make? Any ideas? Any help would be greatly appreciated. Sadly I am just a coop student working for a very big company and somehow all of this has landed all on my shoulders (there is literally nobody to ask for help; its a hardware company, everybody is hardware engineers, and the database team is useless and in India) and I am quite lost as what the best approach would be? I am extremely overworked and this problem is interfering with on going progress and basically needs to be resolved as quickly as possible; preferably without rewriting the whole system, purchasing hardware (not gonna happen), or shooting myself in the foot. HELP LOL!

  Read the article

• Three ways to upload/post/convert iMovie to YouTube

  - by user44251

  For Mac users, iMovie is probably a convenient tool for making, editing their own home movies so as to upload to YouTube for sharing with more people. However, uploading iMovie files to YouTube can't be always a smooth run, I did notice many people complaining about it. This article is delivered for guiding those who are haunted by the nightmare by providing three common ways to upload iMovie files to YouTube. YouTube and iMovie YouTube is the most popular video sharing website for users to upload, share and view videos. It empowers anyone with an Internet connection the ability to upload video clips and share them with friends, family and the world. Users are invited to leave comments, pick favourites, send messages to each other and watch videos sorted into subjects and channels. YouTube accepts videos uploaded in most container formats, including WMV (Windows Media Video), 3GP (Cell Phones), AVI (Windows), MOV (Mac), MP4 (iPod/PSP), FLV (Adobe Flash), MKV (H.264). These include video codecs such as MP4, MPEG and WMV. iMovie is a common video editing software application comes with every Mac for users to edit their own home movies. It imports video footage to the Mac using either the Firewire interface on most MiniDV format digital video cameras, the USB port, or by importing the files from a hard drive where users can edit the video clips, add titles, and add music. Since 1999, eight versions of iMovie have been released by Apple, each with its own functions and characteristic, and each of them deal with videos in a way more or less different. But the most common formats handled with iMovie if specialty discarded as far as to my research are MOV, DV, HDV, MPEG-4. Three ways for successful upload iMovie files to YouTube Solution one and solution two suitable for those who are 100 certainty with their iMovie files which are fully compatible with YouTube. For smooth uploading, you are required to get a YouTube account first. Solution 1: Directly upload iMovie to YouTube Step 1: Launch iMovie, select the project you want to upload in YouTube. Step 2: Go to the file menu, click Share, select Export Movie Step 3: Specify the output file name and directory and then type the video type and video size. Solution 2: Post iMovie to YouTube straightly Step 1: Launch iMovie, choose the project you want to post in YouTube Step 2: From the Share menu, choose YouTube Step 3: In the pop-up YouTube windows, specify the name of your YouTube account, the password, choose the Category and fill in the description and tags of the project. Tick Make this movie more private on the bottom of the window, if possible, to limit those who can view the project. Click Next, and then click Publish. iMovie will automatically export and upload the movie to YouTube. Step 4: Click Tell a Friend to email friends and your family about your film. You are also allowed to copy the URL from Tell a Friend window and paste it into an email you created in your favourite email application if you like. Anyone you send to email to will be able to follow the URL directly to your movie. Note: Videos uploaded to YouTube are limited to ten minutes in length and a file size of 2GB. Solution 3: Upload to iMovie after conversion If neither of the above mentioned method works, there is still a third way to turn to. Sometimes, your iMovie files may not be recognized by YouTube due to the versions of iMovie (settings and functions may varies among versions), video itself (video format difference because of file extension, resolution, video size and length), compatibility (videos that are completely incompatible with YouTube). In this circumstance, the best and reliable method is to convert your iMovie files to YouTube accepted files, iMovie to YouTube converter will be inevitably the ideal choice. iMovie to YouTube converter is an elaborately designed tool for convert iMovie files to YouTube workable WMV, 3GP, AVI, MOV, MP4, FLV, MKV for smooth uploading with hard-to-believe conversion speed and second to none output quality. It can also convert between almost all popular popular file formats like AVI, WMV, MPG, MOV, VOB, DV, MP4, FLV, 3GP, RM, ASF, SWF, MP3, AAC, AC3, AIFF, AMR, WAV, WMA etc so as to put on various portable devices, import to video editing software or play on vast amount video players. iMovie to YouTube converter can also served as an excellent video editing tool to meet your specific program requirements. For example, you can cut your video files to a certain length, or split your video files to smaller ones and select the proper resolution suitable for demands of YouTube by Clip or Settings separately. Crop allows you to cut off unwanted black edges from your videos. Besides, you can also have a good command of the whole process or snapshot your favourite pictures from the preview window. More can be expected if you have a try.

  Read the article

• Diagramming Software for a Developer/Designer

  - by Craig Walker

  For a long time I've been looking for a good diagramming/vector-based drawing program that meets my needs as a developer. I'd like to: Draw database diagrams Draw flow charts Draw object-modeling diagrams (UML being the standard) Draw other free-form diagrams (basically boxes & arrows with the occasional clipart) Draw mockups of user interfaces and web pages EDIT: I want good-looking electronic-format diagrams that I can show to 3rd parties, not just something for my own internal use. EDIT 2: I'm also looking for Windows software, although I'm toying with the idea of switching to Mac, so a really good Mac-only product might get me to switch. Basically I need a good vector graphic program (with decent grouping, connecting lines, and ideally auto-routing). I'd prefer a diagramming tool that can also be used for drawing (for the UI mockups) rather than a drawing tool that can also be used for diagrams. I've tried Visio on several occasions, and every time I've been disappointed. The interface always seems to get in my way at some point. It's pretty close to what I want, and the latest version (I got the trail from MS) seems to be better than previous ones in terms of usability, but I really don't want to plunk down that sort of cash for a mediocre product. I've tried Dia and Inkscape, and while initially promising and with the right price tag, I found both of them to be lacking in several ways (including some recurring bugs). I've toyed with getting Adobe Illustrator, but I've never used it before, and I have a feeling that it wouldn't handle the diagramming aspect very well, and I don't want to buy a copy just to find out it doesn't meet my needs. So far, the product that I've had the most success with is, sadly, OpenOffice Draw. It's free of course (which lowers my expectations and thus improves my view of it) and its usability is pretty good, but in the end I'd like something more suited to diagramming. I'm willing to spend real money (in the $500-$1K range) for a really good piece of software if it does everything I want it to. The front runner is of course Visio but I'm hoping for more. Does anybody have any recommendations? CONCLUSION: @dlamblin had the most informative post, but the part I gained the most from was his/her (and others) mention of OmniGraffle, not Gliffy. I gave Gliffy a try, and it seemed neet for occational use, but since it's a Flash app (note: not AJAX as dlamblin mentioned) it's still a bit of a pain to use (no keyboard shortcuts for copy/paste was pretty much a deal breaker for me). I also tried SmartDraw, but it had 3-strikes-you're-out against it: The trial period was only 7 days long. It used some nonstandard (and visually jarring) GUI widget toolkit for its UI. At the very least it makes me suspicious (how do I know it will actually work & support the standard Windows features?) It crashed on me early into my trial. OmniGraffle looks like exactly what I want... except that it's Mac-only (so I couldn't give it a try). However, it got good reviews from my Mac-owning coworker, and I hope to try it on a friend's Mac soon. If it's good enough then I might spring for a new MacBook.

  Read the article

• Safe, standard way to load images in ListView on a different thread?

  - by Po

  Before making this question, I have searched and read these ones: http://stackoverflow.com/questions/541966/android-how-do-i-do-a-lazy-load-of-images-in-listview http://stackoverflow.com/questions/1409623/android-issue-with-lazy-loading-images-into-a-listview My problem is I have a ListView, where: Each row contains an ImageView, whose content is to be loaded from the internet Each row's view is recycled as in ApiDemo's List14 What I want ultimately: Load images lazily, only when the user scrolls to them Load images on different thread(s) to maintain responsiveness My current approach: In the adapter's getView() method, apart from setting up other child views, I launch a new thread that loads the Bitmap from the internet. When that loading thread finishes, it returns the Bitmap to be set on the ImageView (I do this using AsyncTask or Handler). Because I recycle ImageViews, it may be the case that I first want to set a view with Bitmap#1, then later want to set it to Bitmap#2 when the user scrolls down. Bitmap#1 may happen to take longer than Bitmap#2 to load, so it may end up overwriting Bitmap#2 on the view. I solve this by maintaining a WeakHashMap that remembers the last Bitmap I want to set for that view. Below is somewhat a pseudocode for my current approach. I've ommitted other details like caching, just to keep the thing clear. public class ImageLoader { // keeps track of the last Bitmap we want to set for this ImageView private static final WeakHashMap<ImageView, AsyncTask> assignments = new WeakHashMap<ImageView, AsyncTask>(); /** Asynchronously sets an ImageView to some Bitmap loaded from the internet */ public static void setImageAsync(final ImageView imageView, final String imageUrl) { // cancel whatever previous task AsyncTask oldTask = assignments.get(imageView); if (oldTask != null) { oldTask.cancel(true); } // prepare to launch a new task to load this new image AsyncTask<String, Integer, Bitmap> newTask = new AsyncTask<String, Integer, Bitmap>() { protected void onPreExecute() { // set ImageView to some "loading..." image } protected Bitmap doInBackground(String... urls) { return loadFromInternet(imageUrl); } protected void onPostExecute(Bitmap bitmap) { // set Bitmap if successfully loaded, or an "error" image if (bitmap != null) { imageView.setImageBitmap(bitmap); } else { imageView.setImageResource(R.drawable.error); } } }; newTask.execute(); // mark this as the latest Bitmap we want to set for this ImageView assignments.put(imageView, newTask); } /** returns (Bitmap on success | null on error) */ private Bitmap loadFromInternet(String imageUrl) {} } Problem I still have: what if the Activity gets destroyed while some images are still loading? Is there any risk when the loading thread calls back to the ImageView later, when the Activity is already destroyed? Moreover, AsyncTask has some global thread-pool underneath, so if lengthy tasks are not canceled when they're not needed anymore, I may end up wasting time loading things users don't see. My current design of keeping this thing globally is too ugly, and may eventually cause some leaks that are beyond my understanding. Instead of making ImageLoader a singleton like this, I'm thinking of actually creating separate ImageLoader objects for different Activities, then when an Activity gets destroyed, all its AsyncTask will be canceled. Is this too awkward? Anyway, I wonder if there is a safe and standard way of doing this in Android. In addition, I don't know iPhone but is there a similar problem there and do they have a standard way to do this kind of task? Many thanks.

  Read the article

• How can I anchor a textbox in wpf ?

  - by csuporj

  I have a window with tabs. On one of the tabs, I have a layout like below. (In fact it is more complicated, I have 4 text boxes in a row, and I have more rows.) How can I make the 3rd textbox have the width of the label + the width of the text box above, that is, to have them properly aligned ? The problem is that WPF widens the 3rd textbox, when I type text into it. Using hardcoded numbers for the sizes defeats the whole purpose of WPF. I could do that way 10 times faster in Windows Forms than in WPF. Is there a better way, than using a grid for each set of consecutive small text boxes, having to skip the large ones from the grid, because putting them in messes up everything. <Window x:Class="WpfApplication1.MainWindow" xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation" xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml" Title="MainWindow" Height="350" Width="525"> <Window.Resources> <Style TargetType="{x:Type Label}"> <Setter Property="VerticalAlignment" Value="Center"/> </Style> <Style TargetType="{x:Type TextBox}"> <Setter Property="VerticalAlignment" Value="Center"/> <Setter Property="Margin" Value="3"/> </Style> <Style x:Key="SmallTextBox" TargetType="{x:Type TextBox}" BasedOn="{StaticResource {x:Type TextBox}}"> <Setter Property="Width" Value="50"/> </Style> </Window.Resources> <StackPanel VerticalAlignment="Top" HorizontalAlignment="Left" Width="{Binding ElementName=grid,Path=ActualWidth}" Grid.IsSharedSizeScope="True"> <Grid Name="grid" HorizontalAlignment="Left"> <Grid.ColumnDefinitions> <ColumnDefinition Width="Auto" SharedSizeGroup="c1"/> <ColumnDefinition Width="Auto" SharedSizeGroup="c2"/> </Grid.ColumnDefinitions> <Grid.RowDefinitions> <RowDefinition Height="Auto"/> <RowDefinition Height="Auto"/> </Grid.RowDefinitions> <Label Content="Foo:"/> <TextBox Grid.Column="1" Style="{StaticResource SmallTextBox}"/> <Label Grid.Row="1" Content="Foobar:"/> <TextBox Grid.Row="1" Grid.Column="1" Style="{StaticResource SmallTextBox}"/> </Grid> <TextBox Grid.Row="1"/> <Grid Name="grid2" HorizontalAlignment="Left"> <Grid.ColumnDefinitions> <ColumnDefinition Width="Auto" SharedSizeGroup="c1"/> <ColumnDefinition Width="Auto" SharedSizeGroup="c2"/> </Grid.ColumnDefinitions> <Label Content="Bar:"/> <TextBox Grid.Column="1" Style="{StaticResource SmallTextBox}"/> </Grid> </StackPanel> </Window>

  Read the article

• Is the Cloud ready for an Enterprise Java web application? Seeking a JEE hosting advice.

  - by Jakub Holý

  Greetings to all the smart people around here! I'd like to ask whether it is feasible or a good idea at all to deploy a Java enterprise web application to a Cloud such as Amazon EC2. More exactly, I'm looking for infrastructure options for an application that shall handle few hundred users with long but neither CPU nor memory intensive sessions. I'm considering dedicated servers, virtual private servers (VPSs) and EC2. I've noticed that there is a project called JBoss Cloud so people are working on enabling such a deployment, on the other hand it doesn't seem to be mature yet and I'm not sure that the cloud is ready for this kind of applications, which differs from the typical cloud-based applications like Twitter. Would you recommend to deploy it to the cloud? What are the pros and cons? The application is a Java EE 5 web application whose main function is to enable users to compose their own customized Product by combining the available Parts. It uses stateless and stateful session beans and JPA for persistence of entities to a RDBMS and fetches information about Parts from the company's inventory system via a web service. Aside of external users it's used also by few internal ones, who are authenticated against the company's LDAP. The application should handle around 300-400 concurrent users building their product and should be reasonably scalable and available though these qualities are only of a medium importance at this stage. I've proposed an architecture consisting of a firewall (FW) and load balancer supporting sticky sessions and https (in the Cloud this would be replaced with EC2's Elastic Load Balancing service and FW on the app. servers, in a physical architecture the load-balancer would be a HW), then two physical clustered application servers combined with web servers (so that if one fails, a user doesn't loose his/her long built product) and finally a database server. The DB server would need a slave backup instance that can replace the master instance if it fails. This should provide reasonable availability and fault tolerance and provide good scalability as long as a single RDBMS can keep with the load, which should be OK for quite a while because most of the operations are done in the memory using a stateful bean and only occasionally stored or retrieved from the DB and the amount of data is low too. A problematic part could be the dependency on the remote inventory system webservice but with good caching of its outputs in the application it should be OK too. Unfortunately I've only vague idea of the system resources (memory size, number and speed of CPUs/cores) that such an "average Java EE application" for few hundred users needs. My rough and mostly unfounded estimate based on actual Amazon offerings is that 1.7GB and a single, 2-core "modern CPU" with speed around 2.5GHz (the High-CPU Medium Instance) should be sufficient for any of the two application servers (since we can handle higher load by provisioning more of them). Alternatively I would consider using the Large instance (64b, 7.5GB RAM, 2 cores at 1GHz) So my question is whether such a deployment to the cloud is technically and financially feasible or whether dedicated/VPS servers would be a better option and whether there are some real-world experiences with something similar. Thank you very much! /Jakub Holy PS: I've found the JBoss EAP in a Cloud Case Study that shows that it is possible to deploy a real-world Java EE application to the EC2 cloud but unfortunately there're no details regarding topology, instance types, or anything :-(

  Read the article

< Previous Page | 202 203 204 205 206 207 208 209 210 211 212 213  | Next Page >