Search Results

Search found 8406 results on 337 pages for 'platform independent'.

Page 206/337 | < Previous Page | 202 203 204 205 206 207 208 209 210 211 212 213  | Next Page >

  • Scoping a home dev server

    - by AbhikRK
    Hi. I’m looking to build a multi-purpose home development server. In this post, I’m looking to outline what I want from such a system, and the ‘why’s of it, to some limited extent, and finally, some rudiments of how I’m looking to go about that. I’m mostly a developer, with just about some sysadmin familiarity. So, please excuse, correct me, and suggest on any ignorance which would come across in the following ;-) It will serve the following goals to start with:- NAS (Looking at using ZFS) Source control repo e.g Git server Database e.g MySQL server Continuous Integration e.g Hudson server Other stuff as and when they come up e.g RabbitMQ etc A development sandbox to play around with new stuff I want to achieve a high uptime for 2-5 as much as possible. They should run as independent services and with minimal maintenance. (e.g TurnKey Linux appliances) I’m thinking of running them as individual Xen DomUs. Then, maybe the NAS can be a Dom0 and 6 can be another DomU. The User for this would be mostly me. I can see 2-4 being sometimes used by 2-3 users, but that would be infrequent. I’m looking for a repeatable setup. Ideally I’d like to automate this setup through Chef or Puppet or something similar. Once everything runs, I want to be able to ssh/screen/tmux into 1-6 from my laptop or any other computer on the LAN/on-the-go. My queries are:- Is putting 1-6, all of them on a single box, a good idea? If so, what kind of hardware should I be looking at, for a low-cost, low-power setup? Although not at present, but in future I might be looking at adding audio/media servers to the mix. Would that impact the answers to 1? I have an old Pentium 3 and 810e motherboard combination. Is there any way I could put it to use? I had a look at the Sheevaplug, and was wondering if I could split off the NAS on its own using that. But ruled it out preliminarily due to its reported heating issues. Is it something i should still consider? Thanks in advance Have posted this question previously on SuperUser but no responses yet. So was wondering if this is a more apt forum for this.

    Read the article

  • Setting up autotest with rspec in ubuntu

    - by Reactor5
    I'm trying to set up autotest on Ubuntu, and no matter what my configuration, I get this: loading autotest/rails_rspec2 style: RailsRspec2 /home/brian/.rvm/gems/ruby-1.9.2-rc2@rails3tutorial/gems/redgreen-1.2.2/lib/redgreen/autotest.rb:6:in `<top (required)>': uninitialized constant Object::PLATFORM (NameError) the .autotest (~/.autotest) file I have is as follows: #!/usr/bin/env ruby require 'redgreen/autotest' def self.notify title, msg, img, pri='low', time=3000 `notify-send -i #{img} -u #{pri} -t #{time} '#{msg}'` end Autotest.add_hook :ran_command do |at| results = [at.results].flatten.join("\n") output = results.slice(/(\d+)\s+examples?,\s*(\d+)\s+failures?(,\s*(\d+)\s+not implemented)?(,\s*(\d+)\s+pending)?/) folder = "~/Pictures/autotest/" if output =~ /([123456789]|[\d]{2,})\sfailures?/ notify "FAIL:", "#{output}", folder+"rails_fail.png", 'critical', 10000 elsif output =~ /[1-9]\d*\spending?/ notify "PENDING:", "#{output}", folder+"rails_pending.png", 'normal', 10000 else notify "PASS:", "#{output}", folder+"rails_ok.png" end end what am I doing wrong here?

    Read the article

  • Installing maven on Ubuntu by manual download

    - by WebDevHobo
    To install Maven, I downloaded the latest version from the website and then followed these steps: http://maven.apache.org/download.html#Installation The last step, the version control, does not work. It says that 'mvn' is currently not installed and that I should type sudo apt-get install maven2 If I go directly to the mvn file itself, it does work: root@ubuntu:~# /usr/local/apache-maven/apache-maven-2.2.1/bin/mvn --version Apache Maven 2.2.1 (r801777; 2009-08-06 12:16:01-0700) Java version: 1.6.0_21 Java home: /usr/java/jdk1.6.0_21/jre Default locale: en_US, platform encoding: UTF-8 OS name: "linux" version: "2.6.32-25-generic" arch: "i386" Family: "unix" So, what am I doing wrong here? Or what would and apt-get install do extra that I might have forgotten?

    Read the article

  • Visible Keylogger (ie not evil)

    - by Ben Haley
    I want keylogging software on my laptop for lifelogging purposes. But the software I can find is targeted towards stealth activity. Can anyone recommend a keylogging software targeted towards personal backup. Ideal Functionality Runs publicly (like in the task bar). Easy to turn off (via keyboard shortcut is best... at least via button click) Encrypted log Fast Free Cross platform ( windows at least ) The best I have found is pykeylogger which does not attempt to be stealthy, but does not attempt to be visible either. I want a keylogger focused on transparency, speed, and security so I can safely record myself. *note: Christian has a similar question with a different emphasis

    Read the article

  • How to convert series of MP3 to a M4B in a batch

    - by Artem Tikhomirov
    I have a batch of MP3 based books. Some of them divide into files according to book's own structure: chapters and so on. Some of them was just divided into equally lengthened parts. So. I've bought an iPhone, and I want to convert them all to M4B format. How could I convert them in a batch? I mean how cold I set up a process once, for each book, and then, after couple of weeks, receive totally converted library. The only able program for such conversion I've found was Audiobook Builder for a Mac. But it is pretty slow and do not support batching in principle. Solutions for any platform, please.

    Read the article

  • Installing Plone on Centos fails: Unable to find libssl or openssl/ssl.h.

    - by paskster
    My dedicated Server has CentOS 5.5. I tried to install Plone, so I basically did: wget launchpad.net/plone/4.0/4.0.2/+download/Plone-4.0.2-UnifiedInstaller.tgz tar xzf Plone-4.0.2-UnifiedInstaller.tgz cd Plone-4.0.2-UnifiedInstaller ./install.sh zeo I ran into the following error: Unable to find libssl or openssl/ssl.h. If you wish to build without SSL support, run install.sh again with --without-ssl flag. Otherwise, install your platform's openssl-dev libraries and headers and try again. After this error I successfully installed openssl: yum install openssl And i tried to install Plone again. But I keep getting the error: "Unable to find libssl or openssl/ssl.h". Anybody an idea what I'missing?

    Read the article

  • Automatic Site Creation

    - by Eddy Freeman
    I have created a platform that i want users to sign up and a new site is created for them instantly. Users will register and afterwards they will receive a username and password for their personal site. The system will work like ecommerce platforms such as www.shopify.com, www.bigcommerce.com, etc.. where users sign up and a new web-shop is created for them instantly. I have been searching for a while how i can create a script to automate this task but couldn't find any tutorials. Am using LAMP (Linux, Apache, MySql and PHP). Am asking if someone can guide me how to write such script or maybe point me to a tutorial or a book or probably similar scripts to automate this task. Sorry if this place is wrong for this question. thanks for your help.

    Read the article

  • Why can't windows see mmcblk0p3? [closed]

    - by jacknad
    The partition is created on the embedded linux target like this # n - new # p - partition # 3 - partition 3 # 66 - starting cylinder # <blank> - maximum size for the ending cylinder # t - set file system type # 3 - partition 3 # c - set to windows vfat # w - write partition table and exit echo -e "n\np\n3\n66\n\nt\n3\nc\nw" | fdisk /dev/mmcblk0 The file system is then formatted on the embedded linux target as MS-DOS like this # -n volume-name # -F FAT-size mkfs.vfat -n DB -F 32 /dev/mmcblk0p3 A linux host can mount and access files in mmcblk0p3 without issue. Why can't windows? Edit: Although the default number of FATS is 2 I tried adding -f 2 [number-of-FATs] since this is actually being done by busybox on an embedded platform but this didn't help. I understand the Linux MS-DOS file system does not support more than 2 FATs but there are only 2 on this target (the boot is also FAT which is visible), along with and EXT3 (on p2) for the root file system.

    Read the article

  • Password manager solution: Symbian based phone and a Linux machine (Windows is not important, but wo

    - by Kent
    Hi, I currently use KeePassX to manage my passwords on my Linux (Xubuntu) machine. It's nice to have all the passwords encrypted, but sometimes I'd like to be able to tell a password when I'm on the run. Therefore I'm looking for a solution which I can synchronize with my phone. I have a Nokia N82 which is a Symbian OS v9.2 based phone for the S60 3rd Edition platform with Feature Pack 1. I like an open source solution if it's possible. In case it isn't I wouldn't mind paying for a good solution. If Windows may be added to the synchronization mix it's nice, but it's absolutely not a primary requirement (I don't even have any computer running Windows).

    Read the article

  • How to set CHKDSK for drive C: in Windows 7

    - by prashanth
    I recently got a 0xc000007b error whenever I tried to run some application software. I found that CHKDSK for C drive might be a solution. When I tried to do it from C drive properties, it said the drive was in use and asked to schedule CHKDSK at the next reboot. I clicked OK. When I restart, I experience a BSOD. I waited for 10 minutes but still nothing happens. So I forced a shutdown (laptop) and again booted up the computer and got a BSOD for just 5 or 10 seconds and system boots and works with no problem. I repeated all these steps four or four times and yet with the same results. Is there any other way other than CHKDSK to solve the 0xc000007b error? If not, why is CHKDSK not working at boot up? Can I force CHKDSK on drive C: to perform while the system is on? Platform: Windows 7 64-bit.

    Read the article

  • Free Google Docs alternative compatible with Opera

    - by f4k3
    Well gDocs isn't working ok, too many bugs and it's pretty slow (especially when saving documents). I have tried several alternatives: - Zoho - they say it's not compatible with Opera and it;s true - you even can't CTRL+V text - Buzzword - it's really slow, and some functions don't work properly (on all browsers) for example "increase indent" increases a random text indent - Etherpad - was taken over by google and is shut down - Peepel - it's a cool thing, almost a free virtual desktop in a browser but it's buggy - a saved a document, tried to open it end an error occured. the document was lost - OpenGoo - went commercial At the moment I'm testing ThinkFree Online - it'a a bit slow (Java :P) and some minor things don't work (like drag a toolbar) but it has cool functionalities (almost like OpenOffice! which I use at home), it actually works with opera (create, save, edit document). Maybe I'll try Scribd but is it a office/share platform? any other worth trying??

    Read the article

  • How to host a scalable social networking app

    - by christopher-mccann
    I am in the middle of developing a social networking application for a very select user niche which could scale to a few million users. Right now I have always hosted applications on RackSpace Cloud and I have no issues with them at all - always been a really good service and never had any downtime. My question is though does anyone think that cloud computing is not the way to host scalable web apps? Or can anyone with experience of this recommend a better solution. I have always shunned trying to run big servers from my own facilities as I think it seems silly to go to the expense of bringing in big alternative power supplies and all the other necessary precautions when other companies already do this. I looked at managed hosting services but this proved to be a bit too expensive for us at the start and the scalability of it wasnt good enough - it would take a day or two to get a new server provisioned. Therefore I ended up on a cloud platform. If anyone has any recommendations or advice it would be greatly appreciated.

    Read the article

  • virtual machines and cryptography

    - by Unknown
    I suspect I'm a bit offtopic with the site mission, but it seems me more fitting for the question than stackoverflow i'm in preparing to create a vm with sensible data (personal use, it will be a web+mail+... appliance of sorts), i'd like to protect the data even with cryptography; the final choice have to be cross-platform for the host basically, I have to choose between guest system-level cryptography (say, dm-crypt or similar) or host level cryptography with truecrypt. do you think that the "truecrypt-volume contained virtualized disks" approach will hit the i/o performance of the vm badly (and therefore dm-crypt like approaches into the vm would be better), or is it doable? I'd like to protect all the guest data, not only my personal data, to be able to suspend the vm freely without worrying for the swap partition, etc

    Read the article

  • Buyers question: Have intel AES-NI already been integrated in IPSEC stacks?

    - by deploymonkey
    Dear serverfault, I need to decide between deploying Opteron 6100 and Xeon Westmere EP, so I regard this a platform question. If not, it may be moved to stackoverflow and I hereby declare that I am very sorry. Do any (F)OSS or proprietory IPSEC stacks already use the AES-NI functions of the Westmere-EP? Thanks a bundle! ps. If anyone would like to create the tag AES-NI, You're welcome. I couldn't due to lack of rep.

    Read the article

  • How to block own rpcap traffic where tshark is running?

    - by Pankaj Goyal
    Platform :- Fedora 13 32-bit machine RemoteMachine$ ./rpcapd -n ClientMachine$ tshark -w "filename" -i "any interface name" As soon as capture starts without any capture filter, thousands of packets get captured. Rpcapd binds to 2002 port by default and while establishing the connection it sends a randomly chosen port number to the client for further communication. Both client and server machines exchange tcp packets through randomly chosen ports. So, I cannot even specify the capture filter to block this rpcap related tcp traffic. Wireshark & tshark for Windows have an option "Do not capture own Rpcap Traffic" in Remote Settings in Edit Interface Dialog box. But there is no such option in tshark for linux. It will be also better if anyone can tell me how wireshark blocks rpcap traffic....

    Read the article

  • Problems with merge replication

    - by jess
    Hi, We are developing a multi-user desktop application with users located in different countries. The platform is - .net 3.5, SQL Server 2008, WinForms. Now, my client has used the help of a DBA who has implemented merge replication. To facilitate replication, we made all our primary keys as GUID. Now, we are facing these issues with replication - subscribers expiration sometimes stops replication and we have found no clean way to re-add every change to db schema requires to poll the whole data all over again! This seems to be strange, what could be the problem here? Also, sometimes we have duplicate keys, and that too stops replication I am sure these issues can be resolved. Maybe, we have not gone the right way to implement. Can you suggest how to go about implementing. Or, is the above information enough to diagnose the problem?

    Read the article

  • Virtualization deployment for datacenter

    - by bogha
    Hi, my company is going to deploy an IT Infrastructure on a virtual platform, can you please help me with the following: 1- which one do you recommend, Cisco Unified computing system ( cisco + emc + vmware )or HP Blades( virtualization solution + HP Storage )? 2- i Need to install a DNS Server, Web server, cpanel for managing hosting packages and Microsoft layer of product for usingg in the corporate infrastructur ( active directory, Local DNS, Exchange server, DHCP, Global catalog ) what is the minimum requirments for these servers ( in terms of CPU and Memory ) . 3- what is the best way to implement a redundant solution in a virtual environment. thank you

    Read the article

  • DHCP server with database backend

    - by Cory J
    I have been looking around for something to replace my (ancient) ISC-DHCPd server. A DHCP server with a database backend sounds like a great idea to me, as I could then have a nice, friendly web interface to my server. Surprisingly, I can't any major open-source projects that offer this. Does anyone know of one? I have also read about modifying ISC to use a database backend...can anyone tell me if this solution is stable enough for a busy production server? Or is using a database a Bad Idea™ all together? PS - http://stackoverflow.com/questions/893887/dchp-with-database-backend looks like SO couldn't answer this old, similar question. EDIT: I am looking for something on a free OS platform, Linux or BSD. If there is something absolutely great that is Windows-only though, still interested.

    Read the article

  • Is it safe to enable forced ASLR via EMET on Windows?

    - by D.W.
    I'd like to enable forced ASLR for all DLLs on Windows. Is this safe? Background: ASLR is an important security mechanism that helps defend against code injection attacks. DLLs can opt into ASLR, and most do, but some DLLs have not opted into ASLR. If a program loads even a single non-ASLRized DLL, then the program doesn't get the benefit/protection of ASLR. This is a problem, because there are a non-trivial number of DLLs that haven't opted into ASLR. For instance, it was recently revealed that Dropbox injects a DLL into a bunch of processes, and the Dropbox DLL doesn't have ASLR turned on, which negates any ASLR protection they otherwise would have had. Unfortunately, there are many other widely used DLLs that haven't opted into ASLR. This is bad for system security. Microsoft provides several ways to turn on ASLR for all DLLs, even ones that haven't opted into ASLR: On Windows 7 and Windows Server 2008, you can enable "Force ASLR" in the registry. On all Windows versions, you can use Microsoft's EMET tool and enable EMET's "Mandatory ASLR" option. These methods are possible because all DLLs are compiled as position-independent code and they can be relocated to a random location even if they haven't opted into ASLR. These options will ensure that ASLR is turned on, even if the developers of the DLL forgot to opt into ASLR. Thus, forcing on ASLR systemwide may help system security. In principle, turning on forced ASLR could potentially break a poorly-written DLL, so there is some risk of breakage. I'm interested in finding out just significant this risk is. I have the suspicion that this kind of breakage might be extremely rare. Here's what I've been able to find: Microsoft has done compatibility testing with several dozen widely used applications. The only one they found where Mandatory ASLR causes problems is Windows Media Player. All the other applications continue working fine. (See pp.39-41 of this document.) I've seen some anecdotal reports that enabling "Mandatory ASLR"/"Force ASLR" is fine and unlikely to cause problems. CERT reports that AMD and ATI video drivers used to crash if you enabled forced ASLR, but their latest drivers have now fixed this problem. They don't show any other drivers with this problem. A forum post from Microsoft shows no other applications with compatibility problems if ASLR is forced on, as of 2011. A user reports that borderlands.exe, a video game by Gearbox Software, crashes if you turn on mandatory ASLR. What else should I know? Is it relatively safe to turn on Force ASLR / Mandatory ASLR systemwide to harden the secuity of my system, or will I be in for a world of pain and broken applications? How significant is the risk of compatibility problems and broken applications?

    Read the article

  • First requests are painfully slow

    - by winSharp93
    I am running Redmine under IIS using Zoo. Installation was done using the Web Platform Installer and the default configuration has not been touched. However, when using the application, the first requests take very long to complete (sometimes more than one minute). During that time, the ruby.exe causes some CPU load (about 15%). According to the log files, it's mainly the views taking that long to render: Started GET "/redmine/login" for IP at 2012-09-04 09:54:08 +0200 Processing by AccountController#login as HTML Rendered account/login.html.erb within layouts/base (42150.5ms) Completed 200 OK in 43508ms (Views: 43008.5ms | ActiveRecord: 0.0ms) Rendered account/login.html.erb within layouts/base (42435.1ms) Completed 200 OK in 44100ms (Views: 43523.3ms | ActiveRecord: 0.0ms) After the initial delay, further request times are totally acceptable. Any ideas on how to speed up the warmup time?

    Read the article

  • Is there a global inbox for android?

    - by Loony2nz
    I'm a Blackberry fan and I have been aching to get a phone with a better UI (and not the jesusPhone). I was looking at the Android platform and find it quite fun to play with. However, one of the crucial elements of my BB that I love to death is the global inbox of all my email accounts. (not to mention the BB messenger, but I can live without that). Is there an addon or does the android have this feature natively? I played with my friend's Verizon Droid, and she couldn't tell me. Thanks!

    Read the article

  • bind udp problem

    - by mascix
    I am using bind 9.6.1 and about 2 days ago I realized that there is a bug at bind for windows platform. when server gets "UDP client handler shutting down due to fatal receive error: host unreachable" error. it stays alive but no response for after dns queries. then I need to restart it manually to make it responsive(I put a task for this issue from windows). I cant use microsoft windows dns server because I am using windows 2008 server web edition which does not include that. so my question is what are the other solutions you use for dns server in windows ?

    Read the article

  • Indexing text file content with command line query

    - by Drew Carlton
    I take daily notes in a plaintext file labeled with date in the YYYYMMDD format. These files are no more than 100 lines long, and are written in a blog style format. I'd like to be able search these files as if they were blog posts indexed by google, with some phrase query returning the most relevant/recent date filenames, with a snippet containing the relevant part. Ideally it would be something like this: #searchindex "laptop no sound" returns: 20100909.txt: ... laptop sound isn't working... 20100101.txt ... sound is too loud... debating what laptop to buy... and so on and so forth. I'm working on a linux platform (Debian with GNOME). I've looked at beagle and tracker, but they just seem complete overkill for what I want.

    Read the article

  • Where to install JDBC drivers in Hyperic Server

    - by Svish
    I have installed Hyperic Server 4.4.0 and I want to use an SQL plugin that connects to an Oracle database. To make this work on the Agent i had to download a JDBC driver for Oracle and put it in [agent-dir]/bundles/[bundle-dir]/pdk/lib. I can now run my plugin on the agent using java -jar hq-products.jar .... Now I want to add it so that it shows up in the server hq. I put the plugin in the appropriate directory and I can add it as a platform service. However, when i try to configure the plugin I get the following error: No suitable driver found for jdbc:oracle:thin:@blah.blah:blah:blah This is the same error I got on the client before I added the Oracle JDBC driver, so I assume that's the problem here too. But where do I put the JDBC drivers on the server?

    Read the article

  • Can GoogleApps exist with Exchange 2003

    - by Adam M.
    I am looking at the next step in our Groupware solutions. Rather got with a conventional add a new MS Server/MS Exchange to allow for growth and expanding offices. Could an Office operate with both an existing Exchange server setup and migrate a portion of mailboxes to the GoogleApps platform? I want to see if the we could use the GoogleApps for managers and larger mailboxes, and leave a large amount of small mailboxes on the existing hardware that is configured for Exchange/outlook? Can the two co-exist in an longterm configuration, where they can 'play nice' together? Is there any options that would allow for for this and would this have limitations? Such as the Free/busy connectors (Calendaring)? Is there any pitfalls for this type of design? Thanks

    Read the article

< Previous Page | 202 203 204 205 206 207 208 209 210 211 212 213  | Next Page >