Search Results

Search found 5864 results on 235 pages for 'transparent proxy'.

Page 206/235 | < Previous Page | 202 203 204 205 206 207 208 209 210 211 212 213  | Next Page >

• Siemens AG, Sector Healthcare, Increases Transparency and Improves Customer Loyalty with Web Portal Solution

  - by Kellsey Ruppel

  Siemens AG, Sector Healthcare, Increases Transparency and Improves Customer Loyalty with Web Portal Solution CUSTOMER AND PARTNER INFORMATION Customer Name – Siemens AG, Sector Healthcare Customer Revenue – 73,515 Billion Euro (2011, Siemens AG total) Customer Quote – “The realization of our complex requirements within a very short amount of time was enabled through the competent implementation partner Sapient, who fully used the  very broad scope of standard functionality provided in the Oracle WebCenter Portal, and the management of customer services, who continuously supported the project setup. ” – Joerg Modlmayr, Project Manager, Healthcare Customer Service Portal, Siemens AG The Siemens Healthcare Sector is one of the world's largest suppliers to the healthcare industry and a trendsetter in medical imaging, laboratory diagnostics, medical information technology and hearing aids. Siemens offers its customers products and solutions for the entire range of patient care from a single source – from prevention and early detection to diagnosis, and on to treatment and aftercare. By optimizing clinical workflows for the most common diseases, Siemens also makes healthcare faster, better and more cost-effective. To ensure greater transparency, increased efficiency, higher user acceptance, and additional services, Siemens AG, Sector Healthcare, replaced several existing legacy portal solutions that could not meet the company’s future needs with Oracle WebCenter Portal. Various existing portal solutions that cannot meet future demands will be successively replaced by the new central service portal, which will also allow for the efficient and intuitive implementation of new service concepts.  With Oracle, doctors and hospitals using Siemens medical solutions now have access to a central information portal that provides important information and services at just the push of a button.  Customer Name – Siemens AG, Sector Healthcare Customer URL – www.siemens.com Customer Headquarters – Erlangen, Germany Industry – Industrial Manufacturing Employees – 360,000  Challenges – Replace disparate medical service portals to meet future demands and eliminate an  unnecessarily high level of administrative work caused by heterogeneous installations Ensure portals meet current user demands to improve user-acceptance rates and increase number of total users Enable changes and expansion through standard functionality to eliminate the need for reliance on IT and reduce administrative efforts and associated high costs Ensure efficient and intuitive implementation of new service concepts for all devices and systems Ensure hospitals and clinics to transparently monitor and measure services rendered for the various medical devices and systems  Increase electronic interaction and expand services to achieve a higher level of customer loyalty Solution –  Deployed Oracle WebCenter Portal to ensure greater transparency, and as a result, a higher level of customer loyalty  Provided a centralized platform for doctors and hospitals using Siemens’ medical technology solutions that provides important information and services at the push of a button Reduced significantly the administrative workload by centralizing the solution in the new customer service portal Secured positive feedback from customers involved in the pilot program developed by design experts from Oracle partner Sapient. The interfaces were created with customer needs in mind. The first survey taken shortly after implementation came back with 2.4 points on a scale of 0-3 in the category “customer service portal intuitiveness level” Met all requirements including alignment with the Siemens Style Guide without extensive programming Implemented additional services via the portal such as benchmarking options to ensure the optimal use of the Customer Device Park Provided option for documentation of all services rendered in conjunction with the medical technology systems to ensure that the value of the services are transparent for the decision makers in the hospitals  Saved and stored all machine data from approximately 100,000 remote systems in the central service and information platform Provided the option to register errors online and follow the call status in real-time on the portal Made  available at the push of a button all information on the medical technology devices used in hospitals or clinics—from security checks and maintenance activities to current device statuses Provided PDF format Service Performance Reports that summarize information from periods of time ranging from previous weeks up to one year, meeting medical product law requirements  Why Oracle – Siemens AG favored Oracle for many reasons, however, the company ultimately decided to go with Oracle due to the enormous range of functionality the solutions offered for the healthcare sector.“We are not programmers; we are service providers in the medical technology segment and focus on the contents of the portal. All the functionality necessary for internet-based customer interaction is already standard in Oracle WebCenter Portal, which is a huge plus for us. Having Oracle as our technology partner ensures that the product will continually evolve, providing a strong technology platform for our customer service portal well into the future,” said Joerg Modlmayr project manager, Healthcare Customer Service Portal, Siemens AG. Partner Involvement – Siemens AG selected Oracle Partner Sapient because the company offered a service portfolio that perfectly met Siemens’ requirements and had a wealth of experience implementing Oracle WebCenter Portal. Additionally, Sapient had designers with a very high level of expertise in usability—an aspect that Siemens considered to be of vast importance for the project.  “The Sapient team completely met all our expectations. Our tightly timed project was completed on schedule, and the positive feedback from our users proves that we set the right measures in terms of usability—all thanks to the folks at Sapient,” Modlmayr said.  Partner Name – Sapient GmbH Deutschland Partner URL – www.sapient.com

  Read the article

• Friday Tips #6, Part 1

  - by Chris Kawalek

  We have a two parter this week, with this post focusing on desktop virtualization and the next one on server virtualization. Question: Why would I use the Oracle Secure Global Desktop Secure Gateway? Answer by Rick Butland, Principal Sales Consultant, Oracle Desktop Virtualization: Well, for the benefit of those who might not be familiar with client connections in Oracle Secure Global Desktop (SGD), let me back up and briefly explain. An SGD client connects to an SGD server using two distinct protocols, which, by default, require two distinct TCP ports. The first is the HTTP protocol, used by the web browser to connect to the SGD webserver on TCP port 80, or if secure connections are enabled (SSL/TLS), then TCP port 443, commonly identified as the "HTTPS" port, that is, "SSL encrypted HTTP." The second protocol from the client to the server is the Adaptive Internet Protocol, or AIP, which is used for displaying applications, transferring drive mapping data, print jobs, and so on. By default, AIP uses the TCP port 3104, or port 5307 when SSL is enabled. When SGD clients need to access SGD over a firewall, the ports that AIP requires are typically "closed"; and most administrators are reluctant, to put it mildly, to change their firewall configurations to allow AIP traffic on 3144/5307.   To avoid this problem, SGD introduced "Firewall Forwarding", a technique where, in effect, both http and AIP traffic are "multiplexed" onto a single "well-known" TCP port, that is port 443, the https port.  This is also known as single-port firewall traversal.  This technique takes advantage of the fact that, as a "well-known service", port 443 is usually "open",   allowing (encrypted) traffic to pass. At the target SGD server, the two protocols are de-multiplexed and routed appropriately. The Secure Gateway was developed in response to requirements from customers for SGD to support multi-stage DMZ's, and to avoid exposing SGD servers and the information they contain directly to connections from the Internet. The Secure Gateway acts as a reverse-proxy in the first-tier of the DMZ, accepting, authenticating, and terminating incoming client connections, and then re-encrypting the connections, and proxying them, routing them on to SGD servers, deeper in the network. The client no longer needs to know the name/IP address of the SGD servers in their network, they connect to the gateway, only. The gateway takes care of those internal network details.     The Secure Gateway supports the same "single-port firewall" capability as does "Firewall Forwarding", but offers the additional advantage of load-balancing incoming client connections amongst SGD array members, which could be cumbersome without a forward-deployed secure gateway. Load-balancing weights and policies can be monitored and tuned using the "Balancer Manager" application, and Apache mod_proxy_balancer directives.   Going forward, our architects recommend the use of the Secure Gateway over "Firewall Forwarding" for single-port firewall traversal, due to its architectural advantages, its greater flexibility and enhanced features.  Finally, it should be noted that the Secure Gateway is not separately priced; any licensed SGD customer may use the Secure Gateway component at no additional cost.   For more information, see the "Secure Gateway Administrator's Guide".

  Read the article

• Communication between state machines with hidden transitions

  - by slartibartfast

  The question emerged for me in embedded programming but I think it can be applied to quite a number of general networking situations e.g. when a communication partner fails. Assume we have an application logic (a program) running on a computer and a gadget connected to that computer via e.g. a serial interface like RS232. The gadget has a red/green/blue LED and a button which disables the LED. The LEDs color can be driven by software commands over the serial interface and the state (red/green/blue/off) is read back and causes a reaction in the application logic. Asynchronous behaviour of the application logic with regard to the LED color down to a certain delay (depending on the execution cycle of the application) is tolerated. What we essentially have is a resource (the LED) which can not be reserved and handled atomically by software because the (organic) user can at any time press the button to interfere/break the software attempt to switch the LED color. Stripping this example from its physical outfit I dare to say that we have two communicating state machines A (application logic) and G (gadget) where G executes state changes unbeknownst to A (and also the other way round, but this is not significant in our example) and only A can be modified at a reasonable price. A needs to see the reaction and state of G in one piece of information which may be (slightly) outdated but not inconsistent with respect to the short time window when this information was generated on the side of G. What I am looking for is a concise method to handle such a situation in embedded software (i.e. no layer/framework like CORBA etc. available). A programming technique which is able to map the complete behaviour of both participants on classical interfaces of a classical programming language (C in this case). To complicate matters (or rather, to generalize), a simple high frequency communication cycle of A to G and back (IOW: A is rapidly polling G) is out of focus because of technical restrictions (delay of serial com, A not always active, etc.). What I currently see as a general solution is: the application logic A as one thread of execution an adapter object (proxy) PG (presenting G inside the computer), together with the serial driver as another thread a communication object between the two (A and PG) which is transactionally safe to exchange The two execution contexts (threads) on the computer may be multi-core or just interrupt driven or tasks in an RTOS. The com object contains the following data: suspected state (written by A): effectively a member of the power set of states in G (in our case: red, green, blue, off, red_or_green, red_or_blue, red_or_off...etc.) command data (written by A): test_if_off, switch_to_red, switch_to_green, switch_to_blue operation status (written by PG): operation_pending, success, wrong_state, link_broken new state (written by PG): red, green, blue, off The idea of the com object is that A writes whichever (set of) state it thinks G is in, together with a command. (Example: suspected state="red_or_green", command: "switch_to_blue") Notice that the commands issued by A will not work if the user has switched off the LED and A needs to know this. PG will pick up such a com object and try to send the command to G, receive its answer (or a timeout) and set the operation status and new state accordingly. A will take back the oject once it is no longer at operation_pending and can react to the outcome. The com object could be separated of course (into two objects, one for each direction) but I think it is convenient in nearly all instances to have the command close to the result. I would like to have major flaws pointed out or hear an entirely different view on such a situation.

  Read the article

• A more elegant way of embedding a SOAP security header in Silverlight 4

  - by Your DisplayName here!

  The current situation with Silverlight is, that there is no support for the WCF federation binding. This means that all security token related interactions have to be done manually. Requesting the token from an STS is not really the bad part, sending it along with outgoing SOAP messages is what’s a little annoying. So far you had to wrap all calls on the channel in an OperationContextScope wrapping an IContextChannel. This “programming model” was a little disruptive (in addition to all the async stuff that you are forced to do). It seems that starting with SL4 there is more support for traditional WCF extensibility points – especially IEndpointBehavior, IClientMessageInspector. I never read somewhere that these are new features in SL4 – but I am pretty sure they did not exist in SL3. With the above mentioned interfaces at my disposal, I thought I have another go at embedding a security header – and yeah – I managed to make the code much prettier (and much less bizarre). Here’s the code for the behavior/inspector: public class IssuedTokenHeaderInspector : IClientMessageInspector {     RequestSecurityTokenResponse _rstr;       public IssuedTokenHeaderInspector(RequestSecurityTokenResponse rstr)     {         _rstr = rstr;     }       public void AfterReceiveReply(ref Message reply, object correlationState)     { }       public object BeforeSendRequest(ref Message request, IClientChannel channel)     {         request.Headers.Add(new IssuedTokenHeader(_rstr));                  return null;     } }   public class IssuedTokenHeaderBehavior : IEndpointBehavior {     RequestSecurityTokenResponse _rstr;       public IssuedTokenHeaderBehavior(RequestSecurityTokenResponse rstr)     {         if (rstr == null)         {             throw new ArgumentNullException();         }           _rstr = rstr;     }       public void ApplyClientBehavior(       ServiceEndpoint endpoint, ClientRuntime clientRuntime)     {         clientRuntime.MessageInspectors.Add(new IssuedTokenHeaderInspector(_rstr));     }       // rest omitted } This allows to set up a proxy with an issued token header and you don’t have to worry anymore with embedding the header manually with every call: var client = GetWSTrustClient();   var rst = new RequestSecurityToken(WSTrust13Constants.KeyTypes.Symmetric) {     AppliesTo = new EndpointAddress("https://rp/") };   client.IssueCompleted += (s, args) => {     _proxy = new StarterServiceContractClient();     _proxy.Endpoint.Behaviors.Add(new IssuedTokenHeaderBehavior(args.Result));   };   client.IssueAsync(rst); Since SL4 also support the IExtension<T> interface, you can also combine this with Nicholas Allen’s AutoHeaderExtension.

  Read the article

• Breaking 1NF to model subset constraints. Does this sound sane?

  - by Chris Travers

  My first question here. Appologize if it is in the wrong forum but this seems pretty conceptual. I am looking at doing something that goes against conventional wisdom and want to get some feedback as to whether this is totally insane or will result in problems, so critique away! I am on PostgreSQL 9.1 but may be moving to 9.2 for this part of this project. To re-iterate: Does it seem sane to break 1NF in this way? I am not looking for debugging code so much as where people see problems that this might lead. The Problem In double entry accounting, financial transactions are journal entries with an arbitrary number of lines. Each line has either a left value (debit) or a right value (credit) which can be modelled as a single value with negatives as debits and positives as credits or vice versa. The sum of all debits and credits must equal zero (so if we go with a single amount field, sum(amount) must equal zero for each financial journal entry). SQL-based databases, pretty much required for this sort of work, have no way to express this sort of constraint natively and so any approach to enforcing it in the database seems rather complex. The Write Model The journal entries are append only. There is a possibility we will add a delete model but it will be subject to a different set of restrictions and so is not applicable here. If and when we allow deletes, we will probably do them using a simple ON DELETE CASCADE designation on the foreign key, and require that deletes go through a dedicated stored procedure which can enforce the other constraints. So inserts and selects have to be accommodated but updates and deletes do not for this task. My Proposed Solution My proposed solution is to break first normal form and model constraints on arrays of tuples, with a trigger that breaks the rows out into another table. CREATE TABLE journal_line ( entry_id bigserial primary key, account_id int not null references account(id), journal_entry_id bigint not null, -- adding references later amount numeric not null ); I would then add "table methods" to extract debits and credits for reporting purposes: CREATE OR REPLACE FUNCTION debits(journal_line) RETURNS numeric LANGUAGE sql IMMUTABLE AS $$ SELECT CASE WHEN $1.amount < 0 THEN $1.amount * -1 ELSE NULL END; $$; CREATE OR REPLACE FUNCTION credits(journal_line) RETURNS numeric LANGUAGE sql IMMUTABLE AS $$ SELECT CASE WHEN $1.amount > 0 THEN $1.amount ELSE NULL END; $$; Then the journal entry table (simplified for this example): CREATE TABLE journal_entry ( entry_id bigserial primary key, -- no natural keys :-( journal_id int not null references journal(id), date_posted date not null, reference text not null, description text not null, journal_lines journal_line[] not null ); Then a table method and and check constraints: CREATE OR REPLACE FUNCTION running_total(journal_entry) returns numeric language sql immutable as $$ SELECT sum(amount) FROM unnest($1.journal_lines); $$; ALTER TABLE journal_entry ADD CONSTRAINT CHECK (((journal_entry.running_total) = 0)); ALTER TABLE journal_line ADD FOREIGN KEY journal_entry_id REFERENCES journal_entry(entry_id); And finally we'd have a breakout trigger: CREATE OR REPLACE FUNCTION je_breakout() RETURNS TRIGGER LANGUAGE PLPGSQL AS $$ BEGIN IF TG_OP = 'INSERT' THEN INSERT INTO journal_line (journal_entry_id, account_id, amount) SELECT NEW.id, account_id, amount FROM unnest(NEW.journal_lines); RETURN NEW; ELSE RAISE EXCEPTION 'Operation Not Allowed'; END IF; END; $$; And finally CREATE TRIGGER AFTER INSERT OR UPDATE OR DELETE ON journal_entry FOR EACH ROW EXECUTE_PROCEDURE je_breaout(); Of course the example above is simplified. There will be a status table that will track approval status allowing for separation of duties, etc. However the goal here is to prevent unbalanced transactions. Any feedback? Does this sound entirely insane? Standard Solutions? In getting to this point I have to say I have looked at four different current ERP solutions to this problems: Represent every line item as a debit and a credit against different accounts. Use of foreign keys against the line item table to enforce an eventual running total of 0 Use of constraint triggers in PostgreSQL Forcing all validation here solely through the app logic. My concerns are that #1 is pretty limiting and very hard to audit internally. It's not programmer transparent and so it strikes me as being difficult to work with in the future. The second strikes me as being very complex and required a series of contraints and foreign keys against self to make work, and therefore it strikes me as complex, hard to sort out at least in my mind, and thus hard to work with. The fourth could be done as we force all access through stored procedures anyway and this is the most common solution (have the app total things up and throw an error otherwise). However, I think proof that a constraint is followed is superior to test cases, and so the question becomes whether this in fact generates insert anomilies rather than solving them. If this is a solved problem it isn't the case that everyone agrees on the solution....

  Read the article

• Performance triage

  - by Dave

  Folks often ask me how to approach a suspected performance issue. My personal strategy is informed by the fact that I work on concurrency issues. (When you have a hammer everything looks like a nail, but I'll try to keep this general). A good starting point is to ask yourself if the observed performance matches your expectations. Expectations might be derived from known system performance limits, prototypes, and other software or environments that are comparable to your particular system-under-test. Some simple comparisons and microbenchmarks can be useful at this stage. It's also useful to write some very simple programs to validate some of the reported or expected system limits. Can that disk controller really tolerate and sustain 500 reads per second? To reduce the number of confounding factors it's better to try to answer that question with a very simple targeted program. And finally, nothing beats having familiarity with the technologies that underlying your particular layer. On the topic of confounding factors, as our technology stacks become deeper and less transparent, we often find our own technology working against us in some unexpected way to choke performance rather than simply running into some fundamental system limit. A good example is the warm-up time needed by just-in-time compilers in Java Virtual Machines. I won't delve too far into that particular hole except to say that it's rare to find good benchmarks and methodology for java code. Another example is power management on x86. Power management is great, but it can take a while for the CPUs to throttle up from low(er) frequencies to full throttle. And while I love "turbo" mode, it makes benchmarking applications with multiple threads a chore as you have to remember to turn it off and then back on otherwise short single-threaded runs may look abnormally fast compared to runs with higher thread counts. In general for performance characterization I disable turbo mode and fix the power governor at "performance" state. Another source of complexity is the scheduler, which I've discussed in prior blog entries. Lets say I have a running application and I want to better understand its behavior and performance. We'll presume it's warmed up, is under load, and is an execution mode representative of what we think the norm would be. It should be in steady-state, if a steady-state mode even exists. On Solaris the very first thing I'll do is take a set of "pstack" samples. Pstack briefly stops the process and walks each of the stacks, reporting symbolic information (if available) for each frame. For Java, pstack has been augmented to understand java frames, and even report inlining. A few pstack samples can provide powerful insight into what's actually going on inside the program. You'll be able to see calling patterns, which threads are blocked on what system calls or synchronization constructs, memory allocation, etc. If your code is CPU-bound then you'll get a good sense where the cycles are being spent. (I should caution that normal C/C++ inlining can diffuse an otherwise "hot" method into other methods. This is a rare instance where pstack sampling might not immediately point to the key problem). At this point you'll need to reconcile what you're seeing with pstack and your mental model of what you think the program should be doing. They're often rather different. And generally if there's a key performance issue, you'll spot it with a moderate number of samples. I'll also use OS-level observability tools to lock for the existence of bottlenecks where threads contend for locks; other situations where threads are blocked; and the distribution of threads over the system. On Solaris some good tools are mpstat and too a lesser degree, vmstat. Try running "mpstat -a 5" in one window while the application program runs concurrently. One key measure is the voluntary context switch rate "vctx" or "csw" which reflects threads descheduling themselves. It's also good to look at the user; system; and idle CPU percentages. This can give a broad but useful understanding if your threads are mostly parked or mostly running. For instance if your program makes heavy use of malloc/free, then it might be the case you're contending on the central malloc lock in the default allocator. In that case you'd see malloc calling lock in the stack traces, observe a high csw/vctx rate as threads block for the malloc lock, and your "usr" time would be less than expected. Solaris dtrace is a wonderful and invaluable performance tool as well, but in a sense you have to frame and articulate a meaningful and specific question to get a useful answer, so I tend not to use it for first-order screening of problems. It's also most effective for OS and software-level performance issues as opposed to HW-level issues. For that reason I recommend mpstat & pstack as my the 1st step in performance triage. If some other OS-level issue is evident then it's good to switch to dtrace to drill more deeply into the problem. Only after I've ruled out OS-level issues do I switch to using hardware performance counters to look for architectural impediments.

  Read the article

• Know your Data Lineage

  - by Simon Elliston Ball

  An academic paper without the footnotes isn’t an academic paper. Journalists wouldn’t base a news article on facts that they can’t verify. So why would anyone publish reports without being able to say where the data has come from and be confident of its quality, in other words, without knowing its lineage. (sometimes referred to as ‘provenance’ or ‘pedigree’) The number and variety of data sources, both traditional and new, increases inexorably. Data comes clean or dirty, processed or raw, unimpeachable or entirely fabricated. On its journey to our report, from its source, the data can travel through a network of interconnected pipes, passing through numerous distinct systems, each managed by different people. At each point along the pipeline, it can be changed, filtered, aggregated and combined. When the data finally emerges, how can we be sure that it is right? How can we be certain that no part of the data collection was based on incorrect assumptions, that key data points haven’t been left out, or that the sources are good? Even when we’re using data science to give us an approximate or probable answer, we cannot have any confidence in the results without confidence in the data from which it came. You need to know what has been done to your data, where it came from, and who is responsible for each stage of the analysis. This information represents your data lineage; it is your stack-trace. If you’re an analyst, suspicious of a number, it tells you why the number is there and how it got there. If you’re a developer, working on a pipeline, it provides the context you need to track down the bug. If you’re a manager, or an auditor, it lets you know the right things are being done. Lineage tracking is part of good data governance. Most audit and lineage systems require you to buy into their whole structure. If you are using Hadoop for your data storage and processing, then tools like Falcon allow you to track lineage, as long as you are using Falcon to write and run the pipeline. It can mean learning a new way of running your jobs (or using some sort of proxy), and even a distinct way of writing your queries. Other Hadoop tools provide a lot of operational and audit information, spread throughout the many logs produced by Hive, Sqoop, MapReduce and all the various moving parts that make up the eco-system. To get a full picture of what’s going on in your Hadoop system you need to capture both Falcon lineage and the data-exhaust of other tools that Falcon can’t orchestrate. However, the problem is bigger even that that. Often, Hadoop is just one piece in a larger processing workflow. The next step of the challenge is how you bind together the lineage metadata describing what happened before and after Hadoop, where ‘after’ could be  a data analysis environment like R, an application, or even directly into an end-user tool such as Tableau or Excel. One possibility is to push as much as you can of your key analytics into Hadoop, but would you give up the power, and familiarity of your existing tools in return for a reliable way of tracking lineage? Lineage and auditing should work consistently, automatically and quietly, allowing users to access their data with any tool they require to use. The real solution, therefore, is to create a consistent method by which to bring lineage data from these data various disparate sources into the data analysis platform that you use, rather than being forced to use the tool that manages the pipeline for the lineage and a different tool for the data analysis. The key is to keep your logs, keep your audit data, from every source, bring them together and use the data analysis tools to trace the paths from raw data to the answer that data analysis provides.

  Read the article

• My shiny new gadget

  - by TechTwaddle

  About 3 months ago when I had tweeted (or twit?) that the HD7 could be my next phone I wasn’t a 100 percent sure, and when the HTC Mozart came out it was switch at first sight. I wanted to buy the Mozart mainly for three reasons; its unibody construction, smaller screen and the SLCD display. But now, holding a HD7 in my hand, I reminisce and think about how fate had its own plan. Too dramatic for a piece of gadget? Well, sort of, but seriously, this has been most exciting. So in short, I bought myself a HTC HD7 and am really loving it so far. Here are some pics (taken from my HD2 which now lies in a corner, crying),     Most of my day was spent setting up the device. Email accounts, Facebook, Marketplace etc. Since marketplace isn’t officially launched in India yet, my primary live id did not work. Whenever I tried launching marketplace it would say ‘marketplace is not currently supported in your country’. Searching the forums I found an easy work around. Just create a dummy live id with the country set to UK or US and log in to the device using this id. I was worried if the contacts and feeds from my primary live account would not be updated but that was not a problem. Adding another live account into the device does import your contacts, calendar and feeds from it. And that’s it, marketplace now works perfectly. I installed a few trial and free applications; haven’t checked if I can purchase apps though, will check that later and update this post. There is one issue I am still facing with the device, I can’t access the internet over GPRS. Windows Phone 7 only gives you the option to add an ‘APN’ and nothing else. Checking the connection settings on my HD2, I found out that there is also a proxy server I need to add to access GPRS, but so far I haven’t found a way to do that on WP7. Ideally HTC should have taken care of this, detect the operator and apply that operators settings on the device, but looks like that’s not happening. I also tried the ‘Connection Settings’ application that HTC bundled with the device, but it did nothing magical. If you’re reading this and know how to fix this problem please leave a comment. The next thing I did is install apps, a lot of apps. Read Engadget’s guide to essential apps for WP7. The apps and games I installed so far include Beezz (twitter app with push notifications), twitter (the official twitter app), Facebook, Youtube, NFS Undercover, Rocket Riot, Krashlander, Unite and the list goes on. All the apps run super smooth. The display looks fine indoors but I know it’s going to suck in bright sunlight. Anyhow, I am really impressed with what I’ve seen so far. I leave you with a few more photos. Have a great year ahead. Ciao!

  Read the article

• Reading the tea leaves from Windows Azure support

  - by jamiet

  A few idle thoughts… Three months ago I had an issue regarding Windows Azure where I was unable to login to the management portal. At the time I contacted Azure support, the issue was soon resolved and I thought no more about it. Until today that is when I received an email from Azure support providing a detailed analysis of the root cause, the fix and moreover precise details about when and where things occurred. The email itself is interesting and I have included the entirety of it below. A few things were interesting to me: The level of detail and the diligence in investigating and reporting the issue I found really rather impressive. They even outline the number of users that were affected (127 in case you can’t be bothered reading). Compare this to the quite pathetic support that another division within Microsoft, Skype, provided to Greg Low recently: Skype support and dead parrot sketches   This line: “Windows Azure performed a planned change from using the Microsoft account service (formerly Windows Live ID) to the Azure Active Directory (AAD) as its primary authentication mechanism on August 24th. This change was made to enable future innovation in the area of authentication – particularly for organizationally owned identities, identity federation, stronger authentication methods and compliance certification. ” I also found to be particularly interesting. I have long thought that one of the reasons Microsoft has proved to be such a money-making machine in the enterprise is because they provide the infrastructure and then upsell on top of that – and nothing is more infrastructural than Active Directory. It has struck me of late that they are trying to make the same play of late in the cloud by tying all their services into Azure Active Directory and here we see a clear indication of that by making AAD the authentication mechanism for anyone using Windows Azure. I get the feeling that we’re going to hear much much more about AAD in the future; isn’t it about time we could log on to SQL Azure Windows Azure SQL Database without resorting to SQL authentication, for example? And why do Microsoft have two identity providers – Microsoft Account (aka Windows Live ID) and AAD – isn’t it about time those things were combined? As I said, just some idle thoughts. Below is the transcript of the email if you are interested. @Jamiet  This is regarding the support request <redacted> where in you were not able to login into the windows azure management portal with live id. We are providing you with the summary, root cause analysis and information about permanent fix: Incident Title: You were unable to access Windows Azure Portal after Microsoft Account to Azure Active Directory account Migration. Service Impacted: Management Portal Incident Start Date and Time: 8/24/2012 4:30:00 PM Date and Time Service was Restored: 10/17/2012 12:00:00 AM Summary: Windows Azure performed a planned change from using the Microsoft account service (formerly Windows Live ID) to the Azure Active Directory (AAD) as its primary authentication mechanism on August 24th.   This change was made to enable future innovation in the area of authentication – particularly for organizationally owned identities, identity federation, stronger authentication methods and compliance certification.   While this migration was largely transparent to Windows Azure users, a small number of users whose sign-in names were part of a Windows Live Custom Domain were unable to login.   This incompatibility was not discovered during the Quality Assurance testing phase prior to the migration. Customer Impact: Customers whose sign-in names were part of a Windows Live Custom Domain were unable to sign-in the Management Portal after ~4:00 p.m. PST on August 24th, 2012.   We determined that the issue did impact at least 127 users in 98 of these Windows Live Custom Domains and had a maximum potential impact of 1,110 users in total. Root Cause: The root cause of the issue was an incompatibility in the AAD authentication service to handle logins from Microsoft accounts whose sign-in names were part of a Windows Live Custom Domains.  This issue was not discovered during the Quality Assurance testing phase prior to the migration from Microsoft Account (MSA) to AAD. Mitigations: The issue was mitigated for the majority of affected users by 8:20 a.m. PST on August 25th, 2012 by running some internal scripts to correct many known Windows Live Custom Domains.   The remaining affected domains fell into two categories: Windows Live Custom Domains that were not corrected by 8/25/2012. An additional 48 Windows Live Custom Domains were fixed in the weeks following the incident within 2 business days after the AAD team received an escalation from product support regarding those accounts. Windows Live Custom domains that were also provisioned in Office365. Some of the affected Windows Live Custom Domains had already been provisioned in AAD because their owners signed up for Office365 which is a service that also uses AAD.   In these cases the Azure customers had to work around the issue by renaming their Microsoft Account or using a different Microsoft Account to administer their Azure subscription. Permanent Fix: The Azure Active Directory team permanently fixed the issue for all customers on 10/17/2012 in an upgraded release of the AAD service.

  Read the article

• How do you deal with poor management [closed]

  - by Sybiam

  I come from a company where during a project, we saw the client 3 time during the whole project. We were never informed when did the client came in office in order to discuss with him about his requirements. I did setup redmine and told them that if they have any request they can post an issue there. But they never really used redmine to publish anything. They would instead: harass a team member on the phone at any time of the day or night hand us over sheets of paper with new requests or changes hand us over new design (graphical) They requested how much time it would take us to finish the project, I gave them a date and a week to test everything and deployment. I calculated that time taking into account the current features we had to do. And then blamed us that our deadline was wrong and that we lied. But the truth is that one week before that deadline they added a couple of monster feature from nowhere and that week were we were supposed to test and deploy, my friends spent all day in the office changing all little things. After that project, my friend got some kind of depression and got scared everytime his phone rang. They kind of used him as a communication proxy. After that project of hell, (every body got pissed off on that project) as far as I know the designer who was working with us left work after that project and she had some kind of issue too with managers. My team also started looking for work somewhere else. At first I tried to get things straight with management, I tried to make a meeting to discuss about the communication issues and so on.. What really pissed me off and made me leave that job for good is the following. Me: "We have to discuss about what went wrong on the last project. It's quite important" Him: "Lets talk about it in a week or two. Just make a list of all the things you did wrong" Me: "We already have a new project and we want to prevent what happened on the last project to happen again" Him: "Just do it and well have our meeting in a week, make a list of all the thing you did wrong." It kind of ended there then he organized a meeting at a moment I wasn't unable to come. My friend discussed with him and tried to explained him that we really had to discuss about organization issue on how to manage a project. And his answer was pretty much: "During the meeting I don't want to ear how you want to us to manage a project but I want to know what you guys did wrong" After that I felt it wasn't even worth it discussing anything since they weren't even ready listening to us. Found a new job and I'm pretty happy with my choice. I'd like to know how you'd handle such situation. Is there anything to do to solve communication problem? After that project my friend got a depression and some other employee had their down too as far as I know. I wonder what else we can do other than leave these place as soon as possible. Feel sad for the people that are still there and get screamed at just because they need money in order to eat and finding an other job like that isn't that easy. note I died a little when our boss asked us to make a list of things we (programmers) did wrong. This is probably the stupidest request I ever got. If everybody thinks they did everything right, it doesn't mean that there is no problems. Individual problem are rarely the big issue. Colleagues help each others and solve theses issues to prevent problems.

  Read the article

• Mousin' down the PathListBox

  - by T

  While modifying the standard media player with a new look and feel for Ineta Live I saw a unique opportunity to use their logo with a dotted I with and attached arc as the scrub control. So I created a PathListBox that I wanted an object to follow when a user did a click and drag action.  Below is how I solved the problem.  Please let me know if you have improvements or know of a completely different way.  I am always eager to learn. First, I created a path using the pen tool in Expression Blend (see the yellow line in image below).  Then I right clicked that path and chose [Path] --> [Make Layout Path].   That created a new PathListBox.  Then I chose the object I want to move down the new PathListBox and Placed it as a child in the Objects and Timeline window (see image below).  If the child object (the thing the user will click and drag) is XAML, it will move much smoother than images. Just as another side note, I wanted there to be no highlight when the user selects the “ball” to drag and drop.  This is done by editing the ItemContainerStyle under Additional Templates on the PathListBox.  Post a question if you need help on this and I will expand my explanation. Here is a pic of the object and the path I wanted it to follow.  I gave the path a yellow solid brush here so you could see it but when I lay this over another object, I will make the path transparent.   To animate this object down the path, the trick is to animate the Start number for the LayoutPath.  Not the StartItemIndex, the Start above Span. In order to enable animation when a user clicks and drags, I put in the following code snippets in the code behind. the DependencyProperties are not necessary for the Drag control.   namespace InetaPlayer { public partial class PositionControl : UserControl { private bool _mouseDown; private double _maxPlayTime; public PositionControl() { // Required to initialize variables InitializeComponent(); //mouse events for scrub control positionThumb.MouseLeftButtonDown += new MouseButtonEventHandler(ValueThumb_MouseLeftButtonDown); positionThumb.MouseLeftButtonUp += new MouseButtonEventHandler(ValueThumb_MouseLeftButtonUp); positionThumb.MouseMove += new MouseEventHandler(ValueThumb_MouseMove); positionThumb.LostMouseCapture += new MouseEventHandler(ValueThumb_LostMouseCapture); } // exposed for binding to real slider using a DependencyProperty enables animation, styling, binding, etc.... public double MaxPlayTime { get { return (double)GetValue(MaxPlayTimeProperty); } set { SetValue(MaxPlayTimeProperty, value); } } public static readonly DependencyProperty MaxPlayTimeProperty = DependencyProperty.Register("MaxPlayTime", typeof(double), typeof(PositionControl), null);   // exposed for binding to real slider using a DependencyProperty enables animation, styling, binding, etc....   public double CurrSliderValue { get { return (double)GetValue(CurrSliderValueProperty); } set { SetValue(CurrSliderValueProperty, value); } }   public static readonly DependencyProperty CurrSliderValueProperty = DependencyProperty.Register("CurrSliderValue", typeof(double), typeof(PositionControl), new PropertyMetadata(0.0, OnCurrSliderValuePropertyChanged));   private static void OnCurrSliderValuePropertyChanged(DependencyObject d, DependencyPropertyChangedEventArgs e) { PositionControl control = d as PositionControl; control.OnCurrSliderValueChanged((double)e.OldValue, (double)e.NewValue); }   private void OnCurrSliderValueChanged(double oldValue, double newValue) { _maxPlayTime = (double) GetValue(MaxPlayTimeProperty); if (!_mouseDown) if (_maxPlayTime!=0) sliderPathListBox.LayoutPaths[0].Start = newValue / _maxPlayTime; else sliderPathListBox.LayoutPaths[0].Start = 0; }   //mouse control   void ValueThumb_MouseMove(object sender, MouseEventArgs e) { if (!_mouseDown) return; //get the offset of how far the drag has been //direction is handled automatically (offset will be negative for left move and positive for right move) Point mouseOff = e.GetPosition(positionThumb); //Divide the offset by 1000 for a smooth transition sliderPathListBox.LayoutPaths[0].Start +=mouseOff.X/1000; _maxPlayTime = (double)GetValue(MaxPlayTimeProperty); SetValue(CurrSliderValueProperty ,sliderPathListBox.LayoutPaths[0].Start*_maxPlayTime); }   void ValueThumb_MouseLeftButtonUp(object sender, MouseButtonEventArgs e) { _mouseDown = false; } void ValueThumb_LostMouseCapture(object sender, MouseEventArgs e) { _mouseDown = false; } void ValueThumb_MouseLeftButtonDown(object sender, MouseButtonEventArgs e) { _mouseDown = true; ((UIElement)positionThumb).CaptureMouse(); }   } }   I made this into a user control and exposed a couple of DependencyProperties in order to bind it to a standard Slider in the overall project.  This control is embedded into the standard Expression media player template and is used to replace the standard scrub bar.  When the player goes live, I will put a link here.

  Read the article

• Problem in udp socket programing in c

  - by Md. Talha

  I complile the following C code of UDP client after I run './udpclient localhost 9191' in terminal.I put "Enter Text= " as Hello, but it is showing error in sendto as below: Enter text: hello hello : error in sendto()guest-1SDRJ2@md-K42F:~/Desktop$ " Note: I open 1st the server port as below in other terminal ./server 9191. I beleive there is no error in server code. The udp client is not passing message to server. If I don't use thread , the message is passing .But I have to do it by thread. UDP client Code: /* simple UDP echo client */ #include <sys/types.h> #include <sys/socket.h> #include <netinet/in.h> #include <arpa/inet.h> #include <netdb.h> #include <stdio.h> #include <pthread.h> #define STRLEN 1024 static void *readdata(void *); static void *writedata(void *); int sockfd, n, slen; struct sockaddr_in servaddr; char sendline[STRLEN], recvline[STRLEN]; int main(int argc, char *argv[]) { pthread_t readid,writeid; struct sockaddr_in servaddr; struct hostent *h; if(argc != 3) { printf("Usage: %s <proxy server ip> <port>\n", argv[0]); exit(0); } /* create hostent structure from user entered host name*/ if ( (h = gethostbyname(argv[1])) == NULL) { printf("\n%s: error in gethostbyname()", argv[0]); exit(0); } /* create server address structure */ bzero(&servaddr, sizeof(servaddr)); /* initialize it */ servaddr.sin_family = AF_INET; memcpy((char *) &servaddr.sin_addr.s_addr, h->h_addr_list[0], h->h_length); servaddr.sin_port = htons(atoi(argv[2])); /* get the port number from argv[2]*/ /* create a UDP socket: SOCK_DGRAM */ if ( (sockfd = socket(AF_INET,SOCK_DGRAM, 0)) < 0) { printf("\n%s: error in socket()", argv[0]); exit(0); } pthread_create(&readid,NULL,&readdata,NULL); pthread_create(&writeid,NULL,&writedata,NULL); while(1) { }; close(sockfd); } static void * writedata(void *arg) { /* get user input */ printf("\nEnter text: "); do { if (fgets(sendline, STRLEN, stdin) == NULL) { printf("\n%s: error in fgets()"); exit(0); } /* send a text */ if (sendto(sockfd, sendline, sizeof(sendline), 0, (struct sockaddr *) &servaddr, sizeof(servaddr)) < 0) { printf("\n%s: error in sendto()"); exit(0); } }while(1); } static void * readdata(void *arg) { /* wait for echo */ slen = sizeof(servaddr); if ( (n = recvfrom(sockfd, recvline, STRLEN, 0, (struct sockaddr *) &servaddr, &slen)) < 0) { printf("\n%s: error in recvfrom()"); exit(0); } /* null terminate the string */ recvline[n] = 0; fputs(recvline, stdout); }

  Read the article

• Mousin' down the PathListBox

  - by T

  While modifying the standard media player with a new look and feel for Ineta Live I saw a unique opportunity to use their logo with a dotted I with and attached arc as the scrub control. So I created a PathListBox that I wanted an object to follow when a user did a click and drag action.  Below is how I solved the problem.  Please let me know if you have improvements or know of a completely different way.  I am always eager to learn. First, I created a path using the pen tool in Expression Blend (see the yellow line in image below).  Then I right clicked that path and chose [Path] --> [Make Layout Path].   That created a new PathListBox.  Then I chose the object I want to move down the new PathListBox and Placed it as a child in the Objects and Timeline window (see image below).  If the child object (the thing the user will click and drag) is XAML, it will move much smoother than images. Just as another side note, I wanted there to be no highlight when the user selects the “ball” to drag and drop.  This is done by editing the ItemContainerStyle under Additional Templates on the PathListBox.  Post a question if you need help on this and I will expand my explanation. Here is a pic of the object and the path I wanted it to follow.  I gave the path a yellow solid brush here so you could see it but when I lay this over another object, I will make the path transparent.   To animate this object down the path, the trick is to animate the Start number for the LayoutPath.  Not the StartItemIndex, the Start above Span. In order to enable animation when a user clicks and drags, I put in the following code snippets in the code behind. the DependencyProperties are not necessary for the Drag control. namespace InetaPlayer{ public partial class PositionControl : UserControl { private bool _mouseDown; private double _maxPlayTime; public PositionControl() { // Required to initialize variables InitializeComponent(); //mouse events for scrub control positionThumb.MouseLeftButtonDown += new MouseButtonEventHandler(ValueThumb_MouseLeftButtonDown); positionThumb.MouseLeftButtonUp += new MouseButtonEventHandler(ValueThumb_MouseLeftButtonUp); positionThumb.MouseMove += new MouseEventHandler(ValueThumb_MouseMove); positionThumb.LostMouseCapture += new MouseEventHandler(ValueThumb_LostMouseCapture); } // exposed for binding to real slider using a DependencyProperty enables animation, styling, binding, etc.... public double MaxPlayTime { get { return (double)GetValue(MaxPlayTimeProperty); } set { SetValue(MaxPlayTimeProperty, value); } } public static readonly DependencyProperty MaxPlayTimeProperty = DependencyProperty.Register("MaxPlayTime", typeof(double), typeof(PositionControl), null);   // exposed for binding to real slider using a DependencyProperty enables animation, styling, binding, etc....   public double CurrSliderValue { get { return (double)GetValue(CurrSliderValueProperty); } set { SetValue(CurrSliderValueProperty, value); } }   public static readonly DependencyProperty CurrSliderValueProperty = DependencyProperty.Register("CurrSliderValue", typeof(double), typeof(PositionControl), new PropertyMetadata(0.0, OnCurrSliderValuePropertyChanged));   private static void OnCurrSliderValuePropertyChanged(DependencyObject d, DependencyPropertyChangedEventArgs e) { PositionControl control = d as PositionControl; control.OnCurrSliderValueChanged((double)e.OldValue, (double)e.NewValue); }   private void OnCurrSliderValueChanged(double oldValue, double newValue) { _maxPlayTime = (double) GetValue(MaxPlayTimeProperty); if (!_mouseDown) if (_maxPlayTime!=0) sliderPathListBox.LayoutPaths[0].Start = newValue / _maxPlayTime; else sliderPathListBox.LayoutPaths[0].Start = 0; }  //mouse control   void ValueThumb_MouseMove(object sender, MouseEventArgs e) { if (!_mouseDown) return; //get the offset of how far the drag has been //direction is handled automatically (offset will be negative for left move and positive for right move) Point mouseOff = e.GetPosition(positionThumb); //Divide the offset by 1000 for a smooth transition sliderPathListBox.LayoutPaths[0].Start +=mouseOff.X/1000; _maxPlayTime = (double)GetValue(MaxPlayTimeProperty); SetValue(CurrSliderValueProperty ,sliderPathListBox.LayoutPaths[0].Start*_maxPlayTime); }   void ValueThumb_MouseLeftButtonUp(object sender, MouseButtonEventArgs e) { _mouseDown = false; } void ValueThumb_LostMouseCapture(object sender, MouseEventArgs e) { _mouseDown = false; } void ValueThumb_MouseLeftButtonDown(object sender, MouseButtonEventArgs e) { _mouseDown = true; ((UIElement)positionThumb).CaptureMouse(); }   }}  I made this into a user control and exposed a couple of DependencyProperties in order to bind it to a standard Slider in the overall project.  This control is embedded into the standard Expression media player template and is used to replace the standard scrub bar.  When the player goes live, I will put a link here.

  Read the article

• c# WinForms ReportViewer Performance issue using RefreshReport() and ServerReport.SetParameters()

  - by mdk

  Hi All, Currently I am writing a c# client application that uses the WinForms ReportViewer Control to display reports from a remote server. I am having performance troubles with the ReportViewer Control, to be specific with the 2 methods reportViewer.ServerReport.SetParameters() and reportViewer.RefreshReport() – they both take a really long time to complete and not just on the very first call, but on each subsequent call as well. SetParameters() takes 20 to 40 seconds (they vary greatly in time, some execute event okay fast) and RefreshReport() is a bit faster but still takes ages. I don’t think the server is the culprit, as the same report viewed using the browser renders pretty fast, about a second tops. The report in question doesn't matter as well. When I break into the process and take a look at the call stack, I see a call to Socket.DoConnect. So I thought that’s a good reason to start using fiddler and I installed it, disabled caching and fired up the app again to see which call takes that long to connect, but the performance issue was gone. By using a proxy I am having the same performance as the webbrowser. FYI: I am using NTLM authentication in the following way: reportViewer.ServerReport.ReportServerCredentials.NetworkCredentials = new NetworkCredentials() { Username = ... } I don’t have a strong webbackground, so I guess my question is: What should this tell me / What should I be looking into? (Btw: Adding fiddler to my installation package is not the solution I am looking for :)) I am grateful for any pointers. Take care, -Martin

  Read the article

• Maven error: Unable to get resource / Server redirected too many times

  - by tewe

  Our proxy went down and I tried to update dependencies with maven while it was off. Since then I can't download anything with maven. I get this error for everything. I tried -U option, deleting my local repository and tried different maven version (2.0.9, 2.2.1) but it doesn't work. Any idea how to solve this? Earlier it also said 'repository will be blacklisted' to all of them. Downloading: http://repo1.maven.org/maven2/org/apache/maven/plugins/maven-compiler-plugin/2.1/maven-compiler-plugin-2.1.pom [WARNING] Unable to get resource 'org.apache.maven.plugins:maven-compiler-plugin:pom:2.1' from repository central (http://repo1.maven.org/maven2): Error transferring file: Server redirected too many times (20) org.apache.maven.plugins:maven-compiler-plugin:pom:2.1 from the specified remote repositories: jboss-snapshot (http://snapshots.jboss.org/maven2), central (http://repo1.maven.org/maven2), JBoss Repo (http://repository.jboss.com/maven2), spring-maven-snapshot (http://maven.springframework.org/snapshot), com.springsource.repository.bundles.external (http://repository.springsource.com/maven/bundles/external), com.springsource.repository.bundles.snapshot (http://repository.springsource.com/maven/bundles/snapshot), jboss (http://repository.jboss.com/maven2), com.springsource.repository.bundles.release (http://repository.springsource.com/maven/bundles/release), jboss-snapshot-plugins (http://snapshots.jboss.org/maven2), com.springsource.repository.bundles.milestone (http://repository.springsource.com/maven/bundles/milestone), jboss-plugins (http://repository.jboss.com/maven2) at org.apache.maven.artifact.resolver.DefaultArtifactResolver.resolve(DefaultArtifactResolver.java:228) at org.apache.maven.artifact.resolver.DefaultArtifactResolver.resolve(DefaultArtifactResolver.java:90) at org.apache.maven.project.DefaultMavenProjectBuilder.findModelFromRepository(DefaultMavenProjectBuilder.java:558) ... 25 more Caused by: org.apache.maven.wagon.ResourceDoesNotExistException: Unable to download the artifact from any repository at org.apache.maven.artifact.manager.DefaultWagonManager.getArtifact(DefaultWagonManager.java:404) at org.apache.maven.artifact.resolver.DefaultArtifactResolver.resolve(DefaultArtifactResolver.java:216) ... 27 more

  Read the article

• Error message: "Two different contracts have the same ConfigurationName" when downloading wsdl from

  - by rwwilden

  I get the following error message when I try to use svcutil to generate a client proxy for a xamlx file that is hosted by AppFabric beta 2: Two different contracts have the same ConfigurationName I understand the message, however, I cannot find its cause or how to fix it. I'm following the 'Introduction to Workflow Services' lab from the VS2010RC training kit. The web application has two services: SubmitApplication.xamlx and EducationScreening.xamlx. I'm not sure why but both of them have four endpoints. If I take a look via the AppFabric Dashboard in IIS Mgmt Studio: basicHttpBinding (Contract: *) (Type: Application(Default)) netNamedPipeBinding (Contract: System.ServiceModel.Activities.IWorkflowInstanceManagement) (Type: System (workflowControlEndpoint)) netNamedPipeBinding (Contract: *) (Type: Application (Default)) serviceMetadataHttpGetBinding (Contract: serviceMetadataHttpGetContract) (Type: System (serviceMetadataEndpoint)) When taking a look at the SubmitApplication.xamlx in a browser, I see the following stacktrace: [InvalidOperationException: Two different contracts have the same ConfigurationName.] System.ServiceModel.Activities.WorkflowServiceHost.CreateDescription(IDictionary`2& implementedContracts) +361 System.ServiceModel.ServiceHostBase.InitializeDescription(UriSchemeKeyedCollection baseAddresses) +174 System.ServiceModel.Activities.WorkflowServiceHost.InitializeDescription(WorkflowService serviceDefinition, UriSchemeKeyedCollection baseAddresses) +82 System.ServiceModel.Activities.WorkflowServiceHost.InitializeFromConstructor(WorkflowService serviceDefinition, Uri[] baseAddresses) +206 System.ServiceModel.Activities.Activation.WorkflowServiceHostFactory.CreateWorkflowServiceHost(WorkflowService service, Uri[] baseAddresses) +43 System.ServiceModel.Activities.Activation.WorkflowServiceHostFactory.CreateServiceHost(String constructorString, Uri[] baseAddresses) +974 System.ServiceModel.HostingManager.CreateService(String normalizedVirtualPath) +1423 System.ServiceModel.HostingManager.ActivateService(String normalizedVirtualPath) +50 System.ServiceModel.HostingManager.EnsureServiceAvailable(String normalizedVirtualPath) +1132 [ServiceActivationException: The service '/HRApplicationServices/SubmitApplication.xamlx' cannot be activated due to an exception during compilation. The exception message is: Two different contracts have the same ConfigurationName..] System.Runtime.AsyncResult.End(IAsyncResult result) +889824 System.ServiceModel.Activation.HostedHttpRequestAsyncResult.End(IAsyncResult result) +179150 System.Web.AsyncEventExecutionStep.OnAsyncEventCompletion(IAsyncResult ar) +107 Can anyone tell me what I'm doing wrong? I haven't configured any of the bindings myself. The BasicHttpBinding is what you get by default in .NET 4 when hosting a service inside a web application. The other bindings are configured by AppFabric. I can't find their configuration anywhere. Kind regards, Ronald Wildenberg

  Read the article

• Most useful free .NET libraries?

  - by Binoj Antony

  I have used a lot of free .NET libraries, some from Microsoft itself! Which ones have you found the most useful? Dependency Injection/Inversion of Control Unity Framework - Microsoft StructureMap - Jeremy Miller Castle Windsor NInject Spring Framework Autofac Managed Extensibility Framework Logging Logging Application Block - Microsoft Log4Net - Apache Error Logging Modules and Handlers(ELMAH) NLog Compression SharpZipLib DotNetZip YUI Compressor (CSS and JS compression/minification) AjaxMinifier (in other downloads) (JS compression. Also includes MSBuild task) Ajax Ajax Control Toolkit - Microsoft AJAXNet Pro Data Mapper XmlDataMapper AutoMapper ORM NHibernate Castle ActiveRecord Subsonic XmlDataMapper Charting/Graphics Microsoft Chart Controls for ASP.NET 3.5 SP1 Microsoft Chart Controls for Winforms ZedGraph Charting NPlot - Charting for ASP.NET and WinForms PDF Creators/Generators PDFsharp iTextSharp Unit Testing/Mocking NUnit Rhino Mocks Moq TypeMock.Net xUnit.net mbUnit Machine.Specifications Automated Web Testing Selenium Watin URL Rewriting url rewriter UrlRewriting.Net Url Rewriter and Reverse Proxy - Managed Fusion Controls Krypton - Free winform controls Source Grid - A Grid control Devexpress - free controls Unclassified CSLA Framework - Business Objects Framework AForge.net - AI, computer vision, genetic algorithms, machine learning Enterprise Library 4.1 - Logging, Exception Management, Validation, Policy Injection File helpers library C5 Collections - Collections for .NET Quartz.NET - Enterprise Job Scheduler for .NET Platform MiscUtil - Utilities by Jon Skeet Lucene.net - Text indexing and searching Json.NET - Linq over JSON Flee - expression evaluator PostSharp - AOP IKVM - brings the extensive world of Java libraries to .NET. Title of the question taken from here. [EDIT] Please provide links to these free libraries as well. Once we have a huge list of this, it can be arranged in categories! Please do not mention .NET Applications/EXEs here.

  Read the article

• Unable to debug WCF service in VS2008 after UserNamePasswordValidator fault

  - by lsb

  Hi! I have a WCF service that I secure with a custom UserNamePasswordValidator and Message security running over wsHttpBinding. The release code works great. Unfortunately, when I try to run in debug mode after having previously used invalid credentials (the current credentials ARE valid!) VS2008 displays an annoying dialog box (more on this below). A simplified version of my Validate method from the validator might look like the following: public override void Validate(string userName, string password) { if (password != "ABC123") throw new FaultException("The password is invalid!"); } The client receives a MessageSecurityException with InnerException set to the FaultException I explictly threw. This is workable since my client can display the message text of the original FaultException I wanted the user to see. Unfortunately, in all subsequent service calls VS2008 displays an "Unable to automatically debug..." dialog. The only way I can stop this from happening is to exit VS2008, get back in and connect to my service using correct credentials. I should also add that this occurs even when I create a brand new proxy on each and every call. There's no chance MY channel is faulted when I make a call. Its likely, however, that VS2008 hangs on to the previously faulted channel and tries to use it for debugging purposes. Needless to say, this sucks! The entire reason I'm entering "bad" credentials is to test the "bad-credential" handling. Anyway, if anyone has any ideas as to how I can get around this bug (?!?) I'd be very very appreciative....

  Read the article

• Using IIS Application Request Routing (ARR) for ASP.NET MVC

  - by Malcolm Frexner

  I use a simple ASP.NET MVC web (the template you use when you create a new site) and the web works as expected in my live environment. I now try to use IIS Application Request Routing version 2. I have a rule that send all reuqests to a different server that match a rule. The settings are a bit like this: http://blogs.iis.net/wonyoo/archive/2008/07/09/application-request-routing-arr-as-a-reverse-proxy.aspx My rule is just a bit different it is /shop(.*). Only requests that contain shop are send to a different server. I have to use rewrite, not redirect (The same as in the Picture) This works as long as the web the original requests go to is no ASP.NET MVC web. I tried to use a plain htm file in the webfolder and it worked. If put a compiled ASP.NET application into the webfolder it worked. But as soon as I put an ASP.NET MVC web into the folder, request arr served by this application. My understanding is that the ARR should kick in before the web application gets the chance to handle the request. Did anybody use ARR sucessfully as a reverse proxy for a ASP.NET MVC web? EDIT Here is the resulting web config when the rewrite roule is entered. With this rule I get a 404 that indicates that the rule is not used. <?xml version="1.0" encoding="UTF-8"?> <configuration> <configSections> <sectionGroup name="system.web.extensions" type="System.Web.Configuration.SystemWebExtensionsSectionGroup, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"> <sectionGroup name="scripting" type="System.Web.Configuration.ScriptingSectionGroup, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"> <section name="scriptResourceHandler" type="System.Web.Configuration.ScriptingScriptResourceHandlerSection, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" requirePermission="false" allowDefinition="MachineToApplication" /> <sectionGroup name="webServices" type="System.Web.Configuration.ScriptingWebServicesSectionGroup, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"> <section name="jsonSerialization" type="System.Web.Configuration.ScriptingJsonSerializationSection, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" requirePermission="false" allowDefinition="Everywhere" /> <section name="profileService" type="System.Web.Configuration.ScriptingProfileServiceSection, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" requirePermission="false" allowDefinition="MachineToApplication" /> <section name="authenticationService" type="System.Web.Configuration.ScriptingAuthenticationServiceSection, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" requirePermission="false" allowDefinition="MachineToApplication" /> <section name="roleService" type="System.Web.Configuration.ScriptingRoleServiceSection, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" requirePermission="false" allowDefinition="MachineToApplication" /> </sectionGroup> </sectionGroup> </sectionGroup> </configSections> <appSettings /> <connectionStrings> <add name="ApplicationServices" connectionString="data source=.\SQLEXPRESS;Integrated Security=SSPI;AttachDBFilename=|DataDirectory|aspnetdb.mdf;User Instance=true" providerName="System.Data.SqlClient" /> </connectionStrings> <system.web> <!-- Set compilation debug="true" to insert debugging symbols into the compiled page. Because this affects performance, set this value to true only during development. --> <compilation debug="false"> <assemblies> <add assembly="System.Core, Version=3.5.0.0, Culture=neutral, PublicKeyToken=B77A5C561934E089" /> <add assembly="System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" /> <add assembly="System.Web.Abstractions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" /> <add assembly="System.Web.Routing, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" /> <add assembly="System.Web.Mvc, Version=1.0.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" /> <add assembly="System.Data.DataSetExtensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=B77A5C561934E089" /> <add assembly="System.Xml.Linq, Version=3.5.0.0, Culture=neutral, PublicKeyToken=B77A5C561934E089" /> <add assembly="System.Data.Linq, Version=3.5.0.0, Culture=neutral, PublicKeyToken=B77A5C561934E089" /> </assemblies> </compilation> <!-- The <authentication> section enables configuration of the security authentication mode used by ASP.NET to identify an incoming user. --> <authentication mode="Forms"> <forms loginUrl="~/Account/LogOn" timeout="2880" /> </authentication> <membership> <providers> <clear /> <add name="AspNetSqlMembershipProvider" type="System.Web.Security.SqlMembershipProvider, System.Web, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" connectionStringName="ApplicationServices" enablePasswordRetrieval="false" enablePasswordReset="true" requiresQuestionAndAnswer="false" requiresUniqueEmail="false" passwordFormat="Hashed" maxInvalidPasswordAttempts="5" minRequiredPasswordLength="6" minRequiredNonalphanumericCharacters="0" passwordAttemptWindow="10" passwordStrengthRegularExpression="" applicationName="/" /> </providers> </membership> <profile> <providers> <clear /> <add name="AspNetSqlProfileProvider" type="System.Web.Profile.SqlProfileProvider, System.Web, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" connectionStringName="ApplicationServices" applicationName="/" /> </providers> </profile> <roleManager enabled="false"> <providers> <clear /> <add connectionStringName="ApplicationServices" applicationName="/" name="AspNetSqlRoleProvider" type="System.Web.Security.SqlRoleProvider, System.Web, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" /> <add applicationName="/" name="AspNetWindowsTokenRoleProvider" type="System.Web.Security.WindowsTokenRoleProvider, System.Web, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" /> </providers> </roleManager> <!-- The <customErrors> section enables configuration of what to do if/when an unhandled error occurs during the execution of a request. Specifically, it enables developers to configure html error pages to be displayed in place of a error stack trace. <customErrors mode="RemoteOnly" defaultRedirect="GenericErrorPage.htm"> <error statusCode="403" redirect="NoAccess.htm" /> <error statusCode="404" redirect="FileNotFound.htm" /> </customErrors> --> <pages> <controls> <add tagPrefix="asp" namespace="System.Web.UI" assembly="System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" /> <add tagPrefix="asp" namespace="System.Web.UI.WebControls" assembly="System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" /> </controls> <namespaces> <add namespace="System.Web.Mvc" /> <add namespace="System.Web.Mvc.Ajax" /> <add namespace="System.Web.Mvc.Html" /> <add namespace="System.Web.Routing" /> <add namespace="System.Linq" /> <add namespace="System.Collections.Generic" /> </namespaces> </pages> <httpHandlers> <remove verb="*" path="*.asmx" /> <add verb="*" path="*.asmx" validate="false" type="System.Web.Script.Services.ScriptHandlerFactory, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" /> <add verb="*" path="*_AppService.axd" validate="false" type="System.Web.Script.Services.ScriptHandlerFactory, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" /> <add verb="GET,HEAD" path="ScriptResource.axd" type="System.Web.Handlers.ScriptResourceHandler, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" validate="false" /> <add verb="*" path="*.mvc" validate="false" type="System.Web.Mvc.MvcHttpHandler, System.Web.Mvc, Version=1.0.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" /> </httpHandlers> <httpModules> <add name="ScriptModule" type="System.Web.Handlers.ScriptModule, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" /> <add name="UrlRoutingModule" type="System.Web.Routing.UrlRoutingModule, System.Web.Routing, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" /> </httpModules> </system.web> <system.codedom> <compilers> <compiler language="c#;cs;csharp" extension=".cs" warningLevel="4" type="Microsoft.CSharp.CSharpCodeProvider, System, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089"> <providerOption name="CompilerVersion" value="v3.5" /> <providerOption name="WarnAsError" value="false" /> </compiler> <compiler language="vb;vbs;visualbasic;vbscript" extension=".vb" warningLevel="4" type="Microsoft.VisualBasic.VBCodeProvider, System, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089"> <providerOption name="CompilerVersion" value="v3.5" /> <providerOption name="OptionInfer" value="true" /> <providerOption name="WarnAsError" value="false" /> </compiler> </compilers> </system.codedom> <system.web.extensions /> <!-- The system.webServer section is required for running ASP.NET AJAX under Internet Information Services 7.0. It is not necessary for previous version of IIS. --> <system.webServer> <rewrite> <rules> <rule name="shop" stopProcessing="true"> <match url="^shop/([_0-9a-z-.]+)" /> <action type="Rewrite" url="article.aspx?title={R:1}" logRewrittenUrl="true" /> </rule> </rules> </rewrite> <validation validateIntegratedModeConfiguration="false" /> <modules runAllManagedModulesForAllRequests="true"> <remove name="ScriptModule" /> <remove name="UrlRoutingModule" /> <add name="ScriptModule" preCondition="managedHandler" type="System.Web.Handlers.ScriptModule, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" /> <add name="UrlRoutingModule" type="System.Web.Routing.UrlRoutingModule, System.Web.Routing, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" /> </modules> <handlers> <remove name="WebServiceHandlerFactory-Integrated" /> <remove name="ScriptHandlerFactory" /> <remove name="ScriptHandlerFactoryAppServices" /> <remove name="ScriptResource" /> <remove name="MvcHttpHandler" /> <remove name="UrlRoutingHandler" /> <add name="ScriptHandlerFactory" verb="*" path="*.asmx" preCondition="integratedMode" type="System.Web.Script.Services.ScriptHandlerFactory, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" /> <add name="ScriptHandlerFactoryAppServices" verb="*" path="*_AppService.axd" preCondition="integratedMode" type="System.Web.Script.Services.ScriptHandlerFactory, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" /> <add name="ScriptResource" preCondition="integratedMode" verb="GET,HEAD" path="ScriptResource.axd" type="System.Web.Handlers.ScriptResourceHandler, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" /> <add name="MvcHttpHandler" preCondition="integratedMode" verb="*" path="*.mvc" type="System.Web.Mvc.MvcHttpHandler, System.Web.Mvc, Version=1.0.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" /> <add name="UrlRoutingHandler" preCondition="integratedMode" verb="*" path="UrlRouting.axd" type="System.Web.HttpForbiddenHandler, System.Web, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" /> </handlers> </system.webServer> </configuration>

  Read the article

• Automapper -cannot resolve the Generic List

  - by chugh97

  Mapper.CreateMap<BusinessObject, Proxy.DataContacts.DCObject>() .ForMember(x => x.ExtensionData, y => y.Ignore()) .ForMember(z => z.ValidPlaces, a=> a.ResolveUsing(typeof(ValidPlaces))); Mapper.AssertConfigurationIsValid(); public class BusinessObject { public Enum1 Enum1 { get; set; } public List<ValidPlaces> ValidPlaces{ get; set; } } public class ValidPlaces { public int No { get; set; } public string Name { get; set; } } public class DCObject { [DataMember] public Enum1 Enum1 { get; set; } [DataMember] public List<ValidPlaces> ValidPlaces{ get; set; } } Mapper.CreateMap works find when Mapper.AssertConfigurationIsValid(); is called but when I actually call into the service the Automapper throws and excetion saying ValidPlaces could not be mapped.Works fine if I put Ignore() but ideally want that passed.Any AutoMapper experts out there pls help.

  Read the article

• NHibernate.Bytecode.UnableToLoadProxyFactoryFactoryException

  - by Shane

  I have the following code set up in my Startup IDictionary properties = new Dictionary(); properties.Add("connection.driver_class", "NHibernate.Driver.SqlClientDriver"); properties.Add("dialect", "NHibernate.Dialect.MsSql2005Dialect"); properties.Add("proxyfactory.factory_class", "NNHibernate.ByteCode.Castle.ProxyFactoryFactory, NHibernate.ByteCode.Castle"); properties.Add("connection.provider", "NHibernate.Connection.DriverConnectionProvider"); properties.Add("connection.connection_string", "Data Source=ZEUS;Initial Catalog=mydb;Persist Security Info=True;User ID=sa;Password=xxxxxxxx"); InPlaceConfigurationSource source = new InPlaceConfigurationSource(); source.Add(typeof(ActiveRecordBase), (IDictionary<string, string>) properties); Assembly asm = Assembly.Load("Repository"); Castle.ActiveRecord.ActiveRecordStarter.Initialize(asm, source); I am getting the following error: failed: NHibernate.Bytecode.UnableToLoadProxyFactoryFactoryException : Unable to load type 'NNHibernate.ByteCode.Castle.ProxyFactoryFactory, NHibernate.ByteCode.Castle' during configuration of proxy factory class. Possible causes are: - The NHibernate.Bytecode provider assembly was not deployed. - The typeName used to initialize the 'proxyfactory.factory_class' property of the session-factory section is not well formed. I have read and read I am referecning the All the assemblies listed and I am at a total loss as what to try next. Castle.ActiveRecord.dll Castle.DynamicProxy2.dll Iesi.Collections.dll log4net.dll NHibernate.dll NHibernate.ByteCode.Castle.dll I am 100% sure the assembly is in the bin. Anyone have any ideas?

  Read the article

• Autofac WCF integration + sessions

  - by Michael Sagalovich

  I am having an ASP.NET MVC 3 application that collaborates with a WCF service, which is hosted using Autofac host factory. Here are some code samples: .svc file: <%@ ServiceHost Language="C#" Debug="true" Service="MyNamespace.IMyContract, MyAssembly" Factory="Autofac.Integration.Wcf.AutofacServiceHostFactory, Autofac.Integration.Wcf" %> Global.asax of the WCF service project: protected void Application_Start(object sender, EventArgs e) { ContainerBuilder builder = new ContainerBuilder(); //Here I perform all registrations, including implementation of IMyContract AutofacServiceHostFactory.Container = builder.Build(); } Client proxy class constructor (MVC side): ContainerBuilder builder = new ContainerBuilder(); builder.Register(c => new ChannelFactory<IMyContract>( new BasicHttpBinding(), new EndpointAddress(Settings.Default.Url_MyService))) .SingleInstance(); builder.Register(c => c.Resolve<ChannelFactory<IMyContract>>().CreateChannel()) .UseWcfSafeRelease(); _container = builder.Build(); This works fine until I want WCF service to allow or require sessions ([ServiceContract(SessionMode = SessionMode.Allowed)], or [ServiceContract(SessionMode = SessionMode.Required)]) and to share one session with the MVC side. I changed the binding to WSHttpBinding on the MVC side, but I am having different exceptions depending on how I tune it. I also tried changing AutofacServiceHostFactory to AutofacWebServiceHostFactory, with no result. I am not using config file as I am mainly experimenting, not developing real-life application, but I need to study the case. But if you think I can achieve what I need only with config files, then OK, I'll use them. I will provide exception details for each combination of settings if required, I'm omitting them not to make the post too large. Any ideas on what I can do?

  Read the article

• Ext.data.Store, Javascript Arrays and Ext.grid.ColumnModel

  - by Michael Wales

  I am using Ext.data.Store to call a PHP script which returns a JSON response with some metadata about fields that will be used in a query (unique name, table, field, and user-friendly title). I then loop through each of the Ext.data.Record objects, placing the data I need into an array (this_column), push that array onto the end of another array (columns), and eventually pass this to an Ext.grid.ColumnModel object. The problem I am having is - no matter which query I am testing against (I have a number of them, varying in size and complexity), the columns array always works as expected up to columns[15]. At columns[16], all indexes from that point and previous are filled with the value of columns[15]. This behavior continues until the loop reaches the end of the Ext.data.Store object, when the entire arrays consists of the same value. Here's some code: columns = []; this_column = []; var MetaData = Ext.data.Record.create([ {name: 'id'}, {name: 'table'}, {name: 'field'}, {name: 'title'} ]); // Query the server for metadata for the query we're about to run metaDataStore = new Ext.data.Store({ autoLoad: true, reader: new Ext.data.JsonReader({ totalProperty: 'results', root: 'fields', id: 'id' }, MetaData), proxy: new Ext.data.HttpProxy({ url: 'index.php/' + type + '/' + slug }), listeners: { 'load': function () { metaDataStore.each(function(r) { this_column['id'] = r.data['id']; this_column['header'] = r.data['title']; this_column['sortable'] = true; this_column['dataIndex'] = r.data['table'] + '.' + r.data['field']; // This display valid information, through the entire process console.info(this_column['id'] + ' : ' + this_column['header'] + ' : ' + this_column['sortable'] + ' : ' + this_column['dataIndex']); columns.push(this_column); }); // This goes nuts at columns[15] console.info(columns); gridColModel = new Ext.grid.ColumnModel({ columns: columns });

  Read the article

• Injecting Mockito mocks into a Spring bean

  - by teabot

  I would like to inject a Mockito mock object into a Spring (3+) bean for the purposes of unit testing with JUnit. My bean dependencies are currently injected by using the @Autowired annotation on private member fields. I have considered using ReflectionTestUtils.setField but the bean instance that I wish to inject is actually a proxy and hence does not declare the private member fields of the target class. I do not wish to create a public setter to the dependency as I will then be modifying my interface purely for the purposes of testing. I have followed some advice given by the Spring community but the mock does not get created and the auto-wiring fails: <bean id="dao" class="org.mockito.Mockito" factory-method="mock"> <constructor-arg value="com.package.Dao" /> </bean> The error I currently encounter is as follows: ... Caused by: org...NoSuchBeanDefinitionException: No matching bean of type [com.package.Dao] found for dependency: expected at least 1 bean which qualifies as autowire candidate for this dependency. Dependency annotations: { @org...Autowired(required=true), @org...Qualifier(value=dao) } at org...DefaultListableBeanFactory.raiseNoSuchBeanDefinitionException(D...y.java:901) at org...DefaultListableBeanFactory.doResolveDependency(D...y.java:770) If I set the constructor-arg value to something invalid no error occurs when starting the application context.

  Read the article

• Failed sending bytes array to JAX-WS web service on Axis

  - by user304309

  Hi I have made a small example to show my problem. Here is my web-service: package service; import javax.jws.WebMethod; import javax.jws.WebService; @WebService public class BytesService { @WebMethod public String redirectString(String string){ return string+" - is what you sended"; } @WebMethod public byte[] redirectBytes(byte[] bytes) { System.out.println("### redirectBytes"); System.out.println("### bytes lenght:" + bytes.length); System.out.println("### message" + new String(bytes)); return bytes; } @WebMethod public byte[] genBytes() { byte[] bytes = "Hello".getBytes(); return bytes; } } I pack it in jar file and store in "axis2-1.5.1/repository/servicejars" folder. Then I generate client Proxy using Eclipse for EE default utils. And use it in my code in the following way: BytesService service = new BytesServiceProxy(); System.out.println("Redirect string"); System.out.println(service.redirectString("Hello")); System.out.println("Redirect bytes"); byte[] param = { (byte)21, (byte)22, (byte)23 }; System.out.println(param.length); param = service.redirectBytes(param); System.out.println(param.length); System.out.println("Gen bytes"); param = service.genBytes(); System.out.println(param.length); And here is what my client prints: Redirect string Hello - is what you sended Redirect bytes 3 0 Gen bytes 5 And on server I have: ### redirectBytes ### bytes lenght:0 ### message So byte array can normally be transfered from service, but is not accepted from the client. And it works fine with strings. Now I use Base64Encoder, but I dislike this solution.

  Read the article

< Previous Page | 202 203 204 205 206 207 208 209 210 211 212 213  | Next Page >