Search Results

Search found 22871 results on 915 pages for 'automated install'.

Page 207/915 | < Previous Page | 203 204 205 206 207 208 209 210 211 212 213 214  | Next Page >

  • Unity isn't starting on 13.10 (with Cinnamon 2.0 installed)

    - by Sam Pearman
    Since upgrading to 13.10, I can't log in to unity desktop. Light dm works correctly, but attempting to log in tries to start the session then drops back to light. I've already dropped to terminal (ctrl+alt+f2) and done this: sudo apt-get update sudo apt-get install --reinstall ubuntu-desktop sudo apt-get install unity Logging in as a guest session also fails. Logging in to other window managers works with varying degrees of success. Note: I have Cinnamon 2.0 installed from PPA. I'm using a 2 monitor setup. Also of note is that the session prior to my upgrade to 13.10 the background of unity failed to display at all, instead showing what was there in the screen buffer from the previous frame. The entire OS worked correctly otherwise though, so I just ignored it for the session. No other upgrades or even updates were done prior to this occurring. My upgrade path to 13.10 was basically this: Install 13.04 alongside Windows 7, use ubuntu as a glorified web browser for a while, get updates (in preparation for 13.10), install 13.10. I also used Unity Tweak Tool to change some aspects of unity, particularly auto-hide. Any help or ideas would be appreciated, as I'm typing this on my phone :(

    Read the article

  • Good OS (gOS) instalation from USB key

    - by Peter Stegnar
    I would like to install Good OS from USB key. I have found a nice instructions http://www.pendrivelinux.com/usb-gos-install-from-windows/. Everything is OK while USB key is being prepared. But when I am trying to boot from that USB key I get the following error: "no bootable partition in table" It seems like USB key is not prepared properly ... How can I install gOS from USB key?

    Read the article

  • Problems installing Ubuntu on a vaio with SSD, GRUB installation failure

    - by Alberto
    I have installed and used Ubuntu in several computers. But now I have a problem that I don't know how to solve. I have a Vaio (Product name: vpcz13c5e), it has a SSD 128gb. I decided to install Ubuntu (12.04, but I have tried older versions as well). Firstly, I tested with live USB, and everything was fine, so I decided go for the complete installation. Then everything went as follows: I chose to use the whole disk (first option, formatting everything). I got a message Executing 'grub-install' /deb/sdb failed. This is a fatal error After clicking ok I got another window with 3 options: the first offers different devices to install the bootloader on (I tried all of them and none works). Second option: Continue without a bootloader. In that case I got You will need to manually install a bootloader in order to start Ubuntu The third option is Cancel the installation. So, I chose Continue without a bootloader. Then I restart the computer (with the Live cd) and in a terminal type sudo fdisk -l but I obtain fdisk: unable to seek on /dev/sda: Invalid argument What can I do? any help will be appreciated.

    Read the article

  • Possible to host CentOS netinstall files on a local HTTP/FTP?

    - by garlicman
    I'm running XenServer on an Dell R610 and am running into a catch-22. During install from DVD, CentOS can't find the DVD package catalogue. It's a reported error for some, XenServer + CentOS6 + DVD install in some hardware configurations = failed install. Yes, I checked the MD5 and let the disc test pass. In every reported case, the netinstall was the solution. The issue is my net access is required to go through a web proxy that prompts before you can download a file. This naturally breaks any download automation. I've been waiting on our IT to put in an exception rule to allow my lab to bypass the prompt, but it's been over 3 weeks now and they don't seem responsive. (I've been working on this a day or two a week) I want to try and host the netinstall files local in my Xen network. Right now I only have a bunch of Windows based VMs, CentOS won't install so I don't have any Linux tools. I had tried simply hosting all the DVD contents off one of the Windows servers using Mongoose. (I didn't want to setup IIS) I copied them to a hosted sub-directory similar to all the mirrors out there (e.g. http:///centos/6.2/os/i386/) with no auth or anything. Then in the netinstall I correctly pointed to it. I now realize just copying the DVD files over won't work. The repodata will point to a local device, not the site I'm hosting. (e.g. the DVD repodata includes xml that points to where the packages are) Clearly I'm hosting them over HTTP, not from a DVD. Is there an easy way to sort this out? I'm just trying to install CentOS6 on Xen. If there's a turnkey downloadable Xen image with CentOS 6.2 on it, or a downloadable repo image, I'll take that too! Thank you in advance!

    Read the article

  • problems with installation of ubuntu 12.04 (64 and 32 bits)

    - by user76104
    I am a latinoamerican so.. sorry for my english I am trying to install ubuntu on my new pc but I have serious problems. When I put the installation cd and it runs, everything goes fine until that "window" when the user have to decide if want to try ubuntu or install it on the machine.. well that "window" apears in blank, and I see that my mouse and my keyboard turn really slowly and I can't do anything I have to shut it down by pressing power botton. The specification of my pc are this Gigabyte ex58 ud7 i7 950 wester digital caviar black 6gb memory corsair evga gtx580 Please i really neeed to install ubuntu or another linux distrubution, i am usign de sismic unix program on my laptop and well. it burns when i program a script! help! please :) what can i do..? what i have to download? i am not a pro in linux so please :( be pattient with me when it starts to load the achieve ubuntu environment to enter a menu with a graphical environment but I managed to get something sturdy and gave him to try ubuntu, started to load but freezes on the sign of ubuntu with red spots and only shows me the pointer not more ..... any other option? ps: had previously tried to install the alternate version of ubuntu not having success: S

    Read the article

  • Getting Wireless working on Dell Inspiron 1545 in Ubuntu 10.04?

    - by Dexter
    I'm trying to install my wireless drivers (which uses a broadcom card). I tried to install them using the restricted drivers offered on my Ubuntu CD. However when I clicked activate it got about halfway through the install process before it gave me this error message: SystemError: installArchives() failed How can I correct this?

    Read the article

  • Triple Boot with Windows 7, Windows 7 and Ubuntu

    - by BillJeansk
    Hello, currently I have dual boot with 2 windows 7. (dont ask why, long story, I need them for each with different settings involving Audio Recording) I am very keen to install the new Ubuntu and get into a new OS, out of interest but I don't want to mess with my current 2 windows installations? If I install Ubuntu, will this simply add to my list of OS boot options when you set it, like I did when I install my 2nd Windows 7 Any comments or help would be great? Thanks Bill

    Read the article

  • Problem upgrading kernel on debian 3.1

    - by exhuma
    Hi, I have a quite old box in a remote server farm. So I have no direct access. Only remote SSH (and via SSH to a serial console). I haven't updated this box in ages. Now, whenever I want to install a new package, a dependency to glibc appears. Unfortunately, the install of glibc depends on a 2.6 kernel and I am running a venerable 2.4 kernel (one more reason to upgrade). The problem is, that the install of a new kernel has an indirect (over locales) dependency to glibc. So, to install glibc, I need a new kernel. For a new kernel, I need to upgrade glibc. Essentially I am blocked. What's the best way to proceed considering I have no "hardware" access? Here's a quick transcript of the upgrade process: [green:~]% sudo aptitude install linux-image-686 Reading Package Lists... Done Building Dependency Tree Reading extended state information Initializing package states... Done Reading task descriptions... Done The following packages are unused and will be REMOVED: gcc-4.3-base The following NEW packages will be automatically installed: dash libc6-i686 libparse-recdescent-perl linux-image-2.6-686 linux-image-2.6.18-6-686 module-init-tools yaird The following packages have been kept back: adduser apache2 apache2-mpm-prefork apache2-utils apache2.2-common apt apt-utils aptitude autoconf autotools-dev awstats base-files base-passwd [...snip...] util-linux vacation vim vim-common wamerican wbritish wget whiptail whois wwwconfig-common zlib1g The following NEW packages will be installed: dash libc6-i686 libparse-recdescent-perl linux-image-2.6-686 linux-image-2.6.18-6-686 linux-image-686 module-init-tools yaird The following packages will be upgraded: hotplug libc6 2 packages upgraded, 8 newly installed, 1 to remove and 277 not upgraded. Need to get 0B/22.7MB of archives. After unpacking 52.1MB will be used. Do you want to continue? [Y/n/?] Writing extended state information... Done Preconfiguring packages ... (Reading database ... 34065 files and directories currently installed.) Preparing to replace libc6 2.3.6.ds1-13 (using .../libc6_2.7-18lenny2_i386.deb) ... Checking for services that may need to be restarted... Checking init scripts... WARNING: init script for postgresql not found. [ --- libc6 config screen appears here --- ] WARNING: POSIX threads library NPTL requires kernel version 2.6.8 or later. If you use a kernel 2.4, please upgrade it before installing glibc. The installation of a 2.6 kernel _could_ ask you to install a new libc first, this is NOT a bug, and should *NOT* be reported. In that case, please add etch sources to your /etc/apt/sources.list and run: apt-get install -t etch linux-image-2.6 Then reboot into this new kernel, and proceed with your upgrade dpkg: error processing /var/cache/apt/archives/libc6_2.7-18lenny2_i386.deb (--unpack): subprocess pre-installation script returned error exit status 1 Errors were encountered while processing: /var/cache/apt/archives/libc6_2.7-18lenny2_i386.deb E: Sub-process /usr/bin/dpkg returned an error code (1) Ack! Something bad happened while installing packages. Trying to recover: dpkg: dependency problems prevent configuration of locales: locales depends on glibc-2.7-1; however: Package glibc-2.7-1 is not installed. dpkg: error processing locales (--configure): dependency problems - leaving unconfigured Errors were encountered while processing: locales Reading Package Lists... Done Building Dependency Tree Reading extended state information Initializing package states... Done Reading task descriptions... Done Now, if I follow the instrunctions as promted I get the following. Note that I am using aptitude instead of apt-get to benefit from the better dependency tracking. I did try with apt-get first. But that let me to the same problem. [green:~]% sudo aptitude install -t etch linux-image-2.6.26-2-686 Reading Package Lists... Done Building Dependency Tree Reading extended state information Initializing package states... Done Reading task descriptions... Done E: Unable to correct problems, you have held broken packages. E: Unable to correct dependencies, some packages cannot be installed E: Unable to resolve some dependencies! Some packages had unmet dependencies. This may mean that you have requested an impossible situation or if you are using the unstable distribution that some required packages have not yet been created or been moved out of Incoming. The following packages have unmet dependencies: linux-image-2.6.26-2-686: Depends: initramfs-tools (>= 0.55) but it is not installable or yaird (>= 0.0.13) but it is not installable or linux-initramfs-tool which is a virtual package. Any ideas?

    Read the article

  • forcing upgrade or how to upgrade packages after update failed

    - by Orosjopie
    How do I continue upgrade or fix upgrade as upgrading in 13.04 to 13.10 failed. I'm currently running terminal in restore mode. I get the error unmet dependencies, but tried to install apt-get -f install, but get this error: unable to fetch some archives. using apt-get update also brings errors for example: failed to fetch http: archive.canonical.com/ubuntu/dists/quantal/release.gpg Could not resolve 'archive.canonical.com. Is it my internet connection? Its currently connected via a network cable and internet is on other computers. If internet on my ubuntu 13.10, how do I switch it on? or how can fix my upgrade problem that I can boot ubuntu normal, backup, then format and reload ubuntu 13.10 properly? I posted this problem that has also linked to this problem I mentioned: upgrading to ubuntu 13.10 failed/crashed. I did manager to install/upgrade some of the files and got ubuntu 13.10 to reboot, but not 100%, as it is slow and the unity desktop is not showing 100%. in trying some of the commands online, I get the error that the activity manager is not installed, when trying to install it, it conflicts with activity-log-manager-common. Please assist.

    Read the article

  • How to fix a dpkg broken by the Brother MFC-7340 deb driver

    - by Roman A. Taycher
    I'm getting an apt-get error that says E: The package brmfc7340lpr needs to be reinstalled, but I can't find an archive for it. (the brmfc7340lpr is a printer driver) its a local deb file, doing an dpkg or apt-get purge doesn't work, neither does apt-get install -f How do I reinstall a package from a local deb file? P.S. box-name% sudo apt-get upgrade [sudo] password for username: Reading package lists... Done Building dependency tree Reading state information... Done E: The package brmfc7340lpr needs to be reinstalled, but I can't find an archive for it. box-name% sudo apt-get purge brmfc7340lpr Reading package lists... Done Building dependency tree Reading state information... Done E: The package brmfc7340lpr needs to be reinstalled, but I can't find an archive for it. box-name% sudo dpkg --purge brmfc7340lpr dpkg: error processing brmfc7340lpr (--purge): Package is in a very bad inconsistent state - you should reinstall it before attempting a removal. Errors were encountered while processing: brmfc7340lpr box-name% sudo dpkg --install brmfc7340lpr-2.0.2-1.i386.deb Selecting previously deselected package brmfc7340lpr. (Reading database ... 725204 files and directories currently installed.) Preparing to replace brmfc7340lpr 2.0.2-1 (using .../brmfc7340lpr-2.0.2-1.i386.deb) ... Unpacking replacement brmfc7340lpr ... start: Unknown job: lpd dpkg: warning: subprocess old post-removal script returned error exit status 1 dpkg - trying script from the new package instead ... start: Unknown job: lpd dpkg: error processing brmfc7340lpr-2.0.2-1.i386.deb (--install): subprocess new post-removal script returned error exit status 1 start: Unknown job: lpd dpkg: error while cleaning up: subprocess new post-removal script returned error exit status 1 Errors were encountered while processing: brmfc7340lpr-2.0.2-1.i386.deb box-name% sudo apt-get install -f Reading package lists... Done Building dependency tree Reading state information... Done E: The package brmfc7340lpr needs to be reinstalled, but I can't find an archive for it. box-name%

    Read the article

  • Upgrade from Linux Mint 12 to Kubuntu 12.04?

    - by MountainX
    Is there an "easy" way to "upgrade" my existing Linux Mint 12 install to Kubuntu 12.04 beta 2? I know I could reinstall. Usually I would do a clean install to avoid unexpected issues. But in this case, I don't have time to reconfigure everything from my printers to my installed software, so I am looking for the quick/easy way, but I also want to avoid big risks of an upgrade gone wrong. I'm hoping to just change some repos and run a few commands from the terminal. I don't mind editing a few config files as long as I can find good HOWTOs. But I don't want to be the pioneer (arrows in back). I'm hoping someone has done this before and has a set of steps. For context, I recently installed KDE 4.8 SC onto Kubuntu 11.10 using PPAs. This was on another computer. That wasn't a problem. But I decided to do a fresh install of Kubuntu 12.04 later. I like it well enough that I want to change my other computer from Linux Mint 12 to Kubuntu. (I'm going all-in with KDE. It's now my desktop of choice.) This Linux Mint upgrade will be a move from Gnome and MGSE to KDE, so that will probably complicate things at bit compared to something like upgrading Kubuntu 11.10 to KDE 4.8. References: http://www.psychocats.net/ubuntu/kde Is it safe to install Kubuntu-desktop in 11.10?

    Read the article

  • NVIDIA Graphics - resolution problems with new 12.04 LTS installation

    - by Daveisuser56810
    I've been trying to install Ubuntu 12.04 LTS on my desktop most of the day. The desktop uses a NVIDIA GEFORCE 9800 (GT I think) graphics card. I am unable to set the correct resolution (1680 x 1050) for the display. The first problem I had was that of the "Black Screen" during install. I overcame this by utilising the "nomodeset" switch on the install options (once I'd found how to do that). The second problem of course was the "Black screen" following the first reboot. Once again this was overcome by using "nomodeset", this time by "editing" the GRUB. This gave me a resolution of 1280x768 which, the Displays GUI allowed me to change to 1280x720 (appears to fit on screen). I then tried to install the NVIDIA drivers. 1) using additional drivers 2) manually by downloading driver and installing in root As soon as NVIDIA drivers are installed - resolution become restricted to 640x480 (max). At this resolution Ubuntu GUI is not usable as most screens are larger than the display. Removing the NVIDIA driver and removing the XORG.CONF file does not lift this restriction. I have tried most things that I have found and that were vaguely intelligible, but nothing appears to get me closer to a resolution of 1680x1050. UPDATE: reinstalled Ubuntu 12-04 and used the "NoModeSet" in the Grub to restore the resolution to 1280x720, which is at least usable. Will live with this for now.

    Read the article

  • BSOD Error When Running Windows Phone Emulator

    - by Akshat Mittal
    I am getting a BSOD Error when Running Windows Phone 7.1 Emulator on Windows 7 Ultimate 64bit, Each time I run the Emulator, it Results in Blue Screen. This is a Fresh Install, This Error also Occurred with my last Windows Install (That is why I formatted the Windows Again), I have already Tried to Re-install it, it also shows "Windows Phone Emulator is Doing a Complete OS boot" (Even at Fresh Install, I know it happens when using Unlocked Emulator Images). I am not able to Test any of my app. Please Help !! EDIT: I am not Running a VM, it is on a Physical Machine.

    Read the article

  • Trouble installing Pokerstars on a Live USB without Persistence through WINE

    - by Ricky Foster
    I need to install any form of Texas Hold Em' on a Lubuntu Live USB that doesn't have persistence. I was able to download PokerStars.net by emulating the .exe (a windows type file) using WINE for Linux (Lubuntu). But, when I try to install, I have no room. The only place on the Live USB is in the root folder which is set to read-only. Is there any way I can change the read only properties of the Live USB while it's in use? So, to recap. I am running Lubuntu 13.04 and can't start in Persistent mode. When I start normally everything worked fine. I proceeded to Chromium and successfully downloaded Wine and the Pokerstars.exe. I right clicked the downloaded fiel then clicked Wine, the installer loaded fine. There are about 8 different disk icons and only the one containing system files is active. Is there any way I can use the terminal to install it to Root. Thanks in advance for your answer/alternate method (without having to buy another USB to install it to).

    Read the article

  • How to setup passwordless SSH access for root user

    - by Cerin
    I need to configure a machine so software installation can be automated remotely via SSH. Following the wiki, I was able to setup SSH keys so my user can access the machine without a password, but I still need to manually enter my password when I use sudo, which obviously an automated process shouldn't have to do. Although my /etc/ssh/sshd_config has PermitRootLogin yes, I can't seem to be able to login as root, presumably because it's not a "real" account with a separate password. How do I configure SSH keys, so a process can remotely login as root on Ubuntu?

    Read the article

  • StreamInsight Now Available Through Microsoft Update

    - by Roman Schindlauer
    We are pleased to announce that StreamInsight v1.1 is now available for automatic download and install via Microsoft Update globally. In order to enable agile deployment of StreamInsight solutions, you have asked of us a steady cadence of releases with incremental, but highly impactful features and product improvements. Following our StreamInsight 1.0 launch in Spring 2010, we offered StreamInsight 1.1 in Fall 2010 with implicit compatibility and an upgraded setup to support side by side installs. With this setup, your applications will automatically point to the latest runtime, but you still have the choice to point your application back to a 1.0 runtime if you choose to do so. As the next step, in order to enable timely delivery of our releases to you, we are pleased to announce the support for automatic download and install of StreamInsight 1.1 release via Microsoft Update starting this week. If you have a computer: that is subscribed to Microsoft Update (different from Windows Update) has StreamInsight 1.0 installed, and does not yet have StreamInsight 1.1 installed, Microsoft Update will automatically download and install the corresponding StreamInsight 1.1 update side by side with your existing StreamInsight 1.0 installation – across all supported 32-bit and 64-bit Windows operating systems, across 11 supported languages, and across StreamInsight client and server SKUs. This is also supported in WSUS environments, if all your updates are managed from a corporate server (please talk to the WSUS administrator in your enterprise). As an example, if you have SI Client 1.0 DEU and SI Server 1.0 ENU installed on the same computer, Microsoft Update will selectively download and side-by-side install just the SI Client 1.1 DEU and SI Server 1.1 ENU releases. Going forward, Microsoft Update will be our preferred mode of delivery – in addition to support for our download sites, and media based distribution where appropriate. Regards, The StreamInsight Team

    Read the article

  • Installation of Access Database Engine 32-bit Fails

    - by Rayzor78
    I am trying to install Access Database Engine 2007 32-bit. The splash screen comes up, you click "Next", then it fails with the error: Installation ended prematurely because of an error You click "OK" and another error window says: The installation of the package failed. The exact same situation happens when I try this with Access Database Engine 2010 32-bit. This production server is running Windows Server 2008 R2 SP1 64-bit. Before I tried installing Access Database Engine 32-bit, I first needed to install Microsoft Office 2010 Pro (Excel and Office Tools only). I tried the 32-bit version on the production server since that is how I set it up in our Dev environment. No luck. The 32-bit version would not install. I did NOT get the error "You have 64-bit components of Office installed". I simply received the exact same two errors listed above. So, I knew that 32-bit/64-bit did not really matter for the Office install for my project, so I installed 64-bit of Office Pro 2010 (Excel and Office Tools only) with no problems. I have a requirement that I need to have the 32-bit version of the Access Database Engine installed. 2007 or 2010, doesn't matter. I cannot use the 64-bit version of Access Database Engine 2010 because my SSIS package will not work with it. I require the 32-bit version. I've tried several steps to try to get it installed. I seriously think that the production server has some aversion to installing 32-bit applications. Here's what I've tried: Tried installing via command line with the "/passive" switch....no luck. Tried numerous iterations to copy the install file to the server (downloaded a fresh copy directly to the server, downloaded a fresh copy to my local machine then copied it over, copied it over zipped up) (http://social.msdn.microsoft.com/Forums/en-US/sqldataaccess/thread/efd3c1f0-07cd-45ca-a626-2dd0c7ac3e9f). Tried Method 1 from this link. Could not try Method 2 because it requires a server reboot and in my environment that requires a long change management process. I've verified that I am a local administrator on the server. (Evidence, I am able to install other applications (office 64-bit per above)). Verified that there are no other office products that should be blocking the installation. The fore-mentioned install of Excel 2010 64-bit was the first Office product installed on the server. VERY ODD: To test my theory that the production server does not like 32-bit applications, I installed something lightweight. I installed 7-Zip 32-bit on the production server with no problems whatsoever. Here are some things that I have not tried (i will follow-up once I do): Method 2 (as mentioned above). Requires a server reboot. Have not verified that the Dev and Production environments are 100% identical. I've done a cursory check and on the surface they appear to be the same (same OS and SP version). I need to do a deeper dive to be 100% certain. I had no problems in my Dev environment. In Dev, I installed Office 2010 Pro 64-bit (Excel & Office Tools only) then via command line w/ the "/passive" switch, installed Access Database Engine 2010 32-bit. I don't know what else to try. Any suggestions or comments?

    Read the article

  • Just installed 13.04 and everything is fine except I cannot connect to the internet. Any thoughts?

    - by razorccatu
    I just installed Ubuntu 13.04 on my HP G62 laptop and the install went smoothly. I did the install off of a USB drive after trying ubuntu. While I was testing it, I connected to my Wireless with out issue and surfed a little. After the install, no wireless. I can still connect to my wireless network (at least it tells me I'm connected at full strength) but No servers can be found. I attempted to ping Google to no avail and I attempted to ping my router to no avail. I tried to then hard wire the machine and once again it told me that I was connected but I was not. When I ran dmesg, I got the following message: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolvabe. Please install nss-hostname! Is the hostname the issue? if so, how do I resolve it with out internet connection? If it's not the issue, how do I move forward? Thanks for any help. EDIT. I forgot to attach the image of my ifconfig if that might help.

    Read the article

  • Installing Sharepoint 2007 on Windows Server 2008 R2

    - by ronischuetz
    we are using in our lab a clean installation of Windows Server 2008 R2 which is running as Hyper-V instance. Today we wanted to install a clean installation of Sharepoint 2007 with SP1 on this machine and we explorer an error that we are not able to install it. The setup is comes up with an error which is described here: http://support.microsoft.com/kb/962935 but this is not our szenario. A printscreen of this message can be found here: http://www.ronischuetz.com/images/SP_2007SP1_Inst_Error.png @Microsoft, my personal point of view is that it cannot be that we need to install first 2008, then Sharepoint 2007 with SP1, then SP2 and upgrade to 2008 R2. Nobody is going be happy with this solution and I hope we find a fast way how customers can install Sharepoint direclty on 2008 R2. Anyway, thanks in advance for any further information how we should go on with this issue. The issue is listed here: http://social.msdn.microsoft.com/Forums/en-US/sharepointadmin/thread/91a6be50-9009-43c8-a37c-66cfb83d738f

    Read the article

  • How to connect to a wireless network that has a two word name with a space?

    - by grinan
    Ok, I have searched for some time in earnest for an answer to this question. I have a Beagleboard which has Ubuntu 10.10 Minimal install for Arm running on it. With the default install, minimal tools, no GUI, I am unable to connect to my wireless network. The name of my network is "MYNAME NETWORK". Using a text editor to edit /etc/network/interfaces I can not seem to connect at all. As an experiment, I connected to a friends network, which has a one word name "dystek",and was able to connect with Zero issues, and update and install a full GUI for ubuntu Arm. The problem is that I don't want a full blown gui on the beagleboard, just a minimal install of ubuntu with CLI is all I need or want. Is there anyway to connect to my wireless network via editing the /etc/network/interfaces file. Surely there is... I just don't know how. Right now my interfaces file looks like this: auto lo iface lo inet loopback auto wlan0 iface wlan0 inet static address 192.168.1.200 netmask 255.255.255.0 gateway 192.168.1.1 wireless-essid BARRETT NETWORK wireless-key 46456xxxxxxxx Any help would be appreciated.

    Read the article

  • Upgrade OEM Windows 7 Pro to Windows 7 Enterprise

    - by user17111
    Our hardware vendor has sold us a laptop that comes with Windows 7 Pro OEM. Since we want Windows 7 Enterprise (for features like DirectAccess and BitLocker), the vendor has supplied us with a Software Assurance only license to upgrade OEM Win 7 Pro to Win 7 Ent. Do I need to install Windows 7 Enterprise Volume License media and re-install Windows, or is there a process to turn this existing Windows 7 Pro install into an "Enterprise" ?

    Read the article

  • Installing Numpy locally

    - by Néstor
    I posted this question originally on StackOverflow, but a user suggested I moved it here so here I go! I have an account in a remote computer without root permissions and I needed to install a local version of Python (the remote computer has a version of Python that is incompatible with some codes I have), Numpy and Scipy there. I've been trying to install numpy locally since yesterday, with no success. I successfully installed a local version of Python (2.7.3) in /home/myusername/.local/, so I access to this version of Python by doing /home/myusername/.local/bin/python. I tried two ways of installing Numpy: I downloaded the lastest stable version of Numpy from the official webpage, unpacked it, got into the unpacked folder and did: /home/myusername/.local/bin/python setup.py install --prefix=/home/myusername/.local. However, I get the following error, which is followed by a series of other errors (deriving from this one): gcc -pthread -shared build/temp.linux-x86_64-2.7/numpy/core/blasdot/_dotblas.o -L/usr/local/lib -Lbuild/temp.linux-x86_64-2.7 -lptf77blas -lptcblas -latlas -o build/lib.linux-x86_64-2.7/numpy/core/_dotblas.so /usr/bin/ld: /usr/local/lib/libptcblas.a(cblas_dptgemm.o): relocation R_X86_64_32 against `a local symbol' can not be used when making a shared object; recompile with -fPIC Not really knowing what this meant (except that the error apparently has to do with the LAPACK library), I just did the same command as above, but now putting LDFLAGS='-fPIC', as suggested by the error i.e., I did LDFLAGS="-fPIC" /home/myusername/.local/bin/python setup.py install --prefix=/home/myusername/.local. However, I got the same error (except that the prefix -fPIC was addeded after the gcc command above). I tried installing it using pip, i.e., doing /home/myusername/.local/bin/pip install numpy /after successfully instaling pip in my local path). However, I get the exact same error. I searched on the web, but none of the errors seemed to be similar to mine. My first guess is that this has to do with some piece of code that needs root permissions to be executed, or maybe with some problem with the version of the LAPACK libraries or with gcc (gcc version 4.1.2 is installed on the remote computer). Help, anyone?

    Read the article

  • Qmail Installation CentosI386

    - by tike
    I was trying to install qmailtoster in my centos server, i did all of the following not for once but repetitively as i got error and continued but i felt i need some help. i did follow all the steps of this wiki documentation. http://wiki.qmailtoaster.com/index.php/CentOS_5_QmailToaster_Install#Begin_Install followed all procedure when i came in a point to install i always got this error. cnt50-install-script.sh: line 80: rpmbuild: command not found error: File not found by glob: /usr/src/redhat/RPMS/i386/daemontools-toaster*.rpm Installing ucspi-tcp-toaster . . . Shall we continue? (yes, skip, quit) [y]/s/q: cnt50-install-script.sh.4: line 90: rpmbuild: command not found error: File not found by glob: /usr/src/redhat/RPMS/i386/ucspi-tcp-toaster*.rpm Installing vpopmail-toaster . . . Shall we continue? (yes, skip, quit) [y]/s/q: any suggestions please?

    Read the article

  • New SSD, is the MBR broken? DISK BOOT FAILURE

    - by Shevek
    I've been running Windows 7 on a WD 500gb SATA single drive, single partition setup for some time with no issues. I've just installed a new Kingston V Series 64gb SSD and performed a clean install of Win7 to it, deleting the partitions on the 500gb and using that as a data drive. All was well for a few reboots but then I started to get "DISK BOOT FAILURE, INSERT SYSTEM DISK AND PRESS ENTER" messages. If I put the Win7 install DVD back in the drive it boots fine. Tried a clean install again, after replacing SATA cables and swapping SATA ports, with a complete partition wipe of both drives. Again, rebooted fine a few times then back with the "DISK BOOT FAILURE" error. Looked on the web and found some discussions about it so I then started from scratch again. This time I wiped the MBR on both drives using MBRWork, disconnected the 500gb and reinstalled to the SSD. Removed the install DVD and installed all the drivers which involved many reboots, all with no problem. To make sure I also did a few cold boots as well. Reconnected the 500gb, initialised, partitioned and formatted it. Copied data to it and did some more reboots and shutdowns. All was ok. Then out of the blue comes another "DISK BOOT FAILURE" and again, if the Win7 install DVD is in the drive it boots fine. So, is the SSD a bad'un? TIA UPDATE: It was a BIOS issue! I found a hidden away option for HDD boot order, which was separate from the usual HDD/CDRom/FDD boot order option. The WD was set to boot before the SSD... Swapped them round and all is well. Still don't understand how it worked at first though... Thanks Solaris

    Read the article

< Previous Page | 203 204 205 206 207 208 209 210 211 212 213 214  | Next Page >