Search Results

Search found 15383 results on 616 pages for 'home automation'.

Page 207/616 | < Previous Page | 203 204 205 206 207 208 209 210 211 212 213 214  | Next Page >

• Ubuntu 12.04 installation on GPT + RAID going into grub rescue

  - by Proy

  I have two 2TB disks. I am installing Ubuntu 12.04 using the alternate version of the server cd. On the partitioning page I have done my partitioning as follows /dev/sda1 - 32 MB - bios_grub /dev/sda2 - 50 GB -raid device /dev/sda3 - 8 GB -raid device /dev/sda4 - Balance full GB - raid device /dev/sdb1 - 32 MB - bios_grub /dev/sdb2 - 50 GB -raid device /dev/sdb3 - 8 GB -raid device /dev/sdb4 - Balance full GB - raid device After this I have setup raid devices /dev/md0 for /(/dev/sda2 + /dev/sdb2) for / ext4 /dev/md1 for swap( /dev/sda3 + /dev/sdb3)for swap /dev/md2 for /home(/dev/sda4 + /dev/sdb4)for /home ext4 The installation finishes it shows that it is installing grub to /dev/sda and /dev/sdb. But once the system reboots it falls into grub rescue mode. on doing ls I can not see the md devices only hd once. I also tried booting into rescue mode with the install cd and doing grub-install /dev/sda and /dev/sdb. What am I doing wrong ? Why is grub2 not detecting the raid revices ? UPDATE: I just did the same steps with Ubuntu 10.04 and it worked perfectly fine. I wiped out the RAID and partitions and everything and did it from scratch. I think the issue is with Ubuntu 12.04 and the way it partitions 2 TB disks

  Read the article

• Ubuntu, user can't write to a directory and I don't see why not.

  - by Peter

  I've got a directory, /var/www/someProject/backup/mysql, and I want the user mysql to write to it. Each time I try to write to it with the mysql user, I get a "can't read/write" error. Yet the directory is 777 as you can see here: drwxrwxrwx 2 aUser users 4096 2010-03-17 17:14 mysql I also tried to chown the directory to mysql:mysql, just like the home dir of the mysql user, but no luck, that changed nothing. What am I doing wrong here? Or is the mysql user limited to his home dir in some other way in Ubuntu? Been bugging me for days now, this problem so any help greatly appreciated.

  Read the article

• Experiences with Ubuntu One?

  - by rsuarez

  I'm currently testing several backup/sync services: Dropbox, SpiderOak and Ubuntu One. Of them, Dropbox is the winner hands down; SpiderOak is nice too, but a bit more intrusive and unpredictable (sometimes is slow in syncing some files, or doesn't sync them at all). Ubuntu One has promise, but I've used it much less than the other two. I'm thinking about buying a "20 pack" and using Ubuntu One as my only synchronization software. It's the cheapest of them all (3$/month vs 10$ in Dropbox and SpiderOak), and 20GB of space is enough for me. My intention is to sync most of my $HOME folder. All the computers I'll connect will have Ubuntu installed, so not being multiplatform doesn't really matter to me. If its performance is as good as Dropbox's, I'm sold. But I'd like to gauge some experiences here first. Is anyone using it seriously? I.e., to sync a lot of files that change often (like the aforementioned $HOME folder, program sources, or something alike). What have been your experiences? Thanks in advance.

  Read the article

• How to perform fresh linux install while preserving software raid and user accounts

  - by slayton

  I have a system with two software raid arrays. The OS is Ubuntu 9.04 and is no longer receiving updates. I'd like to update the system to 12.04 rather than trying to do the automatic update from 9.04-> 9.10-> ... -> 12.04. My main drive has 2 partitions that are mounted at / and /home. Is it possible to do a fresh install of linux to the partition where / is mounted while preserving user accounts and preferences (such as passwords, home dir locations, etc...)? Additionally what do I need to do to keep my software raid array intact following the OS re-install?

  Read the article

• How do I make subsonic (media server) work with SSL?

  - by John Baber

  The roughly out-of-the-box setup as a regular user works fine (meaning the site appears at http://myserver.com:4040). From ps aux java -Xmx100m -Dsubsonic.home=/var/subsonic -Dsubsonic.host=0.0.0.0 -Dsubsonic.port=4040 -Dsubsonic.httpsPort=0 -Dsubsonic.contextPath=/ -Dsubsonic.defaultMusicFolder=/var/music -Dsubsonic.defaultPodcastFolder=/var/music/Podcast -Dsubsonic.defaultPlaylistFolder=/var/playlists -Djava.awt.headless=true -verbose:gc -jar subsonic-booter-jar-with-dependencies.jar but just giving an https port java -Xmx100m -Dsubsonic.home=/var/subsonic -Dsubsonic.host=0.0.0.0 -Dsubsonic.port=4040 -Dsubsonic.httpsPort=6060 -Dsubsonic.contextPath=/ -Dsubsonic.defaultMusicFolder=/var/music -Dsubsonic.defaultPodcastFolder=/var/music/Podcast -Dsubsonic.defaultPlaylistFolder=/var/playlists -Djava.awt.headless=true -verbose:gc -jar subsonic-booter-jar-with-dependencies.jar makes http://myserver.com:4040 say HTTP ERROR: 404 NOT_FOUND RequestURI=/index.view Powered by jetty:// and https://myserver.com:6060 say Unable to connect I'm only making the change by doing # SUBSONIC_ARGS="--port=80 --https-port=443 --max-memory=120" SUBSONIC_ARGS="--max-memory=100 --https-port=6060" in /etc/default/subsonic and issuing a sudo service subsonic restart (this is Ubuntu Oneiric)

  Read the article

• Difficulty Mounting Volumes on a Partitioned External HD

  - by Todd

  I'm having a great deal of difficulty with an external hard drive. I'm currently running a dual boot system (XP Service Pack 3 and Ubuntu 11.04 Natty Narwahl) on a Dell Inspiron B120. I'm trying to set up a new 80 GB Hitachi external HD. Using GParted, I formatted the drive and set up the partitions. The partitioning scheme is as follows 10GB NTFS Primary, 2GB Linux-Swap Primary, 50GB FAT32 Primary, 12GB Unallocated. After applying those changes, I went into Disk Utility and the HD appears along with the correct partitions. When I try to mount the volumes for partitions 1 and 3, I get a pop-up stating: Error Mounting Volume An error occurred while performing an operation on "Home" (Partition 3 of HTS548080m9AT00): The daemon is being inhibited. When I try to to check the filesystem I get a pop-up stating: Error Checking filesystem on volume An error occurred while performing an operation on "Home" (Partition 3 of HTS548080m9AT00): The daemon is being inhibited. Throughout the time that I'm attempting to troubleshoot the problem, the external drive light is on and blinking. With my frustration hitting a boiling point, I try to shut down the drive and remove it so that I can plug in a different external HD that works PERFECTLY. However, when I try to shut down and safely remove the drive, I get a pop-up stating: Error Detaching Drive An error occurred while performing an operation on "80GB Hard Disk" (HTS548080m9AT00): The daemon is being inhibited. Can anyone tell me what I'm doing wrong? I'm a newbie and not that skilled with terminal commands, so please dumb it down for me if you request specific command output.

  Read the article

• How to block a user in apache httpd server from accessing a *.php file inside a Directory, instead user should access this using Directory name

  - by Oxi

  My requirement looks Simple, But Googling Did not help me yet. my query is i want to Throw a 404 page to a user(Not Re-Direct to another folder or file), who is trying to Access *.php files in my website ex: when a client asks for www.example.com/home/ i want to show the content , but when user says www.example.com/home/index.php i want to show a 404 page. i tried different methods, nothing worked for me, one of which tried is shown below <Directory "C:/xampp/htdocs/*"> <FilesMatch "^\.php"> Order Deny,Allow Deny from all ErrorDocument 403 /test/404/ ErrorDocument 404 /test/404/ </FilesMatch> </Directory> Thanks in Advance

  Read the article

• How to setup an iTunes library to use between two Macs?

  - by stead1984

  As you can tell this is no where near work related. I have an iMac G5 where my itunes is currently hosted, I have also just got a new MacBook Pro. What I want to be able to do is sync my itunes library from my iMac to my MacBook Pro, that way it can be accessible away from my home network, then if I make any changes to the itunes library (like change a track name) it will sync these changes back once I connect back to the home network. My current itunes contains music, videos, podcasts, playlists and iPhone apps, I would also like iTunes to track play counts collectively between the iMac and the MacBook Pro.

  Read the article

• Unable to connect to network

  - by user33750

  Hey guys, I have a question. I have been having problems connecting a new netbook to my network at home. I have an Asus Eeepc 100HAB. I have tried to run a repair on the connection, uninstalled and re-installed the network card, made sure all of the drivers are up-to-date as well. Two caveats: I have a laptop that I recently switched to a wired connection because it wasn't connecting to the network as well, and the netbook connects to an unsecured network i found just fine, only having a problem getting into my home network. Passwords are correct, and the computer where the connection originates from is working fine as well. Any ideas?

  Read the article

• Most effective way to do daily standup meeting when a few people are remote

  - by Burhan Ali

  I am a software developer in a small team of seven. We are not an Agile (with a big 'A') team but are experimenting with some aspects of agile. One of these is the daily "standup" meeting. The difficulty here is that for two days of the week we have at least one person working from home so the full team isn't available in the same room. What is the best way to carry out a daily standup in this situation? Some facts that may be relevant: We all work in a single open plan room. We use Skype in our company. We don't have any video conferencing capability. We all work the same hours so there are no timezone complexities involved. The development manager is one of the people who works from home one day a week. Things we have tried: Conference call using Skype: This is tricky for those in the office because you can hear people speak in the room and then a split second later through the headset. This can e very distracting. Conference phone: Awful experience. Hard to get them to work and poor quality audio. Text-based updates using Skype. This is not as engaging and is no different than just firing off a status email in the morning. I have seen other questions about remote collaboration but they are mainly about completely remote teams and/or teams that span multiple time zones. We are not affected by either of these problems. What can we do to make our standup meetings better in these circumstances?

  Read the article

• Ubuntu: One or more of the mounts listed in fstab cannot ye be mounted

  - by Phuong Nguyen

  I was enjoying a Movie when my Ubuntu suddenly hung. At the next reboot, here is the message: One or more of the mounts listed in /etc/fstab cannot yet be mounted: /home: waiting for /dev/disk/by-uuid/.... Press ESC to enter a recovery shell. Problems: When I enter recovery shell, I don't know that to do. If I press Ctrl+D, then the message above will reappear. What should I do? I checked with Ubuntu Live CD and my partition looks OK. I have 2 separate partitions for / and /home

  Read the article

• GNOME session not starting after filesystem corruption

  - by user3215

  I'm running Ubuntu 9.10 desktop edition. Suddenly today /home became corrupted and I was prompted to run fsck manually. I ran fsck -y /home and rebooted the system. The system booted but I got no GUI interface (GNOME session) but a black screen with a user prompt instead. Any tricks here to start my system normally? Any help is greatly appreciated. EDIT:1 The error were similar to the the following(may be with some mistakes as I had to type it manually): machine1 login: root password: at login Sun Jan 16 15:30:46 IST 2011 on tty1 EXT3-fs error (devie sda1): ext3_lookup :deleted inode referenced aborting journal on device sda1 Remounting filesystem read-only root@machine1:~# startx ktemp: failed to create file via template `/tmp/serverauth.xxxxxxxxxxx: Read-only file /usr/bin/startx: line 157: cannot create temp file for here-document: Read-only file xauth: error in locking authority file /root/.Xauthority /usr/bin/startx: line 173: cannnot create temp file for here-document: Read-only file xauth: error in locking authority file /root/.Xauthority /usr/bin/startx: line 173: cannnot create temp file for here-document: Read-only file X: cannot stat /tmp/.x11-unix (No such file or directory), aborting giving up. xinit: No such file or directory (errno 2): unable to connect to xserver xinit: No such process (errno 3): Server error xauth: error in locking authority file /root/.Xauthority

  Read the article

• Encrypt SSD or not?

  - by JamesBradbury

  My desktop machine is running Ubuntu 12.04 (and will probably stay with it until the next LTS). I've got a new 120GB SSD on the way as my existing 420GB spinning disk. If it makes any difference I'll be dual-booting with Windows 7 across both disks too. I've read some helpful answers here about /home setup and enabling TRIM, which I intend to follow. So most of my /home will be on the SSD, with only photos, videos and music on the spinning disk. The question is, when I reinstall Ubuntu from CD or USB, whether I should encrypt the SSD? Specifically: I'm reading that drive wear isn't much of an issue with modern SSDs as they last decades even if you spam them. Is this true? How big a performance reduction will encrypting cause (I have an i7 Sandybridge, so I guess it can cope)? Is it more important from a security point of view to encrypt an SSD? I think I read somewhere that it may be hard to reliably wipe data. By all means answer even if you only know about one of those things.

  Read the article

• rsync - How to exclude one .htaccess but not all of them

  - by Cory Gagliardi

  I have an rsync command for copying my files from dev to production. I don't want to copy the .htaccess file that's in the root of the HTML directory but, I do want to copy the few .htaccess files that are in its sub directories. I'm using the argument --exclude .htaccess which is stopping all of the files from getting copied. The other arguments I'm including are -a --recursive --times --perms. Is it possible to configure rsync to do this? Edit: Here is my full command: rsync -a --recursive --times --perms \ --exclude prop_images --exclude tracking --exclude vtours \ --exclude .htaccess --exclude .htaccess_backup --exclude "*~" \ /home/user/dev_html/* /home/user/public_html/

  Read the article

• Vacation sends autoreply message to the recipient as well

  - by elitalon

  Hi, I have configured my Postfix server with vacation for a domain. Sending a message to [email protected] causes two events: The message is delivered to the recipient ([email protected]) An auto-reply message is sent to the sender, alerting that [email protected] should be used instead. Everything works well except for one particular drawback: the auto-reply is also sent to the recipient, so it receives two messages in the end. What can I do to avoid that? I'm only using the $TO variable in the custom vacation.msg message. And here is Postfix's master.cf vacation line: autoreply unix - n n - - pipe flags=Rhu user=vacation argv=/usr/bin/vacation -j -m /home/vacation/.vacation.msg -f /home/vacation/.vacation.db vacation I know using the -j is a little bit risky according to man page, but I'm kind of testing here.

  Read the article

• Prevent Windows 7 from installing a "critical" updates that crashes the system

  - by Sylverdrag

  I am running Windows 7 home premium. Up until yesterday, everything was going just beautifully, until I received a "critical update". As soon as the critical update was installed, the system became extremely unstable and froze up every few minutes requiring me to restart the system several times, with the same results. I used system restore to roll back the * update, and everything went back to normal... except that I keep getting a message telling me to restart the computer so that it can install this "critical update". There is no "don't install that crap on my machine" option. Disabling the updates doesn't change anything, turning off the windows update service doesn't change anything either, and being on Home premium, I have no access to the group policies. Any ideas of what can be done to prevent Windows from installing this update the next time I reboot?

  Read the article

• GPO: Disable WiFi when computer is connected to LAN with wire

  - by r0ca

  Hi all! Is anyone of you know how to disable, thru a GPO, the Wireless connection as soon as the computer is connected to the LAN with a wire. By example, a user is at home with his laptop, connected to his home wifi connection. He leaves and comes to the office but the Wifi is still enabled. He plugs the ethernet cable in the computer and then, both wifi and wire connection are enable. I would like to apply a GPO that does this... Thanks a bunch!

  Read the article

• accessing live usb files from new hd ubuntu install

  - by Robin Bailey

  After my live USB (ubuntu 12.04 lts) refused to boot, I proceeded to install the same Ubuntu version on the laptop hard drive (a dual boot next to Win xp). This all went well without a hitch. Previous to this, I spent several weeks enjoying and exploring ubuntu from the usb pendrive. During this time I changed lots of settings and customized Firefox and more. Now, I'd like to import the home folder from the usb drive into the new install home folder on the hard disk, which is the purported folder that holds all those special settings to my knowledge. Unfortunately and only being familiar with Windows file systems, the view of the usb file system from the new hdd install is totally perplexing. I can't find anything that looks anywhere close to the original file system. More, I can't find any of the files I had created and stored there, like the LibreOfficeCalc file that has all my passwords (this one is really discouraging) that was stored on the ubuntu desktop. Help me find this file alone and I'll bow down with full apologies to any and all computer gods. Being able to import all those customizing settings into the new install would be a major bonus also, but hey, I'm not greedy. I'll take the passwords file and be happy! And humble! I would be very grateful for some clear, understandable help on this. Thanks

  Read the article

• Windows 7 Default Gateway problem

  - by Matt

  I have a strange problem (or at least seems strange to me) the below are IP configurations for two laptops on my home network which consists of a main router 192.168.11.1 and a connected wireless router (i know this can cause problems but has always worked until I got the win7 machine) at 192.168.11.2 with DHCP disabled. Laptop 1 - Win XP IP: Dynamically assigned by main router default gateway: 192.168.11.1 (main router) This machine gets perfect connectivity. Laptop 2 - Win7 IP: dynamically assigned by main router Default Gateway: 192.168.11.2 THIS IS THE PROBLEM... I cannot seem to get this machine to default to the main router for the gateway UNLESS I go to a static configuration which I would rather not do since I regularly go between my home and public networks. Why is my Win7 machine not finding the main gateway the same way that the other laptop is? I believe that the rest of my setup is fine as it has always worked and it works perfectly when set as static ip and gateway. Please help! Thanks

  Read the article

• Configure ubuntu 12.10 to share internet through second NIC with subnetwork

  - by Dan Smith

  I have an Ubuntu 12.10 box with 2 NICs. eth0 is connected to my 192.168.1.X network, which is connected to my home router and out to the internet. I want the other interface, eth1,to support 10.0.0.x and allow devices on that network to access the internet through my ubuntu box. I do not need dhcp on the 10.0.0.x network. Here's a schematic: Internet --- home router ---- ubuntu[eth0:192.168.1.x, eth1:10.0.0.x] --- [10.0.0.x device] How do I configure the ubuntu box to share the internet with devices on that subnetwork? Thanks!

  Read the article

• User accounts in FTP

  - by Brad

  I have an FTP server(proftpd on debian) that I'm going to allow a couple friends access to, and I want some safety nets in place, just in case. These are some of the things I'd like to do: Jail the accounts to their home directories and impose a cap on the amount of data they can upload Allow them access to a shared folder(via symlink or something) where they have full access(Also with a storage cap, but larger) Allow my own account full access to the system(Using groups I guess) Not allow anonymous access, or allow it with its own folder, separate from the shared user folder Currently, I've got the accounts set up and jailed, but it seems like the symlink that I put in is not allowing them to visit the shared folder. I suppose this has to do with them not having read permissions anywhere but their own home directories, or maybe it's something else, I'll continue to look into it and provide any information that is requested. Is what I'm trying to do possible? Any tips or resources that you can share are appreciated. Thanks.

  Read the article

• How to install Ubuntu 12.04.1 in EFI mode with Encrypted LVM?

  - by g0lem

  I'm trying to properly install Ubuntu 12.04.1 LTS 64-bit PC (AMD64) with the alternate install CD ".iso" on a lenovo Thinkpad X220. Default Hard Disk (with a pre-installed version of Windows 7) has been replaced with a brand new SSD. The UEFI BIOS of the lenovo Thinkpad X220 is set to "UEFI Boot only" & "USB UEFI BIOS Support" is enabled (I'm using an external USB DVD reader to perform Ubuntu installation). The BIOS is a Phoenix SecureCore Tiano, BIOS version is 8DET56WW (1.26). The attempts below are made with the UEFI BIOS settings described above. Here's what I've tried so far: Boot on a live GParted CD Create a GPT partition table Create a FAT32 partition for UEFI System, set the partition to "EF00" type ("boot" flag) Leave remaining space unformated Boot on Ubuntu 12.04.1 LTS 64-bit PC (AMD64) with alternate CD: Perform the install with network updates enabled Use manual partitioning FAT32 partition created with GParted is used as "EFI System partition" Remaining space is set to be used as "Physical volume for LVM" Then "Configure encrypted volumes" using the previous "Physical volume for LVM" as the encrypted container, passphrase is setup. "Configure the Logical Volume Manager" creating a volume Group using the encrypted container /dev/mapper/sda2_crypt Creation of the Logical Volumes "Create logical volume", choosing the previously created volume Group Assign a mount point and file system to the Logical volumes : LV-root for / LV-var for /var LV-usr for /usr LV-usr-local for /usr/local LV-swap for swap LV-home for /home NOTE: /tmp would be in RAM only using TMPFS Bootloader step: neither my ESP partition (/dev/sda1, /dev/sda or MBR) seems to be the right place for GRUB, I get the following message (X suffix is for demonstration only): unable to install grub in /dev/sdaX Executing 'grub-install /dev/sdaX' failed This is a fatal error. Finish installation without the Bootloader & Reboot The system doesn't start, there's no EFI/GRUB menu at startup. What are the steps to perform a clean and working installation of Ubuntu 12.04.1 Precise Pangolin, 64bit version in U(EFI) mode using the encrypted LUKS + LVM scheme described above?

  Read the article

• Secunia Personal Software Inspector (PSI) 2.0

  - by TATWORTH

  Secunia Personal Software Inspector is now available in a updated version that is free for personnal use. The home page says "The Secunia PSI is aFREE security tool designed to detectvulnerable andout-dated programs and plug-ins which expose your PC to attacks. Attacks exploiting vulnerable programs and plug-ins are rarely blocked by traditional anti-virus and are therefore increasingly "popular" among criminals. The only solution to block these kind of attacks is to apply security updates, commonly referred to as patches. Patches are offered free-of-charge by most software vendors, however, finding all these patches is a tedious and time consuming task. Secunia PSI automates this and alerts you when your programs and plug-ins require updating to stay secure. Download the Secunia PSI now and secure your PC today - free-of-charge." I have used this for some time on my home PC and have found it to be very useful in identifying required updates. I use Google Chrome but I found that whenever a new version is issued, the old version is not de-installed. Secunia PSI helps me to locate them and get rid of them.

  Read the article

• Set global handling for PHP scripts in NGINX + PHP-FPM

  - by Radio

  I have to define fastcgi_pass for every virtual host. How do I define it global-wise? server { listen 80; server_name www.domain.tld; location / { root /home/user/www.domain.tld; index index.html index.php; } location ~ \.php$ { fastcgi_pass 127.0.0.1:9000; fastcgi_index index.php; fastcgi_param SCRIPT_FILENAME /home/user/domain.tld$fastcgi_script_name; include fastcgi_params; } }

  Read the article

• Possible to get OpenDNS to dereference Host on VPN?

  - by Scott P

  I recently changed ISPs for my home internet. I am now having some trouble getting back into the corporate network from home over the VPN. I have figured out the OpenDNS is resolving the Hosts on the VPN incorrectly when I am using TCP/IP. When I browse to one of the hosts on corporate network, i.e. \host1, from the file manager this succeeds. However, when I ping the host, i.e. ping host1, the IP address is resolving to the OpenDNS name server instead of the actual Host IP address. Does anyone know how to make this work? On a hunch, I turned off type correction. But, this did not help.

  Read the article

< Previous Page | 203 204 205 206 207 208 209 210 211 212 213 214  | Next Page >