netbeans plugins - Page 207

A new MEF error I've not seen before -- "The export is not assignable to type..."

- by Dave

I was very surprised to get this error today, as it's one that I've never encountered before. Everything in the code looked okay, so I did some searches. The previous questions and their respective answers didn't help. This one was solved when the poster made sure his assembly references were consistent. I don't have this issue right now because I'm currently referencing another project in my solution. This one was solved when the poster was instructed to use ImportMany, but I am already using it (I think properly, too) to try to load multiple plugins This one was solved when the poster realized that there was a platform target mismatch. I've already gone through my projects to ensure that everything targets x86. So here's what I am trying to do. I have a plugin that owns a connection to a device. I might also need to be able to share that connection with another plugin. I decided that the cleanest way to do this was to create an interface that would allow the slave plugin to request its own connection to the device. Let's just call it IConnectionSharer. If the slave plugin does not need to borrow this connection and has its own, then it should use its own implementation of IConnectionSharer to connect to the device. My "master" plugin (the one that owns the connection to the device) implements IConnectionSharer. It also exports this via ExportAttribute. My "slave" plugin assembly defines a class that also implements and exports IConnectionSharer. When the application loads, the intent is for my slave plugin, via MEF, to enumerate all IConnectionSharers and store them in an IEnumerable<IConnectionSharer>. It does so like this: [ImportMany] public IEnumerable<IConnectionSharer> AllSharedConnections { get; set; } But during part composition, I get the error the export 'Company.MasterPlugin (ContractName="IConnectionSharer")' is not assignable to type 'IConnectionSharer'. The error message itself seems clear enough -- it's as if MEF thinks my master plugin doesn't inherit from IConnectionSharer... but it does! Can anyone suggest further debugging strategies? I'm going to start the painful process of single stepping through the MEF source.

Read the article

This Android SDK requires Android Developer Toolkit version 22.0.0 or above. Current version is 21.x.x.

- by user2626673

Hi i have a problem with my Eclipse and the SDK (i have download and install the latest ADT Bundle for windows ) when i start my eclipse i get this problem : This Android SDK requires Android Developer Toolkit version 22.0.0 or above. Current version is 20.0.0. please update your SDK tools to the latest version i have tried the option : Help - check for updates But with no new update find then i try this one : How to Update your ADT to Latest Version In Eclipse go to Help Install New Software ---> Add inside Add Repository write the Name: ADT (or whatever you want) and Location: https://dl-ssl.google.com/android/eclipse/ after loading you should get Developer Tools and NDK Plugins check both if you want to use the Native Developer Kit (NDK) in the future or check Developer Tool only click Next Finish But i dont have the option to click next to finish (the back , next and finish options are grey ) Then i try this method : Go here download latest version of ADT-22.0.4.zip (*) At Eclipse > Help > Install new software... > Uncheck Contact all update sites during install to find required software (last bottom preference) that will avoid any unwanted delays during install. then at the same screen (top) Click Add > Archive > select downloaded ADT-X.X.X.zip > follow on screen installation steps But had the same problem when it was to finish the installation.. no option to click ''next'' then i try this one : Help – Install New Software in the ADT menu. Type https://dl-ssl.google.com/android/eclipse/site.xml in “Work with:” and Enter. You can see the “Developer Tools” item. Select it and click Next. Click Next one more. Click Finish accepting the terms of the license agreements. Click OK in the “Security Warning” window. Let the installer restart ADT after installing the tools. But and in this option have the same problem as above.. can click the ''next'' to finish http://i30.photobucket.com/albums/c316/caslor_1978/diafora/atdproblem_zps0d141b7b.jpg i check my version and it is the latest but have the problem http://i30.photobucket.com/albums/c316/caslor_1978/diafora/atdproblem2_zps81de6317.jpg How can i fix this problem ? any suggestion? Win7 / 32bit / java SE Development kit7 update 25

Read the article

No image displayed in Fancybox

- by seansean11

I am having trouble getting fancybox to display its corresponding images on a website that I'm building http://www.nomadicdrift.com/test/kaniwa#events . It's a custom one page portfolio theme that I set up on the WordPress platform. If you follow the link to the events section you will see 1 figure item in a gallery like position. I have this image set up to work as a fancybox gallery, but when you click on it, it opens up the fancybox interface but does not place a image in the frame, even though it should. So this is the problem...the images do not show up in fancybox and instead I see just the frame. Here is the html that I'm displaying: <figure> <a class="fancybox" data-fancybox-type="Fashion Show de Paris, France" href="http://www.nomadicdrift.com/test/kaniwa/wp-content/uploads/2012/07/NM2.jpg"> <img class="attachment-evento wp-post-image" width="231" height="191" title="NM" alt="NM" src="http://www.nomadicdrift.com/test/kaniwa/wp-content/uploads/2012/07/NM2-231x191.jpg"> </a> <figcaption> <a class="fancybox" data-fancybox-type="Fashion Show de Paris, France" href="http://www.nomadicdrift.com/test/kaniwa/wp-content/uploads/2012/07/CEDESAN.jpg"> </a> <h4>Fashion Show de Paris, France</h4> </figcaption> </figure> I'm not going to bore you with the PHP that I used to get that output because I think the problem lies elsewhere. ***I have tried to set up a simple standard fancybox gallery on the site also, but it gives me thes same problem, leading me to believe that the problem is deeper than the html markup. I have also successfully used this same markup for a one thumbnail fancybox gallery on another site. I thought maybe it was due to some conflict in the .js files I'm using. I tried uninstalling all of my plugins/addons (which aren't too many) one by one and still had the same result. I have all of my personal javascript in the functions.js file, which is where I call the fancybox plugin using the standard $("a.fancybox").fancybox();. I have installed this plugin before on other sites and have searched extensively for an answer, so any help is greatly appreciated. Thanks, Sean

Read the article

MEF C# Service - DLL Updating

- by connerb

Currently, I have a C# service that runs off of many .dll's and has modules/plugins that it imports at startup. I would like to create an update system that basically stops the service, deletes any files it is told to delete (old versions), downloads new versions from a server, and starts the service. I believe I have coded this right except for the delete part, because as long as I am not overwriting anything, the file will download. If I try to overwrite something, it won't work, which is why I am trying to delete it before hand. However, when I do File.Delete() to the path that I want to do, it gives me access to the path is denied. Here is my code: new Thread(new ThreadStart(() => { ServiceController controller = new ServiceController("client"); controller.Stop(); controller.WaitForStatus(ServiceControllerStatus.Stopped); try { if (um.FilesUpdated != null) { foreach (FilesUpdated file in um.FilesUpdated) { if (file.OldFile != null) { File.Delete(Path.Combine(Utility.AssemblyDirectory, file.OldFile)); } if (file.NewFile != null) { wc.DownloadFile(cs.UpdateUrl + "/updates/client/" + file.NewFile, Path.Combine(Utility.AssemblyDirectory, file.NewFile)); } } } if (um.ModulesUpdated != null) { foreach (ModulesUpdated module in um.ModulesUpdated) { if (module.OldModule != null) { File.Delete(Path.Combine(cs.ModulePath, module.OldModule)); } if (module.NewModule != null) { wc.DownloadFile(cs.UpdateUrl + "/updates/client/modules/" + module.NewModule, Path.Combine(cs.ModulePath, module.NewModule)); } } } } catch (Exception ex) { Logger.log(ex); } controller.Start(); })).Start(); I believe it is because the files are in use, but I can't seem to unload them. I though stopping the service would work, but apparently not. I have also checked the files and they are not read-only (but the folder is, which is located in Program Files, however I couldn't seem to get it to not be read-only programmatically or manually). The service is also being run as an administrator (NT AUTHORITY\SYSTEM). I've read about unloading the AppDomain but AppDomain.Unload(AppDomain.CurrentDomain); returned an exception as well. Not too sure even if this is a problem with MEF or my program just not having the correct permissions...I would assume that it's mainly because the file is in use.

Read the article

Can't get MySQL to install

- by James Marthenal

I'd like to think I know what I'm doing in a Unix shell but maybe not. I made a mistake in a configuration file for MySQL, so I decided to just uninstall it and then reinstall it, so I did: sudo apt-get --purge remove mysql-server mysql-server-5.0 mysql-client The files were deleted, so I then tried to install it, but it didn't ask me for a root password or anything else, so I uninstalled it using the above command again and then did sudo rm -rf /etc/mysql sudo rm /etc/init.d/mysql sudo rm -rf /var/lib/mysql* I then restarted the computer then installed it again: sudo apt-get install mysql-server mysql-client It asked for a root password, and everything looked like it would work, until I saw this: $ sudo apt-get install mysql-server mysql-client Reading package lists... Done Building dependency tree Reading state information... Done The following extra packages will be installed: mysql-server-5.0 Suggested packages: tinyca The following NEW packages will be installed: mysql-client mysql-server mysql-server-5.0 0 upgraded, 3 newly installed, 0 to remove and 1 not upgraded. Need to get 0B/27.4MB of archives. After this operation, 86.7MB of additional disk space will be used. Do you want to continue [Y/n]? y WARNING: The following packages cannot be authenticated! mysql-server-5.0 mysql-client mysql-server Authentication warning overridden. Preconfiguring packages ... Can't exec "/tmp/mysql-server-5.0.config.28101": Permission denied at /usr/share/perl/5.10/IPC/Open3.pm line 168. open2: exec of /tmp/mysql-server-5.0.config.28101 configure failed at /usr/share/perl5/Debconf/ConfModule.pm line 59 mysql-server-5.0 failed to preconfigure, with exit status 255 Selecting previously deselected package mysql-server-5.0. (Reading database ... 160284 files and directories currently installed.) Unpacking mysql-server-5.0 (from .../mysql-server-5.0_5.0.51a-24+lenny5_amd64.deb) ... Selecting previously deselected package mysql-client. Unpacking mysql-client (from .../mysql-client_5.0.51a-24+lenny5_all.deb) ... Selecting previously deselected package mysql-server. Unpacking mysql-server (from .../mysql-server_5.0.51a-24+lenny5_all.deb) ... Processing triggers for man-db ... Setting up mysql-server-5.0 (5.0.51a-24+lenny5) ... Stopping MySQL database server: mysqld. /var/lib/dpkg/info/mysql-server-5.0.postinst: line 144: /etc/mysql/conf.d/old_passwords.cnf: No such file or directory dpkg: error processing mysql-server-5.0 (--configure): subprocess post-installation script returned error exit status 1 Setting up mysql-client (5.0.51a-24+lenny5) ... dpkg: dependency problems prevent configuration of mysql-server: mysql-server depends on mysql-server-5.0; however: Package mysql-server-5.0 is not configured yet. dpkg: error processing mysql-server (--configure): dependency problems - leaving unconfigured Errors were encountered while processing: mysql-server-5.0 mysql-server E: Sub-process /usr/bin/dpkg returned an error code (1) Now I can't seem to figure out what to do. I just want to get a clean MySQL installation at this point. I'm running the latest stable release of Debian. All help is appreciated—thanks! Edit: I looked at this similar question, which suggests that I uninstall mysql-common, but when I try to do so I see: The following packages will be REMOVED: apache2 apache2-mpm-prefork apache2-utils apache2.2-common git-svn libapache2-mod-php5 libapache2-mod-python libapache2-svn libaprutil1 libdbd-mysql-perl libdbd-mysql-rubygem libmysql-ruby libmysql-ruby1.8 libmysql-rubygem libmysqlclient15-dev libmysqlclient15off librdf-perl librdf0 libserf-0-0 libsvn-perl libsvn1 mysql-client-5.0 mysql-common mytop ndn-apache22-php5 ndn-apache22-svn ndn-interpreters ndn-lighttpd ndn-netsaint-plugins ndn-perl-modules ndn-php5-cgi ndn-php5-xcache ndn-php53 ndn-php53-suhosin ndn-rubygems php5 php5-mcrypt php5-mysql proftpd proftpd-mod-mysql python-django python-mysqldb python-subversion python-svn subversion subversion-tools trac zendoptimizer 0 upgraded, 0 newly installed, 48 to remove and 1 not upgraded. Eeek! Any suggestions?

Read the article

Red Hat Yum not working out of the box?

- by Tucker

I have a server runnning Red Hat Enterprise Linux v5.6 in the cloud. My project constraints do not allow me to use another OS. When I created the cloud server, I was able to SSH into it and access the shell. I next ran the command: sudo yum update But the command failed. About a month ago I created another server with the same machine image and didn't have that error. Why is it failing now? The following is the terminal output sudo yum update Loaded plugins: security Repository rhel-server is listed more than once in the configuration Traceback (most recent call last): File "/usr/bin/yum", line 29, in ? yummain.user_main(sys.argv[1:], exit_code=True) File "/usr/share/yum-cli/yummain.py", line 309, in user_main errcode = main(args) File "/usr/share/yum-cli/yummain.py", line 178, in main result, resultmsgs = base.doCommands() File "/usr/share/yum-cli/cli.py", line 345, in doCommands self._getTs(needTsRemove) File "/usr/lib/python2.4/site-packages/yum/depsolve.py", line 101, in _getTs self._getTsInfo(remove_only) File "/usr/lib/python2.4/site-packages/yum/depsolve.py", line 112, in _getTsInfo pkgSack = self.pkgSack File "/usr/lib/python2.4/site-packages/yum/__init__.py", line 662, in <lambda> pkgSack = property(fget=lambda self: self._getSacks(), File "/usr/lib/python2.4/site-packages/yum/__init__.py", line 502, in _getSacks self.repos.populateSack(which=repos) File "/usr/lib/python2.4/site-packages/yum/repos.py", line 260, in populateSack sack.populate(repo, mdtype, callback, cacheonly) File "/usr/lib/python2.4/site-packages/yum/yumRepo.py", line 168, in populate if self._check_db_version(repo, mydbtype): File "/usr/lib/python2.4/site-packages/yum/yumRepo.py", line 226, in _check_db_version return repo._check_db_version(mdtype) File "/usr/lib/python2.4/site-packages/yum/yumRepo.py", line 1233, in _check_db_version repoXML = self.repoXML File "/usr/lib/python2.4/site-packages/yum/yumRepo.py", line 1406, in <lambda> repoXML = property(fget=lambda self: self._getRepoXML(), File "/usr/lib/python2.4/site-packages/yum/yumRepo.py", line 1398, in _getRepoXML self._loadRepoXML(text=self) File "/usr/lib/python2.4/site-packages/yum/yumRepo.py", line 1388, in _loadRepoXML return self._groupLoadRepoXML(text, ["primary"]) File "/usr/lib/python2.4/site-packages/yum/yumRepo.py", line 1372, in _groupLoadRepoXML if self._commonLoadRepoXML(text): File "/usr/lib/python2.4/site-packages/yum/yumRepo.py", line 1208, in _commonLoadRepoXML result = self._getFileRepoXML(local, text) File "/usr/lib/python2.4/site-packages/yum/yumRepo.py", line 989, in _getFileRepoXML cache=self.http_caching == 'all') File "/usr/lib/python2.4/site-packages/yum/yumRepo.py", line 826, in _getFile http_headers=headers, File "/usr/lib/python2.4/site-packages/urlgrabber/mirror.py", line 412, in urlgrab return self._mirror_try(func, url, kw) File "/usr/lib/python2.4/site-packages/urlgrabber/mirror.py", line 398, in _mirror_try return func_ref( *(fullurl,), **kwargs ) File "/usr/lib/python2.4/site-packages/urlgrabber/grabber.py", line 936, in urlgrab return self._retry(opts, retryfunc, url, filename) File "/usr/lib/python2.4/site-packages/urlgrabber/grabber.py", line 854, in _retry r = apply(func, (opts,) + args, {}) File "/usr/lib/python2.4/site-packages/urlgrabber/grabber.py", line 922, in retryfunc fo = URLGrabberFileObject(url, filename, opts) File "/usr/lib/python2.4/site-packages/urlgrabber/grabber.py", line 1010, in __init__ self._do_open() File "/usr/lib/python2.4/site-packages/urlgrabber/grabber.py", line 1093, in _do_open fo, hdr = self._make_request(req, opener) File "/usr/lib/python2.4/site-packages/urlgrabber/grabber.py", line 1202, in _make_request fo = opener.open(req) File "/usr/lib64/python2.4/urllib2.py", line 358, in open response = self._open(req, data) File "/usr/lib64/python2.4/urllib2.py", line 376, in _open '_open', req) File "/usr/lib64/python2.4/urllib2.py", line 337, in _call_chain result = func(*args) File "/usr/lib64/python2.4/site-packages/M2Crypto/m2urllib2.py", line 82, in https_open h.request(req.get_method(), req.get_selector(), req.data, headers) File "/usr/lib64/python2.4/httplib.py", line 810, in request self._send_request(method, url, body, headers) File "/usr/lib64/python2.4/httplib.py", line 833, in _send_request self.endheaders() File "/usr/lib64/python2.4/httplib.py", line 804, in endheaders self._send_output() File "/usr/lib64/python2.4/httplib.py", line 685, in _send_output self.send(msg) File "/usr/lib64/python2.4/httplib.py", line 652, in send self.connect() File "/usr/lib64/python2.4/site-packages/M2Crypto/httpslib.py", line 47, in connect self.sock.connect((self.host, self.port)) File "/usr/lib64/python2.4/site-packages/M2Crypto/SSL/Connection.py", line 174, in connect ret = self.connect_ssl() File "/usr/lib64/python2.4/site-packages/M2Crypto/SSL/Connection.py", line 167, in connect_ssl return m2.ssl_connect(self.ssl, self._timeout) M2Crypto.SSL.SSLError: certificate verify failed

Read the article

vim-powerline colors are out of whack in urxvt

- by komidore64

I have attached two images showing what my vim-powerline looks like. As you can see, something has happened to the colors and I cannot figure out how to fix it. I'm running Fedora 17 on a clean install with i3 (default config) and urxvt. Here is my bashrc: # .bashrc if [[ "$(uname)" != "Darwin" ]]; then # non mac os x # source global bashrc if [[ -f "/etc/bashrc" ]]; then . /etc/bashrc fi export TERM='xterm-256color' # probably shouldn't do this fi # bash prompt with colors # [ <user>@<hostname> <working directory> {current git branch (if you're in a repo)} ] # ==> PS1="\[\e[1;33m\][ \u\[\e[1;37m\]@\[\e[1;32m\]\h\[\e[1;33m\] \W\$(git branch 2> /dev/null | grep -e '\* ' | sed 's/^..$.*$/ {\[\e[1;36m\]\1\[\e[1;33m\]}/') ]\[\e[0m\]\n==> " # execute only in Mac OS X if [[ "$(uname)" == 'Darwin' ]]; then # if OS X has a $HOME/bin folder, then add it to PATH if [[ -d "$HOME/bin" ]]; then export PATH="$PATH:$HOME/bin" fi alias ls='ls -G' # ls with colors fi alias ll='ls -lah' # long listing of all files with human readable file sizes alias tree='tree -C' # turns on coloring for tree command alias mkdir='mkdir -p' # create parent directories as needed alias vim='vim -p' # if more than one file, open files in tabs export EDITOR='vim' # super-secret work stuff if [[ -f "$HOME/.workbashrc" ]]; then . $HOME/.workbashrc fi # Add RVM to PATH for scripting if [[ -d "$HOME/.rvm/bin" ]]; then # if installed PATH=$PATH:$HOME/.rvm/bin fi and my Xdefaults: ! URxvt config ! colors! URxvt.background: #101010 URxvt.foreground: #ededed URxvt.cursorColor: #666666 URxvt.color0: #2E3436 URxvt.color8: #555753 URxvt.color1: #993C3C URxvt.color9: #BF4141 URxvt.color2: #3C993C URxvt.color10: #41BF41 URxvt.color3: #99993C URxvt.color11: #BFBF41 URxvt.color4: #3C6199 URxvt.color12: #4174FB URxvt.color5: #993C99 URxvt.color13: #BF41BF URxvt.color6: #3C9999 URxvt.color14: #41BFBF URxvt.color7: #D3D7CF URxvt.color15: #E3E3E3 ! options URxvt*loginShell: true URxvt*font: xft:DejaVu Sans Mono for Powerline:antialias=true:size=12 URxvt*saveLines: 8192 URxvt*scrollstyle: plain URxvt*scrollBar_right: true URxvt*scrollTtyOutput: true URxvt*scrollTtyKeypress: true URxvt*urlLauncher: google-chrome and finally my vimrc set nocompatible set dir=~/.vim/ " set one place for vim swap files " vundler for vim plugins ---- filetype off set rtp+=~/.vim/bundle/vundle call vundle#rc() Bundle 'gmarik/vundle' Bundle 'tpope/vim-surround' Bundle 'greyblake/vim-preview' Bundle 'Lokaltog/vim-powerline' Bundle 'tpope/vim-endwise' Bundle 'kien/ctrlp.vim' " ---------------------------- syntax enable filetype plugin indent on " Powerline ------------------ set noshowmode set laststatus=2 let g:Powerline_symbols = 'fancy' " show fancy symbols (requires patched font) set encoding=utf-8 " ---------------------------- " ctrlp ---------------------- let g:ctrlp_open_multiple_files = 'tj' " open multiple files in additional tabs let g:ctrlp_show_hidden = 1 " include dotfiles and dotdirs in ctrlp indexing let g:ctrlp_prompt_mappings = { \ 'AcceptSelection("e")': ['<c-t>'], \ 'AcceptSelection("t")': ['<cr>', '<2-LeftMouse>'], \ } " remap <cr> to open file in a new tab " ---------------------------- set showcmd set tabpagemax=100 set hlsearch set incsearch set nowrapscan set ignorecase set smartcase set ruler set tabstop=4 set shiftwidth=4 set expandtab set wildmode=list:longest autocmd BufWritePre * :%s/\s\+$//e "remove trailing whitespace " :REV to "revert" file to state of the most recent save command REV earlier 1f " disable netrw -------------- let g:loaded_netrw = 1 let g:loaded_netrwPlugin = 1 " ---------------------------- Any guidance as to fixing the statusline would be fantastic. I've found a github issue outlining almost the exact same problem, but the solution was never posted. Thank you.

Read the article

iptables DNS resolution

- by Favolas

I have a virtual machine with Fedora 19 acting as a router. This machine as an interface (p8p1) with the IP 172.16.1.254 that is connected to another machine (IP 172.16.1.1) that's simulating the external network. I've installed snort 2.9.2.2, applied the snortsam-2.9.2.2.diff.gz patch and installed snortsam 2.70 on the routermachine In snort.conf besides altering some RULE_PATH I believe I've only added the following line to the file. output alert_fwsam: 127.0.0.1:898/password After doing this two comands: ifconfig p8p1 promisc /usr/local/snort/bin/snort -v -i p8p1 If I ping from the external network to the router IP, I can see the info about the pings. One of the rules that I have is icmp-info.rules that as this single line: alert icmp $EXTERNAL_NET any -> $HOME_NET any (msg:"ICMP-INFO Echo Reply"; icode:0; itype:0; classtype:misc-activity; sid:408; rev:6;fwsam: src, 5 minutes;) snortsam.conf as this data: defaultkey password accept localhost keyinterval 30 minutes dontblock 192.168.1.1 # rede local rollbackhosts 50 rollbackthreshold 20 / 30 secs rollbacksleeptime 1 minute logfile /var/log/snort/snortsam.log loglevel 3 daemon nothreads # linha importante para gerar os bloqueios via iptables iptables p8p1 LOG bindip 127.0.0.1 Now I run this command: /usr/local/snort/bin/snort -u snort -i p8p1 -c /etc/snort/snort.conf -l /var/log/snort -Dq Terminal gives this message: Spawning daemon child... My daemon child 2080 lives... Daemon parent exiting (0) and when I runsnortsam in terminal i got this: SnortSam, v 2.70. Copyright (c) 2001-2009 Frank Knobbe . All rights reserved. Plugin 'fwsam': v 2.5, by Frank Knobbe Plugin 'fwexec': v 2.7, by Frank Knobbe Plugin 'pix': v 2.9, by Frank Knobbe Plugin 'ciscoacl': v 2.12, by Ali Basel <[email protected]> Plugin 'cisconullroute': v 2.5, by Frank Knobbe Plugin 'cisconullroute2': v 2.2, by Wouter de Jong <[email protected]> Plugin 'netscreen': v 2.10, by Frank Knobbe Plugin 'ipchains': v 2.8, by Hector A. Paterno <[email protected]> Plugin 'iptables': v 2.9, by Fabrizio Tivano <[email protected]>, Luis Marichal <[email protected]> Plugin 'ebtables': v 2.4, by Bruno Scatolin <[email protected]> Plugin 'watchguard': v 2.7, by Thomas Maier <[email protected]> Plugin 'email': v 2.12, by Frank Knobbe Plugin 'email-blocks-only': v 2.12, by Frank Knobbe Plugin 'snmpinterfacedown': v 2.3, by Ali BASEL <[email protected]> Plugin 'forward': v 2.8, by Frank Knobbe Parsing config file /etc/snortsam.conf... Linking plugin 'iptables'... Checking for existing state file "/var/db/snortsam.state". Found. Reading state file. Starting to listen for Snort alerts. and snortsam.log as an entry like this 2013/10/25, 10:15:17, -, 1, snortsam, Starting to listen for Snort alerts. Now, from the external machine I do ping 172.16.1.254 and it starts showing the info and an alert file is created in /var/log/snort/ that as the info about the PINGS. Something like: [**] [1:408:6] ICMP-INFO Echo Reply [**] [Classification: Misc activity] [Priority: 3] 10/25-10:35:16.061319 172.16.1.254 -> 172.16.1.1 ICMP TTL:64 TOS:0x0 ID:38720 IpLen:20 DgmLen:84 Type:0 Code:0 ID:1389 Seq:1 ECHO REPLY Also, if I run instead /usr/local/snort/bin/snort snort -v -i p8p1 i got this message: Running in packet dump mode --== Initializing Snort ==-- Initializing Output Plugins! Snort BPF option: snort pcap DAQ configured to passive. The DAQ version does not support reload. Acquiring network traffic from "p8p1". ERROR: Can't set DAQ BPF filter to 'snort' (pcap_daq_set_filter: pcap_compile: syntax error)! Fatal Error, Quitting.. So, this are my questions: Shouldn't snortsam block the PING? Is that DAQ error causing the problem? If so, How can I solve it?

Read the article

how to uninstall mariadb and re-install mysql ? Mysql install turns into mariadb install

- by Suma

I recently upgraded my centos system via the desktop. mistake! I had mariadb, phpmyadmin working just fine before - but after the upgrade they stopped. I frantically googled and tried to follow some tutorials about mariadb * mysql reinstall untill I came to this one: http://centosforge.com/node/how-replace-mysql-mariadb-centos-6-including-mysql-uninstall-instructions-and-yum-install I executed this command to remove all of mysql: yum remove mysql-server mysql-libs mysql-devel mysql* and then tried to reinstall mysql: as below - it crashes with errors as follows: ***************************************************************** [root@localhost ~]# yum install mysql-server mysql mysql-devel ***************************************************************** Loaded plugins: fastestmirror Loading mirror speeds from cached hostfile * base: centos.serverspace.co.uk * extras: centos.serverspace.co.uk * rpmforge: www.mirrorservice.org * updates: mirror.rmg.io Setting up Install Process Package mysql-server is obsoleted by MariaDB-server, trying to install MariaDB-server-5.5.29-1.i686 instead Package mysql is obsoleted by MariaDB-server, trying to install MariaDB-server-5.5.29-1.i686 instead Package mysql-devel is obsoleted by MariaDB-devel, trying to install MariaDB-devel-5.5.29-1.i686 instead Resolving Dependencies --> Running transaction check ---> Package MariaDB-devel.i686 0:5.5.29-1 set to be updated --> Processing Dependency: MariaDB-common for package: MariaDB-devel ---> Package MariaDB-server.i686 0:5.5.29-1 set to be updated --> Processing Dependency: libssl.so.10 for package: MariaDB-server --> Processing Dependency: libcrypto.so.10 for package: MariaDB-server --> Running transaction check ---> Package MariaDB-common.i686 0:5.5.29-1 set to be updated --> Processing Dependency: MariaDB-compat for package: MariaDB-common ---> Package MariaDB-server.i686 0:5.5.29-1 set to be updated --> Processing Dependency: libssl.so.10 for package: MariaDB-server --> Processing Dependency: libcrypto.so.10 for package: MariaDB-server --> Running transaction check ---> Package MariaDB-compat.i686 0:5.5.29-1 set to be updated ---> Package MariaDB-server.i686 0:5.5.29-1 set to be updated --> Processing Dependency: libssl.so.10 for package: MariaDB-server --> Processing Dependency: libcrypto.so.10 for package: MariaDB-server --> Finished Dependency Resolution MariaDB-server-5.5.29-1.i686 from mariadb has depsolving problems --> Missing Dependency: libcrypto.so.10 is needed by package MariaDB-server-5.5.29-1.i686 (mariadb) MariaDB-server-5.5.29-1.i686 from mariadb has depsolving problems --> Missing Dependency: libssl.so.10 is needed by package MariaDB-server-5.5.29-1.i686 (mariadb) Error: Missing Dependency: libcrypto.so.10 is needed by package MariaDB-server-5.5.29-1.i686 (mariadb) Error: Missing Dependency: libssl.so.10 is needed by package MariaDB-server-5.5.29-1.i686 (mariadb) You could try using --skip-broken to work around the problem You could try running: package-cleanup --problems package-cleanup --dupes rpm -Va --nofiles --nodigest [root@localhost ~] If I now try to install libssl.10, i get asked to install glibc libraries. 2.17 and 2.7 - other discussions have said to stay clear of the as this will explode my system - I tried download 2.17 and it's huge - took ages to unzip. Could someone please help me to completelty remove maraidb and install mysql - so that I don't get the above errors and pushed over to mariadb when I run: yum install mysql-server mysql mysql-devel There are tons of material on how to install mariadb - but none i found so far that plainly explains how to go backwards to mysql.

Read the article

PHP install sqlite3 extension

- by Kevin

We are using PHP 5.3.6 here, but we used the --without-sqlite3 command when compiling PHP. (It stands in the 'Configure Command' column). But, it is very risky to recompile PHP on that server; there are many visitors. How can we install/use sqlite3? Regards, Kevin [EDIT] yum repolist gives: Loaded plugins: fastestmirror Loading mirror speeds from cached hostfile * base: mirror.nl.leaseweb.net * extras: mirror.nl.leaseweb.net * updates: mirror.nl.leaseweb.net repo id repo name status base CentOS-5 - Base 3,566 extras CentOS-5 - Extras 237 updates CentOS-5 - Updates 376 repolist: 4,179 rpm -qa | grep php gives: php-pdo-5.3.6-1.w5 php-mysql-5.3.6-1.w5 psa-php5-configurator-1.5.3-cos5.build95101022.10 php-mbstring-5.3.6-1.w5 php-imap-5.3.6-1.w5 php-cli-5.3.6-1.w5 php-gd-5.3.6-1.w5 php-5.3.6-1.w5 php-common-5.3.6-1.w5 php-xml-5.3.6-1.w5 php -i | grep sqlite gives: PHP Warning: PHP Startup: Unable to load dynamic library '/usr/lib64/php/modules/sqlite3.so' - /usr/lib64/php/modules/sqlite3.so: cannot open shared object file: No such file or directory in Unknown on line 0 Configure Command => './configure' '--build=x86_64-redhat-linux-gnu' '--host=x86_64-redhat-linux-gnu' '--target=x86_64-redhat-linux-gnu' '--program-prefix=' '--prefix=/usr' '--exec-prefix=/usr' '--bindir=/usr/bin' '--sbindir=/usr/sbin' '--sysconfdir=/etc' '--datadir=/usr/share' '--includedir=/usr/include' '--libdir=/usr/lib64' '--libexecdir=/usr/libexec' '--localstatedir=/var' '--sharedstatedir=/usr/com' '--mandir=/usr/share/man' '--infodir=/usr/share/info' '--cache-file=../config.cache' '--with-libdir=lib64' '--with-config-file-path=/etc' '--with-config-file-scan-dir=/etc/php.d' '--disable-debug' '--with-pic' '--disable-rpath' '--without-pear' '--with-bz2' '--with-exec-dir=/usr/bin' '--with-freetype-dir=/usr' '--with-png-dir=/usr' '--with-xpm-dir=/usr' '--enable-gd-native-ttf' '--without-gdbm' '--with-gettext' '--with-gmp' '--with-iconv' '--with-jpeg-dir=/usr' '--with-openssl' '--with-pcre-regex=/usr' '--with-zlib' '--with-layout=GNU' '--enable-exif' '--enable-ftp' '--enable-magic-quotes' '--enable-sockets' '--enable-sysvsem' '--enable-sysvshm' '--enable-sysvmsg' '--with-kerberos' '--enable-ucd-snmp-hack' '--enable-shmop' '--enable-calendar' '--without-mime-magic' '--without-sqlite' '--without-sqlite3' '--with-libxml-dir=/usr' '--enable-xml' '--with-system-tzdata' '--enable-force-cgi-redirect' '--enable-pcntl' '--with-imap=shared' '--with-imap-ssl' '--enable-mbstring=shared' '--enable-mbregex' '--with-gd=shared' '--enable-bcmath=shared' '--enable-dba=shared' '--with-db4=/usr' '--with-xmlrpc=shared' '--with-ldap=shared' '--with-ldap-sasl' '--with-mysql=shared,/usr' '--with-mysqli=shared,/usr/bin/mysql_config' '--enable-dom=shared' '--with-pgsql=shared' '--enable-wddx=shared' '--with-snmp=shared,/usr' '--enable-soap=shared' '--with-xsl=shared,/usr' '--enable-xmlreader=shared' '--enable-xmlwriter=shared' '--with-curl=shared,/usr' '--enable-fastcgi' '--enable-pdo=shared' '--with-pdo-odbc=shared,unixODBC,/usr' '--with-pdo-mysql=shared,/usr' '--with-pdo-pgsql=shared,/usr' '--with-pdo-sqlite=shared,/usr' '--with-pdo-dblib=shared,/usr' '--enable-json=shared' '--enable-zip=shared' '--with-readline' '--with-pspell=shared' '--enable-phar=shared' '--with-mcrypt=shared,/usr' '--with-tidy=shared,/usr' '--with-mssql=shared,/usr' '--enable-sysvmsg=shared' '--enable-sysvshm=shared' '--enable-sysvsem=shared' '--enable-posix=shared' '--with-unixODBC=shared,/usr' '--enable-fileinfo=shared' '--enable-intl=shared' '--with-icu-dir=/usr' '--with-recode=shared,/usr' /etc/php.d/pdo_sqlite.ini, /etc/php.d/sqlite3.ini, PHP Warning: Unknown: It is not safe to rely on the system's timezone settings. You are *required* to use the date.timezone setting or the date_default_timezone_set() function. In case you used any of those methods and you are still getting this warning, you most likely misspelled the timezone identifier. We selected 'Europe/Berlin' for 'CET/1.0/no DST' instead in Unknown on line 0 PDO drivers => mysql, sqlite pdo_sqlite PWD => /root/sqlite _SERVER["PWD"] => /root/sqlite _ENV["PWD"] => /root/sqlite

Read the article

Upgrading PHP from 5.1 to 5.2 on CentOS 5.4

- by andufo

i'm trying to upgrade php 5.1 to 5.2 on a CentOS 5.4 I use: yum upgrade php The result is this (check out the last part): [root@mail httpd]# yum update php Loaded plugins: fastestmirror Loading mirror speeds from cached hostfile * addons: mirror.raystedman.net * base: mirrors.serveraxis.net * centosplus: mirrors.tummy.com * contrib: mirror.raystedman.net * extras: mirror.raystedman.net * updates: mirrors.netdna.com Setting up Update Process Resolving Dependencies --> Running transaction check --> Processing Dependency: php = 5.1.6-27.el5 for package: php-devel --> Processing Dependency: php = 5.1.6 for package: php-eaccelerator ---> Package php.x86_64 0:5.2.10-1.el5.centos set to be updated --> Processing Dependency: php-cli = 5.2.10-1.el5.centos for package: php --> Processing Dependency: php-common = 5.2.10-1.el5.centos for package: php --> Running transaction check --> Processing Dependency: php = 5.1.6 for package: php-eaccelerator ---> Package php-cli.x86_64 0:5.2.10-1.el5.centos set to be updated --> Processing Dependency: php-common = 5.1.6-27.el5 for package: php-xml --> Processing Dependency: php-common = 5.1.6-27.el5 for package: php-pdo --> Processing Dependency: php-common = 5.1.6-27.el5 for package: php-gd --> Processing Dependency: php-common = 5.1.6-27.el5 for package: php-ldap --> Processing Dependency: php-common = 5.1.6-27.el5 for package: php-mbstring --> Processing Dependency: php-common = 5.1.6-27.el5 for package: php-mysql --> Processing Dependency: php-common = 5.1.6-27.el5 for package: php-imap ---> Package php-common.x86_64 0:5.2.10-1.el5.centos set to be updated ---> Package php-devel.x86_64 0:5.2.10-1.el5.centos set to be updated --> Running transaction check --> Processing Dependency: php = 5.1.6 for package: php-eaccelerator ---> Package php-gd.x86_64 0:5.2.10-1.el5.centos set to be updated ---> Package php-imap.x86_64 0:5.2.10-1.el5.centos set to be updated ---> Package php-ldap.x86_64 0:5.2.10-1.el5.centos set to be updated ---> Package php-mbstring.x86_64 0:5.2.10-1.el5.centos set to be updated ---> Package php-mysql.x86_64 0:5.2.10-1.el5.centos set to be updated ---> Package php-pdo.x86_64 0:5.2.10-1.el5.centos set to be updated ---> Package php-xml.x86_64 0:5.2.10-1.el5.centos set to be updated --> Finished Dependency Resolution php-eaccelerator-5.1.6_0.9.5.2-4.el5.rf.x86_64 from installed has depsolving problems --> Missing Dependency: php = 5.1.6 is needed by package php-eaccelerator-5.1.6_0.9.5.2-4.el5.rf.x86_64 (installed) Error: Missing Dependency: php = 5.1.6 is needed by package php-eaccelerator-5.1.6_0.9.5.2-4.el5.rf.x86_64 (installed) You could try using --skip-broken to work around the problem You could try running: package-cleanup --problems package-cleanup --dupes rpm -Va --nofiles --nodigest The program package-cleanup is found in the yum-utils package. [root@mail httpd]# What are the consequences of using --skip-broken? Any recommendations?

Read the article

Nagios notifications definitions

- by Colin

I am trying to monitor a web server in such a way that I want to search for a particular string on a page via http. The command is defined in command.cfg as follows # 'check_http-mysite command definition' define command { command_name check_http-mysite command_line /usr/lib/nagios/plugins/check_http -H mysite.example.com -s "Some text" } # 'notify-host-by-sms' command definition define command { command_name notify-host-by-sms command_line /usr/bin/send_sms $CONTACTPAGER$ "Nagios - $NOTIFICATIONTYPE$ :Host$HOSTALIAS$ is $HOSTSTATE$ ($OUTPUT$)" } # 'notify-service-by-sms' command definition define command { command_name notify-service-by-sms command_line /usr/bin/send_sms $CONTACTPAGER$ "Nagios - $NOTIFICATIONTYPE$: $HOSTALIAS$/$SERVICEDESC$ is $SERVICESTATE$ ($OUTPUT$)" } Now if nagios doesn't find "Some text" on the home page mysite.example.com, nagios should notify a contact via sms through the Clickatell http API which I have a script for that that I have tested and found that it works fine. Whenever I change the command definition to search for a string which is not on the page, and restart nagios, I can see on the web interface that the string was not found. What I don't understand is why isn't the notification sent though I have defined the host, hostgroup, contact, contactgroup and service and so forth. What I'm I missing, these are my definitions, In my web access through the cgi I can see that I have notifications have been defined and enabled though I don't get both email and sms notifications during hard status changes. host.cfg define host { use generic-host host_name HAL alias IBM-1 address xxx.xxx.xxx.xxx check_command check_http-mysite } *hostgroups_nagios2.cfg* # my website define hostgroup{ hostgroup_name my-servers alias All My Servers members HAL } *contacts_nagios2.cfg* define contact { contact_name colin alias Colin Y service_notification_period 24x7 host_notification_period 24x7 service_notification_options w,u,c,r,f,s host_notification_options d,u,r,f,s service_notification_commands notify-service-by-email,notify-service-by-sms host_notification_commands notify-host-by-email,notify-host-by-sms email [email protected] pager +254xxxxxxxxx } define contactgroup{ contactgroup_name site_admin alias Site Administrator members colin } *services_nagios2.cfg* # check for particular string in page via http define service { hostgroup_name my-servers service_description STRING CHECK check_command check_http-mysite use generic-service notification_interval 0 ; set > 0 if you want to be renotified contacts colin contact_groups site_admin } Could someone please tell me where I'm going wrong. Here are the generic-host and generic-service definitions *generic-service_nagios2.cfg* # generic service template definition define service{ name generic-service ; The 'name' of this service template active_checks_enabled 1 ; Active service checks are enabled passive_checks_enabled 1 ; Passive service checks are enabled/accepted parallelize_check 1 ; Active service checks should be parallelized (disabling this can lead to major performance problems) obsess_over_service 1 ; We should obsess over this service (if necessary) check_freshness 0 ; Default is to NOT check service 'freshness' notifications_enabled 1 ; Service notifications are enabled event_handler_enabled 1 ; Service event handler is enabled flap_detection_enabled 1 ; Flap detection is enabled failure_prediction_enabled 1 ; Failure prediction is enabled process_perf_data 1 ; Process performance data retain_status_information 1 ; Retain status information across program restarts retain_nonstatus_information 1 ; Retain non-status information across program restarts notification_interval 0 ; Only send notifications on status change by default. is_volatile 0 check_period 24x7 normal_check_interval 5 retry_check_interval 1 max_check_attempts 4 notification_period 24x7 notification_options w,u,c,r contact_groups site_admin register 0 ; DONT REGISTER THIS DEFINITION - ITS NOT A REAL SERVICE, JUST A TEMPLATE! } *generic-host_nagios2.cfg* define host{ name generic-host ; The name of this host template notifications_enabled 1 ; Host notifications are enabled event_handler_enabled 1 ; Host event handler is enabled flap_detection_enabled 1 ; Flap detection is enabled failure_prediction_enabled 1 ; Failure prediction is enabled process_perf_data 1 ; Process performance data retain_status_information 1 ; Retain status information across program restarts retain_nonstatus_information 1 ; Retain non-status information across program restarts max_check_attempts 10 notification_interval 0 notification_period 24x7 notification_options d,u,r contact_groups site_admin register 1 ; DONT REGISTER THIS DEFINITION - ITS NOT A REAL HOST, JUST A TEMPLATE! }

Read the article

Intermittent 404 on select assets, LAMP stack

- by Tom Lagier

We have a LAMP stack WordPress server that is serving most assets correctly. However, one plugin's CSS file and several images are returning soft 404s roughly 20% of the time. I can't find any reference to the 404 in the access logs, but the browser is definitely receiving a 404 response from somewhere (WordPress, I would assume). When I use an alias URL that does not match the site URL but does resolve to the asset path, the resource loads correctly 100% of the time. However, using the site url only resolves for the select, problematic assets 20% of the time. You can test one of the problematic assets here: http://www.mreco.org/wp-content/uploads/2014/05/zero-cost.jpg However the alias link always resolves correctly: http://mr-eco.wordpress.promocampaigns.com/wp-content/uploads/2014/05/zero-cost.jpg Stranger, if I attempt to access outdated content that definitely does not exist on the server, at the live URL it returns the content roughly 50% of the time. Using the alias link, it 404s 100% of the time - the correct behavior. Error log and PHP error log are clean. A sample access log (pulled from grep 'zero-cost.jpg' /var/log/httpd/mr-eco-access_log) from several refreshes of the live direct link (where I am not seeing any 404's): 10.166.202.202 - - [28/May/2014:20:27:41 +0000] "GET /wp-content/uploads/2014/05/zero-cost.jpg HTTP/1.1" 304 - 10.166.202.202 - - [28/May/2014:20:27:42 +0000] "GET /wp-content/uploads/2014/05/zero-cost.jpg HTTP/1.1" 304 - 10.166.202.202 - - [28/May/2014:20:27:43 +0000] "GET /wp-content/uploads/2014/05/zero-cost.jpg HTTP/1.1" 304 - 10.166.202.202 - - [28/May/2014:20:27:43 +0000] "GET /wp-content/uploads/2014/05/zero-cost.jpg HTTP/1.1" 304 - 10.176.201.37 - - [28/May/2014:20:27:56 +0000] "GET /wp-content/uploads/2014/05/zero-cost.jpg HTTP/1.1" 200 57027 Chrome's dev tools list the following network activity before displaying 404 page content: zero-cost.jpg /wp-content/uploads/2014/05 GET 404 Not Found text/html Other 15.9?KB 73.2?KB 953?ms 947?ms My Apache configuration is standard, I've listed the virtual host entry and .htaccess file below. I can provide other parts of Apache config if necessary. Virtual host: <VirtualHost *:80> DocumentRoot /var/www/public_html/mr-eco.wordpress.promocampaigns.com ServerName www.mreco.org ServerAlias mreco.org mr-eco.wordpress.promocampaigns.com ErrorLog logs/mr-eco-error_log CustomLog logs/mr-eco-access_log common <Directory /var/www/public_html/mr-eco.wordpress.promocampaigns.com> AllowOverride All SetOutputFilter DEFLATE </Directory> </VirtualHost> .htaccess: # BEGIN WordPress <IfModule mod_rewrite.c> RewriteEngine On RewriteBase / RewriteRule ^index\.php$ - [L] RewriteCond %{REQUEST_FILENAME} !-f RewriteCond %{REQUEST_FILENAME} !-d RewriteRule . /index.php [L] </IfModule> # END WordPress I have checked for multiple A records and can confirm that there is a single A record pointing at the domain: ;; ANSWER SECTION: mreco.org. 60 IN A 50.18.58.174 I'm fairly new to systems administration, and at a complete loss as to what could cause this. In the past, inconsistently 404ing assets have been because of out-of-sync instances behind a load balancer. In this case, it is a single instance behind the load balancer. Because of the inconsistency, it feels like a caching issue. We don't make use of Apache caching, and as far as I know WordPress should not be caching either. What I've done so far: Reset WordPress permalinks Disabled WordPress plugins Re-generated WordPress .htaccess file Swapped ServerName and ServerAlias directives Cleared browser cache Confirmed disk location of resources Checked PHP, access, and error logs Confirmed correct DNS setup (can post if necessary) I'm at a total loss. Thanks for helping me out!

Read the article

virturalmin webmin dose not respond

- by Miranda

I have installed Virtualmin on a CentOS remote server, but it dose not seem to work https://115.146.95.118:10000/ at least the Webmin page dose not work. I have opened those ports http ALLOW 80:80 from 0.0.0.0/0 ALLOW 443:443 from 0.0.0.0/0 ssh ALLOW 22:22 from 0.0.0.0/0 virtualmin ALLOW 20000:20000 from 0.0.0.0/0 ALLOW 10000:10009 from 0.0.0.0/0 And restarting Webmin dose not solve it: /etc/rc.d/init.d/webmin restart Stopping Webmin server in /usr/libexec/webmin Starting Webmin server in /usr/libexec/webmin And I have tried to use Amazon EC2 this time, still couldn't get it to work. http://ec2-67-202-21-21.compute-1.amazonaws.com:10000/ [ec2-user@ip-10-118-239-13 ~]$ netstat -an | grep :10000 tcp 0 0 0.0.0.0:10000 0.0.0.0:* LISTEN udp 0 0 0.0.0.0:10000 0.0.0.0:* [ec2-user@ip-10-118-239-13 ~]$ sudo iptables -L -n Chain INPUT (policy ACCEPT) target prot opt source destination ACCEPT udp -- 0.0.0.0/0 0.0.0.0/0 udp dpt:20 ACCEPT udp -- 0.0.0.0/0 0.0.0.0/0 udp dpt:21 ACCEPT udp -- 0.0.0.0/0 0.0.0.0/0 udp dpt:53 ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 tcp dpt:20000 ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 tcp dpt:10000 ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 tcp dpt:443 ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 tcp dpt:80 ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 tcp dpt:993 ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 tcp dpt:143 ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 tcp dpt:995 ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 tcp dpt:110 ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 tcp dpt:20 ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 tcp dpt:21 ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 tcp dpt:53 ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 tcp dpt:587 ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 tcp dpt:25 ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 tcp dpt:22 Chain FORWARD (policy ACCEPT) target prot opt source destination Chain OUTPUT (policy ACCEPT) target prot opt source destination Since I need more than 10 reputation to post image, you can find the screenshots of the security group setting at the Webmin Support Forum. I have tried: sudo iptables -A INPUT -p tcp -m tcp --dport 10000 -j ACCEPT It did not change anything. [ec2-user@ip-10-118-239-13 ~]$ sudo yum install openssl perl-Net-SSLeay perl-Crypt-SSLeay Loaded plugins: fastestmirror, priorities, security, update-motd Loading mirror speeds from cached hostfile * amzn-main: packages.us-east-1.amazonaws.com * amzn-updates: packages.us-east-1.amazonaws.com amzn-main | 2.1 kB 00:00 amzn-updates | 2.3 kB 00:00 Setting up Install Process Package openssl-1.0.0j-1.43.amzn1.i686 already installed and latest version Package perl-Net-SSLeay-1.35-9.4.amzn1.i686 already installed and latest version Package perl-Crypt-SSLeay-0.57-16.4.amzn1.i686 already installed and latest version Nothing to do [ec2-user@ip-10-118-239-13 ~]$ nano /etc/webmin/miniserv.conf GNU nano 2.0.9 File: /etc/webmin/miniserv.conf port=10000 root=/usr/libexec/webmin mimetypes=/usr/libexec/webmin/mime.types addtype_cgi=internal/cgi realm=Webmin Server logfile=/var/webmin/miniserv.log errorlog=/var/webmin/miniserv.error pidfile=/var/webmin/miniserv.pid logtime=168 ppath= ssl=1 env_WEBMIN_CONFIG=/etc/webmin env_WEBMIN_VAR=/var/webmin atboot=1 logout=/etc/webmin/logout-flag listen=10000 denyfile=\.pl$ log=1 blockhost_failures=5 blockhost_time=60 syslog=1 session=1 server=MiniServ/1.585 userfile=/etc/webmin/miniserv.users keyfile=/etc/webmin/miniserv.pem passwd_file=/etc/shadow passwd_uindex=0 passwd_pindex=1 passwd_cindex=2 passwd_mindex=4 passwd_mode=0 preroot=virtual-server-theme passdelay=1 sessiononly=/virtual-server/remote.cgi preload= mobile_preroot=virtual-server-mobile mobile_prefixes=m. mobile. anonymous=/virtualmin-mailman/unauthenticated=anonymous ssl_cipher_list=ECDHE-RSA-AES256-SHA384:AES256-SHA256:AES256-SHA256:RC4:HIGH:MEDIUM:+TLSv1:!MD5:!SSLv2:+SSLv3:!ADH:!aNULL:!eNULL:!NULL:!DH:!ADH:!EDH:!AESGCM

Read the article

How to debug solve 500 Internal error aws micro ec2 with suexec, Apache and php CGi

- by Oudin

I'm running WordPress multi-site on an amazon micro ec2 with suexec, Apache and php CGi On Ubuntu 12.04 However I've been experiencing a lot of Internal server 500 errors and I'm in the process of debugging it to find a solution. I've posted my error logs below example.com error.log: [Fri Oct 26 10:10:08 2012] [warn] [client 23.23.xxx.xx] (104)Connection reset by peer: mod_fcgid: error reading data from FastCGI server [Fri Oct 26 10:10:08 2012] [error] [client 23.23.xxx.xx] Premature end of script headers: wp-cron.php [Fri Oct 26 10:50:04 2012] [warn] [client 190.213.xxx.xxx] (104)Connection reset by peer: mod_fcgid: error reading data from FastCGI server, referer: https://www.example.com/wp-admin/ [Fri Oct 26 10:50:04 2012] [error] [client 190.213.xxx.xxx] Premature end of script headers: admin.php, referer: https://www.example.com/wp-admin/ [Fri Oct 26 10:58:14 2012] [warn] [client 190.213.xxx.xxx] (104)Connection reset by peer: mod_fcgid: error reading data from FastCGI server, referer: https://www.example.com/wp-admin/network/index.php [Fri Oct 26 10:58:15 2012] [error] [client 190.213.xxx.xxx] Premature end of script headers: admin-ajax.php, referer: https://www.example.com/wp-admin/network/index.php [Fri Oct 26 10:58:56 2012] [warn] [client 190.213.xxx.xxx] (104)Connection reset by peer: mod_fcgid: error reading data from FastCGI server, referer: https://www.example.com/wp-admin/network/index.php [Fri Oct 26 10:58:57 2012] [error] [client 190.213.xxx.xxx] Premature end of script headers: plugins.php, referer: https://www.example.com/wp-admin/network/index.php [Fri Oct 26 10:59:18 2012] [warn] [client 190.213.xxx.xxx] (104)Connection reset by peer: mod_fcgid: error reading data from FastCGI server, referer: https://www.example.com/wp-admin/network/index.php [Fri Oct 26 10:59:18 2012] [error] [client 190.213.xxx.xxx] Premature end of script headers: admin-ajax.php, referer: https://www.example.com/wp-admin/network/index.php [Fri Oct 26 11:01:49 2012] [warn] [client 190.213.xxx.xxx] (104)Connection reset by peer: mod_fcgid: error reading data from FastCGI server, referer: https://www.example.com/wp-admin/ [Fri Oct 26 11:01:49 2012] [warn] [client 190.213.xxx.xxx] (104)Connection reset by peer: mod_fcgid: ap_pass_brigade failed in handle_request_ipc function, referer: https://www.example.com/wp-admin/ Apache Log: php (pre-forking): Cannot allocate memory php (pre-forking): Cannot allocate memory Recipient names must be specified Recipient names must be specified php (pre-forking): Cannot allocate memory php (pre-forking): Cannot allocate memory php (pre-forking): Cannot allocate memory [Fri Oct 26 10:49:33 2012] [warn] mod_fcgid: cleanup zombie process 2852 [Fri Oct 26 10:49:33 2012] [warn] mod_fcgid: cleanup zombie process 2851 [Fri Oct 26 10:49:33 2012] [warn] mod_fcgid: cleanup zombie process 2853 [Fri Oct 26 10:58:22 2012] [warn] mod_fcgid: process 2892 graceful kill fail, sending SIGKILL php (pre-forking): Cannot allocate memory [Fri Oct 26 10:59:21 2012] [warn] mod_fcgid: process 2894 graceful kill fail, sending SIGKILL [Fri Oct 26 10:59:25 2012] [warn] mod_fcgid: process 2866 graceful kill fail, sending SIGKILL suexec.log: [2012-10-25 16:05:36]: uid: (1002/username) gid: (1002/username) cmd: php-fcgi [2012-10-25 18:09:38]: uid: (1002/username) gid: (1002/username) cmd: php-fcgi [2012-10-25 18:09:51]: uid: (1002/username) gid: (1002/username) cmd: php-fcgi [2012-10-25 18:14:03]: uid: (1002/username) gid: (1002/username) cmd: php-fcgi [2012-10-25 18:14:06]: uid: (1002/username) gid: (1002/username) cmd: php-fcgi [2012-10-25 18:14:35]: uid: (1002/username) gid: (1002/username) cmd: php-fcgi [2012-10-25 20:20:27]: uid: (1002/username) gid: (1002/username) cmd: php-fcgi [2012-10-25 20:20:29]: uid: (1002/username) gid: (1002/username) cmd: php-fcgi [2012-10-25 20:20:31]: uid: (1002/username) gid: (1002/username) cmd: php-fcgi [2012-10-25 21:42:12]: uid: (1002/username) gid: (1002/username) cmd: php-fcgi [2012-10-25 22:56:50]: uid: (1002/username) gid: (1002/username) cmd: php-fcgi [2012-10-26 02:34:43]: uid: (1002/username) gid: (1002/username) cmd: php-fcgi [2012-10-26 04:25:07]: uid: (1002/username) gid: (1002/username) cmd: php-fcgi [2012-10-26 06:35:19]: uid: (1002/username) gid: (1002/username) cmd: php-fcgi [2012-10-26 06:40:05]: uid: (1002/username) gid: (1002/username) cmd: php-fcgi [2012-10-26 07:22:45]: uid: (1002/username) gid: (1002/username) cmd: php-fcgi [2012-10-26 10:10:05]: uid: (1002/username) gid: (1002/username) cmd: php-fcgi [2012-10-26 10:49:24]: uid: (1002/username) gid: (1002/username) cmd: php-fcgi [2012-10-26 10:49:24]: uid: (1002/username) gid: (1002/username) cmd: php-fcgi based on the logs can any determine what might be the cause of this? Thinking that it might be the micro instance I'm thinking of upgrading to a small. Any help would be greatly appreciated.

Read the article

nginx + php-fpm cycle redirection error on linode new vps

- by chifliiiii

I'm new to nginx, and I'm trying to make my first server run. I followed this guide as I'm trying to use it for a multisite wordpress site. After installing everything, I get a 500 Internal server error. If I check logs, I see this: 012/09/27 08:55:54 [error] 11565#0: *8 rewrite or internal redirection cycle while internally redirecting to "/index.html", client: xxx.xxx.xxx.xxx, server: localhost, request: "GET /favicon.ico HTTP/1.1", host: "www.mydomain.com" 2012/09/27 08:59:32 [error] 11618#0: *1 rewrite or internal redirection cycle while internally redirecting to "/index.html", client: xxx.xxx.xxx.xxx, server: localhost, request: "GET /phpmyadmin HTTP/1.1", host: "www.mydomain.com" My conf files are the following: nano /etc/nginx/sites-available/mydomain.com server { listen 80 default_server; server_name mydomain.com *.mydomain.com; root /srv/www/aciup.com/public; access_log /srv/www/mydomain.com/log/access.log; error_log /srv/www/mydomain.com/log/error.log; location / { index index.php; try_files $uri $uri/ /index.php?$args; } # Add trailing slash to */wp-admin requests. rewrite /wp-admin$ $scheme://$host$uri/ permanent; # Directives to send expires headers and turn off 404 error logging. location ~* \.(js|css|png|jpg|jpeg|gif|ico)$ { expires 24h; log_not_found off; } # this prevents hidden files (beginning with a period) from being served location ~ /\. { access_log off; log_not_found off; deny all; } # Pass uploaded files to wp-includes/ms-files.php. rewrite /files/$ /index.php last; if ($uri !~ wp-content/plugins) { rewrite /files/(.+)$ /wp-includes/ms-files.php?file=$1 last; } # Rewrite multisite '.../wp-.*' and '.../*.php'. if (!-e $request_filename) { rewrite ^/[_0-9a-zA-Z-]+(/wp-.*) $1 last; rewrite ^/[_0-9a-zA-Z-]+.*(/wp-admin/.*\.php)$ $1 last; rewrite ^/[_0-9a-zA-Z-]+(/.*\.php)$ $1 last; } location ~ \.php$ { client_max_body_size 25M; fastcgi_pass unix:/var/run/php5-fpm.sock; fastcgi_index index.php; include /etc/nginx/fastcgi_params; } } nano /etc/nginx/nginx.conf user www-data; worker_processes 4; worker_cpu_affinity 0001 0010 0100 1000; error_log /var/log/nginx/error.log; pid /var/run/nginx.pid; events { worker_connections 2048; } http { include /etc/nginx/mime.types; access_log /var/log/nginx/access.log; sendfile on; tcp_nopush on; keepalive_timeout 5; tcp_nodelay on; server_tokens off; gzip on; gzip_types text/plain text/css application/x-javascript text/xml application/xml application/xml+rss text/javascript; gzip_disable "MSIE [1-6]\.(?!.*SV1)"; include /etc/nginx/conf.d/*.conf; include /etc/nginx/sites-enabled/*; } Any help will be appreciated.

Read the article

Installing chrome in Centos 6.2 (Final)

- by usjes

I need to install chrome in a dedicated centos server where I only access via ssh, it doesn't have X or any windows graphical stuff. I need it to be able to pack extensions using google-chrome --pack-extension. I tried adding this to /etc/yum.repos.d/google.repo [google-chrome] name=google-chrome - 32-bit baseurl=http://dl.google.com/linux/chrome/rpm/stable/i386 enabled=1 gpgcheck=1 gpgkey=https://dl-ssl.google.com/linux/linux_signing_key.pub And then yum install google-chrome-stable, but there's a huge list of dependencies problems: How can I install chrome without breaking anything else? UPDATE: Ok, I installed perl-CGI from .rpm because yum couldn't find it, now dependencies resolve and it show me this list of packages to install: Dependencies Resolved ============================================================================================================================================================================================================================================= Package Arch Version Repository Size ============================================================================================================================================================================================================================================= Installing: google-chrome-stable x86_64 19.0.1084.52-138391 google-chrome 35 M Installing for dependencies: ConsoleKit x86_64 0.4.1-3.el6 base 82 k ConsoleKit-libs x86_64 0.4.1-3.el6 base 17 k GConf2 x86_64 2.28.0-6.el6 base 964 k ORBit2 x86_64 2.14.17-3.1.el6 base 168 k bc x86_64 1.06.95-1.el6 base 110 k cdparanoia-libs x86_64 10.2-5.1.el6 base 47 k cups x86_64 1:1.4.2-44.el6_2.3 updates 2.3 M dbus x86_64 1:1.2.24-5.el6_1 base 207 k desktop-file-utils x86_64 0.15-9.el6 base 47 k ed x86_64 1.1-3.3.el6 base 72 k eggdbus x86_64 0.6-3.el6 base 91 k foomatic x86_64 4.0.4-1.el6_1.1 base 251 k foomatic-db noarch 4.0-7.20091126.el6 base 980 k foomatic-db-filesystem noarch 4.0-7.20091126.el6 base 4.4 k foomatic-db-ppds noarch 4.0-7.20091126.el6 base 19 M ghostscript x86_64 8.70-11.el6_2.6 updates 4.4 M ghostscript-fonts noarch 5.50-23.1.el6 base 751 k gstreamer x86_64 0.10.29-1.el6 base 764 k gstreamer-plugins-base x86_64 0.10.29-1.el6 base 942 k gstreamer-tools x86_64 0.10.29-1.el6 base 23 k iso-codes noarch 3.16-2.el6 base 2.4 M lcms-libs x86_64 1.19-1.el6 base 100 k libIDL x86_64 0.8.13-2.1.el6 base 83 k libXScrnSaver x86_64 1.2.0-1.el6 base 19 k libXfont x86_64 1.4.1-2.el6_1 base 128 k libXv x86_64 1.0.5-1.el6 base 21 k libfontenc x86_64 1.0.5-2.el6 base 24 k libgudev1 x86_64 147-2.40.el6 base 59 k libmng x86_64 1.0.10-4.1.el6 base 165 k libogg x86_64 2:1.1.4-2.1.el6 base 21 k liboil x86_64 0.3.16-4.1.el6 base 121 k libtheora x86_64 1:1.1.0-2.el6 base 129 k libvisual x86_64 0.4.0-9.1.el6 base 135 k libvorbis x86_64 1:1.2.3-4.el6_2.1 updates 168 k mailx x86_64 12.4-6.el6 base 234 k man x86_64 1.6f-29.el6 base 263 k mesa-libGLU x86_64 7.11-3.el6 base 201 k nvidia-graphics195.30-libs x86_64 195.30-120.el6 atrpms 13 M openjpeg-libs x86_64 1.3-7.el6 base 59 k pax x86_64 3.4-10.1.el6 base 69 k phonon-backend-gstreamer x86_64 1:4.6.2-20.el6 base 125 k polkit x86_64 0.96-2.el6_0.1 base 158 k poppler x86_64 0.12.4-3.el6_0.1 base 557 k poppler-data noarch 0.4.0-1.el6 base 2.2 M poppler-utils x86_64 0.12.4-3.el6_0.1 base 73 k portreserve x86_64 0.0.4-4.el6_1.1 base 22 k qt x86_64 1:4.6.2-20.el6 base 4.0 M qt-sqlite x86_64 1:4.6.2-20.el6 base 50 k qt-x11 x86_64 1:4.6.2-20.el6 base 12 M qt3 x86_64 3.3.8b-30.el6 base 3.5 M redhat-lsb x86_64 4.0-3.el6.centos base 24 k redhat-lsb-graphics x86_64 4.0-3.el6.centos base 12 k redhat-lsb-printing x86_64 4.0-3.el6.centos base 11 k sgml-common noarch 0.6.3-32.el6 base 43 k time x86_64 1.7-37.1.el6 base 26 k tmpwatch x86_64 2.9.16-4.el6 base 31 k xdg-utils noarch 1.0.2-17.20091016cvs.el6 base 58 k xml-common noarch 0.6.3-32.el6 base 9.5 k xorg-x11-font-utils x86_64 1:7.2-11.el6 base 75 k xz x86_64 4.999.9-0.3.beta.20091007git.el6 base 137 k xz-lzma-compat x86_64 4.999.9-0.3.beta.20091007git.el6 base 16 k Transaction Summary ============================================================================================================================================================================================================================================= Install 62 Package(s) Is it safe to continue and install all that or could I break something already installed?

Read the article

"The server closed the connection without sending any data"

- by Toby

Server setup The problem Diagnostic information What I've tried Specific Help needed 1. I have the following server setup: Debian Squeeze Linux 2.6.32-5-amd64 Apache2-mpm-prefork 2.2.16-6+squeeze10 PHP 5.3.3-7+squeeze14 This server is protected with the Suhosin Patch 0.9.9.1 Max Requests Per Child: 0 - Keep Alive: on - Max Per Connection: 100 Timeouts Connection: 300 - Keep-Alive: 15 Loaded Modules core mod_log_config mod_logio prefork http_core mod_so mod_alias mod_auth_basic mod_auth_digest mod_authn_file mod_authz_default mod_authz_groupfile mod_authz_host mod_authz_user mod_cgi mod_deflate mod_dir mod_env mod_mime mod_negotiation mod_php5 mod_reqtimeout mod_rewrite mod_setenvif mod_ssl mod_status Wordpress 3.4.2 (Upgrading to 3.5 soon :) 2. The problem When I restart the server (sudo shutdown -r now), going to any website page results in the following error from the web browser (in this case, Google Chrome, but other browsers also show the same error). This error can also occur an hour or so after all is working ok, seemingly randomly, which is my biggest concern as it means my server is not reliable: No data received Unable to load the web page because the server sent no data. Here are some suggestions: Reload this web page later. Error 324 (net::ERR_EMPTY_RESPONSE): The server closed the connection without sending any data. 3. Diagnostic information The apache error log contains the folowing entries: [Fri Dec 14 22:23:27 2012] [notice] child pid 1955 exit signal Floating point exception (8) [Fri Dec 14 22:23:27 2012] [notice] child pid 1956 exit signal Floating point exception (8) [Fri Dec 14 22:23:29 2012] [notice] child pid 1957 exit signal Floating point exception (8) [Fri Dec 14 22:23:30 2012] [notice] child pid 1958 exit signal Floating point exception (8) [Fri Dec 14 22:23:32 2012] [notice] child pid 1959 exit signal Floating point exception (8) [Fri Dec 14 22:23:32 2012] [notice] child pid 1960 exit signal Floating point exception (8) [Fri Dec 14 22:23:34 2012] [notice] child pid 1961 exit signal Floating point exception (8) [Fri Dec 14 22:23:34 2012] [notice] child pid 1962 exit signal Floating point exception (8) 4. What I've tried a) I can 'fix' the website temporarily by resetting the server twice (resetting it once does not work) using the following commands. NB: the 'reload' option does not work, I have to use restart twice. However, the error can reoccur sometime later. sudo /etc/init.d/apache2 restart sudo /etc/init.d/apache2 restart b) I have tried disabling suhosin by uninstalling php5-suhosin, but a php info page still shows "This server is protected with the Suhosin Patch 0.9.9.1". I have tried putting Suhosin into simulation mode by creating a file /etc/php5/apache2/conf.d/suhosin.ini containing: [suhosin] suhosin.simulation = On The php info page shows the suhosin.ini file in the list of "Additional .ini files parsed" but the php info page still shows "This server is protected with the Suhosin Patch 0.9.9.1" c) Increasing the PHP memory limit In /etc/php5/apache2/ : ; Maximum amount of memory a script may consume (128MB) ; http://php.net/memory-limit memory_limit = 512M d) Disabling all Wordpress plugins, and going back to the default theme. 5. Specific help needed I would very much like help in debugging what is going on here. I am not sure how to determine what processes are in the Apache error log which are exiting "[notice] child pid 1955 exit signal Floating point exception (8)", or what is causing them to exit. And whether suhosin is part of the problem (and how to disable it if it is). Thank you in advance for any advice or tips you can offer in helping me debug this.

Read the article

Installing EclipseFP on Mac OS X

- by Dom Kennedy

I am trying to install EclipseFP. I'm running OS X Mavericks. I've tried following both the official installation instructions and the advice in this answer on SU, but I'm still having the same problem. I can get the plugin itself installed painlessly using Help -> Install New Software..., Bbut when I restart and switch to the Haskell perspective, things start to go wrong. The installation instructions tells me that I should receive a prompt to install BuildWrapper and Scion Browser. I do not receive this prompt. Furthermore, if I create a new Haskell project, my code has no syntax highlighting, and the Hoogle search feature does not appear to do anything. It's clear that the plugin is not set up correctly yet. I've tried running cabal update in Terminal, but this does not change anything. After several attempts going round in circles with this on Eclipse Juno, I uninstalled Eclispe and the Haskell Platform and performed a clean install of Eclipse Luna and the latest Haskell Platform. However, the problems are persisting. I've tried going into Preferences to see if I could sort any of this out manually. I should initially point out that my GHC installation seems to be correctly references under Preferences -> Haskell Implementations Under Haskell -> Helper executables, there are areas for configuring the options of both BuildWrapper and Scion Browser. At present, both are blank. I tried clicking the Install from Hackage... button beside each of them with no success; I receive an error message saying Expected executable <workspace>/.metadata/.plugins/net.sf.eclipsefp.haskell.ui/sandbox/.cabal-sandbox/bin/buildwrapper not found!` (replace buildwrapper for scion-browser and the message is the same) The Eclipse console displays the following exception after doing the above with BuildWrapper: src/Language/Haskell/BuildWrapper/GHCStorage.hs:313:32: Not in scope: data constructor ‘MatchGroup’ cabal.real: Error: some packages failed to install: buildwrapper-0.7.4 failed during the building phase. The exception was: ExitFailure 1 and after doing it for Scion-Browser: zip-archive-0.2.3.4 (reinstall) changes: text-1.1.0.0 -> 0.11.3.1 pandoc-1.12.3.3 (latest: 1.13) -http-conduit (new version) Graphalyze-0.14.1.0 (reinstall) changes: pandoc-1.12.4.2 -> 1.12.3.3, text-1.1.0.0 -> 0.11.3.1 cabal.real: The following packages are likely to be broken by the reinstalls: pandoc-1.12.4.2 unordered-containers-0.2.4.0 aeson-0.7.0.4 scientific-0.2.0.2 case-insensitive-1.1.0.3 HTTP-4000.2.10 Use --force-reinstalls if you want to install anyway. After receiving similar results as the above on previous attempts, I've tried using force-reinstalls and ended up at more dead ends. I am at a loss as to what is wrong and how to solve this. I should point out that my GHC installation appears to be correctly configured under Preferences -> Haskell -> Haskell Implementations. Apologies if any of this information is irrelevant, I'm just not really sure what is important and what isn't at this point. Any help anyone could provide me with would be greatly appreciated.

Read the article

Log transport and aggregation at scale

- by markdrayton

How're you analysing log files from UNIX/Linux machines? We run several hundred servers which all generate their own log files, either directly or through syslog. I'm looking for a decent solution to aggregate these and pick out important events. This problem breaks down into 3 components: 1) Message transport The classic way is to use syslog to log messages to a remote host. This works fine for applications that log into syslog but less useful for apps that write to a local file. Solutions for this might include having the application log into a FIFO connected to a program to send the message using syslog, or by writing something that will grep the local files and send the output to the central syslog host. However, if we go to the trouble of writing tools to get messages into syslog would we be better replacing the whole lot with something like Facebook's Scribe which offers more flexibility and reliability than syslog? 2) Message aggregation Log entries seem to fall into one of two types: per-host and per-service. Per-host messages are those which occur on one machine; think disk failures or suspicious logins. Per-service messages occur on most or all of the hosts running a service. For instance, we want to know when Apache finds an SSI error but we don't want the same error from 100 machines. In all cases we only want to see one of each type of message: we don't want 10 messages saying the same disk has failed, and we don't want a message each time a broken SSI is hit. One approach to solving this is to aggregate multiple messages of the same type into one on each host, send the messages to a central server and then aggregate messages of the same kind into one overall event. SER can do this but it's awkward to use. Even after a couple of days of fiddling I had only rudimentary aggregations working and had to constantly look up the logic SER uses to correlate events. It's powerful but tricky stuff: I need something which my colleagues can pick up and use in the shortest possible time. SER rules don't meet that requirement. 3) Generating alerts How do we tell our admins when something interesting happens? Mail the group inbox? Inject into Nagios? So, how're you solving this problem? I don't expect an answer on a plate; I can work out the details myself but some high-level discussion on what is surely a common problem would be great. At the moment we're using a mishmash of cron jobs, syslog and who knows what else to find events. This isn't extensible, maintainable or flexible and as such we miss a lot of stuff we shouldn't. Updated: we're already using Nagios for monitoring which is great for detected down hosts/testing services/etc but less useful for scraping log files. I know there are log plugins for Nagios but I'm interested in something more scalable and hierarchical than per-host alerts.

Read the article

Ajax Control Toolkit December 2013 Release

- by Stephen.Walther

Today, we released a new version of the Ajax Control Toolkit that contains several important bug fixes and new features. The new release contains a new Tabs control that has been entirely rewritten in jQuery. You can download the December 2013 release of the Ajax Control Toolkit at http://Ajax.CodePlex.com. Alternatively, you can install the latest version directly from NuGet: The Ajax Control Toolkit and jQuery The Ajax Control Toolkit now contains two controls written with jQuery: the ToggleButton control and the Tabs control. The goal is to rewrite the Ajax Control Toolkit to use jQuery instead of the Microsoft Ajax Library gradually over time. The motivation for rewriting the controls in the Ajax Control Toolkit to use jQuery is to modernize the toolkit. We want to continue to accept new controls written for the Ajax Control Toolkit contributed by the community. The community wants to use jQuery. We want to make it easy for the community to submit bug fixes. The community understands jQuery. Using the Ajax Control Toolkit with a Website that Already uses jQuery But what if you are already using jQuery in your website? Will adding the Ajax Control Toolkit to your website break your existing website? No, and here is why. The Ajax Control Toolkit uses jQuery.noConflict() to avoid conflicting with an existing version of jQuery in a page. The version of jQuery that the Ajax Control Toolkit uses is represented by a variable named actJQuery. You can use actJQuery side-by-side with an existing version of jQuery in a page without conflict.Imagine, for example, that you add jQuery to an ASP.NET page using a <script> tag like this: <%@ Page Language="C#" AutoEventWireup="true" CodeBehind="WebForm1.aspx.cs" Inherits="TestACTDec2013.WebForm1" %> <!DOCTYPE html> <html > <head runat="server"> <title></title> </head> <body> <form id="form1" runat="server"> <div> <script src="Scripts/jquery-2.0.3.min.js"></script> <ajaxToolkit:ToolkitScriptManager runat="server" /> <ajaxToolkit:TabContainer runat="server"> <ajaxToolkit:TabPanel runat="server"> <HeaderTemplate> Tab 1 </HeaderTemplate> <ContentTemplate> <h1>First Tab</h1> </ContentTemplate> </ajaxToolkit:TabPanel> <ajaxToolkit:TabPanel runat="server"> <HeaderTemplate> Tab 2 </HeaderTemplate> <ContentTemplate> <h1>Second Tab</h1> </ContentTemplate> </ajaxToolkit:TabPanel> </ajaxToolkit:TabContainer> </div> </form> </body> </html> The page above uses the Ajax Control Toolkit Tabs control (TabContainer and TabPanel controls). The Tabs control uses the version of jQuery that is currently bundled with the Ajax Control Toolkit (jQuery version 1.9.1). The page above also includes a <script> tag that references jQuery version 2.0.3. You might need that particular version of jQuery, for example, to use a particular jQuery plugin. The two versions of jQuery in the page do not create a conflict. This fact can be demonstrated by entering the following two commands in the JavaScript console window: actJQuery.fn.jquery $.fn.jquery Typing actJQuery.fn.jquery will display the version of jQuery used by the Ajax Control Toolkit and typing $.fn.jquery (or jQuery.fn.jquery) will show the version of jQuery used by other jQuery plugins in the page. Preventing jQuery from Loading Twice So by default, the Ajax Control Toolkit will not conflict with any existing version of jQuery used in your application. However, this does mean that if you are already using jQuery in your application then jQuery will be loaded twice. For performance reasons, you might want to avoid loading the jQuery library twice. By taking advantage of the <remove> element in the AjaxControlToolkit.config file, you can prevent the Ajax Control Toolkit from loading its version of jQuery. <ajaxControlToolkit> <scripts> <remove name="jQuery.jQuery.js" /> </scripts> <controlBundles> <controlBundle> <control name="TabContainer" /> <control name="TabPanel" /> </controlBundle> </controlBundles> </ajaxControlToolkit> Be careful here: the name of the script being removed – jQuery.jQuery.js – is case-sensitive. If you remove jQuery then it is your responsibility to add the exact same version of jQuery back into your application. You can add jQuery back using a <script> tag like this: <script src="Scripts/jquery-1.9.1.min.js"></script> Make sure that you add the <script> tag before the server-side <form> tag or the Ajax Control Toolkit won’t detect the presence of jQuery. Alternatively, you can use the ToolkitScriptManager like this: <ajaxToolkit:ToolkitScriptManager runat="server"> <Scripts> <asp:ScriptReference Name="jQuery.jQuery.js" /> </Scripts> </ajaxToolkit:ToolkitScriptManager> The Ajax Control Toolkit is tested against the particular version of jQuery that is bundled with the Ajax Control Toolkit. Currently, the Ajax Control Toolkit uses jQuery version 1.9.1. If you attempt to use a different version of jQuery with the Ajax Control Toolkit then you will get the exception jQuery 1.9.1 is required in your JavaScript console window: If you need to use a different version of jQuery in the same page as the Ajax Control Toolkit then you should not use the <remove> element. Instead, allow the Ajax Control Toolkit to load its version of jQuery side-by-side with the other version of jQuery. Lots of Bug Fixes As usual, we implemented several important bug fixes with this release. The bug fixes concerned the following three controls: Tabs control – In the course of rewriting the Tabs control to use jQuery, we fixed several bugs related to the Tabs control. AjaxFileUpload control – We resolved an issue concerning the AjaxFileUpload and the TMP directory. HTMLEditor control – We updated the HTMLEditor control to use the new Ajax Control Toolkit bundling and minification framework. Summary I would like to thank the Superexpert team for their hard work on this release. Many long hours of coding and testing went into making this release possible.

Read the article

Using jQuery and SPServices to Display List Items

- by Bil Simser

I had an interesting challenge recently that I turned to Marc Anderson’s wonderful SPServices project for. If you haven’t already seen or used SPServices, please do. It’s a jQuery library that does primarily two things. First, it wraps up all of the SharePoint web services in a nice little AJAX wrapper for use in JavaScript. Second, it enhances the form editing of items in SharePoint so you’re not hacking up your List Form pages. My challenge was simple but interesting. The user wanted to display a SharePoint item page (DispForm.aspx, which already had some customization on it to display related items via this blog post from Codeless Solutions for SharePoint) but launch from an external application using the value of one of the fields in the SharePoint list. For simplicity let’s say my list is a list of customers and the related list is a list of orders for that customer. It would look something like this (click on the item to see the full image): Your first thought might be, that’s easy! Display the customer information using a DataView Web Part and filter the item using a query string to match the customer number. However there are a few problems with this idea: You’ll need to build a custom page and then attach that related orders view to it. This is a bit of a problem because the solution from Codeless Solutions relies on the Title field on the page to be displayed. On a custom page you would have to recreate all of the elements found on the DispForm.aspx page so the related view would work. The DataView Web Part doesn’t look *exactly* like what the out of the box display form page does. Not a huge problem and can be overcome with some CSS style overrides but still, more work. A DVWP showing a single record doesn’t have the same toolbar that you would using the DispForm.aspx. Not a show-stopper and you can rebuild the toolbar but it’s going to potentially require code and then there’s the security trimming, etc. that you have to get right. DVWPs are not automatically updated if you add a column to the list like DispForm.aspx is. Work, work, work. For these reasons I thought it would be easier to take the already existing (modified) DispForm.aspx page and just add some jQuery magic to the page to find the item. Why do we need to find it? DispForm.aspx relies on a querystring parameter called “ID” which then displays whatever that item ID number is in the list. Trouble is, when you’re coming in from an external app via a link, you don’t know what that internal ID is (and frankly shouldn’t). I don’t like exposing internal SharePoint IDs to the outside world for the same reason I don’t do it with database IDs. They’re internal and while it’s find to use on the site itself you don’t want external links using it. It’s volatile and can change (delete one item then re-add it back with the same data and watch any ID references break). The next thought might be to call a SharePoint web service with a CAML query to get the item ID number using some criteria (in this case, the customer number). That’s great if you have that ability but again we had an existing application we were just adding a link to. The last thing I wanted to do was to crack open the code on that sucker and start calling web services (primarily because it’s Java, but really I’m a lazy geek). However if you’re doing this and have access to call a web service that would be an option. Back to this problem, how do I a) find a SharePoint List Item based on some field value other than ID and b) make it low impact so I can just construct a URL to it? That’s where jQuery and SPServices came to the rescue. After spending a few hours of emails back and forth with Marc and a couple of phone calls (and updating jQuery to the latest version, duh!) it was a simple answer. First we need a reference to a) jQuery b) SPServices and c) our script. I just dropped a Content Editor Web Part, the Swiss Army Knives of Web Parts, onto the DispForm.aspx page and added these lines: <script type="text/javascript" src="http://intranet/JavaScript/jquery-1.4.2.min.js"></script> <script type="text/javascript" src="http://intranet/JavaScript/jquery.SPServices-0.5.3.min.js"></script> <script type="text/javascript" src="http://intranet/JavaScript/RedirectToID.js"> </script> Update it to point to where you keep your scripts located. I prefer to keep them all in Document Libraries as I can make changes to them without having to remote into the server (and on a multiple web front end, that’s just a PITA), it provides me with version control of sorts, and it’s quick to add new plugins and scripts. Now we can look at our RedirectToID.js script. This invokes the SPServices Library to call the GetListItems method of the Lists web service and then rewrites the URL to DispForm.aspx to use the correct SharePoint ID (the internal one). $(document).ready(function(){ var queryStringValues = $().SPServices.SPGetQueryString(); var id = queryStringValues["ID"]; if(id == "0") { var customer = queryStringValues["CustomerNumber"]; var query = "<Query><Where><Eq><FieldRef Name='CustomerNumber'/><Value Type='Text'>" + customer + "</Value></Eq></Where></Query>"; var url = window.location; $().SPServices({ operation: "GetListItems", listName: "Customers", async: false, CAMLQuery: query, completefunc: function (xData, Status) { $(xData.responseXML).find("[nodeName=z:row]").each(function(){ id = $(this).attr("ows_ID"); url = $().SPServices.SPGetCurrentSite() + "/Lists/Customers/DispForm.aspx?ID=" + id; window.location = url; }); } }); } }); What’s happening here? Line 3: We call SPServices.SPGetQueryString to get an array of query string values (a handy function in the library as I had 15 lines of code to do this which is now gone). Line 4: Extract the ID value from the query string Line 6: If we pass in “0” it means we’re looking up a field value. This allows DispForm.aspx to work like normal with SharePoint lists but lookup our values when invoked. Why ID at all? DispForm.aspx doesn’t work unless you pass in something and “0” is a *magic* number that will invoke the page but not lookup a value in the database. Line 8-15: Extract the CustomerNumber query string value, build a CAML query to find it then call the GetListitems method using SPServices Line 16: Process the results in our completefunc to iterate over all the rows (there should only be one) and extract the real ID of the item Line 17-20: Build a new URL based on the site (using a call to SPGetCurrentSite) and append our real ID to redirect to the DispForm.aspx page As you can see, it dynamically creates a CAML query for the call to the web service using the passed in value. You could even make this generic to take in different query strings, one for the field name to search for and the other for the value to find. That way it could be used for any field you want. For example you could bring up the correct item on the DispForm.aspx page based on customer name with something like this: http://myserver/Lists/Customers/DispForm.aspx?ID=0&FilterId=CustomerName&FilterValue=Sony Use your imagination. Some people would opt for building a custom page with a DVWP but if you want to leverage all the functionality of DispForm.aspx this might come in handy if you don’t want to rely on internal SharePoint IDs.

Read the article

Ajax Control Toolkit and Superexpert

- by Stephen Walther

Microsoft has asked my company, Superexpert Consulting, to take ownership of the development and maintenance of the Ajax Control Toolkit moving forward. In this blog entry, I discuss our strategy for improving the Ajax Control Toolkit. Why the Ajax Control Toolkit? The Ajax Control Toolkit is one of the most popular projects on CodePlex. In fact, some have argued that it is among the most successful open-source projects of all time. It consistently receives over 3,500 downloads a day (not weekends -- workdays). A mind-boggling number of developers use the Ajax Control Toolkit in their ASP.NET Web Forms applications. Why does the Ajax Control Toolkit continue to be such a popular project? The Ajax Control Toolkit fills a strong need in the ASP.NET Web Forms world. The Toolkit enables Web Forms developers to build richly interactive JavaScript applications without writing any JavaScript. For example, by taking advantage of the Ajax Control Toolkit, a Web Forms developer can add modal dialogs, popup calendars, and client tabs to a web application simply by dragging web controls onto a page. The Ajax Control Toolkit is not for everyone. If you are comfortable writing JavaScript then I recommend that you investigate using jQuery plugins instead of the Ajax Control Toolkit. However, if you are a Web Forms developer and you don’t want to get your hands dirty writing JavaScript, then the Ajax Control Toolkit is a great solution. The Ajax Control Toolkit is Vast The Ajax Control Toolkit consists of 40 controls. That’s a lot of controls (For the sake of comparison, jQuery UI consists of only 8 controls – those slackers J). Furthermore, developers expect the Ajax Control Toolkit to work on browsers both old and new. For example, people expect the Ajax Control Toolkit to work with Internet Explorer 6 and Internet Explorer 9 and every version of Internet Explorer in between. People also expect the Ajax Control Toolkit to work on the latest versions of Mozilla Firefox, Apple Safari, and Google Chrome. And, people expect the Ajax Control Toolkit to work with different operating systems. Yikes, that is a lot of combinations. The biggest challenge which my company faces in supporting the Ajax Control Toolkit is ensuring that the Ajax Control Toolkit works across all of these different browsers and operating systems. Testing, Testing, Testing Because we wanted to ensure that we could easily test the Ajax Control Toolkit with different browsers, the very first thing that we did was to set up a dedicated testing server. The dedicated server -- named Schizo -- hosts 4 virtual machines so that we can run Internet Explorer 6, Internet Explorer 7, Internet Explorer 8, and Internet Explorer 9 at the same time (We also use the virtual machines to host the latest versions of Firefox, Chrome, Opera, and Safari). The five developers on our team (plus me) can each publish to a separate FTP website on the testing server. That way, we can quickly test how changes to the Ajax Control Toolkit affect different browsers. QUnit Tests for the Ajax Control Toolkit Introducing regressions – introducing new bugs when trying to fix existing bugs – is the concern which prevents me from sleeping well at night. There are so many people using the Ajax Control Toolkit in so many unique scenarios, that it is difficult to make improvements to the Ajax Control Toolkit without introducing regressions. In order to avoid regressions, we decided early on that it was extremely important to build good test coverage for the 40 controls in the Ajax Control Toolkit. We’ve been focusing a lot of energy on building automated JavaScript unit tests which we can use to help us discover regressions. We decided to write the unit tests with the QUnit test framework. We picked QUnit because it is quickly becoming the standard unit testing framework in the JavaScript world. For example, it is the unit testing framework used by the jQuery team, the jQuery UI team, and many jQuery UI plugin developers. We had to make several enhancements to the QUnit framework in order to test the Ajax Control Toolkit. For example, QUnit does not support tests which include postbacks. We modified the QUnit framework so that it works with IFrames so we could perform postbacks in our automated tests. At this point, we have written hundreds of QUnit tests. For example, we have written 135 QUnit tests for the Accordion control. The QUnit tests are included with the Ajax Control Toolkit source code in a project named AjaxControlToolkit.Tests. You can run all of the QUnit tests contained in the project by opening the Default.aspx page. Automating the QUnit Tests across Multiple Browsers Automated tests are useless if no one ever runs them. In order for the QUnit tests to be useful, we needed an easy way to run the tests automatically against a matrix of browsers. We wanted to run the unit tests against Internet Explorer 6, Internet Explorer 7, Internet Explorer 8, Internet Explorer 9, Firefox, Chrome, and Safari automatically. Expecting a developer to run QUnit tests against every browser after every check-in is just too much to expect. It takes 20 seconds to run the Accordion QUnit tests. We are testing against 8 browsers. That would require the developer to open 8 browsers and wait for the results after each change in code. Too much work. Therefore, we built a JavaScript Test Server. Our JavaScript Test Server project was inspired by John Resig’s TestSwarm project. The JavaScript Test Server runs our QUnit tests in a swarm of browsers (running on different operating systems) automatically. Here’s how the JavaScript Test Server works: 1. We created an ASP.NET page named RunTest.aspx that constantly polls the JavaScript Test Server for a new set of QUnit tests to run. After the RunTest.aspx page runs the QUnit tests, the RunTest.aspx records the test results back to the JavaScript Test Server. 2. We opened the RunTest.aspx page on instances of Internet Explorer 6, Internet Explorer 7, Internet Explorer 8, Internet Explorer 9, FireFox, Chrome, Opera, Google, and Safari. Now that we have the JavaScript Test Server setup, we can run all of our QUnit tests against all of the browsers which we need to support with a single click of a button. A New Release of the Ajax Control Toolkit Each Month The Ajax Control Toolkit Issue Tracker contains over one thousand five hundred open issues and feature requests. So we have plenty of work on our plates J At CodePlex, anyone can vote for an issue to be fixed. Originally, we planned to fix issues in order of their votes. However, we quickly discovered that this approach was inefficient. Constantly switching back and forth between different controls was too time-consuming. It takes time to re-familiarize yourself with a control. Instead, we decided to focus on two or three controls each month and really focus on fixing the issues with those controls. This way, we can fix sets of related issues and avoid the randomization caused by context switching. Our team works in monthly sprints. We plan to do another release of the Ajax Control Toolkit each and every month. So far, we have competed one release of the Ajax Control Toolkit which was released on April 1, 2011. We plan to release a new version in early May. Conclusion Fortunately, I work with a team of smart developers. We currently have 5 developers working on the Ajax Control Toolkit (not full-time, they are also building two very cool ASP.NET MVC applications). All the developers who work on our team are required to have strong JavaScript, jQuery, and ASP.NET MVC skills. In the interest of being as transparent as possible about our work on the Ajax Control Toolkit, I plan to blog frequently about our team’s ongoing work. In my next blog entry, I plan to write about the two Ajax Control Toolkit controls which are the focus of our work for next release.

Read the article

The Windows Browser Ballot Screen Offers Web Browser Choice to European Users

- by Matthew Guay

Since March, our friends across the pond in Europe get to decide which browser they want to install with their Windows OS. Today we thought we would take a look at the ballot choices, some are well known, and others you may not have heard of. Windows users in European countries should start seeing the so called “Browser Ballot Screen” after installing the Windows Update KB976002 (link below). The browser ballot offers a dozen different browsers, including some you’ve likely never heard of. They each have some unique features, and are all free, and here we take a quick look at each of them. Internet Explorer 8 Internet Explorer is the world’s most used web browser, as it’s bundled with Windows. It also includes several unique features, including Accelerators that make it easy to search or find a map of a location, and InPrivate filtering to directly control what sites can get personal information. Additionally, it offers great integration with Windows Touch and the new taskbar in Windows 7. IE 8 runs on Windows XP and newer, and is bundled with Windows 7. Mozilla Firefox 3.6 Firefox is the most popular browser other than Internet Explorer. It is the modern descendant of Netscape, and is loved by web developers for its adherence to web standards, openness, and expandability. It offers thousands of Add-ons and themes to let you customize it to fit your preferences. The most recent version has added Personas, which are quick, lightweight themes to let you personalize the look your browser. It’s open source, and runs on all modern versions of Windows, Mac OS X, and Linux. Of course thanks to Asian Angel, our resident browser expert, you can check out several articles regarding this popular IE alternative. Google Chrome 4 Google Chrome has gained an impressive amount of market share during its short time in the market. It offers a minimalistic interface and fast speeds with intensive web applications. The address bar is also a search bar, so you can enter a search query or web address and quickly get the information you need. With version 4 you can add a growing number of extensions, personalize it with a variety of stylish themes, and automatically translate foreign websites into your own language. Opera 10.50 Although Opera has been around for over a decade, relatively few users have used it. With the new 10.50 release, Opera has many unique features packed in a sleek UI. It integrates great with Aero and the Windows 7 taskbar, and lets you preview the contents of your websites in the tab bar. It also includes Opera Unite, a small personal web server to make file sharing easy, Opera Turbo to speed up your internet when the connection is slow, and Opera Link to keep all your copies of Opera in sync. It’s a popular browser on many mobile devices, and version 10.50 has a lot of enhancements. Apple Safari 4 Safari is the default browser in Mac OS X, and starting with version 3 it has been available for Windows as well. It’s based on Webkit, the popular new rendering engine that provides great speed and standards compatibility. Safari 4 lets you browse your browsing history in a unique Coverflow interface, and shows your Top Sites in a fancy, 3D interface. It’s also great for viewing mobile websites for the iPhone and other mobile devices through Developer Tools. Flock 2.5 Based on the popular Firefox core, Flock brings a multitude of social features to your browsing experience. You can view the latest YouTube videos, Flickr pictures, update your favorite social network, and keep up with your webmail thanks to It’s integration with a wide variety of services. You can even post to your blog through the integrated blog editor. If your time online is mostly spent in social services, this may be a browser you want to check out. Maxthon 2.5 Maxthon is a unique browser that builds on Internet Explorer to bring more features with IE’s rendering. Formerly known as MyIE2, Maxthon was popular for bringing tabbed browsing with IE rendering during the days of IE 6. Today Maxthon supports a wide range of plugins and skins, so you can customize it however you want. It includes mouse gestures, a web accelerator to speed up pokey internet connections, a content blocker to remove unwanted content from sites, an online account to backup your favorites, and a nice download manager. Avant Browser Another nice browser based on Internet Explorer, Avant brings a wide variety of features in a nice brushed-metal interface. It includes an integrated AutoFill for forms, mouse gestures, customizable skins, and privacy protection features. It also includes a Flash blocker that will only load flash in webpages when you select them. You can also integrate Avant with an online account to store your bookmarks, feeds, settings and passwords online. Sleipnir Sleipnir is a customizable browser meant for advance users that is quite popular in Japan. It’s built on the Trident engine and virtually every aspect of is customizable unlike Internet Explorer. FlashPeak SlimBrowser SlimBrowser from FlashPeak incorporates a lot of features like Popup Killer, Auto Login, site filtering and more. It’s based on Internet Explorer but offers a lot more customizable options out of the box. K-meleon This basic browser is light on system resources and based on the Gecko engine. It’s been in development for years on SourceForge, and if you like to tweak virtually any aspect of your browser, this might be a good choice for you. GreenBrowser GreenBrowser is based on Internet Explorer and is available in several languages. It has a large amount of features out of the box and is light on system resources. Conclusion The European Union asked for more choices in the web browser they could choose from when installing Windows, and with the Browser Ballot Screen, they certainly get a variety to choose from. If you’ve tried out some of the lesser known browsers, or think some important ones have been left out, leave a comment and tell us about it. Learn More About the Browser Ballot Screen and Download Alternatives to IE Windows Update KB976002 Similar Articles Productive Geek Tips Set the Default Browser on Ubuntu From the Command LineQuick Tip: Empty Internet Explorer 7 Cache when Browser is ClosedView Hidden Files and Folders in Ubuntu File BrowserSet the Default Browser and Email Client in UbuntuAccess Multiple Browsers from Firefox with Browser View Plus TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 PCmover Professional Play Music in Chrome by Simply Dragging a File 15 Great Illustrations by Chow Hon Lam Easily Sync Files & Folders with Friends & Family Amazon Free Kindle for PC Download Stretch popurls.com with a Stylish Script (Firefox) OldTvShows.org – Find episodes of Hitchcock, Soaps, Game Shows and more

Read the article

Install Ubuntu Netbook Edition with Wubi Installer

- by Matthew Guay

Ubuntu is one of the most popular versions of Linux, and their Netbook Remix edition is especially attractive for netbook owners. Here we’ll look at how you can easily try out Ubuntu on your netbook without a CD/DVD drive. Netbooks, along with the growing number of thin, full powered laptops, lack a CD/DVD drive. Installing software isn’t much of a problem since most programs, whether free or for-pay, are available for download. Operating systems, however, are usually installed from a disk. You can easily install Windows 7 from a flash drive with our tutorial, but installing Ubuntu from a USB flash drive is more complicated. However, using Wubi, a Windows installer for Ubuntu, you can easily install it directly on your netbook and even uninstall it with only a few clicks. Getting Started Download and run the Wubi installer for Ubuntu (link below). In the installer, select the drive you where you wish to install Ubuntu, the size of the installation (this is the amount dedicated to Ubuntu; under 20Gb should be fine), language, username, and desired password. Also, from the Desktop environment menu, select Ubuntu Netbook to install the netbook edition. Click Install when your settings are correct. Wubi will automatically download the selected version of Ubuntu and install it on your computer. Windows Firewall may ask if you want to unblock Wubi; select your network and click Allow access. The download will take around an hour on broadband, depending on your internet connection speed. Once the download is completed, it will automatically install to your computer. If you’d prefer to have everything downloaded before you start the install, download the ISO of Ubuntu Netbook edition (link below) and save it in the same folder as Wubi. Then, when you run Wubi, select the netbook edition as before and click Install. Wubi will verify that your download is valid, and will then proceed to install from the downloaded ISO. This install will only take about 10 minutes. Once the install is finished you will be asked to reboot your computer. Save anything else you’re working on, and then reboot to finish setting up Ubuntu on your netbook. When your computer reboots, select Ubuntu at the boot screen. Wubi leaves the default OS as Windows 7, so if you don’t select anything it will boot into Windows 7 after a few seconds. Ubuntu will automatically finish the install when you boot into it the first time. This took about 12 minutes in our test. When the setup is finished, your netbook will reboot one more time. Remember again to select Ubuntu at the boot screen. You’ll then see a second boot screen; press your Enter key to select the default. Ubuntu only took less than a minute to boot in our test. When you see the login screen, select your name and enter your password you setup in Wubi. Now you’re ready to start exploring Ubuntu Netbook Remix. Using Ubuntu Netbook Remix Ubuntu Netbook Remix offers a simple, full-screen interface to take the best advantage of netbooks’ small screens. Pre-installed applications are displayed in the application launcher, and are organized by category. Click once to open an application. The first screen on the application launcher shows your favorite programs. If you’d like to add another application to the favorites pane, click the plus sign beside its icon. Your files from Windows are still accessible from Ubuntu Netbook Remix. From the home screen, select Files & Folders on the left menu, and then click the icon that says something like 100GB Filesystem under the Volumes section. Now you’ll be able to see all of your files from Windows. Your user files such as documents, music, and pictures should be located in Documents and Settings in a folder with your user name. You can also easily install a variety of free applications via the Software Installer. Connecting to the internet is also easy, as Ubuntu Netbook Remix automatically recognized the WiFi adaptor on our test netbook, a Samsung N150. To connect to a wireless network, click the wireless icon on the top right of the screen and select the network’s name from the list. And, if you’d like to customize your screen, right-click on the application launcher and select Change desktop background. Choose a background picture you’d like. Now you’ll see it through your application launcher. Nice! Most applications are opened full-screen. You can close them by clicking the x on the right of the program’s name. You can also switch to other applications from their icons on the top left. Open the home screen by clicking the Ubuntu logo in the far left. Changing Boot Options By default, Wubi will leave Windows as the default operating system, and will give you 10 seconds at boot to choose to boot into Ubuntu. To change this, boot into Windows and enter Advanced system settings in your start menu search. In this dialog, click Settings under Startup and Recovery. From this dialog, you can select the default operating system and the time to display list of operating systems. You can enter a lower number to make the boot screen appear for less time. And if you’d rather make Ubuntu the default operating system, select it from the drop-down list. Uninstalling Ubuntu Netbook Remix If you decide you don’t want to keep Ubuntu Netbook Remix on your computer, you can uninstall it just like you uninstall any normal application. Boot your computer into Windows, open Control Panel, click Uninstall a Program, and enter ubuntu in the search box. Select it, and click Uninstall. Click Uninstall at the prompt. Ubuntu uninstalls very quickly, and removes the entry from the bootloader as well, so your computer is just like it was before you installed it. Conclusion Ubuntu Netbook Remix offers an attractive Linux interface for netbooks. We enjoyed trying it out, and found it much more user-friendly than most Linux distros. And with the Wubi installer, you can install it risk-free and try it out on your netbook. Or, if you’d like to try out another alternate netbook operating system, check out our article on Jolicloud, another new OS for netbooks. Links Download Wubi Installer for Windows Download Ubuntu Netbook Edition Similar Articles Productive Geek Tips Easily Install Ubuntu Linux with Windows Using the Wubi InstallerInstall VMware Tools on Ubuntu Edgy EftHow to install Spotify in Ubuntu 9.10 using WineInstalling PHP5 and Apache on UbuntuInstalling PHP4 and Apache on Ubuntu TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips VMware Workstation 7 Acronis Online Backup DVDFab 6 Revo Uninstaller Pro Explorer++ is a Worthy Windows Explorer Alternative Error Goblin Explains Windows Error Codes Twelve must-have Google Chrome plugins Cool Looking Skins for Windows Media Player 12 Move the Mouse Pointer With Your Face Movement Using eViacam Boot Windows Faster With Boot Performance Diagnostics

Search Results

Search found 5399 results on 216 pages for 'netbeans plugins'.

Page 207/216 | < Previous Page | 203 204 205 206 207 208 209 210 211 212 213 214 | Next Page >

- by Dave

- by user2626673

- by seansean11

- by connerb

- by James Marthenal

- by Tucker

- by komidore64

- by Favolas

- by Suma

- by Kevin

- by andufo

- by Colin

- by Tom Lagier

- by Miranda

- by Oudin

- by chifliiiii

- by usjes

- by Toby

- by Dom Kennedy

- by markdrayton

- by Stephen.Walther

- by Bil Simser

- by Stephen Walther

- by Matthew Guay

- by Matthew Guay

< Previous Page | 203 204 205 206 207 208 209 210 211 212 213 214 | Next Page >