Search Results

Search found 28469 results on 1139 pages for 'select statement'.

Page 207/1139 | < Previous Page | 203 204 205 206 207 208 209 210 211 212 213 214 | Next Page >

Optimizing Levenshtein Distance Algorithm

- by Matt

I have a stored procedure that uses Levenshtein Distance to determine the result closest to what the user typed. The only thing really affecting the speed is the function that calculates the Levenshtein Distance for all the records before selecting the record with the lowest distance (I've verified this by putting a 0 in place of the call to the Levenshtein function). The table has 1.5 million records, so even the slightest adjustment may shave off a few seconds. Right now the entire thing runs over 10 minutes. Here's the method I'm using: ALTER function dbo.Levenshtein ( @Source nvarchar(200), @Target nvarchar(200) ) RETURNS int AS BEGIN DECLARE @Source_len int, @Target_len int, @i int, @j int, @Source_char nchar, @Dist int, @Dist_temp int, @Distv0 varbinary(8000), @Distv1 varbinary(8000) SELECT @Source_len = LEN(@Source), @Target_len = LEN(@Target), @Distv1 = 0x0000, @j = 1, @i = 1, @Dist = 0 WHILE @j <= @Target_len BEGIN SELECT @Distv1 = @Distv1 + CAST(@j AS binary(2)), @j = @j + 1 END WHILE @i <= @Source_len BEGIN SELECT @Source_char = SUBSTRING(@Source, @i, 1), @Dist = @i, @Distv0 = CAST(@i AS binary(2)), @j = 1 WHILE @j <= @Target_len BEGIN SET @Dist = @Dist + 1 SET @Dist_temp = CAST(SUBSTRING(@Distv1, @j+@j-1, 2) AS int) + CASE WHEN @Source_char = SUBSTRING(@Target, @j, 1) THEN 0 ELSE 1 END IF @Dist > @Dist_temp BEGIN SET @Dist = @Dist_temp END SET @Dist_temp = CAST(SUBSTRING(@Distv1, @j+@j+1, 2) AS int)+1 IF @Dist > @Dist_temp SET @Dist = @Dist_temp BEGIN SELECT @Distv0 = @Distv0 + CAST(@Dist AS binary(2)), @j = @j + 1 END END SELECT @Distv1 = @Distv0, @i = @i + 1 END RETURN @Dist END Anyone have any ideas? Any input is appreciated. Thanks, Matt

Read the article
Metro: Understanding the default.js File

- by Stephen.Walther

The goal of this blog entry is to describe — in painful detail — the contents of the default.js file in a Metro style application written with JavaScript. When you use Visual Studio to create a new Metro application then you get a default.js file automatically. The file is located in a folder named \js\default.js. The default.js file kicks off all of your custom JavaScript code. It is the main entry point to a Metro application. The default contents of the default.js file are included below: // For an introduction to the Blank template, see the following documentation: // http://go.microsoft.com/fwlink/?LinkId=232509 (function () { "use strict"; var app = WinJS.Application; app.onactivated = function (eventObject) { if (eventObject.detail.kind === Windows.ApplicationModel.Activation.ActivationKind.launch) { if (eventObject.detail.previousExecutionState !== Windows.ApplicationModel.Activation.ApplicationExecutionState.terminated) { // TODO: This application has been newly launched. Initialize // your application here. } else { // TODO: This application has been reactivated from suspension. // Restore application state here. } WinJS.UI.processAll(); } }; app.oncheckpoint = function (eventObject) { // TODO: This application is about to be suspended. Save any state // that needs to persist across suspensions here. You might use the // WinJS.Application.sessionState object, which is automatically // saved and restored across suspension. If you need to complete an // asynchronous operation before your application is suspended, call // eventObject.setPromise(). }; app.start(); })(); There are several mysterious things happening in this file. The purpose of this blog entry is to dispel this mystery. Understanding the Module Pattern The first thing that you should notice about the default.js file is that the entire contents of this file are enclosed within a self-executing JavaScript function: (function () { ... })(); Metro applications written with JavaScript use something called the module pattern. The module pattern is a common pattern used in JavaScript applications to create private variables, objects, and methods. Anything that you create within the module is encapsulated within the module. Enclosing all of your custom code within a module prevents you from stomping on code from other libraries accidently. Your application might reference several JavaScript libraries and the JavaScript libraries might have variables, objects, or methods with the same names. By encapsulating your code in a module, you avoid overwriting variables, objects, or methods in the other libraries accidently. Enabling Strict Mode with “use strict” The first statement within the default.js module enables JavaScript strict mode: 'use strict'; Strict mode is a new feature of ECMAScript 5 (the latest standard for JavaScript) which enables you to make JavaScript more strict. For example, when strict mode is enabled, you cannot declare variables without using the var keyword. The following statement would result in an exception: hello = "world!"; When strict mode is enabled, this statement throws a ReferenceError. When strict mode is not enabled, a global variable is created which, most likely, is not what you want to happen. I’d rather get the exception instead of the unwanted global variable. The full specification for strict mode is contained in the ECMAScript 5 specification (look at Annex C): http://www.ecma-international.org/publications/files/ECMA-ST/ECMA-262.pdf Aliasing the WinJS.Application Object The next line of code in the default.js file is used to alias the WinJS.Application object: var app = WinJS.Application; This line of code enables you to use a short-hand syntax when referring to the WinJS.Application object: for example, app.onactivated instead of WinJS.Application.onactivated. The WinJS.Application object represents your running Metro application. Handling Application Events The default.js file contains an event handler for the WinJS.Application activated event: app.onactivated = function (eventObject) { if (eventObject.detail.kind === Windows.ApplicationModel.Activation.ActivationKind.launch) { if (eventObject.detail.previousExecutionState !== Windows.ApplicationModel.Activation.ApplicationExecutionState.terminated) { // TODO: This application has been newly launched. Initialize // your application here. } else { // TODO: This application has been reactivated from suspension. // Restore application state here. } WinJS.UI.processAll(); } }; This WinJS.Application class supports the following events: · loaded – Happens after browser DOMContentLoaded event. After this event, the DOM is ready and you can access elements in a page. This event is raised before external images have been loaded. · activated – Triggered by the Windows.UI.WebUI.WebUIApplication activated event. After this event, the WinRT is ready. · ready – Happens after both loaded and activated events. · unloaded – Happens before application is unloaded. The following default.js file has been modified to capture each of these events and write a message to the Visual Studio JavaScript Console window: (function () { "use strict"; var app = WinJS.Application; WinJS.Application.onloaded = function (e) { console.log("Loaded"); }; WinJS.Application.onactivated = function (e) { console.log("Activated"); }; WinJS.Application.onready = function (e) { console.log("Ready"); } WinJS.Application.onunload = function (e) { console.log("Unload"); } app.start(); })(); When you execute the code above, a message is written to the Visual Studio JavaScript Console window when each event occurs with the exception of the Unload event (presumably because the console is not attached when that event is raised). Handling Different Activation Contexts The code for the activated handler in the default.js file looks like this: app.onactivated = function (eventObject) { if (eventObject.detail.kind === Windows.ApplicationModel.Activation.ActivationKind.launch) { if (eventObject.detail.previousExecutionState !== Windows.ApplicationModel.Activation.ApplicationExecutionState.terminated) { // TODO: This application has been newly launched. Initialize // your application here. } else { // TODO: This application has been reactivated from suspension. // Restore application state here. } WinJS.UI.processAll(); } }; Notice that the code contains a conditional which checks the Kind of the event (the value of e.detail.kind). The startup code is executed only when the activated event is triggered by a Launch event, The ActivationKind enumeration has the following values: · launch · search · shareTarget · file · protocol · fileOpenPicker · fileSavePicker · cacheFileUpdater · contactPicker · device · printTaskSettings · cameraSettings Metro style applications can be activated in different contexts. For example, a camera application can be activated when modifying camera settings. In that case, the ActivationKind would be CameraSettings. Because we want to execute our JavaScript code when our application first launches, we verify that the kind of the activation event is an ActivationKind.Launch event. There is a second conditional within the activated event handler which checks whether an application is being newly launched or whether the application is being resumed from a suspended state. When running a Metro application with Visual Studio, you can use Visual Studio to simulate different application execution states by taking advantage of the Debug toolbar and the new Debug Location toolbar. Handling the checkpoint Event The default.js file also includes an event handler for the WinJS.Application checkpoint event: app.oncheckpoint = function (eventObject) { // TODO: This application is about to be suspended. Save any state // that needs to persist across suspensions here. You might use the // WinJS.Application.sessionState object, which is automatically // saved and restored across suspension. If you need to complete an // asynchronous operation before your application is suspended, call // eventObject.setPromise(). }; The checkpoint event is raised when your Metro application goes into a suspended state. The idea is that you can save your application data when your application is suspended and reload your application data when your application resumes. Starting the Application The final statement in the default.js file is the statement that gets everything going: app.start(); Events are queued up in a JavaScript array named eventQueue . Until you call the start() method, the events in the queue are not processed. If you don’t call the start() method then the Loaded, Activated, Ready, and Unloaded events are never raised. Summary The goal of this blog entry was to describe the contents of the default.js file which is the JavaScript file which you use to kick off your custom code in a Windows Metro style application written with JavaScript. In this blog entry, I discussed the module pattern, JavaScript strict mode, handling first chance exceptions, WinJS Application events, and activation contexts.

Read the article
Ethernet Communication Error

- by SivaKumar

Hi, I wrote a program to query the status of the Ethernet printer for that i created a TCP Stream Socket and i send the query command to the printer.In case of Error less condition it returns No error status but in error case its getting hang at recv command.Even i used Non blocking now the recv command returns nothing and error set as Resource temporarily unavailable. code: #include <stdio.h> #include <sys/types.h> #include <sys/socket.h> #include <netinet/in.h> #include <netdb.h> #include <string.h> #include <unistd.h> #include <arpa/inet.h> #include <errno.h> #include <stdlib.h> #include <fcntl.h> #include <sys/ioctl.h> #include <sys/socket.h> #include <signal.h> #include <termios.h> #include <poll.h> #include <netinet/tcp.h> #include <stdarg.h> int main() { int ConnectSocket,ConnectSocket1,select_err,err,nRet,nBytesRead; struct timeval waitTime = {10,30}; fd_set socket_set; unsigned char * dataBuf = NULL; unsigned char tempVar, tempVar1, tempVar2, tempVar3; char reset[] = "\033E 2\r"; char print[] = "\033A 1\r"; char buf[1024]={0}; ConnectSocket = socket(AF_INET, SOCK_STREAM, IPPROTO_TCP); printf("The Socket ID is %d\n",ConnectSocket); if (ConnectSocket < 0) { perror("socket()"); return 0; } struct sockaddr_in clientService; clientService.sin_family = AF_INET; clientService.sin_addr.s_addr = inet_addr("192.168.0.129"); //Printer IP clientService.sin_port = htons( 9100); // Printer Port if ( connect( ConnectSocket, (struct sockaddr*) &clientService, sizeof(clientService) ) == -1) { perror("connect()"); close(ConnectSocket); return -1; } /* if((nRet = ioctl(ConnectSocket , FIONREAD, &nBytesRead) == -1)) { perror("ioctl()"); } perror("ioctl()"); */ FD_ZERO(&socket_set); FD_SET(ConnectSocket, &socket_set); do { errno=0; select_err = select(ConnectSocket+1, NULL, &socket_set, NULL, &waitTime); }while(errno==EINPROGRESS); if (-1 == select_err || 0 == select_err) { int optVal = 0; int optLen = sizeof(optVal); if(select_err == -1) { perror("select() write-side"); } else { //Timeout errno=0; err = getsockopt(ConnectSocket, SOL_SOCKET, SO_ERROR, (char*)&optVal, &optLen); printf("the return of the getsockopt is %d\n",err); printf("the opt val is %s\n",(char*)optVal); perror("getsockopt()"); if(err == -1) { perror("getsockopt() write-side"); } } printf("Select Failed during write - ConnectSocket: %d\n", ConnectSocket); //close(ConnectSocket); return -1; } err = send(ConnectSocket,print,sizeof(print)-1, 0); printf("\n No of Bytes Send is %d\n",err); if(err == -1 || err ==0) { perror("send()"); //close(ConnectSocket); return -1; } FD_ZERO(&socket_set); FD_SET(ConnectSocket, &socket_set); do { errno=0; select_err = select(ConnectSocket+1, NULL, &socket_set, NULL, &waitTime); }while(errno==EINPROGRESS); if (-1 == select_err || 0 == select_err) { printf("Select Failed during write - ConnectSocket: %d\n", ConnectSocket); return -1; } err = send(ConnectSocket,reset,sizeof(reset)-1, 0); printf("\n No of Bytes Send is %d\n",err); if(err == -1 || err ==0) { perror("send()"); //close(ConnectSocket); return -1; } FD_ZERO(&socket_set); FD_SET(ConnectSocket, &socket_set); printf("i am in reading \n"); select_err = select(ConnectSocket+1, &socket_set, NULL, NULL, &waitTime); printf("the retun of the read side select is %d \n",select_err); perror("select()"); if (-1 == select_err|| 0 == select_err) { printf("Read timeout; ConnectSocket: %d\n", ConnectSocket); close(ConnectSocket); perror("close()"); return -1; } printf("Before Recv\n"); nBytesRead = recv(ConnectSocket , buf, 1024, 0); printf("No of Bytes read is %d\n",nBytesRead); printf("%s\n",buf); if(nBytesRead == -1) { perror("recv()"); close(ConnectSocket); perror("clode()"); return -1; } close(ConnectSocket); return 1; }

Read the article
Scripting with the Sun ZFS Storage 7000 Appliance

- by Geoff Ongley

The Sun ZFS Storage 7000 appliance has a user friendly and easy to understand graphical web based interface we call the "BUI" or "Browser User Interface".This interface is very useful for many tasks, but in some cases a script (or workflow) may be more appropriate, such as:Repetitive tasksTasks which work on (or obtain information about) a large number of shares or usersTasks which are triggered by an alert threshold (workflows)Tasks where you want a only very basic input, but a consistent output (workflows)The appliance scripting language is based on ECMAscript 3 (close to javascript). I'm not going to cover ECMAscript 3 in great depth (I'm far from an expert here), but I would like to show you some neat things you can do with the appliance, to get you started based on what I have found from my own playing around.I'm making the assumption you have some sort of programming background, and understand variables, arrays, functions to some extent - but of course if something is not clear, please let me know so I can fix it up or clarify it.Variable Declarations and ArraysVariablesECMAScript is a dynamically and weakly typed language. If you don't know what that means, google is your friend - but at a high level it means we can just declare variables with no specific type and on the fly.For example, I can declare a variable and use it straight away in the middle of my code, for example:projects=list();Which makes projects an array of values that are returned from the list(); function (which is usable in most contexts). With this kind of variable, I can do things like:projects.length (this property on array tells you how many objects are in it, good for for loops etc). Alternatively, I could say:projects=3;and now projects is just a simple number.Should we declare variables like this so loosely? In my opinion, the answer is no - I feel it is a better practice to declare variables you are going to use, before you use them - and given them an initial value. You can do so as follows:var myVariable=0;To demonstrate the ability to just randomly assign and change the type of variables, you can create a simple script at the cli as follows (bold for input):fishy10:> script("." to run)> run("cd /");("." to run)> run ("shares");("." to run)> var projects;("." to run)> projects=list();("." to run)> printf("Number of projects is: %d\n",projects.length);("." to run)> projects=152;("." to run)> printf("Value of the projects variable as an integer is now: %d\n",projects);("." to run)> .Number of projects is: 7Value of the projects variable as an integer is now: 152You can also confirm this behaviour by checking the typeof variable we are dealing with:fishy10:> script("." to run)> run("cd /");("." to run)> run ("shares");("." to run)> var projects;("." to run)> projects=list();("." to run)> printf("var projects is of type %s\n",typeof(projects));("." to run)> projects=152;("." to run)> printf("var projects is of type %s\n",typeof(projects));("." to run)> .var projects is of type objectvar projects is of type numberArraysSo you likely noticed that we have already touched on arrays, as the list(); (in the shares context) stored an array into the 'projects' variable.But what if you want to declare your own array? Easy! This is very similar to Java and other languages, we just instantiate a brand new "Array" object using the keyword new:var myArray = new Array();will create an array called "myArray".A quick example:fishy10:> script("." to run)> testArray = new Array();("." to run)> testArray[0]="This";("." to run)> testArray[1]="is";("." to run)> testArray[2]="just";("." to run)> testArray[3]="a";("." to run)> testArray[4]="test";("." to run)> for (i=0; i < testArray.length; i++)("." to run)> {("." to run)> printf("Array element %d is %s\n",i,testArray[i]);("." to run)> }("." to run)> .Array element 0 is ThisArray element 1 is isArray element 2 is justArray element 3 is aArray element 4 is testWorking With LoopsFor LoopFor loops are very similar to those you will see in C, java and several other languages. One of the key differences here is, as you were made aware earlier, we can be a bit more sloppy with our variable declarations.The general way you would likely use a for loop is as follows:for (variable; test-case; modifier for variable){}For example, you may wish to declare a variable i as 0; and a MAX_ITERATIONS variable to determine how many times this loop should repeat:var i=0;var MAX_ITERATIONS=10;And then, use this variable to be tested against some case existing (has i reached MAX_ITERATIONS? - if not, increment i using i++);for (i=0; i < MAX_ITERATIONS; i++){ // some work to do}So lets run something like this on the appliance:fishy10:> script("." to run)> var i=0;("." to run)> var MAX_ITERATIONS=10;("." to run)> for (i=0; i < MAX_ITERATIONS; i++)("." to run)> {("." to run)> printf("The number is %d\n",i);("." to run)> }("." to run)> .The number is 0The number is 1The number is 2The number is 3The number is 4The number is 5The number is 6The number is 7The number is 8The number is 9While LoopWhile loops again are very similar to other languages, we loop "while" a condition is met. For example:fishy10:> script("." to run)> var isTen=false;("." to run)> var counter=0;("." to run)> while(isTen==false)("." to run)> {("." to run)> if (counter==10) ("." to run)> { ("." to run)> isTen=true; ("." to run)> } ("." to run)> printf("Counter is %d\n",counter);("." to run)> counter++; ("." to run)> }("." to run)> printf("Loop has ended and Counter is %d\n",counter);("." to run)> .Counter is 0Counter is 1Counter is 2Counter is 3Counter is 4Counter is 5Counter is 6Counter is 7Counter is 8Counter is 9Counter is 10Loop has ended and Counter is 11So what do we notice here? Something has actually gone wrong - counter will technically be 11 once the loop completes... Why is this?Well, if we have a loop like this, where the 'while' condition that will end the loop may be set based on some other condition(s) existing (such as the counter has reached 10) - we must ensure that we terminate this iteration of the loop when the condition is met - otherwise the rest of the code will be followed which may not be desirable. In other words, like in other languages, we will only ever check the loop condition once we are ready to perform the next iteration, so any other code after we set "isTen" to be true, will still be executed as we can see it was above.We can avoid this by adding a break into our loop once we know we have set the condition - this will stop the rest of the logic being processed in this iteration (and as such, counter will not be incremented). So lets try that again:fishy10:> script("." to run)> var isTen=false;("." to run)> var counter=0;("." to run)> while(isTen==false)("." to run)> {("." to run)> if (counter==10) ("." to run)> { ("." to run)> isTen=true; ("." to run)> break;("." to run)> } ("." to run)> printf("Counter is %d\n",counter);("." to run)> counter++; ("." to run)> }("." to run)> printf("Loop has ended and Counter is %d\n", counter);("." to run)> .Counter is 0Counter is 1Counter is 2Counter is 3Counter is 4Counter is 5Counter is 6Counter is 7Counter is 8Counter is 9Loop has ended and Counter is 10Much better!Methods to Obtain and Manipulate DataGet MethodThe get method allows you to get simple properties from an object, for example a quota from a user. The syntax is fairly simple:var myVariable=get('property');An example of where you may wish to use this, is when you are getting a bunch of information about a user (such as quota information when in a shares context):var users=list();for(k=0; k < users.length; k++){ user=users[k]; run('select ' + user); var username=get('name'); var usage=get('usage'); var quota=get('quota');...Which you can then use to your advantage - to print or manipulate infomation (you could change a user's information with a set method, based on the information returned from the get method). The set method is explained next.Set MethodThe set method can be used in a simple manner, similar to get. The syntax for set is:set('property','value'); // where value is a string, if it was a number, you don't need quotesFor example, we could set the quota on a share as follows (first observing the initial value):fishy10:shares default/test-geoff> script("." to run)> var currentQuota=get('quota');("." to run)> printf("Current Quota is: %s\n",currentQuota);("." to run)> set('quota','30G');("." to run)> run('commit');("." to run)> currentQuota=get('quota');("." to run)> printf("Current Quota is: %s\n",currentQuota);("." to run)> .Current Quota is: 0Current Quota is: 32212254720This shows us using both the get and set methods as can be used in scripts, of course when only setting an individual share, the above is overkill - it would be much easier to set it manually at the cli using 'set quota=3G' and then 'commit'.List MethodThe list method can be very powerful, especially in more complex scripts which iterate over large amounts of data and manipulate it if so desired. The general way you will use list is as follows:var myVar=list();Which will make "myVar" an array, containing all the objects in the relevant context (this could be a list of users, shares, projects, etc). You can then gather or manipulate data very easily.We could list all the shares and mountpoints in a given project for example:fishy10:shares another-project> script("." to run)> var shares=list();("." to run)> for (i=0; i < shares.length; i++)("." to run)> {("." to run)> run('select ' + shares[i]);("." to run)> var mountpoint=get('mountpoint');("." to run)> printf("Share %s discovered, has mountpoint %s\n",shares[i],mountpoint);("." to run)> run('done');("." to run)> }("." to run)> .Share and-another discovered, has mountpoint /export/another-project/and-anotherShare another-share discovered, has mountpoint /export/another-project/another-shareShare bob discovered, has mountpoint /export/another-projectShare more-shares-for-all discovered, has mountpoint /export/another-project/more-shares-for-allShare yep discovered, has mountpoint /export/another-project/yepWriting More Complex and Re-Usable CodeFunctionsThe best way to be able to write more complex code is to use functions to split up repeatable or reusable sections of your code. This also makes your more complex code easier to read and understand for other programmers.We write functions as follows:function functionName(variable1,variable2,...,variableN){}For example, we could have a function that takes a project name as input, and lists shares for that project (assuming we're already in the 'project' context - context is important!):function getShares(proj){ run('select ' + proj); shares=list(); printf("Project: %s\n", proj); for(j=0; j < shares.length; j++) { printf("Discovered share: %s\n",shares[i]); } run('done'); // exit selected project}Commenting your CodeLike any other language, a large part of making it readable and understandable is to comment it. You can use the same comment style as in C and Java amongst other languages.In other words, sngle line comments use://at the beginning of the comment.Multi line comments use:/*at the beginning, and:*/ at the end.For example, here we will use both:fishy10:> script("." to run)> // This is a test comment("." to run)> printf("doing some work...\n");("." to run)> /* This is a multi-line("." to run)> comment which I will span across("." to run)> three lines in total */("." to run)> printf("doing some more work...\n");("." to run)> .doing some work...doing some more work...Your comments do not have to be on their own, they can begin (particularly with single line comments this is handy) at the end of a statement, for examplevar projects=list(); // The variable projects is an array containing all projects on the system.Try and Catch StatementsYou may be used to using try and catch statements in other languages, and they can (and should) be utilised in your code to catch expected or unexpected error conditions, that you do NOT wish to stop your code from executing (if you do not catch these errors, your script will exit!):try{ // do some work}catch(err) // Catch any error that could occur{ // do something here under the error condition}For example, you may wish to only execute some code if a context can be reached. If you can't perform certain actions under certain circumstances, that may be perfectly acceptable.For example if you want to test a condition that only makes sense when looking at a SMB/NFS share, but does not make sense when you hit an iscsi or FC LUN, you don't want to stop all processing of other shares you may not have covered yet.For example we may wish to obtain quota information on all shares for all users on a share (but this makes no sense for a LUN):function getShareQuota(shar) // Get quota for each user of this share{ run('select ' + shar); printf(" SHARE: %s\n", shar); try { run('users'); printf(" %20s %11s %11s %3s\n","Username","Usage(G)","Quota(G)","Quota(%)"); printf(" %20s %11s %11s %4s\n","--------","--------","--------","----"); users=list(); for(k=0; k < users.length; k++) { user=users[k]; getUserQuota(user); } run('done'); // exit user context } catch(err) { printf(" SKIPPING %s - This is NOT a NFS or CIFs share, not looking for users\n", shar); } run('done'); // done with this share}Running Scripts Remotely over SSHAs you have likely noticed, writing and running scripts for all but the simplest jobs directly on the appliance is not going to be a lot of fun.There's a couple of choices on what you can do here:Create scripts on a remote system and run them over sshCreate scripts, wrapping them in workflow code, so they are stored on the appliance and can be triggered under certain circumstances (like a threshold being reached)We'll cover the first one here, and then cover workflows later on (as these are for the most part just scripts with some wrapper information around them).Creating a SSH Public/Private SSH Key PairLog on to your handy Solaris box (You wouldn't be using any other OS, right? :P) and use ssh-keygen to create a pair of ssh keys. I'm storing this separate to my normal key:[geoff@lightning ~] ssh-keygen -t rsa -b 1024Generating public/private rsa key pair.Enter file in which to save the key (/export/home/geoff/.ssh/id_rsa): /export/home/geoff/.ssh/nas_key_rsaEnter passphrase (empty for no passphrase): Enter same passphrase again: Your identification has been saved in /export/home/geoff/.ssh/nas_key_rsa.Your public key has been saved in /export/home/geoff/.ssh/nas_key_rsa.pub.The key fingerprint is:7f:3d:53:f0:2a:5e:8b:2d:94:2a:55:77:66:5c:9b:14 geoff@lightningInstalling the Public Key on the ApplianceOn your Solaris host, observe the public key:[geoff@lightning ~] cat .ssh/nas_key_rsa.pub ssh-rsa AAAAB3NzaC1yc2EAAAABIwAAAIEAvYfK3RIaAYmMHBOvyhKM41NaSmcgUMC3igPN5gUKJQvSnYmjuWG6CBr1CkF5UcDji7v19jG3qAD5lAMFn+L0CxgRr8TNaAU+hA4/tpAGkjm+dKYSyJgEdMIURweyyfUFXoerweR8AWW5xlovGKEWZTAfvJX9Zqvh8oMQ5UJLUUc= geoff@lightningNow, copy and paste everything after "ssh-rsa" and before "user@hostname" - in this case, geoff@lightning. That is, this bit:AAAAB3NzaC1yc2EAAAABIwAAAIEAvYfK3RIaAYmMHBOvyhKM41NaSmcgUMC3igPN5gUKJQvSnYmjuWG6CBr1CkF5UcDji7v19jG3qAD5lAMFn+L0CxgRr8TNaAU+hA4/tpAGkjm+dKYSyJgEdMIURweyyfUFXoerweR8AWW5xlovGKEWZTAfvJX9Zqvh8oMQ5UJLUUc=Logon to your appliance and get into the preferences -> keys area for this user (root):[geoff@lightning ~] ssh [email protected]: Last login: Mon Dec 6 17:13:28 2010 from 192.168.0.2fishy10:> configuration usersfishy10:configuration users> select rootfishy10:configuration users root> preferences fishy10:configuration users root preferences> keysOR do it all in one hit:fishy10:> configuration users select root preferences keysNow, we create a new public key that will be accepted for this user and set the type to RSA:fishy10:configuration users root preferences keys> createfishy10:configuration users root preferences key (uncommitted)> set type=RSASet the key itself using the string copied previously (between ssh-rsa and user@host), and set the key ensuring you put double quotes around it (eg. set key="<key>"):fishy10:configuration users root preferences key (uncommitted)> set key="AAAAB3NzaC1yc2EAAAABIwAAAIEAvYfK3RIaAYmMHBOvyhKM41NaSmcgUMC3igPN5gUKJQvSnYmjuWG6CBr1CkF5UcDji7v19jG3qAD5lAMFn+L0CxgRr8TNaAU+hA4/tpAGkjm+dKYSyJgEdMIURweyyfUFXoerweR8AWW5xlovGKEWZTAfvJX9Zqvh8oMQ5UJLUUc="Now set the comment for this key (do not use spaces):fishy10:configuration users root preferences key (uncommitted)> set comment="LightningRSAKey" Commit the new key:fishy10:configuration users root preferences key (uncommitted)> commitVerify the key is there:fishy10:configuration users root preferences keys> lsKeys:NAME MODIFIED TYPE COMMENT key-000 2010-10-25 20:56:42 RSA cycloneRSAKey key-001 2010-12-6 17:44:53 RSA LightningRSAKey As you can see, we now have my new key, and a previous key I have created on this appliance.Running your Script over SSH from a Remote SystemHere I have created a basic test script, and saved it as test.ecma3:[geoff@lightning ~] cat test.ecma3 script// This is a test script, By Geoff Ongley 2010.printf("Testing script remotely over ssh\n");.Now, we can run this script remotely with our keyless login:[geoff@lightning ~] ssh -i .ssh/nas_key_rsa root@fishy10 < test.ecma3Pseudo-terminal will not be allocated because stdin is not a terminal.Testing script remotely over sshPutting it Together - An Example Completed Quota Gathering ScriptSo now we have a lot of the basics to creating a script, let us do something useful, like, find out how much every user is using, on every share on the system (you will recognise some of the code from my previous examples): script/************************************** Quick and Dirty Quota Check script ** Written By Geoff Ongley ** 25 October 2010 **************************************/function getUserQuota(usr){ run('select ' + usr); var username=get('name'); var usage=get('usage'); var quota=get('quota'); var usage_g=usage / 1073741824; // convert bytes to gigabytes var quota_g=quota / 1073741824; // as above var quota_percent=0 if (quota > 0) { quota_percent=(usage / quota)*(100/1); } printf(" %20s %8.2f %8.2f %d%%\n",username,usage_g,quota_g,quota_percent); run('done'); // done with this selected user}function getShareQuota(shar){ //printf("DEBUG: selecting share %s\n", shar); run('select ' + shar); printf(" SHARE: %s\n", shar); try { run('users'); printf(" %20s %11s %11s %3s\n","Username","Usage(G)","Quota(G)","Quota(%)"); printf(" %20s %11s %11s %4s\n","--------","--------","--------","--------"); users=list(); for(k=0; k < users.length; k++) { user=users[k]; getUserQuota(user); } run('done'); // exit user context } catch(err) { printf(" SKIPPING %s - This is NOT a NFS or CIFs share, not looking for users\n", shar); } run('done'); // done with this share}function getShares(proj){ //printf("DEBUG: selecting project %s\n",proj); run('select ' + proj); shares=list(); printf("Project: %s\n", proj); for(j=0; j < shares.length; j++) { share=shares[j]; getShareQuota(share); } run('done'); // exit selected project}function getProjects(){ run('cd /'); run('shares'); projects=list(); for (i=0; i < projects.length; i++) { var project=projects[i]; getShares(project); } run('done'); // exit context for all projects}getProjects();.Which can be run as follows, and will print information like this:[geoff@lightning ~/FISHWORKS_SCRIPTS] ssh -i ~/.ssh/nas_key_rsa root@fishy10 < get_quota_utilisation.ecma3Pseudo-terminal will not be allocated because stdin is not a terminal.Project: another-project SHARE: and-another Username Usage(G) Quota(G) Quota(%) -------- -------- -------- -------- nobody 0.00 0.00 0% geoffro 0.05 0.00 0% Billy 0.10 0.00 0% root 0.00 0.00 0% testing-user 0.05 0.00 0% SHARE: another-share Username Usage(G) Quota(G) Quota(%) -------- -------- -------- -------- root 0.00 0.00 0% nobody 0.00 0.00 0% geoffro 0.05 0.49 9% testing-user 0.05 0.02 249% Billy 0.10 0.29 33% SHARE: bob Username Usage(G) Quota(G) Quota(%) -------- -------- -------- -------- nobody 0.00 0.00 0% root 0.00 0.00 0% SHARE: more-shares-for-all Username Usage(G) Quota(G) Quota(%) -------- -------- -------- -------- Billy 0.10 0.00 0% testing-user 0.05 0.00 0% nobody 0.00 0.00 0% root 0.00 0.00 0% geoffro 0.05 0.00 0% SHARE: yep Username Usage(G) Quota(G) Quota(%) -------- -------- -------- -------- root 0.00 0.00 0% nobody 0.00 0.00 0% Billy 0.10 0.01 999% testing-user 0.05 0.49 9% geoffro 0.05 0.00 0%Project: default SHARE: Test-LUN SKIPPING Test-LUN - This is NOT a NFS or CIFs share, not looking for users SHARE: test-geoff Username Usage(G) Quota(G) Quota(%) -------- -------- -------- -------- geoffro 0.05 0.00 0% root 3.18 10.00 31% uucp 0.00 0.00 0% nobody 0.59 0.49 119%^CKilled by signal 2.Creating a WorkflowWorkflows are scripts that we store on the appliance, and can have the script execute either on request (even from the BUI), or on an event such as a threshold being met.Workflow BasicsA workflow allows you to create a simple process that can be executed either via the BUI interface interactively, or by an alert being raised (for some threshold being reached, for example).The basics parameters you will have to set for your "workflow object" (notice you're creating a variable, that embodies ECMAScript) are as follows (parameters is optional):name: A name for this workflowdescription: A Description for the workflowparameters: A set of input parameters (useful when you need user input to execute the workflow)execute: The code, the script itself to execute, which will be function (parameters)With parameters, you can specify things like this (slightly modified sample taken from the System Administration Guide): ...parameters: variableParam1: { label: 'Name of Share', type: 'String' }, variableParam2 { label: 'Share Size', type: 'size' },execute: ....}; Note the commas separating the sections of name, parameters, execute, and so on. This is important!Also - there is plenty of properties you can set on the parameters for your workflow, these are described in the Sun ZFS Storage System Administration Guide.Creating a Basic Workflow from a Basic ScriptTo make a basic script into a basic workflow, you need to wrap the following around your script to create a 'workflow' object:var workflow = {name: 'Get User Quotas',description: 'Displays Quota Utilisation for each user on each share',execute: function() {// (basic script goes here, minus the "script" at the beginning, and "." at the end)}};However, it appears (at least in my experience to date) that the workflow object may only be happy with one function in the execute parameter - either that or I'm doing something wrong. As far as I can tell, after execute: you should only have a basic one function context like so:execute: function(){}To deal with this, and to give an example similar to our script earlier, I have created another simple quota check, to show the same basic functionality, but in a workflow format:var workflow = {name: 'Get User Quotas',description: 'Displays Quota Utilisation for each user on each share',execute: function () { run('cd /'); run('shares'); projects=list(); for (i=0; i < projects.length; i++) { run('select ' + projects[i]); shares=list('filesystem'); printf("Project: %s\n", projects[i]); for(j=0; j < shares.length; j++) { run('select ' +shares[j]); try { run('users'); printf(" SHARE: %s\n", shares[j]); printf(" %20s %11s %11s %3s\n","Username","Usage(G)","Quota(G)","Quota(%)"); printf(" %20s %11s %11s %4s\n","--------","--------","--------","-------"); users=list(); for(k=0; k < users.length; k++) { run('select ' + users[k]); username=get('name'); usage=get('usage'); quota=get('quota'); usage_g=usage / 1073741824; // convert bytes to gigabytes quota_g=quota / 1073741824; // as above quota_percent=0 if (quota > 0) { quota_percent=(usage / quota)*(100/1); } printf(" %20s %8.2f %8.2f %d%%\n",username,usage_g,quota_g,quota_percent); run('done'); } run('done'); // exit user context } catch(err) { // printf(" %s is a LUN, Not looking for users\n", shares[j]); } run('done'); // exit selected share context } run('done'); // exit project context } }};SummaryThe Sun ZFS Storage 7000 Appliance offers lots of different and interesting features to Sun/Oracle customers, including the world renowned Analytics. Hopefully the above will help you to think of new creative things you could be doing by taking advantage of one of the other neat features, the internal scripting engine!Some references are below to help you continue learning more, I'll update this post as I do the same! Enjoy...More information on ECMAScript 3A complete reference to ECMAScript 3 which will help you learn more of the details you may be interested in, can be found here:http://www.ecma-international.org/publications/files/ECMA-ST-ARCH/ECMA-262,%203rd%20edition,%20December%201999.pdfMore Information on Administering the Sun ZFS Storage 7000The Sun ZFS Storage 7000 System Administration guide can be a useful reference point, and can be found here:http://wikis.sun.com/download/attachments/186238602/2010_Q3_2_ADMIN.pdf

Read the article
Integrating NetBeans for Raspberry Pi Java Development

- by speakjava

Raspberry Pi IDE Java Development The Raspberry Pi is an incredible device for building embedded Java applications but, despite being able to run an IDE on the Pi it really pushes things to the limit. It's much better to use a PC or laptop to develop the code and then deploy and test on the Pi. What I thought I'd do in this blog entry was to run through the steps necessary to set up NetBeans on a PC for Java code development, with automatic deployment to the Raspberry Pi as part of the build process. I will assume that your starting point is a Raspberry Pi with an SD card that has one of the latest Raspbian images on it. This is good because this now includes the JDK 7 as part of the distro, so no need to download and install a separate JDK. I will also assume that you have installed the JDK and NetBeans on your PC. These can be downloaded here. There are numerous approaches you can take to this including mounting the file system from the Raspberry Pi remotely on your development machine. I tried this and I found that NetBeans got rather upset if the file system disappeared either through network interruption or the Raspberry Pi being turned off. The following method uses copying over SSH, which will fail more gracefully if the Pi is not responding. Step 1: Enable SSH on the Raspberry Pi To run the Java applications you create you will need to start Java on the Raspberry Pi with the appropriate class name, classpath and parameters. For non-JavaFX applications you can either do this from the Raspberry Pi desktop or, if you do not have a monitor connected through a remote command line. To execute the remote command line you need to enable SSH (a secure shell login over the network) and connect using an application like PuTTY. You can enable SSH when you first boot the Raspberry Pi, as the raspi-config program runs automatically. You can also run it at any time afterwards by running the command: sudo raspi-config This will bring up a menu of options. Select '8 Advanced Options' and on the next screen select 'A$ SSH'. Select 'Enable' and the task is complete. Step 2: Configure Raspberry Pi Networking By default, the Raspbian distribution configures the ethernet connection to use DHCP rather than a static IP address. You can continue to use DHCP if you want, but to avoid having to potentially change settings whenever you reboot the Pi using a static IP address is simpler. To configure this on the Pi you need to edit the /etc/network/interfaces file. You will need to do this as root using the sudo command, so something like sudo vi /etc/network/interfaces. In this file you will see this line: iface eth0 inet dhcp This needs to be changed to the following: iface eth0 inet static address 10.0.0.2 gateway 10.0.0.254 netmask 255.255.255.0 You will need to change the values in red to an appropriate IP address and to match the address of your gateway. Step 3: Create a Public-Private Key Pair On Your Development Machine How you do this will depend on which Operating system you are using: Mac OSX or Linux Run the command: ssh-keygen -t rsa Press ENTER/RETURN to accept the default destination for saving the key. We do not need a passphrase so simply press ENTER/RETURN for an empty one and once more to confirm. The key will be created in the file .ssh/id_rsa.pub in your home directory. Display the contents of this file using the cat command: cat ~/.ssh/id_rsa.pub Open a window, SSH to the Raspberry Pi and login. Change directory to .ssh and edit the authorized_keys file (don't worry if the file does not exist). Copy and paste the contents of the id_rsa.pub file to the authorized_keys file and save it. Windows Since Windows is not a UNIX derivative operating system it does not include the necessary key generating software by default. To generate the key I used puttygen.exe which is available from the same site that provides the PuTTY application, here. Download this and run it on your Windows machine. Follow the instructions to generate a key. I remove the key comment, but you can leave that if you want. Click "Save private key", confirm that you don't want to use a passphrase and select a filename and location for the key. Copy the public key from the part of the window marked, "Public key for pasting into OpenSSH authorized_keys file". Use PuTTY to connect to the Raspberry Pi and login. Change directory to .ssh and edit the authorized_keys file (don't worry if this does not exist). Paste the key information at the end of this file and save it. Logout and then start PuTTY again. This time we need to create a saved session using the private key. Type in the IP address of the Raspberry Pi in the "Hostname (or IP address)" field and expand "SSH" under the "Connection" category. Select "Auth" (see the screen shot below). Click the "Browse" button under "Private key file for authentication" and select the file you saved from puttygen. Go back to the "Session" category and enter a short name in the saved sessions field, as shown below. Click "Save" to save the session. Step 4: Test The Configuration You should now have the ability to use scp (Mac/Linux) or pscp.exe (Windows) to copy files from your development machine to the Raspberry Pi without needing to authenticate by typing in a password (so we can automate the process in NetBeans). It's a good idea to test this using something like: scp /tmp/foo [email protected]:/tmp on Linux or Mac or pscp.exe foo pi@raspi:/tmp on Windows (Note that we use the saved configuration name instead of the IP address or hostname so the public key is picked up). pscp.exe is another tool available from the creators of PuTTY. Step 5: Configure the NetBeans Build Script Start NetBeans and create a new project (or open an existing one that you want to deploy automatically to the Raspberry Pi). Select the Files tab in the explorer window and expand your project. You will see a build.xml file. Double click this to edit it. This file will mostly be comments. At the end (but within the </project> tag) add the XML for <target name="-post-jar">, shown below Here's the code again in case you want to use cut-and-paste: <target name="-post-jar"> <echo level="info" message="Copying dist directory to remote Pi"/> <exec executable="scp" dir="${basedir}"> <arg line="-r"/> <arg value="dist"/> <arg value="[email protected]:NetBeans/CopyTest"/> </exec> </target> For Windows it will be slightly different: <target name="-post-jar"> <echo level="info" message="Copying dist directory to remote Pi"/> <exec executable="C:\pi\putty\pscp.exe" dir="${basedir}"> <arg line="-r"/> <arg value="dist"/> <arg value="pi@raspi:NetBeans/CopyTest"/> </exec> </target> You will also need to ensure that pscp.exe is in your PATH (or specify a fully qualified pathname). From now on when you clean and build the project the dist directory will automatically be copied to the Raspberry Pi ready for testing.

Read the article
t-sql string concatenation

- by stackoverflowuser

i have a table that has following column Type -------- type 1 type 2 type 3 How can i convert the above to a string like ('type 1', 'type 2', 'type 3') I want to use the output in my t-sql query with IN clause. Something like select * from TableA where SomeColumn IN ('Type 1','Type 2', Type 3') I used to following to come up with output (type 1, type 2, type 3) select '(' + STUFF((select ', ' + Type from TableA for xml path ('')),1,2,'') + ')' But dont know how to insert the single quotes.

Read the article
How to group a complex list of objects using LINQ?

- by Daoming Yang

I want to select and group the products, and rank them by the number of times they occur. For example, I have an OrderList each of order object has a OrderProductVariantList(OrderLineList), and each of OrderProductVariant object has ProductVariant, and then the ProductVariant object will have a Product object which contains product information. A friend helped me with the following code. It could be compiled, but it did not return any value/result. I used the watch window for the query and it gave me "The name 'query' does not exist in the current context". Can anyone help me? Many thanks. var query = orderList.SelectMany( o => o.OrderLineList ) // results in IEnumerable<OrderProductVariant> .Select( opv => opv.ProductVariant ) .Select( pv => p.Product ) .GroupBy( p => p ) .Select( g => new { Product = g.Key, Count = g.Count() });

Read the article
Customize Your WordPress Blog & Build an Audience

- by Matthew Guay

Want to quickly give your blog a fresh coat of paint and make it stand out from the pack? Here’s how you can customize your WordPress blog and make it uniquely yours. WordPress offers many features that help you make your blog the best it can be. Although it doesn’t offer as many customization features as full WordPress running on your own server, it still makes it easy to make your free blog as professional or cute as you like. Here we’ll look at how you can customize features in your blog and build an audience. Personalize Your Blog WordPress make it easy to personalize your blog. Most of the personalization options are available under the Appearance menu on the left. Here we’ll look at how you can use most of these. Add New Theme WordPress is popular for the wide range of themes available for it. While you cannot upload your own theme to your blog, you can choose from over 90 free themes currently available with more added all the time. To change your theme, select the Themes page under Appearance. The Themes page will show random themes, but you can choose to view them in alphabetical order, by popularity, or how recently they were added. Or, you can search for a theme by name or features. One neat way to find a theme that suites your needs is the Feature Filter. Click the link on the right of the search button, and then select the options you want to make sure your theme has. Click Apply Filters and WordPress will streamline your choices to themes that contain these features. Once you find a theme you like, click Preview under its name to see how your blog will look. This will open a popup that shows your blog with the new theme. Click the Activate link in the top right corner of the popup if you want to keep this theme; otherwise, click the x in the top left corner to close the preview and continue your search for one you want. Edit Current Theme Many of the themes on WordPress have customization options so you can make your blog stand out from others using the same theme. The default theme Twenty Ten lets you customize both the header and background image, and many themes have similar options. To choose a new header image, select the Header page under Appearance. Select one of the pre-installed images and click Save Changes, or upload your own image. If you upload an image larger than the size for the header, WordPress will let you crop it directly in the web interface. Click Crop Header when you’ve selected the portion you want for the header of your blog. You can also customize your blog’s background from the Background page under Appearance. You can upload an image for the background, or can enter a hex value of a color for a solid background. If you’d rather visually choose a color, click Select a Color to open a color wheel that makes it easy to choose a nice color. Click Save Changes when you’re done. Note: that all themes may not contain these customization options, but many are flexible. You cannot edit the actual CSS of your theme on free WordPress blogs, but you you can purchase the Custom CSS Upgrade for $14.97/year to add this ability. Add Widgets With Extra Content Widgets are small addons for your blog, similar to Desktop Gadgets in Windows 7 or Dashboard widgets in Mac OS X. You can add widgets to your blog to show recent Tweets, favorite Flickr pictures, popular articles, and more. To add widgets to your blog, open the Widgets page under Appearance. You’ll see a variety of widgets available in the main white box. Select one you want to add, and drag it to the widget area of your choice. Different themes may offer different areas to place Widgets, such as the sidebar or footer. Most of the widgets offer configuration options. Click the down arrow beside its name to edit it. Set them up as you wish, and click Save on the bottom of the widget. Now we’ve got some nice dynamic content on our blog that’s automatically updated from the net. Choose Blog Extras By default, WordPress shows previews of websites when visitors hover over links on your blog, uses a special mobile theme when people visit from a mobile device, and shows related links to other blogs on the WordPress network at the end of your posts. If you don’t like these features, you can disable them on the Extras page under Appearance. Build Your Audience Now that your blog is looking nice, we can make sure others will discover it. WordPress makes it easy for you to make your site discoverable on search engines or social network, and even gives you the option to keep your site private if you’d prefer. Open the Privacy page under Tools to change your site’s visibility. By default, it will be indexed by search engines and be viewable to everyone. You can also choose to leave your blog public but block search engines, or you can make it fully private. If you choose to make your blog private, you can enter up to 35 usernames of people you want to be able to see it. Each private visitor must have a WordPress.com account so they can login. If you need more than 35 private members, you can upgrade to allow unlimited private members for $29.97/year. Then, if you do want your site visible from search engines, one of the best ways to make sure your content is discovered by search engines is to register with their webmaster tools. Once registered, you need to add your key to your site so the search engine will find and index it. On the bottom of the Tools page, WordPress lets you enter your key from Google, Bing, and Yahoo! to make sure your site is discovered. If you haven’t signed up with these tools yet, you can signup via the links on this page as well. Post Blog Updates to Social Networks Many people discover the sites they visit from friends and others via social networks. WordPress makes it easy to automatically share links to your content on popular social networks. To activate this feature, open the My Blogs page under Dashboard. Now, select the services you want to activate under the Publicize section. This will automatically update Yahoo!, Twitter, and/or Facebook every time you publish a new post. You’ll have to authorize your connection with the social network. With Twitter and Yahoo!, you can authorize them with only two clicks, but integrating with Facebook will take several steps. If you’d rather share links yourself on social networks, you can get shortened URLs to your posts. When you write a new post or edit an existing one, click the Get Shortlink button located underneath the post’s title. This will give you a small URL, usually 20 characters or less, that you can use to post on social networks such as Twitter. This should help build your traffic, and if you want to see how many people are checking out your site, check out the stats on your Dashboard. This shows a graph of how many people are visiting, and popular posts. Click View All if you’d like more detailed stats including search engine terms that lead people to your blog. Conclusion Whether you’re looking to make a private blog for your group or publish a blog that’s read by millions around the world, WordPress is a great way to do it for free. And with all of the personalization options, you can make your it memorable and exciting for your visitors. If you don’t have a blog, you can always signup for a free one from WordPress.com. Also make sure to check out our article on how to Start Your Own Blog with WordPress. Similar Articles Productive Geek Tips Manage Your WordPress Blog Comments from Your Windows DesktopAdd Social Bookmarking (Digg This!) Links to your Wordpress BlogHow-To Geek SoftwareMake a Backup Copy of your Production Wordpress Blog on UbuntuOops! Sorry About the Feed Errors TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips CloudBerry Online Backup 1.5 for Windows Home Server Snagit 10 VMware Workstation 7 Acronis Online Backup Windows Firewall with Advanced Security – How To Guides Sculptris 1.0, 3D Drawing app AceStock, a Tiny Desktop Quote Monitor Gmail Button Addon (Firefox) Hyperwords addon (Firefox) Backup Outlook 2010

Read the article
Cross join (pivot) with n-n table containing values

- by Styx31

I have 3 tables : TABLE MyColumn ( ColumnId INT NOT NULL, Label VARCHAR(80) NOT NULL, PRIMARY KEY (ColumnId) ) TABLE MyPeriod ( PeriodId CHAR(6) NOT NULL, -- format yyyyMM Label VARCHAR(80) NOT NULL, PRIMARY KEY (PeriodId) ) TABLE MyValue ( ColumnId INT NOT NULL, PeriodId CHAR(6) NOT NULL, Amount DECIMAL(8, 4) NOT NULL, PRIMARY KEY (ColumnId, PeriodId), FOREIGN KEY (ColumnId) REFERENCES MyColumn(ColumnId), FOREIGN KEY (PeriodId) REFERENCES MyPeriod(PeriodId) ) MyValue's rows are only created when a real value is provided. I want my results in a tabular way, as : Column | Month 1 | Month 2 | Month 4 | Month 5 | Potatoes | 25.00 | 5.00 | 1.60 | NULL | Apples | 2.00 | 1.50 | NULL | NULL | I have successfully created a cross-join : SELECT MyColumn.Label AS [Column], MyPeriod.Label AS [Period], ISNULL(MyValue.Amount, 0) AS [Value] FROM MyColumn CROSS JOIN MyPeriod LEFT OUTER JOIN MyValue ON (MyValue.ColumnId = MyColumn.ColumnId AND MyValue.PeriodId = MyPeriod.PeriodId) Or, in linq : from p in MyPeriods from c in MyColumns join v in MyValues on new { c.ColumnId, p.PeriodId } equals new { v.ColumnId, v.PeriodId } into values from nv in values.DefaultIfEmpty() select new { Column = c.Label, Period = p.Label, Value = nv.Amount } And seen how to create a pivot in linq (here or here) : (assuming MyDatas is a view with the result of the previous query) : from c in MyDatas group c by c.Column into line select new { Column = line.Key, Month1 = line.Where(l => l.Period == "Month 1").Sum(l => l.Value), Month2 = line.Where(l => l.Period == "Month 2").Sum(l => l.Value), Month3 = line.Where(l => l.Period == "Month 3").Sum(l => l.Value), Month4 = line.Where(l => l.Period == "Month 4").Sum(l => l.Value) } But I want to find a way to create a resultset with, if possible, Month1, ... properties dynamic. Note : A solution which results in a n+1 query : from c in MyDatas group c by c.Column into line select new { Column = line.Key, Months = from l in line group l by l.Period into period select new { Period = period.Key, Amount = period.Sum(l => l.Value) } }

Read the article
Connecting a DomainContext and loading data manually in Silverlight 4 RC application

- by Redburn

I am new to WCF & RIA services and have what seems like a basic problem. I have multiple times in my silverlight 4 RC application dragged and dropped from my datasource window to my form and have returned information from the database. However I have a need to query the database for other information (Building a report) When I try to use the following code, I recieve no error, but I also do not get any information back from the service. //Global public UMSDomainContext _umsDomainContext = new UMSDomainContext(); //In the Initialization portion _umsDomainContext.Load(_umsDomainContext.GetUMOptionsQuery()); //Queries var name = from n in _umsDomainContext.UMOptions select n.DistrictName; var street1 = from c in _umsDomainContext.UMOptions select c.Address1; var street2 = from c in _umsDomainContext.UMOptions select c.Address2; var city = from c in _umsDomainContext.UMOptions select c.City; var zip = from c in _umsDomainContext.UMOptions select c.Zip; Im calling the current additional assem. using System.Linq; using System.ServiceModel.DomainServices.Client; using System.ComponentModel.DataAnnotations; using MTT.Web;

Read the article
C# and NpgsqlDataAdapter returning a single string instead of a data table

- by tme321

I have a postgresql db and a C# application to access it. I'm having a strange error with values I return from a NpgsqlDataAdapter.Fill command into a DataSet. I've got this code: NpgsqlCommand n = new NpgsqlCommand(); n.Connection = connector; // a class member NpgsqlConnection DataSet ds = new DataSet(); DataTable dt = new DataTable(); // DBTablesRef are just constants declared for // the db table names and columns ArrayList cols = new ArrayList(); cols.Add(DBTablesRef.all); //all is just * ArrayList idCol = new ArrayList(); idCol.Add(DBTablesRef.revIssID); ArrayList idVal = new ArrayList(); idVal.Add(idNum); // a function parameter // Select builder and Where builder are just small // functions that return an sql statement based // on the parameters. n is passed to the where // builder because the builder uses named // parameters and sets them in the NpgsqlCommand // passed in String select = SelectBuilder(DBTablesRef.revTableName, cols) + WhereBuilder(n,idCol, idVal); n.CommandText = select; try { NpgsqlDataAdapter da = new NpgsqlDataAdapter(n); ds.Reset(); // filling DataSet with result from NpgsqlDataAdapter da.Fill(ds); // C# DataSet takes multiple tables, but only the first is used here dt = ds.Tables[0]; } catch (Exception e) { Console.WriteLine(e.ToString()); } So my problem is this: the above code works perfectly, just like I want it to. However, if instead of doing a select on all (*) if I try to name individual columns to return from the query I get the information I asked for, but rather than being split up into seperate entries in the data table I get a string in the first index of the data table that looked something like: "(0,5,false,Bob Smith,7)" And the data is correct, I would be expecting 0, then 5, then a boolean, then some text etc. But I would (obviously) prefer it to not be returned as just one big string. Anyone know why if I do a select on * I get a datatable as expected, but if I do a select on specific columns I get a data table with one entry that is the string of the values I'm asking for?

Read the article
Umbraco XSLT issue

- by Brad

I'm trying to use the Umbraco GetMedia function to write an image URL to the screen, I receive an error parsing the XSLT file. <xsl:for-each select="$currentPage/descendant::node [string(data [@alias='tickerItemActive']) = '1']"> <xsl:value-of select="data [@alias='tickerText']"/><br /> <xsl:value-of select="umbraco.library:GetMedia(data [@alias='tickerImage'], 0)/data [@alias = 'umbracoFile']"/> </xsl:for-each> The tickerImage field contains the MediaID for which I'd like to display the URL. I can return the field outside the GetMedia function and it works fine. I can also replace the data [@alias='tickerImage] with '1117' (or any valid media ID) the XSLT passes verification and the script runs. THIS WORKS: <xsl:value-of select="umbraco.library:GetMedia('1117', 0)/data [@alias = 'umbracoFile']"/> THIS DOES NOT: <xsl:value-of select="umbraco.library:GetMedia(data [@alias='tickerImage'], 0)/data [@alias = 'umbracoFile']"/> Any help that can be offered would is appreciated. Thanks!

Read the article
Failed to compile Network Manager 0.9.4

- by Oleksa

After upgrading to 12.04 I needed to re-compile Network Manager to the version 0.9.4.0 again. However with the version 9.4.0 I faced with the error during compilation with libdns-manager: $ make ... Making all in dns-manager make[4]: ????? ? ??????? "/home/stasevych/install/network-manager/nm0.9.4.0/network-manager-0.9.4.0/src/dns-manager" /bin/bash ../../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I../.. -I../../src/logging -I../../libnm-util -I../../libnm-util -I../../src -I../../include -I../../include -I/usr/include/libnl3 -I/usr/include/libnl3 -I/usr/include/libnl3 -I/usr/include/dbus-1.0 -I/usr/lib/x86_64-linux-gnu/dbus-1.0/include -I/usr/include/glib-2.0 -I/usr/lib/x86_64-linux-gnu/glib-2.0/include -pthread -I/usr/include/glib-2.0 -I/usr/lib/x86_64-linux-gnu/glib-2.0/include -DLOCALSTATEDIR=\"/usr/local/var\" -Wall -std=gnu89 -g -O2 -Wshadow -Wmissing-declarations -Wmissing-prototypes -Wdeclaration-after-statement -Wfloat-equal -Wno-unused-parameter -Wno-sign-compare -fno-strict-aliasing -Wno-unused-but-set-variable -Wundef -Werror -MT libdns_manager_la-nm-dns-manager.lo -MD -MP -MF .deps/libdns_manager_la-nm-dns-manager.Tpo -c -o libdns_manager_la-nm-dns-manager.lo `test -f 'nm-dns-manager.c' || echo './'`nm-dns-manager.c libtool: compile: gcc -DHAVE_CONFIG_H -I. -I../.. -I../../src/logging -I../../libnm-util -I../../libnm-util -I../../src -I../../include -I../../include -I/usr/include/libnl3 -I/usr/include/libnl3 -I/usr/include/libnl3 -I/usr/include/dbus-1.0 -I/usr/lib/x86_64-linux-gnu/dbus-1.0/include -I/usr/include/glib-2.0 -I/usr/lib/x86_64-linux-gnu/glib-2.0/include -pthread -I/usr/include/glib-2.0 -I/usr/lib/x86_64-linux-gnu/glib-2.0/include -DLOCALSTATEDIR=\"/usr/local/var\" -Wall -std=gnu89 -g -O2 -Wshadow -Wmissing-declarations -Wmissing-prototypes -Wdeclaration-after-statement -Wfloat-equal -Wno-unused-parameter -Wno-sign-compare -fno-strict-aliasing -Wno-unused-but-set-variable -Wundef -Werror -MT libdns_manager_la-nm-dns-manager.lo -MD -MP -MF .deps/libdns_manager_la-nm-dns-manager.Tpo -c nm-dns-manager.c -fPIC -DPIC -o .libs/libdns_manager_la-nm-dns-manager.o mv -f .deps/libdns_manager_la-nm-dns-manager.Tpo .deps/libdns_manager_la-nm-dns-manager.Plo /bin/bash ../../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I../.. -I../../src/logging -I../../libnm-util -I../../libnm-util -I../../src -I../../include -I../../include -I/usr/include/libnl3 -I/usr/include/libnl3 -I/usr/include/libnl3 -I/usr/include/dbus-1.0 -I/usr/lib/x86_64-linux-gnu/dbus-1.0/include -I/usr/include/glib-2.0 -I/usr/lib/x86_64-linux-gnu/glib-2.0/include -pthread -I/usr/include/glib-2.0 -I/usr/lib/x86_64-linux-gnu/glib-2.0/include -DLOCALSTATEDIR=\"/usr/local/var\" -Wall -std=gnu89 -g -O2 -Wshadow -Wmissing-declarations -Wmissing-prototypes -Wdeclaration-after-statement -Wfloat-equal -Wno-unused-parameter -Wno-sign-compare -fno-strict-aliasing -Wno-unused-but-set-variable -Wundef -Werror -MT libdns_manager_la-nm-dns-dnsmasq.lo -MD -MP -MF .deps/libdns_manager_la-nm-dns-dnsmasq.Tpo -c -o libdns_manager_la-nm-dns-dnsmasq.lo `test -f 'nm-dns-dnsmasq.c' || echo './'`nm-dns-dnsmasq.c libtool: compile: gcc -DHAVE_CONFIG_H -I. -I../.. -I../../src/logging -I../../libnm-util -I../../libnm-util -I../../src -I../../include -I../../include -I/usr/include/libnl3 -I/usr/include/libnl3 -I/usr/include/libnl3 -I/usr/include/dbus-1.0 -I/usr/lib/x86_64-linux-gnu/dbus-1.0/include -I/usr/include/glib-2.0 -I/usr/lib/x86_64-linux-gnu/glib-2.0/include -pthread -I/usr/include/glib-2.0 -I/usr/lib/x86_64-linux-gnu/glib-2.0/include -DLOCALSTATEDIR=\"/usr/local/var\" -Wall -std=gnu89 -g -O2 -Wshadow -Wmissing-declarations -Wmissing-prototypes -Wdeclaration-after-statement -Wfloat-equal -Wno-unused-parameter -Wno-sign-compare -fno-strict-aliasing -Wno-unused-but-set-variable -Wundef -Werror -MT libdns_manager_la-nm-dns-dnsmasq.lo -MD -MP -MF .deps/libdns_manager_la-nm-dns-dnsmasq.Tpo -c nm-dns-dnsmasq.c -fPIC -DPIC -o .libs/libdns_manager_la-nm-dns-dnsmasq.o nm-dns-dnsmasq.c: In function 'update': nm-dns-dnsmasq.c:274:2: error: passing argument 1 of 'g_slist_copy' discards 'const' qualifier from pointer target type [-Werror] /usr/include/glib-2.0/glib/gslist.h:82:10: note: expected 'struct GSList *' but argument is of type 'const struct GSList *' cc1: all warnings being treated as errors make[4]: *** [libdns_manager_la-nm-dns-dnsmasq.lo] ??????? 1 make[4]: ??????? ??????? "/home/stasevych/install/network-manager/nm0.9.4.0/network-manager-0.9.4.0/src/dns-manager" make[3]: *** [all-recursive] ??????? 1 make[3]: ??????? ??????? "/home/stasevych/install/network-manager/nm0.9.4.0/network-manager-0.9.4.0/src" make[2]: *** [all] ??????? 2 make[2]: ??????? ??????? "/home/stasevych/install/network-manager/nm0.9.4.0/network-manager-0.9.4.0/src" make[1]: *** [all-recursive] ??????? 1 make[1]: ??????? ??????? "/home/stasevych/install/network-manager/nm0.9.4.0/network-manager-0.9.4.0" make: *** [all] ??????? 2 Has anybody faced with the similar errors? Thank you in advance for your help.

Read the article
LINQ-to-SQL IN/Contains() for Nullable<T>

- by Craig Walker

I want to generate this SQL statement in LINQ: select * from Foo where Value in ( 1, 2, 3 ) The tricky bit seems to be that Value is a column that allows nulls. The equivalent LINQ code would seem to be: IEnumerable<Foo> foos = MyDataContext.Foos; IEnumerable<int> values = GetMyValues(); var myFoos = from foo in foos where values.Contains(foo.Value) select foo; This, of course, doesn't compile, since foo.Value is an int? and values is typed to int. I've tried this: IEnumerable<Foo> foos = MyDataContext.Foos; IEnumerable<int> values = GetMyValues(); IEnumerable<int?> nullables = values.Select( value => new Nullable<int>(value)); var myFoos = from foo in foos where nullables.Contains(foo.Value) select foo; ...and this: IEnumerable<Foo> foos = MyDataContext.Foos; IEnumerable<int> values = GetMyValues(); var myFoos = from foo in foos where values.Contains(foo.Value.Value) select foo; Both of these versions give me the results I expect, but they do not generate the SQL I want. It appears that they're generating full-table results and then doing the Contains() filtering in-memory (ie: in plain LINQ, without -to-SQL); there's no IN clause in the DataContext log. Is there a way to generate a SQL IN for Nullable types?

Read the article
Join map and refer to its key/value in HQL

- by alamar

Suppose I have a map: <map name="externalIds" table="album_external_ids"> <key column="album_id" not-null="true"/> <map-key-many-to-many class="Major" column="major_id"/> <element column="external_id" type="string" not-null="true"/> </map> How do I make a HQL meaning "select entities where map key's id == :foo and map value == :bar"? I can join it using select album from Album album join album.externalIds ids But how would I then refer to ids' key and value? ids.key.id = :foo and ids.value = :bar doesn't work, and hibernate doc is silent on this topic. Naive approaches that didn't work: select album from Album album join album.externalIds externalId where index(externalId).id = :foo and externalId = :bar and select album from Album album join album.externalIds externalId join index(externalId) major where major.id = :foo and externalId = :bar

Read the article
Jquery change function don’t work properly

- by user1493448

I have same id, name two html select. If I change first html select then it’s work properly but If I change second html select then it’s not work. Please can someone point out what I may be doing wrong here? Many thanks. Here is my code: <html> <head> <title>the title</title> <script type="text/javascript" src="https://ajax.googleapis.com/ajax/libs/jquery/1.7.1/jquery.min.js"></script> <script type="text/javascript" language="javascript"> $(document).ready(function() { $("#name").change(function(){ $.post( "data.php", $("#testform").serialize(), function(data) { $('#stage1').html(data); } ); var str = $("#testform").serialize(); $("#stage2").text(str); }); }); </script> </head> <body> <div id="stage1" style="background-color:blue; color: white"> STAGE - 1 </div> <form id="testform"> <table> <tr> <td><p>Fruit:</p></td> <td> <select id="name" name="name[]"> <option>Apple</option> <option>Mango</option> <option>Orange</option> <option>Banana</option> </select> </td> </tr> <tr> <td><p>Fruit:</p></td> <td> <select id="name" name="name[]"> <option>Apple</option> <option>Mango</option> <option>Orange</option> <option>Banana</option> </select> </td> </tr> </table> </form> </body> </html> Php code: <?php $fruit=$_REQUEST["name"]; $n = count($fruit); for($i=0;$i<$n; $i++) { echo $fruit[$i]."<br/>"; } ?>

Read the article
Problem with recursivity in rebol

- by Rebol Tutorial

I have a block on which I want to iterate recursively folders: [ Chrome [ content [ preferences prefpages ] ] icons [ default ] locale [ en-EN [ csbar ] ] skin ] with this function: iterate-folder: func [folders [block!]][ foreach folder folders [ either not block? folder [ probe folder temp: folder input ] [ print "folder" probe folder print "folders" probe folders probe select folders folder type-folder: type? select folders folder probe type-folder input iterate-folder select folders folder ] ] ] but for stupid reason I can't see, probe folder returns none above so it doesn't work.

Read the article
Grails multiple databases

- by srinath

Hi, how can we write queries on 2 databases . I installed datasources plugin and domain classes are : class Organization { long id long company_id String name static mapping = { version false table 'organization_' id column : 'organizationId' company_id column : 'companyId' name column : 'name' } } class Assoc { Integer id Integer association_id Integer organization_id static mapping = { version false table 'assoc' id column : 'ASSOC_ID' association_id column : 'ASSOCIATION_ID' organization_id column : 'ORGANIZATION_ID' } } this is working : def org = Organization.list() def assoc = Assoc.list() and this is not working : def query = Organization.executeQuery("SELECT o.name as name, o.id FROM Organization o WHERE o.id IN (SELECT a.organization_id FROM Assoc a )") error : org.hibernate.hql.ast.QuerySyntaxException: Assoc is not mapped [SELECT o.name as name, o.id FROM org.com.domain.Organization o WHERE o.id IN (SELECT a.organization_id FROM AssocOrg a )] How can we connect with 2 databases using single query ? thanks in advance .

Read the article
Add comma-separated value of grouped rows to existing query

- by Peter Lang

I've got a view for reports, that looks something like this: SELECT a.id, a.value1, a.value2, b.value1, /* (+50 more such columns)*/ FROM a JOIN b ON (b.id = a.b_id) JOIN c ON (c.id = b.c_id) LEFT JOIN d ON (d.id = b.d_id) LEFT JOIN e ON (e.id = d.e_id) /* (+10 more inner/left joins) */ It joins quite a few tables and returns lots of columns, but indexes are in place and performance is fine. Now I want to add another column to the result, showing comma-separated values ordered by value from table y outer joined via intersection table x if a.value3 IS NULL, else take a.value3 To comma-separate the grouped values I use Tom Kyte's stragg, could use COLLECT later. Pseudo-code for the SELECT would look like that: SELECT xx.id, COALESCE( a.value3, stragg( xx.val ) ) value3 FROM ( SELECT x.id, y.val FROM x WHERE x.a_id = a.id JOIN y ON ( y.id = x.y_id ) ORDER BY y.val ASC ) xx GROUP BY xx.id What is the best way to do it? Any tips?

Read the article
How to eager load sibling data using LINQ to SQL?

- by Scott

The goal is to issue the fewest queries to SQL Server using LINQ to SQL without using anonymous types. The return type for the method will need to be IList<Child1>. The relationships are as follows: Parent Child1 Child2 Grandchild1 Parent Child1 is a one-to-many relationship Child1 Grandchild1 is a one-to-n relationship (where n is zero to infinity) Parent Child2 is a one-to-n relationship (where n is zero to infinity) I am able to eager load the Parent, Child1 and Grandchild1 data resulting in one query to SQL Server. This query with load options eager loads all of the data, except the sibling data (Child2): DataLoadOptions loadOptions = new DataLoadOptions(); loadOptions.LoadWith<Child1>(o => o.GrandChild1List); loadOptions.LoadWith<Child1>(o => o.Parent); dataContext.LoadOptions = loadOptions; IQueryable<Child1> children = from child in dataContext.Child1 select child; I need to load the sibling data as well. One approach I have tried is splitting the query into two LINQ to SQL queries and merging the result sets together (not pretty), however upon accessing the sibling data it is lazy loaded anyway. Adding the sibling load option will issue a query to SQL Server for each Grandchild1 and Child2 record (which is exactly what I am trying to avoid): DataLoadOptions loadOptions = new DataLoadOptions(); loadOptions.LoadWith<Child1>(o => o.GrandChild1List); loadOptions.LoadWith<Child1>(o => o.Parent); loadOptions.LoadWith<Parent>(o => o.Child2List); dataContext.LoadOptions = loadOptions; IQueryable<Child1> children = from child in dataContext.Child1 select child; exec sp_executesql N'SELECT * FROM [dbo].[Child2] AS [t0] WHERE [t0].[ForeignKeyToParent] = @p0',N'@p0 int',@p0=1 exec sp_executesql N'SELECT * FROM [dbo].[Child2] AS [t0] WHERE [t0].[ForeignKeyToParent] = @p0',N'@p0 int',@p0=2 exec sp_executesql N'SELECT * FROM [dbo].[Child2] AS [t0] WHERE [t0].[ForeignKeyToParent] = @p0',N'@p0 int',@p0=3 exec sp_executesql N'SELECT * FROM [dbo].[Child2] AS [t0] WHERE [t0].[ForeignKeyToParent] = @p0',N'@p0 int',@p0=4 I've also written LINQ to SQL queries to join in all of the data in hopes that it would eager load the data, however when the LINQ to SQL EntitySet of Child2 or Grandchild1 are accessed it lazy loads the data. The reason for returning the IList<Child1> is to hydrate business objects. My thoughts are I am either: Approaching this problem the wrong way. Have the option of calling a stored procedure? My organization should not be using LINQ to SQL as an ORM? Any help is greatly appreciated. Thank you, -Scott

Read the article
Error when calling Mysql Stored procedure

- by devuser

This is my stored procedure to search throgh all databases,tables and columns. This procedure got created with out any error. DELIMITER $$ DROP PROCEDURE IF EXISTS mydb.get_table$$ CREATE DEFINER=root@% PROCEDURE get_table(in_search varchar(50)) READS SQL DATA BEGIN DECLARE trunc_cmd VARCHAR(50); DECLARE search_string VARCHAR(250); DECLARE db,tbl,clmn CHAR(50); DECLARE done INT DEFAULT 0; DECLARE COUNTER INT; DECLARE table_cur CURSOR FOR SELECT concat('SELECT COUNT(*) INTO @CNT_VALUE FROM ', table_schema,'.', table_name, ' WHERE ', column_name,' REGEXP ''',in_search,'''' ) ,table_schema,table_name,column_name FROM information_schema.COLUMNS WHERE TABLE_SCHEMA NOT IN ('mydb','information_schema'); DECLARE CONTINUE HANDLER FOR NOT FOUND SET done=1; #Truncating table for refill the data for new search. PREPARE trunc_cmd FROM 'TRUNCATE TABLE temp_details'; EXECUTE trunc_cmd ; OPEN table_cur; table_loop:LOOP FETCH table_cur INTO search_string,db,tbl,clmn; #Executing the search SET @search_string = search_string; SELECT search_string; PREPARE search_string FROM @search_string; EXECUTE search_string; SET COUNTER = @CNT_VALUE; SELECT COUNTER; IF COUNTER0 THEN # Inserting required results from search to table INSERT INTO temp_details VALUES(db,tbl,clmn); END IF; IF done=1 THEN LEAVE table_loop; END IF; END LOOP; CLOSE table_cur; #Finally Show Results SELECT * FROM temp_details; END$$ DELIMITER ; But when calling this procedure following error occurs. call get_table('aaa') Error Code : 1064 You have an error in your SQL syntax; check the manual that corresponds to your MySQL server version for the right syntax to use near 'delete REGEXP 'aaa'' at line 1 (0 ms taken)

Read the article
Linq to SQL and SQL Server Compact Error: "There was an error parsing the query."

- by Jeremy

I created a SQL server compact database (MyDatabase.sdf), and populated it with some data. I then ran SQLMetal.exe and generated a linq to sql class (MyDatabase.mdf) Now I'm trying to select all records from a table with a relatively straightforward select, and I get the error: "There was an error parsing the query. [ Token line number = 3,Token line offset = 67,Token in error = MAX]" Here is my select code: public IEnumerable ListItems() { MyDatabase db_m = new MyDatabase("c:\mydatabase.sdf"); return this.db_m.TestTable.Select(test = new Item() { .... } } I've read that Linq to SQL works with Sql Compact, is there some other configuration I need to do?

Read the article
Inner Join with more than a field

- by Leandro

Precise to do a select with inner join that has relationship in more than a field among the tables Exemple: DataSet dt = new Select().From(SubConta.Schema) .InnerJoin(PlanoContabilSubConta.EmpSubContaColumn, SubConta.CodEmpColumn) .InnerJoin(PlanoContabilSubConta.FilSubContaColumn, SubConta.CodFilColumn) .InnerJoin(PlanoContabilSubConta.SubContaColumn, SubConta.TradutorColumn) .Where(PlanoContabilSubConta.Columns.EmpContabil).IsEqualTo(cEmp) .And(PlanoContabilSubConta.Columns.FilContabil).IsEqualTo(cFil) .And(PlanoContabilSubConta.Columns.Conta).IsEqualTo(cTrad) .ExecuteDataSet(); But the generated sql is wrong: exec sp_executesql N'/* GetDataSet() */ SELECT [dbo].[SubContas].[CodEmp], [dbo].[SubContas].[CodFil], [dbo].[SubContas].[Tradutor], [dbo].[SubContas].[Descricao], [dbo].[SubContas].[Inativa], [dbo].[SubContas].[DataImplantacao] FROM [dbo].[SubContas] INNER JOIN [dbo].[PlanoContabilSubContas] ON [dbo].[SubContas].[CodEmp] = [dbo].[PlanoContabilSubContas].[EmpSubConta] INNER JOIN [dbo].[PlanoContabilSubContas] ON [dbo].[SubContas].[CodFil] = [dbo].[PlanoContabilSubContas].[FilSubConta] INNER JOIN [dbo].[PlanoContabilSubContas] ON [dbo].[SubContas].[Tradutor] = [dbo].[PlanoContabilSubContas].[SubConta] WHERE EmpContabil = @EmpContabil0 AND FilContabil = @FilContabil1 AND Conta = @Conta2 ',N'@EmpContabil0 varchar(1),@FilContabil1 varchar(1),@Conta2 varchar(1)',@EmpContabil0='1',@FilContabil1='1',@Conta2='1' What should be made to generate this sql? exec sp_executesql N'/* GetDataSet() */ SELECT [dbo].[SubContas].[CodEmp], [dbo].[SubContas].[CodFil], [dbo].[SubContas].[Tradutor], [dbo].[SubContas].[Descricao], [dbo].[SubContas].[Inativa], [dbo].[SubContas].[DataImplantacao] FROM [dbo].[SubContas] INNER JOIN [dbo].[PlanoContabilSubContas] ON [dbo].[SubContas].[CodEmp] = [dbo].[PlanoContabilSubContas].[EmpSubConta] AND [dbo].[SubContas].[CodFil] = [dbo].[PlanoContabilSubContas].[FilSubConta] AND [dbo].[SubContas].[Tradutor] = [dbo].[PlanoContabilSubContas].[SubConta] WHERE EmpContabil = @EmpContabil0 AND FilContabil = @FilContabil1 AND Conta = @Conta2 ',N'@EmpContabil0 varchar(1),@FilContabil1 varchar(1),@Conta2 varchar(1)',@EmpContabil0='1',@FilContabil1='1',@Conta2='1'

Read the article
How to fill DataGridView from nested table oracle

- by arkadiusz85

I want to create my type: CREATE TYPE t_read AS OBJECT ( id_worker NUMBER(20), how_much NUMBER(5,2), adddate_r DATE, date_from DATE, date_to DATE ); I create a table of my type: CREATE TYPE t_tab_read AS TABLE OF t_read; Next step is create a table with my type: enter code hereCREATE TABLE Reading ( id_watermeter NUMBER(20) constraint Watermeter_fk1 references Watermeters(id_watermeter), read t_tab_read ) NESTED TABLE read STORE AS store_read ; Microsoft Visual Studio can not display this type in DataGridView. I use Oracle.Command: C# using Oracle.DataAccess; using Oracle.DataAccess.Client; private void button1_Click(object sender, EventArgs e) { try { //my working class to connect to database ConnectionClass.BeginConnection(); OracleDataAdapter tmp = new OracleDataAdapter(); tmp = ConnectionClass.ReadCommand(ReadClass.test()); DataSet dataset4 = new DataSet(); tmp.Fill(dataset4, "Read1"); dataGridView4.DataSource = dataset4.Tables["Read1"]; } catch (Exception o) { MessageBox.Show(o.Message); } public class ReadClass { public static OracleCommand test() { string sql = "select c.id_watermeter, a. from reading c , table (c.read) a where id_watermeter=1"; ConnectionClass.Command1= new OracleCommand(sql, ConnectionClass.Connection); ConnectionClass.Command1.CommandType = CommandType.Text; return ConnectionClass.Command1; } } I tray: string sql = "select r.id_watermeter, o.id_worker, o.how_much, o.adddate_r, o.date_from, o.date_to from reading r, table (r.read) o where r.id_watermeter=1" string sql = "select a.from reading c , Table (c.read) a where id_watermeter=1" string sql = "select a.id_worker, a.how_much, a.adddate_r, a.date_from, a.date_to from reading c , table (c.read) a where id_watermeter=1" string sql = "select c.id_watermeter, a. from reading c , table (c.read) a where id_watermeter=1" Error : Unsuported Oracle data type USERDEFINED encountered Sombady can help me how to fill DataGridView using data from nested table. I am using Oracle 10g XE

Read the article
C# LINQ to SQL Except Operator

- by kb

Hi i have a list of event Ids that i want to be excluded from my select statement, but no sure how to implement this: this is what stores my list of event Ids List<int> ExcludedEvents; and this is my select statement (from an XML feed) var allEvents = from eventsList in xmlDoc.Elements("shows").Elements("Show") select new EventFeed() { EventName = eventsList.Attribute("Name").Value, EventSummary = eventsList.Attribute("ShortDesc").Value, EventDetails = eventsList.Attribute("LongDesc").Value, EventShowCode = eventsList.Attribute("Code").Value }; i want to select all events except for the events that have their eventId matching the EventShowCode value i have looked at the except operator, but not sure how to implement it thanks

Read the article

< Previous Page | 203 204 205 206 207 208 209 210 211 212 213 214 | Next Page >