Search Results

Search found 13437 results on 538 pages for 'trusted root certificates'.

Page 207/538 | < Previous Page | 203 204 205 206 207 208 209 210 211 212 213 214  | Next Page >

  • Using ext4 in VMware machine

    First of all, using a journaling filesystems like NTFS, ext4, XFS, or JFS (not to name all of them) is a very good idea and nowadays unthinkable not to do. Linux offers a good variety of different option as journaling filesystem for your system. Since years I am using SGI's XFS and I am pretty confident with stability, performance and liability of the system. In earlier years I had to struggle with incompatibilities between XFS and the boot loader. Using an ext2 formatted /boot solved this issue. But, wow, that is ages ago! Lately, I had to setup a fresh Lucid Lynx (Ubuntu 10.04 LTS) system for a change of our internal groupware / messaging system. Therefore, I fired up a new virtual machine with almost standard configuration in VMware Server and run through our network-based PXE boot and installation procedure. At a certain step in this process, Ubuntu asks you about the partitioning of your hard drive(s). Honestly, I have to say that only out of curiousity I sticked to the "default" suggestion and gave my faith and trust into the Ubuntu installation routine... Resulting to have an ext4 based root mount point ( / ). The rest of the installation went on without further concerns or worries. Note:I really can't remember why I chose to go away from my favourite... Well, it should turn out to be the wrong decision after all. Ok, let's continue the story about ext4 in a VMware based virtual machine. After some hours installing additional packages and configuring the new system using LDAP for general authentication and login, I had an "out-of-the-box" usable enterprise messaging system based on Zarafa 6.40 Community Edition inclusive proper SSL-based Webaccess interface and Z-Push extension for ActiveSync with my Nokia mobile. Straightforward and pretty nice for the time spent on the setup. Having priority on other tasks I let the system just running and didn't pay any further attention at all. Until I run into an upgrade of "Mail for Exchange" on Symbian OS. My mobile did not bother me at all with the upgrade and everything went smooth, but trying to re-establish the ActiveSync connection to the Zarafa messaging system resulted in a frustating situation. So, I shifted my focus back to the Linux system and I was amazed to figure out that the root had been remounted readonly due to hard drive failures or at least ext4 reported errors. Firing up Google only confirmed my concerns and it seems that using ext4 for VMware based virtual machines does not look like a stable and reliable candidate to me. You might consider reading those external resources: ext4 fs corruption under VMWare Server 2.01Bug #389555 - ext4 filesystem corruption Well, I learned my lesson and ext{2|3|4} based filesystems are not going to be used on any of my Linux systems or customer installations in the future. Addendum: I did not try this setup in other virtualization environments like VirtualBox, qemu, kvm, Xen, etc.

    Read the article

  • Undertanding .bashrc and .bash_profile

    - by Blankman
    On a server when I login as root I see .bashrc (ubuntu 10.10). On my Mac I have a .bash_profile, does ubuntu always have only a .bashrc file and not .bash_profile? (just confused so asking, I realize they are different o/s's but maybe there is a relationship somehow?) On my server, I want to create an alias, should I put it in .bashrc? What if I want this alias to be applied so all users can use it?

    Read the article

  • Nvidia driver cannot be installed with jockey for old hardware

    - by Alen
    I have a GeForce FX/5-series card and I cannot install the driver using the Additional Drivers (jokey) tool. I just installed Ubuntu 12.04 and installed all nvidia drivers, but my drivers are not activated, when I open Nvidia settings manager I get the following message: You do not appear to be using the NVIDIA X driver. Please edit your X configuration file (just run nvidia-xconfig as root), and restart the X server. Can you help me with this?

    Read the article

  • Need ProFTPd to follow symbolic link

    - by FMaz008
    I have 2 folder: /var/www/project1/ /var/www/repository/module/ and I have this symbolic link: /var/www/project1/module/News = /var/www/repository/module/News I know the target is outside the ftp root folder. But I want to make proFTPd to be able to display&follow that symbolic link. The security is NOT a matter, we use that FTP on the local network for development purpose only. Ps.: I also use GADMIN-PROFTPD, and I installed everything by default, using apt-get install.

    Read the article

  • Securing WebSocket applications on Glassfish

    - by Pavel Bucek
    Today we are going to cover deploying secured WebSocket applications on Glassfish and access to these services using WebSocket Client API. WebSocket server application setup Our server endpoint might look as simple as this: @ServerEndpoint("/echo") public class EchoEndpoint { @OnMessage   public String echo(String message) {     return message + " (from your server)";   } } Everything else must be configured on container level. We can start with enabling SSL, which will require web.xml to be added to your project. For starters, it might look as following: <web-app version="3.0" xmlns="http://java.sun.com/xml/ns/javaee">   <security-constraint>     <web-resource-collection>       <web-resource-name>Protected resource</web-resource-name>       <url-pattern>/*</url-pattern>       <http-method>GET</http-method>     </web-resource-collection>     <!-- https -->     <user-data-constraint>       <transport-guarantee>CONFIDENTIAL</transport-guarantee>     </user-data-constraint>   </security-constraint> </web-app> This is minimal web.xml for this task - web-resource-collection just defines URL pattern and HTTP method(s) we want to put a constraint on and user-data-constraint defines that constraint, which is in our case transport-guarantee. More information about these properties and security settings for web application can be found in Oracle Java EE 7 Tutorial. I have some simple webpage attached as well, so I can test my endpoint right away. You can find it (along with complete project) in Tyrus workspace: [webpage] [whole project]. After deploying this application to Glassfish Application Server, you should be able to hit it using your favorite browser. URL where my application resides is https://localhost:8181/sample-echo-https/ (may be different, depends on other configuration). My browser warns me about untrusted certificate (I use what freshly built Glassfish provides - self signed certificates) and after adding an exception for this site, I can see my webpage and I am able to securely connect to wss://localhost:8181/sample-echo-https/echo. WebSocket client Already mentioned demo application also contains test client, but execution of this is skipped for normal build. Reason for this is that Glassfish uses these self-signed "random" untrusted certificates and you are (in most cases) not able to connect to these services without any additional settings. Creating test WebSocket client is actually quite similar to server side, only difference is that you have to somewhere create client container and invoke connect with some additional info. Java API for WebSocket allows you to use annotated and programmatic way to construct endpoints. Server side shows the annotated case, so let's see how the programmatic approach will look. final WebSocketContainer client = ContainerProvider.getWebSocketContainer(); client.connectToServer(new Endpoint() {   @Override   public void onOpen(Session session, EndpointConfig EndpointConfig) {     try {       // register message handler - will just print out the       // received message on standard output.       session.addMessageHandler(new MessageHandler.Whole<String>() {       @Override         public void onMessage(String message) {          System.out.println("### Received: " + message);         }       });       // send a message       session.getBasicRemote().sendText("Do or do not, there is no try.");     } catch (IOException e) {       // do nothing     }   } }, ClientEndpointConfig.Builder.create().build(),    URI.create("wss://localhost:8181/sample-echo-https/echo")); This client should work with some secured endpoint with valid certificated signed by some trusted certificate authority (you can try that with wss://echo.websocket.org). Accessing our Glassfish instance will require some additional settings. You can tell Java which certificated you trust by adding -Djavax.net.ssl.trustStore property (and few others in case you are using linked sample). Complete command line when you are testing your service might need to look somewhat like: mvn clean test -Djavax.net.ssl.trustStore=$AS_MAIN/domains/domain1/config/cacerts.jks\ -Djavax.net.ssl.trustStorePassword=changeit -Dtyrus.test.host=localhost\ -DskipTests=false Where AS_MAIN points to your Glassfish instance. Note: you might need to setup keyStore and trustStore per client instead of per JVM; there is a way how to do it, but it is Tyrus proprietary feature: http://tyrus.java.net/documentation/1.2.1/user-guide.html#d0e1128. And that's it! Now nobody is able to "hear" what you are sending to or receiving from your WebSocket endpoint. There is always room for improvement, so the next step you might want to take is introduce some authentication mechanism (like HTTP Basic or Digest). This topic is more about container configuration so I'm not going to go into details, but there is one thing worth mentioning: to access services which require authorization, you might need to put this additional information to HTTP headers of first (Upgrade) request (there is not (yet) any direct support even for these fundamental mechanisms, user need to register Configurator and add headers in beforeRequest method invocation). I filed related feature request as TYRUS-228; feel free to comment/vote if you need this functionality.

    Read the article

  • H1 Visa interview tips–What you must know before attending the interview?

    - by Gopinath
    USA’s H1 visa allows highly qualified professionals from other countries to work in America. Many IT professionals in India aspire to go to USA on H1 and work for their clients. Recently I had a chance to study H1 visa process to help one of my friends and I would like to share what I learned. With the assumption that your H1 petition is approved and you got an interview scheduled at US Embassy for your visa stamping, here are tips you must know before attending the interview Dress Code – Formals Say no to casuals or any fancy dress when you attend the interview. It’s not a party or friends home you are visiting. Consider H1 Visa interview as your job interview and dress up in formals. There is no option B for your, you must be in formals. A plain formal shirt with a matching pant is suggested for men. Tie and Suit would not be required, but if you are a professional at management level you can consider wearing suit. Women can wear either formal Salwar or formal pant-shirt. Avoid heavy jewellery, wear what is must as per your tradition or culture. Body Language -  Smile on your face Your body language reflects what you are and what’s going on in your mind. Don’t be nervous or restless, be relaxed and wear a beautiful smile on your face. A smile is a curve that sets everything straight. When you are called for the interview, greet the interviewer with a beautiful smile. Say Good Morning/Afternoon/Evening depending on time you are visiting them. Whenever appropriate say Thank You. Generally American professionals are very friendly people and they reciprocate for your greetings. Make sure that you make them comfortable to start the interview. Carry original documents in a separate folder I don’t want to talk much about the documents that are required for your H1B interview as it’s big subject on it’s own and it requires a separate post. I assume that your consultant or employer helped you in gathering all the required documents like – petition, DS 160 forms, education & job related documents, resume, interview call letters, client letters, etc. For all the documents you are going to submit at the interview make sure that you have originals in a separate folder.  If required interviewer may ask you show the originals of any of the document you submitted for visa processing. Don’t mix the original documents with the documents you need to submit for interview. Have a separate folder for them. For those who are going to stamping along with their spouse and children, they need to carry few extra original documents like – marriage certificate, marriage photos(30 numbers)/album, birth certificates, passports, education and profession related certificates of the spouse and children. Know your role & responsibilities The interviewer will ask you questions on your roles and responsibilities at client location. Be clear what is your day to day tasks at client place and prepared to face detailed questions on the same. When asked explain clearly and also make sure what you say is inline with what is mentioned in your petition and client invitation letter. At times they may ask you questions specific to the project/technology you are going to work. So doing some homework in this area will help you easily answer the questions. Failing to answer basic questions on your role & responsibilities may result in rejection. You work for your Employer at Client location but NOT FOR CLIENT One of the important things to keep in mind that you work for your employer and you are being deputed to client location on a work visa.  Your employer is going to be solely responsible for your salary, work, promotion, pay hikes or what so ever during your stay at USA. Your client will not be responsible for anything. Lets say you are employed with Company X in India and they are applying for H1B to work at your client(ex: Microsoft) in USA, you must keep in my mind that Microsoft is not your employer. Microsoft will not pay your salaries or responsible for any employment related activities. Company X will be solely responsible for all your employer related activities. If you don’t get this correctly and say to Visa interviewer that your client is responsible, then you may get into troubles. Know your client It’s always good to know the clients with whom you are going to work in USA and their business. If your client is a well know organisation then you may not get many questions from interviewer else you need to be well prepared to provide details like – nature of business, location, size of the organisation, etc.  Get to know the basic details about your client and be confident while providing those details to the interviewer. Also make sure that you never talk about any confidential details of your client projects and business. Revealing confidential details of your client may land your job itself in soup. Make sure that your spouse is also in sync with you If you’ve applied a H4 visa for your spouse along with your H1, make sure that spouse is in sync with you. Your spouse also should know the basic details of your job, your employer, client and location where you will be travelling. Your spouse should also be prepared to answers questions related to marriage, their profession(if working), kids, education, etc. Interviewers will try to asses your spouse communication skills, whereabouts while staying in USA and would they prefer to work USA or not. On H4, which is a dependent visa, your spouse is not allowed to work in USA and at any point your spouse should not show the intentions to search for work in USA. Less luggage more comfort You would have definitely heard that there are lot of restrictions on what you can carry along with you to an US Embassy while attending the interview. To be frank it’s not good to say there are many restrictions, but there are a hell a lot of restrictions. There are unbelievable restrictions and it’s for the safety of everyone. You are not allowed to carry mobile phones, CD/DVDs, USBs, bank cards, cameras, cosmetics, food(except baby food), water, wallets, backpacks, sealed covers, etc. Trust me most of the things we carry with us regularly every day are not allowed inside. As there are 100s of restrictions, it would be easier if you understand what you can carry along with you and just carry them alone. Ask your employer/consultant to provide you a checklist of items that you can carry. Most what you would require are H1B related documents provided by the employer/consultant Photographs All original documents supporting your H1B Passports Some cash for your travel expenses (avoid coins) Any important phone number / details written in a paper(like your cab driver number, etc.) If you carry restricted stuff then you will be stopped at security checks, you have to find people who can safely keep all the restricted items. Due to heavy restrictions in and around the US Embassy you will not find any  place to keep your luggage. So just carry the bare minimum things required so that you feel more comfortable. Useful Links THE U.S. NON IMMIGRANT VISA APPLICATION PROCESS U.S VISA SECURITY REGULATIONS GENERAL FAQS Hope this information is helpful to you and best of luck for your interview. Creative commons Image credit: Flickr/ alexfrance, vinothchandar. hughelectronic, architratan, striatic

    Read the article

  • Apache2 Syntex, cant acces 000-default

    - by enrique2334
    I have been using Apache2 and webmin with my raspberry pi. after a restart and reinstalations apache wont start. > sudo /etc/init.d/apache2 restart apache2: Syntax error on line 268 of /etc/apache2/apache2.conf: Could not open configuration file /etc/apache2/sites-enabled/000-default: No such file or directory Action 'configtest' failed. The Apache error log may have more information. failed! The file 000-default is there and unopenable permisions to root-root My apache2.conf file looks like this (bottom half) # ErrorLog: The location of the error log file. # If you do not specify an ErrorLog directive within a <VirtualHost> # container, error messages relating to that virtual host will be # logged here. If you *do* define an error logfile for a <VirtualHost> # container, that host's errors will be logged there and not here. # ErrorLog ${APACHE_LOG_DIR}/error.log # # LogLevel: Control the number of messages logged to the error_log. # Possible values include: debug, info, notice, warn, error, crit, # alert, emerg. # LogLevel debug # Include module configuration: Include mods-enabled/*.load Include mods-enabled/*.conf # Include list of ports to listen on and which to use for name based vhosts Include ports.conf # # The following directives define some format nicknames for use with # a CustomLog directive (see below). # If you are behind a reverse proxy, you might want to change %h into %{X-Forwarded-For}i # LogFormat "%v:%p %h %l %u %t \"%r\" %>s %O \"%{Referer}i\" \"%{User-Agent}i\"" vhost_combined LogFormat "%h %l %u %t \"%r\" %>s %O \"%{Referer}i\" \"%{User-Agent}i\"" combined LogFormat "%h %l %u %t \"%r\" %>s %O" common LogFormat "%{Referer}i -> %U" referer LogFormat "%{User-agent}i" agent # Include of directories ignores editors' and dpkg's backup files, # see the comments above for details. # Include generic snippets of statements Include conf.d/ # Include the virtual host configurations: Include sites-enabled/ <VirtualHost *:80> DocumentRoot /var/www <Directory /var/www> allow from all Options +Indexes </Directory> ServerName IMASERVER </VirtualHost> does anyone know what the cause of this?

    Read the article

  • asus n550jv audio problem: no sound from notebook' speakers

    - by skywalker
    Ubuntu 13.10. The problem is: the internal speakers don't work. I have no problem when I'm using the headphones. There is no hardware issue since in windows 8 everything works perfectly(external subwoofer included). I'm trying to modify /etc/modprobe.d/alsa-base.conf but I can't find the correct model to put into: options snd-hda-intel model= The file HD-Audio-Models.txt doesn't contain the model for ALC668. Some info: :~sudo aplay -l **** List of PLAYBACK Hardware Devices **** card 0: MID [HDA Intel MID], device 3: HDMI 0 [HDMI 0] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: MID [HDA Intel MID], device 7: HDMI 1 [HDMI 1] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: MID [HDA Intel MID], device 8: HDMI 2 [HDMI 2] Subdevices: 1/1 Subdevice #0: subdevice #0 card 1: PCH [HDA Intel PCH], device 0: ALC668 Analog [ALC668 Analog] Subdevices: 0/1 Subdevice #0: subdevice #0 :~$ sudo lspci -v | grep -A7 -i "audio" 00:03.0 Audio device: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor HD Audio Controller (rev 06) Subsystem: Intel Corporation Device 2010 Flags: bus master, fast devsel, latency 0, IRQ 52 Memory at f7a14000 (64-bit, non-prefetchable) [size=16K] Capabilities: [50] Power Management version 2 Capabilities: [60] MSI: Enable+ Count=1/1 Maskable- 64bit- Capabilities: [70] Express Root Complex Integrated Endpoint, MSI 00 Kernel driver in use: snd_hda_intel -- 00:1b.0 Audio device: Intel Corporation 8 Series/C220 Series Chipset High Definition Audio Controller (rev 04) Subsystem: ASUSTeK Computer Inc. Device 11cd Flags: bus master, fast devsel, latency 0, IRQ 53 Memory at f7a10000 (64-bit, non-prefetchable) [size=16K] Capabilities: [50] Power Management version 2 Capabilities: [60] MSI: Enable+ Count=1/1 Maskable- 64bit+ Capabilities: [70] Express Root Complex Integrated Endpoint, MSI 00 Capabilities: [100] Virtual Channel PS info :~$ amixer -c 0 Simple mixer control 'IEC958',0 Capabilities: pswitch pswitch-joined Playback channels: Mono Mono: Playback [on] Simple mixer control 'IEC958',1 Capabilities: pswitch pswitch-joined Playback channels: Mono Mono: Playback [on] Simple mixer control 'IEC958',2 Capabilities: pswitch pswitch-joined Playback channels: Mono Mono: Playback [on] :~$ pacmd dump-volumes Welcome to PulseAudio! Use "help" for usage information. Sink 0: reference = 0: 76% 1: 76%, real = 0: 76% 1: 76%, soft = 0: 100% 1: 100%, current_hw = 0: 76% 1: 76%, save = yes Input 8: volume = 0: 100% 1: 100%, reference_ratio = 0: 100% 1: 100%, real_ratio = 0: 100% 1: 100%, soft = 0: 100% 1: 100%, volume_factor = 0: 100% 1: 100%, volume_factor_sink = 0: 100% 1: 100%, save = no Source 0: reference = 0: 100% 1: 100%, real = 0: 100% 1: 100%, soft = 0: 100% 1: 100%, current_hw = 0: 100% 1: 100%, save = no Source 1: reference = 0: 16% 1: 16%, real = 0: 16% 1: 16%, soft = 0: 100% 1: 100%, current_hw = 0: 16% 1: 16%, save = yes

    Read the article

  • NFS server generating "invalid extent" on EXT4 system disk?

    - by Stephen Winnall
    I have a server running Xen 4.1 with Oneiric in the dom0 and each of the 4 domUs. The system disks of the domUs are LVM2 volumes built on top of an mdadm RAID1. All the domU system disks are EXT4 and are created using snapshots of the same original template. 3 of them run perfectly, but one (called s-ub-02) keeps on being remounted read-only. A subsequent e2fsck results in a single "invalid extent" diagnosis: e2fsck 1.41.14 (22-Dec-2010) /dev/domu/s-ub-02-root contains a file system with errors, check forced. Pass 1: Checking inodes, blocks, and sizes Inode 525418 has an invalid extent (logical block 8959, invalid physical block 0, len 0) Clear<y>? yes Pass 2: Checking directory structure Pass 3: Checking directory connectivity Pass 4: Checking reference counts Pass 5: Checking group summary information /dev/domu/s-ub-02-root: 77757/655360 files (0.3% non-contiguous), 360592/2621440 blocks The console shows typically the following errors for the system disk (xvda2): [101980.903416] EXT4-fs error (device xvda2): ext4_ext_find_extent:732: inode #525418: comm apt-get: bad header/extent: invalid extent entries - magic f30a, entries 12, max 340(340), depth 0(0) [101980.903473] EXT4-fs (xvda2): Remounting filesystem read-only I have created new versions of the system disk. The same thing always happens. This, and the fact that the disk is ultimately on a RAID1, leads me to preclude a hardware disk error. The only obvious distinguishing feature of this domU is the presence of nfs-kernel-server, so I suspect that. Its exports file looks like this: /exports/users 192.168.0.0/255.255.248.0(rw,sync,no_subtree_check) /exports/media/music 192.168.0.0/255.255.248.0(rw,sync,no_subtree_check) /exports/media/pictures 192.168.0.0/255.255.248.0(rw,sync,no_subtree_check) /exports/opt 192.168.0.0/255.255.248.0(rw,sync,no_subtree_check) /exports/users and /exports/opt are LVM2 volumes from the same volume group as the system disk. /exports/media is an EXT2 volume. (There is an issue where clients see /exports/media/pictures as being a read-only volume, which I mention for completeness.) With the exception of the read-only problem, the NFS server appears to work correctly under light load for several hours before the "invalid extent" problem occurs. There are no helpful entries in /var/log. All of a sudden, no more files are written, so you can see when the disk was remounted read-only, but there is no indication of what the cause might be. Can anyone help me with this problem? Steve

    Read the article

  • Android Market : Google supprime 21 applications populaires infectées de malwares et lance leur désinstallation à distance

    Android Market : Google supprime 21 applications populaires infectées Par des malwares et lance leur désinstallation à distance Google vient de bannir de l'Android Market pas moins de 21 applications populaires, en raison de nombreux Malwares et Trojans qu'elles contiennent. Ces applications appartiennent au même développeur (Myournet) et intègrent toutes l'exploit nommé « rage-against-the-cage », qui permet au code malicieux d'obtenir le droit d'administrateur principal (root) sur les versions d'Android antérieures à la 2.2.2. Ce droit acquis, les applications étaient en mesure de télécharger et d'exécuter du code via des portes dérobées, ouvrant ainsi la voie à de...

    Read the article

  • Where do I create the file .htaccess, in order to serve my HTML5 cache manifest file correctly?

    - by Forrest
    From a post on http://diveintohtml5.org/offline.html (Wayback Machine Copy) Your cache manifest file can be located anywhere on your web server, but it must be served with the content type text/cache-manifest. If you are running an Apache-based web server, you can probably just put an AddType directive in the .htaccess file at the root of your web directory: AddType text/cache-manifest .manifest Where do I create the file .htaccess? Need some more setup with apachectl ? Thanks very much !

    Read the article

  • Why is iOS "jailbreaking" CPU specific? [closed]

    - by Ted Wong
    Recently, iOS 6 was "jailbroken" but only on the Apple A4 CPU. Why is the "jailbreaking" process specific to a CPU? From Wikipedia: ... "iOS jailbreaking is the process of removing the limitations imposed by Apple on devices running the iOS operating system through the use of hardware/software exploits – such devices include the iPhone, iPod touch, iPad, and second generation Apple TV. Jailbreaking allows iOS users to gain root access to the operating system""" ...

    Read the article

  • What is the default file system of /var/run, /var/lock

    - by Casey
    Trying to figure out if my /var/run is using disk or not. See the command output: $ df -h Filesystem Size Used Avail Use% Mounted on /dev/mapper/vg0-root 40G 15G 26G 36% / none 3.9G 340K 3.9G 1% /dev none 3.9G 1.1M 3.9G 1% /dev/shm tmpfs 3.9G 600K 3.9G 1% /tmp none 3.9G 452K 3.9G 1% /var/run none 3.9G 0 3.9G 0% /var/lock none 3.9G 0 3.9G 0% /lib/init/rw /dev/md0 236M 59M 165M 27% /boot /dev/mapper/vg0-home 60G 58G 2.3G 97% /home

    Read the article

  • Exalogic 2.0.1 Tea Break Snippets - Creating a ModifyJeOS VirtualBox

    - by The Old Toxophilist
    Following on from my previous blog entry "Modifying the Base Template" I decided to put together a quick blog to show how to create a small VirtualBox, guest, that can be used to execute the ModifyJeOS and hence edit you templates. One of the main advantages of this is that Templates can be created away from the Exalogic Environment. For the Guest OS I chose OEL 6u3 and decided to create it as a basic server because I did not require a graphical interface but it's a simple change to create it with a GUI. Required Software Virtual Box. Oracle Enterprise Linux. Creating the VM I'll assume that the reader is experienced with Virtual Box and installing OEL and hence will make this section brief. Create VirtualBox Guest Create a new VirtualBox Guest and select oracle Linux 64 bit. Follow through the create process and select Dynamic Disk Size and the default 12GB disk size. The actual image will be a lot smaller than this but the OEL install will fail with insufficient disk space if you attempt a smaller size. Once the guest has been created attach the previously downloaded OEL 6u3 iso to the cd drive and start the guest. Install OEL On starting the guest the system will boot off the associated OEL 6u3 iso and take you through the standard installation process. Select all the appropriate information but when you reach the installation type select Basic Server because we do not need that additional packages and only need to access through the command line interface. Complete the installation and reboot the Guest. At this point we now have a basic OEL server running. Installing Guest Add-ons Before we can easily access the Guest we will need to add the VirtualBox guest add-ons. These will provide better keyboard and mouse integration and allow access the shared folders on the host machine. Before we can do this we will need to do the following: Enable Networking. Install additional rpms.  To enable the networking (eth0), that appears to be disabled by default, we can execute: ifup eth0 This will start the eth0 connection but once the Guest is rebooted the network will be down again. To resolve this you will need to edit the /etc/sysconfig/network-scripts/ifcfg-eth0 file and change the ONBOOT parameter to "yes". Now we have enabled the network we will need to install a number of addition rpm. First we will need to configure the yum repository as follows: [ol6_latest] name=Oracle Linux $releasever Latest ($basearch) baseurl=http://public-yum.oracle.com/repo/OracleLinux/OL6/latest/$basearch/ gpgkey=http://public-yum.oracle.com/RPM-GPG-KEY-oracle-ol6 gpgcheck=1 enabled=1 [ol6_ga_base] name=Oracle Linux $releasever GA installation media copy ($basearch) baseurl=http://public-yum.oracle.com/repo/OracleLinux/OL6/0/base/$basearch/ gpgkey=http://public-yum.oracle.com/RPM-GPG-KEY-oracle-ol6 gpgcheck=1 enabled=0 [ol6_u1_base] name=Oracle Linux $releasever Update 1 installation media copy ($basearch) baseurl=http://public-yum.oracle.com/repo/OracleLinux/OL6/1/base/$basearch/ gpgkey=http://public-yum.oracle.com/RPM-GPG-KEY-oracle-ol6 gpgcheck=1 enabled=0 [ol6_u2_base] name=Oracle Linux $releasever Update 2 installation media copy ($basearch) baseurl=http://public-yum.oracle.com/repo/OracleLinux/OL6/2/base/$basearch/ gpgkey=http://public-yum.oracle.com/RPM-GPG-KEY-oracle-ol6 gpgcheck=1 enabled=0 [ol6_u3_base] name=Oracle Linux $releasever Update 3 installation media copy ($basearch) baseurl=http://public-yum.oracle.com/repo/OracleLinux/OL6/3/base/$basearch/ gpgkey=http://public-yum.oracle.com/RPM-GPG-KEY-oracle-ol6 gpgcheck=1 enabled=0 [ol6_UEK_latest] name=Latest Unbreakable Enterprise Kernel for Oracle Linux $releasever ($basearch) baseurl=http://public-yum.oracle.com/repo/OracleLinux/OL6/UEK/latest/$basearch/ gpgkey=http://public-yum.oracle.com/RPM-GPG-KEY-oracle-ol6 gpgcheck=1 enabled=1 [ol6_UEK_base] name=Unbreakable Enterprise Kernel for Oracle Linux $releasever ($basearch) baseurl=http://public-yum.oracle.com/repo/OracleLinux/OL6/UEK/base/$basearch/ gpgkey=http://public-yum.oracle.com/RPM-GPG-KEY-oracle-ol6 gpgcheck=1 enabled=0 Once the repository has been edited we will need to execute the following yum commands: yum update yum install gcc yum install kernel-uek-devel yum install kernel-devel yum install createrepo At this point we now have all the additional packages required to install the VirtualBox Guest Add-ons. So select Devices->InstallGuest Additions on you running guest: This will simply place the VirtualBoxGuestAdditions.iso in the virtual cd and we will need to execute the following before we can run them. mkdir /media/cdrom mount -t iso9660 -o ro /dev/cdrom /media/cdrom cd /media/cdrom/ ls ./VBoxLinuxAdditions.run This will initiate the install and kernel rebuild. What you will notice is that during the installation a Failed will be displayed but this is simply because we have no graphical components. At this point we the installation will also have added the vboxsf group to the system and to access any shared folders we will create our user will need to be a member of this group an so the next stage is to add the root user to this group as follows: usermod -G vboxsf root cat /etc/group cat /etc/passwd init 0 Now simply shutdown the guest and add the Shared folder within your guests settings. Install ModifyJeOS Once the shared folder has been added restart the guest and change directory into the shared folder (/media/sf_<folder name>). For the next step I am assuming the ModifyJeOS rpms are located in the shared folder. We can simply execute: rpm -ivh ovm-modify-jeos-1.1.0-17.el5.noarch.rpm # Test with modifyjeos Using ModifyJeOS I have a modified MountSystemImg.sh script that should be copied into the /root/bin directory (you may need to create this) and from here it can be executed from any location: MountSystemImg.sh #!/bin/sh # The script assumes it's being run from the directory containing the System.img # Export for later i.e. during unmount export LOOP=`losetup -f` export SYSTEMIMG=/mnt/elsystem export TEMPLATEDIR=`pwd` # Make Temp Mount Directory mkdir -p $SYSTEMIMG # Create Loop for the System Image losetup $LOOP System.img kpartx -a $LOOP mount /dev/mapper/`basename $LOOP`p2 $SYSTEMIMG #Change Dir into mounted Image cd $SYSTEMIMG echo "######################################################################" echo "### ###" echo "### Starting Bash shell for editing. When completed log out to ###" echo "### Unmount the System.img file. ###" echo "### ###" echo "######################################################################" echo bash cd ~ cd $TEMPLATEDIR umount $SYSTEMIMG kpartx -d $LOOP losetup -d $LOOP rm -rf $SYSTEMIMG This script will simple create a mount directory, mount the System.img and then start a new shell in the mounted directory. On exiting the shell it will unmount the System.img. It only requires that you execute the script in the directory containing the System.img. These can be created under the mounted shared directory. In the example below I have extracted the Base template within the shared folder and then renamed it OEL_40GB_ROOT before changing into that directory and executing the script.

    Read the article

  • USB Flash Drive not Detected on 12.10 x64

    - by Falguni Roy
    My Mediatek usb flash drive is not get detected. The o/p of lsusb falguni@falguni-M61PME-S2P:~$ lsusb Bus 002 Device 002: ID 0e8d:0003 MediaTek Inc. Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub and the o/p of usb-devices falguni@falguni-M61PME-S2P:~$ usb-devices T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=480 MxCh=10 D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1d6b ProdID=0002 Rev=03.05 S: Manufacturer=Linux 3.5.0-18-generic ehci_hcd S: Product=EHCI Host Controller S: SerialNumber=0000:00:02.1 C: #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=0mA I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub T: Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh=10 D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1d6b ProdID=0001 Rev=03.05 S: Manufacturer=Linux 3.5.0-18-generic ohci_hcd S: Product=OHCI Host Controller S: SerialNumber=0000:00:02.0 C: #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=0mA I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub But in 12.04, the o/p of usb-devices was: falguni@falguni-M61PME-S2P:~$ usb-devices T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=480 MxCh=10 D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1d6b ProdID=0002 Rev=03.05 S: Manufacturer=Linux 3.5.0-18-generic ehci_hcd S: Product=EHCI Host Controller S: SerialNumber=0000:00:02.1 C: #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=0mA I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub T: Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh=10 D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1d6b ProdID=0001 Rev=03.05 S: Manufacturer=Linux 3.5.0-18-generic ohci_hcd S: Product=OHCI Host Controller S: SerialNumber=0000:00:02.0 C: #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=0mA I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub T: Bus=02 Lev=01 Prnt=01 Port=04 Cnt=01 Dev#= 2 Spd=12 MxCh= 0 D: Ver= 2.00 Cls=02(commc) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=0e8d ProdID=0003 Rev=02.00 S: Manufacturer=MediaTek Inc S: Product=MT6235 C: #Ifs= 2 Cfg#= 1 Atr=80 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_acm I: If#= 1 Alt= 0 #EPs= 1 Cls=02(commc) Sub=02 Prot=01 Driver=cdc_acm It was working fine in 12.04. Now after upgrading to 12.10 the problem started. Where is the problem and how to solve it?

    Read the article

  • TGIF: Engagement Wrap-up

    - by Michael Snow
    We've had a very busy week here at Oracle and as we build up to Oracle OpenWorld starting in less than 10 days - it doesn't look like things will be slowing down. Engagement is definitely in the air this week. Our friend, John Mancini published a great article entitled: "The World of Engagement" on his Digital Landfill blog yesterday and we hosted a great webcast with R "Ray" Wang from Constellation Research yesterday on the "9 C's of Engagement". 12.00 Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-family:"Calibri","sans-serif"; mso-bidi-font-family:"Times New Roman";} I wanted to wrap-up the week with some key takeaways from our webcast yesterday with Ray Wang. If you missed the webcast yesterday, fear not - it is now available  On-Demand. We'll leave you this week with lots of questions about how to navigate these churning waters of engagement. Stay tuned to the Oracle WebCenter Social Business Thought Leaders Webcast Series as we fuel this dialogue. 12.00 Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Calibri","sans-serif"; mso-bidi-font-family:"Times New Roman";} Company Culture Does company support a culture of putting customer satisfaction ahead of profits? Does culture promote creativity and cross functional employee collaboration? Does culture accept different views of multi-generational workforce? Does culture promote employee training and skills development Does culture support upward mobility and long term retention? Does culture support work-life balance? Does the culture provide rewards for employee for outstanding customer support? Channels What are the current primary channels for customer communications? What do you think will be the primary channels in two years? Is company developing support model for emerging channels? Do all channels consistently deliver the same level of customer support? Do you know the cost per transaction across all channels? Do you engage customers proactively across multiple channels? Do all channels have access to the same customer information? Community Does company extend customer support into virtual communities of interest? Does company facilitate educating users through its virtual communities? Does company mine its customer’s experience into useful data? Does company increase the value for customers through using data to deliver new products and services? Does company support two way interactions with its customers through communities of interest? Does company actively support social CRM, online communities and social media markets? Credibility Does company market its trustworthiness through external certificates such as business licenses, BBB certificates or other validations? Does company promote trust through customer testimonials and case studies on ethical business practices? Does company promote truthful market campaigns Does company make it easy for customers to complain? Does company build its reputation for standing behind its products with guarantees for satisfaction? Does company protect its customer data with high security measures> Content What sources do you use to create customer content? Does company mine social media and blogs for customer content? How does your company sort, store and retain its customer content? How frequently does content get updated? What external sources do you use for customer content? How many responses are typically received from a knowledge management system inquiry? Does your company use customer content to design and develop new product and services? Context Does your company market to customers in clusters or individually? Does your company customize its messages and personalize them to specific needs of each individual customer? Does your company store customer data based on their past behaviors, purchases, sentiment analysis and current activities? Does your company manage customer context according to channels used? For example identify personal use channels versus business channels? What is your frequency of collecting customer activities across various touch points? How is your customer data stored and analyzed? Is contextual data used for future customer outreach? Cadence Which channels does your company measure-web site visits, phone calls, IVR, store visits, face to face, social media? Does company make effective use of cross channel marketing to promote more frequent customer engagement? Does your company rate the patterns relevant for your product or service and monitor usage against this pattern? Does your company measure the frequency of both online and offline channels? Does your company apply metrics to the frequency of customer engagements with product or services revenues? Does your company consolidate data for customer engagement across various channels for a complete view of its customer? Catalyst Does company offer coupon discounts? Does company have a customer loyalty program or a VIP membership program? Does company mine customer data to target specific groups of buyers? Do internal employees serve as ambassadors for customer programs? Does company drive loyalty through social media loyalty programs? Does company build rewards based on using loyalty data? Does company offer an employee incentive program to drive customer loyalty?

    Read the article

  • APress Deal of the Day 19/Oct/2013 - Software Projects Secrets Why Projects Fail

    - by TATWORTH
    Originally posted on: http://geekswithblogs.net/TATWORTH/archive/2013/10/19/apress-deal-of-the-day-19oct2013---software-projects-secrets.aspxTod\y's $10 deal of the day from APress at http://www.apress.com/9781430251019 is Software Projects Secrets Why Projects Fail "Software Project Secrets: Why Software Projects Fail airs dirty laundry about the software industry—how putting project management's priorities above all else is the root cause of problems in software development projects. This book offers solutions to integrate project management with agile methodologies that really work for software development."

    Read the article

  • Default Wordpress site on IIS

    - by Mike
    We have multiple wordpress installations on our IIS7 (Windows Server 2008) Server as follows: http://www.example.com/site_one http://www.example.com/site_two http://www.example.com/site_three These all work properly. However we would like to configure it so that when users visit the root domain (http://www.example.com/) or any page underneath, ie: http://www.example.com/ http://www.example.com/page1 http://www.example.com/page2 They would actually see the corresponding pages for site_two: http://www.example.com/site_two/ http://www.example.com/site_two/page1 http://www.example.com/site_two/page2 How could we achieve this?

    Read the article

  • Authenticate user that has no password?

    - by Greg Treleaven
    I've set up my user account so that no password is required to login and I need to install some updates. However when prompted for the password, it says authentication failed if I leave the box blank. I don't have a password, how am I supposed to authenticate? EDIT I tried the method in Reset lost administrative(root) password but it came out with an error: Authentication token manipulation error password unchanged. What does this mean?

    Read the article

  • How to boot from a debootstrap based install?

    - by João Pinto
    I would like to boot a testing Ubuntu release from a directory (which contains a debootstrap based install). As far as I understand I just need someway to tell the boot process (initrd scripts?) that it should chroot() into the specified dir immediately after mounting the root partition, and then resume the regular upstart/init start. Could someone provide some instructions on how to achieve this?

    Read the article

  • Adding PostSharp to new projects, when it's installed for some projects in solution.

    - by Michael Freidgeim
    Recently I've posted my experience with installation of PostSharp Once PostSharp  is installed in  solution's packages folder for some project(s), I often need to add PostSharp to another project in the same solutionSection "Adding PostSharp to your project using PostSharp HQ" of documentation described the process quite well.I only want to add that the  actual location of  PostSharp HQ ( if it was installed from NuGet) is[solution root ]packages\PostSharp.2.1.7.15\tools\Release\PostSharp.HQ.exe.Also you need to ensure that the project is checked out,i.e. not readOnly.

    Read the article

  • alias with parameters

    - by dustyprogrammer
    I was recently starting to setup my usual alias. I ended up needing to pass more information than my alias originally needed $ alias runserver = 'python manage.py runserver' $ runserver 80 // turns out you need sudo $ sudo runserver 80 $ sudo: runserver: command not found Now as I was writing this i realized maybe the alias isn't set for root. Could that be it? If not, could someone explain why this doesn't work. Please and thank you

    Read the article

  • How to import or "using" a custom class in Unity script?

    - by Bobbake4
    I have downloaded the JSONObject plugin for parsing JSON in Unity but when I use it in a script I get an error indicating JSONObject cannot be found. My question is how do I use a custom object class defined inside another class. I know I need a using directive to solve this but I am not sure of the path to these custom objects I have imported. They are in the root project folder inside JSONObject folder and class is called JSONObject. Thanks

    Read the article

  • Settings are not being saved

    - by Gavin Panella
    Several weeks ago I updated a Facebook and Google accounts in Empathy to use per-application passwords. However, it forgets these passwords on each reboot and I have to enter them again. However, settings in Edit with Emacs in Chromium do not persist either, so I think this is more than a bug in Empathy. I tried mv ~/.gconf ~/.gconf.bak, but that didn't work. What other common denominators are there that might be at the root of this?

    Read the article

< Previous Page | 203 204 205 206 207 208 209 210 211 212 213 214  | Next Page >