Search Results

Search found 6020 results on 241 pages for 'valid'.

Page 207/241 | < Previous Page | 203 204 205 206 207 208 209 210 211 212 213 214  | Next Page >

  • Assigning address to array from heap

    - by Schaltfehler
    I want to save the state of my structs as a binary file and load them again. My structs look like this: typedef struct { uint8_t pointerLength; uint8_t *pointer; uint8_t NumBla; uinT16 Bla[MAX_NUM_Bla]; ... } BAR_STRUCT, *BAR; typedef struct { int numBar; BAR bars[MAX_NUM_BAR]; } FOO_STRUCT, *FOO; Saving is no problem, but restoring the state. Iam at the point where the bytestring from the file is on the heap and a pointer is pointing to the first adress of this string. And I do as follows: const void* dataPointer //points to adress in heap unsigned char* bytePointer = (unsigned char*)dataPointer; FOO foo = (FOO_STRUCT*)bytePointer; bytePointer += sizeof(FOO_STRUCT); for (int i=0; i < MAX_NUM_BAR; i++) { foo->bars[i] = (BAR_STRUCT*)bytePointer; } The last assignment doesn't work and I get an EXC_BAD_ACCESS. Because bars is an array of pointers i need to correct the adresses of each element is pointing to. Because they are not valid anymore. So I try to assign the adress of the object I saved in the bytesteam to foo-bars[i]; But I can not change foo-bars[i] at all. Accessing works but but assigning a new adress doesn't. I wonder why.

    Read the article

  • Apache2 configuration error: "<VirtualHost> was not closed" error

    - by Chris
    So I've already checked through my config file and I really can't see an instance where any tag hasn't been properly closed...but I keep getting this configuration error...Would you mind taking a look through the error and the config file below? Any assistance would be greatly appreciated. FYI, I've already googled the life out of the error and looked through the log extensively, I really can't find anything. Error: apache2: Syntax error on line 236 of /etc/apache2/apache2.conf: syntax error on line 1 of /etc/apache2/sites-enabled/000-default: /etc/apache2/sites-enabled/000-default:1: was not closed. Line 236 of apache2.conf: # Include the virtual host configurations: Include /etc/apache2/sites-enabled/ Contents of 000-default: <VirtualHost *:80> ServerAdmin webmaster@localhost DocumentRoot /var/www <Directory /> Options FollowSymLinks AllowOverride None </Directory> <Directory /var/www/> Options Indexes FollowSymLinks MultiViews AllowOverride None Order allow,deny allow from all </Directory> ScriptAlias /cgi-bin/ /usr/lib/cgi-bin/ <Directory "/usr/lib/cgi-bin"> AllowOverride None Options +ExecCGI -MultiViews +SymLinksIfOwnerMatch Order allow,deny Allow from all </Directory> ErrorLog /var/log/apache2/error.log # Possible values include: debug, info, notice, warn, error, crit, # alert, emerg. LogLevel warn CustomLog /var/log/apache2/access.log combined Alias /doc/ "/usr/share/doc/" <Directory "/usr/share/doc/"> Options Indexes MultiViews FollowSymLinks AllowOverride None Order deny,allow Deny from all Allow from 127.0.0.0/255.0.0.0 ::1/128 </Directory> </VirtualHost> <VirtualHost *:443> SetEnvIf Request_URI "^/u" dontlog ErrorLog /var/log/apache2/error.log Loglevel warn SSLEngine On SSLCertificateFile /etc/apache2/ssl/apache.pem ProxyRequests Off <Proxy *> AuthUserFile /srv/ajaxterm/.htpasswd AuthName EnterPassword AuthType Basic require valid-user Order Deny,allow Allow from all </Proxy> ProxyPass / http://localhost:8022/ ProxyPassReverse / http://localhost:8022/ </VirtualHost> UPDATE I had a load of other issues with my install so I wound up just wiping it and reinstalling. If I run into the same problem, I'll repost. Everyone, thanks for your help/suggestions.

    Read the article

  • Cacti: "An internal Net-Snmp error condition detected in Cacti snmp_count"

    - by Recc
    There's the odd forum topic about an error similarly obscure as this, but I haven't seen any for snmp_count in particular. Also I don't see graphing problems, though I can't simply go and eyeball all graphs. However the poller does time out and has to be stopped by its internal process preventing overruns. If I filter out the flood of this error in the log I dont get anything else except the poller timeout: 06/12/2014 12:48:00 PM - POLLER: Poller[0] Maximum runtime of 58 seconds exceeded. Exiting. 06/12/2014 12:48:00 PM - SYSTEM STATS: Time:58.8566 Method:spine Processes:1 Threads:40 Hosts:1923 HostsPerProcess:1923 DataSources:61584 RRDsProcessed:0 06/12/2014 12:48:00 PM - SPINE: Poller[0] ERROR: Spine Timed Out While Processing Hosts Internal I saw in the running processes /usr/local/spine/spine 0 2053 that's always left behind. When I kill it the flooding of the error stops. Of course it's the same on the next poll run as it goes through the devices. 2053 is apparently the DB ID for a device. I deleted it completely to see if that stops it. It doesn't, instead 2052 is seen there. I suspect It'll be the same if I keep deleting devices which I will not do. This started happening midday when I wasn't doing anything to the cacti server. I have tried reducing Maximum Threads per Process to 1 and Number of PHP Script Servers to 1. I've been running it at 10 script servers / 40 threads for months with poll cycle time of about 20 sec. I just found out Running snmpwalk on any host would begin returning the values but then timeout halfway through. This doesn't happen from different servers on the network this Cacti is suggesting still that it's a problem with it locally. Any suggestions? For one polling cycle I changed to use cmd.php instead. then I started getting errors like CMDPHP: Poller[0] Host[45] DS[541] WARNING: Result from SNMP not valid. Partial Result: U Perhaps as expected. Looking closely I see that every snmpwalk I do is interrupted at the same place as if some byte limit is hit and the connection torn down.

    Read the article

  • `svn checkout` on the SVN server causes the repo to break with a 301 error

    - by Phillip Oldham
    We have an nginx server which proxies to a standard set-up of Apache+SVN. The nginx set-up is a very simple proxy: server { server_name svn.ourdomain.tld; location / { proxy_pass http://localhost:8080; } } Apache is set-up as follows: <Location /> DAV svn SVNParentPath /var/svn AuthType Basic AuthName "Authentication Required" AuthUserFile /var/svn/.auth Require valid-user </Location> ...which allows us to access repositories using something like http://svn.ourdomain.tld/repo. We've been running this set-up now for about 2 years without issue. Recently we've found that we need to check out one of the repositories onto the server itself, however whenever we do so it seems to break the repo. From that point on, it will only respond with a 301 Moved Permanently error. We've tried: svn co file:///path/to/repo svn co svn://localhost/repo svn co svn://svn.ourdomain.tld/repo svn co svn+ssh://localhost/repo svn co svn+ssh://svn.ourdomain.tld/repo svn co http://localhost/repo svn co http://svn.ourdomain.tld/repo Also tried bypassing nginx, and get the same error: svn co http://localhost:8080/repo svn co http://svn.ourdomain.tld:8080/repo Checking out from a different machine works as expected until we attempt to check out on the server, after that it refuses with the same 301 error. What is more confusing is that this repository server also hosts our HudsonCI server, which can pulls and builds our projects hourly. This leads us to suspect that it's the svn client which is causing an error in communication. Its also very confusing that removing then re-creating the repo using svnadmin doesn't reset the error - the repo is still unavailable even though it's "new"! Restarting apache and subversion (svnserve) has no effect on this, or the original error. Version information: OS: 64-bit CentOS 4.2, 2.6.27 kernel svn client: 1.4.2 (same for both server and remote clients) svn server: 1.4.2 httpd: 2.2.3 UPDATE: This also happens with svn export when run on the repo server. Ran from any other box/client, there isn't a problem. Here's the workflow, to help clarify the error: [~repo-server~]# svnadmin create {repo}; chown -Rf www:www {repo} [remote-client]# svn checkout http://svn.ourdomain.tld/repo [remote-client]# svn add file; svn ci -m '' [~repo-server~]# cd /var/www; svn export file:///path/to/repo/trunk ourproject [remote-client]# svn update fails with 301 error I can also confirm that the hostname of the box doesn't have an effect here, which is very odd: whether or not svn.ourdomain.tld is added to /etc/hosts it still breaks - we thought it could be an issue with localhost routing, but that doesn't seem to be the case. Are we missing something in the documentation which states you can't checkout a repo when the server is on the same box? How can we stop the repos becoming corrupt when we checkout locally?

    Read the article

  • Proftpd on Ubuntu - Create directory permission denied (550 ) after upgrade to 9.10

    - by Ian
    Hi all, I am having problems with ProFTPD since I upgraded to Ubuntu 9.10 from 9.04. When I login as my ftp user (userftp) in the terminal I can create dirs fine in their home dir. But when I use ftp as this user permission is denied (550 asl: permission denied) when I try and do the same operation (creating a dir). Uploading files is fine though. I am using the same config for proftpd as I was before, I can't understand what's wrong. Any help appreciated! Config follows: Include /etc/proftpd/modules.conf UseIPv6 on IdentLookups off ServerName "whatever" ServerType inetd DeferWelcome off MultilineRFC2228 on DefaultServer on ShowSymlinks on TimeoutNoTransfer 600 TimeoutStalled 600 TimeoutIdle 1200 DisplayLogin welcome.msg DisplayChdir .message true ListOptions "-l" DenyFilter \*.*/ DefaultRoot ~ Port 21 <IfModule mod_dynmasq.c> </IfModule> MaxInstances 8 User proftpd Group nogroup Umask 022 022 AllowOverwrite on TransferLog /var/log/proftpd/xferlog SystemLog /var/log/proftpd/proftpd.log <IfModule mod_quotatab.c> QuotaEngine off </IfModule> <IfModule mod_ratio.c> Ratios off </IfModule> <IfModule mod_delay.c> DelayEngine on </IfModule> <IfModule mod_ctrls.c> ControlsEngine off ControlsMaxClients 2 ControlsLog /var/log/proftpd/controls.log ControlsInterval 5 ControlsSocket /var/run/proftpd/proftpd.sock </IfModule> <IfModule mod_ctrls_admin.c> AdminControlsEngine off </IfModule> # # My additions # MaxLoginAttempts 5 # # My user config # #VALID LOGINS <Limit LOGIN> AllowUser userftp DenyALL </Limit> <Directory /home/userftp> Umask 022 022 AllowOverwrite off <Limit MKD STOR DELE XMKD RNRF RNTO RMD XRMD> DenyAll </Limit> </Directory> <Directory /home/userftp/upload/> Umask 022 022 AllowOverwrite on <Limit READ> DenyAll </Limit> <Limit STOR CWD MKD RMD DELE> AllowAll </Limit> </Directory>

    Read the article

  • exchange web service C# code send email from home

    - by KK
    Is it possible to write C# code as below and send email using my home network? I have a valid user name and password on that exchange server. Is there any configuration that I can set to achieve this? BTW this code blow works when I run it within office network. I want this code to work when run from any network. String cMSExchangeWebServiceURL = (String)System.Configuration.ConfigurationSettings.AppSettings["MSExchangeWebServiceURL"]; String cEmail = (String)System.Configuration.ConfigurationSettings.AppSettings["Cemail"]; String cPassword = (String)System.Configuration.ConfigurationSettings.AppSettings["Cpassword"]; String cTo = (String)System.Configuration.ConfigurationSettings.AppSettings["CTo"]; ExchangeServiceBinding esb = new ExchangeServiceBinding(); esb.Timeout = 1800000; esb.AllowAutoRedirect = true; esb.UseDefaultCredentials = false; esb.Credentials = new NetworkCredential(cEmail, cPassword); esb.Url = cMSExchangeWebServiceURL; ServicePointManager.ServerCertificateValidationCallback += delegate(object sender1, X509Certificate certificate, X509Chain chain, SslPolicyErrors sslPolicyErrors) { return true; }; // Create a CreateItem request object CreateItemType request = new CreateItemType(); // Setup the request: // Indicate that we only want to send the message. No copy will be saved. request.MessageDisposition = MessageDispositionType.SendOnly; request.MessageDispositionSpecified = true; // Create a message object and set its properties MessageType message = new MessageType(); message.Subject = subject; message.Body = new TestOutgoingEmailServer.com.cogniti.mail1.BodyType(); message.Body.BodyType1 = BodyTypeType.HTML; message.Body.Value = body; message.ToRecipients = new EmailAddressType[3]; message.ToRecipients[0] = new EmailAddressType(); //message.ToRecipients[1] = new EmailAddressType(); //message.ToRecipients[2] = new EmailAddressType(); message.ToRecipients[0].EmailAddress = "[email protected]"; message.ToRecipients[0].RoutingType = "SMTP"; //message.CcRecipients = new EmailAddressType[1]; //message.CcRecipients[0] = new EmailAddressType(); //message.CcRecipients[0].EmailAddress = toEmailAddress.ElementAt(1).ToString(); //message.CcRecipients[0].RoutingType = "SMTP"; //There are some more properties in MessageType object //you can set all according to your requirement // Construct the array of items to send request.Items = new NonEmptyArrayOfAllItemsType(); request.Items.Items = new ItemType[1]; request.Items.Items[0] = message; // Call the CreateItem EWS method. CreateItemResponseType response = esb.CreateItem(request);

    Read the article

  • DHCP "no answer" on CentOS 6.4

    - by Kev
    I installed a DHCP server (yum install dhcp) and this is my conf: # create new # specify domain name option domain-name "mydomain.name"; # specify DNS's hostname or IP address option domain-name-servers 10.0.1.1, 10.0.1.2; option ntp-servers 10.0.1.1, 10.0.1.2; allow unknown-clients; # default lease time default-lease-time 2628000; # max lease time max-lease-time 2628000; # about a month # this DHCP server to be declared valid authoritative; # specify network address and subnet mask subnet 10.0.0.0 netmask 255.0.0.0 { # specify the range of lease IP address range dynamic-bootp 10.0.2.1 10.0.2.50; # specify broadcast address option broadcast-address 10.255.255.255; # specify default gateway option routers 10.0.0.1; allow unknown-clients; } service dhcp start reports [ OK ]. Yet, if I disable my other DHCP server (Win2k3) and get a client to try renewing its IP lease, it times out. So I installed dhcping. No matter what options I try, including directing dhcping at my server, adding a client address in the range, adding my hardware address, it replies 'no answer'. I'm also trying -i since that seems to be more akin to what a WinXP client would try to do, based on /var/log/messages. It logs the attempts (from dhcping here) as: Oct 24 18:55:13 newdc dhcpd: DHCPINFORM from 10.0.2.15 via eth0:4 Oct 24 18:55:13 newdc dhcpd: DHCPACK to 10.0.2.15 (00:11:25:66:4e:7f) via eth0:4 Oct 24 18:55:13 newdc dhcpd: DHCPINFORM from 10.0.2.15 via eth0:3 Oct 24 18:55:13 newdc dhcpd: DHCPACK to 10.0.2.15 (00:11:25:66:4e:7f) via eth0:3 Oct 24 18:55:13 newdc dhcpd: DHCPINFORM from 10.0.2.15 via eth0 Oct 24 18:55:13 newdc dhcpd: DHCPACK to 10.0.2.15 (00:11:25:66:4e:7f) via eth0 The :3 and :4 are because I have a few extra Host(A) records for this server so it responds on more than one IP for our intranet app. No answer? It sounds like it should be getting three answers...no? (And if that's the problem, how do I limit the DHCP service to replying from eth0?)

    Read the article

  • svn 503 error when commit new files

    - by philipp
    I am struggling with a strange error when I try to commit my repository. I have a V-server with webmin installed on it. Via Webmin I installed an svn module, created repositories and everything worked fine until three days ago. Trying to commit brings the following error: Commit failed (details follow): Server sent unexpected return value (503 Service unavailable) in response to PROPFIND request for '/svn/rle/!svn/wrk/a1f963a7-0a33-fa48-bfde-183ea06ab958/RLE/.htaccess' Server sent unexpected return value (503 Service unavailable) in response to PROPFIND request for '/svn/rle/RLE/.htaccess' I google everywhere and found only very few solutions. One indicated that a wrong error document is set, another one dealt about the problem that filenames might cause this error and last but not least a wrong proxy configuration in the local svn config could be the reason. After trying all of the solutions suggested I could not reach anything. Only after a server reboot there was a little difference in the error-message, telling me that the server was not able to move a temp file, because the operation was permitted. So I also controlled the permissions of the svn directory, but also with no success. An svn update than restored the "normal" error from above and nothing changed since then. The only change I made on the server, I guess that this could be the reason why svn does not work anymore, was to install the php5_mysql module for apache via apt-get install php5_mysql. Atg the moment I have totally no idea where I could search. I don't know if the problem is on my server or in my repository and I would be glad to get any hint to solve this. Thanks in advance Greetings philipp error log: [Tue Oct 25 19:23:02 2011] [error] [client 217.50.254.18] Could not create activity /svn/rle/!svn/act/d8dd436f-d014-f047-8e87-01baac46a593. [500, #0] Tue Oct 25 19:23:02 2011] [error] [client 217.50.254.18] could not begin a transaction [500, #1] [Tue Oct 25 19:24:21 2011] [error] [client 217.50.254.18] Could not create activity /svn/rle/!svn/act/adac52c2-6f46-f540-b218-2f2ff03b51a4. [500, #0] http.conf: <Location /svn> DAV svn SVNParentPath /home/xxx/svn AuthType Basic AuthName xxx.de AuthUserFile /home/xxx/etc/svn.basic.passwd Require valid-user AuthzSVNAccessFile /home/xxx/etc/svn-access.conf Satisfy Any ErrorDocument 404 default RewriteEngine off </Location> The permissions for the repository directory are : rwxrwxrwx (0777). the directory /svn/rle/!svn/act/adac52c2-6f46-f540-b218-2f2ff03b51a4 does not exist on the server. I think this is part of the repository. So, I just just want to admit that i tried to reach the repository via Browser and i worked, I could see everything, so the error only occurs when I try to commit new files. I also created a second repository and tried to commit files in there, what gave me the same error.

    Read the article

  • Virtual Machines List from PowerShell vs PowerShell ISE and PowerGUI

    - by slybloty
    I am confused to why I have different information based on where I try to retrieve it from. I have 3 Windows 2012 servers (G0, G1, and G2) running Hyper-V. The following situation is captured from one server which I use to run scripts and control the others. What I'm trying to do is to get a list of the virtual machines in existence on these 3 machines: Using PowerGUI and PowerShell ISE: PS > Get-VMHost | select name Name ---- G0.nothing.com G2.nothing.com G1.nothing.com PS > Get-VMHost | Get-VM | select name Name ---- VM1628856-4 VM1628856-2 VM1628856-6 VM1628856-3 VM1628856-1 VM1628856-5 Using PowerShell: PS > Get-VMHost | select name Name ---- G0 PS > Get-VM Name State CPUUsage(%) MemoryAssigned(M) Uptime Status ---- ----- ----------- ----------------- ------ ------ VM1107610-1 OffCritical 0 0 00:00:00 Cannot connect to virtual machine configuration storage VM1390728-1 OffCritical 0 0 00:00:00 Cannot connect to virtual machine configuration storage VM1393540-1 OffCritical 0 0 00:00:00 Cannot connect to virtual machine configuration storage VM1393540-10 OffCritical 0 0 00:00:00 Cannot connect to virtual machine configuration storage VM1393540-2 OffCritical 0 0 00:00:00 Cannot connect to virtual machine configuration storage VM1393540-3 OffCritical 0 0 00:00:00 Cannot connect to virtual machine configuration storage VM1393540-4 OffCritical 0 0 00:00:00 Cannot connect to virtual machine configuration storage VM1393540-5 OffCritical 0 0 00:00:00 Cannot connect to virtual machine configuration storage VM1393540-6 OffCritical 0 0 00:00:00 Cannot connect to virtual machine configuration storage VM1393540-7 OffCritical 0 0 00:00:00 Cannot connect to virtual machine configuration storage VM1393540-8 OffCritical 0 0 00:00:00 Cannot connect to virtual machine configuration storage VM1393540-9 OffCritical 0 0 00:00:00 Cannot connect to virtual machine configuration storage VM1833022-1 OffCritical 0 0 00:00:00 Cannot connect to virtual machine configuration storage My main concern is that I don't have reliable information from the 3 tools. The Hyper-V Manager application shows the same list as the PowerShell does. But if I run my scripts from the other two tools, which is what I mostly do, I don't have the same information available, therefore I can't manipulate the same VMs. I've also noticed that the Virtual Machine Manager shows the same list of VMs as the first two tools, PowerGUI and PowerShell ISE. Which information is valid? And how can I retrieve the correct list of VMs? EDIT 1 The $env:psmodulepath value: PS > $env:psmodulepath C:\Users\administrator\Documents\WindowsPowerShell\Modules; C:\Windows\system32\WindowsPowerShell\v1.0\Modules\; C:\Program Files (x86)\Microsoft SQL Server\110\Tools\PowerShell\Modules\; C:\Program Files\Microsoft System Center 2012\Virtual Machine Manager\bin\Configuration Providers\; C:\Program Files\Microsoft System Center 2012\Virtual Machine Manager\bin\psModules\; C:\Program Files (x86)\QLogic Corporation\QInstaller\Modules EDIT 2 PowerShell is using this Hyper-V module: C:\Windows\Microsoft.Net\assembly\GAC_MSIL\Microsoft.HyperV.PowerShell\v4.0_6.3.0.0__31bf3856ad364e35\Microsoft.HyperV.PowerShell.dll And PowerGUI is using this one: C:\Windows\System32\WindowsPowerShell\v1.0\Modules\Hyper-V\Hyper-V.psd1 If I try to load the module used by PowerShell onto PowerGUI I still get the same different results. How can I receive the correct information listed under Hyper-V using PowerGUI or PowerShell ISE?

    Read the article

  • Linux boot on a raid1 software raid ?

    - by azera
    Hello I am trying to convert my single disk boot to a raid1 boot So far here is what i have: I sucessfully create the raid 1 as degraded with the new drive alone, I copied all the data on it I can mount that raid 1, see its files etc I already have a raid5 that is working on the same box (although not booting on it) I have installed grub on both drive When grub boot, it loads the kernel alright, but during the kernel boot it fails to load the "root block device" The kernel tells me : 1 - detected that root device is an md device 2 - determining root devices 3 - mounting root 4 - mounting /dev/md125 on /newroot failed: input/output error. Please enter another root device: ... At this point, if I enter /dev/sda3 (my "old" root device that isn't converted to raid yet) everything boots fine without the root. The /dev/md125 device is indeed created but it seems to be created after the error happens, as in it creates it after loading the device, when mdadm is loaded. Somehow it looks like it can't/doesn't load the raid array before it needs to mount it, and I don't know how I can solve that. My config files (taken from the system once it boots with sda3 as root device): $ cat /etc/mdadm.conf ARRAY /dev/md/md0-r5 metadata=0.90 UUID=1a118934:c831bdb3:64188b84:66721085 ARRAY /dev/md125 metadata=0.90 UUID=48ec4190:a80d4dde:64188b84:66721085 $ cat /proc/mdstat Personalities : [raid1] [raid6] [raid5] [raid4] [raid0] [raid10] md125 : active raid1 sdc3[1] 477853312 blocks [2/1] [_U] md127 : active raid5 sdd[0] sdf[3] sdb[2] sde[1] 4395415488 blocks level 5, 64k chunk, algorithm 2 [4/4] [UUUU] unused devices: <none> $ cat /boot/grub/menu.lst default 0 timeout 8 splashimage=(hd0,0)/boot/grub/splash.xpm.gz title Gentoo Linux 2.6.31-r10 root (hd0,0) #kernel /boot/kernel-genkernel-x86_64-2.6.31-gentoo-r10 root=/dev/ram0 real_root=/dev/sda3 kernel /boot/kernel-genkernel-x86_64-2.6.31-gentoo-r10 root=/dev/md125 md=125,/dev/sdc3,/dev/sda3 initrd /boot/initramfs-genkernel-x86_64-2.6.31-gentoo-r10 # blkid /dev/sda1: UUID="89fee223-b845-4e0a-8a0b-e6cf695d5bcf" TYPE="ext2" /dev/sda2: UUID="a72296a8-d7d4-447f-a34b-ee920fd1a767" TYPE="swap" /dev/sda3: UUID="97eb0a6a-c385-4a9d-bf74-c0bab1fa4dc1" TYPE="ext3" /dev/sdb: UUID="1a118934-c831-bdb3-6418-8b8466721085" TYPE="linux_raid_member" /dev/sdc1: UUID="d36537fd-19a0-b8a3-6418-8b8466721085" TYPE="linux_raid_member" /dev/sdd: UUID="1a118934-c831-bdb3-6418-8b8466721085" TYPE="linux_raid_member" /dev/sde: UUID="1a118934-c831-bdb3-6418-8b8466721085" TYPE="linux_raid_member" /dev/md127: UUID="13a41589-4cf1-4c04-91ca-37484182c783" TYPE="ext4" /dev/sdf: UUID="1a118934-c831-bdb3-6418-8b8466721085" TYPE="linux_raid_member" /dev/sdc2: UUID="a1916397-1b48-45d7-9f98-73aa521e882f" TYPE="swap" /dev/sdc3: UUID="48ec4190-a80d-4dde-6418-8b8466721085" TYPE="linux_raid_member" /dev/md125: UUID="c947ed64-1d4d-4d1d-b4d2-24669fff916e" SEC_TYPE="ext2" TYPE="ext3" # mdadm -E mdadm: No devices to examine # fdisk -l Disk /dev/sda: 500.1 GB, 500107862016 bytes 255 heads, 63 sectors/track, 60801 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Disk identifier: 0xe975e9fc Device Boot Start End Blocks Id System /dev/sda1 1 5 40131 83 Linux /dev/sda2 6 1311 10490445 82 Linux swap / Solaris /dev/sda3 1312 60801 477853425 83 Linux Disk /dev/sdc: 500.1 GB, 500107862016 bytes 255 heads, 63 sectors/track, 60801 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Disk identifier: 0xe975e9fc Device Boot Start End Blocks Id System /dev/sdc1 1 5 40131 83 Linux /dev/sdc2 6 1311 10490445 82 Linux swap / Solaris /dev/sdc3 1312 60801 477853425 83 Linux Disk /dev/md125: 489.3 GB, 489321791488 bytes 2 heads, 4 sectors/track, 119463328 cylinders Units = cylinders of 8 * 512 = 4096 bytes Disk identifier: 0x00000000 Disk /dev/md125 doesn't contain a valid partition table

    Read the article

  • Cannot exclude a path from basic auth when using a front controller script

    - by Adam Monsen
    I have a small PHP/Apache2 web application wherein I'd like to do two seemingly incompatible operations: Route all requests through a single PHP script (a "front controller", if you will) Secure everything except API calls with HTTP basic authentication I can satisfy either requirement just fine in isolation, it's when I try to do both at once that I am blocked. For no good reason I'm trying to accomplish these requirements solely with Apache configuration. Here are the requirements stated as an example. A GET request for this URL: http://basic/api/listcars?max=10 should be sent through front.php without requiring basic auth. front.php will get /api/listcars?max=10 and do whatever it needs to with that. Here's what I think should work. In my /etc/hosts I added 127.0.0.1 basic and I am using this Apache config: <Location /> AuthType Basic AuthName "Home Secure" AuthUserFile /etc/apache2/passwords require valid-user </Location> <VirtualHost *:80> ServerName basic DocumentRoot /var/www/basic <Directory /var/www/basic> <IfModule mod_rewrite.c> RewriteEngine On RewriteCond %{SCRIPT_FILENAME} !-f RewriteCond %{SCRIPT_FILENAME} !-d RewriteRule ^(.*)$ /front.php/$1 [QSA,L] </IfModule> </Directory> <Location /api> Order deny,allow Allow from all Satisfy any </Location> </VirtualHost> But I still always get a HTTP 401: Authorization Required response. I can make it work by changing <Location /api> into <Location ~ /api> but this allows more than I want to past basic auth. I also tried changing the <Directory /var/www/basic> section into <Location />, but this doesn't work either (and it results in some strange values for PATH_TRANSLATED being passed to the script). I searched around and found many examples of selective exclusion of basic auth, but none that also incorporated a front controller. I could certainly do something like handle basic auth in the front controller, but if I can have Apache do that instead I'll be able to keep all authentication logic out of my PHP code. A friend suggested splitting this into two vhosts, which I know also works. This used to be two separate vhosts, actually. I'm using Apache 2.2.22 / PHP 5.3.10 on Ubuntu 12.04.

    Read the article

  • MariaDB doesn't upgrade, 2 versions are installed

    - by zahorak
    I have a server running on Debian wheezy with MaraiDB and OwnCloud. Few days ago, I wanted to update the packages because of the OwnCloud updates but something went wrong. Usually in this case I'd probably try to remove and again install the problematic packages, but on a server which is used by different people it doesn't seem like a valid solution anymore. Here you can see my console output: user@server:~$ sudo apt-get upgrade Reading package lists... Done Building dependency tree Reading state information... Done You might want to run 'apt-get -f install' to correct these. The following packages have unmet dependencies: libmariadbclient18 : Depends: libmysqlclient18 (= 10.0.4+maria-1~wheezy) but 10.0.5+maria-1~wheezy is installed libmysqlclient18 : Depends: libmariadbclient18 (= 10.0.5+maria-1~wheezy) but 10.0.4+maria-1~wheezy is installed mariadb-client-10.0 : Depends: libmariadbclient18 (>= 10.0.5+maria-1~wheezy) but 10.0.4+maria-1~wheezy is installed mariadb-client-core-10.0 : Depends: libmariadbclient18 (>= 10.0.5+maria-1~wheezy) but 10.0.4+maria-1~wheezy is installed mariadb-server : Depends: mariadb-server-10.0 (= 10.0.5+maria-1~wheezy) but 10.0.4+maria-1~wheezy is installed mariadb-server-core-10.0 : Depends: libmariadbclient18 (>= 10.0.5+maria-1~wheezy) but 10.0.4+maria-1~wheezy is installed E: Unmet dependencies. Try using -f. user@server:~$ sudo apt-get upgrade -f Reading package lists... Done Building dependency tree Reading state information... Done Correcting dependencies... Done The following packages will be upgraded: libmariadbclient18 mariadb-server-10.0 owncloud 3 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. 7 not fully installed or removed. Need to get 0 B/37.2 MB of archives. After this operation, 3,565 kB of additional disk space will be used. Do you want to continue [Y/n]? Y Preconfiguring packages ... (Reading database ... 35901 files and directories currently installed.) Preparing to replace libmariadbclient18 10.0.4+maria-1~wheezy (using .../libmariadbclient18_10.0.5+maria-1~wheezy_amd64.deb) ... Unpacking replacement libmariadbclient18 ... dpkg: error processing /var/cache/apt/archives/libmariadbclient18_10.0.5+maria-1~wheezy_amd64.deb (--unpack): trying to overwrite '/usr/lib/mysql/plugin/dialog.so', which is also in package mariadb-server-10.0 10.0.4+maria-1~wheezy Errors were encountered while processing: /var/cache/apt/archives/libmariadbclient18_10.0.5+maria-1~wheezy_amd64.deb E: Sub-process /usr/bin/dpkg returned an error code (1) I tried removing the 10.0.4 package version of libmariadbclient18 but I wasn't really successful in doing that. So my last hope is here, do you have any ideas how exactly I could fix this issue? Thx very much

    Read the article

  • Basic Auth on DirectoryIndex Only

    - by Brad
    I am trying to configure basic auth for my index file, and only my index file. I have configured it like so: <Files index.htm> Order allow,deny Allow from all AuthType Basic AuthName "Some Auth" AuthUserFile "C:/path/to/my/.htpasswd" Require valid-user </Files> When I visit the page, 401 Authorization Required is returned as expected, but the browser doesn't prompt for the username/password. Some further inspection has revealed that Apache is not sending the WWW-Authenticate header. GET http://myhost/ HTTP/1.1 Host: myhost Connection: keep-alive User-Agent: Mozilla/5.0 (Windows NT 5.1) AppleWebKit/534.30 (KHTML, like Gecko) Chrome/12.0.742.100 Safari/534.30 Accept: text/html,application/xhtml+xml,application/xml;q=0.9,*/*;q=0.8 Accept-Encoding: gzip,deflate,sdch Accept-Language: en-US,en;q=0.8 Accept-Charset: ISO-8859-1,utf-8;q=0.7,*;q=0.3 HTTP/1.1 401 Authorization Required Date: Tue, 21 Jun 2011 21:36:48 GMT Server: Apache/2.2.16 (Win32) Content-Length: 401 Keep-Alive: timeout=5, max=100 Connection: Keep-Alive Content-Type: text/html; charset=iso-8859-1 <!DOCTYPE HTML PUBLIC "-//IETF//DTD HTML 2.0//EN"> <html><head> <title>401 Authorization Required</title> </head><body> <h1>Authorization Required</h1> <p>This server could not verify that you are authorized to access the document requested. Either you supplied the wrong credentials (e.g., bad password), or your browser doesn't understand how to supply the credentials required.</p> </body></html> Why is Apache doing this? How can I configure it to send that header appropriately? It is worth noting that this exact same set of directives work fine if I set them for a whole directory. It is only when I configure them to a directory index that they do not work. This is how I know my .htpasswd and such are fine. I am using Apache 2.2 on Windows. On another note, I found this listed as a bug in Apache 1.3. This leads me to believe that this is actually a configuration problem on my end.

    Read the article

  • Unable to start SQL Server Instance 2008 R2 - DB file corrupt

    - by Velu
    I was not able to start the SQL Server 2008 R2 production DB instance. After reading the log file error message is " The log scan number passed to log scan in database ‘master’ is not valid. This error may indicate data corruption or that the log file (.ldf) does not match the data file (.mdf). If this error occurred during replication, re-create the publication." After reading several post i realize that my MASTER DB file is corrupted. I have followed the below setup Copy the Master.mdf and Masterlog.ldf file from Template location to My Database Data folder. C:\Program Files\Microsoft SQL Server\MSSQL10_50.MSSQLSERVER\MSSQL\Binn\Templates to D:\MSSQL\MSSQL10_50.MSSQLSERVER\MSSQL\DATA Note: Same error occur when i copy the all DB file like Master, MasterLog, MSDBData, MSDBlog, Model and ModelLog When i run my MSSQLSEVER instance different problem occur. In My server i had only C, D- Drive i dont have the E drive. How can i override these below error path. Error LOG 2012-10-24 02:51:12.79 spid5s Error: 17204, Severity: 16, State: 1. 2012-10-24 02:51:12.79 spid5s FCB::Open failed: Could not open file e:\sql10_main_t.obj.x86fre\sql\mkmastr\databases\objfre\i386\MSDBData.mdf for file number 1. OS error: 3(The system cannot find the path specified.). 2012-10-24 02:51:12.79 spid5s Error: 5120, Severity: 16, State: 101. 2012-10-24 02:51:12.79 spid5s Unable to open the physical file "e:\sql10_main_t.obj.x86fre\sql\mkmastr\databases\objfre\i386\MSDBData.mdf". Operating system error 3: "3(The system cannot find the path specified.)". 2012-10-24 02:51:12.79 spid5s Error: 17207, Severity: 16, State: 1. 2012-10-24 02:51:12.79 spid5s FileMgr::StartLogFiles: Operating system error 2(The system cannot find the file specified.) occurred while creating or opening file 'e:\sql10_main_t.obj.x86fre\sql\mkmastr\databases\objfre\i386\MSDBLog.ldf'. Diagnose and correct the operating system error, and retry the operation. 2012-10-24 02:51:12.79 spid5s File activation failure. The physical file name "e:\sql10_main_t.obj.x86fre\sql\mkmastr\databases\objfre\i386\MSDBLog.ldf" may be incorrect.

    Read the article

  • Configuring OpenLDAP as a Active Directory Proxy

    - by vadensumbra
    We try to set up an Active Directory server for company-wide authentication. Some of the servers that should authenticate against the AD are placed in a DMZ, so we thought of using a LDAP-server as a proxy, so that only 1 server in the DMZ has to connect to the LAN where the AD-server is placed). With some googling it was no problem to configure the slapd (see slapd.conf below) and it seemed to work when using the ldapsearch tool, so we tried to use it in apache2 htaccess to authenticate the user over the LDAP-proxy. And here comes the problem: We found out the username in the AD is stored in the attribute 'sAMAccountName' so we configured it in .htaccess (see below) but the login didn't work. In the syslog we found out that the filter for the ldapsearch was not (like it should be) '(&(objectClass=*)(sAMAccountName=authtest01))' but '(&(objectClass=*)(?=undefined))' which we found out is slapd's way to show that the attribute do not exists or the value is syntactically wrong for this attribute. We thought of a missing schema and found the microsoft.schema (and the .std / .ext ones of it) and tried to include them in the slapd.conf. Which does not work. We found no working schemata so we just picked out the part about the sAMAccountName and build a microsoft.minimal.schema (see below) that we included. Now we get the more precise log in the syslog: Jun 16 13:32:04 breauthsrv01 slapd[21229]: get_ava: illegal value for attributeType sAMAccountName Jun 16 13:32:04 breauthsrv01 slapd[21229]: conn=0 op=1 SRCH base="ou=oraise,dc=int,dc=oraise,dc=de" scope=2 deref=3 filter="(&(objectClass=\*)(?sAMAccountName=authtest01))" Jun 16 13:32:04 breauthsrv01 slapd[21229]: conn=0 op=1 SRCH attr=sAMAccountName Jun 16 13:32:04 breauthsrv01 slapd[21229]: conn=0 op=1 SEARCH RESULT tag=101 err=0 nentries=0 text= Using our Apache htaccess directly with the AD via LDAP works though. Anyone got a working setup? Thanks for any help in advance: slapd.conf: allow bind_v2 include /etc/ldap/schema/core.schema ... include /etc/ldap/schema/microsoft.minimal.schema ... backend ldap database ldap suffix "ou=xxx,dc=int,dc=xxx,dc=de" uri "ldap://80.156.177.161:389" acl-bind bindmethod=simple binddn="CN=authtest01,ou=GPO-Test,ou=xxx,dc=int,dc=xxx,dc=de" credentials=xxxxx .htaccess: AuthBasicProvider ldap AuthType basic AuthName "AuthTest" AuthLDAPURL "ldap://breauthsrv01.xxx.de:389/OU=xxx,DC=int,DC=xxx,DC=de?sAMAccountName?sub" AuthzLDAPAuthoritative On AuthLDAPGroupAttribute member AuthLDAPBindDN CN=authtest02,OU=GPO-Test,OU=xxx,DC=int,DC=xxx,DC=de AuthLDAPBindPassword test123 Require valid-user microsoft.minimal.schema: attributetype ( 1.2.840.113556.1.4.221 NAME 'sAMAccountName' SYNTAX '1.3.6.1.4.1.1466.115.121.1.15' SINGLE-VALUE )

    Read the article

  • Outlook Anywhere inconsistencies with authentication methods

    - by gravyface
    So I've read this question and attempted just about every other workaround I've found online. Problem seems completely illogical to me, anyways: SBS 2011, vanilla install; haven't touched anything in IIS or Exchange outside of what's been done through the checklist (brand new domain, completely new customer) except to import an existing wildcard certificate for *.example.com (which is valid, Remote Web Workplace and Outlook Web Access work fine). On the two test machines and one production machine running a mixture of Windows XP Pro, Windows 7 and Outlook 2003 through to 2010, I've had no problem saving the password after configuring Outlook Anywhere using the wrong authentication method. I repeat, I have had no issues using the wrong authentication method on these test machines; password saves the first time, no problem, can verify it exists in the credentials manager (Start Run control userpasswords2), close Outlook, reboot, go make a sammie, come back, credentials are still saved. When I say wrong, it's because I was choosing NTLM and Exchange (under Exchange Console Server Configuration Client Access) was set by default to use Basic. On two completely different machines setup by a co-worker, they had (under my guidance) used NTLM as well... except that frustratingly, Outlook would always ask for a password. One machine was Windows XP with Outlook 2010, the other was Windows 7 with Outlook 2003. When these two machines were set to use Basic -- the correct settings -- the option to save was there and now works without issue. Puzzled by how my machines could possibly work with the wrong authentication, I then went into one of them and changed the authentication method to Basic. Now here's where it gets a little crazy: if I go under Outlook and change the authentication to use the correct setting (Basic) it fails to save the password and Outlook prompts every time (without a "remember me" checkbox). I have not had a chance to change it to Basic on the other two machines to see if this is just a fluke or not, but something just isn't right here. My two hunches are either a missing/installed KB Update or perhaps a local security policy. I should add that none of the 5 test machines in the equation here have ever been joined to the domain.

    Read the article

  • ISAPI filter with LDAP over SSL only works as administrator

    - by Zac
    I have created an ISAPI filter for IIS 6.0 that tries to authenticate against Active directory using LDAP. The filter works fine when authenticating regularly over port 389, but when I try to use SSL, I always get the 0x51 Server Down error at the ldap_connect() call. Even skipping the connect call and using ldap_simple_bind_s() results in the same error. The weird thing is that if I change the app pool identity to the local admin account, then the filter works fine and LDAP over SSL is successful. I created an exe with the same code below and ran it on the server as admin and it works. Using the default NETWORK SERVICE identity for the site's app pool is what seems to be the problem. Any thoughts as to what is happening? I want to use the default identity since I don't want the website to have elevated admin privileges. The server is in a DMZ outside the network and domain where our DCs are that run AD. We have a valid certificate on our DCs for AD as well. Code: // Initialize LDAP connection LDAP * ldap = ldap_sslinit(servers, LDAP_SSL_PORT, 1); ULONG version = LDAP_VERSION3; if (ldap == NULL) { strcpy(error_msg, ldap_err2string(LdapGetLastError())); valid_user = false; } else { // Set LDAP options ldap_set_option(ldap, LDAP_OPT_PROTOCOL_VERSION, (void *) &version); ldap_set_option(ldap, LDAP_OPT_SSL, LDAP_OPT_ON); // Make the connection ldap_response = ldap_connect(ldap, NULL); // <-- Error occurs here! // Bind and continue... } UPDATE: I created a new user without admin privileges and ran the test exe as the new user and I got the same Server Down error. I added the user to the Administrators group and got the same error as well. The only user that seems to work with LDAP over SSL authentication on this particular server is administrator. The web server with the ISAPI filter (and where I've been running the test exe) is running Windows Server 2003. The DCs with AD on them are running 2008 R2. Also worth mentioning, we have a WordPress site on the same server that authenticates against LDAP over SSL using PHP (OpenLDAP) and there's no problem there. I have an ldap.conf file that specifies TLS_REQCERT never and the user running the PHP code is IUSR.

    Read the article

  • Ubuntu 12.04: apt-get "failed to fetch"; apt is trying to fetch via old static IP

    - by gabe
    Sample error: W: Failed to fetch http://security.ubuntu.com/ubuntu/dists/precise-security/universe/i18n/Translation-en Unable to connect to 192.168.1.70:8118: Now this was working just fine until I changed the IP this morning. I have the server set to a static IP of 10.0.1.70 and for years it has been 192.168.1.70 - the IP apt-get is trying to use right now. I use privoxy and tor thus the 8118 port. Like I said it all worked until I changed the static IP from 192.168.1.70 to 10.0.1.70. I was forced to do so because of router issues. (Long and involved story, I didn't really want to change the IP because I know something like this would happen.) The setup for TOR/Privoxy requires that has you point Privoxy at TOR via 127.0.0.1:9050. Then point curl, etc to Privoxy via $HOME/.bashrc. Typically you would set the listen to IP for Privoxy to 127.0.0.1 but if you want it accessible to the rest of the LAN you set the IP to the server's LAN IP. Which I did a long time ago and was working fine until this morning. I have changed all instances of 192.168.1.70 to 10.0.1.70 in both /etc/privoxy/config and $HOME/.bashrc. What makes this really strange for me is that curl is working fine. I curl icanhazip.com and voila I get a new IP every 10 minutes or so. I curl CNN.com and I get the short but sweet permanently moved to www.cnn.com message I expect. Firefox works fine. Ping works fine. And I've tested all of this via Remote Desktop over my LAN. So the connection appears to be fine for everything except apt. I've also rebooted hoping that would clear 192.168.1.70 from apt. So the connection to the internet and DNS aren't an issue for these programs. And they are, as far as I can tell, using Privoxy/TOR just fine. The real irony here is that I've tried to open up Privoxy to go to Ubuntu's servers directly without going through TOR to speed up the downloads from Ubuntu (did this months ago). So somewhere that I have not been able to find, apt has stored the IP 192.168.1.70. And 192.168.1.70 is no longer valid. Thanks for the help

    Read the article

  • setting up a basic mod_proxy virtual host

    - by SevenProxies
    I'm trying to set up a basic virtual host to proxy all requests to test.local to a WEBrick server I have running on 127.0.0.1:8080 while keeping all requests to localhost going to my static files in /var/www. I'm running Ubuntu 10.04. I have libapache2-mod-proxy-html installed and I have the module enabled with a2enmod proxy. I also have my virtual host enabled. However, whenever I go to test.local I always get a cryptic 500 server error and all my logs are telling me is: [Thu Mar 03 01:43:10 2011] [warn] proxy: No protocol handler was valid for the URL /. If you are using a DSO version of mod_proxy, make sure the proxy submodules are included in the configuration using LoadModule. Here's my virtual host: <VirtualHost test.local:80> LoadModule proxy_module /usr/lib/apache2/modules/mod_proxy.so ServerAdmin webmaster@localhost ServerName test.local ProxyPreserveHost On # prevents this folder from being proxied ProxyPass /static ! DocumentRoot /var/www <Directory /> Options FollowSymLinks AllowOverride None </Directory> <Directory /var/www/> Options Indexes FollowSymLinks MultiViews AllowOverride None Order allow,deny allow from all </Directory> <Proxy *> Order allow,deny Allow from all </Proxy> ProxyPass / http://localhost:8080/ ProxyPassReverse / http://localhost:8080/ ErrorLog /var/log/apache2/error.log # Possible values include: debug, info, notice, warn, error, crit, # alert, emerg. LogLevel warn CustomLog /var/log/apache2/access.log combined and here's my settings for mod_proxy: <IfModule mod_proxy.c> #turning ProxyRequests on and allowing proxying from all may allow #spammers to use your proxy to send email. ProxyRequests Off <Proxy *> # default settings #AddDefaultCharset off #Order deny,allow #Deny from all ##Allow from .example.com AddDefaultCharset off Order allow,deny Allow from all </Proxy> # Enable/disable the handling of HTTP/1.1 "Via:" headers. # ("Full" adds the server version; "Block" removes all outgoing Via: headers) # Set to one of: Off | On | Full | Block ProxyVia On </IfModule> Does anybody know what I'm doing wrong? Thanks

    Read the article

  • VMWare-Mount not recognizing virtual disks

    - by user36175
    I have two disks as .vmdk files, and four as .vdi files. I can boot virtual machines on them with Sun xMV VirtualBox, and they work just fine. However, I want to mount them on my local computer so I can read some files off of them without starting a virtual machine. I downloaded the vmware-mount utility, but I get this error, even when mounting .vmdk files, which should be VMWare images... Unable to mount the virtual disk. The disk may be in use by a virtual machine, may not have enough volumes or mounted under another drive letter. If not, verify that the file is a valid virtual disk file. Thinking it's a problem with the utility, I downloaded the SDK and made my own simple program in C to try to mount a disk. It just initializes the API, connects to it, then attempts to open the disk. I get this error, once again claiming it is not a virtual disk: **LOG: DISKLIB-DSCPTR: descriptor above max size: I64u **LOG: DISKLIB-LINK : "f:\programming\VMs\windowstrash.vdi" : failed to open (The file specified is not a virtual disk). **LOG: DISKLIB-CHAIN : "f:\programming\VMs\windowstrash.vdi" : failed to open (The file specified is not a virtual disk). **LOG: DISKLIB-LIB : Failed to open 'f:\programming\VMs\windowstrash.vdi' with flags 0x1e (The file specified is not a virtual disk). ** FAILURE ** : The file specified is not a virtual disk The files are clearly virtual disks, though, since I can actually mount and use them with a virtual machine. I tried detaching them from any VMs and trying again, but I got the same results. Any ideas? Maybe the "descriptor above max size" is a hint? Some more info: the .vmdk disks were created on other computers. I just copied them to mine and created new VMs around them, but they work fine. All the .vdi files were created on my machine. Not sure if that affects anything. Update: WinMount can mount the file.. so the problem seems to be with vmware-mount.

    Read the article

  • SSH into Fedora 17 will not work with new users

    - by psion
    I just deployed a new Fedora 17 server on the Amazon EC2. I was able to log in as ec2-user with my generated keypair, but I cannot log in under normal circumstances as a user I created. This is just a normal ssh: ssh user@ip-address Any ideas on what is going on here? EDIT: This is a snippit from my sshd_config file # To disable tunneled clear text passwords, change to no here! PasswordAuthentication no #PermitEmptyPasswords no PasswordAuthentication no EDIT AGAIN: This is the output of ssh -v. OpenSSH_5.8p2, OpenSSL 1.0.0i-fips 19 Apr 2012 debug1: Reading configuration data /etc/ssh/ssh_config debug1: Applying options for * debug1: Connecting to 107.23.2.165 [107.23.2.165] port 22. debug1: Connection established. debug1: identity file /home/psion/.ssh/id_rsa type 1 debug1: identity file /home/psion/.ssh/id_rsa-cert type -1 debug1: identity file /home/psion/.ssh/id_dsa type 2 debug1: identity file /home/psion/.ssh/id_dsa-cert type -1 debug1: Remote protocol version 2.0, remote software version OpenSSH_5.9 debug1: match: OpenSSH_5.9 pat OpenSSH* debug1: Enabling compatibility mode for protocol 2.0 debug1: Local version string SSH-2.0-OpenSSH_5.8 debug1: SSH2_MSG_KEXINIT sent debug1: SSH2_MSG_KEXINIT received debug1: kex: server->client aes128-ctr hmac-md5 none debug1: kex: client->server aes128-ctr hmac-md5 none debug1: SSH2_MSG_KEX_DH_GEX_REQUEST(1024<1024<8192) sent debug1: expecting SSH2_MSG_KEX_DH_GEX_GROUP debug1: SSH2_MSG_KEX_DH_GEX_INIT sent debug1: expecting SSH2_MSG_KEX_DH_GEX_REPLY debug1: Server host key: RSA 19:cb:84:21:a9:0e:83:96:2f:6a:fa:7d:ce:39:0f:31 debug1: Host '107.23.2.165' is known and matches the RSA host key. debug1: Found key in /home/psion/.ssh/known_hosts:5 debug1: ssh_rsa_verify: signature correct debug1: SSH2_MSG_NEWKEYS sent debug1: expecting SSH2_MSG_NEWKEYS debug1: SSH2_MSG_NEWKEYS received debug1: Roaming not allowed by server debug1: SSH2_MSG_SERVICE_REQUEST sent debug1: SSH2_MSG_SERVICE_ACCEPT received debug1: Authentications that can continue: publickey,gssapi-keyex,gssapi-with-mic debug1: Next authentication method: gssapi-keyex debug1: No valid Key exchange context debug1: Next authentication method: gssapi-with-mic debug1: Unspecified GSS failure. Minor code may provide more information Credentials cache file '/tmp/krb5cc_1000' not found debug1: Unspecified GSS failure. Minor code may provide more information Credentials cache file '/tmp/krb5cc_1000' not found debug1: Unspecified GSS failure. Minor code may provide more information debug1: Unspecified GSS failure. Minor code may provide more information debug1: Next authentication method: publickey debug1: Offering DSA public key: /home/psion/.ssh/id_dsa debug1: Authentications that can continue: publickey,gssapi-keyex,gssapi-with-mic debug1: Offering RSA public key: /home/psion/.ssh/id_rsa debug1: Authentications that can continue: publickey,gssapi-keyex,gssapi-with-mic debug1: No more authentication methods to try. Permission denied (publickey,gssapi-keyex,gssapi-with-mic).

    Read the article

  • JavaMail application won't send email to external SMTP server

    - by Luiz Cruz
    This is actually a question from an exam, but I believe it could help others troubleshooting a similar situation. In a system, an e-mail needs to be sent to a certain mailbox. The following Java code, which is part of a larger system, was developed for that. Assume that "example.com" corresponds to a valid registered internet domain. public void sendEmail(){ String s1=”Warning”; String b1=”Contact IT support.”; String r1=”[email protected]”; String d1=”[email protected]”; String h1=”mx.intranet”; Properties p1 = new Properties(); p1.put(“mail.host”, h1); Session session = Session.getDefaultInstance(p1, null); MimeMessage message = new MimeMessage(session); try { message.setFrom(new InternetAddress(r1)); message.addRecipient(Message.RecipientType.TO, new InternetAddress(d1)); message.setSubject(s1); message.setText(b1); Transport.send(message); } catch (MessagingException e){ System.err.println(e); } } The execution of this code, within the testing environment of an application server, does NOT work as expected. The mailbox of the "example.com" server never receives the email, even tough all string values in the code are correctly attributed. The output for the command "netstat -np TCP" in the application server during execution is shown bellow: Src Add Src Port Dest Add Dest Port State 192.168.5.5 54395 192.168.7.1 25 SYN_SENT 192.168.5.5 54390 192.168.7.1 110 TIME_WAIT 192.168.5.5 52001 200.218.208.118 80 CLOSE_WAIT 192.168.5.5 52050 200.218.208.118 80 ESTABLISHED 192.168.5.5 50001 200.255.94.202 25 TIME_WAIT 192.168.5.5 50000 200.255.94.202 25 ESTABLISHED With the exception of the lines that were NAT'd, all others are associated with the Java application server, which created them after the execution of the code above. The e-mail server used in this environment is the production server, which is online and does not require any authentication for internal connections. Based on this situation, point out three possible causes for the problem.

    Read the article

  • How to reference a Domain Controller out of the Local Network?

    - by Adrian
    We have multiple servers scattered over different hosting providers. For learning, experimenting and, ultimately, production purposes, I set one of them as a Domain Controller. That went well, most of our services are now authenticating via AD, which helps us a lot. What I want to do now is to simplify the authentication for the multiple servers, by making each of them look at the Domain Controller. This way, our Devs can log into (Remote Desktop) the multiple servers with the same credentials from AD. I know I have to configure each server to look at the Domain Controller. But when I try to add the Domain Controller to the Computer, it cannot find it, although the Domain Controller address is a valid, reachable internet sub-domain (as in "ad.ourcompany.com"). This is the detailed error message: Note: This information is intended for a network administrator. If you are not your network's administrator, notify the administrator that you received this information, which has been recorded in the file C:\Windows\debug\dcdiag.txt. The following error occurred when DNS was queried for the service location (SRV) resource record used to locate an Active Directory Domain Controller for domain ad.ourcompany.com: The error was: "DNS name does not exist." (error code 0x0000232B RCODE_NAME_ERROR) The query was for the SRV record for _ldap._tcp.dc._msdcs.ad.ourcompany.com Common causes of this error include the following: - The DNS SRV records required to locate a AD DC for the domain are not registered in DNS. These records are registered with a DNS server automatically when a AD DC is added to a domain. They are updated by the AD DC at set intervals. This computer is configured to use DNS servers with the following IP addresses: 109.188.207.9 109.188.207.10 - One or more of the following zones do not include delegation to its child zone: ad.ourcompany.com ourcompany.com com . (the root zone) For information about correcting this problem, click Help. What am I missing? I'm an experienced Dev, but a newbie Sysdamin experimenting with new stuff. Disclaimer All IP addresses and domains/subdomains were changed to preserve security. If by any chance you still can see private information, please let me know so that I can change it.

    Read the article

  • Adaptec 5805 after reboot don't starting

    - by Rakedko ShotGuns
    After rebooting the system, the controller is not included. It only works if the computer is shut down and turn off. Late i update firmware "Adaptec RAID 5805 Firmware Build 18948" How to fix the problem? add Log Configuration summary Server name.....................raid_test Adaptec Storage Manager agent...7.31.00 (18856) Adaptec Storage Manager console.7.31.00 (18856) Number of controllers...........1 Operating system................Windows Configuration information for controller 1 ------------------------------------------------------- Type............................Controller Model...........................Adaptec 5805 Controller number...............1 Physical slot...................2 Installed memory size...........512 MB Serial number...................8C4510C6C9E Boot ROM........................5.2-0 (18948) Firmware........................5.2-0 (18948) Device driver...................5.2-0 (16119) Controller status...............Optimal Battery status..................Charging Battery temperature.............Normal Battery charge amount (%).......37 Estimated charge remaining......0 days, 16 hours, 12 minutes Background consistency check....Disabled Copy back.......................Disabled Controller temperature..........Normal (40C / 104F) Default logical drive task priorityHigh Performance mode................Dynamic Number of logical devices.......1 Number of hot-spare drives......0 Number of ready drives..........0 Number of drive(s) assigned to MaxCache cache0 Maximum drives allowed for MaxCache cache8 MaxCache Read Cache Pool Size...0 GB NCQ status......................Enabled Stay awake status...............Disabled Internal drive spinup limit.....0 External drive spinup limit.....0 Phy 0...........................No device attached Phy 1...........................No device attached Phy 2...........................No device attached Phy 3...........................1.50 Gb/s Phy 4...........................No device attached Phy 5...........................No device attached Phy 6...........................No device attached Phy 7...........................No device attached Statistics version..............2.0 SSD Cache size..................0 Pages on fetch list.............0 Fetch list candidates...........0 Candidate replacements..........0 69319...........................31293 Logical device..................0 Logical device name............. RAID level......................Simple volume Data space......................148,916 GB Date created....................09/19/2012 Interface type..................Serial ATA State...........................Optimal Read-cache mode.................Enabled Preferred MaxCache read cache settingEnabled Actual MaxCache read cache setting Disabled Write-cache mode................Enabled (write-back) Write-cache setting.............Enabled (write-back) Partitioned.....................Yes Protected by hot spare..........No Bootable........................Yes Bad stripes.....................No Power Status....................Disabled Power State.....................Active Reduce RPM timer................Never Power off timer.................Never Verify timer....................Never Segment 0.......................Present: controller 1, connector 0, device 0, S/N 9RX3KZMT Overall host IOs................99075 Overall MB......................4411203 DRAM cache hits.................71929 SSD cache hits..................0 Uncached IOs....................29239 Overall disk failures...........0 DRAM cache full hits............71929 DRAM cache fetch / flush wait...0 DRAM cache hybrid reads.........3476 DRAM cache flushes..............-- Read hits.......................0 Write hits......................0 Valid Pages.....................0 Updates on writes...............0 Invalidations by large writes...0 Invalidations by R/W balance....0 Invalidations by replacement....0 Invalidations by other..........0 Page Fetches....................0 0...............................0 73..............................10822 8...............................3 46138...........................4916 27184...........................15226 20875...........................323 16982...........................1771 1563............................5317 1948............................2969 Serial attached SCSI ----------------------- Type............................Disk drive Vendor..........................Unknown Model...........................ST3160815AS Serial Number...................9RX3KZMT Firmware level..................3.AAD Reported channel................0 Reported SCSI device ID.........0 Interface type..................Serial ATA Size............................149,05 GB Negotiated transfer speed.......1.50 Gb/s State...........................Optimal S.M.A.R.T. error................No Write-cache mode................Write back Hardware errors.................0 Medium errors...................0 Parity errors...................0 Link failures...................0 Aborted commands................0 S.M.A.R.T. warnings.............0 Solid-state disk (non-spinning).false MaxCache cache capable..........false MaxCache cache assigned.........false NCQ status......................Enabled Phy 0...........................1.50 Gb/s Power State.....................Full rpm Supported power states..........Full rpm, Powered off 0x01............................113 0x03............................98 0x04............................99 0x05............................100 0x07............................83 0x09............................75 0x0A............................100 0x0C............................99 0xBB............................100 0xBD............................100 0xBE............................61 0xC2............................39 0xC3............................69 0xC5............................100 0xC6............................100 0xC7............................200 0xC8............................100 0xCA............................100 Aborted commands................0 Link failures...................0 Medium errors...................0 Parity errors...................0 Hardware errors.................0 SMART errors....................0 End of the configuration information for controller 1 List item

    Read the article

  • DB2 Integrity Checks and Exception Tables

    - by imthefirestartr
    I am working on planning a migration of a DB2 8.1 database from a horrible IBM encoding to UTF-8 to support further languages etc. I am encountering an issue that I am stuck on. A few notes on this migration: We are using db2move to export and load the data and db2look to get the details fo the database (tablespaces, tables, keys etc). We found the loading process worked nicely with db2move import, however, the data takes 7 hours to load and this was unacceptable downtime when we actually complete the conversion on the main database. We are now using db2move load, which is much faster as it seems to simply throw the data in without integrity checks. Which leads to my current issue. After completing the db2move load process, several tables are in a check pending state and require integrity checks. Integrity checks are done via the following: set integrity for . immediate checked This works for most tables, however, some tables give an error: DB21034E The command was processed as an SQL statement because it was not a valid Command Line Processor command. During SQL processing it returned: SQL3603N Check data processing through the SET INTEGRITY statement has found integrity violation involving a constraint with name "blah.SQL120124110232400". SQLSTATE=23514 The internets tell me that the solution to this issue is to create an exception table based on the actual table and tell the SET INTEGRITY command to send any exceptions to that table (as below): db2 create table blah_EXCEPTION like blah db2 SET INTEGRITY FOR blah IMMEDIATE CHECKED FOR EXCEPTION IN blah USE blah_EXCEPTION NOW, here is the specific issue I am having! The above forces all the rows with issues to the specified exception table. Well that's just super, buuuuuut I can not lose data in this conversion, its simply unacceptable. The internets and IBM has a vague description of sending the violations to the exception tables and then "dealing with the data" that is in the exception table. Unfortunately, I am not clear what this means and I was hoping that some wise individual knows and could help me out and let me know how I can retrieve this data from these tables and place the data in the original/proper table rather than these exception tables. Let me know if you have any questions. Thanks!

    Read the article

< Previous Page | 203 204 205 206 207 208 209 210 211 212 213 214  | Next Page >