Search Results

Search found 30724 results on 1229 pages for 'backup solution'.

Page 208/1229 | < Previous Page | 204 205 206 207 208 209 210 211 212 213 214 215  | Next Page >

• Cisco ASA: Allowing and Denying VPN Access based on membership to an AD group

  - by milkandtang

  I have a Cisco ASA 5505 connecting to an Active Directory server for VPN authentication. Usually we'd restrict this to a particular OU, but in this case users which need access are spread across multiple OUs. So, I'd like to use a group to specify which users have remote access. I've created the group and added the users, but I'm having trouble figuring out how to deny users which aren't in that group. Right now, if someone connects they get assigned the correct group policy "companynamera" if they are in that group, so the LDAP mapping is working. However, users who are not in that group still authenticate fine, and their group policy becomes the LDAP path of their first group, i.e. CN=Domain Users,CN=Users,DC=example,DC=com, and then are still allowed access. How do I add a filter so that I can map everything that isn't "companynamera" to no access? Config I'm using (with some stuff such as ACLs and mappings removed, since they are just noise here): gateway# show run : Saved : ASA Version 8.2(1) ! hostname gateway domain-name corp.company-name.com enable password gDZcqZ.aUC9ML0jK encrypted passwd gDZcqZ.aUC9ML0jK encrypted names name 192.168.0.2 dc5 description FTP Server name 192.168.0.5 dc2 description Everything server name 192.168.0.6 dc4 description File Server name 192.168.0.7 ts1 description Light Use Terminal Server name 192.168.0.8 ts2 description Heavy Use Terminal Server name 4.4.4.82 primary-frontier name 5.5.5.26 primary-eschelon name 172.21.18.5 dmz1 description Kerio Mail Server and FTP Server name 4.4.4.84 ts-frontier name 4.4.4.85 vpn-frontier name 5.5.5.28 ts-eschelon name 5.5.5.29 vpn-eschelon name 5.5.5.27 email-eschelon name 4.4.4.83 guest-frontier name 4.4.4.86 email-frontier dns-guard ! interface Vlan1 nameif inside security-level 100 ip address 192.168.0.254 255.255.255.0 ! interface Vlan2 description Frontier FiOS nameif outside security-level 0 ip address primary-frontier 255.255.255.0 ! interface Vlan3 description Eschelon T1 nameif backup security-level 0 ip address primary-eschelon 255.255.255.248 ! interface Vlan4 nameif dmz security-level 50 ip address 172.21.18.254 255.255.255.0 ! interface Vlan5 nameif guest security-level 25 ip address 172.21.19.254 255.255.255.0 ! interface Ethernet0/0 switchport access vlan 2 ! interface Ethernet0/1 switchport access vlan 3 ! interface Ethernet0/2 switchport access vlan 4 ! interface Ethernet0/3 switchport access vlan 5 ! interface Ethernet0/4 ! interface Ethernet0/5 ! interface Ethernet0/6 ! interface Ethernet0/7 ! ftp mode passive clock timezone PST -8 clock summer-time PDT recurring dns domain-lookup inside dns server-group DefaultDNS name-server dc2 domain-name corp.company-name.com same-security-traffic permit intra-interface access-list companyname_splitTunnelAcl standard permit 192.168.0.0 255.255.255.0 access-list companyname_splitTunnelAcl standard permit 172.21.18.0 255.255.255.0 access-list inside_nat0_outbound extended permit ip any 172.21.20.0 255.255.255.0 access-list inside_nat0_outbound extended permit ip any 172.21.18.0 255.255.255.0 access-list bypassingnat_dmz extended permit ip 172.21.18.0 255.255.255.0 192.168.0.0 255.255.255.0 pager lines 24 logging enable logging buffer-size 12288 logging buffered warnings logging asdm notifications mtu inside 1500 mtu outside 1500 mtu backup 1500 mtu dmz 1500 mtu guest 1500 ip local pool VPNpool 172.21.20.50-172.21.20.59 mask 255.255.255.0 no failover icmp unreachable rate-limit 1 burst-size 1 no asdm history enable arp timeout 14400 global (outside) 1 interface global (outside) 2 email-frontier global (outside) 3 guest-frontier global (backup) 1 interface global (dmz) 1 interface nat (inside) 0 access-list inside_nat0_outbound nat (inside) 2 dc5 255.255.255.255 nat (inside) 1 192.168.0.0 255.255.255.0 nat (dmz) 0 access-list bypassingnat_dmz nat (dmz) 2 dmz1 255.255.255.255 nat (dmz) 1 172.21.18.0 255.255.255.0 access-group outside_access_in in interface outside access-group dmz_access_in in interface dmz route outside 0.0.0.0 0.0.0.0 4.4.4.1 1 track 1 route backup 0.0.0.0 0.0.0.0 5.5.5.25 254 timeout xlate 3:00:00 timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02 timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00 timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00 timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute timeout tcp-proxy-reassembly 0:01:00 ldap attribute-map RemoteAccessMap map-name memberOf IETF-Radius-Class map-value memberOf CN=RemoteAccess,CN=Users,DC=corp,DC=company-name,DC=com companynamera dynamic-access-policy-record DfltAccessPolicy aaa-server ActiveDirectory protocol ldap aaa-server ActiveDirectory (inside) host dc2 ldap-base-dn dc=corp,dc=company-name,dc=com ldap-scope subtree ldap-login-password * ldap-login-dn cn=administrator,ou=Admins,dc=corp,dc=company-name,dc=com server-type microsoft aaa-server ADRemoteAccess protocol ldap aaa-server ADRemoteAccess (inside) host dc2 ldap-base-dn dc=corp,dc=company-name,dc=com ldap-scope subtree ldap-login-password * ldap-login-dn cn=administrator,ou=Admins,dc=corp,dc=company-name,dc=com server-type microsoft ldap-attribute-map RemoteAccessMap aaa authentication enable console LOCAL aaa authentication ssh console LOCAL http server enable http 192.168.0.0 255.255.255.0 inside no snmp-server location no snmp-server contact snmp-server enable traps snmp authentication linkup linkdown coldstart sla monitor 123 type echo protocol ipIcmpEcho 4.4.4.1 interface outside num-packets 3 frequency 10 sla monitor schedule 123 life forever start-time now crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac crypto ipsec security-association lifetime seconds 28800 crypto ipsec security-association lifetime kilobytes 4608000 crypto dynamic-map outside_dyn_map 20 set pfs crypto dynamic-map outside_dyn_map 20 set transform-set ESP-3DES-SHA crypto map outside_map 65535 ipsec-isakmp dynamic outside_dyn_map crypto map outside_map interface outside crypto isakmp enable outside crypto isakmp policy 10 authentication pre-share encryption 3des hash sha group 2 lifetime 86400 ! track 1 rtr 123 reachability telnet timeout 5 ssh 192.168.0.0 255.255.255.0 inside ssh timeout 5 ssh version 2 console timeout 0 management-access inside dhcpd auto_config outside ! threat-detection basic-threat threat-detection statistics access-list no threat-detection statistics tcp-intercept webvpn group-policy companynamera internal group-policy companynamera attributes wins-server value 192.168.0.5 dns-server value 192.168.0.5 vpn-tunnel-protocol IPSec password-storage enable split-tunnel-policy tunnelspecified split-tunnel-network-list value companyname_splitTunnelAcl default-domain value corp.company-name.com split-dns value corp.company-name.com group-policy companyname internal group-policy companyname attributes wins-server value 192.168.0.5 dns-server value 192.168.0.5 vpn-tunnel-protocol IPSec password-storage enable split-tunnel-policy tunnelspecified split-tunnel-network-list value companyname_splitTunnelAcl default-domain value corp.company-name.com split-dns value corp.company-name.com username admin password IhpSqtN210ZsNaH. encrypted privilege 15 tunnel-group companyname type remote-access tunnel-group companyname general-attributes address-pool VPNpool authentication-server-group ActiveDirectory LOCAL default-group-policy companyname tunnel-group companyname ipsec-attributes pre-shared-key * tunnel-group companynamera type remote-access tunnel-group companynamera general-attributes address-pool VPNpool authentication-server-group ADRemoteAccess LOCAL default-group-policy companynamera tunnel-group companynamera ipsec-attributes pre-shared-key * ! class-map type inspect ftp match-all ftp-inspection-map class-map inspection_default match default-inspection-traffic ! ! policy-map type inspect ftp ftp-inspection-map parameters class ftp-inspection-map policy-map type inspect dns migrated_dns_map_1 parameters message-length maximum 512 policy-map global_policy class inspection_default inspect dns migrated_dns_map_1 inspect ftp inspect h323 h225 inspect h323 ras inspect http inspect ils inspect netbios inspect rsh inspect rtsp inspect skinny inspect sqlnet inspect sunrpc inspect tftp inspect sip inspect xdmcp inspect icmp inspect icmp error inspect esmtp inspect pptp ! service-policy global_policy global prompt hostname context Cryptochecksum:487525494a81c8176046fec475d17efe : end gateway# Thanks so much!

  Read the article

• Changing the Column order/adding Newcolumn for existing Table in SQLServer2008

  - by rmdussa

  Hi I have situation where I need to change the order of the columns/adding new columns for existing Table in SQLServer2008, It is not allowing me to do without drop and recreate. But That is in production system and having data in that table. I can take backup of the data, and Drop the existing table and change the order/add new columns and recreate it, insert the backup data into new Table. Is there any best way to do this without dropping and recreating.I think SQLServer 2005 will allow this process without dropping and recreating while changing to existing table structure. Thanks

  Read the article

• SQL Server 2005 script with join across Database Servers

  - by Robin Day

  I have the following script which I use to give me a simple "diff" between tables on two different databases. (Note: In reality my comparison is on a lot more than just an ID) SELECT MyTableA.MyId, MyTableB.MyId FROM MyDataBaseA..MyTable MyTableA FULL OUTER JOIN MyDataBaseB..MyTable MyTableB ON MyTableA.MyId = MyTableB.MyId WHERE MyTableA.MyId IS NULL OR MyTableB.MyId IS NULL I now need to run this script on two databases that exist on different servers. At the moment my solution is to backup the database from one server, restore it to the other and then run the script. I'm pretty sure this is possible, however, is this likely to be a can of worms? This is a very rare task I need to perform and if it involves a large number of DB setting changes then I will probably stick to my backup method.

  Read the article

• Backing Up Transaction Logs to Tape?

  - by David Stein

  I'm about to put my database in Full Recovery Model and start taking transaction log backups. I am taking a full nightly backup to another server and later in the evening this file and many others are backed up to tape. My question is this. I will take hourly (or more if necessary) t-log backups and store them on the other server as well. However, if my full backups are passing DBCC and integrity checks, do I need to put my T-Logs on tape? If someone wants point in time recovery to yesterday at 2pm, I would need the previous full backup and the transaction logs. However, other than that case, if I know my full back ups are good, is there value in keeping the previous day's transaction log backups?

  Read the article

• Wordpress - related posts by custom taxonomy problem

  - by Nordin

  Hello, I'm trying to display related posts based on a custum taxonomy. I found a query at wordpress.org that kind of works. However the original post gets duplicated in the results multiple times. (words is the name of the custom taxonomy I use) What seems to happen is that the single post gets duplicated according to what amount showpost is set. Any idea's what could cause this? The code: <?php //for in the loop, display all "content", regardless of post_type, //that have the same custom taxonomy (e.g. words) terms as the current post $backup = $post; // backup the current object $found_none = '<h2>No related posts found!</h2>'; $taxonomy = 'words';// e.g. post_tag, category, custom taxonomy $param_type = 'words'; // e.g. tag__in, category__in, but genre__in will NOT work $post_types = get_post_types( array('public' => true), 'names' ); $tax_args=array('orderby' => 'none'); $tags = wp_get_post_terms( $post->ID , $taxonomy, $tax_args); if ($tags) { foreach ($tags as $tag) { $args=array( "$param_type" => $tag->slug, 'post__not_in' => array($post->ID), 'post_type' => $post_types, 'showposts'=>5, 'caller_get_posts'=>1 ); $my_query = null; $my_query = new WP_Query($args); if( $my_query->have_posts() ) { while ($my_query->have_posts()) : $my_query->the_post(); ?> <h3><a href="<?php the_permalink() ?>" rel="bookmark" title="<?php the_title(); ?>"><?php the_title(); ?></a></h3> <?php $found_none = ''; endwhile; } } } if ($found_none) { echo $found_none; } $post = $backup; // copy it back wp_reset_query(); // to use the original query again ?>

  Read the article

• Mirror a git repository by pulling?

  - by corydoras

  I am wondering if there is an easy way, ie like a simple cron job, to regularly pull from a remote git repository to a local read only mirror for backup purposes? Ideally it would pull all branches and tags, but the master/trunk/head would be sufficient. I just need a way to make sure that if the master git server dies, we have a backup location that we could manually fail over to. (I have been googling and reading documentation for help on how to do this for quite some time now and the furthest I have gotten is a bash script that does pull's on a regular interval.)

  Read the article

• how to restore database back up

  - by user350104

  I have MySQL database backup file (Mysql version 5.1) and i want to restore it in Sqlserver 2008 how do i restore it?

  Read the article

• Restoring multiple database backups in a transaction

  - by Raghu Dodda

  I wrote a stored procedure that restores as set of the database backups. It takes two parameters - a source directory and a restore directory. The procedure looks for all .bak files in the source directory (recursively) and restores all the databases. The stored procedure works as expected, but it has one issue - if I uncomment the try-catch statements, the procedure terminates with the following error: error_number = 3013 error_severity = 16 error_state = 1 error_message = DATABASE is terminating abnormally. The weird part is sometimes (it is not consistent) the restore is done even if the error occurs. The procedure: create proc usp_restore_databases ( @source_directory varchar(1000), @restore_directory varchar(1000) ) as begin declare @number_of_backup_files int -- begin transaction -- begin try -- step 0: Initial validation if(right(@source_directory, 1) <> '\') set @source_directory = @source_directory + '\' if(right(@restore_directory, 1) <> '\') set @restore_directory = @restore_directory + '\' -- step 1: Put all the backup files in the specified directory in a table -- declare @backup_files table ( file_path varchar(1000)) declare @dos_command varchar(1000) set @dos_command = 'dir ' + '"' + @source_directory + '*.bak" /s/b' /* DEBUG */ print @dos_command insert into @backup_files(file_path) exec xp_cmdshell @dos_command delete from @backup_files where file_path IS NULL select @number_of_backup_files = count(1) from @backup_files /* DEBUG */ select * from @backup_files /* DEBUG */ print @number_of_backup_files -- step 2: restore each backup file -- declare backup_file_cursor cursor for select file_path from @backup_files open backup_file_cursor declare @index int; set @index = 0 while(@index < @number_of_backup_files) begin declare @backup_file_path varchar(1000) fetch next from backup_file_cursor into @backup_file_path /* DEBUG */ print @backup_file_path -- step 2a: parse the full backup file name to get the DB file name. declare @db_name varchar(100) set @db_name = right(@backup_file_path, charindex('\', reverse(@backup_file_path)) -1) -- still has the .bak extension /* DEBUG */ print @db_name set @db_name = left(@db_name, charindex('.', @db_name) -1) /* DEBUG */ print @db_name set @db_name = lower(@db_name) /* DEBUG */ print @db_name -- step 2b: find out the logical names of the mdf and ldf files declare @mdf_logical_name varchar(100), @ldf_logical_name varchar(100) declare @backup_file_contents table ( LogicalName nvarchar(128), PhysicalName nvarchar(260), [Type] char(1), FileGroupName nvarchar(128), [Size] numeric(20,0), [MaxSize] numeric(20,0), FileID bigint, CreateLSN numeric(25,0), DropLSN numeric(25,0) NULL, UniqueID uniqueidentifier, ReadOnlyLSN numeric(25,0) NULL, ReadWriteLSN numeric(25,0) NULL, BackupSizeInBytes bigint, SourceBlockSize int, FileGroupID int, LogGroupGUID uniqueidentifier NULL, DifferentialBaseLSN numeric(25,0) NULL, DifferentialBaseGUID uniqueidentifier, IsReadOnly bit, IsPresent bit ) insert into @backup_file_contents exec ('restore filelistonly from disk=' + '''' + @backup_file_path + '''') select @mdf_logical_name = LogicalName from @backup_file_contents where [Type] = 'D' select @ldf_logical_name = LogicalName from @backup_file_contents where [Type] = 'L' /* DEBUG */ print @mdf_logical_name + ', ' + @ldf_logical_name -- step 2c: restore declare @mdf_file_name varchar(1000), @ldf_file_name varchar(1000) set @mdf_file_name = @restore_directory + @db_name + '.mdf' set @ldf_file_name = @restore_directory + @db_name + '.ldf' /* DEBUG */ print 'mdf_logical_name = ' + @mdf_logical_name + '|' + 'ldf_logical_name = ' + @ldf_logical_name + '|' + 'db_name = ' + @db_name + '|' + 'backup_file_path = ' + @backup_file_path + '|' + 'restore_directory = ' + @restore_directory + '|' + 'mdf_file_name = ' + @mdf_file_name + '|' + 'ldf_file_name = ' + @ldf_file_name restore database @db_name from disk = @backup_file_path with move @mdf_logical_name to @mdf_file_name, move @ldf_logical_name to @ldf_file_name -- step 2d: iterate set @index = @index + 1 end close backup_file_cursor deallocate backup_file_cursor -- end try -- begin catch -- print error_message() -- rollback transaction -- return -- end catch -- -- commit transaction end Does anybody have any ideas why this might be happening? Another question: is the transaction code useful ? i.e., if there are 2 databases to be restored, will SQL Server undo the restore of one database if the second restore fails?

  Read the article

• Why is scp not overwriting my destination file?

  - by Noli

  I'm trying to back up a file via the command scp /tmp/backup.tar.gz hostname:/home/user/backup.tar.gz When I run it, the scp progress bar shows up and it looks like its transferring the file, however when I log into the destination server to check the file, the timestamp and filesize haven't changed from the older version, so it looks like scp didn't overwrite the old file at all. It only sees to work when I manually delete the file from the destination server. I'm running ubuntu, and this is happening on two servers: one cygwin ssh, and one fedora core 3. Anyone have any idea why this is happening? I thought scp would ONLY overwrite existing files.. Thanks

  Read the article

• Get python tarfile to skip files without read permission

  - by chris

  I'm trying to write a function that backs up a directory with files of different permission to an archive on Windows XP. I'm using the tarfile module to tar the directory. Currently as soon as the program encounters a file that does not have read permissions, it stops giving the error: IOError: [Errno 13] Permission denied: 'path to file'. I would like it to instead just skip over the files it cannot read rather than end the tar operation. This is the code I am using now: def compressTar(): """Build and gzip the tar archive.""" folder = 'C:\\Documents and Settings' tar = tarfile.open ("C:\\WINDOWS\\Program\\archive.tar.gz", "w:gz") try: print "Attempting to build a backup archive" tar.add(folder) except: print "Permission denied attempting to create a backup archive" print "Building a limited archive conatining files with read permissions." for root, dirs, files in os.walk(folder): for f in files: tar.add(os.path.join(root, f)) for d in dirs: tar.add(os.path.join(root, d))

  Read the article

• Recovering transaction log from corrupt SQL database

  - by Don Kirkham

  We have a database that is backed up weekly in simple mode. Yesterday, we had a crc error corrupt the mdf file and we were unable to save it. I restored the backup from last week, but now we have a gap from the time of the backup to the time of the restore. Since I have the ldf file from that database, is there any way to "replay" that transaction log to fill in the gap? I have tried reattaching the ldf file to the recovered mdf file, but SQL will not allow me to do that. (It just creates a new ldf file with a different name when I reattach the database.) Any ideas would help. This is a lot of data to lose and although it is not critical data, I'd like to get it back (as well as learn as well as learn how to do it.)

  Read the article

• getting data problem with MYSQL under linux

  - by aelshereay

  Hi all, Recently I started to use Linux (Ubuntu 9.10) instead of windows. I am working on a java web application with Spring, MYSQL with jpa. However, before to install linux I made a backup file from the database, then installed linux, installed the MYSQL Query Browser and Administrator tools, and using the Admin tool restored the backup file, then got all the tables and made a simple select statement from one of the tables and got result normally and everything seems to work just fine. There a USER table, and there's a namedQuery defined to get a user by userName, the problem is that when I pass a correct userName I still get nothing! I really don't know what is the problem! The application was working perfectly under windows! Please, can anyone help me to solve this problem? Thank you in advance.

  Read the article

• tomcat 6 - Cluster / BackupManager

  - by Kevin

  Hi, I have a question regarding Clustering (session replication/failover) in tomcat 6 using BackupManager. Reason I chose BackupManager, is because it replicates the session to only one other server. I am going to run through the example below to try and explain my question. I have 6 nodes setup in a tomcat 6 cluster with BackupManager. The front end is one Apache server using mod_jk with sticky session enabled Each node has 1 session each. node1 has a session from client1 node2 has a session from client2 .. .. Now lets say node1 goes down ; assuming node2 is the backup, node2 now has two sessions (for client2 and client1) The next time client1 makes a request, what exactly happens ? Does Apache "know" that node1 is down and does it send the request directly to node2 ? =OR= does it try each of the 6 instances and find out the hard way who the backup is ?

  Read the article

• SQL Server 2008 replication failing with: process could not execute 'sp_replcmds'

  - by skb

  I have an issue with SQL replication that I am having trouble fixing. What I am doing is restoring two DBs from a production backup, and then installing replication between them. The replication seems to be configured without any errors, but when I look at the status I see error messages like this: I have an issue with SQL replication that I am having trouble fixing. What I am doing is restoring two DBs from a production backup, and then installing replication between them. The replication seems to be configured without any errors, but when I look at the status in Replication Monitor I see error messages like this: Error messages: The process could not execute 'sp_replcmds' on 'MYSERVER1'. Get help: http://help/MSSQL_REPL20011 Cannot execute as the database principal because the principal "dbo" does not exist, this type of principal cannot be impersonated, or you do not have permission. (Source: MSSQLServer, Error number: 15517) Get help: http://help/15517 The process could not execute 'sp_replcmds' on 'MYSERVER1'. Get help: http://help/MSSQL_REPL22037 What does this mean?

  Read the article

• Find folder name based on string value with batch

  - by MaQleod

  I need to return a full directory name from inside a specified directory that contains .default in the folder name. Basically I'm adding a line in a backup script to backup firefox bookmarks, but the profile name is going to be different on every machine and I need a way to find the folder the bookmarks.html file resides without knowing the firefox profile name I've looked at FIND and FINDSTR but neither seem to be what I need. I also looked at this post: http://stackoverflow.com/questions/2252785/windows-batch-file-get-folders-path-and-store-them-in-variable It was closer to what I'm looking for, but I just need a folder name, and to use something like regexp to find it Any suggestions on commands to look at or strategies to use?

  Read the article

• Run a SQL Script Against MySQL using Powershell

  - by abarr

  I have a Powershell script that backs up my MySQL DB's each night using mysqldump. This all works fine but I would like to extend the script to update a reporting db (db1) from the backup of the prod db (db2). I have written the following test script but it does not work. I have a feeling the problem is the reading of the sql file to the CommandText but I am not sure how to debug. [system.reflection.assembly]::LoadWithPartialName("MySql.Data") $mysql_server = "localhost" $mysql_user = "root" $mysql_password = "password" write-host "Create coonection to db1" # Connect to MySQL database 'db1' $cn = New-Object -TypeName MySql.Data.MySqlClient.MySqlConnection $cn.ConnectionString = "SERVER=$mysql_server;DATABASE=db1;UID=$mysql_user;PWD=$mysql_password" $cn.Open() write-host "Running backup script against db1" # Run Update Script MySQL $cm = New-Object -TypeName MySql.Data.MySqlClient.MySqlCommand $sql = Get-Content C:\db2.sql $cm.Connection = $cn $cm.CommandText = $sql $cm.ExecuteReader() write-host "Closing Connection" $cn.Close() Any assistance would be appreciated. Thanks.

  Read the article

• Restoring using SyncBack without profiles

  - by Thomas Matthews

  I backed up my internal hard drive (C:) using SyncBack onto an external (USB) hard drive with maximum compression. I then performed a clean install of Windows Vista onto the computer. I forgot to copy the SyncBack logs before the clean install. And now when ever I try to restore a directory, the RAR/ZIP files are copied to the system hard drive instead of extracting their contents to the hard drive. Also, SyncBack is not traversing the folders during the Restore process. How can I tell SyncBack to expand the compressed files? I am running the freeware version of SyncBack. I have to create new log files (unless SyncBack put them somewhere on the external drive). My alternative is to write a program that traverses the folders on the external drive and extracts files from the RAR/ZIP files. I am using Windows Vista, Service Pack 2, and the data size prior to backup was about 200 GB. (The backup process took over 72 hours due to "hiccups").

  Read the article

• SQL Script to clear database tables.

  - by pencilslate

  I have a need to take backup of a SQL Server Db with tons of data in it and import into another environment for updating and testing. Since, i am not interested in the data, i just want to recreate the schema on my other server. There is an option called 'Generate Script', but is throwing errors running them on the target server. Curious, if anyone attempted to write a SQL script that would run through all the tables in the db and clear the rows, thereby i could just create the schema backup as .bak file and restore it into another server.

  Read the article

• How to run a program in python?

  - by Luka Mihaldinec

  this is my code. I'm trying to make a script which would run an .exe file from my computer. And this one isn't working :/ I think I'm using the wrong command.. I tried all the other commands like import os, os.startfile, but they won't work too. I think my code is just wrong :P loop=0 while loop==0: answer=raw_input("coded by: Narralol\n\n" "Pick a task:\n" "1) Start Minecraft.exe\n" "2) Start Minecraft_Server.jar\n" "3) Backup your server\n" "4) Copy the backup to your desktop\n" "5) Exit\n") if answer==1: execfile('D:\Games\Minecraft\Minecraft.exe') elif answer==2: execfile('D:\Games\Minecraft\Minecraft_server.jar') elif answer==5: loop=1

  Read the article

• problem in reading output of dd command using pipe

  - by Ummar

  I am developing an application, in which I want to redirect the output (progress information) of dd command to my C++ program, but it is not actually getting the output, here is the code FILE * progressInfo = popen("gzip -dc backup/backup.img.gz | pv -ptrbe -i 2 -s 2339876653 | dd of=/dev/sdb","r"); if(!progressInfo) { return -1; } char buf[1024]; while(fgets(buff, sizeof(buff),progressInfo)!=NULL) { std::cout << buff << endl; } but the problem is the progress information is not received in buff, and the output is continuously printed on terminal, and above program halts on while(fgets(buff, sizeof(buff),progressInfo)!=NULL), and as soon as the dd operation is completed, the very next line to loop block is executed. if anyone has any idea why the output is not returned to buff, and its continuously retuned on terminal?

  Read the article

• Shell script to count files, then remove oldest files

  - by Nic Hubbard

  I am new to shell scripting, so I need some help here. I have a directory that fills up with backups. If I have more than 10 backup files, I would like to remove the oldest files, so that the 10 newest backup files are the only ones that are left. So far, I know how to count the files, which seems easy enough, but how do I then remove the oldest files, if the count is over 10? if [ls /backups | wc -l > 10] then echo "More than 10" fi

  Read the article

• User authorization in DB2

  - by Daziplqa

  Hi Folks, I am using win Vista, and I am trying to backup some Database under DB2. I am logged in using the Administrator user, and whenever I try to issue the backup command in the "command line processor", I get the following message: SQL1092N "ADMINISTRATOR" does not have the authority to perform the requested command. SQLSTATE=00000 BTW, I have created a username/password pair (db2admin) while installing the DB2 server. So, Will this problem will be get solved if I use the db2admin user? And how to connect to the server (local server BTW) using the db2admin user ?

  Read the article

• Associate specific file extensions with my delphi app - any library for this?

  - by michal

  Hi, so far if I had to associate the file extension with my application I used to simply modify the registry. However I haven't been doing it for years, and I'm afraid the things might have changed a bit. I have no idea how to prevent registry access restrictions in Windows 7 / Vista (if there are any for HKEY_CLASSES_ROOT). Thus I'm looking for some delphi library, unit, code snippet or whatever which works reliably under XP, Vista and 7. Is there any which handles "backup" as well? By backup I mean possibility to revert the changes to the previous association ... Thanks in advance, m.

  Read the article

• How can I use "IF statements" in a postgres trigger

  - by Dan B

  I have a trigger function that I only want to fire on certain instances of INSERTS, in this case, if do_backup = true. If it fires in all instances, I get an infinite loop. The logic seems pretty simple to me, and the rest of the function works. But the trigger function does not seem to register my conditional and always runs, even when backup = true. CREATE OR REPLACE FUNCTION table_styles_backup() RETURNS TRIGGER AS $table_styles_backup$ DECLARE ... do_backup boolean; BEGIN SELECT backup INTO do_backup FROM table_details WHERE id=NEW.table_meta_id; IF (do_backup = true) THEN ... INSERT INTO table_styles_versions ( ... ) VALUES ( ... ); END IF; RETURN NULL; END; $table_styles_backup$ LANGUAGE plpgsql; CREATE TRIGGER table_styles_backup AFTER INSERT ON table_styles FOR EACH ROW EXECUTE PROCEDURE table_styles_backup();

  Read the article

• Shell script syntax error: unexpected end of line

  - by user1557674

  I wrote a simple shell script to check for the existence of a xml file and if it exists, then rename an old xml file to be backup and then move the new xml file to where the old xml file was stored. #!/bin/sh oldFile="/Documents/sampleFolder/sampleFile.xml" newFile="/Documents/sampleFile.xml" backupFileName="/Documents/sampleFolder/sampleFile2.backup" oldFileLocation="/Documents/sampleFolder" if [ -f "$newFile" ] ; then echo "File found" #Rename old file mv $oldFile $backupFileName #move new file to old file's location mv $newFile $oldFileLocation else echo "File not found, do nothing" fi However, every time I try to run the script, I get 4 command not found messages and a syntax error: unexpected end of file. Any suggestions on why I get these command not found errors or the unexpected end of file? I double checked that I closed all my double quotes, I have code highlight :) EDIT: output from running script: : command not found: : command not found: : command not found1: : command not found6: replaceXML.sh: line 26: syntax error: unexpected end of file

  Read the article

< Previous Page | 204 205 206 207 208 209 210 211 212 213 214 215  | Next Page >