Search Results

Search found 10527 results on 422 pages for 'ccnet config'.

Page 208/422 | < Previous Page | 204 205 206 207 208 209 210 211 212 213 214 215  | Next Page >

• proftpd, dynamic IP, and filezilla: port troubles

  - by Yami

  The basic setup: Two computers, one running proftpd, one attempting to connect via filezilla. Both linux (xubuntu on the server, kubuntu on the client). Both are at the moment behind a router on a residential (read: dynamic IP) connection; the client is a laptop I plan to take away from the home network, so I'll need this to work externally. I have my router set up to allow specific ports forwarded to each machine and, where possible, have plugged in those numbers into proftpd (via gadmin, double-checking the config file) and filezilla. Attempting to connect via active mode using the internal IP works: Status: Connecting to 192.168.1.139:8085... Status: Connection established, waiting for welcome message... Response: 220 Crossroads FTP Command: USER <redacted> Response: 331 Password required for <redacted> Command: PASS ******* Response: 230 Anonymous access granted, restrictions apply Command: OPTS UTF8 ON Response: 200 UTF8 set to on Status: Connected Status: Retrieving directory listing... Command: PWD Response: 257 "/" is the current directory Command: TYPE I Response: 200 Type set to I Command: PORT 192,168,1,52,153,140 Response: 200 PORT command successful Command: LIST Response: 150 Opening ASCII mode data connection for file list Response: 226 Transfer complete Status: Directory listing successful Attempting to connect via the domain name, however, leads to issues; in active mode, the PORT is the last command to be received according to the server's logs, and in passive mode, it's the PASV command. This leads me to believe I'm being redirected to a bad port? Active Sample: Status: Resolving address of <url> Status: Connecting to <ip:port> Status: Connection established, waiting for welcome message... Response: 220 Crossroads FTP Command: USER <redacted> Response: 331 Password required for <redacted> Command: PASS ******* Response: 230 Anonymous access granted, restrictions apply Command: OPTS UTF8 ON Response: 200 UTF8 set to on Status: Connected Status: Retrieving directory listing... Command: PWD Response: 257 "/" is the current directory Command: TYPE I Response: 200 Type set to I Command: PORT 174,111,127,27,153,139 Response: 200 PORT command successful Command: LIST Error: Connection timed out Error: Failed to retrieve directory listing Passive sample: Status: Resolving address of ftp.bonsaiwebdesigns.com Status: Connecting to 174.111.127.27:8085... Status: Connection established, waiting for welcome message... Response: 220 Crossroads FTP Command: USER yamikuronue Response: 331 Password required for yamikuronue Command: PASS ******* Response: 230 Anonymous access granted, restrictions apply Command: OPTS UTF8 ON Response: 200 UTF8 set to on Status: Connected Status: Retrieving directory listing... Command: PWD Response: 257 "/" is the current directory Command: TYPE I Response: 200 Type set to I Command: PASV Response: 227 Entering Passive Mode (64,95,64,197,101,88). Command: LIST Error: Connection timed out Error: Failed to retrieve directory listing In both cases, the log file ends at "PORT" or "PASV" - there's no record of ever receiving a "LIST" command. Just above that I can see the attempt to connect actively via the internal IP, which does indeed include a LIST command. My config file includes "PassivePorts 20001-26999", which are the port forwards I set up for the ftp server, and "Port 8085", which is also forwarded to the same machine. I also have a MasqueradeAddress set up to prevent it from reporting its internal IP, which was an earlier issue I had. I think what I'm asking is, is there another setting someplace I have to change to get this setup to work?

  Read the article

• High Load mysql on Debian server

  - by Oleg Abrazhaev

  I have Debian server with 32 gb memory. And there is apache2, memcached and nginx on this server. Memory load always on maximum. Only 500m free. Most memory leak do MySql. Apache only 70 clients configured, other services small memory usage. When mysql use all memory it stops. And nothing works, need mysql reboot. Mysql configured use maximum 24 gb memory. I have hight weight InnoDB bases. (400000 rows, 30 gb). And on server multithread daemon, that makes many inserts in this tables, thats why InnoDB. There is my mysql config. [mysqld] # # * Basic Settings # default-time-zone = "+04:00" user = mysql pid-file = /var/run/mysqld/mysqld.pid socket = /var/run/mysqld/mysqld.sock port = 3306 basedir = /usr datadir = /var/lib/mysql tmpdir = /tmp language = /usr/share/mysql/english skip-external-locking default-time-zone='Europe/Moscow' # # Instead of skip-networking the default is now to listen only on # localhost which is more compatible and is not less secure. # # * Fine Tuning # #low_priority_updates = 1 concurrent_insert = ALWAYS wait_timeout = 600 interactive_timeout = 600 #normal key_buffer_size = 2024M #key_buffer_size = 1512M #70% hot cache key_cache_division_limit= 70 #16-32 max_allowed_packet = 32M #1-16M thread_stack = 8M #40-50 thread_cache_size = 50 #orderby groupby sort sort_buffer_size = 64M #same myisam_sort_buffer_size = 400M #temp table creates when group_by tmp_table_size = 3000M #tables in memory max_heap_table_size = 3000M #on disk open_files_limit = 10000 table_cache = 10000 join_buffer_size = 5M # This replaces the startup script and checks MyISAM tables if needed # the first time they are touched myisam-recover = BACKUP #myisam_use_mmap = 1 max_connections = 200 thread_concurrency = 8 # # * Query Cache Configuration # #more ignored query_cache_limit = 50M query_cache_size = 210M #on query cache query_cache_type = 1 # # * Logging and Replication # # Both location gets rotated by the cronjob. # Be aware that this log type is a performance killer. #log = /var/log/mysql/mysql.log # # Error logging goes to syslog. This is a Debian improvement :) # # Here you can see queries with especially long duration log_slow_queries = /var/log/mysql/mysql-slow.log long_query_time = 1 log-queries-not-using-indexes # # The following can be used as easy to replay backup logs or for replication. # note: if you are setting up a replication slave, see README.Debian about # other settings you may need to change. #server-id = 1 #log_bin = /var/log/mysql/mysql-bin.log server-id = 1 log-bin = /var/lib/mysql/mysql-bin #replicate-do-db = gate log-bin-index = /var/lib/mysql/mysql-bin.index log-error = /var/lib/mysql/mysql-bin.err relay-log = /var/lib/mysql/relay-bin relay-log-info-file = /var/lib/mysql/relay-bin.info relay-log-index = /var/lib/mysql/relay-bin.index binlog_do_db = 24avia expire_logs_days = 10 max_binlog_size = 100M read_buffer_size = 4024288 innodb_buffer_pool_size = 5000M innodb_flush_log_at_trx_commit = 2 innodb_thread_concurrency = 8 table_definition_cache = 2000 group_concat_max_len = 16M #binlog_do_db = gate #binlog_ignore_db = include_database_name # # * BerkeleyDB # # Using BerkeleyDB is now discouraged as its support will cease in 5.1.12. #skip-bdb # # * InnoDB # # InnoDB is enabled by default with a 10MB datafile in /var/lib/mysql/. # Read the manual for more InnoDB related options. There are many! # You might want to disable InnoDB to shrink the mysqld process by circa 100MB. #skip-innodb # # * Security Features # # Read the manual, too, if you want chroot! # chroot = /var/lib/mysql/ # # For generating SSL certificates I recommend the OpenSSL GUI "tinyca". # # ssl-ca=/etc/mysql/cacert.pem # ssl-cert=/etc/mysql/server-cert.pem # ssl-key=/etc/mysql/server-key.pem [mysqldump] quick quote-names max_allowed_packet = 500M [mysql] #no-auto-rehash # faster start of mysql but no tab completition [isamchk] key_buffer = 32M key_buffer_size = 512M # # * NDB Cluster # # See /usr/share/doc/mysql-server-*/README.Debian for more information. # # The following configuration is read by the NDB Data Nodes (ndbd processes) # not from the NDB Management Nodes (ndb_mgmd processes). # # [MYSQL_CLUSTER] # ndb-connectstring=127.0.0.1 # # * IMPORTANT: Additional settings that can override those from this file! # The files must end with '.cnf', otherwise they'll be ignored. # !includedir /etc/mysql/conf.d/ Please, help me make it stable. Memory used /etc/mysql # free total used free shared buffers cached Mem: 32930800 32766424 164376 0 139208 23829196 -/+ buffers/cache: 8798020 24132780 Swap: 33553328 44660 33508668 Maybe my problem not in memory, but MySQL stops every day. As you can see, cache memory free 24 gb. Thank to Michael Hampton? for correction. Load overage on server 3.5. Maybe hdd or another problem? Maybe my config not optimal for 30gb InnoDB ?

  Read the article

• Riak "error":"insufficient_vnodes_available"

  - by Wolfiem

  We have 4 nodes Riak installation. They are running on Ubuntu 12.04 LTS Precise installed servers. We have installed 1.1.4 at August 1st 2012 and upgraded 1.2.0 when its available. Server names are: f1 - 10.10.0.12 - This is the first installed server. We have joined other ones to this server. This also serves Riak control. s2 - 10.10.0.22 - s3 - 10.10.0.23 - s4 - 10.10.0.24 - This server also serves Riak control. This morning we've seen "insufficient nodes available" error at our applications log and restarted all nodes. 3 of them became available except "f1" UPDATE : while I prepare this message live 3 nodes became unavailable and need restart Riak. wolfiem@f01:~$ sudo /etc/init.d/riak start Riak failed to start within 15 seconds, see the output of 'riak console' for more information. If you want to wait longer, set the environment variable WAIT_FOR_ERLANG to the number of seconds to wait. I've tried to set WAIT_FOR_ERLANG value to 60 seconds but I can't. adding this line in vm.args didn't work: -env WAIT_FOR_ERLANG 60 I also tried to set this from terminal but it didn't work either. wolfiem@f01:~$ export WAIT_FOR_ERLANG=60 It still says "Riak failed to start within 15 seconds" This is the console.log output: 2012-09-11 10:58:02.532 [info] <0.7.0> Application lager started on node '[email protected]' 2012-09-11 10:58:02.560 [warning] <0.148.0>@riak_core_ring_manager:reload_ring:231 No ring file available. 2012-09-11 10:58:02.585 [error] <0.164.0> CRASH REPORT Process <0.164.0> with 0 neighbours exited with reason: eaddrnotavail in gen_server:init_it/6 line 320 This is the error.log output 2012-09-11 10:58:02.585 [error] <0.164.0> CRASH REPORT Process <0.164.0> with 0 neighbours exited with reason: eaddrnotavail in gen_server:init_it/6 line 320 This is the crash.log output: 2012-09-11 10:58:02 =CRASH REPORT==== crasher: initial call: mochiweb_socket_server:init/1 pid: <0.164.0> registered_name: [] exception exit: {eaddrnotavail,[{gen_server,init_it,6,[{file,"gen_server.erl"},{line,320}]},{proc_lib,init_p_do_apply,3,[{file,"proc_lib.erl"},{line,227}]}]} ancestors: [riak_core_sup,<0.135.0>] messages: [] links: [<0.136.0>] dictionary: [] trap_exit: true status: running heap_size: 377 stack_size: 24 reductions: 403 neighbours: You can find the riak console output below: wolfiem@f01:~$ riak console Attempting to restart script through sudo -H -u riak Exec: /usr/lib/riak/erts-5.9.1/bin/erlexec -boot /usr/lib/riak/releases/1.2.0/riak -embedded -config /etc/riak/app.config -pa /usr/lib/riak/basho-patches -args_file /etc/riak/vm.args -- console Root: /usr/lib/riak Erlang R15B01 (erts-5.9.1) [source] [64-bit] [smp:8:8] [async-threads:64] [kernel-poll:true] =INFO REPORT==== 11-Sep-2012::10:44:18 === alarm_handler: {set,{system_memory_high_watermark,[]}} ** /usr/lib/riak/lib/observer-1.1/ebin/etop_txt.beam hides /usr/lib/riak/lib/basho-patches/etop_txt.beam ** Found 1 name clashes in code paths 10:44:19.099 [info] Application lager started on node '[email protected]' 10:44:19.130 [warning] No ring file available. 10:44:19.158 [error] CRASH REPORT Process <0.164.0> with 0 neighbours exited with reason: eaddrnotavail in gen_server:init_it/6 line 320 /usr/lib/riak/lib/os_mon-2.2.9/priv/bin/memsup: Erlang has closed. =INFO REPORT==== 11-Sep-2012::10:44:19 === alarm_handler: {clear,system_memory_high_watermark} Erlang has closed {"Kernel pid terminated",application_controller,"{application_start_failure,riak_core,{shutdown,{riak_core_app,start,[normal,[]]}}}"} Crash dump was written to: /var/log/riak/erl_crash.dump Kernel pid terminated (application_controller) ({application_start_failure,riak_core,{shutdown,{riak_core_app,start,[normal,[]]}}})

  Read the article

• apache2 namevirtualhost resolving wrong site

  - by joe

  Running apache 2.2.6. I'm setting up a development environment. dev and production will be hosted on the same machine, same IP address. DNS entries like prod.domain.com and dev.domain.com point to the same IP. * Imprortant: it is required that dev and prod are otherwise completely separate. Each will run it's own apache instance. Each will use it's own apache configuration. Each, prod and dev, will host http and https. I have this set up and working, but not as restrictive as I'd like. For instance, the production config: NameVirtualHost *:80 NameVirtualHost *:443 <VirtualHost *:80 > ServerName prod.domain.com # ... etc </VirtualHost> <VirtualHost *:443 > ServerName prod.domain.com # ... etc </VirtualHost> The dev site is set up similarly, using ports 8080 and 4443. Each site works fine. But assuming both apaches are running, one can also hit "cross-site" by mistake. So, inadvertently hitting prod.domain.com:8080 successfully returns a page from the dev site. It would be much better if this failed completely. This is a bit more difficult to solve (for me) because of the need for two apache configs. If all in one, the single process would have full knowledge of everything. So, I tried to solve this with brute force, including virtual hosts for the "other" site, with something that would fail, like no access to documentroot. But apache then inexplicably finds the "wrong" virtual host. Here's the full config for production, with the dummy dev configs. NameVirtualHost *:80 NameVirtualHost *:443 # ---------------------------------------------- # DUMMY HOSTS <VirtualHost *:8080 > ServerName dev.domain.com:8080 DocumentRoot /tmp/ <Directory /tmp/ > Order deny,allow Deny from all </Directory> </VirtualHost> <VirtualHost *:4443 > ServerName dev.domain.com:4443 DocumentRoot /tmp/ <Directory /tmp/ > Order deny,allow Deny from all </Directory> </VirtualHost> # ---------------------------------------------- # REAL PRODUCTION HOSTS <VirtualHost *:80 > ServerName prod.domain.com:80 DocumentRoot /something/valid/ <Directory /something/valid/> Order allow,deny Allow from all </Directory> </VirtualHost> <VirtualHost *:443 > ServerName prod.domain.com:443 DocumentRoot /something/valid/ <Directory /something/valid/> Order allow,deny Allow from all </Directory> # .... other valid ssl setup </VirtualHost> Here's the strange thing. With this configuration, a prod.domain.com:80 hit succeeds. But a prod.domain.com:443 hit fails, because it finds the dev.domain.com:4443 instead. I've also tried removing the port from the ServerName, but it still doesn't work. Sorry for the long question. Hopefully this is enough information. Thanks in advance for any help.

  Read the article

• Openswan ipsec transport tunnel not going up

  - by gparent

  On ClusterA and B I have installed the "openswan" package on Debian Squeeze. ClusterA ip is 172.16.0.107, B is 172.16.0.108 When they ping one another, it does not reach the destination. /etc/ipsec.conf: version 2.0 # conforms to second version of ipsec.conf specification config setup protostack=netkey oe=off conn L2TP-PSK-CLUSTER type=transport left=172.16.0.107 right=172.16.0.108 auto=start ike=aes128-sha1-modp2048 authby=secret compress=yes /etc/ipsec.secrets: 172.16.0.107 172.16.0.108 : PSK "L2TPKEY" 172.16.0.108 172.16.0.107 : PSK "L2TPKEY" Here is the result of ipsec verify on both machines: root@cluster2:~# ipsec verify Checking your system to see if IPsec got installed and started correctly: Version check and ipsec on-path [OK] Linux Openswan U2.6.28/K2.6.32-5-amd64 (netkey) Checking for IPsec support in kernel [OK] NETKEY detected, testing for disabled ICMP send_redirects [OK] NETKEY detected, testing for disabled ICMP accept_redirects [OK] Checking that pluto is running [OK] Pluto listening for IKE on udp 500 [OK] Pluto listening for NAT-T on udp 4500 [FAILED] Checking for 'ip' command [OK] Checking for 'iptables' command [OK] Opportunistic Encryption Support [DISABLED] root@cluster2:~# This is the end of the output of ipsec auto --status: 000 "cluster": 172.16.0.108<172.16.0.108>[+S=C]...172.16.0.107<172.16.0.107>[+S=C]; prospective erouted; eroute owner: #0 000 "cluster": myip=unset; hisip=unset; 000 "cluster": ike_life: 3600s; ipsec_life: 28800s; rekey_margin: 540s; rekey_fuzz: 100%; keyingtries: 0 000 "cluster": policy: PSK+ENCRYPT+COMPRESS+PFS+UP+IKEv2ALLOW+lKOD+rKOD; prio: 32,32; interface: eth0; 000 "cluster": newest ISAKMP SA: #1; newest IPsec SA: #0; 000 "cluster": IKE algorithm newest: AES_CBC_128-SHA1-MODP2048 000 000 #3: "cluster":500 STATE_QUICK_R0 (expecting QI1); EVENT_CRYPTO_FAILED in 298s; lastdpd=-1s(seq in:0 out:0); idle; import:admin initiate 000 #2: "cluster":500 STATE_QUICK_I1 (sent QI1, expecting QR1); EVENT_RETRANSMIT in 13s; lastdpd=-1s(seq in:0 out:0); idle; import:admin initiate 000 #1: "cluster":500 STATE_MAIN_I4 (ISAKMP SA established); EVENT_SA_REPLACE in 2991s; newest ISAKMP; lastdpd=-1s(seq in:0 out:0); idle; import:admin initiate 000 Interestingly enough, if I do ike-scan on the server here's what happens: Doesn't seem to take my ike settings into account root@cluster1:~# ike-scan -M 172.16.0.108 Starting ike-scan 1.9 with 1 hosts (http://www.nta-monitor.com/tools/ike-scan/) 172.16.0.108 Main Mode Handshake returned HDR=(CKY-R=641bffa66ba717b6) SA=(Enc=3DES Hash=SHA1 Auth=PSK Group=2:modp1024 LifeType=Seconds LifeDuration(4)=0x00007080) VID=4f45517b4f7f6e657a7b4351 VID=afcad71368a1f1c96b8696fc77570100 (Dead Peer Detection v1.0) Ending ike-scan 1.9: 1 hosts scanned in 0.008 seconds (118.19 hosts/sec). 1 returned handshake; 0 returned notify root@cluster1:~# I can't tell what's going on here, this is pretty much the simplest config I can have according to the examples.

  Read the article

• Courier Maildrop error user unknown. Command output: Invalid user specified

  - by cad

  Hello I have a problem with maildrop. I have read dozens of webs/howto/emails but couldnt solve it. My objective is moving automatically spam messages to a spam folder. My email server is working perfectly. It marks spam in subject and headers using spamassasin. My box has: Ubuntu 9.04 Web: Apache2 + Php5 + MySQL MTA: Postfix 2.5.5 + SpamAssasin + virtual users using mysql IMAP: Courier 0.61.2 + Courier AuthLib WebMail: SquirrelMail I have read that I could use Squirrelmail directly (not a good idea), procmail or maildrop. As I already have maildrop in the box (from courier) I have configured the server to use maildrop (added an entry in transport table for a virtual domain). I found this error in email: This is the mail system at host foo.net I'm sorry to have to inform you that your message could not be delivered to one or more recipients. It's attached below. For further assistance, please send mail to postmaster. If you do so, please include this problem report. You can delete your own text from the attached returned message. The mail system <[email protected]>: user unknown. Command output: Invalid user specified. Final-Recipient: rfc822; [email protected] Action: failed Status: 5.1.1 Diagnostic-Code: x-unix; Invalid user specified. ---------- Forwarded message ---------- From: test <[email protected]> To: [email protected] Date: Sat, 1 May 2010 19:49:57 +0100 Subject: fail fail An this in the logs May 1 18:50:18 foo.net postfix/smtpd[14638]: connect from mail-bw0-f212.google.com[209.85.218.212] May 1 18:50:19 foo.net postfix/smtpd[14638]: 8A9E9DC23F: client=mail-bw0-f212.google.com[209.85.218.212] May 1 18:50:19 foo.net postfix/cleanup[14643]: 8A9E9DC23F: message-id=<[email protected]> May 1 18:50:19 foo.net postfix/qmgr[14628]: 8A9E9DC23F: from=<[email protected]>, size=1858, nrcpt=1 (queue active) May 1 18:50:23 foo.net postfix/pickup[14627]: 1D4B4DC2AA: uid=5002 from=<[email protected]> May 1 18:50:23 foo.net postfix/cleanup[14643]: 1D4B4DC2AA: message-id=<[email protected]> May 1 18:50:23 foo.net postfix/pipe[14644]: 8A9E9DC23F: to=<[email protected]>, relay=spamassassin, delay=3.8, delays=0.55/0.02/0/3.2, dsn=2.0.0, status=sent (delivered via spamassassin service) May 1 18:50:23 foo.net postfix/qmgr[14628]: 8A9E9DC23F: removed May 1 18:50:23 foo.net postfix/qmgr[14628]: 1D4B4DC2AA: from=<[email protected]>, size=2173, nrcpt=1 (queue active) **May 1 18:50:23 foo.netpostfix/pipe[14648]: 1D4B4DC2AA: to=<[email protected]>, relay=maildrop, delay=0.22, delays=0.06/0.01/0/0.15, dsn=5.1.1, status=bounced (user unknown. Command output: Invalid user specified. )** May 1 18:50:23 foo.net postfix/cleanup[14643]: 4C2BFDC240: message-id=<[email protected]> May 1 18:50:23 foo.net postfix/qmgr[14628]: 4C2BFDC240: from=<>, size=3822, nrcpt=1 (queue active) May 1 18:50:23 foo.net postfix/bounce[14651]: 1D4B4DC2AA: sender non-delivery notification: 4C2BFDC240 May 1 18:50:23 foo.net postfix/qmgr[14628]: 1D4B4DC2AA: removed May 1 18:50:24 foo.net postfix/smtp[14653]: 4C2BFDC240: to=<[email protected]>, relay=gmail-smtp-in.l.google.com[209.85.211.97]:25, delay=0.91, delays=0.02/0.03/0.12/0.74, dsn=2.0.0, status=sent (250 2.0.0 OK 1272739824 37si5422420ywh.59) May 1 18:50:24 foo.net postfix/qmgr[14628]: 4C2BFDC240: removed My config files: http://lar3d.net/main.cf (/etc/postfix) http://lar3d.net/master.c (/etc/postfix) http://lar3d.net/local.cf (/etc/spamassasin) http://lar3d.net/maildroprc (maildroprc) If I change master.cf line (as suggested here) maildrop unix - n n - - pipe flags=DRhu user=vmail argv=/usr/lib/courier/bin/maildrop -d ${recipient} with maildrop unix - n n - - pipe flags=DRhu user=vmail argv=/usr/lib/courier/bin/maildrop -d vmail ${recipient} I get the email in /home/vmail/MailDir instead of the correct dir (/home/vmail/foo.net/info/.SPAM ) After reading a lot I have some guess but not sure. - Maybe I have to install userdb? - Maybe is something related with mysql, but everything is working ok - If I try with procmail I will face same problem... - What are flags DRhu for? Couldnt find doc about them - In some places I found maildrop line with more parameters flags=DRhu user=vmail argv=/usr/lib/courier/bin/maildrop -d $ ${recipient} ${extension} ${recipient} ${user} ${nexthop} ${sender} I am really lost. Dont know how to continue. If you have any idea or need another config file please let me know. Thanks!!!

  Read the article

• how does openvpn decide which interface to get IP addrs from

  - by bkrupa

  Using ubuntu 10.04 on both ends. We have a client and server machine on the SAME network attempting to make a vpn connection. We use the config files from here and made minimal changes. The server and client start and seem to connect without any trouble. The server looks like: Wed Feb 23 22:13:22 2011 MULTI: multi_create_instance called Wed Feb 23 22:13:22 2011 192.168.1.55:47166 Re-using SSL/TLS context Wed Feb 23 22:13:22 2011 192.168.1.55:47166 LZO compression initialized Wed Feb 23 22:13:22 2011 192.168.1.55:47166 Control Channel MTU parms [ L:1574 D:138 EF:38 EB:0 ET:0 EL:0 ] Wed Feb 23 22:13:22 2011 192.168.1.55:47166 Data Channel MTU parms [ L:1574 D:1450 EF:42 EB:135 ET:32 EL:0 AF:3/1 ] Wed Feb 23 22:13:22 2011 192.168.1.55:47166 Local Options hash (VER=V4): 'f7df56b8' Wed Feb 23 22:13:22 2011 192.168.1.55:47166 Expected Remote Options hash (VER=V4): 'd79ca330' Wed Feb 23 22:13:22 2011 192.168.1.55:47166 TLS: Initial packet from 192.168.1.55:47166, sid=69112e42 5458135b *...* Wed Feb 23 22:13:22 2011 192.168.1.55:47166 Control Channel: TLSv1, cipher TLSv1/SSLv3 DHE-RSA-AES256-SHA, 1024 bit RSA Wed Feb 23 22:13:22 2011 192.168.1.55:47166 [client1] Peer Connection Initiated with 192.168.1.55:47166 On the client side the connection looks like: Wed Feb 23 22:20:07 2011 [server] Peer Connection Initiated with [AF_INET]192.168.1.41:1194 Wed Feb 23 22:20:10 2011 SENT CONTROL [server]: 'PUSH_REQUEST' (status=1) Wed Feb 23 22:20:10 2011 PUSH: Received control message: 'PUSH_REPLY,route-gateway 10.8.0.4,ping 10,ping-restart 120,ifconfig 10.8.0.50 255.255.255.0' ... Wed Feb 23 22:20:10 2011 /sbin/ifconfig tap0 10.8.0.50 netmask 255.255.255.0 mtu 1500 broadcast 10.8.0.255 Wed Feb 23 22:20:10 2011 Initialization Sequence Completed The openvpn server has been configured to assign ip addresses in the range 10.8.0.* and the client has been given 10.8.0.50. When I run the following nmap from the client: Starting Nmap 5.00 ( http://nmap.org ) at 2011-02-23 22:04 EST Host 10.8.0.50 is up (0.00047s latency). Nmap done: 256 IP addresses (1 host up) scanned in 30.34 seconds Host 192.168.1.1 is up (0.0025s latency). Host 192.168.1.18 is up (0.074s latency). Host 192.168.1.41 is up (0.0024s latency). Host 192.168.1.55 is up (0.00018s latency). Nmap done: 256 IP addresses (4 hosts up) scanned in 6.33 seconds If I run an nmap from the server on 10.8.0.* I get nothing. If the client has two interfaces (wireless and tap device) when you look for a certain ip address, how does it decide which interface to connect on? edit I am trying to set up a vpn so that I can connect to my home network from a remote network. It seems like openvpn is connecting but none of the computers on my home network appear as network machines even after the connection is "Established". Stripped versions of the client and server config files are posted below. Thanks for any help you can offer. server.conf port 1194 proto udp dev tap ca /etc/openvpn/easy-rsa/keys/ca.crt cert /etc/openvpn/easy-rsa/keys/server.crt key /etc/openvpn/easy-rsa/keys/server.key # This file should be kept secret dh /etc/openvpn/easy-rsa/keys/dh1024.pem ifconfig-pool-persist ipp.txt server-bridge 10.8.0.4 255.255.255.0 10.8.0.50 10.8.0.100 keepalive 10 120 comp-lzo persist-key persist-tun status openvpn-status.log verb 3 client.conf client dev tap dev-node tap0901 proto udp remote ********** 1194 resolv-retry infinite nobind persist-key persist-tun ca ca.crt cert client1.crt key client1.key comp-lzo verb 3 one other thing that might be helpful, I tried to connect using the openvpn gui for windows and the connection stalls out on "obtaining configuration" and the bar just scrolls forever.

  Read the article

• cherrypy fails to stop when puppet tries to ensure running and refresh it at the same time

  - by ento

  I am trying to manage a cherrypy service with puppet. However, when the configuration is applied, cherryd ends up with no PID file although the process is up and running. Since the PID file is lost I can no longer stop the process with /etc/init.d/mycherryd stop (unless I modify the handmade init script to lookup the PID with ps or something.) $ /etc/init.d/mycherryd status cherryd dead but subsys locked The problem seems to be that puppet is trying to refresh/restart cherryd (triggered by changes in configuration files) immediately after ensuring it's running (as specified in the manifest), and cherrypy fails to stop and start (restart) itself while still executing its startup process. Is there a clear cut solution to this problem? Is this a bug on the cherrypy side, or can I write a puppet manifest so refresh is called only after the service is up and running? Any suggestion welcome. cherrypy log See how cherrypy catches SIGTERM midway through startup and still starts to listen. :cherrypy.error[18666] 2010-02-12 13:10:23,551 INFO: ENGINE Listening for SIGHUP. :cherrypy.error[18666] 2010-02-12 13:10:23,552 INFO: ENGINE Listening for SIGTERM. :cherrypy.error[18666] 2010-02-12 13:10:23,552 INFO: ENGINE Listening for SIGUSR1. :cherrypy.error[18666] 2010-02-12 13:10:23,552 INFO: ENGINE Bus STARTING :cherrypy.error[18671] 2010-02-12 13:10:23,554 INFO: ENGINE Daemonized to PID: 18671 :cherrypy.error[18671] 2010-02-12 13:10:23,554 INFO: ENGINE PID 18671 written to '/var/mycherryd/cherry.pid'. :cherrypy.error[18671] 2010-02-12 13:10:23,555 INFO: ENGINE Started monitor thread '_TimeoutMonitor'. :cherrypy.error[18670] 2010-02-12 13:10:23,556 INFO: ENGINE Forking twice. :cherrypy.error[18666] 2010-02-12 13:10:23,557 INFO: ENGINE Forking once. :cherrypy.error[18671] 2010-02-12 13:10:23,716 INFO: ENGINE Caught signal SIGTERM. :cherrypy.error[18671] 2010-02-12 13:10:23,716 INFO: ENGINE Bus STOPPING :cherrypy.error[18671] 2010-02-12 13:10:23,716 INFO: ENGINE HTTP Server cherrypy._cpwsgi_server.CPWSGIServer(('0.0.0.0', 12380)) already shut down :cherrypy.error[18671] 2010-02-12 13:10:23,717 INFO: ENGINE Stopped thread '_TimeoutMonitor'. :cherrypy.error[18671] 2010-02-12 13:10:23,717 INFO: ENGINE Bus STOPPED :cherrypy.error[18671] 2010-02-12 13:10:23,732 INFO: ENGINE Bus EXITING :cherrypy.error[18671] 2010-02-12 13:10:23,759 INFO: ENGINE PID file removed: '/var/mycherryd/cherry.pid'. :cherrypy.error[18671] 2010-02-12 13:10:23,782 INFO: ENGINE Bus EXITED :cherrypy.error[18671] 2010-02-12 13:10:23,792 INFO: ENGINE Serving on 0.0.0.0:12380 :cherrypy.error[18671] 2010-02-12 13:10:23,826 INFO: ENGINE Bus STARTED puppet log puppet tries to refresh the service immediately after ensuring it to be 'running'. Feb 12 13:10:22 localhost puppetd[8159]: (//mycherrypy/File[conffiles]) Scheduling refresh of Service[cherryd] Feb 12 13:10:22 localhost last message repeated 12 times Feb 12 13:10:23 localhost puppetd[8159]: (//mycherrypy/Service[mycherryd]/ensure) ensure changed 'stopped' to 'running' Feb 12 13:10:23 localhost puppetd[8159]: (//mycherrypy/Service[mycherryd]) Triggering 'refresh' from 13 dependencies Feb 12 13:11:23 localhost puppetd[8159]: (//mycherrypy/Service[mycherryd]) Failed to call refresh on Service[mycherryd]: Could not stop Service[mycherryd]: Execution of '/sbin/service mycherryd stop' returned 1: at /etc/puppet/manifests/mycherrypy.pp:161 Feb 12 13:11:24 localhost puppetd[8159]: Value of 'preferred_serialization_format' (pson) is invalid for report, using default (marshal) Feb 12 13:11:24 localhost puppetd[8159]: Finished catalog run in 99.25 seconds puppet manifest excerpt class mycherrypy { file { 'rpm': path => "/tmp/${apiserver}.i386.rpm", source => "${fileserver}/${apiserver}.i386.rpm"; 'conffiles': require => Package["${apiserver}"], path => "${service_home}/config/", ensure => present, source => "${fileserver}/config/", notify => Service["mycherryd"]; } package { "$apiserver": provider => 'rpm', source => "/tmp/${apiserver}.i386.rpm", ensure => latest; } service { "mycherryd": require => [File["conffiles"], Package["${apiserver}"]], ensure => running, provider => redhat, hasstatus => true; } }

  Read the article

• Connecting tomcat6 to apache2

  - by StudentKen

  Disclaimier: Not a server admin I've been scratching my head over this for weeks now (not consistently mind you, as that would be maddening). I've been trying to connect my apache2 server to my tomcat server to the point where if someone encounters *.jsp or any servelet in navigating my web directory, it's handed over to tomcat. I have both Apache2.0 (port 9099) and Tomcat6 (9089) running on Debian lenny on the same box. Currently, mod_jk is enabled with mod_jk.conf in $apacheHOME/mods-enabled/ with content: # Where to find workers.properties JkWorkersFile /etc/apache2/workers.properties # Where to put jk shared memory JkShmFile /var/log/at_jk/mod_jk.shm # Where to put jk logs JkLogFile /var/log/at_jk/mod_jk.log # Set the jk log level [debug/error/info] JkLogLevel info # Select the timestamp log format JkLogStampFormat "[%a %b %d %H:%M:%S %Y] " # Send servlet for context /examples to worker named worker1 JkMount /*/servlet/* worker1 # Send JSPs for context /examples to worker named worker1 JkMount /*.jsp worker1 my workers.properties located in $apacheHOME/ with content: workers.tomcat_home=/var/lib/tomcat6 workers.java_home=/usr/lib/jdk1.6.0_23/db/ worker.list=worker1 ps=/ worker.worker1.port=9071 worker.worker1.host=localhost worker.worker1.type=ajp13 my web.xml in $tomcatHOME/conf has the following servlets enabled <servlet> <servlet-name>default</servlet-name> <servlet-class>org.apache.catalina.servlets.DefaultServlet</servlet-cla$ <init-param> <param-name>debug</param-name> <param-value>0</param-value> </init-param> <init-param> <param-name>listings</param-name> <param-value>false</param-value> </init-param> <load-on-startup>1</load-on-startup> </servlet> <servlet> <servlet-name>jsp</servlet-name> <servlet-class>org.apache.jasper.servlet.JspServlet</servlet-class> <init-param> <param-name>fork</param-name> <param-value>false</param-value> </init-param> <init-param> <param-name>xpoweredBy</param-name> <param-value>false</param-value> </init-param> <load-on-startup>3</load-on-startup> </servlet> <servlet-mapping> <servlet-name>jsp</servlet-name> <url-pattern>*.jsp</url-pattern> </servlet-mapping> <session-config> <session-timeout>30</session-timeout> </session-config> From what I can tell, there's no funny buisness as both the apache2, tomcat, and mod_jk logs show green; yet whenever I navigate to a jsp, it simply displays the javascript. I'm unsure what the problem is exactly despite pouring over the logs and documentation for aid. I'm quite a greenhorn in the servelet world.

  Read the article

• Memcache on ubuntu server lucid and ruby 1.9.1

  - by Thiago

  Hi there, I'm trying to set up a memcache server on the above setup. I'm getting the following error: /var/lib/gems/1.9.1/gems/activesupport-2.3.8/lib/active_support/dependencies.rb:443:in `load_missing_constant': uninitialized constant MemCache (NameError) from /var/lib/gems/1.9.1/gems/activesupport-2.3.8/lib/active_support/dependencies.rb:80:in `const_missing_with_dependencies' from /var/lib/gems/1.9.1/gems/activesupport-2.3.8/lib/active_support/dependencies.rb:92:in `const_missing' from /root/voicegateway/vendor/plugins/workling/lib/workling/clients/memcache_queue_client.rb:18:in `<class:MemcacheQueueClient>' from /root/voicegateway/vendor/plugins/workling/lib/workling/clients/memcache_queue_client.rb:14:in `<module:Clients>' from /root/voicegateway/vendor/plugins/workling/lib/workling/clients/memcache_queue_client.rb:13:in `<module:Workling>' from /root/voicegateway/vendor/plugins/workling/lib/workling/clients/memcache_queue_client.rb:12:in `<top (required)>' from /var/lib/gems/1.9.1/gems/activesupport-2.3.8/lib/active_support/dependencies.rb:156:in `require' from /var/lib/gems/1.9.1/gems/activesupport-2.3.8/lib/active_support/dependencies.rb:156:in `block in require' from /var/lib/gems/1.9.1/gems/activesupport-2.3.8/lib/active_support/dependencies.rb:521:in `new_constants_in' from /var/lib/gems/1.9.1/gems/activesupport-2.3.8/lib/active_support/dependencies.rb:156:in `require' from /root/voicegateway/vendor/plugins/workling/lib/workling/remote/runners/client_runner.rb:2:in `<top (required)>' from /var/lib/gems/1.9.1/gems/activesupport-2.3.8/lib/active_support/dependencies.rb:156:in `require' from /var/lib/gems/1.9.1/gems/activesupport-2.3.8/lib/active_support/dependencies.rb:156:in `block in require' from /var/lib/gems/1.9.1/gems/activesupport-2.3.8/lib/active_support/dependencies.rb:521:in `new_constants_in' from /var/lib/gems/1.9.1/gems/activesupport-2.3.8/lib/active_support/dependencies.rb:156:in `require' from /root/voicegateway/vendor/plugins/workling/lib/workling/remote/runners/starling_runner.rb:1:in `<top (required)>' from /var/lib/gems/1.9.1/gems/activesupport-2.3.8/lib/active_support/dependencies.rb:156:in `require' from /var/lib/gems/1.9.1/gems/activesupport-2.3.8/lib/active_support/dependencies.rb:156:in `block in require' from /var/lib/gems/1.9.1/gems/activesupport-2.3.8/lib/active_support/dependencies.rb:521:in `new_constants_in' from /var/lib/gems/1.9.1/gems/activesupport-2.3.8/lib/active_support/dependencies.rb:156:in `require' from /root/voicegateway/vendor/plugins/workling/lib/workling/remote.rb:3:in `<top (required)>' from /var/lib/gems/1.9.1/gems/activesupport-2.3.8/lib/active_support/dependencies.rb:380:in `load' from /var/lib/gems/1.9.1/gems/activesupport-2.3.8/lib/active_support/dependencies.rb:380:in `block in load_file' from /var/lib/gems/1.9.1/gems/activesupport-2.3.8/lib/active_support/dependencies.rb:521:in `new_constants_in' from /var/lib/gems/1.9.1/gems/activesupport-2.3.8/lib/active_support/dependencies.rb:379:in `load_file' from /var/lib/gems/1.9.1/gems/activesupport-2.3.8/lib/active_support/dependencies.rb:259:in `require_or_load' from /var/lib/gems/1.9.1/gems/activesupport-2.3.8/lib/active_support/dependencies.rb:425:in `load_missing_constant' from /var/lib/gems/1.9.1/gems/activesupport-2.3.8/lib/active_support/dependencies.rb:80:in `const_missing_with_dependencies' from /root/voicegateway/config/environments/development.rb:20:in `block in load_environment' from /var/lib/gems/1.9.1/gems/rails-2.3.8/lib/initializer.rb:386:in `eval' from /var/lib/gems/1.9.1/gems/rails-2.3.8/lib/initializer.rb:386:in `block in load_environment' from /var/lib/gems/1.9.1/gems/activesupport-2.3.8/lib/active_support/core_ext/kernel/reporting.rb:11:in `silence_warnings' from /var/lib/gems/1.9.1/gems/rails-2.3.8/lib/initializer.rb:379:in `load_environment' from /var/lib/gems/1.9.1/gems/rails-2.3.8/lib/initializer.rb:137:in `process' from /var/lib/gems/1.9.1/gems/rails-2.3.8/lib/initializer.rb:113:in `run' from /root/voicegateway/config/environment.rb:9:in `<top (required)>' from /var/lib/gems/1.9.1/gems/activesupport-2.3.8/lib/active_support/dependencies.rb:156:in `require' from /var/lib/gems/1.9.1/gems/activesupport-2.3.8/lib/active_support/dependencies.rb:156:in `block in require' from /var/lib/gems/1.9.1/gems/activesupport-2.3.8/lib/active_support/dependencies.rb:521:in `new_constants_in' from /var/lib/gems/1.9.1/gems/activesupport-2.3.8/lib/active_support/dependencies.rb:156:in `require' from /var/lib/gems/1.9.1/gems/rails-2.3.8/lib/commands/server.rb:84:in `<top (required)>' from ./server:3:in `require' from ./server:3:in `<main>' But memcache-client 1.8.3 is on the gem list. What's the problem?

  Read the article

• cherrypy fails to stop when puppet tries to ensure running and refresh it at the same time

  - by ento

  I am trying to manage a cherrypy service with puppet. However, when the configuration is applied, cherryd ends up with no PID file although the process is up and running. Since the PID file is lost I can no longer stop the process with /etc/init.d/mycherryd stop (unless I modify the handmade init script to lookup the PID with ps or something.) $ /etc/init.d/mycherryd status cherryd dead but subsys locked The problem seems to be that puppet is trying to refresh/restart cherryd (triggered by changes in configuration files) immediately after ensuring it's running (as specified in the manifest), and cherrypy fails to stop and start (restart) itself while still executing its startup process. Is there a clear cut solution to this problem? Is this a bug on the cherrypy side, or can I write a puppet manifest so refresh is called only after the service is up and running? Any suggestion welcome. cherrypy log See how cherrypy catches SIGTERM midway through startup and still starts to listen. :cherrypy.error[18666] 2010-02-12 13:10:23,551 INFO: ENGINE Listening for SIGHUP. :cherrypy.error[18666] 2010-02-12 13:10:23,552 INFO: ENGINE Listening for SIGTERM. :cherrypy.error[18666] 2010-02-12 13:10:23,552 INFO: ENGINE Listening for SIGUSR1. :cherrypy.error[18666] 2010-02-12 13:10:23,552 INFO: ENGINE Bus STARTING :cherrypy.error[18671] 2010-02-12 13:10:23,554 INFO: ENGINE Daemonized to PID: 18671 :cherrypy.error[18671] 2010-02-12 13:10:23,554 INFO: ENGINE PID 18671 written to '/var/mycherryd/cherry.pid'. :cherrypy.error[18671] 2010-02-12 13:10:23,555 INFO: ENGINE Started monitor thread '_TimeoutMonitor'. :cherrypy.error[18670] 2010-02-12 13:10:23,556 INFO: ENGINE Forking twice. :cherrypy.error[18666] 2010-02-12 13:10:23,557 INFO: ENGINE Forking once. :cherrypy.error[18671] 2010-02-12 13:10:23,716 INFO: ENGINE Caught signal SIGTERM. :cherrypy.error[18671] 2010-02-12 13:10:23,716 INFO: ENGINE Bus STOPPING :cherrypy.error[18671] 2010-02-12 13:10:23,716 INFO: ENGINE HTTP Server cherrypy._cpwsgi_server.CPWSGIServer(('0.0.0.0', 12380)) already shut down :cherrypy.error[18671] 2010-02-12 13:10:23,717 INFO: ENGINE Stopped thread '_TimeoutMonitor'. :cherrypy.error[18671] 2010-02-12 13:10:23,717 INFO: ENGINE Bus STOPPED :cherrypy.error[18671] 2010-02-12 13:10:23,732 INFO: ENGINE Bus EXITING :cherrypy.error[18671] 2010-02-12 13:10:23,759 INFO: ENGINE PID file removed: '/var/mycherryd/cherry.pid'. :cherrypy.error[18671] 2010-02-12 13:10:23,782 INFO: ENGINE Bus EXITED :cherrypy.error[18671] 2010-02-12 13:10:23,792 INFO: ENGINE Serving on 0.0.0.0:12380 :cherrypy.error[18671] 2010-02-12 13:10:23,826 INFO: ENGINE Bus STARTED puppet log puppet tries to refresh the service immediately after ensuring it to be 'running'. Feb 12 13:10:22 localhost puppetd[8159]: (//mycherrypy/File[conffiles]) Scheduling refresh of Service[cherryd] Feb 12 13:10:22 localhost last message repeated 12 times Feb 12 13:10:23 localhost puppetd[8159]: (//mycherrypy/Service[mycherryd]/ensure) ensure changed 'stopped' to 'running' Feb 12 13:10:23 localhost puppetd[8159]: (//mycherrypy/Service[mycherryd]) Triggering 'refresh' from 13 dependencies Feb 12 13:11:23 localhost puppetd[8159]: (//mycherrypy/Service[mycherryd]) Failed to call refresh on Service[mycherryd]: Could not stop Service[mycherryd]: Execution of '/sbin/service mycherryd stop' returned 1: at /etc/puppet/manifests/mycherrypy.pp:161 Feb 12 13:11:24 localhost puppetd[8159]: Value of 'preferred_serialization_format' (pson) is invalid for report, using default (marshal) Feb 12 13:11:24 localhost puppetd[8159]: Finished catalog run in 99.25 seconds puppet manifest excerpt class mycherrypy { file { 'rpm': path => "/tmp/${apiserver}.i386.rpm", source => "${fileserver}/${apiserver}.i386.rpm"; 'conffiles': require => Package["${apiserver}"], path => "${service_home}/config/", ensure => present, source => "${fileserver}/config/", notify => Service["mycherryd"]; } package { "$apiserver": provider => 'rpm', source => "/tmp/${apiserver}.i386.rpm", ensure => latest; } service { "mycherryd": require => [File["conffiles"], Package["${apiserver}"]], ensure => running, provider => redhat, hasstatus => true; } }

  Read the article

• Configuring Wireless on Cisco 851W

  - by Aequitarum Custos

  Either a powersurge or something caused our router's configuration to get wiped, and our last backup was before the wireless network was setup. We have not been able to reconfigure the wireless since then, so was curious if anyone here would be able to determine what configuration is needed. We are using a Cisco 851W running 12.4(15)T9 We would like to use WPA encryption, and have it on the same network as the rest of the office network. Config file is below: User Access Verification Building configuration... Current configuration : 3857 bytes ! version 12.4 no service pad service timestamps debug datetime msec service timestamps log datetime msec service password-encryption no service dhcp ! hostname BOB ! boot-start-marker boot-end-marker ! enable secret 5 ********************* ! no aaa new-model ! ! dot11 syslog no ip source-route ! ! ip cef no ip bootp server ip domain name BOB.com ip name-server 61.11.1.1 ip name-server 61.11.1.2 ! ! ! username BOBB privilege 15 password 7 ************************* ! ! archive log config hidekeys ! ! ip tcp synwait-time 10 ! ! ! interface FastEthernet0 no cdp enable ! interface FastEthernet1 no cdp enable ! interface FastEthernet2 no cdp enable ! interface FastEthernet3 no cdp enable ! interface FastEthernet4 description WAN Connection$ETH-WAN$ ip address 61.11.1.14 255.255.254.0 ip nat outside ip virtual-reassembly duplex auto speed auto no cdp enable ! interface Dot11Radio0 no ip address shutdown ! encryption mode ciphers tkip speed basic-1.0 basic-2.0 basic-5.5 6.0 9.0 basic-11.0 12.0 18.0 24.0 36.0 48.0 54.0 station-role root no cdp enable ! interface Dot11Radio0.1 encapsulation dot1Q 1 native no cdp enable bridge-group 1 bridge-group 1 subscriber-loop-control bridge-group 1 spanning-disabled bridge-group 1 block-unknown-source no bridge-group 1 source-learning no bridge-group 1 unicast-flooding ! interface Dot11Radio0.20 ip access-group Guest-ACL in no cdp enable ! interface Vlan1 description Internal Network ip address 192.168.2.60 255.255.255.0 ip nat inside ip nat enable ip virtual-reassembly ! ip forward-protocol nd ip route 0.0.0.0 0.0.0.0 61.11.2.14 ! ip http server no ip http secure-server ip nat inside source list 1 interface FastEthernet4 overload ! ip access-list extended Guest-ACL deny ip any 192.0.0.0 0.0.0.255 permit ip any any ! access-list 1 permit 192.0.0.0 0.0.0.255 access-list 100 remark SDM_ACL Category=2 access-list 100 permit ip 192.0.0.0 0.0.0.255 any no cdp run ! control-plane ! !

  Read the article

• Fix overscan in Linux with Intel graphics Vizio HDTV

  - by Padenton

  I am connecting my server to my HDTV so that I can conveniently display it there. My VIZIO HDTV cuts off all 4 edges. I already realize it is not optimal to be running a GUI on a server; this server will not have much external traffic so I prefer it for convenience. I have already spent countless hours searching for a fix, but all I could find required an ATI or NVIDIA graphics card, or didn’t work. In Windows, the Intel driver has a setting for underscan, though it seems only to be available by a glitch. Here’s my specs: Ubuntu Linux (Quantal 12.10) (Likely to switch to Arch) This is a home server computer, with KDE for managing(for now, at least) Graphics: Intel HD Graphics 4000 from Ivy Bridge Motherboard: ASRock Z77 Extreme4 CPU: Intel Core i5-3450 My monitors: Dell LCD monitor Vizio VX37L_HDTV10A 37" on HDMI input I have tried all of the following from both HDMI?HDMI and DVI?HDMI cables connected to the ports on my motherboard: Setting properties in xrandr Making sure drivers are all up to date Trying several different modes The TV was “cheap”; max resolution 1080i. I am able to get a 1920x1080 modeline, in both GNU/Linux and Windows, without difficulty. There is no setting in the menu to fix the overscan (I have tried all of them, I realize it’s not always called overscan). I have been in the service menu for the TV, which still does not contain an option to fix it. No aspect ratio settings, etc. The TV has a VGA connector but I am unsure if it would fix it, as I don’t have a VGA cable long enough, and am not sure it would get me the 1920x1080 resolution which I want. Using another resolution does not fix the problem. I tried custom modelines with the dimensions of my screen’s viewable area, but it wouldn’t let me use them. Ubuntu apparently doesn’t automatically generate an xorg.conf file for use. I read somewhere that modifying it may help solve it. I tried X -configure several times(with reboots, etc.) but it consistently gave the following error messages: In log file: … (WW) Falling back to old probe method for vesa Number of created screens does not match number of detected devices. Configuration failed. In output: … (++) Using config file: "/root/xorg.conf.new" (==) Using system config directory "/usr/share/X11/xorg.conf.d" Number of created screens does not match number of detected devices. Configuration failed. Server terminated with error (2). Closing log file. Tried using 'overscan' prop in xrandr: root@xxx:/home/xxx# xrandr --output HDMI1 --set overscan off X Error of failed request: BadName (named color or font does not exist) Major opcode of failed request: 140 (RANDR) Minor opcode of failed request: 11 (RRQueryOutputProperty) Serial number of failed request: 42 Current serial number in output stream: 42 'overscan on', 'underscan off', 'underscan on' were all also tried. Originally tried with Ubuntu 12.04, but failed and so updated to 12.10 when it was released. All software is up to date. I am not opposed to reinstalling my OS, likely will anyways (my preference being Arch).

  Read the article

• ServerAlias not working

  - by Janis Peisenieks

  I have a VPS, that I have configured to host multiple websites with name based hosting. It is all good while only using example.com, and www.example.com. It also works with example.net, but when I try example.net, it reverts to my default site configuration, which just shows my default (empty) index.html page. Here's the default file: <VirtualHost *:80> ServerAdmin webmaster@localhost DocumentRoot /var/www <Directory /> Options FollowSymLinks AllowOverride None </Directory> <Directory /var/www/> Options Indexes FollowSymLinks MultiViews AllowOverride All Order allow,deny allow from all </Directory> ScriptAlias /cgi-bin/ /usr/lib/cgi-bin/ <Directory "/usr/lib/cgi-bin"> AllowOverride None Options +ExecCGI -MultiViews +SymLinksIfOwnerMatch Order allow,deny Allow from all </Directory> ErrorLog /var/log/apache2/error.log # Possible values include: debug, info, notice, warn, error, crit, # alert, emerg. LogLevel warn CustomLog /var/log/apache2/access.log combined Alias /doc/ "/usr/share/doc/" <Directory "/usr/share/doc/"> Options Indexes MultiViews FollowSymLinks AllowOverride None Order deny,allow Deny from all Allow from 127.0.0.0/255.0.0.0 ::1/128 </Directory> </VirtualHost> Here's a configuration for the example.com site: <VirtualHost *:80> ServerAdmin [email protected] ServerName example.com ServerAlias www.example.com DocumentRoot /srv/www/example.com/public_html/ ErrorLog /srv/www/example.com/logs/error.log CustomLog /srv/www/example.com/logs/access.log combined <Directory /srv/www/example.com/public_html/> AllowOverride All Order allow,deny allow from all </Directory> </VirtualHost> And here is the config for the example.net site: <VirtualHost *:80> ServerAdmin [email protected] ServerName example.net ServerAlias www.example.net DocumentRoot /srv/www/example.net/public_html/ ErrorLog /srv/www/example.net/logs/error.log CustomLog /srv/www/example.net/logs/access.log combined <Directory /srv/www/example.net/public_html/> AllowOverride All Order allow,deny allow from all </Directory> </VirtualHost> Where could the problem be? I believe, that there is something going wrong with the ServerAlias property. Could it be because of the way the site's are built? Because example.com is a Joomla site, and example.net is a Zend Framework site. Just in case, I'll also insert the .htaccess files for example.net, since example.com has it's disabled: example.net: SetEnv APPLICATION_ENV development RewriteRule ^(browse|config).* - [L] ErrorDocument 500 /error-docs/500.shtml SetEnv CACHE_OFFSET 2678400 <FilesMatch "\.(ico|pdf|flv|jpg|jpeg|png|gif|js|css|swf)$"> Header set Expires "Fri, 25 Sep 2037 19:30:32 GMT" Header unset ETag FileETag None </FilesMatch> RewriteEngine On RewriteRule ^(adm|statistics) - [L] RewriteRule ^/public/(.*)$ http://example.net/$1 [R] RewriteRule ^(.*)$ public/$1 [L] Any help would be greatly appreciated! Edit So that my question is ABSOLUTELY clear: The problem is, that one site works with both www prefix as well as without it, and the second one does not. I would like to know how to enable the second site to work with www prefix as well.

  Read the article

• Memcache on ubuntu server lucid and ruby 1.9.1

  - by Thiago

  I'm trying to set up a memcache server on the above setup. I'm getting the following error: /var/lib/gems/1.9.1/gems/activesupport-2.3.8/lib/active_support/dependencies.rb:443:in `load_missing_constant': uninitialized constant MemCache (NameError) from /var/lib/gems/1.9.1/gems/activesupport-2.3.8/lib/active_support/dependencies.rb:80:in `const_missing_with_dependencies' from /var/lib/gems/1.9.1/gems/activesupport-2.3.8/lib/active_support/dependencies.rb:92:in `const_missing' from /root/voicegateway/vendor/plugins/workling/lib/workling/clients/memcache_queue_client.rb:18:in `<class:MemcacheQueueClient>' from /root/voicegateway/vendor/plugins/workling/lib/workling/clients/memcache_queue_client.rb:14:in `<module:Clients>' from /root/voicegateway/vendor/plugins/workling/lib/workling/clients/memcache_queue_client.rb:13:in `<module:Workling>' from /root/voicegateway/vendor/plugins/workling/lib/workling/clients/memcache_queue_client.rb:12:in `<top (required)>' from /var/lib/gems/1.9.1/gems/activesupport-2.3.8/lib/active_support/dependencies.rb:156:in `require' from /var/lib/gems/1.9.1/gems/activesupport-2.3.8/lib/active_support/dependencies.rb:156:in `block in require' from /var/lib/gems/1.9.1/gems/activesupport-2.3.8/lib/active_support/dependencies.rb:521:in `new_constants_in' from /var/lib/gems/1.9.1/gems/activesupport-2.3.8/lib/active_support/dependencies.rb:156:in `require' from /root/voicegateway/vendor/plugins/workling/lib/workling/remote/runners/client_runner.rb:2:in `<top (required)>' from /var/lib/gems/1.9.1/gems/activesupport-2.3.8/lib/active_support/dependencies.rb:156:in `require' from /var/lib/gems/1.9.1/gems/activesupport-2.3.8/lib/active_support/dependencies.rb:156:in `block in require' from /var/lib/gems/1.9.1/gems/activesupport-2.3.8/lib/active_support/dependencies.rb:521:in `new_constants_in' from /var/lib/gems/1.9.1/gems/activesupport-2.3.8/lib/active_support/dependencies.rb:156:in `require' from /root/voicegateway/vendor/plugins/workling/lib/workling/remote/runners/starling_runner.rb:1:in `<top (required)>' from /var/lib/gems/1.9.1/gems/activesupport-2.3.8/lib/active_support/dependencies.rb:156:in `require' from /var/lib/gems/1.9.1/gems/activesupport-2.3.8/lib/active_support/dependencies.rb:156:in `block in require' from /var/lib/gems/1.9.1/gems/activesupport-2.3.8/lib/active_support/dependencies.rb:521:in `new_constants_in' from /var/lib/gems/1.9.1/gems/activesupport-2.3.8/lib/active_support/dependencies.rb:156:in `require' from /root/voicegateway/vendor/plugins/workling/lib/workling/remote.rb:3:in `<top (required)>' from /var/lib/gems/1.9.1/gems/activesupport-2.3.8/lib/active_support/dependencies.rb:380:in `load' from /var/lib/gems/1.9.1/gems/activesupport-2.3.8/lib/active_support/dependencies.rb:380:in `block in load_file' from /var/lib/gems/1.9.1/gems/activesupport-2.3.8/lib/active_support/dependencies.rb:521:in `new_constants_in' from /var/lib/gems/1.9.1/gems/activesupport-2.3.8/lib/active_support/dependencies.rb:379:in `load_file' from /var/lib/gems/1.9.1/gems/activesupport-2.3.8/lib/active_support/dependencies.rb:259:in `require_or_load' from /var/lib/gems/1.9.1/gems/activesupport-2.3.8/lib/active_support/dependencies.rb:425:in `load_missing_constant' from /var/lib/gems/1.9.1/gems/activesupport-2.3.8/lib/active_support/dependencies.rb:80:in `const_missing_with_dependencies' from /root/voicegateway/config/environments/development.rb:20:in `block in load_environment' from /var/lib/gems/1.9.1/gems/rails-2.3.8/lib/initializer.rb:386:in `eval' from /var/lib/gems/1.9.1/gems/rails-2.3.8/lib/initializer.rb:386:in `block in load_environment' from /var/lib/gems/1.9.1/gems/activesupport-2.3.8/lib/active_support/core_ext/kernel/reporting.rb:11:in `silence_warnings' from /var/lib/gems/1.9.1/gems/rails-2.3.8/lib/initializer.rb:379:in `load_environment' from /var/lib/gems/1.9.1/gems/rails-2.3.8/lib/initializer.rb:137:in `process' from /var/lib/gems/1.9.1/gems/rails-2.3.8/lib/initializer.rb:113:in `run' from /root/voicegateway/config/environment.rb:9:in `<top (required)>' from /var/lib/gems/1.9.1/gems/activesupport-2.3.8/lib/active_support/dependencies.rb:156:in `require' from /var/lib/gems/1.9.1/gems/activesupport-2.3.8/lib/active_support/dependencies.rb:156:in `block in require' from /var/lib/gems/1.9.1/gems/activesupport-2.3.8/lib/active_support/dependencies.rb:521:in `new_constants_in' from /var/lib/gems/1.9.1/gems/activesupport-2.3.8/lib/active_support/dependencies.rb:156:in `require' from /var/lib/gems/1.9.1/gems/rails-2.3.8/lib/commands/server.rb:84:in `<top (required)>' from ./server:3:in `require' from ./server:3:in `<main>' But memcache-client 1.8.3 is on the gem list. What's the problem?

  Read the article

• Can I get advice on my nginx configuration (as a proxy in front of Jira and Confluence)?

  - by Nate

  I was wondering if I could get some advice on my nginx configuration. The config seems to be working, but I'm unsure if I'm doing everything properly. The basic idea is to have a Jira and Confluence server (in separate Tomcat instances) running on the same machine, with nginx in front to handle SSL for both. I want only SSL connections to be made to Jira/Confluence. Jira is running on 127.0.0.1:9090 and Confluence on 127.0.0.1:8080. Here is my nginx.conf, any advice or tips would be greatly appreciated. user nginx; worker_processes 1; error_log /var/log/nginx/error.log; pid /var/run/nginx.pid; events { worker_connections 1024; } http { include /etc/nginx/mime.types; default_type application/octet-stream; log_format main '$remote_addr - $remote_user [$time_local] $request ' '"$status" $body_bytes_sent "$http_referer" ' '"$http_user_agent" "$http_x_forwarded_for"'; access_log /var/log/nginx/access.log main; sendfile on; #tcp_nopush on; #keepalive_timeout 0; keepalive_timeout 65; #gzip on; # Load config files from the /etc/nginx/conf.d directory include /etc/nginx/conf.d/*.conf; # Our self-signed cert ssl_certificate /etc/ssl/certs/fissl.crt; ssl_certificate_key /etc/ssl/private/fissl.key; # redirect non-ssl Confluence to ssl server { listen 80; server_name confluence.example.com; rewrite ^(.*) https://confluence.example.com$1 permanent; } # redirect non-ssl Jira to ssl server { listen 80; server_name jira.example.com; rewrite ^(.*) https://jira.example.com$1 permanent; } # # The Confluence server # server { listen 443; server_name confluence.example.com; ssl on; access_log /var/log/nginx/confluence.access.log main; error_log /var/log/nginx/confluence.error.log; location / { proxy_pass http://127.0.0.1:8080; proxy_set_header X-Forwarded-Proto https; proxy_set_header Host $http_host; } error_page 404 /404.html; location = /404.html { root /usr/share/nginx/html; } redirect server error pages to the static page /50x.html error_page 500 502 503 504 /50x.html; location = /50x.html { root /usr/share/nginx/html; } } # # The Jira server # server { listen 443; server_name jira.example.com; ssl on; access_log /var/log/nginx/jira.access.log main; error_log /var/log/nginx/jira.error.log; location / { proxy_pass http://127.0.0.1:9090/; proxy_set_header X-Forwarded-Proto https; proxy_set_header Host $http_host; } error_page 404 /404.html; location = /404.html { root /usr/share/nginx/html; } # redirect server error pages to the static page /50x.html # error_page 500 502 503 504 /50x.html; location = /50x.html { root /usr/share/nginx/html; } } }

  Read the article

• FreeBSD with Vagrant - don't know how to check guest additions version

  - by joelmaranhao

  On Mac OS X 10.9.3 Picked a box from the VagrantCloud Init the vagrant box $ vagrant init chef/freebsd-9.2-i386 A `Vagrantfile` has been placed in this directory. You are now ready to `vagrant up` your first virtual environment! Please read the comments in the Vagrantfile as well as documentation on `vagrantup.com` for more information on using Vagrant. List the files $ ls -al -rw-r--r-- 1 joel staff 4831 Jun 5 17:17 Vagrantfile Vagrantfile content VAGRANTFILE_API_VERSION = "2" Vagrant.configure(VAGRANTFILE_API_VERSION) do |config| config.vm.box = "chef/freebsd-9.2-i386" end Starting my virtual box leads to Errors $ vagrant up Bringing machine 'default' up with 'virtualbox' provider... ==> default: Box 'chef/freebsd-9.2-i386' could not be found. Attempting to find and install... default: Box Provider: virtualbox default: Box Version: >= 0 ==> default: Loading metadata for box 'chef/freebsd-9.2-i386' default: URL: https://vagrantcloud.com/chef/freebsd-9.2-i386 ==> default: Adding box 'chef/freebsd-9.2-i386' (v1.0.0) for provider: virtualbox default: Downloading: https://vagrantcloud.com/chef/freebsd-9.2-i386/version/1/provider/virtualbox.box ==> default: Successfully added box 'chef/freebsd-9.2-i386' (v1.0.0) for 'virtualbox'! ==> default: Importing base box 'chef/freebsd-9.2-i386'... ==> default: Matching MAC address for NAT networking... ==> default: Checking if box 'chef/freebsd-9.2-i386' is up to date... ==> default: Setting the name of the VM: freebsd92-i386_default_1401982167145_49633 ==> default: Fixed port collision for 22 => 2222. Now on port 2201. ==> default: Clearing any previously set network interfaces... ==> default: Preparing network interfaces based on configuration... default: Adapter 1: nat ==> default: Forwarding ports... default: 22 => 2201 (adapter 1) ==> default: Booting VM... ==> default: Waiting for machine to boot. This may take a few minutes... default: SSH address: 127.0.0.1:2201 default: SSH username: vagrant default: SSH auth method: private key default: Warning: Connection timeout. Retrying... default: Warning: Connection timeout. Retrying... ==> default: Machine booted and ready! Sorry, don't know how to check guest version of Virtualbox Guest Additions on this platform. Stopping installation. ==> default: Checking for guest additions in VM... default: The guest additions on this VM do not match the installed version of default: VirtualBox! In most cases this is fine, but in rare cases it can default: prevent things such as shared folders from working properly. If you see default: shared folder errors, please make sure the guest additions within the default: virtual machine match the version of VirtualBox you have installed on default: your host and reload your VM. default: default: Guest Additions Version: 4.2.16 default: VirtualBox Version: 4.3 ==> default: Mounting shared folders... default: /vagrant => /Users/joel/Code/anybots/operations/robot/freebsd92-i386 Vagrant attempted to execute the capability 'mount_virtualbox_shared_folder' on the detect guest OS 'freebsd', but the guest doesn't support that capability. This capability is required for your configuration of Vagrant. Please either reconfigure Vagrant to avoid this capability or fix the issue by creating the capability. Note that I have recently installed the latest version of VirtualBox, but somehow I can't find the Guest Additions.

  Read the article

• Computer makes hissing noise, turns off after few seconds

  - by Kaustubh P

  I have a problem similar to the questions posted here and here. This is my config: Asus M3N78-EM, with AMD Phenom X3 720 2800 Black Edition, 4GB Transcend DDR2 RAM, Nvidia 9400GT. HD is a 160 GB IDE, and a LG IDE DVD-ROM. The power button is a bit off, I have removed the cover of the switch, and the only way it turns on is just giving the "stick" under the cover a gentle press. It turns on sometimes, and at other times, I have to cut-off the power from the PSU, and try again. I will describe my problem in as detail as possible, please bear with me: The problem has started in the last week, a few months after I changed the to the powerswitch arrangement as described above. The PC makes a hissing noise, and I wasn't able to pin-point the noise source, because of the various other fans. At first, removing the HD, rebooting w/o the HD, turning it off, reconnecting and booting made the problem go away. But of late, it doesn't happen. As suggested in the other questions, I tried reducing the load by disconnecting both the IDE drives, and the problem (noise + turn-off) still occurs. I also connected another 80G IDE HD,today morning, adn it still made that noise, and turned off. I also opened up the PSU, but I couldn't see any fault in that, I tried rotating the fan by blowing into the blades, and with my fingers, but the hissing noise didn't come from there. Or maybe the speed wasn't enough to evoke that noise. A few weeks ago: I had cleaned the Cabinet and had repasted the processor and its fan using some thermal paste. Could that be at fault? I also used a vacuum to blow the dust out of the PSU, could the power have been too much, to maybe offset the fan or something? A label on the PSU says it uses a ball-bearing fan. That only leaves me with the Processor fan and the processor itself. I didn't try removing the processor fan and processor from the motherboard, and then turning the PC on, fearing damage. Will doing so cause any damage? What can I do to localize and pin-point the problem? Also, after a few tries, the Computer starts up. Sometimes it turns of within 2 seconds, sometimes after the POST. Once it turned off at the grub. Another time it booted completely and then turned off. The only way to ensure that the PC wont turn off, is if the hissing noise stops. EDIT: I suspect it to be the Processor/Processor fan, owing to the source of noise. All the config, except for the Cabinet, is just over a year old. EDIT2: I also just remembered, that I had set the "On-power resume" to turn on, i.e. If I supply he PC with power, it will turn itself on, w/o me needing to press the switch. I had done that to workaround the faulty power-switch, as noted above. EDIT3: I calculated the power my system needs, from the antec site, and I just arrived at 292W

  Read the article

• Bridged virtual interface is not available or visible to ifconfig.

  - by Omniwombat

  Hello all. I'm running Ubuntu 9.04, kernel 2.6.28-18, and vmware-server 2.0.1. I'm attempting to setup a virtual linux machine to use a bridged interface rather than NAT or host-only. Both NAT and host-only work just fine. When running vmware-config.pl, I set /dev/vmnet0 to bridge eth0, /dev/vmnet1 to host-only, and /dev/vmnet8 to NAT. When I run ifconfig -a I see the physical interface (eth0), vmnet1 and vmnet8 both of which are up and have IP addresses assigned to them. I also see other various interfaces that are not relevant here. In the web console, when I ask that the guest machine's network card be bridged, it states that a bridged setup is "Not available" and shows the disabled device icon. Inside the guest machine, I do have an eth0 interface which I can set to anything I like, however it can't see my external network, or the host. I do see errors in my vmware/hostd.log which state: "The network bridge on device vmnet0 is not running. The virtual machine will not be able to communicate with the host or with other machines on your network" which confirms the problem. vmnet-bridge is running, and I see the following in my process table: /usr/bin/vmnet-bridge -d /var/run/vmnet-bridge-0.pid -n 0 -i eth0 I confirm that the /var/run/vmnet-bridge-0.pid file is there and that it points to the correct process. I saw this question relating to Ubuntu 9.04 and bridged interfaces, in which the poster determined that the vsock library was not getting built due to a flaw in the vmware-config.pl script. I applied the patch, reran the script, and confirm that vsock.ko and vsock.o are in my /lib directory structure. vsock does show up in an lsmod. My /etc/vmware directory has /vmnet1 and /vmnet8 subdirectories. They contain configuration utilities for running DHCP and nat type services as expected. There is no vmnet0 subdirectory. My /etc/vmware/netmap.conf file DOES show entries for vmnet0; both the name and the device as I configured it from the script. My /dev directory contains devices vmnet0 through vmnet9. They have major device number 119, and minor device numbers 0 through 9. /proc/net/dev shows statistics for vmnet1 and vmnet8, but not vmnet0. I have a /proc/vmnet directory, but it's empty. When I start or stop the vmware service with /etc/init.d/vmware start, I see the following: Starting VMware services: Virtual machine monitor done Virtual machine communication interface done VM communication interface socket family: done Virtual ethernet done Bridged networking on /dev/vmnet0 done Host-only networking on /dev/vmnet1 (background) done DHCP server on /dev/vmnet1 done Host-only networking on /dev/vmnet8 (background) done DHCP server on /dev/vmnet8 done NAT service on /dev/vmnet8 done VMware Server Authentication Daemon (background) done Shared Memory Available done Starting VMware management services: VMware Server Host Agent (background) done VMware Virtual Infrastructure Web Access Starting VMware autostart virtual machines: Virtual machines done Nothing appears to be wrong there. What n00b thing am I doing such that vmnet0 and only vmnet0 does not show up in the interface list?

  Read the article

• Trouble getting SSL to work with django + nginx + wsgi

  - by Kevin

  I've followed a couple of examples for Django + nginx + wsgi + ssl, but I can't get them to work. I simply get an error in my browser than I can't connect. I'm running two websites off the host. The config files are identical except for the ip addresses, server names, and directories. When neither use SSL, they work fine. When I try to listen on 443 with one of them, I can't connect to either. My config files are below, and any suggestions would be appreciated. server{ listen xxx.xxx.xxx.xxx:80; server_name sub.domain.com; access_log /home/django/logs/nginx_customerdb_http_access.log; error_log /home/django/logs/nginx_customerdb_http_error.log; location / { proxy_pass http://127.0.0.1:8080; proxy_redirect off; proxy_set_header Host $host; proxy_set_header X-Real-IP $remote_addr; proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; client_max_body_size 10m; client_body_buffer_size 128k; proxy_connect_timeout 90; proxy_send_timeout 90; proxy_read_timeout 90; proxy_buffers 32 4k; } location /site_media/ { alias /home/django/customerdb_site_media/; } location /admin-media/ { alias /home/django/django_admin_media/; } } server{ listen xxx.xxx.xxx.xxx:443; server_name sub.domain.com; access_log /home/django/logs/nginx_customerdb_http_access.log; error_log /home/django/logs/nginx_customerdb_http_error.log; ssl on; ssl_certificate sub.domain.com.crt; ssl_certificate_key sub.domain.com.key; ssl_prefer_server_ciphers on; location / { proxy_pass http://127.0.0.1:8080; proxy_redirect off; proxy_set_header Host $host; proxy_set_header X-Real-IP $remote_addr; proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; proxy_set_header X-Forwarded-Protocol https; client_max_body_size 10m; client_body_buffer_size 128k; proxy_connect_timeout 90; proxy_send_timeout 90; proxy_read_timeout 90; proxy_buffers 32 4k; } location /site_media/ { alias /home/django/customerdb_site_media/; } location /admin-media/ { alias /home/django/django_admin_media/; } } <VirtualHost *:8080> ServerName xxx.xxx.xxx.xxx ServerAlias xxx.xxx.xxx.xxx LogLevel warn ErrorLog /home/django/logs/apache_customerdb_error.log CustomLog /home/django/logs/apache_customerdb_access.log combined WSGIScriptAlias / /home/django/customerdb/apache/django.wsgi WSGIDaemonProcess customerdb_wsgi processes=4 threads=5 WSGIProcessGroup customerdb_wsgi SetEnvIf X-Forwarded-Protocol "^https$" HTTPS=on </VirtualHost> UDPATE: the existence of two sites (on separate IPs) on the host is the issue. if i delete the other site, the setting above mostly work. doing so also brings up another issue: chrome doesn't accept the site as secure saying that some content is not encrypted.

  Read the article

• apache webserver unresponsible with server-status showing all child processes waiting for connection

  - by Jeff

  My setup: i have 3 nearly identical webserver machines serving the same high loaded dynamic website with simple load balancing over dns. The service has been working for over two ears with the same apache config. apache2, php5, ubuntu 8.04 linux 2.6.24-29-server My problem: since about two weeks i'm experiencing problems with this config. Nearly every day i have one small moment about 5 minutes, in which the website is unreachable. I'm still able to login to the servers over ssh. If i run htop, i see the machine simply doing nothing. i have about 1000 apache processes running, but no cpu activity. i've used the apache mod_status to debug this situation. the process scoreboard looks like this: _C.___K_______________________R._______.__K_K____K___C_______.__ _______C__________.___________________________________.________C _.____K__________K___K_WK_____._K_____________________________._ W______K__________K________.____________________._______C_______ _C_.__K__K____.._.._____________________________________C_______ _R___________K___.______C________.C_________.______._____C______ ____________KKC____K_____K__WC_________________C_____.__.____.__ _____________________C_________K______.____C______._____________ _.___C____.___.___________________________.K______.____K________ W__.___________________C.__.____K________K_______R_._.__._______ __C__C_.__________C__C_______._____W______________C_.___C_______ ____.______C_____________C________.____C____________.________._K __.__________.K_____________K_________._____C____.K__________KW_ __K.W________R_________._______.___W___________.____.__K_____W__ W___.___..________W____K Scoreboard Key: "_" Waiting for Connection, "S" Starting up, "R" Reading Request, "W" Sending Reply, "K" Keepalive (read), "D" DNS Lookup, "C" Closing connection, "L" Logging, "G" Gracefully finishing, "I" Idle cleanup of worker, "." Open slot with no current process So the most of the processes are just waiting for connection. after about 5 minutes the situation will return to normal: i have lot least processes on every machine, the most workers have the "."-status (meaing they are open to process a request) and of course the website is reachable! so i'm trying to find something in the logs, but there is simply nothing... the apache access log is silent for about 4 minutes, the same is for the error log. i also can not figure out anything wrong in other system logs. the situation is the same on all 3 webservers (all of them have this load peak and unresposibility at the same time), so i do not thing this is hardware related. but i think, this might be related to some network (tcp) issue. any ideas? EDIT: some more information, that i have just discovered: it has just happened again. and i was able to verify that i'm also not able to connect locally when this problem occurs. i have made some connection statistics with the following command after it happend netstat -an|awk '/tcp/ {print $6}'|sort|uniq -c 109 CLOSE_WAIT 2652 ESTABLISHED 2 FIN_WAIT1 11 LAST_ACK 12 LISTEN 91 SYN_RECV 1 SYN_SENT 16 TIME_WAIT If i execute the same command some time later, i have something like this: 4 CLOSING 108 ESTABLISHED 18 FIN_WAIT1 182 FIN_WAIT2 37 LAST_ACK 12 LISTEN 50 SYN_RECV 11276 TIME_WAIT So in the normal situation i have only 100-200 open connections by clients beeing handled by apache in this moment. when i have this "crash", i have a lot more connections. what is the best way to analyse this? EDIT2: the important lines in apache2.conf are: KeepAlive On MaxKeepAliveRequests 20 KeepAliveTimeout 1 <IfModule mpm_prefork_module> ServerLimit 920 StartServers 30 MinSpareServers 80 MaxSpareServers 120 MaxClients 920 MaxRequestsPerChild 700 </IfModule> it is an apache2 prefork with php_mod. the server has 8GB ram and a 4gb swap partition.

  Read the article

• SSH Public Key Authentication only works if active session exists before

  - by Webx10

  I have a rather strange problem with my SSH configuration. I set up my server with the help of a Remote Access Card and configured everything with a KVM viewer. So while being logged into the server via the KVM Viewer I configured SSH with only pubkey and tried to login from my local laptop. It worked fine. If I quit the KVM Session (or logout with the user in the KVM session) I cannot login via ssh anymore (pubkey denied). SSH login only works as long as the user is somewhere still logged in. Any hints what the problem might be? Console output for a failed login (all personal data exchanged): OpenSSH_6.2p2, OSSLShim 0.9.8r 8 Dec 2011 debug1: Reading configuration data /Users/mylocaluser/.ssh/config debug1: Reading configuration data /etc/ssh_config debug1: /etc/ssh_config line 20: Applying options for * debug1: /etc/ssh_config line 103: Applying options for * debug1: Connecting to 100.100.100.100 [100.100.100.100] port 12345. debug1: Connection established. debug1: identity file /Users/mylocaluser/.ssh/id_rsa type 1 debug1: identity file /Users/mylocaluser/.ssh/id_rsa-cert type -1 debug1: identity file /Users/mylocaluser/.ssh/id_dsa type -1 debug1: identity file /Users/mylocaluser/.ssh/id_dsa-cert type -1 debug1: Enabling compatibility mode for protocol 2.0 debug1: Local version string SSH-2.0-OpenSSH_6.2 debug1: Remote protocol version 2.0, remote software version OpenSSH_6.6.1p1 Ubuntu-2ubuntu2 debug1: match: OpenSSH_6.6.1p1 Ubuntu-2ubuntu2 pat OpenSSH* debug1: SSH2_MSG_KEXINIT sent debug1: SSH2_MSG_KEXINIT received debug1: kex: server->client aes128-ctr [email protected] none debug1: kex: client->server aes128-ctr [email protected] none debug1: SSH2_MSG_KEX_DH_GEX_REQUEST(1024<1024<8192) sent debug1: expecting SSH2_MSG_KEX_DH_GEX_GROUP debug1: SSH2_MSG_KEX_DH_GEX_INIT sent debug1: expecting SSH2_MSG_KEX_DH_GEX_REPLY debug1: Server host key: RSA ab:12:23:34:45:56:67:78:89:90:12:23:34:45:56:67 debug1: Host '[100.100.100.100]:12345' is known and matches the RSA host key. debug1: Found key in /Users/mylocaluser/.ssh/known_hosts:36 debug1: ssh_rsa_verify: signature correct debug1: SSH2_MSG_NEWKEYS sent debug1: expecting SSH2_MSG_NEWKEYS debug1: SSH2_MSG_NEWKEYS received debug1: Roaming not allowed by server debug1: SSH2_MSG_SERVICE_REQUEST sent debug1: SSH2_MSG_SERVICE_ACCEPT received debug1: Authentications that can continue: publickey debug1: Next authentication method: publickey debug1: Offering RSA public key: /Users/mylocaluser/.ssh/id_rsa debug1: Authentications that can continue: publickey debug1: Offering RSA public key: /Users/mylocaluser/.ssh/id_rsa2 debug1: Authentications that can continue: publickey debug1: Trying private key: /Users/mylocaluser/.ssh/id_dsa debug1: No more authentication methods to try. Permission denied (publickey). Console output for a successfull login (only possible while "active session" exists): OpenSSH_6.2p2, OSSLShim 0.9.8r 8 Dec 2011 debug1: Reading configuration data /Users/mylocaluser/.ssh/config debug1: Reading configuration data /etc/ssh_config debug1: /etc/ssh_config line 20: Applying options for * debug1: /etc/ssh_config line 103: Applying options for * debug1: Connecting to 100.100.100.100 [100.100.100.100] port 12345. debug1: Connection established. debug1: identity file /Users/mylocaluser/.ssh/id_rsa type 1 debug1: identity file /Users/mylocaluser/.ssh/id_rsa-cert type -1 debug1: identity file /Users/mylocaluser/.ssh/id_dsa type -1 debug1: identity file /Users/mylocaluser/.ssh/id_dsa-cert type -1 debug1: Enabling compatibility mode for protocol 2.0 debug1: Local version string SSH-2.0-OpenSSH_6.2 debug1: Remote protocol version 2.0, remote software version OpenSSH_6.6.1p1 Ubuntu-2ubuntu2 debug1: match: OpenSSH_6.6.1p1 Ubuntu-2ubuntu2 pat OpenSSH* debug1: SSH2_MSG_KEXINIT sent debug1: SSH2_MSG_KEXINIT received debug1: kex: server->client aes128-ctr [email protected] none debug1: kex: client->server aes128-ctr [email protected] none debug1: SSH2_MSG_KEX_DH_GEX_REQUEST(1024<1024<8192) sent debug1: expecting SSH2_MSG_KEX_DH_GEX_GROUP debug1: SSH2_MSG_KEX_DH_GEX_INIT sent debug1: expecting SSH2_MSG_KEX_DH_GEX_REPLY debug1: Server host key: RSA ab:12:23:34:45:56:67:78:89:90:12:23:34:45:56:67 debug1: Host '[100.100.100.100]:12345' is known and matches the RSA host key. debug1: Found key in /Users/mylocaluser/.ssh/known_hosts:36 debug1: ssh_rsa_verify: signature correct debug1: SSH2_MSG_NEWKEYS sent debug1: expecting SSH2_MSG_NEWKEYS debug1: SSH2_MSG_NEWKEYS received debug1: Roaming not allowed by server debug1: SSH2_MSG_SERVICE_REQUEST sent debug1: SSH2_MSG_SERVICE_ACCEPT received debug1: Authentications that can continue: publickey debug1: Next authentication method: publickey debug1: Offering RSA public key: /Users/mylocaluser/.ssh/id_rsa debug1: Server accepts key: pkalg ssh-rsa blen 279 debug1: Authentication succeeded (publickey). Authenticated to 100.100.100.100 ([100.100.100.100]:12345). debug1: channel 0: new [client-session] debug1: Requesting [email protected] debug1: Entering interactive session. debug1: Sending environment. debug1: Sending env LANG = de_DE.UTF-8 Welcome to Ubuntu 14.04.1 LTS

  Read the article

• Why are my httpd mpm_prefork processes being reaped so quickly?

  - by Dan Pritts

  We've got a system running RHEL6, x64. We are using a local installation of apache 2.2.22 from source. we serve primarily: mod_perl applications (with a local installation of perl 5.16.0) tomcat applications proxied with mod_jk Here is some context; the main question is below. All of this talks to an Oracle backend. We are having issues with Oracle becoming unresponsive. We think this is because we're hitting the maximum process limit in oracle. We've upped the process limit, but now we are hitting memory pressure on the oracle server. We have tons of oracle sessions sitting idle. I can trace a bunch of them back to the httpd processes. We have mod_perl's Apache::DBI start up a new connection to the database with each httpd child that's spawned. We are concerned that these are not always getting closed out properly when the httpd's exit...and the httpd's are exiting very frequently. I know that it would be good to modify the mod_perl applications to use some better form of db connection pooling; we plan to pursue that but would like to solve our immediate problem sooner. So here's the main question. We are using the prefork MPM. The apache child processes are lasting at most a few minutes. Log analysis shows that each one is serving fewer than 50 clients before exiting; the last request each child serves is OPTIONS * HTTP/1.0 on some sort of internal connection; I'm under the impression that this is a "ping" from the master process. I've adjusted the MPM config as follows. I didn't want to raise MinSpareServers too high, because, after all, i'm trying to minimize the number of sessions to oracle. MinSpareServers 5 MaxSpareServers 30 MaxClients 150 MaxRequestsPerChild 10000 Right now we're serving 250-300 requests per minute. We've got 21 httpd's running, the eldest (other than the master, owned by root) being 3 minutes old. This rate of reaping of the apache children really seems excessive. What could be causing it? Apache was built with: $ ./configure --prefix=/opt/apache --with-ssl=/usr/lib --enable-expires --enable-ext-filter --enable-info --enable-mime-magic --enable-rewrite --enable-so --enable-speling --enable-ssl --enable-usertrack --enable-proxy --enable-headers --enable-log-forensic Apache config info: % /opt/apache/bin/httpd -V Server version: Apache/2.2.22 (Unix) Server built: Jul 23 2012 22:30:13 Server's Module Magic Number: 20051115:30 Server loaded: APR 1.4.5, APR-Util 1.4.1 Compiled using: APR 1.4.5, APR-Util 1.4.1 Architecture: 64-bit Server MPM: Prefork threaded: no forked: yes (variable process count) Server compiled with.... -D APACHE_MPM_DIR="server/mpm/prefork" -D APR_HAS_SENDFILE -D APR_HAS_MMAP -D APR_HAVE_IPV6 (IPv4-mapped addresses enabled) -D APR_USE_SYSVSEM_SERIALIZE -D APR_USE_PTHREAD_SERIALIZE -D SINGLE_LISTEN_UNSERIALIZED_ACCEPT -D APR_HAS_OTHER_CHILD -D AP_HAVE_RELIABLE_PIPED_LOGS -D DYNAMIC_MODULE_LIMIT=128 -D HTTPD_ROOT="/opt/apache" -D SUEXEC_BIN="/opt/apache/bin/suexec" -D DEFAULT_PIDLOG="logs/httpd.pid" -D DEFAULT_SCOREBOARD="logs/apache_runtime_status" -D DEFAULT_LOCKFILE="logs/accept.lock" -D DEFAULT_ERRORLOG="logs/error_log" -D AP_TYPES_CONFIG_FILE="conf/mime.types" -D SERVER_CONFIG_FILE="conf/httpd.conf" modules are compiled into apache rather than shared libs: % /opt/apache/bin/httpd -l Compiled in modules: core.c mod_authn_file.c mod_authn_default.c mod_authz_host.c mod_authz_groupfile.c mod_authz_user.c mod_authz_default.c mod_auth_basic.c mod_ext_filter.c mod_include.c mod_filter.c mod_log_config.c mod_log_forensic.c mod_env.c mod_mime_magic.c mod_expires.c mod_headers.c mod_usertrack.c mod_setenvif.c mod_version.c mod_proxy.c mod_proxy_connect.c mod_proxy_ftp.c mod_proxy_http.c mod_proxy_scgi.c mod_proxy_ajp.c mod_proxy_balancer.c mod_ssl.c prefork.c http_core.c mod_mime.c mod_status.c mod_autoindex.c mod_asis.c mod_info.c mod_cgi.c mod_negotiation.c mod_dir.c mod_actions.c mod_speling.c mod_userdir.c mod_alias.c mod_rewrite.c mod_so.c One final note - the red hat httpd, apr, and perl packages are all installed, but ldd shows that none of those libraries are linked with the running httpd.

  Read the article

• Email sent from Centos end up in user spam folder

  - by oObe

  I am facing this issue, I use the default postfix MTA in centos but the mail end up in user spam folder, but this does not seem to be a problem in Debian using exim4, both host have hostname and domain name configured, and relay mail through external smtp host. Both configuration and recieving email header are attached. The different seems that Debian has this additional (envelope tag) and (from) tag other than some minor syntax differences. Any help to resolve is appreciated. The IP address and DNS is masked as follow: 1.2.3.4 = My IP address smtp.host.com = external smtp host for my company [email protected] = account at smtp host centos.abc.com = Local centos server debian.abc.com = Local debian server Thanks. Centos main.cf config with the following params configured myhostname = centos.abc.com mydomain = abc.com myorigin = centos.abc.com relayhost = smtp.host.com Centos - User receiving mail header Return-Path: <[email protected]> Received: from 1.2.3.4 [1.2.3.4] by smtp.host.com with SMTP; Thu, 27 Sep 2012 13:36:49 +0800 Received: by centos.abc.com (Postfix, from userid 0) id 1E0637B89; Fri, 28 Sep 2012 13:36:39 +0800 (SGT) Return-Path: <[email protected]> Received: from 1.2.3.4 [1.2.3.4] by smtp.host.com with SMTP; Thu, 27 Sep 2012 13:36:49 +0800 Received: by centos.abc.com (Postfix, from userid 0) id 1E0637B89; Fri, 28 Sep 2012 13:36:39 +0800 (SGT) Date: Fri, 28 Sep 2012 13:36:39 +0800 To: [email protected] Subject: Test mail from centos User-Agent: Heirloom mailx 12.4 7/29/08 MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Message-Id: <[email protected]> From: [email protected] (root) X-SmarterMail-TotalSpamWeight: 0 X-Antivirus: avast! (VPS 120926-1, 27/09/2012), Inbound message X-Antivirus-Status: Clean http://i.imgur.com/7WAYX.jpg Debain exim4 config .... # This is a Debian specific file dc_eximconfig_configtype='smarthost' dc_other_hostnames='debian.abc.com' dc_local_interfaces='127.0.0.1 ; ::1' dc_readhost='debian.abc.com' dc_relay_domains='smtp.host.com' dc_minimaldns='false' dc_relay_nets='127.0.0.1' dc_smarthost='smtp.host.com' CFILEMODE='644' dc_use_split_config='false' dc_hide_mailname='true' dc_mailname_in_oh='true' dc_localdelivery='mail_spool' debian - User receiving mail header Return-Path: <[email protected]> Received: from 1.2.3.4 [1.2.3.4] by smtp.host.com with SMTP; Thu, 27 Sep 2012 15:02:53 +0800 Received: from root by debian.abc.com with local (Exim 4.72) (envelope-from <[email protected]>) id 1TH86d-00010v-G9 for [email protected]; Thu, 27 Sep 2012 15:01:55 +0800 Return-Path: <[email protected]> Received: from 1.2.3.4 [1.2.3.4] by smtp.host.com with SMTP; Thu, 27 Sep 2012 15:02:53 +0800 Received: from root by debian.abc.com with local (Exim 4.72) (envelope-from <[email protected]>) id 1TH86d-00010v-G9 for [email protected]; Thu, 27 Sep 2012 15:01:55 +0800 Date: Thu, 27 Sep 2012 15:01:55 +0800 Message-Id: <[email protected]> To: [email protected] Subject: Test from debian From: root <[email protected]> X-SmarterMail-TotalSpamWeight: 0 X-Antivirus: avast! (VPS 120926-1, 27/09/2012), Inbound message X-Antivirus-Status: Clean http://imgur.com/nMsMA.jpg

  Read the article

• Proliant server will not accept new hard disks in RAID 1+0?

  - by Leigh

  I have a HP ProLiant DL380 G5, I have two logical drives configured with RAID. I have one logical drive RAID 1+0 with two 72 gb 10k sas 1 port spare no 376597-001. I had one hard disk fail and ordered a replacement. The configuration utility showed error and would not rebuild the RAID. I presumed a hard disk fault and ordered a replacement again. In the mean time I put the original failed disk back in the server and this started rebuilding. Currently shows ok status however in the log I can see hardware errors. The new disk has come and I again have the same problem of not accepting the hard disk. I have updated the P400 controller with the latest firmware 7.24 , but still no luck. The only difference I can see is the original drive has firmware 0103 (same as the RAID drive) and the new one has HPD2. Any advice would be appreciated. Thanks in advance Logs from server ctrl all show config Smart Array P400 in Slot 1 (sn: PAFGK0P9VWO0UQ) array A (SAS, Unused Space: 0 MB) logicaldrive 1 (68.5 GB, RAID 1, Interim Recovery Mode) physicaldrive 2I:1:1 (port 2I:box 1:bay 1, SAS, 73.5 GB, OK) physicaldrive 2I:1:2 (port 2I:box 1:bay 2, SAS, 72 GB, Failed array B (SAS, Unused Space: 0 MB) logicaldrive 2 (558.7 GB, RAID 5, OK) physicaldrive 1I:1:5 (port 1I:box 1:bay 5, SAS, 300 GB, OK) physicaldrive 2I:1:3 (port 2I:box 1:bay 3, SAS, 300 GB, OK) physicaldrive 2I:1:4 (port 2I:box 1:bay 4, SAS, 300 GB, OK) ctrl all show config detail Smart Array P400 in Slot 1 Bus Interface: PCI Slot: 1 Serial Number: PAFGK0P9VWO0UQ Cache Serial Number: PA82C0J9VWL8I7 RAID 6 (ADG) Status: Disabled Controller Status: OK Hardware Revision: E Firmware Version: 7.24 Rebuild Priority: Medium Expand Priority: Medium Surface Scan Delay: 15 secs Surface Scan Mode: Idle Wait for Cache Room: Disabled Surface Analysis Inconsistency Notification: Disabled Post Prompt Timeout: 0 secs Cache Board Present: True Cache Status: OK Cache Status Details: A cache error was detected. Run more information. Cache Ratio: 100% Read / 0% Write Drive Write Cache: Disabled Total Cache Size: 256 MB Total Cache Memory Available: 208 MB No-Battery Write Cache: Disabled Battery/Capacitor Count: 0 SATA NCQ Supported: True Array: A Interface Type: SAS Unused Space: 0 MB Status: Failed Physical Drive Array Type: Data One of the drives on this array have failed or has Logical Drive: 1 Size: 68.5 GB Fault Tolerance: RAID 1 Heads: 255 Sectors Per Track: 32 Cylinders: 17594 Strip Size: 128 KB Full Stripe Size: 128 KB Status: Interim Recovery Mode Caching: Enabled Unique Identifier: 600508B10010503956574F305551 Disk Name: \\.\PhysicalDrive0 Mount Points: C:\ 68.5 GB Logical Drive Label: A0100539PAFGK0P9VWO0UQ0E93 Mirror Group 0: physicaldrive 2I:1:2 (port 2I:box 1:bay 2, S Mirror Group 1: physicaldrive 2I:1:1 (port 2I:box 1:bay 1, S Drive Type: Data physicaldrive 2I:1:1 Port: 2I Box: 1 Bay: 1 Status: OK Drive Type: Data Drive Interface Type: SAS Size: 73.5 GB Rotational Speed: 10000 Firmware Revision: 0103 Serial Number: B379P8C006RK Model: HP DG072A9B7 PHY Count: 2 PHY Transfer Rate: Unknown, Unknown physicaldrive 2I:1:2 Port: 2I Box: 1 Bay: 2 Status: Failed Drive Type: Data Drive Interface Type: SAS Size: 72 GB Rotational Speed: 15000 Firmware Revision: HPD9 Serial Number: D5A1PCA04SL01244 Model: HP EH0072FARUA PHY Count: 2 PHY Transfer Rate: Unknown, Unknown Array: B Interface Type: SAS Unused Space: 0 MB Status: OK Array Type: Data Logical Drive: 2 Size: 558.7 GB Fault Tolerance: RAID 5 Heads: 255 Sectors Per Track: 32 Cylinders: 65535 Strip Size: 64 KB Full Stripe Size: 128 KB Status: OK Caching: Enabled Parity Initialization Status: Initialization Co Unique Identifier: 600508B10010503956574F305551 Disk Name: \\.\PhysicalDrive1 Mount Points: E:\ 558.7 GB Logical Drive Label: AF14FD12PAFGK0P9VWO0UQD007 Drive Type: Data physicaldrive 1I:1:5 Port: 1I Box: 1 Bay: 5 Status: OK Drive Type: Data Drive Interface Type: SAS Size: 300 GB Rotational Speed: 10000 Firmware Revision: HPD4 Serial Number: 3SE07QH300009923X1X3 Model: HP DG0300BALVP Current Temperature (C): 32 Maximum Temperature (C): 45 PHY Count: 2 PHY Transfer Rate: Unknown, Unknown physicaldrive 2I:1:3 Port: 2I Box: 1 Bay: 3 Status: OK Drive Type: Data Drive Interface Type: SAS Size: 300 GB Rotational Speed: 10000 Firmware Revision: HPD4 Serial Number: 3SE0AHVH00009924P8F3 Model: HP DG0300BALVP Current Temperature (C): 34 Maximum Temperature (C): 47 PHY Count: 2 PHY Transfer Rate: Unknown, Unknown physicaldrive 2I:1:4 Port: 2I Box: 1 Bay: 4 Status: OK Drive Type: Data Drive Interface Type: SAS Size: 300 GB Rotational Speed: 10000 Firmware Revision: HPD4 Serial Number: 3SE08NAK00009924KWD6 Model: HP DG0300BALVP Current Temperature (C): 35 Maximum Temperature (C): 47 PHY Count: 2 PHY Transfer Rate: Unknown, Unknown

  Read the article

< Previous Page | 204 205 206 207 208 209 210 211 212 213 214 215  | Next Page >