Search Results

Search found 26524 results on 1061 pages for 'laptop display'.

Page 208/1061 | < Previous Page | 204 205 206 207 208 209 210 211 212 213 214 215  | Next Page >

• Is a VPN a good method for protecting data in an untrusted network? [closed]

  - by john

  I will be connecting my laptop in an untrusted network. If I setup OpenVpn on a server and use a vpn client on the laptop to connect through it, is it enough? Can someone perform a MITM attack or otherwise eavesdrop on my traffic? If someone on the local network port-scans my laptop, will the open ports be accessible to him while I use the VPN tunnel? Is there anything else I should keep in mind?

  Read the article

• The volume "filesystem root" has only 0 bytes disk space remaining?

  - by radek

  I installed 11.10 ~two weeks ago and run into some strange troubles recently. Installation was on brand new laptop with clear 128GB SSD. I opted for encrypting home directory. Apart from that I accepted defaults during the installation. There is no other OS on my laptop. I had circa 40GB in use when (for the third time) I got to see this very unpleasant window: Twice situation was pretty bad and whole system slowed down considerably. After reboot I could not login to graphical interface (with an error message informing about insufficient space) and had to remove some files from command line first. Third time I still managed to quickly delete some files and it helped. My laptop is mainly work environment: so no torrents, games, just two movies. Only media filling space are ~20GB of pictures, and bunch of pdfs. Working mostly on PostgreSQL & PostGIS, GeoServer and QGIS recently. Although I had lots of opportunities to test and practice my backups I would be extremely grateful if somebody could point me to any potential solutions to this problem. My laptop has been bought just before I installed Ubuntu, and it came without OS. Could that be hardware issue? Or is the encrypted home causing me headaches? Thanks for help! Update: As suggested by @maniat1k, here is current output of fdisk -l: WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util fdisk doesn't support GPT. Use GNU Parted. Disk /dev/sda: 160.0 GB, 160041885696 bytes 255 heads, 63 sectors/track, 19457 cylinders, total 312581808 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Device Boot Start End Blocks Id System /dev/sda1 1 312581807 156290903+ ee GPT

  Read the article

• sshfs with fstab: connection reset by peer

  - by user171348

  I am trying to allow my laptop (Ubuntu 13.04) to access my PC (Lubuntu 13.04) hard drive through SSHFS. I'm using RSA keys to connect. It works perfectly fine if I type this in the terminal: sshfs my-PC:/a_folder /media/a_folder But I would like it to be mounted automatically when I boot my laptop. So I added myself to the fuse group: sudo adduser mynickname fuse And I added the following line to my fstab file: sshfs#mynickname@my-PC:/a_folder /media/a_folder fuse defaults,idmap=user,_netdev 0 0 When I boot the laptop, a_folder appears in the list of devices, but is not mounted. When I try to access it through Nautilus, it displays the following error: mount: only root can mount sshfs#mynickname@my-PC:/a_folder on /media/a_folder I get the same error if I try mount /media/a_folder in a terminal. If I try sudo mount /media/a_folder I get read: Connection reset by peer I tried to add "allow_other" as an option in the fstab entry, and uncommented the related line in /etc/fuse.conf, but it didn't change anything. The user "mynickname" is the owner of the folder /media/a_folder and has rwx permissions. I looked at many threads on the internet about people with quite similar issues, but nothing worked so far. Usually, people can't even do sshfs my-PC:/a_folder /media/a_folder without getting an error, whereas this works fine on my laptop. Any insight and tips will be greatly appreciated! Thanks.

  Read the article

• Cannot connect my Ubuntu to TV with HDMI

  - by Hannes Johannes

  Another problem in my way to Ubuntu world.. Trying to make things work Linux way, day 4, problem #5321: I have a Compaq laptop and Nvidia graphic adapter. I also have Panasonic TV, which I thought I could use as a second screen just like I used to to when I was still using Windows Vista with my laptop. Plug the screen to the comp and voilá, I can watch my videos on big screen. And a boll***s I can, not with ubuntu anyways. Nvidia x server (or whatever it's called) does recognize my tv. It's very badly designed gui as I can never be sure has it saved my changes or not (most often not), but I recon I've got that one sorted out. I haven't found a way to set a primary monitor there, but it does see there are two monitors, my laptop and the tv. So far so good. But then? Ubuntu's own monitor setting only sees the laptop screen. If I reboot (with the HDMI cable connected) I end up having a black screen. Then I have to take the cable away, cut the power off and restart the comp.. Please, help, any help would be appreciated! I would so much love to like this linux more than windows but it surely takes a lot of trying...

  Read the article

• Plugged in Not Charging.

  - by Eric Johnson

  Suggested steps to fix the nasty Windows power management issue of plugged in not charging. Option 1: Disconnect AC Shutdown Remove battery Connect AC Startup Under the Batteries category, right-click all of the Microsoft ACPI Compliant Control Method Battery listings, and select Uninstall (it’s ok if you only have 1). Shutdown Disconnect AC Insert battery Connect AC Startup Option 2: Turn off laptop. Unplug AC power. Remove battery. Replace AC power. Turn on laptop, allow OS to boot. Once logged in to the machine, perform a normal shut down. Unplug AC power. Replace battery. Replace AC power. Turn on laptop, allow OS to boot. The battery should once again be charging as normal Additional troubleshooting techniques: Check battery charging status in the BIOS Update BIOS Replace Battery (I did this and the new battery is not charging) See if the battery charging light works when the laptop is powered down. Supporting Links: http://jeffreypalermo.com/blog/plugged-in-not-charging-windows-7-solution/ http://social.technet.microsoft.com/Forums/en/itprovistahardware/thread/741398c6-a733-482c-a33c-2b61d9bc2984 http://www.youtube.com/watch?v=6Xf-ipP0wSY&feature=fvw

  Read the article

• Installer gets stuck with a grayed out forward button.

  - by TRiG

  I have a CD with Ubuntu 10.10 and a laptop with Ubuntu 8.10. The laptop had all sorts of crud on it, and anything I wanted to keep was backed up on an external drive, so I was happy to do a wipe and reinstall instead of an update. So after a bit of faffing about trying to work out how to get the thing to boot from the CD drive, I did that. So the screen comes up with the choice: the options are Try Ubuntu and Install Ubuntu. I choose to install and to overwrite my current installation. So far so good. I then get a progress bar labelled something like copying files (I forget the exact wording) and further options to fill in for my location, keyboard locale, username and password. On each of these screens there are forward and back buttons. On the last screen (password), the forward button is greyed out. Well, I think to myself, no doubt it will become active when that copying files progress bar completes. The progress bar never completes. It hangs. And the label changes from copying files to the chirpy ready when you are. The forward button remains greyed out. The back button is as unhelpful as you'd expect it to be. And there's nothing else to click. We have reached an impasse. I tried restarting the laptop, to test whether it actually was properly installed. It wasn't. I tried to run Ubuntu live from the CD, to test whether the disk was damaged. That wouldn't work either, but I suspect it's just because the laptop is old and has a slow disk drive. I'm typing this question on another computer using the Ubuntu live CD and it's working fine. So there's nothing wrong with the CD.

  Read the article

• HP Notebook Pavilion g6-2101sl freeze

  - by StErMi

  I just bought this notebook and I've already installed in a new partition Ubuntu 12.04 LTS with 6gb of swap memory. UPDATE2: This is the laptop configuration: http://h10025.www1.hp.com/ewfrf/wc/document?cc=it&lc=it&dlc=it&tmp_geoLoc=true&docname=c03397517 Sometimes (without any special conditions) Ubuntu freezes. My mouse is blocked, the UI is blocked, ALT+F1 to kill something or to restart is blocked, I can't really do anything... I've also tried and it freezes with: Ubuntu 3D Ubuntu 2D Gnome Shell and it freezes both with low and high load. I can only press on power button (physically) and restart my laptop (and this is not the correct way to do things). I'm using this laptop for work, so I need a stable OS without this freeze. Someone knows how to solve this problem? UPDATE: /var/log/messages is empty /var/log/kernel.log - http://paste.ubuntu.com/1220182/ /var/log/Xorg.0.log - http://paste.ubuntu.com/1220186/ I just installed propetary driver from ATI, it crash anyway. This morning I started laptop, I enabled wireless, opened dropbox and chrome - freeze. When it freeze I cannot: Do ctrl+alt+f1 to get console access AltF2 + r to reload session Alt+Print + RESUB to restart I totally freezed.

  Read the article

• Remote server's x menus without vino, vnc etc

  - by Fredde

  A question where both google searches, as well as askubuntu and ubuntu forums searches fails though rephrasing the question a number of times. Have a Lubuntu server with some storage and functions and a lubuntu laptop. Previous when running winXP, I had Xming, could start a x-session on the server, got the lxpanel on the laptop, switching, running x-programs without a hitch though the lxpanel menu. A very neat and convenient solution. However the winXP crashed, me moving to lubuntu also for the laptop. still things work, I ssh into the server and can start x-programs without a hitch. But, as with all graphical desktops, I at times need access to the lx menus on the server to find programs and here the problems arise, most finding I got talk about installing VNC, vino etc overkills, avoiding existing X-integration between the servers. I'll like to do as I did with Xming, see the menu system on the server, in my "client's" xwin? Just to see the servers installed software without colliding with the laptop X-server, just using it as normal X-apps.

  Read the article

• HP Pavilion 15 with AMD dual graphics - Ubuntu live environment not starting

  - by creepus

  I've had this laptop for about a day now and have decided to try Ubuntu on it and determine if I want to install it. I created a USB, it booted (Secure Boot was on, I tried with Secure Boot off to no effect), and then the problem occurred. The screen turned off for a second, turned back on to a black screen, shut off again and turned back on with a dialogue box telling me that the system had to use low-graphics mode. I clicked OK, selected low-graphics mode from the menu and clicked OK. The screen switched to the boot messages and did not go any further than this. Ctrl+Alt+DEL started rebooting the laptop though. I tried booting again, but this time I edited the boot options in GRUB to add nomodeset. This time, the laptop only booted to a black screen. Ctrl+Alt+F2 took me to a prompt, I tried startx from there, but X didn't start, complaining that it wanted kernel mode setting back. I can not seem to find any option to disable one graphics chip or the other in the UEFI setup menus. Laptop : HP Pavilion 15-E004AU. The CPU : AMD A6-4400M APU with Radeon(tm) HD Graphics The graphics chip : AMD Radeon HD 7520G + 8670M Dual Graphics. The Ubuntu version : 13.10, 64 bit. Thanks. EDIT: I tried 12.04.3 LTS, it managed to bring the desktop up. There are severe graphics glitches after about two minutes though.

  Read the article

• Botting from a stick drive

  - by Zap

  Am trying to boot from a usb stick. Have carefully followed the instructions at the following link and successfully downloaded and installed version Ubuntu 12.04 desk top: http://www.ubuntu.com/download/help/create-a-usb-stick-on-windows I used the Universal-USB-Installer-1.9.0.2 as instructed and choose the "Ubuntu 12.04 desk top" option, after downloading the respective iso/zip file onto my Dell laptop from the Ubuntu site. Also modified my bios to select the usb first as boot drive instead of hard drive. Also, turned off bit blocker on my laptop and usb stick. Usb stick has the setting of "Automatically unlock this drive on this computer". When i reboot my laptop, it first boots into a black screen (i assume is the bios), but prompts saying "Remove disks or other media. Press any key to start". I press any key and regardless the laptop boots up to windows. Hence, it appears that the boot process is checking the USB first before going to the hard drive to look for it's boot disk and starting Windows 7. Is it that the USB stick is not correctly configured with Ubuntu as a boot disk? Is there anything else that i need to do besides the instructions at the following link? http://www.ubuntu.com/download/help/create-a-usb-stick-on-windows How can I ensure that USB boot stick is configured correctly? After running the Universal-USB-Installer-1.9.0.2 to "install" Ubuntu, is there additional configuration/installation steps? What is the first file that the bios would look for on this USB drive? Is this configured somewhere in the bios, or would it just look for an grub file or /boot dir? The only message i get when booting is "Remove disks or other media. Press any key to start". Any and all help would be much appreciated.. Thanks ... :)

  Read the article

• invitation: Oracle Endeca Information Discovery Bootcamp

  - by mseika

  The Oracle Endeca Information Discovery (OEID) Boot Camp is designed to give partners an understanding of OEID’s features, and how it complements the existing Oracle Business Intelligence suite. Participants will learn how to develop & implement solutions using a Data Discovery method. Training is in EnglishWhat will be covered?The Oracle Endeca Information Discovery (OEID) Boot Camp is a three-day class with a combination of lecture and hands-on exercises, tailored to make participants aware of the Oracle Endeca Information Discovery platform, and to gain valuable skills for the implementation of projects.The course will follow a combination of lectures and hands-on lab sessions, to allow participants to apply the knowledge they have gained by extracting from sample data sources, and creating an end-user application that will be used to answer several business questions. What You Will Learn Architecture: OEID Components, use of graphs, overview of clustering OEID Installation: Architecture planning, infrastructure requirements, installation process, production hints & tips OEID Administration: Data store management, administrative operations, portal configuration, data sources, system monitoring Indexing: Integration Suite, Data source analysis, Graph (ETL) creation, record design techniques Portlets: Studio portlets, custom portlet development, querying functions Reporting: Studio applications & best practices, visualizations, EQL PrerequisitesYou must bring a laptop with you for the Hands-on labs ENVIRONMENT – LAPTOP REQUIREMENTS For the OEID boot camp, participants will perform the hands-on lab exercises using a virtual machine image. These virtual machines will be provided to participants within a cloud environment, requiring participants to bring a laptop to the Boot Camp that can access a Windows server utilizing Microsoft RDP from their laptop. Participants will not need to install any software onto their laptops, but must ensure that they have the proper software installed for their OS, to connect through RDP to a server. HARDWARE • CPU: Dual-core, x64, 1.8Ghz or higher • RAM: 2GB SOFTWARE • Microsoft Remote Desktop Client • Internet Explorer 7, Firefox, or Google Chrome This boot camp is intended for prospective implementers of Oracle Endeca Information Discovery (OEID), or those in a presales role looking to gain insight into the technical benefits of this new package. Attendees should have experience and familiarity with the basic concepts of business intelligence. Where and When ? Monday, October 15th until wednesday, October 17th included 9:00 - 18:00 Oracle France 15, boulevard Charles de Gaulle 92715 Colombes Access Register Here Limited number of seats !

  Read the article

• Effect of using dedicated NVidia card instead of Intel HD4000

  - by Sman789

  Short version: Can someone please advise me of the effect of adding a dedicated NVIDIA GeForce GT 630M card to an Ubuntu laptop in terms of power consumption and performance gains/losses when doing general productivity tasks and booting up. Also, how good are the closed source, open source, and Bumblebee drivers for these newer cards compared to support for the Intel HD4000? Long version/Background, if any info here is helpful: I'm thinking of ordering a laptop from PC Specialist (a UK company who actually sell machines without Windows pre-installed) with the following specifications: Genesis IV: 15.6" AUO Matte 95% Gamut LED Widescreen (1920x1080) Intel® Core™i5 Dual Core Mobile Processor i5-3210M (2.50GHz) 3MB 4GB SAMSUNG 1600MHz SODIMM DDR3 MEMORY (1 x 4GB) 120GB INTEL® 520 SERIES SSD, SATA 6 Gb/s (upto 550MB/sR | 520MB/sW) Intel 2 Channel High Definition Audio + MIC/Headphone Jack GIGABIT LAN & WIRELESS INTEL® N135 802.11N (150Mbps) + BLUETOOTH Now, as I want this laptop mainly for work and not for games, I would be more than content with the HD4000 integrated chip which comes with the processor. However, for compatibility reasons, I am not able to get the specs I want unless I choose a NVIDIA GeForce GT 630M 1GB graphics card, which I don't have a great deal of use for. I'm willing to buy it, however, as it's still cheaper than any other laptop with the specs I want. However, I know that Linux power management isn't fantastic with open-source graphics drivers, and I don't much about Bumblebee. Basically, whilst I'm happy to 'tolerate' the card being there, I don't want to experience any negative effects on the rest of my system (battery, performance etc) and if there are likely to be any, I might reconsider my purchase. So if anyone can advise me on the effects, I would be very grateful, since I doubt I can just turn the card off. Thankyou for any assistance :)

  Read the article

• External monitor problems with Asus UX32VD in 12.04

  - by rsilva

  I've posted this video where I show one of the problems I'm facing with my UX32VD in regard of external monitors. As you can see as soon as I plugged the external monitor the laptop screen goes black and the external monitor displays a single color (color changes between red, green and blue). However this does not always happen. For instance if I reboot the laptop with the external monitor already plugged in I get to use it but not the laptop screen. In the Displays settings the laptop screen it's not even listed. Other times it just works. The to screens, without any problems. I tried with other to different external monitor and all this apparently random issues repeat, I even tried using HDMI cable instead. Same random behavior. This question seams to cover one of this issues however the answer did not helped me. I was forced to use the 3.5.2 kernel in order to use the Intel graphics card else the Gallium something was used. Also I've Bumblebee installed.

  Read the article

• Acer Aspire 5542G overheating with ubuntu/kubuntu 12.04

  - by james

  I have an Acer Aspire 5542G laptop purchased couple of years ago. All these days, i used windows 7 on it . Then I tried ubuntu 12.04 . Everything was fine except the overheating issue. I updated ubuntu with all security fixes and available updates but nothing solved the problem. With idle use like internet browsing, the cpu fan speeds up a lot and i can feel very hot air coming from the vent (comparable to playing serious 3d game in windows). But it will not go to a point of freeze and shutdown. But as long as im using it, with no intensive tasks at all, the laptop stays too hot. This wasn't the case with windows7. In windows 7 the fan will not rotate at all with normal use. I heard there was manufacturing defect with some acer laptops, but i think it wasn't the case with my laptop since windows7 runs perfectly. I updated the bios to latest version. I cleaned dust in the vents. I tried kubuntu 12.04 up-to-date. Nothing solved the issue. My laptop specs are: CPU : AMD turion2 x2 M500 @ 2.2GHz GPU : AMD Mobility Radeon HD4570 3GB RAM and 320GB hard disk.

  Read the article

• Live CD installer gets stuck with a grayed out forward button.

  - by TRiG

  I have a CD with Ubuntu 10.10 and a laptop with Ubuntu 8.10. The laptop had all sorts of crud on it, and anything I wanted to keep was backed up on an external drive, so I was happy to do a wipe and reinstall instead of an update. So after a bit of faffing about trying to work out how to get the thing to boot from the CD drive, I did that. So the screen comes up with the choice: the options are Try Ubuntu and Install Ubuntu. I choose to install and to overwrite my current installation. So far so good. I then get a progress bar labelled something like copying files (I forget the exact wording) and further options to fill in for my location, keyboard locale, username and password. On each of these screens there are forward and back buttons. On the last screen (password), the forward button is greyed out. Well, I think to myself, no doubt it will become active when that copying files progress bar completes. The progress bar never completes. It hangs. And the label changes from copying files to the chirpy ready when you are. The forward button remains greyed out. The back button is as unhelpful as you'd expect it to be. And there's nothing else to click. We have reached an impasse. I tried restarting the laptop, to test whether it actually was properly installed. It wasn't. I tried to run Ubuntu live from the CD, to test whether the disk was damaged. That wouldn't work either, but I suspect it's just because the laptop is old and has a slow disk drive. I'm typing this question on another computer using the Ubuntu live CD and it's working fine. So there's nothing wrong with the CD.

  Read the article

• USB Keyboard works occasionally

  - by palimmo

  A few days ago I bought a SL640 Hama USB keyboard to use on my laptop with Ubuntu 12.04. But I'm having problems, as it works one time out of 10! While on my girlfriend's laptop, with Win Vista, always works. And on my laptop I have Win7 in dual boot. And I have to say that it always works on it. Here are some infos: ~$ lsusb Bus 006 Device 003: ID 04d9:1503 Holtek Semiconductor, Inc. Shortboard Lefty As you can see, the OS recognized it but the keyboard doesn't react ... even the Caps Lock and Num Lock keys don't blink. Regarding the legacy support (useful for GRUB), I have found no entry in the BIOS. But I'm not interested in it. I just want to use it in Ubuntu. However, in GRUB it works sometimes. Surprisingly, now I have booted my laptop: the usb keyboard hasn't worked in GRUB but it has worked since the ubuntu login! And now I'm typing with it. Well.. it means that Ubuntu has the right drivers and they work. But how to "load" them always correctly? thanks in advance!

  Read the article

• Ubuntu 12.04 gets overheated, whereas I have no heating problems on Windows 7 whatsoever

  - by G K

  I bought a new laptop which came pre-installed with Windows 7. I love working on Ubuntu and hence installed it. I can work on Windows for 6 hours at a stretch and feel the laptop being only slightly warm, but 15 minutes into running Ubuntu and my laptop is too hot. The battery also drains out very quickly on Ubuntu. 1.5 hrs of backup on Ubuntu compared to 5-6 hrs on Windows. I previously owned a Dell Inspiron N5010 and everything ran smoothly on that. No heating issues. It came with intel i3 processor. So I'm wondering whether this problem has something to do with the processor? (AMD A8) Specs: HP Pavilion G6-2005AX Laptop (APU Quad Core A8/ 4GB/ 500GB/ Win7 HB/ 1.5GB Graph) 1 GB AMD Radeon HD 7670M Dedicated 512 MB AMD Radeon HD 7640G Graphics Integrated Is there any fix for this problem? Thanks in advance. Edit: I've installed ATI proprietary drivers suggested by Ubuntu.

  Read the article

• Tilt issue in Blackberry storm

  - by sujithRavindran

  Hi, have developed an app for BB storm while tilting the device the background image of the app screen does not matches with the screen size , i have tried with the sublayout methord public void sublayout(int width, int height) { //update scrren layout based on orientation if(Display.getOrientation()== Display.ORIENTATION_LANDSCAPE) { invalidate(); } else if(Display.getOrientation()== Display.ORIENTATION_PORTRAIT) { invalidate(); } super.sublayout(width, height); } Still not successfull can any one help to sort out this tilt issue in BB storm Thanks SujithRavindran Rapidvaluesolutions

  Read the article

• Blackberry storm - update layout on tilt

  - by sujithRavindran

  Hi, have developed an app for BB storm while tilting the device the background image of the app screen does not matches with the screen size, i have tried with the sublayout method public void sublayout(int width, int height) { //update scrren layout based on orientation if(Display.getOrientation()== Display.ORIENTATION_LANDSCAPE) { invalidate(); } else if(Display.getOrientation()== Display.ORIENTATION_PORTRAIT) { invalidate(); } super.sublayout(width, height); } Still not successfull can any one help to sort out this tilt issue in BB storm Thanks SujithRavindran Rapidvaluesolutions

  Read the article

• Format boolean column in MVCContrib grid

  - by Ghecco

  HI, I am using the MVCContrib grid and I would like to display images depending on the values of a column, e.g.: if the column's value is null display the image "<img src="true.gif">" otherwise display the image "<img src="false.gif"> Furthermore I would also need (this should be the same approeach I think) to display different actions depending on the column's/rows' value ... Thanks in advance for your answers! Best regards Stefan

  Read the article

• DRUPAL probl [tid] field : in View how to link Taxonomy term to MY view (and not to taxonomy/term)

  - by davezen

  SUMMARY : I have a view where I need to replace the term link "taxonomy/term" by my view link, because the view uses arguments to find content with terms how can I put in link argument the term which is display : [term_name1] link "display_view/term_name1", [term_name2] link "display_view/term_name2" I used [tid] field to put argument in link display_view/[tid] but it only display the first term, and not the real term (for example if multiple taggs it only display the first) and put all the terms in one single link : [term_name1 term_name2] link "display_view/term_name1" so why [tid] or [tid_1] don't run ? is there another field, or do I need php ? really need help ! :) DESCRIPTION : Hello, I made a view table to display store content it display : user name, title, taxonomy term to type (book, disc...), taxonomy term for taggs (subject of objects) for example : USER | TITLE | TERM TYPE (only one) | TERM SUBJECTS (taggs) user1 | James Brown disc | disc | soul jamesbrown user2 | rolls book | book | cars rolls travel so I display different types of terms and in subjects it can have a multiple because it's taggs I use arguments so it can have display for example only store from an user, or from an taxonomy (for examples only the disc, or the disc about soul) so I can link display_view/argtermtype/argtermsubject (I separate the type and subject) MY NEED : what i want is the terms of the view don't redirect on taxonomy/term but on my view so I have to : change the link of terms in view to redirect on display_texts/all/all replace [all] with the [term] argument MY PROBLEM : I can't have the right field of terms displayed in the links of terms in fields, I : checked "Output this field as a link" put the link "display_view/[tid]" for term type and "display_view/all/[tid]" for term subjects NOT checked "Link this field to its term page" what it does : [tid] put in link FOR ALL THE LINE the SAME TERM and it put all the terms in one single link ! that's to say, it creates the links : USER | TITLE | TERM TYPE (only one) | TERM SUBJECTS (taggs) user1 | James Brown disc| [disc] display_texts/disc (ok !) | [soul jamesbrown] (BAD only one link!) display_texts/all/disc (BAD it's not the new term !) what I need : USER | TITLE | TERM TYPE (only one) | TERM SUBJECTS (taggs) user1 | James Brown disc| [disc] display_texts/disc| [soul] display_texts/all/soul [jamesbrown] display_texts/all/jamesbrown) MY QUESTION : so how can I put in argument the term which is display ? I try things like [tid_1] but doesn't work is there any list of fields somewhere ? or do i have to use php code ? how to separate link terms ? if I check "Link this field to its term page" links are separate but it replace my link by "taxonomy/term" link think's in advance for any idea !

  Read the article

• Writing .htaccess mod rewrite for hierarchical categories

  - by NetCaster

  i need to rewrite urls for my classified ads directory i have 4 types of links /City == display all ads in city /City/Cat1 == display all ads in city + category /City/Cat1/Cat2 == display add ads in city + category 1 + category 2 /City/Cat1/Cat2/Ad-id == display the ad itself and pass cat1 cat2 and city variables original hidden url should be index.php?city=alexandria&cat1=cars&cat2=bikes&adid=EWSw22d Can you please help me writing .htaccess for this structure

  Read the article

• Set Jtable/Column Renderer for booleans

  - by twodayslate

  Right now my Boolean values for my JTable display as JCheckBoxes. This would normally be fine but I would like to display them as either an alternative String or image. I can get them to display as true/false but I would like to display them as a checkmark (?) if true and nothing if false. Possibly an image but lets do a String first...

  Read the article

• How to show Iplmage format on the GUI of C++ instead of showing it in another windows?

  - by Darren

  I'm trying to display the output image onto the C++ interface instead of creating another window to display the image. For example: cvNameWindow("Window A",0); cvShowImage("Window A", imgA); This will create an window and display the imgA on it. My question is that can i display my imgA onto my C++ interface together with all my other button and textbox. I'm using Borland C++ Builder 6 and OpenCV.

  Read the article

• Time Calculation in Python

  - by user343934

  Hi everyone, I have two python cgi pages (index, display), what i need to do is calculate time frame between the execution. Work flow: Index.py (submit) After submit it redirect to display.py page display.py page has got class with execute(),display() &init_main() functions In init_main() i have created class object which access to above functions I need to calculate time interval between the submit (index.py) to execute() end, so i can show user how much time does different weighted file takes on real time. Hoping to see your suggestions Thanks

  Read the article

< Previous Page | 204 205 206 207 208 209 210 211 212 213 214 215  | Next Page >