Search Results

Search found 6897 results on 276 pages for 'samsung mobile'.

Page 208/276 | < Previous Page | 204 205 206 207 208 209 210 211 212 213 214 215  | Next Page >

• RAID5 issue after replacing motherboard and upgrading firmware

  - by 8steve8

  ok so ive had a 4x2TB(samsung HD204UI w/firmware patch) raid5 array working normally for about a month. It was in a h57 gigabyte motherboard using the intel raid with Windows 7 x64. Today I got an intel h67 motherboard, so I upgraded the intel raid drivers to 10.1.0.1008 from 9.6.0.1014, and I'm not sure if i checked after a reboot, but it caused no problems. I swapped in the new dh67 motherboard, and my array status was "failed". 2 of the 4 drives listed themselves as members, while the other two drives listed themselves as non-members. I tried going back to the old h57 mobo, and downgrading the raid drivers, but the issue remains. It's not port dependent, 2 of the drives always come up as non-members regardless of what port or motherboard they are plugged into. This screenshot should show that the SNs match, which raises the question why the software doesn't realize the drive is a member of the array. I'd like to know if anyone has experienced anything similar, and what should I do, can I force the drive to be recognized as a member (without wiping data)?

  Read the article

• Image resolution not showing up in "Get info" dialog in Mac OS X

  - by R.A

  When I bought a Mac Mini with Mac OS X, I could show image dimensions in the Get Info dialog. After that, I installed some mobile application development software and later I noticed, Get Info was not showing the image dimensions anymore. I need to check the dimensions of those images to include artwork in my project. Now, I reinstalled my Mac OS X and it's working fine – it is showing the dimensions: Before that, 516x314 was missing. Why did that happen? How can I prevent it from happening again?

  Read the article

• How to delete a file that contains a backslash in the name under Windows 7?

  - by espinchi

  I want to delete a file named workspaces\google-gson-1.7.1-release.zip Yep, it contains a backslash in the name. Here it is: G:\>dir Z_DRIVE Volume in drive G is samsung Volume Serial Number is 48B9-7E1D Directory of G:\Z_DRIVE 04/06/2012 08:09 PM <DIR> . 04/06/2012 08:09 PM <DIR> .. 05/01/2011 02:21 PM 528,016 workspaces\google-gson-1.7.1-release.zip 1 File(s) 528,016 bytes 2 Dir(s) 88,400,478,208 bytes free The first attempt is to just delete it from the Windows Explorer, but it says it can't find the file. Then, I tried from the command line: G:\>del Z_DRIVE\workspaces\google-gson-1.7.1-release.zip The system cannot find the file specified. And, after researching a bit in the internets, I also tried the following, with no luck: G:\>del \\?\G:\Z_DRIVE\workspaces\google-gson-1.7.1-release.zip The system cannot find the file specified. Other than booting from some Linux CD, is there a way to get rid of this file? Update: also tried the following combinations, but the error is the same: G:\>del "\\?\G:\Z_DRIVE\workspaces\google-gson-1.7.1-release.zip" G:\Z_DRIVE>del workspaces\google-gson-1.7.1-release.zip G:\Z_DRIVE>del "workspaces\google-gson-1.7.1-release.zip" G:\Z_DRIVE>del workspaces*google-gson-1.7.1-release.zip

  Read the article

• Why is my Toshiba Satellite L675D laptop not connecting to my HD TV using an HDMI cord?

  - by Akasha Eyre

  I'm having a problem connecting my Toshiba Satellite L675 laptop to my Samsung HD TV. I've done it before using an HDMI cord but now, for some odd reason, it's not connecting at all. My computer screen before would go completely black for a second & then come back & (with it being attached to the TV with the HDMI cord & it being on the proper channel) it would make a sound, come on & work beautifully. Now, I try hooking it up & it doesn't do anything. No black screen, no sound. The TV screen just says there's no connection & that I need to check out the power source. I'm still checking around, trying to find out if there's a virus in my computer (since my dad & I have the same computer & he can connect his to the TV with no problems), or if I deleted something that had to do with the connection. I've tried turning my computer off & letting it sit for a while, I've tried checking out other websites & have come up with nothing.

  Read the article

• Can't do anything with Ext. HDD, ".Trashes" is probably the boogyman. (On a MAC!)

  - by Sander Schaeffer

  I bought a external Harddrive today, A Samsung. But I'm not able to do anything with it A few notes on that. I can't put anything on the harddrive. It keeps on 'preparing copying files' I can delete anything on the harddrive system files, except the folder ".Trashes". It gives error 'Unexpected error: -50' I've tried to empty my own trashcan, no changes. I've set the file permission on the .Trashes to read/write everyone, doesn;t change a thing Trying to format the whole drive with DiskUtility, but quits at start, because the drive cannot be deactivated I've tried a few terminal commands sudo -s -r rf /Volumes/Untitled\ 1/.Trashes - Directory not empty -r rf /Volumes/Untitled\ 1/.Trashes - no permissions Also cd /Volumes ls -al cd name_of_partition ls -al -rm -rf .Trashes Again: Permission error. Also: I can't change drive permissions via Disk Utility, via the button 'recover drive permissions', because it is 'blank' I really can't figure out how to delete .Trashes, format the drive or get the damn thing working. Any suggestions? p.s. If this is the wrong Stack Exchange site: Please redirect me!

  Read the article

• How to import Exchange calendars in Google Calendar (No Desktop Outlook)

  - by Tonny Madsen

  I would like to import my calendar from my company Exchange 2010 server as a new calendar in my private Google account. The primary use is to easy my planning when at home with my laptop. I already have access to both the Google and Exchange calendars on my Android phone, but the size of the screen makes it rather difficult to plan anything serious. Note that I run OSX on my laptop I would prefer a Internet based solution to any software on my own laptop. I do not want an Outlook add-in I do not want to include the work related events in my main calendar I do not want a mobile solution I can pay for the solution

  Read the article

• what can be reasons for localhost responding super-slow the first time a page is requested?

  - by frequent

  Still learning my server-ways with Apache2.2/MySQL5.2/Coldfusion8 on localhost (running Windows XP) What I notice is every time I request a page for the first time after firing up Coldfusion and Apache, localhost needs forever (1+ minute to respond and send the inital page). After that all seems to run at normal loading time. I'm using require.js to pull in Jquery, Jquery Mobile and two other plugins on first page load, but loading the same page from a real server works normally, so I'm also ruling out this as a probable cause. Since it happens regardless of which page I'm loading first it shoud not be page related, so I'm looking for other clues on why this could happen. Thanks for some thought!

  Read the article

• Cannot change power button or lid close action

  - by Mark Henderson

  I have a Samsung 900x laptop and I want to change it so that when I close the lid, nothing happens (I often close the lid to carry it somewhere 10 seconds away, and by putting it into suspend it cancels any active downloads/etc). Easy, right? Go to Power Options and change it there; just like on every other laptop in the world. Not so fast: Saywhat?! That message only shows up for the nodes for Lid Close Action, Power Button and Sleep Button. I can change every other setting except for those three. I'm definately an Administrator on the computer, and I've googled the error and found dozens of hits on other crappy forums, but of course nothing on those worked (otherwise, I wouldn't be here). And as ususal the "Why can't..." hyperlink gives no useful infomation what so ever (just a generic Help document). So - how can I change what closing the lid does? I will modify the registry directly if I have to.

  Read the article

• Graphics artifacts/distortion with Win7 and nVidia

  - by Gepard

  Problem I encounter is rather hard to describe, so I provide a screenshot: http://dl.dropbox.com/u/1732760/video-distortion.png As you can see there are some horizontal stripes in random colors. These stripes appear sometimes in all windowed apps, games and on the desktop too. They tend to stay in place until I refresh window (or force it to to redraw by for example minimizing and maximizing again). They also tend to appear in the same place and shape multiple times, even if they disappear, it's very likely they will be again in the same place after a while. These artifacts do not blink or change if computer is idling. If I don't touch anything, do not use mouse, they will stay in place forever (unless some app redraws its window on its own). I first encountered this problem some weeks ago. Back then I thought it might be cooling problem, so I took out the graphics card, removed dust from the radiator and fan and put it into PC back. I also ran some stress test using Furmark (peak tempearature was ~65C) to see if the problem becomes more intense if the card gets hotter, but suprisingly no artifacts whatsoever appear during the stress test. Graphic card is Galaxy GeForce 7300 GT with DDR3 memory, was never overclocked. Drivers are the latest, from Nvidia site. OS is Windows 7 64-bit, updated. AMD64 3000+, 2GB RAM. I'm running a dual monitor setup with 2 19'' Samsung LCDs and problem is on both, so I assume it's not a monitor or cable issue.

  Read the article

• Desktop file for my pythin script

  - by Jason94

  Hi! I would like to make a .desktop file for my Python script, but so far the only thing i have is a clickable icon on my desktop! It does nothing when i click it, so im guessing there is something wrong with the execution :) The desktop file: [Desktop Entry] Version=1.0 Type=Python Exec=/home/user/MyDocs/Python/EasySteer/Main.py Name=EasySteer Icon=steering_wheel X-Icon-Path=/usr/share/icons and I also tried: [Desktop Entry] Version=1.0 Type=Application Exec=/usr/bin/xterm "python /home/user/MyDocs/Python/EasySteer/Main.py" Name=EasySteer Icon=steering_wheel X-Icon-Path=/usr/share/icons But nothing works :D if it matters this is for my Nokia N900 mobile phone that runs Maemo linux, but i think the basics are the same.

  Read the article

• Windows 8 install from USB freezes

  - by Rafael Almeida

  I'm trying to install Windows 8 from an 8GB Kingston Data Traveler. I'm currently using the Windows 7 USB DVD Download Tool to put the iso into the flash drive. It copies the files, but in the end it says it 'had a problem with bootsect' and could not make the flash drive bootable. This seems to be because my current system is Windows 7 32bits, and the bootsect.exe in the ISO is a 64-bit executable. Then I downloaded the 32-bit bootsect.exe and made the drive bootable by running: bootsect /nt60 E: /mbr Then I restarted and managed to boot via the flash drive, but now everything is very slow. It takes about two minutes for the initial black screen with the Windows logo and the spinner go away, then it goes to a purple-ish blank screen that stays on for about five more minutes and then it finally shows a dialog asking for the installation, date/time and keyboard languages. I input then, click "Install Now" and it takes about three more minutes with a "Setup is starting" screen. After that, the PC apparently reboots, the CPU fan speeds up considerably, and there's no video and nothing more happens even after more than ten minutes. What is happening? I already tried using another USB port and even installing from a Samsung G3 Station 2TB external hard disk, but the same thing happens. The file transfer speed to the Kingston drive was about only 3 megabytes per second.

  Read the article

• Safari 7 SSL error if using IP-adress

  - by K. Biermann

  I have created my own CA for internal usage and set the root certificate to trustworthy on my machines. With this CA I signed the SSL-certificates for my internal servers. I only address them with their IP and so I used the servers' IP as certificate name. If i connect to the Servers with Chrome or mobile Safari it works without problems, but if I use Safari 7 under Mavericks (on the same machine with the same keychain) i get the following error: "The certificate is not valid (host name mismatch)". I double checked that I entered the correct IP ("https://192.168.2.130"), but I always get the same error. Do I need to enter a different name for the certificate or is it just that Safari doesn't support SSL certificates for IPs? Here is a screenshot of the error message (I can only post images with at least 10 rep): Safari's error message Thanks in advantage and please excuse my bad English :D

  Read the article

• Laptop seemingly randomly "freezes" to the point of no longer executing applications

  - by Aierou

  After upgrading to Windows 8 pro on my Samsung Series 7 Chronos NP700Z5C-S04US (may be relevant, I'm not sure), my computer began to stop allowing the execution of any service or application, as well as discontinuing the update of the clock until a hard shutdown was performed. This seems to occur randomly after periods of inactivity and I've no idea the cause. These are measures I have already taken in order to attempt to stop this: -Obviously Googling potential answers to this problem -Updating all drivers -Researching all events that have occurred around the time of the failure to respond (with no results) -I tried applying "bcdedit /set disabledynamictick no" which was a hotfix for what seemed to be the same error but was not. Here is some more, potentially related, information about the error: -No BSOD (actually, I haven't at all experienced a BSOD with Windows 8) -Computer seems to have a problem shutting down/restarting most of the time (Hangs at the point where it should completely turn off) -New sound instances are not able to play, but previously loaded containers function properly -As mentioned before, the clock freezes at the time of the error -USB devices function properly -Servers that I was running fail to respond on my end, but stay online. If you require more information, please request it specifically and I will be happy to oblige. Thanks.

  Read the article

• Desktop file for my Python script

  - by Jason94

  I would like to make a .desktop file for my Python script, but so far the only thing i have is a clickable icon on my desktop! It does nothing when I click it, so im guessing there is something wrong with the execution :) The desktop file: [Desktop Entry] Version=1.0 Type=Python Exec=/home/user/MyDocs/Python/EasySteer/Main.py Name=EasySteer Icon=steering_wheel X-Icon-Path=/usr/share/icons and I also tried: [Desktop Entry] Version=1.0 Type=Application Exec=/usr/bin/xterm "python /home/user/MyDocs/Python/EasySteer/Main.py" Name=EasySteer Icon=steering_wheel X-Icon-Path=/usr/share/icons But nothing works :D if it matters this is for my Nokia N900 mobile phone that runs Maemo linux, but I think the basics are the same.

  Read the article

• Video driver reports 8-bit color depth after Windows Update

  - by user3163

  Windows Update pushed out a new video driver for the Mobile Intel(R) 4 Series Express Chipset Family. One HP 6730b laptop was updated from 8.15.10.1872 to 8.15.10.2021. After the update the color depth is reported as 8-bit even if the setting is 32-bit. This means that Areo effects are disabled. Downgrading to 8.15.10.1872 did not help. Is there any way to force the video driver to report 32-bit color depth?

  Read the article

• Is my motherboard failing, or is there some other issue?

  - by ThatGuy

  So, several months ago I put together my own desktop PC. I set up a dual boot to Windows and Ubuntu. Recently, without changing any settings or installing anything new, the wifi stopped working on windows (I use a wifi adapter). It said it was connected, Network settings showed that it was working and running trouble shooting had no results. My internet still works on any other device. I found that removing the adapter from the motherboard and plugging it back in was the only thing that fixed the problem. Reinstalling the wifi drivers did not help. I purchased a new Wifi adapter, but the problem persists. More recently, I had a much more discouraging development. Sometimes, turning on the computer results in a boot loop: BIOS never starts. Instead, the monitor turns on as if it got a signal, then immediately turns off. This loops on it's own indefinitely until I hold down power, hard reset it, and try again. Sometimes it works, sometimes it doesn't. I haven't tested much on the Ubuntu side. It appears that wifi works at least some of the time, but since I've had issues just getting to BIOS I'm not confident the issue is on the software side. I've also noticed issues with some of the USB ports no longer working, but that seems to be off and on. Finally, as of a few minutes ago, I booted to windows to discover that everything was running very slowly. Slow here is a relative word, but I have a Samsung 840 pro SSD and I'm used to applications running nigh instantly, and it was a solid 3 minutes before any of my applications would load. Anyway, my question is this: Is it likely that my motherboard is failing? Either way, what steps can I take to try and pin down the problem and figure out what to do?

  Read the article

• Apache routing vhosts to /var/www

  - by FHannes

  One user at my site has reported that he reaches the content at /var/www when browsing to any of the vhosts at my server. As far as I’m aware, my Apache server does not contain a document root that references this folder. On top of that, this user seems to be the only one experiencing the issue. According to his ISP, the issue isn’t caused by them, yet, on his mobile connection, he can access the site. When browsing to my server’s IP, he also receives the correct content from the default vhost. What could be the possible causes of this issue and how can I get it to stop? I’ve explored pretty much every option I could think of.

  Read the article

• How can I make my laptop use a phone as a wi-fi adapter?

  - by Dennis Williamson

  I have an HP Pavilion dv6400 series laptop with an NVidea chipset which is the subject of a class action lawsuit. The symptom (PDF) that I'm experiencing is that the system fails to recognize that there is a wireless adapter installed. It doesn't appear in Device Manager. In this question, I ask if there's a way to work around this problem. As an alternative, I'd like to see if there's a way to use an old Windows Mobile 5 phone that does not have cellular service (voice or data) as a Wi-Fi adapter. How can this be accomplished? The system is running Windows Vista Home and has the latest BIOS (F42) and Windows updates and drivers.

  Read the article

• Manage gmail label on iPad

  - by tinmaru

  My iPad is configured with gmail (using an exchange account, not imap but I don't think it is relevant). I would like to create and manage folder in the mail app. I noticed that it is sync to my gmail label. - this feature is not possible in the native mail app, neither in the official gmail app - the only way to do it is to use a pc or a mac (with the gmail desktop version) - in the gmail mobile web version, I cannot find any button to force desktop version. What is the simplest workaround?

  Read the article

• Software for RAID Failure Alerts?

  - by QF_Developer

  I have two 256 GB Samsung 840 Pro SSD disks in a RAID 1 array. I would like to receive a notification if one of the disks in the array fails. Can anybody recommend an application I can install on the server to fire an email if such an event occurs? Here are some additional specs: Supermicro X9SCM-IIF motherboard utilising the hardware RAID controller. OS = Windows 2012 Standard Also is it possible to simulate a disk failure by pulling it out of the bay? SSDs appear to fail close together when in a mirrored config so I'd like to know ASAP if one goes down so I can swap them out with minimum delay. UPDATE 26th June 2013 ------------------------ None of the software that ships with the Supermicro X9SCM-* motherboards offer support for RAID monitoring. As has been pointed out here, these boards are built on an Intel chipset for RAID and so I installed Intel Rapid Storage Technology that supports automated email notifications on RAID failure http://www.intel.com/support/chipsets/imsm/sb/cs-020784.htm One small issue, the software only allows you to send email notifications without SMTP authentication. There's a bunch of different workarounds here: http://communities.intel.com/thread/30771

  Read the article

• Laptop held hostage by administrator domain and Bit locker

  - by user144780

  I have a laptop computer that I had when I was working at an IT company. I don´t work there anymore but I could keep the computer (Lenovo) Suddenly my wireless internet didn´t work anymore showing error "insert SIM into the mobile broadband device" and month later connectiong to internet with cable got disabled I don´t know the password to sign in as an administrator on domain and whatever I try to do/install/change settings... everything needs admin rights. To surf the internet again with the computer I tried to install a new Windows but it´s seems to be protected with Bit Locker, asking for recovery key. I´ve googled and googled bunch of CMD tricks but most of the shows "system error 5 has occured" Is there anyway to get the wireless internet to work, change the admin or install new Windows? - or should I rather enjoying throwing it of the balcony or set it one fire? :)

  Read the article

• Tips for locating my stolen computer

  - by user379468

  I'm in a bit of a panic, my new Powerbook laptop was stolen. I had no mobile me, or security software installed on the computer. I have the mac address of the computer as well as the serial number. Is there a hacky way to do this? I was even thinking perhaps of trying to use bluetooth, I know I had it set to discoverable. and I know the "name" of the computer, perhaps there is app that can scan the names of bluetooh computers in the vicinity? If there some third party you can get to scan the internet for your mac address? Any glimmer of hope would really help

  Read the article

• Microsoft mouse screws up my power settings

  - by Patriot

  Running a new computer with Windows 7 and 64-bit OS. Had a wireless Logitech mouse that worked perfectly with this set up. The mouse was old, and the buttons were sticking and causing double clicks, so I bought a new Microsoft Mobile Wireless 3000 mouse to replace it. The new mouse works perfectly, but now my screen saver is disabled and my computer won't go into sleep mode after 15 minutes as per my power setting. If I hook the Logitech mouse back up, screen saver works fine and computer goes to sleep as it should. Am I missing something, or is Microsoft's mouse just junk. Got no software with the new mouse, so no drivers seem available.

  Read the article

• Almost All Logical Volumes Disappeared - Recovery?

  - by Alex

  We had a hard disc crash of one of two hard discs in a software raid with a LVM on top. The server is running Citrix xenserver. On the hard disk which is still intact, the volume group gets detected well, but only one LV is left. (some hashes replaced by "x") # lvdisplay --- Logical volume --- LV Name /dev/VG_XenStorage-x-x-x-x-408b91acdcae/MGT VG Name VG_XenStorage-x-x-x-x-408b91acdcae LV UUID x-x-x-x-x-x-vQmZ6C LV Write Access read/write LV Status available # open 0 LV Size 4.00 MiB Current LE 1 Segments 1 Allocation inherit Read ahead sectors auto - currently set to 256 Block device 253:0 root@rescue ~ # vgdisplay --- Volume group --- VG Name VG_XenStorage-x-x-x-x-408b91acdcae System ID Format lvm2 Metadata Areas 1 Metadata Sequence No 4 VG Access read/write VG Status resizable MAX LV 0 Cur LV 1 Open LV 0 Max PV 0 Cur PV 1 Act PV 1 VG Size 698.62 GiB PE Size 4.00 MiB Total PE 178848 Alloc PE / Size 1 / 4.00 MiB Free PE / Size 178847 / 698.62 GiB VG UUID x-x-x-x-x-x-53w0kL I could understand if a full physical volume is lost - but why only the logical volumes? Is there any explanation for this? Is there any way to recover the logical volumes? EDIT We are here in a rescue system. The problem is that the whole server does not boot (GRUB error 22) What we are trying to do is to access the root filesystem. But everything was in the LVM. We have only this: (parted) print Model: ATA SAMSUNG HD753LJ (scsi) Disk /dev/sdb: 750GB Sector size (logical/physical): 512B/512B Partition Table: msdos Number Start End Size Type File system Flags 1 32.3kB 750GB 750GB primary boot, lvm And this 750GB LVM volume is exactly what we see on top.

  Read the article

• Should we install the OS on an SSD or not when running virtual machines?

  - by Raghu Dodda

  I have a new Dell Mobile Precision M6500 laptop with 8 GB RAM. it has two hard drives - 500 GB @7200 RPM and a 128 GB SSD. The main purpose of these laptop is software development in virtual machines. The plan is to install the base OS (Windows 7) and all the programs in the 500 GB drive, and let the SSD only contain the virtual machine images. It is my understanding that the we get most performance from the virtual machines if the images are on a separate hard drive than the base OS. Is this the way to go, or should I install the OS on the SSD as well? What are the pros and cons? The virtual machine images would be between 20 - 30 GB, and I might run 1 or 2 at a time.

  Read the article

< Previous Page | 204 205 206 207 208 209 210 211 212 213 214 215  | Next Page >