Search Results

Search found 16460 results on 659 pages for 'computer towers'.

Page 209/659 | < Previous Page | 205 206 207 208 209 210 211 212 213 214 215 216  | Next Page >

  • external usb hard drive is not being seen anymore

    - by incrediblehulk
    I think my problem is a little different than several other similar titled questions. Everything started while I was using 10.10. External drive was always recognized and mounted, but the timing of this differed. I mean when I booted, the OS sometimes saw the drive immediately, sometimes after a few minutes, sometimes after hours. Although this was annoying, I tolerated this somehow. Then this problem persisted after I upgraded to 11.04 with a clean install. Afterwards, the drive became totally invisible to the OS. It is not even detected as an usb device anymore. However, there is one thing I can do to make it seen. If I boot to another operating system which can detect the drive, and then boot back to ubuntu, everything is perfect. but this is of course very impractical. To summarize, the usb drive is recognized by ubuntu if and only if another OS in the same computer could recognize it first. I should also say I have not had any problems with the same drive in any other OS or a different computer. My drive is philips with a hitachi hdd inside, has its own power source and any other usb powered drives have never caused this kind of a problem. I've tried almost all recommendations in similar topics but none of them seems to be related to this one. What can I possibly do to fix this?

    Read the article

  • Hard drive clicking noise on Acer AO722

    - by Blank
    I'm running Ubuntu 11.10 on an Acer Aspire One 722. Whenever I'm on battery power I get a clicking sound from my hard drive every 5 seconds or so (this does not happen when the laptop is plugged in). I'm dual booting with Windows 7 and I don't get the clicking sound in Windows. The clicking sound stops when I run the command:sudo hdparm -B 254 /dev/sda Also, according to:sudo smartctl -H /dev/sda my hard drive is healthy. Is this clicking sound something I can just ignore? Or is it a serious problem and will it eventually damage my computer? If so, how would I fix it? I have tried adding hdparm -B 254 /dev/sda to my /etc/rc.local file, but I still run into the clicking problem if my computer boots while plugged in and is then unplugged. Also, I'm finding this fix to be unreliable. Sometimes it works, sometimes it does not. Is this a good solution and is there a better way of doing this? Also, would running my laptop with a -B value of 254 have any negative effects? (I read somewhere about a lower level protecting the hard drive from bumps)

    Read the article

  • Why aren't there 8gb RAM modules yet?

    - by user49951
    Why is RAM module development seemingly stuck at the same size for a while now (a couple of years)? I bought 2x2gb modules 2 years ago, and now it's all the same size, with prices even bigger. I want more memory, because I work a lot on my computer and I just need it. What is going on? Hardware/memory progress was being made constantly until these couple of years, and I'm a big computer user for over 15 years. Why isn't here 4gb/8gb modules yet? I would gladly replace my DDR2 motherboard for a DDRX one if it had at least 4gb DDRX modules for a reasonable price. Now we have a situation with very cheap usb drives reaching 64gb size, and a ram modules with pathetic 2gb size. Sounds like some sort of conspiracy.

    Read the article

  • Using git with cgit for decentralized/centralized development

    - by polemon
    I plan to use git for hosting my projects on my server. I've read about cgit, git-daemon, and I more or less decided to use those tools. But general use is still kind of confusing for me. What do I need to set up on the server, to push my files onto it. And when the files on the server are newer as the files on my computer, how do I merge them? Also, I use, say, two computers where I develop. How do I merge from one computer to the other? Also, when two people are working on the same project, how do they merge their local repos from one another? As you probably can tell by now, I come from SVN, but I've worked with Mercurial and now I'd like to test git.

    Read the article

  • windows 7 (windows-system32-systemproperties.exe n) need programme elevation message

    - by mohammedjas
    hi, i have the issue with windows 7 32-bit professional, since this is a network computer, when i download or install something it was asking for admin password , i gave password, then its shows programme need elevation , after i gone to my computer-properties-advanced tap - again the same message displays as windows-system32-systempropertiesadvanced.exe need programme elevation .this same message showing in all eg: if i click to install something wind/sys32/isyspropertiesins.exe progrmme need elevation , also i was not able to add or change somthing in the computermanagement, user or group , says some error , even i logged in admin also,, please help me out with good soluton ..i am looking forward reply , as soon as possible. regards, mohmmed

    Read the article

  • games and movies become too slow after some time

    - by ishaq
    On my gaming desktop, I was fixing my desktop's power supply when something seemed to burn (I got that stinging burning smell). However when I turned ON the computer (it was OFF before), everything seemed to be fine. However, I have noticed that now it becomes too slow if I play a game or movie on it. I am talking about the computer becoming painfully slow after about 5 minutes into the movie/game (it works fine otherwise e.g. browsing), it becomes so slow I can see individual frames from movies/games. What could be the problem? A fried video card? friend memory (RAM), something else? My system's configuration is: Intel Core i7 CPU 3.40GHz 8GB DDR3 RAM 2TB WDC HDD NVIDIA GeForece GT 220 (1GB) Thermal Take Commander MS1 Chassis ( http://www.thermaltakeusa.com/Product.aspx?S=1394&ID=2051 ) mainboard: Intel DH67CL AAG10212-208 Realtek High Definition Audio

    Read the article

  • How do spambots work?

    - by rlb.usa
    I have a forum that's getting hit a lot by forum spambots, and of course the best way to defeat something is to know thy enemy. I'll worry about defeating those spambots later, but right now I'd like to know more about them. Reading around, I felt surprised about the lack of thorough information on the subject (or perhaps my ineptness to input the correct search terms for better google results). I'm interested in learning all about spambots. I've asked on other forums and gotten brush-off answers like "Spambots are always users registering on your site." How do forum spambots work? How do they find the 'new user registration' page? (I'm especially surprised because some forums don't have a dedicated URL for this eg, www.forum.com/register.html , but instead use query strings or even other methods invisible to the URL bar) How do they know what to enter into each 'new user registration' field? How do they determine what's a page they can spam / enter data into and what is not? Do they even 'view' this page at all? ..If not, then I'd assume they're communicating with the server directly - how is - this possible? How do they do it? Can forum spambots break CAPTCHAs? Can they solve logic questions (how?)? Math questions? Do they reverse-engineer client-side anti-bot validation scripts? Server-side scripts? What techniques are still valid to prevent them? Where do spambots come from? Is someone sitting behind the computer snickering as they watch their bot destroy site after site? Or are they snickering as they simply 'release' it onto the internet somehow? Are spambots 'run' by an infected computer somewhere? Do they replicate themselves? etc

    Read the article

  • Shutdown button doesn't work in Windows 8

    - by Yob
    Some time ago I installed Windows 8 64bit ready-to-market version (as a student I had access to it before premiere). What I discovered is that the "shutdown" button doesn't work. When I want to shutdown the computer it simply logs me out. In order to turn off my machine I have to click "restart" and then simply press the poweroff button. I installed some updates but this issue is still not resolved. Is there any way to shutdown the computer in a normal way?

    Read the article

  • dual-boot does not work

    - by elyashiv
    I have a PC with linux-mint installed on it. I wanted to install win-7 along-side, for some reasones. what I have done is: create a bootable USB-stick with Ubontu ios. restarted the computer, this time with Ubuntu (running from my disk-on-key). created a partition on the main HD using GPart. formated the partition to NTFS. restarted the computer, this time through the installation CD for win-7. installed win-7 with normal settings. that all worked, and I'm writing this through win-7. the thing is - when I boot my system, I don't get to choose what OS to run. I checked the settings in msconfig, and in boot label it has just win-7. how can I boot linux?

    Read the article

  • How to fix Asus Eee PC 900 startup issues after failure?

    - by EBrown
    My Asus Eee PC 900 shows no signs of life. I push the power button and get no response from anything. No lights, no power, no boot-up screen. It has been like this since I received it from a friend. I asked her what happened and she said that smoke came from the keyboard, it shut down and hasnt turned on since. I have tried removing and cleaning the RAM, the computer charger still connects and works, but the battery receives no charge and the computer won't power on. Any ideas as to what is going on?

    Read the article

  • Does the size of the monitor Matter?

    - by Arsheep
    I have a old computer, and I want to buy a big LCD. The best I've found so far is Viewsonic's 24" LCD TFT monitor. So will it run without any problems, or do I need to upgrade the video cards or something as well? The computer is not too old: it has P4 board and celeron processor, with 128 graphics memory. And in display properties, it says that the maxium that I can use is 1280 x 1024 resolution. I am noob hardware-wise, so need help on this stuff. Thanks

    Read the article

  • Does the size of the monitor Matter?

    - by Arsheep
    I have a old computer, and I want to buy a big LCD. The best I've found so far is Viewsonic's 24" LCD TFT monitor. So will it run without any problems, or do I need to upgrade the video cards or something as well? The computer is not too old: it has P4 board and celeron processor, with 128 graphics memory. And in display properties, it says that the maxium that I can use is 1280 x 1024 resolution. I am noob hardware-wise, so need help on this stuff. Thanks

    Read the article

  • Home router for higher network loads

    - by Zizzencs
    I'm trying to find a replacement for my ASUS WL500GP router. Some constraints: my ISP now provides 120 Mbit bandwidth - the router must be able to handle it I have 3 computers and a laptop at home - the router must have at least 4 LAN ports and the WAN port I need to be able to do the following in parallel: use bittorrent with ~1000 connections transfer files from one home computer to another at high speed access one home computer from my workplace I don't really need wireless I don't really want two boxes to serve all these purposes. So I was searching for a router with 1 Gbit ports, jumbo frame support and good reviews, but haven't really found a promising candidate so far. Any suggestions?

    Read the article

  • Wi-Fi or Bluetooth to USB converter

    - by yerzhik
    Is there a device, that works without a driver, you just connect it as usb, and receive any signal sent to it as if it were COM Port wired connection? For example, such a device that gets data sent to it by Wi-Fi network or Bluetooth and resends it to the USB. Of course it has to be set up once (network name, password etc) and for this purpose you need a driver, but once it is set up, you can use it at any computer without a driver. I have a Bluetooth USB, but I think it can't work without a driver. By just connecting it to any computer you can't find it in device list on another bluetooth device (as phone, etc).

    Read the article

  • Java Applets fail to launch in Windows 7 64bit

    - by Steve
    Hi can you help? I'm having great trouble launching Java applets using Windows 7 64 bit. I have the 32 bit version of Java installed (as recommended, for use with 32 bit browsers). When I click on an Java applet to open it the Java logo shows with a circular progress bar, but the process goes no further, just the progress bar going round and round. There are no error messages. The computer is a few months old and Java has never worked properly. I've tried with both IE9 and Chrome, followed the suggested fixes, uninstall then reinstall, check certain browser settings (all were in order), check Java control panel settings (again all was in order) delete the internet cache etc, tried 32bit & 64bit Java side by side. All to no avail. I'm baffled Is there anything else to try, or do I have to accept a computer without Java (Very inconvenient!) Thanks

    Read the article

  • Does the size of the monitor Matter?

    - by Arsheep
    I have a old computer, and I want to buy a big LCD. The best I've found so far is Viewsonic's 24" LCD TFT monitor. So will it run without any problems, or do I need to upgrade the video cards or something as well? The computer is not too old: it has P4 board and celeron processor, with 128 graphics memory. And in display properties, it says that the maxium that I can use is 1280 x 1024 resolution. I am noob hardware-wise, so need help on this stuff. Thanks

    Read the article

  • Having trouble installing Bradcom STA driver

    - by user192881
    I just installed Ubuntu and love it so much, its so fast now. But I have a problem connecting to the internet. I checked and saw I have to install the driver Broadcom STA wireless driver but every time I do try to install it it says: Sorry, installation of this driver failed. Please have a look at the log files for details: /var/log/jockey.log I went to the terminal and copy and pasted the log file name. and when I did it, it said I have no permission to access this file. I checked on the forums that I have to be on a wired connection. So I plugged my laptop into my router and I got internet then tried to install the driver again. And it was loading then when it got to the end the same message popped up. Also I have one of those little USB router things you plug into the computer and it gives you internet I have been using that but its to slow. So I want to use the one in my computer but cant. Also I tried the command: sudo modprobe wl and when i type that command in it says: FATAL: Module wl not found Also I'm using Ubuntu 12.04

    Read the article

  • RCA monitor won't display highest resolution when NVidia drivers are installed

    - by novellterminator
    My computer is a dual-monitor setup. It won't display my second monitor's highest res... In fact, it will only display one resolution. Anything higher or lower makes the monitor not show the screen. I've had this problem with this computer, and I upgraded almost all my components (cpu, RAM, mobo, and video card included) and I still have this problem with my new setup. This leads me to believe it's a problem with my monitor and the NVidia driver together. Any thoughts on what can be done? The manufacturer of the monitor doesn't make a driver for this monitor. I used to run Windows Vista and now my new setup runs Windows 7.

    Read the article

  • Is there a Google Authenticator desktop client?

    - by cwd
    I am using Google Authenticator for 2-step authentication. I like how I can use a code and verify my account using my phone: I realize that the app was designed to run on a device other than a computer to increase security for the computer (in case that it is lost or stolen), but I would like to know if there is a way I can run Google Authenticator on my Macbook. Now, per the Google Authenticator Page it will not run on a desktop: What devices does Google Authenticator work on? Android version 2.1 or later BlackBerry OS 4.5 - 6.0 iPhone iOS 3.1.3 or later However there are several emulators for developers and so I wonder if it is possible to run one of these emulators and then run Google Authenticator with that. I do realize this is not a best practice - but I'm less worried about my laptop getting stolen and more worried about someone just hacking the account. So my question is this: Is it possible to run it on the desktop, even though it is not meant to be / not recommended?

    Read the article

  • Step by Step: Remove/Sideline Preinstalled Windows 8, Install Ubuntu

    - by user207562
    I want Ubuntu as my primary/only operating system. Computer came with presumptive Pre-Installed Windows 8.(touch screen) Help. New Dell Inspiron 15r. Cannot install Ubuntu 12.04-03 or LTS. I need/request step by step instructions to remove Windows 8 or sideline Windows 8. (ie) BIOS settings I need to know: What to have; What settings; When to apply; Boot manager settings. UEFI. Etc. This should be easy, but I am mired in the Herpes that is Microsoft. I end up having a presumed dual boot that will not access Ubuntu. (ie) Step 1: Turn on computer. Step 2: F# to change ... to ... at Dell prompt... I want to use Ubuntu as my primary operating system or my only operating system.

    Read the article

  • Bing New Tab Page on Chrome

    - by One Terrorist
    For a long while, my computer had the default new tab page, which I liked. Recently, it has turned into a bing search bar tab. I hate bing. I checked all my settings, removed unused extensions, checked my Chrome files briefly, but I can't find how it keeps coming back! At first I thought it was easy to find; it was set as the new tab page, but it isn't now and it's still here! I installed a new extension after a few tries trying to remove it, called "X New Page Tab", and it worked for one night, then Bing overrode it. Any help please? I really don't want Bing as anything on my computer.

    Read the article

  • Hitching and Slowness Due to HDD Activity on Ubuntu, But Not Windows?

    - by Espionage724
    It's been bothering me for months now, but I've noticed in Ubuntu (or any distro of Linux I've tried), any major I/O activity will cause hitching and general slowness. For example, if I try doing a file transfer from my network computer to the computer I'm using and try moving the mouse after a while, it might not respond for a second or so. Similar incidents occur in other cases too (right-clicking to get a context menu takes a few seconds, hitting the drop-down application bar takes a while, etc). My HDD isn't top-notch (a WD Blue 500GB 7200RPM drive) but I don't recall it being nearly this bad in Windows 7, 8, or 8.1. CPU activity during file transfers is relatively low (less than 10-20% on all cores of a Phenom II X4 @ 3.3Ghz). I'm using Gnome System Monitor (on Xubuntu) and can't seem to see what kind of HDD activity is occurring though. I have 8GB of RAM too, which is moderately being used (2.5GB), but shouldn't be a problem either. Any ideas what's up? I've tried kernels between 3.8 and 3.11 (i'm using saucy currently with 3.11).

    Read the article

  • How to rotate attached monitor to notebook of Sony's Z-series?

    - by user67175
    Is it possible that Sony is selling a top of the line, hugely expensive computer that does not have the basic ability to rotate an attached monitor? Is it possible that the Z-series simply can't do this? The Windows control panel is missing the normal option for "rotation", as is the Nvidia control panel for "orientation" , no additional rotation software works. Sony sales says they do not know the answer to this. Sony technical supports says that the problem lies with Nvidia, Nvidia technical supports says the problem lies with Sony. Any advice for a fix for this short of returning the computer would be greatly appreciated. Also wondering if this problem is common to computers running Windows 7?

    Read the article

  • Mount remote drive by port forwarding

    - by Anushka
    I have a windows 7 computer at home and a remote windows XP machine with an external USB drive attached to it. I would like to be able to copy files to and from home/the remote USB drive. The problem is that the only way of contacting the work computer is by first sshing into a different remote linux machine as there is a firewall that prevents direct internet connection. I can see two possible solutions but I don't know how to do them. Set up winscp using ssh port forwarding via the linux box so that I can copy to and from the two windows machines. I assume that I would need to run an ssh server on the XP machine as well to do this? Mounting the remote USB drive on the remote windows machine from the home XP machine via ssh port forwarding again via the linux box. Does anyone know how to do either solution?

    Read the article

  • Connecting to a 2.5" laptop drive using USB

    - by user27449
    So I swapped my MBP hard drive with a SSD drive, and I want to connect to my old hard drive. I bought a nextstar 3 external 2.5" drive enclosure that has a USB 2.0 interface. I watched an online video of an older version of the enclosure, and in the video they had a ATA cable to connect to the drive. My enclosure didn't come with anything like that, and there doesn't seem to be a way to connect to my drive (my old drive is a seagate 500gb momentus 7200 RPM). My laptop is about 2 years old now (MBP 17"). The drive doesnt' have pins to connect, it has a wide plug type connector, and a USB connector also (I was able to directly plugin the USB cable to the drive, but didn't connect it to my computer, was just testing thigns out). Is it safe for me to directly connect the cable that came with the enclosure to the drive, and then connect the other end to my computer? Does this single cable provide power and data transfer?

    Read the article

< Previous Page | 205 206 207 208 209 210 211 212 213 214 215 216  | Next Page >