Search Results

Search found 17625 results on 705 pages for 'techno log'.

Page 209/705 | < Previous Page | 205 206 207 208 209 210 211 212 213 214 215 216  | Next Page >

  • MSSQL:Ultimate configuration for rebuilding indexes+statistics

    - by Niels Bosma
    My database is growing slower even though I have a bunch of indexes setup. Yesterday I figured out that I need to setup a maintenance plan to build the indexes etc. So my question is what's the ultimate configuration for this? Do I need All: "Rebuild idex task", "Reorganize index task" and "update statistics task". Anything else I need to setup. Shrink database? (Today, the only maintenance plans I have is backup) Does it matter in what order I run them? Any configuration options I should be aware of? I've read of problems with log growing wild, how do I fix that? My transaction log is quite small and is usually a problem for me. -

    Read the article

  • ubuntu apache2 start, stop, status, restart and reload commands fails

    - by Assil
    Hi, I am new to Ubuntu and I'm still trying to figure this OS out (for work it's brilliant, better than Windows). Before I wrote this question, I did my research via Google, this website and even in StackOverflow.com. Whatever error came up, I googled it but with no success on how to solve this. Back to the main point: I tried to install (lamp) apache2 with this guide (in German) and this one(in english). Then I got stuck at the start command (with which one is able to start the apache2 server), my first try to run the server was a success until i wrote sudo /etc/init.d/apache2 reload then it showed me an error: $ sudo /etc/init.d/apache2 reload * Starting web server apache2 Syntax error on line 1 of /etc/apache2/ports.conf: Invalid command 'oder', perhaps misspelled or defined by a module not included in the server configuration Action 'reload' failed. The Apache error log may have more information. [fail] I didn't even write the word "oder" so I closed the shell and opened it anew. It showed the same error. After that, I've done some research and found out that my file (index.html (which is in my /var/www folder)), which I access via the browser, when I type in http://localhost should show up and tell that it was a success. So I removed apache2 and installed it again but now the following errors appear: $ sudo /etc/init.d/apache2 start * Starting web server apache2 Syntax error on line 1 of /etc/apache2/ports.conf: Invalid command 'oder', perhaps misspelled or defined by a module not included in the server configuration Action 'start' failed. The Apache error log may have more information. [fail] And still, I didn't even write "oder" in the command. I appreciate every help I can get, further thanks and have a nice day.

    Read the article

  • Strange IIS/Asp.net Exception Message

    - by Element
    I have a standard asp.net 2.0 application running on IIS 6. I have noticed some strange exception messages in the logs. They seem to be caused by random spam bots trying to submit forms. They are strange because the request string is huge and all the exception details in the event manager are messed up, they have been replaced with %21,%22, etc.. as seen in the screen shot. Is this some kind of exploit or just a bug in the asp.net exception handler/logger ? UPDATE: I traced the requests that are causing this strange log event to a bug in IE8 that causes it to request scriptresource.axd?d={html from page} as described in these links: MS Connect SO - Invalid Webresource.axd SO - IE8 Dropping Memory Pages I am still not sure why these requests would break the IIS log event like seen above, they are just long strings of jiberish being sent to the server, maybe someone reading this can shed some light on it.

    Read the article

  • Visual Studio Agents 2012 on Server 2003 SP2

    - by Corith Malin
    I'm attempting to build out our Lab Manager with TFS 2012. On a virtual machine running Server 2003 SP2 32bit, I'm attempting to install the Visual Studio Agents 2012 and am running into an error: Setup Failed! Install cannot continue because some required components failed. Microsoft .NET Framework 4.5 Asia Looking into it, the install log is erroring when it's attempting to install dotNetFx45_Full_x86_x64.exe component. Looking at that install log, it is failing with: The .NET Framework 4.5 is not supported on this operating system. So, I see according to the Agents 2012 MSDN documentation, that Server 2003 SP2 is supported by Agents 2012. But I also see that according to the .NET 4.5 MSDN documentation, Server 2003 isn't supported. So how do I install Agents 2012 on 2003 SP2 as the documentation implies I can?

    Read the article

  • Mac OS X bash prompt bug?

    - by Memo
    I am trying to set my bash prompt to display the time and current directory in bold: export PS1="\[\e[1m\][\A] \w \$ \[\e[0m\]" This does apparently work, but when I use the command history (ctrl-r), after finding the command I was searching for and pressing enter, this line is not displayed correctly. Here is an example: [21:58] ~/Wyona/svn-repos/zwischengas $ (reverse-i-search)`ta': tail -F logs/log4j-cnode1.log becomes, after pressing enter: [21:58] ~/Wyona/svn-repos/zwischengas $ -F logs/log4j-cnode1.log Of course, this is not "really" a problem, since the command does work correctly, but it is still annoying. Does anybody know why this happens? And, more importantly, how to prevent/fix it? Thanks, Memo

    Read the article

  • Configuration Manager Setting Causing Error PRJ0019

    - by Jeff Paterno
    Recently I ran into an issue with a project failing to build on an automated build server using CruiseControl. When I looked into the build log I saw that the Post-Build project was failing with the error message: "error PRJ0019: A tool returned an error code from "Performing Post-Build Event..." This was most frustrating especially since the solution was building without issue on my local development environment. The Post-Build project was a C++ project that basically called several batch files to unregister/register assemblies, copy resources and supporting files, and place other dependencies in the GAC. I decided to run each of the batch files manually to see if that would provide more information as to why this project was failing. This lead me to determine that the batch file that was placing assemblies in the GAC was the culprit and that it was failing to find a particular assembly. The missing assembly was the output of another project. The project that was not producing the expected output was another C++ project that called a batch file. This batch process was actually embedding resource files into an assembly and then copying the assembly to the expected location. The real confusion started when I looked back into my Subversion log and noted that nothing had changed in this project in more than 2 months! It was almost as if the project had stopped building altogether. But what would cause that?! The Configuration Manager, obviously! Checking the solution's Configuration Manager settings, I found that the project that was not producing any output was in fact not selected to be part of the build process when the "Any CPU" platform was selected. This was the problem! I had recently updated the CruiseControl configurations to force the solution to be built targeting the platform "Any CPU". As a result, the project that was at the root of the problem was not configured to be built and the post-build process was failing when it couldn't find what it needed.

    Read the article

  • Using SSH to find access to a problematic script in logs of multiple domains

    - by Hanan Cohen
    I run several (~20) sites on a Dreamhost VPS. Lately I max my memory allocation for the VPS and I want to find the problem. I would like to have an SSH script that will scan all the log files of all the domains and show me what object (image, php script etc) gets lots of calls. It will count the calls in each /logs/*/http/access.log, do an descending sort and show me the top 10 across domains. But I don't know how to do that. Can it be done? Can anyone suggest a script that will do that? Thanks. (Cross posted to Stack Overflow)

    Read the article

  • Why might apache2 use 100% of CPU at startup?

    - by QuantumMechanic
    This is apache 2.2.14 on SLES9. Out of nowhere (i.e. it had been working fine for ages) I am seeing apache2 suddenly start using 100% of the CPU at startup, and never completing startup. Nothing is getting written to /var/log/error_log (when it did back when things were OK). ps only shows the main httpd process and not any of the spawned threads. When things were OK, it would show the spawned threads. So it appears httpd is going into some sort of infinite loop right at startup and isn't even completing startup. It's not an issue of being overloaded by connections -- this happens even when nothing is trying to contact it. The config files haven't changed (or at least they haven't changed in a way that changed their last-modified time). I've tried added -e debug -E /var/log/apache2/startup_info to the command line, but nothing is put in the file. Any ideas what could be happening?

    Read the article

  • Can't run node.js script on server reboot

    - by webstyle
    I need to listen events on port 3240 and I'm using node.js for that purpose. I need to execute my script with forever tool. I also need to run forever on server reboot. When I run forever glh.js everything works: forever list says there is a running process. But when I'm trying to run forever on server reboot I can't get it working. I've created a file in /etc/init.d with the following content: #!/bin/bash /var/www/yan/data/gitlabhook/runglh.sh &>/var/www/yan/data/gitlabhook/runglh.log When I reboot the server, the output log is the following (the same as when I run it manually via console): info: Forever processing file: glh.js But in this case forever doesn't start a process. forever list outputs: info: No forever processes running

    Read the article

  • How to install SIP+PyQt with apt-get + pip + virtualenv?

    - by kjo
    [I originally posted this question, under a different title, in StackOverflow (here), but later I realized that my problem is very specific to apt-get, hence I am re-posting it here. Sorry for the duplication.] I'm trying to install PyQt on Ubuntu (and within a virtualenv). The list of obstacles I'm dealing with is far too long to include here, but the one I'm currently trying to get past is this: % workon myvenv (myvenv)% cd ~/.virtualenvs/myvenv/build/pyqt (myvenv)% python ./configure.py Traceback (most recent call last): File "./configure.py", line 32, in <module> import sipconfig OK, so let's install sipconfig... (myvenv)% pip install SIP Downloading/unpacking SIP Downloading sip-4.14.8-snapshot-02bdf6cc32c1.zip (848Kb): 848Kb downloaded Running setup.py egg_info for package SIP Traceback (most recent call last): File "<string>", line 14, in <module> IOError: [Errno 2] No such file or directory: '/home/yt/.virtualenvs/myvenv/build/SIP/setup.py' Complete output from command python setup.py egg_info: Traceback (most recent call last): File "<string>", line 14, in <module> IOError: [Errno 2] No such file or directory: '/home/yt/.virtualenvs/myvenv/build/SIP/setup.py' ---------------------------------------- Command python setup.py egg_info failed with error code 1 in /home/yt/.virtualenvs/myvenv/build/SIP Storing complete log in /home/yt/.pip/pip.log The only recipe I've found so far installing SIP is this % python configure.py % make % sudo make install ...but this recipe goes against my policy of doing all my Ubuntu installations either through apt-get (or through pip in the case of Python modules). Is there some way that I can install SIP with apt-get (and possibly pip)?

    Read the article

  • How do I encrypt but share a number of folders?

    - by d3vid
    I want to achieve the following functionality. Is it possible? Boot up computer (possibly via WakeOnLan or WakeOnPlan). Either be automatically logged in, or log in via login screen, or log in remotely. I change this behavior occasionally, so full disk encryption wouldn't work for me because it requires a password on bootup (which would it would prevent the remote bootup options, and the automatic login option). I am only interested in encrypting data, not the entire harddrive. Once logged in either: a launcher/tray icon is available to launch encryption app (preferred) run encryption app from the dash Prompted to unlock encrypted folder(s) individually. Unlocked folders are available to: me, apps I am running (e.g. editors, SpiderOak) Ideally, folders that I share with bindfs can be locked/unlocked by other users too. A key point is that once I have unlocked an encrypted folder, I don't want to have to think about it again. I currently achieve this via TrueCrypt (except for the last part). Unfortunately TrueCrypt isn't well integrated with Ubuntu (licensing issues prevent Debian from including it in their repo, the interface isn't quite integrated with Unity, setting it as a startup app doesn't quite work, sharing encrypted folders isn't really part of its design). Is there an alternative to TrueCrypt that is better integrated with the Ubuntu GUI and would suit this workflow?

    Read the article

  • Exim - Sender verify failed - rejected RCPT

    - by Newtonx
    While checking on Exim's log messages I found many entries of the following message "Sender verify failed" "rejected RCPT" ... I 'm not an exim expert... I'm afraid Exim is not delivering 100% emails to recipients, because our Email Marketing Application its getting a lower OPEN RATE. Can someone helpe understand this log messages? Is it my server saying "No Such User Here" or a remote server? 174.111.111.11 represents my server IP. Thanks Exim log 2010-10-02 14:00:19 SMTP connection from myserverdomain.com.br () [174.111.111.11]:54514 I=[174.111.111.11]:25 closed by QUIT 2010-10-02 14:00:19 SMTP connection from [174.111.111.11]:54515 I=[174.111.111.11]:25 (TCP/IP connection count = 2) 2010-10-02 14:00:19 H=myserverdomain.com.br () [174.111.111.11]:54515 I=[174.111.111.11]:25 Warning: Sender rate 672.4 / 1h 2010-10-02 14:00:19 H=myserverdomain.com.br () [174.111.111.11]:54515 I=[174.111.111.11]:25 sender verify fail for <[email protected]>: No Such User Here 2010-10-02 14:00:19 H=myserverdomain.com.br () [174.111.111.11]:54515 I=[174.111.111.11]:25 F=<[email protected]> rejected RCPT <[email protected]>: Sender verify failed 2010-10-02 14:00:19 SMTP connection from myserverdomain.com.br () [174.111.111.11]:54515 I=[174.111.111.11]:25 closed by QUIT 2010-10-02 14:00:19 SMTP connection from [174.111.111.11]:54516 I=[174.111.111.11]:25 (TCP/IP connection count = 2) 2010-10-02 14:00:19 H=myserverdomain.com.br () [174.111.111.11]:54516 I=[174.111.111.11]:25 Warning: Sender rate 673.3 / 1h 2010-10-02 14:00:19 H=myserverdomain.com.br () [174.111.111.11]:54516 I=[174.111.111.11]:25 sender verify fail for <[email protected]>: No Such User Here 2010-10-02 14:00:19 H=myserverdomain.com.br () [174.111.111.11]:54516 I=[174.111.111.11]:25 F=<[email protected]> rejected RCPT <[email protected]>: Sender verify failed 2010-10-02 14:00:19 SMTP connection from myserverdomain.com.br () [174.111.111.11]:54516 I=[174.111.111.11]:25 closed by QUIT 2010-10-02 14:00:19 SMTP connection from [174.111.111.11]:54517 I=[174.111.111.11]:25 (TCP/IP connection count = 2) 2010-10-02 14:00:19 H=myserverdomain.com.br () [174.111.111.11]:54517 I=[174.111.111.11]:25 Warning: Sender rate 674.3 / 1h 2010-10-02 14:00:20 H=myserverdomain.com.br () [174.111.111.11]:54517 I=[174.111.111.11]:25 sender verify fail for <Luciene_souza_vasconcellos=hotmail.com--2723--bounce@e-mydomain.com.br>: No Such User Here 2010-10-02 14:00:20 H=myserverdomain.com.br () [174.111.111.11]:54517 I=[174.111.111.11]:25 F=<Luciene_souza_vasconcellos=hotmail.com--2723--bounce@e-mydomain.com.br> rejected RCPT <[email protected]>: Sender verify failed

    Read the article

  • ASP.NET MVC WebService - Security for Industrial Android Clients

    - by Chris Nevill
    I'm trying to design a system that will allow a bunch of Android devices to securely log into an ASP.NET MVC REST Web service. At present neither side are implemented. However there is an ASP.NET MVC website which the web service will site along side. This is currently using forms authentication. The idea will be that the Android devices will download data from the web service and then be able to work offline storing data in their own local databases, where users will be able to make updates to that data, and then syncing updates back to the main server where possible. The web service will be using HTTPS to prevent calls being intercepted and reduce the risk of calls being intercepted. The system is an industrial system and will not be in used by the general Android population. Instead only authorized Android devices will be authorized by the Web Service to make calls. As such I was thinking of using the Android devices serial number as a username and then a generated long password which the device will be able to pick up - once the device has been authorized server side. The device will also have user logins - but these will not be to log into the web service - just the device itself - since the device and user must be able to work offline. So usernames and passwords will be downloaded and stored on the devices themselves. My question is... what form of security is best setup on the web service? Should it use forms Authentication? Should the username and password just be passed in with each GET/POST call or should it start a session as I have with the website? The Android side causes more confusion. There seems to be a number of options here Spring-Android, Volley, Retrofit, LoopJ, Robo Spice which seems to use the aforementioned Spring, Retrofit or Google HttpClient. I'm struggling to find a simple example which authenticates with a forms based authentication system. Is this because I'm going about this wrong? Is there another option that would better suite this?

    Read the article

  • Is there a way to display navmesh agent path in Unity?

    - by Antoine Guillien
    I'm currently making a prototype for a game I plan to develop. As far as I did, I managed to set up the navigation mesh and my navmeshagents. I would like to display the path they are following when setDestination() is fired. I did some researches but didn't find anything about it. EDIT 1 : So I instantiate an empty object with a LineRenderer and I have a line bewteen my agent and the destination. Still I've not all the points when the path has to avoid an obstacle. Furthermore, I wonder if the agent.path does reflect the real path that the agent take as I noticed that it actually follow a "smoothier" path. Here is the code so far : GameObject container = new GameObject(); container.transform.parent = agent.gameObject.transform; LineRenderer ligne = container.AddComponent<LineRenderer>(); ligne.SetColors(Color.white,Color.white); ligne.SetWidth(0.1f,0.1f); //Get def material ligne.gameObject.renderer.material.color = Color.white; ligne.gameObject.renderer.material.shader = Shader.Find("Sprites/Default"); ligne.gameObject.AddComponent<LineScript>(); ligne.SetVertexCount(agent.path.corners.Length+1); int i = 0; foreach(Vector3 v in p.corners) { ligne.SetPosition(i,v); //Debug.Log("position agent"+g.transform.position); //Debug.Log("position corner = "+v); i++; } ligne.SetPosition(p.corners.Length,agent.destination); ligne.gameObject.tag = "ligne"; So How can I get the real coordinates my agent is going to walk throught ?

    Read the article

  • Best SQL Server Configuration with this hardware.

    - by DavidStein
    I just received my new SQL Server from Dell. The server will be serve approximately 15 OLTP databases which average 10GB in size. Here are the basic specs: Dell PowerEdge R510 with up to 12 Hot Swap HDDs,LED Intel Xeon E5649 2.53GHz, 12M Cache, 5.86 GT/s QPI, 6 core (Quantity of 2) 48GB Memory (6x8GB), 1333MHz Dual Ranked RDIMMs for 2 Processors, Optimized PERC H700 Integrated RAID Controller, 1GB NV Cache 300GB 15K RPM SA SCSI 6Gbps 3.5in Hotplug Hard Drive (Quantity of 4) 600GB 15K RPM SA SCSI 6Gbps 3.5in Hotplug Hard Drive (Quantity of 6) My first thought was to use 3 arrays. OS - Raid 1 - (2)300GB T-Log - Raid 1 (2)300GB DB - Raid 5 (5) 600GB Backup - (1) 600GB - non-raided. However, I could also do the following after purchasing one more drive for backup. OS and T-Log - Raid 10 - (4)300GB DB - Raid 10 (6)600GB The hard drive space is not an issue as the databases are not that large. I'm just trying to optimize the speed of the applications using these databases. So, what would you guys recommend?

    Read the article

  • Apache, Rewrite Rule and Directories

    - by milo5b
    my sites-available/ file looks something like the following: <VirtualHost *:80> ServerAdmin webmaster@mysite ServerName mysite.co.uk ServerAlias www.mysite.co.uk DocumentRoot /home/mysite.co.uk/htdocs/ <Directory /home/mysite.co.uk/htdocs/> Options -Indexes FollowSymlinks MultiViews AllowOverride All Order allow,deny allow from all </Directory> ErrorLog ${APACHE_LOG_DIR}/mysite.co.uk/error.log LogLevel warn CustomLog ${APACHE_LOG_DIR}/mysite.co.uk/access.log combined </VirtualHost> In .htaccess (in the htdocs/), I have (amongst others) the following rewrite rule: RewriteRule ^enquiries$ /enquiries.php Somehow I have also a directory named "enquiries" (/home/mysite.co.uk/htdocs/enquiries/), and when I hit the url "www.mysite.co.uk/enquiries" I get: HTTP/1.1 301 Moved Permanently Date: Mon, 10 Dec 2012 18:53:37 GMT Server: Apache/2.2.16 (Debian) Location: http://www.mysite.co.uk/enquiries/ Vary: Accept-Encoding Content-Type: text/html; charset=iso-8859-1 And a Browser would display the directory's content. Now, I could easily rename the folder and get it sorted, but I would like to understand what's going on here. What would be the correct way to configure Apache in a way that it wont behave this way, and instead would listen to the Rewrite Rule? If I did not explain myself clearly, please feel free to ask more questions, I'd be happy to answer them. Thanks!

    Read the article

  • HAProxy + Percona XtraDB Cluster

    - by rottmanj
    I am attempting to setup HAproxy in conjunction with Percona XtraDB Cluster on a series of 3 EC2 instances. I have found a few tutorials online dealing with this specific issue, but I am a bit stuck. Both the Percona servers and the HAproxy servers are running ubuntu 12.04. The HAProxy version is 1.4.18, When I start HAProxy I get the following error: Server pxc-back/db01 is DOWN, reason: Socket error, check duration: 2ms. I am not really sure what the issue could be. I have verified the following: EC2 security groups ports are open Poured over my config files looking for issues. I currently do not see any. Ensured that xinetd was installed Ensured that I am using the correct ip address of the mysql server. Any help with this is greatly appreciated. Here are my current config Load Balancer /etc/haproxy/haproxy.cfg global log 127.0.0.1 local0 log 127.0.0.1 local1 notice maxconn 4096 user haproxy group haproxy debug #quiet daemon defaults log global mode http option tcplog option dontlognull retries 3 option redispatch maxconn 2000 contimeout 5000 clitimeout 50000 srvtimeout 50000 frontend pxc-front bind 0.0.0.0:3307 mode tcp default_backend pxc-back frontend stats-front bind 0.0.0.0:22002 mode http default_backend stats-back backend pxc-back mode tcp balance leastconn option httpchk server db01 10.86.154.105:3306 check port 9200 inter 12000 rise 3 fall 3 backend stats-back mode http balance roundrobin stats uri /haproxy/stats MySql Server /etc/xinetd.d/mysqlchk # default: on # description: mysqlchk service mysqlchk { # this is a config for xinetd, place it in /etc/xinetd.d/ disable = no flags = REUSE socket_type = stream port = 9200 wait = no user = nobody server = /usr/bin/clustercheck log_on_failure += USERID #only_from = 0.0.0.0/0 # recommended to put the IPs that need # to connect exclusively (security purposes) per_source = UNLIMITED } MySql Server /etc/services Added the line mysqlchk 9200/tcp # mysqlchk MySql Server /usr/bin/clustercheck # GNU nano 2.2.6 File: /usr/bin/clustercheck #!/bin/bash # # Script to make a proxy (ie HAProxy) capable of monitoring Percona XtraDB Cluster nodes properly # # Author: Olaf van Zandwijk <[email protected]> # Documentation and download: https://github.com/olafz/percona-clustercheck # # Based on the original script from Unai Rodriguez # MYSQL_USERNAME="testuser" MYSQL_PASSWORD="" ERR_FILE="/dev/null" AVAILABLE_WHEN_DONOR=0 # # Perform the query to check the wsrep_local_state # WSREP_STATUS=`mysql --user=${MYSQL_USERNAME} --password=${MYSQL_PASSWORD} -e "SHOW STATUS LIKE 'wsrep_local_state';" 2>${ERR_FILE} | awk '{if (NR!=1){print $2}}' 2>${ERR_FILE}` if [[ "${WSREP_STATUS}" == "4" ]] || [[ "${WSREP_STATUS}" == "2" && ${AVAILABLE_WHEN_DONOR} == 1 ]] then # Percona XtraDB Cluster node local state is 'Synced' => return HTTP 200 /bin/echo -en "HTTP/1.1 200 OK\r\n" /bin/echo -en "Content-Type: text/plain\r\n" /bin/echo -en "\r\n" /bin/echo -en "Percona XtraDB Cluster Node is synced.\r\n" /bin/echo -en "\r\n" else # Percona XtraDB Cluster node local state is not 'Synced' => return HTTP 503 /bin/echo -en "HTTP/1.1 503 Service Unavailable\r\n" /bin/echo -en "Content-Type: text/plain\r\n" /bin/echo -en "\r\n" /bin/echo -en "Percona XtraDB Cluster Node is not synced.\r\n" /bin/echo -en "\r\n" fi

    Read the article

  • How to facilitate code reviews in a small team for embedded software?

    - by Adam Lewis
    Short Question Does a cost-effective tool / workflow exist to facilitate code reviews in a small team? More specifically, a small team that relies on post-commit code reviews. Background Our team currently consists of 3 full time and 1 part time software engineers, with plans on hiring more in the near future. Due to our team size and volume of projects we all must juggle, the pre-commit workflow that major tools (such as Review Board and Code Collaborator) use is not obtainable for us right now. The best we can do at the moment is to perform post-commit reviews before major releases or as time permits. Nearly all of our projects are hosted on RepositoryHosting.com (which I highly recommend) and contain a mixture of SVN and GIT repositories. Current Thoughts Since I cannot find a tool that fits our needs right now, I am turning to TRAC that is built into our repository's site. At the moment we use TRAC to file tickets and track milestones, so to me this seems like a natural fit for code review results as well. The direction I am heading in right now is to use a spread sheet(s) to log all of the bugs and comments. Do some macro magic to get it in a format that I can use TRAC's import ticket method and use TRAC's ticketing system to create the action items / bug reports automatically. The auto ticket generation is darn near a must have, adding in bugs and comments one at a time from a web-gui is really painful. Secondary Question If this workflow makes sense, is there a good / standard template to use as a code review log?

    Read the article

  • Link to article on website libraries

    - by acidzombie24
    I just started another website and it has taken me 30mins to copy/paste my other website and delete stuff because I don't have a template. Theres lots of features I copied over that I haven't seen in libraries/templates. But I don't really know any libraries/templates. This site is ASP.NET. Some things I have is a string.format that escapes strings for HTML (so <hi> is text instead of a tag). Other features are adding or removing items in the url query, a class to pass in a ASP.NET error and log or convert it into a row in a db (I know about elmah but during development on my last site it wasn't Mono compatible), a mini AJAX library for success/fail/redirect/etc, a class to pass in a ASP.NET error and log or convert it into a row in a db and anything else I would use in every site. I don't like my (library) design because I wasn't expecting to do more then 2-3 websites and I am on my 5th. I don't know proper ASP.NET either so what is an article that explains how to make a great library/template for websites?

    Read the article

  • I have a bad install of Windows on another hard drive and it won't let me install a fresh copy. How do I fix it in Ubuntu 12.04?

    - by Dana LaBerge
    Basically, there was a security issue in the drivers for my graphics card. It was a 64-bit card and I installed 32-bit Windows. Apparently, before SP1 was available, which fixed that issue, 6 trojan horses got in. They stopped SP1 from installing. After going through the ringer several times, I finally talked to a person who knew the problem. It was something about how the drivers tried to transfer between the 32-bit OS and the 64-bit card that left me open. Ever since, my computer has been slow and has had weird issues. Like tinypic wouldn't ever load. Also, certain programs wouldn't install. So I eventually talk to the dude that knew the problem and he takes the reigns and does some diagnostics. He tells me that to fix it I have to format the hard drive and do a fresh install. I'm okay with that because I was planning on it anyway, to upgrade to the 64-bit version. The problem is, how do I do that? I have the disk to install the new copy, but when I go to install it, it tells me I can't and to check the log file. However, I don't know where that log file is, and it wiped my install of Windows out. How do I find the file and as a different route to get to the goal, how do I zero out the drive from Ubuntu 12.04? (I installed the 64-bit version just the other day)

    Read the article

  • PostgreSQL won't start anymore

    - by Sander Declerck
    Today, my PostgreSQL doesn't start anymore on my windows machine... I've tried to start the service in windows services and got the following error: Windows could not start the PostgreSQL Database Server 8.3 service on Local Computer. Error 1053: The service did not respond to the start or control request in a timely fashion. Then I went to the command line to manually start C:/Program Files (x86)/PostgreSQL/8.3/bin/psql.exe, and then I got this error: psql: Could not connect to server: Connection refused (0x0000274D/10061) Is the server running on host "???" and accepting TCP/IP connections on port 5432? Edit: I found this in the logs: 2011-04-22 13:13:16 CEST LOG: could not receive data from client: No connection could be made because the target machine actively refused it. 2011-04-22 13:13:16 CEST LOG: unexpected EOF on client connection

    Read the article

  • Why are my at jobs running immediately on OS X?

    - by Gabe
    I want to schedule events for exact times in Mac OS X. It seems like the 'at' command is the simplest way to do this. I have enabled atrun using the command: launchctl load -w /System/Library/LaunchDaemons/com.apple.atrun.plist To test at, I'm using the following one-line BASH script: echo 'foo' path/to/log.txt | at now + 2 minutes When I run the script, I get output like: job 17 at Sat May 15 12:57:00 2010 where '12:57:00' is indeed 2 minutes in the future. But the echo command executes immediately: the line 'foo' is added to log.txt right away. How can I make at work for me?

    Read the article

  • "Serious errors found HF checking the drive for /home" After Moving /home to external HFSplus partition

    - by Arctic Shadow
    I just installed Mac OS X 10.7 "Lion" and Ubuntu 11.10 on my MacBook Pro. Using these instructions: tuxation.com/creating-home-partition-mac-linux.html . After changing the location of my home folder to the new location, it gives me the error in the title, and my username no longer appears in the login screen. Using the "Other" option with my username seems to make it try to log in, but the screen quickly flashes between blank and a shell before kicking me back to the login screen without notice. I'm trying to share my home folder between Mac OS X and Ubuntu, using an hfsplus partition (unjournaled) between the two. The home partition seems to mount fine as /home, and I am able to modify it under Ubuntu. Below is the line I've added to fstab: /dev/sda3 /home hfsplus defaults 0 1 I should also note that I changed my account's username and home directory location to match this, though I've double checked that and everything seems in order there... Thank you in advance for any assistance. Edit: It seems that the /etc/passwd file didn't have my new home directory's location in it, so I changed that, and I am now able to log into my account, although I am still not listed in the login screen, and my username in the menu on the top right shows up as "[Invalid UTF-8]"...

    Read the article

  • How to resolve "HTTP/1.1 403 Forbidden" errors from iCal/CalDAV server after upgrade to Snow Leopard Server?

    - by morgant
    We recently upgraded our Open Directory Master & Replica to Mac OS X 10.6.4 Snow Leopard Server. We had a mismatched server FQDN & LDAP Search Base/Kerberos Realm, so we exported all users & groups, created the new Open Directory Master w/matching FQDN & Search Base/Realm, reimported users & groups, and re-bound all servers & workstations to the new OD Master. At the same time as all of this, we upgraded our iCal/CalDAV server to Mac OS X 10.6.4 Snow Leopard Server. Ever since doing so, we've seen the following issues with our iCal/CalDAV server and iCal clients on both Mac OS X 10.5 Leopard & Mac OS X 10.6: If a user attempts to move or delete an event (single or repeating) that was created prior to the upgrade to 10.6 Server, they get the following error: Access to "blah" in "blah" in account "blah" is not permitted. The server responded: "HTTP/1.1 403 Forbidden" to operation CalDAVWriteEntityQueueableOperation. New users added to the directory get the following error when attempting to add their account to in iCal's preferences: The user "blah" has no configured pricipals. Confirm with your network administrator that your account has at least one CalDAV principal configured. Interestingly, we've since discovered that users seem to be able to delete individual events from an old repeating event without error, but that's a massive amount of work to get rid of a repeating event. I will note that we have not yet added an SRV record in DNS as instructed on page 19 of iCal_Server_Admin_v10.6.pdf. Further Investigation: In this particular case, a user is attempting to decline repeating events created prior to the upgrade to Snow Leopard Server. Granting the user full write access with sudo calendarserver_manage_principals --add-write-proxy users:user1 users:user2 (which did work) doesn't allow deletion of the events. Still get the usual error: Access to "blah blah" in "blah blah" in account "blah blah" is not permitted. The server responded: "HTTP/1.1 403 Forbidden" to operation CalDAVWriteEntityQueueableOperation. The error that shows up in /var/log/caldavd/error.log on the iCal Server when attempting to delete one of the events is: 2011-03-17 15:14:30-0400 [-] [caldav-8009] [PooledMemCacheProtocol,client] [twistedcaldav.extensions#info] PUT /calendars/__uids__/XXXXXXXX-XXXX-XXXX-XXXX-XXXXXXXXXXXX/calendar/XXXXXX-XXXX-XXXX-XXXX-XXXXXXXXXXXX.ics HTTP/1.1 2011-03-17 15:14:30-0400 [-] [caldav-8009] [PooledMemCacheProtocol,client] [twistedcaldav.scheduling.implicit#error] Cannot change ORGANIZER: UID:XXXXXXXX-XXXX-XXXX-XXXX-XXXXXXXXXXXX And the error in /var/log/system.log on the client is: Mar 17 15:14:30 192-168-21-169-dhcp iCal[33509]: CalDAV CalDAVWriteEntityQueueableOperation failed: status 'HTTP/1.1 403 Forbidden' request:\n\nBEGIN:VCALENDAR^M\nVERSION:2.0^M\nPRODID:-//Apple Inc.//iCal 3.0//EN^M\nCALSCALE:GREGORIAN^M\nBEGIN:VTIMEZONE^M\nTZID:US/Eastern^M\nBEGIN:DAYLIGHT^M\nTZOFFSETFROM:-0500^M\nTZOFFSETTO:-0400^M\nDTSTART:20070311T020000^M\nRRULE:FREQ=YEARLY;BYMONTH=3;BYDAY=2SU^M\nTZNAME:EDT^M\nEND:DAYLIGHT^M\nBEGIN:STANDARD^M\nTZOFFSETFROM:-0400^M\nTZOFFSETTO:-0500^M\nDTSTART:20071104T020000^M\nRRULE:FREQ=YEARLY;BYMONTH=11;BYDAY=1SU^M\nTZNAME:EST^M\nEND:STANDARD^M\nEND:VTIMEZONE^M\nBEGIN:VEVENT^M\nSEQUENCE:5^M\nDTSTART;TZID=US/Eastern:20090117T094500^M\nDTSTAMP:20081227T143043Z^M\nSUMMARY:blah blah^M\nATTENDEE;CN="First Last";CUTYPE=INDIVIDUAL;ROLE=REQ-PARTICIPANT:urn:uuid^M\n :XXXXXXXX-XXXX-XXXX-XXXX-XXXXXXXXXXXX^M\nATTENDEE;CN="First Last";CUTYPE=INDIVIDUAL;PARTSTAT=ACCEPTED:mailto:user@d^M\n omain.tld^M\nEXDATE;TZID=US/Eastern:20110319T094500^M\nDTEND;TZID=US/Eastern:20090117T183000^M\nRRULE:FREQ=WEEKLY;INTERVAL=1^M\nTRANSP:OPAQUE^M\nUID:XXXXXXXX-XXXX-XXXX-XXXX-XXXXXXXXXXXX^M\nORGANIZER;CN="First Last":mailto:[email protected]^M\nX-WR-ITIPSTATUSML:UNCLEAN^M\nCREATED:20110317T191348Z^M\nEND:VEVENT^M\nEND:VCALENDAR^M\n\n\n... response:\nHTTP/1.1 403 Forbidden^M\nDate: Thu, 17 Mar 2011 19:14:30 GMT^M\nDav: 1, access-control, calendar-access, calendar-schedule, calendar-auto-schedule, calendar-availability, inbox-availability, calendar-proxy, calendarserver-private-events, calendarserver-private-comments, calendarserver-principal-property-search^M\nContent-Type: text/xml^M\nContent-Length: 134^M\nServer: Twisted/8.2.0 TwistedWeb/8.2.0 TwistedCalDAV/2.5 (iCal Server v12.56.21)^M\n^M\n<?xml version='1.0' encoding='UTF-8'?><error xmlns='DAV:'>^M\n <valid-attendee-change xmlns='urn:ietf:params:xml:ns:caldav'/>^M\n</error> One thing I have noticed, and I'm not sure if this has any real effect is that in many of these pre-Snow Leopard Server migration events, the ORGANIZER is specified like the following: ORGANIZER;CN=First Last:mailto:[email protected] But newer ones are more like one of the two following: ORGANIZER;CN=First Last;[email protected];SCHEDULE-STATUS=1 ORGANIZER;CN=First Last;[email protected]:urn:uuid:XXXXXXXX-XXXX-XXXX-XXXX-XXXXXXXXXXXX iCal_Server_Admin_v10.6.pdf notes that the ".db.sqlite" files are completely disposable, they're merely a performance cache and are re-built on the fly, so are safe to delete. I did delete the one for the organizer's calendars and it took longer to process the attempted event delete while it rebuilt the database, but still errored out in the end. FWIW the error is thrown by this code: https://trac.calendarserver.org/browser/CalendarServer/trunk/twistedcaldav/scheduling/implicit.py Any further suggestions? I see lots of questions about this in my Google searches, but not solutions and this is a widespread problem on our iCal Server. Now, we mostly try to get users to ignore them (hence the amount of time this question has been open), but every now and then I dig in deeper trying to find the culprit and/or solution.

    Read the article

  • bash code in rc.local not excuting after bootup

    - by mrTomahawk
    Does anyone know why a system would not execute the script code within rc.local on bootup? I have a post configuration bash script that I want to run after the initial install of VMware ESX (Red Hat), and for some reason it doesn't seem to execute. I have the setup to log its start of execution and even its progress so that I can see how far it gets in case it fails at some point, but even when I look at that log, I am finding that didn't even started the execution of the script code. I already checked to see that script has execution permissions (755), what else should I be looking at? Here is the first few lines of my code: #!/bin/sh echo >> /tmp/configLog "" echo >> /tmp/configLog "Entering maintenance mode"

    Read the article

< Previous Page | 205 206 207 208 209 210 211 212 213 214 215 216  | Next Page >