Search Results

Search found 12144 results on 486 pages for 'the old toxophilist'.

Page 209/486 | < Previous Page | 205 206 207 208 209 210 211 212 213 214 215 216  | Next Page >

  • Windows 7 video driver for Intel 82865G graphics chipset

    - by Nick Kavadias
    I have an old Dell Inspirion 3000 which came with Windows XP. It's still quite decent, 3 GHz P4, 2 GB RAM. I've installed windows 7 RTM (x86) & the best resolution it will do is 640x480 with a generic driver. It has an integrated Intel 8265G graphics card, and only PCI slots on the motherboard. I cannot stick another graphics card on it. Can I get a working driver for Windows 7? Official Dell website only lists XP drivers Am I destined to have the suckiness of XP on this computer forever?

    Read the article

  • Re-Calibrate Toshiba battery meter with Windows 7

    - by Mark Henderson
    I have a Toshiba U300 laptop. Back in the olden days (circa-2000) you could re-calibrate the battery meter from the BIOS when your battery was no longer reading accurately. My battery was shot, so I bought a brand new one, however Windows 7 still seems to count down the battery life in at the same speed as the old one did. This time, when it alleged 0%, I turned the laptop back on and got another 90 minutes of life out of it, at 0%. Is there a tool or utility for Toshiba laptops that can fix it back to being accurate? I've read the other threads on SU about cycling the battery but that just doesn't seem to do it in this case. Update: After the last cycle, the battery meter now reads 100% but the indicator on the front of the laptop is still orange (indicating not fully charged)

    Read the article

  • Switching glassfish 2.x to 3.1.1

    - by Alexandre Abreu
    So I am managing a old java project that is using glassfish 2.x. Seems like netbeans does not support 2.x versions any more, so I want to change it to 3.1.1. How to properly make that change? I have JDK 1.6 installed. When I try to select the 3.1.1 does not fix the error "Unable to find Application Server J2EE" Thanks in advance. Sorry if this question is in the wrong place, this is really not my area.

    Read the article

  • Editing true type fonts

    - by Parsa
    In typical Persian fonts which are True Type, there is a historical problem with yeh and kafs. These fonts are created for Windows 98, which didn't include full Persian support, and now, we have 2 kind of Kafs: Keheh(0x6a9, ?), and Arabic Kaf(0x643, ?), and 2 kind of Yehs: Farsi Yeh(0x6cc, ?), and Arabic Yeh(0x64a, ?). Old fonts use Arabic ones, but the standard keyboard for Persian uses the Persian ones of course. Is it possible to edit and fix these fonts? I've made many attempts to replace these characters with FontLab Studio, which I failed. Any suggestions?

    Read the article

  • upgrade glibc on RHEL4 without breaking anything

    - by SpliFF
    I have a static version of wkhtmltopdf which requires glibc-2.4 wkhtmltopdf: /lib/tls/libc.so.6: version `GLIBC_2.4' not found (required by wkhtmltopdf) I have apt installed with the DAG repos. Other than that the server is pretty stock standard except for Coldfusion MX7. My question is, is it safe to just "apt update glibc"? Will the updated glibc clobber the old one or will they co-exist? Should I "apt upgrade" the whole server? I'm pretty sure everything else (Apache2, Postgres8, etc) will handle the upgrade but Coldfusion concerns me due to its proprietry nature.

    Read the article

  • Chroot with CentOS 5.3 + openssh 4.3p2

    - by Scud
    OS: CentOS 5.3, with openssh 4.3p2 Trying to set 'chroot' in ssh shell, but openssh version prior to 4.8 doesn't take below settings. yum update openssh open up to version 4.3 which is quite old. Doesn't CentOS support openssh 4.8 or up? If that's the case, how to set chroot with openssh 4.3? or is it better to just using FTP? My purpose is limit SFTP or FTP access to certain folder, not root folder. Thanks! Match group sftponly ChrootDirectory /home/%u X11Forwarding no AllowTcpForwarding no ForceCommand internal-sftp

    Read the article

  • PHP pages working slow from time to time

    - by user1038179
    I have VPS with limit of 2GB of ram and 8 CPU cores. I have 5 sites on that VPS (one of them is just for testing, no visitors exept me). All 5 sites are image galleries, like wallpaper sites. Last week I noticed problem on one site (main domain, used for name servers, and also with most traffic, visitors). That site has two image galleries, one is old static html gallery made few years ago and another, main, is powered by ZENPhoto CMS. Also I have that same gallery CMS on another two sites on that same VPS (on one running site and on one just for testing site). On other two sites I have diferent PHP driven gallery. Problem is that after some time (it vary from 10 minutes to few hours after apache restart), loading of pages on main site becomes very slow, or I get 503 Service Temporarily Unavailable error. So pages becomes unavailable. But just that part with new CMS gallery, old part of site with static html pages are working fast and just fine. Also other two sites with same CMS gallery and other two with different PHP driven gallery are working fine and fast at the same time. I thought it must be something with CMS on that main site, because other sites are working nice. Then I tryed to open contact and guest book pages on that main site which are outside of that CMS but also PHP pages, and they do not load too, but that same contact php scipts are working on other sites at the same time. So, when site starts to hangs, ONLY PHP generated content is not working, like I said other static pages are working. And, ONLY on that one main site I have problems. Then I need to restart Apache, after restart everything is vorking nice and fast, for some time, than again, just PHP pages on main site are becomming slower. If I do not restart apache that slowness take some time (several minutes, hours, depending ot traffic) and during that time PHP diven content is loading very slow or unavailable on that site. After sime time, on moments everything start to work and is fast again for some time, and again. In hours with more traffic PHP content is loading slowly or it is unavailable, in hours with less traffic it is sometimes fast and sometimes little bit slower than usually. And ones again, only on that main site, and only PHP driven pages, static pages are working fast even in most traffic hours also other sites with even same CMS are working fast. Currently I have about 7000 unique visitors on that site but site worked nice even with 11500 visitors per day. And about 17000 in total visitors on VPS, all sites ( about 3 pages per unique visitor). When site start to slow down sometimes in apache status I can see something like this: mod_fcgid status: Total FastCGI processes: 37 Process: php5 (/usr/local/cpanel/cgi-sys/php5)Pid Active Idle Accesses State 11300 39 28 7 Working 11274 47 28 7 Working 11296 40 29 3 Working 11283 45 30 3 Working 11304 36 31 1 Working 11282 46 32 3 Working 11292 42 33 1 Working 11289 44 34 1 Working 11305 35 35 0 Working 11273 48 36 2 Working 11280 47 39 1 Working 10125 133 40 12 Exiting(communication error) 11294 41 41 1 Exiting(communication error) 11277 47 42 2 Exiting(communication error) 11291 43 43 1 Exiting(communication error) 10187 108 43 10 Exiting(communication error) 10209 95 44 7 Exiting(communication error) 10171 113 44 5 Exiting(communication error) 11275 47 47 1 Exiting(communication error) 10144 125 48 8 Exiting(communication error) 10086 149 48 20 Exiting(communication error) 10212 94 49 5 Exiting(communication error) 10158 118 49 5 Exiting(communication error) 10169 114 50 4 Exiting(communication error) 10105 141 50 16 Exiting(communication error) 10094 146 50 15 Exiting(communication error) 10115 139 51 17 Exiting(communication error) 10213 93 51 9 Exiting(communication error) 10197 103 51 7 Exiting(communication error) Process: php5 (/usr/local/cpanel/cgi-sys/php5)Pid Active Idle Accesses State 7983 1079 2 149 Ready 7979 1079 11 151 Ready Process: php5 (/usr/local/cpanel/cgi-sys/php5)Pid Active Idle Accesses State 7990 1066 0 57 Ready 8001 1031 64 35 Ready 7999 1032 94 29 Ready 8000 1031 91 36 Ready 8002 1029 34 52 Ready Process: php5 (/usr/local/cpanel/cgi-sys/php5)Pid Active Idle Accesses State 7991 1064 29 115 Ready When it is working nicly there is no lines with "Exiting(communication error)" Active and Idle are time active and time since last request, in seconds. Here are system info. Sysem info: Total processors: 8 Processor #1 Vendor GenuineIntel Name Intel(R) Xeon(R) CPU E5440 @ 2.83GHz Speed 88.320 MHz Cache 6144 KB All other seven are the same. System Information Linux vps.nnnnnnnnnnnnnnnnn.nnn 2.6.18-028stab099.3 #1 SMP Wed Mar 7 15:20:22 MSK 2012 x86_64 x86_64 x86_64 GNU/Linux Current Memory Usage total used free shared buffers cached Mem: 8388608 882164 7506444 0 0 0 -/+ buffers/cache: 882164 7506444 Swap: 0 0 0 Total: 8388608 882164 7506444 Current Disk Usage Filesystem Size Used Avail Use% Mounted on /dev/vzfs 100G 34G 67G 34% / none System Details: Running on: Apache/2.2.22 System info: (Unix) mod_ssl/2.2.22 OpenSSL/0.9.8e-fips-rhel5 DAV/2 mod_auth_passthrough/2.1 mod_bwlimited/1.4 FrontPage/5.0.2.2635 mod_fcgid/2.3.6 Powered by: PHP/5.3.10 Current Configuration Default PHP Version (.php files) 5 PHP 5 Handler fcgi PHP 4 Handler suphp Apache suEXEC on Apache Ruid2 off PHP 4 Handler suphp Apache suEXEC on Apache Configuration The following settings have been saved: fileetag: All keepalive: On keepalivetimeout: 3 maxclients: 150 maxkeepaliverequests: 10 maxrequestsperchild: 10000 maxspareservers: 10 minspareservers: 5 root_options: ExecCGI, FollowSymLinks, Includes, IncludesNOEXEC, Indexes, MultiViews, SymLinksIfOwnerMatch serverlimit: 256 serversignature: Off servertokens: Full sslciphersuite: ALL:!ADH:RC4+RSA:+HIGH:+MEDIUM:-LOW:-SSLv2:-EXP:!kEDH startservers: 5 timeout: 30 I hope, I explained my problem nicely. Any help would be nice.

    Read the article

  • Tokyo Tyrant ulog / update log management.

    - by Nathan Milford
    I'm testing Tokyo Tyrant in a master-master setup and have found the ulog grows out of control and locks up the disk. At first I found the -ulim option useful and limited the logfile size, however it simply rolls over to a new log, leaving the old ones to clutter up the partition. I suppose I'll write a shell script that will delete ulogs older than X, once I find out how far back Tokyo Tyrant needs in the update log in order to failover. Does anyone have any experience with this Tokyo Tyrant? Do you have a feel (acknowledging that every install is different based on what is being stored) for the optimal ulog size vs how far back a Tokyo Tyrant instance needs to look in the ulog to assume master status? Thanks, nathan

    Read the article

  • Windows 7 Machine Makes Router Drop -All- Wireless Connections

    - by Hammer Bro.
    Some background: My home network consists of my Desktop, a two-month old Windows 7 (x64) machine which is online most frequently (N-spec), as well as three other Windows XP laptops (all G) that only connect every now and then (one for work, one for Netflix, and the other for infrequent regular laptop uses). I used to have a Belkin F5D8236-4 wireless router, and everything worked great. A week ago, however, I found out that the Belkin absolutely in no way would establish a VPN connection, something that has become important for work. So I bought a Netgear WNR3500v2/U/L. The wireless was acting a little sketchy at first for just the Windows 7 machine, but I thought it had something to do with 802.11N and I was in a hurry so I just fished up an ethernet cable and disabled the computer's wireless. It has now become apparent, though, that whenever the Windows 7 machine is connected to the router, all wireless connections become unstable. I was using my work laptop for a solid six hours today with no trouble, having multiple SSH connections open over VPN and streaming internet radio in the background. Then, within two minutes of turning on this Windows 7 box, I had lost all connectivity over the wireless. And I was two feet away from the router. The same sort of thing happens on all of the other laptops -- Netflix can be playing stuff all weekend, but if I come up here and do things on this (W7) computer, the streaming will be dead within ten minutes. So here are my basic observations: If the Windows 7 machine is off, then all connections will have a Signal Strength of Very Good or Excellent and a Speed of 48-54 Mbps for an indefinite amount of time. Shortly after the Windows 7 machine is turned on, all wireless connections will experience a consistent decline in Speed down to 1.0 Mbps, eventually losing their connection entirely. These machines will continue to maintain 70% signal strength, as observed by themselves and router. Once dropped, a wireless connection will have difficulty reconnecting. And, if a connection manages to become established, it will quickly drop off again. The Windows 7 machine itself will continue to function just fine if it's using a wired connection, although it will experience these same issues over the wireless. All of the drivers and firmwares are up to date, and this happened both with the stock Netgear firmware as well as the (current) DD-WRT. What I've tried: Making sure each computer is being assigned a distinct IP. (They are.) Disabling UPnP and Stateful Packet Inspection on the router. Disabling Network Sharing, SSDP Discovery, TCP/IP NetBios Helper and Computer Browser services on the Windows 7 machine. Disabling QoS Packet Scheduler, IPv6, and Link Layer Topology Discovery options on my ethernet controller (leaving only Client for Microsoft Networks, File and Printer Sharing, and IPv4 enabled). What I think: It seems awfully similar to the problems discussed in detail at http://social.msdn.microsoft.com/Forums/en/wsk/thread/1064e397-9d9b-4ae2-bc8e-c8798e591915 (which was both the most relevant and concrete information I could dig up on the internet). I still think that something the Windows 7 IP stack (or just Operating System itself) is doing is giving the router fits. However, I could be wrong, because I have two key differences. One is that most instances of this problem are reported as the entire router dying or restarting, and mine still works just fine over the wired connection. The other is that it's a new router, tested with both the factory firmware and the (I assume) well-maintained DD-WRT project. Even if Windows 7 is still secretly sending IPv6 packets or the TCP Window Scaling implementation that I hear Vista caused some trouble with (even though I've tried my best to disable anything fancy), this router should support those functions. I don't want to get a new or a replacement router unless someone can convince me that this is a defective unit. But the problem seems too specific and predictable by my instincts to be a hardware hiccup. And I don't want to deal with the inevitable problems that always seem to take half a day to resolve when getting a new router, since I'm frantically working (including tomorrow) to complete a project by next week's deadline. Plus, I think in the worst case scenario, I could keep this router connected directly to the modem, disable its wireless entirely, and connect the old Belkin to it directly. That should allow me to still use VPN (although I'll have to plug my work laptop directly into that router), and then maintain wireless connections for all of the other computers. But that feels so wrong to me. Anyone have any ideas what the cause and possible solution could be? Clarifications: The Windows 7 machine is directly connected via an ethernet cable to the router for everything above. But while it is online, all other computers' wireless connections become unusable. It is not an issue of signal strength or interference -- no other devices within scanning range are using Channel 1, and the problem will affect computers that are literally feet away from the router with 95% signal strength.

    Read the article

  • modprobe amd-rng fails, No such device

    - by CrackerJack9
    When trying to install hw_random to a 2.6 kernel, modprobe returns a FATAL error "No such device" on both CentOS 5.7 and Fedora 15. Both are using the latest kernel, respectively. The .ko file exists, and config- contains CONFIG_RTC=y and CONFIG_CRYPTO_RNG=m Both servers are x86_64 AMD processors. The only google results are very old, often reference the kernel module 'hw_random' (which has been replaced with processor specific modules and don't offer much help. Has anyone been able to install hw_random? Am I missing a step while installing the module?

    Read the article

  • hosts file ignored, how to troubleshoot?

    - by Superbest
    The hosts file on Windows computers is used to bind certain name strings to specific IP addresses to override other name resolution methods. Often, one decides to change the hosts file, and discovers that the changes refuse to take effect, or that even old entries of the hosts file are ignored thereafter. A number of "gotcha" mistakes can cause this, and it can be frustrating to figure out which one. When faced with the problem of Windows ignoring a hosts file, what is a comprehensive troubleshoot protocol that may be followed? This question has duplicates on SO, such as hosts file seems to be ignored, HOSTS file being ignored, /etc/hosts file being ignored as well as numerous discussions elsewhere. However, these tend to deal with a specific case, and once whatever mistake the OP made is found out, the discussion is over. If you don't happen to have made the same error, such a discussion isn't very useful. So I thought it would be more helpful to have a general protocol for resolving all hosts-related issues that would cover all cases.

    Read the article

  • Restore using time machine from an macbook to an macbook pro (first intel)

    - by Anders Nørgaard
    Hello.. My girlfriend have Macbook 10.6.3, the first plastic version. the screen broke an its at service store now. In the mean time, i have tried to restore from hers TM backup to my old macbook pro 10.6.3 (the first intel version). Everything seems to work out fine, but when its finish, it says reboot, but nothing happens. When i hold down the power button, powering down, and starts again, its come up with the grey roll down screen "you need to restart your machine again" in different languages. I have tried the restore procedure over again 2 times, and every time it ends up like this... Anyone have a suggestion what to do ? Thanks - Anders.

    Read the article

  • Zantaz's EAS exchange archive product doesn't integrate with Outlook in Windows 7

    - by Chris Farmer
    I work at a place that uses Exchange with Outlook for mail, and they also use a product from Zantaz called "EAS" which does server-side archiving of old messages. One of the artifacts of this archival is that email attachments are missing from the archived messages when viewed in Outlook. EAS has a client tool that plugs into Outlook that enables easy retrieval of those archived messages and their attachments, but it doesn't seem to work when installed on Windows 7. I have no direct evidence of this, other than that it simply doesn't work on my Windows 7 machine, and some of our network support staff seem to corroborate this. The symptom is that Outlook seems to know nothing of the existence of this EAS app. The EAS app also has a system tray icon which is there and offers some minimal functionality, but the real goodness is the Outlook integration, which I sorely miss. So, my question is this: does anyone here know whether it's possible to coerce this EAS product into working correctly in Windows 7?

    Read the article

  • Cleanup pending installation

    - by harper
    I have an old PC with Windows 2000 that I want to reanimate. Each time I start the PC I see a dialog box "Windows Installer","Installation wird vorbereitet." (Preparing installation). I can cancel that installation and work with that PC. But I don't know what installation was pending. There is a more severe problem: I cannot install or uninstall any other software since I get this hanging dialog again. It lasts forever taking no CPU time. How can I cleanup the pending installations registry to make misexec usable again?

    Read the article

  • Canon MF3200 Printer Problems

    - by Derick K.
    I bought a Canon MF3200 and used it on an old Windows laptop. The laptop broke, and now I'm trying to setup the printer on a laptop with Windows 7. I downloaded the new driver, and Windows was able to install it and mark it "Ready to Go." But whenever I try to print, an error comes up and it doesn't print. I tried to troubleshoot, to no avail. What else can I do? Any ideas on what the error might be?

    Read the article

  • Changes to .htaccess ignored

    - by Bojan Kogoj
    I have a website on the server, containing .htaccess. For testing purposes I wanted to replace it with another .htaccess, but changes have been ignored. Even though I have replaced with new .htaccess or even deleted it from server root, website is still working, like I haven't done any changes. Basically new .htaccess is being ignored, it's like server cached it and doesn't care about the new one. Because of that a testing site won't work since old rewrite rules are still in place. All I know about server is that it's Linux. Is there any way to make server see the changes? I cannot restart server.

    Read the article

  • How to reinstall OEM Windows 98 SE?

    - by Sammy
    I'm trying to install Windows 98 SE on an old PC and it's not going well. I run into this problem. Searching for Boot Record from Floppy..OK Starting Windows 98... TOSHIBA Enhanced-IDE CD/DVD-ROM Device Driver (ATAPI) Version 2.24 (C)Copyright Toshiba Corp. 1995-1999. All rights reserved. Device Name : TOSCD001 Number of units : 1 MSCDEX Version 2.25 Copyright (C) MIcrosoft Corp. 1986-1995. All rights reserved. Drive Z: = Driver TOSCD001 unit 0 TOSHIBA MACHINE Invalid drive specification Path not found - C:\TOOLS\CDROMDRV.SYS Invalid drive specification Invalid drive specification After that last line, it leaves me at a bitmap image displaying instructions to reboot with Ctrl+Alt+Del. It doesn't say why I have to reboot, and it doesn't state any error type, it just want's me to reboot for no apparent reason. After reboot, it just boots up from Floppy again and it cycles through the same thing all over again. The computer has been restored to original specification. Original system recovery "CD-ROM" discs are available and they are not scratched or anything, they are in very good condition. It's a set of 3 CDs, and the first disc labeled "1/3" should be the one holding the OEM version of Windows 98 SE. There is also a boot disk for Windows 98. I'm not sure what the other two discs are for. This computer came with three language support, so those could be holding different language versions or additional OEM discs. But I'm quite sure that the first disc holds the main operating system. BIOS has been set to optimized defaults. Boot priority is as follows; Floppy, IDE-0, CD-ROM. Under Standard CMOS settings, BIOS scans and autoconfigures both the hard drive and the CD/DVD drive. On POST it finds them both, and it finds the DOS bootdisk and starts preparing for installation, as you can see above. So what's this "invalid drive specification" about? Why isn't the installation starting? Updates Update 1 Booting from CD disc 2 In desperation I tried booting from the second CD. Boot order was; Floppy, CD-ROM, IDE-0. It boots normally from floppy disk, just like above, but then returns following. File not found - Z:\3LNGINST\TOOLS\PARTINFO.TXT I accidentally pressed some key on the keyboard, and before I knew it, the following screen showed up. Create Primary DOS Partition Current fixed disk drive: 1 Verifying drive integrity, 16% complete. After completion another screen showed up. Create Primary DOS Partition Current fixed disk drive: 1 Do you wish to use the maximum available size for a Primary DOS Partition and make the partition active (Y/N)?....................? [Y] Verifying drive integrity, 7% complete. I didn't choose Yes, it was set automatically. After completion the computer was automatically rebooted. Then I got a new screen. This is in Norwegian/Swedish/Finnish. Here's the message in Swedish. Hårddisken är inte klar för återställning av programvara. Installationsprogrammet måste skapa nya partitioner (C:, D:, ...). VARNING! ALLT INNEHÅLL PÅ HÅRDDISKEN KOMMER ATT RADERAS! Tryck på en tangent om du vill fortsätta (eller CTRL-C för att avbryta). Let me translate that. Hard drive is not ready for restoring the software. Setup program has to create new partitions (C:, D:, ...). WARNING! ALL CONTENTS ON THE HARD DRIVE WILL BE ERASED! Press any key to continue (or CTRL-C to cancel). I pressed Enter and it started formatting the hard drive. WARNING, ALL DATA ON NON-REMOVABLE DISK DRIVE c: WILL BE LOST! Proceed with Format (Y/N)?y Formatting 14,67.53M 1 percent completed. It automatically sets the "y" option and starts formatting. Rebooting with CD disc 1 After completing this operation it rebooted automatically. I inserted CD disc 1 and there was no issue with "invalid drive specification" anymore. Instead, a bitmap menu was displayed where it asked me to choose a language. And I thought I had it there for a while but it didn't work out. After choosing the language, another menu was displayed asking me to choose a type of recovery (restore pre-installed software OR restore hard drive partitions and pre-installed software). I opted for the second option. Then a data destruction warning showed up where I just pressed 1 to Continue. It did something and then just rebooted and the same formatting screen shows up as before. So something is not right. Am I doing it wrong? I seem to have come past the CD-ROM driver issue at least. But now I'm stuck with this problem... it seems to have something to do with the hard drive. Like... why is is it always trying to format it? Isn't it enough to format it once? By the way, it needs to be formatted as FAT32, right? Windows 98 doesn't support NTFS? I think FDISK should have taken care of this already. I know this is an old hard drive, but I connected to my main computer and it was able to read and write to it without a problem. It does have bad sectors though, but it's expected on an old hard drive like this. Any ideas?.. Update 2 I seem to be repeatedly getting stuck at the format screen where it asks to press any key to continue. So tried to cancel it this time with Ctrl+C. This leaves me at: A:\TOOLS> I can do DIR and CD and I tried to change to Z: drive. I tried running "setup" but there is no such thing. Z:\>setup Bad command or file name Update 3 Floppy structure Here's the file/folder structure of the floppy disk. A:\>dir /s Volume in drive A has no label. Volume Serial Number is 1700-1069 Directory of A:\ 1999-10-11 10:44 <DIR> BMP 1998-05-11 22:01 93 880 COMMAND.COM 1999-10-11 10:44 <DIR> factory 1999-10-11 10:44 <DIR> lang 1999-10-11 10:44 <DIR> TOOLS 2000-05-19 15:32 339 CONFIG.SYS 1999-10-26 13:38 0 BOOTLOG.TXT 2000-06-08 08:32 3 691 AUTOEXEC.BAT 4 File(s) 97 910 bytes Directory of A:\BMP 1999-10-11 10:44 <DIR> . 1999-10-11 10:44 <DIR> .. 0 File(s) 0 bytes Directory of A:\factory 1999-10-11 10:44 <DIR> . 1999-10-11 10:44 <DIR> .. 2000-06-08 13:09 2 662 3LNGINSF.BAT 1 File(s) 2 662 bytes Directory of A:\lang 1999-10-11 10:44 <DIR> . 1999-10-11 10:44 <DIR> .. 1998-11-24 08:02 49 575 FORMAT.COM 1998-11-24 08:02 63 900 FDISK.EXE 2 File(s) 113 475 bytes Directory of A:\TOOLS 1999-10-11 10:44 <DIR> . 1999-10-11 10:44 <DIR> .. 1998-05-06 22:01 49 575 FORMAT.COM 1995-10-27 20:29 28 164 BMPVIEW.EXE 1999-01-26 15:54 15 MAKEPA32.TXT 1998-05-06 22:01 3 878 XCOPY.EXE 1998-05-06 22:01 41 472 XCOPY32.MOD 1998-05-06 22:01 33 191 HIMEM.SYS 1998-05-06 22:01 125 495 EMM386.EXE 1998-05-06 22:01 18 967 SYS.COM 1996-01-31 21:55 18 CLK.COM 1994-04-02 08:20 22 HARDBOOT.COM 1999-02-03 15:46 15 MAKEPA16.TXT 1999-04-14 16:36 7 840 PARTFO32.EXE 2000-05-19 15:01 1 169 PARTFORM.BAT 1996-10-02 01:47 1 642 MBRCLR.COM 1999-07-01 11:58 8 175 BIOSCHKN.EXE 1998-06-23 08:55 5 904 PAR-TYPE.EXE 1998-11-24 08:02 29 271 MODE.COM 1998-11-24 08:02 15 252 ATTRIB.EXE 1998-11-24 08:02 19 083 DELTREE.EXE 1999-04-21 15:01 23 304 NTBB.EXE 1997-05-07 14:19 1 SYS.TXT 1999-07-01 12:23 61 566 F3DCHK.EXE 1998-05-11 20:01 34 566 KEYBOARD.SYS 1998-05-11 20:01 19 927 KEYB.COM 1999-10-26 14:31 910 partinfo.txt 1998-06-16 15:58 5 936 CHKDRVAC.EXE 1998-05-06 22:01 63 900 FDISK.EXE 1998-05-06 22:01 45 379 SMARTDRV.EXE 1992-12-03 19:48 10 695 SCISET.EXE 1997-06-25 15:49 6 YENT 1998-05-06 22:01 25 473 MSCDEX.EXE 1998-05-06 22:01 5 239 CHOICE.COM 1997-07-18 17:41 6 876 MBR.COM 1997-07-01 15:01 6 545 CHK2GB.COM 1998-06-10 20:04 8 128 PARTFORM.EXE 1990-01-04 02:09 19 MAKEPAR2.TXT 1990-01-04 01:00 27 MAKEPAR3.TXT 1990-01-04 01:00 27 MAKEPAR4.TXT 1998-02-13 13:47 15 MAKEPART.TXT 1999-04-14 13:47 5 200 DISKSIZE.EXE 1999-05-06 14:56 7 856 PARTFO16.EXE 1999-01-13 11:13 13 720 CDROMDRV.SYS 42 File(s) 734 463 bytes Total Files Listed: 49 File(s) 948 510 bytes 12 Dir(s) 268 800 bytes free A:\> CONFIG.SYS contents Here's the content of CONFIG.SYS. DEVICE=A:\TOOLS\HIMEM.SYS /TESTMEM:OFF REM I=B000-B7ff for Desktop BIOSes rem DEVICE=A:\TOOLS\EMM386.EXE NOEMS I=B000-B7ff x=C000-D000 DEVICE=A:\TOOLS\EMM386.EXE NOEMS x=C000-D000 DEVICE=A:\TOOLS\CDROMDRV.SYS /D:TOSCD001 BUFFERS=10 FILES=69 DOS=HIGH,UMB STACKS=9,256 LASTDRIVE=Z SWITCHES=/F SHELL=A:\COMMAND.COM /P /E:2048 AUTOEXEC.BAT contents :BEGIN @ECHO OFF PATH=A:\;A:\TOOLS; MSCDEX /D:TOSCD001 /L:Z /M:10 smartdrv 1024 128 SET TOOLS=A:\TOOLS SET COMSPEC=A:\COMMAND.COM SET EXITDRIVE=C: SET EXITPATH=\ CALL Z:\SETENV.BAT > NUL :TOSHCHK BIOSChkN IF NOT ERRORLEVEL 1 goto C_ACCESS BMPVIEW Z:\3LNGINST\BMP\NO_TOSP3.bmp /X=120 /Y=80 PAUSE > NUL SET EXITDRIVE=A: GOTO END :C_ACCESS CALL PARTFORM.BAT :C_EMPTY IF EXIST C:\*.* GOTO C_NOTEMPTY call z:\setenv.bat>nul goto PREPDU :C_NOTEMPTY REM ------------------MENU------------------------ :STARTMENU CLS BMPVIEW Z:\3LNGINST\BMP\LANGSELC.BMP /X=120 /Y=120 CLK CHOICE /C:123 /N >NUL REM L is the language that is selected IF ERRORLEVEL 1 SET L=%LNG1% IF ERRORLEVEL 2 SET L=%LNG2% IF ERRORLEVEL 3 SET L=%LNG3% SET BMP=BMP%L% BMPVIEW Z:\3LNGINST\%bmp%\HDDMENU.BMP /X=72 /Y=82 CLK CHOICE /C:129F /N > NUL IF ERRORLEVEL 4 GOTO FACTORY_MENU IF ERRORLEVEL 3 GOTO EXIT_MENU IF ERRORLEVEL 2 GOTO PARTFORM_MENU IF ERRORLEVEL 1 GOTO FORMAT_MENU GOTO END :FACTORY_MENU BMPVIEW Z:\3LNGINST\%bmp%\qformat.bmp /X=120 /Y=140 CLK choice /c:12 /N >nul IF ERRORLEVEL 2 GOTO STARTMENU IF ERRORLEVEL 1 GOTO FORMATF GOTO END :EXIT_MENU BMPVIEW Z:\3LNGINST\%bmp%\9.bmp /XC /X=96 /Y=267 choice /C:1pause /T:1,01 >nul SET EXITDRIVE=A: SET EXITPATH=\lang cls mode mono rem keyb xx>nul cls GOTO END :PARTFORM_MENU BMPVIEW Z:\3LNGINST\%bmp%\2.bmp /XC /X=96 /Y=216 choice /C:1pause /T:1,01 >nul BMPVIEW Z:\3LNGINST\%bmp%\partform.bmp /X=120 /Y=140 CLK choice /c:12 /N >nul IF ERRORLEVEL 2 GOTO STARTMENU IF ERRORLEVEL 1 GOTO PART_FORM SET EXITDRIVE=A: GOTO END :FORMAT_MENU BMPVIEW Z:\3LNGINST\%bmp%\1.bmp /XC /X=96 /Y=165 choice /C:1pause /T:1,01 >nul BMPVIEW Z:\3LNGINST\%bmp%\qformat.bmp /X=120 /Y=140 CLK choice /c:12 /N >nul IF ERRORLEVEL 2 GOTO STARTMENU IF ERRORLEVEL 1 GOTO FORMAT SET EXITDRIVE=A: GOTO END REM ------------------ MENU END ------------------------ :FORMAT bmpview Z:\3LNGINST\%bmp%\1.bmp /XC /X=145 /Y=235 choice /C:1pause /T:1,01 >nul CLS IF (%QFORMAT%)==(NO) GOTO FULLFO FORMAT C: /Q /V:"" <A:\TOOLS\YENT >NUL call z:\setenv.bat>nul goto PREPDU :FULLFO FORMAT C: /V:"" <A:\TOOLS\YENT call z:\setenv.bat>nul goto PREPDU :FORMATF CLS IF (%QFORMAT%)==(NO) GOTO FULLFO_F FORMAT C: /Q /V:"" <A:\TOOLS\YENT >NUL call z:\setenv.bat>nul goto PREPDU_F :FULLFO_F FORMAT C: /V:"" <A:\TOOLS\YENT call z:\setenv.bat>nul goto PREPDU_F :PART_FORM bmpview Z:\3LNGINST\bmp\1.bmp /XC /X=145 /Y=235 choice /C:1pause /T:1,01 >nul MBR /! HARDBOOT REM ====================== Triple Select ====================== :PREPDU XCOPY z:\3LNGINST\*.* C:\*.* /E /S /V >NUL ATTRIB -H -R -S C:\TOOLS\CDROMDRV.SYS COPY A:\TOOLS\CDROMDRV.SYS C:\TOOLS /Y SYS C: >NUL goto REBOOT :PREPDU_F copy A:\TOOLS\SMARTDRV.EXE C:\ /Y ATTRIB -H -R -S C:\SMARTDRV.EXE copy A:\FACTORY\3LNGINSF.bat c:\ c:\3LNGINSF.bat cls REM ====================== Dual Select END ====================== REM --------------- END ------------------ :REBOOT SMARTDRV.EXE /C bmpview Z:\3LNGINST\BMP\reboot3.bmp /X=120 /Y=140 :FOREVER pause >nul goto FOREVER :END SMARTDRV.EXE /C %EXITDRIVE% cd %EXITPATH% echo on CD structure S:\>dir /s Volume in drive S is T3ELK4SC Volume Serial Number is 2042-5BC9 Directory of S:\ 2000-08-22 14:14 <DIR> 3LNGINSF 2000-08-22 14:14 <DIR> 3LNGINST 2000-06-15 15:57 <DIR> CRC 2000-06-15 12:04 387 667 767 T310C1NO.W98 2000-09-07 15:36 273 setenv.BAT 2 File(s) 387 668 040 bytes Directory of S:\3LNGINSF 1601-01-01 02:00 <DIR> . 1601-01-01 02:00 <DIR> .. 1999-10-27 10:51 1 806 AUTOEXEC.BAT 2000-08-22 14:14 <DIR> BMP 2000-05-19 15:29 265 CONFIG.SYS 2000-08-22 14:14 <DIR> POSTINST 2000-08-22 14:14 <DIR> TOOLS 2000-08-22 14:14 <DIR> WIN98SYS 2 File(s) 2 071 bytes Directory of S:\3LNGINSF\BMP 1601-01-01 02:00 <DIR> . 1601-01-01 02:00 <DIR> .. 1997-04-22 09:43 718 1.BMP 1997-04-22 09:44 718 2.BMP 1999-01-04 02:38 718 3.BMP 2000-07-05 11:22 60 118 Cdchg2.bmp 2000-07-05 11:22 60 118 Cdchg3.bmp 2000-07-05 13:37 60 118 Fin.bmp 2000-07-06 14:18 120 118 Menu.bmp 2000-07-05 13:34 60 118 Nor.bmp 2000-07-05 11:53 35 318 Progress.bmp 2000-07-05 13:40 60 118 Swe.bmp 2000-07-05 12:09 84 118 Wrongcd2.bmp 2000-07-05 12:09 84 118 Wrongcd3.bmp 12 File(s) 626 416 bytes Directory of S:\3LNGINSF\POSTINST 1601-01-01 02:00 <DIR> . 1601-01-01 02:00 <DIR> .. 2000-05-19 09:15 33 POSTINST.BAT 1 File(s) 33 bytes Directory of S:\3LNGINSF\TOOLS 1601-01-01 02:00 <DIR> . 1601-01-01 02:00 <DIR> .. 2000-07-06 14:49 3 593 3LNGINST.BAT 1998-11-24 08:02 15 252 ATTRIB.EXE 1995-10-27 18:29 28 164 BMPVIEW.EXE 1999-01-13 11:13 13 720 CDROMDRV.SYS 1998-05-06 20:01 5 239 CHOICE.COM 1996-01-31 19:55 18 CLK.COM 1998-11-24 08:02 19 083 DELTREE.EXE 1998-05-06 20:01 125 495 EMM386.EXE 1999-07-01 12:23 61 566 F3DCHK.EXE 1998-05-06 20:01 49 575 FORMAT.COM 1994-04-02 06:20 22 HARDBOOT.COM 1998-05-06 20:01 33 191 HIMEM.SYS 1998-05-06 20:01 25 473 MSCDEX.EXE 1998-05-06 20:01 12 663 RAMDRIVE.SYS 1998-05-06 20:01 45 379 SMARTDRV.EXE 1997-05-07 14:19 1 SYS.TXT 1995-09-27 14:25 6 813 VOLCHECK.EXE 1998-05-06 20:01 3 878 XCOPY.EXE 1998-05-06 20:01 41 472 XCOPY32.MOD 1997-06-25 13:49 6 YENT 20 File(s) 490 603 bytes Directory of S:\3LNGINSF\WIN98SYS 1601-01-01 02:00 <DIR> . 1601-01-01 02:00 <DIR> .. 1998-12-04 20:00 222 390 IO.SYS 1998-05-06 20:01 18 967 SYS.COM 1998-05-06 20:01 93 880 command.com 3 File(s) 335 237 bytes Directory of S:\3LNGINST 1601-01-01 02:00 <DIR> . 1601-01-01 02:00 <DIR> .. 1999-05-31 09:51 1 576 AUTOEXEC.BAT 2000-08-22 14:14 <DIR> BMP 2000-08-22 14:14 <DIR> Bmpfin 2000-08-22 14:14 <DIR> Bmpnor 2000-08-22 14:14 <DIR> Bmpswe 2000-05-19 15:30 265 CONFIG.SYS 2000-08-22 14:14 <DIR> POSTINST 2000-08-22 14:14 <DIR> TOOLS 2000-08-22 14:14 <DIR> WIN98SYS 2 File(s) 1 841 bytes Directory of S:\3LNGINST\BMP 1601-01-01 02:00 <DIR> . 1601-01-01 02:00 <DIR> .. 1997-04-22 09:43 718 1.BMP 1997-04-22 09:44 718 2.BMP 1999-01-04 02:38 718 3.BMP 2000-07-05 11:22 60 118 Cdchg2.bmp 2000-07-05 11:22 60 118 Cdchg3.bmp 2000-07-05 13:37 60 118 Fin.bmp 2000-07-06 14:18 120 118 Menu.bmp 2000-07-05 13:34 60 118 Nor.bmp 2000-07-05 11:53 35 318 Progress.bmp 2000-07-06 14:08 40 518 Reboot3.bmp 2000-07-05 13:40 60 118 Swe.bmp 2000-07-05 12:09 84 118 Wrongcd2.bmp 2000-07-05 12:09 84 118 Wrongcd3.bmp 2000-07-05 13:52 48 118 langselc.bmp 2000-07-05 11:47 57 318 no_tosp3.bmp 15 File(s) 772 370 bytes Directory of S:\3LNGINST\Bmpfin 1601-01-01 02:00 <DIR> . 1601-01-01 02:00 <DIR> .. 1997-04-22 09:43 718 1.BMP 1997-04-22 09:44 718 2.BMP 1998-06-13 00:07 718 9.bmp 2000-03-08 15:02 78 486 Hddmenu.bmp 2000-03-08 15:31 25 318 No_tospc.bmp 2000-03-08 15:37 36 518 PARTFORM.BMP 2000-03-08 15:42 36 518 Qformat.bmp 7 File(s) 178 994 bytes Directory of S:\3LNGINST\Bmpnor 1601-01-01 02:00 <DIR> . 1601-01-01 02:00 <DIR> .. 1997-04-22 09:43 718 1.BMP 1997-04-22 09:44 718 2.BMP 1998-06-13 00:07 718 9.bmp 1999-05-05 13:26 78 486 Hddmenu.bmp 1998-07-13 11:36 25 318 No_tospc.bmp 1998-07-13 11:41 36 518 PARTFORM.BMP 1998-07-13 11:45 36 518 Qformat.bmp 7 File(s) 178 994 bytes Directory of S:\3LNGINST\Bmpswe 1601-01-01 02:00 <DIR> . 1601-01-01 02:00 <DIR> .. 1997-04-22 09:43 718 1.BMP 1997-04-22 09:44 718 2.BMP 1998-06-13 00:07 718 9.bmp 1999-05-06 08:14 78 486 Hddmenu.bmp 1998-07-10 16:25 25 318 No_tospc.bmp 1998-07-10 16:29 36 518 PARTFORM.BMP 1998-07-10 17:08 36 518 Qformat.bmp 7 File(s) 178 994 bytes Directory of S:\3LNGINST\POSTINST 1601-01-01 02:00 <DIR> . 1601-01-01 02:00 <DIR> .. 2000-05-19 09:15 33 POSTINST.BAT 1 File(s) 33 bytes Directory of S:\3LNGINST\TOOLS 1601-01-01 02:00 <DIR> . 1601-01-01 02:00 <DIR> .. 2000-05-19 14:52 3 898 3LNGINST.BAT 1995-10-27 18:29 28 164 BMPVIEW.EXE 1999-01-13 11:13 13 720 CDROMDRV.SYS 1998-05-06 20:01 5 239 CHOICE.COM 1996-01-31 19:55 18 CLK.COM 1998-05-06 20:01 125 495 EMM386.EXE 1999-07-01 12:23 61 566 F3DCHK.EXE 1998-05-06 20:01 49 575 FORMAT.COM 1994-04-02 06:20 22 HARDBOOT.COM 1998-05-06 20:01 33 191 HIMEM.SYS 1998-05-06 20:01 25 473 MSCDEX.EXE 2000-07-06 14:41 910 PARTINFO.TXT 1998-05-06 20:01 12 663 RAMDRIVE.SYS 1998-05-06 20:01 45 379 SMARTDRV.EXE 1997-05-07 14:19 1 SYS.TXT 1995-09-27 14:25 6 813 VOLCHECK.EXE 1998-05-06 20:01 3 878 XCOPY.EXE 1998-05-06 20:01 41 472 XCOPY32.MOD 1997-06-25 13:49 6 YENT 19 File(s) 457 483 bytes Directory of S:\3LNGINST\WIN98SYS 1601-01-01 02:00 <DIR> . 1601-01-01 02:00 <DIR> .. 1998-12-04 20:00 222 390 IO.SYS 1998-05-06 20:01 18 967 SYS.COM 1998-05-06 20:01 93 880 command.com 3 File(s) 335 237 bytes Directory of S:\CRC 1601-01-01 02:00 <DIR> . 1601-01-01 02:00 <DIR> .. 2000-06-15 12:07 181 422 T310C1NO.ALL 2000-06-15 12:09 215 427 T310C1NO.CRC 2000-06-15 12:07 2 157 T310C1NO.HID 3 File(s) 399 006 bytes Total Files Listed: 104 File(s) 391 625 352 bytes 42 Dir(s) 0 bytes free S:\> Now which line or lines need to be changed? Do I really have to change drive letter Z: to C:? Proposed solutions Solution #1 Ramhound proposed to change the boot order to following; CD-ROM, IDE-0, Floppy This didn't help. In fact, here is the result of it. Searching for Boot Record from CDROM..Not Found Searching for Boot Record from IDE-0.. OK Missing operating system Any other ideas?... Solution #2 Rik proposed to run Z:\setup. Now that I have found a way to drop to DOS prompt with Ctrl+C as described above (Update 2), I did try running setup but there is no such command or file in there. So that didn't work.

    Read the article

  • Log Location Url Responses of 301 redirects from IIS

    - by James Lawruk
    Is there a way to log 301 redirects returned by IIS with the (1) request Url and the (2) location Url of the response? Something like this: Url, Location /about-us, /about /old-page, /new-page The IIS logs contain the Request Url and the status code (301), but not the location Url of the response. Ideally there would be an additional field in the IIS Log called Location that would be populated when IIS responded with a 301. In my case the source of the redirect could be ISAPI Rewrite Rules, ASP.NET applications, Cold Fusion applications, or IIS itself. Perhaps there is a way to log IIS response data? Thanks for your help.

    Read the article

  • Online remount btrfs of root filesystem with different subvolume (snapshot) [migrated]

    - by goncalopp
    Let's say you have a btrfs root filesystem on an online system. You want to revert the filesystem to an earlier state, of which you have a snapshot: remount /dev/sdaX / -o remount,subvol=snapshots/Y For the record, I've done this in a test system, and it does not work. The command returns with no errors, but the subvolume mounted is the same. If this did work, what would be the consequences? My guess is that open file descriptors would still point to the old subvolume, thus possibly leading to "data loss" on the new subvolume, if one was not careful. Assuming one goes to the trouble of closing and reopening all open file descriptors, does this sound feasible? Or are there other types of problems?

    Read the article

  • Win7 glass-like Aero feature - unable to enable

    - by user24752
    I have a 4 months old PC with Win7 Home Premium x64. Windows Experience Index is 5.4. Intel i5 processor 6GB memory nVidia GT220 video card. During games, Windows reported shortage of system resources, so switched the desktop back to "Windows 7 Basic" desktop theme. After game-over, I could switch back to the normal theme and enjoy all Aero eye-candies. However, lately the glass-like window transparency feature got disabled, and I found no ways to enable it again. There is a Troubleshouting option in Control Panel saying: "Find and fix problems with transparency and other visual effects". If I launch that, it does not find anything. Event viewer is full with the following warnings: The Desktop Window Manager is experiencing heavy resource contention. Scenario : The Desktop Window Manager responsiveness has degraded. Taskbar, window borders, etc, none of the other transparent features work, and I cannot turn them on. Any thoughts?

    Read the article

  • CentOS Backup BASH Script

    - by user1062058
    I just wrote this script for backing up everything into a tar.gz file. Does it look okay? How can I get the tar file to transfer itself over to another server after executing? FTP from itself? I'm going to put this script into a weekly cron. #!/bin/bash rm ~/backup.tar.gz #removes old backup BACKUP_DIRS=$HOME #$HOME is builtin, it goes to /home/ and all child dirs tar -cvzf backup.tar.gz $BACKUP_DIRS # run tar -zxvf to extract backup.tar.gz Thanks.

    Read the article

  • Deactivate dead OCS 2007 R2 Edge Server?

    - by slashp
    I'm having a surprising issue where our old OCS 2007 R2 Edge server died of hardware failure (no backup) in the middle of our move to Lync. How can I forcefully remove the Edge server from the organization without being able to deactivate the role from the server itself? I've noticed the correct procedure for uninstalling OCS 2007 R2 is as follows: If you are removing an Edge Server, a Mediation Server, an Archiving Server, or a Monitoring Server, remove the Office Communications Server 2007 R2 components in the following sequence: Microsoft Office Communications Server 2007 R2 Edge Server Microsoft Office Communications Server 2007 R2 Mediation Server Microsoft Office Communications Server 2007 R2 Archiving Server Microsoft Office Communications Server 2007 R2 Monitoring Server Microsoft Office Communications Server 2007 R2 Core Components Microsoft Office Communications Server 2007 R2 Unified Communications Managed API 2.0 Core Redistribution package And to deactivate an Edge server: http://technet.microsoft.com/en-us/library/dd572832(v=office.13).aspx Any advice would be greatly appreciated.

    Read the article

  • Find the source of malware?

    - by Jud Stephenson
    I have a server that was running an older version of lighttpd (1.4.19 on a freebsd 6.2-RELEASE (yea, old) machine) and google alerted me that it had found malware embedded on one of my server's pages. It just so happened to be our index page. I promptly removed the malware and started looking at server logs for how it got there. With no trace in any of the logs of the files being edited, I noticed that the index page's owner had been changed to www, which is the lighttpd user. I then concluded that some sort of veunerability must have existed for that software version and promptly upgraded to 1.4.26. Now the malware is back. I have started some pretty verbose server logging with ftp, lighttpd, and all login attempts to try and see how this script is getting in. Are their any suggestions as to other approaches to take?

    Read the article

  • How safe is it to run CHKDSK on an SSD?

    - by Eilon
    I recently saw Windows 7 pop up a warning or two that I should run chkdsk on my laptop. My laptop came with an SSD and I'm not sure if there are any negative implications to running chkdsk on such a drive. Are there any potential issues with reporting "bad sectors" on the drive? I would imagine that the physical concept of sectors is completely different between a platter and a microchip. I don't think my SSD supports TRIM. It's about 14 months old and a quick web search seems to hint that it doesn't (though it's nearly impossible to find out this info for sure!). I'm also not sure if TRIM is even relevant here since there shouldn't be much in the way of deletes. So, how safe is it to run chkdsk on my SSD drive? The model of SSD that I have is reported as "Samsung SSD PB22-JS3 2.5".

    Read the article

  • Windows performance monitor new instances

    - by fborozan
    Hi all, I am trying to configure performance monitor on 2003/2008R1&R2 to capture new instances of the counters without any luck. For example if I select counter Process\%Processor time (to monitor processor time per any instances of the process) everything works fine until I open or close any application. If in the meanwhile new application is open it will not be included in the monitoring processor, and old application instance will display zero for % processor time. The problem is performance monitor is not refreshing instances of the new applications/users/new terminal session/ or any other metrics that changes instances in the meanwhile. The solution is to stop/start log file, but I don't want to do that every sec and the logging will be split into two files. Anybody knows how do I accomplish to add all new instances? Any help greatly appreciated

    Read the article

< Previous Page | 205 206 207 208 209 210 211 212 213 214 215 216  | Next Page >