Search Results

Search found 1440 results on 58 pages for 'adam z'.

Page 21/58 | < Previous Page | 17 18 19 20 21 22 23 24 25 26 27 28  | Next Page >

• Mount drive at /Volumes/NAME/ or similar in Cygwin

  - by Adam

  Hi.. I'm using Cygwin on Windows 7. When I plug in an USB stick, the drive automatically gets mounted to /cygdrive/x . This is good and really easy to use. My problem is that the drive letter changes sometimes, and when I've got remotes set up in git - I've got one called usb at /cygdrive/h/ - this sometimes doesn't work and I have to change the remote URL. That's just an example, there are other scenarios where I wouldn't want it to change. I like what the Mac does, and puts mounts a volume at /Volumes/STICK (STICK is the Volume name of my usb stick). Is there any way I can do this, or something similar under Cygwin. Thanks

  Read the article

• How to recover data from Dell dimension 9150 RAID 0 on another system?

  - by Adam

  I have a Dell Dimension 9150 which has failed. I'm trying to recover the data. It had two SATA 250GB drives in RAID 0 configuration. I'm trying to use a shuttle PC running Windows7 to recover the data from the drives which contained an XP boot volume. I just want the data, it doesn't have to boot. What program would I need to rebuild / interrogate the drives (one of them is failing the onboard hardware test)? What drivers would I need to install? Windows7 sees the drive as one partition but doesn't see volume information. Ubuntu can see the drive as one partition and also can tell what the drive is called, but can't access the data Any help appreciated!! :)

  Read the article

• Is there a way to set the Powerpoint Slide Sorter Zoom above 100%?

  - by Adam Wuerl

  In the PowerPoint slider sorter view, is there a way to set the zoom level larger than 100%? On PowerPoint for Mac this slider goes to much higher values, essentially allowing zoom all the way in to a single slide, but on the Windows version (depending on screen resolution and slide dimensions) the maximum zoom is often several slides wide. Evidently it's possible to achieve a similar affect by changing the page size, but is there some sort of preferences hack that will change the maximum value of this slider?

  Read the article

• SSL on app - nginx web server

  - by Adam

  I am running an nginx web server where I redirect all http requests to https (with a self signed cert). Here is how I REDIRECT all http requests to https in the nginx config file: server { listen 80 default_server; listen [::]:80 default_server ipv6only=on; server_name my.server.ip; return 301 https://$server_name$request_uri; Problem is - I cannot seem to do so for an app running on a port. Example: http://my.server.ip:1234 does not redirect to https://my.server.ip:1234 ir works fine on all other urls like http://my.server.ip/temp etc. How can I modify the nginx config file to force that app url through ssl?

  Read the article

• Fun projects to do with an old 17" LCD Monitor

  - by Adam Haile

  I've got an old 17" LCD that I've had for nearly 9 years now but still works pretty well. It's been my secondary monitor for a few years, but I just got a new 24" monitor, so my current main LCD (19") will become the new secondary screen. Any good suggestions of interesting (and preferably cheap/free) hacks, etc. I could do with this old monitor? I don't want to just throw it out. For example, is there an easy way to turn it into a touch screen or something? I'm open to suggestions

  Read the article

• very Slow machine when searching the network

  - by Adam

  Hi We are using a Dell desktop machine with 2 GB RRAM & Pentium D 3.00 GHz. The machine is very slow when using our Sales program and searching over the local network. We have this problem on 2 machine which are the same spec - This one and another. All of our other machine (10) run fast with no issues. Our server is SBS 2008 and AV is AVG. All of our client machines are WinXp Pro SP3 using the latest drivers. Any ideas?

  Read the article

• mysqldump and wamp

  - by Adam

  I am running a wamp server and trying to use mysqldump to backup a mysql database I have. The following is the PHP code I am using to run mysqldump. exec("mysqldump backup -u$user -p$pass > $sql_file"); When I run the script the page just loads inifnately and the backup is not created. A blank file is being created so I know something is happening. Extra info: exec() is not disabled PHP is not running in safe mode Any ideas?? Win XP, WAMP, MYSQL 5.0.51b

  Read the article

• Relevance and Necessity of SNMP

  - by Adam Tannon

  Edit: I am in the process of designing a Java-based monitoring tool that will send back periodic "health checks" of a Java app deployed to a cluster of GlassFish servers. I am trying to figure out the best protocol for this monitoring tool to send information back to the monitoring server on. After an initial research effort on my part, it seems like SNMP is just a protocol for monitor-type applications to communicate the "health status" of something (a part of a network, a server, a cluster, an application, etc.) to the rest of the network. If the above is incorrect, please correct me!!! Assuming the generalization is more or less accurate, my next question is: why is this a protocol!?!? In the age of REST/SOAP/TCP protocols, why is there the need for a standardized protocol that only fits one type of application (monitoring)? In other words, if I'm a developer assigned to building a new monitoring tool that periodically polls a server and reports on its CPU and available memory, what advantages does SNMP give me over just POSTing to a RESTful API via plain 'ole HTTP? I'm sure I'm missing something here - I just need someone to help connect the dots! Thanks in advance!

  Read the article

• copy list of video file names to text file along with their runtime?

  - by Adam Johnston

  Copy list of file names to text file? I am linking the above page because of its relevance to my question. Is there anything similar that can be done to output a 'plain' looking text file (or xml or csv file) with basically the same data that the following cmd prompt produces: dir > c:\list.txt However only difference I need is the runtime of any and all video files included in the outputted file. Can this easily be done? Please let me know whether this can be done in the python terminal as well since I am familiar with that was well as Microsoft's dos prompt. Thank you so very much.

  Read the article

• How do I serve Ruby on Rails applications on Windows Server 2008?

  - by Adam Lassek

  I have spent the last several hours attempting to get Ruby on Rails running on a Windows server with no luck. At first I tried configuring a test application through IIS7's FastCGI support, but the documentation for this is not very good. I've been following this blog entry, and this one, and this one, and this one but everything seems to be missing major steps, or are out of date. And every article keeps linking back to this Howto from rubyonrails.org that doesn't exist. The sense that I'm getting is that even if I manage to make this work, IIS' FastCGI isn't good enough to use in a production environment anyway. So it looks like my best bet is to setup a reverse proxy in IIS that points to Apache & Mongrel/Passenger using ARR and UrlRewrite. Is there anybody else out there stuck deploying a Rails application on a Windows stack? Am I on the right track? Can you give me a better idea of how to configure this? I believe Plesk already installed an instance of Apache/Tomcat running on this server using a different port, so adding another virtual host shouldn't be difficult; the hardest part seems to be setting up the reverse proxy through IIS.

  Read the article

• Is it preferable to use POP or IMAP to check multiple google mail accounts from one?

  - by Adam Tuttle

  I have email accounts on several domains that use Google Mail, and thus far I've only ever used POP to send and receive mail from a single inbox. This is quite functional, and as long as I remember to select the appropriate FROM address when starting a new thread, mostly works without any additional thought: messages received on account A are replied to via account A, and so on. My only complaint is the lag -- I've seen sometimes as much as a half hour between messages arriving in an inbox before being imported into my primary inbox via POP. My question is this: Google also supports IMAP. Would that be in any way preferable over POP access? Reduced lag would be nice, but not at a general speed cost, if everything I do has to check another mailbox too.

  Read the article

• OpenVPN and Squid Setup troubleshooting

  - by Adam

  I am trying to setup squid to tunnel via openvpn so that I can just enter an Ip and port in my browser settings and use it as a US proxy. My server is a OpenVZ VM. Running into some issues: I setup openvpn using : http://safesrv.net/install-openvpn-on-centos/ as part of that guide I also ran: iptables -t nat -A POSTROUTING -o venet0 -j SNAT --to-source iptables -t nat -A POSTROUTING -s 10.8.0.0/24 -j SNAT --to-source Installed squid using this guide: http://www.server-world.info/en/note?os=CentOS_6&p=squid from that guide changed acl lan src 10.0.0.0/24 to acl lan src 10.8.0.0/24 Next, I went to my browser proxy settings and put - 10.8.0.1 in the HTTP field. Put the port I had setup in the squid config file and tried to load a page. Nothing connecting. Any help? What am I doing wrong?

  Read the article

• A Duplicate name exists on the network

  - by Adam

  Recently we changed out office IT structure from having a dedicated server to be the DC, a dedicated server for the exchange etc... (Each running Windows Server 2003 R2) Now we have a single server running Windows SBS 2008 and created a new domain (with a different domain name) We then changed every PC so it connected to the new domain and renamed every PC with a new naming structure. After I had done this, we were getting several PCs that would get the following message just before the login screen (Alt+Ctrl+Del Screen) A Duplicate name exists on the network I have checked the ADUC and have removed the trouble PCs from the list and renamed each PC and changed the SID before connecting back onto the domain but still getting this message. I have tried everything that i can think of but still getting the problem. Any help would be greatly appreticated.

  Read the article

• HDMI Disconnects after TV has been off for a while

  - by Adam Haile

  I have an EVGA NVidia GT 610 card in a media center PC running Windows 8 x64 When the TV has been turned off for a while and then turned back on, there will usually be no HDMI signal until I unplug the HDMI cable and plug it back in. Any ideas how what might be causing this or what I should check? I have the latest drivers from NVidia and the card recognizes the TV just fine. Also, my XBox 360 and PS3 work just fine and always show up.

  Read the article

• How to reduce the pain of the command prompt

  - by Adam

  I want to learn to use the command prompt better on Windows to have more control over what I do and just for the learning experience. The main annoyance I have right now is all of the typing. If I want to perform an operation on a file with a large path I'm sitting there typing it out for a minute at least, and if I make a mistake I have to press the up arrow key and scroll through the entire thing and find what I did wrong. Is there any tools to make this easier?

  Read the article

• (squid): failed to find or read error text file.

  - by adam

  There is something in our ERR_NO_RELAY that is causing this error to be logged and for the squid process to fail on start up. I can't show you the exact content of the file but I can tell you It has several lines of JavaScript When we remove the JavaScript, the problem goes away. This same file does not cause any issues other 3 instances of squid that we have running internally. All instances of squid came from the same VM images so they should be the same. We are unable to reproduce this issue except on the one box and we are unable to debug more on this box right now because it is running in production. I know these files are interpreted so squid can replace certain values available in the session so it may be that a syntax error caused this issue. That does not explain why we cannot reproduce it on other (virtually the same) images. One difference is that the instance of squid that has the issue was under load when the issue occurred. Any suggestions/insight would be appreciated. thanks!

  Read the article

• How can I get logrotate dateext to reflect the log date rather than the rotation date?

  - by Adam

  My Apache logrotate config looks like this: /var/log/http/*log { monthly dateext dateformat .%Y.%m [... rest stripped for brevity ...] } This works great, except that the date on the rotated filename is one period later than the period actually covered by the logs, for example error_log.2012.09 covers 2012-08-01 to 2012-08-31. I realize that there are other options for Apache (eg. cronolog), but I have a bunch of other logs that I also need to rotate, and logrotate is really exactly what I need apart from this one issue. Is there a way to get logrotate to use a date offset -- or, even better, figure out the previous time period -- when generating the rotated filename?

  Read the article

• Blue Screen error BAD_POOL_CALLER 0x000000C2

  - by Adam

  My computer was working fine for months but now when it starts up the Windows XP screen comes up to show the computer is starting up but then a blue screen appears with the error below: BAD_POOL_CALLER STOP: 0x000000C2 (0x00000043, 0xDB3C6000, 0x00000000, 0x00000000) I have tried booting off the Windows XP CD and trying to do a re-installation but when the setup try's to query the disk the setup crashes and exists. I've run diags and that says everything is fine. Any ideas?

  Read the article

• Network flooded with seemingly empty packets

  - by Adam Particka

  Let me preface this with the fact that I'm just a web developer at my company with little networking knowledge. Earlier today there was a department that lost all of their network connections so I popped open Wireshark and observed the influx of packets to my machine. There was normal traffic (ARP requests, etc.) coming in at ~50 packets every second. Then all of a sudden the log was flooded with packets arriving ~5000 a second. It looks as though they all contain the same data, just a looped sequence. We have someone here looking at it but I thought I would ask if anyone had seen anything like this before. Here's a selection from one of the captures in Wireshark. http://www.cloudshark.org/captures/06f950725c74

  Read the article

• Windows 7 File Transfer Speed over Gigabit is slow

  - by Adam Haile

  I've got windows 7 pro running on my file server and my main desktop. Each has a gigabit network connection and I'm connected to a gigabit switch. However, when trying to copy some large files, it's running pretty slow at a measly 12-15 MB/s The data is coming from a 7200RPM SATA drive (which I think should be good for almost 150MB/s) and going to a Drobo on the server connected via FireWire 800, so I can't think of any bottlenecks I might have in the hardware. But TeraCopy still says it's only going at 12-15 MB/s What else could be wrong here?

  Read the article

• What Logs / Process Stats to monitor on a Ubuntu FTP server?

  - by Adam Salkin

  I am administering a server with Ubuntu Server which is running pureFTP. So far all is well, but I would like to know what I should be monitoring so that I can spot any potential stability and security issues. I'm not looking for sophisticated software, more an idea of what logs and process statistics are most useful for checking on the health of the system. I'm thinking that I can look at various parameters output from the "ps" command and compare to see if I have things like memory leaks. But I would like to know what experienced admins do. Also, how do I do a disk check so that when I reboot, I don't get a message saying something like "disk not checked for x days, forcing check" which delays the reboot? I assume there is command that I can run as a cron job late at night. How often should it be run? What things should I be looking at to spot intrusion attempts? The only shell access is SSH on a non-standard port through UFW firewall, and I regularly do a grep on auth.log for "Fail" or "Invalid". Is there anything else I should look at? I was logging the firewall (UFW) but I have very few open ports (FTP and SSH on a non standard port) so looking at lists of IP's that have been blocked did not seem useful. Many thanks

  Read the article

• For web development which is more important - CPU and Graphics card OR Ram and SSD Harddrive?

  - by adam

  Buying a laptop is always hard work and questions about specific models dont age well on forums. A popular dilema (especially with apple macbooks) is whether to spend more for a faster cpu and graphics card but settle for standard ram and hd OR drop down and spend the savings on more ram and a faster harddrive such as a ssd. Im wondering for web development i.e. ide, unit tests, photoshop work and some user testing screen capturing now and again what would provide better performance. ( No games, music production or spielberg standard video editing.) For examples sake the current apple lineup for their 15inch macbookpros. 2.66 cpu i7 4gb ram 5400rpm drive 4gig ram vs 2.4 cpu i5 8gb ram 124gb sdd roughly the same price.

  Read the article

• Java Error Code 2753 Regutils.dll

  - by Adam

  Hello, I'm trying to install Java's JRE, however I'm running into problems. Recently the JRE was uninstalled on this computer, and when I try to reinstall I get this error 2753. I've looked online and the best page I've found to try and help is this one: http://forums.majorgeeks.com/showthread.php?t=182720 Which says to uninstall Java using Revo or Windows Cleanup. However nether program says I have Java installed. From what I've read this is a uninstall problem when Java is not really uninstalled. How do I make sure Java is completely uninstalled? Do you have any other suggestions for me to try?

  Read the article

• How to make using command prompt less painful

  - by Adam

  I want to learn to use the command prompt better on Windows to have more control over what I do and just for the learning experience. The main annoyance I have right now is all of the typing. If I want to perform an operation on a file with a large path I'm sitting there typing it out for a minute at least, and if I make a mistake I have to press the up arrow key and scroll through the entire thing and find what I did wrong. Is there any tools to make this easier?

  Read the article

• Mount drive at /Volumes/NAME/ or similar in Cygwin

  - by Adam

  Hi.. I'm using Cygwin on Windows 7. When I plug in an USB stick, the drive automatically gets mounted to /cygdrive/x . This is good and really easy to use. My problem is that the drive letter changes sometimes, and when I've got remotes set up in git - I've got one called usb at /cygdrive/h/ - this sometimes doesn't work and I have to change the remote URL. That's just an example, there are other scenarios where I wouldn't want it to change. I like what the Mac does, and puts mounts a volume at /Volumes/STICK (STICK is the Volume name of my usb stick). Is there any way I can do this, or something similar under Cygwin. Thanks

  Read the article

< Previous Page | 17 18 19 20 21 22 23 24 25 26 27 28  | Next Page >