Search Results

Search found 950 results on 38 pages for 'ashy 32bit'.

Page 21/38 | < Previous Page | 17 18 19 20 21 22 23 24 25 26 27 28  | Next Page >

• Prolific USB-to-Serial Comm Port significantly slower under Windows 7 comparing to Windows XP

  - by Dmitry S

  I am using a Prolific USB-to-Serial adapter based on the Prolific chip to use with a device on serial port. I have the latest version of the driver installed: 1.3.0 (2010-7-15). When I use my device with this adapter on my main Windows 7 (32bit) system it takes 8-9 seconds to send a command through to the device. However, when I do the same thing on a different Windows XP system (an old laptop I borrowed for testing) it only takes 2-3 seconds. I have made sure that the port settings and other variables are the same between systems. I also tested on a third laptop (also running Windows 7) and again got a significant delay. So the question is if anyone else experienced the same problem and found a solution. I would like to avoid moving to an XP system for what I need to achieve so that's my last option.

  Read the article

• Windows 7 Slowness following Virtual PC and Visual Studio Install

  - by Elliot Hughes

  I'm running Windows 7 32bit on a 3.2ghz Pentium D with 2gb RAM and a 1TB SATA hard drive. My system was running as fast as it ever has until I installed Visual Studio and Virtual PC a few days ago. Ever since - regardless of whether either application has been running the system has been running incredibly slowly. For example flash video plays jumpily, 3D games that used to run fine are now unplayable and even the smallest amount of multitasking makes the system unusable. I'm confident there is no virus or other such things present following scans in safemode and I'm fairly confident I've made no other changes to my system. Any ideas - I've run out of things to try!

  Read the article

• Remote Desktop connection repeatedly aborting

  - by DerKlaus

  I connect to my workplace computer using Remote Desktop. After 1-2 minutes the application freezes to tell me after one more minute that the connection was aborted. It then reconnects. Everything works again for 1-2 minutes. Then the process repeats. Probably Forever. My coworkers do not experience such problems when connecting to the workplace. My workplace computer: Windows 7 32bit My home computer: Windows 7 64bit connected to the internet via WLAN-router with integrated ADSL modem (Linksys WAG200G) Things I already tried to fix the problem: disabled the Windows firewall disabled the other firewall reduced the MTU upgraded the firmware on the router configured port-forwarding to forward all packets to my home computer The problem remains unchanged. What could be the cause of the connection aborts? What else can I try to fix the connection? Thanks in advance.

  Read the article

• Windows 7 - Windows get autoselected

  - by DjRikyx

  I have a really annoying problem in Windows 7. I just updated Windows vista to Windows 7 32bit The problem is that every second the top windows is being selected. To explain better what happens: I open task manager and leave it there, then i select a icon on desktop, after 1 second, the icon is deselected and Task Manager windows is selected. Also i see windows borders blinking, every second. This is Annoying, because every time i do a right click or selecting a menu in any application, every second the menu get closed... I do not know what is doing this, i searched in task manager for some 'bad' application running, but seems ok, tried closing all programs but it's still there. If i restart the computer first i don't get that problem, but after a while it start.. I noticed that When using Visual Studio Express 2012, but i don't think is the problem, because also if i close VS the problem remains. Hope you can help me, i'm getting hungry!! It's annoying!

  Read the article

• Performance difference between compiled and binary linux distributions/packages

  - by jozko

  I was searching a lot on the internet and couldn't find an exact answer. There are distros like Gentoo (or FreeBSD) which does not come with binaries but only with source code for packages (ports). The majority of distros uses binary backages (debian, etc.). First question: How much speed increase can I expect from compiled package? How much speed increase can I get from real world packages like apache or mysql? i.e. queries per second? Second question: Does binary package means it does not use any CPU instructions that was introduced after first AMD 64bit CPU? With the 32bit packages does it mean that the package will run on 386 and basically does not use most of the modern CPU instructions? Additional info: - I am not talking about desktop, but server environment. - I dont care about compile time - I have more servers, so speed increase more than 15% is worth for using source code packages - Please no flamewars. Thank you very much

  Read the article

• Raid HDD Boot up

  - by user234695

  My server is Power Edge 1950 running server 2008 32Bit, using 3 Physical SAS HDD as a Virtual 2 Disk configured for RAID5, with partition of C drive as OS and D drive as Data. Planning to format and install Server 2008 R2 64Bit so I insert a New Physical disk and configured as RAID5 and clone the C drive and D drive to the new hard disk. Now I need to test that the new hard disk is able to boot windows and work as expected. How do I test, I am not able to boot the windows by choosing the new harddisk, the bios show only the existing HDD, not the new one. Also, if I remove the old three hard disk, and leave the new harddisk and then am I able to boot the device, if I do this does my existing RAID5 configuration and data on the hard disk still remain.

  Read the article

• Only 2.99 Gb RAM usable out of 8GB in Windows 8 32 bit [closed]

  - by user1832280

  Possible Duplicate: 8gb ram in 32bit operating system I have installed 8 GB RAM in my system. Also upgraded OS to Windows 8 32 bit. My System configuration: Intel i7 960. Ram Crossair 4 GB X 2 1666Mhz Motherboard Asus Rampage III Gene Video card: NVIDIA GeForce GT 240. 2 TB Seagate I have updated all drivers BIOS also. But my system showing only 2.99 GB out of 8GB usable RAM. Please help me fix this problem.

  Read the article

• Windows Media Player library not appearing properly

  - by Rick

  Windows Media Player library is listed 80% under unknown artist/unknown album despite each song containing the album and artist details. The library location is usually unresponsive and Media Player 12 is usually hanging for 3 or 4 minutes every 5 or 6 minutes. Library was fine two weeks ago then I had updated and it has not worked right since. My PC specifics: Windows 7 Ultimate 32bit 8 GB ram Processor 3.76 Ghz Primary drive 1Tb Secondary drive 500Gb Default save for the library is on the secondary drive. I've already tried media player settings troubleshooter and the library troubleshooter to no avail.

  Read the article

• Nexus One USB freezes Vista SP2 Quad Core

  - by user25479

  My Nexus One (N1) will occasionally freeze my Vista 32bit SP2 Quad Core 2.4GHz during POST. MB is ASUS P5N-E SLI with 4GB of RAM. The PC will be booting and when I connect the N1 via USB, the boot sequence will freeze, then continue once I unplug the N1 USB link. It happens whether the N1 is in USB debugging mode and when it is not. I'm not sure whether this is an N1 hw/fw issue, system interaction with my PC, or a result of my N1 development environment (I'm using the Eclipse Galileo IDE for Java Developers, primarily compiling to API Level 7. Eclipse has also occasionally frozen although I haven't established N1 USB cause-and-effect on that issue). Is anyone else experiencing these symptom?

  Read the article

• How to Enable old networking protocols in Windows 7

  - by Will

  Hi, A few days ago I installed Win7 32bit on a PC and it wouldn't talk to my Lacie NAS which is running WinXP embedded. My other Win7 PC's had no problem. After a bit of searching I found a forum post that told me to enable older networking protocols on the Win7 PC, I think it was win98 protocols or something like that. I had to run a .msc program to do this. It fixed the problem. Now, I have a similar problem on another Win7 PC and for the life of me cannot find that posting and cannot remember what I did! Does anyone know the program or setting to do this? Thanks, Will.

  Read the article

• Server 2008 R2 .Net 4 Programs running from Network share won't work

  - by Lim

  we have several .Net Apps stored on a Network share on our old Server (Windows Server 2003). These Apps get called by Windows 7 32bit Clients and work perfectly fine. We recently wanted to upgrade our Server to Windows Server 2008 R2 and moved the Apps from the old share to our new share on the new Server. The problem started right afterwards since all of our .Net Programs won't start anymore from the new share (2008 R2). The Error that comes up is: "This application could not be started." and with a link to Microsoft: http://support.microsoft.com/kb/2715633 (This Error also shows up when i start a simple console HelloWorld from the server share created in VS2012) Does anyone have any Idea why this is not working anymore on the new Servershare? We've been searching for two days now with no result at all. Any Tips / Help / Questions appreciated :) Greetings Lim

  Read the article

• Cannot boot from windows 7 DVD

  - by webnoob

  Hi All, I have just purchased windows 7 64bit. I entered the disk in the drive and it told me I couldn't upgrade as I am using XP so I have tried to boot from CD instead but it doesn't work. It seems to look at the disk for a few seconds and then ends up at a screen saying windows failed to start and then I hit enter and it loads windows XP again. Does anyone know what could cause this? Here is my system info: Time of this report: 4/15/2010, 18:11:39 Machine name: MYCOMP Operating System: Windows XP Professional (5.1, Build 2600) Service Pack 3 (2600.xpsp_sp3_gdr.100216-1514) Language: English (Regional Setting: English) System Manufacturer: Dell Inc. System Model: OptiPlex 755 BIOS: Phoenix ROM BIOS PLUS Version 1.10 A09 Processor: Intel(R) Core(TM)2 Duo CPU E6550 @ 2.33GHz (2 CPUs) Memory: 3316MB RAM Page File: 568MB used, 4631MB available Windows Dir: C:\WINDOWS DirectX Version: DirectX 9.0c (4.09.0000.0904) DX Setup Parameters: Not found DxDiag Version: 5.03.2600.5512 32bit Unicode

  Read the article

• Cannot boot from windows 7 DVD

  - by webnoob

  Hi All, I have just purchased windows 7 64bit. I entered the disk in the drive and it told me I couldn't upgrade as I am using XP so I have tried to boot from CD instead but it doesn't work. It seems to look at the disk for a few seconds and then ends up at a screen saying windows failed to start and then I hit enter and it loads windows XP again. Does anyone know what could cause this? Here is my system info: Time of this report: 4/15/2010, 18:11:39 Machine name: MYCOMP Operating System: Windows XP Professional (5.1, Build 2600) Service Pack 3 (2600.xpsp_sp3_gdr.100216-1514) Language: English (Regional Setting: English) System Manufacturer: Dell Inc. System Model: OptiPlex 755 BIOS: Phoenix ROM BIOS PLUS Version 1.10 A09 Processor: Intel(R) Core(TM)2 Duo CPU E6550 @ 2.33GHz (2 CPUs) Memory: 3316MB RAM Page File: 568MB used, 4631MB available Windows Dir: C:\WINDOWS DirectX Version: DirectX 9.0c (4.09.0000.0904) DX Setup Parameters: Not found DxDiag Version: 5.03.2600.5512 32bit Unicode

  Read the article

• Password problem while creating domain

  - by Murdock

  Hi, I'm freshman so far in server management stuff but this seems to be clearly against logic. After updating my Windows Server 2008 Standard 32bit, installing DNS server and AD DS I wanted to create domain via using CMD and dcpromo.exe setup. But no matter if I disable demand for comlex password in Password policies or create a password which fully comply with requirements for strong and complex password, still I can't get any further and it says that my password doesn't meet requirements. I'm also asked there to activate password demand by NET USER -passwordreq:yes and when I do so, this password doesn't work any more and I have to remove it from other admin account to be at least able to login with proper Administrator account.

  Read the article

• How can give group in active directory folder access by group policy

  - by AAA-Super

  I have windows server 2003 64bit and my clients running on windows xp 32bit. My clients have user rights so they can't install any program. I have some programs needs admin rights for example I have French dictionary without admin right the program will not work properly. I don't want go to each PC and login with admin account then go to program folder located in programs files to give full permission to the group. Is there a way to add them folder in group policy so I can force all the PCs to have full access on the folder? Thanks you in advance.

  Read the article

• Reinstallation version Windows 7?

  - by DWBrayton

  I ordered a Windows 7 Home Premium 32bit os online and just received a DVD & Key Code sticker. The DVD label shows it to be a reinstallation DVD, Windows 7 Home Premium 32-bit Dell branded and states that the DVD is only to be used to reinstall the OS on a Dell PC. I built this PC & it previously has had XP Pro installed for the last several years. A couple of weeks ago I had a problem with some Malware & made the mistake of attempting to reinstall the XP Pro only to find out that MS has locked out my key, the same one I have been using on this built PC for the last 3 years. The previous PC was built by a local PC builder & I just reinstalled the OS on the new system. Should I send this Win7 DVD back to where I bought it, or can I use it? What a mess, Thanks DWB

  Read the article

• Thinkpad CPU temperature reaches 100°C after 10 minutes of heavy use

  - by Nicolas Raoul

  Less than two years ago, I bought a Lenovo Thinkpad R500. When using the CPU heavily, it sometimes decides to reboot. I am using Linux, and a widget shows me the CPU temperature. The PC usually reboots when the temperature of the first core gets over 100°C Since I switched from Ubuntu 2010.10 32bit to Ubuntu 2011.04 64bit, it crashes much more often. I survive using these techniques: When in the office, I use a laptopcooler. When outside, I underclock to 800 MHz, by doing so it does not get too warm. QUESTION: Is it normal that a Thinkpad crashes if the CPU is at 100% for more than 10 minutes? How can I use the full power of my computer, for instance when showing CPU-hungry business intelligence tools to clients? The computer does not really feel that hot. Maybe the sensor itself is reporting wrong temperatures? Can I tell the BIOS to ignore it?

  Read the article

• Not able to access other machines on network

  - by TheVillageIdiot

  Hi I'm running Windows 7 Enterprise (32bit) on my laptop. For some time I'm not able to access other machines using \\192.168.xxx.xxx. I've installed VM Ware player on my machine few days back but I don't remember if it happened just after that or there is some other reason behind it. EDIT:- I've disabled VMWare Bridge Protocol but still no effect. Please help me. PS:- I've used both wireless and wired networks. Network sharing is enabled and I can ping other machines but cannot access network shares. I get following message: \\xxx.xxx.xxx.xxx You might not have permission to use this network resource. Contact the administrator of this server to find out if you have acess permissions. The request is not supported. EDIT (2):- Network Discovery, File and Printer Sharing, Folder sharing are all on.

  Read the article

• Set defualt open with app to a python program on a Mac

  - by Vincent

  I use the open source application Ulipad http://code.google.com/p/ulipad/ do edit restructured text files (rst). It is a python application that I launch via terminal like so python32 UliPad.py I have python32 as an alias to the 32bit install of python on my machine. I have several versions installed. First I would like a way to launch ulipad like other osx apps. Not really sure how to do this. I would like to set all .rst files to be opened with UliPad.py. Is there a way to do this? I know how to choose the default app in finder but not sure how to choose ulipad as that app.

  Read the article

• How to fix bluescreen in windows 7 with multi-boot?

  - by Ismail Sensei

  I have HP laptop 6730S with two Operating systems : Windows 7 Ultimate 32bit Centos 6.4 64Bit The GRUB2 is not installed in MBR, use Windows' bootloader. After I choose Windows in the start, the blue-screen appears with unmountable_boot_volume problem so I tried some help from similar questions here ( use Command Prompt and enter the following command: chkdsk /R C: ). But the problem is, I can't get repair my computer it took so long and nothing happened after I waited more than 2H and when I put my Windows 7 DVD to boot it charge the files then same thing happened nothing show up so I couldn't use command prompt. But when I use Centos everything works just fine the D partition i can mounted normally but C partition it shows me error and tell me to go to windows and repair it with Chkdsk command and here is where I am stuck.

  Read the article

• Visual Studio Agents 2012 on Server 2003 SP2

  - by Corith Malin

  I'm attempting to build out our Lab Manager with TFS 2012. On a virtual machine running Server 2003 SP2 32bit, I'm attempting to install the Visual Studio Agents 2012 and am running into an error: Setup Failed! Install cannot continue because some required components failed. Microsoft .NET Framework 4.5 Asia Looking into it, the install log is erroring when it's attempting to install dotNetFx45_Full_x86_x64.exe component. Looking at that install log, it is failing with: The .NET Framework 4.5 is not supported on this operating system. So, I see according to the Agents 2012 MSDN documentation, that Server 2003 SP2 is supported by Agents 2012. But I also see that according to the .NET 4.5 MSDN documentation, Server 2003 isn't supported. So how do I install Agents 2012 on 2003 SP2 as the documentation implies I can?

  Read the article

• force other screen on boot

  - by PaoloFCantoni

  I have a multi-boot Windows 7 (32bit & 64 bit) on my HP Notebook. Unfortunately, the Notebook screen has been trashed (due to daughter dropping it). So I have attached a second screen. On the 64 bit system, after windows has started, the logon screen comes up on the 2nd monitor just fine. On the 32 bit system, the logon screen still comes up on the Notebook monitor and I have to open the lid, and shut it so that it then switches to the attached screen. In both cases the display has been set to only display on the attached screen (ie if I "identify" the attached screen says: '1'). Is there any setting I can use to force the OS to use the attached screen? TIA, Paolo

  Read the article

• What 64bit Desktop Linux (gui) Distribution can I run on an intel processor, especially in virtualbox on mac os x?

  - by cwd

  What 64bit Desktop Linux (GUI) Distribution can I run on an intel processor, especially in VirtualBox on Mac OS X? Ubuntu 32bit works well. ubuntu 64bit is for amd64 only, I think. I know Mac OS X is 64 bit Linux. This is not what I'm asking about. It would be lovely if you could recommend a small install, or one that has a live cd version. Update: I tried downloading the ubuntu-10.10-desktop-amd64.iso package and this is what i get:

  Read the article

• What are the correct set of DLLs and placement for SSL support in mIRC on 64 bit Windows?

  - by honkbish

  I am using mIRC 6.35 on a fresh install of Windows 7 64-bit. No matter what versions of the OpenSSL DLLs I use, nor where I place them, I cannot get mIRC to work with SSL; I get the "ssl not supported" error. The recommended DLLs on mIRC's help page (/ssl.html on the mIRC site) do not work no matter if I put them in the mIRC Program Files folder or anywhere else. Same with the DLLs from http://www.slproweb.com/products/Win32OpenSSL.html which also require Visual C++ runtimes. I am unsure if I need the 32bit DLLs (because mIRC itself is 32 bit), or the 64-bit DLLs, nor where to correctly place them. (Perhaps I currently have a case of incorrect DLLs in a path I am not aware of overriding the other placements...) Does ANYONE have any tips for 'debugging' this, or do they themselves have it working? Thanks in advance!

  Read the article

• Remote Desktop not following display settings

  - by John

  I have my RDP client set up to use highest settings for connecting to another PC on my LAN, which has display settings 1280x1024x32bit. RDP is specifically set to use 32bit depth, but when I connect it drops to 16bit. The PC I connect to is (amongst other things) used to do some 3D graphics. I don't expect great performance, just to check it works... but it doesn't over RDP, the 3D app doesn't think the hardware is the same. Does RDP's integration with Windows mean it is providing some virtualised rendering system? Should I use something less 'clever' like VNC, to literally screen-grab the contents of the screen without altering the settings?

  Read the article

< Previous Page | 17 18 19 20 21 22 23 24 25 26 27 28  | Next Page >