Search Results

Search found 1548 results on 62 pages for 'ben fletcher'.

Page 21/62 | < Previous Page | 17 18 19 20 21 22 23 24 25 26 27 28  | Next Page >

  • Permissions nightmare - tried all I know

    - by Ben
    Working on a new client's dev site, which is a wordpress install on a Plesk box. I have SSH root access, and FTP access through a separate account. What I've done so far Initially I couldn't make any changes to any files at all. The permissions on all the template files looked a little screwy (644), so I figured change them to allow group, and add myself to the group: CHMOD Recursive on the theme folder to set everything to 664 Quickly realised I'd broken it, set the folders to 755, kept files as 664 Ownership on all files is a mixture of root:root and 500:500 (there is no user nor group with the ID of 500 on the server). Added myself to the group 'root' so I could modify the files too The Problem This worked OK, in terms of being able to edit the existing files, so I began working. However, I can't upload to the directory, even having run CHOWN -R root:root templatefolder/ and being in the root group. I feel like I must be missing something obvious, and it's doing my head in. Questions: Files in the install owned by 500 with group 500 - I've looked in /etc/group and /etc/passwd and there is no user nor group with this ID. Is that left over from another developer's setup or the previous server (they moved recently)? Is being in the 'root' group enough, or do I need to own the theme folder as 'myftpuser' in order to upload and create new files? Like I say, I have edit access, so I got myself this far. I'm now questioning what to do next!

    Read the article

  • Exchange Server Contact Categories - How to Remove/Update All

    - by ben
    I've been tasked with cleaning up our companies contact database sitting on our Exchange Server 2003. The rub is this database of contacts has been neglected for the past couple of years and is now a bit messy. My issue is I have say a person named 'Bob Smith', and Bob is listed in multiple categories, 'Students' and 'Student'. I would really like to remove the 'Student' category from Bob and anyone else out there that has the same category. My question is, is there an easy way to edit the master category lists for contacts on the exchange server? I feel like I am missing something simple here since if I were playing with the categories that I use, to say organize email its very easy to do so, but I can't seem to find the proper way to do it for categories that are up on the server. I'm attempting to work through Outlook 2007 and Exchange 2003. Any insight would be very helpful as I really don't want to change 8000+ contacts by hand.

    Read the article

  • Plesk 9 VPS - Doesn't reply to NameServer requests (nslookup, etc)

    - by Ben
    Hi, I'm trying to troubleshoot a problem with a new VPS i'm setting up. The VPS is running Plesk 9 on a CentOS 5 system. Everything works fine, except it doesn't serve dns requests. If I try something like nslookup [somedomain.com] the.ser.ver.ip to test a DNS query, i get the following error ;; connection timed out; no servers could be reached I can't telnet to it on port 42 either.. I'm guessing something is blocking the requests.. firewall maybe? the plesk firewall module is installed and the nameservers entry is green. Any other way I can check what's blocking it on the server? Any help/tip greatly appreciated. Note: http works, i can telnet to the server on port 80 and i can also ping the server Thanks

    Read the article

  • 2.560 x 1.440 over HDMI

    - by ben
    Hi there, I have a acer 1810T and going to buy a Dell u2711 with a resolution of 2.560 x 1.440. The question is, can I connect the panel over HDMI with the acer and use the 2.560 x 1.440 res? Thanks for your help!

    Read the article

  • GitLab post-receive hook not firing

    - by Ben Graham
    Apologies if this isn't the right stackexchange. I have a GitLab install. It was installed over the top of a gitolite install that was only a few days old, and I assume this non-standard setup is at the root of my problem, but I cannot pin it down. The problem is straightforward: post-receive hooks are not fired. This prevents 'project activity' appearing in GitLab. The problem looks like: $ git push #... error: cannot run hooks/post-receive: No such file or directory Hook Exists The post-receive hook/symlink exists and is executable: -rwxr-xr-x 1 git git 470 Oct 3 2012 .gitolite/hooks/common/post-receive lrwxrwxrwx 1 git git 45 Oct 3 2012 repositories/project.git/hooks/post-receive -> /home/git/.gitolite/hooks/common/post-receive It's Executable By GitLab The gitlab user can execute the script (I have removed the /dev/null redirect and fed in blank input to get an 'OK' as output): sudo su - gitlab -c /home/git/.gitolite/hooks/common/post-receive OK GitLab Can Find It GitLab is looking for hooks in the correct location: $ grep hooks /srv/gitlab/gitlab/config/gitlab.yml hooks_path: /home/git/.gitolite/hooks/ and $ bundle exec rake gitlab:app:status RAILS_ENV=production # ... /home/git/.gitolite/hooks/common/post-receive exists? ............YES Environment The env -i line in the hook is commonly cited as an issue. I think that would occur after this problem, but for completeness, redis-cli is found OK: $ env -i redis-cli redis> I've run out of debugging ideas on this one. Does anybody have any suggestions?

    Read the article

  • Factory Reset Asus

    - by Ben
    I have an ASUS All-in-one PC (not sure what model) and I'm trying to perform a Factory Restore but nothing is working yet. I have tried pressing F8, all I had access to was "Restore from an earlier point" - Today was the earliest point; and "Restore from an Image" - which I don't have. I have tried pressing F9, F10, and F11, but all that brought me was options to Start Windows normally, Run a system diagnostic, or try other options (F8 menu). I don't have any other discs to restore from or anything, and I have found a tutorial to try and create a Partition(?) to load the restore from that. Does anyone have any other ideas?

    Read the article

  • Why is there a separate "unicorn_rails" for Rails apps?

    - by Ben Lee
    According to the Unicorn docs, there are different binaries for Rails apps and other Rack apps: non-Rails Rack applications In APP_ROOT, run: unicorn for Rails applications (should work for all 1.2 or later versions) In RAILS_ROOT, run: unicorn_rails They seem to also take the same command-line parameters. But Rails is built on top of rack, so I don't understand why this dichotomy is required. Is there any reason you can't just use unicorn for Rails apps?

    Read the article

  • Show full process name in top

    - by Ben K.
    I'm running a rails stack on ubuntu. When I ps -AF, I get a descriptive process name set by the apache module like 00:00:43 Rails: /var/www... which is really helpful in diagnosing load issues. But when I top, the same process show up simply as ruby Is there any way to get the ps -AF process name in top?

    Read the article

  • Print Preview Blank IE8

    - by Ben
    On a Windows XP, in IE8 print preview always appears completely blank except for header information. I can open the generated temp file in firefox and print it from there. I have tried browsing without addons to no success. I have tried re-creating the "%TEMP%\low" folder as described on the web, e.g. here: http://answers.microsoft.com/en-us/ie/forum/ie8-windows_xp/ie8-printing-does-not-work-preview-empty/920588e5-ccc4-4e24-83d6-606d5e3b1c70 ... all with no success.

    Read the article

  • A single AD user can't log into a single Mac bound to the domain (DirectoryServices error). How can I resolve this?

    - by Ben Wyatt
    On our campus, we have about 60 Macs joined to our Active Directory domain. Most users have no problems logging into Macs, as long as their accounts are configured correctly. However, we have one particular user who is unable to log in to just some of the Macs. He has no problem with most of them, but there is one group of them (all built from the same image) that he can't log in to. The machine in question is running OS X 10.6.2. The relevant entries from secure.log are below, with the hostname and username redacted. Aug 16 10:32:43 hostname SecurityAgent[4411]: Could not get the user record for username from DirectoryServices. Aug 16 10:32:43 hostname SecurityAgent[4411]: Will sleep 1 seconds and try again (retryCount = 4) Aug 16 10:32:44 hostname SecurityAgent[4411]: Could not get the user record for username from DirectoryServices. Aug 16 10:32:44 hostname SecurityAgent[4411]: Will sleep 2 seconds and try again (retryCount = 3) Aug 16 10:32:46 hostname SecurityAgent[4411]: Could not get the user record for username from DirectoryServices. Aug 16 10:32:46 hostname SecurityAgent[4411]: Will sleep 4 seconds and try again (retryCount = 2) Aug 16 10:33:10 hostname SecurityAgent[4411]: Could not get the user record for username from DirectoryServices. Aug 16 10:33:10 hostname SecurityAgent[4411]: Will sleep 8 seconds and try again (retryCount = 1) Aug 16 10:33:18 hostname SecurityAgent[4411]: User info context values set for username Aug 16 10:33:18 hostname SecurityAgent[4411]: unknown-user (username) login attempt PASSED for auditing Everything I've found online suggests that our use of Mobile Accounts is causing the issue. I turned that feature off, but I still can't log in as that user. id returns a record for his account, and nothing looks out of the ordinary. Has anyone here run into this before?

    Read the article

  • Alfred - Open group of files with specific apps

    - by Ben Humphreys
    I'm trying to create a way of opening a set of project files in multiple apps, using Alfred. I know about the File Group extension in the powerpack (I have this), but as far as I can see, there's a limitation in that it only opens the files with the default app. My usage case is this: Open a .html file with Chrome Open the same .html file with MacVim Anyone know a way around this? Maybe an applescript is more what I'd need?

    Read the article

  • Is it possible to have a conditional formatting cell "visually cycle" through all the formats that evaluated true?

    - by Ben
    Like the title says, "In Excel, when a cell has multiple conditional formatting rules that evaluate true, is it possible to have the cell "visually cycle" through all the formats that evaluated true? If not, suggestions on what to do would be appreciated!" I'm creating an employee schedule for a business that has multiple job areas that need to have an employee assigned to cover. The schedule is currently set up with the date on the top row, employee list down the left column, and the employee's assigned "job area" cross-referencing with the date on the top row. Originally it was set up where if every required "job area" didn't have someone assigned to it, the date would (via conditional formatting) change to red. I've set it up now that if a condition isn't met, the date will change to the color of the "job area" that doesn't have an employee assigned to it. However, there are cases where multiple job areas don't have an employee assigned, but the date will only change color based on the first condition that isn't met. It'd be nice if there was some way for the date cell to cycle through the different colors that correspond to the job areas where no one is assigned. I have a hunch that's not possible though. If it is possible, I'd love to know how to do it. And if it isn't, if anyone has any suggestions on how I can modify the Excel sheet to make it easier to identify the job areas that don't have anyone assigned to them, I would appreciate it. FYI This schedule goes out months in advance.

    Read the article

  • Will Windows XP work on a Hybrid Hard Drive?

    - by Ben Torell
    I'm looking into getting the Seagate Momentus XT hybrid hard drive, and I'm planning on dual booting between Windows 7 and Windows XP. I know 7 and Vista have native support for taking advantage of the SSD portion of a hybrid drive, and I assume XP does not have any such support, but will XP still work on the drive? I would think it will, but I wanted to be sure, and the Googles are coming up empty for me on this one. Thanks!

    Read the article

  • update ocz vertex le capacity via firmware update

    - by Ben Voigt
    I have an OCZ Vertex LE 100GB drive. It's actually 128GiB of NAND flash, with a whopping 28%+ reserved for write combining. Most 128GiB drives are actually ~ 115GB usable (and marketed as 120GB or 128GB). There were rumors that the reserved fraction could be decreased on OCZ 100GB drives. Can anyone provide a link to firmware that does that, or an official statement that no such firmware exists? (NB: I recently installed the 1.24 firmware from the OCZ site, it didn't affect the capacity. Possibly because the rumors say the capacity change is destructive to existing content.) Of possible interest: flashing firmware was more of a pain than it should have been -- the tool didn't detect the disk until I booted an older Windows install off a secondary hard disk, I suspect the Intel SATA driver is the issue and tool only works with the msachi.sys driver.

    Read the article

  • How to add a Mac to Windows Active Directory

    - by Ben Daniel
    I've gone into the Directory Utility on the mac, clicked on the services tab, entered the Active Directory Domain and Computer ID, clicked the Bind button and it showed a little status label which flickered through 5 of 5 steps and then said "An unknown error occurred". If I ignore the error and just click the OK button further down the screen and make sure the Active Directory service is ticked in the list of services, then go to the Directory Servers tab and try to add an Active Directory by entering my ad domain, computer id, admin username and password I get an error "Unable to add the domain. An unexpected error of type -14090 (eDSAuthFailed) occurred." Any ideas?

    Read the article

  • Two wireless NICs on a MacBook - can I bind all VPN traffic to one, and everything else to another?

    - by Ben Aston
    I frequently connect to my workplace over a VPN. I would like to continue watching videos from, say YouTube, whilst I work on the VPN, without degrading the available VPN bandwidth (say for an RDP session). Can I configure a second NIC to deal with only the VPN traffic, with everything else going over the primary? Specs as requested: Macbook Pro, OSX Snow Leopard, using the built in OSX VPN connectivity, the in-built airport card and a USB external wifi adapter.

    Read the article

  • Tab-completion friendly names for start / stop

    - by Ben Page
    I have many scripts that are used to start and stop services. It is frustrating when using tab completion that you need to type: ./serviceScript.sh [sta|sto] before there is enough information for tab-completion to complete the word start or stop. Does anyone have a different pair of words that could be sensibly used in the place of start stop, or alternatively, a better solution to my problem?

    Read the article

  • How to make subdirectory the document root of a web domain or localhost

    - by Ben Huh
    I have a subdirectory abc in the document root /var/www/html I want to be able to run any file any_file.html within the subdirectory by typing in the browser: localhost/any_file instead of localhost/abc/any_file.html or my_domain.com/any_file instead of my_domain.com/abc/any_file.html I tried writing in httpd.conf: <Directory "/var/www/html/abc"> RewriteEngine On RewriteBase / RewriteRule %{REQUEST_FILENAME} %{REQUEST_FILENAME}\.html </Directory> But it doesn't work. Options FollowSymLinks is activated in <Directory> so I believe I would not need to write this again. Does anyone knows why and how to solve it? Thanks. Update: I have another subdirectory efg which I need to be able to access through localhost.

    Read the article

  • Plesk 9 - Client panel access via client domain, not server host name

    - by Ben
    I've setup a Plesk 9 vps recently. The plesk admin is accessible at, say, http://superawesomedomain.com:8443. I'm setting up a couple of client domains on the server. I'd like clients to be able to access plesk via a similar url, but instead it would be something like http://inferiorclientdomain.com:8443. This works ok in a sense, but it always redirect the request for inferiorclientdomain.com:8443 to superawesomedomain.com:8443. I'd like the control panel access url to remain on inferiorclientdomain.com. Is that possible? EDIT: System Info. Plesk 9.5.2 on CentOS 5 (Build 95100504.12)

    Read the article

  • How to connect to memcached from another machine

    - by Oscar Del Ben
    I'm trying to use memcached from a different machine (which has access to my server), but I can't figure out how. on the memcached machine I can test the connection by running telnet 127.0.0.1 port And it works, but on the other machine it just keeps trying to connect telnet machine_address port Trying machine_address... I'm not sure if I should set up something else to get it working. I know the port is working and accessible because if I try to run other services on it, they works. Os is ubuntu

    Read the article

  • What features do you want to see in Windows Server?

    - by Ben Herila
    I work for the Windows Server planning and management team at Microsoft. While I can't share any of our current plans right now, I am interested in seeing what features people would like to see in the next release of Windows Server. Please post your ideas as separate answers, and vote for the ones you want to see. If there is an overwhelming response to an idea or two, I'll personally see what I can do to get the feature included. I know this question is subjective, but I do believe this thread has relevance to the community. Looking forward to hearing from you!

    Read the article

  • Difference between CurrentClockSpeed and MaxClockSpeed

    - by Ben
    Rationale this belongs on ServerFault rather than StackOverflow - I already have my program which gets the value, I am querying the value returned and what it means. I have an in-house program which audits our company PCs, and one of the things it checks is the speed of the processor. To do this, it queries the Win32_Processor WMI class and gets the value of CurrentClockSpeed. We were playing with the data today and found an anomaly with some of the speeds being reported incorrectly (for example, CurrentClockSpeed said 1.0GHz, whereas the CPU name said Intel(R) Core(TM)2 CPU T5600 @ 1.83GHz [Confirmed it is in fact 1.83GHz]). I did a bit of digging on the internet and found this blog post which might explain what is going on. My initial thought was that I could change the program to instead get the value for MaxClockSpeed instead of CurrentClockSpeed, but Microsoft's documentation doesn't clearly define what this will return. What I mean by that is will this return a value which is its actual maximum speed (say if it were overclocked) but which it would not normally be running at, or would it return what I expect, which is its maximum speed under normal (not overclocked) conditions?

    Read the article

  • Google Chrome issues

    - by Ben Hooper
    I'm an avid user of Chrome and would defend it to the death but there is no denying that it has issues, and I've been experiencing a lot of them recently. Issues Stuck tabs Issue: Around 60% of the time (higher when the system has just started), when Chrome is launched, some or all of the pinned tabs and startup pages will get stuck in the counter-clockwise-rotating "contacting server" mode and never snap out of it. Fix: Quit and launch Chrome until they load properly (this really isn't good, as quitting and launching Chrome can and has cleared all pinned tabs). Extra Information: If you stop the loading and re-enter the URL then the page will load perfectly. The amount of pinned tabs or startup pages seems to be irrelevant, but I could be wrong.   "Downloaded/out of" Issue: Each item in the download bar has a downloaded status section, formatted as "downloaded/out of". Sometimes Chrome doesn't display the "out of" part.   Collapsed settings windows Issue: In Chrome version 19(ish)+, settings are configured via overlayed / popup windows. Sometimes, the window will open fully collapsed. Fix: Resize Chrome's window or open the developer tools. "Network Error" with large downloads Issue: Sometimes, when downloading large files (500MB+) Chrome will download the entire file, the download status will freeze (for example, "1 GB/1 GB") for a few minutes, report "Network error", and delete the .crdownload file. Extra Information: The same file from the same website on the same computer downloads perfectly in other browsers. The website and file type seem to be irrelevant.   Information: I've experienced some of these issues on my home PC and some on my work PC, both of which are Windows 7 Ultimate x64. The only things that link them are my Google account (all settings are synced). Updating Chrome hasn't worked. Most of these issues presented themselves around about version 17 and have continued right through to 21 (current). Uninstalling Chrome, deleting all data in %programFiles(x86)%\Google and %localAppData%\Google, and reinstalling hasn't worked. I have yet to see whether disabling all extensions would make a difference, but it's hard to diagnose as these issues don't occur 100% of the time.   In my case, I don't know if there's an actual solution. I'm just curious as to whether anyone else is having similar issues to those that I'm experiencing. At least then I'll know it's an issue with Chrome itself.

    Read the article

  • Preventing some apps from appearing on the start menu on vista

    - by Ben
    Vista start menu shows your most frequently used apps, which is great, I love it. However, there are some apps which I use frequently through shell or such, that I do not want to appear on that menu. Winrar, Media Player Classic, Infranview... I can right click on it to remove it, but it'll return to the menu shortly, how can I set it so that those apps never appear on the start menu. Thanks.

    Read the article

< Previous Page | 17 18 19 20 21 22 23 24 25 26 27 28  | Next Page >