Search Results

Search found 629 results on 26 pages for 'construction'.

Page 21/26 | < Previous Page | 17 18 19 20 21 22 23 24 25 26  | Next Page >

• My shiny new gadget

  - by TechTwaddle

  About 3 months ago when I had tweeted (or twit?) that the HD7 could be my next phone I wasn’t a 100 percent sure, and when the HTC Mozart came out it was switch at first sight. I wanted to buy the Mozart mainly for three reasons; its unibody construction, smaller screen and the SLCD display. But now, holding a HD7 in my hand, I reminisce and think about how fate had its own plan. Too dramatic for a piece of gadget? Well, sort of, but seriously, this has been most exciting. So in short, I bought myself a HTC HD7 and am really loving it so far. Here are some pics (taken from my HD2 which now lies in a corner, crying),     Most of my day was spent setting up the device. Email accounts, Facebook, Marketplace etc. Since marketplace isn’t officially launched in India yet, my primary live id did not work. Whenever I tried launching marketplace it would say ‘marketplace is not currently supported in your country’. Searching the forums I found an easy work around. Just create a dummy live id with the country set to UK or US and log in to the device using this id. I was worried if the contacts and feeds from my primary live account would not be updated but that was not a problem. Adding another live account into the device does import your contacts, calendar and feeds from it. And that’s it, marketplace now works perfectly. I installed a few trial and free applications; haven’t checked if I can purchase apps though, will check that later and update this post. There is one issue I am still facing with the device, I can’t access the internet over GPRS. Windows Phone 7 only gives you the option to add an ‘APN’ and nothing else. Checking the connection settings on my HD2, I found out that there is also a proxy server I need to add to access GPRS, but so far I haven’t found a way to do that on WP7. Ideally HTC should have taken care of this, detect the operator and apply that operators settings on the device, but looks like that’s not happening. I also tried the ‘Connection Settings’ application that HTC bundled with the device, but it did nothing magical. If you’re reading this and know how to fix this problem please leave a comment. The next thing I did is install apps, a lot of apps. Read Engadget’s guide to essential apps for WP7. The apps and games I installed so far include Beezz (twitter app with push notifications), twitter (the official twitter app), Facebook, Youtube, NFS Undercover, Rocket Riot, Krashlander, Unite and the list goes on. All the apps run super smooth. The display looks fine indoors but I know it’s going to suck in bright sunlight. Anyhow, I am really impressed with what I’ve seen so far. I leave you with a few more photos. Have a great year ahead. Ciao!

  Read the article

• Successfully Deliver on State and Local Capital Projects through Project Portfolio Management

  - by Sylvie MacKenzie, PMP

  Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} While the debate continues on Capitol Hill about which federal programs to cut and which to keep, communities and towns across America are feeling the budget crunch closer to home. State and local governments are trying to save as many projects as they can without promising too much to constituents – and they, in turn, want to know where their tax dollars are going. Fortunately, with the right planning and management, you can deliver successful projects and portfolios on a limited budget. Watch the replay of our recent webcast with Oracle Primavera and Industry Product Manager Garrett Harley that will demonstrate how state and local governments can get the most out of their capital projects and learn how two Oracle Primavera customers have implemented project portfolio management practices to: Predict the cost of long-term capital programs and projects Assess risk and mitigation strategies Collaborate and track performance across government agencies Speakers: Garrett Harley, Industry and Product Manager, Oracle Primavera Cory Davis, Director of Capital Renovation and New Construction, Chicago Public Schools Julie Owen, PSP™, CCC™, Sr. Project Controls Manager,LA Metro Transit Authority With the right planning and management, state and local governments can deliver successful projects on a limited budget. 1024x768 Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Times New Roman","serif"; mso-fareast-font-family:"Times New Roman";}

  Read the article

• MEF CompositionInitializer for WPF

  - by Reed

  The Managed Extensibility Framework is an amazingly useful addition to the .NET Framework.  I was very excited to see System.ComponentModel.Composition added to the core framework.  Personally, I feel that MEF is one tool I’ve always been missing in my .NET development. Unfortunately, one perfect scenario for MEF tends to fall short of it’s full potential is in Windows Presentation Foundation development.  In particular, there are many times when the XAML parser constructs objects in WPF development, which makes composition of those parts difficult.  The current release of MEF (Preview Release 9) addresses this for Silverlight developers via System.ComponentModel.Composition.CompositionInitializer.  However, there is no equivalent class for WPF developers. The CompositionInitializer class provides the means for an object to compose itself.  This is very useful with WPF and Silverlight development, since it allows a View, such as a UserControl, to be generated via the standard XAML parser, and still automatically pull in the appropriate ViewModel in an extensible manner.  Glenn Block has demonstrated the usage for Silverlight in detail, but the same issues apply in WPF. As an example, let’s take a look at a very simple case.  Take the following XAML for a Window: <Window x:Class="WpfApplication1.MainView" xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation" xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml" Title="MainWindow" Height="220" Width="300"> <Grid> <TextBlock Text="{Binding TheText}" /> </Grid> </Window> This does nothing but create a Window, add a simple TextBlock control, and use it to display the value of our “TheText” property in our DataContext class.  Since this is our main window, WPF will automatically construct and display this Window, so we need to handle constructing the DataContext and setting it ourselves. We could do this in code or in XAML, but in order to do it directly, we would need to hard code the ViewModel type directly into our XAML code, or we would need to construct the ViewModel class and set it in the code behind.  Both have disadvantages, and the disadvantages grow if we’re using MEF to compose our ViewModel. Ideally, we’d like to be able to have MEF construct our ViewModel for us.  This way, it can provide any construction requirements for our ViewModel via [ImportingConstructor], and it can handle fully composing the imported properties on our ViewModel.  CompositionInitializer allows this to occur. We use CompositionInitializer within our View’s constructor, and use it for self-composition of our View.  Using CompositionInitializer, we can modify our code behind to: public partial class MainView : Window { public MainView() { InitializeComponent(); CompositionInitializer.SatisfyImports(this); } [Import("MainViewModel")] public object ViewModel { get { return this.DataContext; } set { this.DataContext = value; } } } We then can add an Export on our ViewModel class like so: [Export("MainViewModel")] public class MainViewModel { public string TheText { get { return "Hello World!"; } } } MEF will automatically compose our application, decoupling our ViewModel injection to the DataContext of our View until runtime.  When we run this, we’ll see: There are many other approaches for using MEF to wire up the extensible parts within your application, of course.  However, any time an object is going to be constructed by code outside of your control, CompositionInitializer allows us to continue to use MEF to satisfy the import requirements of that object. In order to use this from WPF, I’ve ported the code from MEF Preview 9 and Glenn Block’s (now obsolete) PartInitializer port to Windows Presentation Foundation.  There are some subtle changes from the Silverlight port, mainly to handle running in a desktop application context.  The default behavior of my port is to construct an AggregateCatalog containing a DirectoryCatalog set to the location of the entry assembly of the application.  In addition, if an “Extensions” folder exists under the entry assembly’s directory, a second DirectoryCatalog for that folder will be included.  This behavior can be overridden by specifying a CompositionContainer or one or more ComposablePartCatalogs to the System.ComponentModel.Composition.Hosting.CompositionHost static class prior to the first use of CompositionInitializer. Please download CompositionInitializer and CompositionHost for VS 2010 RC, and contact me with any feedback. Composition.Initialization.Desktop.zip Edit on 3/29: Glenn Block has since updated his version of CompositionInitializer (and ExportFactory<T>!), and made it available here: http://cid-f8b2fd72406fb218.skydrive.live.com/self.aspx/blog/Composition.Initialization.Desktop.zip This is a .NET 3.5 solution, and should soon be pushed to CodePlex, and made available on the main MEF site.

  Read the article

• Parallelism in .NET – Part 13, Introducing the Task class

  - by Reed

  Once we’ve used a task-based decomposition to decompose a problem, we need a clean abstraction usable to implement the resulting decomposition.  Given that task decomposition is founded upon defining discrete tasks, .NET 4 has introduced a new API for dealing with task related issues, the aptly named Task class. The Task class is a wrapper for a delegate representing a single, discrete task within your decomposition.  We will go into various methods of construction for tasks later, but, when reduced to its fundamentals, an instance of a Task is nothing more than a wrapper around a delegate with some utility functionality added.  In order to fully understand the Task class within the new Task Parallel Library, it is important to realize that a task really is just a delegate – nothing more.  In particular, note that I never mentioned threading or parallelism in my description of a Task.  Although the Task class exists in the new System.Threading.Tasks namespace: Tasks are not directly related to threads or multithreading. Of course, Task instances will typically be used in our implementation of concurrency within an application, but the Task class itself does not provide the concurrency used.  The Task API supports using Tasks in an entirely single threaded, synchronous manner. Tasks are very much like standard delegates.  You can execute a task synchronously via Task.RunSynchronously(), or you can use Task.Start() to schedule a task to run, typically asynchronously.  This is very similar to using delegate.Invoke to execute a delegate synchronously, or using delegate.BeginInvoke to execute it asynchronously. The Task class adds some nice functionality on top of a standard delegate which improves usability in both synchronous and multithreaded environments. The first addition provided by Task is a means of handling cancellation via the new unified cancellation mechanism of .NET 4.  If the wrapped delegate within a Task raises an OperationCanceledException during it’s operation, which is typically generated via calling ThrowIfCancellationRequested on a CancellationToken, or if the CancellationToken used to construct a Task instance is flagged as canceled, the Task’s IsCanceled property will be set to true automatically.  This provides a clean way to determine whether a Task has been canceled, often without requiring specific exception handling. Tasks also provide a clean API which can be used for waiting on a task.  Although the Task class explicitly implements IAsyncResult, Tasks provide a nicer usage model than the traditional .NET Asynchronous Programming Model.  Instead of needing to track an IAsyncResult handle, you can just directly call Task.Wait() to block until a Task has completed.  Overloads exist for providing a timeout, a CancellationToken, or both to prevent waiting indefinitely.  In addition, the Task class provides static methods for waiting on multiple tasks – Task.WaitAll and Task.WaitAny, again with overloads providing time out options.  This provides a very simple, clean API for waiting on single or multiple tasks. Finally, Tasks provide a much nicer model for Exception handling.  If the delegate wrapped within a Task raises an exception, the exception will automatically get wrapped into an AggregateException and exposed via the Task.Exception property.  This exception is stored with the Task directly, and does not tear down the application.  Later, when Task.Wait() (or Task.WaitAll or Task.WaitAny) is called on this task, an AggregateException will be raised at that point if any of the tasks raised an exception.  For example, suppose we have the following code: Task taskOne = new Task( () => { throw new ApplicationException("Random Exception!"); }); Task taskTwo = new Task( () => { throw new ArgumentException("Different exception here"); }); // Start the tasks taskOne.Start(); taskTwo.Start(); try { Task.WaitAll(new[] { taskOne, taskTwo }); } catch (AggregateException e) { Console.WriteLine(e.InnerExceptions.Count); foreach (var inner in e.InnerExceptions) Console.WriteLine(inner.Message); } .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } Here, our routine will print: 2 Different exception here Random Exception! Note that we had two separate tasks, each of which raised two distinctly different types of exceptions.  We can handle this cleanly, with very little code, in a much nicer manner than the Asynchronous Programming API.  We no longer need to handle TargetInvocationException or worry about implementing the Event-based Asynchronous Pattern properly by setting the AsyncCompletedEventArgs.Error property.  Instead, we just raise our exception as normal, and handle AggregateException in a single location in our calling code.

  Read the article

• Render MVCContrib Grid with No Header Row

  - by Ben Griswold

  The MVCContrib Grid allows for the easy construction of HTML tables for displaying data from a collection of Model objects. I add this component to all of my ASP.NET MVC projects.  If you aren’t familiar with what the grid has to offer, it’s worth the looking into. What you may notice in the busy example below is the fact that I render my column headers independent of the grid contents.  This allows me to keep my headers fixed while the user searches through the table content which is displayed in a scrollable div*.  Thus, I needed a way to render my grid without headers. That’s where Grid Renderers come into play.  <table border="0" cellspacing="0" cellpadding="0" class="projectHeaderTable">     <tr>         <td class="memberTableMemberHeader">             <%= Html.GridColumnHeader("Member", "Index", "MemberFullName")%>              </td>         <td class="memberTableRoleHeader">             <%= Html.GridColumnHeader("Role", "Index", "ProjectRoleTypeName")%>              </td>                <td class="memberTableActionHeader">             Action         </td>     </tr> </table> <div class="scrollContentWrapper"> <% Html.Grid(Model)     .Columns(column =>             {                 column.For(c => c.MemberFullName).Attributes(@class => "memberTableMemberCol");                 column.For(c => c.ProjectRoleTypeName).Attributes(@class => "memberTableRoleCol");                 column.For(x => Html.ActionLink("View", "Details", new { Id = x.ProjectMemberId }) + " | " +                                 Html.ActionLink("Edit", "Edit", new { Id = x.ProjectMemberId }) + " | " +                                 Html.ActionLink("Remove", "Delete", new { Id = x.ProjectMemberId }))                     .Attributes(@class => "memberTableActionCol").DoNotEncode();             })     .Empty("There are no members associated with this project.")     .Attributes(@class => "lbContent")     .RenderUsing(new GridNoHeaderRenderer<ProjectMemberDetailsViewModel>())     .Render(); %> </div> <div class="scrollContentBottom">     <!– –> </div> <%=Html.Pager(Model) %> Maybe you noticed the reference to the GridNoHeaderRenderer class above?  Yep, rendering the grid with no header is straightforward.   public class GridNoHeaderRenderer<T> :     HtmlTableGridRenderer<T> where T: class {     protected override bool RenderHeader()     {         // Explicitly returning true would suppress the header         // just fine, however, Render() will always assume that         // items exist in collection and RenderEmpty() will         // never be called.           // In other words, return ShouldRenderHeader() if you         // want to maintain the Empty text when no items exist.         return ShouldRenderHeader();     } } Well, if you read through the comments, there is one catch.  You might be tempted to have the RenderHeader method always return true.  This would work just fine but you should return the result of ShouldRenderHeader() instead so the Empty text will continue to display if there are no items in the collection. The GridRenderer feature found in the MVCContrib Grid is so well put together, I just had to share.  * Though you can find countless alternatives to the fixed headers problem online, this is the only solution that I’ve ever found to reliably work across browsers. If you know something I don’t, please share.

  Read the article

• SharePoint Saturday Michigan 2010 Recap, Slides, and Photos

  - by Brian Jackett

  This past weekend I attended SharePoint Saturday Michigan (SPSMI) in Ann Arbor, Michigan.  For those unfamiliar, SharePoint Saturday is a community driven event where various speakers gather to present at a FREE conference on all topics related to SharePoint.  This made my third SharePoint Saturday attended and second I’ve spoken at.  I believe today it was announced that about 210 people total attended the event.  I was very happy with the turnout, especially the ratio of male to female attendees.  Typically with computer related conferences the ratio leans towards more males attending, but both Peter Serzo (one of conference organizers) and I both commented to each other that at the end of the day it appeared to be close to 40% women in the crowd.  So here’s my recap of the weekend. Arrival     Friday afternoon I drove up from Columbus, OH to Ann Arbor, MI and arrived around 4pm.  I was attempting to avoid the rush hour traffic and construction backups.  Turned out to be a good idea because other speakers coming up Friday got stuck on a highway which literally closed down in both directions due to a bad accident.  I was talking my friend Sean McDonough through the highway closing and this was the first time I had seen a solid black traffic line on Google Maps.  Most of us are familiar with Green, Yellow, and Red, but this line was black if that tells you how bad it got. Speaker “Dinner”     Fast forward a few hours and it was time for the speaker “dinner.”  I put “dinner” in quotes because with this night alone SPSMI set a new bar for nicest and most extravagant speaker appreciation events for SharePoint Saturday.  By tapping into some very influential contacts, the conference organizers were able to provide a truck limo (yep you heard right) with refreshments, access to an underground suite at the Palace of Auburn Hills, and courtside tickets to see the Detroit Pistons play that night.  Being a Michigan native I have to say that I was absolutely floored by this experience and very thankful to our conference organizers Peter, Sebastian, and Jesse along with Trillium Teamologies. Sessions     The actual conference started Saturday morning at 9am with the keynote by Rob Collie who is the Microsoft program manager for PowerPivot.  The day continued and I attended the following sessions: Mike Watson (@mikewat) – “SharePoint 2010 Fight Night: Devs vs. Admins” Karl Swedeberg (@kswedberg) – “A Walk on the Client Side with jQuery“ [my session] Brian Jackett (@briantjackett) - “Real World Deployment of SharePoint 2007 Solutions” Jeff Willinger (@jwillie) - “Social Computing and Collaboration Inside and Outside the 4 Walls” Paul Schaeflein (@paulschaeflein) – “PowerShell for the SharePoint Developer” My Presentation     I had a great time presenting my session on Deploying SharePoint 2007 Solutions, but it wasn’t without its fair share of technical issues.  As my session was right after lunch I came in to my room 10 mins early to set up my laptop, slides, and demos.  As a quick background note, a few months ago I got an upgraded laptop from my company Sogeti and have been dual booting it between XP (factory installed) and Windows Server 2008 R2 w/ Hyper-V.  As such I had prepared all of my demo virtual machines to run under Hyper-V.  About 3 minutes before my session was scheduled to start though it became apparent that I did not have the correct display drivers to connect Windows Server 2008 R2 to the projector…     As you can imagine this was a slight cause for concern as I was potentially going to be unable to give my presentation.  Luckily for me I usually prepare for such unforeseen issues and had my presentation and some spare VMs that would run on XP on my external hard drive.  Knowing this I rebooted my machine into XP and began my presentation without slides until about 5 mins into the session when everything was up and running on XP.  Despite this being the first time I gave this presentation I have to say it was one of my favorites I’ve given so far.  The audience was very engaged in the session and I received some great, positive feedback afterwards.  Thanks to all who attended my session, I appreciate it very much. Link to Presentation Files     For those of you who attended my session and would like my slides or demo PowerShell scripts they can be found on my SkyDrive at the link below.  Also, if you have a few minutes and wouldn’t mind rating my session I have this session posted on SpeakerRate.  As speakers we always appreciate any and all feedback attendees offer, so thank you if you are able to provide any. SkyDrive folder with session files Rate my SharePoint 2007 Solutions session   Picture Albums     For everyone else, here are my pictures from the weekend.  The first link is to my FaceBook album which will have tagging (recommend this one.)  The second is to my Live album if you care for higher resolution images. http://www.facebook.com/album.php?aid=2154482&id=21905041&l=a3fb72ee8c View Full Album Conclusion     A big thank you goes out to all of the organizers, speakers, sponsors, and attendees of SPSMI.  As I’ve said so many times, without each and every one of you these events wouldn’t be possible.  I thoroughly enjoyed this trip back to my home state and presenting a new session.  For those interested in my upcoming schedule I will be giving two sessions on PowerShell at SharePoint Saturday Charlotte in April, helping plan Stir Trek: Iron Man Edition in May, and I’m submitting sessions to Day of .Net Ann Arbor in May as well.  Beyond that I haven’t planned out any travels.  Thanks for reading my recap.  Look forward to more technical posts now that I have a short break in conferences.         -Frog Out   links: Michigan image

  Read the article

• Pella Increases Online Appointment Scheduling and Rapidly Personalizes and Updates Marketing Initiatives

  - by Michael Snow

  Originally posted on Oracle Customers page.Oracle Customer: Pella CorporationLocation:  Pella, IowaIndustry: Industrial Manufacturing Employees:  7,100 Pella Corporation is an innovative leader in creating a better view for homes and businesses by designing, testing, manufacturing, and installing quality windows and doors for new construction, remodeling, and replacement applications. A family-owned company, Pella has an 88-year history of innovation and, today, is the second-largest manufacturer in the country of windows and doors, including patio, entry, and storm doors. The company has 10 manufacturing facilities in United States and window and door showrooms across the United States and Canada. In-home consultations are an important part of Pella’s sales process. Several years ago, the company launched an online appointment scheduling tool to improve customer convenience. While the functionality worked well, the company wanted to increase online conversion rates and decrease the number of incomplete, online appointment schedules. It also wanted to give its business analysts and other line-of-business personnel the ability to update the scheduling tool and interface quickly, without needing IT team intervention and recoding, to better capitalize on opportunities and personalize the interface for specific markets. Pella also looked to reduce IT complexity by selecting a system that integrated easily with its Oracle E-Business Suite Release 12.1 enterprise applications.Pella, which has a large Oracle footprint, selected Oracle WebCenter Sites as the foundation for its new, real-time appointment scheduling application. It used the solution to re-engineer the scheduling process and the information required to set up an appointment. Just a few months after launch, it is seeing improvement in the number of appointments booked online and experiencing fewer abandoned appointments during the scheduling process. As important, Pella can now quickly and easily make changes to images, video, and content displayed on the scheduling tool interface, delivering greater business agility. Previously, such changes required a developer and weeks of coding and testing. Today, a member of Pella’s business analyst team can complete the changes in hours. This capability enables Pella to personalize the Web experience for customers. For example, it can display different products or images for clients in different regions.The solution is also highly scalable. Pella is using Oracle WebCenter Sites for appointment scheduling now and plans to migrate Pella.com, its configurator tool, and dealer microsites onto the platform. Further, Pella plans to leverage the solution to optimize mobile devices. “Moving ahead, we expect to extensively leverage Oracle WebCenter Sites to gain greater flexibility in updating the Web experience, thanks to the ability to make updates quickly without developer resources. Segmentation and targeting capabilities will allow us to create a more personalized experience across both traditional and mobile platforms,” said Teri Lancaster, IT manager, customer experience applications, Pella Corporation. A word from Pella Corporation "Oracle WebCenter Sites?from the start?delivered important benefits. We’ve redesigned the online scheduling process and are seeing more potential customers completing consultation bookings online. More important, the solution opens a world of other possibilities as we plan to migrate Pella.com and our dealer microsites to the platform, and leverage it to optimize the Web experience for our mobile devices.” – Teri Lancaster, IT Manager, Customer Experience Applications, Pella Corporation Oracle Product and Services Oracle WebCenter Sites Why Oracle Pella has a long-standing relationship with Oracle. “We look to Oracle first for a solution. Our Oracle account team came to us with several solutions, and Oracle WebCenter Sites delivered the scalability, ease-of-use, flexibility, and scalability that we required for the appointment scheduling initiative and other Web projects on the horizon, including migrating Pella.com and optimizing our site for mobile platforms,”said Teri Lancaster, IT manager, customer experience applications, Pella Corporation. Implementation Process The Pella implementation team, working with Oracle partner Element Solutions, LLC, integrated the appointment setting application with Pella.com as well as the company’s Oracle E-Business Suite customer relationship management applications. Using Oracle WebCenter Site’s development tools and subversion capabilities to develop the application, the Element Solutions and Pella teams could work remotely and collaboratively, accelerating deployment. Pella went live with the new scheduling tool in just six months. Partner Oracle PartnerElement Solutions, LLC Element Solutions was instrumental at every major stage of the project, including design creation and approval, development, training, and rollout. “Element Solutions was a vital partner for our Oracle WebCenter Sites initiative. The team provided guidance, and more important, critical knowledge transfer at every stage?which equipped us to get the most out of this powerful and versatile solution. We were definitely collaboration partners,” Lancaster said. Resources Pella Corporation Upgrades Enterprise Applications to Continue to Improve Manufacturing Efficiency Thousands of Customers Successfully and Smoothly Upgrade to Oracle E-Business Suite 12.1 for New Functionality, Lower Operating Costs and Improved Shared Operations Managing the Virtual World

  Read the article

• concurrency::accelerator

  - by Daniel Moth

  Overview An accelerator represents a "target" on which C++ AMP code can execute and where data can reside. Typically (but not necessarily) an accelerator is a GPU device. Accelerators are represented in C++ AMP as objects of the accelerator class. For many scenarios, you do not need to obtain an accelerator object, since the runtime has a notion of a default accelerator, which is what it thinks is the best one in the system. Examples where you need to deal with accelerator objects are if you need to pick your own accelerator (based on your specific criteria), or if you need to use more than one accelerators from your app. Construction and operator usage You can query and obtain a std::vector of all the accelerators on your system, which the runtime discovers on startup. Beyond enumerating accelerators, you can also create one directly by passing to the constructor a system-wide unique path to a device if you know it (i.e. the “Device Instance Path” property for the device in Device Manager), e.g. accelerator acc(L"PCI\\VEN_1002&DEV_6898&SUBSYS_0B001002etc"); There are some predefined strings (for predefined accelerators) that you can pass to the accelerator constructor (and there are corresponding constants for those on the accelerator class itself, so you don’t have to hardcode them every time). Examples are the following: accelerator::default_accelerator represents the default accelerator that the C++ AMP runtime picks for you if you don’t pick one (the heuristics of how it picks one will be covered in a future post). Example: accelerator acc; accelerator::direct3d_ref represents the reference rasterizer emulator that simulates a direct3d device on the CPU (in a very slow manner). This emulator is available on systems with Visual Studio installed and is useful for debugging. More on debugging in general in future posts. Example: accelerator acc(accelerator::direct3d_ref); accelerator::direct3d_warp represents a target that I will cover in future blog posts. Example: accelerator acc(accelerator::direct3d_warp); accelerator::cpu_accelerator represents the CPU. In this first release the only use of this accelerator is for using the staging arrays technique that I'll cover separately. Example: accelerator acc(accelerator::cpu_accelerator); You can also create an accelerator by shallow copying another accelerator instance (via the corresponding constructor) or simply assigning it to another accelerator instance (via the operator overloading of =). Speaking of operator overloading, you can also compare (for equality and inequality) two accelerator objects between them to determine if they refer to the same underlying device. Querying accelerator characteristics Given an accelerator object, you can access its description, version, device path, size of dedicated memory in KB, whether it is some kind of emulator, whether it has a display attached, whether it supports double precision, and whether it was created with the debugging layer enabled for extensive error reporting. Below is example code that accesses some of the properties; in your real code you'd probably be checking one or more of them in order to pick an accelerator (or check that the default one is good enough for your specific workload): void inspect_accelerator(concurrency::accelerator acc) { std::wcout << "New accelerator: " << acc.description << std::endl; std::wcout << "is_debug = " << acc.is_debug << std::endl; std::wcout << "is_emulated = " << acc.is_emulated << std::endl; std::wcout << "dedicated_memory = " << acc.dedicated_memory << std::endl; std::wcout << "device_path = " << acc.device_path << std::endl; std::wcout << "has_display = " << acc.has_display << std::endl; std::wcout << "version = " << (acc.version >> 16) << '.' << (acc.version & 0xFFFF) << std::endl; } accelerator_view In my next blog post I'll cover a related class: accelerator_view. Suffice to say here that each accelerator may have from 1..n related accelerator_view objects. You can get the accelerator_view from an accelerator via the default_view property, or create new ones by invoking the create_view method that creates an accelerator_view object for you (by also accepting a queuing_mode enum value of deferred or immediate that we'll also explore in the next blog post). Comments about this post by Daniel Moth welcome at the original blog.

  Read the article

• Working with Reporting Services Filters–Part 1

  - by smisner

  There are two ways that you can filter data in Reporting Services. The first way, which usually provides a faster performance, is to use query parameters to apply a filter using the WHERE clause in a SQL statement. In that case, the structure of the filter depends upon the syntax recognized by the source database. Another way to filter data in Reporting Services is to apply a filter to a dataset, data region, or a group. Using this latter method, you can even apply multiple filters. However, the use of filter operators or the setup of multiple filters is not always obvious, so in this series of posts, I'll provide some more information about the configuration of filters. First, why not use query parameters exclusively for filtering? Here are a few reasons: You might want to apply a filter to part of the report, but not all of the report. Your dataset might retrieve data from a stored procedure, and doesn't allow you to pass a query parameter for filtering purposes. Your report might be set up as a snapshot on the report server and, in that case, cannot be dynamically filtered based on a query parameter. Next, let's look at how to set up a report filter in general. The process is the same whether you are applying the filter to a dataset, data region, or a group. When you go to the Filters page in the Properties dialog box for whichever of these items you selected (dataset, data region, group), you click the Add button to create a new filter. The interface looks like this: The Expression field is usually a field in the dataset, so to make it easier for you to make a selection,the drop-down list displays all of the current dataset fields. But notice the expression button to the right, which means that you can set up any type of expression-not just a dataset field. To the right of the expression button, you'll find a data type drop-down list. It's important to specify the correct data type for the field or expression you're using. Now for the operators. Here's a list of the options that you have: This Operator Performs This Action =, <>, >, >=, <, <=, Like Compares expression to value Top N, Bottom N Compares expression to Top (Bottom) set of N values (N = integer) Top %, Bottom % Compares expression to Top (Bottom) N percent of values (N = integer or float) Between Determines whether expression is between two values, inclusive In Determines whether expression is found in list of values Last, the Value is what you're comparing to the expression using the operator. The construction of a filter using some operators (=, <>, >, etc.) is fairly simple. If my dataset (for AdventureWorks data) has a Category field, and I have a parameter that prompts the user for a single category, I can set up a filter like this: Expression Data Type Operator Value [Category] Text = [@Category] But if I set the parameter to accept multiple values, I need to change the operator from = to In, just as I would have to do if I were using a query parameter. The parameter expression, [@Category], which translates to =Parameters!Category.Value, doesn’t need to change because it represents an array as soon as I change the parameter to allow multiple values. The “In” operator requires an array. With that in mind, let’s consider a variation on Value. Let’s say that I have a parameter that prompts the user for a particular year – and for simplicity’s sake, this parameter only allows a single value, and I have an expression that evaluates the previous year based on the user’s selection. Then I want to use these two values in two separate filters with an OR condition. That is, I want to filter either by the year selected OR by the year that was computed. If I create two filters, one for each year (as shown below), then the report will only display results if BOTH filter conditions are met – which would never be true. Expression Data Type Operator Value [CalendarYear] Integer = [@Year] [CalendarYear] Integer = =Parameters!Year.Value-1 To handle this scenario, we need to create a single filter that uses the “In” operator, and then set up the Value expression as an array. To create an array, we use the Split function after creating a string that concatenates the two values (highlighted in yellow) as shown below. Expression Data Type Operator Value =Cstr(Fields!CalendarYear.Value) Text In =Split( CStr(Parameters!Year.Value) + ”,” + CStr(Parameters!Year.Value-1) , “,”) Note that in this case, I had to apply a string conversion on the year integer so that I could concatenate the parameter selection with the calculated year. Pay attention to the second argument of the Split function—you must use a comma delimiter for the result to work correctly with the In operator. I also had to change the Expression value from [CalendarYear] (or =Fields!CalendarYear.Value) so that the expression would return a string that I could compare with the values in the string array. More fun with filter expressions in future posts!

  Read the article

• Delving into design patterns, and what that means for the Oracle user experience

  - by Kathy.Miedema

  By Kathy Miedema, Oracle Applications User Experience George Hackman, Senior Director, Applications User Experiences The Oracle Applications User Experience team has some exciting things happening around Fusion Applications design patterns. Because we’re hoping to have some new offerings soon (stay tuned with VoX to see what’s in the pipeline around Fusion Applications design patterns), now is a good time to talk more about what design patterns can do for the individual user as well as the entire company. George Hackman, Senior Director of Operations User Experience, says the first thing to note is that user experience is not just about the user interface. It’s about understanding how people do things, observing them, and then finding the patterns that emerge. The Applications UX team develops those patterns and then builds them into Oracle applications. What emerges, Hackman says, is a consistent, efficient user experience that promotes a productive workplace. Creating design patterns What is a design pattern in the context of enterprise software? “Every day, people use technology to get things done,” Hackman says. “They navigate a virtual world that reaches from enterprise to consumer apps, and from desktop to mobile. This virtual world is constantly under construction. New areas are being developed and old areas are being redone. As this world is being built and remodeled, efficient pathways and practices emerge. “Oracle's user experience team watches users navigate this world. We measure their productivity and ask them about their satisfaction. We take the most efficient, most productive pathways from the enterprise and consumer world and turn them into Oracle's user experience patterns.” Hackman describes the process as combining all of the best practices from every part of a user’s world. Members of the user experience team observe, analyze, design, prototype, and measure each work task to find the best possible pattern for a particular work flow. As the team builds the patterns, “we make sure they are fully buildable using Oracle technology,” Hackman said. “So customers know they can use these patterns. There’s no need to make something up from scratch, not knowing whether you can even build it.” Hackman says that creating something on a computer is a good example of a user experience pattern. “People are creating things all the time,” he says. “On the consumer side, they are creating documents. On the enterprise side, they are creating expense reports. On a mobile phone, they are creating contacts. They are using different apps like iPhone or Facebook or Gmail or Oracle software, all doing this creation process.” The Applications UX team starts their process by observing how people might create something. “We observe people creating things. We see the patterns, we analyze and document, then we apply them to our products. It might be different from phone to web browser, but we have these design patterns that create a consistent experience across platforms, and across products, too. The result for customers Oracle constantly improves its part of the virtual world, Hackman said. New products are created and existing products are upgraded. Because Oracle builds user experience design patterns, Oracle's virtual world becomes both more powerful and more familiar at the same time. Because of design patterns, users can navigate with ease as they embrace the latest technology – because it behaves the way they expect it to. This means less training and faster adoption for individual users, and more productivity for the business as a whole. Hackman said Oracle gives customers and partners access to design patterns so that they can build in the virtual world using the same best practices. Customers and partners can extend applications with a user experience that is comfortable and familiar to their users. For businesses that are integrating different Oracle applications, design patterns are key. The user experience created in E-Business Suite should be similar to the user experience in Fusion Applications, Hackman said. If a user is transitioning from one application to the other, it shouldn’t be difficult for them to do their work. With design patterns, it isn’t. “Oracle user experience patterns are the building blocks for the virtual world that ensure productivity, consistency and user satisfaction,” Hackman said. “They are built for the enterprise, but incorporate the best practices from across the virtual world. They empower productivity and facilitate social interaction. When you build with patterns, you get all the end-user benefits of less training / retraining from the finished product. You also get faster / cheaper development.” What’s coming? You can already access design patterns to help you build Dashboards with OBIEE here. And we promised you at the beginning that we had something in the pipeline on Fusion Applications design patterns. Look for the announcement about when they are available here on VoX.

  Read the article

• Adventures in Windows 8: Understanding and debugging design time data in Expression Blend

  - by Laurent Bugnion

  One of my favorite features in Expression Blend is the ability to attach a Visual Studio debugger to Blend. First let’s start by answering the question: why exactly do you want to do that? Note: If you are familiar with the creation and usage of design time data, feel free to scroll down to the paragraph titled “When design time data fails”. Creating design time data for your app When a designer works on an app, he needs to see something to design. For “static” UI such as buttons, backgrounds, etc, the user interface elements are going to show up in Blend just fine. If however the data is fetched dynamically from a service (web, database, etc) or created dynamically, most probably Blend is going to show just an empty element. The classical way to design at that stage is to run the application, navigate to the screen that is under construction (which can involve delays, need to log in, etc…), to measure what is on the screen (colors, margins, width and height, etc) using various tools, going back to Blend, editing the properties of the elements, running again, etc. Obviously this is not ideal. The solution is to create design time data. For more information about the creation of design time data by mocking services, you can refer to two talks of mine “Deep dive MVVM” and “MVVM Applied From Silverlight to Windows Phone to Windows 8”. The source code for these talks is here and here. Design time data in MVVM Light One of the main reasons why I developed MVVM Light is to facilitate the creation of design time data. To illustrate this, let’s create a new MVVM Light application in Visual Studio. Install MVVM Light from here: http://mvvmlight.codeplex.com (use the MSI in the Download section). After installing, make sure to read the Readme that opens up in your favorite browser, you will need one more step to install the Project Templates. Start Visual Studio 2012. Create a new MvvmLight (Win8) app. Run the application. You will see a string showing “Welcome to MVVM Light”. In the Solution explorer, right click on MainPage.xaml and select Open in Blend. Now you should see “Welcome to MVVM Light [Design]” What happens here is that Expression Blend runs different code at design time than the application runs at runtime. To do this, we use design-time detection (as explained in a previous article) and use that information to initialize a different data service at design time. To understand this better, open the ViewModelLocator.cs file in the ViewModel folder and see how the DesignDataService is used at design time, while the DataService is used at runtime. In a real-life applicationm, DataService would be used to connect to a web service, for instance. When design time data fails Sometimes however, the creation of design time data fails. It can be very difficult to understand exactly what is happening. Expression Blend is not giving a lot of information about what happened. Thankfully, we can use a trick: Attaching a debugger to Expression Blend and debug the design time code. In WPF and Silverlight (including Windows Phone 7), you could simply attach the debugger to Blend.exe (using the “Managed (v4.5, v4.0) code” option even for Silverlight!!) In Windows 8 however, things are just a bit different. This is because the designer that renders the actual representation of the Windows 8 app runs in its own process. Let’s illustrate that: Open the file DesignDataService in the Design folder. Modify the GetData method to look like this: public void GetData(Action<DataItem, Exception> callback) { throw new Exception(); // Use this to create design time data var item = new DataItem("Welcome to MVVM Light [design]"); callback(item, null); } Go to Blend and build the application. The build succeeds, but now the page is empty. The creation of the design time data failed, but we don’t get a warning message. We need to investigate what’s wrong. Close MainPage.xaml Go to Visual Studio and select the menu Debug, Attach to Process. Update: Make sure that you select “Managed (v4.5, v4.0) code” in the “Attach to” field. Find the process named XDesProc.exe. You should have at least two, one for the Visual Studio 2012 designer surface, and one for Expression Blend. Unfortunately in this screen it is not obvious which is which. Let’s find out in the Task Manager. Press Ctrl-Alt-Del and select Task Manager Go to the Details tab and sort the processes by name. Find the one that says “Blend for Microsoft Visual Studio 2012 XAML UI Designer” and write down the process ID. Go back to the Attach to Process dialog in Visual Studio. sort the processes by ID and attach the debugger to the correct instance of XDesProc.exe. Open the MainViewModel (in the ViewModel folder) Place a breakpoint on the first line of the MainViewModel constructor. Go to Blend and open the MainPage.xaml again. At this point, the debugger breaks in Visual Studio and you can execute your code step by step. Simply step inside the dataservice call, and find the exception that you had placed there. Visual Studio gives you additional information which helps you to solve the issue. More info and Conclusion I want to thank the amazing people on the Expression Blend team for being very fast in guiding me in that matter and encouraging me to blog about it. More information about the XDesProc.exe process can be found here. I had to work on a Windows 8 app for a few days without design time data because of an Exception thrown somewhere in the code, and it was really painful. With the debugger, finding the issue was a simple matter of stepping into the code until it threw the exception.   Laurent Bugnion (GalaSoft) Subscribe | Twitter | Facebook | Flickr | LinkedIn

  Read the article

• Extreme Optimization – Numerical Algorithm Support

  - by JoshReuben

  Function Delegates Many calculations involve the repeated evaluation of one or more user-supplied functions eg Numerical integration. The EO MathLib provides delegate types for common function signatures and the FunctionFactory class can generate new delegates from existing ones. RealFunction delegate - takes one Double parameter – can encapsulate most of the static methods of the System.Math class, as well as the classes in the Extreme.Mathematics.SpecialFunctions namespace: var sin = new RealFunction(Math.Sin); var result = sin(1); BivariateRealFunction delegate - takes two Double parameters: var atan2 = new BivariateRealFunction (Math.Atan2); var result = atan2(1, 2); TrivariateRealFunction delegate – represents a function takes three Double arguments ParameterizedRealFunction delegate - represents a function taking one Integer and one Double argument that returns a real number. The Pow method implements such a function, but the arguments need order re-arrangement: static double Power(int exponent, double x) { return ElementaryFunctions.Pow(x, exponent); } ... var power = new ParameterizedRealFunction(Power); var result = power(6, 3.2); A ComplexFunction delegate - represents a function that takes an Extreme.Mathematics.DoubleComplex argument and also returns a complex number. MultivariateRealFunction delegate - represents a function that takes an Extreme.Mathematics.LinearAlgebra.Vector argument and returns a real number. MultivariateVectorFunction delegate - represents a function that takes a Vector argument and returns a Vector. FastMultivariateVectorFunction delegate - represents a function that takes an input Vector argument and an output Matrix argument – avoiding object construction  The FunctionFactory class RealFromBivariateRealFunction and RealFromParameterizedRealFunction helper methods - transform BivariateRealFunction or a ParameterizedRealFunction into a RealFunction delegate by fixing one of the arguments, and treating this as a new function of a single argument. var tenthPower = FunctionFactory.RealFromParameterizedRealFunction(power, 10); var result = tenthPower(x); Note: There is no direct way to do this programmatically in C# - in F# you have partial value functions where you supply a subset of the arguments (as a travelling closure) that the function expects. When you omit arguments, F# generates a new function that holds onto/remembers the arguments you passed in and "waits" for the other parameters to be supplied. let sumVals x y = x + y     let sumX = sumVals 10     // Note: no 2nd param supplied.     // sumX is a new function generated from partially applied sumVals.     // ie "sumX is a partial application of sumVals." let sum = sumX 20     // Invokes sumX, passing in expected int (parameter y from original)  val sumVals : int -> int -> int val sumX : (int -> int) val sum : int = 30 RealFunctionsToVectorFunction and RealFunctionsToFastVectorFunction helper methods - combines an array of delegates returning a real number or a vector into vector or matrix functions. The resulting vector function returns a vector whose components are the function values of the delegates in the array. var funcVector = FunctionFactory.RealFunctionsToVectorFunction(     new MultivariateRealFunction(myFunc1),     new MultivariateRealFunction(myFunc2));  The IterativeAlgorithm<T> abstract base class Iterative algorithms are common in numerical computing - a method is executed repeatedly until a certain condition is reached, approximating the result of a calculation with increasing accuracy until a certain threshold is reached. If the desired accuracy is achieved, the algorithm is said to converge. This base class is derived by many classes in the Extreme.Mathematics.EquationSolvers and Extreme.Mathematics.Optimization namespaces, as well as the ManagedIterativeAlgorithm class which contains a driver method that manages the iteration process.  The ConvergenceTest abstract base class This class is used to specify algorithm Termination , convergence and results - calculates an estimate for the error, and signals termination of the algorithm when the error is below a specified tolerance. Termination Criteria - specify the success condition as the difference between some quantity and its actual value is within a certain tolerance – 2 ways: absolute error - difference between the result and the actual value. relative error is the difference between the result and the actual value relative to the size of the result. Tolerance property - specify trade-off between accuracy and execution time. The lower the tolerance, the longer it will take for the algorithm to obtain a result within that tolerance. Most algorithms in the EO NumLib have a default value of MachineConstants.SqrtEpsilon - gives slightly less than 8 digits of accuracy. ConvergenceCriterion property - specify under what condition the algorithm is assumed to converge. Using the ConvergenceCriterion enum: WithinAbsoluteTolerance / WithinRelativeTolerance / WithinAnyTolerance / NumberOfIterations Active property - selectively ignore certain convergence tests Error property - returns the estimated error after a run MaxIterations / MaxEvaluations properties - Other Termination Criteria - If the algorithm cannot achieve the desired accuracy, the algorithm still has to end – according to an absolute boundary. Status property - indicates how the algorithm terminated - the AlgorithmStatus enum values:NoResult / Busy / Converged (ended normally - The desired accuracy has been achieved) / IterationLimitExceeded / EvaluationLimitExceeded / RoundOffError / BadFunction / Divergent / ConvergedToFalseSolution. After the iteration terminates, the Status should be inspected to verify that the algorithm terminated normally. Alternatively, you can set the ThrowExceptionOnFailure to true. Result property - returns the result of the algorithm. This property contains the best available estimate, even if the desired accuracy was not obtained. IterationsNeeded / EvaluationsNeeded properties - returns the number of iterations required to obtain the result, number of function evaluations.  Concrete Types of Convergence Test classes SimpleConvergenceTest class - test if a value is close to zero or very small compared to another value. VectorConvergenceTest class - test convergence of vectors. This class has two additional properties. The Norm property specifies which norm is to be used when calculating the size of the vector - the VectorConvergenceNorm enum values: EuclidianNorm / Maximum / SumOfAbsoluteValues. The ErrorMeasure property specifies how the error is to be measured – VectorConvergenceErrorMeasure enum values: Norm / Componentwise ConvergenceTestCollection class - represent a combination of tests. The Quantifier property is a ConvergenceTestQuantifier enum that specifies how the tests in the collection are to be combined: Any / All  The AlgorithmHelper Class inherits from IterativeAlgorithm<T> and exposes two methods for convergence testing. IsValueWithinTolerance<T> method - determines whether a value is close to another value to within an algorithm's requested tolerance. IsIntervalWithinTolerance<T> method - determines whether an interval is within an algorithm's requested tolerance.

  Read the article

• Using a Predicate as a key to a Dictionary

  - by Tom Hines

  I really love Linq and Lambda Expressions in C#.  I also love certain community forums and programming websites like DaniWeb. A user on DaniWeb posted a question about comparing the results of a game that is like poker (5-card stud), but is played with dice. The question stemmed around determining what was the winning hand.  I looked at the question and issued some comments and suggestions toward a potential answer, but I thought it was a neat homework exercise. [A little explanation] I eventually realized not only could I compare the results of the hands (by name) with a certain construct – I could also compare the values of the individual dice with the same construct. That piece of code eventually became a Dictionary with the KEY as a Predicate<int> and the Value a Func<T> that returns a string from the another structure that contains the mapping of an ENUM to a string.  In one instance, that string is the name of the hand and in another instance, it is a string (CSV) representation of of the digits in the hand. An added benefit is that the digits re returned in the order they would be for a proper poker hand.  For instance the hand 1,2,5,3,1 would be returned as ONE_PAIR (1,1,5,3,2). [Getting to the point] 1: using System; 2: using System.Collections.Generic; 3:   4: namespace DicePoker 5: { 6: using KVP_E2S = KeyValuePair<CDicePoker.E_DICE_POKER_HAND_VAL, string>; 7: public partial class CDicePoker 8: { 9: /// <summary> 10: /// Magical construction to determine the winner of given hand Key/Value. 11: /// </summary> 12: private static Dictionary<Predicate<int>, Func<List<KVP_E2S>, string>> 13: map_prd2fn = new Dictionary<Predicate<int>, Func<List<KVP_E2S>, string>> 14: { 15: {new Predicate<int>(i => i.Equals(0)), PlayerTie},//first tie 16:   17: {new Predicate<int>(i => i > 0), 18: (m => string.Format("Player One wins\n1={0}({1})\n2={2}({3})", 19: m[0].Key, m[0].Value, m[1].Key, m[1].Value))}, 20:   21: {new Predicate<int>(i => i < 0), 22: (m => string.Format("Player Two wins\n2={2}({3})\n1={0}({1})", 23: m[0].Key, m[0].Value, m[1].Key, m[1].Value))}, 24:   25: {new Predicate<int>(i => i.Equals(0)), 26: (m => string.Format("Tie({0}) \n1={1}\n2={2}", 27: m[0].Key, m[0].Value, m[1].Value))} 28: }; 29: } 30: } When this is called, the code calls the Invoke method of the predicate to return a bool.  The first on matching true will have its value invoked. 1: private static Func<DICE_HAND, E_DICE_POKER_HAND_VAL> GetHandEval = dh => 2: map_dph2fn[map_dph2fn.Keys.Where(enm2fn => enm2fn(dh)).First()]; After coming up with this process, I realized (with a little modification) it could be called to evaluate the individual values in the dice hand in the event of a tie. 1: private static Func<List<KVP_E2S>, string> PlayerTie = lst_kvp => 2: map_prd2fn.Skip(1) 3: .Where(x => x.Key.Invoke(RenderDigits(dhPlayerOne).CompareTo(RenderDigits(dhPlayerTwo)))) 4: .Select(s => s.Value) 5: .First().Invoke(lst_kvp); After that, I realized I could now create a program completely without “if” statements or “for” loops! 1: static void Main(string[] args) 2: { 3: Dictionary<Predicate<int>, Action<Action<string>>> main = new Dictionary<Predicate<int>, Action<Action<string>>> 4: { 5: {(i => i.Equals(0)), PlayGame}, 6: {(i => true), Usage} 7: }; 8:   9: main[main.Keys.Where(m => m.Invoke(args.Length)).First()].Invoke(Display); 10: } …and there you have it. :) ZIPPED Project

  Read the article

• C#/.NET Little Wonders &ndash; Cross Calling Constructors

  - by James Michael Hare

  Just a small post today, it’s the final iteration before our release and things are crazy here!  This is another little tidbit that I love using, and it should be fairly common knowledge, yet I’ve noticed many times that less experienced developers tend to have redundant constructor code when they overload their constructors. The Problem – repetitive code is less maintainable Let’s say you were designing a messaging system, and so you want to create a class to represent the properties for a Receiver, so perhaps you design a ReceiverProperties class to represent this collection of properties. Perhaps, you decide to make ReceiverProperties immutable, and so you have several constructors that you can use for alternative construction: 1: // Constructs a set of receiver properties. 2: public ReceiverProperties(ReceiverType receiverType, string source, bool isDurable, bool isBuffered) 3: { 4: ReceiverType = receiverType; 5: Source = source; 6: IsDurable = isDurable; 7: IsBuffered = isBuffered; 8: } 9: 10: // Constructs a set of receiver properties with buffering on by default. 11: public ReceiverProperties(ReceiverType receiverType, string source, bool isDurable) 12: { 13: ReceiverType = receiverType; 14: Source = source; 15: IsDurable = isDurable; 16: IsBuffered = true; 17: } 18:  19: // Constructs a set of receiver properties with buffering on and durability off. 20: public ReceiverProperties(ReceiverType receiverType, string source) 21: { 22: ReceiverType = receiverType; 23: Source = source; 24: IsDurable = false; 25: IsBuffered = true; 26: } Note: keep in mind this is just a simple example for illustration, and in same cases default parameters can also help clean this up, but they have issues of their own. While strictly speaking, there is nothing wrong with this code, logically, it suffers from maintainability flaws.  Consider what happens if you add a new property to the class?  You have to remember to guarantee that it is set appropriately in every constructor call. This can cause subtle bugs and becomes even uglier when the constructors do more complex logic, error handling, or there are numerous potential overloads (especially if you can’t easily see them all on one screen’s height). The Solution – cross-calling constructors I’d wager nearly everyone knows how to call your base class’s constructor, but you can also cross-call to one of the constructors in the same class by using the this keyword in the same way you use base to call a base constructor. 1: // Constructs a set of receiver properties. 2: public ReceiverProperties(ReceiverType receiverType, string source, bool isDurable, bool isBuffered) 3: { 4: ReceiverType = receiverType; 5: Source = source; 6: IsDurable = isDurable; 7: IsBuffered = isBuffered; 8: } 9: 10: // Constructs a set of receiver properties with buffering on by default. 11: public ReceiverProperties(ReceiverType receiverType, string source, bool isDurable) 12: : this(receiverType, source, isDurable, true) 13: { 14: } 15:  16: // Constructs a set of receiver properties with buffering on and durability off. 17: public ReceiverProperties(ReceiverType receiverType, string source) 18: : this(receiverType, source, false, true) 19: { 20: } Notice, there is much less code.  In addition, the code you have has no repetitive logic.  You can define the main constructor that takes all arguments, and the remaining constructors with defaults simply cross-call the main constructor, passing in the defaults. Yes, in some cases default parameters can ease some of this for you, but default parameters only work for compile-time constants (null, string and number literals).  For example, if you were creating a TradingDataAdapter that relied on an implementation of ITradingDao which is the data access object to retreive records from the database, you might want two constructors: one that takes an ITradingDao reference, and a default constructor which constructs a specific ITradingDao for ease of use: 1: public TradingDataAdapter(ITradingDao dao) 2: { 3: _tradingDao = dao; 4:  5: // other constructor logic 6: } 7:  8: public TradingDataAdapter() 9: { 10: _tradingDao = new SqlTradingDao(); 11:  12: // same constructor logic as above 13: }   As you can see, this isn’t something we can solve with a default parameter, but we could with cross-calling constructors: 1: public TradingDataAdapter(ITradingDao dao) 2: { 3: _tradingDao = dao; 4:  5: // other constructor logic 6: } 7:  8: public TradingDataAdapter() 9: : this(new SqlTradingDao()) 10: { 11: }   So in cases like this where you have constructors with non compiler-time constant defaults, default parameters can’t help you and cross-calling constructors is one of your best options. Summary When you have just one constructor doing the job of initializing the class, you can consolidate all your logic and error-handling in one place, thus ensuring that your behavior will be consistent across the constructor calls. This makes the code more maintainable and even easier to read.  There will be some cases where cross-calling constructors may be sub-optimal or not possible (if, for example, the overloaded constructors take completely different types and are not just “defaulting” behaviors). You can also use default parameters, of course, but default parameter behavior in a class hierarchy can be problematic (default values are not inherited and in fact can differ) so sometimes multiple constructors are actually preferable. Regardless of why you may need to have multiple constructors, consider cross-calling where you can to reduce redundant logic and clean up the code.   Technorati Tags: C#,.NET,Little Wonders

  Read the article

• Azure Mobile Services: available modules

  - by svdoever

  Azure Mobile Services has documented a set of objects available in your Azure Mobile Services server side scripts at their documentation page Mobile Services server script reference. Although the documented list is a nice list of objects for the common things you want to do, it will be sooner than later that you will look for more functionality to be included in your script, especially with the new provided feature that you can now create your custom API’s. If you use GIT it is now possible to add any NPM module (node package manager module, say the NuGet of the node world), but why include a module if it is already available out of the box. And you can only use GIT with Azure Mobile Services if you are an administrator on your Azure Mobile Service, not if you are a co-administrator (will be solved in the future). Until now I did some trial and error experimentation to test if a certain module was available. This is easiest to do as follows:   Create a custom API, for example named experiment. In this API use the following code: exports.get = function (request, response) { var module = "nonexistingmodule"; var m = require(module); response.send(200, "Module '%s' found.", module); }; You can now test your service with the following request in your browser: https://yourservice.azure-mobile.net/api/experiment If you get the result: {"code":500,"error":"Error: Internal Server Error"} you know that the module does not exist. In your logs you will find the following error: Error in script '/api/experiment.json'. Error: Cannot find module 'nonexistingmodule' [external code] atC:\DWASFiles\Sites\yourservice\VirtualDirectory0\site\wwwroot\App_Data\config\scripts\api\experiment.js:3:13[external code] If you require an existing (undocumented) module like the OAuth module in the following code, you will get success as a result: exports.get = function (request, response) { var module = "oauth"; var m = require(module); response.send(200, "Module '" + module + "' found."); }; If we look at the standard node.js documentation we see an extensive list of modules that can be used from your code. If we look at the list of files available in the Azure Mobile Services platform as documented in the blog post Azure Mobile Services: what files does it consist of? we see a folder node_modules with many more modules are used to build the Azure Mobile Services functionality on, but that can also be utilized from your server side node script code: apn - An interface to the Apple Push Notification service for Node.js. dpush - Send push notifications to Android devices using GCM. mpns - A Node.js interface to the Microsoft Push Notification Service (MPNS) for Windows Phone. wns - Send push notifications to Windows 8 devices using WNS. pusher - Node library for the Pusher server API (see also: http://pusher.com/) azure - Windows Azure Client Library for node. express - Sinatra inspired web development framework. oauth - Library for interacting with OAuth 1.0, 1.0A, 2 and Echo. Provides simplified client access and allows for construction of more complex apis and OAuth providers. request - Simplified HTTP request client. sax - An evented streaming XML parser in JavaScript sendgrid - A NodeJS implementation of the SendGrid Api. sqlserver – In node repository known as msnodesql - Microsoft Driver for Node.js for SQL Server. tripwire - Break out from scripts blocking node.js event loop. underscore - JavaScript's functional programming helper library. underscore.string - String manipulation extensions for Underscore.js javascript library. xml2js - Simple XML to JavaScript object converter. xmlbuilder - An XML builder for node.js. As stated before, many of these modules are used to provide the functionality of Azure Mobile Services platform, and in general should not be used directly. On the other hand, I needed OAuth badly to authenticate to the new v1.1 services of Twitter, and was very happy that a require('oauth') and a few lines of code did the job. Based on the above modules and a lot of code in the other javascript files in the Azure Mobile Services platform a set of global objects is provided that can be used from your server side node.js script code. In future blog posts I will go into more details with respect to how this code is built-up, all starting at the node.js express entry point app.js.

  Read the article

• obiee 10g teradata Solaris deployment

  - by user554629

  I have 3-4 years worth of notes on proper Teradata deployment across multiple operating systems.   The topic that is too large to cover succinctly in a blog entry.   I'm trying something new:  document a specific situation, consolidate the facts, document diagnostic procedures and then clone the structure to cover other obiee deployments (11g and other operating systems). Until the icon below is removed, this blog entry may be revised frequently.  No construction between June 6th through June 25th. Getting started obiee 10g certification:  pg 24-25 Teradata V2R5.1.x - V2R6.2, Client 13.10, certified 10.1.3.4.1obiee 10g documentation: Deployment Guide, Server Administration, Install/Config Guideobiee overview: teradata connectivity downloads: ( requires registration )solaris odbc drivers: sparc 13.10:  Choose 13.10.00.04  ( ReadMe ) sparc 14.00: probably would work, but not certified by Oracle on 10g I assume you have obiee 10.1.3.4.1 installed; 10.1.3.4.2 would be a better choice. Teradata odbc install requires root for Solaris pkgadd Only 1 version of Teradata odbc can be installed.symbolic links to the current version are created in /usr/lib at install obiee implementation background database access has two types of implementation:  native and odbcnative drivers use DB vendor client interfaces for accessodbc drivers are provided by the DB vendor for DB accessTeradata is an odbc interface Database. odbc drivers require an ODBC Driver Managerobiee uses Merant Data Direct driver manager obiee servers communicate with one another using odbc.The internal odbc driver is implemented by the obiee team and requires Merant Driver Manager. Teradata supplies a Driver Manager, which is built by Merant, but should not be used in obiee. The nqsserver shared library deployment looks like this  OBIEE Server<->DataDirect Manager<->Teradata Driver<->Teradata Database nqsserver startup $ cd $BI/setup$ . ./sa-init64.sh$ run-sa.sh autorestart64 The following files are referenced from setup:  .variant.sh  user.sh  NQSConfig.INI  DBFeatures.INI  $ODBCINI ( odbc.ini )  sqlnet.ora How does nqsserver connect to Teradata? A teradata DSN is created in the RPD. ( TD71 )setup/odbc.ini contains: [ODBC Data Sources] TD71=tdata.so[TD71]Driver=/opt/tdodbc/odbc/drivers/tdata.soDescription=Teradata V7.1.0DBCName=###.##.##.### LastUser=Username=northwindPassword=northwindDatabase=DefaultDatabase=northwind setup/user.sh contains LIBPATH\=/opt/tdicu/lib_64\:/usr/odbc/lib\:/usr/odbc/drivers\:/usr/lpp/tdodbc/odbc/drivers\:$LIBPATHexport LIBPATH   setup/.variant.sh contains if [ "$ANA_SERVER_64" = "1" ]; then  ANA_BIN_DIR=${SAROOTDIR}/server/Bin64  ANA_WEB_DIR=${SAROOTDIR}/web/bin64  ANA_ODBC_DIR=${SAROOTDIR}/odbc/lib64         setup/sa-run.sh  contains . ${ANA_INSTALL_DIR}/setup/.variant.sh. ${ANA_INSTALL_DIR}/setup/user.sh logfile="${SAROOTDIR}/server/Log/nqsserver.out.log"${ANA_BIN_DIR}/nqsserver -quiet >> ${logfile} 2>&1 &   nqsserver is running: nqsserver produces $BI/server/nqsserver.logAt startup, the native database drivers connect and record DB versions.tdata.so is not loaded until a Teradata DB connection is attempted.    Teradata odbc client installation Accept all the defaults for pkgadd.   Install in /opt. $ mkdir odbc$ cd odbc$ gzip -dc ../tdodbc__solaris_sparc.13.10.00.04.tar.gz | tar -xf - $ sudo su# pkgadd -d . TeraGSS# pkgadd -d . tdicu1310# pkgadd -d . tdodbc1310   Directory Notes: /opt/teradata/client/13.10/odbc_64/lib/tdata.soThe 64-bit obiee library loaded by nqsserver. /opt/teradata/client/13.10/odbc_64/lib is not needed in LD_LIBRARY_PATH /opt/teradata/client/13.10/tdicu/lib64is needed in LD_LIBRARY_PATH /usr/odbc should not be referenced;  it is a link to 32-bit libraries LD_LIBRARY_PATH_64 should not be used.     Useful bash functions and aliases export SAROOTDIR=/export/home/dw_adm/OracleBIexport TERA_HOME=/opt/teradata/client/13.10 export ORACLE_HOME=/export/home/oracle/product/10.2.0/clientexport ODBCINI=$SAROOTDIR/setup/odbc.iniexport TD_ICU_DATA=$TERA_HOME/tdicu/lib64alias cds="alias | grep '^alias cd' | sed 's/^alias //' | sort"alias cdtd="cd $TERA_HOME; ls" alias cdtdodbc="cd $TERA_HOME/odbc_64; ls -l"alias cdtdicu="cd $TERA_HOME/tdicu/lib64; ls -l"alias cdbi="cd $SAROOTDIR; ls"alias cdbiodbc="cd $SAROOTDIR/odbc; ls -l"alias cdsetup="cd $SAROOTDIR/setup; ls -ltr"alias cdsvr="cd $SAROOTDIR/server; ls"alias cdrep="cd $SAROOTDIR/server/Repository; ls -ltr"alias cdsvrcfg="cd $SAROOTDIR/server/Config; ls -ltr"alias cdsvrlog="cd $SAROOTDIR/server/Log; ls -ltr"alias cdweb="cd $SAROOTDIR/web; ls"alias cdwebconfig="cd $SAROOTDIR/web/config; ls -ltr"alias cdoci="cd $ORACLE_HOME; ls"pkgfiles() { pkgchk -l $1 | awk  '/^Pathname/ {print $2}'; }pkgfind()  { pkginfo | egrep -i $1 ; } Examples: $ pkgfind td$ pkgfiles tdodbc1310 | grep 64$ cds$ cdtdodbc$ cdsetup$ cdsvrlog$ cdweblog

  Read the article

• BizTalk: Sample: Context routing and Throttling with orchestration

  - by Leonid Ganeline

  The sample demonstrates using orchestration for throttling and using context routing. Usually throttling is implemented on the host level (in BizTalk 2010 we can also using the host instance level throttling). Here is demonstrated the throttling with orchestration convoy that slows down message flow from some customers. Sample implements sort of quality service agreement layer for different kind of customers. The sample demonstrates the context routing between orchestrations. It has several advantages over the content routing. For example, we don’t have to create the property schema and promote properties on the schemas; we don’t have to change the message content to change routing. Use case:  The BizTalk application has a main processing orchestration that process all input messages. The application usually works as an OLTP application. Input messages came in random order without peaks, typical scenario for the on-line users. But sometimes the big data batch payloads come. These batches overload processing orchestrations. All processes, activated by on-line users after the payload, come to the same queue and are processed only after the payload. Result is on-line users can see significant delay in processing. It can be minutes or hours, depending of the batch size. Requirements: On-line user’s processing should work without delays. Big batches cannot disturb on-line users. There should be higher priority for the on-line users and the lower priority for the batches. Design: Decision is to divide the message flow in two branches, one for on-line users and second for batches. Branch with batches provides messages to the processing line with low priority, and the on-line user’s branch – with high priority. All messages are provided by hi-speed receive port. BTS.ReceivePortName context property is used for routing. The Router orchestration separates messages sent from on-line users and from the batch messages. But the Router does not use the BizTalk provided value of this property, the Router set up this value by itself. Router uses the content of the messages to decide if it is from on-line users or from batches. The message context property the BTS.ReceivePortName is changed respectively, its value works as a recipient address, as the “To” address for the next recipient orchestrations. Those next orchestrations are the BatchBottleneck and the MainProcess orchestrations. Messages with context equal “ToBatch” are filtered up by the BatchBottleneck orchestration. It is a unified convoy orchestration and it throttles the message flow, delaying the message delivery to the MainProcess orchestration. The BatchBottleneck orchestration changes the message context to the “ToProcess” and sends messages one after another with small delay in between. Delay can be configured in the BizTalk config file as:                 <appSettings>                                 <add key="GLD_Tests_TwoWayRouting_BatchBottleneck_DelayMillisec" value="100"/>                 </appSettings>   Of course, messages with context equal “ToProcess” are filtered up by the MainProcess orchestration.   NOTES: Filters with string values: In Orchestrations (the first Receive shape in orchestration) use string values WITH quotes; in Send Ports use string values WITHOUT quotes. Filters on the Send Ports are dynamic; we can change them in run-time. Filters on the Orchestrations are static; we can change them only in design-time. To check the existence of the promoted property inside orchestration use the Expression shape with construction like this:       if (BTS.ReceivePortName exists myMessage) { …; } It is not possible in the Message Assignment shape because using the “if” statement inside Message Assignment is prohibited. Several predefined context properties can behave in specific way. Say MessageTracking.OriginatingMessage or XMLNORM.DocumentSpecName, they are required some internal rules should be applied to the format or usage of this properties. MessageTracking.* parameters require you have to use tracking and you can get unexpected run-time errors in some cases. My recommendation is - use very limited set of the predefined context properties. To “attach” the new promoted property to the message, we have to use correlation. The correlation type should include this property. [Here is a good explanation by Saravana ] The sample code is here [sorry, temporary trubles with CodePlex].

  Read the article

• Context is Everything

  - by Angus Graham

  Normal 0 false false false EN-CA X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin-top:0cm; mso-para-margin-right:0cm; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0cm; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin;} Context is Everything How many times have you have you asked a question only to hear an answer like “Well, it depends. What exactly are you trying to do?”.  There are times that raw information can’t tell us what we need to know without putting it in a larger context. Let's take a real world example.  If I'm a maintenance planner trying to figure out which assets should be replaced during my next maintenance window, I'm going to go to my Asset Management System.  I can get it to spit out a list of assets that have failed several times over the last year.  But what are these assets connected to?  Is there any safety consequences to shutting off this pipeline to do the work?  Is some other work that's planned going to conflict with replacing this asset?  Several of these questions can't be answered by simply spitting out a list of asset IDs.  The maintenance planner will have to reference a diagram of the plant to answer several of these questions. This is precisely the idea behind Augmented Business Visualization. An Augmented Business Visualization (ABV) solution is one where your structured data (enterprise application data) and your unstructured data (documents, contracts, floor plans, designs, etc.) come together to allow you to make better decisions.  Essentially we're showing your business data into its context. AutoVue allows you to create ABV solutions by integrating your enterprise application with AutoVue’s hotspot framework. Hotspots can be defined for your document. Users can click these hotspots to trigger actions in your enterprise app. Similarly, the enterprise app can highlight the hotspots in your document based on its business data, creating a visual dashboard of your business data in the context of your document. ABV is not new. We introduced the hotspot framework in AutoVue 20.1 with text hotspots. Any text in a PDF or 2D CAD drawing could be turned into a hotspot. In 20.2 we have enhanced this to include 2 new types of hotspots: 3D and regional hotspots. 3D hotspots allow you to turn 3D parts into hotspots. Hotspots can be defined based on the attributes of the part, so you can create hotspots based on part numbers, material, date of delivery, etc.  Regional hotspots allow an administrator to define rectangular regions on any PDF, image, or 2D CAD drawing. This is perfect for cases where the document you’re using either doesn’t have text in it (a JPG or TIFF for example) or if you want to define hotspots that don’t correspond to the text in the document. There are lots of possible uses for AutoVue hotspots.  A great demonstration of how our hotspot capabilities can help add context to enterprise data in the Energy sector can be found in the following AutoVue movies: Maintenance Planning in the Energy Sector - Watch it Now Capital Construction Project Management in the Energy Sector  -  Watch it Now Commissioning and Handover Process for the Energy Sector  -  Watch it Now

  Read the article

• Lesi, from Graduate Trainee to Territory Manager

  - by Maria Sandu

  Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 It’s the final year, University is now coming to an end. A new chapter now awaits my arrival. This part of my life is called “Looking for a Job”. With no form of experience whatsoever, getting a job at a well renowned IT company is something that every IT student dreams about. CV: v, Application form: v, interviews: v. Acceptance Call, “Lesi I’m pleased to inform you that you have been accepted to be part of the Oracle Graduate Program for 2012”. Life would never again be the same. Being Part of the Graduate Program Going into the Graduate program, I felt like a baby seeing candy for the first time. The Program gave me the platform to not only break in to the workplace but also to help launch my career. Over the next 3 months, I went through various trainings / workshops / events / coaching / mentorship sessions. Like a construction worker building a solid foundation for a beautifully designed architecture, a clear path to build my career was set. With training out the way, it was now time to start working closely with my team. For the rest of the year, it was all about selling. Sales, Pipeline, Forecasting and numbers soon became the common words in my career. As the saying goes, “once a sales man, always a sales man”. There was no turning back now, a career in sales was the new hustle in my life. I worked closely with my mentor & coach (Ibrahim) who was heading up Zambia and Malawi. This was to be one of my best moments in the program as I started engaging with customers and getting some hands on experience in the field. By the end of the program all the experience, hard work, training and resources came in handy as I was now ready and fully groomed to be a sales rep. Life after the Graduate Program I’m proud to say that now I’m a Territory Manager, heading up Malawi, selling Technology, Middleware & Applications across all industries. I’m part of the Transition Cluster Team, a powerful team headed by the seasoned Senior Director. As a Territory Manager my role is to push for coverage, to penetrate the market by selling Oracle from end- to- end to all accounts in Malawi. I now spend my days living out of a suitcase, moving from hotel to hotel, chasing after business in all areas of Malawi. It’s the life of a Sales Man and I’m enjoying every minute of it. I’m truly fortunate and grateful to have been part of such a wonderful graduate program. I owe my Sales career to the graduate program, and I truly hope that the program will continue to develop and to groom new talent amongst the youth of this world. If you're interested in joining the Graduate Program in South Africa keep an eye on our CampusatOracle Facebook Page page to get the latest updates! /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;}

  Read the article

• drawing thick, textured lines in OpenGL

  - by NateS

  I need to draw thick textured line segments in OpenGL. Actually I need curves made out of short line segments. Here is what I have: In the upper left is an example of two connected line segments. The second image shows once the lines are given width, they overlap. If I apply a texture that uses translucency, the overlap looks terrible. The third image shows that both lines are shortened by half the amount necessary to make the thick line corners just touch. This way I can fill the space between the lines with a triangle. On the right you can see this works well (ignore the horizontal line when the crappy texture repeats). But it doesn't always work well. In the bottom left the curve is made of many short line segments. Note the incorrect texture application. My program is written in Java, making use of the LWJGL OpenGL binding (and minor use of Slick, a 2D helper framework). I've made a zip file that contains an executable JAR so you can easily see the problem. It also has the Java code (there is only one source file) and an Eclipse project, so you can instantly run it through Eclipse and hack at it if you like. Here she is: http://n4te.com/temp/lines.zip To run, execute "java -jar lines.jar". You may need "-Djava.library.path=." before -jar if you are not on Windows. Press space to toggle texture/wireframe. The wireframe only shows the line segments, the triangle between them isn't drawn. I don't need to draw arbitrary lines, just bezier curves similar to what you see in the program. Sorry the code is a bit messy, once I have a solution I will refactor. I have investigated using GLUtessellator. It greatly simplified construction of the line, but I found that applying the texture was perfect. It worked most of the time (top image below), but long vertical curves would have severe texture distortion (bottom image below): This turned out to be much easier to code, but in the end worse than my approach. I believe what I'm trying to do is called "line tessellation" or "stroke tessellation". I assume this has been solved already? Is there standard code I can leverage? Otherwise, how can I fix my code so that the texture does not freak out on short, vertical curves?

  Read the article

• why jQuery.parseJSON is not a function?

  - by Pandiya Chendur

  I use the following jquery statements and i am getting the error, jQuery.parseJSON is not a function my function is, function Iteratejsondata() {var HfJsonValue = { "Table": [{ "Emp_Id": "3", "Identity_No": "", "Emp_Name": "Jerome", "Address": "Madurai", "Date_Of_Birth": "", "Desig_Name": "Supervisior", "Desig_Description": "Supervisior of the Construction", "SalaryBasis": "Monthly", "FixedSalary": "25000.00" }, { "Emp_Id": "4", "Identity_No": "", "Emp_Name": "Mohan", "Address": "Madurai", "Date_Of_Birth": "", "Desig_Name": "Acc ", "Desig_Description": "Accountant", "SalaryBasis": "Monthly", "FixedSalary": "200.00" }, { "Emp_Id": "5", "Identity_No": "", "Emp_Name": "Murugan", "Address": "Madurai", "Date_Of_Birth": "", "Desig_Name": "Mason", "Desig_Description": "Mason", "SalaryBasis": "Weekly", "FixedSalary": "150.00" }, { "Emp_Id": "6", "Identity_No": "", "Emp_Name": "Ram", "Address": "Madurai", "Date_Of_Birth": "", "Desig_Name": "Mason", "Desig_Description": "Mason", "SalaryBasis": "Weekly", "FixedSalary": "120.00" }, { "Emp_Id": "7", "Identity_No": "", "Emp_Name": "Raja", "Address": "Madurai", "Date_Of_Birth": "", "Desig_Name": "Mason", "Desig_Description": "Mason", "SalaryBasis": "Weekly", "FixedSalary": "135.00" }, { "Emp_Id": "8", "Identity_No": "", "Emp_Name": "Raja kumar", "Address": "Madurai", "Date_Of_Birth": "", "Desig_Name": "Mason Helper", "Desig_Description": "Mason Helper", "SalaryBasis": "Weekly", "FixedSalary": "105.00" }, { "Emp_Id": "9", "Identity_No": "", "Emp_Name": "Lakshmi", "Address": "Madurai", "Date_Of_Birth": "", "Desig_Name": "Mason Helper", "Desig_Description": "Mason Helper", "SalaryBasis": "Weekly", "FixedSalary": "100.00" }, { "Emp_Id": "10", "Identity_No": "", "Emp_Name": "Palani", "Address": "Madurai", "Date_Of_Birth": "", "Desig_Name": "Carpenter", "Desig_Description": "Carpenter", "SalaryBasis": "Weekly", "FixedSalary": "200.00" }, { "Emp_Id": "11", "Identity_No": "", "Emp_Name": "Annamalai", "Address": "Madurai", "Date_Of_Birth": "", "Desig_Name": "Carpenter", "Desig_Description": "Carpenter", "SalaryBasis": "Weekly", "FixedSalary": "220.00" }, { "Emp_Id": "12", "Identity_No": "", "Emp_Name": "David", "Address": "Madurai", "Date_Of_Birth": "", "Desig_Name": "Steel Fixer", "Desig_Description": "Steel Fixer", "SalaryBasis": "Weekly", "FixedSalary": "220.00" }, { "Emp_Id": "13", "Identity_No": "", "Emp_Name": "Chandru", "Address": "Madurai", "Date_Of_Birth": "", "Desig_Name": "Steel Fixer", "Desig_Description": "Steel Fixer", "SalaryBasis": "Weekly", "FixedSalary": "220.00" }, { "Emp_Id": "14", "Identity_No": "", "Emp_Name": "Mani", "Address": "Madurai", "Date_Of_Birth": "", "Desig_Name": "Steel Helper", "Desig_Description": "Steel Helper", "SalaryBasis": "Weekly", "FixedSalary": "175.00" }, { "Emp_Id": "15", "Identity_No": "", "Emp_Name": "Karthik", "Address": "Madurai", "Date_Of_Birth": "", "Desig_Name": "Wood Fixer", "Desig_Description": "Wood Fixer", "SalaryBasis": "Weekly", "FixedSalary": "195.00" }, { "Emp_Id": "16", "Identity_No": "", "Emp_Name": "Bala", "Address": "Madurai", "Date_Of_Birth": "", "Desig_Name": "Wood Fixer", "Desig_Description": "Wood Fixer", "SalaryBasis": "Weekly", "FixedSalary": "185.00" }, { "Emp_Id": "17", "Identity_No": "", "Emp_Name": "Tamil arasi", "Address": "Madurai", "Date_Of_Birth": "", "Desig_Name": "Wood Helper", "Desig_Description": "Wood Helper", "SalaryBasis": "Weekly", "FixedSalary": "185.00" }, { "Emp_Id": "18", "Identity_No": "", "Emp_Name": "Perumal", "Address": "Madurai", "Date_Of_Birth": "", "Desig_Name": "Cook", "Desig_Description": "Cook", "SalaryBasis": "Weekly", "FixedSalary": "105.00" }, { "Emp_Id": "19", "Identity_No": "", "Emp_Name": "Andiappan", "Address": "Madurai", "Date_Of_Birth": "", "Desig_Name": "Watchman", "Desig_Description": "Watchman", "SalaryBasis": "Weekly", "FixedSalary": "150.00"}] }; //var jsonObj = eval('(' + HfJsonValue + ')'); var jsonObj = jQuery.parseJSON(HfJsonValue); and my page looks like this <div id="Pagination" class="page-numbers"></div> <br style="clear:both;" /> <div id="Searchresult"></div> <div id="hiddenresult" style="display:none;"> </div> <script type="text/javascript"> var pagination_options = { num_edge_entries: 2, num_display_entries: 8, callback: pageselectCallback, items_per_page: 3 } function pageselectCallback(page_index, jq) { var items_per_page = pagination_options.items_per_page; var offset = page_index * items_per_page; var new_content = $('#hiddenresult div.resultsdiv').slice(offset, offset + items_per_page).clone(); $('#Searchresult').empty().append(new_content); return false; } function initPagination() { var num_entries = $('#hiddenresult div.resultsdiv').length; // Create pagination element $("#Pagination").pagination(num_entries, pagination_options); } $(document).ready(function() { Iteratejsondata(); initPagination(); }); </script> I ve inspected through firebug and saw all jquery files have been downloaded but why this is hapenning? Any suggestion....

  Read the article

• MIPS: removing non alpha-numeric characters from a string

  - by Kron

  I'm in the process of writing a program in MIPS that will determine whether or not a user entered string is a palindrome. It has three subroutines which are under construction. Here is the main block of code, subroutines to follow with relevant info: .data Buffer: .asciiz " " # 80 bytes in Buffer intro: .asciiz "Hello, please enter a string of up to 80 characters. I will then tell you if that string was a palindrome!" .text main: li $v0, 4 # print_string call number la $a0, intro # pointer to string in memory syscall li $v0, 8 #syscall code for reading string la $a0, Buffer #save read string into buffer li $a1, 80 #string is 80 bytes long syscall li $s0, 0 #i = 0 li $t0, 80 #max for i to reach la $a0, Buffer jal stripNonAlpha li $v0, 4 # print_string call number la $a0, Buffer # pointer to string in memory syscall li $s0, 0 jal findEnd jal toUpperCase li $v0, 4 # print_string call number la $a0, Buffer # pointer to string in memory syscall Firstly, it's supposed to remove all non alpha-numeric characters from the string before hand, but when it encounters a character designated for removal, all characters after that are removed. stripNonAlpha: beq $s0, $t0, stripEnd #if i = 80 end add $t4, $s0, $a0 #address of Buffer[i] in $t4 lb $s1, 0($t4) #load value of Buffer[i] addi $s0, $s0, 1 #i = i + 1 slti $t1, $s1, 48 #if ascii code is less than 48 bne $t1, $zero, strip #remove ascii character slti $t1, $s1, 58 #if ascii code is greater than 57 #and slti $t2, $s1, 65 #if ascii code is less than 65 slt $t3, $t1, $t2 bne $t3, $zero, strip #remove ascii character slti $t1, $s1, 91 #if ascii code is greater than 90 #and slti $t2, $s1, 97 #if ascii code is less than 97 slt $t3, $t1, $t2 bne $t3, $zero, strip #remove ascii character slti $t1, $s1, 123 #if ascii character is greater than 122 beq $t1, $zero, strip #remove ascii character j stripNonAlpha #go to stripNonAlpha strip: #add $t5, $s0, $a0 #address of Buffer[i] in $t5 sb $0, 0($t4) #Buffer[i] = 0 #addi $s0, $s0, 1 #i = i + 1 j stripNonAlpha #go to stripNonAlpha stripEnd: la $a0, Buffer #save modified string into buffer jr $ra #return Secondly, it is supposed to convert all lowercase characters to uppercase. toUpperCase: beq $s0, $s2, upperEnd add $t4, $s0, $a0 lb $s1, 0($t4) addi $s1, $s1, 1 slti $t1, $s1, 97 #beq $t1, $zero, upper slti $t2, $s1, 123 slt $t3, $t1, $t2 bne $t1, $zero, upper j toUpperCase upper: add $t5, $s0, $a0 addi $t6, $t6, -32 sb $t6, 0($t5) j toUpperCase upperEnd: la $a0, Buffer jr $ra The final subroutine, which checks if the string is a palindrome isn't anywhere near complete at the moment. I'm having trouble finding the end of the string because I'm not sure what PC-SPIM uses as the carriage return character. Any help is appreciated, I have the feeling most of my problems result from something silly and stupid so feel free to point out anything, no matter how small.

  Read the article

• Paging through records (json data) using jQuery...

  - by Pandiya Chendur

  I have a JSON result that contains numerous records. I'd like to show the first five records in one page and create pager links which have to move to that page with five record so on. I don't want the page to refresh which is why I'm hoping for a combination of JavaScript and jQuery. My json data looks like this: {"Table" : [ {"Emp_Id" : "3","Identity_No" : "","Emp_Name" : "Jerome","Address" : "Madurai","Date_Of_Birth" : "","Desig_Name" : "Supervisior","Desig_Description" : "Supervisior of the Construction","SalaryBasis" : "Monthly","FixedSalary" : "25000.00"}, {"Emp_Id" : "4","Identity_No" : "","Emp_Name" : "Mohan","Address" : "Madurai","Date_Of_Birth" : "","Desig_Name" : "Acc ","Desig_Description" : "Accountant","SalaryBasis" : "Monthly","FixedSalary" : "200.00"}, {"Emp_Id" : "5","Identity_No" : "","Emp_Name" : "Murugan","Address" : "Madurai","Date_Of_Birth" : "","Desig_Name" : "Mason","Desig_Description" : "Mason","SalaryBasis" : "Weekly","FixedSalary" : "150.00"}, {"Emp_Id" : "6","Identity_No" : "","Emp_Name" : "Ram","Address" : "Madurai","Date_Of_Birth" : "","Desig_Name" : "Mason","Desig_Description" : "Mason","SalaryBasis" : "Weekly","FixedSalary" : "120.00"}, {"Emp_Id" : "7","Identity_No" : "","Emp_Name" : "Raja","Address" : "Madurai","Date_Of_Birth" : "","Desig_Name" : "Mason","Desig_Description" : "Mason","SalaryBasis" : "Weekly","FixedSalary" : "135.00"}, {"Emp_Id" : "8","Identity_No" : "","Emp_Name" : "Raja kumar","Address" : "Madurai","Date_Of_Birth" : "","Desig_Name" : "Mason Helper","Desig_Description" : "Mason Helper","SalaryBasis" : "Weekly","FixedSalary" : "105.00"}, {"Emp_Id" : "9","Identity_No" : "","Emp_Name" : "Lakshmi","Address" : "Madurai","Date_Of_Birth" : "","Desig_Name" : "Mason Helper","Desig_Description" : "Mason Helper","SalaryBasis" : "Weekly","FixedSalary" : "100.00"}, {"Emp_Id" : "10","Identity_No" : "","Emp_Name" : "Palani","Address" : "Madurai","Date_Of_Birth" : "","Desig_Name" : "Carpenter","Desig_Description" : "Carpenter","SalaryBasis" : "Weekly","FixedSalary" : "200.00"}, {"Emp_Id" : "11","Identity_No" : "","Emp_Name" : "Annamalai","Address" : "Madurai","Date_Of_Birth" : "","Desig_Name" : "Carpenter","Desig_Description" : "Carpenter","SalaryBasis" : "Weekly","FixedSalary" : "220.00"}, {"Emp_Id" : "12","Identity_No" : "","Emp_Name" : "David","Address" : "Madurai","Date_Of_Birth" : "","Desig_Name" : "Steel Fixer","Desig_Description" : "Steel Fixer","SalaryBasis" : "Weekly","FixedSalary" : "220.00"}, {"Emp_Id" : "13","Identity_No" : "","Emp_Name" : "Chandru","Address" : "Madurai","Date_Of_Birth" : "","Desig_Name" : "Steel Fixer","Desig_Description" : "Steel Fixer","SalaryBasis" : "Weekly","FixedSalary" : "220.00"}, {"Emp_Id" : "14","Identity_No" : "","Emp_Name" : "Mani","Address" : "Madurai","Date_Of_Birth" : "","Desig_Name" : "Steel Helper","Desig_Description" : "Steel Helper","SalaryBasis" : "Weekly","FixedSalary" : "175.00"}, {"Emp_Id" : "15","Identity_No" : "","Emp_Name" : "Karthik","Address" : "Madurai","Date_Of_Birth" : "","Desig_Name" : "Wood Fixer","Desig_Description" : "Wood Fixer","SalaryBasis" : "Weekly","FixedSalary" : "195.00"}, {"Emp_Id" : "16","Identity_No" : "","Emp_Name" : "Bala","Address" : "Madurai","Date_Of_Birth" : "","Desig_Name" : "Wood Fixer","Desig_Description" : "Wood Fixer","SalaryBasis" : "Weekly","FixedSalary" : "185.00"}, {"Emp_Id" : "17","Identity_No" : "","Emp_Name" : "Tamil arasi","Address" : "Madurai","Date_Of_Birth" : "","Desig_Name" : "Wood Helper","Desig_Description" : "Wood Helper","SalaryBasis" : "Weekly","FixedSalary" : "185.00"}, {"Emp_Id" : "18","Identity_No" : "","Emp_Name" : "Perumal","Address" : "Madurai","Date_Of_Birth" : "","Desig_Name" : "Cook","Desig_Description" : "Cook","SalaryBasis" : "Weekly","FixedSalary" : "105.00"}, {"Emp_Id" : "19","Identity_No" : "","Emp_Name" : "Andiappan","Address" : "Madurai","Date_Of_Birth" : "","Desig_Name" : "Watchman","Desig_Description" : "Watchman","SalaryBasis" : "Weekly","FixedSalary" : "150.00"} ] } And as of now my result looks like this, http://img401.imageshack.us/img401/2500/yuidtsum.jpg I have used jQuery for this: var jsonObj = JSON.parse(HfJsonValue); for (var i = jsonObj.Table.length - 1; i >= 0; i--) { var employee = jsonObj.Table[i]; $('<div class="resultsdiv"><br /><span class="resultName">' + employee.Emp_Name + '</span><span class="resultfields" style="padding-left:100px;">Category&nbsp;:</span>&nbsp;<span class="resultfieldvalues">' + employee.Desig_Name + '</span><br /><br /><span id="SalaryBasis" class="resultfields">Salary Basis&nbsp;:</span>&nbsp;<span class="resultfieldvalues">' + employee.SalaryBasis + '</span><span class="resultfields" style="padding-left:25px;">Salary&nbsp;:</span>&nbsp;<span class="resultfieldvalues">' + employee.FixedSalary + '</span><span style="font-size:110%;font-weight:bolder;padding-left:25px;">Address&nbsp;:</span>&nbsp;<span class="resultfieldvalues">' + employee.Address + '</span></div>') .insertAfter('#ResultsDiv'); } My image contains only 6 records as of now. Any suggestions?

  Read the article

• Best programming aids for a quadriplegic programmer

  - by Peter Rowell

  Before you jump to conclusions, yes, this is programming related. It covers a situation that comes under the heading of, "There, but for the grace of God, go you or I." This is brand new territory for me so I'm asking for some serious help here. A young man, Honza Ripa, in a nearby town did the classic Dumb Thing two weeks after graduating from High School -- he dove into shallow water in the Russian River and had a C-4/C-5 break, sometimes called a Swimming Pool break. In a matter of seconds he went from an exceptional golfer and wrestler to a quadriplegic. (Read the story ... all of us should have been so lucky as to have a girlfriend like Brianna.) That was 10 months ago and he has regained only tiny amounts of control of his right index finger and a couple of other hand/foot motions, none of them fine-grained. His total control of his computer (currently running Win7, but we can change that as needed) is via voice command. Honza's not dumb. He had a 3.7 GPA with AP math and physics. The Problems: Since all of his input is via voice command, he is concerned that the predominance of special characters in programming will require vast amount of verbose commands. Does anyone know of any well done voice input system specifically designed for programmers? I'm thinking about something that might be modal--e.g. you say "Python input" and it goes into a macro mode for doing class definitions, etc. Given all of the RSI in programmer-land there's got to be something out there. What OS(es) does it run on? I am planning on teaching him Python, which is my preferred language for programming and teaching. Are there any applications / whatevers that are written in Python and would be a particularly good match for engaging him mentally while supporting his disability? One of his expressed interests is in stock investing, but that not might be a good starting point for a brand-new programmer. There are a lot of environments (Flash, JavaScript, etc) that are not particularly friendly to people with accessibility challenges. I vaguely remember (but cannot find) a research project that basically created an overlay system on top of a screen environment and then allowed macro command construction on top of the screen image. If we can get/train this system, we may be able to remove many hurdles to using the net. I am particularly interested in finding open source Python-based robotics and robotic prostheses projects so that he can simultaneously learn advanced programming concepts while learning to solve some of his own immediate problems. I've done a ton of googling on this, but I know there things I'm missing. I'm asking the SO community to step up to the plate here. I know this group has the answers, so let me hear them! Overwhelm me with the opportunities that any of us might have/need to still program after such a life-changing event.

  Read the article

• Pass or Get a value from Parent ViewModel down to Sub-ViewModel?

  - by mkmurray

  I am using the MVVM Light framework as well as Unity for DI. I have some nested Views, each bound to a corresponding ViewModel. The ViewModels are bound to each View's root control DataContext via the ViewModelLocator idea that Laurent Bugnion has put into MVVM Light. This allows for finding ViewModels via a static resource and for controlling the lifetime of ViewModels via a Dependency Injection framework, in this case Unity. It also allows for Expression Blend to see everything in regard to ViewModels and how to bind them. As I stated the Views have a healthy dose of nesting, but the ViewModels don't really know anything about each other. A parent view binds to its corresponding ViewModel via the static resource ViewModelLocator (which uses Unity to control the construction and lifetime of the ViewModel object). That parent view contains a user control in it that is another sub-view, which then goes and gets its corresponding ViewModel via the ViewModelLocator as well. The ViewModels don't have references to each other or know any hierarchy in regard to each other. So here's an example of how the ViewModels do interact via messaging. I've got a parent View that has a ComboBox databound to an ObservableCollection in its ViewModel. The ComboBox's SelectedItem is also bound (two-way) to a property on the ViewModel. When the selection of the ComboBox changes, this is to trigger updates in other Views and sub-Views. Currently I am accomplishing this via the Messaging system that is found in MVVM Light. So I'm wondering what the best practice would be to get information from one ViewModel to another? In this case, what I need to pass down to sub-ViewModels is basically a user Guid representing the currently logged in user. The top-most parent View (well, ViewModel) will know this information, but I'm not sure how to get it down into the sub-ViewModels. Some possible approaches I can think of: Should the sub-ViewModel ask the static resource ViewModelLocator for a reference to the same object the parent View is using and access the property that way? It seems like ViewModels going through each other's properties is not very clean and couples them together unnecessarily. I'm already using messaging to notify the sub-Views that the user selected a new item in the ComboBox and to update accordingly. But the object type that is being selected in the ComboBox is not really directly related to this data value that the sub-Views need.

  Read the article

< Previous Page | 17 18 19 20 21 22 23 24 25 26  | Next Page >