Search Results

Search found 1103 results on 45 pages for 'corporation'.

Page 21/45 | < Previous Page | 17 18 19 20 21 22 23 24 25 26 27 28  | Next Page >

• In 10.10, USB 3.0 PCI Express card recognized by lspci but not lsusb or dmesg. How to fix?

  - by Paul

  Asus N PC, runs 10.10 x86_64 The Asus N comes with 4 usb 2.0 ports, each labelled 2.0 on the case. Attempting to add two usb 3.0 ports to be provided by a generic usb 3.0 pci express card installed in the pci expres slot. The new card says usb 3.0 and has the blue ports. The card is installed into the laptop unpowered, then the laptop is powered on and boots normally. Nothing happens when a USB 3.0 flash drive is inserted into the usb 3.0 port. uname -a Linux drpaulbrewer-N90SV 2.6.35.8 #1 SMP Fri Jan 14 15:54:11 EST 2011 x86_64 GNU/Linux lspci -v 00:00.0 Host bridge: Silicon Integrated Systems [SiS] 671MX Subsystem: ASUSTeK Computer Inc. Device 1b27 Flags: bus master, medium devsel, latency 64 Kernel modules: sis-agp 00:01.0 PCI bridge: Silicon Integrated Systems [SiS] PCI-to-PCI bridge (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 I/O behind bridge: 0000d000-0000dfff Memory behind bridge: fa000000-fdefffff Prefetchable memory behind bridge: 00000000d0000000-00000000dfffffff Capabilities: [d0] Express Root Port (Slot+), MSI 00 Capabilities: [a0] MSI: Enable+ Count=1/1 Maskable- 64bit- Capabilities: [f4] Power Management version 2 Capabilities: [70] Subsystem: Silicon Integrated Systems [SiS] PCI-to-PCI bridge Kernel driver in use: pcieport 00:02.0 ISA bridge: Silicon Integrated Systems [SiS] SiS968 [MuTIOL Media IO] (rev 01) Flags: bus master, medium devsel, latency 0 00:02.5 IDE interface: Silicon Integrated Systems [SiS] 5513 [IDE] (rev 01) (prog-if 80 [Master]) Subsystem: ASUSTeK Computer Inc. Device 1b27 Flags: bus master, medium devsel, latency 128 I/O ports at 01f0 [size=8] I/O ports at 03f4 [size=1] I/O ports at 0170 [size=8] I/O ports at 0374 [size=1] I/O ports at ffe0 [size=16] Capabilities: [58] Power Management version 2 Kernel driver in use: pata_sis 00:03.0 USB Controller: Silicon Integrated Systems [SiS] USB 1.1 Controller (rev 0f) (prog-if 10 [OHCI]) Subsystem: ASUSTeK Computer Inc. Device 1b27 Flags: bus master, medium devsel, latency 64, IRQ 20 Memory at f9fff000 (32-bit, non-prefetchable) [size=4K] Kernel driver in use: ohci_hcd 00:03.1 USB Controller: Silicon Integrated Systems [SiS] USB 1.1 Controller (rev 0f) (prog-if 10 [OHCI]) Subsystem: ASUSTeK Computer Inc. Device 1b27 Flags: bus master, medium devsel, latency 64, IRQ 21 Memory at f9ffe000 (32-bit, non-prefetchable) [size=4K] Kernel driver in use: ohci_hcd 00:03.3 USB Controller: Silicon Integrated Systems [SiS] USB 2.0 Controller (prog-if 20 [EHCI]) Subsystem: ASUSTeK Computer Inc. Device 1b27 Flags: bus master, medium devsel, latency 64, IRQ 22 Memory at f9ffd000 (32-bit, non-prefetchable) [size=4K] Capabilities: [50] Power Management version 2 Kernel driver in use: ehci_hcd 00:04.0 Ethernet controller: Silicon Integrated Systems [SiS] 191 Gigabit Ethernet Adapter (rev 02) Subsystem: ASUSTeK Computer Inc. Device 11f5 Flags: bus master, medium devsel, latency 0, IRQ 19 Memory at f9ffcc00 (32-bit, non-prefetchable) [size=128] I/O ports at cc00 [size=128] Capabilities: [40] Power Management version 2 Kernel driver in use: sis190 Kernel modules: sis190 00:05.0 IDE interface: Silicon Integrated Systems [SiS] SATA Controller / IDE mode (rev 03) (prog-if 8f [Master SecP SecO PriP PriO]) Subsystem: ASUSTeK Computer Inc. Device 1b27 Flags: bus master, medium devsel, latency 64, IRQ 17 I/O ports at c800 [size=8] I/O ports at c400 [size=4] I/O ports at c000 [size=8] I/O ports at bc00 [size=4] I/O ports at b800 [size=16] I/O ports at b400 [size=128] Capabilities: [58] Power Management version 2 Kernel driver in use: sata_sis Kernel modules: sata_sis 00:06.0 PCI bridge: Silicon Integrated Systems [SiS] PCI-to-PCI bridge (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 Memory behind bridge: fdf00000-fdffffff Capabilities: [b0] Subsystem: Silicon Integrated Systems [SiS] Device 0004 Capabilities: [c0] MSI: Enable+ Count=1/1 Maskable- 64bit+ Capabilities: [d0] Express Root Port (Slot+), MSI 00 Capabilities: [f4] Power Management version 2 Kernel driver in use: pcieport 00:07.0 PCI bridge: Silicon Integrated Systems [SiS] PCI-to-PCI bridge (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=03, subordinate=06, sec-latency=0 I/O behind bridge: 0000e000-0000efff Memory behind bridge: fe000000-febfffff Prefetchable memory behind bridge: 00000000f6000000-00000000f8ffffff Capabilities: [b0] Subsystem: Silicon Integrated Systems [SiS] Device 0004 Capabilities: [c0] MSI: Enable+ Count=1/1 Maskable- 64bit+ Capabilities: [d0] Express Root Port (Slot+), MSI 00 Capabilities: [f4] Power Management version 2 Kernel driver in use: pcieport 00:0f.0 Audio device: Silicon Integrated Systems [SiS] Azalia Audio Controller Subsystem: ASUSTeK Computer Inc. Device 17b3 Flags: bus master, medium devsel, latency 0, IRQ 18 Memory at f9ff4000 (32-bit, non-prefetchable) [size=16K] Capabilities: [50] Power Management version 2 Kernel driver in use: HDA Intel Kernel modules: snd-hda-intel 01:00.0 VGA compatible controller: nVidia Corporation G96 [GeForce GT 130M] (rev a1) (prog-if 00 [VGA controller]) Subsystem: ASUSTeK Computer Inc. Device 2021 Flags: bus master, fast devsel, latency 0, IRQ 16 Memory at fc000000 (32-bit, non-prefetchable) [size=16M] Memory at d0000000 (64-bit, prefetchable) [size=256M] Memory at fa000000 (64-bit, non-prefetchable) [size=32M] I/O ports at dc00 [size=128] [virtual] Expansion ROM at fde80000 [disabled] [size=512K] Capabilities: [60] Power Management version 3 Capabilities: [68] MSI: Enable- Count=1/1 Maskable- 64bit+ Capabilities: [78] Express Endpoint, MSI 00 Capabilities: [b4] Vendor Specific Information: Len=14 <?> Kernel driver in use: nvidia Kernel modules: nvidia-current, nouveau, nvidiafb 02:00.0 Network controller: Atheros Communications Inc. AR928X Wireless Network Adapter (PCI-Express) (rev 01) Subsystem: Device 1a3b:1067 Flags: bus master, fast devsel, latency 0, IRQ 16 Memory at fdff0000 (64-bit, non-prefetchable) [size=64K] Capabilities: [40] Power Management version 2 Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit- Capabilities: [60] Express Legacy Endpoint, MSI 00 Capabilities: [90] MSI-X: Enable- Count=1 Masked- Kernel driver in use: ath9k Kernel modules: ath9k 03:00.0 USB Controller: NEC Corporation uPD720200 USB 3.0 Host Controller (rev 03) (prog-if 30) Flags: bus master, fast devsel, latency 0, IRQ 10 Memory at febfe000 (64-bit, non-prefetchable) [size=8K] Capabilities: [50] Power Management version 3 Capabilities: [70] MSI: Enable- Count=1/8 Maskable- 64bit+ Capabilities: [90] MSI-X: Enable- Count=8 Masked- Capabilities: [a0] Express Endpoint, MSI 00 lsusb Bus 003 Device 002: ID 0b05:1751 ASUSTek Computer, Inc. BT-253 Bluetooth Adapter Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 004: ID 0bda:0158 Realtek Semiconductor Corp. USB 2.0 multicard reader Bus 001 Device 002: ID 04f2:b071 Chicony Electronics Co., Ltd 2.0M UVC Webcam / CNF7129 Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub dmesg trying to post dmesg exceeded the stackexchange posting limit of 30K... but nothing there is usb 3.0

  Read the article

• Oracle Coherence-Free Hands On Technical Workshop –July 11th 2013 London

  - by JuergenKress

  Oracle Coherence-Free Hands On Technical Workshop    WHEN                       WHERE              HOW TO REGISTER Thursday 11th of July 2013 9:30am- 4pm Oracle Corporation UK Ltd. One South Place, London EC2M 2RB Fill in the form at the bottom of this page For details and registration please visit the C2B2 website WebLogic Partner Community For regular information become a member in the WebLogic Partner Community please visit: http://www.oracle.com/partners/goto/wls-emea ( OPN account required). If you need support with your account please contact the Oracle Partner Business Center. Blog Twitter LinkedIn Mix Forum Wiki Technorati Tags: C2B2,Coherence,Education,WebLogic,WebLogic Community,Oracle,OPN,Jürgen Kress

  Read the article

• Can't activate "mirror display"

  - by Nemo Peeters

  I have Ubuntu 12.04 on a Dell latitude E6410, I have a problem when using the VGA output I always have dual monitor and can't switch on the "mirror display" toggle under systems setting/displays. It's rather annoying when having to do presentation with a video projector. the option "mirror display" is in light grey and I can"t tick the box. Thanks for those who might have an idea how to resolve this? update: driver is: Intel® Ironlake Mobile x86/MMX/SSE2 card something like this ? description: VGA compatible controller product: Core Processor Integrated Graphics Controller vendor: Intel Corporation physical id: 2 bus info: pci@0000:00:02.0 version: 02 width: 64 bits clock: 33MHz

  Read the article

• Connect Lenovo W520 with TV using VGA output

  - by el10780

  I am trying to connect my Lenovo Thinkpad W520 with my 32 inch TV (Samsung) using he VGA output.The problem is that after connecting it with the TV I go to System Settings and then Monitors but it doesn't show up there.I rebooted my system and again nothing happened.So I tried to change my default video card in the BIOS and I chose to boot with Intel's card only.Again though nothing happened.I didn't tried with my NVidia video card because last time I did that Ubuntu was completely destroyed after saving the configuration file through the NVidia's X Server Control Panel.My laptop has NVidia Optimus technology,but I can choose from the BIOS which video card I want to use.After running : lspci | grep VGA in terminal the results are: 00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09) (It shows only the Intel's video card because curently I have chose to boot using only Intel's video card.If I chose from the BIOS that I want to use the NVidia Optimus Technology and the option to let the system whether or not the Optimus technology is supported then both cards will show up in terminal after running lspci | grep VGA.)

  Read the article

• Ubuntu always freezes on a friend's machine

  - by missingfaktor

  I am posting this on my friend's behalf. I installed Ubuntu 12.04 on my friend's computer but it continuously froze, no desktop effects worked, and it was frankly unusable. I thought this might be an issue with Unity and how it interacts with his hardware, so I tried several other desktop environments on his machine. These include KDE, Xfce, and GNOME. The problems persisted regardless of the desktop environment. I would like to note that he dual boots his system with Windows 7. Even there no desktop effects work but the system is reasonably stable. The following screenshots describe some of his system information (He is running Xfce at this time): 1: 2: Card information: intel corporation 82G33/G31 integrated graphics controller (rev02). What is the issue and how can it be solved? Please let me know if I should add any more information. Thank you.

  Read the article

• Mint 13 no longer using NVidia card after restart

  - by GenericUsrnme

  Here's the story; I bought a new graphics card, along with other parts, about a week ago. I put them in, install new drivers everything's working fine. Now after a restart I boot into some lovely 1024x768 resolution with only one screen on. I check in the NVidia X Server settings to see if my screen was changed there, there's nothing there except Application profiles and nvidia-settings. I check hardinfo to see if the card is actually recognised; VGA compatible controller: NVIDIA Corporation GK106 [GeForce GTX 660] (rev a1) (prog-if 00 [VGA controller]) I don't really know much about the graphics end of things so I'm not sure what I should be doing here to fix this, I don't even know what I should be looking FOR even, so any help is much appreciated! Thanks in advance

  Read the article

• Gnome-shell video freeze

  - by josephsmendoza

  So i have a 14.04 Ubuntu Gnome Live USB on my 16GB USB 3.0. It runs fine except sometimes it the screen will freeze, but I know stuff is still happening cause I can hear media playing. I did a little digging and i'm still not sure why, can someone help? Sorry if i don't provide enough details. ubuntu-gnome@ubuntu-gnome:~$ lspci -nnk | grep -iA2 VGA 03:00.0 VGA compatible controller [0300]: NVIDIA Corporation C79 [GeForce 9400}[10de:0867] (rev b1) Subsystem: Apple Inc. iMac 9,1 [106b:00ad] Kernel driver in use: nouveau

  Read the article

• Ubuntu 14.04 doesn't detect my discrete GPU

  - by user258887

  I recently purchased a laptop with an Nvidia GeForce 860m, and have installed Ubuntu 14.04. On my old laptop I had 12.04, which automatically filled Additional Drivers with Nvidia drivers. But on this computer, the only thing in Additional Drivers is Qualcomm. So I manually installed Nvidia, but X Server Settings doesn't seem to detect any GPU... lspci | grep VGA reports only my integrated Intel GPU, but lspci -v reports many things, including the Nvidia GPU: 01:00.0 3D controller: NVIDIA Corporation GM107M [GeForce GTX 860M] (rev a2) Subsystem: ASUSTeK Computer Inc. Device 157d Flags: fast devsel, IRQ 16 Memory at ec000000 (32-bit, non-prefetchable) [size=16M] Memory at c0000000 (64-bit, prefetchable) [size=256M] Memory at d0000000 (64-bit, prefetchable) [size=32M] I/O ports at e000 [size=128] Expansion ROM at ed000000 [disabled] [size=512K] Capabilities: access denied Don't know what any of that means. Not sure if it's supposed to say 'access denied'... I need my GPU to do CUDA and OpenGL programming. What else can I do to figure out why this isn't working?

  Read the article

• Why has wireless disappeared after my 12.10 upgrade?

  - by Shay Guy

  I just upgraded to 12.10 on my Lenovo B570 laptop. NetworkManager isn't displaying a submenu for wireless connections at all, even though I downloaded the update through the wireless connection. This displeases me. Stuff I've tried includes: $ sudo modprobe wl FATAL: Module wl not found. $ sudo lspci -nn | grep "BCM" 02:00.0 Network controller [0280]: Broadcom Corporation BCM4313 802.11b/g/n Wireless LAN Controller [14e4:4727] (rev 01) $ rfkill list all 0: ideapad_wlan: Wireless LAN Soft blocked: no Hard blocked: no ETA: linux-headers-generic is already the newest version, and what I get when reinstalling bcmwl-kernel-source includes the following, near the end. DKMS: install completed. ERROR: Module b43 does not exist in /proc/modules ERROR: Module b43legacy does not exist in /proc/modules ERROR: Module ssb does not exist in /proc/modules ERROR: Module bcm43xx does not exist in /proc/modules ERROR: Module brcm80211 does not exist in /proc/modules ERROR: Module brcmfmac does not exist in /proc/modules ERROR: Module brcmsmac does not exist in /proc/modules ERROR: Module bcma does not exist in /proc/modules FATAL: Module wl not found.

  Read the article

• What makes Erlang suitable for cloud applications?

  - by Duncan

  We are starting a new project and implementing on our corporations's instantiation of an openstack cloud (see http://www.openstack.org/). The project is security tooling for our corporation. We currently run many hundreds of dedicated servers for security tools and are moving them to our corporations instantiation of openstack. Other projects in my company currently use erlang in several distributed server applications, and other Q/A point out erlang is used in several popular cloud services. I am trying to convince others to consider where it might be applicable on our project. What are erlang's strengths for cloud programming? Where are areas it is particularly appropriate to use erlang?

  Read the article

• Wireless not connecting on Ubuntu 13.10, Toshiba Satellite pro L 650

  - by user204842

  I have just installed Ubuntu 13.10 on my Toshiba Satellite Pro L650. After several reboots, installing/ uninstalling the broadcom driver I still can't connect. It detects the wi fi signals and the icon flashes as if it's trying to connect but never actually does. I'm really quite rubbish with code and stuff, but I really like Ubuntu as an OS and would really appreciate any suggestions anyone can offer! 02:00.0 Ethernet controller: Qualcomm Atheros AR8151 v1.0 Gigabit Ethernet (rev c0) 03:00.0 Network controller: Broadcom Corporation BCM4313 802.11bgn Wireless Network Adapter (rev 01)

  Read the article

• Broadcom 4365 wireless driver on 12.04 with 3.4 / 3.5 kernel

  - by zaid

  I used this package to install the driver on 3.2 Kernel and it was working perfectly. Unfortunately the system used to freeze randomly with 3.2 kernel so I installed 3.4 kernel, now there is no freezing, the only problem is that my wifi card is not working, I tried to re-install the package, but didn't work. I can see the driver in the "additional drivers" and it say that it is active, but when I execute iwconfig it doesn't show up. I've even tried ndiswraper and that didn't work either. my lspci: 01:00.0 Network controller: Broadcom Corporation Device 4365 (rev 01)

  Read the article

• I am the Webmaster now. Where do I start? [closed]

  - by John C

  I just changed jobs and will soon be in charge of a custom-built ASP.NET CMS and website for a fairly large corporation with global offices. I have IT and developer FTE resources available to me but I am trying to build a list of branding, project, and functionality points to review. What guides or lists can/should I use to evaluate this website before I begin adding features, creating new projects, or even redesigning and redeveloping the site? (I have been a webmaster/designer/developer for small, WordPress/Drupal sites for 10 years. I have been an unofficial webmaster (director/content manager) for a large site for 3 years (no direct development control over Sharepoint administration, IIS, or hosting ... but everything else, I did. Analytics, email, advertising, social, SEO, etc.).) Thank you!

  Read the article

• New Exadata and Exalogic Public References

  - by Javier Puerta

  CUSTOMER SUCCESS STORIES & SPOTLIGHTS Godfrey Phillips (India) Exadata, EBS, BI, Agile Published: October 23, 2013 Cortal Sensors (Germany) Exadata Published: October 18, 2013 ASBIS (Slovakia – local language version) English version Exadata, Linux, Oracle Database Appliance, SPARC T4-1, SPARC T5-2, Oracle Solaris Published: October 17, 2013 National Instruments (US) Exadata, BI, EM12c Published: October 15, 2013 United Microelectronics Corporation (Taiwan) Exadata Published: October 14, 2013 Panasonic Information Systems (Japan - local language version] Exadata, Data Guard Published: October 8, 2013 Pinellas County (USA) Exalytics, OEM, OBIEE, Hyperion PS Planning/Budgeting, EBS, Financials Published: Oct. 8, 2013 Korea Enterprise Data (Korea) [in English] Oracle SuperCluster, Solaris 11, ZFS Storage, OEM, Database Published: October 03, 2013

  Read the article

• nouveu driver logs into unity-2d by default

  - by Ubuntuser

  I have an old system with NVIDIA Corporation NV25 [GeForce4 Ti 4600]. When running Ubuntu , the nouveau driver loads fine but does not log into Unity with compiz. Instead it logs into Unity-2D. Any idea how to enable 3D/ compiz with the nouveau driver. OS: Ubuntu 12.04 Beta2 The nvidia driver is no more available for this graphics card, so have to rely on nouveau. UPDATE: Bug reported on launchpad . See here. There has been no reply as yet to this bug-report - does anyone have any idea how to resolve this? Further information, Also, if I use kubuntu desktop, kwin graphics works just fine. But, the users prefer Unity over KDE so I have uninstalled Kubuntu.

  Read the article

• How to explain that writing universally cross-platform C++ code and shipping products for all OSes is not that easy?

  - by sharptooth

  Our company ships a range of desktop products for Windows and lots of Linux users complain on forums that we should have been written versions of our products for Linux years ago and the reason why we don't do that is we're a greedy corporation all our technical specialists are underqualified idiots Our average product is something like 3 million lines of C++ code. My and my colleagues analysis is the following: writing cross-platform C++ code is not that easy preparing a lot of distribution packages and maintaining them for all widespread versions of Linux takes time our estimate is that Linux market is something like 5-15% of all users and those users will likely not want to pay for our effort when this is brought up the response is again that we're greedy underqualified idiots and that when everything is done right all this is easy and painless. How reasonable are our evaluations of the fact that writing cross-platform code and maintaining numerous ditribution packages takes lots of effort? Where can we find some easy yet detailed analysis with real life stories that show beyond the shadow of a doubt what amount of effort exactly it takes?

  Read the article

• Display not using xorg.conf?

  - by mark kirby

  How can I force my PC to use the xorg.conf file ? I have it set up correctly and it is located at etc/x11/xorg.conf but it is ignored by at start up, I know the file is valid as I created it using nvidia-settings. I just do not know why it is been ignored. Thanks for any help Section "ServerLayout" Identifier "Layout0" Screen 0 "Screen0" 0 0 InputDevice "Keyboard0" "CoreKeyboard" InputDevice "Mouse0" "CorePointer" Option "Xinerama" "0" EndSection Section "Files" EndSection Section "InputDevice" # generated from default Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/psaux" Option "Emulate3Buttons" "no" Option "ZAxisMapping" "4 5" EndSection Section "InputDevice" # generated from default Identifier "Keyboard0" Driver "kbd" EndSection Section "Monitor" # HorizSync source: edid, VertRefresh source: edid Identifier "Monitor0" VendorName "Unknown" ModelName "Vestel 40 FHD_LCD-TV" HorizSync 15.0 - 46.0 VertRefresh 49.0 - 61.0 Option "DPMS" EndSection Section "Device" Identifier "Device0" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "GeForce GTX 650" EndSection Section "Screen" Identifier "Screen0" Device "Device0" Monitor "Monitor0" DefaultDepth 24 Option "Stereo" "0" Option "nvidiaXineramaInfoOrder" "DFP-0" Option "metamodes" "1920x1080_60 +0+0" Option "SLI" "Off" Option "MultiGPU" "Off" Option "BaseMosaic" "off" SubSection "Display" Depth 24 EndSubSection EndSection

  Read the article

• google earth 7, 32bit in 12.10 runs without error but there is no image (globe)

  - by Dennis

  Everything seemed to install fine. I can start google earth and all layers are available, I can even zoom in and look at 3-D buildings. But there is absolutely no image data displayed at all. If you look at the whole globe the outlines are there on an invisible globe. As you zoom in the base looks dark grey almost black but there is no image. I have tried. Tools Options Graphics Safe Mode Tools Options Texture colors all combinations Tools Options Cache (tried several changes to the numbers) lspci shows Display controller: Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller (rev 03) Running on a Dell Inspiron 6000 laptop (1.5Gb memory)

  Read the article

• display port on x230 not working

  - by Aaron

  having problems with my new lenovo x230 - using dual montiors, only vga registers anything. This has the Intel graphics controller : 00:02.0 VGA compatible controller: Intel Corporation Ivy Bridge Graphics Controller (rev 09) TO get it to even boot, had to add the nomodeset parameter to the kernel. Otherwise will not even start up X Ive upgraded my kernel to the latest 3.6 with no difference. The display section reads the monitor as the only display and labels it as laptop. Cant seem to get it to work! Any help would be greatly appreciated.

  Read the article

• Wireless always disconnect

  - by Silas

  I upgraded my Ubuntu 10.10 for Ubuntu 12.04. I have a Emachines E625 With Ubuntu 12.04 my wireless always disconnects every 10 sec. It didn't do that with 10.10. Here is my config: Linux sylvain-eMachines-E625 3.2.0-30-generic #48-Ubuntu SMP Fri Aug 24 16:54:40 UTC 2012 i686 athlon i386 GNU/Linux total used free shared buffers cached Mem: 1759 1425 333 0 46 925 -/+ buffers/cache: 452 1306 Swap: 1788 0 1788 02:00.0 Network controller: Broadcom Corporation BCM4312 802.11b/g LP-PHY (rev 01) 05:00.0 Ethernet controller: Atheros Communications Inc. AR8132 Fast Ethernet (rev c0) I will really enjoy an answer to solve this problem. Thank you in advance! Silas

  Read the article

• Second monitor not coming back on after going into hibernate

  - by dabraude

  10 and a new problem has come up. When I my machine hibernates the second monitor does not come back on. I did not have this problem in 11.04. The main monitor is plugged into a vga port, and the second plugged into a display port then an adapter to vga the system is a Dell Optiplex 790 and the graphics card is (according to lspci) a VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09) I am running the classic Gnome desktop though the problem occurs in Unity as well.

  Read the article

• MEF (Microsoft Extensibility Framework) made simple (ish)

  Microsoft Extensibility Framework or MEF is one of the great features in Silverlight, designed around making Silverlight applications more extensible generally and provides a much more complete story for the separation of concerns. MEF then begs the question 'Why we care?' and 'What can MEF really do?' and we will address that here.Let us talk about a real world example for a moment.Say you are a vertical selling corporation of some kind, meaning that you sell to companies that do similar things....Did you know that DotNetSlackers also publishes .net articles written by top known .net Authors? We already have over 80 articles in several categories including Silverlight. Take a look: here.

  Read the article

• I'm the .1x programmer at my company. How can I best contribute?

  - by invaliduser

  I work at a newly-minted startup of five people. We have a Ph. D in machine learning, a former member of the RSpec core team, and the guy who compiles the Git binary for OS X. That's just the employees; the founder has a Ph. D and was CTO for a multi-billion-dollar corporation before leaving to start a (successful) startup, and has now left that to start this one. We also might get a guy with a Ph. D in math. Aaaaaaaaand then there's me, college-dropout intern. I think I'm pretty smart and I'm reading non-stop, but the delta of experience, skill, and knowledge between me and my co-workers is just breathtaking. So put yourself in their shoes: you've got a bright young intern who has a lot to learn but is at least energetic. What would be annoying? What use would you hope to get out of him in the here and now? What would be pleasantly surprising if it happened?

  Read the article

• If I enable/disable my wireless device, my computer will panic

  - by Yinyanghu

  Now, I use Debian 6.0.6 instead of Fedora 16/17. But I still sustain the problem of my wireless problem. If I enable/disable my laptop wireless device or my usb wifi adaptor, my laptop will panic. It seems like all the processes stop at that time and I have to restart my laptop directly. P.S. I think I installed the drivers correctly and the linux kernel may have some bugs. For example, when I unplug my usb wifi adaptor or I use this command, ifdown wlan0 I encounter this problem. Wireless Device: PCI: 03:00.0 Network controller: Broadcom Corporation BCM43225 802.11b/g/n (rev 01) USB: Bus 002 Device 005: ID 0bda:8176 Realtek Semiconductor Corp. RTL8188CUS 802.11n WLAN

  Read the article

• choppy streaming audio

  - by user88503

  I could use some help troubleshooting choppy streaming audio. The problem is jerky playback regardless of audio or video with audio. Both Chromium and Firefox have the problem, however files played directly on the machine with Rhythmbox sound just fine. I'm running 12.04 LTS on a C2D T9300. Most of the audio problems others ask about seem to be hardware related, so the following information might be relevant. sudo lshw -c multimedia *-multimedia description: Audio device product: 82801H (ICH8 Family) HD Audio Controller vendor: Intel Corporation physical id: 1b bus info: pci@0000:00:1b.0 version: 03 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list configuration: driver=snd_hda_intel latency=0 resources: irq:48 memory:f8400000-f8403fff

  Read the article

< Previous Page | 17 18 19 20 21 22 23 24 25 26 27 28  | Next Page >