Search Results

Search found 8605 results on 345 pages for 'general dynamics'.

Page 21/345 | < Previous Page | 17 18 19 20 21 22 23 24 25 26 27 28  | Next Page >

  • Ingredient Substitutes while Baking

    - by Rekha
    In our normal cooking, we substitute the vegetables for the gravies we prepare. When we start baking, we look for a good recipe. At least one or two ingredient will be missing. We do not know where to substitute what to bring same output. So we finally drop the plan of baking. Again after a month, we get the interest in baking. Again one or two lack of ingredient and that’s it. We keep on doing this for months. When I was going through the cooking blogs, I came across a site with the Ingredient Substitutes for Baking: (*) is to indicate that this substitution is ideal from personal experience. Flour Substitutes ( For 1 cup of Flour) All Purpose Flour 1/2 cup white cake flour plus 1/2 cup whole wheat flour 1 cup self-rising flour (omit using salt and baking powder if the recipe calls for it since self raising flour has it already) 1 cup plus 2 tablespoons cake flour 1/2 cup (75 grams) whole wheat flour 7/8 cup (130 grams) rice flour (starch) (do not replace all of the flour with the rice flour) 7/8 cup whole wheat Bread Flour 1 cup all purpose flour 1 cup all purpose flour plus 1 teaspoon wheat gluten (*) Cake Flour Place 2 tbsp cornstarch in 1 cup and fill the rest up with All Purpose flour (*) 1 cup all purpose flour minus 2 tablespoons Pastry flour Place 2 tbsp cornstarch in 1 cup and fill the rest up with All Purpose flour Equal parts of All purpose flour plus cake flour (*) Self-rising Flour 1½ teaspoons of baking powder plus ½ teaspoon of salt plus 1 cup of all-purpose flour. Cornstarch (1 tbsp) 2 tablespoons all-purpose flour 1 tablespoon arrowroot 4 teaspoons quick-cooking tapioca 1 tablespoon potato starch or rice starch or flour Tapioca (1 tbsp) 1 – 1/2 tablespoons all-purpose flour Cornmeal (stone ground) polenta OR corn flour (gives baked goods a lighter texture) if using cornmeal for breading,crush corn chips in a blender until they have the consistency of cornmeal. maize meal Corn grits Sweeteners ( for Every 1 cup ) * * (HV) denotes Healthy Version for low fat or fat free substitution in Baking Light Brown Sugar 2 tablespoons molasses plus 1 cup of white sugar Dark Brown Sugar 3 tablespoons molasses plus 1 cup of white sugar Confectioner’s/Powdered Sugar Process 1 cup sugar plus 1 tablespoon cornstarch Corn Syrup 1 cup sugar plus 1/4 cup water 1 cup Golden Syrup 1 cup honey (may be little sweeter) 1 cup molasses Golden Syrup Combine two parts light corn syrup plus one part molasses 1/2 cup honey plus 1/2 cup corn syrup 1 cup maple syrup 1 cup corn syrup Honey 1- 1/4 cups sugar plus 1/4 cup water 3/4 cup maple syrup plus 1/2 cup granulated sugar 3/4 cup corn syrup plus 1/2 cup granulated sugar 3/4 cup light molasses plus 1/2 cup granulated white sugar 1 1/4 cups granulated white or brown sugar plus 1/4 cup additional liquid in recipe plus 1/2 teaspoon cream of tartar Maple Syrup 1 cup honey,thinned with water or fruit juice like apple 3/4 cup corn syrup plus 1/4 cup butter 1 cup Brown Rice Syrup 1 cup Brown sugar (in case of cereals) 1 cup light molasses (on pancakes, cereals etc) 1 cup granulated sugar for every 3/4 cup of maple syrup and increase liquid in the recipe by 3 tbsp for every cup of sugar.If baking soda is used, decrease the amount by 1/4 teaspoon per cup of sugar substituted, since sugar is less acidic than maple syrup Molasses 1 cup honey 1 cup dark corn syrup 1 cup maple syrup 3/4 cup brown sugar warmed and dissolved in 1/4 cup of liquid ( use this if taste of molasses is important in the baked good) Cocoa Powder (Natural, Unsweetened) 3 tablespoons (20 grams) Dutch-processed cocoa plus 1/8 teaspoon cream of tartar, lemon juice or white vinegar 1 ounce (30 grams) unsweetened chocolate (reduce fat in recipe by 1 tablespoon) 3 tablespoons (20 grams) carob powder Semisweet baking chocolate (1 oz) 1 oz unsweetened baking chocolate plus 1 Tbsp sugar Unsweetened baking chocolate (1 oz ) 3 Tbsp baking cocoa plus 1 Tbsp vegetable oil or melted shortening or margarine Semisweet chocolate chips (1 cup) 6 oz semisweet baking chocolate, chopped (Alternatively) For 1 cup of Semi sweet chocolate chips you can use : 6 tablespoons unsweetened cocoa powder, 7 tablespoons sugar ,1/4 cup fat (butter or oil) Leaveners and Diary * * (HV) denotes Healthy Version for low fat or fat free substitution in Baking Compressed Yeast (1 cake) 1 envelope or 2 teaspoons active dry yeast 1 packet (1/4 ounce) Active Dry yeast 1 cake fresh compressed yeast 1 tablespoon fast-rising active yeast Baking Powder (1 tsp) 1/3 teaspoon baking soda plus 1/2 teaspoon cream of tartar 1/2 teaspoon baking soda plus 1/2 cup buttermilk or plain yogurt 1/4 teaspoon baking soda plus 1/3 cup molasses. When using the substitutions that include liquid, reduce other liquid in recipe accordingly Baking Soda(1 tsp) 3 tsp Baking Powder ( and reduce the acidic ingredients in the recipe. Ex Instead of buttermilk add milk) 1 tsp potassium bicarbonate Ideal substitution – 2 tsp Baking powder and omit salt in recipe Cream of tartar (1 tsp) 1 teaspoon white vinegar 1 tsp lemon juice Notes from What’s Cooking America – If cream of tartar is used along with baking soda in a cake or cookie recipe, omit both and use baking powder instead. If it calls for baking soda and cream of tarter, just use baking powder.Normally, when cream of tartar is used in a cookie, it is used together with baking soda. The two of them combined work like double-acting baking powder. When substituting for cream of tartar, you must also substitute for the baking soda. If your recipe calls for baking soda and cream of tarter, just use baking powder. One teaspoon baking powder is equivalent to 1/4 teaspoon baking soda plus 5/8 teaspoon cream of tartar. If there is additional baking soda that does not fit into the equation, simply add it to the batter. Buttermilk (1 cup) 1 tablespoon lemon juice or vinegar (white or cider) plus enough milk to make 1 cup (let stand 5-10 minutes) 1 cup plain or low fat yogurt 1 cup sour cream 1 cup water plus 1/4 cup buttermilk powder 1 cup milk plus 1 1/2 – 1 3/4 teaspoons cream of tartar Plain Yogurt (1 cup) 1 cup sour cream 1 cup buttermilk 1 cup crème fraiche 1 cup heavy whipping cream (35% butterfat) plus 1 tablespoon freshly squeezed lemon juice Whole Milk (1 cup) 1 cup fat free milk plus 1 tbsp unsaturated Oil like canola (HV) 1 cup low fat milk (HV) Heavy Cream (1 cup) 3/4 cup milk plus 1/3 cup melted butter.(whipping wont work) Sour Cream (1 cup) (pls refer also Substitutes for Fats in Baking below) 7/8 cup buttermilk or sour milk plus 3 tablespoons butter. 1 cup thickened yogurt plus 1 teaspoon baking soda. 3/4 cup sour milk plus 1/3 cup butter. 3/4 cup buttermilk plus 1/3 cup butter. Cooked sauces: 1 cup yogurt plus 1 tablespoon flour plus 2 teaspoons water. Cooked sauces: 1 cup evaporated milk plus 1 tablespoon vinegar or lemon juice. Let stand 5 minutes to thicken. Dips: 1 cup yogurt (drain through a cheesecloth-lined sieve for 30 minutes in the refrigerator for a thicker texture). Dips: 1 cup cottage cheese plus 1/4 cup yogurt or buttermilk, briefly whirled in a blender. Dips: 6 ounces cream cheese plus 3 tablespoons milk,briefly whirled in a blender. Lower fat: 1 cup low-fat cottage cheese plus 1 tablespoon lemon juice plus 2 tablespoons skim milk, whipped until smooth in a blender. Lower fat: 1 can chilled evaporated milk whipped with 1 teaspoon lemon juice. 1 cup plain yogurt plus 1 tablespoon cornstarch 1 cup plain nonfat yogurt Substitutes for Fats in Baking * * (HV) denoted Healthy Version for low fat or fat free substitution in Baking Butter (1 cup) 1 cup trans-free vegetable shortening 3/4 cups of vegetable oil (example. Canola oil) Fruit purees (example- applesauce, pureed prunes, baby-food fruits). Add it along with some vegetable oil and reduce any other sweeteners needed in the recipe since fruit purees are already sweet. 1 cup polyunsaturated margarine (HV) 3/4 cup polyunsaturated oil like safflower oil (HV) 1 cup mild olive oil (not extra virgin)(HV) Note: Butter creates the flakiness and the richness which an oil/purees cant provide. If you don’t want to compromise that much to taste, replace half the butter with the substitutions. Shortening(1 cup) 1 cup polyunsaturated margarine like Earth Balance or Smart Balance(HV) 1 cup + 2tbsp Butter ( better tasting than shortening but more expensive and has cholesterol and a higher level of saturated fat; makes cookies less crunchy, bread crusts more crispy) 1 cup + 2 tbsp Margarine (better tasting than shortening but more expensive; makes cookies less crunchy, bread crusts tougher) 1 Cup – 2tbsp Lard (Has cholesterol and a higher level of saturated fat) Oil equal amount of apple sauce stiffly beaten egg whites into batter equal parts mashed banana equal parts yogurt prune puree grated raw zucchini or seeds removed if cooked. Works well in quick breads/muffins/coffee cakes and does not alter taste pumpkin puree (if the recipe can handle the taste change) Low fat cottage cheese (use only half of the required fat in the recipe). Can give rubbery texture to the end result Silken Tofu – (use only half of the required fat in the recipe). Can give rubbery texture to the end result Equal parts of fruit juice Note: Fruit purees can alter the taste of the final product is used in large quantities. Cream Cheese (1 cup) 4 tbsps. margarine plus 1 cup low-fat cottage cheese – blended. Add few teaspoons of fat-free milk if needed (HV) Heavy Cream (1 cup) 1 cup evaporated skim milk (or full fat milk) 1/2 cup low fat Yogurt plus 1/2 low fat Cottage Cheese (HV) 1/2 cup Yogurt plus 1/2 Cottage Cheese Sour Cream (1 cup) 1 cup plain yogurt (HV) 3/4 cup buttermilk or plain yogurt plus 1/3 cup melted butter 1 cup crème fraiche 1 tablespoon lemon juice or vinegar plus enough whole milk to fill 1 cup (let stand 5-10 minutes) 1/2 cup low-fat cottage cheese plus 1/2 cup low-fat or nonfat yogurt (HV) 1 cup fat-free sour cream (HV) Note: How to Make Maple Syrup Substitute at home For 1 Cup Maple Syrup 1/2 cup granulated sugar 1 cup brown sugar, firmly packed 1 cup boiling water 1 teaspoon butter 1 teaspoon maple extract or vanilla extract Method In a heavy saucepan, place the granulated sugar and keep stirring until it melts and turns slightly brown. Alternatively in another pan, place brown sugar and water and bring to a boil without stirring. Now mix both the sugars and simmer in low heat until they come together as one thick syrup. Remove from heat, add butter and the extract. Use this in place of maple syrup. Store it in a fridge in an air tight container. Even though this was posted in their site long back, I found it helpful. So posting it for you. via chefinyou . cc image credit: flickr/zetrules

    Read the article

  • Dude, what’s up with POP Forums vNext?

    - by Jeff
    Yeah, it has been awhile. I posted v9.2 back in January, about five months ago. That’s a real change from the release pace I had there for awhile. Let me explain what’s going on. First off, in the interim, I re-launched CoasterBuzz, which required a lot of my attention for about two of those months. That’s a good thing though, because that site is just about the best test bed I could ask for. The other thing is that I committed to make the next version use ASP.NET MVC 4, which is now at the RC stage. I didn’t think much about when they’d hit their RTW point, but RC is good enough for me. To that end, there is enough change in the next version that I recently decided to make it a major version upgrade, and finish up the loose ends and science projects to make it whole. Here’s what’s in store… Mobile views: I sat on this or a long time. Originally, I was going to use jQuery Mobile, and waited and waited for a new release, but in the end, decided against using it. Sometimes buttons would unexplainably not work, I felt like I was fighting it at times, and the CSS just felt too heavy. I rolled my own mobile sugar at a fraction of the size, and I think you’ll find it easy to modify. And it’s Metro-y, of course! Re-do of background services: A number of things run in the background, and I did quite a bit of “reimagining” of that code. It’s the weirdness of running services in a Web site context, because so many folks can’t run a bona fide service on their host’s box. The biggest change here is that these service no longer start up by default. You’ll need to call a new method from global.asax called PopForumsActivation.StartServices(). This is also a precursor to running the app in a Web farm (new data layer and caching is the second part of that). I learned about this the hard way when I had three apps using the forum library code but only one was actually the forum. The services were all running three times as often with race conditions and hits on the same data. That was particularly bad for e-mail. CSS clean up: It’s still not ideal, but it’s getting better. That’s one of those things that comes with integrating to a real site… you discover all of the dumb things you did. The mobile CSS is particularly easier to live with. Bug fixes: There are a whole lot of them. Most were minor, but it’s feeling pretty solid now. So that’s where I am. I’m going to call it v10.0, and I’m going to really put forth some effort toward finishing the mobile experience and getting through the remaining bugs. The roadmap beyond that will likely not be feature oriented, but rather work on some other things, like making it run in Azure, perhaps using SQL CE, a better install experience, etc. As usual, I’ll post the latest here. Stay tuned!

    Read the article

  • Getting Things Done for Programmers

    - by thycotic
    Ben has posted about one of my favorite topics – Getting Things Done from a programmer’s perspective.   Jonathan Cogley is the CEO of Thycotic Software, an agile software services and product development company based in Washington DC.  Secret Server is our flagship web-based password management product.

    Read the article

  • Delegation of Solaris Zone Administration

    - by darrenm
    In Solaris 11 'Zone Delegation' is a built in feature. The Zones system now uses finegrained RBAC authorisations to allow delegation of management of distinct zones, rather than all zones which is what the 'Zone Management' RBAC profile did in Solaris 10.The data for this can be stored with the Zone or you could also create RBAC profiles (that can even be stored in NIS or LDAP) for granting access to specific lists of Zones to administrators.For example lets say we have zones named zoneA through zoneF and we have three admins alice, bob, carl.  We want to grant a subset of the zone management to each of them.We could do that either by adding the admin resource to the appropriate zones via zonecfg(1M) or we could do something like this with RBAC data directly: First lets look at an example of storing the data with the zone. # zonecfg -z zoneA zonecfg:zoneA> add admin zonecfg:zoneA> set user=alice zonecfg:zoneA> set auths=manage zonecfg:zoneA> end zonecfg:zoneA> commit zonecfg:zoneA> exit Now lets look at the alternate method of storing this directly in the RBAC database, but we will show all our admins and zones for this example: # usermod -P +Zone Management -A +solaris.zone.manage/zoneA alice # usermod -A +solaris.zone.login/zoneB alice # usermod -P +Zone Management-A +solaris.zone.manage/zoneB bob # usermod -A +solaris.zone.manage/zoneC bob # usermod -P +Zone Management-A +solaris.zone.manage/zoneC carl # usermod -A +solaris.zone.manage/zoneD carl # usermod -A +solaris.zone.manage/zoneE carl # usermod -A +solaris.zone.manage/zoneF carl In the above alice can only manage zoneA, bob can manage zoneB and zoneC and carl can manage zoneC through zoneF.  The user alice can also login on the console to zoneB but she can't do the operations that require the solaris.zone.manage authorisation on it.Or if you have a large number of zones and/or admins or you just want to provide a layer of abstraction you can collect the authorisation lists into an RBAC profile and grant that to the admins, for example lets great an RBAC profile for the things that alice and carl can do. # profiles -p 'Zone Group 1' profiles:Zone Group 1> set desc="Zone Group 1" profiles:Zone Group 1> add profile="Zone Management" profiles:Zone Group 1> add auths=solaris.zone.manage/zoneA profiles:Zone Group 1> add auths=solaris.zone.login/zoneB profiles:Zone Group 1> commit profiles:Zone Group 1> exit # profiles -p 'Zone Group 3' profiles:Zone Group 1> set desc="Zone Group 3" profiles:Zone Group 1> add profile="Zone Management" profiles:Zone Group 1> add auths=solaris.zone.manage/zoneD profiles:Zone Group 1> add auths=solaris.zone.manage/zoneE profiles:Zone Group 1> add auths=solaris.zone.manage/zoneF profiles:Zone Group 1> commit profiles:Zone Group 1> exit Now instead of granting carl  and aliace the 'Zone Management' profile and the authorisations directly we can just give them the appropriate profile. # usermod -P +'Zone Group 3' carl # usermod -P +'Zone Group 1' alice If we wanted to store the profile data and the profiles granted to the users in LDAP just add '-S ldap' to the profiles and usermod commands. For a documentation overview see the description of the "admin" resource in zonecfg(1M), profiles(1) and usermod(1M)

    Read the article

  • NASA’s can alert you when Space Station is visible from your backyard

    - by Gopinath
    NASA’s International Space Station(ISS) is the third most brightest object visible in the sky after Sun and Moon. If we know exactly when to look up, we will be able to spot Space Station with naked eye and it looks like bright star moving.  On the occasion of 12th anniversary of astronauts living in space station, NASA started a free services dubbed as Spot The Station, that alerts you when Space Station is visible from your backyard. Those who sign up with the free service by providing location details will get an email & text alerts couple of hours in advance so that they can have a glimpse of space station. Here is a sample alert sent to registered users SpotTheStation! Time: Wed Apr 25 7:45 PM, Visible: 4 min, Max Height: 66 degrees, Appears: WSW, Disappears NE. The space station is typically visible right at early morning or evenings when moon is the only one brightest star visible in the sky. The service is available world wide and almost 90 percent of the population on earth would be able to see clearly without using any fancy equipment. Follow the link spotthestation.nasa.gov to register for alerts. Flickr cc image: slideshow bob

    Read the article

  • GlassFish Community Event and Party at JavaOne 2011 - Oct 2, 2011

    - by arungupta
    As in the previous years (2010, 2009, 2008 (more), and 2007), the GlassFish community event and party are getting planned along with JavaOne 2011 as well. Here are the coordinates for the community event: Date: Sunday, October 2nd, 2011 Time: 12:30pm - 4:30pm Venue: Moscone West The party will be held at the regular venue of The Thirsty Bear. This is your chance to meet the core members of engineering, product management, executive management, and rest of the team. This is your (yet another) chance to voice your opinion and be heard. There will be community updates, customer testimonials, unconference, and fun activities too. Stay tuned for more details. Here are some pictures from the yesteryears: A conference badge will be required to attend the community event but the party will be open to all friends of GlassFish. So if you are in town, plan to stop by at the community event and/or the party. Stay tuned for RSVP details. Its going to be lot of fun!

    Read the article

  • GlassFish Community Event and Party at JavaOne 2011 - Oct 2, 2011

    - by arungupta
    As in the previous years (2010, 2009, 2008 (more), and 2007), the GlassFish community event and party are getting planned along with JavaOne 2011 as well. Here are the coordinates for the community event: Date: Sunday, October 2nd, 2011 Time: 12:30pm - 4:30pm Venue: Moscone West The party will be held at the regular venue of The Thirsty Bear. This is your chance to meet the core members of engineering, product management, executive management, and rest of the team. This is your (yet another) chance to voice your opinion and be heard. There will be community updates, customer testimonials, unconference, and fun activities too. Stay tuned for more details. Here are some pictures from the yesteryears: A conference badge will be required to attend the community event but the party will be open to all friends of GlassFish. So if you are in town, plan to stop by at the community event and/or the party. Stay tuned for RSVP details. Its going to be lot of fun!

    Read the article

  • Launch Webcast Q&A: Oracle WebCenter Suite 11g - The Platform for the Modern User Experience

    - by howard.beader(at)oracle.com
    Did you have a chance to watch the Oracle WebCenter Suite 11g Launch Webcast yet? Andy MacMillan presented some great information on the webcast and answered quite a few of your questions in the Q&A session as well. For your reading pleasure we have captured a number of the questions and answers and they are summarized below: Question: Can you tell me what should our Portal strategy be for integrating and extending our Oracle enterprise applications? Answer: We recommend that you look at this in two steps, the first would be to ensure that you have a good understanding of our common user experience architecture. Internally our product teams at Oracle are already investing in this quite heavily today for Fusion Applications and this is driving natural convergence from a UX strategy standpoint. The second step would be to look at how best to componentize the back office applications so that the business users across your organization can take advantage of these -- don't make it just about putting a new skin on top of what you already have from an application standpoint, instead look at how best to embed the social computing capabilities as part of the solution for your business users. Question: We are currently using the BEA WebLogic Portal now, should we stay on WLP or should we be looking at moving to WebCenter or when should we move to WebCenter? Answer: Our strategy has been called "Continue & Converge", this theme means that you can continue to use WebLogic or Plumtree portals until your organization is ready to move to WebCenter and in the mean time you can continue to deploy what you need to in your organization of WLP or WCI Portals with the full support of Oracle. In addition WebCenter Services can be leveraged for social computing to complement what you are already doing today and enable your organization to take advantage of some of the latest and greatest social computing capabilities. We have migration scripts and conversion capabilities available as well as programs where Oracle can help you evaluate your options to decide how best to move forward. WebCenter provides the best of the best capabilities and will enable you to take advantage of new capabilities that may not exist in your current portal today. In the end though it's up to you as a customer as to when you want to make the transition to Oracle WebCenter Suite. Question: Can you tell me how is Oracle leveraging WebCenter internally and for its Application and Middleware product UX strategies? Answer: Internally, Oracle is leveraging WebCenter for our employees and thus far we are seeing significant updates with our users taking advantage of the business activity streams, team spaces and collaboration capabilities. From a product strategy standpoint, our product teams are taking advantage of the common user experience architecture and leveraging WebCenter to provide social and collaborative capabilities to the Oracle Applications and providing new types of composite applications with what is coming with Fusion Applications. WebCenter also provides a common user experience across all the products in the Oracle Fusion Middleware family as well. Question: Our organization is currently using SharePoint, but we are also an Oracle Applications customer, how should we be thinking about WebCenter as we move forward? Answer: Great question. Typically, we are seeing organizations using SharePoint for its core use cases of small team collaboration and file server replacement. WebCenter can connect to SharePoint as a content source to feed into WebCenter quite easily and it leverages the robust Oracle ECM product under WebCenter as well. In addition, SharePoint team sites can be connected to WebCenter utilizing our SharePoint connector. With Oracle WebCenter though, we are really targeting business users and enterprise applications, thus affecting positive change on the processes that drive the business to improve productivity across your organization. Question: Are organizations today using WebCenter as a Web platform for externally facing public websites? Answer: Yes, we are seeing a convergence around web content management and portal types of websites with customers converting them from just broadcasting content to making it a much richer personalized experience and also exposing back-office applications as well. Web Content Management capabilities are already embedded in WebCenter so that organizations can take advantage now of the benefits a personalized web experience provides for your customers. This is simply a short summary of a few of the questions addressed on the webcast, please tune in now to learn more about Oracle WebCenter, the user experience platform for the enterprise and the web! The Oracle WebCenter Suite 11g Launch Webcast can be found here

    Read the article

  • Devoxx 2011 Trip Report + Pictures

    - by arungupta
    3350 attendees from 40 countries lived in "paradise" for 5 days last week. This paradise had 170+ rock star speakers delivering 200+ hours of technical content in about 150 sessions. And it truly was a paradise with a clear differentiation from other Java conferences. There were several Oracle speakers at the paradise covering the entire gamut of Java platform. I delivered a Java EE 6 hands-on lab (new content), showcased Java EE 7 and GlassFish 4.0 early work at the keynote, and participated in a panel to talk about Contexts and Dependency Injection. The demo in the keynote showed how to deploy a Java EE application in a managed environment. The demo showed a Conference Planner application that can be used by conference organizers to display sessions, tracks, and speaker information. This same application can be deployed and display data from JavaOne 2011 or Devoxx 2011 based upon the SQL chosen for database initialization. If javaone-sf-2011.sql is chosen for datbase initialization then the application looks like as shown: If devoxx-2011.sql is chosen then the application looks like as shown: And of course, clicking on Tracks, Speakers, Sessions shows you information from the respective conference. The complete source code for the application and detailed instructions are availaable at glassfish.org/javaone2011. In short: Download the sample app and unzip Download GlassFish build b05. Download platform-specific Load Balancer template Run "bin/install.sh" to configure GlassFish Pick javaone-sf-2011.sql or devoxx-2011.sql for database initialization You can also watch the application in action in this video: A breaking news shared at the conference was that Devoxx France is coming from April 18- 20 and 75% of the talks will be in French. Stay tuned for more details on that. I'm sure Antonio and gang will put up a great show out there! Just a tip for the first timers to Devoxx ... A bus leaves from Brussels airport to Antwerp city center between 4am - 11pm at the top of every hour, takes about 45 minutes, and costs 10 euros (only cash). Take a tram #6 (going towards Luchtbal) from Astrid station (next to the city center) and get off at the last station for Metropolis. It takes about 15 minutes. Purchase a day pass at the station using kiosks (much cheaper) or you can buy in the bus as well (about double the price). Either way, cash only. Here are a few pictures captured from the event: And the complete album here: Thank you Stephan for giving me an opportunity to speak at my first Devoxx. I hope to be back next year, just in time for Java EE 7 going final!

    Read the article

  • Goodby jQuery Templates, Hello JsRender

    - by SGWellens
    A funny thing happened on my way to the jQuery website, I blinked and a feature was dropped: jQuery Templates have been discontinued. The new pretender to the throne is JsRender. jQuery Templates looked pretty useful when they first came out. Several articles were written about them but I stayed away because being on the bleeding edge of technology is not a productive place to be. I wanted to wait until it stabilized…in retrospect, it was a serendipitous decision. This time however, I threw all caution to the wind and took a close look at JSRender. Why? Maybe I'm having a midlife crisis; I'll go motorcycle shopping tomorrow. Caveat, here is a message from the site: Warning: JsRender is not yet Beta, and there may be frequent changes to APIs and features in the coming period. Fair enough, we've been warned. The first thing we need is some data to render. Below is some JSON formatted data. Typically this will come from an asynchronous call to a web service. For simplicity, I hard coded a variable:     var Golfers = [         { ID: "1", "Name": "Bobby Jones", "Birthday": "1902-03-17" },         { ID: "2", "Name": "Sam Snead", "Birthday": "1912-05-27" },         { ID: "3", "Name": "Tiger Woods", "Birthday": "1975-12-30" }         ]; We also need some templates, I created two. Note: The script blocks have the id property set. They are needed so JsRender can locate them.     <script id="GolferTemplate1" type="text/html">         {{=ID}}: <b>{{=Name}}</b> <i>{{=Birthday}}</i> <br />     </script>       <script id="GolferTemplate2" type="text/html">         <tr>             <td>{{=ID}}</td>             <td><b>{{=Name}}</b></td>             <td><i>{{=Birthday}}</i> </td>         </tr>     </script> Including the correct JavaScript files is trivial:     <script src="Scripts/jquery-1.7.js" type="text/javascript"></script>     <script src="Scripts/jsrender.js" type="text/javascript"></script> Of course we need some place to render the output:     <div id="GolferDiv"></div><br />     <table id="GolferTable"></table> The code is also trivial:     function Test()     {         $("#GolferDiv").html($("#GolferTemplate1").render(Golfers));         $("#GolferTable").html($("#GolferTemplate2").render(Golfers));           // you can inspect the rendered html if there are poblems.         // var html = $("#GolferTemplate2").render(Golfers);     } And here's what it looks like with some random CSS formatting that I had laying around.    Not bad, I hope JsRender lasts longer than jQuery Templates. One final warning, a lot of jQuery code is ugly, butt-ugly. If you do look inside the jQuery files, you may want to cover your keyboard with some plastic in case you get vertigo and blow chunks. I hope someone finds this useful. Steve Wellens CodeProject

    Read the article

  • First impressions of Scala

    - by Scott Weinstein
    I have an idea that it may be possible to predict build success/failure based on commit data. Why Scala? It’s a JVM language, has lots of powerful type features, and it has a linear algebra library which I’ll need later. Project definition and build Neither maven or the scala build tool (sbt) are completely satisfactory. This maven **archetype** (what .Net folks would call a VS project template) mvn archetype:generate `-DarchetypeGroupId=org.scala-tools.archetypes `-DarchetypeArtifactId=scala-archetype-simple `-DremoteRepositories=http://scala-tools.org/repo-releases `-DgroupId=org.SW -DartifactId=BuildBreakPredictor gets you started right away with “hello world” code, unit tests demonstrating a number of different testing approaches, and even a ready made `.gitignore` file - nice! But the Scala version is behind at v2.8, and more seriously, compiling and testing was painfully slow. So much that a rapid edit – test – edit cycle was not practical. So Lab49 colleague Steve Levine tells me that I can either adjust my pom to use fsc – the fast scala compiler, or use sbt. Sbt has some nice features It’s fast – it uses fsc by default It has a continuous mode, so  `> ~test` will compile and run your unit test each time you save a file It’s can consume (and produce) Maven 2 dependencies the build definition file can be much shorter than the equivalent pom (about 1/5 the size, as repos and dependencies can be declared on a single line) And some real limitations Limited support for 3rd party integration – for instance out of the box, TeamCity doesn’t speak sbt, nor does IntelliJ IDEA Steeper learning curve for build steps outside the default Side note: If a language has a fast compiler, why keep the slow compiler around? Even worse, why make it the default? I choose sbt, for the faster development speed it offers. Syntax Scala APIs really like to use punctuation – sometimes this works well, as in the following map1 |+| map2 The `|+|` defines a merge operator which does addition on the `values` of the maps. It’s less useful here: http(baseUrl / url >- parseJson[BuildStatus] sure you can probably guess what `>-` does from the context, but how about `>~` or `>+`? Language features I’m still learning, so not much to say just yet. However case classes are quite usefull, implicits scare me, and type constructors have lots of power. Community A number of projects, such as https://github.com/scalala and https://github.com/scalaz/scalaz are split between github and google code – github for the src, and google code for the docs. Not sure I understand the motivation here.

    Read the article

  • LLBLGen Pro and JSON serialization

    - by FransBouma
    I accidentally removed a reply from my previous blogpost, and as this blog-engine here at weblogs.asp.net is apparently falling apart, I can't re-add it as it thought it would be wise to disable comment controls on all posts, except new ones. So I'll post the reply here as a quote and reply on it. 'Steven' asks: What would the future be for LLBLGen Pro to support JSON for serialization? Would it be worth the effort for a LLBLGenPro user to bother creating some code templates to produce additional JSON serializable classes? Or just create some basic POCO classes which could be used for exchange of client/server data and use DTO to map these back to LLBGenPro ones? If I understand the work around, it is at the expense of losing xml serialization. Well, as described in the previous post, to enable JSON serialization, you can do that with a couple of lines and some attribute assignments. However, indeed, the attributes might make the XML serialization not working, as described in the previous blogpost. This is the case if the service you're using serializes objects using the DataContract serializer: this serializer will give up to serialize the entity objects to XML as the entity objects implement IXmlSerializable and this is a no-go area for the DataContract serializer. However, if your service doesn't use a DataContract serializer, or you serialize the objects manually to Xml using an xml serializer, you're fine. When you want to switch to Xml serializing again, instead of JSON in WebApi, and you have decorated the entity classes with the data-contract attributes, you can switch off the DataContract serializer, by setting a global configuration setting: var xml = GlobalConfiguration.Configuration.Formatters.XmlFormatter; xml.UseXmlSerializer = true; This will make the WebApi use the XmlSerializer, and run the normal IXmlSerializable interface implementation.

    Read the article

  • Four New Java Champions

    - by Tori Wieldt
    Four luminaries in the Java community have been selected as new Java Champions. The are Agnes Crepet, Lars Vogel, Yara Senger and Martijn Verburg. They were selected for their technical knowledge, leadership, inspiration, and tireless work for the community. Here is how they rock the Java world: Agnes Crepet Agnes Crepet (France) is a passionate technologist with over 11 years of software engineering experience, especially in the Java technologies, as a Developer, Architect, Consultant and Trainer. She has been using Java since 1999, implementing multiple kinds of applications (from 20 days to 10000 men days) for different business fields (banking, retail, and pharmacy). Currently she is a Java EE Architect for a French pharmaceutical company, the homeopathy world leader. She is also the co-founder, with other passionate Java developers, of a software company named Ninja Squad, dedicated to Software Craftsmanship. Agnes is the leader of two Java User Groups (JUG), the Lyon JUG Duchess France and the founder of the Mix-IT Conferenceand theCast-IT Podcast, two projects about Java and Agile Development. She speaks at Java and JUG conferences around the world and regularly writes articles about the Java Ecosystem for the French print Developer magazine Programmez! and for the Duchess Blog. Follow Agnes @agnes_crepet. Lars Vogel Lars Vogel (Germany) is the founder and CEO of the vogella GmbH and works as Java, Eclipse and Android consultant, trainer and book author. He is a regular speaker at international conferences, such as EclipseCon, Devoxx, Droidcon and O'Reilly's Android Open. With more than one million visitors per month, his website vogella.com is one of the central sources for Java, Eclipse and Android programming information. Lars is committer in the Eclipse project and received in 2010 the "Eclipse Top Contributor Award" and 2012 the "Eclipse Top Newcomer Evangelist Award." Follow Lars on Twitter @vogella. Yara Senger Yara Senger (Brazil) has been a tireless Java activist in Brazil for many years. She is President of SouJava and she is an alternate representative of the group on the JCP Executive Committee. Yara has led SouJava in many initiatives, from technical events to social activities. She is co-founder and director of GlobalCode, which trains developers throughout Brazil.  Last year, she was recipient of the Duke Choice's Award, for the JHome embedded environment.  Yara is also an active speaker, giving presentations in many countries, including JavaOne SF, JavaOne Latin Ameria, JavaOne India, JFokus, and JUGs throughout Brazil. Yara is editor of InfoQ Brasil and also frequently posts at http://blog.globalcode.com.br/search/label/Yara. Follow Yara @YaraSenger. Martijn Verburg Martijn Verburg (UK) is the CTO of jClarity (a Java/JVM performance cloud tooling start-up) and has over 12 years experience as a Java/JVM technology professional and OSS mentor in a variety of organisations from start-ups to large enterprises. He is the co-leader of the London Java Community (~2800 developers) and leads the global effort for the Java User Group "Adopt a JSR" and "Adopt OpenJDK" programmes. These programmes encourage day to day Java developer involvement with OpenJDK, Java standards (JSRs), an important relationship for keeping the Java ecosystem relevant to the 9 million Java developers out there today. As a leading expert on technical team optimisation, his talks and presentations are in high demand by major conferences (JavaOne, Devoxx, OSCON, QCon) where you'll often find him challenging the industry status quo via his alter ego "The Diabolical Developer." You can read more in the OTN ariticle "Challenging the Diabolical Developer: A Conversation with JavaOne Rock Star Martijn Verburg." Follow Martijn @karianna. The Java Champions are an exclusive group of passionate Java technology and community leaders who are community-nominated and selected under a project sponsored by Oracle. Java Champions get the opportunity to provide feedback, ideas, and direction that will help Oracle grow the Java Platform. Congratulations to these new Java Champions!

    Read the article

  • Build Open JDK 7 on Mac OSX (TOTD #172)

    - by arungupta
    The complete requirements, pre-requisites, and steps to build OpenJDK 7 port on Mac OSX are described here. The steps are very clearly explained and here are the exact ones I followed on my MacBook Pro 10.7.2: Confirm the version of pre-installed Java as: > java -versionjava version "1.6.0_26"Java(TM) SE Runtime Environment (build 1.6.0_26-b03-383-11A511c)Java HotSpot(TM) 64-Bit Server VM (build 20.1-b02-383, mixed mode) Download and install Mercurial from mercurial.berkwood.com (zip bundle for 10.7 is here). It gets installed in the /usr/local/bin directory. Get the source code as (commands highlighted in bold): hg clone http://hg.openjdk.java.net/macosx-port/macosx-port destination directory: macosx-port requesting all changes adding changesets adding manifests adding file changes added 437 changesets with 364 changes to 33 files updating to branch default 31 files updated, 0 files merged, 0 files removed, 0 files unresolved cd macosx-port chmod 7555 get_source.sh ./get_source.sh # Repos:  corba jaxp jaxws langtools jdk hotspot Starting on corba Starting on jaxp Starting on jaxws Starting on langtools Starting on jdk Starting on hotspot # hg clone http://hg.openjdk.java.net/macosx-port/macosx-port/corba corba requesting all changes adding changesets adding manifests adding file changes added 396 changesets with 3275 changes to 1379 files . . . # exit code 0 # cd ./corba && hg pull -u pulling from http://hg.openjdk.java.net/macosx-port/macosx-port/corba searching for changes no changes found # exit code 0 # cd ./jaxp && hg pull -u pulling from http://hg.openjdk.java.net/macosx-port/macosx-port/jaxp searching for changes no changes found # exit code 0 Install Xcode from the App Store. Include /Developer/usr/bin in PATH. Note: JDK 1.6.0_26 ame pre-installed on my laptop and I installed Xode after that. The compilation went fine and there was no need to re-install the Java for Mac OS X as mentioned in the original steps. Build the code as: make ALLOW_DOWNLOADS=true SA_APPLE_BOOT_JAVA=true ALWAYS_PASS_TEST_GAMMA=true ALT_BOOTDIR=`/usr/libexec/java_home -v 1.6` HOTSPOT_BUILD_JOBS=`sysctl -n hw.ncpu` The final output is shown as: >>>Finished making images @ Sat Nov 19 00:59:04 WET 2011 ... >>>Finished making images @ Sat Nov 19 00:59:04 WET 2011 ...############################################################################# Leaving jdk for target(s) sanity all docs images ################################################################################## Build time 00:17:42 jdk for target(s) sanity all docs images ############################################################################### Build times ##########Target all_product_buildStart 2011-11-19 00:32:40End 2011-11-19 00:59:0400:01:46 corba00:04:07 hotspot00:00:51 jaxp00:01:21 jaxws00:17:42 jdk00:00:37 langtools00:26:24 TOTAL######################### Change the directory and verify the version: >cd build/macosx-universal/j2sdk-image/1.7.0.jdk/Contents/Home/bin >./java -version openjdk version "1.7.0-internal" OpenJDK Runtime Environment (build 1.7.0-internal-arungup_2011_11_19_00_32-b00) OpenJDK 64-Bit Server VM (build 21.0-b17, mixed mode) Now go fix some bugs, file new bugs, or discuss at the macosx-port-dev mailing list.

    Read the article

  • New Visual Studio 2012 Project Templates for DotNetNuke

    - by Chris Hammond
    Earlier this month Microsoft put the bits up for Visual Studio 2012 RTM out on MSDN Subscriber downloads, and during the first two weeks of September they will officially be releasing Visual Studio 2012. I started working with VS2012 late in the release candidate cycle, doing some DNN module development using my templates at http://christoctemplate.codeplex.com . These templates work fine in Visual Studio 2012 from my testing, but they still face the same problem that they had in Visual Studio 2008...(read more)

    Read the article

  • Nighthacking with James Gosling

    - by Yolande Poirier
    Java Evangelist Stephen Chin is back on the road for a new NightHacking Tour. He is meeting with James Gosling at Kona, Hawaii, the launch base of the Wave Glider. The Glider is an aquatic robot which communicates real-time data from the surface of the ocean. It runs on an ARM chip using Java SE Embedded.  "During this broadcast we will show some of the footage of his aquatic robots, talk through the technologies he is hacking on daily, and do Q&A with folks on the live chat" explains Stephen Chin.  Sign up for the live stream on Wednesday, October 23rd at:  8AM Hawaii Time 11AM PST 2PM EST 20:00 CET Follow @nighthackingtv for the next Nighthacking events

    Read the article

  • Migrating SQL Server Databases – The DBA’s Checklist (Part 3)

    - by Sadequl Hussain
    Continuing from Part 2 of the Database Migration Checklist series: Step 10: Full-text catalogs and full-text indexing This is one area of SQL Server where people do not seem to take notice unless something goes wrong. Full-text functionality is a specialised area in database application development and is not usually implemented in your everyday OLTP systems. Nevertheless, if you are migrating a database that uses full-text indexing on one or more tables, you need to be aware a few points. First of all, SQL Server 2005 now allows full-text catalog files to be restored or attached along with the rest of the database. However, after migration, if you are unable to look at the properties of any full-text catalogs, you are probably better off dropping and recreating it. You may also get the following error messages along the way: Msg 9954, Level 16, State 2, Line 1 The Full-Text Service (msftesql) is disabled. The system administrator must enable this service. This basically means full text service is not running (disabled or stopped) in the destination instance. You will need to start it from the Configuration Manager. Similarly, if you get the following message, you will also need to drop and recreate the catalog and populate it. Msg 7624, Level 16, State 1, Line 1 Full-text catalog ‘catalog_name‘ is in an unusable state. Drop and re-create this full-text catalog. A full population of full-text indexes can be a time and resource intensive operation. Obviously you will want to schedule it for low usage hours if the database is restored in an existing production server. Also, bear in mind that any scheduled job that existed in the source server for populating the full text catalog (e.g. nightly process for incremental update) will need to be re-created in the destination. Step 11: Database collation considerations Another sticky area to consider during a migration is the collation setting. Ideally you would want to restore or attach the database in a SQL Server instance with the same collation. Although not used commonly, SQL Server allows you to change a database’s collation by using the ALTER DATABASE command: ALTER DATABASE database_name COLLATE collation_name You should not be using this command for no reason as it can get really dangerous.  When you change the database collation, it does not change the collation of the existing user table columns.  However the columns of every new table, every new UDT and subsequently created variables or parameters in code will use the new setting. The collation of every char, nchar, varchar, nvarchar, text or ntext field of the system tables will also be changed. Stored procedure and function parameters will be changed to the new collation and finally, every character-based system data type and user defined data types will also be affected. And the change may not be successful either if there are dependent objects involved. You may get one or multiple messages like the following: Cannot ALTER ‘object_name‘ because it is being referenced by object ‘dependent_object_name‘. That is why it is important to test and check for collation related issues. Collation also affects queries that use comparisons of character-based data.  If errors arise due to two sides of a comparison being in different collation orders, the COLLATE keyword can be used to cast one side to the same collation as the other. Continues…

    Read the article

  • Java Space on Parleys

    - by Yolande Poirier
    Now available! A great selection of JavaOne 2010 and JVM Language Summit 2010 sessions as well as Oracle Technology Network TechCasts on the new Java Space on Parleys website. Oracle partnered with Stephan Janssen, founder of Parleys to make this happen. Parleys website offers a user friendly experience to view online content. You can download some of the talks to your desktop or watch them on the go on mobile devices. The current selection is a well of expertise from top Java luminaries and Oracle experts. JavaOne 2010 sessions: ·        Best practices for signing code by Sean Mullan   ·        Building software using rich client platforms by Rickard Thulin ·        Developing beyond the component libraries by Ryan Cuprak ·        Java API for keyhole markup language by Florian Bachmann ·        Avoiding common user experience anti-patterns by Burk Hufnagel ·        Accelerating Java workloads via GPUs by Gary Frost JVM Languages Summit 2010 sessions: ·      Mixed language project compilation in Eclipse by Andy Clement  ·      Gathering the threads by John Rose  ·      LINQ: language features for concurrency by Neal Gafter  ·      Improvements in OpenJDK useful for JVM languages by Eric Caspole  ·      Symmetric Multilanguage - VM Architecture by Oleg Pliss  Special interviews with Oracle experts on product innovations: ·      Ludovic Champenois, Java EE architect on Glassfish 3.1 and Java EE. ·      John Jullion-Ceccarelli and Martin Ryzl on NetBeans IDE 6.9 You can chose to listen to a section of talks using the agenda view and search for related content while watching a presentation.  Enjoy the Java content and vote on it! 

    Read the article

  • Oracle ‘In Touch’ PartnerCast – Be prepared for a year of growth!

    - by Claudia Caramelli-Oracle
    Dear partner, you are warmly welcomed to join your host David Callaghan, Senior Vice President Alliances & Channels - Oracle EMEA, for the latest headlines from the Oracle Partner Network. With a strong focus on direct partner benefit, 'In Touch' is your chance to stay up to date, share best practices and pose those burning questions to Oracle that you would like answered. In this next cast, David’s studio guests and his regional reporters will be looking at the priorities for EMEA partners and how best to grow with Oracle as we move into the new financial year. So please click here and register now!This partnercast will be held on Jul 01, 2014 from10:30am to 11:15am GMT.  Don't miss this opportunity and follow the conversation on Twitter searching for #OracleInTouch hashtag.

    Read the article

  • Thoughts on the new JavaFX by Jim Connors

    - by Jacob Lehrbaum
    First, a brief editorial if I may.  The upcoming JavaFX 2.0 platform has been getting overwhelmingly positive reaction from the community so far.  While the public sentiment seems to be cautiously optimistic, I've heard nothing but positive reactions from everyone that I've spoken to about the platform.   In fact, many of the early adopters of JavaFX have told us directly that they are very encouraged about the direction the platform is taking.One such early adopter is Oracle's own Jim Connors.  As his day job, Jim is a principal sales consultant (basically an engineer that supports Oracle's sales efforts) in the New York area.  However, Jim also co-wrote a book with Jim Clarke and Eric Bruno on JavaFX and has spoken and conducted training sessions at events like the New York Java Developer Day, the Java Road Trip, and other events.In his thoughtful editorial, Jim discusses some of the reasons why he believes the new directions Oracle is taking JavaFX make sense, including:Better developer toolsLower barriers to adoption -> better accessibility to existing Java developersImproved performanceMore flexibility (ability to use other dynamic languages, etc)To read more about Jim's thoughts on the new JavaFX, check out his blog.  Or if you want to learn more about the JavaFX platform, pick up a copy of his book.  And if you still want to use JavaFX Script, you can check out Project Visage

    Read the article

  • Integrate Microsoft Translator into your ASP.Net application

    - by sreejukg
    In this article I am going to explain how easily you can integrate the Microsoft translator API to your ASP.Net application. Why we need a translation API? Once you published a website, you are opening a channel to the global audience. So making the web content available only in one language doesn’t cover all your audience. Especially when you are offering products/services it is important to provide contents in multiple languages. Users will be more comfortable when they see the content in their native language. How to achieve this, hiring translators and translate the content to all your user’s languages will cost you lot of money, and it is not a one time job, you need to translate the contents on the go. What is the alternative, we need to look for machine translation. Thankfully there are some translator engines available that gives you API level access, so that automatically you can translate the content and display to the user. Microsoft Translator API is an excellent set of web service APIs that allows developers to use the machine translation technology in their own applications. The Microsoft Translator API is offered through Windows Azure market place. In order to access the data services published in Windows Azure market place, you need to have an account. The registration process is simple, and it is common for all the services offered through the market place. Last year I had written an article about Bing Search API, where I covered the registration process. You can refer the article here. http://weblogs.asp.net/sreejukg/archive/2012/07/04/integrate-bing-search-api-to-asp-net-application.aspx Once you registered with Windows market place, you will get your APP ID. Now you can visit the Microsoft Translator page and click on the sign up button. http://datamarket.azure.com/dataset/bing/microsofttranslator As you can see, there are several options available for you to subscribe. There is a free version available, great. Click on the sign up button under the package that suits you. Clicking on the sign up button will bring the sign up form, where you need to agree on the terms and conditions and go ahead. You need to have a windows live account in order to sign up for any service available in Windows Azure market place. Once you signed up successfully, you will receive the thank you page. You can download the C# class library from here so that the integration can be made without writing much code. The C# file name is TranslatorContainer.cs. At any point of time, you can visit https://datamarket.azure.com/account/datasets to see the applications you are subscribed to. Click on the Use link next to each service will give you the details of the application. You need to not the primary account key and URL of the service to use in your application. Now let us start our ASP.Net project. I have created an empty ASP.Net web application using Visual Studio 2010 and named it Translator Sample, any name could work. By default, the web application in solution explorer looks as follows. Now right click the project and select Add -> Existing Item and then browse to the TranslatorContainer.cs. Now let us create a page where user enter some data and perform the translation. I have added a new web form to the project with name Translate.aspx. I have placed one textbox control for user to type the text to translate, the dropdown list to select the target language, a label to display the translated text and a button to perform the translation. For the dropdown list I have selected some languages supported by Microsoft translator. You can get all the supported languages with their codes from the below link. http://msdn.microsoft.com/en-us/library/hh456380.aspx The form looks as below in the design surface of Visual Studio. All the class libraries in the windows market place requires reference to System.Data.Services.Client, let us add the reference. You can find the documentation of how to use the downloaded class library from the below link. http://msdn.microsoft.com/en-us/library/gg312154.aspx Let us evaluate the translatorContainer.cs file. You can refer the code and it is self-explanatory. Note the namespace name used (Microsoft), you need to add the namespace reference to your page. I have added the following event for the translate button. The code is self-explanatory. You are creating an object of TranslatorContainer class by passing the translation service URL. Now you need to set credentials for your Translator container object, which will be your account key. The TranslatorContainer support a method that accept a text input, source language and destination language and returns DataServiceQuery<Translation>. Let us see this working, I just ran the application and entered Good Morning in the Textbox. Selected target language and see the output as follows. It is easy to build great translator applications using Microsoft translator API, and there is a reasonable amount of translation you can perform in your application for free. For enterprises, you can subscribe to the appropriate package and make your application multi-lingual.

    Read the article

  • Inside the JCP (Java Community Process)

    - by Tori Wieldt
    There has been lots of interest lately in the Java Community Process (JCP) and how it works. Here are two great chances to learn about the JCP, both are interviews with Patrick Curran, Chair of the JCP and director of the JCP's Program Management Office: Video InterviewGet an insider view of the Java Community Process (JCP) in this Oracle Technology Network (OTN) TechCast. (See below or click here.) Justin Kestelyn, Oracle Technical Network Senior Director, sits down to have a beer with Patrick Curran and discuss the JCP. They start with the basics of what is the JCP, then describe how its governance model has evolved, addressing common misperceptions, and explain how and why developers around the world can get involved.Written Interview Janice J. Heiss interviews Patrick Curran to get his perspective on recent developments at the JCP, ongoing concerns and controversies, its history -- and its future in this article titled "The Latest on the Java Community Process: A Conversation wiht Patrick Curran."The home of the JCP is jcp.org.

    Read the article

  • ORM Profiler v1.1 has been released!

    - by FransBouma
    We've released ORM Profiler v1.1, which has the following new features: Real time profiling A real time viewer (RTV) has been added, which gives insight in the activity as it is received by the client, in two views: a chronological connection overview and an activity graph overview. This RTV allows the user to directly record to a snapshot using record buttons, pause the view, mark a range to create a snapshot from that range, and view graphs about the # of connection open actions and # of commands per second. The RTV has a 'range' in which it keeps live data and auto-cleans data that's older than this range. Screenshot of the activity graphs part of the real-time viewer: Low-level activity tab A new tab has been added to the Application tabs: the Low-level activity tab. This tab shows the main activity as it has been received over the named pipe. It can help to get insight in the chronological activity without the grouping over connections, so multiple connections at the same time per thread are easier to spot. Clicking a command will sync the rest of the application tabs, clicking a row will show the details below the splitter bar, as it is done with the other application tabs as well. Default application name in interceptor When an empty string or null is passed for application name to the Initialize method of the interceptor, the AppDomain's friendly name is used instead. Copy call stack to clipboard A call stack viewed in a grid in various parts of the UI is now copyable to the clipboard by clicking a button. Enable/Disable interceptor from the config file It's now possible to enable/disable the interceptor Initialization from the application's config file, using: Code: <appSettings> <add key="ORMProfilerEnabled" value="true"/> </appSettings> if value is true, the interceptor's Initialize method will proceed. If the value is false, the interceptor's Initialize method will not proceed and initialization won't be performed, meaning no interception will take place. If the setting is absent, or misconfigured, the Initialize method will proceed as normal and perform the initialization. Stored procedure calls for select databases are now properly displayed as a call For the databases: SQL Server, Oracle, DB2, Sybase ASA, Sybase ASE and Informix a stored procedure call is displayed as an execute/call statement and copy to clipboard works as-is. I'm especially happy with the new real-time profiling feature in ORM Profiler, which is the flagship feature for this release: it offers a completely new way to use the profiler, namely directly during debugging: you can immediately see what's going on without the necessity of a snapshot. The activity graph feature combined with the auto-cleanup of older data, allows you to keep the profiler open for a long period of time and see any spike of activity on the profiled application.

    Read the article

  • How to become a Kernel/Systems/Device driver programmer?

    - by accordionfolder
    Hello all! I currently work in a professional capacity as a software engineer working with the Android OS. We work at integrating our platform as a native daemon among other facets of the project. I primarily work in Java developing the SDK and Android applications, but get to help with the platform in C/C++. Anywho, I have a great interest to work professionally developing low level for linux. I am not unhappy in my current position and will hang around as long as the company lets me (as a matter of fact I quite enjoy working there!), but I would like to work my way that direction. I've been working through Linux Kernel Development (Robert Love) and The Linux Programming Interface (Michael Kerrisk) (In addition to strengthening my C skills at every chance I get) and casually browsing Monster and similar sites. The problem I see is, there are no entry level positions. How does one break into this field? Anytime I see "Linux Systems Programmer" or "Linux Device Driver Programmer" they all require at the minimum 5-7 years of relevant experience. They want someone who knows the ropes, not a junior level programmer (I've been working for 7 months now...). So, I'm assuming, that some of you on stackoverflow work in a professional capacity doing just what I would like to do. How did you get there? What platforms did you use to work your way there? Am I going to have a more difficult time because I have my bachelors in CSC as opposed to a computer engineer (where they would experience a bit more embedded, asm, etc)?

    Read the article

< Previous Page | 17 18 19 20 21 22 23 24 25 26 27 28  | Next Page >