Search Results

Search found 547 results on 22 pages for 'hashmap'.

Page 21/22 | < Previous Page | 17 18 19 20 21 22  | Next Page >

  • Android: OutofMemoryError: bitmap size exceeds VM budget with no reason I can see.

    - by Meymann
    Hi. I am having an OutOfMemory exception with a gallery over 600x800 pixels JPEG's. The environment I've been using Gallery with JPG images around 600x800 pixels. Since my content may be a bit more complex than just images, I have set each view to be a RelativeLayout that wraps ImageView with the JPG. In order to "speed up" the user experience I have a simple cache of 4 slots that prefetches (in a looper) about 1 image left and 1 image right to the displayed image and keeps them in a 4 slot HashMap. The platform I am using AVD of 256 RAM and 128 Heap Size, with a 600x800 screen. It also happens on an Entourage Edge target, except that with the device it's harder to debug. The problem I have been getting an exception: OutofMemoryError: bitmap size exceeds VM budget And it happens when fetching the fifth image. I have tried to change the size of my image cache, and it is still the same. The strange thing: There should not be a memory problem In order to make sure the heap limit is very far away from what I need, I have defined a dummy 8MB array in the beginning, and left it unreferenced so it's immediately dispatched. It is a member of the activity thread and is defined as following static { @SuppressWarnings("unused") byte dummy[] = new byte[ 8*1024*1024 ]; } The result is that the heap size is nearly 11MB and it's all free. Note I have added that trick after it began to crash. It makes OutOfMemory less frequent. Now, I am using DDMS. Just before the crash (does not change much after the crash), DDMS shows: ID Heap Size Allocated Free %Used #Objects 1 11.195 MB 2.428 MB 8.767 MB 21.69% 47,156 And in the detail table it shows: Type Count Total Size Smallest Largest Median Average free 1,536 8.739MB 16B 7.750MB 24B 5.825KB The largest block is 7.7MB. And yet the LogCat says: ERROR/dalvikvm-heap(1923): 925200-byte external allocation too large for this process. If you mind the relation of the median and the average, it is plausible to assume that most of the available blocks are very small. However, there is a block large enough for the bitmap, it's 7.7M. How come it is still not enough? Note: I recorded a heap trace. When looking at the amount of data allocated, it does not feel like more than 2M is allocated. It does match the free memory report by DDMS. Could it be that I experience some problem like heap-fragmentation? How do I solve/workaround the problem? Is the heap shared to all threads? Could it be that I interpret the DDMS readout in a wrong way, and there is really no 900K block to allocate? If so, can anybody please tell me where I can see that? Thanks a lot Meymann

    Read the article

  • Eclipselink factory.createEntityManager() stalls with more than one instance running

    - by Raven
    Hi, with my RCP program I have the problem that I want to have more than one copy running on my PC. The first instance runs very good. If I start the second instance, everything is fine until I want to access the database. Using this code: .. Map properties = new HashMap(); properties.put("javax.persistence.jdbc.driver", dbDriver); properties.put("javax.persistence.jdbc.url", dbUrl); properties.put("javax.persistence.jdbc.user", dbUser); properties.put("javax.persistence.jdbc.password", dbPass); try { factory = Persistence.createEntityManagerFactory( PERSISTENCE_UNIT_NAME, properties); } catch (Exception e) { System.out.println(e); } em=factory.createEntityManager(); // the second instance stops here ... with an persistence.xml of <?xml version="1.0" encoding="UTF-8"?> <persistence version="1.0" xmlns="http://java.sun.com/xml/ns/persistence" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://java.sun.com/xml/ns/persistence http://java.sun.com/xml/ns/persistence/persistence_1_0.xsd"> <persistence-unit name="default"> <provider>org.eclipse.persistence.jpa.PersistenceProvider</provider> <class>myclasshere</class> <properties> <property name="eclipselink.ddl-generation" value="create-tables" /> <property name="eclipselink.ddl-generation.output-mode" value="database" /> <property name="eclipselink.jdbc.read-connections.min" value="1" /> <property name="eclipselink.jdbc.write-connections.min" value="1" /> <property name="eclipselink.jdbc.batch-writing" value="JDBC" /> <property name="eclipselink.logging.level" value="SEVERE" /> <property name="eclipselink.logging.timestamp" value="false" /> <property name="eclipselink.logging.session" value="false" /> <property name="eclipselink.logging.thread" value="false" /> </properties> </persistence-unit> </persistence> The program stalls / does not continue in the second instance beyond this step: em=factory.createEntityManager(); Debugging the program step by step showed me, that nothing happens at this point. Perhaps the program runs into a timeout. I havent been wainting for more than 1 minute.... Do you have any clues what might cause this stall might?

    Read the article

  • Java Copy/Paste org.w3c.dom.Node between two running copies of the same program

    - by Jay
    I have a program that shows a tree representation of an XML file. Using a number of sources online I have Copy/Paste within a single instance of the program working. I am using the system Clipboard. What I need though is to be able to copy a node from one instance of the program and paste to a different instance of the same program. I have tried a number of different options, all resulting in the same behavior. When pasting from within the same application the clipboardContent contains a "transferable" object with the correct data along with an isLocal set to "true". When I perform the copy and then attempt the paste from another instance of the same program running the clipboardContent contains a "flavorsToData" HashMap and "flavors" values, the check for isDataFlavorSupported fails (never hits my custom class that represents the new flavor). I have tried using different values for the requestor object in the getContents() call. Likewise I have tried a few different ClipboardOwners for the setContent() call. Neither seem to change the behavior in any way. I am sorely tempted to convert the node that is being copied back into a textual XML format, and then on the paste convert back to the DOM model, but would rather not if possible. This class is used to define the DataFlavor and transferable object: import java.awt.datatransfer.*; import org.w3c.dom.Node; public class NodeCopyPaste implements Transferable { static public DataFlavor NodeFlavor; private DataFlavor [] supportedFlavors = {NodeFlavor}; public Node aNode; public NodeCopyPaste (Node paraNode) { aNode = paraNode; try { NodeFlavor = new DataFlavor (Class.forName ("org.w3c.dom.Node"), "Node"); } catch (ClassNotFoundException e) { e.printStackTrace (); } } public synchronized DataFlavor [] getTransferDataFlavors () { return (supportedFlavors); } public boolean isDataFlavorSupported (DataFlavor nodeFlavor) { return (nodeFlavor.equals (NodeFlavor)); } public synchronized Object getTransferData (DataFlavor nFlavor) throws UnsupportedFlavorException { if (nFlavor.equals (NodeFlavor)) return (this); else throw new UnsupportedFlavorException (nFlavor); } public void lostOwnership (Clipboard parClipboard, Transferable parTransferable) { } } I define a Clipboard object from the main application screen and then tie in copy and paste handlers for the mouse clicks: During initialization I assign the system clipboard: clippy = Toolkit.getDefaultToolkit().getSystemClipboard(); Copy Handler Node copyNode = ((CLIInfo) node.getUserObject()).DOMNode.cloneNode(true); NodeCopyPaste contents = new NodeCopyPaste(copyNode); clippy.setContents (contents, null); Paste Handler Transferable clipboardContent = clippy.getContents (null); Node clonedNode = null; if ((clipboardContent != null) && (clipboardContent.isDataFlavorSupported (NodeCopyPaste.NodeFlavor))) { try { NodeCopyPaste tempNCP = (NodeCopyPaste) clipboardContent.getTransferData (NodeCopyPaste.NodeFlavor); clonedNode = tempNCP.aNode.cloneNode(true); } catch (Exception e) { e.printStackTrace (); } Thanks!

    Read the article

  • Android - Custom Icons in ListView

    - by Ryan
    Is there any way to place a custom icon for each group item? Like for phone I'd like to place a phone, for housing I'd like to place a house. Here is my code, but it keeps throwing a Warning and locks up on me. ListView myList = (ListView) findViewById(R.id.myList); //ExpandableListAdapter adapter = new MyExpandableListAdapter(data); List<Map<String, Object>> groupData = new ArrayList<Map<String, Object>>(); Iterator it = data.entrySet().iterator(); while (it.hasNext()) { //Get the key name and value for it Map.Entry pair = (Map.Entry)it.next(); String keyName = (String) pair.getKey(); String value = pair.getValue().toString(); //Add the parents -- aka main categories Map<String, Object> curGroupMap = new HashMap<String, Object>(); groupData.add(curGroupMap); if (value == "Phone") curGroupMap.put("ICON", findViewById(R.drawable.phone)); else if (value == "Housing") curGroupMap.put("NAME", keyName); curGroupMap.put("VALUE", value); } // Set up our adapter mAdapter = new SimpleAdapter( mContext, groupData, R.layout.exp_list_parent, new String[] { "ICON", "NAME", "VALUE" }, new int[] { R.id.iconImg, R.id.rowText1, R.id.rowText2 } ); myList.setAdapter(mAdapter); The error i'm getting: 05-28 17:36:21.738: WARN/System.err(494): java.io.IOException: Is a directory 05-28 17:36:21.809: WARN/System.err(494): at org.apache.harmony.luni.platform.OSFileSystem.readImpl(Native Method) 05-28 17:36:21.838: WARN/System.err(494): at org.apache.harmony.luni.platform.OSFileSystem.read(OSFileSystem.java:158) 05-28 17:36:21.851: WARN/System.err(494): at java.io.FileInputStream.read(FileInputStream.java:319) 05-28 17:36:21.879: WARN/System.err(494): at java.io.BufferedInputStream.fillbuf(BufferedInputStream.java:183) 05-28 17:36:21.908: WARN/System.err(494): at java.io.BufferedInputStream.read(BufferedInputStream.java:346) 05-28 17:36:21.918: WARN/System.err(494): at android.graphics.BitmapFactory.nativeDecodeStream(Native Method) 05-28 17:36:21.937: WARN/System.err(494): at android.graphics.BitmapFactory.decodeStream(BitmapFactory.java:459) 05-28 17:36:21.948: WARN/System.err(494): at android.graphics.BitmapFactory.decodeFile(BitmapFactory.java:271) 05-28 17:36:21.958: WARN/System.err(494): at android.graphics.BitmapFactory.decodeFile(BitmapFactory.java:296) 05-28 17:36:21.978: WARN/System.err(494): at android.graphics.drawable.Drawable.createFromPath(Drawable.java:801) 05-28 17:36:21.988: WARN/System.err(494): at android.widget.ImageView.resolveUri(ImageView.java:501) 05-28 17:36:21.998: WARN/System.err(494): at android.widget.ImageView.setImageURI(ImageView.java:289) Thanks in advance for your help!!

    Read the article

  • Implementing EAV pattern with Hibernate for User -> Settings relationship

    - by Trevor
    I'm trying to setup a simple EAV pattern in my web app using Java/Spring MVC and Hibernate. I can't seem to figure out the magic behind the hibernate XML setup for this scenario. My database table "SETUP" has three columns: user_id (FK) setup_item setup_value The database composite key is made up of user_id | setup_item Here's the Setup.java class: public class Setup implements CommonFormElements, Serializable { private Map data = new HashMap(); private String saveAction; private Integer speciesNamingList; private User user; Logger log = LoggerFactory.getLogger(Setup.class); public String getSaveAction() { return saveAction; } public void setSaveAction(String action) { this.saveAction = action; } public User getUser() { return user; } public void setUser(User user) { this.user = user; } public Integer getSpeciesNamingList() { return speciesNamingList; } public void setSpeciesNamingList(Integer speciesNamingList) { this.speciesNamingList = speciesNamingList; } public Map getData() { return data; } public void setData(Map data) { this.data = data; } } My problem with the Hibernate setup, is that I can't seem to figure out how to map out the fact that a foreign key and the key of a map will construct the composite key of the table... this is due to a lack of experience using Hibernate. Here's my initial attempt at getting this to work: <composite-id> <key-many-to-one foreign-key="id" name="user" column="user_id" class="Business.User"> <meta attribute="use-in-equals">true</meta> </key-many-to-one> </composite-id> <map lazy="false" name="data" table="setup"> <key column="user_id" property-ref="user"/> <composite-map-key class="Command.Setup"> <key-property name="data" column="setup_item" type="string"/> </composite-map-key> <element column="setup_value" not-null="true" type="string"/> </map> Any insight into how to properly map this common scenario would be most appreciated!

    Read the article

  • Help Understanding the Mork File Format

    - by Sumit Ghosh
    Hi, I have a name value pair in a Java HashMap and this in continuation to my earlier question - here NickName=,LastModifiedDate=4ac18267,FaxNumberType=,BirthMonth=,LastName=,HomePhone=,WorkCountry=,HomePhoneType=,PreferMailFormat=0,CellularNumber=,FamilyName=,[email protected],AnniversaryMonth=,HomeCity=,WorkState=,HomeCountry=,PhoneticFirstName=,PhoneticLastName=,HomeState=,WorkAddress=,WebPage1=,WebPage2=,HomeAddress2=,WorkZipCode=,_AimScreenName=,AnniversaryYear=,WorkPhoneType=,Notes=,WorkAddress2=,WorkPhone=,Custom3=,Custom4=,Custom1=,Custom2=,PagerNumber=,AnniversaryDay=,WorkCity=,AllowRemoteContent=0,CellularNumberType=,FaxNumber=,PopularityIndex=2,FirstName=,SpouseName=,CardType=,Department=,Company=,HomeAddress=,BirthDay=,SecondEmail=,RecordKey=1,DisplayName=,DefaultEmail=,DefaultAddress=,BirthYear=,Category=,PagerNumberType=,[email protected],JobTitle=,HomeZipCode=, NickName=,LastModifiedDate=0,FaxNumberType=,BirthMonth=,LastName=Ghosh,HomePhone=+504-9907-1342,WorkCountry=USA,HomePhoneType=,PreferMailFormat=2,CellularNumber=512-282-2512,FamilyName=,[email protected],AnniversaryMonth=,HomeCity=Siguatepeque,WorkState=TX,HomeCountry=Honduras,PhoneticFirstName=,PhoneticLastName=,HomeState=Comayagua,WorkAddress=9309 HeatherwoodDr,WebPage1=http://www.mpcsol.com,WebPage2=http://www.jesuslovesthelittlechildren.org,HomeAddress2=VillaAlicia,WorkZipCode=78748,_AimScreenName=rentaprogrammer,AnniversaryYear=,WorkPhoneType=,Notes=Some notes go here.,WorkAddress2=Apartment 1,WorkPhone=512-282-2509,Custom3=Faith,Custom4=Timothy,Custom1=Hannah,Custom2=John,PagerNumber=512-282-2511,AnniversaryDay=,WorkCity=Austin,AllowRemoteContent=1,CellularNumberType=,FaxNumber=512-282-2510,PopularityIndex=0,FirstName=Sumit,SpouseName=,CardType=,Department=Programming,Company=MPC Solutions,HomeAddress=Two Blocks Past Oxen Team,BirthDay=,[email protected],RecordKey=2,DisplayName=Sumit,DefaultEmail=,DefaultAddress=,BirthYear=,Category=,PagerNumberType=,[email protected],JobTitle=Programmer,HomeZipCode=NA, NickName=,LastModifiedDate=0,FaxNumberType=,BirthMonth=,LastName=,HomePhone=,WorkCountry=,HomePhoneType=,PreferMailFormat=0,CellularNumber=,FamilyName=,[email protected],AnniversaryMonth=,HomeCity=,WorkState=,HomeCountry=,PhoneticFirstName=,PhoneticLastName=,HomeState=,WorkAddress=,WebPage1=,WebPage2=,HomeAddress2=,WorkZipCode=,_AimScreenName=,AnniversaryYear=,WorkPhoneType=,Notes=,WorkAddress2=,WorkPhone=,Custom3=,Custom4=,Custom1=,Custom2=,PagerNumber=,AnniversaryDay=,WorkCity=,AllowRemoteContent=0,CellularNumberType=,FaxNumber=,PopularityIndex=0,FirstName=,SpouseName=,CardType=,Department=,Company=,HomeAddress=,BirthDay=,SecondEmail=,RecordKey=3,DisplayName=,DefaultEmail=,DefaultAddress=,BirthYear=,Category=,PagerNumberType=,[email protected],JobTitle=,HomeZipCode=, I want to write it to a Mork file , using the Mork file format, can someone tell me how to decode the name value pair to this format given below. <(A9=3)(81=)([email protected])(80=0)(85=2)(86=4ac18267)(83=1) (87=Sumit)(88=Ghosh)(89=Sumit)([email protected])(8B [email protected])(8C=512-282-2509)(8D=+504-9907-1342)(8E=512-282-2510) (8F=512-282-2511)(90=512-282-2512)(91=Two Blocks Past Oxen Team)(92 =Villa Alicia)(93=Siguatepeque)(94=Comayagua)(95=NA)(96=Honduras) (97=9309 Heatherwood Dr)(98=Apartment 1)(99=Austin)(9A=TX)(9B=78748) (9C=USA)(9D=Programmer)(9E=Programming)(9F=MPC Solutions)(A0 =rentaprogrammer)(A1=http://www.mpcsol.com)(A2 =http://www.jesuslovesthelittlechildren.org)(A3=Hannah)(A4=John) (A5=Faith)(A6=Timothy)(A7=Some notes go here.)(A8 [email protected])> {1:^80 {(k^C0:c)(s=9)} [1:^82(^BF=3)] [1(^83=)(^84=)(^85=)(^86=)(^87=)(^88=)(^89^82)(^8A^82)(^8B=)(^8C=) (^8D=)(^8E=0)(^8F=2)(^90=0)(^91=)(^92=)(^93=)(^94=)(^95=)(^96=) (^97=)(^98=)(^99=)(^9A=)(^9B=)(^9C=)(^9D=)(^9E=)(^9F=)(^A0=)(^A1=) (^A2=)(^A3=)(^A4=)(^A5=)(^A6=)(^A7=)(^A8=)(^A9=)(^AA=)(^AB=)(^AC=) (^AD=)(^AE=)(^AF=)(^B0=)(^B1=)(^B2=)(^B3=)(^B4=)(^B5=)(^B6=)(^B7=) (^B8=)(^B9=)(^BA=)(^BB=)(^BC^86)(^BD=1)] [2(^83^87)(^84^88)(^85=)(^86=)(^87^89)(^88=)(^89^8A)(^8A^8A)(^8B^8B) (^8C=)(^8D=)(^8E=2)(^8F=0)(^90=1)(^91^8C)(^92^8D)(^93^8E)(^94^8F) (^95^90)(^96=)(^97=)(^98=)(^99=)(^9A=)(^9B^91)(^9C^92)(^9D^93)(^9E^94) (^9F=NA)(^A0^96)(^A1^97)(^A2^98)(^A3^99)(^A4=TX)(^A5^9B)(^A6^9C) (^A7^9D)(^A8^9E)(^A9^9F)(^AA^A0)(^AB=)(^AC=)(^AD=)(^AE=)(^AF=)(^B0=) (^B1=)(^B2^A1)(^B3^A2)(^B4=)(^B5=)(^B6=)(^B7^A3)(^B8^A4)(^B9^A5) (^BA^A6)(^BB^A7)(^BC=0)(^BD=2)] [3(^83=)(^84=)(^85=)(^86=)(^87=)(^88=)(^89^A8)(^8A^A8)(^8B=)(^8C=) (^8D=)(^8E=0)(^8F=0)(^90=0)(^91=)(^92=)(^93=)(^94=)(^95=)(^96=) (^97=)(^98=)(^99=)(^9A=)(^9B=)(^9C=)(^9D=)(^9E=)(^9F=)(^A0=)(^A1=) (^A2=)(^A3=)(^A4=)(^A5=)(^A6=)(^A7=)(^A8=)(^A9=)(^AA=)(^AB=)(^AC=) (^AD=)(^AE=)(^AF=)(^B0=)(^B1=)(^B2=)(^B3=)(^B4=)(^B5=)(^B6=)(^B7=) (^B8=)(^B9=)(^BA=)(^BB=)(^BC=0)(^BD=3)]}

    Read the article

  • Write binary stream to browser using PHP

    - by Dave Jarvis
    Background Trying to stream a PDF report written using iReport through PHP to the browser. The general problem is: how do you write binary data to the browser using PHP? Working Code The following code does the job, but (for many reasons) it is not as efficient as it should be (the code writes a file then sends the file contents the browser). // Load the MySQL database driver. // java( 'java.lang.Class' )->forName( 'com.mysql.jdbc.Driver' ); // Attempt a database connection. // $conn = java( 'java.sql.DriverManager' )->getConnection( "jdbc:mysql://localhost:3306/climate?user=$user&password=$password" ); // Extract parameters. // $params = new java('java.util.HashMap'); $params->put('DistrictCode', '101'); $params->put('StationCode', '0066'); $params->put('CategoryCode', '010'); // Use the fill manager to produce the report. // $fm = java('net.sf.jasperreports.engine.JasperFillManager'); $pm = $fm->fillReport($report, $params, $conn); header('Cache-Control: no-cache private'); header('Content-Description: File Transfer'); header('Content-Disposition: attachment, filename=climate-report.pdf'); header('Content-Type: application/pdf'); header('Content-Transfer-Encoding: binary'); header('Content-Length: ' . strlen( $result ) ); $path = realpath( "." ) . "/output.pdf"; $em = java('net.sf.jasperreports.engine.JasperExportManager'); $result = $em->exportReportToPdfFile($pm,$path); readfile( $path ); $conn->close(); Non-working Code To remove the slight redundancy (i.e., write directly to the browser), the following code looks like it should work, but it does not: $em = java('net.sf.jasperreports.engine.JasperExportManager'); $result = $em->exportReportToPdf($pm); header('Content-Length: ' . strlen( $result ) ); echo $result; Content is sent to the browser, but the file is corrupt (it begins with the PDF header) and cannot be read by any PDF reader. Question How can I take out the middle step of writing to the file and write directly to the browser so that the PDF is not corrupted? Thank you!

    Read the article

  • RCP applicatoon activities

    - by Peter
    I have a problem with my RCP application. First, I defined an activity in my plugin.xml: <extension point="org.eclipse.ui.activities"> <activity id="myproject.view.input.activity" name="myproject.view.input.activity"> <enabledWhen> <with variable="myproject.view.input.active"> <equals value="ENABLED"> </equals> </with> </enabledWhen> </activity> <activityPatternBinding activityId="myproject.view.input.activity" pattern="myproject.gui/myproject.view.input"> </activityPatternBinding> Then i defined my SourceProvider: <extension point="org.eclipse.ui.services"> <sourceProvider provider="myproject.util.CommandState"> <variable name="myproject.view.input.active" priorityLevel="workbench"> </variable> And, finally, my CommandState class: public class CommandState extends AbstractSourceProvider { public final static String OUTPUT_VIEW = "myproject.view.input.active"; // then goes some others variables, i just skip them // .... public final static String [] ACTIONS = {OUTPUT_VIEW /*and all others variables*/}; public final static String ENABLED = "ENABLED"; public final static String DISENABLED = "DISENABLED"; private final Map <String, String> currentState = new HashMap <String, String> (); @Override public void dispose() { } @Override public String[] getProvidedSourceNames() { return ACTIONS; } @Override public Map <String, String> getCurrentState() { return currentState; } public void setEnabled(boolean enabled, String [] commands) { String value = enabled ? ENABLED : DISENABLED; for (String command : commands) { currentState.put(command, value); fireSourceChanged(ISources.WORKBENCH, command, value); } } } In my Login window, application checks user permissions, and enable or disable views, commands, etc. with setEnabled method of CommandState. For commands it works fine, they are enabling or disabling correctly. But when i try to disable view and open perspective, that contains that view (myproject.view.input), it opened without that view, but also throws exception: !STACK 1 org.eclipse.ui.PartInitException: Could not create view: myproject.view.input at org.eclipse.ui.internal.ViewFactory.createView(ViewFactory.java:158) I can show full stacktrace if anyone want. I tried to debug my application and before i open my perspective whith that view, i checked currentState of my CommandState source provider, and all seemes to be ok: all variables values are correct and myproject.view.input.active = DISABLED Can anyone say, why exception is thrown? Thanks for any help. Sorry for big post and bad language

    Read the article

  • OneToOne JPA / Hibernate eager loading cause N+1 select

    - by Alexandre Lavoie
    I created a method to have multilingual text on different objects without creating field for each languages or tables for each objects types. Now the only problem I've got is N+1 select queries when doing a simple loading. Tables schema : CREATE TABLE `testentities` ( `keyTestEntity` int(11) NOT NULL, `keyMultilingualText` int(11) NOT NULL, PRIMARY KEY (`keyTestEntity`) ) ENGINE=MyISAM AUTO_INCREMENT=0 DEFAULT CHARSET=utf8; CREATE TABLE `common_multilingualtexts` ( `keyMultilingualText` int(11) NOT NULL auto_increment, PRIMARY KEY (`keyMultilingualText`) ) ENGINE=MyISAM AUTO_INCREMENT=0 DEFAULT CHARSET=utf8; CREATE TABLE `common_multilingualtexts_values` ( `languageCode` varchar(5) NOT NULL, `keyMultilingualText` int(11) NOT NULL, `value` text, PRIMARY KEY (`languageCode`,`keyMultilingualText`) ) ENGINE=MyISAM DEFAULT CHARSET=utf8; MultilingualText.java @Entity @Table(name = "common_multilingualtexts") public class MultilingualText implements Serializable { private Integer m_iKeyMultilingualText; private Map<String, String> m_lValues = new HashMap<String, String>(); public void setKeyMultilingualText(Integer p_iKeyMultilingualText) { m_iKeyMultilingualText = p_iKeyMultilingualText; } @Id @GeneratedValue @Column(name = "keyMultilingualText") public Integer getKeyMultilingualText() { return m_iKeyMultilingualText; } public void setValues(Map<String, String> p_lValues) { m_lValues = p_lValues; } @ElementCollection(fetch = FetchType.EAGER) @CollectionTable(name = "common_multilingualtexts_values", joinColumns = @JoinColumn(name = "keyMultilingualText")) @MapKeyColumn(name = "languageCode") @Column(name = "value") public Map<String, String> getValues() { return m_lValues; } public void put(String p_sLanguageCode, String p_sValue) { m_lValues.put(p_sLanguageCode,p_sValue); } public String get(String p_sLanguageCode) { if(m_lValues.containsKey(p_sLanguageCode)) { return m_lValues.get(p_sLanguageCode); } return null; } } And it is used like this on a object (having a foreign key to the multilingual text) : @Entity @Table(name = "testentities") public class TestEntity implements Serializable { private Integer m_iKeyEntity; private MultilingualText m_oText; public void setKeyEntity(Integer p_iKeyEntity) { m_iKeyEntity = p_iKeyEntity; } @Id @GeneratedValue @Column(name = "keyEntity") public Integer getKeyEntity() { return m_iKeyEntity; } public void setText(MultilingualText p_oText) { m_oText = p_oText; } @OneToOne(cascade = CascadeType.ALL) @JoinColumn(name = "keyText") public MultilingualText getText() { return m_oText; } } Now, when doing a simple HQL query : from TestEntity, I get a query selecting TestEntity's and one query for each MultilingualText that need to be loaded on each TestEntity. I've searched a lot and found absolutely no solutions. I have tested : @Fetch(FetchType.JOIN) optional = false @ManyToOne instead of @OneToOne Now I am out of idea!

    Read the article

  • Dependency injection: Scoping by region (Guice, Spring, Whatever)

    - by Itay
    Here's a simplified version of my needs. I have a program where every B object has its own C and D object, injected through Guice. In addition an A object is injected into every C and D objects. What I want: that for each B object, its C and D objects will be injected with the same A object. Specifically, I want the output of the program (below) to be: Created C0 with [A0] Created D0 with [A0] Created B0 with [C0, D0] Created C1 with [A1] Created D1 with [A1] Created B1 with [C1, D1] Where it currently produces the following output: Created C0 with [A0] Created D0 with [A1] <-- Should be A0 Created B0 with [C0, D0] Created C1 with [A2] <-- Should be A1 Created D1 with [A3] <-- Should be A1 Created B1 with [C1, D1] I am expecting DI containers to allow this kind of customization but so far I had no luck in finding a solution. Below is my Guice-based code, but a Spring-based (or other DI containers-based) solution is welcome. import java.util.Arrays; import com.google.inject.*; public class Main { public static class Super { private static Map<Class<?>,Integer> map = new HashMap<Class<?>,Integer>(); private Integer value; public Super(Object... args) { value = map.get(getClass()); value = value == null ? 0 : ++value; map.put(getClass(), value); if(args.length > 0) System.out.println("Created " + this + " with " + Arrays.toString(args)); } @Override public final String toString() { return "" + getClass().getSimpleName().charAt(0) + value; } } public interface A { } public static class AImpl extends Super implements A { } public interface B { } public static class BImpl extends Super implements B { @Inject public BImpl(C c, D d) { super(c,d); } } public interface C { } public static class CImpl extends Super implements C { @Inject public CImpl(A a) { super(a); } } public interface D { } public static class DImpl extends Super implements D { @Inject public DImpl(A a) { super(a); } } public static class MyModule extends AbstractModule { @Override protected void configure() { bind(A.class).to(AImpl.class); bind(B.class).to(BImpl.class); bind(C.class).to(CImpl.class); bind(D.class).to(DImpl.class); } } public static void main(String[] args) { Injector inj = Guice.createInjector(new MyModule()); inj.getInstance(B.class); inj.getInstance(B.class); } }

    Read the article

  • HttpPost request unsuccessful

    - by The Thom
    I have written a web service and am now writing a tester to perform integration testing from the outside. I am writing my tester using apache httpclient 4.3. Based on the code here: http://hc.apache.org/httpcomponents-client-4.3.x/quickstart.html and here: http://hc.apache.org/httpcomponents-client-4.3.x/tutorial/html/fundamentals.html#d5e186 I have written the following code. Map<String, String> parms = new HashMap<>(); parms.put(AirController.KEY_VALUE, json); postUrl(SERVLET, parms); ... protected String postUrl(String servletName, Map<String, String> parms) throws AirException{ String url = rootUrl + servletName; HttpPost post = new HttpPost(url); List<NameValuePair> nvps = new ArrayList<NameValuePair>(); for(Map.Entry<String, String> entry:parms.entrySet()){ BasicNameValuePair parm = new BasicNameValuePair(entry.getKey(), entry.getValue()); nvps.add(parm); } try { post.setEntity(new UrlEncodedFormEntity(nvps)); } catch (UnsupportedEncodingException use) { String msg = "Invalid parameters:" + parms; throw new AirException(msg, use); } CloseableHttpResponse response; try { response = httpclient.execute(post); } catch (IOException ioe) { throw new AirException(ioe); } String result; if(HttpStatus.SC_OK == response.getStatusLine().getStatusCode()){ result = processResponse(response); } else{ String msg = MessageFormat.format("Invalid status code {0} received from query {1}.", new Object[]{response.getStatusLine().getStatusCode(), url}); throw new AirException(msg); } return result; } This code successfully reaches my servlet. In my servlet, I have (using Spring's AbstractController): protected ModelAndView post(HttpServletRequest request, HttpServletResponse response) { String json = String.valueOf(request.getParameter(KEY_VALUE)); if(json.equals("null")){ log.info("Received null value."); response.setStatus(406); return null; } And this code always falls into the null parameter code and returns a 406. I'm sure I'm missing something simple, but can't see what it is.

    Read the article

  • question about book example - Java Concurrency in Practice, Listing 4.12

    - by mike
    Hi, I am working through an example in Java Concurrency in Practice and am not understanding why a concurrent-safe container is necessary in the following code. I'm not seeing how the container "locations" 's state could be modified after construction; so since it is published through an 'unmodifiableMap' wrapper, it appears to me that an ordinary HashMap would suffice. EG, it is accessed concurrently, but the state of the map is only accessed by readers, no writers. The value fields in the map are syncronized via delegation to the 'SafePoint' class, so while the points are mutable, the keys for the hash, and their associated values (references to SafePoint instances) in the map never change. I think my confusion is based on what precisely the state of the collection is in the problem. Thanks!! -Mike Listing 4.12, Java Concurrency in Practice, (this listing available as .java here, and also in chapter form via google) /////////////begin code @ThreadSafe public class PublishingVehicleTracker { private final Map<String, SafePoint> locations; private final Map<String, SafePoint> unmodifiableMap; public PublishingVehicleTracker( Map<String, SafePoint> locations) { this.locations = new ConcurrentHashMap<String, SafePoint>(locations); this.unmodifiableMap = Collections.unmodifiableMap(this.locations); } public Map<String, SafePoint> getLocations() { return unmodifiableMap; } public SafePoint getLocation(String id) { return locations.get(id); } public void setLocation(String id, int x, int y) { if (!locations.containsKey(id)) throw new IllegalArgumentException( "invalid vehicle name: " + id); locations.get(id).set(x, y); } } // monitor protected helper-class @ThreadSafe public class SafePoint { @GuardedBy("this") private int x, y; private SafePoint(int[] a) { this(a[0], a[1]); } public SafePoint(SafePoint p) { this(p.get()); } public SafePoint(int x, int y) { this.x = x; this.y = y; } public synchronized int[] get() { return new int[] { x, y }; } public synchronized void set(int x, int y) { this.x = x; this.y = y; } } ///////////end code

    Read the article

  • assign member based on string value

    - by Aperion
    I need start off with code because I am not sure what terminology to use. Lets say I have the following code: class Node { public: void Parse(rapidxml::xml_node<> *node) { for (rapidxml::xml_attribute<> *attr = node->first_attribute(); attr; attr = attr->next_attribute()) { std::stringstream converter; converter << attr->value(); if( !strcmp(attr->name(), "x") ) converter >> x; else if( !strcmp(attr->name(),"y") ) converter >> y; else if( !strcmp(attr->name(), "z") ) converter >> z; } } private: float x; float y; float z; }; What I can't stand is the repetition of if( !strcmp(attr-name(), "x") ) converter x; I feel that this is error prone and monotonous, but I cannot think of another way to map a string value to a member assignment. What are some other approaches one can take to avoid code such as this? The only other possible alternative I could think of was to use a hashmap, but that runs into problems with callbacks This is the best I could up with but it's not as flexible as I'd like: class Node { Node() : x(0.0f), y(0.0f), z(0.0f) { assignmentMap["x"] = &x; assignmentMap["y"] = &y; assignmentMap["z"] = &z; } public: void Parse(rapidxml::xml_node<> *node) { for (rapidxml::xml_attribute<> *attr = node->first_attribute(); attr; attr = attr->next_attribute()) { if( !attr->name() ) continue; std::stringstream converter; converter << attr->value(); converter >> *assignmentMap[attr->name()]; } } private: float x; float y; float z; std::map<std::string, float*> assignmentMap; };

    Read the article

  • Memory Leak with Swing Drag and Drop

    - by tom
    I have a JFrame that accepts top-level drops of files. However after a drop has occurred, references to the frame are held indefinitely inside some Swing internal classes. I believe that disposing of the frame should release all of its resources, so what am I doing wrong? Example import java.awt.datatransfer.DataFlavor; import java.io.File; import java.util.List; import javax.swing.JFrame; import javax.swing.JLabel; import javax.swing.TransferHandler; public class DnDLeakTester extends JFrame { public static void main(String[] args) { new DnDLeakTester(); //Prevent main from returning or the jvm will exit while (true) { try { Thread.sleep(10000); } catch (InterruptedException e) { } } } public DnDLeakTester() { super("I'm leaky"); add(new JLabel("Drop stuff here")); setTransferHandler(new TransferHandler() { @Override public boolean canImport(final TransferSupport support) { return (support.isDrop() && support .isDataFlavorSupported(DataFlavor.javaFileListFlavor)); } @Override public boolean importData(final TransferSupport support) { if (!canImport(support)) { return false; } try { final List<File> files = (List<File>) support.getTransferable().getTransferData(DataFlavor.javaFileListFlavor); for (final File f : files) { System.out.println(f.getName()); } } catch (Exception e) { e.printStackTrace(); } return true; } }); setDefaultCloseOperation(DISPOSE_ON_CLOSE); pack(); setVisible(true); } } To reproduce, run the code and drop some files on the frame. Close the frame so it's disposed of. To verify the leak I take a heap dump using JConsole and analyse it with the Eclipse Memory Analysis tool. It shows that sun.awt.AppContext is holding a reference to the frame through its hashmap. It looks like TransferSupport is at fault. What am I doing wrong? Should I be asking the DnD support code to clean itself up somehow? I'm running JDK 1.6 update 19.

    Read the article

  • Java - is this an idiom or pattern, behavior classes with no state

    - by Berlin Brown
    I am trying to incorporate more functional programming idioms into my java development. One pattern that I like the most and avoids side effects is building classes that have behavior but they don't necessarily have any state. The behavior is locked into the methods but they only act on the parameters passed in. The code below is code I am trying to avoid: public class BadObject { private Map<String, String> data = new HashMap<String, String>(); public BadObject() { data.put("data", "data"); } /** * Act on the data class. But this is bad because we can't * rely on the integrity of the object's state. */ public void execute() { data.get("data").toString(); } } The code below is nothing special but I am acting on the parameters and state is contained within that class. We still may run into issues with this class but that is an issue with the method and the state of the data, we can address issues in the routine as opposed to not trusting the entire object. Is this some form of idiom? Is this similar to any pattern that you use? public class SemiStatefulOOP { /** * Private class implies that I can access the members of the <code>Data</code> class * within the <code>SemiStatefulOOP</code> class and I can also access * the getData method from some other class. * * @see Test1 * */ class Data { protected int counter = 0; public int getData() { return counter; } public String toString() { return Integer.toString(counter); } } /** * Act on the data class. */ public void execute(final Data data) { data.counter++; } /** * Act on the data class. */ public void updateStateWithCallToService(final Data data) { data.counter++; } /** * Similar to CLOS (Common Lisp Object System) make instance. */ public Data makeInstance() { return new Data(); } } // End of Class // Issues with the code above: I wanted to declare the Data class private, but then I can't really reference it outside of the class: I can't override the SemiStateful class and access the private members. Usage: final SemiStatefulOOP someObject = new SemiStatefulOOP(); final SemiStatefulOOP.Data data = someObject.makeInstance(); someObject.execute(data); someObject.updateStateWithCallToService(data);

    Read the article

  • Read from file in eclipse

    - by Buzkie
    I'm trying to read from a text file to input data to my java program. However, eclipse continuosly gives me a Source not found error no matter where I put the file. I've made an additional sources folder in the project directory, the file in question is in both it and the bin file for the project and it still can't find it. I even put a copy of it on my desktop and tried pointing eclipse there when it asked me to browse for the source lookup path. No matter what I do it can't find the file. here's my code in case it's pertinent: System.out.println(System.getProperty("user.dir")); File file = new File("file.txt"); Scanner scanner = new Scanner(file); in addition, it says the user directory is the project directory and there is a copy there too. I have no clue what to do. Thanks, Alex after attempting the suggestion below and refreshing again, I was greeted by a host of errors. FileNotFoundException(Throwable).<init>(String) line: 195 FileNotFoundException(Exception).<init>(String) line: not available FileNotFoundException(IOException).<init>(String) line: not available FileNotFoundException.<init>(String) line: not available URLClassPath$JarLoader.getJarFile(URL) line: not available URLClassPath$JarLoader.access$600(URLClassPath$JarLoader, URL) line: not available URLClassPath$JarLoader$1.run() line: not available AccessController.doPrivileged(PrivilegedExceptionAction<T>) line: not available [native method] URLClassPath$JarLoader.ensureOpen() line: not available URLClassPath$JarLoader.<init>(URL, URLStreamHandler, HashMap) line: not available URLClassPath$3.run() line: not available AccessController.doPrivileged(PrivilegedExceptionAction<T>) line: not available [native method] URLClassPath.getLoader(URL) line: not available URLClassPath.getLoader(int) line: not available URLClassPath.access$000(URLClassPath, int) line: not available URLClassPath$2.next() line: not available URLClassPath$2.hasMoreElements() line: not available ClassLoader$2.hasMoreElements() line: not available CompoundEnumeration<E>.next() line: not available CompoundEnumeration<E>.hasMoreElements() line: not available ServiceLoader$LazyIterator.hasNext() line: not available ServiceLoader$1.hasNext() line: not available LocaleServiceProviderPool$1.run() line: not available AccessController.doPrivileged(PrivilegedExceptionAction<T>) line: not available [native method] LocaleServiceProviderPool.<init>(Class<LocaleServiceProvider>) line: not available LocaleServiceProviderPool.getPool(Class<LocaleServiceProvider>) line: not available NumberFormat.getInstance(Locale, int) line: not available NumberFormat.getNumberInstance(Locale) line: not available Scanner.useLocale(Locale) line: not available Scanner.<init>(Readable, Pattern) line: not available Scanner.<init>(ReadableByteChannel) line: not available Scanner.<init>(File) line: not available code used: System.out.println(System.getProperty("user.dir")); File file = new File(System.getProperty("user.dir") + "/file.txt"); Scanner scanner = new Scanner(file);

    Read the article

  • Android Thumbnail Loading Problem

    - by y ramesh rao
    I'm using a thumbnail loader in my project the one mentioned below. The problem is that the it loads all the thumbnails properly except the ones who's size is of about 40K. When our back end is giving that sort of thumbnails are not generated and sometimes this eventually leads to a Crash too. What m I supposed to do with this ? public class ThumbnailManager { private final Map<String, Bitmap> drawableMap; public static Context context; private Resources res; private int thumbnail_size; public ThumbnailManager() { drawableMap = new HashMap<String, Bitmap >(); res = new Resources(context.getAssets(), null, null); thumbnail_size = res.getInteger(R.ThumbnailManager.THUMBNAIL_SIZE); } public Bitmap fetchBitmap(String urlString) { if(drawableMap.containsKey(urlString)) { return (drawableMap.get(urlString)); } //Log.d(getClass().getSimpleName(), " Image URL :: "+ urlString); try { InputStream is = fetch(urlString); android.util.Log.v("ThumbnailManager", "ThumbnailManager " + urlString); drawableMap.put(urlString, BitmapFactory.decodeStream(is));//Bitmap.createScaledBitmap(BitmapFactory.decodeStream(is), thumbnail_size, thumbnail_size, false)); return drawableMap.get(urlString); } catch(Exception e) { android.util.Log.v("EXCEPTION", "EXCEPTION" + urlString); return null; } } public void fetchBitmapOnThread(final String urlString, final ImageView imageView) { if(drawableMap.containsKey(urlString)) { imageView.setImageBitmap(drawableMap.get(urlString)); return; } if(urlString.compareTo("AUDIO") == 0) { Bitmap audioThumb = BitmapFactory.decodeResource(context.getResources(), R.drawable.timeline_audio_thumb); drawableMap.put(urlString, Bitmap.createScaledBitmap(audioThumb, thumbnail_size, thumbnail_size, false)); imageView.setImageBitmap(drawableMap.get(urlString)); return; } final Handler handler = new Handler() { public void handleMessage(Message message) { imageView.setImageBitmap((Bitmap) message.obj); } }; Thread thread = new Thread() { public void run() { Bitmap urlBitmap = fetchBitmap(urlString); Message message = handler.obtainMessage(1, urlBitmap); handler.sendMessage(message); } }; thread.start(); } public InputStream fetch(String urlString) throws IOException, MalformedURLException { final URL url = new URL(urlString); final URLConnection conn = url.openConnection(); HttpURLConnection httpConn = (HttpURLConnection) conn; httpConn.setAllowUserInteraction(true); httpConn.setInstanceFollowRedirects(true); httpConn.setRequestMethod("GET"); httpConn.connect(); return(conn.getInputStream()); } }

    Read the article

  • How to access the map returned by IParameterValues::getParameterValues()?

    - by Hua
    I declared a command and a commandParameter for this command. I specified the "values" of this commandParameter as a class implemented by myself. The implementation of this class is below, public class ParameterValues implements IParameterValues { @Override public Map<String, Double> getParameterValues() { // TODO Auto-generated method stub Map<String, Double> values = new HashMap<String, Double>(2); values.put("testParam", 1.1239); values.put("AnotherTest", 4.1239); return values; } } The implementation of the handler of this command is blow, public class testHandler extends AbstractHandler implements IHandler { private static String PARAMETER_ID = "my.parameter1"; @Override public Object execute(ExecutionEvent event) throws ExecutionException { String value = event.getParameter(PARAMETER_ID); MessageDialog.openInformation(HandlerUtil.getActiveShell(event), "Test", "Parameter ID: " + PARAMETER_ID + "\nValue: " + value); return null; } } Now, I contribute the command to a menu, <menuContribution locationURI="menu:org.eclipse.ui.main.menu"> <menu id="my.edit" label="Edit"> <command commandId="myCommand.test" label="Test1"> <parameter name="my.parameter1" value="testParam"> </parameter> </command> Since I specified a "values" class for the commandParater, I expect when the menu is clicked, this code line "String value = event.getParameter(PARAMETER_ID);" in the handler class returns 1.1239 instead of "testParam". But, I still see that code line returns "testParam". What's the problem? How could I access the map returned by getParameterValues()? By the way, following menu declaration still works even I don't define "ppp" in the map. <menuContribution locationURI="menu:org.eclipse.ui.main.menu"> <menu id="my.edit" label="Edit"> <command commandId="myCommand.test" label="Test1"> <parameter name="my.parameter1" value="ppp"> </parameter> </command> Thanks!

    Read the article

  • JAVA: Can't get context parameters in Filter

    - by DaTval
    Hello, I have a filter and parameters in web.xml web.xml is like this: <filter> <description> </description> <display-name>AllClassFilter</display-name> <filter-name>AllClassFilter</filter-name> <filter-class>com.datval.homework.AllClassFilter</filter-class> <init-param> <param-name>DB_URL</param-name> <param-value>jdbc:derby:C:/Users/admin/workspace/homework03/homework/databases/StudentsDB;create=true</param-value> </init-param> <init-param> <param-name>DB_DIALECT</param-name> <param-value>org.hibernate.dialect.DerbyDialect</param-value> </init-param> <init-param> <param-name>DB_DRIVER</param-name> <param-value>org.apache.derby.jdbc.EmbeddedDriver</param-value> </init-param> </filter> mapping is working well. But I can't get this parameters in my filter. public void init(FilterConfig config) throws ServletException { // TODO Auto-generated method stub debugMessage = config.getInitParameter("debugMessage"); ctx = config.getServletContext(); } public void doFilter(ServletRequest request, ServletResponse response, FilterChain chain) throws IOException, ServletException { // TODO Auto-generated method stub // place your code here ctx.log("Start - " + debugMessage); String myDbUrl = ctx.getInitParameter("DB_URL"); String DB_DIALECT = ctx.getInitParameter("DB_DIALECT"); String DB_DRIVER = ctx.getInitParameter("DB_DRIVER"); Map<String,String> pr = new HashMap<String,String>(); pr.put("hibernate.connection.url", myDbUrl); pr.put("hibernate.dialect", DB_DIALECT); pr.put("hibernate.connection.driver_class", DB_DRIVER); EntityManagerFactory emf = Persistence.createEntityManagerFactory("students",pr); EntityManager em = emf.createEntityManager(); request.setAttribute("em", em); chain.doFilter(request, response); em.close(); ctx.log("end - " + debugMessage); } I have checked and myDbUrl is null. What I'm doing wrong? Any idea? Sorry about code, I will change it later :)

    Read the article

  • Why is Dictionary.First() so slow?

    - by Rotsor
    Not a real question because I already found out the answer, but still interesting thing. I always thought that hash table is the fastest associative container if you hash properly. However, the following code is terribly slow. It executes only about 1 million iterations and takes more than 2 minutes of time on a Core 2 CPU. The code does the following: it maintains the collection todo of items it needs to process. At each iteration it takes an item from this collection (doesn't matter which item), deletes it, processes it if it wasn't processed (possibly adding more items to process), and repeats this until there are no items to process. The culprit seems to be the Dictionary.Keys.First() operation. The question is why is it slow? Stopwatch watch = new Stopwatch(); watch.Start(); HashSet<int> processed = new HashSet<int>(); Dictionary<int, int> todo = new Dictionary<int, int>(); todo.Add(1, 1); int iterations = 0; int limit = 500000; while (todo.Count > 0) { iterations++; var key = todo.Keys.First(); var value = todo[key]; todo.Remove(key); if (!processed.Contains(key)) { processed.Add(key); // process item here if (key < limit) { todo[key + 13] = value + 1; todo[key + 7] = value + 1; } // doesn't matter much how } } Console.WriteLine("Iterations: {0}; Time: {1}.", iterations, watch.Elapsed); This results in: Iterations: 923007; Time: 00:02:09.8414388. Simply changing Dictionary to SortedDictionary yields: Iterations: 499976; Time: 00:00:00.4451514. 300 times faster while having only 2 times less iterations. The same happens in java. Used HashMap instead of Dictionary and keySet().iterator().next() instead of Keys.First().

    Read the article

  • c++ property class structure

    - by Without me Its just Aweso
    I have a c++ project being developed in QT. The problem I'm running in to is I am wanting to have a single base class that all my property classes inherit from so that I can store them all together. Right now I have: class AbstractProperty { public: AbstractProperty(QString propertyName); virtual QString toString() const = 0; virtual QString getName() = 0; virtual void fromString(QString str) = 0; virtual int toInteger() = 0; virtual bool operator==(const AbstractProperty &rightHand) = 0; virtual bool operator!=(const AbstractProperty &rightHand) = 0; virtual bool operator<(const AbstractProperty &rightHand) = 0; virtual bool operator>(const AbstractProperty &rightHand) = 0; virtual bool operator>=(const AbstractProperty &rightHand) = 0; virtual bool operator<=(const AbstractProperty &rightHand) = 0; protected: QString name; }; then I am implementing classes such as PropertyFloat and PropertyString and providing implementation for the comparator operators based on the assumption that only strings are being compared with strings and so on. However the problem with this is there would be no compiletime error thrown if i did if(propertyfloat a < propertystring b) however my implementation of the operators for each derived class relies on them both being the same derived class. So my problem is I cant figure out how to implement a property structure so that I can have them all inherit from some base type but code like what I have above would throw a compile time error. Any ideas on how this can be done? For those familiar with QT I tried using also a implementation with QVariant however QVariant doesn't have operators < and defined in itself only in some of its derived classes so it didn't work out. What my end goal is, is to be able to generically refer to properties. I have an element class that holds a hashmap of properties with string 'name' as key and the AbstractProperty as value. I want to be able to generically operate on the properties. i.e. if I want to get the max and min values of a property given its string name I have methods that are completely generic that will pull out the associated AbstactProperty from each element and find the max/min no matter what the type is. so properties although initially declared as PropertyFloat/PropertyString they will be held generically.

    Read the article

  • When i add a bitmap to an array list the last element is duplicated in previous indexes

    - by saxofone2
    I'm trying to implement a personal way of undo/redo in a finger paint-like app. I have in synthesis three objects: the Main class (named ScorePadActivity), the relative Main Layout (with buttons, menus, etc, as well as a View object where I create my drawings), and a third object named ArrayList where i'm writing the undo/redo code. The problem is, when I press the undo button nothing happens, but if I draw anything again "one-time" and press undo, the screen is updated. If I draw many times, to see any changes happen on screen I have to press the undo button the same number of times I have drawn. Seems like (as in title) when I add a bitmap to the array list the last element is duplicated in previous indexes, and for some strange reason, everytime I press the Undo Button, the system is ok for one time, but starts to duplicate until the next undo. The index increase is verified with a series of System.out.println inserted in code. Now when I draw something on screen, the array list is updated with the code inserted after the invocation of touchup(); method in motionEvent touch_up(); } this.arrayClass.incrementArray(mBitmap); mPath.rewind(); invalidate(); and in ArrayList activity; public void incrementArray(Bitmap mBitmap) { this._mBitmap=mBitmap; _size=undoArray.size(); undoArray.add(_size, _mBitmap); } (All Logs removed for clear reading) The undo button in ScorePadActivity calls the undo method in View activity: Button undobtn= (Button)findViewById(R.id.undo); undobtn.setOnClickListener(new View.OnClickListener() { public void onClick(View v) { mView.undo(); } }); in View activity: public void undo() { this.mBitmap= arrayClass.undo(); mCanvas = new Canvas(mBitmap); mPath.rewind(); invalidate(); } that calls the relative undo method in ArrayList activity: public Bitmap undo() { // TODO Auto-generated method stub _size=undoArray.size(); if (_size>1) { undoArray.remove(_size-1); _size=undoArray.size(); _mBitmap = ((Bitmap) undoArray.get(_size-1)).copy(Bitmap.Config.ARGB_8888,true); } return _mBitmap; } return mBitmap and invalidate: Due to my bad English I have made a scheme to make the problem more clear: I have tried with HashMap, with a simple array, I have tried to change mPath.rewind(); with reset();, new Path(); etc but nothing. Why? Sorry for the complex answer, i want give you a great thanks in advance. Best regards

    Read the article

  • How can i use the Orientation correct for images

    - by user3578109
    I´m learning android/java by myself @the moment and i have a problem with a part of my app i´m learning on. I made the code with help of the www and my problem is that if i open an image from the gallery it´s send to the edit activity but in the activity pictures what are made in portrait mode are displayed always wrong (90° to the right side).... The codes are Matrix private Bitmap rotateBitmapToOrientation(Bitmap b, int orientation){ Matrix matrix = new Matrix(); matrix.postRotate(orientation); Canvas offscreenCanvas = new Canvas(); offscreenCanvas.drawBitmap(b, matrix, null); return b; } and the other one @Override protected void onActivityResult(int requestCode, int resultCode, Intent data) { super.onActivityResult(requestCode, resultCode, data); switch (requestCode) { case PICK_IMAGE_FROM_GALLERY: { if (resultCode == RESULT_OK) { Log.d(TAG, "Got Picture!"); Log.d(TAG,"File type - " + data.getType()); Uri photoUri = data.getData(); if (photoUri != null) { try { String[] filePathColumn = {MediaStore.Images.Media.DATA}; String[] orientationColumn = {MediaStore.Images.Media.ORIENTATION}; int orientation = -1; Cursor cursor = getContentResolver().query(photoUri, filePathColumn, null, null, null); cursor.moveToFirst(); int columnIndex = cursor.getColumnIndex(filePathColumn[0]); String filePath = cursor.getString(columnIndex); cursor.close(); cursor = getContentResolver().query(photoUri, orientationColumn, null, null, null); if(cursor != null && cursor.moveToFirst()){ orientation = cursor.getInt(cursor.getColumnIndex(orientationColumn[0])); } cursor.close(); HashMap<String, Integer> pRes = this.getImageResolutionSetting(); Bitmap shrunkenBitmap = FileUtilsHelper.shrinkBitmap(filePath, pRes.get("width"), pRes.get("height")); shrunkenBitmap = rotateBitmapToOrientation(shrunkenBitmap, orientation); String res = FileUtilsHelper.saveBitmapAsJpeg(shrunkenBitmap, this); Log.d(TAG,"File Path: " + res); shrunkenBitmap.recycle(); Intent editImage = new Intent(this, EditImage.class); editImage.addFlags(Intent.FLAG_ACTIVITY_FORWARD_RESULT); editImage.putExtra("stuff.path", res); startActivity(editImage); }catch(Exception e){ Toast.makeText(this, R.string.cant_save_image,Toast.LENGTH_SHORT).show(); } } } } break; } }} I don´t know what i´m doing wrong... I could really need a teacher on that :) Thx for your help dudes!!

    Read the article

  • Making Those PanelBoxes Behave

    - by Duncan Mills
    I have a little problem to solve earlier this week - misbehaving <af:panelBox> components... What do I mean by that? Well here's the scenario, I have a page fragment containing a set of panelBoxes arranged vertically. As it happens, they are stamped out in a loop but that does not really matter. What I want to be able to do is to provide the user with a simple UI to close and open all of the panelBoxes in concert. This could also apply to showDetailHeader and similar items with a disclosed attrubute, but in this case it's good old panelBoxes.  Ok, so the basic solution to this should be self evident. I can set up a suitable scoped managed bean that the panelBoxes all refer to for their disclosed attribute state. Then the open all / close commandButtons in the UI can simply set the state of that bean for all the panelBoxes to pick up via EL on their disclosed attribute. Sound OK? Well that works basically without a hitch, but turns out that there is a slight problem and this is where the framework is attempting to be a little too helpful. The issue is that is the user manually discloses or hides a panelBox then that will override the value that the EL is setting. So for example. I start the page with all panelBoxes collapsed, all set by the EL state I'm storing on the session I manually disclose panelBox no 1. I press the Expand All button - all works as you would hope and all the panelBoxes are now disclosed, including of course panelBox 1 which I just expanded manually. Finally I press the Collapse All button and everything collapses except that first panelBox that I manually disclosed.  The problem is that the component remembers this manual disclosure and that overrides the value provided by the expression. If I change the viewId (navigate away and back) then the panelBox will start to behave again, until of course I touch it again! Now, the more astute amoungst you would think (as I did) Ah, sound like the MDS personalizaton stuff is getting in the way and the solution should simply be to set the dontPersist attribute to disclosed | ALL. Alas this does not fix the issue.  After a little noodling on the best way to approach this I came up with a solution that works well, although if you think of an alternative way do let me know. The principle is simple. In the disclosureListener for the panelBox I take a note of the clientID of the panelBox component that has been touched by the user along with the state. This all gets stored in a Map of Booleans in ViewScope which is keyed by clientID and stores the current disclosed state in the Boolean value.  The listener looks like this (it's held in a request scope backing bean for the page): public void handlePBDisclosureEvent(DisclosureEvent disclosureEvent) { String clientId = disclosureEvent.getComponent().getClientId(FacesContext.getCurrentInstance()); boolean state = disclosureEvent.isExpanded(); pbState.addTouchedPanelBox(clientId, state); } The pbState variable referenced here is a reference to the bean which will hold the state of the panelBoxes that lives in viewScope (recall that everything is re-set when the viewid is changed so keeping this in viewScope is just fine and cleans things up automatically). The addTouchedPanelBox() method looks like this: public void addTouchedPanelBox(String clientId, boolean state) { //create the cache if needed this is just a Map<String,Boolean> if (_touchedPanelBoxState == null) { _touchedPanelBoxState = new HashMap<String, Boolean>(); } // Simply put / replace _touchedPanelBoxState.put(clientId, state); } So that's the first part, we now have a record of every panelBox that the user has touched. So what do we do when the Collapse All or Expand All buttons are pressed? Here we do some JavaScript magic. Basically for each clientID that we have stored away, we issue a client side disclosure event from JavaScript - just as if the user had gone back and changed it manually. So here's the Collapse All button action: public String CloseAllAction() { submitDiscloseOverride(pbState.getTouchedClientIds(true), false); _uiManager.closeAllBoxes(); return null; }  The _uiManager.closeAllBoxes() method is just manipulating the master-state that all of the panelBoxes are bound to using EL. The interesting bit though is the line:  submitDiscloseOverride(pbState.getTouchedClientIds(true), false); To break that down, the first part is a call to that viewScoped state holder to ask for a list of clientIDs that need to be "tweaked": public String getTouchedClientIds(boolean targetState) { StringBuilder sb = new StringBuilder(); if (_touchedPanelBoxState != null && _touchedPanelBoxState.size() > 0) { for (Map.Entry<String, Boolean> entry : _touchedPanelBoxState.entrySet()) { if (entry.getValue() == targetState) { if (sb.length() > 0) { sb.append(','); } sb.append(entry.getKey()); } } } return sb.toString(); } You'll notice that this method only processes those panelBoxes that will be in the wrong state and returns those as a comma separated list. This is then processed by the submitDiscloseOverride() method: private void submitDiscloseOverride(String clientIdList, boolean targetDisclosureState) { if (clientIdList != null && clientIdList.length() > 0) { FacesContext fctx = FacesContext.getCurrentInstance(); StringBuilder script = new StringBuilder(); script.append("overrideDiscloseHandler('"); script.append(clientIdList); script.append("',"); script.append(targetDisclosureState); script.append(");"); Service.getRenderKitService(fctx, ExtendedRenderKitService.class).addScript(fctx, script.toString()); } } This method constructs a JavaScript command to call a routine called overrideDiscloseHandler() in a script attached to the page (using the standard <af:resource> tag). That method parses out the list of clientIDs and sends the correct message to each one: function overrideDiscloseHandler(clientIdList, newState) { AdfLogger.LOGGER.logMessage(AdfLogger.INFO, "Disclosure Hander newState " + newState + " Called with: " + clientIdList); //Parse out the list of clientIds var clientIdArray = clientIdList.split(','); for (var i = 0; i < clientIdArray.length; i++){ var panelBox = flipPanel = AdfPage.PAGE.findComponentByAbsoluteId(clientIdArray[i]); if (panelBox.getComponentType() == "oracle.adf.RichPanelBox"){ panelBox.broadcast(new AdfDisclosureEvent(panelBox, newState)); } }  }  So there you go. You can see how, with a few tweaks the same code could be used for other components with disclosure that might suffer from the same problem, although I'd point out that the behavior I'm working around here us usually desirable. You can download the running example (11.1.2.2) from here. 

    Read the article

  • Query optimization using composite indexes

    - by xmarch
    Many times, during the process of creating a new Coherence application, developers do not pay attention to the way cache queries are constructed; they only check that these queries comply with functional specs. Later, performance testing shows that these perform poorly and it is then when developers start working on improvements until the non-functional performance requirements are met. This post describes the optimization process of a real-life scenario, where using a composite attribute index has brought a radical improvement in query execution times.  The execution times went down from 4 seconds to 2 milliseconds! E-commerce solution based on Oracle ATG – Endeca In the context of a new e-commerce solution based on Oracle ATG – Endeca, Oracle Coherence has been used to calculate and store SKU prices. In this architecture, a Coherence cache stores the final SKU prices used for Endeca baseline indexing. Each SKU price is calculated from a base SKU price and a series of calculations based on information from corporate global discounts. Corporate global discounts information is stored in an auxiliary Coherence cache with over 800.000 entries. In particular, to obtain each price the process needs to execute six queries over the global discount cache. After the implementation was finished, we discovered that the most expensive steps in the price calculation discount process were the global discounts cache query. This query has 10 parameters and is executed 6 times for each SKU price calculation. The steps taken to optimise this query are described below; Starting point Initial query was: String filter = "levelId = :iLevelId AND  salesCompanyId = :iSalesCompanyId AND salesChannelId = :iSalesChannelId "+ "AND departmentId = :iDepartmentId AND familyId = :iFamilyId AND brand = :iBrand AND manufacturer = :iManufacturer "+ "AND areaId = :iAreaId AND endDate >=  :iEndDate AND startDate <= :iStartDate"; Map<String, Object> params = new HashMap<String, Object>(10); // Fill all parameters. params.put("iLevelId", xxxx); // Executing filter. Filter globalDiscountsFilter = QueryHelper.createFilter(filter, params); NamedCache globalDiscountsCache = CacheFactory.getCache(CacheConstants.GLOBAL_DISCOUNTS_CACHE_NAME); Set applicableDiscounts = globalDiscountsCache.entrySet(globalDiscountsFilter); With the small dataset used for development the cache queries performed very well. However, when carrying out performance testing with a real-world sample size of 800,000 entries, each query execution was taking more than 4 seconds. First round of optimizations The first optimisation step was the creation of separate Coherence index for each of the 10 attributes used by the filter. This avoided object deserialization while executing the query. Each index was created as follows: globalDiscountsCache.addIndex(new ReflectionExtractor("getXXX" ) , false, null); After adding these indexes the query execution time was reduced to between 450 ms and 1s. However, these execution times were still not good enough.  Second round of optimizations In this optimisation phase a Coherence query explain plan was used to identify how many entires each index reduced the results set by, along with the cost in ms of executing that part of the query. Though the explain plan showed that all the indexes for the query were being used, it also showed that the ordering of the query parameters was "sub-optimal".  Parameters associated to object attributes with high-cardinality should appear at the beginning of the filter, or more specifically, the attributes that filters out the highest of number records should be placed at the beginning. But examining corporate global discount data we realized that depending on the values of the parameters used in the query the “good” order for the attributes was different. In particular, if the attributes brand and family had specific values it was more optimal to have a different query changing the order of the attributes. Ultimately, we ended up with three different optimal variants of the query that were used in its relevant cases: String filter = "brand = :iBrand AND familyId = :iFamilyId AND departmentId = :iDepartmentId AND levelId = :iLevelId "+ "AND manufacturer = :iManufacturer AND endDate >= :iEndDate AND salesCompanyId = :iSalesCompanyId "+ "AND areaId = :iAreaId AND salesChannelId = :iSalesChannelId AND startDate <= :iStartDate"; String filter = "familyId = :iFamilyId AND departmentId = :iDepartmentId AND levelId = :iLevelId AND brand = :iBrand "+ "AND manufacturer = :iManufacturer AND endDate >=  :iEndDate AND salesCompanyId = :iSalesCompanyId "+ "AND areaId = :iAreaId  AND salesChannelId = :iSalesChannelId AND startDate <= :iStartDate"; String filter = "brand = :iBrand AND departmentId = :iDepartmentId AND familyId = :iFamilyId AND levelId = :iLevelId "+ "AND manufacturer = :iManufacturer AND endDate >= :iEndDate AND salesCompanyId = :iSalesCompanyId "+ "AND areaId = :iAreaId AND salesChannelId = :iSalesChannelId AND startDate <= :iStartDate"; Using the appropriate query depending on the value of brand and family parameters the query execution time dropped to between 100 ms and 150 ms. But these these execution times were still not good enough and the solution was cumbersome. Third and last round of optimizations The third and final optimization was to introduce a composite index. However, this did mean that it was not possible to use the Coherence Query Language (CohQL), as composite indexes are not currently supporte in CohQL. As the original query had 8 parameters using EqualsFilter, 1 using GreaterEqualsFilter and 1 using LessEqualsFilter, the composite index was built for the 8 attributes using EqualsFilter. The final query had an EqualsFilter for the multiple extractor, a GreaterEqualsFilter and a LessEqualsFilter for the 2 remaining attributes.  All individual indexes were dropped except the ones being used for LessEqualsFilter and GreaterEqualsFilter. We were now running in an scenario with an 8-attributes composite filter and 2 single attribute filters. The composite index created was as follows: ValueExtractor[] ve = { new ReflectionExtractor("getSalesChannelId" ), new ReflectionExtractor("getLevelId" ),    new ReflectionExtractor("getAreaId" ), new ReflectionExtractor("getDepartmentId" ),    new ReflectionExtractor("getFamilyId" ), new ReflectionExtractor("getManufacturer" ),    new ReflectionExtractor("getBrand" ), new ReflectionExtractor("getSalesCompanyId" )}; MultiExtractor me = new MultiExtractor(ve); NamedCache globalDiscountsCache = CacheFactory.getCache(CacheConstants.GLOBAL_DISCOUNTS_CACHE_NAME); globalDiscountsCache.addIndex(me, false, null); And the final query was: ValueExtractor[] ve = { new ReflectionExtractor("getSalesChannelId" ), new ReflectionExtractor("getLevelId" ),    new ReflectionExtractor("getAreaId" ), new ReflectionExtractor("getDepartmentId" ),    new ReflectionExtractor("getFamilyId" ), new ReflectionExtractor("getManufacturer" ),    new ReflectionExtractor("getBrand" ), new ReflectionExtractor("getSalesCompanyId" )}; MultiExtractor me = new MultiExtractor(ve); // Fill composite parameters.String SalesCompanyId = xxxx;...AndFilter composite = new AndFilter(new EqualsFilter(me,                   Arrays.asList(iSalesChannelId, iLevelId, iAreaId, iDepartmentId, iFamilyId, iManufacturer, iBrand, SalesCompanyId)),                                     new GreaterEqualsFilter(new ReflectionExtractor("getEndDate" ), iEndDate)); AndFilter finalFilter = new AndFilter(composite, new LessEqualsFilter(new ReflectionExtractor("getStartDate" ), iStartDate)); NamedCache globalDiscountsCache = CacheFactory.getCache(CacheConstants.GLOBAL_DISCOUNTS_CACHE_NAME); Set applicableDiscounts = globalDiscountsCache.entrySet(finalFilter);      Using this composite index the query improved dramatically and the execution time dropped to between 2 ms and  4 ms.  These execution times completely met the non-functional performance requirements . It should be noticed than when using the composite index the order of the attributes inside the ValueExtractor was not relevant.

    Read the article

< Previous Page | 17 18 19 20 21 22  | Next Page >