Search Results

Search found 2409 results on 97 pages for 'imap flags'.

Page 21/97 | < Previous Page | 17 18 19 20 21 22 23 24 25 26 27 28  | Next Page >

• Removing occurrences of characters in a string

  - by DmainEvent

  I am reading this book, programming Interviews exposed by John Wiley and sons and in chapter 6 they are discussing removing all instances of characters in a src string using a removal string... so removeChars(string str, string remove) In there writeup they sey the steps to accomplish this are to have a boolean lookup array with all values initially set to false, then loop through each character in remove setting the corresponding value in the lookup array to true (note: this could also be a hash if the possible character set where huge like Unicode-16 or something like that or if str and remove are both relatively small... < 100 characters I suppose). You then iterate through the str with a source and destination index, copying each character only if its corresponding value in the lookup array is false... Which makes sense... I don't understand the code that they use however... They have for(src = 0; src < len; ++src){ flags[r[src]] == true; } which is turning the flag value at the remove string indexed at src to true... so if you start out with PLEASE HELP as your str and LEA as your remove you will be setting in your flag table at 0,1,2... t|t|t but after that you will get an out of bounds exception because r doesn't have have anything greater than 2 in it... even using there example you get an out of bounds exception... Am is there code example unworkable? Entire function string removeChars( string str, string remove ){ char[] s = str.toCharArray(); char[] r = remove.toCharArray(); bool[] flags = new bool[128]; // assumes ASCII! int len = s.Length; int src, dst; // Set flags for characters to be removed for( src = 0; src < len; ++src ){ flags[r[src]] = true; } src = 0; dst = 0; // Now loop through all the characters, // copying only if they aren’t flagged while( src < len ){ if( !flags[ (int)s[src] ] ){ s[dst++] = s[src]; } ++src; } return new string( s, 0, dst ); } as you can see, r comes from the remove string. So in my example the remove string has only a size of 3 while my str string has a size of 11. len is equal to the length of the str string. So it would be 11. How can I loop through the r string since it is only size 3? I haven't compiled the code so I can loop through it, but just looking at it I know it won't work. I am thinking they wanted to loop through the r string... in other words they got the length of the wrong string here.

  Read the article

• Reachability sometimes fails, even when we do have an internet connection

  - by stoutyhk

  Hi I've searched but can't see a similar question. I've added a method to check for an internet connection per the Reachability example. It works most of the time, but when installed on the iPhone, it quite often fails even when I do have internet connectivity (only when on 3G/EDGE - WiFi is OK). Basically the code below returns NO. If I switch to another app, say Mail or Safari, and connect, then switch back to the app, then the code says the internet is reachable. Kinda seems like it needs a 'nudge'. Anyone seen this before? Any ideas? Many thanks James + (BOOL) doWeHaveInternetConnection{ BOOL success; // google should always be up right?! const char *host_name = [@"google.com" cStringUsingEncoding:NSASCIIStringEncoding]; SCNetworkReachabilityRef reachability = SCNetworkReachabilityCreateWithName(NULL, host_name); SCNetworkReachabilityFlags flags; success = SCNetworkReachabilityGetFlags(reachability, &flags); BOOL isAvailable = success && (flags & kSCNetworkFlagsReachable) && !(flags & kSCNetworkFlagsConnectionRequired); if (isAvailable) { NSLog(@"Google is reachable: %d", flags); }else{ NSLog(@"Google is unreachable"); } return isAvailable; }

  Read the article

• Inno Setup: Set default value for desktop icon-check box to true

  - by MB

  I am struggling with getting Inno Setup to set the check box to true whether a desktop icon should be created. The documentation has not been any helpful concerning this issue as well as Googlism and Stackoverflow. [Tasks] Name: "desktopicon"; Description: "{cm:CreateDesktopIcon}"; GroupDescription: "{cm:AdditionalIcons}"; Flags: unchecked My thought was a value like "checked" for "Flags" but the documentation told me, that Flags isn't responsible for this.

  Read the article

• Linux policy routing - packets not coming back

  - by Bugsik

  i am trying to set up policy routing on my home server. My network looks like this: Host routed VPN gateway Internet link through VPN 192.168.0.35/24 ---> 192.168.0.5/24 ---> 192.168.0.1 DSL router 10.200.2.235/22 .... .... 10.200.0.1 VPN server The traffic from 192.168.0.32/27 should be and is routed through VPN. I wanted to define some routing policies to route some traffic from 192.168.0.5 through VPN as well - for start - from user with uid 2000. Policy routing is done using iptables mark target and ip rule fwmark. The problem: When connecting using user 2000 from 192.168.0.5 tcpdump shows outgoing packets, but nothing comes back. Traffic from 192.168.0.35 works fine (here I am not using fwmark but src policy). Here is my VPN gateway setup: # uname -a Linux placebo 3.2.0-34-generic #53-Ubuntu SMP Thu Nov 15 10:49:02 UTC 2012 i686 i686 i386 GNU/Linux # iptables -V iptables v1.4.12 # ip -V ip utility, iproute2-ss111117 IPtables rules (all policies in table filter are ACCEPT) # iptables -t mangle -nvL Chain PREROUTING (policy ACCEPT 770K packets, 314M bytes) pkts bytes target prot opt in out source destination Chain INPUT (policy ACCEPT 767K packets, 312M bytes) pkts bytes target prot opt in out source destination Chain FORWARD (policy ACCEPT 5520 packets, 1920K bytes) pkts bytes target prot opt in out source destination Chain OUTPUT (policy ACCEPT 782K packets, 901M bytes) pkts bytes target prot opt in out source destination 74 4707 MARK all -- * * 0.0.0.0/0 0.0.0.0/0 owner UID match 2000 MARK set 0x3 Chain POSTROUTING (policy ACCEPT 788K packets, 903M bytes) pkts bytes target prot opt in out source destination # iptables -t nat -nvL Chain PREROUTING (policy ACCEPT 996 packets, 51172 bytes) pkts bytes target prot opt in out source destination Chain INPUT (policy ACCEPT 7 packets, 432 bytes) pkts bytes target prot opt in out source destination Chain OUTPUT (policy ACCEPT 1364 packets, 112K bytes) pkts bytes target prot opt in out source destination Chain POSTROUTING (policy ACCEPT 2302 packets, 160K bytes) pkts bytes target prot opt in out source destination 119 7588 MASQUERADE all -- * vpn 0.0.0.0/0 0.0.0.0/0 Routing: # ip addr show 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo inet6 ::1/128 scope host valid_lft forever preferred_lft forever 2: eth0: <BROADCAST,MULTICAST,PROMISC,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast master lan state UNKNOWN qlen 1000 link/ether 00:40:63:f9:c3:8f brd ff:ff:ff:ff:ff:ff valid_lft forever preferred_lft forever 3: lan: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP link/ether 00:40:63:f9:c3:8f brd ff:ff:ff:ff:ff:ff inet 192.168.0.5/24 brd 192.168.0.255 scope global lan inet6 fe80::240:63ff:fef9:c38f/64 scope link valid_lft forever preferred_lft forever 4: vpn: <POINTOPOINT,MULTICAST,NOARP,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UNKNOWN qlen 100 link/none inet 10.200.2.235/22 brd 10.200.3.255 scope global vpn # ip rule show 0: from all lookup local 32764: from all fwmark 0x3 lookup VPN 32765: from 192.168.0.32/27 lookup VPN 32766: from all lookup main 32767: from all lookup default # ip route show table VPN default via 10.200.0.1 dev vpn 10.200.0.0/22 dev vpn proto kernel scope link src 10.200.2.235 192.168.0.0/24 dev lan proto kernel scope link src 192.168.0.5 # ip route show default via 192.168.0.1 dev lan metric 100 10.200.0.0/22 dev vpn proto kernel scope link src 10.200.2.235 192.168.0.0/24 dev lan proto kernel scope link src 192.168.0.5 TCP dump showing no traffic coming back when connection is made from 192.168.0.5 user 2000 # tcpdump -i vpn tcpdump: verbose output suppressed, use -v or -vv for full protocol decode listening on vpn, link-type RAW (Raw IP), capture size 65535 bytes ### Traffic from user 2000 on 192.168.0.5 ### 10:19:05.629985 IP 10.200.2.235.37291 > 10.100-78-194.akamai.com.http: Flags [S], seq 2868799562, win 14600, options [mss 1460,sackOK,TS val 6887764 ecr 0,nop,wscale 4], length 0 10:19:21.678001 IP 10.200.2.235.37291 > 10.100-78-194.akamai.com.http: Flags [S], seq 2868799562, win 14600, options [mss 1460,sackOK,TS val 6891776 ecr 0,nop,wscale 4], length 0 ### Traffic from 192.168.0.35 ### 10:23:12.066174 IP 10.200.2.235.49247 > 10.100-78-194.akamai.com.http: Flags [S], seq 2294159276, win 65535, options [mss 1460,nop,wscale 4,nop,nop,TS val 557451322 ecr 0,sackOK,eol], length 0 10:23:12.265640 IP 10.100-78-194.akamai.com.http > 10.200.2.235.49247: Flags [S.], seq 2521908813, ack 2294159277, win 14480, options [mss 1367,sackOK,TS val 388565772 ecr 557451322,nop,wscale 1], length 0 10:23:12.276573 IP 10.200.2.235.49247 > 10.100-78-194.akamai.com.http: Flags [.], ack 1, win 8214, options [nop,nop,TS val 557451534 ecr 388565772], length 0 10:23:12.293030 IP 10.200.2.235.49247 > 10.100-78-194.akamai.com.http: Flags [P.], seq 1:480, ack 1, win 8214, options [nop,nop,TS val 557451552 ecr 388565772], length 479 10:23:12.574773 IP 10.100-78-194.akamai.com.http > 10.200.2.235.49247: Flags [.], ack 480, win 7776, options [nop,nop,TS val 388566081 ecr 557451552], length 0

  Read the article

• ping to web server from iphone

  - by Sreelal

  Hi , I am developing an aplication which needs to download some data from webserver.So i need to first ping to the web server to check whether the service is available after checking the internet connectivity .I used the following code to check server availability ` BOOL success = NO; const char *host_name = [@"http://192.168.1.7:8080/TestWeb/webresources/" cStringUsingEncoding:NSASCIIStringEncoding]; SCNetworkReachabilityRef reachability = SCNetworkReachabilityCreateWithName(NULL, host_name); SCNetworkReachabilityFlags flags; success = SCNetworkReachabilityGetFlags(reachability, &flags); BOOL isAvailable = success && (flags & kSCNetworkFlagsReachable) && !(flags & kSCNetworkFlagsConnectionRequired); return isAvailable; ` where my server is uploaded locally.But this code always return an invalid result,but it works correctly if i gave some exixting sites like google.com.Please let me know whats i am doing wrong..

  Read the article

• ISP Config 3 - squirrel login error & how to add an smtp server for sending mails

  - by A Prasetyo

  Hi, Case #1: I have ISPConfig3 running, sending email through telnet server.mydomain.com 25 are possible. Receiving email also possible. BUT!! problem occurs when I try to login to squirrel... I've been awaken for 2 days now and still couldn't figured out why logging in into squirrel always having an error: ERROR: Connection dropped by IMAP server. here is the /var/log/mail.log: Jun 3 00:23:27 server-01 imapd: Connection, ip=[::ffff:127.0.0.1] Jun 3 00:23:27 server-01 imapd: chdir /var/vmail/mydomain.com/info: Permission denied Jun 3 00:23:27 server-01 imapd: [email protected]: Permission denied I did chmod 777 & still doesn't work, only another message appeared Jun 3 00:24:28 server-01 imapd: Connection, ip=[::ffff:127.0.0.1] Jun 3 00:24:28 server-01 imapd: [email protected]: Account's mailbox directory is not owned by the correct uid or gid Try to do telnet to IMAP port telnet mydomain.com 143 Trying 63.105.102.48... Connected to mydomain.com. Escape character is '^]'. OK [CAPABILITY IMAP4rev1 UIDPLUS CHILDREN NAMESPACE THREAD=ORDEREDSUBJECT THREAD=REFERENCES SORT QUOTA IDLE ACL ACL2=UNION STARTTLS] Courier-IMAP ready. Copyright 1998-2008 Double Precision, Inc. See COPYING for distribution information. login [email protected] mypassword login NO Error in IMAP command received by server. and give no result... -_- I checked mysql.sock, I checked username and password in mysql db, everything is correct.. anyone can help? PLEASE?! Case #2: Does anyone know how to set or to view SMTP settings in ISPConfig 3? thank you..

  Read the article

• compile Boost as static Universal binary lib

  - by Albert

  I want to have a static Universal binary lib of Boost. (Preferable the latest stable version, that is 1.43.0, or newer.) I found many Google hits with similar problems and possible solutions. However, most of them seems outdated. Also none of them really worked. Right now, I am trying sudo ./bjam --toolset=darwin --link=static --threading=multi \ --architecture=combined --address-model=32_64 \ --macosx-version=10.4 --macosx-version-min=10.4 \ install That compiles and install fine. However, the produced binaries seems broken. az@ip245 47 (openlierox) %file /usr/local/lib/libboost_signals.a /usr/local/lib/libboost_signals.a: current ar archive random library az@ip245 49 (openlierox) %lipo -info /usr/local/lib/libboost_signals.a input file /usr/local/lib/libboost_signals.a is not a fat file Non-fat file: /usr/local/lib/libboost_signals.a is architecture: x86_64 az@ip245 48 (openlierox) %otool -hv /usr/local/lib/libboost_signals.a Archive : /usr/local/lib/libboost_signals.a /usr/local/lib/libboost_signals.a(trackable.o): Mach header magic cputype cpusubtype caps filetype ncmds sizeofcmds flags MH_MAGIC_64 X86_64 ALL 0x00 OBJECT 3 1536 SUBSECTIONS_VIA_SYMBOLS /usr/local/lib/libboost_signals.a(connection.o): Mach header magic cputype cpusubtype caps filetype ncmds sizeofcmds flags MH_MAGIC_64 X86_64 ALL 0x00 OBJECT 3 1776 SUBSECTIONS_VIA_SYMBOLS /usr/local/lib/libboost_signals.a(named_slot_map.o): Mach header magic cputype cpusubtype caps filetype ncmds sizeofcmds flags MH_MAGIC_64 X86_64 ALL 0x00 OBJECT 3 1856 SUBSECTIONS_VIA_SYMBOLS /usr/local/lib/libboost_signals.a(signal_base.o): Mach header magic cputype cpusubtype caps filetype ncmds sizeofcmds flags MH_MAGIC_64 X86_64 ALL 0x00 OBJECT 3 1776 SUBSECTIONS_VIA_SYMBOLS /usr/local/lib/libboost_signals.a(slot.o): Mach header magic cputype cpusubtype caps filetype ncmds sizeofcmds flags MH_MAGIC_64 X86_64 ALL 0x00 OBJECT 3 1616 SUBSECTIONS_VIA_SYMBOLS Any suggestion how to get that correct?

  Read the article

• Using bitwise operators on > 32 bit integers

  - by dqhendricks

  I am using bitwise operations in order to represent many access control flags within one integer. ADMIN_ACCESS = 1; EDIT_ACCOUNT_ACCESS = 2; EDIT_ORDER_ACCESS = 4; var myAccess = 3; // ie: ( ADMIN_ACCESS | EDIT_ACCOUNT_ACCESS ) if ( myAccess & EDIT_ACCOUNT_ACCESS ) { // check for correct access // allow for editing of account } Most of this is occurring on the PHP side of my project. There is one piece however where Javascript is used to join several access flags using | when saving someone's access level. This works fine to a point. I have found that once an integer (flag) gets too large ( 32bit), it no longer works correctly with bitwise operators in Javascript. For instance: alert( 4294967296 | 1 ); // equals 1, but should equal 4294967297 I am trying to find a workaround for this so that I do not have to limit my number of access control flags to 32. Each access control flag is two times the previous control flag so that each control flag will not interfere with other control flags. dec(4) = bin(100) dec(8) = bin(1000) dec(16) = bin(10000) I have noticed that when adding two of these flags together with a simple +, it seems to come out with the same answer as a bitwise or operation, but am having trouble wrapping my head around whether this is a simple substitution, or if there might be problems with doing this. Can anyone comment on the validity of this workaround? Example: (4294967296 | 262144 | 524288) == (4294967296 + 262144 + 524288)

  Read the article

• Getting a specific bit value in a byte string

  - by ignoramus

  There is a byte at a specific index in a byte string which represents eight flags; one flag per bit in the byte. If a flag is set, its corresponding bit is 1, otherwise its 0. For example, if I've got b'\x21' the flags would be 0001 0101 # Three flags are set at indexes 3, 5 and 7 # and the others are not set What would be the best way to get each bit value in that byte, so I know whether a particular flag is set or not? (Preferably using bitwise operations)

  Read the article

• slow DNS resolution

  - by Ehsan

  I have a DNS server that resolves all queries for an internal group of servers. It is a bind on CentOS 5.5 (same as RHEL5) and I have set it up to allow recursion and resolve direction without any forwarders. The problem I am facing is that it takes a freakishly long amount of time to resolve a name for the first time. (in the magnitudes of 20 sec) This causes clients to give timeout. When I set it to forward all to Google's public DNS, i.e. 8.8.8.8+8.8.4.4, it works very nicely (within a second). I tried monitoring the traffic on the net to see why it is doing this: [root@ns1 ~]# tcpdump -nnvvvA -s0 udp tcpdump: listening on eth0, link-type EN10MB (Ethernet), capture size 65535 bytes 23:06:36.137797 IP (tos 0x0, ttl 64, id 35903, offset 0, flags [none], proto: UDP (17), length: 60) 172.17.1.10.36942 > 172.17.1.4.53: [udp sum ok] 19773+ A? www.paypal.com. (32) E..<[email protected]... .....N.5.(6.M=...........www.paypal.com..... 23:06:36.140594 IP (tos 0x0, ttl 64, id 56477, offset 0, flags [none], proto: UDP (17), length: 71) 172.17.1.4.6128 > 192.35.51.30.53: [udp sum ok] 10105 [1au] A? www.paypal.com. ar: . OPT UDPsize=4096 (43) E..G....@........#3....5.3fR'y...........www.paypal.com.......)........ 23:06:38.149756 IP (tos 0x0, ttl 64, id 13078, offset 0, flags [none], proto: UDP (17), length: 71) 172.17.1.4.52425 > 192.54.112.30.53: [udp sum ok] 54892 [1au] A? www.paypal.com. ar: . OPT UDPsize=4096 (43) [email protected]&.....6p....5.3.q.l...........www.paypal.com.......)........ 23:06:40.159725 IP (tos 0x0, ttl 64, id 43016, offset 0, flags [none], proto: UDP (17), length: 71) 172.17.1.4.24059 > 192.42.93.30.53: [udp sum ok] 11205 [1au] A? www.paypal.com. ar: . OPT UDPsize=4096 (43) E..G....@..@.....*].]..5.3..+............www.paypal.com.......)........ 23:06:41.141403 IP (tos 0x0, ttl 64, id 35904, offset 0, flags [none], proto: UDP (17), length: 60) 172.17.1.10.36942 > 172.17.1.4.53: [udp sum ok] 19773+ A? www.paypal.com. (32) E..<.@..@..@... .....N.5.(6.M=...........www.paypal.com..... 23:06:42.169652 IP (tos 0x0, ttl 64, id 44001, offset 0, flags [none], proto: UDP (17), length: 60) 172.17.1.4.9141 > 192.55.83.30.53: [udp sum ok] 1184 A? www.paypal.com. (32) E..<[email protected].#..5.(...............www.paypal.com..... 23:06:42.207295 IP (tos 0x0, ttl 54, id 38004, offset 0, flags [none], proto: UDP (17), length: 205) 192.55.83.30.53 > 172.17.1.4.9141: [udp sum ok] 1184- q: A? www.paypal.com. 0/3/3 ns: paypal.com. NS ns1.isc-sns.net., paypal.com. NS ns2.isc-sns.com., paypal.com. NS ns3.isc-sns.info. ar: ns1.isc-sns.net. AAAA 2001:470:1a::1, ns1.isc-sns.net. A 72.52.71.1, ns2.isc-sns.com. A 38.103.2.1 (177) E....t..6./A.7S......5#..................www.paypal.com..................ns1.isc-sns.net..............ns2.isc-sns...............ns3.isc-sns.info..,.......... ..p.............,..........H4G..I..........&g.. (this goes on for a few more seconds) If you look carefully, you will see that the first 3-4 root servers did not respond at all. This wastes 7-8 seconds, until one of them responded. Do you think I have setup something wrong here? Interestingly, when I dig directly from the root servers that did not respond, the always respond very fast (showing the firewall/nat is not the issue here). E.g. dig www.paypal.com @192.35.51.30 works perfectly, consistently, and very fast. What do you think about this mystery?

  Read the article

• JNI String Corruption

  - by Chris Dennett

  Hi everyone, I'm getting weird string corruption across JNI calls which is causing problems on the the Java side. Every so often, I'll get a corrupted string in the passed array, which sometimes has existing parts of the original non-corrupted string. The C++ code is supposed to set the first index of the array to the address, it's a nasty hack to get around method call limitations. Additionally, the application is multi-threaded. remoteaddress[0]: 10.1.1.2:49153 remoteaddress[0]: 10.1.4.2:49153 remoteaddress[0]: 10.1.6.2:49153 remoteaddress[0]: 10.1.2.2:49153 remoteaddress[0]: 10.1.9.2:49153 remoteaddress[0]: {garbage here} java.lang.NullPointerException at kokuks.KKSAddress.<init>(KKSAddress.java:139) at kokuks.KKSAddress.createAddress(KKSAddress.java:48) at kokuks.KKSSocket._recvFrom(KKSSocket.java:963) at kokuks.scheduler.RecvOperation$1.execute(RecvOperation.java:144) at kokuks.scheduler.RecvOperation$1.execute(RecvOperation.java:1) at kokuks.KKSEvent.run(KKSEvent.java:58) at kokuks.KokuKS.handleJNIEventExpiry(KokuKS.java:872) at kokuks.KokuKS.handleJNIEventExpiry_fjni(KokuKS.java:880) at kokuks.KokuKS.runSimulator_jni(Native Method) at kokuks.KokuKS$1.run(KokuKS.java:773) at java.lang.Thread.run(Thread.java:717) remoteaddress[0]: 10.1.7.2:49153 The null pointer exception comes from trying to use the corrupt string. In C++, the address prints to standard out normally, but doing this reduces the rate of errors, from what I can see. The C++ code (if it helps): /* * Class: kokuks_KKSSocket * Method: recvFrom_jni * Signature: (Ljava/lang/String;[Ljava/lang/String;Ljava/nio/ByteBuffer;IIJ)I */ JNIEXPORT jint JNICALL Java_kokuks_KKSSocket_recvFrom_1jni (JNIEnv *env, jobject obj, jstring sockpath, jobjectArray addrarr, jobject buf, jint position, jint limit, jlong flags) { if (addrarr && env->GetArrayLength(addrarr) > 0) { env->SetObjectArrayElement(addrarr, 0, NULL); } jboolean iscopy; const char* cstr = env->GetStringUTFChars(sockpath, &iscopy); std::string spath = std::string(cstr); env->ReleaseStringUTFChars(sockpath, cstr); // release me! if (KKS_DEBUG) { std::cout << "[kks-c~" << spath << "] " << __PRETTY_FUNCTION__ << std::endl; } ns3::Ptr<ns3::Socket> socket = ns3::Names::Find<ns3::Socket>(spath); if (!socket) { std::cout << "[kks-c~" << spath << "] " << __PRETTY_FUNCTION__ << " socket not found for path!!" << std::endl; return -1; // not found } if (!addrarr) { std::cout << "[kks-c~" << spath << "] " << __PRETTY_FUNCTION__ << " array to set sender is null" << std::endl; return -1; } jsize arrsize = env->GetArrayLength(addrarr); if (arrsize < 1) { std::cout << "[kks-c~" << spath << "] " << __PRETTY_FUNCTION__ << " array too small to set sender!" << std::endl; return -1; } uint8_t* bufaddr = (uint8_t*)env->GetDirectBufferAddress(buf); long bufcap = env->GetDirectBufferCapacity(buf); uint8_t* realbufaddr = bufaddr + position; uint32_t remaining = limit - position; if (KKS_DEBUG) { std::cout << "[kks-c~" << spath << "] " << __PRETTY_FUNCTION__ << " bufaddr: " << bufaddr << ", cap: " << bufcap << std::endl; } ns3::Address aaddr; uint32_t mflags = flags; int ret = socket->RecvFrom(realbufaddr, remaining, mflags, aaddr); if (ret > 0) { if (KKS_DEBUG) std::cout << "[kks-c~" << spath << "] " << __PRETTY_FUNCTION__ << " addr: " << aaddr << std::endl; ns3::InetSocketAddress insa = ns3::InetSocketAddress::ConvertFrom(aaddr); std::stringstream ss; insa.GetIpv4().Print(ss); ss << ":" << insa.GetPort() << std::ends; if (KKS_DEBUG) std::cout << "[kks-c~" << spath << "] " << __PRETTY_FUNCTION__ << " addr: " << ss.str() << std::endl; jsize index = 0; const char *cstr = ss.str().c_str(); jstring jaddr = env->NewStringUTF(cstr); if (jaddr == NULL) std::cout << "[kks-c~" << spath << "] " << __PRETTY_FUNCTION__ << " jaddr is null!!" << std::endl; //jaddr = (jstring)env->NewGlobalRef(jaddr); env->SetObjectArrayElement(addrarr, index, jaddr); //if (env->ExceptionOccurred()) { // env->ExceptionDescribe(); //} } jint jret = ret; return jret; } The Java code (if it helps): /** * Pass an array of size 1 into remote address, and this will be set with * the sender of the packet (hax). This emulates C++ references. * * @param remoteaddress * @param buf * @param flags * @return */ public int _recvFrom(final KKSAddress remoteaddress[], ByteBuffer buf, long flags) { if (!kks.isCurrentlyThreadSafe()) throw new RuntimeException( "Not currently thread safe for ns-3 functions!" ); //lock.lock(); try { if (!buf.isDirect()) return -6; // not direct!! final String[] remoteAddrStr = new String[1]; int ret = 0; ret = recvFrom_jni( path.toPortableString(), remoteAddrStr, buf, buf.position(), buf.limit(), flags ); if (ret > 0) { System.out.println("remoteaddress[0]: " + remoteAddrStr[0]); remoteaddress[0] = KKSAddress.createAddress(remoteAddrStr[0]); buf.position(buf.position() + ret); } return ret; } finally { errNo = _getErrNo(); //lock.unlock(); } } public int recvFrom(KKSAddress[] fromaddress, final ByteBuffer bytes, long flags, long timeoutMS) { if (KokuKS.DEBUG_MODE) printMessage("public synchronized int recvFrom(KKSAddress[] fromaddress, final ByteBuffer bytes, long flags, long timeoutMS)"); if (kks.isCurrentlyThreadSafe()) { return _recvFrom(fromaddress, bytes, flags); // avoid event } fromaddress[0] = null; RecvOperation ro = new RecvOperation( kks, this, flags, true, bytes, timeoutMS ); ro.start(); fromaddress[0] = ro.getFrom(); return ro.getRetCode(); }

  Read the article

• How slow are bit fields in C++

  - by Shane MacLaughlin

  I have a C++ application that includes a number of structures with manually controlled bit fields, something like #define FLAG1 0x0001 #define FLAG2 0x0002 #define FLAG3 0x0004 class MyClass { ' ' unsigned Flags; int IsFlag1Set() { return Flags & FLAG1; } void SetFlag1Set() { Flags |= FLAG1; } void ResetFlag1() { Flags &= 0xffffffff ^ FLAG1; } ' ' }; For obvious reasons I'd like to change this to use bit fields, something like class MyClass { ' ' struct Flags { unsigned Flag1:1; unsigned Flag2:1; unsigned Flag3:1; }; ' ' }; The one concern I have with making this switch is that I've come across a number of references on this site stating how slow bit fields are in C++. My assumption is that they are still faster than the manual code shown above, but is there any hard reference material covering the speed implications of using bit fields on various platforms, specifically 32bit and 64bit windows. The application deals with huge amounts of data in memory and must be both fast and memory efficient, which could well be why it was written this way in the first place.

  Read the article

• OSX launchctl programmatically as root

  - by Lukas1

  I'm trying to start samba service using launchctl from OSX app as root, but I get error status -60031. I can run without problems the command in Terminal: sudo launchctl load -F /System/Library/LaunchDaemons/com.apple.AppleFileServer.plist` In the objective-c code, I'm using (I know it's deprecated, but that really shouldn't be the issue here) AuthorizationExecuteWithPrivileges method. Here's the code: NSString *command = @"launchctl"; // Conversion of NSArray args to char** args here (not relevant part of the code) OSStatus authStatus = AuthorizationCreate(NULL, kAuthorizationEmptyEnvironment, kAuthorizationFlagDefaults, &_authRef); if (authStatus != errAuthorizationSuccess) { NSLog(@"Failed to create application authorization: %d", (int)authStatus); return; } FILE* pipe = NULL; AuthorizationFlags flags = kAuthorizationFlagDefaults; AuthorizationItem right = {kAuthorizationRightExecute, 0, NULL, 0}; AuthorizationRights rights = {1, &right}; // Call AuthorizationCopyRights to determine or extend the allowable rights. OSStatus stat = AuthorizationCopyRights(_authRef, &rights, NULL, flags, NULL); if (stat != errAuthorizationSuccess) { NSLog(@"Copy Rights Unsuccessful: %d", (int)stat); return; } OSStatus status = AuthorizationExecuteWithPrivileges(_authRef, command.UTF8String, flags, args, &pipe); if (status != errAuthorizationSuccess) { NSLog(@"Error executing command %@ with status %d", command, status); } else { // some other stuff } I have also tried using different flags then kAuthorizationFlagDefaults, but that led to either the same problem or error code -60011 - invalid flags. What am I doing wrong here, please?

  Read the article

• volume group disappeared after xfs_check run

  - by John P

  EDIT** I have a volume group consisting of 5 RAID1 devices grouped together into a lvm and formatted with xfs. The 5th RAID device lost its RAID config (cat /proc/mdstat does not show anything). The two drives are still present (sdj and sdk), but they have no partitions. The LVM appeared to be happily using sdj up until recently. (doing a pvscan showed the first 4 RAID1 devices + /dev/sdj) I removed the LVM from the fstab, rebooted, then ran xfs_check on the LV. It ran for about half an hour, then stopped with an error. I tried rebooting again, and this time when it came up, the logical volume was no longer there. It is now looking for /dev/md5, which is gone (though it had been using /dev/sdj earlier). /dev/sdj was having read errors, but after replacing the SATA cable, those went away, so the drive appears to be fine for now. Can I modify the /etc/lvm/backup/dedvol, change the device to /dev/sdj and do a vgcfgrestore? I could try doing a pvcreate --uuid KZron2-pPTr-ZYeQ-PKXX-4Woq-6aNc-AG4rRJ /dev/sdj to make it recognize it, but I'm afraid that would erase the data on the drive UPDATE: just changing the pv to point to /dev/sdj did not work vgcfgrestore --file /etc/lvm/backup/dedvol dedvol Couldn't find device with uuid 'KZron2-pPTr-ZYeQ-PKXX-4Woq-6aNc-AG4rRJ'. Cannot restore Volume Group dedvol with 1 PVs marked as missing. Restore failed. pvscan /dev/sdj: read failed after 0 of 4096 at 0: Input/output error Couldn't find device with uuid 'KZron2-pPTr-ZYeQ-PKXX-4Woq-6aNc-AG4rRJ'. Couldn't find device with uuid 'KZron2-pPTr-ZYeQ-PKXX-4Woq-6aNc-AG4rRJ'. Couldn't find device with uuid 'KZron2-pPTr-ZYeQ-PKXX-4Woq-6aNc-AG4rRJ'. Couldn't find device with uuid 'KZron2-pPTr-ZYeQ-PKXX-4Woq-6aNc-AG4rRJ'. PV /dev/sdd2 VG VolGroup00 lvm2 [74.41 GB / 0 free] PV /dev/md2 VG dedvol lvm2 [931.51 GB / 0 free] PV /dev/md3 VG dedvol lvm2 [931.51 GB / 0 free] PV /dev/md0 VG dedvol lvm2 [931.51 GB / 0 free] PV /dev/md4 VG dedvol lvm2 [931.51 GB / 0 free] PV unknown device VG dedvol lvm2 [1.82 TB / 63.05 GB free] Total: 6 [5.53 TB] / in use: 6 [5.53 TB] / in no VG: 0 [0 ] vgscan Reading all physical volumes. This may take a while... /dev/sdj: read failed after 0 of 4096 at 0: Input/output error /dev/sdj: read failed after 0 of 4096 at 2000398843904: Input/output error Found volume group "VolGroup00" using metadata type lvm2 Found volume group "dedvol" using metadata type lvm2 vgdisplay dedvol --- Volume group --- VG Name dedvol System ID Format lvm2 Metadata Areas 5 Metadata Sequence No 10 VG Access read/write VG Status resizable MAX LV 0 Cur LV 1 Open LV 0 Max PV 0 Cur PV 5 Act PV 5 VG Size 5.46 TB PE Size 4.00 MB Total PE 1430796 Alloc PE / Size 1414656 / 5.40 TB Free PE / Size 16140 / 63.05 GB VG UUID o1U6Ll-5WH8-Pv7Z-Rtc4-1qYp-oiWA-cPD246 dedvol { id = "o1U6Ll-5WH8-Pv7Z-Rtc4-1qYp-oiWA-cPD246" seqno = 10 status = ["RESIZEABLE", "READ", "WRITE"] flags = [] extent_size = 8192 # 4 Megabytes max_lv = 0 max_pv = 0 physical_volumes { pv0 { id = "Msiee7-Zovu-VSJ3-Y2hR-uBVd-6PaT-Ho9v95" device = "/dev/md2" # Hint only status = ["ALLOCATABLE"] flags = [] dev_size = 1953519872 # 931.511 Gigabytes pe_start = 384 pe_count = 238466 # 931.508 Gigabytes } pv1 { id = "ZittCN-0x6L-cOsW-v1v4-atVN-fEWF-e3lqUe" device = "/dev/md3" # Hint only status = ["ALLOCATABLE"] flags = [] dev_size = 1953519872 # 931.511 Gigabytes pe_start = 384 pe_count = 238466 # 931.508 Gigabytes } pv2 { id = "NRNo0w-kgGr-dUxA-mWnl-bU5v-Wld0-XeKVLD" device = "/dev/md0" # Hint only status = ["ALLOCATABLE"] flags = [] dev_size = 1953519872 # 931.511 Gigabytes pe_start = 384 pe_count = 238466 # 931.508 Gigabytes } pv3 { id = "2EfLFr-JcRe-MusW-mfAs-WCct-u4iV-W0pmG3" device = "/dev/md4" # Hint only status = ["ALLOCATABLE"] flags = [] dev_size = 1953519872 # 931.511 Gigabytes pe_start = 384 pe_count = 238466 # 931.508 Gigabytes } pv4 { id = "KZron2-pPTr-ZYeQ-PKXX-4Woq-6aNc-AG4rRJ" device = "/dev/md5" # Hint only status = ["ALLOCATABLE"] flags = [] dev_size = 3907028992 # 1.81935 Terabytes pe_start = 384 pe_count = 476932 # 1.81935 Terabytes } }

  Read the article

• iptables 1.4 and passive FTP on custom port

  - by Cracky

  after the upgrade from debian squeeze to wheezy I've got a problem with passive FTP connection. I could narrow it to be iptables related, as I could connect via FTP w/o problems after adding my IP to the iptables ACCEPT rule. Before the upgrade I was able just to do modprobe nf_conntract_ftp ports=21332 and adding iptables -A THRU -p tcp --dport 21332 -m state --state NEW,ESTABLISHED,RELATED -j ACCEPT now..it doesn't help anymore. The INPUT rule is being triggered as I can see in the counter, but the directory listing is the last thing it does. Setting up a passive-port range is the last thing I want to do, I dislike open ports. I also tried the trick with helper mod by adding following rule before the actual rule for 21332 iptables -A THRU -p tcp -i eth0 --dport 21332 -m state --state NEW -m helper --helper ftp-21332 -j ACCEPT but it doesn't help and is even not being triggered according to counter. The rule in the next line (w/o helper) is being triggered.. here some info: # iptables --version iptables v1.4.14 # lsmod |grep nf_ nf_nat_ftp 12460 0 nf_nat 18242 1 nf_nat_ftp nf_conntrack_ftp 12605 1 nf_nat_ftp nf_conntrack_ipv4 14078 32 nf_nat nf_defrag_ipv4 12483 1 nf_conntrack_ipv4 nf_conntrack 52720 7 xt_state,nf_conntrack_ipv4,xt_conntrack,nf_conntrack_ftp,nf_nat,nf_nat_ftp,xt_helper # uname -a Linux loki 3.2.0-4-amd64 #1 SMP Debian 3.2.46-1 x86_64 GNU/Linux # iptables-save # Generated by iptables-save v1.4.14 on Sun Jun 30 03:54:28 2013 *filter :INPUT ACCEPT [0:0] :FORWARD ACCEPT [0:0] :OUTPUT ACCEPT [0:0] :BLACKLIST - [0:0] :LOGDROP - [0:0] :SPAM - [0:0] :THRU - [0:0] :WEB - [0:0] :fail2ban-dovecot-pop3imap - [0:0] :fail2ban-pureftpd - [0:0] :fail2ban-ssh - [0:0] -A INPUT -p tcp -m multiport --dports 110,995,143,993 -j fail2ban-dovecot-pop3imap -A INPUT -p tcp -m multiport --dports 21,21332 -j fail2ban-pureftpd -A INPUT -p tcp -m multiport --dports 22 -j fail2ban-ssh -A INPUT -p tcp -m multiport --dports 110,995,143,993 -j fail2ban-dovecot-pop3imap -A INPUT -i lo -j ACCEPT -A INPUT -i eth0 -p tcp -m tcp --tcp-flags FIN,SYN,RST,PSH,ACK,URG NONE -j DROP -A INPUT -i eth0 -p tcp -m tcp --tcp-flags FIN,SYN FIN,SYN -j DROP -A INPUT -i eth0 -p tcp -m tcp --tcp-flags SYN,RST SYN,RST -j DROP -A INPUT -i eth0 -p tcp -m tcp --tcp-flags FIN,RST FIN,RST -j DROP -A INPUT -i eth0 -p tcp -m tcp --tcp-flags FIN,ACK FIN -j DROP -A INPUT -i eth0 -p tcp -m tcp --tcp-flags ACK,URG URG -j DROP -A INPUT -m conntrack --ctstate RELATED,ESTABLISHED -j ACCEPT -A INPUT -j BLACKLIST -A INPUT -j THRU -A INPUT -j LOGDROP -A OUTPUT -j ACCEPT -A OUTPUT -s 93.223.38.223/32 -j ACCEPT -A BLACKLIST -s 38.113.165.0/24 -j LOGDROP -A BLACKLIST -s 202.177.216.0/24 -j LOGDROP -A BLACKLIST -s 130.117.190.0/24 -j LOGDROP -A BLACKLIST -s 117.79.92.0/24 -j LOGDROP -A BLACKLIST -s 72.47.228.0/24 -j LOGDROP -A BLACKLIST -s 195.200.70.0/24 -j LOGDROP -A BLACKLIST -s 195.200.71.0/24 -j LOGDROP -A LOGDROP -m limit --limit 5/sec -j LOG --log-prefix drop_packet_ --log-level 7 -A LOGDROP -p tcp -m tcp --dport 25 -m limit --limit 2/sec -j LOG --log-prefix spam_blacklist --log-level 7 -A LOGDROP -p tcp -m tcp --dport 80 -m limit --limit 2/sec -j LOG --log-prefix web_blacklist --log-level 7 -A LOGDROP -p tcp -m tcp --dport 22 -m limit --limit 2/sec -j LOG --log-prefix ssh_blacklist --log-level 7 -A LOGDROP -j REJECT --reject-with icmp-host-prohibited -A THRU -p icmp -m limit --limit 1/sec -m icmp --icmp-type 8 -j ACCEPT -A THRU -i eth0 -p tcp -m tcp --dport 25 -j ACCEPT -A THRU -i eth0 -p udp -m udp --dport 53 -j ACCEPT -A THRU -i eth0 -p tcp -m tcp --dport 80 -j ACCEPT -A THRU -i eth0 -p tcp -m tcp --dport 110 -j ACCEPT -A THRU -i eth0 -p tcp -m tcp --dport 143 -j ACCEPT -A THRU -i eth0 -p tcp -m tcp --dport 465 -j ACCEPT -A THRU -i eth0 -p tcp -m tcp --dport 585 -j ACCEPT -A THRU -i eth0 -p tcp -m tcp --dport 993 -j ACCEPT -A THRU -i eth0 -p tcp -m tcp --dport 995 -j ACCEPT -A THRU -i eth0 -p tcp -m tcp --dport 2008 -m state --state NEW,RELATED,ESTABLISHED -j ACCEPT -A THRU -i eth0 -p tcp -m tcp --dport 10011 -m state --state NEW,RELATED,ESTABLISHED -j ACCEPT -A THRU -i eth0 -p tcp -m tcp --dport 21332 -m state --state NEW,RELATED,ESTABLISHED -j ACCEPT -A THRU -i eth0 -p tcp -m tcp --dport 30033 -m state --state NEW,RELATED,ESTABLISHED -j ACCEPT -A fail2ban-dovecot-pop3imap -j RETURN -A fail2ban-dovecot-pop3imap -j RETURN -A fail2ban-pureftpd -j RETURN -A fail2ban-pureftpd -j RETURN -A fail2ban-ssh -j RETURN -A fail2ban-ssh -j RETURN COMMIT # Completed on Sun Jun 30 03:54:28 2013 So, as I said, I have no problems with connecting when adding my IP to go through..but that's not a solution as noone except me can connect anymore~ If someone got an idea what the problem is, please help me! Thanks Cracky

  Read the article

• Issues with LVM partition size in Server 13.04

  - by Michael

  I am new to ubuntu and a little confused about how hard drive partitions and LVM works. I remember setting up Ubuntu server 13.04 and telling to to use 1TB of a 3TB server. Well I have maxed that out with blu-ray rips and want the rest of the drive for space. On log-in it says: System load: 2.24 Processes: 179 Usage of /: 88.7% of 912.89GB Users logged in: 0 Memory usage: 6% IP address for p5p1: 192.168.0.100 Swap usage: 0% => / is using 88.7% of 912.89GB lvdisplay outputs: --- Logical volume --- LV Path /dev/DeathStar-vg/root LV Name root VG Name DeathStar-vg LV Write Access read/write LV Creation host, time DeathStar, 2013-05-18 22:21:11 -0400 LV Status available # open 1 LV Size 2.70 TiB Current LE 707789 Segments 2 Allocation inherit Read ahead sectors auto - currently set to 256 Block device 252:0 --- Logical volume --- LV Path /dev/DeathStar-vg/swap_1 LV Name swap_1 VG Name DeathStar-vg LV Write Access read/write LV Creation host, time DeathStar, 2013-05-18 22:21:11 -0400 LV Status available # open 2 LV Size 3.75 GiB Current LE 959 Segments 1 Allocation inherit Read ahead sectors auto - currently set to 256 Block device 252:1 vgdisplay outputs: VG Name DeathStar-vg System ID Format lvm2 Metadata Areas 1 Metadata Sequence No 4 VG Access read/write VG Status resizable MAX LV 0 Cur LV 2 Open LV 2 Max PV 0 Cur PV 1 Act PV 1 VG Size 2.73 TiB PE Size 4.00 MiB Total PE 715335 Alloc PE / Size 708748 / 2.70 TiB Free PE / Size 6587 / 25.73 GiB df outputs: Filesystem 1K-blocks Used Available Use% Mounted on /dev/mapper/DeathStar--vg-root 957238932 848972636 59634696 94% / none 4 0 4 0% /sys/fs/cgroup udev 1864716 4 1864712 1% /dev tmpfs 374968 1060 373908 1% /run none 5120 4 5116 1% /run/lock none 1874824 148 1874676 1% /run/shm none 102400 24 102376 1% /run/user /dev/sda2 234153 56477 165184 26% /boot And fdisk /dev/sda -l outputs: Disk /dev/sda: 3000.6 GB, 3000592982016 bytes 255 heads, 63 sectors/track, 364801 cylinders, total 5860533168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disk identifier: 0x00000000 Device Boot Start End Blocks Id System /dev/sda1 1 4294967295 2147483647+ ee GPT Partition 1 does not start on physical sector boundary. I just don't know what to make of all this and am not sure how I can make it use all 2.73TBs. Thanks in advance for any help. EDIT-- Yes I did make changes to the LVM Config, but it didnt do anything. As requested, output of parted -l /dev/sda Model: ATA WDC WD30EFRX-68A (scsi) Disk /dev/sda: 3001GB Sector size (logical/physical): 512B/4096B Partition Table: gpt Number Start End Size File system Name Flags 1 1049kB 2097kB 1049kB bios_grub 2 2097kB 258MB 256MB ext2 3 258MB 3001GB 3000GB lvm Model: ATA WDC WD30EFRX-68A (scsi) Disk /dev/sdb: 3001GB Sector size (logical/physical): 512B/4096B Partition Table: msdos Number Start End Size Type File system Flags Model: Linux device-mapper (linear) (dm) Disk /dev/mapper/DeathStar--vg-swap_1: 4022MB Sector size (logical/physical): 512B/4096B Partition Table: loop Number Start End Size File system Flags 1 0.00B 4022MB 4022MB linux-swap(v1) Model: Linux device-mapper (linear) (dm) Disk /dev/mapper/DeathStar--vg-root: 2969GB Sector size (logical/physical): 512B/4096B Partition Table: loop Number Start End Size File system Flags 1 0.00B 2969GB 2969GB ext4

  Read the article

• How to show Windows System Reserved partition using Ubuntu live dvd?

  - by Veeggon

  All questions in this site ask how to "hide"! I want to fix my boot (fix mrb wont work, I have GPT Disk) by changing some files at Windows System Reserved. GParted shows the following partitions (but Nautilus doesn't): **/dev/sda1 - file system: Unknown - 128Mb - flags: msftres** (this one shows *"Warning: Unable to detect file system! Possible reasons: -file system is damaged -file system is unknown to GParted -there is no file system available (unformated -the device entry /dev/sda1 is missing)"*) **/dev/sda2 - file system: fat32 -100Mb - flags: boot** **/dev/sda3 - file system: ntfs - 500Gb**

  Read the article

• Gmail - error adding pop3 account from my mail server (postfix+courier)

  - by Lucas Lobosque

  I use courier to add pop3/imap support to my mail server, and I get this when I try to add a new pop3 account in gmail: Server returned error: "Missing +OK response upon connecting to the server: * OK [CAPABILITY IMAP4rev1 UIDPLUS CHILDREN NAMESPACE THREAD=ORDEREDSUBJECT THREAD=REFERENCES SORT QUOTA IDLE ACL ACL2=UNION STARTTLS] Courier-IMAP ready. Copyright 1998-2011 Double Precision, Inc. See COPYING for distribution information." Any help on how to fix this would be appreciated.

  Read the article

• How do I change the default Junk Mail folder in Outlook?

  - by seanyboy

  I'm using an IMAP mail service (fastmail.fm) which moves Junk email messages to an IMAP folder called "Junk Mail". Outlook archives Junk to "Junk E-Mail". How do I change Outlook so that it uses the "Junk Mail" folder for Junk instead of the default?

  Read the article

• how to notify a program of another program? dll? directory? path?

  - by Brady Trainor

  I am trying to experiment with GNUS email in Emacs, in Windows (EDIT: x64 bit). I've got it to work in Ubuntu, but struggling with it in Windows. From http://www.gnu.org/software/emacs/manual/html_mono/emacs-gnutls.html#Help-For-Users I read in second paragraph: This is a little bit trickier on the W32 (Windows) platform, but if you have the GnuTLS DLLs (available from http://sourceforge.net/projects/ezwinports/files/ thanks to Eli Zaretskii) in the same directory as Emacs, you should be OK. I have downloaded and unzipped the gnutls-3.0.9-w32-bin package, but am not sure what to do with it. I have tried putting it in Program Files (x86), which is "the same directory as Emacs". I have tried putting it in the emacs-24.3 folder. I consider merging all the folders in between the two, but am hesitant as that seems a difficult troubleshoot attempt compared to my knowledge on these matters. I think Emacs needs to somehow see the gnutls binaries and/or dlls. My knowledge is limited on this. I've also struggled to understand PATHs for sometime now, and am not sure if that approach is relevant here. FYI, the emacs directory contains folders labeled bin, etc, info, leim, lisp and site-lisp. The gnutls directory contains folder labeled bin, include, lib and share. Hmm, now I'm finding lots of links on adding paths. Still, I'm skeptical that I would only add gnutls.exe path, as it seems the dlls are needed. Some additional data for Ramhound's first comment I have been attempting the (require 'gnutls) route. This seems to be the most relevant parts in the log: Opening connection to imap.gmail.com via tls... gnutls.c: [1] (Emacs) GnuTLS library not found Opening TLS connection to `imap.gmail.com'... Opening TLS connection with `gnutls-cli --insecure -p 993 imap.gmail.com'...failed Opening TLS connection with `gnutls-cli --insecure -p 993 imap.gmail.com --protocols ssl3'...failed Opening TLS connection with `openssl s_client -connect imap.gmail.com:993 -no_ssl2 -ign_eof'...failed Opening TLS connection to `imap.gmail.com'...failed I am not sure what "in stallion" means. Emacs seems to have installed itself in program files (x86), so I assume it is 32 bit. I can try and figure out how to double check, but did not realize I would get such fast response time, and am headed out right now. I will try merging the files later tonight?

  Read the article

• Mail server not sending or receiving after removal from barracuda blacklist to white list

  - by user137765

  Mail server not sending or receiving after removal from barracuda blacklist to white list. I've checked against black lists and the ip and domain are clean. 1and1 are saying its Barracuda black list and barracuda are saying its not blacklisted and that its somethign with 1and1 server. section from log file... Sep 20 04:29:25 vegaserve postfix/smtpd[16906]: connect from mta860.chtah.net[63.236.31.146] Sep 20 04:29:25 vegaserve postfix/smtpd[16070]: connect from host81-136-144-117.in-addr.btopenworld.com[81.136.144.117] Sep 20 04:29:27 vegaserve pop3d: IMAP connect from @ [201.80.253.153]checkmailpasswd: FAILED: raidon - short names not allowed from @ [201.80.253.153]ERR: 1348111767.185119 LOGOUT, [email protected], ip=[86.143.136.249], top=0, retr=0, time=151, rcvd=18, sent=283, maildir=/var/qmail/mailnames/mbelectrics.net/mb/Maildir Sep 20 04:29:28 vegaserve pop3d: LOGIN FAILED, ip=[201.80.253.153] Sep 20 04:29:28 vegaserve postfix/smtpd[15388]: connect from mta965.emails.itv.com[8.30.201.55] Sep 20 04:29:29 vegaserve postfix/smtpd[18194]: warning: connect to proxy service 127.0.0.1:10025: Connection timed out Sep 20 04:29:29 vegaserve postfix/cleanup[24879]: 95CB31E87556C: message-id=<[email protected] Sep 20 04:29:29 vegaserve postfix/qmgr[14378]: 95CB31E87556C: from=, size=975, nrcpt=1 (queue active) Sep 20 04:29:29 vegaserve postfix/smtpd[18194]: disconnect from uspmta172097.emarsys.net[195.54.172.97] Sep 20 04:29:29 vegaserve postfix/smtp[25748]: 95CB31E87556C: to=, orig_to=, relay=none, delay=0.05, delays=0.05/0/0/0, dsn=5.4.6, status=bounced (mail for vegaserve.com loops back to myself) Sep 20 04:29:29 vegaserve postfix/bounce[25897]: warning: 95CB31E87556C: undeliverable postmaster notification discarded Sep 20 04:29:29 vegaserve postfix/qmgr[14378]: 95CB31E87556C: removed Sep 20 04:29:32 vegaserve pop3d: Connection, ip=[201.80.253.153] Sep 20 04:29:37 vegaserve pop3d: IMAP connect from @ [201.80.253.153]checkmailpasswd: FAILED: rei - short names not allowed from @ [201.80.253.153]ERR: LOGIN FAILED, ip=[201.80.253.153] Sep 20 04:29:38 vegaserve pop3d: Connection, ip=[201.80.253.153] Sep 20 04:29:38 vegaserve postfix/smtpd[19328]: warning: connect to proxy service 127.0.0.1:10025: Connection timed out Sep 20 04:29:40 vegaserve postfix/smtpd[18331]: warning: connect to proxy service 127.0.0.1:10025: Connection timed out Sep 20 04:29:40 vegaserve postfix/smtpd[24464]: warning: connect to proxy service 127.0.0.1:10025: Connection timed out Sep 20 04:29:40 vegaserve postfix/cleanup[24825]: BD1A71E87556C: message-id=<[email protected] Sep 20 04:29:40 vegaserve postfix/qmgr[14378]: BD1A71E87556C: from=, size=673, nrcpt=1 (queue active) Sep 20 04:29:40 vegaserve postfix/smtpd[24464]: disconnect from unknown[118.97.212.190] Sep 20 04:29:40 vegaserve postfix/smtp[25748]: BD1A71E87556C: to=, orig_to=, relay=none, delay=0.04, delays=0.04/0/0/0, dsn=5.4.6, status=bounced (mail for vegaserve.com loops back to myself) Sep 20 04:29:40 vegaserve postfix/bounce[25995]: warning: BD1A71E87556C: undeliverable postmaster notification discarded Sep 20 04:29:40 vegaserve postfix/qmgr[14378]: BD1A71E87556C: removed Sep 20 04:29:41 vegaserve postfix/cleanup[24879]: 0A42B1E87556C: message-id=<[email protected] Sep 20 04:29:41 vegaserve postfix/qmgr[14378]: 0A42B1E87556C: from=, size=961, nrcpt=1 (queue active) Sep 20 04:29:41 vegaserve postfix/smtpd[18331]: disconnect from bay0-omc4-s10.bay0.hotmail.com[65.54.190.212] Sep 20 04:29:41 vegaserve postfix/smtp[25748]: 0A42B1E87556C: to=, orig_to=, relay=none, delay=0.03, delays=0.03/0/0/0, dsn=5.4.6, status=bounced (mail for vegaserve.com loops back to myself) Sep 20 04:29:41 vegaserve postfix/bounce[25897]: warning: 0A42B1E87556C: undeliverable postmaster notification discarded Sep 20 04:29:41 vegaserve postfix/qmgr[14378]: 0A42B1E87556C: removed Sep 20 04:29:43 vegaserve postfix/smtpd[17511]: warning: connect to proxy service 127.0.0.1:10025: Connection timed out Sep 20 04:29:43 vegaserve postfix/cleanup[24825]: 8F8991E87556C: message-id=<[email protected] Sep 20 04:29:43 vegaserve postfix/qmgr[14378]: 8F8991E87556C: from=, size=946, nrcpt=1 (queue active) Sep 20 04:29:43 vegaserve postfix/smtpd[17511]: disconnect from blu0-omc4-s22.blu0.hotmail.com[65.55.111.161] Sep 20 04:29:43 vegaserve postfix/smtp[25748]: 8F8991E87556C: to=, orig_to=, relay=none, delay=0.05, delays=0.02/0/0.02/0, dsn=5.4.6, status=bounced (mail for vegaserve.com loops back to myself) Sep 20 04:29:43 vegaserve postfix/bounce[25995]: warning: 8F8991E87556C: undeliverable postmaster notification discarded Sep 20 04:29:43 vegaserve postfix/qmgr[14378]: 8F8991E87556C: removed Sep 20 04:29:44 vegaserve postfix/cleanup[24879]: 088641E87556C: message-id=<[email protected] Sep 20 04:29:44 vegaserve postfix/qmgr[14378]: 088641E87556C: from=, size=1078, nrcpt=1 (queue active) Sep 20 04:29:44 vegaserve postfix/smtpd[19328]: disconnect from smtp10.bis7.eu.blackberry.com[178.239.85.15] Sep 20 04:29:44 vegaserve postfix/smtp[25748]: 088641E87556C: to=, orig_to=, relay=none, delay=0.05, delays=0.03/0/0.01/0, dsn=5.4.6, status=bounced (mail for vegaserve.com loops back to myself) Sep 20 04:29:44 vegaserve postfix/bounce[25995]: warning: 088641E87556C: undeliverable postmaster notification discarded Sep 20 04:29:44 vegaserve postfix/qmgr[14378]: 088641E87556C: removed Sep 20 04:29:44 vegaserve pop3d: IMAP connect from @ [201.80.253.153]checkmailpasswd: FAILED: rin - short names not allowed from @ [201.80.253.153]ERR: LOGIN FAILED, ip=[201.80.253.153] Sep 20 04:29:44 vegaserve pop3d: Connection, ip=[201.80.253.153] Sep 20 04:29:44 vegaserve postfix/smtpd[18965]: warning: connect to proxy service 127.0.0.1:10025: Connection timed out Sep 20 04:29:44 vegaserve postfix/cleanup[24825]: 946F51E87556C: message-id=<[email protected] Sep 20 04:29:44 vegaserve postfix/qmgr[14378]: 946F51E87556C: from=, size=1173, nrcpt=1 (queue active) Sep 20 04:29:44 vegaserve postfix/smtpd[18965]: disconnect from hubrelay-rd.bt.com[62.239.224.99] Sep 20 04:29:44 vegaserve postfix/smtp[25748]: 946F51E87556C: to=, orig_to=, relay=none, delay=0.04, delays=0.04/0/0/0, dsn=5.4.6, status=bounced (mail for vegaserve.com loops back to myself) Sep 20 04:29:44 vegaserve postfix/bounce[25897]: warning: 946F51E87556C: undeliverable postmaster notification discarded Sep 20 04:29:44 vegaserve postfix/qmgr[14378]: 946F51E87556C: removed Sep 20 04:29:45 vegaserve postfix/smtpd[14816]: connect from col0-omc2-s12.col0.hotmail.com[65.55.34.86] Sep 20 04:29:47 vegaserve postfix/smtpd[16900]: warning: connect to proxy service 127.0.0.1:10025: Connection timed out Sep 20 04:29:47 vegaserve postfix/cleanup[24879]: 961721E87556C: message-id=<[email protected] Sep 20 04:29:47 vegaserve postfix/qmgr[14378]: 961721E87556C: from=, size=1082, nrcpt=1 (queue active) Sep 20 04:29:47 vegaserve postfix/smtpd[16900]: disconnect from mta-35d2.livingsocial.com[199.91.53.210] Sep 20 04:29:47 vegaserve postfix/smtp[25748]: 961721E87556C: to=, orig_to=, relay=none, delay=0.04, delays=0.04/0/0/0, dsn=5.4.6, status=bounced (mail for vegaserve.com loops back to myself) Sep 20 04:29:47 vegaserve postfix/bounce[25995]: warning: 961721E87556C: undeliverable postmaster notification discarded Sep 20 04:29:47 vegaserve postfix/qmgr[14378]: 961721E87556C: removed Sep 20 04:29:50 vegaserve pop3d: IMAP connect from @ [201.80.253.153]checkmailpasswd: FAILED: rini - short names not allowed from @ [201.80.253.153]ERR: LOGIN FAILED, ip=[201.80.253.153] Sep 20 04:29:50 vegaserve pop3d: Connection, ip=[201.80.253.153] Sep 20 04:29:52 vegaserve postfix/smtpd[24478]: connect from col0-omc2-s13.col0.hotmail.com[65.55.34.87] Sep 20 04:29:52 vegaserve postfix/smtpd[18923]: connect from www.idbwplan.com[193.181.254.21] Sep 20 04:29:55 vegaserve postfix/smtpd[15968]: connect from 105-48.mta.dotmailer.com[94.143.105.48] Sep 20 04:29:56 vegaserve pop3d: IMAP connect from @ [201.80.253.153]checkmailpasswd: FAILED: ringo - short names not allowed from @ [201.80.253.153]ERR: LOGIN FAILED, ip=[201.80.253.153] Sep 20 04:29:56 vegaserve pop3d: Connection, ip=[201.80.253.153] Sep 20 04:30:00 vegaserve postfix/smtpd[18772]: warning: connect to proxy service 127.0.0.1:10025: Connection timed out Sep 20 04:30:01 vegaserve postfix/cleanup[24825]: 1DAD71E87556C: message-id=<[email protected] Sep 20 04:30:01 vegaserve postfix/qmgr[14378]: 1DAD71E87556C: from=, size=1022, nrcpt=1 (queue active) Sep 20 04:30:01 vegaserve postfix/smtpd[18772]: disconnect from mail95.us2.mcsv.net[173.231.139.95] Sep 20 04:30:01 vegaserve postfix/smtp[25748]: 1DAD71E87556C: to=, orig_to=, relay=none, delay=0.06, delays=0.05/0/0/0, dsn=5.4.6, status=bounced (mail for vegaserve.com loops back to myself) Sep 20 04:30:01 vegaserve postfix/bounce[25897]: warning: 1DAD71E87556C: undeliverable postmaster notification discarded Sep 20 04:30:01 vegaserve postfix/qmgr[14378]: 1DAD71E87556C: removed Sep 20 04:30:02 vegaserve pop3d: IMAP connect from @ [201.80.253.153]checkmailpasswd: FAILED: ritsuko - short names not allowed from @ [201.80.253.153]ERR: LOGIN FAILED, ip=[201.80.253.153] Sep 20 04:30:02 vegaserve postfix/smtpd[16911]: warning: connect to proxy service 127.0.0.1:10025: Connection timed out Sep 20 04:30:02 vegaserve pop3d: Connection, ip=[201.80.253.153] Sep 20 04:30:02 vegaserve postfix/cleanup[24879]: 8AADD1E87556C: message-id=<[email protected] Sep 20 04:30:02 vegaserve postfix/qmgr[14378]: 8AADD1E87556C: from=, size=1003, nrcpt=1 (queue active) Sep 20 04:30:02 vegaserve postfix/smtpd[16911]: disconnect from mr133.createsend.com[184.106.86.133] Sep 20 04:30:02 vegaserve postfix/smtp[25748]: 8AADD1E87556C: to=, orig_to=, relay=none, delay=0.02, delays=0.02/0/0/0, dsn=5.4.6, status=bounced (mail for vegaserve.com loops back to myself)

  Read the article

• Can't connect to Gmail server via Mail.app in Mac OS X 10.6.3

  - by Johnny

  I've added my gmail account to Mail.app It worked find in previous days, and downloaded thousands of previous mails. But now, it can't connect to gmail server for days. What's the matter here? Here is my config in account setting: Account Type: Gmail IMAP Email Address: [email protected] Incoming Mail Server: imap.gmail.com User Name: [email protected] Password: xxxxxx And also, is there any means that I can view the transaction log of Mail.app? Maybe there I can find more information.

  Read the article

• What does the @ symbol mean in a file's permission settings?

  - by Shiki

  I'm on MacOSX, I did ln -s on a directory and these are the results: -rwxrwxr-x@ 1 shiki admin 970332 Mar 6 16:38 apc.so -rwxrwxr-x@ 1 shiki admin 653884 Mar 6 16:38 eaccelerator.so -rw-rw-r--@ 1 shiki admin 60064 Mar 6 16:38 gettext.a -rwxrwxr-x@ 1 shiki admin 80320 Mar 6 16:38 gettext.so -rw-rw-r--@ 1 shiki admin 514784 Mar 6 16:38 imap.a -rwxrwxr-x@ 1 shiki admin 3886132 Mar 6 16:38 imap.so What do those @ symbols mean?

  Read the article

• apt: how to search using package tags?

  - by depesz

  Some (most?) packages in Debian, have tags. For example: =# apt-cache show squirrelmail | perl -lne 'print if /^Tag:/.../^\S/' Tag: implemented-in::php, interface::web, mail::imap, mail::smtp, mail::user-agent, network::server, protocol::http, protocol::imap, protocol::smtp, role::program, scope::application, use::browsing, use::editing, use::searching, use::transmission, use::viewing, web::TODO, web::application, works-with::mail Section: web But, I can't find a way, to list all packages with given tag. Is it possible?

  Read the article

• PAM module for authentication by IP or other password-disabling module

  - by Robin Rosenberg

  I'm looking for a Linux pam module that accepts any password for connections from a specific IP. I don't want to disable passwords completely. I need it for migration from one imap server to another (cyrus to zimbra) without knowing every password. I used such a module some six years ago. That was for imap migration too. Unfortunately I cannot recall the name of the module and can't find it by other means either. Any pointers?

  Read the article

< Previous Page | 17 18 19 20 21 22 23 24 25 26 27 28  | Next Page >