Search Results

Search found 532 results on 22 pages for 'lucid'.

Page 21/22 | < Previous Page | 17 18 19 20 21 22  | Next Page >

• Restart mysql keeping the data

  - by sitonico

  I'm quite new using mysql, so let me know if I'm missing something. I took some holidays, and when I got back to work and I tried to log in phpmyadmin I got a ERROR 2002 (HY000): Can't connect to local MySQL server through socket '/var/run/mysqld/mysqld.sock' (2). I never had this problem, so I was browsing to look for a solution. I tried some things, and I'm afraid I touched too much. I couldn't solve the problem, and the I realized that I had some actualizations to be done, and I thought that they may be helpful for mysql. Then I also realized that when I was doing this actualizations first day, they stopped because I had a lack of space, so I restarted then. Then,when the system was configuring mysql, it didn't advance. I waited for a long time and then I just stopped it and restarted the computer. After it, I just tried to uninstall mysql with sudo apt-get remove mysql-server-5.1, and install it again, but it didn't work. Now I have 2 questions: What do you think it is happening? Should I remove mysql completely? What should I do? I'm afraid of losing my databases, is there anyway to recover the data? Thank you very much in advance. -----------EDIT------- These are the messages: alfonso@alfonso-laptop:/$ tail -F /var/log/syslog | grep Feb 15 15:08:01 alfonso-laptop init: mysql post-start process (15192) terminated with status Feb 15 15:08:01 alfonso-laptop init: mysql main process (15263) terminated with status Feb 15 15:08:01 alfonso-laptop init: mysql main process ended, Feb 15 15:08:31 alfonso-laptop init: mysql post-start process (15264) terminated with status Feb 15 15:08:31 alfonso-laptop init: mysql main process (15358) terminated with status Feb 15 15:08:31 alfonso-laptop init: mysql main process ended, Feb 15 15:09:01 alfonso-laptop init: mysql post-start process (15359) terminated with status Feb 15 15:09:01 alfonso-laptop init: mysql main process (15447) terminated with status Feb 15 15:09:01 alfonso-laptop init: mysql main process ended, Feb 15 15:09:32 alfonso-laptop init: mysql post-start process (15448) terminated with status 1 This is the content of error.log-old 110128 13:17:20 [Note] /usr/sbin/mysqld: Normal shutdown 110128 13:17:20 [Note] Event Scheduler: Purging the queue. 0 events 110128 13:17:20 InnoDB: Starting shutdown... 110128 13:17:22 InnoDB: Shutdown completed; log sequence number 0 590872 110128 13:17:22 [Note] /usr/sbin/mysqld: Shutdown complete 110214 2:08:18 [Note] Plugin 'FEDERATED' is disabled. 110214 2:08:19 InnoDB: Started; log sequence number 0 590872 110214 2:08:19 [Note] Event Scheduler: Loaded 0 events 110214 2:08:19 [Note] /usr/sbin/mysqld: ready for connections. Version: '5.1.41-3ubuntu12.8' socket: '/var/run/mysqld/mysqld.sock' port: 3306 (Ubuntu) -- Some links of similar problems https://bugs.launchpad.net/ubuntu/+source/mysql-dfsg-5.1/+bug/573318 http://www.linuxquestions.org/questions/linux-newbie-8/lamp-install-on-lucid-mysqld-sock-missing-mysql-terminating-status%3D1-853152/ It seems it's a permissions problem... But I don't know which permissions I should change... SOLVED -- mysql error 2002 "cannot connect to socket"

  Read the article

• Apache Mod_rewrite rule working on one server, but not another

  - by Mason

  I am using mod_jk and mod_rewrite on httpd 2.2.15. I have a rule.... RewriteCond %{REQUEST_URI} !^/video/play\.xhtml.* RewriteRule ^/video/(.*) /video/play.xhtml?vid=$1 [PT] I just want to rewrite something like /video/videoidhere to /video/play.xhtml?vid=videoidhere This works perfectly on my developer machine, but on production I get a 404 (generated by Jboss, not Apache). here is the tail of access.log and rewrite.log on prod (broken). the rewrite.log is exactly the same on dev(working) applying pattern '^/video/(.*)' to uri '/video/46279d4daf5440b2844ec831413dcc3b' RewriteCond: input='/video/46279d4daf5440b2844ec831413dcc3b' pattern='!^/video/play\.xhtml.*' => matched rewrite '/video/46279d4daf5440b2844ec831413dcc3b' -> '/video/play.xhtml?vid=46279d4daf5440b2844ec831413dcc3b' split uri=/video/play.xhtml?vid=46279d4daf5440b2844ec831413dcc3b -> uri=/video/play.xhtml, args=vid=46279d4daf5440b2844ec831413dcc3b forcing '/video/play.xhtml' to get passed through to next API URI-to-filename handler "GET /video/46279d4daf5440b2844ec831413dcc3b HTTP/1.1" 404 420 "-" "Mozilla/5.0 (X11; U; Linux x86_64; en-US; rv:1.9.2.6) Gecko/20100628 Ubuntu/10.04 (lucid) Firefox/3.6.6" I can access http://www.fivi.com/video/play.xhtml?vid=46279d4daf5440b2844ec831413dcc3b but not /video/46279d4daf5440b2844ec831413dcc3b Both server are even using the EXACT same httpd.conf, and modules. I built Apache with... ./configure --prefix /usr/local/apache2.2.15 --enable-alias --enable-rewrite --enable-cache --enable-disk_cache --enable-mem_cache --enable-ssl --enable-deflate Thanks, Mason ----UPDATE---- -mod-jk.conf JkWorkersFile /usr/local/apache2.2.15/conf/workers.properties JkLogFile /var/log/mod_jk.log JkLogLevel info JkLogStampFormat "[%a %b %d %H:%M:%S %Y]" JkOptions +ForwardKeySize +ForwardURICompatUnparsed -ForwardDirectories JkRequestLogFormat "%w %V %T" JkShmFile run/jk.shm <Location /jkstatus> JkMount status Order deny,allow Deny from all Allow from 127.0.0.1 </Location> -workers.properties worker.node1.port=8009 worker.node1.host=75.102.10.74 worker.node1.type=ajp13 worker.node1.lbfactor=20 worker.node1.ping_mode=A #As of mod_jk 1.2.27 worker.node2.port=8009 worker.node2.host=75.102.10.75 worker.node2.type=ajp13 worker.node2.lbfactor=10 worker.node2.ping_mode=A #As of mod_jk 1.2.27 worker.loadbalancer.type=lb worker.loadbalancer.balance_workers=node2,node1 worker.loadbalancer.sticky_session=True worker.status.type=status -httpd.conf ServerName www.fivi.com:80 Include /usr/local/apache2.2.15/conf/mod-jk.conf NameVirtualHost * <VirtualHost *> ServerName * DocumentRoot /usr/local/apache2/htdocs JkUnMount /* loadbalancer RedirectMatch 301 /(.*) http://www.fivi.com/$1 </VirtualHost> <VirtualHost *> ServerName www.fivi.com ServerAlias www.fivi.com images.fivi.com JkMount /* loadbalancer JkMount / loadbalancer [root@fivi conf]# /usr/local/apache2.2.15/bin/httpd -M Loaded Modules: core_module (static) authn_file_module (static) authn_default_module (static) authz_host_module (static) authz_groupfile_module (static) authz_user_module (static) authz_default_module (static) auth_basic_module (static) cache_module (static) disk_cache_module (static) mem_cache_module (static) include_module (static) filter_module (static) deflate_module (static) log_config_module (static) env_module (static) headers_module (static) setenvif_module (static) version_module (static) ssl_module (static) mpm_prefork_module (static) http_module (static) mime_module (static) status_module (static) autoindex_module (static) asis_module (static) cgi_module (static) negotiation_module (static) dir_module (static) actions_module (static) userdir_module (static) alias_module (static) rewrite_module (static) so_module (static) jk_module (shared) Syntax OK

  Read the article

• Optimal setup for ASUS P6X58D Premium BIOS (no OC)?

  - by rumtscho

  Normally, I'd trust the mainboard manufacturer to choose the best options as defaults. But I had trouble with the board, because even with Quick Boot enabled, it booted twice as slowly as a Pentium 4 Celeron. Then I changed lots of options at once (most of them weren't explained in the manual, just mentioned with a single sentence) and the boot time is only marginally worse than the Pentium 4 (54 sec against 46 sec from button to pw entering screen). Now I don't know if I have turned something off which should have stayed on. I guess I even won't be able to boot from a CD now, because even though it is present in the boot sequence, I took off a timeout I think it needs to check whether there is a disk in the drive. The second reason is that I don't have an internal HDD, only a SSD. I forgot my sources blush but I am under the impression that today's BIOS and OS options are geared toward booting from a HDD, which is often less than optimal when one boots from a SSD, especially when there are functions which cause avoidable writing cycles, as a SSD wears out after too many writing cycles. Most of the things I've read concern the OS, but there are some BIOS-relevant options too. I am especially confused about the disk mode. The board supports AHCI, IDE-simulation and RAID, but of the different articles I've read, there is a proponent for each and no clear arguments for any. So can one tell me which options are important in general and which are important for a SSD-only system? I don't want to overclock the CPU, so you don't have to say anything about this (yes I know the board is meant for OC:)). I am thinking of overclocking the RAM, since they sold me 1600er heatsinked modules which are running at 1066 now, but I'm not sure yet about that. The rest of the system: i7-930, Intel X25-m G2, 6 GB RAM, GTS 250, some no-name Blue-ray ROM. 2 external HDDs over USB 2.0. Lots of other USB-connected hardware (12 devices I think), no SATA 3 drives (will disabling the controller have an impact on performance?), no LAN, only WiFi. Lucid Lynx 64 bit, no dual boot, no virtual installations. The main uses of the system are: managing and playing/showing all the media stored on the external disks, lots of image manipulation, some video editing, a bit of (non-demanding) gaming, rarely development. Lots of Internet surfing too, but this shouldn't have much impact on performance.

  Read the article

• Why are the analoge stereo input and output of my M-Audio 24/96 soundcard not available to me in Ubu

  - by user37968

  I have installed Lucid on an old Mac PowerPC G4 desktop with a M-Audio Audiophile 24/96 soundcard. The only inputs and outputs I can select in the audio preferences are digital ones for the digital input and output. "lspci -v" shows the card as so: 0001:10:13.0 Multimedia audio controller: VIA Technologies Inc. ICE1712 [Envy24] PCI Multi-Channel I/O Controller (rev 02) Subsystem: VIA Technologies Inc. Device d634 Flags: bus master, medium devsel, latency 16, IRQ 53 I/O ports at 0440 [size=32] I/O ports at 04b0 [size=16] I/O ports at 04a0 [size=16] I/O ports at 0400 [size=64] Capabilities: <access denied> Kernel driver in use: ICE1712 Kernel modules: snd-ice1712 "cat /proc/asound/cards" as so: 0 [Tumbler ]: PMac Tumbler - PowerMac Tumbler PowerMac Tumbler (Dev 21) Sub-frame 0 1 [M2496 ]: ICE1712 - M Audio Audiophile 24/96 M Audio Audiophile 24/96 at 0x440, irq 53 "aplay -L" shows these as listed: pulse Playback/recording through the PulseAudio sound server front:CARD=Tumbler,DEV=0 PowerMac Tumbler, PowerMac Tumbler Front speakers front:CARD=M2496,DEV=0 M Audio Audiophile 24/96, ICE1712 multi Front speakers surround40:CARD=M2496,DEV=0 M Audio Audiophile 24/96, ICE1712 multi 4.0 Surround output to Front and Rear speakers surround41:CARD=M2496,DEV=0 M Audio Audiophile 24/96, ICE1712 multi 4.1 Surround output to Front, Rear and Subwoofer speakers surround50:CARD=M2496,DEV=0 M Audio Audiophile 24/96, ICE1712 multi 5.0 Surround output to Front, Center and Rear speakers surround51:CARD=M2496,DEV=0 M Audio Audiophile 24/96, ICE1712 multi 5.1 Surround output to Front, Center, Rear and Subwoofer speakers iec958:CARD=M2496,DEV=0 M Audio Audiophile 24/96, ICE1712 multi IEC958 (S/PDIF) Digital Audio Output I believe it is a problem with detecting the analogue input/output. Sometimes I can get sound from the device but it is a sheet of white noise and tinkering makes it go away again I don't know if that is a separate problem or if it is linked to not being able to see the analogue input/outputs in the sound preferences. Any help would be greatly appreciated As for the white noise I have installed the Envy24 control panel and spend lots of time playing with the settings but when I can get the white noise I can never get it to an quality where I can actually hear what is being played. The internal speaker plays audio fine and plugging in a NI Audio 4DJ via usb also plays sound, although with some static but I believe that is due to an underpowered usb2 pci expansion card not being able to get enough electricity to the device. Alternatively I have seen other people with problems with this device so it may be a bug in the driver but that is another matter. I would like to get the M-Audio card working so I can begin to enjoy my music once again. As a note, I do not currently have any audio equipment capable of sending or receiving audio via the digital inputs and output so I can not check if they are working. The sound preferences show a wide range of digital in and out options with various surround sound options but no analogue ins and outs.

  Read the article

• Trouble using gitweb with nginx

  - by Rayne

  I have a git repository in a directory inside of /home/raynes/pubgit/. I'm trying to use gitweb to provide a web interface to it. I use nginx as my web server for everything else, so I don't really want to have to use another just for this. I'm mostly following this guide: http://michalbugno.pl/en/blog/gitweb-nginx, which is the only guide I can find via google and is really recent. fcgiwrap apparently isn't in Lucid Lynx's repositories, so I installed it manually. I spawn instances via spawn-fcgi: spawn-fcgi -f /usr/local/sbin/fcgiwrap -a 127.0.0.1 -p 9001 That's all good. My /etc/gitweb.conf is as follows: # path to git projects (<project>.git) #$projectroot = "/home/raynes/pubgit"; $my_uri = "http://mc.raynes.me"; $home_link = "http://mc.raynes.me/"; # directory to use for temp files $git_temp = "/tmp"; # target of the home link on top of all pages #$home_link = $my_uri || "/"; # html text to include at home page $home_text = "indextext.html"; # file with project list; by default, simply scan the projectroot dir. $projects_list = $projectroot; # stylesheet to use $stylesheet = "/gitweb/gitweb.css"; # logo to use $logo = "/gitweb/git-logo.png"; # the 'favicon' $favicon = "/gitweb/git-favicon.png"; And my nginx server configuration is this: server { listen 80; server_name mc.raynes.me; location / { root /usr/share/gitweb; if (!-f $request_filename) { fastcgi_pass 127.0.0.1:9001; } fastcgi_index index.cgi; fastcgi_param SCRIPT_FILENAME /scripts$fastcgi_script_name; include fastcgi_params; } } The only difference here is that I've set fastcgi_pass to 127.0.0.1:9001. When I go to http://mc.raynes.me I'm greeted with a page that simply says "403" and nothing else. I have not the slightest clue what I did wrong. Any ideas?

  Read the article

• How to setup ssh's umask for all type of connections

  - by Unode

  I've been searching for a way to setup OpenSSH's umask to 0027 in a consistent way across all connection types. By connection types I'm referring to: sftp scp ssh hostname ssh hostname program The difference between 3. and 4. is that the former starts a shell which usually reads the /etc/profile information while the latter doesn't. In addition by reading this post I've became aware of the -u option that is present in newer versions of OpenSSH. However this doesn't work. I must also add that /etc/profile now includes umask 0027. Going point by point: sftp - Setting -u 0027 in sshd_config as mentioned here, is not enough. If I don't set this parameter, sftp uses by default umask 0022. This means that if I have the two files: -rwxrwxrwx 1 user user 0 2011-01-29 02:04 execute -rw-rw-rw- 1 user user 0 2011-01-29 02:04 read-write When I use sftp to put them in the destination machine I actually get: -rwxr-xr-x 1 user user 0 2011-01-29 02:04 execute -rw-r--r-- 1 user user 0 2011-01-29 02:04 read-write However when I set -u 0027 on sshd_config of the destination machine I actually get: -rwxr--r-- 1 user user 0 2011-01-29 02:04 execute -rw-r--r-- 1 user user 0 2011-01-29 02:04 read-write which is not expected, since it should actually be: -rwxr-x--- 1 user user 0 2011-01-29 02:04 execute -rw-r----- 1 user user 0 2011-01-29 02:04 read-write Anyone understands why this happens? scp - Independently of what is setup for sftp, permissions are always umask 0022. I currently have no idea how to alter this. ssh hostname - no problem here since the shell reads /etc/profile by default which means umask 0027 in the current setup. ssh hostname program - same situation as scp. In sum, setting umask on sftp alters the result but not as it should, ssh hostname works as expected reading /etc/profile and both scp and ssh hostname program seem to have umask 0022 hardcoded somewhere. Any insight on any of the above points is welcome. EDIT: I would like to avoid patches that require manually compiling openssh. The system is running Ubuntu Server 10.04.01 (lucid) LTS with openssh packages from maverick. Answer: As indicated by poige, using pam_umask did the trick. The exact changes were: Lines added to /etc/pam.d/sshd: # Setting UMASK for all ssh based connections (ssh, sftp, scp) session optional pam_umask.so umask=0027 Also, in order to affect all login shells regardless of if they source /etc/profile or not, the same lines were also added to /etc/pam.d/login. EDIT: After some of the comments I retested this issue. At least in Ubuntu (where I tested) it seems that if the user has a different umask set in their shell's init files (.bashrc, .zshrc,...), the PAM umask is ignored and the user defined umask used instead. Changes in /etc/profile did't affect the outcome unless the user explicitly sources those changes in the init files. It is unclear at this point if this behavior happens in all distros.

  Read the article

• VMware server 2.0 SYN/ACK repeating issues

  - by user65579

  VMWare Server 2.0.0 Build 122956 I am having some issues with connecting into a guest VM (Ubuntu linux 4.4.3-4 lucid) running under VMware 2.0 on a windows server host. All connections to and from the VM's work fine, except for FTP. I thought the issue was the FTP daemon at first but it has been ruled out that it is not the daemon or the server itself. When you try to connect to the FTP server from outside of the host OS it fails with a "421 Service not available" but when you try and connect from the local VM or from the host OS the connection goes through fine. I have ran many packet sniffs using wireshark/tcpdump from the VM, the host OS, and the client connecting, the most informative is the host OS. I have attached a PNG of the relavant packets that were captured. I viewed some other network traffic that was sniffed (WWW specifically) and it seems to do the same syn/ack repeating but the user doesnt see any issues. I have disabled the firewall and the issues persisits, I have tried with specific allow rules to ensure the data is allowed and no changes. It appears like VMware attempts to do the ICMP redirect and it works, but then it vmware repeats the packets sent so you get 3 syn/ack's for every one syn from the client. Also VMWare appears to be attempting to establish an FTP connection between the HOST OS and the GUEST OS, because I see the second SYN sent from the HOST OS to the GUEST to initiate a new connection, and it get the appropriate SYN/ACK followed by an ACK, but the client never sees any of this from its end. EG. syn from client syn/ack from host OS to client syn/ack from guest OS to client syn/ack from host OS to client The same thing happens when the connection reset is attempted, RST's start being sent and repeated, the server responds with a valid header to continue the FTP handshake but the RST acknowledgement is allready issued and things are closed. I am not 100% if this is a bug in VMware or possibly a VMNetwork missconfiguration. Does anyone have any thoughts on where exactly the issue could be, things to try to verify or rule out? I have linked to a picture of the relevant packets sniffed from the host OS. http://img18.imageshack.us/img18/7789/vmwareftpconnection.jpg

  Read the article

• Ubuntu getting wrong hostname from DHCP

  - by sam

  When provisioning new Ubuntu Precise (12.04) servers, the hostname they're getting seems to be generated from the DNS search path, not a reverse lookup on the hostname. Take the following configuration BIND is configured with the hostname, and reverse name Normal zone $TTL 600 $ORIGIN srv.local.net. @ IN SOA ns0.local.net. hostmaster.local.net. ( 2014082101 10800 3600 604800 600 ) @ IN NS ns0.local.net. @ IN MX 5 mail.local.net. my-new-server IN A 10.32.2.30 And reverse @ IN SOA ns0.local.net. hostmaster.local.net. ( 2014082101 10800 3600 604800 600 ) @ IN NS ns0.local.net. $ORIGIN 32.10.in-addr.arpa. 30.2 IN PTR my-new-server.srv.local.net. Then DHCPD is configured to hand out static leases based on mac addresses like so subnet 10.32.2.0 netmask 255.255.254.0 { option subnet-mask 255.255.254.0; option routers 10.32.2.1; option domain-name-servers 10.32.2.1; option domain-name "util.of1.local.net of1.local.net srv.local.net"; site-option-space "pxelinux"; option pxelinux.magic f1:00:74:7e; if exists dhcp-parameter-request-list { option dhcp-parameter-request-list = concat(option dhcp-parameter-request-list,d0,d1,d2,d3); } group { option pxelinux.configfile "pxelinux.cfg/pxeboot"; host my-new-server { fixed-address my-new-server.srv.local.net; hardware ethernet aa:aa:aa:bb:bb:bb; } } } So the hostname should be my-new-server.srv.local.net, however when building a Ubuntu 12.04 node, the hostname ends up as my-new-server.util.of1.local.net When building Lucid (10.04) hosts, the hostname will be correct, it's only on Precise/12.04 nodes we have the problem. Doing a normal and reverse lookup on the host and IP returns the correct result Sams-MacBook-Pro:~ sam$ host my-new-server my-new-server.srv.local.net has address 10.32.2.30 Sams-MacBook-Pro:~ sam$ host my-new-server.srv.local.net my-new-server.srv.local.net has address 10.32.2.30 Sams-MacBook-Pro:~ sam$ host 10.32.2.30 30.2.32.10.in-addr.arpa domain name pointer my-new-server.srv.local.net. The contents of the hosts file is incorrect too 127.0.0.1 localhost 127.0.1.1 my-new-server.util.of1.local.net of1.local.net srv.local.net my-new-server So it looks like when it creates the hosts file, it puts the entire contents of the DNS search path into the local address so the FQDN according to the server is the short hostname as defined, then the first domain in the search path. Is there a way to get around this behaviour, or fix this so it gets the hostname correctly? It's picking up the first part of the hostname, then the rest is wrong.

  Read the article

• Fix single entry from mbr

  - by Sander

  I use EasyBCD to manage my tripleboot of (1) Windows Server 2008 R2, (2) Windows 7 Professional and (3) Ubuntu Linux. While trying to change the order of my boot menu I ended up losing the Windows Server entry. Luckily I had a boot menu backup (.bcd file) that allowed me to restore my boot menu using EasyBCD. However, when I now select the Windows Server option in my boot menu the Windows Server Recovery Environment starts up. So I have to select language/keyboard layout/etc. and then I have 3 options as shown in the image below. . My goal is to fix the one corrupted Windows Server entry from my boot menu without messing up or losing the two other ones. I'm guessing the Recovery Console (Command Prompt) is the next step and that I will be needing bootrec.exe. But when consulting this page: Use the Bootrec.exe tool in the Windows Recovery Environment to troubleshoot and repair startup issues in Windows (about half way down there's a link that shows the bootrec.exe options) I'm getting uncertain. The page lists 4 options for bootrec.exe : /FixMbr /FixBoot /ScanOs /RebuildBcd What option do I need to fix just the server entry of my boot menu? Thanks in advance, Sander P.S. All three OS's are on the same physical disk (3 different partitions). Disk layout: System reserved (primary partition, 100 MB) Windows 7 (primary parition, 150 GB) Windows Server 2008 (primary partition, 150 GB) Extended partition (linux partitions (/,/swap,/home), 150GB + data partition, 150 GB) P.P.S. This is what my boot menu looks like using EasyBCD (Detailed/Debug mode) on my Windows 7 installation. Windows Boot Manager -------------------- identifier {9dea862c-5cdd-4e70-acc1-f32b344d4795} device partition=\Device\HarddiskVolume1 description Windows Boot Manager locale en-US inherit {7ea2e1ac-2e61-4728-aaa3-896d9d0a9f0e} default {93f90e43-cae8-11df-b05a-c9177e705936} resumeobject {93f90e3e-cae8-11df-b05a-c9177e705936} displayorder {93f90e43-cae8-11df-b05a-c9177e705936} {93f90e3f-cae8-11df-b05a-c9177e705936} {93f90e46-cae8-11df-b05a-c9177e705936} toolsdisplayorder {b2721d73-1db4-4c62-bf78-c548a880142d} timeout 10 displaybootmenu Yes Windows Boot Loader ------------------- identifier {93f90e43-cae8-11df-b05a-c9177e705936} device partition=\Device\HarddiskVolume3 path \Windows\system32\winload.exe description Windows Server 2008 R2 - Standard locale en-US inherit {6efb52bf-1766-41db-a6b3-0ee5eff72bd7} recoverysequence {93f90e44-cae8-11df-b05a-c9177e705936} recoveryenabled Yes osdevice partition=\Device\HarddiskVolume3 systemroot \Windows resumeobject {93f90e42-cae8-11df-b05a-c9177e705936} nx OptOut Windows Boot Loader ------------------- identifier {93f90e3f-cae8-11df-b05a-c9177e705936} device partition=C: path \Windows\system32\winload.exe description Windows 7 - Professional locale nl-NL inherit {6efb52bf-1766-41db-a6b3-0ee5eff72bd7} recoverysequence {93f90e40-cae8-11df-b05a-c9177e705936} recoveryenabled Yes osdevice partition=C: systemroot \Windows resumeobject {93f90e3e-cae8-11df-b05a-c9177e705936} nx OptIn Real-mode Boot Sector --------------------- identifier {93f90e46-cae8-11df-b05a-c9177e705936} device partition=C: path \NST\AutoNeoGrub0.mbr description Ubuntu 10.04 - Lucid Lynx

  Read the article

• Linux bonded Interfaces hanging periodically

  - by David

  I've several hosts that are showing problems with connectivity. When working from the command line, for example, typing is frozen for a second or so, then recovers - then it does it again. The most egregious example host would freeze (input) for 15-30 seconds, then recover and go out 5 seconds later. Switching cables didn't do anything - but removing one of the physical cables caused everything to clear up instantly (which why I think this is a network problem). Looking at the network I couldn't see any packets floating that would explain this. These ethernet interfaces (Gigabit Dell) were working normally previously, but since we moved the systems - and put them on a new set of switches - this has been a problem on multiple theoretically identically-configured hosts. The original switches were an HP Procurve 1810-24G and an HP Procurve 1800-24G connected with LLDP; the new switches are both Cisco SG 200-26, which I understand are rebranded Linksys switches. Is this caused by a problem with the switches? Is it the switch configurations? Are the Cisco switches incapable of handling this? I don't see where the configuration is located; I searched the usual /etc/sysconfig/network/devices but there's nothing in there about options (like mii polling) and nothing about the method of balancing the two. Searching scripts, I can't find anything in /etc/init.d/network either. The hosts are almost all Red Hat Enterprise Linux 5.x systems (5.6, 5.7) but some are Ubuntu Server 10.04.3 Lucid Lynx. I need help with both if it comes to that. UPDATE: We're also seeing some problems with servers on the original switches. The HP switches and the Cisco switches are also interconnected (temporarily); there is a cable run from one switch to the next. Pings on any of these hosts show about one ICMP packet out of every 5-6 getting dropped (timed out). Could there be an interaction between the two switches? Oh, and the hosts are using bonding with Balance-RR as the method.

  Read the article

• Complete machine freezes...at a loss

  - by user28818

  Guys, We built around 12 machines a few months ago to run Ubuntu. They each have the following specs: ASUS Z8NA-D6 motherboard Dual quad core Intel(R) Xeon(R) CPU E5520 @ 2.27GHz OCZ Mod Extreme Pro 500W power supply 12 GB Kingston RAM Nvidia GeForce 9800 GT graphics card My machine ran well for awhile. However, it started experiencing random lockups. These lockups are not X lockups, they are complete system freezes. The nic stops responding, the magic sysrq buttons won't work. The machine is dead. I first suspected RAM. Memtest86 didn't find anything, but I replaced the RAM anyway. Still, lockups. So I replaced the graphics card. Still, more lockups. They became more and more frequent and started to happen 2-3 times a day. So I replaced the motherboard and power supply in one fell swoop. Suddenly, no more lockups! Woohoo! Except, a week later, in the morning, the machine wouldn't wake up. I reset it, started it up, and the log files showed the last entry at around 11 pm the evening before. This has started occurring with more frequency...now just about every morning I come in, the machine is locked up, and has been since the night before. Yesterday, in the 3 weeks since I replaced the motherboard and power supply, the machine actually locked up on in in mid-work. This is the first time since replacing the two (MB and PS) that this happened while I was using it. All others occurred while I was away. I'm at a loss. Nothing is in syslog or message that would indicate a problem around the time of the lockup. Temps are good...I use lmsensors to monitor and have a script that writes the output to file every minute. They never get that high. The only thing I haven't replaced at this point is the case and the harddrives. I doubt either could be the cause. What would you do if you were in my shoes? Is there a troubleshooting approach I'm missing? For the record, all of the other machines, all eleven of them, don't have any problems. They're all running the same version of Ubuntu (Lucid) that I am. Thanks!

  Read the article

• Multi Monitor Setup Problems

  - by Shamballa

  I have Ubuntu 10.04 LTS - the Lucid Lynx. I have until recently been using a nVida Graphics card (NVIDIA GeForce 9800 GT) with two monitors attached, this all worked fine and dandy. A couple of days ago I bought two new identical LCD monitors for a multi monitor setup and two ATI graphics cards (ATI Sapphire Radeon HD5450). NOTE *All monitors work fine in Windows XP, 2k, Vista and 7 After I had booted into Ubuntu only one display came on, that I kind of expected anyway, then I removed the driver for the nVidia card and downloaded the ATI version which gave me the ATI Catalyst Control Center - in that only two of the displays were showing the third was disabled and showing unknown driver. I enabled the third monitor that stated "Unkown Driver" and had to reboot, upon reboot none of the displays work. I restarted and booted up into recovery mode and from now that is only what I can get into using a failsafe driver. It seems according to the log that a server is already active for Display 0 and I have to remove /tmp/.X0-lock and start again. This is what the log file is saying: Fatal Server Error Server is already active for display 0 if this server is no longer running, remove /tmp/.X0-lock and start again. (WW) xf86 closeconsole: KDSETMODE failed: Bad file descriptor (WW) xf86 closeconsole: VT_GETMODE failed: Bad file descriptor (WW) xf86 closeconsole: VT_GETSTATE failed: Bad file descriptor ddxSigGiveUp: closing log I have tried looking at my xorg.config file but unfortunately I have not really got a clue as to how it "should" be - I have tried regenerating it using this command from a terminal: sudo dpkg-reconfigure -phigh xserver-xorg but that had no effect so I am currently stuck in failsafe driver mode but two monitors are active but are mirroring each other. I hope that this is not to long - looking back I have been going on a bit! but I am just trying to explain as much as I can... I have asked this on Linuxquestions but nobody seems to know either or at least I have not had any responses. Could some kind soul please help explain what I can do from here? I would be eternally grateful. Chris * Update * Removing xorg.conf does nothing other than allowing me to use only two monitors - using the command: sudo aticonfig --initial generates the xorg.conf file below: but does not work either - I just get two monitors... Section "ServerLayout" Identifier "aticonfig Layout" Screen 0 "aticonfig-Screen[0]-0" 0 0 EndSection Section "Files" EndSection Section "Module" EndSection Section "Monitor" Identifier "aticonfig-Monitor[0]-0" Option "VendorName" "ATI Proprietary Driver" Option "ModelName" "Generic Autodetecting Monitor" Option "DPMS" "true" EndSection Section "Device" Identifier "aticonfig-Device[0]-0" Driver "fglrx" BusID "PCI:1:0:0" EndSection Section "Screen" Identifier "aticonfig-Screen[0]-0" Device "aticonfig-Device[0]-0" Monitor "aticonfig-Monitor[0]-0" DefaultDepth 24 SubSection "Display" Viewport 0 0 Depth 24 EndSubSection EndSection I have tried using this command from a thread on the Ubuntu Forums with a question similar to mine: sudo aticonfig --initial=dual-head --adapter=all Generated xorg.conf file Section "ServerLayout" Identifier "aticonfig Layout" Screen 0 "aticonfig-Screen[0]-0" 0 0 Screen "aticonfig-Screen[0]-1" RightOf "aticonfig-Screen[0]-0" Screen "aticonfig-Screen[1]-0" RightOf "aticonfig-Screen[0]-1" Screen "aticonfig-Screen[1]-1" RightOf "aticonfig-Screen[1]-0" EndSection Section "Files" EndSection Section "Module" EndSection Section "Monitor" Identifier "aticonfig-Monitor[0]-0" Option "VendorName" "ATI Proprietary Driver" Option "ModelName" "Generic Autodetecting Monitor" Option "DPMS" "true" EndSection Section "Monitor" Identifier "aticonfig-Monitor[0]-1" Option "VendorName" "ATI Proprietary Driver" Option "ModelName" "Generic Autodetecting Monitor" Option "DPMS" "true" EndSection Section "Monitor" Identifier "aticonfig-Monitor[1]-0" Option "VendorName" "ATI Proprietary Driver" Option "ModelName" "Generic Autodetecting Monitor" Option "DPMS" "true" EndSection Section "Monitor" Identifier "aticonfig-Monitor[1]-1" Option "VendorName" "ATI Proprietary Driver" Option "ModelName" "Generic Autodetecting Monitor" Option "DPMS" "true" EndSection Section "Device" Identifier "aticonfig-Device[0]-0" Driver "fglrx" BusID "PCI:1:0:0" EndSection Section "Device" Identifier "aticonfig-Device[0]-1" Driver "fglrx" BusID "PCI:1:0:0" Screen 1 EndSection Section "Device" Identifier "aticonfig-Device[1]-0" Driver "fglrx" BusID "PCI:2:0:0" EndSection Section "Device" Identifier "aticonfig-Device[1]-1" Driver "fglrx" BusID "PCI:2:0:0" Screen 1 EndSection Section "Screen" Identifier "aticonfig-Screen[0]-0" Device "aticonfig-Device[0]-0" Monitor "aticonfig-Monitor[0]-0" DefaultDepth 24 SubSection "Display" Viewport 0 0 Depth 24 EndSubSection EndSection Section "Screen" Identifier "aticonfig-Screen[0]-1" Device "aticonfig-Device[0]-1" Monitor "aticonfig-Monitor[0]-1" DefaultDepth 24 SubSection "Display" Viewport 0 0 Depth 24 EndSubSection EndSection Section "Screen" Identifier "aticonfig-Screen[1]-0" Device "aticonfig-Device[1]-0" Monitor "aticonfig-Monitor[1]-0" DefaultDepth 24 SubSection "Display" Viewport 0 0 Depth 24 EndSubSection EndSection Section "Screen" Identifier "aticonfig-Screen[1]-1" Device "aticonfig-Device[1]-1" Monitor "aticonfig-Monitor[1]-1" DefaultDepth 24 SubSection "Display" Viewport 0 0 Depth 24 EndSubSection EndSection This upon reboot renders ALL monitors blank and I have to go into recovery mode and use a failsafe driver. This is so much harder than I thought it would be, I don't think Ubuntu likes ATI for multi (3) monitors or maybe the other way around. Can anyone help still?

  Read the article

• Mouse wheel not scrolling in JDialog but working in JFrame

  - by Iulian Serbanoiu

  Hello, I'm facing a frustrating issue. I have an application where the scroll wheel doesn't work in a JDialog window (but works in a JFrame). Here's the code: import javax.swing.*; import java.awt.event.*; public class Failtest extends JFrame { public static void main(String[] args) { new Failtest(); } public Failtest() { super(); setDefaultCloseOperation(JFrame.DISPOSE_ON_CLOSE); setTitle("FRAME"); JScrollPane sp1 = new JScrollPane(getNewList()); add(sp1); setSize(150, 150); setVisible(true); JDialog d = new JDialog(this, false);// NOT WORKING //JDialog d = new JDialog((JFrame)null, false); // NOT WORKING //JDialog d = new JDialog((JDialog)null, false);// WORKING - WHY? d.setTitle("DIALOG"); d.setDefaultCloseOperation(JDialog.DISPOSE_ON_CLOSE); JScrollPane sp = new JScrollPane(getNewList()); d.add(sp); d.setSize(150, 150); d.setVisible(true); } public JList getNewList() { String objs[] = new String[30]; for(int i=0; i<objs.length; i++) { objs[i] = "Item "+i; } JList l = new JList(objs); return l; } } I found a solution which is present as a comment in the java code - the constructor receiving a (JDialog)null parameter. Can someone enlighten me? My opinion is that this is a java bug. Tested on Windows XP-SP3 with 1 JDK and 2 JREs: D:\Program Files\Java\jdk1.6.0_17\bin>javac -version javac 1.6.0_17 D:\Program Files\Java\jdk1.6.0_17\bin>java -version java version "1.6.0_17" Java(TM) SE Runtime Environment (build 1.6.0_17-b04) Java HotSpot(TM) Client VM (build 14.3-b01, mixed mode, sharing) D:\Program Files\Java\jdk1.6.0_17\bin>cd .. D:\Program Files\Java\jdk1.6.0_17>java -version java version "1.6.0_18" Java(TM) SE Runtime Environment (build 1.6.0_18-b07) Java HotSpot(TM) Client VM (build 16.0-b13, mixed mode, sharing) Thank you in advance, Iulian Serbanoiu PS: The problem is not new - the code is taken from a forum (here) where this problem was also mentioned - but no solutions to it (yet) LATER EDIT: The problem persists with jre/jdk_1.6.0_10, 1.6.0_16 also LATER EDIT 2: Back home, tested on linux (Ubuntu - lucid/lynx) - both with openjdk and sun-java from distribution repo and it works (I used the .class file compiled on Windows) !!! - so I believe I'm facing a JRE bug that happens on some Windows configurations.

  Read the article

• Error after installing Django (supposed PATH or PYTHONPATH "error")

  - by illuminated

  Hi all, I guess this is a PATH/PYTHONPATH error, but my attempts failed so far to make django working. System is Ubuntu 10.04, 64bit: mx:~/webapps$ cat /etc/lsb-release DISTRIB_ID=Ubuntu DISTRIB_RELEASE=10.04 DISTRIB_CODENAME=lucid DISTRIB_DESCRIPTION="Ubuntu 10.04 LTS" Python version: 2.6.5: @mx:~/webapps$ python -V Python 2.6.5 When I run django-admin.py, the following happens: mx:~/webapps$ django-admin.py Traceback (most recent call last): File "/usr/local/bin/django-admin.py", line 2, in <module> from django.core import management ImportError: No module named django.core Similar when I import django in python shell: mx:~/webapps$ python Python 2.6.5 (r265:79063, Apr 16 2010, 13:09:56) [GCC 4.4.3] on linux2 Type "help", "copyright", "credits" or "license" for more information. >>> import django Traceback (most recent call last): File "<stdin>", line 1, in <module> ImportError: No module named django >>> quit() More details: mx:~/webapps$ python -c "from distutils.sysconfig import get_python_lib; print get_python_lib()" /usr/lib/python2.6/dist-packages Within python shell: Python 2.6.5 (r265:79063, Apr 16 2010, 13:09:56) [GCC 4.4.3] on linux2 Type "help", "copyright", "credits" or "license" for more information. >>> import sys >>> print sys.path ['', '/usr/lib/python2.6/dist-packages/django', '/usr/local/lib/python2.6/dist-packages/django/bin', '/usr/local/lib/python2.6/dist-packages/django', '/home/petra/webapps', '/usr/lib/python2.6', '/usr/lib/python2.6/plat-linux2', '/usr/lib/python2.6/lib-tk', '/usr/lib/python2.6/lib-old', '/usr/lib/python2.6/lib-dynload', '/usr/lib/python2.6/dist-packages', '/usr/lib/python2.6/dist-packages/PIL', '/usr/lib/pymodules/python2.6'] django-admin.py can be found here: mx:~/webapps$ locate django-admin.py ~/install/sources/Django-1.2.1/build/lib.linux-i686-2.6/django/bin/django-admin.py ~/install/sources/Django-1.2.1/build/scripts-2.6/django-admin.py ~/install/sources/Django-1.2.1/django/bin/django-admin.py /usr/local/bin/django-admin.py /usr/local/lib/python2.6/dist-packages/django/bin/django-admin.py /usr/local/lib/python2.6/dist-packages/django/bin/django-admin.pyc and in the end this doesn't help: export PYTHONPATH="/usr/lib/python2.6/dist-packages/django:$PYTHONPATH" nor this: export PYTHONPATH="/usr/local/lib/python2.6/dist-packages/django:$PYTHONPATH" How to solve this !? Thanks all in advance! :)

  Read the article

• Python and displaying HTML

  - by Tyler Seymour

  I've gotten pretty comfortable with Python and now I'm looking to make a rudimentary web application. I was somewhat scared of Django and the other Python frameworks so I went caveman on it and decided to generate the HTML myself using another Python script. Maybe this is how you do it anyways - but I'm just figuring this stuff out. I'm really looking for a tip-off on, well, what to do next. My Python script PRINTS the HTML (is this even correct? I need it to be on a webpage!), but now what? Thanks for your continued support during my learning process. One day I will post answers! -Tyler Here's my code: from SearchPhone import SearchPhone phones = ["Iphone 3", "Iphone 4", "Iphone 5","Galaxy s3", "Galaxy s2", "LG Lucid", "LG Esteem", "HTC One S", "Droid 4", "Droid RAZR MAXX", "HTC EVO", "Galaxy Nexus", "LG Optimus 2", "LG Ignite", "Galaxy Note", "HTC Amaze", "HTC Rezound", "HTC Vivid", "HTC Rhyme", "Motorola Photon", "Motorola Milestone", "myTouch slide", "HTC Status", "Droid 3", "HTC Evo 3d", "HTC Wildfire", "LG Optimus 3d", "HTC ThunderBolt", "Incredible 2", "Kyocera Echo", "Galaxy S 4g", "HTC Inspire", "LG Optimus 2x", "Samsung Gem", "HTC Evo Shift", "Nexus S", "LG Axis", "Droid 2", "G2", "Droid x", "Droid Incredible" ] print """<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd"> <html xmlns="http://www.w3.org/1999/xhtml"> <head> <meta http-equiv="Content-Type" content="text/html; charset=utf-8" /> <title>table of phones</title> </head> <body> </body> </html> """ #table print '<table width="100%" border="1">' for x in phones: y = SearchPhone(x) print "\t<tr>" print "\t\t<td>" + str(y[0]) + "</td>" print "\t\t<td>" + str(y[1]) + "</td>" print "\t\t<td>" + str(y[2]) + "</td>" print "\t\t<td>" + str(y[3]) + "</td>" print "\t\t<td>" + str(y[4]) + "</td>" print "\t</tr>" print "</table>

  Read the article

• How to start dovecot?

  - by chudapati09

  I'm building a web server to host multiple websites. I got everything working except the mail server. I'm using linode to host my vps and I've been following their tutorials. FYI, I'm using Ubuntu 11.10. Here is the link I've been following, http://library.linode.com/email/postfix/dovecot-mysql-ubuntu-10.04-lucid. I got up to the part where it tells me to restart dovecot, so I tried "service dovecot restart". But then I get this "restart: Unknown instance:". I'm logged in as root, so I'm not using sudo. Since that didn't work I tried "/etc/init.d/dovecot restart" and I get "dovecot start/running, process 4760". So I try "/etc/init.d/dovecot status" and I get "dovecot stop/waiting". So I tried "service dovecot start" and I get "dovecot start/running, process 4781". So I tried to get the status, so I tired "service dovecot status" and got "dovecot stop/waiting" Then I tired "/etc/init.d/dovecot start" and I get "dovecot start/running, process 4794". So I tired to get the status, so I tired "/etc/init.d/dovecot status" and got "dovecot stop/waiting" Just for kicks and giggles I tired to kill the process, I used the PID that I got when I did "service dovecot start", this was the command "kill -9 4444" and I get this "bash: kill: (4805) - No such process" Am I doing something wrong? --EDIT 1-- The following are logs that were found in /var/log/syslog that involved dovecot dovecot: master: Dovecot v2.0.13 starting up (core dumps disabled) dovecot: ssl-params: Generating SSL parameters dovecot: ssl-params: SSL parameters regeneration completed dovecot: master: Warning: Killed with signal 15 (by pid=1 uid=0 code=kill) dovecot: config: Warning: Killed with signal 15 (by pid=1 uid=0 code=kill) dovecot: anvil: Warning: Killed with signal 15 (by pid=1 uid=0 code=kill) dovecot: log: Warning: Killed with signal 15 (by pid=1 uid=0 code=kill) kernel: init: dovecot main process (10276) terminated with status 89 kernel: init: dovecot main process (10289) terminated with status 89 kernel: init: dovecot main process (10452) terminated with status 89 kernel: init: dovecot main process (2275) terminated with status 89 kernel: init: dovecot main process (3028) terminated with status 89 kernel: init: dovecot main process (3216) terminated with status 89 kernel: init: dovecot main process (3230) terminated with status 89 kernel: init: dovecot main process (3254) terminated with status 89 kernel: init: dovecot main process (3813) terminated with status 89 kernel: init: dovecot main process (3845) terminated with status 89 kernel: init: dovecot main process (4664) terminated with status 89 kernel: init: dovecot main process (4760) terminated with status 89 kernel: init: dovecot main process (4781) terminated with status 89 kernel: init: dovecot main process (4794) terminated with status 89 kernel: init: dovecot main process (4805) terminated with status 89 --Edit 2 (/etc/dovecot/dovecot.conf)-- The following is the dovecot.conf file protocols = imap imaps pop3 pop3s log_timestamp = "%Y-%m-%d %H:%M:%S " mail_location = maildir:/home/vmail/%d/%n/Maildir ssl_cert_file = /etc/ssl/certs/dovecot.pem ssl_key_file = /etc/ssl/private/dovecot.pem namespace private { separator = . prefix = INBOX. inbox = yes } protocol lda { log_path = /home/vmail/dovecot-deliver.log auth_socket_path = /var/run/dovecot/auth-master postmaster_address = postmaster@[mydomainname.com] mail_plugins = sieve global_script_path = /home/vmail/globalsieverc } protocol pop3 { pop3_uidl_format = %08Xu%08Xv } auth default { user = root passdb sql { args = /etc/dovecot/dovecot-sql.conf } userdb static { args = uid=5000 gid=5000 home=/home/vmail/%d/%n allow_all_users=yes } socket listen { master { path = /var/run/dovecot/auth-master mode = 0600 user = vmail } client { path = /var/spool/postfix/private/auth mode = 0660 user = postfix group = postfix } } } -- Edit 3 (/var/log/mail.log) -- The following is what is in /var/log/mail.log dovecot: master: Dovecot v2.0.13 starting up (core dumps disabled) dovecot: ssl-params: Generating SSL parameters postfix/master[9917]: daemon started -- version 2.8.5, configuration /etc/postfix dovecot: ssl-params: SSL parameters regeneration completed postfix/master[9917]: terminating on signal 15 postfix/master[10196]: daemon started -- version 2.8.5, configuration /etc/postfix dovecot: master: Warning: Killed with signal 15 (by pid=1 uid=0 code=kill) dovecot: config: Warning: Killed with signal 15 (by pid=1 uid=0 code=kill) dovecot: anvil: Warning: Killed with signal 15 (by pid=1 uid=0 code=kill) dovecot: log: Warning: Killed with signal 15 (by pid=1 uid=0 code=kill) postfix/master[2435]: daemon started -- version 2.8.5, configuration /etc/postfix postfix/master[2435]: terminating on signal 15 postfix/master[2965]: daemon started -- version 2.8.5, configuration /etc/postfix

  Read the article

• How do I troubleshoot a "Bad Request" in Apache2?

  - by Nick

  I have a PHP application that loads for all URLs except the home page. Visiting "https://my.site.com/" produces a "Bad Request" error message. Any other URL, for example, "https://my.site.com/SomePage/" works just fine. It's only the home page that does not work. All pages use mod_rewrite and get routed through a single dispatch script, Director.php. Accessing Director.php directly also produces the "Bad Request" error. BUT- ALL of the other requests go through Director, and they all work just fine, (excluding the home page), so it can't be an issue with the Director.php script? OR can it? I'm not seeing anything in the Apache2 error log, and I'm not seeing any PHP errors in the PHP Error log. I've tried changing the first line of Director.php to read: echo 'test'; exit(); But I still get a "Bad Request". This is the rewrite log for a request to the home page: 123.123.123.123 - - [18/Feb/2011:05:38:49 +0000] [my.site.com/sid#7f273d77cb80][rid#7f273da48b28/initial] (2) init rewrite engine with requested uri / 123.123.123.123 - - [18/Feb/2011:05:38:49 +0000] [my.site.com/sid#7f273d77cb80][rid#7f273da48b28/initial] (3) applying pattern '^/([a-zA-Z0-9\-\_]+)/$' to uri '/' 123.123.123.123 - - [18/Feb/2011:05:38:49 +0000] [my.site.com/sid#7f273d77cb80][rid#7f273da48b28/initial] (3) applying pattern '^/([a-zA-Z0-9\-\_]+)/([a-zA-Z0-9\-\_]+)/$' to uri '/' 123.123.123.123 - - [18/Feb/2011:05:38:49 +0000] [my.site.com/sid#7f273d77cb80][rid#7f273da48b28/initial] (1) pass through / 123.123.123.123 - - [18/Feb/2011:05:38:49 +0000] [my.site.com/sid#7f273d77cb80][rid#7f273da5a298/subreq] (2) init rewrite engine with requested uri /Director.php 123.123.123.123 - - [18/Feb/2011:05:38:49 +0000] [my.site.com/sid#7f273d77cb80][rid#7f273da5a298/subreq] (2) rewrite '/Director.php' - '-[L,NC]' 123.123.123.123 - - [18/Feb/2011:05:38:49 +0000] [my.site.com/sid#7f273d77cb80][rid#7f273da5a298/subreq] (3) applying pattern '^/([a-zA-Z0-9\-\_]+)/$' to uri '-[L,NC]' 123.123.123.123 - - [18/Feb/2011:05:38:49 +0000] [my.site.com/sid#7f273d77cb80][rid#7f273da5a298/subreq] (3) applying pattern '^/([a-zA-Z0-9\-\_]+)/([a-zA-Z0-9\-\_]+)/$' to uri '-[L,NC]' 123.123.123.123 - - [18/Feb/2011:05:38:49 +0000] [my.site.com/sid#7f273d77cb80][rid#7f273da5a298/subreq] (2) local path result: -[L,NC] Apache2 Access Log my.site.com:443 123.123.123.123 - - [18/Feb/2011:05:44:19 +0000] "GET / HTTP/1.1" 400 3223 "-" "Mozilla/5.0 (X11; U; Linux x86_64; en-US; rv:1.9.2.8) Gecko/20100723 Ubuntu/10.04 (lucid) Firefox/3.6.8" Any ideas? I don't know what else to try? UPDATE: Here's my vhost conf: RewriteEngine On RewriteLog "/LiveWebs/mysite.com/rewrite.log" RewriteLogLevel 5 # Dont rewite Crons folder ReWriteRule ^/Crons/ - [L,NC] ReWriteRule ^/phpmyadmin - [L,NC] ReWriteRule .php$ -[L,NC] # this is the problem!! RewriteCond %{REQUEST_URI} !^/images/ [NC] RewriteRule ^/([a-zA-Z0-9\-\_]+)/$ /Director.php?rt=$1 [L,QSA] RewriteCond %{REQUEST_URI} !^/images/ [NC] RewriteRule ^/([a-zA-Z0-9\-\_]+)/([a-zA-Z0-9\-\_]+)/$ /Director.php?rt=$1&action=$2 [L,QSA] The problem is the line "ReWriteRule .php$ -[L,NC]". When I comment it out, the home page loads. The question is, how do I make URLS that actually end in .php go straight through (without breaking the home page)?

  Read the article

• Can't launch glassfish on ec2 - can't open port

  - by orange80

  I'm trying to start glassfish on an EBS-based AMI of Ubuntu 10.04 64-bit. I have used glassfish on non-ec2 servers with no problems, but on ec2 I get this message: $ sudo -u glassfish bin/asadmin start-domain domain1 There is a process already using the admin port 4848 -- it probably is another instance of a GlassFish server. Command start-domain failed. I know that ec2 has requires that firewall rules be modified using ec2-authorize to let outside traffic thru the firewall, as I had to do to make ssh work. This still doesn't explain the port error when all I'm trying to do is start glassfish so I can try $ wget localhost:8080and make sure it's working. This is very frustrating and I'd really appreciate any help. Thanks. FINAL UPDATE: Sorry if you came here looking for answers. I never figured out what was causing the problem. I created another fresh instance, installed the same stuff, and Glassfish worked perfectly. Something obviously got boned during installation, but I have no idea what. I guess it will remain a mystery. UPDATE: Here's what I get from netstat: # netstat -nuptl Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State PID/Program name tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 462/sshd tcp6 0 0 :::22 :::* LISTEN 462/sshd udp 0 0 0.0.0.0:5353 0.0.0.0:* 483/avahi-daemon: r udp 0 0 0.0.0.0:1194 0.0.0.0:* 589/openvpn udp 0 0 0.0.0.0:37940 0.0.0.0:* 483/avahi-daemon: r udp 0 0 0.0.0.0:68 0.0.0.0:* 377/dhclient3 UPDATE: One more thing... I know that the "net.ipv6.bindv6only" kernel option can cause problems with java networking, so I did set this: # sysctl -w net.ipv6.bindv6only=0 UPDATE: I also verified that it has nothing at all to do with the port number (4848). As you can see here, when I changed the admin-listener port in domain.xml to 4949, I get a similar message: # sudo -u glassfish bin/asadmin start-domain domain1 There is a process already using the admin port 4949 -- it probably is another instance of a GlassFish server. Command start-domain failed. UPDATE: Here are the contents of /etc/hosts: 127.0.0.1 localhost # The following lines are desirable for IPv6 capable hosts ::1 ip6-localhost ip6-loopback fe00::0 ip6-localnet ff00::0 ip6-mcastprefix ff02::1 ip6-allnodes ff02::2 ip6-allrouters ff02::3 ip6-allhosts I should mention that I have another Ubuntu Lucid 10.04 64-bit slice that is NOT hosted on ec2, and set it up the exact same way with no problems whatsoever. Also server.log doesn't offer much insight either: # cat ./server.log Nov 20, 2010 8:46:49 AM com.sun.enterprise.admin.launcher.GFLauncherLogger info INFO: JVM invocation command line: /usr/lib/jvm/java-6-sun-1.6.0.22/bin/java -cp /opt/glassfishv3/glassfish/modules/glassfish.jar -XX:+UnlockDiagnosticVMOptions -XX:MaxPermSize=192m -XX:NewRatio=2 -XX:+LogVMOutput -XX:LogFile=/opt/glassfishv3/glassfish/domains/domain1/logs/jvm.log -Xmx512m -client -javaagent:/opt/glassfishv3/glassfish/lib/monitor/btrace-agent.jar=unsafe=true,noServer=true -Dosgi.shell.telnet.maxconn=1 -Djdbc.drivers=org.apache.derby.jdbc.ClientDriver -Dfelix.fileinstall.dir=/opt/glassfishv3/glassfish/modules/autostart/ -Djavax.net.ssl.keyStore=/opt/glassfishv3/glassfish/domains/domain1/config/keystore.jks -Dosgi.shell.telnet.port=6666 -Djava.security.policy=/opt/glassfishv3/glassfish/domains/domain1/config/server.policy -Dfelix.fileinstall.poll=5000 -Dcom.sun.aas.instanceRoot=/opt/glassfishv3/glassfish/domains/domain1 -Dcom.sun.enterprise.config.config_environment_factory_class=com.sun.enterprise.config.serverbeans.AppserverConfigEnvironmentFactory -Dosgi.shell.telnet.ip=127.0.0.1 -Djava.endorsed.dirs=/opt/glassfishv3/glassfish/modules/endorsed:/opt/glassfishv3/glassfish/lib/endorsed -Dcom.sun.aas.installRoot=/opt/glassfishv3/glassfish -Djava.ext.dirs=/usr/lib/jvm/java-6-sun-1.6.0.22/lib/ext:/usr/lib/jvm/java-6-sun-1.6.0.22/jre/lib/ext:/opt/glassfishv3/glassfish/domains/domain1/lib/ext -Dfelix.fileinstall.bundles.new.start=true -Djavax.net.ssl.trustStore=/opt/glassfishv3/glassfish/domains/domain1/config/cacerts.jks -Dcom.sun.enterprise.security.httpsOutboundKeyAlias=s1as -Djava.security.auth.login.config=/opt/glassfishv3/glassfish/domains/domain1/config/login.conf -DANTLR_USE_DIRECT_CLASS_LOADING=true -Dfelix.fileinstall.debug=1 -Dorg.glassfish.web.rfc2109_cookie_names_enforced=false -Djava.library.path=/opt/glassfishv3/glassfish/lib:/usr/lib/jvm/java-6-sun-1.6.0.22/jre/lib/amd64/server:/usr/lib/jvm/java-6-sun-1.6.0.22/jre/lib/amd64:/usr/lib/jvm/java-6-sun-1.6.0.22/lib/amd64:/usr/java/packages/lib/amd64:/usr/lib64:/lib64:/lib:/usr/lib com.sun.enterprise.glassfish.bootstrap.ASMain -domainname domain1 -asadmin-args start-domain,,,domain1 -instancename server -verbose false -debug false -asadmin-classpath /opt/glassfishv3/glassfish/modules/admin-cli.jar -asadmin-classname com.sun.enterprise.admin.cli.AsadminMain -upgrade false -domaindir /opt/glassfishv3/glassfish/domains/domain1 -read-stdin true

  Read the article

• Tuning performance of Ubuntu 10.04 on Compaq Evo W4000.

  - by Fantomas

  Hi, I got this computer free and installed Ubuntu 10.04 on it + updates, plus followed the following tutorial all the way: http://www.unixmen.com/linux-tutorials/937-things-to-do-after-installing-ubuntu-1004-lts-lucid-lynx I love the Docky which comes with it, but the computer has been running rather slowly. The System: kernel 2.6.32-22-generic Gnome 2.30.0 (I like Gnome!) Memory: 1GB Processor: Intel (R) Pentium (R) 4 CPU 1700 MHz (needless to say, it is 32 bit). I think I dedicated 128 Mb to video memory while installing, but cannot find this setting now. I did also install an NVidia driver for the 3D card, so I probably want to reclaim that memory back. I want to trim the fat but I also want to keep some of the sex appeal of Ubuntu 10.04. I will gift this computer to a friend, who will use it for Internet, music, videos, word processing, Skype and instant messaging - he is non-technical, so this hardware and Linux should work for him; I just need to speed it up while keeping the good software and having a nice UI. I sort of know my way around Linux, but not that well. Feel free to ask me to run particular commands if you want more info. For starters, here are the services below. Which ones can I kill and how? What else can go? There is no need to run ssh or ftp or http or ntp servers. As I said before, this computer is for non-technical person. There is also absolutely no bluetooth or wireless networking needed - it will feed off a regular ethernet cable. What I do not want to do is reinstall some other distro or recompile a kernel. I want to make it 80% perfect spending 20% of the energy :) Thanks! $ service --status-all [ ? ] acpi-support [ ? ] acpid [ ? ] alsa-mixer-save [ ? ] anacron [ - ] apparmor [ ? ] apport [ ? ] atd [ ? ] avahi-daemon [ ? ] binfmt-support [ - ] bluetooth [ - ] bootlogd [ - ] brltty [ ? ] console-setup [ ? ] cron [ + ] cups [ ? ] dbus [ ? ] dmesg [ ? ] dns-clean [ ? ] failsafe-x [ - ] fancontrol [ ? ] gdm [ - ] grub-common [ ? ] hostname [ ? ] hwclock [ ? ] hwclock-save [ ? ] irqbalance [ - ] kerneloops [ ? ] killprocs [ - ] lm-sensors [ ? ] module-init-tools [ ? ] network-interface [ ? ] network-interface-security [ ? ] network-manager [ ? ] networking [ ? ] ondemand [ ? ] pcmciautils [ ? ] plymouth [ ? ] plymouth-log [ ? ] plymouth-splash [ ? ] plymouth-stop [ ? ] pppd-dns [ ? ] procps [ + ] pulseaudio [ ? ] rc.local [ - ] rsync [ ? ] rsyslog [ - ] saned [ ? ] screen-cleanup [ ? ] sendsigs [ ? ] speech-dispatcher [ ? ] stop-bootlogd [ ? ] stop-bootlogd-single [ ? ] udev [ ? ] udev-finish [ ? ] udevmonitor [ ? ] udevtrigger [ ? ] ufw [ ? ] umountfs [ ? ] umountnfs.sh [ ? ] umountroot [ ? ] unattended-upgrades [ - ] urandom [ + ] winbind [ ? ] wpa-ifupdown [ - ] x11-common

  Read the article

• linux raid 1: right after replacing and syncing one drive, the other disk fails - understanding what is going on with mdstat/mdadm

  - by devicerandom

  We have an old RAID 1 Linux server (Ubuntu Lucid 10.04), with four partitions. A few days ago /dev/sdb failed, and today we noticed /dev/sda had pre-failure ominous SMART signs (~4000 reallocated sector count). We replaced /dev/sdb this morning and rebuilt the RAID on the new drive, following this guide: http://www.howtoforge.com/replacing_hard_disks_in_a_raid1_array Everything went smooth until the very end. When it looked like it was finishing to synchronize the last partition, the other old one failed. At this point I am very unsure of the state of the system. Everything seems working and the files seem to be all accessible, just as if it synchronized everything, but I'm new to RAID and I'm worried about what is going on. The /proc/mdstat output is: Personalities : [raid1] [linear] [multipath] [raid0] [raid6] [raid5] [raid4] [raid10] md3 : active raid1 sdb4[2](S) sda4[0] 478713792 blocks [2/1] [U_] md2 : active raid1 sdb3[1] sda3[2](F) 244140992 blocks [2/1] [_U] md1 : active raid1 sdb2[1] sda2[2](F) 244140992 blocks [2/1] [_U] md0 : active raid1 sdb1[1] sda1[2](F) 9764800 blocks [2/1] [_U] unused devices: <none> The order of [_U] vs [U_]. Why aren't they consistent along all the array? Is the first U /dev/sda or /dev/sdb? (I tried looking on the web for this trivial information but I found no explicit indication) If I read correctly for md0, [_U] should be /dev/sda1 (down) and /dev/sdb1 (up). But if /dev/sda has failed, how can it be the opposite for md3 ? I understand /dev/sdb4 is now spare because probably it failed to synchronize it 100%, but why does it show /dev/sda4 as up? Shouldn't it be [__]? Or [_U] anyway? The /dev/sda drive now cannot even be accessed by SMART anymore apparently, so I wouldn't expect it to be up. What is wrong with my interpretation of the output? I attach also the outputs of mdadm --detail for the four partitions: /dev/md0: Version : 00.90 Creation Time : Fri Jan 21 18:43:07 2011 Raid Level : raid1 Array Size : 9764800 (9.31 GiB 10.00 GB) Used Dev Size : 9764800 (9.31 GiB 10.00 GB) Raid Devices : 2 Total Devices : 2 Preferred Minor : 0 Persistence : Superblock is persistent Update Time : Tue Nov 5 17:27:33 2013 State : clean, degraded Active Devices : 1 Working Devices : 1 Failed Devices : 1 Spare Devices : 0 UUID : a3b4dbbd:859bf7f2:bde36644:fcef85e2 Events : 0.7704 Number Major Minor RaidDevice State 0 0 0 0 removed 1 8 17 1 active sync /dev/sdb1 2 8 1 - faulty spare /dev/sda1 /dev/md1: Version : 00.90 Creation Time : Fri Jan 21 18:43:15 2011 Raid Level : raid1 Array Size : 244140992 (232.83 GiB 250.00 GB) Used Dev Size : 244140992 (232.83 GiB 250.00 GB) Raid Devices : 2 Total Devices : 2 Preferred Minor : 1 Persistence : Superblock is persistent Update Time : Tue Nov 5 17:39:06 2013 State : clean, degraded Active Devices : 1 Working Devices : 1 Failed Devices : 1 Spare Devices : 0 UUID : 8bcd5765:90dc93d5:cc70849c:224ced45 Events : 0.1508280 Number Major Minor RaidDevice State 0 0 0 0 removed 1 8 18 1 active sync /dev/sdb2 2 8 2 - faulty spare /dev/sda2 /dev/md2: Version : 00.90 Creation Time : Fri Jan 21 18:43:19 2011 Raid Level : raid1 Array Size : 244140992 (232.83 GiB 250.00 GB) Used Dev Size : 244140992 (232.83 GiB 250.00 GB) Raid Devices : 2 Total Devices : 2 Preferred Minor : 2 Persistence : Superblock is persistent Update Time : Tue Nov 5 17:46:44 2013 State : clean, degraded Active Devices : 1 Working Devices : 1 Failed Devices : 1 Spare Devices : 0 UUID : 2885668b:881cafed:b8275ae8:16bc7171 Events : 0.2289636 Number Major Minor RaidDevice State 0 0 0 0 removed 1 8 19 1 active sync /dev/sdb3 2 8 3 - faulty spare /dev/sda3 /dev/md3: Version : 00.90 Creation Time : Fri Jan 21 18:43:22 2011 Raid Level : raid1 Array Size : 478713792 (456.54 GiB 490.20 GB) Used Dev Size : 478713792 (456.54 GiB 490.20 GB) Raid Devices : 2 Total Devices : 2 Preferred Minor : 3 Persistence : Superblock is persistent Update Time : Tue Nov 5 17:19:20 2013 State : clean, degraded Active Devices : 1 Working Devices : 2 Failed Devices : 0 Spare Devices : 1 Number Major Minor RaidDevice State 0 8 4 0 active sync /dev/sda4 1 0 0 1 removed 2 8 20 - spare /dev/sdb4 The active sync on /dev/sda4 baffles me. I am worried because if tomorrow morning I have to replace /dev/sda, I want to be sure what should I sync with what and what is going on. I am also quite baffled by the fact /dev/sda decided to fail exactly when the raid finished resyncing. I'd like to understand what is really happening. Thanks a lot for your patience and help. Massimo

  Read the article

• NVIDIA x server - "sudo nvidia config" does not generate a working 'xorg.config'

  - by Mike

  I am over 18 hours deep on this challenge. I got to this point and am stuck. very stuck. Maybe you can figure it out? Ubuntu Version 12.04 LTS with all the updates installed. Problem: The default settings in "etc/X11/xorg.conf" that are generated by the "nvidia-xconfig" tool, do not allow the NVIDIA x server to connect to the driver in my "System Settings Additional Driver window". (that's how I understand it. Lots of information below). Symptoms of Problem "System Settings Additional Driver" window has drivers, but the nvidia x server cannot connect/utilize any of the 4 drivers. the drivers are activated, but not in use. When I go to "System Tools Administration NVIDIA x server settings" I get an error that basically tells me to create a default file to initialize the NVIDIA X server (screen shot below). This is the messages the terminal gives after running a "sudo nvidia-xconfig" command for the first time. It seems that the generated file by the tool i just ran is generating a bad/unusable file: If I run the "sudo nvidia-xconfig" command again, I wont get an error the second time. However when I reboot, the default file that is generated (etc/X11/xorg.conf) simply puts the screen resolution at 800 x 600 (or something big like that). When I try to go to NVIDIA x server settings I am greeted with the same screen as the screen shot as in symptom 2 (no option to change the resolution). If I try to go to "system settings display" there are no other resolutions to choose from. At this point I must delete the newly minted "xorg.conf" and reinstate the original in its place. Here are the contents of the "xorg.conf" that is generated first (the one missing required information): # nvidia-xconfig: X configuration file generated by nvidia-xconfig # nvidia-xconfig: version 304.88 (buildmeister@swio-display-x86-rhel47-06) Wed Mar 27 15:32:58 PDT 2013 Section "ServerLayout" Identifier "Layout0" Screen 0 "Screen0" InputDevice "Keyboard0" "CoreKeyboard" InputDevice "Mouse0" "CorePointer" EndSection Section "Files" EndSection Section "InputDevice" # generated from default Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/psaux" Option "Emulate3Buttons" "no" Option "ZAxisMapping" "4 5" EndSection Section "InputDevice" # generated from default Identifier "Keyboard0" Driver "kbd" EndSection Section "Monitor" Identifier "Monitor0" VendorName "Unknown" ModelName "Unknown" HorizSync 28.0 - 33.0 VertRefresh 43.0 - 72.0 Option "DPMS" EndSection Section "Device" Identifier "Device0" Driver "nvidia" VendorName "NVIDIA Corporation" EndSection Section "Screen" Identifier "Screen0" Device "Device0" Monitor "Monitor0" DefaultDepth 24 SubSection "Display" Depth 24 EndSubSection EndSection Hardware: I ran the "lspci|grep VGA". There results are: 00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09) 01:00.0 VGA compatible controller: NVIDIA Corporation GF108 [Quadro 1000M] (rev a1) More Hardware info: Ram: 16GB CPU: Intel Core i7-2720QM @2.2GHz * 8 Other: 64 bit. This is a triple boot computer and not a VM. Attempts With Not Success on My End: 1) Tried to append the "xorg.conf" with what I perceive is missing information and obviously it didn't fly. 2) All the other stuff I tried got me to this point. 3) See if this link is helpful to you (I barely get it, but i get enough knowing that a smarter person might find this useful): http://manpages.ubuntu.com/manpages/lucid/man1/nvidia-xconfig.1.html 4) I am completely new to Linux (40 hours over past week), but not to programming. However I am very serious about changing over to Linux. When you respond (I hope someone responds...) please respond in a way that a person new to Linux can understand. 5) By the way, the reason I am in this mess is because I MUST have a second monitor running from my laptop, and "System Settings Display" doesn't recognize my second display. I know it is possible to make the second display work in my system, because when I boot from the install CD, I perform work on the native laptop monitor, but the second monitor shows a purple screen with Ubuntu in the middle, so I know the VGA port is sending a signal out. If this is too much for you to tackle please suggest an alternative method to get a second display. I don't want to go to windows but I cannot have a single display. I am really fudged here. I hope some smart person can help. Thanks in advance. Mike. **********************EDIT #1********************** More Details About Graphics Card I was asked "which brand of nvidia-card do you have exactly?" Here is what I did to provide more info (maybe relevant, maybe not, but here is everything): 1) Took my Lenovo W520 right apart to see if there is an identifier on the actual card. However I realized that if I get deep enough to take a look, the laptop "won't like it". so I put it back together. Figuring out the card this way is not an option for me right now. 2) (My computer is triple boot) I logged into Win7 and ran 'dxdiag' command. here is the screen shot: 3) I tried to look on the lenovo website for more details... but no luck. I took a look at my receipts and here is info form receipt: System Unit: W520 NVIDIA Quadro 1000M 2GB 4) In win7 I went to the NVIDIA website and used the option to have my card 'scanned' by a Java applet to determine the latest update for my card. I tried the same with Ubuntu but I can't get the applet to run. Here is the recommended driver from from the NVIDIA Applet for my card for Win7 (I hope this shines some light on the specifics of the card): Quadro/NVS/Tesla/GRID Desktop Driver Release R319 Version: 320.00 WHQL Release Date: 3.5.2013 5) Also I went on the NVIDIA driver search and looked through every possible combination of product type + product series + product to find all the combinations that yield a 1000M card. My card is: Product Type: Quadro Product Series: Quadro Series (Notebooks) Product: 1000M ***********************EDIT #2******************* Additional Symptoms Another question that generated more symptoms I previously didn't mention was: "After generating xorg.conf by nvidia-xconfig, go to additional drivers, do you see nvidia-304?" 1) I took a screen shot of the "additional drivers" right after generating xorg.conf by nvidia-xconfig. Here it is: 2) Then I did a reboot. Now Ubuntu is 600 x 800 resolution. When I logged in after the computer came up I got an error (which I always get after generating xorg.conf by nvidia-xconfig and rebooting) 3) To finally answer the question - No. There is no "NVIDIA-304" driver. Screen shot of additional drivers after generating xorg.conf by nvidia-xconfig and rebooting : At this point I revert to the original xorg.conf and delete the xorg.conf generated by Nvidia.

  Read the article

• SQL SERVER – Windows File/Folder and Share Permissions – Notes from the Field #029

  - by Pinal Dave

  [Note from Pinal]: This is a 29th episode of Notes from the Field series. Security is the task which we should give it to the experts. If there is a small overlook or misstep, there are good chances that security of the organization is compromised. This is very true, but there are always devils’s advocates who believe everyone should know the security. As a DBA and Administrator, I often see people not taking interest in the Windows Security hiding behind the reason of not expert of Windows Server. We all often miss the important mission statement for the success of any organization – Teamwork. In this blog post Brian tells the story in very interesting lucid language. Read On! In this episode of the Notes from the Field series database expert Brian Kelley explains a very crucial issue DBAs and Developer faces on their production server. Linchpin People are database coaches and wellness experts for a data driven world. Read the experience of Brian in his own words. When I talk security among database professionals, I find that most have at least a working knowledge of how to apply security within a database. When I talk with DBAs in particular, I find that most have at least a working knowledge of security at the server level if we’re speaking of SQL Server. One area I see continually that is weak is in the area of Windows file/folder (NTFS) and share permissions. The typical response is, “I’m a database developer and the Windows system administrator is responsible for that.” That may very well be true – the system administrator may have the primary responsibility and accountability for file/folder and share security for the server. However, if you’re involved in the typical activities surrounding databases and moving data around, you should know these permissions, too. Otherwise, you could be setting yourself up where someone is able to get to data he or she shouldn’t, or you could be opening the door where human error puts bad data in your production system. File/Folder Permission Basics: I wrote about file/folder permissions a few years ago to give the basic permissions that are most often seen. Here’s what you must know as a minimum at the file/folder level: Read - Allows you to read the contents of the file or folder. Having read permissions allows you to copy the file or folder. Write  – Again, as the name implies, it allows you to write to the file or folder. This doesn’t include the ability to delete, however, nothing stops a person with this access from writing an empty file. Delete - Allows the file/folder to be deleted. If you overwrite files, you may need this permission. Modify - Allows read, write, and delete. Full Control - Same as modify + the ability to assign permissions. File/Folder permissions aggregate, unless there is a DENY (where it trumps, just like within SQL Server), meaning if a person is in one group that gives Read and antoher group that gives Write, that person has both Read and Write permissions. As you might expect me to say, always apply the Principle of Least Privilege. This likely means that any additional permission you might add does not need Full Control. Share Permission Basics: At the share level, here are the permissions. Read - Allows you to read the contents on the share. Change - Allows you to read, write, and delete contents on the share. Full control - Change + the ability to modify permissions. Like with file/folder permissions, these permissions aggregate, and DENY trumps. So What Access Does a Person / Process Have? Figuring out what someone or some process has depends on how the location is being accessed: Access comes through the share (\\ServerName\Share) – a combination of permissions is considered. Access is through a drive letter (C:\, E:\, S:\, etc.) – only the file/folder permissions are considered. The only complicated one here is access through the share. Here’s what Windows does: Figures out what the aggregated permissions are at the file/folder level. Figures out what the aggregated permissions are at the share level. Takes the most restrictive of the two sets of permissions. You can test this by granting Full Control over a folder (this is likely already in place for the Users local group) and then setting up a share. Give only Read access through the share, and that includes to Administrators (if you’re creating a share, likely you have membership in the Administrators group). Try to read a file through the share. Now try to modify it. The most restrictive permission is the Share level permissions. It’s set to only allow Read. Therefore, if you come through the share, it’s the most restrictive. Does This Knowledge Really Help Me? In my experience, it does. I’ve seen cases where sensitive files were accessible by every authenticated user through a share. Auditors, as you might expect, have a real problem with that. I’ve also seen cases where files to be imported as part of the nightly processing were overwritten by files intended from development. And I’ve seen cases where a process can’t get to the files it needs for a process because someone changed the permissions. If you know file/folder and share permissions, you can spot and correct these types of security flaws. Given that there are a lot of database professionals that don’t understand these permissions, if you know it, you set yourself apart. And if you’re able to help on critical processes, you begin to set yourself up as a linchpin (link to .pdf) for your organization. If you want to get started with performance tuning and database security with the help of experts, read more over at Fix Your SQL Server. Reference: Pinal Dave (http://blog.sqlauthority.com)Filed under: Notes from the Field, PostADay, SQL, SQL Authority, SQL Query, SQL Security, SQL Server, SQL Tips and Tricks, T SQL

  Read the article

• SQL SERVER – Weekly Series – Memory Lane – #039

  - by Pinal Dave

  Here is the list of selected articles of SQLAuthority.com across all these years. Instead of just listing all the articles I have selected a few of my most favorite articles and have listed them here with additional notes below it. Let me know which one of the following is your favorite article from memory lane. 2007 FQL – Facebook Query Language Facebook list following advantages of FQL: Condensed XML reduces bandwidth and parsing costs. More complex requests can reduce the number of requests necessary. Provides a single consistent, unified interface for all of your data. It’s fun! UDF – Get the Day of the Week Function The day of the week can be retrieved in SQL Server by using the DatePart function. The value returned by the function is between 1 (Sunday) and 7 (Saturday). To convert this to a string representing the day of the week, use a CASE statement. UDF – Function to Get Previous And Next Work Day – Exclude Saturday and Sunday While reading ColdFusion blog of Ben Nadel Getting the Previous Day In ColdFusion, Excluding Saturday And Sunday, I realize that I use similar function on my SQL Server Database. This function excludes the Weekends (Saturday and Sunday), and it gets previous as well as next work day. Complete Series of SQL Server Interview Questions and Answers Data Warehousing Interview Questions and Answers – Introduction Data Warehousing Interview Questions and Answers – Part 1 Data Warehousing Interview Questions and Answers – Part 2 Data Warehousing Interview Questions and Answers – Part 3 Data Warehousing Interview Questions and Answers Complete List Download 2008 Introduction to Log Viewer In SQL Server all the windows event logs can be seen along with SQL Server logs. Interface for all the logs is same and can be launched from the same place. This log can be exported and filtered as well. DBCC SHRINKFILE Takes Long Time to Run If you are DBA who are involved with Database Maintenance and file group maintenance, you must have experience that many times DBCC SHRINKFILE operations takes a long time but any other operations with Database are relatively quicker. mssqlsystemresource – Resource Database The purpose of resource database is to facilitates upgrading to the new version of SQL Server without any hassle. In previous versions whenever version of SQL Server was upgraded all the previous version system objects needs to be dropped and new version system objects to be created. 2009 Puzzle – Write Script to Generate Primary Key and Foreign Key In SQL Server Management Studio (SSMS), there is no option to script all the keys. If one is required to script keys they will have to manually script each key one at a time. If database has many tables, generating one key at a time can be a very intricate task. I want to throw a question to all of you if any of you have scripts for the same purpose. Maximizing View of SQL Server Management Studio – Full Screen – New Screen I had explained the following two different methods: 1) Open Results in Separate Tab - This is a very interesting method as result pan shows up in a different tab instead of the splitting screen horizontally. 2) Open SSMS in Full Screen - This works always and to its best. Not many people are aware of this method; hence, very few people use it to enhance performance. 2010 Find Queries using Parallelism from Cached Plan T-SQL script gets all the queries and their execution plan where parallelism operations are kicked up. Pay attention there is TOP 10 is used, if you have lots of transactional operations, I suggest that you change TOP 10 to TOP 50 This is the list of the all the articles in the series of computed columns. SQL SERVER – Computed Column – PERSISTED and Storage This article talks about how computed columns are created and why they take more storage space than before. SQL SERVER – Computed Column – PERSISTED and Performance This article talks about how PERSISTED columns give better performance than non-persisted columns. SQL SERVER – Computed Column – PERSISTED and Performance – Part 2 This article talks about how non-persisted columns give better performance than PERSISTED columns. SQL SERVER – Computed Column and Performance – Part 3 This article talks about how Index improves the performance of Computed Columns. SQL SERVER – Computed Column – PERSISTED and Storage – Part 2 This article talks about how creating index on computed column does not grow the row length of table. SQL SERVER – Computed Columns – Index and Performance This article summarized all the articles related to computed columns. 2011 SQL SERVER – Interview Questions and Answers – Frequently Asked Questions – Data Warehousing Concepts – Day 21 of 31 What is Data Warehousing? What is Business Intelligence (BI)? What is a Dimension Table? What is Dimensional Modeling? What is a Fact Table? What are the Fundamental Stages of Data Warehousing? What are the Different Methods of Loading Dimension tables? Describes the Foreign Key Columns in Fact Table and Dimension Table? What is Data Mining? What is the Difference between a View and a Materialized View? SQL SERVER – Interview Questions and Answers – Frequently Asked Questions – Data Warehousing Concepts – Day 22 of 31 What is OLTP? What is OLAP? What is the Difference between OLTP and OLAP? What is ODS? What is ER Diagram? SQL SERVER – Interview Questions and Answers – Frequently Asked Questions – Data Warehousing Concepts – Day 23 of 31 What is ETL? What is VLDB? Is OLTP Database is Design Optimal for Data Warehouse? If denormalizing improves Data Warehouse Processes, then why is the Fact Table is in the Normal Form? What are Lookup Tables? What are Aggregate Tables? What is Real-Time Data-Warehousing? What are Conformed Dimensions? What is a Conformed Fact? How do you Load the Time Dimension? What is a Level of Granularity of a Fact Table? What are Non-Additive Facts? What is a Factless Facts Table? What are Slowly Changing Dimensions (SCD)? SQL SERVER – Interview Questions and Answers – Frequently Asked Questions – Data Warehousing Concepts – Day 24 of 31 What is Hybrid Slowly Changing Dimension? What is BUS Schema? What is a Star Schema? What Snow Flake Schema? Differences between the Star and Snowflake Schema? What is Difference between ER Modeling and Dimensional Modeling? What is Degenerate Dimension Table? Why is Data Modeling Important? What is a Surrogate Key? What is Junk Dimension? What is a Data Mart? What is the Difference between OLAP and Data Warehouse? What is a Cube and Linked Cube with Reference to Data Warehouse? What is Snapshot with Reference to Data Warehouse? What is Active Data Warehousing? What is the Difference between Data Warehousing and Business Intelligence? What is MDS? Explain the Paradigm of Bill Inmon and Ralph Kimball. SQL SERVER – Azure Interview Questions and Answers – Guest Post by Paras Doshi – Day 25 of 31 Paras Doshi has submitted 21 interesting question and answers for SQL Azure. 1.What is SQL Azure? 2.What is cloud computing? 3.How is SQL Azure different than SQL server? 4.How many replicas are maintained for each SQL Azure database? 5.How can we migrate from SQL server to SQL Azure? 6.Which tools are available to manage SQL Azure databases and servers? 7.Tell me something about security and SQL Azure. 8.What is SQL Azure Firewall? 9.What is the difference between web edition and business edition? 10.How do we synchronize On Premise SQL server with SQL Azure? 11.How do we Backup SQL Azure Data? 12.What is the current pricing model of SQL Azure? 13.What is the current limitation of the size of SQL Azure DB? 14.How do you handle datasets larger than 50 GB? 15.What happens when the SQL Azure database reaches Max Size? 16.How many databases can we create in a single server? 17.How many servers can we create in a single subscription? 18.How do you improve the performance of a SQL Azure Database? 19.What is code near application topology? 20.What were the latest updates to SQL Azure service? 21.When does a workload on SQL Azure get throttled? SQL SERVER – Interview Questions and Answers – Guest Post by Malathi Mahadevan – Day 26 of 31 Malachi had asked a simple question which has several answers. Each answer makes you think and ponder about the reality of the IT world. Look at the simple question – ‘What is the toughest challenge you have faced in your present job and how did you handle it’? and its various answers. Each answer has its own story. SQL SERVER – Interview Questions and Answers – Guest Post by Rick Morelan – Day 27 of 31 Rick Morelan of Joes2Pros has written an excellent blog post on the subject how to find top N values. Most people are fully aware of how the TOP keyword works with a SELECT statement. After years preparing so many students to pass the SQL Certification I noticed they were pretty well prepared for job interviews too. Yes, they would do well in the interview but not great. There seemed to be a few questions that would come up repeatedly for almost everyone. Rick addresses similar questions in his lucid writing skills. 2012 Observation of Top with Index and Order of Resultset SQL Server has lots of things to learn and share. It is amazing to see how people evaluate and understand different techniques and styles differently when implementing. The real reason may be absolutely different but we may blame something totally different for the incorrect results. Read the blog post to learn more. How do I Record Video and Webcast How to Convert Hex to Decimal or INT Earlier I asked regarding a question about how to convert Hex to Decimal. I promised that I will post an answer with Due Credit to the author but never got around to post a blog post around it. Read the original post over here SQL SERVER – Question – How to Convert Hex to Decimal. Query to Get Unique Distinct Data Based on Condition – Eliminate Duplicate Data from Resultset The natural reaction will be to suggest DISTINCT or GROUP BY. However, not all the questions can be solved by DISTINCT or GROUP BY. Let us see the following example, where a user wanted only latest records to be displayed. Let us see the example to understand further. Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: Memory Lane, PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, T SQL, Technology

  Read the article

• CodePlex Daily Summary for Friday, October 26, 2012

  CodePlex Daily Summary for Friday, October 26, 2012Popular ReleasesPowerShell Community Extensions: 2.1 Production: PowerShell Community Extensions 2.1 Release NotesOct 25, 2012 This version of PSCX supports both Windows PowerShell 2.0 and 3.0. See the ReleaseNotes.txt download above for more information.Building Windows 8 Apps with C# and XAML: Full Source Chapters 1 - 10 for Windows 8 Fix 001: This is the full source from all chapters of the book, compiled and tested on Windows 8 RTM. Includes a fix for the Netflix example from Chapter 6 that was missing a service reference.PdfReport: PdfReport 1.3: - Removed the limitation of defining non duplicate column names. See DuplicateColumns sample for more info. - Added horizontal stack panel mode. See CharacterMap sample for more info. - Added pdfStamper to onFillAcroForm of PdfTemplate. See QuestionsAcroForm sample for more info. Added 6 new samples (http://pdfreport.codeplex.com/SourceControl/BrowseLatest): - AccountingBalanceColumn - CharacterMap - CustomPriceNumber - DuplicateColumns - QuestionsAcroForm - QuestionsFormuComponents: uComponents v5.1.0: Continuing our mammoth 88341 release, we bring you v5.1 What's new in uComponents v5.1?New Data Types: SQL AutoComplete SQL DropDownList XPath AutoComplete New component: uMapper Umbraco compatibilityThis release is compatible with Umbraco 4.8.0 (and above). For previous versions, please use 90019 with Umbraco 4.5.2+ and 93259 with Umbraco 4.7.1+ (To reiterate: this release does not work with Umbraco 4.7.2 and earlier versions.) Legacy and retirementThere are a number of components t...Umbraco CMS: Umbraco 4.9.1: Umbraco 4.9.1 is a bugfix release to fix major issues in 4.9.0 BugfixesThe full list of fixes can be found in the issue tracker's filtered results. A summary: Split buttons work again, you can now also scroll easier when the list is too long for the screen Media and Content pickers have information of the full path of the picked item Fixed: Publish status may not be accurate on nodes with large doctypes Fixed: 2 media folders and recycle bins after upgrade to 4.9 The template/code ...AcDown????? - AcDown Downloader Framework: AcDown????? v4.2.2: ??●AcDown??????????、??、??、???????。????，????，?????????????????????????。???????????Acfun、????(Bilibili)、??、??、YouTube、??、???、??????、SF????、????????????。 ●??????AcPlay?????，??????、????????????????。 ● AcDown??????????????????，????????????????????????????。 ● AcDown???????C#??，????.NET Framework 2.0??。?????"Acfun?????"。 ????32??64? Windows XP/Vista/7/8 ???? 32??64? ???Linux ????(1)????????Windows XP???，????????.NET Framework 2.0???(x86)，?????"?????????"??? (2)???????????Linux???，????????Mono?? ??2...WPF About Box: WPF About Box 1.2.1.1: Using more established names.Rawr: Rawr 5.0.2: This is the Downloadable WPF version of Rawr!For web-based version see http://elitistjerks.com/rawr.php You can find the version notes at: http://rawr.codeplex.com/wikipage?title=VersionNotes Rawr Addon (NOT UPDATED YET FOR MOP)We now have a Rawr Official Addon for in-game exporting and importing of character data hosted on Curse. The Addon does not perform calculations like Rawr, it simply shows your exported Rawr data in wow tooltips and lets you export your character to Rawr (including ba...MCEBuddy 2.x: MCEBuddy 2.3.5: Changelog for 2.3.5 (32bit and 64bit) 1. Fixed a bug causing MCEBuddy to crash during or after installation on Windows XP 2. Bugfix for resource leak with UPnP which would lead to a failure after many days 3. Increased the UPnP discovery re-scan interval from 10 minutes to 30 minutes 4. Added support for specifying TVDB and IMDB id’s in the conversion task page (forcing the internet lookup for metadata)CRM 2011 Visual Ribbon Editor: Visual Ribbon Editor (1.3.1025.5): [NEW] Support for connecting to CRM Online via Office 365 (OSDP) [NEW] Current connection information and loaded ribbon name are displayed in the status bar [IMPROVED] Connect dialog minor improvements and error message descriptions [IMPROVED] Connecting to a CRM server will close currently loaded ribbon upon confirmation (if another ribbon was loaded previously) [FIX] Fixed bug in Open Ribbon dialog which would not allow to refresh entity list more than onceSite Backup Repackager: Solution: Adding Feature References Detected section so user can check feature references to include in the new package.Tombola XNA: TombolaXNA 0.1: First release alphaSplitOS: SplitOS v0.0.4a: SplitOS v0.0.4a TUI Basic windows commands such as 'echo', 'cls', ... Basic linux commands such as 'print', 'clear', ... GUI Taskbar Animated mouse Font Open SAL Open SplitOS Application Language Compiler ( very unstable! )Readable Passphrase Generator: KeePass Plugin 0.8.0: Changes: Interrogative phrases (questions) like why did the statesman burgle amidst lucid sunlamps Support transitive / intransitive verbs (whether a verb needs a subject or not). Change adverbs to be either before or after the verb, at random. Add an "equal" version of each strength, where each possibility is equally likely (for password purists). 3401 words in the default dictionary (~400 more than previous release) Fixed bugs when choosing verb tensesMicrosoft Ajax Minifier: Microsoft Ajax Minifier 4.72: Fix for Issue #18819 - bad optimization of return/assign operator.DNN Module Creator: 01.01.00: Updated templates for DNN7 ( ie. DAL2, Web Service API ). Numerous bug fixes and enhancements.WPF Application Framework (WAF): WPF Application Framework (WAF) 2.5.0.390: Version 2.5.0.390 (Release Candidate): This release contains the source code of the WPF Application Framework (WAF) and the sample applications. Requirements .NET Framework 4.0 (The package contains a solution file for Visual Studio 2010) The unit test projects require Visual Studio 2010 Professional Changelog Legend: [B] Breaking change; [O] Marked member as obsolete WAF: Fix recent file list remove issue. WAF: Minor code improvements. BookLibrary: Fix Blend design time support o...Fiskalizacija za developere: FiskalizacijaDev 1.1: Ovo je prva nadogradnja ovog projekta nakon inicijalnog predstavljanja - dodali smo nekoliko feature-a, bilo zato što smo sami primijetili da bi ih bilo dobro dodati, bilo na osnovu vaših sugestija - hvala svima koji su se ukljucili :) Ovo su stvari riješene u v1.1.: 1. Bilo bi dobro da se XML dokument koji se šalje u CIS može snimiti u datoteku (http://fiskalizacija.codeplex.com/workitem/612) 2. Podrška za COM DLL (VB6) (http://fiskalizacija.codeplex.com/workitem/613) 3. Podrška za DOS (unu...Liberty: v3.4.0.0 Release 20th October 2012: Change Log -Added -Halo 4 support (invincibility, ammo editing) -Reach A warning dialog now shows up when you first attempt to swap a weapon -Fixed -A few minor bugsClosedXML - The easy way to OpenXML: ClosedXML 0.68.1: ClosedXML now resolves formulas! Yes it finally happened. If you call cell.Value and it has a formula the library will try to evaluate the formula and give you the result. For example: var wb = new XLWorkbook(); var ws = wb.AddWorksheet("Sheet1"); ws.Cell("A1").SetValue(1).CellBelow().SetValue(1); ws.Cell("B1").SetValue(1).CellBelow().SetValue(1); ws.Cell("C1").FormulaA1 = "\"The total value is: \" & SUM(A1:B2)"; var...New Projects40FINGERS DotNetNuke Windows8 Pin: 40FINGERS Windows8 Pin is a DotNetNuke Module that will enable pinning of your website to the Windows 8 Start Screen.clowncar: a tool for sharing your utils folder and keeping it up to dateConnection Strings for .NET 2: Merupakan class yang berisi beberapa connection string khusus untuk aplikasi .NET, class ini menggunakan referensi dari http://connectionstrings.comCRM 2011 Web Resource Linker/Publisher: This tool is a visual studio 2012 add-in that allows developers to quickly link and publish web resources to dynamics crm 2011 while inside the VS 2012 IDE.Dice Roller: A simple simulator of a dice roller.EFTracing & Logging: Demonstrates using the “Entity Framework Tracing” ElFinder.Net Connector: .NET connector for elfinder file manager version 2.x. Project contain library and ASP.NET MVC sample. Excel and PowerPivot Refresh Service: A Windows Service for periodically refreshing the data in Excel files, along with any embedded PowerPivot cubes.finalwebsite: This is my final website project.Flickr Reranking ASP.NET MVC: ASP.NET MVC, .NET, Flickr APIglobulin: videojuegoHealthVault ASP.NET MVC Sample: This project provides an object model for building HealthVault-connected applications with ASP.NET MVCHuman resource management - WFA: This project made ​​solution that allows you to control, human resource management at the company.Is a comprehensive system of recruitment planning, tracking...jFluent: jFluent is a Fluent style, light-weight validation framework for client-side validation. It is a jQuery plugin which can be used in ASP .NET MVC.jvp8: jvp8 is a dual-licensed commercial/GPL native wrapper which allows Java applications to easily use the VP8 video codec.Korean Baseball for Windows Phone: Windows Phone? ?? ???? ?????????. ???, ???, ???? ?????.Meus Projetos: Projetos andamentoMobySharp: MobySharp is an implementation of the Mobypicture.com API written in C#MS-SQL Server Post Exploitation Samples: Sample source code files and precompiled library files that correspond to the MS-SQL Post-exploitation presentation "When Databases Attack", by Rob Beck.On the Fly: On the Fly is a utility that enables you to compile your TypeScript files on the fly. Compiling your .ts files is just a click away!OpenMVCRM: Open source CRM project built on ASP.NET MVCpFinance: This is the application to facilitate individuals in managing their finance.Posh for Jammer: Jammer is are some PowerShell Functions calling the Yammer API.Quick Encoding Utility: This is a quick desktop utility which would provide a sneak preview of base64 string encoding (both to and from)ResearchWM: This is a new projecttestddhg1025201201: ertesttom10252012git01: fdstesttom10252012git02: fdstesttom10252012tfs01: dsa dsaUniSync: blah blahUnits for .NET: Strongly typed physical quantities and unit conversion.Web Crop Image (Restored): Cem Sisman was the original author of WebCropImage. After he deleted the project from CodePlex, I brought it back... along with over 50 bug fixes.

  Read the article

• Ubuntu, No wireless networks found after correctly installed madwifi

  - by Peter

  Hi, I just installed madwifi on my MSI laptop with an Atheros AR5001 wifi card & Lucid. As far as I can see and according to System - Administration - Hardware drivers the install was successful and the card + driver is up and running. However, I don't see any wireless network (my windows PC can see about 5 wireless networks). I tried it with the network manager applet as well as with wicd. If I try to connect to "Hidden Wireless Network" via nm-applet, it will start to connect for a while but is unable too (although I supply it with the correct WEP settings & key) So, I'm unable to use my wireless network. What am i doing wrong? Some information about my system: iwconfig lo no wireless extensions. eth0 no wireless extensions. wifi0 no wireless extensions. ath0 IEEE 802.11g ESSID:"" Mode:Managed Frequency:2.437 GHz Access Point: Not-Associated Bit Rate:0 kb/s Tx-Power:17 dBm Sensitivity=1/1 Retry:off RTS thr:off Fragment thr:off Power Management:off Link Quality=0/70 Signal level=-96 dBm Noise level=-96 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:0 Invalid misc:0 Missed beacon:0 pan0 no wireless extensions. ifconfig ath0 Link encap:Ethernet HWaddr 00:15:af:cf:e2:ca inet6 addr: fe80::215:afff:fecf:e2ca/64 Scope:Link UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) eth0 Link encap:Ethernet HWaddr 00:21:85:4d:82:78 inet addr:192.168.2.101 Bcast:192.168.2.255 Mask:255.255.255.0 inet6 addr: fe80::221:85ff:fe4d:8278/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:3800 errors:0 dropped:0 overruns:0 frame:0 TX packets:2944 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:3940261 (3.9 MB) TX bytes:525218 (525.2 KB) Interrupt:27 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:12 errors:0 dropped:0 overruns:0 frame:0 TX packets:12 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:720 (720.0 B) TX bytes:720 (720.0 B) wifi0 Link encap:UNSPEC HWaddr 00-15-AF-CF-E2-CA-00-00-00-00-00-00-00-00-00-00 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:3497 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:280 RX bytes:0 (0.0 B) TX bytes:179947 (179.9 KB) Interrupt:16 lshw -C network *-network description: Wireless interface product: AR5001 Wireless Network Adapter vendor: Atheros Communications Inc. physical id: 0 bus info: pci@0000:02:00.0 logical name: wifi0 version: 01 serial: 00:15:af:cf:e2:ca width: 64 bits clock: 33MHz capabilities: pm msi pciexpress msix bus_master cap_list logical ethernet physical wireless configuration: broadcast=yes driver=ath_pci latency=0 multicast=yes wireless=IEEE 802.11g resources: irq:16 memory:fd7f0000-fd7fffff *-network description: Ethernet interface product: RTL8111/8168B PCI Express Gigabit Ethernet controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:05:00.0 logical name: eth0 version: 01 serial: 00:21:85:4d:82:78 size: 100MB/s capacity: 1GB/s width: 64 bits clock: 33MHz capabilities: pm vpd msi pciexpress bus_master cap_list rom ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=full ip=192.168.2.101 latency=0 link=yes multicast=yes port=MII speed=100MB/s resources: irq:27 ioport:c800(size=256) memory:fe2ff000-fe2fffff memory:fe2c0000-fe2dffff(prefetchable) lspci 00:00.0 Host bridge: ATI Technologies Inc RS690 Host Bridge 00:01.0 PCI bridge: ATI Technologies Inc RS690 PCI to PCI Bridge (Internal gfx) 00:04.0 PCI bridge: ATI Technologies Inc Device 7914 00:06.0 PCI bridge: ATI Technologies Inc RS690 PCI to PCI Bridge (PCI Express Port 2) 00:07.0 PCI bridge: ATI Technologies Inc RS690 PCI to PCI Bridge (PCI Express Port 3) 00:12.0 SATA controller: ATI Technologies Inc SB600 Non-Raid-5 SATA 00:13.0 USB Controller: ATI Technologies Inc SB600 USB (OHCI0) 00:13.1 USB Controller: ATI Technologies Inc SB600 USB (OHCI1) 00:13.2 USB Controller: ATI Technologies Inc SB600 USB (OHCI2) 00:13.3 USB Controller: ATI Technologies Inc SB600 USB (OHCI3) 00:13.4 USB Controller: ATI Technologies Inc SB600 USB (OHCI4) 00:13.5 USB Controller: ATI Technologies Inc SB600 USB Controller (EHCI) 00:14.0 SMBus: ATI Technologies Inc SBx00 SMBus Controller (rev 14) 00:14.1 IDE interface: ATI Technologies Inc SB600 IDE 00:14.2 Audio device: ATI Technologies Inc SBx00 Azalia (Intel HDA) 00:14.3 ISA bridge: ATI Technologies Inc SB600 PCI to LPC Bridge 00:14.4 PCI bridge: ATI Technologies Inc SBx00 PCI to PCI Bridge 00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration 00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map 00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller 00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control 01:05.0 VGA compatible controller: ATI Technologies Inc RS690M [Radeon X1200 Series] 01:05.2 Audio device: ATI Technologies Inc Radeon X1200 Series Audio Controller 02:00.0 Ethernet controller: Atheros Communications Inc. AR5001 Wireless Network Adapter (rev 01) 05:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 01) 06:04.0 CardBus bridge: O2 Micro, Inc. OZ711MP1/MS1 MemoryCardBus Controller (rev 21) 06:04.2 SD Host controller: O2 Micro, Inc. Integrated MMC/SD Controller (rev 01) 06:04.3 Bridge: O2 Micro, Inc. Integrated MS/xD Controller (rev 01) 06:04.4 FireWire (IEEE 1394): O2 Micro, Inc. Firewire (IEEE 1394) (rev 02) less /proc/modules | grep ath ath_rate_sample 11476 1 - Live 0xf812b000 ath_pci 193197 0 - Live 0xf85c3000 wlan 222892 5 wlan_wep,wlan_scan_sta,ath_rate_sample,ath_pci, Live 0xf8537000 ath_hal 398604 3 ath_rate_sample,ath_pci, Live 0xf8480000 I've been at this for hours now, also tried ndiswrapper and ath5k drivers with no luck, and really could use some help. Cheers.

  Read the article

< Previous Page | 17 18 19 20 21 22  | Next Page >