Search Results

Search found 10651 results on 427 pages for 'modem manager'.

Page 21/427 | < Previous Page | 17 18 19 20 21 22 23 24 25 26 27 28  | Next Page >

• Internet Connection not working - USB LAN connection - from particular modem

  - by Paul

  I am trying to fix Internet connection on a friends Dell inspiron 1720 with XP service pack 3. It has an integrated network card that stopped working, after powering down/up the modem still didnt work I brought it back to my place to try a few things ie check cable, update driver etc... still didnt work. So I bought a USB LAN connector. It didnt work straight away but I went to configure the properties and changed the ConnectionType from AutoSense to 100 BaseT 10BaseT Full_Duplex, I basically just tried them all. From my place when connected to my desktop - 10 BaseT and 10BaseT Full_Duplex worked. From my place When connected to their laptop - 10 BaseT and 10BaseT Full_Duplex worked. Happy I went back to my friends house confident it would all work, and it didnt. Brought it back to mine and it did. While there, in Network Connections the connection is there recognized, enabled, 'working properly' it just says not connected. Also there is no led on the USB connector While at mine as above except there is an led on the USB connector and it says connected. Other difference I can think of is they have a cable modem, I'm plugged into the back of a Belkin wireless router - would this make a difference? Any other ideas what to try? (Would getting the model of the cable modem help anyone?) The USB connector is "DM9601 USB to Fast Ethernet"

  Read the article

• Netgear CG3000D new Modem/Router - Random High Ping

  - by justin.chmura

  Cox just recently came out and looked at my internet and decided that the modem I had was causing high latency issue. The speed was fine but the ping would spike to around 100 and over when gaming or putting a load more than browsing on the line. After they replaced it, it seems like I get better latency, but when it spikes, I get upwards of over 300 ping with like 500 jitter. I figured I would hit the serverfault universe before sending another email to Cox. I opted not to do the Cox setup as it was an extra $20 which I thought would have just setup the wireless (which I can handle). Is it a setting or something that I missed that needs to be setup? The firmware for the CG3000D is awful and not fun to use. I did change some hidden settings on the RgServices.asp page (I'll attach a screenshot). I've also heard that the Router/Modem combos are awful and that I should go back and just ask for a modem stand-alone. Any input is helpful. All screenshots: http://imgur.com/a/JX6qu#0

  Read the article

• Motorola Surfboard SB6121 modem conected to 2WIREi38HG wireless router but there's no internet access

  - by Jessica

  I have just switched to Comcast cable internet from AT&T Uverse and I was hoping to use the 2WIRE wireless router with the new Surfboard modem so I can have wireless access. I messed around with some settings and got it working for my laptop (I'm not terribly well versed in computer stuff; I think it was mostly luck) for about a week. The other day I tried to get online and there was no internet connection. I restarted the equipment with no success and then plugged the modem directly into the laptop. This worked, so I knew there was no outage. I connected the ethernet cord to the router and a second cord to my laptop and that worked, too. But when I tried again just with the wireless the laptop connects to the router, but doesn't recognize it or find an internet connection. I tried to go to http://gateway.2Wire.net to fiddle with the settings, but all I get is a Server Not Found page. I tried to check the ip address but this is really kind of over my head and I get different things checking it while plugged into only the modem vs when I plug into the router. Can anyone help? The frustrating thing is that I had it working for awhile, so I know it can do it!

  Read the article

• Network outage caused by SMC8013WG Cable Modem/Router ?

  - by mkocubinski

  At work, we have a basic Class C Network. The gateway/router is a SMC8013WG (stock comcast commercial cable modem), and simple unmanaged switch (HP Pro Curve 1400 24G). The SMC8013WG is our default gateway as well as DHCP server. Periodically, I'd say almost every other day.. the entire network will just stop responding. I won't be able to ping/see the gateway, any computers on our local network, or anything on the internet. The only way to fix this is to unplug the Comcast cable modem, wait, and plug back in. This unfailingly fixes the problem. But this doesn't make much sense to me.. shouldn't the network still be fine locally, since everything is plugged into the switch anyway? Why would resetting the router fix this? Can anyone suggest anything to check to in order to narrow this problem down? Just to be clear.. here is the basic topology: { Internet } -- (12.345.67.89) Comcast Cable Modem (192.168.1.1) -- Switch -- 192.168.1.2-254 P.S. Our IT guy is in about 3 hours a day every other week or so, so.. we're kind of on our own most of the time.

  Read the article

• How to turn a DSL wireless modem to a wifi hub

  - by my_question

  I used to use DSL for my home internet and used Qwest Q1000 wireless modem. Now I switched to cable and use wireless router to cover the home. One problem is I just bought a desktop and I like to put it in a place far away from the router. The desktop only has cable interface, it does not receive wifi. The obvious solution is I go buy that little USB dongle which can receive wifi and plug it to the desktop. But before doig that, I am wondering if somehow I can re-use the Q1000 modem. The modem has 4 LAN ports and it has wifi antenna. I tried connecting the desktop to Q1000's LAN port, the system shows wire connection is in place, but I cannot access internet. It seems to me Q1000's wifi function is to broadcast the wifi signal out instead of receiving signal. I went to the Q1000 configuration page by going to web page of "192.168.0.1", it is not clear how to set it up. I also wonder one thing, my home wifi is encrypted, so if I want to let Q1000 to join the wifi, I need to somehow type in the password, I am not sure how to do that either. Anyway, maybe this thing cannot be used in this fashion. If you have any suggestion, please shed some light. Thanks.

  Read the article

• How to kill tasks in Windows 7 when even Task Manager won't open or respond?

  - by endolith

  Occasionally one of my computers will get so bogged down that everything locks up, Ctrl+Alt+Del doesn't work, Task Manager won't open, or they work, but are opening so slowly that it will take hours or days to shut down other processes and regain control of the computer, etc. Is there a way to, for instance, force Task Manager to be highest priority so it always opens immediately with Ctrl+Shift+Esc even when some other process/driver is hogging the CPU? Is there some other program that can run in the background and open immediately like this? This question isn't about fixing "underlying problems". No matter how much memory you have, it's still possible for a rogue process to eat it all up and lock up the computer in page fault thrashing, hog the CPU, etc. This question is about how to take back control of the computer when that happens. Basically when these kind of lock-ups happen, I want to open some kind of task manager that pauses every other process and allows me to kill one of them, and then let everything resume so I can save my work, etc. Otherwise my only option is to hold down the power button. Antifreeze is supposed to do exactly what i want, pausing all other applications and starting a task manager to kill the offender, but in my testing, it actually does neither.

  Read the article

• Package Manager Console For More Than Managing Packages

  - by Steve Michelotti

  Like most developers, I prefer to not have to pick up the mouse if I don’t have to. I use the Executor launcher for almost everything so it’s extremely rare for me to ever click the “Start” button in Windows. I also use shortcuts keys when I can so I don’t have to pick up the mouse. By now most people know that the Package Manager Console that comes with NuGet is PowerShell embedded inside of Visual Studio. It is based on its PowerConsole predecessor which was the first (that I’m aware of) to embed PowerShell inside of Visual Studio and give access to the Visual Studio automation DTE object. It does this through an inherent $dte variable that is automatically available and ready for use. This variable is also available inside of the NuGet Package Manager console. Adding a new class file to a Visual Studio project is one of those mundane tasks that should be easier. First I have to pick up the mouse. Then I have to right-click where I want it file to go and select “Add –> New Item…” or “Add –> Class…”   If you know the Ctrl+Shift+A shortcut, then you can avoid the mouse for adding a new item but you have to manually assign a shortcut for adding a new class. At this point it pops up a dialog just so I can enter the name of the class I want. Since this is one of the most common tasks developers do, I figure there has to be an easier way and a way that avoids picking up the mouse and popping up dialogs. This is where your embedded PowerShell prompt in Visual Studio comes in. The first thing you should do is to assign a keyboard shortcut so that you can get a PowerShell prompt (i.e., the Package Manager console) quickly without ever picking up the mouse. I assign “Ctrl+P, Ctrl+M” because “P + M” stands for “Package Manager” so it is easy to remember:   At this point I can type this command to add a new class: PM> $dte.ItemOperations.AddNewItem("Code\Class", "Foo.cs") which will result in the class being added: At this point I’ve satisfied my original goal of not having to pick up a mouse and not having the “Add New Item” dialog pop up. However, having to remember that $dte method call is not very user-friendly at all. The best thing to do is to make this a re-usable function that always loads when Visual Studio starts up. There is a $profile variable that you can use to figure out where that location is for your machine: PM> $profile C:\Users\steve.michelotti\Documents\WindowsPowerShell\NuGet_profile.ps1 If the NuGet_profile.ps1 file does not already exist, you can just create it yourself and place it in the directory. Now you can put a function inside like this: 1: function addClass($className) 2: { 3: if ($className.EndsWith(".cs") -eq $false) { 4: $className = $className + ".cs" 5: } 6: 7: $dte.ItemOperations.AddNewItem("Code\Class", $className) 8: } Since it’s in the NuGet_profile.ps1 file, this function will automatically always be available for me after starting Visual Studio. Now I can simply do this: PM> addClass Foo At this point, we have a *very* nice developer experience. All I did to add a new class was: “Ctrl-P, Ctrl-M”, then “addClass Foo”. No mouse, no pop up dialogs, no complex commands to remember. In fact, PowerShell gives you auto-completion as well. If I type “addc” followed by [TAB], then intellisense pops up: You can see my custom function appear in intellisense above. Now I can type the next letter “c” and [TAB] to auto-complete the command. And if that’s still too many key strokes for you, then you can create your own PowerShell custom alias for your function like this: PM> Set-Alias addc addClass PM> addc Foo While all this is very useful, I did run into some issues which prompted me to make even further customization. This command will add the new class file to the current active directory. Depending on your context, this may not be what you want. For example, by convention all view model objects go in the “Models” folder in an MVC project. So if the current document is in the Controllers folder, it will add your class to that folder which is not what you want. You want it to always add it to the “Models” folder if you are adding a new model in an MVC project. For this situation, I added a new function called “addModel” which looks like this: 1: function addModel($className) 2: { 3: if ($className.EndsWith(".cs") -eq $false) { 4: $className = $className + ".cs" 5: } 6: 7: $modelsDir = $dte.ActiveSolutionProjects[0].UniqueName.Replace(".csproj", "") + "\Models" 8: $dte.Windows.Item([EnvDTE.Constants]::vsWindowKindSolutionExplorer).Activate() 9: $dte.ActiveWindow.Object.GetItem($modelsDir).Select([EnvDTE.vsUISelectionType]::vsUISelectionTypeSelect) 10: $dte.ItemOperations.AddNewItem("Code\Class", $className) 11: } First I figure out the path to the Models directory on line #7. Then I activate the Solution Explorer window on line #8. Then I make sure the Models directory is selected so that my context is correct when I add the new class and it will be added to the Models directory as desired. These are just a couple of examples for things you can do with the PowerShell prompt that you have available in the Package Manager console. As developers we spend so much time in Visual Studio, why would you not customize it so that you can work in whatever way you want to work?! The next time you’re not happy about the way Visual Studio makes you do a particular task – automate it! The sky is the limit.

  Read the article

• Changing internal home network ip address for connected devices

  - by oshirowanen

  I have a few computers at home. For each of the computers, I can see the internal home network ip address on any given device by typing in ifconfig in the terminal. If the device is connected to the home network via ethernet connection or via the built-in wireless connections in laptops, the internal ip address for each of the devices seems to be 192.168.0.X. However, when I connect one of the devices using an external usb modem wireless adapter, which connects to the home network through wireless, when I check the ip address via ifconfig, for some reason it gets assigned 192.168.42.X instead. Why are the ethernet and build in wireless connections getting 192.168.0.X, but the external usb wireless adapter gets 192.168.42.X? Most importantly, is it possible to force it to get an internal ip address of 192.168.0.X?

  Read the article

• Unable to connect via Mobile Broadband - But its detected - 12.10

  - by Rexford

  Previously (on ubuntu 12.04), i will just connect my 3G mobile broadband modem, and will start browsing after enabling it and going through the setup process. However, on the 12.10, I'm able to setup my connection, but it doesn't connect to the internet. All settings are okay. I've tried two different network providers in Ghana, still, i'm not able to connect. At times, i'm notified that, its connected to the "home network" of the service provider, but disconnects in less than 10 seconds. Is it supposed to be a bug? I've been reading about the wvdial, but I'm wondering something that used to be possible by "default" in Ubuntu should now be "configured" via a software. Help!

  Read the article

• Telephone Call Answering Machine

  - by Buford T. Justice

  I have been looking for a telephone call answering machine program for Linux, but I haven't had much luck. In Windows, I have used CallStation (http://imptec.com/callstation.htm) for many years. I am looking for something like CallStation where calls can be answered or hung-up on, faxes can be received, Caller ID is shown, calls can be recorded in their entirety, etc. Is there anything like that for Linux? In fact now in Windows (I believe this started with either Windows XP or Vista) calls and recordings can only be recorded for like 55 seconds. I have heard it is because Microsoft changed something with Windows' voice modem support. I am hoping Linux does not suffer from this.

  Read the article

• Home ADSL Modem Dropping Packets?

  - by Cody

  I know this is supposed to be a "pro" forum, but I'm hoping someone can help since my ISP isn't doing much to try and fix things. My ISP has given me a DSL modem / Router combo - a ADB / Pirelli P.DG A2100N and I have a 4096 / 767 kbps connection. I use it purely as modem and router, and have the wireless AP feature turned off. I run it to a Ubiquiti Networks Toughswitch and use a Ubiquiti UAP as the wireless access point - although I've ran tests directly wired to the router with nothing else connected, and still see the same issues. I've been having issues where latency suddenly spikes from 8ms to google.com to 250+ if someone does anything on the internet. If I run a speedtest or something, I can see latencies above 3000ms. Regularly when downloading something, even if the speed is throttled to , it can get random drops to 0kbps every few seconds. Online gaming is impossible because I notice the sudden lag-outs in the connection, and video streams or VoIP drop out as well - it's not at all consistent. I managed to find the password to my modem and I don't think I see anything wrong with the settings - but I looked for the logs and found this: Jun 6 17:10:30 user warn kernel: nf_conntrack: table full, dropping packet. Jun 6 17:10:30 user warn kernel: nf_conntrack: table full, dropping packet. Jun 6 17:10:31 user warn kernel: nf_conntrack: table full, dropping packet. Jun 6 17:10:40 user warn kernel: __ratelimit: 63 callbacks suppressed Jun 6 17:10:40 user warn kernel: nf_conntrack: table full, dropping packet. Jun 6 17:10:40 user warn kernel: nf_conntrack: table full, dropping packet. Jun 6 17:10:40 user warn kernel: nf_conntrack: table full, dropping packet. Jun 6 17:10:40 user warn kernel: nf_conntrack: table full, dropping packet. Jun 6 17:10:40 user warn kernel: nf_conntrack: table full, dropping packet. Jun 6 17:10:40 user warn kernel: nf_conntrack: table full, dropping packet. Jun 6 17:11:22 user warn kernel: nf_conntrack: table full, dropping packet. Jun 6 17:11:23 user warn kernel: nf_conntrack: table full, dropping packet. Jun 6 17:11:24 user warn kernel: nf_conntrack: table full, dropping packet. Jun 6 17:11:24 user warn kernel: nf_conntrack: table full, dropping packet. Jun 6 17:11:24 user warn kernel: nf_conntrack: table full, dropping packet. Jun 6 17:11:24 user warn kernel: nf_conntrack: table full, dropping packet. Jun 6 17:11:24 user warn kernel: nf_conntrack: table full, dropping packet. Jun 6 17:11:25 user warn kernel: nf_conntrack: table full, dropping packet. Jun 6 17:11:25 user warn kernel: nf_conntrack: table full, dropping packet. Jun 6 17:11:25 user warn kernel: nf_conntrack: table full, dropping packet. Jun 6 17:11:29 user warn kernel: __ratelimit: 15 callbacks suppressed Jun 6 17:11:29 user warn kernel: nf_conntrack: table full, dropping packet. Jun 6 17:11:29 user warn kernel: nf_conntrack: table full, dropping packet. Jun 6 17:11:30 user warn kernel: nf_conntrack: table full, dropping packet. Jun 6 17:11:30 user warn kernel: nf_conntrack: table full, dropping packet. Jun 6 17:55:26 user warn kernel: bcmxtmcfg: OAM loopback response not received on VCC 1.1.3 Jun 6 17:55:27 user warn kernel: bcmxtmcfg: OAM loopback response not received on VCC 1.1.4 So, as I understand it, it appears the router is dropping packets? If that's the case, is there anything in the config that I can change? Or should I buy a new router, a new modem, or both?

  Read the article

• What's the best scenario for using a wireless router with Comcast Business Class

  - by Buck

  Just had Comcast Business Class internet installed (usage details at bottom of post). During the call to order I asked about the hardware they'd be providing and was told it was a docsis 3 modem that I'd have to pay $7.00/month for. Figuring I'd have to buy a router anyway, I decided to get my own modem - a Surfboard SB6121 Docsis 3. I called in to tech support to ask some questions and learned that the modem they would have provided DID have a router built in. It's an SMCD3G-CCR. It's not wireless (we need wireless). The guy explained that it was better to have their hardware here because if there's a problem with our service and we're using our own hardware, chances are they'll blame it on our hardware and do nothing since they don't support it. He explained that I could still hang my own wireless router off their modem/router and if we ever had any service problems, we'd be able to plug directly into their hardware and they'd be able to tell where the problem is and they wouldn't be able to pawn it off onto "customer provided equipment". That all said, a few questions: 1. Am I better off returning my Surfboard modem and getting the Comcast one? If I get a wireless router and plug into one of the ethernet ports of the Comcast device, should I NOT plug anything else into the Comcast device since it would be a different network from anything connecting via the wireless router? Is that correct? Given that I know VERY LITTLE about networking and setting up hardware like this... since I need wireless and will HAVE to get a wireless router to work with this Comcast device, do I need to do anything with the settings of the Comcast device? Do I use security on the Comcast device or the wireless router or both? Any suggestions or anything I need to think about, given this scenario, in order to use a business-type voip service like RingCentral or Jive or Nextiva? Any recommendations on a wireless router for this scenario? We are running 2 PCs (possibly 3-4 in the future) - could be wired for the time being if needed but would prefer wireless; would like to have a networked hard drive and a networked printer; NEED business-type VOIP service asap for 2 phone lines. Would like to hook up some IP cameras at some point (but not the kind that require static IPs since I don't have one nor do I plan to pay Comcast another $15/month for one). I don't have or plan to have any type of web servers or anything like that. Want to use WPA or WPA2 security and take advantage of the NAT feature of the router for additional protection (that's the extent of my networking knowledge).

  Read the article

• Project Manager that wants to lock in time estimate with a signed contract

  - by sunpech

  At a previous employment, a project manager (PM) wasn't satisfied with the delivery time of the code on a project I was on. I was told by my project lead that that the PM was considering having me sign a contract to lock-in my time estimates I gave for tasks and delivery dates. The situation on the project was that we were working with new technologies, codebase, coding standards, and very prone-to-change requirements. I was learning new things and applying them the best I could on requirements that kept on changing. The requirements throughout the iterations grew by 2-3 times, with my estimate-to-complete growing by roughly 5-8 times. The only things that didn't change were the estimates and delivery dates. Yes, I did end up missing most deadlines. And I was working on some very new technologies that no one else on the entire development team could really help out on because they wouldn't be familiar with it. At least not easily. It seemed to me then, that the PM wanted his numbers to add up-- and thus wanted me to sign a contract to "ensure" that I would always deliver working code on time. I suppose with a signed contract the PM could use it against me if I couldn't deliver on time. I believe what happened next was that other project managers and/or project leads defended me, and didn't let this happen. My question is, should this raise a red flag about the manager? Is it common practice for a manager to lock-in time estimates of a software developer with a signed contract? Or in this case, try to. Please note, I was a full time employee, not an independent consultant. Update: I want to add that I did give new estimates weekly, but it seems the original estimates and delivery dates were what the PM was fixated on.

  Read the article

• Oracle Configuration Manager for HRMS / EBS Customers

  - by Robert Story

  Upcoming WebcastTitle: Oracle Configuration Manager for HRMS / EBS CustomersDate: April 9, 2010 Time: 11:00 am EDT, 8:00 am PDT, 8:30 pm IST Product Family: EBS HRMS Summary The webcast will focus on Highlights and Benefits of using Oracle Configuration Manager for HRMS / EBS Customers. The one-hour session is recommended for functional / technical EBS HRMS users and system administrators. Along with key highlights of Oracle Configuration Manager, the usage especially in debugging EBS and HRMS issues will be discussed. Topics will include: OCM Overview Data Collection and its usage Key Benefits for HRMS / EBS customers Change History. EBS HRMS Stat Pack. Deployed Customizations. Project management and Mile Stones. Resources & References A short, live demonstration (only if applicable) and question and answer period will be included. Click here to register for this session....... ....... ....... ....... ....... ....... .......The above webcast is a service of the E-Business Suite Communities in My Oracle Support.For more information on other webcasts, please reference the Oracle Advisor Webcast Schedule.Click here to visit the E-Business Communities in My Oracle Support Note that all links require access to My Oracle Support.

  Read the article

• 10 Innovations in PeopleSoft 9.2 - #2 Lower TCO With The Peoplesoft Update Manager

  - by John Webb

  With the new PeopleSoft Update Manager in PeopleSoft 9.2 the way you manage updates to your PeopleSoft systems puts you in control of all changes on your schedule.   You can selectively apply patches with reduced time, effort, and cost.    Bundles and Maintenance Packs are no longer used.      Instead, a tailored custom package is automatically generated based on the parameters you select from the latest PeopleSoft source image.   You have access to all updates from Oracle on a cumulative basis and can select and search for specific updates such as new features, legal and regulatory changes, or a patch related to a specific issue, process or object.    Any prerequisites are automatically identified.  The  process of generating a change package is enabled through a new wizard with easy to follow steps and options.     As changes are introduced to your test environment the PeopleSoft Test Framework provides a closed loop process to run regression tests scripts against your changes.  For a quick overview of the PeopleSoft Update Manager check out the Video Feature Overview here: PeopleSoft Update Manager Video Feature Overview

  Read the article

• How to maintain symlinks in linux file manager?

  - by MountainX

  I want to use symlinks extensively. However, if I move the target file, the symlink becomes broken (unlike on Windows). That's not acceptable to me, so I either need a solution or I won't be able to use symlinks the way I wish to. Is there a solution that will work with Dolphin file manager? A command line solution is described on commandlinefu. In summary, it is something like one of these: lmv(){for a in ${@:1:$(expr $#-1)};do [ -e "$a" -a -e "${@:$#:1}" ] && mv "$a";"${@:$#:1}" && ln -s "${@:$#:1}"/"$(basename "$a")";"$(dirname "$a")";done} lmv(){for a in ${@:1:$(expr $#-1)};do [ -e "$a" -a -e "${@:$#}" ] && mv "$a";"${@:$#}" && ln -s "${@:$#}"/"$(basename "$a")";"$(dirname "$a")";done} But about half the time I'm using a file manager (Dolphin), so I need a complete solution to this problem. Is a solution available for a GUI file manager? EDIT: The context of this question is that I'm searching for an alternative to hardlinks. I previously asked this question about the pitfalls of hardlinks.

  Read the article

• Oracle Identity Manager ADF Customization

  - by Arda Eralp

  This blog entry includes an example about customization Oracle Identity Manager (OIM) Self Service screen. Before customization all users that can be logged in OIM Self Service can see "Administration" tab on left menu. On this example we create "Managers" role and only users that have managers role can see "Administration" tab. Step 1: Create "Manager" role  Step 2: Create Sandbox  Step 3: Customize ADF Select "Customize" on the top menu Select "Source" instead of "Design" on top  Select "Administration" tab with blue rectangle and edit component Edit "visible" with expression builder #{oimcontext.currentUser.roles['Manager'] != null} Apply Step 4: Apply to All and Publish sandbox Notes:  This table objects can use for expression. Objects Description #{oimcontext.currentUser['ATTRIBUTE_NAME']} #{oimcontext.currentUser['UDF_NAME']} #{oimcontext.currentUser.roles} #{oimcontext.currentUser.roles['SYSTEM ADMINISTRATORS'] != null} Boolean #{oimcontext.currentUser.adminRoles['OrclOIMSystemAdministrator'] != null} Boolean

  Read the article

• Enterprise Manager 12c Grand Tour Customer/Partner Workshop

  - by mseika

  EMEA | Customer/Partner Workshop EMEA Oracle Solution Centre Enterprise Manager 12c Grand Tour Customer/Partner Workshop em.us.oracle.com On the WebSales ToolsCollateral Enterprise Manager 12c Grand Tour Customer/Partner Workshop The EMEA OSC is hosting a one day Customer/Partner Oracle Enterprise Manager 12c Grand Tour workshop in Thames Valley Park, Reading, UK on 31 Oct and 01 Nov 2012. The Workshop gives attendees a good insight into the latest release by highlighting several new functional areas of the product. The format of the day will provide opportunity for discussion as well as a number of presentations and exercises covering: EM User Interface Monitoring and Framework Database Lifecycle Management Database Management Middleware Management Using comprehensive workbooks attendees will be able to follow step-by-step instructions, with OSC SME's being on hand for any questions, to gain ‘hands on’ experience of EM12c functionality. Logistics Dates31 Oct and 01 Nov 2012 Time10:00 - 16:00 LocationOracle Solution Center, Oracle 520 Thames Valley Park, Reading, RG6 1RA Space is limited. If you have a customer/partner who would like to attend please register their details: For Wed 31 Oct 2012 REGISTER For Thu 01 Nov 2012REGISTER . Please note that this workshop is ONLY for customers/partners and seats will not be allocated to Oracle employees.

  Read the article

• Ubuntu 12.04 Network Manager: unable to save manual setting to set up a static ip

  - by Andy

  I am fairly familiar with setting up servers, and ubuntu is generally my flavor of choice, but I just installed 12.04 desktop and I am seeing some behavior in network manager that is really puzzling. The network connection works fine if I leave it set on dhcp, but I would like a static IP address for my new web server. When I go into network manager and edit the connection for the one and only NIC I can select MANUAL from the dropdown menu but as soon as I do the Save button becomes greyed out. Even after filling out all fields for the connection it is still grey and I am unable to save the static IP connection information. Any thoughts would be greatly appreciated. I'm hoping there is just some new setting that I am unaware of.... On another note, if I stop the network manager and go edit the interfaces file (and the appropriate hosts/routes/dns files), I do get a static ip address assigned and I can contact my server from the outside, however, the server cannot find the internet. Can't ping even its own ip... I can ping the loopback interface though. I'm really confused on this one. Hoping someone can offer some help.

  Read the article

• Software Manager who makes developers do Project Management

  - by hdman

  I'm a software developer working in an embedded systems company. We have a Project Manager, who takes care of the overall project schedule (including electrical, quality, software and manufacturing) hence his software schedule is very brief. We also have a Software Manager, who's my boss. He makes me write and maintain the software schedule, design documents (high and low level design), SRS, change management, verification plans and reports, release management, reviews, and ofcourse the software. We only have one Test Engineer for the whole software team (10 members), and at any given time, there are a couple of projects going on. I'm spending 80% of my time making these documents. My boss comes from a Process background, and believes what we need is better documentation to improve software: (1) He considers the design to be paramount, coding is "just writing the design down", it shouldn't take too long, and "all the code should be written before the hardware is ready". (2) Doesn't understand the difference between a Central & Distributed Version control, even after we told him its easier to collaborate with a distributed model. (3) Doesn't understand code, and wants to understand every bug and its proposed solution. (4) Believes verification should be done by developer, and validation by the Tester. Thing is though, our verification only checks if implementation is correct (we don't write unit tests, its never considered in the schedule), and validation is black box testing, so the units tests are missing. I'm really confused. (1) Am I responsible for maintaining all these documents? It makes me feel like I'm doing the Software Project Management, in essence. (2) I don't really like creating documents, I want to solve problems and write code. In my experience, creating design documents only helps to an extent, its never the solution to better or faster code. (3) I feel the boss doesn't really care about making better products, but only about being a good manager in the eyes of the management. What can I do?

  Read the article

• Oracle Enterprise Manager 12c Testing-as-a-Service Solution

  - by user810030

  With organizations spending as much as 50 percent of their QA time with non-test related activities like setting up hardware and deploying applications and test tools, the cloud will bring obvious benefits. A key component of Oracle Enterprise Manager our current Application Quality Management products have been helping our customers with application load testing, functional testing and test process management, but also test data management, data masking and real application testing. These products enable customers to thoroughly test applications and their underlying infrastructure to help ensure the best quality, scalability and availability prior to deployment.  Today, Oracle announced Oracle Enterprise Manager 12c Testing-as-a-Service Solution . This solution will allow users to significantly decrease the time needed to setup a complete test environment, while enhancing testing efficiency. Please read the Press Release mentioned above and join us in our Enterprise Manager LinkedIn Group discussion on this topic. (need to be a member). Or visit our booth this week during the EuroSTAR Software Testing conference in Amsterdam where we can demo this solution  I hope you find this helpfull Stay Connected: Twitter |  Facebook |  YouTube |  Linkedin |  Newsletter

  Read the article

• Community TFS Build Manager available for Visual Studio 2012 RC

  - by Jakob Ehn

  I finally got around to push out a version of the Community TFS Build Manager that is compatible with Visual Studio 2012 RC. Unfortunately I had to do this as a separate extension, it references different versions of the TFS assemblies and also some properties and methods that the 2010 version uses are now obsolete in the TFS 2012 API. To download it, just open the Extension Manager, select Online and search for TFS Build:   You can also download it from this link: http://visualstudiogallery.msdn.microsoft.com/cfdb84b4-285e-4eeb-9fa9-dad9bfe2cd10 The functionality is identical to the 2010 version, the only difference is that you can’t start it from the Team Explorer Builds node (since the TE has been completely rewritten and the extension API’s are not yet published). So, to start it you must use the Tools menu: We will continue shipping updates to both versions in the future, as long as it functionality that is compatible with both TFS 2010 and TFS 2012. You might also note that the color scheme used for the build manager doesn’t look as good with the VS2012 theme….   Hope you will enjoy the tool in Visual Studio 2012 as well. I want to thank all the people who have downloaded and used the 2010 version! For feedback, feature requests, bug reports please post this to the CodePlex site: http://tfsbuildextensions.codeplex.com

  Read the article

• The Internet Key Wave MW833UP is not recognized in Ubuntu

  - by gio900

  I can't use my Onda MW833UP... :( Any advice? Here is something that someone else may understand: ~$: lsb_release -a No LSB modules are available. Distributor ID: Ubuntu Description: Ubuntu 11.10 Release: 11.10 Codename: oneiric ~$: lsusb Bus 001 Device 005: ID 1ee8:0012 ~$: dmesg [ 22.709475] cdc_acm 1-1:1.0: ttyACM0: USB ACM device [ 22.714856] usbcore: registered new interface driver cdc_acm [ 22.714866] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters [ 23.520490] ieee80211 phy0: wl_ops_bss_info_changed: arp filtering: enabled true, count 1 (implement) [ 24.244530] usbcore: registered new interface driver usbserial [ 24.244575] USB Serial support registered for generic [ 24.244673] usbcore: registered new interface driver usbserial_generic [ 24.244681] usbserial: USB Serial Driver core [ 24.265879] USB Serial support registered for GSM modem (1-port) [ 24.285680] usbcore: registered new interface driver option [ 24.285691] option: v0.7.2:USB Driver for GSM modems [ 24.425878] EXT4-fs (sda9): re-mounted. Opts: errors=remount-ro,commit=600 [ 24.736540] EXT4-fs (sda8): re-mounted. Opts: commit=600 [ 35.705796] Easy slow down manager: checking for SABI support. [ 35.706002] Easy slow down manager: SABI is supported (f5189) [ 36.060099] usbcore: deregistering interface driver uvcvideo [ 139.508061] CE: hpet increased min_delta_ns to 20113 nsec [ 6798.378917] usb 1-1: USB disconnect, device number 5 [ 6809.108232] usb 1-1: new high speed USB device number 6 using ehci_hcd [ 6809.242692] scsi5 : usb-storage 1-1:1.0 [ 6810.241257] scsi 5:0:0:0: CD-ROM Onda Datacard CD-ROM 0001 PQ: 0 ANSI: 0 [ 6810.241841] scsi 5:0:0:1: Direct-Access Onda Storage 0001 PQ: 0 ANSI: 0 [ 6810.271410] sr0: scsi3-mmc drive: 0x/0x caddy [ 6810.272099] sr 5:0:0:0: Attached scsi CD-ROM sr0 [ 6810.272852] sr 5:0:0:0: Attached scsi generic sg1 type 5 [ 6810.279954] sd 5:0:0:1: [sdb] Attached SCSI removable disk [ 6810.281210] sd 5:0:0:1: Attached scsi generic sg2 type 0 [ 6810.380591] sr0: CDROM (ioctl) error, command: Xpwrite, Read disk info 51 00 00 00 00 00 00 00 02 00 [ 6810.380617] sr: Sense Key : Hardware Error [current] [ 6810.380625] sr: Add. Sense: No additional sense information [ 6810.613937] sr0: CDROM (ioctl) error, command: Xpwrite, Read disk info 51 00 00 00 00 00 00 00 02 00 [ 6810.613972] sr: Sense Key : Hardware Error [current] [ 6810.613984] sr: Add. Sense: No additional sense information [ 6810.673716] usb 1-1: USB disconnect, device number 6 [ 6815.572142] usb 1-1: new high speed USB device number 7 using ehci_hcd [ 6815.706828] cdc_acm 1-1:1.0: ttyACM0: USB ACM device The last 3 lines are where I inserted the Internet key, then reconnected it. usb-device T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 7 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=1ee8 ProdID=0012 Rev=00.01 S: Manufacturer=Onda S: Product=MW833UP S: SerialNumber=9230B35D870F9CB7AE684EACC5C12BE5EC33B26E C: #Ifs= 2 Cfg#= 1 Atr=a0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=02 Prot=01 Driver=cdc_acm I: If#= 1 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_acm Then there is /dev/ttyACM0. When the key is connected to the USB port, everything that will meant...

  Read the article

• ASP.NET Performance tip- Combine multiple script file into one request with script manager

  - by Jalpesh P. Vadgama

  We all need java script for our web application and we storing our JavaScript code in .js files. Now If we have more then .js file then our browser will create a new request for each .js file. Which is a little overhead in terms of performance. If you have very big enterprise application you will have so much over head for this. Asp.net Script Manager provides a feature to combine multiple JavaScript into one request but you must remember that this feature will be available only with .NET Framework 3.5 sp1 or higher versions.  Let’s take a simple example. I am having two javascript files Jscrip1.js and Jscript2.js both are having separate functions. //Jscript1.js function Task1() { alert('task1'); } Here is another one for another file. ////Jscript1.js function Task2() { alert('task2'); } Now I am adding script reference with script manager and using this function in my code like this. <form id="form1" runat="server"> <asp:ScriptManager ID="myScriptManager" runat="server" > <Scripts> <asp:ScriptReference Path="~/JScript1.js" /> <asp:ScriptReference Path="~/JScript2.js" /> </Scripts> </asp:ScriptManager> <script language="javascript" type="text/javascript"> Task1(); Task2(); </script> </form> Now Let’s test in Firefox with Lori plug-in which will show you how many request are made for this. Here is output of that. You can see 5 Requests are there. Now let’s do same thing in with ASP.NET Script Manager combined script feature. Like following <form id="form1" runat="server"> <asp:ScriptManager ID="myScriptManager" runat="server" > <CompositeScript> <Scripts> <asp:ScriptReference Path="~/JScript1.js" /> <asp:ScriptReference Path="~/JScript2.js" /> </Scripts> </CompositeScript> </asp:ScriptManager> <script language="javascript" type="text/javascript"> Task1(); Task2(); </script> </form> Now let’s run it and let’s see how many request are there like following. As you can see now we have only 4 request compare to 5 request earlier. So script manager combined multiple script into one request. So if you have lots of javascript files you can save your loading time with this with combining multiple script files into one request. Hope you liked it. Stay tuned for more!!!.. Happy programming.. Technorati Tags: ASP.NET,ScriptManager,Microsoft Ajax

  Read the article

• Port forwarding with multiple IP's

  - by Jon

  I work at a company which uses a Fortigate 60 router, something I'm not really familiar with. Everything worked fine with it until a week ago when Comcast came in and replaced our modem. It seemed as though the process went smoothly - our connection came back up and our static IP remained the same. However, none of our port forwarding is working. What has me confused is the Comcast modem apparently has two IP addresses. The WAN2 interface for it in the Fortigate router is set to 10.1.10.10. However, all of our port forwarding settings are set to an external IP address of 10.1.10.50. Now this setup used to work fine, so something with the Comcast modem must have changed. How can I find out what? I tried setting a computer to a local IP of 10.1.10.15 so I could open up the web interface for the modem, but I can't even ping 10.1.10.10 when I do that. Any ideas? Thanks!

  Read the article

< Previous Page | 17 18 19 20 21 22 23 24 25 26 27 28  | Next Page >