Search Results

Search found 692 results on 28 pages for 'paranoid sysadmin'.

Page 21/28 | < Previous Page | 17 18 19 20 21 22 23 24 25 26 27 28  | Next Page >

• How to prevent an SSD from disappearing from BIOS

  - by Midimatt

  I've only recently upgraded my old machine to a new one with a brand new 60gb SSD as my boot drive and a 1TB main drive. Paranoid about completely breaking my SSD, I read up on a lot of issues that I needed to watch out for, including making sure AHCI was turned on and trim enabled. PC has been working fine for a few weeks now, until today. My wife was watching some TV on the machine when it started to act strange and eventually blue screened. She rebooted and the boot mgr was missing. When I got home from work I checked the BIOS and the drive had disappeared. I panicked and looked up some possible fixes, and I discovered a large amount of people having problems with the drive firmware, especially on OCZ Vertex and Agility drives, and my drive is an Agility 3 drive. The problems included blue screens followed by missing drives, and a solution was to reset the CMOS and try again. This worked, and now everything seems to be working fine. My question is, is there any way to prevent this from happening? Am I missing a setting for my SSD? All of the posts I found were from early to mid-2011 nothing for the end of 2011 to 2012. So I am wondering if I've missed anything. EDIT: Checked my drives firmware and it is 2.15, which has had issues reported by users.

  Read the article

• How do I know if I managed to completely remove an undetected trojan?

  - by ubuntuisbetter

  I catched a trojan that uses explorer.exe to reproduce itself in case of deletion of its autostart entry or main exe file in Programs/x. It had already tried to contact a suspicious server over explorer.exe, blocked that via my firewall. I: Removed the autostart entries from the registry Looked through my services if there was anything suspicious Deleted the trojan from Programs/ Went through System Volume Information to find a 2 month old explorer.exe and replaced the possibly infected one. There are no suspicious processes running now anymore (no duplicate explorer.exe) and nothing wants to connect this trojan owners sever either. I checked my system with several anti-malware programs too. What the trojan did: Started a second explorer.exe Always when I deleted the main trojan exe file it was reproduced (by the second explorer.exe) Always when I deleted the autostart entry it was reproduced by the explorer.exe too. When I terminated the suspicious explorer.exe, which used only half as much memory as the less suspicious one from Windows, a strange thing that I know from the computers in my Informatics class happened: A window popped up in the top left of my explorer-less desktop, titled "Personal settings for ... are ..." that obviously copied some files. Then both explorer.exes started again and the trojan was everywhere again. What did the trojan actually do to get explorer to rescue it? Is my PC clean of this newish trojan now? What are the other locations I should check for the trojan? The trjoan doesn't seem very high-level, could it have changed other system files or is the autostart entry vital for it? Thanks in advance, Your trojan paranoid friend (Getting linux in a week)

  Read the article

• Content Management for WebCenter Installation Guide

  - by Gary Niu

  Overvew As we known, there are two way to install Content Management for WebCenter. One way is install it by WebCenter installer wizard, another way is to install it use their own installer. This guide is for the later one. For SSO purpose, I also mentioned how to config OID identity store for Content Management for WebCenter. Content Management for WebCenter( 10.1.3.5.1) Oracle Enterprise Linux R5U4 Basic Installation -bash-3.2$ ./setup.sh Please select your locale from the list.           1. Chinese-Simplified           2. Chinese-Traditional           3. Deutsch          *4. English-US           5. English-UK           6. Español           7. Français           8. Italiano           9. Japanese          10. Korean          11. Nederlands          12. Português-Brazil Choice? Throughout the install, when entering a text value, you can press Enter to accept the default that appears between square brackets ([]). When selecting from a list, you can select the choice followed by an asterisk by pressing Enter. Select installation type from the list.         *1. Install new server          2. Update a server Choice? Content Server Installation Directory Please enter the full pathname to the installation directory. Content Server Core Folder [/oracle/ucm/server]:/opt/oracle/ucm/server Create Directory         *1. yes          2. no Choice? Java virtual machine         *1. Sun Java 1.5.0_11 JDK          2. Specify a custom Java virtual machine Choice? Installing with Java version 1.5.0_11. Enter the location of the native file repository. This directory contains the native files checked in by contributors. Content Server Native Vault Folder [/opt/oracle/ucm/server/vault/]: Create Directory         *1. yes          2. no Choice? Enter the location of the web-viewable file repository. This directory contains files that can be accessed through the web server. Content Server Weblayout Folder [/opt/oracle/ucm/server/weblayout/]: Create Directory         *1. yes          2. no Choice? This server can be configured to manage its own authentication or to allow another master to act as an authentication proxy. Configure this server as a master or proxied server.         *1. Configure as a master server.          2. Configure as server proxied by a local master server. Choice? During installation, an admin server can be installed and configured to manage this server. If there is already an admin server on this system, you can have the installer configure it to administrate this server instead. Select admin server configuration.         *1. Install an admin server to manage this server.          2. Configure an existing admin server to manage this server.          3. Don't configure an admin server. Choice? Enter the location of an executable to start your web browser. This browser will be used to display the online help. Web Browser Path [/usr/bin/firefox]: Content Server System locale           1. Chinese-Simplified           2. Chinese-Traditional           3. Deutsch          *4. English-US           5. English-UK           6. Español           7. Français           8. Italiano           9. Japanese          10. Korean          11. Nederlands          12. Português-Brazil Choice? Please select the region for your timezone from the list.         *1. Use the timezone setting for your operating system          2. Pacific          3. America          4. Atlantic          5. Europe          6. Africa          7. Asia          8. Indian          9. Australia Choice? Please enter the port number that will be used to connect to the Content Server. This port must be otherwise unused. Content Server Port [4444]: Please enter the port number that will be used to connect to the Admin Server. This port must be otherwise unused. Admin Server Port [4440]: Enter a security filter for the server port. Hosts which are allowed to communicate directly with the server port may access any resources managed by the server. Insure that hosts which need access are included in the filter. See the installation guide for more details. Incoming connection address filter [127.0.0.1]:*.*.*.* *** Content Server URL Prefix The URL prefix specified here is used when generating HTML pages that refer to the contents of the weblayout directory within the installation. This prefix must be mapped in the web server Additional Document Directories section of the Content Management administration menu to the physical location of the weblayout directory. For example, "/idc/" would be used in your installation to refer to the URL http://ucm.company.com/idc which would be mapped in the web server to the physical location /oracle/ucm/server/weblayout. Web Server Relative Root [/idc/]: Enter the name of the local mail server. The server will contact this system to deliver email. Company Mail Server [mail]: Enter the e-mail address for the system administrator. Administrator E-Mail Address [sysadmin@mail]: *** Web Server Address Many generated HTML pages refer to the web server you are using. The address specified here will be used when generating those pages. The address should include the host and domain name in most cases. If your webserver is running on a port other than 80, append a colon and the port number. Examples: www.company.com, ucm.company.com:90 Web Server HTTP Address [yekki]:yekki.cn.oracle.com:7777 Enter the name for this instance. This name should be unique across your entire enterprise. It may not contain characters other than letters, numbers, and underscores. Server Instance Name [idc]: Enter a short label for this instance. This label is used on web pages to identify this instance. It should be less than 12 characters long. Server Instance Label [idc]: Enter a long description for this instance. Server Description [Content Server idc]: Web Server         *1. Apache          2. Sun ONE          3. Configure manually Choice? Please select a database from the list below to use with the Content Server. Content Server Database         *1. Oracle          2. Microsoft SQL Server 2005          3. Microsoft SQL Server 2000          4. Sybase          5. DB2          6. Custom JDBC settings          7. Skip database configuration Choice? Manually configure JDBC settings for this database          1. yes         *2. no Choice? Oracle Server Hostname [localhost]: Oracle Listener Port Number [1521]: *** Database User ID The user name is used to log into the database used by the content server. Oracle User [user]:YEKKI_OCSERVER *** Database Password The password is used to log into the database used by the content server. Oracle Password []:oracle Oracle Instance Name [ORACLE]:orcl Configure the JVM to find the JDBC driver in a specific jar file          1. yes         *2. no Choice? The installer can attempt to create the database tables or you can manually create them. If you choose to manually create the tables, you should create them now. Attempt to create database tables          1. yes         *2. no Choice? Select components to install.          1. ContentFolios: Collect related items in folios          2. Folders_g: Organize content into hierarchical folders          3. LinkManager8: Hypertext link management support          4. OracleTextSearch: External Oracle 11g database as search indexer support          5. ThreadedDiscussions: Threaded discussion management Enter numbers separated by commas to toggle, 0 to unselect all, F to finish: 1,2,3,4,5         *1. ContentFolios: Collect related items in folios         *2. Folders_g: Organize content into hierarchical folders         *3. LinkManager8: Hypertext link management support         *4. OracleTextSearch: External Oracle 11g database as search indexer support         *5. ThreadedDiscussions: Threaded discussion management Enter numbers separated by commas to toggle, 0 to unselect all, F to finish: F Checking configuration. . . Configuration OK. Review install settings. . . Content Server Core Folder: /opt/oracle/ucm/server Java virtual machine: Sun Java 1.5.0_11 JDK Content Server Native Vault Folder: /opt/oracle/ucm/server/vault/ Content Server Weblayout Folder: /opt/oracle/ucm/server/weblayout/ Proxy authentication through another server: no Install admin server: yes Web Browser Path: /usr/bin/firefox Content Server System locale: English-US Content Server Port: 4444 Admin Server Port: 4440 Incoming connection address filter: *.*.*.* Web Server Relative Root: /idc/ Company Mail Server: mail Administrator E-Mail Address: sysadmin@mail Web Server HTTP Address: yekki.cn.oracle.com:7777 Server Instance Name: idc Server Instance Label: idc Server Description: Content Server idc Web Server: Apache Content Server Database: Oracle Manually configure JDBC settings for this database: false Oracle Server Hostname: localhost Oracle Listener Port Number: 1521 Oracle User: YEKKI_OCSERVER Oracle Password: 6GP1gBgzSyKa4JW10U8UqqPznr/lzkNn/Ojf6M8GJ8I= Oracle Instance Name: orcl Configure the JVM to find the JDBC driver in a specific jar file: false Attempt to create database tables: no Components: ContentFolios,Folders_g,LinkManager8,OracleTextSearch,ThreadedDiscussions Proceed with install         *1. Proceed          2. Change configuration          3. Recheck the configuration          4. Abort installation Choice? Finished install type Install with warnings at 4/2/10 12:32 AM. Run Scripts -bash-3.2$ ./wc_contentserverconfig.sh /opt/oracle/ucm/server /mnt/hgfs/SOFTWARE/ofm_ucm_generic_10.1.3.5.1_disk1_1of1/ContentServer/webcenter-conf Installing '/mnt/hgfs/SOFTWARE/ofm_ucm_generic_10.1.3.5.1_disk1_1of1/ContentServer/webcenter-conf/CS10gR35UpdateBundle.zip' Service 'DELETE_DOC' Extended Service 'DELETE_BYREV_REVISION' Extended Installing '/mnt/hgfs/SOFTWARE/ofm_ucm_generic_10.1.3.5.1_disk1_1of1/ContentServer/webcenter-conf/ContentAccess/ContentAccess-linux.zip' (internal)      04.02 00:40:38.019      main    updateDocMetaDefinitionV11: adding decimal column Installing '/opt/oracle/ucm/server/custom/CS10gR35UpdateBundle/extras/Folders_g.zip' Installing '/opt/oracle/ucm/server/custom/CS10gR35UpdateBundle/extras/FusionLibraries.zip' Installing '/opt/oracle/ucm/server/custom/CS10gR35UpdateBundle/extras/JpsUserProvider.zip' Installing '/mnt/hgfs/SOFTWARE/ofm_ucm_generic_10.1.3.5.1_disk1_1of1/ContentServer/webcenter-conf/WcConfigure.zip' Apr 2, 2010 12:41:24 AM oracle.security.jps.internal.core.util.JpsConfigUtil getPasswordCredential WARNING: A password credential is expected; instead found . Apr 2, 2010 12:41:24 AM oracle.security.jps.internal.idstore.util.IdentityStoreUtil getUnamePwdFromCredStore WARNING: The credential with map JPS and key ldap.credential does not exist. Apr 2, 2010 12:41:27 AM oracle.security.jps.internal.core.util.JpsConfigUtil getPasswordCredential WARNING: A password credential is expected; instead found . Apr 2, 2010 12:41:27 AM oracle.security.jps.internal.idstore.util.IdentityStoreUtil getUnamePwdFromCredStore WARNING: The credential with map JPS and key ldap.credential does not exist. Apr 2, 2010 12:41:28 AM oracle.security.jps.internal.core.util.JpsConfigUtil getPasswordCredential WARNING: A password credential is expected; instead found . Apr 2, 2010 12:41:28 AM oracle.security.jps.internal.idstore.util.IdentityStoreUtil getUnamePwdFromCredStore WARNING: The credential with map JPS and key ldap.credential does not exist. Restart Content Server to apply updates. Configuring Apache Web Server append the following lines at httpd.conf: include "/opt/oracle/ucm/server/data/users/apache22/apache.conf" Configuring the Identity Store( Optional ) 1.  Stop Oracle Content Server and the Admin Server 2.  Update the Oracle Content Server's JPS configuration file, jps-config.xml: a. add a service instance <serviceInstance provider="idstore.ldap.provider" name="idstore.oid"> <property name="subscriber.name" value="dc=cn,dc=oracle,dc=com"></property> <property name="idstore.type" value="OID"></property> <property name="security.principal.key" value="ldap.credential"></property> <property name="security.principal.alias" value="JPS"></property> <property name="ldap.url" value="ldap://yekki.cn.oracle.com:3060"></property> <extendedProperty> <name>user.search.bases</name> <values> <value>cn=users,dc=cn,dc=oracle,dc=com</value> </values> </extendedProperty> <extendedProperty> <name>group.search.bases</name> <values> <value>cn=groups,dc=cn,dc=oracle,dc=com</value> </values> </extendedProperty> <property name="username.attr" value="uid"></property> <property name="user.login.attr" value="uid"></property> <property name="groupname.attr" value="cn"></property> </serviceInstance> b. Ensure that the <jpsContext> entry in the jps-config.xml file refers to the new serviceInstance, that is, idstore.oid and not idstore.ldap: <jpsContext name="default"> <serviceInstanceRef ref="idstore.oid"/> 3. Run the new script to setup the credentials for idstore.oid in the credential store: cd CONTENT_SERVER_HOME/custom/FusionLibraries/tools -bash-3.2$ ./run_credtool.sh Buildfile: ./../tools/credtool.xml     [input] skipping input as property action has already been set.     [input] Alias: [JPS]     [input] Key: [ldap.credential]     [input] User Name: cn=orcladmin     [input] Password: welcome1     [input] JPS Config: [/opt/oracle/ucm/server/custom/FusionLibraries/tools/../../../config/jps-config.xml] manage-creds:      [echo] @@@ Help: run 'ant manage-creds' command to see the detailed usage      [java] Using default context in /opt/oracle/ucm/server/custom/FusionLibraries/tools/../../../config/jps-config.xml file for credential store.      [java] Credential store location : /opt/oracle/ucm/server/config      [java] Credential with map JPS key ldap.credential stored successfully!      [java]      [java]      [java]     Credential for map JPS and key ldap.credential is:      [java]             PasswordCredential name : cn=orcladmin      [java]             PasswordCredential password : welcome1 BUILD SUCCESSFUL Total time: 1 minute 27 seconds Testing 1. acces http://yekki.cn.oracle.com:7777/idc 2. login in with OID user, for example: orcladmin/welcome1 3. make sure your JpsUserProvider status is "good"

  Read the article

• SSIS - Access Denied with UNC paths - The file name is a device or contains invalid characters

  - by simonsabin

  I spent another day tearing my hair out yesterday trying to resolve an issue with SSIS packages runnning in SQLAgent (not got much left at the moment, maybe I should contact the SSIS team for a wig). My situation was that I am deploying packages to a development server, and to provide isolation I was running jobs with a proxy account that only had access to the development servers. Proxies are an awesome feature and mean that you should never have to "just run the job as sysadmin". The issue I was facing was that the job step was failing. The job step was a simple execution of the package.The following errors appeared in my log file. I always check the "Log step output in history" for a job step, this ensures you get all the output from the command that you run. I'll blog about this later. If looking at the output in sysdtslog90 then you will have an entry with datacode -1073573533 and error message File or directory "<filename>" represented by connection "<connection>" does not exist.  Not exactly helpful. If you get the output from the console then you will also get these errors. 0xC0202070 "The file name property is not valid. The file name is a device or contains invalid characters." 0xC001401E "specified in the connection was not valid." It appears this error is due to the use of a UNC path and the account runnnig the package not having access to all the folders in the path. Solution To solve this you need to ensure that the proxy account has access to ALL folders in the path you are accessing. To check this works, logon as the relevant proxy user, or run a command window as the specified user. Then try and do net use \\server\share and then do a dir for each folder in the path and check you have access. If these work and you still have the problem then you have some other problem, sorry. The following are posts on experts exchange that also discuss this,http://www.experts-exchange.com/Microsoft/Development/MS-SQL-Server/SSIS/Q_24056047.htmlhttp://www.experts-exchange.com/Microsoft/Development/MS-SQL-Server/SSIS/Q_23968903.html This blog had a post about it being a 64 bit issue. That definitely wasn't the issue for me as I was on a 32 bit server http://blogs.perkinsconsulting.com/post/64-bit-SQL-Server-2005-SSIS-and-UNC-paths-Part-2.aspx  

  Read the article

• Oracle UCM GET_SEARCH_RESULTS service with full text search

  - by Lyudmil Pelov

  Newly I was working on portlet which should be able to do full text search through the UCM documents and I was experimenting with the Ridc and also with the CIS API's. There are some ticks you may take care of, for example using quotes is a very spacial case and most of situations UCM will throw an exception if you not use them well. So during my tests I was able to develop one solution which works very well for me doing full text search and here is it: final IdcClientManager idcManager = new IdcClientManager(); final IdcClient idcClient = idcManager.createClient("idc://127.0.0.1:4444"); final IdcContext idcContext = new IdcContext("sysadmin"); final DataBinder binder = idcClient.createBinder(); // populate the binder with the parameters binder.putLocal ("IdcService", "GET_SEARCH_RESULTS"); binder.putLocal ("QueryText", "dDocFullText <substring> <qsch>"+yourSearchWordOrWords+"</qsch>");  binder.putLocal ("SearchEngineName", "databasefulltext"); binder.putLocal ("ResultCount", "20"); // execute the request ServiceResponse response = idcClient.sendRequest (idcContext, binder); // get the binder DataBinder serverBinder = response.getResponseAsBinder (); DataResultSet resultSet = serverBinder.getResultSet ("SearchResults"); // loop over the results for (DataObject dataObject : resultSet.getRows ()) { System.out.println ("Title is: " + dataObject.get ("dDocTitle")); System.out.println ("Author is: " + dataObject.get ("dDocAuthor")); }Nothing special so far except the line which declares the full text search. To be able to proceed with the full text search you have to use dDocFullText attribute inside the search query. The tag <substring> is the same as 'like'. Also you have to put your searching string or words in quotes which could be a problem sometime, so I used the tag <qsch>. Using this tag you can have quotes now inside you searching string without to break the code and get parsing exceptions.To be able to test the example, you do have to enable full text search inside UCM. To do this follow the steps for example from this blog here and then re-index the documents in UCM.There is also one very nice article about how to define UCM queries if want to replace the full text search with something more specific, you can read this article from Kyle's Blog here.

  Read the article

• Invalid SSH key error in juju when using it with MAAS

  - by Captain T

  This is the output of juju from a clean install with 2 nodes all running 12.04 juju bootstrap - finishes with no errors and allocates the machine to the user but still no joy after juju environment-destroy and rebuild with different users and different nodes. root@cloudcontrol:/storage# juju -v status 2012-06-07 11:19:47,602 DEBUG Initializing juju status runtime 2012-06-07 11:19:47,621 INFO Connecting to environment... 2012-06-07 11:19:47,905 DEBUG Connecting to environment using node-386077143930... 2012-06-07 11:19:47,906 DEBUG Spawning SSH process with remote_user="ubuntu" remote_host="node-386077143930" remote_port="2181" local_port="57004". The authenticity of host 'node-386077143930 (10.5.5.113)' can't be established. ECDSA key fingerprint is 31:94:89:62:69:83:24:23:5f:02:70:53:93:54:b1:c5. Are you sure you want to continue connecting (yes/no)? yes 2012-06-07 11:19:52,102 ERROR Invalid SSH key 2012-06-07 11:19:52,426:18541(0x7feb13b58700):ZOO_INFO@log_env@658: Client environment:zookeeper.version=zookeeper C client 3.3.5 2012-06-07 11:19:52,426:18541(0x7feb13b58700):ZOO_INFO@log_env@662: Client environment:host.name=cloudcontrol 2012-06-07 11:19:52,426:18541(0x7feb13b58700):ZOO_INFO@log_env@669: Client environment:os.name=Linux 2012-06-07 11:19:52,426:18541(0x7feb13b58700):ZOO_INFO@log_env@670: Client environment:os.arch=3.2.0-23-generic 2012-06-07 11:19:52,426:18541(0x7feb13b58700):ZOO_INFO@log_env@671: Client environment:os.version=#36-Ubuntu SMP Tue Apr 10 20:39:51 UTC 2012 2012-06-07 11:19:52,428:18541(0x7feb13b58700):ZOO_INFO@log_env@679: Client environment:user.name=sysadmin 2012-06-07 11:19:52,428:18541(0x7feb13b58700):ZOO_INFO@log_env@687: Client environment:user.home=/root 2012-06-07 11:19:52,428:18541(0x7feb13b58700):ZOO_INFO@log_env@699: Client environment:user.dir=/storage 2012-06-07 11:19:52,428:18541(0x7feb13b58700):ZOO_INFO@zookeeper_init@727: Initiating client connection, host=localhost:57004 sessionTimeout=10000 watcher=0x7feb11afc6b0 sessionId=0 sessionPasswd=<null> context=0x2dc7d20 flags=0 2012-06-07 11:19:52,429:18541(0x7feb0e856700):ZOO_ERROR@handle_socket_error_msg@1579: Socket [127.0.0.1:57004] zk retcode=-4, errno=111(Connection refused): server refused to accept the client 2012-06-07 11:19:55,765:18541(0x7feb0e856700):ZOO_ERROR@handle_socket_error_msg@1579: Socket [127.0.0.1:57004] zk retcode=-4, errno=111(Connection refused): server refused to accept the client I have tried numerous ways of creating the keys with ssh-keygen -t rsa -b 2048, ssh-keygen -t rsa, ssh-keygen, and i have tried adding those to MAAS web config page, but always get the same result. I have added the appropriate public key afterwards to the ~/.ssh/authorized_keys I can also ssh to the node, but as I have not been asked to give it a user name or password or set up any sort of account, I cannot manually ssh into the node. The setup of the node is all handled by maas server. It seems like a simple error of looking at the wrong key or looking in the wrong places, only other suggestions I can find are to destroy the environment and rebuild (but that didn't work umpteen times now) or leave it to build the instance once the node has powered up, but I have left for a few hours, and left overnight to build with no luck.

  Read the article

• Maintaining Revision Levels

  - by kyle.hatlestad

  A question that came up on an earlier blog post was how to limit the number of revisions on a piece of content. UCM does not inherently enforce any sort of limit on how many revisions you can have. It's unlimited. In some cases, there may be content that goes through lots of changes, but there just simply isn't a need to keep all of its revisions around. Deleting those revisions through the content information screen can be very cumbersome. And going through the Repository Manager applet can take time as well to filter and find the revisions to get rid of. But there is an easier way through the Archiver. The Export Query criteria in Archiver includes a very handy field called 'Revision Rank'. With revision labels, they typically go up as new revisions come in (e.g. 1, 2, 3, 4, etc...). But you can't really use this field to tell it to keep the top 5 revisions. Those top 5 revision numbers are always going up. But revision rank goes the opposite direction. The very latest revision is always 0. The previous revision to that is 1. Previous revision to that is 2. And so on and so forth. With revision rank, you can set your query to look for any Revision Rank greater or equal to 5. Now as older revisions move down the line, their revision rank gets higher and higher until they reach that threshold. Then when you run that archive export, you can choose to delete and remove those revisions. Running that export in Archiver is normally a manual process. But with Idc Command, you can script the process and have it run automatically from the server. Idc Command is a utility that allows you to run any of the content server services via the command line. You basically feed it a text file with the services and parameters defined along with the user to run it as. The Idc Command executable is located within the \bin\ directory: $ ./IdcCommand -f DeleteOlderRevisions.txt -u sysadmin -l delete_revisions.log In this example, our IdcCommand file to run the export and do the deletions would look like: IdcService=EXPORT_ARCHIVE aArchiveName=DeleteOlderRevisions aDoDelete=1 IDC_Name=idc dataSource=RevisionIDs <<EOD>> You can then use automated scheduling routines in the OS to run the command and command file at the frequency needed. Remember that you are deleting the revisions from within UCM, but they are still getting placed within the archive. So you will need to delete those batches to have them fully removed (or re-import if you need to recover them). For more information about Idc Command, you can find that in the Idc Command Reference Guide.

  Read the article

• Favorite moments of JavaOne

  - by Tori Wieldt

  There are so many events and sessions to attend at JavaOne, it's unfair to ask people to choose just one thing they liked, but here are some favorite moments: I loved meeting many open source contributors and friends I have not met in person before and seeing that projects like e.g. Hudson are alive and kicking and have a great future ahead of them. -Manfred Moser My "The Problem with Women" session. It had LOADS of interactivity from the audience, who really helped to make that session.  I came out if it with a real sense of optimism - we love our jobs, we love what we do, and we should be proud of telling everyone about it to attract different talent into the industry. (Read her blog JavaOne: The Problem With Women - A Technical Approach for details.) -Trish Gee My kudos to Oracle for making the presentation materials quickly available to the public. Some of them were already available during JavaOne. Lots of slide decks are already there, and in some cases you may even find the video recordings too. Go to http://www.oracle.com/javaone and select JavaOne Technical Sessions.  -Yakov Fain I loved that not only was James Gosling present at the Community Keynote (which felt more like the keynotes of old times [big space, big screens, fun and tech]) but he was also found wandering the halls of the Hilton the day prior. Bring back James! Add back the toys section in the Community Keynote. Let the t-shirt tossing begin anew. These are "small" things that really fire up the community. -Andres Almiray Seeing James Gosling at JavaOne was a real shot in the arm for Java.  He needs to be there every year. -Frank Greco +42 on having James and the T-shirt tossing. -Stephan Janssen The session "Integrate Java with Robots, Home Automation, Musical Instruments, and Kinect." Fabiane Nardon explained connecting Jenkins to jHome to a truck horn placed in their sysadmin's bedroom. She dubbed it "extreme feedback."  -Tori Wieldt The User Group Forum [on Sunday] was a success! Congratulations Bruno Souza and John Yeary and everybody that were involved. I believe it really helps to increase community participation! There were lots of interesting talks, and great discussion with JUG leaders and members. Thank you Oracle for supporting that! -Yara Senger What was your favorite moment? Please comment! 

  Read the article

• Keep taking the tablets

  - by Roger Hart

  A guest editorial for the SimpleTalk newsletter. So why would Red Gate build an Ipad Game? Is it just because tablet devices are exciting and cool? Ok, maybe a little. Mostly, it was seeing that the best existing tablet and smartphone apps do simple, intuitive things, using simple intuitive interfaces to solve single problems. That's pretty close to what we call our own "intuitively simple" approach to software. Tablets and mobile could be fantastic for us, if we can identify those problems that a tablet device can solve. How do you create THE next tool for a completely new technology? We're glad we don't face that problem every day, but it's pretty exciting when we do. We figure we should learn by doing. We created "MobileFoo" (a Red Gate Company) , we picked up some shiny Apple tech, and got to grips with Objective C, and life in the App Store ecosystem. The result so far is an iPad game: Stacks and Heaps It's Rob and Marine's spin on Snakes and Ladders. Instead of snakes we have unhandled exceptions, a blue screen of death, and other hazards. We wanted something compellingly geeky on mobile, and we're pretty sure we've got it. It's trudging through App Store approval as we speak. but if you want to get an idea of what it is like to switch from .net to Objective C, take a look at Rob's post Android and iOS is quite a culture-change for Windows developers. So to give them a feel for the problems real users might have, we needed some real users - we offered our colleagues subsidised tablets. The only conditions were that they get used at work, and we get the feedback. Seeing tablets around the office is starting to give us some data points: Is typing the bottleneck? Will tablets ever cut it as text-entry devices, and could we fix it? Is mobile working held up by the pain of connecting to work LANs? How about security? Multi-tasking will let tablets do more. They're small, easy to use, almost instant to switch on, and connect by Wi Fi. There's plenty on that list to make a sysadmin twitchy. We'll find out as people spend more time working with these devices, and we'd love to hear what you think about tablet devices too. (comments are filtered, what with the spam)

  Read the article

• A Slice of Raspberry Pi

  - by Phil Factor

  Guest editorial for the ITPro/SysAdmin newsletter The Raspberry Pi Foundation has done a superb design job on their new $35 network-enabled Linux computer. This tiny machine, incorporating an ARM processor on a Broadcom BCM2835 multimedia chip, aims to put the fun back into learning computing. The public response has been overwhelmingly positive.Note that aim: "…to put the fun back". Education in Information Technology is in dire straits. It always has been, but seems to have deteriorated further still, even in the face of improved provision of equipment.In many countries, the government controls the curriculum. It predicted a shortage in office-based IT skills, and so geared the ICT curriculum toward mind-numbing training in word-processing and spreadsheet skills. Instead, the shortage has turned out to be in people with an engineering-mindset, who can solve problems with whatever technologies are available and learn new techniques quickly, in a rapidly-changing field.In retrospect, the assumption that specific training was required rather than an education was an idiotic response to the arrival of mainstream information technology. As a result, ICT became a disaster area, which discouraged a generation of youngsters from a career in IT, and thereby led directly to the shortage of people with the skills that are required to exploit the potential of Information Technology..Raspberry Pi aims to reverse the trend. This is a rig that is geared to fast graphics in high resolution. It is no toy. It should be a superb games machine. However, the use of Fedora, Debian, or Arch Linux ARM shows the more serious educational intent behind the Foundation's work. It looks like it will even do some office work too!So, get hold of any power supply that provides a 5VDC source at the required 700mA; an old Blackberry charger will do or, alternatively, it will run off four AA cells. You'll need a USB hub to support the mouse and keyboard, and maybe a hard drive. You'll want a DVI monitor (with audio out) or TV (sound and video). You'll also need to be able to cope with wired Ethernet 10/100, if you want networking.With this lot assembled, stick the paraphernalia on the back of the HDTV with Blu Tack, get a nice keyboard, and you have a classy Linux-based home computer. The major cost is in the T.V and the keyboard. If you're not already writing software for this platform, then maybe, at a time when some countries are talking of orders in the millions, you should consider it.

  Read the article

• Failing report subscriptions

  - by DavidWimbush

  We had an interesting problem while I was on holiday. (Why doesn't this stuff ever happen when I'm there?) The sysadmin upgraded our Exchange server to Exchange 2010 and everone's subscriptions stopped. My Subscriptions showed an error message saying that the email address of one of the recipients is invalid. When you create a subscription, Reporting puts your Windows user name into the To field and most users have no permissions to edit it. By default, Reporting leaves it up to exchange to resolve that into an email address. This only works if Exchange is set up to translate aliases or 'short names' into email addresses. It turns out this leaves Exchange open to being used as a relay so it is disabled out of the box. You now have three options: Open up Exchange. That would be bad. Give all Reporting users the ability to edit the To field in a subscription. a) They shouldn't have to, it should just work. b) They don't really have any business subscribing anyone but themselves. Fix the report server to add the domain. This looks like the right choice and it works for us. See below for details. Pre-requisites: A single email domain name. A clear relationship between the Windows user name and the email address. eg. If the user name is joebloggs, then joebloggs@domainname needs to be the email address or an alias of it. Warning: Saving changes to the rsreportserver.config file will restart the Report Server service which effectively takes Reporting down for around 30 seconds. Time your action accordingly. Edit the file rsreportserver.config (most probably in the folder ..\Program Files[ (x86)]\Microsoft SQL Server\MSRS10_50[.instancename]\Reporting Services\ReportServer). There's a setting called DefaultHostName which is empty by default. Enter your email domain name without the leading '@'. Save the file. This domain name will be appended to any destination addresses that don't have a domain name of their own.

  Read the article

• Is it a bug or a task when something doesn't work, yet, in development process

  - by Patkos Csaba

  We usually have this dilemma in our team. Sometimes, in order to implement a task or a story we find out that the system must be in a specific state. For example, a specific system configuration has to be made beforehand. The task / story can be completed and it is working as specified on it with the proper configuration in place. Note that the configuration is not directly related with the task. Next, we have to create a new ... ??? ... something for the process of generating that configuration file. This is where the problems appear. Some say that it is a bug others say it is a task or an extra feature. So, where is the limit between bugs and tasks in the development phase? Should we even consider something a bug if all the tasks are working as stated in their definitions? Can a thing be considered a bug because one compares it to the current (unstable) state of the system? Short example: A feature requires configuring a communication service for a specific operation. In the process of the implementation the team discovers that the service requires the hostnames of the pears to be resolvable to an IP address. The team adds the hostnames to the DNS server (or hosts files) and continues implementing the required feature. After the initial feature is working, a question is risen. Should the sysadmin configure the DNS or hosts file or should our application do it automatically? An automatic solution is possible. So a decision is made to implement it. ... here start the discussions ... is this a bug or an extra feature / task? PS: I know that I mixed feature / task / story in the question. It is intentional. I am interested in separating bugs from the rest. Doesn't matter what the rest means in a particular case.

  Read the article

• Are You an IT Geek? Why Not Write for How-To Geek?

  - by The Geek

  Are you a geek in the IT field that wants to share your skills with the world? We’re looking for an experienced Sysadmin / IT Admin / Webmaster geek with writing skills that wants to join our team on a part-time basis. Please apply if you have the following qualities: You must be a geek at heart, willing to try and make the boring world of IT sound glamorous and sexy. If that’s not possible, at least be willing to share your wisdom and skills to help other IT geeks save time and become better at what they do. You must be able to write articles that are easy to understand. Either Windows or Linux writers are welcome to apply. You must be able to follow our style guide. You must be creative. You must generate ideas for articles on your own, and take suggestions like a pro. You’re ambitious, looking to build your skills and your name, and are prepared to work hard. If you aren’t willing to work hard, put some dedication and pride into your work, or aren’t really interested in the topic, this job might not be for you. We’re looking for serious individuals that want to grow with us, and as we grow, you’ll grow as well. How To Apply If you think this job is a good fit for you, send an email to [email protected] and include some background information about yourself, why you’d be a good fit, some topic areas you are familiar with, and hopefully some examples of your work. Bonus points if you have a ninja costume and a keyboard strapped to your back. Similar Articles Productive Geek Tips What Topics Should The How-To Geek Write About?Got Awesome Skills? Why Not Write for How-To Geek?Got Awesome Geek Skills? The How-To Geek is Looking for WritersAbout the GeekThe How-To Geek Bounty Program TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 QuicklyCode Provides Cheatsheets & Other Programming Stuff Download Free MP3s from Amazon Awe inspiring, inter-galactic theme (Win 7) Case Study – How to Optimize Popular Wordpress Sites Restore Hidden Updates in Windows 7 & Vista Iceland an Insurance Job?

  Read the article

• Hadoop, NOSQL, and the Relational Model

  - by Phil Factor

  (Guest Editorial for the IT Pro/SysAdmin Newsletter)Whereas Relational Databases fit the world of commerce like a glove, it is useless to pretend that they are a perfect fit for all human endeavours. Although, with SQL Server, we’ve made great strides with indexing text, in processing spatial data and processing markup, there is still a problem in dealing efficiently with large volumes of ephemeral semi-structured data. Key-value stores such as Cassandra, Project Voldemort, and Riak are of great value for ephemeral data, and seem of equal value as a data-feed that provides aggregations to an RDBMS. However, the Document databases such as MongoDB and CouchDB are ideal for semi-structured data for which no fixed schema exists; analytics and logging are obvious examples. NoSQL products, such as MongoDB, tackle the semi-structured data problem with panache. MongoDB is designed with a simple document-oriented data model that scales horizontally across multiple servers. It doesn’t impose a schema, and relies on the application to enforce the data structure. This is another take on the old ‘EAV’ problem (where you don’t know in advance all the attributes of a particular entity) It uses a clever replica set design that allows automatic failover, and uses journaling for data durability. It allows indexing and ad-hoc querying. However, for SQL Server users, the obvious choice for handling semi-structured data is Apache Hadoop. There will soon be an ODBC Driver for Apache Hive .and an Add-in for Excel. Additionally, there are now two Hadoop-based connectors for SQL Server; the Apache Hadoop connector for SQL Server 2008 R2, and the SQL Server Parallel Data Warehouse (PDW) connector. We can connect to Hadoop process the semi-structured data and then store it in SQL Server. For one steeped in the culture of Relational SQL Databases, I might be expected to throw up my hands in the air in a gesture of contempt for a technology that was, judging by the overblown journalism on the subject, about to make my own profession as archaic as the Saggar makers bottom knocker (a potter’s assistant who helped the saggar maker to make the bottom of the saggar by placing clay in a metal hoop and bashing it). However, on the contrary, I find that I'm delighted with the advances made by the NoSQL databases in the past few years. Having the flow of ideas from the NoSQL providers will knock any trace of complacency out of the providers of Relational Databases and inspire them into back-fitting some features, such as horizontal scaling, with sharding and automatic failover into SQL-based RDBMSs. It will do the breed a power of good to benefit from all this lateral thinking.

  Read the article

• Oracle Linux Hands-on Lab from your Home? Yes You Can Do That!

  - by Zeynep Koch

  We're taking the very popular OTN Sysadmin Days and going virtual! We have two days to choose from: Americas - Tuesday January 15th, 2013 9:00 a.m – 1:00 p.m. PT / 12:00 p.m. – 4:00 p.m. ET / 1:00 p.m. - 5:00 p.m. BRT EMEA -  Tuesday January 29th, 2013 - 9:00 a.m – 13:00 p.m GMT / 10:00 a.m – 14:00 p,m CET / 12:00 p.m – 16:00 p.m AST / 13:00 p.m – 17:00 p,m MSK / 14:30 p.m – 18:30 p.m IST You'll be able to perform real-world tasks with Oracle Linux and if you have questions you can ask for help from the Oracle experts through chat window. There's one caveat: you'll have to do a little homework ahead of time. Load the virtual images onto your laptop, find the instructions, and make sure everything is working properly. This wiki https://wikis.oracle.com/display/virtualsysadminday/Home explains what you need to do. If you have questions, ask them as comments to the wiki:https://wikis.oracle.com/display/virtualsysadminday/Home.  Oracle Linux Track  1. Oracle Linux Technology Overview - In this session we will go over the latest Oracle Linux features including tools for Linux administration such as the Unbreakable Linux Network (ULN) and public yum. We will also show you a demo of Ksplice zero downtime kernel updates, only available to Oracle Linux customers. You will see how easy it is to switch from Red Hat support to Oracle Linux support by using ULN. Last but not least, we’ll introduce the 3 hands-on labs that will follow this session in the Linux track. 2. HOL: Package Management -  In this lab session you will use the package management on Oracle Linux using RPM and yum. Some of the tasks that you will experience include listing installed packages, obtaining additional information about packages, searching for packages and installing/updating them as well as verifying package integrity and removing software. We’ll also review Linux services and run levels, how to start and stop them, checking the status of a particular service and enabling a service to be started automatically at system boot. 3. HOL: Storage Management - In this hands-on lab session, you will learn about storage management with LVM2, the Linux Logical Volume Manager, preparing block devices, creating physical and logical volumes, creating file systems on top of logical volumes, and resizing file systems dynamically. You will also practice setting up software RAID devices, configuring encrypted block devices.Btrfs File System - In this hands-on lab session, we will introduce you to Btrfs file system. You will be able to create and mount a Btrfs file system and learn to setup a mirrored/striped file system across multiple block devices. You’ll also learn how to add and remove block devices, and create file system snapshots. Register for this FREE event.

  Read the article

• SMTP POP3 & PST. Acronyms from Hades.

  - by mikef

  A busy SysAdmin will occasionally have reason to curse SMTP. It is, certainly, one of the strangest events in the history of IT that such a deeply flawed system, designed originally purely for campus use, should have reached its current dominant position. The explanation was that it was the first open-standard email system, so SMTP/POP3 became the internet standard. We are, in consequence, dogged with a system with security weaknesses so extreme that messages are sent in plain text and you have no real assurance as to who the message came from anyway (SMTP-AUTH hasn't really caught on). Even without the security issues, the use of SMTP in an office environment provides a management nightmare to all commercial users responsible for complying with all regulations that control the conduct of business: such as tracking, retaining, and recording company documents. SMTP mail developed from various Unix-based systems designed for campus use that took the mail analogy so literally that mail messages were actually delivered to the users, using a 'store and forward' mechanism. This meant that, from the start, the end user had to store, manage and delete messages. This is a problem that has passed through all the releases of MS Outlook: It has to be able to manage mail locally in the dreaded PST file. As a stand-alone system, Outlook is flawed by its neglect of any means of automatic backup. Previous Outlook PST files actually blew up without warning when they reached the 2 Gig limit and became corrupted and inaccessible, leading to a thriving industry of 3rd party tools to clear up the mess. Microsoft Exchange is, of course, a server-based system. Emails are less likely to be lost in such a system if it is properly run. However, there is nothing to stop users from using local PSTs as well. There is the additional temptation to load emails into mobile devices, or USB keys for off-line working. The result is that the System Administrator is faced by a complex hybrid system where backups have to be taken from Servers, and PCs scattered around the network, where duplication of emails causes storage issues, and document retention policies become impossible to manage. If one adds to that the complexity of mobile phone email readers and mail synchronization, the problem is daunting. It is hardly surprising that the mood darkens when SysAdmins meet and discuss PST Hell. If you were promoted to the task of tormenting the souls of the damned in Hades, what aspects of the management of Outlook would you find most useful for your task? I'd love to hear from you. Cheers, Michael

  Read the article

• Capture a Query Executed By An Application Or User Against a SQL Server Database in Less Than a Minute

  - by Compudicted

  At times a Database Administrator, or even a developer is required to wear a spy’s hat. This necessity oftentimes is dictated by a need to take a glimpse into a black-box application for reasons varying from a performance issue to an unauthorized access to data or resources, or as in my most recent case, a closed source custom application that was abandoned by a deserted contractor without source code. It may not be news or unknown to most IT people that SQL Server has always provided means of back-door access to everything connecting to its database. This indispensible tool is SQL Server Profiler. This “gem” is always quietly sitting in the Start – Programs – SQL Server <product version> – Performance Tools folder (yes, it is for performance analysis mostly, but not limited to) ready to help you! So, to the action, let’s start it up. Once ready click on the File – New Trace button, or using Ctrl-N with your keyboard. The standard connection dialog you have seen in SSMS comes up where you connect the standard way: One side note here, you will be able to connect only if your account belongs to the sysadmin or alter trace fixed server role. Upon a successful connection you must be able to see this initial dialog: At this stage I will give a hint: you will have a wide variety of predefined templates: But to shorten your time to results you would need to opt for using the TSQL_Grouped template. Now you need to set it up. In some cases, you will know the principal’s login name (account) that needs to be monitored in advance, and in some (like in mine), you will not. But it is VERY helpful to monitor just a particular account to minimize the amount of results returned. So if you know it you can already go to the Event Section tab, then click the Column Filters button which would bring a dialog below where you key in the account being monitored without any mask (or whildcard):  If you do not know the principal name then you will need to poke around and look around for things like a config file where (typically!) the connection string is fully exposed. That was the case in my situation, an application had an app.config (XML) file with the connection string in it not encrypted: This made my endeavor very easy. So after I entered the account to monitor I clicked on Run button and also started my black-box application. Voilà, in a under a minute of time I had the SQL statement captured:

  Read the article

• Is SecureShellz bot a virus? How does it work?

  - by ProGNOMmers

  I'm using a development server in which I found this in the crontab: [...] * * * * * /dev/shm/tmp/.rnd >/dev/null 2>&1 @weekly wget http://stablehost.us/bots/regular.bot -O /dev/shm/tmp/.rnd;chmod +x /dev/shm/tmp/.rnd;/dev/shm/tmp/.rnd [...] http://stablehost.us/bots/regular.bot contents are: #!/bin/sh if [ $(whoami) = "root" ]; then echo y|yum install perl-libwww-perl perl-IO-Socket-SSL openssl-devel zlib1g-dev gcc make echo y|apt-get install libwww-perl apt-get install libio-socket-ssl-perl openssl-devel zlib1g-dev gcc make pkg_add -r wget;pkg_add -r perl;pkg_add -r gcc wget -q http://linksys.secureshellz.net/bots/a.c -O a.c;gcc -o a a.c;mv a /lib/xpath.so;chmod +x /lib/xpath.so;/lib/xpath.so;rm -rf a.c wget -q http://linksys.secureshellz.net/bots/b -O /lib/xpath.so.1;chmod +x /lib/xpath.so.1;/lib/xpath.so.1 wget -q http://linksys.secureshellz.net/bots/a -O /lib/xpath.so.2;chmod +x /lib/xpath.so.2;/lib/xpath.so.2 exit 1 fi wget -q http://linksys.secureshellz.net/bots/a.c -O a.c;gcc -o .php a.c;rm -rf a.c;chmod +x .php; ./.php wget -q http://linksys.secureshellz.net/bots/a -O .phpa;chmod +x .phpa; ./.phpa wget -q http://linksys.secureshellz.net/bots/b -O .php_ ;chmod +x .php_;./.php_ I cannot contact the sysadmin for various reasons, so I cannot ask infos about this to him. It seems to me this script downloads some remote C source codes and binaries, compile them and execute them. I am a web developer, so I am not an expert about C language, but watching at the downloaded files it seems to me a bot injected in the cron of the server. Can you give me more infos about what this code does? About its working, its purposes?

  Read the article

• Excel techniques for perfmon csv log file analysis

  - by Aszurom

  I have perfmon running against several servers, where I'm outputting to a .csv file data like CPU %time, memory bytes free, hard disk I/O metrics like s/write and writes/s. The ones graphing the SQL servers are also collecting SQL stats. The web servers are collecting .Net relevant stuff. I am aware of PAL, and used it as a template of what data to capture based on server type actually. I just don't think the output it generates is detailed or flexible enough - but it does a pretty remarkable job of parsing logs and making graphs. I'm borderline incompetent with Excel, so I'm hoping to be directed to some knowledge of how to take a perfmon output .csv and mine it in Excel to produce some numbers that are meaningful to me as a sysadmin. I could of course just pick a range of data and assemble a graph out of that and look for spikes and trends, but I'm convinced there is some technique to this that makes it more manageable than looking at a monsterous spreadsheet of numbers and trying to make graphs of it. Plus, it's pretty time consuming and not something I can do as a "take a glance at the servers" sort of routine. I'm graphing CPU, disk use, network b/sec, etc. in Cacti as well, which is nice for seeing big trends. The problem is that it is 5 minute averages, so a server could have a problem but it's intermittent and washes out in a 5 min average. What do you do with perfmon data that I could learn from?

  Read the article

• Apache+LDAP auth on Ubuntu says "Can't contact LDAP server" while ldapsearch is perfect

  - by tw79

  Hi Gurus, I'm migrating from an existing apache+LDAP+mysql+php server to a new hardware platform. Old server is running Debian Lenny, which I have no config documentation available (was done by previous sysadmin); New server is running Ubuntu 10.04.2 LTS 32bit. After installing Apache and configured LDAP client on the new server, ldapsearch to the LDAP master (another dedicated server) returns results just fine. However, when using apache with https, logs complain that "Can't contact LDAP server". I'm authenticating using ldaps and can confirm that 636 port is open on the LDAP master. I can't understand why apache would fail while regular ldapsearch is working! Below is part of the virtualhost config: <Directory /> Options FollowSymLinks AllowOverride None #AuthLDAPEnabled on AuthType Basic AuthBasicProvider ldap AuthName "Private" AuthLDAPURL ldaps://master.ldap.organisation.com:636/ou=people,dc=organisation,dc=com?uid AuthzLDAPAuthoritative off require valid-user AddType application/x-httpd-php .php .phtml <IfModule mod_php4.c> php_flag magic_quotes_gpc Off php_flag track_vars On php_value include_path . </IfModule> </Directory> Any help/suggestion is very much appreciated!

  Read the article

• Where can I ask questions that aren't IT questions?

  - by Adam Davis

  Thank you for your confidence in our abilities But have you read this? FAQ We get a lot of interesting technical questions on here, but Server Fault is meant to be first and foremost a resource for system administrators and IT professionals. In other words, Server Fault isn't meant to cater to every computer problem - just those that only exist in or can best be solved in the IT and sysadmin domain Yes, someone here might be able to help you, but you'll find that other forums more focused on your topic can give you a much better answer than a bunch of IT professionals. It's likely that your question will be downvoted, closed, and in some cases marked "offensive." It's not that we hate you, it's just that we like to keep our corn pops separate from our cocoa puffs. In that vein, here are a bunch of other forums where you can get help: (This list contains the top two forums for each category as voted for below.) Programming Stackoverflow Consumer Level Computer Hardware Ars Technica OpenForum Tom's Hardware Forums Computer Software Anandtech Forum Web Design/Hosting/CMS SitePoint Forums Web Hosting Talk Math, Science, Engineering Physics Forums PlanetMath Other/General Ask Metafilter Google Search Mahalo Answers Check out the answers below for even more suggestions! What forums can people go to to ask the questions that are off topic here? Please list only ONE forum per answer so votes can bring the best forums to the top. Return to FAQ Index

  Read the article

• Scheduled tasks fail to start unless I'm logged in to the server

  - by Chuck

  Tasks need to open a CMD window and pass net use commands, then do a DIR command, pipping the output to a file on the server. Log in as either me (Sysadmin) or with one of the system accounts and task will only run if I'm physically logged into the server. Run as batch file is set in security properties for both users (me and service account), security is granted to all directories, etc. It almost acts like a scheduled task, since it is not physically connected to a display can't create a CMD window and pass the WinID so the command can be sent. I'm guessing. Anyone know of a document that explains how the server handles initiation of a window if done via scheduled task and no attached user is associated with the task? If I log onto the box and run the scheduled tasks they run fine, but produce no errors or event log entries and then just show that it ran successfully and sets the next run time. Have tried both with the run if logged in checkbox on and off and makes no difference. Other tasks work fine, except that they are acting on local drives with no display writing or updating taking place, so I'm guessing the system either can't instantiate a window if no display is connected to a logged on user, or it can't establish a point if it is trying to create a virtual screen. You'd think it is just creating a memory map and then mapping it to a device to display, but that doesn't seem to be the case, but I can find no documentation on how the system handles a scheduled task and how to invoke a fake or virtual screen that it could write to so it appears that a user was connected. Thanks This is driving me nuts and I've tried everything I can think of as well as our network boys ideas and nothing seems to work.

  Read the article

• Validating signature trust with gpg?

  - by larsks

  We would like to use gpg signatures to verify some aspects of our system configuration management tools. Additionally, we would like to use a "trust" model where individual sysadmin keys are signed with a master signing key, and then our systems trust that master key (and use the "web of trust" to validate signatures by our sysadmins). This gives us a lot of flexibility, such as the ability to easily revoke the trust on a key when someone leaves, but we've run into a problem. While the gpg command will tell you if a key is untrusted, it doesn't appear to return an exit code indicating this fact. For example: # gpg -v < foo.asc Version: GnuPG v1.4.11 (GNU/Linux) gpg: armor header: gpg: original file name='' this is a test gpg: Signature made Fri 22 Jul 2011 11:34:02 AM EDT using RSA key ID ABCD00B0 gpg: using PGP trust model gpg: Good signature from "Testing Key <[email protected]>" gpg: WARNING: This key is not certified with a trusted signature! gpg: There is no indication that the signature belongs to the owner. Primary key fingerprint: ABCD 1234 0527 9D0C 3C4A CAFE BABE DEAD BEEF 00B0 gpg: binary signature, digest algorithm SHA1 The part we care about is this: gpg: WARNING: This key is not certified with a trusted signature! gpg: There is no indication that the signature belongs to the owner. The exit code returned by gpg in this case is 0, despite the trust failure: # echo $? 0 How do we get gpg to fail in the event that something is signed with an untrusted signature? I've seen some suggestions that the gpgv command will return a proper exit code, but unfortunately gpgv doesn't know how to fetch keys from keyservers. I guess we can parse the status output (using --status-fd) from gpg, but is there a better way?

  Read the article

• SSH public key authentication -- always require users to generate their own keypair?

  - by schinazi

  I was working with a partner today that I needed to upload files to my server using scp. I have passwords turned off in the server's SSH configuration, so I wanted them to use public key authentication. I generated the keypair for them on the server and gave them the private key and put the public key in the appropriate authorized_keys file. After a bunch of problems with them setting up their job, they finally got a more experienced sysadmin involved on their end, and he scolded me for handling the key generation this way. He said that by giving them a private key generated on my system, I had enabled them to do a brute-force attack against other keys generated on the same server. I even asked him "so if I have an account on a server, and I can log in with a password but I want to automate something and I generate a keypair on that system, does that then give me an attack vector for brute forcing other users' keys?" and he said yes. I've never heard of this, is it true? Can anyone point me to a discussion of this attack? Thanks in advance.

  Read the article

• Can’t connect to SQL Server 2008 - looks like Shared Memory problem

  - by user38556

  I am unable to connect to my local instance of SQL Server 2008 Express using SQL Server Management Studio. I believe the problem is related to a change I made to the connection protocols. Before the error occurred, I had Shared Memory enabled and Named Pipes and TCP/IP disabled. I then enabled both Named Pipes and TCP/IP, and this is when I started experiencing the problem. When I try to connect to the server with SSMS (with either my SQL server sysadmin login or with windows authentication), I get the following error message: A connection was successfully established with the server, but then an error occurred during the login process. (provider: Named Pipes Provider, error: 0 - No process is on the other end of the pipe.) (Microsoft SQL Server, Error: 233) Why is it returning a Named Pipes error? Why would it not just use Shared Memory, as this has a higher priority order in the list of connection protocols? It seems like it is not listening on Shared Memory for some reason? When I set Named Pipes to enabled and try to connect, I get the same error message. My windows account is does not have administrator priviliges on my computer - perhaps this is making a difference in some way (as some of the discussions in this post about an "SuperSocketNetLib\Lpc" registry key seems to suggest). I have tried restarting the SQL Server service, by the way, and also tried to get someone to log onto the machine with an admin account to restart the SQL Server service. Still no luck.

  Read the article

< Previous Page | 17 18 19 20 21 22 23 24 25 26 27 28  | Next Page >