Search Results

Search found 1889 results on 76 pages for 'paul hammant'.

Page 21/76 | < Previous Page | 17 18 19 20 21 22 23 24 25 26 27 28  | Next Page >

  • Ensuring a repeatable directory ordering in linux

    - by Paul Biggar
    I run a hosted continuous integration company, and we run our customers' code on Linux. Each time we run the code, we run it in a separate virtual machine. A frequent problem that arises is that a customer's tests will sometimes fail because of the directory ordering of their code checked out on the VM. Let me go into more detail. On OSX, the HFS+ file system ensures that directories are always traversed in the same order. Programmers who use OSX assume that if it works on their machine, it must work everywhere. But it often doesn't work on Linux, because linux file systems do not offer ordering guarantees when traversing directories. As an example, consider there are 2 files, a.rb, b.rb. a.rb defines MyObject, and b.rb uses MyObject. If a.rb is loaded first, everything will work. If b.rb is loaded first, it will try to access an undefined variable MyObject, and fail. But worse than this, is that it doesn't always just fail. Because the file system ordering on Linux is not ordered, it will be a different order on different machines. This is worse because sometimes the tests pass, and sometimes they fail. This is the worst possible result. So my question is, is there a way to make file system ordering repeatable. Some flag to ext4 perhaps, that says it will always traverse directories in some order? Or maybe a different file system that has this guarantee?

    Read the article

  • 3 monitors + a TV on a single card with Eyefinity?

    - by Paul Accisano
    Greetings all, Right now I have a fairly standard video card with 2 DVI ports, one powering my single monitor and another powering my HDTV (with a DVI-to-HDMI cable), which are in separate rooms. I never need to have my monitor and TV active at the same time. I'm looking into a possible computer upgrade. I'd like to know if the following situation is possible. I want three monitors on my desk powered by a single card, which I hear these new Eyefinity cards are capable of. But, I also want my TV hooked up. At any given time, I would want either my three monitors active or my TV active, never both at once. So it seems to me it might be possible to do this all a single 3-port card with a splitter of some kind. Is this possible? What hardware would I need? Thanks!

    Read the article

  • installing old MySQL client libraries (libmysqlclient.so.15, libpq.so.4)

    - by Elijah Paul
    I'm attempting to install Nagios plugins on a Zimbra 8.0.2 server running CentOS 6.4, but have run into the following error when I run yum install nagios-plugins-all Error: Package: nagios-plugins-mysql-1.4.15-2.el5.x86_64 (epel) Requires: libmysqlclient.so.15()(64bit) Error: Package: nagios-plugins-pgsql-1.4.15-2.el5.x86_64 (epel) Requires: libpq.so.4()(64bit) Error: Package: nagios-plugins-mysql-1.4.15-2.el5.x86_64 (epel) Requires: libmysqlclient.so.15(libmysqlclient_15)(64bit) You could try using --skip-broken to work around the problem You could try running: rpm -Va --nofiles --nodigest How can I install these libraries (libmysqlclient.so.15 & libpq.so.4)? Will installing these libraries possibly break Zimbra?

    Read the article

  • Public IP Routing over Private GRE tunnel

    - by Paul
    I have a GRE tunnel configured between two linux boxes. The tunnel works fine. I can ping from each host the other private ip. Head privateip: 10.0.0.1 publicip: 8.8.8.8 Tail privateip: 10.0.0.2 publicip: 7.7.7.7 The public IP on Tail has the network block 9.9.9.0/23 statically routed over the 7.7.7.7 interface. The idea is to make the 9.9.9.0/23 ips work on servers on the 8.8.8.8 network. I configure the tail host to route the /23 block. I mounted a 9.9 IP on the head server. I can ping the 9.9 ip from the tail to the head. I can't ping the 9.9 ip from the public internet. I think I need to add some other routes because of gateway issues, but I can't seem to wrap my mind around it (not a router guy, just beating my way through something that I have never done before and vaguely understand) --danks

    Read the article

  • Recompiling Nginx 1.4.3 with "--with-http_gzip_static_module" error

    - by Elijah Paul
    I'm trying to enable the 'ngx_http_gzip_static_module' module in Nginx 1.4.3 by adding the --with-http_gzip_static_module to my ./configure configuration. But I recieve the following error when i try to recompile (make): # make make -f objs/Makefile make[1]: Entering directory `/tmp/nginx-1.4.3' make[1]: *** No rule to make target `src/os/unix/ngx_gcc_atomic_x86.h', needed by `objs/src/core/nginx.o'. Stop. make[1]: Leaving directory `/tmp/nginx-1.4.3' make: *** [build] Error 2 My current config (CentOS 6.4): # nginx -V nginx version: nginx/1.4.3 built by gcc 4.4.7 20120313 (Red Hat 4.4.7-3) (GCC) TLS SNI support enabled configure arguments: --conf-path=/etc/nginx/nginx.conf --pid-path=/var/run/nginx.pid --error-log-path=/var/log/nginx/error.log --http-proxy-temp-path=/var/cache/nginx/proxy_temp --http-fastcgi-temp-path=/var/cache/nginx/fastcgi_temp --http-uwsgi-temp-path=/var/cache/nginx/uwsgi_temp --http-scgi-temp-path=/var/cache/nginx/scgi_temp --http-log-path=/var/log/nginx/access.log --with-http_ssl_module --prefix=/usr --add-module=./nginx-sticky-module-1.1 --add-module=./headers-more-nginx-module-0.23 i was under the impression that this was a module that just need to be 'enabled' as opposed to 'added'. What am I missing here?

    Read the article

  • Unable to read data from the transport connection: An existing connection was forcibly closed by the remote host

    - by Paul J. Warner
    I am having an issue with a program where after 6 mins +- 5 secs we get the above exception. Some more info about the exception stacktrace is below. This all happens pretty religiously, 6 mins goes by and bam the following 3 exeptions. We have the application installed in 2 other environments and it is working fine there. I am hoping to find some server settings either IIS 6 or Server 2003 settings that may be causing this issue to occur. I have reviewed some of the similar questions and don't see very many answers. I am hoping that maybe the information I have provided may help a little bit. 208741,Exception,,,,2011-06-21 00:30:14.193,SERVERNAME,2624,1,CLIENTNAME,The underlying connection was closed: An unexpected error occurred on a receive. , at System.Web.Services.Protocols.WebClientProtocol.GetWebResponse(WebRequest request) at System.Web.Services.Protocols.HttpWebClientProtocol.GetWebResponse(WebRequest request) at Microsoft.Web.Services3.WebServicesClientProtocol.GetResponse(WebRequest request, IAsyncResult result) at System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke(String methodName, Object[] parameters) at System.Net.Sockets.NetworkStream.Read(Byte[] buffer, Int32 offset, Int32 size) at System.Net.FixedSizeReader.ReadPacket(Byte[] buffer, Int32 offset, Int32 count) at System.Net.Security._SslStream.StartFrameHeader(Byte[] buffer, Int32 offset, Int32 count, AsyncProtocolRequest asyncRequest) at System.Net.Security._SslStream.StartReading(Byte[] buffer, Int32 offset, Int32 count, AsyncProtocolRequest asyncRequest) at System.Net.Security._SslStream.ProcessRead(Byte[] buffer, Int32 offset, Int32 count, AsyncProtocolRequest asyncRequest) at System.Net.TlsStream.Read(Byte[] buffer, Int32 offset, Int32 size) at System.Net.PooledStream.Read(Byte[] buffer, Int32 offset, Int32 size) at System.Net.Connection.SyncRead(HttpWebRequest request, Boolean userRetrievedStream, Boolean probeRead),2004437127,114,1 208742,Exception,,,,2011-06-21 00:30:14.227,SERVERNAME,2624,1,CLIENTNAME,Unable to read data from the transport connection: An existing connection was forcibly closed by the remote host. , at System.Net.Sockets.NetworkStream.Read(Byte[] buffer, Int32 offset, Int32 size) at System.Net.FixedSizeReader.ReadPacket(Byte[] buffer, Int32 offset, Int32 count) at System.Net.Security._SslStream.StartFrameHeader(Byte[] buffer, Int32 offset, Int32 count, AsyncProtocolRequest asyncRequest) at System.Net.Security._SslStream.StartReading(Byte[] buffer, Int32 offset, Int32 count, AsyncProtocolRequest asyncRequest) at System.Net.Security._SslStream.ProcessRead(Byte[] buffer, Int32 offset, Int32 count, AsyncProtocolRequest asyncRequest) at System.Net.TlsStream.Read(Byte[] buffer, Int32 offset, Int32 size) at System.Net.PooledStream.Read(Byte[] buffer, Int32 offset, Int32 size) at System.Net.Connection.SyncRead(HttpWebRequest request, Boolean userRetrievedStream, Boolean probeRead),2004437127,114,1 208743,Exception,,,,2011-06-21 00:30:14.287,SERVERNAME,2624,1,CLIENTNAME,An existing connection was forcibly closed by the remote host , at System.Net.Sockets.NetworkStream.Read(Byte[] buffer, Int32 offset, Int32 size),-691097507,62,1

    Read the article

  • IIS7 Compression CSS files only compressed when dynamic compression is enabled

    - by Paul
    If anyone can help it would be appreciated. I would like to enable compression for static files within IIS7 (for the sake of simplicity I'll just refer to static css files for the time being). The problem I'm getting is that css files are only compressed when both dynamic and static compression is enabled in IIS for the website. What I really want to achieve is css compression (static file) whilst leaving the dynamic (aspx) pages as uncompressed for the time being (to avoid unnecessary CPU load). I am puzzled as to why just leaving 'static compression' enabled causes css files to be returned uncompressed. My applicationHost.config file has not be altered and looks like this: <httpCompression directory="%SystemDrive%\inetpub\temp\IIS Temporary Compressed Files"> <scheme name="gzip" dll="%Windir%\system32\inetsrv\gzip.dll" /> <staticTypes> <add mimeType="text/*" enabled="true" /> <add mimeType="message/*" enabled="true" /> <add mimeType="application/javascript" enabled="true" /> <add mimeType="*/*" enabled="false" /> </staticTypes> <dynamicTypes> <add mimeType="text/*" enabled="true" /> <add mimeType="message/*" enabled="true" /> <add mimeType="application/x-javascript" enabled="true" /> <add mimeType="*/*" enabled="false" /> </dynamicTypes> </httpCompression> The server-wide compression setting within IIS is set to 'Dynamic Disabled' and 'Static Enabled' from the Server Features Compression page. The web-site compression setting (Server Sites MyWebsite Features Compression) is where I am enabling and disabling dynamic compression as detailed above. Any help would be really help me get unstuck on this. Thanks

    Read the article

  • Changing MX records in named zone file

    - by Paul England
    I forgot how all this works. I have a GoDaddy account, using my own DNS and whatnot. I'm having trouble getting my email to work. They said I need to update my MX records. basically, I have the following. 184.168.30.42 is the domain's IP address, obviously. gamengai.com. 14400 IN NS n1 gamengai.com. 14400 IN NS n2 ns1 14400 IN A 184.168.30.42 ns2 14400 IN A 184.168.30.42 gamengai.com. 14400 IN A 184.168.30.42 localhost 14400 IN A 127.0.0.1 ftp 14400 IN A 184.168.30.42 www 14400 IN A 184.168.30.42 mail 14400 IN A 184.168.30.42 subdomain 14400 IN A 184.168.30.42 gamengai.com 14400 IN MX 10 mail Mail doesn't work though... they say to make the following change: 0 smtp.secureserver.net 10 mailstore1.secureserver.net So should the last line point to mailstore1.secureserver.net instead of mail in the last field? What about the other line? I had this working at one time, but it's totally gotten away from me. It's a virtual dedicated server and their support for this stuff is pretty bad... almost as bad as my admin skills since I went the programmer route.

    Read the article

  • Fedora12, XP and connection sharing via iptables

    - by Paul L
    Just a quick question ( I Hope ) To find out if what I'm trying is even possible. I am trying to share internet connection with Fedora12 as default gateway and XP machine hooked up via NIC using iptables commands as shown in Mark Sobell's book 'A Practical Guide To Fedora And Red Hat Enterprise Linux' These are the commands as placed in /etc/rc.local iptables -A FORWARD -i eth1 -o eth0 -m state --state ESTABLISHED,RELATED -j ACCEPT iptables -A FORWARD -i eth0 -o eth1 -j ACCEPT iptables -A FORWARD -j LOG iptables -t NAT -A POSTROUTING -o eth1 -j MASQUERADE I did flip the in and out parameters to match my NIC configuration ( as opposed to example from book ) but other than that followed example. One thing to note is that Sobell did not mention whether this should work with mix of Linux and XP. One other note ( maybe meaningless ) is that I do have samba working between the two machines. Thanks for any insights anyone might have. PL

    Read the article

  • Ubuntu 10.04 Server on Hyper-V Server R2 has sluggish install and command line

    - by Paul Hobart
    I've installed Ubuntu Server 10.04 (64 bit) on a Hyper-V Server R2. I've encountered two issues that I think are related: Very slow install Very slow command prompt The text-mode installer goes through a series of text-based prompt windows. It takes 7-10 seconds for each of these windows to draw on the screen. The end result is that every time I answer a prompt and hit enter I wait for 15 seconds while the screen redraws line by line. I can literally see each line of text being drawn (like the old 300 baud modems days). Once done installing, scrolling on the command line is super slow. For instance, if a simple command, like "ls", causes the screen to scroll, it will scroll very slowly. This happens on a fresh install. The server functions as a LAMP server and an OpenSSH server, but that's it (I don't even have any Virtual Hosts set up yet). AND this only happens on the Virtual Machine console. I access the console through Hyper-V Manager and don't have this problem on any of my other Virtual Machines. Also, this problem does NOT happen when accessing a shell through OpenSSH. How can I improve this performance issue?

    Read the article

  • what reverse proxy server will direct traffic to healthy servers whose health is based on a result string

    - by joshua paul
    what reverse proxy server will direct traffic to healthy servers whose health is based on a result string?? ideally i'd like something like dnsmadeeasy or ultradns - lol - but for reverse proxy i have looked at pound, delegate, ha proxy, squid, varnish, nginx, apache, and cherokee but can't see that they will work - they only test for HTTP result code scenario client request www.aaa.com www.aaa.com is a reverse proxy reverse proxy looks at "test.php" on server 1.aaa.com, 2.aaa.com and 3.aaa.com for result string "OK" if the server is "OK" then proxy requests to them help!

    Read the article

  • Removing English - United States Language from Firefox Issue...

    - by Paul
    Win7 Home Prem 32bit Firefox 3.6.2 I noticed whilst typing a hotmail email in Firefox that the default language seems to be English/United States. As i am from the UK i thought i would add in the English/United Kingdom dictionary Addon which i have done. I have set this as the default Language. Is there anyway to remove the English/United States Dictionary? It is not an Addon so i'm guessing it's the built in Firefox default language and may be unremovable?

    Read the article

  • Exporting Speed Dial settings from within Firefox into Chrome Speed dial...

    - by Paul
    Win7 Home Prem 32-bit I usually use Firefox as my browser of choice and have been using the Addin Speed Dial for ages. I have many sites added on multiple tabs within it. I have just installed the Google Chrome browser which also has the Speed Dial Extension. Is there a way to export/import/copy/sync my Speed Dial settings i have in Firefox to the Speed Dial extension in Chrome? I know i can export from Speed Dial in Firefox but can't see any easy way to import from Speed Dial in Chrome.

    Read the article

  • Network attached external harddrive from another computer.

    - by Paul Knopf
    I have a server that is setup in raid. It is on the same network as my main computer. I would like to have some of the memory on my server to act as a network attached drive on my main computer. Basically, I want it to be a new data drive (similar two C:\, but 2nd drives are mostly E:). That way, I can reformat my main computer without loosing any important data. And the data that is saved (on server E:\ drive) is secured via raid mirroring.

    Read the article

  • Configuring Fortigate OS4 for FTPS

    - by Paul
    I configured iis7 ftp to allow ssl connections. I set the ssl firewall to use ports 50000-50050. If I set up a custom service on my fortigate firewall for ftps with source ports 990-50050 and destination ports 990-50050, set it to a firewall policy and connect from a client it connects and works successfully. If I create a service FTPS Control with source port 990 and destination port 990 and another service,FTP Data with source ports 50000-50050 and destination ports 50000-50050 add them to a group FTPSSL, replace the ftps policy with FTPSSL and try connecting it tries to connect to port 990 and eventually times out. Is there a way to configure the service to only use the ports I need and not every port from 990 up?

    Read the article

  • cmd.exe version comparison?

    - by Paul
    When using batch files or console applications on Windows servers the window in question can allow text to be hightlighted (marked) for copying and pasting. Doing this pauses the batch/application and it will only resume after the copy operation. Or this is what I thought to be true. Recently on a Windows 2003 R2 SP2 server I noted that whilst the scrolling was paused the operations were not. Does anyone know if my description in the 1st para is true for older windows is not true for Windows 2003 R2 SP2 when it changed a full version comparison table for cmd.exe across different OS' ? Thanks for reading (Windows 2000 tag as that was the OS I used most before 2003 R2)

    Read the article

  • Windows 8 shortcut keys via RDP

    - by Paul
    It is possible to access any of the new shortcut keys found in Windows 8 via RDP, such as those in the accepted answer in What are the new shortcuts for Windows 8?, without having to redirect all Win key combinations through to the remote session. I am using both local and remote at the same time, and so would prefer alternate shortcuts for the remote session. Such as the basic ones listed at the Microsoft site here, and for example Alt+Home will return you to the Start screen. What about the more interesting shortcuts?

    Read the article

  • New monitor connected to HDMI adaptor doesn't show output after booting

    - by Paul
    Hello out there in the multiple monitors’ world. I am a very old newbie in your world and need help. I just purchased a new Asus VH236H monitor and hooked it up the HDMI port of an ATI Radeon HD4300 / 4500 Series display adaptor. I left the old Princeton LCD19 (TMDS) hooked up to the DVI port of the same display adaptor. Both monitors displayed the boot sequence, after I fired good old Sarastro2 (Asus P5Q Pro Turbo – Dual Core E5300 – 2.60 GHz) up. The Asus lacked one half of a second behind the Princeton until the Windows 7 Ultimate SP 1 boot up was complete. Then the Asus displayed “HDMI NO SIGNAL” and went into hibernation. The Princeton stayed lit up as before. Both monitors are displayed on the “Screen Resolution Setup Display” and I plaid around with them for a while. The only thing I accomplished was to shove the desktop icons from the Princeton to the still hibernating Asus. The “Multiple displays:” is set to “Extend these displays”, the Orientation is “Landscape” and the Resolutions are set on both to the “recommended” one. Both monitors show that they work properly in the advanced Properties display. What am I doing wrong, what am I missing? Never mind the opinions about the different resolutions of the two monitors. I always can unhook the Princeton and give it to a Goodwill Store if I do not like the setup. I just would like to make it work. Any constructive help is very much appreciated, Thank you.

    Read the article

  • Determine the time difference between two linux servers

    - by Paul
    I am troubleshooting a latency network issue on a network. It is probably a nic or cabling issue, but while I was going through the process of figuring it out, I was looking at the timings of a ping packet leaving a network card and arriving at another server. Both linux. So I have tcpdump running on both, and I issue a ping from one to the other, and back again, and looking at the timing differences might have shed light on where the latency is coming from. It is an academic exercise now, as I need to eliminate some more fundamental causes, but I was curious as to how this could be achieved. Given that ntpd is installed and running on two servers, how can I confirm the current time discrepency between the two servers, to whatever level of accuracy is possible - given that we are talking about latency on a local lan, which is ideally a millisecond or so. NTP itself is accurate to a couple of ms under good conditions, and as both servers are in the same environment, they should (presumably) achieve a similar level of accuracy, and so should have a time discrepency between them of a only few ms - but how can I check this?

    Read the article

  • How can I connect a Windows 8 PC to a Samba domain

    - by Paul
    I am using Samba 3, and want to join my Windows 8 PC to the Samba domain. Windows 8 cannot join out of the box, so I added the following registry entries: HKLM\SYSTEM\CurrentControlSet\Services\LanmanWorkstation\Parameters DWORD DomainCompatibilityMode 1 DWORD DNSNameResolutionRequired 0 And now it talks to the Samba server ok, however I get the following error: And I notice that the machine name created on the samba server does not match its name: win-8jq3fg1n74e$:x:30003:30003:Machine:/var/lib/nobody:/bin/false It is like it is using an internal name. The following is the error in the smb.log [2012/10/21 14:26:16.099520, 0] passdb/pdb_interface.c:348(pdb_default_create_user) _samr_create_user: Running the command `/usr/sbin/useradd -c Machine -d /var/lib/nobody -s /bin/false win-8jq3fg1n74e$' gave 9 [2012/10/21 14:26:28.143224, 0] lib/util_sock.c:474(read_fd_with_timeout) [2012/10/21 14:26:28.143420, 0] lib/util_sock.c:1441(get_peer_addr_internal) getpeername failed. Error was Transport endpoint is not connected read_fd_with_timeout: client 0.0.0.0 read error = Connection reset by peer.

    Read the article

  • Install 64-bit Windows 7 on Mac Using Bootcamp

    - by Paul Lefebvre
    Has anyone been able to install Windows 7 x64 under Bootcamp on a Mac? I was able to get the 32-bit version to install, but I cannot get x64 to install. The Mac doesn't seem to even want to boot the DVD. And even if I get it installed are there drivers that will work with it? I'd prefer to have Windows 7 x64 because I'd like to use the entire 6GB RAM in my MacBook Pro. I'd appreciate any tips or advice.

    Read the article

< Previous Page | 17 18 19 20 21 22 23 24 25 26 27 28  | Next Page >