Search Results

Search found 1568 results on 63 pages for 'peter hansen'.

Page 21/63 | < Previous Page | 17 18 19 20 21 22 23 24 25 26 27 28  | Next Page >

• OpenWRT based gateway with dnsmasq and internal server with bind

  - by Peter

  I have router based on OpenWRT which has dnsmasq 2.59. Inside my local area network I have a NS server bind. This server has internal and external views for a couple of my domains. My router forwards port 53 TCP and UDP from outside IP (router WAN) to this server. For the external clients everything works fine. In order to organize the internal view, I decided to add the exception to /etc/dnsmasq.conf server=/mydomain1.com/192.168.1.1 server=/mydomain2.com/192.168.1.1 server=/mydomain3.com/192.168.1.1 (192.168.1.1 - IP address of the NS server) According to dnsmasq manstrong text: More specific domains take precendence over less specific domains, so: --server=/google.com/1.2.3.4 --server=/www.google.com/2.3.4.5 will send queries for *.google.com to 1.2.3.4, except *www.google.com, which will go to 2.3.4.5 this domain name with all the sub-domains is supposed to be forward to my NS server. Everything works (SOA, NS, MX, CNAME, TXT, SRV etc.) except for A-record: # nslookup -type=a mydomain1.com Server: 192.168.1.100 Address: 192.168.1.100#53 *** Can't find mydomain1.com: No answer 192.168.1.100 - IP address of my router (dnsmasq) However, I can get the answer for the TXT-record query: # nslookup -type=txt mydomain1.com Server: 192.168.1.100 Address: 192.168.1.100#53 mydomain1.com text = "v=spf1 include:mydomain1.com -all" When I just specify the local IP of my NS server (direct access to the server without using dnsmasq) then the results are: # nslookup -type=a mydomain1.com 192.168.1.1 Server: 192.168.1.1 Address: 192.168.1.1#53 Name: mydomain1.com Address: 192.168.1.1 There is a similar situation with the MX-record: C:\>nslookup -type=mx mydomain1.com Server: router.lan Address: 192.168.1.100 mydomain1.com MX preference = 10, mail exchanger = mail.mydomain1.com mydomain1.com nameserver = ns.mydomain1.com mail.mydomain1.com internet address = 192.168.1.1 ns.mydomain1.com internet address = 192.168.1.1 C:\>nslookup -type=a mail.mydomain1.com Server: router.lan Address: 192.168.1.100 *** No address (A) records available for mail.mydomain1.com This is a dig result: # dig +nocmd mydomain1.com any +multiline +noall +answer mydomain1.com. 86400 IN SOA ns.mydomain1.com. hostmaster.mydomain1.com. ( 121204007 ; serial 28800 ; refresh (8 hours) 7200 ; retry (2 hours) 604800 ; expire (1 week) 3600 ; minimum (1 hour) ) mydomain1.com. 86400 IN NS ns.mydomain1.com. mydomain1.com. 86400 IN A 192.168.1.1 mydomain1.com. 604800 IN MX 10 mail.mydomain1.com. mydomain1.com. 3600 IN TXT "v=spf1 include:mydomain1.com -all" When I try to ping: # ping mydomain1.com ping: cannot resolve mydomain1.com: Unknown host Is it a bug of dnsmasq 2.59? How to manage this problem?

  Read the article

• Does the Belkin N150 support ADSL2+?

  - by peter

  Hi All, Does the Belkin N150, http://www.belkin.com/IWCatProductPage.process?Product_Id=492429 Support ADSL2+. It has a model number of F6D4630-4 v2 The website or manual doesn't seem to mention it. Or am I just looking in the wrong place? Thanks.

  Read the article

• Can I define Alt key menu keyboard shortcuts for bookmarks in Firefox 3.6?

  - by Peter Mortensen

  Can I define Alt key menu keyboard shortcuts for bookmarks in Firefox 3.6? Example: Tropical Weather is in the Bookmarks menu. A keyboard-only way to use this bookmark is: Alt + B + <press down arrow key a number of times + Enter I would like to be able to do it this way: Alt + B + W + Enter Where the association of the underlined letter in the bookmark menu, W, to Tropical Weather is user-defined. Is it possible?

  Read the article

• P2V Server 2008R2 with vmware converter 4.3.0 No source volumes

  - by Peter

  I'm trying to P2V a Windows Server 2008R2 to vmware vsphere 4.1 using Vmware vCenter Converter standalone 4.3. Source Box Windows Server 2008R2 24GB ram Dual Quad-Cores 1 Raid 5 drive 680 GB 3 GB "Recovery" partition 40 GB OS partition 637 GB Data partion When we try and convert using the stand alone converter and the built in vCenter converter there are no source volumes listed. Has anyone dealt with this before?

  Read the article

• Can I burn a CD ISO to DVD?

  - by Peter Turner

  Well, I just figured I'd ask because this site is so awesome that it probably is faster to ask than try it and waste a few cents. So can I burn an CD ISO to DVD? We've just got a bunch of DVD-R's lying around and I don't want to bother with torrents to download the new Fedora DVD.

  Read the article

• Good OS (gOS) instalation from USB key

  - by Peter Stegnar

  I would like to install Good OS from USB key. I have found a nice instructions http://www.pendrivelinux.com/usb-gos-install-from-windows/. Everything is OK while USB key is being prepared. But when I am trying to boot from that USB key I get the following error: "no bootable partition in table" It seems like USB key is not prepared properly ... How can I install gOS from USB key?

  Read the article

• Disk IO causing high load on Xen/CentOS guest

  - by Peter Lindqvist

  I'm having serious issues with a xen based server, this is on the guest partition. It's a paravirtualized CentOS 5.5. The following numbers are taken from top while copying a large file over the network. If i copy the file another time the speed decreases in relation to load average. So the second time it's half the speed of the first time. It needs some time to cool off after this. Load average slowly decreases until it's once again usable. ls / takes about 30 seconds. top - 13:26:44 up 13 days, 21:44, 2 users, load average: 7.03, 5.08, 3.15 Tasks: 134 total, 2 running, 132 sleeping, 0 stopped, 0 zombie Cpu(s): 0.0%us, 0.1%sy, 0.0%ni, 25.3%id, 74.5%wa, 0.0%hi, 0.0%si, 0.1%st Mem: 1048752k total, 1041460k used, 7292k free, 3116k buffers Swap: 2129912k total, 40k used, 2129872k free, 904740k cached PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 1506 root 10 -5 0 0 0 S 0.3 0.0 0:03.94 cifsd 1 root 15 0 2172 644 556 S 0.0 0.1 0:00.08 init Meanwhile the host is ~0.5 load avg and steady over time. ~50% wait Server hardware is dual xeon, 3gb ram, 170gb scsi 320 10k rpm, and shouldn't have any problems with copying files over the network. disk = [ "tap:aio:/vm/dev01.img,xvda,w" ] I also get these in the log INFO: task syslogd:1350 blocked for more than 120 seconds. "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. syslogd D 00062E4F 2208 1350 1 1353 1312 (NOTLB) c0ef0ed0 00000286 6e71a411 00062e4f c0ef0f18 00000009 c0f20000 6e738bfd 00062e4f 0001e7ec c0f2010c c181a724 c1abd200 00000000 ffffffff c0ef0ecc c041a180 00000000 c0ef0ed8 c03d6a50 00000000 00000000 c03d6a00 00000000 Call Trace: [<c041a180>] __wake_up+0x2a/0x3d [<ee06a1ea>] log_wait_commit+0x80/0xc7 [jbd] [<c043128b>] autoremove_wake_function+0x0/0x2d [<ee065661>] journal_stop+0x195/0x1ba [jbd] [<c0490a32>] __writeback_single_inode+0x1a3/0x2af [<c04568ea>] do_writepages+0x2b/0x32 [<c045239b>] __filemap_fdatawrite_range+0x66/0x72 [<c04910ce>] sync_inode+0x19/0x24 [<ee09b007>] ext3_sync_file+0xaf/0xc4 [ext3] [<c047426f>] do_fsync+0x41/0x83 [<c04742ce>] __do_fsync+0x1d/0x2b [<c0405413>] syscall_call+0x7/0xb ======================= I have tried disabling irqbalanced as suggested here but it does not seem to make any difference.

  Read the article

• Windows Task Manager equivalent for OS X, showing more details than Activity Monitor?

  - by Peter

  Being a Windows convert, I am looking for Task Manager equivalent for OS X. Please do not recommend Activity Monitor, since it misses two important features of Task Manager: per process disk i/o (read, write, other) simple process description (like what is this 'mds' process? where does it live?) Any suggestions?

  Read the article

• Most valued features of Opera?

  - by Peter Mortensen

  What feature do you value the most in the Opera web browser (Windows, Linux and MacIntosh) ? Please only one feature per post - you may post several times. If possible please also provide a description of the feature for those who don't know what it is. A reference to a (YouTube) video demonstrating the feature would be a plus.

  Read the article

• Updating Network Solutions Virtual Private Server

  - by Peter Turner

  Just got a VPS from Network Solutions, it's got Red Hat 4, PHP 5.16, Java 1.4, no Yum and a whole bunch of packages I'd expect to have from a fresh install. Anyway, obviously I sound like a spoiled Ubunutoligist, but do I seriously have to manually update all this stuff, is there a shortcut, I'm used to Fedora, so I'm not sure what the differences are between using Yum in Redhat and Fedora. Should I just demand that Network Solutions give me a server that's not 4 years old or is there a way to update this thing that won't take all week?

  Read the article

• Performance experiences for running Windows 7 on a Thin-Client?

  - by Peter Bernier

  Has anyone else tried installing Windows 7 on thin-client hardware? I'd be very interested to hear about other people's experiences and what sort of hardware tweaks they had to do to get it to work. (Yes, I realize this is completely unsupported.. half the fun of playing with machines and beta/RC versions is trying out unsupported scenarios. :) ) I managed to get Windows 7 installed on a modified Wyse 9450 Thin-Client and while the performance isn't great, it is usable, particularly as an RDP workstation. Before installing 7, I added another 256Mb of ram (512 total), a 60G laptop hard-drive and a PCI videocard to the 9450 (this was in order to increase the supported screen resolution). I basically did this in order to see whether or not it was possible to get 7 installed on such minimal hardware, and see what the performance would be. For a 550Mhz processor, I was reasonably impressed. I've been using the machine for RDP for the last couple of days and it actually seems slightly snappier than the default Windows XP embedded install (although this is more likely the result of the extra hardware). I'll be running some more tests later on as I'm curious to see particularl whether the streaming video performance will improve. I'd love to hear about anyone's experiences getting 7 to work on extremely low-powered hardware. Particularly any sort of tweaks that you've discovered in order to increase performance..

  Read the article

• SMTP service on Windows 2008 R2 Core

  - by peter

  Hello, I have setup a server with Windows 2008 R2 Core Web Edition. The question is, how can I install the IIS7 SMTP service? Or is SMTP missing in the Core editions? Thank you

  Read the article

• Error starting Hyper-V VM

  - by Peter Bernier

  I'm trying to start a VM on a new Hyper-V installation and I'm receiving the following error: The virtual machine could not be started because the hypervisor is not running. The following actions may help you resolve the problem: 1) Verify that the processor of the physical computer has a supported version of hardware-assisted virtualization. 2) Verify that hardware-assisted virtualization and hardware-assisted data execution protection are enabled in the BIOS of the physical computer. (If you edit the BIOS to enable either setting, you must turn off the power to the physical computer and then turn it back on. Resetting the physical computer is not sufficient.) 3) If you have made changes to the Boot Configuration Data store, review these changes to ensure that the hypervisor is configured to launch automatically. My machine supports virtualization at the hardware level and it is enabled in BIOS. Why am I receiving this error?

  Read the article

• How do I correct a directory incorrectly copied into itself?

  - by Peter Boughton

  Given the following situation... <path>/mydir1/mydir2 ...where mydir2 should have overwritten mydir1, but was instead placed inside, and both directories actually have the same filename. How is that fixed? Attempting to do mv <path>/mydir/mydir/* <path>/mydir/ or mv <path>/mydir <path>/ results in: mv: cannot move `<path>/mydir/mydir` to a subdirectory of itself, `<path>/mydir` This seems stupidly simple, but it's late here and I can't figure it out. There are seventeen such directories to fix (path differs for each, but same mydir name). To confirm, the error message can be caused with this: # cd /path/to/directory # mv mydir/mydir ./ mv: cannot move `mydir/mydir' to a subdirectory of itself, `./mydir' Also tried: # mv mydir/mydir/* mydir/ mv: cannot move `mydir/mydir/otherdir1' to a subdirectory of itself, `mydir/otherdir1' mv: cannot move `mydir/mydir/otherdir2' to a subdirectory of itself, `mydir/otherdir2' and... # mv /path/to/directory/mydir/mydir/otherdir1 /path/to/directory/mydir/ mv: cannot move `/path/to/directory/mydir/mydir/otherdir1' to a subdirectory of itself, `/path/to/directory/mydir/otherdir1' and using a temporary directory: # mv mydir/mydir ./mydir-temp # mv mydir-temp/* mydir/ mv: cannot move `mydir-temp/otherdir1' to a subdirectory of itself, `mydir/otherdir1' mv: cannot move `mydir-temp/otherdir2' to a subdirectory of itself, `mydir/otherdir2' I found a similar question "How to recursively move all files (including hidden) in a subfolder into a parent folder in *nix?" which suggested that mv bar/{,.}* . would do this. But this also gives the same errors, as well as confusingly picking up . and .. from somewhere. # cd mydir # mv mydir/{,.}* . mv: cannot move `mydir/otherdir1' to a subdirectory of itself, `./otherdir1' mv: cannot move `mydir/otherdir2' to a subdirectory of itself, `./otherdir2' mv: cannot move `mydir/.' to `./.': Device or resource busy mv: cannot move `mydir/..' to `./..': Device or resource busy mv: overwrite `./.file'? y Another similar question "linux mv command weirdness" suggests that mv doesn't overwrite and a copy is required. # cd mydir # cp -rf ./mydir/* ./ cp: overwrite `./otherdir1/file1'? y cp: overwrite `./otherdir1/file2'? y cp: overwrite `./otherdir1/file3'? This appears to be working... except there's a lot of files (and dirs) - I don't want to confirm every one! Isn't the f there supposed to prevent this? Ok, so cp was aliased to cp -i (which I found out with type cp), and bypassed by using \cp -rf ./mydir/* ./ which seems to have worked. Although I've solved the problem of getting dirs/files from one place to another, I'm still curious as to what's going on with the mv stuff - is this really a deliberate feature as suggested by Warner?

  Read the article

• How to connect the printer HP 2575 to a network?

  - by Peter

  I have 2 PCs and a router and I want to connect my HP 2575 to this network. So, I found a network cable and I connected the printer to the router. I access the router and I can see that the printer is connected. My question is: How can I use the printer, from one of my computer. I tried Add Printer feature, but with no luck. Any ideas?

  Read the article

• how to create a hyperlink to another monitor

  - by peter Finn

  Is there something I am missing when I create a hyperlink to display on another monitor I haven't come across the same facility so fa

  Read the article

• How public should a public key be allowed to become?

  - by Peter Coulton

  I have a script that I use to setup new slices on slicehost and one of the steps is to add my public key to the authorized_keys file. At the moment I scp a key manually, but ideally I would have the script download the key. So if my public key was very public what's the worst that could happen ? :)

  Read the article

• Windows Vista Corrupt Registry

  - by Peter

  Hey, I have a laptop with Windows Vista Basic. It won't boot. I have tried an automatic repair with the installation disc but the error cannot be repaired automatically. According to the test results the registry is corrupt. I have found this guide on how to recover from a corrupt registry with Windows XP here. Is this guide also applicable to Vista or is there an alternative method I can try (short of reinstalling Vista)? Cheers, Pete

  Read the article

• Magnetic Stripe Reader over Terminal Server has random Uppercase/Lowercase nonsense

  - by Peter Turner

  The Magnetic Stripe Reader that I'm using and testing is just supposed to be sending keystrokes. Unfortunately, it seems to randomly be sending upper case and lower case keystrokes, sometimes substituting % for 5 and ^ for 6 and vice versa. (If you've ever programmed for a magnetic strip reader, you know that's not a good thing.) Is there something in the RDP protocol that causes this? I've got kind of a convoluted system, running XP inside virtualbox on Fedora 11 RDP'ed into a win2k3 server. It works on the XP VM and it doesn't work on the RDP'ed one. What's weirder, is that I'm not even emulating the USB drivers for my Mag Card Reader. Linux is sending keystrokes straight in to windows, and MSTSC on windows XP is sending crap to the Win2k3 server. I'm 99% certain this isn't a problem with the card reader, it has nothing to do with my programming either. (I get the same junk coming into notepad that I get coming into our software [that's why I didn't ask on SO]). And, it works with rdesktop programs other than MSTSC.exe! Needless to say, I'm in need of some RDP Guruship.

  Read the article

• How can the font size be changed in Notepad++?

  - by Peter Mortensen

  How can the font size be changed in Notepad++? I just downloaded and installed Notepad++ v5.4.5 (I have been using UltraEdit for the last 11.5 years) and can not find a menu command for changing the screen font. I want to change it to Lucida Console 18pt. Other notes: to download Notepad++ go directly to the SourceForce download page for Notepad++.

  Read the article

• How Can I Limit the Amount of RAM a Mac OS Application Can Use?

  - by Peter

  I installed dropbox and it has terrible memory management. It often uses 3GB out of my 4GB of RAM. Is there any way to limit the app memory usage? I would like to never allow more than 250 MB of RAM.

  Read the article

• Computer resetting semi-randomly

  - by Peter

  Hi, I'm having a problem with my desktop whereby it sometimes resets itself semi-randomly. For example, I'll switch it on, it'll boot an OS and shortly after getting to the desktop it will immediately reset with no warning. The time isn't consistent - sometimes it does it before reaching login. I'm pretty sure it's not an OS thing; have tried Ubuntu and a Windows install and both exhibit it. It also doesn't appear to be heat-related because sometimes it appears to be able to "get past" it and will then run stably even under load; if anything it seems to be worse from a cold start. My gut feeling is some kind of power issue but I'm clutching at straws a little. Any suggestions on how I could go about testing it or trying to narrow the problem down would be appreciated. The machine is four years old now so while I can replace components if needed, it's not worth enough that I'm comfortable buying new parts without being pretty confident that they'll fix the problem. Thanks in advance for any help :) Edit: Okay, the motherboard is a MSI K8N SLI; CPU is an Athlon64 X2 4200+. Has one video card, a GeForce 7800GT. 1GB RAM, not sure of brand; 3 hard drives, two SATA and one PATA. Flashed motherboard to latest BIOS some time ago. Edit the Second: I thought I'd narrowed it down to the PSU for a while, but then it recurred again. I ended up pulling everything out but CPU, RAM and motherboard and it still seems to be stuffed (if anything, it's gotten worse in the last couple of days). I assume it's one of those three components, but the machine is old enough that I don't really want to spend money replacing any of them. So thanks for everyone's suggestions; much appreciated!

  Read the article

• Why does my DNS change (and break) at regular intervals?

  - by Peter Kelly

  I have a laptop running Windows 7. Up until recently, everything was fine. We have multiple devices in my house connecting to the one access point with no problems. No issues with ISP. Now my Windows 7 PC DNS settings change every minute or so. Before the problem occurs if I do an ipconfig /all I have two DNS settings (primary/secondary) and everything is fine. After a short period of time this change to a sole DNS, 10.0.0.1. Webpages no longer resolve. If I do an ipconfig /renew, this fixes the problem. I have tried uninstalling various programs I thought might be related but the problem persists. Any ideas of potential causes?

  Read the article

• XP Pro freezes on welcome screen

  - by Peter B

  I have a problem that sounds much the same as http://superuser.com/questions/83101/how-to-diagnose-a-freeze-on-startup-in-windows-xp About every 2nd or 3rd boot, XP-Pro freezes on the Welcome page (the one showing the user name icons). The mouse moves the cursor OK, but clicking on an icon does nothing, and neither does any keystroke. If you press too many keys there is a beep and after that the mouse won't move the cursor anymore. The work-around is always to reboot into Safe mode and request a CHKDSK /R After this, the next boot is fine. There are no related entries in the Event log when the problem occurs. The only two entries are: "Microsoft (R) Windows (R) 5.01. 2600 Service Pack 3 Multiprocessor Free." "The Event log service was started." Update 1: Many thanks for that but I found no problems with any diagnostics I have run. But, I have managed to locate, and code round, the source of the problem - which is with whatever processing goes on behind the XP Welcome (as opposed to "classic") login screen. Unfortunately, having classic login means you don't get the useful Fast User Switching (FUS) login/switch mode. So, to retain this, my fix is: Add a Windows shutdown script (using gpedit.msc) to force "classic" mode for the first logon after next XP startup, by running: reg add "hklm\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon" /v LogonType /t REG_DWORD /d 0 /f Add a Scheduled Task to run at User Logon that enables Welcome screen (and hence FUS) by running the same command with 1 instead of 0 after the /d flag. The task is run as a privileged user (who can run "reg add").

  Read the article

• Single nginx configuration for multiple sub domains

  - by Peter Smit

  I have the following directory structure for my websites: /var/www/sitename/subdomain/(public|log) e.g /var/www/stackoverflow.com/careers/public/index.html Can I make a single generic nginx configuration to do this? So that every domain is mapped to the right directory? I would not like to edit my nginx configuration for every website I add. The root domain can always be mapped to the www subdomain.

  Read the article

< Previous Page | 17 18 19 20 21 22 23 24 25 26 27 28  | Next Page >