Search Results

Search found 2583 results on 104 pages for 'ping'.

Page 21/104 | < Previous Page | 17 18 19 20 21 22 23 24 25 26 27 28  | Next Page >

• VMware two vSwitches Guests can't communicate between them

  - by Aaron R.

  I have some servers in this configuration: And I am not able, from VMGuest1, to ping either VMGuest3 or VMGuest4. I can, however, ping Host1 and Host2, which are attached to pSwitch1. The behavior is the same with VMGuest3 or 4 trying to ping VMGuest 1 or 2. I don't have promiscuity enabled for any of these switches, nor do I have a bridge set up inside ESXi for the virtual switches. I know that one of these options is usually necessary when trying to get connectivity between two virtual switches. These switches are connected, however, through their respective physical switches which are bridged together. Ping just times out, arp request looks like this: [root@vmguest1:~]# arp -a vmguest3 vmguest3.example.com (1.2.3.4) at <incomplete> on eth0 [root@vmguest1:~]# arp -a host1 host1.example.com (1.2.3.5) at 00:0C:64:97:1C:FF [ether] on eth0 VMGuest1 can reach hosts on pSwitch1, so why can't it get to hosts on vSwitch1 through pSwitch1 the same way?

  Read the article

• Why is my iPhone WIFI so slow at home?

  - by John Fouhy

  When my iPhone is connected to my home wireless network, the internet is unusably slow. I installed the speedtest.net application; here are some results from tonight: Down: 0.0kB/s, Up: 0.0kB/s, ping: 2230ms Down: 2.5kB/s, Up: 40.5kB/s, ping: 2182ms Down: 0.0kB/s, Up: 20.0kB/s, ping: 197ms For comparison, here is the result from my iMac to the same server, which is on the same wireless network (and has no wired connection): Down: 139kB/s, Up: 53.8kB/s, ping: 182ms Neither my iMac nor the Dell laptop also on the network have experienced the wifi problems I get with my iPhone. On the other hand, I tried browsing a website on the wireless network at work with no problems. EDIT: SpeedTest at work gives me 156kB/s down. EDIT2: Girlfriend (owner of the Dell) reports actually the internet is sometimes very slow. Perhaps there is more going on. No problems with my iMac. My router is a ASUS WL-500g Premium V2 running OpenWrt Kamikaze with X-Wrt Extensions 8.09.

  Read the article

• OpenVPN - client-to-client traffic working in one direction but not the other

  - by Pawz

  I have the following VPN configuration: +------------+ +------------+ +------------+ | outpost |----------------| kino |----------------| guchuko | +------------+ +------------+ +------------+ OS: FreeBSD 6.2 OS: Gentoo 2.6.32 OS: Gentoo 2.6.33.3 Keyname: client3 Keyname: server Keyname: client1 eth0: 10.0.1.254 eth0: 203.x.x.x eth0: 192.168.0.6 tun0: 192.168.150.18 tun0: 192.168.150.1 tun0: 192.168.150.10 P-t-P: 192.166.150.17 P-t-P: 192.168.150.2 P-t-P: 192.168.150.9 Kino is the server and has client-to-client enabled. I am using "fragment 1400" and "mssfix" on all three machines. An mtu-test on both connections is successful. All three machines have ip forwarding enabled, by this on the gentoo boxes: net.ipv4.conf.all.forwarding = 1 And this on the FreeBSD box: net.inet.ip.forwarding: 1 In the server's "ccd" directory is the following files: client1: iroute 192.168.0.0 255.255.255.0 client3: iroute 10.0.1.0 255.255.255.0 The server config has these routes configured: push "route 192.168.0.0 255.255.255.0" push "route 10.0.1.0 255.255.255.0" route 192.168.0.0 255.255.255.0 route 10.0.1.0 255.255.255.0 Kino's routing table looks like this: 192.168.150.0 192.168.150.2 255.255.255.0 UG 0 0 0 tun0 10.0.1.0 192.168.150.2 255.255.255.0 UG 0 0 0 tun0 192.168.0.0 192.168.150.2 255.255.255.0 UG 0 0 0 tun0 192.168.150.2 0.0.0.0 255.255.255.255 UH 0 0 0 tun0 Outpost's like this: 192.168.150 192.168.150.17 UGS 0 17 tun0 192.168.0 192.168.150.17 UGS 0 2 tun0 192.168.150.17 192.168.150.18 UH 3 0 tun0 And Guchuko's like this: 192.168.150.0 192.168.150.9 255.255.255.0 UG 0 0 0 tun0 10.0.1.0 192.168.150.9 255.255.255.0 UG 0 0 0 tun0 192.168.150.9 0.0.0.0 255.255.255.255 UH 0 0 0 tun0 Now, the tests. Pings from Guchuko to Outpost's LAN IP work OK, as does the reverse - pings from Outpost to Guchuko's LAN IP. However... Pings from Outpost, to a machine on Guchuko's LAN work fine: .(( root@outpost )). (( 06:39 PM )) :: ~ :: # ping 192.168.0.3 PING 192.168.0.3 (192.168.0.3): 56 data bytes 64 bytes from 192.168.0.3: icmp_seq=0 ttl=63 time=462.641 ms 64 bytes from 192.168.0.3: icmp_seq=1 ttl=63 time=557.909 ms But a ping from Guchuko, to a machine on Outpost's LAN does not: .(( root@guchuko )). (( 06:43 PM )) :: ~ :: # ping 10.0.1.253 PING 10.0.1.253 (10.0.1.253) 56(84) bytes of data. --- 10.0.1.253 ping statistics --- 3 packets transmitted, 0 received, 100% packet loss, time 2000ms Guchuko's tcpdump of tun0 shows: 18:46:27.716931 IP 192.168.150.10 > 10.0.1.253: ICMP echo request, id 63009, seq 1, length 64 18:46:28.716715 IP 192.168.150.10 > 10.0.1.253: ICMP echo request, id 63009, seq 2, length 64 18:46:29.716714 IP 192.168.150.10 > 10.0.1.253: ICMP echo request, id 63009, seq 3, length 64 Outpost's tcpdump on tun0 shows: 18:44:00.333341 IP 192.168.150.10 > 10.0.1.253: ICMP echo request, id 63009, seq 3, length 64 18:44:01.334073 IP 192.168.150.10 > 10.0.1.253: ICMP echo request, id 63009, seq 4, length 64 18:44:02.331849 IP 192.168.150.10 > 10.0.1.253: ICMP echo request, id 63009, seq 5, length 64 So Outpost is receiving the ICMP request destined for the machine on it's subnet, but appears not be forwarding it. Outpost has gateway_enable="YES" in its rc.conf which correctly sets net.inet.ip.forwarding to 1 as mentioned earlier. As far as I know, that's all that's required to make a FreeBSD box forward packets between interfaces. Is there something else I could be forgetting ? FWIW, pinging 10.0.1.253 from Kino has the same result - the traffic does not get forwarded. UPDATE: I've found that I can only ping certain IP's on Guchuko's LAN from Outpost. From Outpost I can ping 192.168.0.3 and 192.168.0.2, but 192.168.99 and 192.168.0.4 are unreachable. The same tcpdump behavior can be seen. I think this means the problem can't be due to ipforwarding or routing, because Outpost can reach SOME hosts on Guchuko's LAN but not others and likewise, Guchuko can reach two hosts on Outpost's LAN, but not others. This baffles me.

  Read the article

• Setup IPv6 over IPv4 tunnel in VPN

  - by bfmeb

  Let me explain my szenario: I have a linux server A. A is reachable in a VPN. So if I am connected to the VPN over Internet I can successfully ping A. Server A is connected to a Router B. Router B has a local ipv6 address and there are resources (each of them with a local ipv6 address) connected to Router B. After I am connected to VPN, I am able to use ssh to have access over A. Now I can use the ping6 command to ping the Router B or one of its connected resources. This works fine. The ping fails if I try to ping router B on my computer. Overview: My Computer -- VPN -- Server A(ipv4) -- Router B(ipv6) -- Ressource A(ipv6) On resource A runs for example a HTTP-Server. My question is: How can I access Resource A (for example with HTTP) on my to VPN connected computer? Is it possible? Should I setup a tunnel device? Sorry for this inexpertly explanation, but I am new to network stuff!

  Read the article

• XenServer 5.6.1-fp1. Can't get network working

  - by casey_miller

  I have a PC where XenServer 5.6.1 fp-1 has been successfully installed. I've manually set the network settings: 192.168.1.50 255.255.255.0 192.168.1.1 but it's set to xenbr0 iface. While eth0 is empty. When I click on "Configure Management Inteface" it shows that eth0 is connected. But when I ping a default gateway (which is 100% should be accessible) it fails. I used to another shell (Alt+F3) and logged as root. I also failed to ping. with both: ping -I eth0 192.168.1.1 and ping -I xenbr0 192.168.1.1 Be assured that: Cable works Ethernet adapter is 100% functional (prev OS was Ubuntu it was working) There is no firewall rule to deny anything. (everything is allowed) So the question is: What is a problem???

  Read the article

• Macvlan based interface pings from host but not from namespace

  - by jtlebi

  My setup: Private network vboxnet1 10.0.7.0/24 1 Host, ubuntu desktop 1 VM, ubuntu server (VirtualBox) Adressing layout: HOST: 10.0.7.1 VM: 10.0.7.101 VM MAC NAMESPACE: 10.0.7.102 On the VM, I ran the following commands: ip netns add mac # create a new nmespace ip link add link eth0 mac0 type macvlan # create a new macvlan interface ip link set mac0 netns mac On the mac namespace, inside the VM: ip link set lo up ip link set mac up ip addr add 10.0.7.102/24 dev mac0 So that we basically end up with: (Like Inception ?) +------------------------+ | Host: 10.0.7.1 | | | | +--------------------+ | | | VM: 10.0.7.101 | | | | | | | | +----------------+ | | | | | NS: 10.0.7.102 | | | | | | | | | | | +----------------+ | | | +--------------------+ | +------------------------+ What works: Ping between Host and VM Ping between NS and NS dhclient from NS What does not work: ping between NS and VM ping between NS and Host Where I started to go nuts: tcpdump on host (the real machine) actually shows ARP request AND replies tcpdump on NS shows ARP requests sent to the host tcpdump on VM makes the whole mess work (!) -- ping starts to get answers when tcpdump is started on the VM ?!? So, I bet you were eager for it, my question is: how to I make it work ? I suspect something's wrong with ARP on the macvlan inside the NS but can't figure out what exactly... Btw, I did the same expérimentations with the mac0 interface directly on the VM (no namespace) and it worked flawlessly.

  Read the article

• Linux foxboard network monitor

  - by het.oosten

  I want to use a Foxboard a simple network monitor for multiple routers (all routers are connected to the internet). Foxboard is a mini pc with an embedded version of Debian. My idea is to use multiple virtual network devices like this: eth0 192.168.2.10 eth0:1 192.168.3.10 eth0:2 192.168.4.10 I found a nice Python script to ping an external host here (the solution from Ryan Cox): http://stackoverflow.com/questions/316866/ping-a-site-in-python Is it possible to configure Debian to use eth0 when I ping www.site-a.com and eth0:1 when I ping www.site-b.com?

  Read the article

• Why "scope link" ipv6 address can be pinged via interfaces which they are not active on

  - by olagu

  [root@2_01 ~]# /sbin/ip -6 addr show pubeth0 inet6 2001:1::6/64 scope global inet6 2001:1::1/64 scope global inet6 fe80::20c:29ff:fe69:f9e8/64 scope link [root@v2_01 ~]# /sbin/ip -6 addr show pubeth1 inet6 fe80::20c:29ff:fe69:f906/64 scope link [root@2_01 ~]# ping6 fe80::20c:29ff:fe69:f9e8%pubeth1 PING fe80::20c:29ff:fe69:f9e8%pubeth1(fe80::20c:29ff:fe69:f9e8) 56 data bytes 64 bytes from fe80::20c:29ff:fe69:f9e8: icmp_seq=1 ttl=64 time=0.259 ms --- fe80::20c:29ff:fe69:f9e8%pubeth1 ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 286ms rtt min/avg/max/mdev = 0.259/0.259/0.259/0.000 ms [root@2_01 ~]# ping6 fe80::20c:29ff:fe69:f9e8%pubeth0 PING fe80::20c:29ff:fe69:f9e8%pubeth0(fe80::20c:29ff:fe69:f9e8) 56 data bytes 64 bytes from fe80::20c:29ff:fe69:f9e8: icmp_seq=1 ttl=64 time=0.057 ms --- fe80::20c:29ff:fe69:f9e8%pubeth0 ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 390ms rtt min/avg/max/mdev = 0.057/0.057/0.057/0.000 ms Why can I ping6 "fe80::20c:29ff:fe69:f9e8" via pubeth1?

  Read the article

• Vim not restoring screen contents on Debian?

  - by peu ping

  I always thought Vim restored the previous contents of the screen upon closing. This allows me to remember what commands I was typing previously and what I wanted to do next. Recently I've been using Debian 6 and Ubuntu (CLIs only) in a VM for a development project and I've been extremely annoyed with how Vim is operating. After I close the file its contents stay on the screen making me second guess whether I'm still in Vim or not, and having to use history to find out what I typed previously. I've been unable to find any solution. Using tput smcup and rmcup for instance does absolutely nothing.

  Read the article

• links for 2011-03-02

  - by Bob Rhubart

  Oracle Technology Network Architect Day: Denver Registration is now open. Sessions will cover IT Optimization and consolidation, cloud computing, the evolving role of enterprise IT, and more. (tags: oracle otn entarch event denver) SOA Suite Integration: Part 2: A basic BPEL process (The Shorten Spot) The latest post in Anthony's Shorten's series about SOA Suite integration with Oracle Utilities Application Framework. (tags: oracle otn soa bpel soasuite) ADF: How to create web service based ADF pages The first in promised series of three posts on the topic by Marianne Horsch. (tags: oracle soa webservices adf) David Butler: MDM Poised for Growth (Oracle Master Data Management) David says: "Businesses are talking about the need to fix master data before they can successfully move forward on SOA initiatives. And the growing demands for compliance continue to be a major driver." (tags: oracle otn mdm) Cloud governance is about more than security | The Pervasive Data Center - CNET News Legal and regulatory procedures, transparency, service levels, indemnification, and more are all part of a broader governance landscape that requires IT to work closely with business users. Read this blog post by Gordon Haff on The Pervasive Data Center. (tags: ping.fm) Senthilkumar Rajendran's Blog: Horizontal Scaling OBIEE 11g (tags: ping.fm) InfoQ: Searching Without Objectives Kenneth O. Stanley considers that innovation is stifled when we are strictly following a high goal, and we would progress more when we are inclined to discovery rather than following an objective. (tags: ping.fm) InfoQ: Brownfield Software - Industrial Waste or Business Fertilizer? Josh Graham addresses 10 myths related to working on legacy software, attempting to prove that one can make good use of legacy code without having to rewrite the entire thing. (tags: ping.fm)

  Read the article

• Can't get Wireless to work! (Fujitsu siemens ESPRIMO Mobile u9200) Ubuntu 12.4

  - by Martin Oscarsson

  I can't get wireless to work on my computer. I have recently installed 12.04. Computer name: (Fujitsu siemens ESPRIMO Mobile u9200) Hardware button starts bluetooth - so can't start that way. Have searched the Internet for help but can't find any on my specific problem! State: connected (global) - Device: wlan0 ---------------------------------------------------------------- Type: 802.11 WiFi Driver: ath5k State: disconnected Default: no *-network beskrivning: Trådlöst gränssnitt produkt: AR242x / AR542x Wireless Network Adapter (PCI-Express) tillverkare: Atheros Communications Inc. *-network beskrivning: Ethernet interface produkt: 88E8055 PCI-E Gigabit Ethernet Controller tillverkare: Marvell Technology Group Ltd. HERE IS ALL THE NETWORK INFO: ellika@ellikas:~$ ifconfig eth0 Link encap:Ethernet HWaddr 00:1e:33:00:96:9a inet addr:192.168.1.26 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::21e:33ff:fe00:969a/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:13778 errors:0 dropped:0 overruns:0 frame:0 TX packets:9510 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:14022669 (14.0 MB) TX bytes:1001621 (1.0 MB) Interrupt:17 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:1542 errors:0 dropped:0 overruns:0 frame:0 TX packets:1542 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:125040 (125.0 KB) TX bytes:125040 (125.0 KB) ellika@ellikas:~$ sudo ifconfig [sudo] password for ellika: eth0 Link encap:Ethernet HWaddr 00:1e:33:00:96:9a inet addr:192.168.1.26 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::21e:33ff:fe00:969a/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:13801 errors:0 dropped:0 overruns:0 frame:0 TX packets:9528 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:14024965 (14.0 MB) TX bytes:1002836 (1.0 MB) Interrupt:17 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:1542 errors:0 dropped:0 overruns:0 frame:0 TX packets:1542 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:125040 (125.0 KB) TX bytes:125040 (125.0 KB) ellika@ellikas:~$ sudo ifconfig wlan0 up SIOCSIFFLAGS: Operationen inte möjlig p.g.a. RF-kill ellika@ellikas:~$ phy0 Wireless LAN phy0: command not found ellika@ellikas:~$ rfkill Usage: rfkill [options] command Options: --version show version (0.4-1ubuntu2 (Ubuntu)) Commands: help event list [IDENTIFIER] block IDENTIFIER unblock IDENTIFIER where IDENTIFIER is the index no. of an rfkill switch or one of: <idx> all wifi wlan bluetooth uwb ultrawideband wimax wwan gps fm ellika@ellikas:~$ sudo rf-kill unblock all sudo: rf-kill: kommandot hittades inte ellika@ellikas:~$ sudo rfkill unblock all ellika@ellikas:~$ sedan sudo ifconfig wlan0 sedan: command not found ellika@ellikas:~$ sudo ifconfig wlan0 wlan0 Link encap:Ethernet HWaddr 00:22:5f:3f:63:76 BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) ellika@ellikas:~$ ^C ellika@ellikas:~$ ^C ellika@ellikas:~$ sudo rfkill unblock all ellika@ellikas:~$ sudo ifconfig wlan0 up SIOCSIFFLAGS: Operationen inte möjlig p.g.a. RF-kill ellika@ellikas:~$ sudo rfkill unblock all ellika@ellikas:~$ sudo rfkill list 0: phy0: Wireless LAN Soft blocked: no Hard blocked: yes ellika@ellikas:~$ sudo rfkill unblock all ellika@ellikas:~$ echo -e "sudo lshw --class network:\n\n$(sudo lshw -c network)\n\nlspci -nnn | grep Ethernet:\n\n$(lspci -nnn | grep Ethernet)\n\nlsusb:\n\n$(lsusb)\n\niwlist wlan0 scanning:\n\n$(iwlist wlan0 scanning)\n\nrfkill list:\n\n$(rfkill list)\n\nping -c 5 google.com:\n\n$(ping -c 5 google.com)\n\nhost google.com 8.8.8.8:\n\n$(host google.com 8.8.8.8)\n\nlsb_release -a:\n\n$(lsb_release -a)\n\nuname -a:\n\n$(uname -a)" ^[[C^[[C^[[C^[[C^[[C^[[B wlan0 Failed to read scan data : Network is down No LSB modules are available. sudo lshw --class network: *-network beskrivning: Ethernet interface produkt: 88E8055 PCI-E Gigabit Ethernet Controller tillverkare: Marvell Technology Group Ltd. physical id: 0 bus info: pci@0000:04:00.0 logiskt namn: eth0 version: 14 serienummer: 00:1e:33:00:96:9a storlek: 100Mbit/s kapacitet: 1Gbit/s bredd: 64 bits klocka: 33MHz förmågor: pm vpd msi pciexpress bus_master cap_list rom ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation konfiguration: autonegotiation=on broadcast=yes driver=sky2 driverversion=1.30 duplex=full firmware=N/A ip=192.168.1.26 latency=0 link=yes multicast=yes port=twisted pair speed=100Mbit/s resurser: irq:44 memory:f8000000-f8003fff ioport:3000(storlek=256) memory:f2000000-f201ffff *-network INAKTIVERAD beskrivning: Trådlöst gränssnitt produkt: AR242x / AR542x Wireless Network Adapter (PCI-Express) tillverkare: Atheros Communications Inc. physical id: 0 bus info: pci@0000:06:00.0 logiskt namn: wlan0 version: 04 serienummer: 00:22:5f:3f:63:76 bredd: 64 bits klocka: 33MHz förmågor: pm msi pciexpress msix bus_master cap_list ethernet physical wireless konfiguration: broadcast=yes driver=ath5k driverversion=3.2.0-30-generic-pae firmware=N/A latency=0 link=no multicast=yes wireless=IEEE 802.11bg resurser: irq:18 memory:fa000000-fa00ffff lspci -nnn | grep Ethernet: 04:00.0 Ethernet controller [0200]: Marvell Technology Group Ltd. 88E8055 PCI-E Gigabit Ethernet Controller [11ab:4363] (rev 14) 06:00.0 Ethernet controller [0200]: Atheros Communications Inc. AR242x / AR542x Wireless Network Adapter (PCI-Express) [168c:001c] (rev 04) lsusb: Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 002: ID 05e3:0715 Genesys Logic, Inc. USB 2.0 microSD Reader Bus 001 Device 003: ID 05c8:0103 Cheng Uei Precision Industry Co., Ltd (Foxlink) FO13FF-65 PC-CAM iwlist wlan0 scanning: rfkill list: 0: phy0: Wireless LAN Soft blocked: no Hard blocked: yes ping -c 5 google.com: PING google.com (173.194.32.34) 56(84) bytes of data. 64 bytes from arn06s02-in-f2.1e100.net (173.194.32.34): icmp_req=1 ttl=55 time=10.6 ms 64 bytes from arn06s02-in-f2.1e100.net (173.194.32.34): icmp_req=2 ttl=55 time=10.5 ms 64 bytes from arn06s02-in-f2.1e100.net (173.194.32.34): icmp_req=3 ttl=55 time=10.4 ms 64 bytes from arn06s02-in-f2.1e100.net (173.194.32.34): icmp_req=4 ttl=55 time=10.4 ms 64 bytes from arn06s02-in-f2.1e100.net (173.194.32.34): icmp_req=5 ttl=55 time=10.4 ms --- google.com ping statistics --- 5 packets transmitted, 5 received, 0% packet loss, time 4004ms rtt min/avg/max/mdev = 10.451/10.517/10.631/0.062 ms host google.com 8.8.8.8: Using domain server: Name: 8.8.8.8 Address: 8.8.8.8#53 Aliases: google.com has address 173.194.32.36 google.com has address 173.194.32.38 google.com has address 173.194.32.41 google.com has address 173.194.32.37 google.com has address 173.194.32.35 google.com has address 173.194.32.39 google.com has address 173.194.32.33 google.com has address 173.194.32.34 google.com has address 173.194.32.46 google.com has address 173.194.32.32 google.com has address 173.194.32.40 google.com has IPv6 address 2a00:1450:400f:801::100e google.com mail is handled by 40 alt3.aspmx.l.google.com. google.com mail is handled by 20 alt1.aspmx.l.google.com. google.com mail is handled by 30 alt2.aspmx.l.google.com. google.com mail is handled by 50 alt4.aspmx.l.google.com. google.com mail is handled by 10 aspmx.l.google.com. lsb_release -a: Distributor ID: Ubuntu Description: Ubuntu 12.04.1 LTS Release: 12.04 Codename: precise uname -a: Linux ellikas 3.2.0-30-generic-pae #48-Ubuntu SMP Fri Aug 24 17:14:09 UTC 2012 i686 i686 i386 GNU/Linux ellika@ellikas:~$ ellika@ellikas:~$ clear ellika@ellikas:~$ echo -e "sudo lshw --class network:\n\n$(sudo lshw -c network)\n\nlspci -nnn | grep Ethernet:\n\n$(lspci -nnn | grep Ethernet)\n\nlsusb:\n\n$(lsusb)\n\niwlist wlan0 scanning:\n\n$(iwlist wlan0 scanning)\n\nrfkill list:\n\n$(rfkill list)\n\nping -c 5 google.com:\n\n$(ping -c 5 google.com)\n\nhost google.com 8.8.8.8:\n\n$(host google.com 8.8.8.8)\n\nlsb_release -a:\n\n$(lsb_release -a)\n\nuname -a:\n\n$(uname -a)" wlan0 Failed to read scan data : Network is down No LSB modules are available. sudo lshw --class network: *-network beskrivning: Ethernet interface produkt: 88E8055 PCI-E Gigabit Ethernet Controller tillverkare: Marvell Technology Group Ltd. physical id: 0 bus info: pci@0000:04:00.0 logiskt namn: eth0 version: 14 serienummer: 00:1e:33:00:96:9a storlek: 100Mbit/s kapacitet: 1Gbit/s bredd: 64 bits klocka: 33MHz förmågor: pm vpd msi pciexpress bus_master cap_list rom ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation konfiguration: autonegotiation=on broadcast=yes driver=sky2 driverversion=1.30 duplex=full firmware=N/A ip=192.168.1.26 latency=0 link=yes multicast=yes port=twisted pair speed=100Mbit/s resurser: irq:44 memory:f8000000-f8003fff ioport:3000(storlek=256) memory:f2000000-f201ffff *-network INAKTIVERAD beskrivning: Trådlöst gränssnitt produkt: AR242x / AR542x Wireless Network Adapter (PCI-Express) tillverkare: Atheros Communications Inc. physical id: 0 bus info: pci@0000:06:00.0 logiskt namn: wlan0 version: 04 serienummer: 00:22:5f:3f:63:76 bredd: 64 bits klocka: 33MHz förmågor: pm msi pciexpress msix bus_master cap_list ethernet physical wireless konfiguration: broadcast=yes driver=ath5k driverversion=3.2.0-30-generic-pae firmware=N/A latency=0 link=no multicast=yes wireless=IEEE 802.11bg resurser: irq:18 memory:fa000000-fa00ffff lspci -nnn | grep Ethernet: 04:00.0 Ethernet controller [0200]: Marvell Technology Group Ltd. 88E8055 PCI-E Gigabit Ethernet Controller [11ab:4363] (rev 14) 06:00.0 Ethernet controller [0200]: Atheros Communications Inc. AR242x / AR542x Wireless Network Adapter (PCI-Express) [168c:001c] (rev 04) lsusb: Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 002: ID 05e3:0715 Genesys Logic, Inc. USB 2.0 microSD Reader Bus 001 Device 003: ID 05c8:0103 Cheng Uei Precision Industry Co., Ltd (Foxlink) FO13FF-65 PC-CAM iwlist wlan0 scanning: rfkill list: 0: phy0: Wireless LAN Soft blocked: no Hard blocked: yes ping -c 5 google.com: PING google.com (173.194.32.34) 56(84) bytes of data. 64 bytes from arn06s02-in-f2.1e100.net (173.194.32.34): icmp_req=1 ttl=55 time=10.6 ms 64 bytes from arn06s02-in-f2.1e100.net (173.194.32.34): icmp_req=2 ttl=55 time=10.5 ms 64 bytes from arn06s02-in-f2.1e100.net (173.194.32.34): icmp_req=3 ttl=55 time=10.4 ms 64 bytes from arn06s02-in-f2.1e100.net (173.194.32.34): icmp_req=4 ttl=55 time=10.4 ms 64 bytes from arn06s02-in-f2.1e100.net (173.194.32.34): icmp_req=5 ttl=55 time=10.5 ms --- google.com ping statistics --- 5 packets transmitted, 5 received, 0% packet loss, time 4004ms rtt min/avg/max/mdev = 10.476/10.522/10.602/0.045 ms host google.com 8.8.8.8: Using domain server: Name: 8.8.8.8 Address: 8.8.8.8#53 Aliases: google.com has address 173.194.32.36 google.com has address 173.194.32.38 google.com has address 173.194.32.41 google.com has address 173.194.32.37 google.com has address 173.194.32.35 google.com has address 173.194.32.39 google.com has address 173.194.32.33 google.com has address 173.194.32.34 google.com has address 173.194.32.46 google.com has address 173.194.32.32 google.com has address 173.194.32.40 google.com has IPv6 address 2a00:1450:400f:801::100e google.com mail is handled by 40 alt3.aspmx.l.google.com. google.com mail is handled by 20 alt1.aspmx.l.google.com. google.com mail is handled by 30 alt2.aspmx.l.google.com. google.com mail is handled by 50 alt4.aspmx.l.google.com. google.com mail is handled by 10 aspmx.l.google.com. lsb_release -a: Distributor ID: Ubuntu Description: Ubuntu 12.04.1 LTS Release: 12.04 Codename: precise uname -a: Linux ellikas 3.2.0-30-generic-pae #48-Ubuntu SMP Fri Aug 24 17:14:09 UTC 2012 i686 i686 i386 GNU/Linux

  Read the article

• System wide Proxy settings when on a windows network with a password

  - by sav

  I'm using Ubuntu on a windows network. I want to connect to the world wide web. I have followed the steps here which I have found very useful. However when I try to ping a website (eg: ping www.wikipedia.org) I get no reply. I can ping local computers on my network, but I need to go through our proxy to get to the world wide web. I can even browse wikipedia using firefox, I just needed to enter the proxy configuration script location and my username and password. I'm quite sure the reason I'm having this trouble is because I havn't entered a username and password. I'm not sure how to do this on a system wide level. ultimately I would like to be able to use package managers like synaptic but first I need them to be able to connect to the internet. EDIT As sugested I created a /etc/apt/apt.conf file like Acquire::http::Proxy "http://chrisav:[email protected]:8080"; Acquire::https::Proxy "https://chrisav:[email protected]:8080"; Acquire::ftp::Proxy "ftp://chrisav:[email protected]:8080"; Acquire::socks::Proxy "socks://chrisav:[email protected]:8080"; However I still cant ping wikipedia when I try installing stuff I get chris@chris-Ubuntu:~$ sudo apt-get install kate Reading package lists... Done Building dependency tree Reading state information... Done E: Unable to locate package kate

  Read the article

• Windows domain full hostnames cannot be resolved resulting in intranet not working

  - by OpethR

  the domain: is foo.bar.local full hostname is: bla.foo.bar.local short hostname is: bla I installed winbind. here is my smb.conf: name resolve order = lmhosts host wins bcast here is my nsswitch.conf: hosts: files mdns4_minimal [NOTFOUND=return] dns wins mdns4 when I try to ping full hostname, I get: "ping: unknown host" when I ping short hostname it works and shows me PING bla.foo.bar.local (10.11.20.135) 56(84) bytes of data. 64 bytes from bla.foo.bar.local (10.11.20.135): icmp_req=1 ttl=62 time=49.7 ms *notice that it manages to get the full hostname!? :S now the only reason I need it is cuz I'm trying to reach intranet websites. when I type short hostname "bla" in firefox address bar, it automatically changes it to the full hostname (which is good, right?!) but then it says: Server not found Firefox can't find the server at bla.foo.bar.local. what am I doing wrong? it's driving me nutz. so if you are wandering then yes, it is company intranet I'm trying to reach from ubuntu. If I use my crappy winxp everything is working perfectly well.

  Read the article

• Mount - Unable to find suitable address

  - by Benny

  I am trying to mount my Windows share through my Ubuntu box (no xwindow), but I continue to get Unable to find suitable address I have tried using the raw IP address, I have checked the credentials, I have disabled the Windows firewall, but I cannot find anything wrong. benny@backup:~$ sudo mount -t cifs //my-desk/j -o username=me,password=s)mePasss /mnt/sync Unable to find suitable address. benny@backup:~$ ping my-desk PING my-desk (10.10.10.43) 56(84) bytes of data. ? --- my-desk ping statistics --- 2 packets transmitted, 0 received, 100% packet loss, time 1008ms benny@backup:~$ sudo mount -t cifs //10.10.10.43/j -o username=me,password=s)mePasss /mnt/sync Unable to find suitable address. Any help would be greatly appreciated!

  Read the article

• Can't load some domain

  - by Grzegorz

  I can't load some domain on my ubuntu 13.04: youtube.com translate.google.com drive.google.com vk.com When I ping them they are responding: PING youtube.com (217.119.79.59) 56(84) bytes of data. 64 bytes from non-registered.plix.pl (217.119.79.59): icmp_req=1 ttl=59 time=21.9 ms 64 bytes from non-registered.plix.pl (217.119.79.59): icmp_req=2 ttl=59 time=20.5 ms 64 bytes from non-registered.plix.pl (217.119.79.59): icmp_req=3 ttl=59 time=21.3 ms --- youtube.com ping statistics --- 3 packets transmitted, 3 received, 0% packet loss, time 2002ms rtt min/avg/max/mdev = 20.544/21.255/21.914/0.560 ms But they don't load in any browser like firefox, chrome, lynx. They load in my media centre on XBMCbuntu.

  Read the article

• java.net.SocketException: Connection reset; No available router to destination

  - by adejuanc

  Sometimes a Weblogic Server will be unreachable, there could be several reasons, the server is hang, down, and thus not responding to a ping, or it could be related to a network issue.A possible point of failure in the network layer are firewalls. You should contact your network team if you have following messages: java weblogic.Admin -adminurl t3://adminServer.mydomain.com:7777 -username admin -password lockdown PINGFailed to connect to t3://adminServer.mydomain.com:7777: Destination unreachable; nested exception is:java.net.SocketException: Connection reset; No available router to destination A possible work around for the ping command is to use the HTTP protocol, instead of the t3 protocol. To enable this you must configure WebLogic to do HTTP tunneling. To enable, access the administration console, click servers-> server you want to reach-> protocols -> http -> enable Tunneling. no restart is necessary. And then, following command will work: java weblogic.Admin -adminurl http://adminServer.mydomain.com:7777 -username igmadmin -password l0ckdown PING

  Read the article

• Wired connection stops working suddenly

  - by user90950

  I have Ubuntu 12.04.I was downloading something via aria..and then it suddenly stopped..no connection to Internet. I tried to ping the host but no reply..also tried to ping the route 192.168.250.1 but no reply got a message saying 'Ubuntu 12.04 has experienced internal error'. I restarted system but nothing is sorted out. The wired connection 'establishes' but I am not able to use Internet or ping either to host/route/8.8.8.8. The wireless is working fine and it does connect to Internet. I have a static IP address for wired connection and it does connect to Internet on Windows OS installed on this same Laptop with same IP settings.. please suggest how do i get my wired connection start working properly again..

  Read the article

• Network outside internal not reaching TMG Forefront 2010 (Hyper-V environment)

  - by Pascal

  Below is my environment: I have 1 physical machine running Windows 2008 R2, with the Hyper-V role. This machine has 3 physical NICs: One for Internet One for Internal Network One for Wireless Network All 3 have their respective Virtual Networks in Hyper-V, and I have an extra Private virutal machine network for a DMZ Network. In one of the virtual machines, I have TMG Forefront 2010 SP1 installed, with all 4 networks available to it. Below is the IPCONFIG /ALL at the firewall: Windows IP Configuration Host Name . . . . . . . . . . . . : FRW-EXP1-02 Primary Dns Suffix . . . . . . . : exp1.eti.br Node Type . . . . . . . . . . . . : Hybrid IP Routing Enabled. . . . . . . . : Yes WINS Proxy Enabled. . . . . . . . : No DNS Suffix Search List. . . . . . : exp1.eti.br Ethernet adapter Internet: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Microsoft Virtual Machine Bus Network Adapter #4 Physical Address. . . . . . . . . : 00-15-5D-01-06-0E DHCP Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes Link-local IPv6 Address . . . . . : fe80::6d05:6033:4cfc:bdf5%15(Preferred) IPv4 Address. . . . . . . . . . . : 189.100.110.xxx(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.240.0 Lease Obtained. . . . . . . . . . : quarta-feira, 5 de janeiro de 2011 11:17:24 Lease Expires . . . . . . . . . . : quarta-feira, 5 de janeiro de 2011 16:07:02 Default Gateway . . . . . . . . . : 189.100.96.xxx DHCP Server . . . . . . . . . . . : 201.6.2.43 DHCPv6 IAID . . . . . . . . . . . : 436213085 DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-14-6D-75-6F-00-15-5D-01-06-0B DNS Servers . . . . . . . . . . . : 201.6.2.163 201.6.2.43 NetBIOS over Tcpip. . . . . . . . : Enabled Ethernet adapter Rede Interna: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Microsoft Virtual Machine Bus Network Adapter #3 Physical Address. . . . . . . . . : 00-15-5D-01-06-0C DHCP Enabled. . . . . . . . . . . : No Autoconfiguration Enabled . . . . : Yes Link-local IPv6 Address . . . . . : fe80::51ff:4723:ce4c:bbc3%14(Preferred) IPv4 Address. . . . . . . . . . . : 10.50.75.10(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : DHCPv6 IAID . . . . . . . . . . . : 352327005 DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-14-6D-75-6F-00-15-5D-01-06-0B DNS Servers . . . . . . . . . . . : 10.50.75.1 10.50.75.2 NetBIOS over Tcpip. . . . . . . . : Enabled Ethernet adapter DMZ: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Microsoft Virtual Machine Bus Network Adapter #2 Physical Address. . . . . . . . . : 00-15-5D-01-06-0A DHCP Enabled. . . . . . . . . . . : No Autoconfiguration Enabled . . . . : Yes Link-local IPv6 Address . . . . . : fe80::d4c5:75cf:e9aa:73e1%13(Preferred) IPv4 Address. . . . . . . . . . . : 192.168.10.1(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : DHCPv6 IAID . . . . . . . . . . . : 301995357 DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-14-6D-75-6F-00-15-5D-01-06-0B DNS Servers . . . . . . . . . . . : fec0:0:0:ffff::1%1 fec0:0:0:ffff::2%1 fec0:0:0:ffff::3%1 NetBIOS over Tcpip. . . . . . . . : Enabled Ethernet adapter Wireless: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Microsoft Virtual Machine Bus Network Adapter Physical Address. . . . . . . . . : 00-15-5D-01-06-0B DHCP Enabled. . . . . . . . . . . : No Autoconfiguration Enabled . . . . : Yes Link-local IPv6 Address . . . . . : fe80::459:8ca6:d02:8da1%11(Preferred) IPv4 Address. . . . . . . . . . . : 192.168.1.10(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : DHCPv6 IAID . . . . . . . . . . . : 234886493 DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-14-6D-75-6F-00-15-5D-01-06-0B DNS Servers . . . . . . . . . . . : fec0:0:0:ffff::1%1 fec0:0:0:ffff::2%1 fec0:0:0:ffff::3%1 NetBIOS over Tcpip. . . . . . . . : Enabled I have the Networks below at Forefront: External: IP addresses external to the Forefront TMG Networks Internal: 10.50.75.0 - 10.50.75.255 Local Host: Perimiter: 192.168.10.0 - 192.168.10.255 Wireless: 192.168.1.0 - 192.168.1.255 In the Networks Rules, I have: 1 => Route => Local Host => All Networks 2 => Route => Quarantined; VPN => Internal 3 => NAT => Internal; VPN => Perimiter 4 => NAT => Internal; Perimiter; Quarantined; VPN; Wireless => External My problem is that I can only communicate with the Internal and External networks. If a ping www.google.com or 10.50.75.21 from the Forefront VM, I get answer backs without a problem. If I try to ping a machine at the Perimiter network or the Wireless network, it doesn't get routed back to Forefront, and it's the default gateway on all Networks. Here as ping samples: PS C:\Users\Administrator.TPB1> ping www.google.com Pinging www.l.google.com [64.233.163.104] with 32 bytes of data: Reply from 64.233.163.104: bytes=32 time=11ms TTL=58 Reply from 64.233.163.104: bytes=32 time=8ms TTL=58 Ping statistics for 64.233.163.104: Packets: Sent = 2, Received = 2, Lost = 0 (0% loss), Approximate round trip times in milli-seconds: Minimum = 8ms, Maximum = 11ms, Average = 9ms Control-C PS C:\Users\Administrator.TPB1> ping 10.50.75.21 Pinging 10.50.75.21 with 32 bytes of data: Reply from 10.50.75.21: bytes=32 time=1ms TTL=128 Reply from 10.50.75.21: bytes=32 time=1ms TTL=128 Reply from 10.50.75.21: bytes=32 time=1ms TTL=128 Reply from 10.50.75.21: bytes=32 time=1ms TTL=128 Ping statistics for 10.50.75.21: Packets: Sent = 4, Received = 4, Lost = 0 (0% loss), Approximate round trip times in milli-seconds: Minimum = 1ms, Maximum = 1ms, Average = 1ms PS C:\Users\Administrator.TPB1> ping 192.168.10.3 Pinging 192.168.10.3 with 32 bytes of data: Reply from 192.168.10.1: Destination host unreachable. Request timed out. Request timed out. Request timed out. Ping statistics for 192.168.10.3: Packets: Sent = 4, Received = 1, Lost = 3 (75% loss), PS C:\Users\Administrator.TPB1> The ping to the 192.168.10.3 gets the Destination host unreachable. Below is the ipconfig for the perimiter VM: PS C:\Users\Administrator.Administrator> ipconfig /all Windows IP Configuration Host Name . . . . . . . . . . . . : app-exp1-02 Primary Dns Suffix . . . . . . . : Node Type . . . . . . . . . . . . : Unkown IP Routing Enabled. . . . . . . . : No WINS Proxy Enabled. . . . . . . . : No Ethernet adapter Local Area Connection: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Microsoft Virtual Machine Bus Network Adapter Physical Address. . . . . . . . . : 00-15-5D-01-06-08 DHCP Enabled. . . . . . . . . . . : No IPv4 Address. . . . . . . . . . . : 192.168.10.3 Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : 192.168.10.1 DNS Servers . . . . . . . . . . . : 201.6.2.163 201.6.2.43 Trying to ping 192.168.10.1 ( the gateway ) from the DMZ machine also does not work. When I use Log & Reports to monitor packets from Wireless network and Perimiter network, I don't get any packets link PING or HTTP that I try to send. But I do get a lot of spoofing messages for NETBIOS broadcasts... it's like Forefront thinks it's coming from a different network, but I don't know why. Please Help! Tks

  Read the article

• Cannot determine ethernet address for proxy ARP on PPTP

  - by Linux Intel

  I installed pptp server on a centos 6 64bit server PPTP Server ip : 55.66.77.10 PPTP Local ip : 10.0.0.1 Client1 IP : 10.0.0.60 centos 5 64bit Client2 IP : 10.0.0.61 centos5 64bit PPTP Server can ping Client1 And client 1 can ping PPTP Server PPTP Server can ping Client2 And client 2 can ping PPTP Server The problem is client 1 can not ping Client 2 and i get this error also on PPTP server error log Cannot determine ethernet address for proxy ARP Ping from Client2 to Client1 PING 10.0.0.60 (10.0.0.60) 56(84) bytes of data. --- 10.0.0.60 ping statistics --- 6 packets transmitted, 0 received, 100% packet loss, time 5000ms route -n on PPTP Server Destination Gateway Genmask Flags Metric Ref Use Iface 10.0.0.60 0.0.0.0 255.255.255.255 UH 0 0 0 ppp0 10.0.0.61 0.0.0.0 255.255.255.255 UH 0 0 0 ppp1 55.66.77.10 0.0.0.0 255.255.255.248 U 0 0 0 eth0 10.0.0.0 0.0.0.0 255.0.0.0 U 0 0 0 eth0 0.0.0.0 55.66.77.19 0.0.0.0 UG 0 0 0 eth0 route -n On Client 1 Destination Gateway Genmask Flags Metric Ref Use Iface 10.0.0.1 0.0.0.0 255.255.255.255 UH 0 0 0 ppp0 55.66.77.10 70.14.13.19 255.255.255.255 UGH 0 0 0 eth0 10.0.0.0 0.0.0.0 255.0.0.0 U 0 0 0 eth1 0.0.0.0 70.14.13.19 0.0.0.0 UG 0 0 0 eth0 route -n On Client 2 Destination Gateway Genmask Flags Metric Ref Use Iface 10.0.0.1 0.0.0.0 255.255.255.255 UH 0 0 0 ppp0 55.66.77.10 84.56.120.60 255.255.255.255 UGH 0 0 0 eth1 10.0.0.0 0.0.0.0 255.0.0.0 U 0 0 0 eth0 0.0.0.0 84.56.120.60 0.0.0.0 UG 0 0 0 eth1 cat /etc/ppp/options.pptpd on PPTP server ############################################################################### # $Id: options.pptpd,v 1.11 2005/12/29 01:21:09 quozl Exp $ # # Sample Poptop PPP options file /etc/ppp/options.pptpd # Options used by PPP when a connection arrives from a client. # This file is pointed to by /etc/pptpd.conf option keyword. # Changes are effective on the next connection. See "man pppd". # # You are expected to change this file to suit your system. As # packaged, it requires PPP 2.4.2 and the kernel MPPE module. ############################################################################### # Authentication # Name of the local system for authentication purposes # (must match the second field in /etc/ppp/chap-secrets entries) name pptpd # Strip the domain prefix from the username before authentication. # (applies if you use pppd with chapms-strip-domain patch) #chapms-strip-domain # Encryption # (There have been multiple versions of PPP with encryption support, # choose with of the following sections you will use.) # BSD licensed ppp-2.4.2 upstream with MPPE only, kernel module ppp_mppe.o # {{{ refuse-pap refuse-chap refuse-mschap # Require the peer to authenticate itself using MS-CHAPv2 [Microsoft # Challenge Handshake Authentication Protocol, Version 2] authentication. require-mschap-v2 # Require MPPE 128-bit encryption # (note that MPPE requires the use of MSCHAP-V2 during authentication) require-mppe-128 # }}} # OpenSSL licensed ppp-2.4.1 fork with MPPE only, kernel module mppe.o # {{{ #-chap #-chapms # Require the peer to authenticate itself using MS-CHAPv2 [Microsoft # Challenge Handshake Authentication Protocol, Version 2] authentication. #+chapms-v2 # Require MPPE encryption # (note that MPPE requires the use of MSCHAP-V2 during authentication) #mppe-40 # enable either 40-bit or 128-bit, not both #mppe-128 #mppe-stateless # }}} # Network and Routing # If pppd is acting as a server for Microsoft Windows clients, this # option allows pppd to supply one or two DNS (Domain Name Server) # addresses to the clients. The first instance of this option # specifies the primary DNS address; the second instance (if given) # specifies the secondary DNS address. #ms-dns 10.0.0.1 #ms-dns 10.0.0.2 # If pppd is acting as a server for Microsoft Windows or "Samba" # clients, this option allows pppd to supply one or two WINS (Windows # Internet Name Services) server addresses to the clients. The first # instance of this option specifies the primary WINS address; the # second instance (if given) specifies the secondary WINS address. #ms-wins 10.0.0.3 #ms-wins 10.0.0.4 # Add an entry to this system's ARP [Address Resolution Protocol] # table with the IP address of the peer and the Ethernet address of this # system. This will have the effect of making the peer appear to other # systems to be on the local ethernet. # (you do not need this if your PPTP server is responsible for routing # packets to the clients -- James Cameron) proxyarp # Normally pptpd passes the IP address to pppd, but if pptpd has been # given the delegate option in pptpd.conf or the --delegate command line # option, then pppd will use chap-secrets or radius to allocate the # client IP address. The default local IP address used at the server # end is often the same as the address of the server. To override this, # specify the local IP address here. # (you must not use this unless you have used the delegate option) #10.8.0.100 # Logging # Enable connection debugging facilities. # (see your syslog configuration for where pppd sends to) debug # Print out all the option values which have been set. # (often requested by mailing list to verify options) #dump # Miscellaneous # Create a UUCP-style lock file for the pseudo-tty to ensure exclusive # access. lock # Disable BSD-Compress compression nobsdcomp # Disable Van Jacobson compression # (needed on some networks with Windows 9x/ME/XP clients, see posting to # poptop-server on 14th April 2005 by Pawel Pokrywka and followups, # http://marc.theaimsgroup.com/?t=111343175400006&r=1&w=2 ) novj novjccomp # turn off logging to stderr, since this may be redirected to pptpd, # which may trigger a loopback nologfd # put plugins here # (putting them higher up may cause them to sent messages to the pty) cat /etc/ppp/options.pptp on Client1 and Client2 ############################################################################### # $Id: options.pptp,v 1.3 2006/03/26 23:11:05 quozl Exp $ # # Sample PPTP PPP options file /etc/ppp/options.pptp # Options used by PPP when a connection is made by a PPTP client. # This file can be referred to by an /etc/ppp/peers file for the tunnel. # Changes are effective on the next connection. See "man pppd". # # You are expected to change this file to suit your system. As # packaged, it requires PPP 2.4.2 or later from http://ppp.samba.org/ # and the kernel MPPE module available from the CVS repository also on # http://ppp.samba.org/, which is packaged for DKMS as kernel_ppp_mppe. ############################################################################### # Lock the port lock # Authentication # We don't need the tunnel server to authenticate itself noauth # We won't do PAP, EAP, CHAP, or MSCHAP, but we will accept MSCHAP-V2 # (you may need to remove these refusals if the server is not using MPPE) refuse-pap refuse-eap refuse-chap refuse-mschap # Compression # Turn off compression protocols we know won't be used nobsdcomp nodeflate # Encryption # (There have been multiple versions of PPP with encryption support, # choose which of the following sections you will use. Note that MPPE # requires the use of MSCHAP-V2 during authentication) # # Note that using PPTP with MPPE and MSCHAP-V2 should be considered # insecure: # http://marc.info/?l=pptpclient-devel&m=134372640219039&w=2 # https://github.com/moxie0/chapcrack/blob/master/README.md # http://technet.microsoft.com/en-us/security/advisory/2743314 # http://ppp.samba.org/ the PPP project version of PPP by Paul Mackarras # ppp-2.4.2 or later with MPPE only, kernel module ppp_mppe.o # If the kernel is booted in FIPS mode (fips=1), the ppp_mppe.ko module # is not allowed and PPTP-MPPE is not available. # {{{ # Require MPPE 128-bit encryption #require-mppe-128 # }}} # http://mppe-mppc.alphacron.de/ fork from PPP project by Jan Dubiec # ppp-2.4.2 or later with MPPE and MPPC, kernel module ppp_mppe_mppc.o # {{{ # Require MPPE 128-bit encryption #mppe required,stateless # }}} IPtables is stopped on clients and server, Also net.ipv4.ip_forward = 1 is enabled on PPTP Server. How can i solve this problem .?

  Read the article

• Help analyzing traceroute

  - by Abdulla

  Hello, my name is Abdulla and I'm from Kuwait. Sorry for my question as I know its not technically challenging. I'm facing some problems with my internet connection. My company has a DSL 2mb connection. My main problem is latency, in the morning its good but after that its gets really bad. My Internet provider says there's nothing wrong and that everything is working perfectly. I tried to explain to them the latency issue but they say that as long as I'm getting the download speed there isn't anything I can do about it. I only want to know if this is true and that the company can't do anything before I change my internet provider, as I feel that the guys at the contact center might getting back to me without asking tech support. Below are 2 traces I made, one in the morning and the other in the afternoon: This was taken around 17:00 Microsoft Windows XP [Version 5.1.2600] (C) Copyright 1985-2001 Microsoft Corp. C:\Documents and Settings\Administrator>ping google.com Pinging google.com [66.102.9.104] with 32 bytes of data: Reply from 66.102.9.104: bytes=32 time=387ms TTL=49 Reply from 66.102.9.104: bytes=32 time=388ms TTL=49 Reply from 66.102.9.104: bytes=32 time=375ms TTL=49 Reply from 66.102.9.104: bytes=32 time=375ms TTL=49 Ping statistics for 66.102.9.104: Packets: Sent = 4, Received = 4, Lost = 0 (0% loss), Approximate round trip times in milli-seconds: Minimum = 375ms, Maximum = 388ms, Average = 381ms C:\Documents and Settings\Administrator>ping google.com /t Pinging google.com [66.102.9.104] with 32 bytes of data: Reply from 66.102.9.104: bytes=32 time=376ms TTL=49 Reply from 66.102.9.104: bytes=32 time=382ms TTL=49 Reply from 66.102.9.104: bytes=32 time=371ms TTL=49 Reply from 66.102.9.104: bytes=32 time=378ms TTL=49 Reply from 66.102.9.104: bytes=32 time=374ms TTL=49 Reply from 66.102.9.104: bytes=32 time=371ms TTL=49 Reply from 66.102.9.104: bytes=32 time=365ms TTL=49 Reply from 66.102.9.104: bytes=32 time=366ms TTL=49 Reply from 66.102.9.104: bytes=32 time=353ms TTL=49 Reply from 66.102.9.104: bytes=32 time=331ms TTL=49 Reply from 66.102.9.104: bytes=32 time=333ms TTL=49 Reply from 66.102.9.104: bytes=32 time=348ms TTL=49 Reply from 66.102.9.104: bytes=32 time=365ms TTL=49 Reply from 66.102.9.104: bytes=32 time=346ms TTL=49 Reply from 66.102.9.104: bytes=32 time=335ms TTL=49 Reply from 66.102.9.104: bytes=32 time=340ms TTL=49 Reply from 66.102.9.104: bytes=32 time=344ms TTL=49 Reply from 66.102.9.104: bytes=32 time=333ms TTL=49 Reply from 66.102.9.104: bytes=32 time=328ms TTL=49 Reply from 66.102.9.104: bytes=32 time=332ms TTL=49 Reply from 66.102.9.104: bytes=32 time=326ms TTL=49 Reply from 66.102.9.104: bytes=32 time=333ms TTL=49 Reply from 66.102.9.104: bytes=32 time=325ms TTL=49 Reply from 66.102.9.104: bytes=32 time=333ms TTL=49 Reply from 66.102.9.104: bytes=32 time=338ms TTL=49 Reply from 66.102.9.104: bytes=32 time=341ms TTL=49 Ping statistics for 66.102.9.104: Packets: Sent = 26, Received = 26, Lost = 0 (0% loss), Approximate round trip times in milli-seconds: Minimum = 325ms, Maximum = 382ms, Average = 348ms Control-C ^C C:\Documents and Settings\Administrator>travert google.com 'travert' is not recognized as an internal or external command, operable program or batch file. C:\Documents and Settings\Administrator>tracert google.com Tracing route to google.com [66.102.9.104] over a maximum of 30 hops: 1 <1 ms <1 ms <1 ms 192.168.0.1 2 6 ms 6 ms 6 ms 80-184-31-1.adsl.kems.net [80.184.31.1] 3 7 ms 7 ms 8 ms 168.187.0.226 4 7 ms 8 ms 9 ms 168.187.0.125 5 180 ms 187 ms 188 ms if-11-2.core1.RSD-Riyad.as6453.net [116.0.78.89] 6 209 ms 222 ms 204 ms 195.219.167.57 7 541 ms 536 ms 540 ms 195.219.167.42 8 553 ms 552 ms 538 ms Vlan1102.icore1.PVU-Paris.as6453.net [195.219.24 1.109] 9 547 ms 543 ms 542 ms xe-9-1-0.edge4.paris1.level3.net [4.68.110.213] 10 540 ms 523 ms 531 ms ae-33-51.ebr1.Paris1.Level3.net [4.69.139.193] 11 755 ms 761 ms 695 ms ae-45-45.ebr1.London1.Level3.net [4.69.143.101] 12 271 ms 263 ms 400 ms ae-11-51.car1.London1.Level3.net [4.69.139.66] 13 701 ms 730 ms 742 ms 195.50.118.210 14 659 ms 641 ms 660 ms 209.85.255.76 15 280 ms 283 ms 292 ms 209.85.251.190 16 308 ms 293 ms 296 ms 72.14.232.239 17 679 ms 700 ms 721 ms 64.233.174.18 18 268 ms 281 ms 269 ms lm-in-f104.1e100.net [66.102.9.104] Trace complete. C:\Documents and Settings\Administrator> This was taken at 10:00am Microsoft Windows XP [Version 5.1.2600] (C) Copyright 1985-2001 Microsoft Corp. C:\Documents and Settings\Administrator>ping google.com Pinging google.com [66.102.9.106] with 32 bytes of data: Reply from 66.102.9.106: bytes=32 time=110ms TTL=49 Reply from 66.102.9.106: bytes=32 time=111ms TTL=49 Reply from 66.102.9.106: bytes=32 time=112ms TTL=49 Reply from 66.102.9.106: bytes=32 time=120ms TTL=49 Ping statistics for 66.102.9.106: Packets: Sent = 4, Received = 4, Lost = 0 (0% loss), Approximate round trip times in milli-seconds: Minimum = 110ms, Maximum = 120ms, Average = 113ms C:\Documents and Settings\Administrator>ping google.com /t Pinging google.com [66.102.9.106] with 32 bytes of data: Reply from 66.102.9.106: bytes=32 time=109ms TTL=49 Reply from 66.102.9.106: bytes=32 time=110ms TTL=49 Reply from 66.102.9.106: bytes=32 time=111ms TTL=49 Reply from 66.102.9.106: bytes=32 time=111ms TTL=49 Reply from 66.102.9.106: bytes=32 time=112ms TTL=49 Reply from 66.102.9.106: bytes=32 time=112ms TTL=49 Reply from 66.102.9.106: bytes=32 time=116ms TTL=49 Reply from 66.102.9.106: bytes=32 time=110ms TTL=49 Reply from 66.102.9.106: bytes=32 time=109ms TTL=49 Reply from 66.102.9.106: bytes=32 time=110ms TTL=49 Reply from 66.102.9.106: bytes=32 time=109ms TTL=49 Reply from 66.102.9.106: bytes=32 time=110ms TTL=49 Reply from 66.102.9.106: bytes=32 time=112ms TTL=49 Reply from 66.102.9.106: bytes=32 time=109ms TTL=49 Reply from 66.102.9.106: bytes=32 time=110ms TTL=49 Reply from 66.102.9.106: bytes=32 time=115ms TTL=49 Reply from 66.102.9.106: bytes=32 time=110ms TTL=49 Reply from 66.102.9.106: bytes=32 time=109ms TTL=49 Reply from 66.102.9.106: bytes=32 time=110ms TTL=49 Reply from 66.102.9.106: bytes=32 time=113ms TTL=49 Reply from 66.102.9.106: bytes=32 time=115ms TTL=49 Reply from 66.102.9.106: bytes=32 time=109ms TTL=49 Reply from 66.102.9.106: bytes=32 time=110ms TTL=49 Ping statistics for 66.102.9.106: Packets: Sent = 32, Received = 32, Lost = 0 (0% loss), Approximate round trip times in milli-seconds: Minimum = 109ms, Maximum = 135ms, Average = 112ms Control-C ^C C:\Documents and Settings\Administrator>tracert google.com Tracing route to google.com [66.102.9.104] over a maximum of 30 hops: 1 <1 ms <1 ms <1 ms 192.168.0.1 2 6 ms 6 ms 6 ms 80-184-31-1.adsl.kems.net [80.184.31.1] 3 8 ms 7 ms 6 ms 168.187.0.226 4 6 ms 7 ms 7 ms 168.187.0.125 5 20 ms 20 ms 18 ms if-11-2.core1.RSD-Riyad.as6453.net [116.0.78.89] 6 171 ms 205 ms 215 ms 195.219.167.57 7 191 ms 215 ms 226 ms 195.219.167.42 8 * 103 ms 94 ms Vlan1102.icore1.PVU-Paris.as6453.net [195.219.24 1.109] 9 94 ms 95 ms 97 ms xe-9-1-0.edge4.paris1.level3.net [4.68.110.213] 10 94 ms 94 ms 94 ms ae-33-51.ebr1.Paris1.Level3.net [4.69.139.193] 11 101 ms 101 ms 101 ms ae-48-48.ebr1.London1.Level3.net [4.69.143.113] 12 102 ms 102 ms 101 ms ae-11-51.car1.London1.Level3.net [4.69.139.66] 13 103 ms 102 ms 103 ms 195.50.118.210 14 137 ms 103 ms 100 ms 209.85.255.76 15 130 ms 124 ms 124 ms 209.85.251.190 16 114 ms 116 ms 116 ms 72.14.232.239 17 135 ms 113 ms 126 ms 64.233.174.18 18 126 ms 125 ms 127 ms lm-in-f104.1e100.net [66.102.9.104] Trace complete. C:\Documents and Settings\Administrator>

  Read the article

• Please bear with me, can someone analyze this trace route please

  - by Abdulla

  Hello, my name is Abdulla and I'm from Kuwait. Sorry for my question as I know its not technically challenging. I'm facing some problems with my internet connection while gaming, I have DSL 2mb connection. My main problem is latency, in the morning its good but after that its gets really bad. My internet provider says there's nothing wrong and that everything is working perfectly. I tried to explain to them the latency issue but they say that as long as I'm getting the download speed there isn't anything I can do about it. I only want to know if this is true and that the company can't do anything before I change my internet provider, as I feel that the guys at the contact center might getting back to me without asking tech support. Below are 2 traces I made, one in the morning and the other in the afternoon: This was taken around 17:00 Microsoft Windows XP [Version 5.1.2600] (C) Copyright 1985-2001 Microsoft Corp. C:\Documents and Settings\Administrator>ping google.com Pinging google.com [66.102.9.104] with 32 bytes of data: Reply from 66.102.9.104: bytes=32 time=387ms TTL=49 Reply from 66.102.9.104: bytes=32 time=388ms TTL=49 Reply from 66.102.9.104: bytes=32 time=375ms TTL=49 Reply from 66.102.9.104: bytes=32 time=375ms TTL=49 Ping statistics for 66.102.9.104: Packets: Sent = 4, Received = 4, Lost = 0 (0% loss), Approximate round trip times in milli-seconds: Minimum = 375ms, Maximum = 388ms, Average = 381ms C:\Documents and Settings\Administrator>ping google.com /t Pinging google.com [66.102.9.104] with 32 bytes of data: Reply from 66.102.9.104: bytes=32 time=376ms TTL=49 Reply from 66.102.9.104: bytes=32 time=382ms TTL=49 Reply from 66.102.9.104: bytes=32 time=371ms TTL=49 Reply from 66.102.9.104: bytes=32 time=378ms TTL=49 Reply from 66.102.9.104: bytes=32 time=374ms TTL=49 Reply from 66.102.9.104: bytes=32 time=371ms TTL=49 Reply from 66.102.9.104: bytes=32 time=365ms TTL=49 Reply from 66.102.9.104: bytes=32 time=366ms TTL=49 Reply from 66.102.9.104: bytes=32 time=353ms TTL=49 Reply from 66.102.9.104: bytes=32 time=331ms TTL=49 Reply from 66.102.9.104: bytes=32 time=333ms TTL=49 Reply from 66.102.9.104: bytes=32 time=348ms TTL=49 Reply from 66.102.9.104: bytes=32 time=365ms TTL=49 Reply from 66.102.9.104: bytes=32 time=346ms TTL=49 Reply from 66.102.9.104: bytes=32 time=335ms TTL=49 Reply from 66.102.9.104: bytes=32 time=340ms TTL=49 Reply from 66.102.9.104: bytes=32 time=344ms TTL=49 Reply from 66.102.9.104: bytes=32 time=333ms TTL=49 Reply from 66.102.9.104: bytes=32 time=328ms TTL=49 Reply from 66.102.9.104: bytes=32 time=332ms TTL=49 Reply from 66.102.9.104: bytes=32 time=326ms TTL=49 Reply from 66.102.9.104: bytes=32 time=333ms TTL=49 Reply from 66.102.9.104: bytes=32 time=325ms TTL=49 Reply from 66.102.9.104: bytes=32 time=333ms TTL=49 Reply from 66.102.9.104: bytes=32 time=338ms TTL=49 Reply from 66.102.9.104: bytes=32 time=341ms TTL=49 Ping statistics for 66.102.9.104: Packets: Sent = 26, Received = 26, Lost = 0 (0% loss), Approximate round trip times in milli-seconds: Minimum = 325ms, Maximum = 382ms, Average = 348ms Control-C ^C C:\Documents and Settings\Administrator>travert google.com 'travert' is not recognized as an internal or external command, operable program or batch file. C:\Documents and Settings\Administrator>tracert google.com Tracing route to google.com [66.102.9.104] over a maximum of 30 hops: 1 <1 ms <1 ms <1 ms 192.168.0.1 2 6 ms 6 ms 6 ms 80-184-31-1.adsl.kems.net [80.184.31.1] 3 7 ms 7 ms 8 ms 168.187.0.226 4 7 ms 8 ms 9 ms 168.187.0.125 5 180 ms 187 ms 188 ms if-11-2.core1.RSD-Riyad.as6453.net [116.0.78.89] 6 209 ms 222 ms 204 ms 195.219.167.57 7 541 ms 536 ms 540 ms 195.219.167.42 8 553 ms 552 ms 538 ms Vlan1102.icore1.PVU-Paris.as6453.net [195.219.24 1.109] 9 547 ms 543 ms 542 ms xe-9-1-0.edge4.paris1.level3.net [4.68.110.213] 10 540 ms 523 ms 531 ms ae-33-51.ebr1.Paris1.Level3.net [4.69.139.193] 11 755 ms 761 ms 695 ms ae-45-45.ebr1.London1.Level3.net [4.69.143.101] 12 271 ms 263 ms 400 ms ae-11-51.car1.London1.Level3.net [4.69.139.66] 13 701 ms 730 ms 742 ms 195.50.118.210 14 659 ms 641 ms 660 ms 209.85.255.76 15 280 ms 283 ms 292 ms 209.85.251.190 16 308 ms 293 ms 296 ms 72.14.232.239 17 679 ms 700 ms 721 ms 64.233.174.18 18 268 ms 281 ms 269 ms lm-in-f104.1e100.net [66.102.9.104] Trace complete. C:\Documents and Settings\Administrator> This was taken at 10:00am Microsoft Windows XP [Version 5.1.2600] (C) Copyright 1985-2001 Microsoft Corp. C:\Documents and Settings\Administrator>ping google.com Pinging google.com [66.102.9.106] with 32 bytes of data: Reply from 66.102.9.106: bytes=32 time=110ms TTL=49 Reply from 66.102.9.106: bytes=32 time=111ms TTL=49 Reply from 66.102.9.106: bytes=32 time=112ms TTL=49 Reply from 66.102.9.106: bytes=32 time=120ms TTL=49 Ping statistics for 66.102.9.106: Packets: Sent = 4, Received = 4, Lost = 0 (0% loss), Approximate round trip times in milli-seconds: Minimum = 110ms, Maximum = 120ms, Average = 113ms C:\Documents and Settings\Administrator>ping google.com /t Pinging google.com [66.102.9.106] with 32 bytes of data: Reply from 66.102.9.106: bytes=32 time=109ms TTL=49 Reply from 66.102.9.106: bytes=32 time=110ms TTL=49 Reply from 66.102.9.106: bytes=32 time=111ms TTL=49 Reply from 66.102.9.106: bytes=32 time=111ms TTL=49 Reply from 66.102.9.106: bytes=32 time=112ms TTL=49 Reply from 66.102.9.106: bytes=32 time=112ms TTL=49 Reply from 66.102.9.106: bytes=32 time=116ms TTL=49 Reply from 66.102.9.106: bytes=32 time=110ms TTL=49 Reply from 66.102.9.106: bytes=32 time=109ms TTL=49 Reply from 66.102.9.106: bytes=32 time=110ms TTL=49 Reply from 66.102.9.106: bytes=32 time=109ms TTL=49 Reply from 66.102.9.106: bytes=32 time=110ms TTL=49 Reply from 66.102.9.106: bytes=32 time=112ms TTL=49 Reply from 66.102.9.106: bytes=32 time=109ms TTL=49 Reply from 66.102.9.106: bytes=32 time=110ms TTL=49 Reply from 66.102.9.106: bytes=32 time=115ms TTL=49 Reply from 66.102.9.106: bytes=32 time=110ms TTL=49 Reply from 66.102.9.106: bytes=32 time=109ms TTL=49 Reply from 66.102.9.106: bytes=32 time=110ms TTL=49 Reply from 66.102.9.106: bytes=32 time=113ms TTL=49 Reply from 66.102.9.106: bytes=32 time=115ms TTL=49 Reply from 66.102.9.106: bytes=32 time=109ms TTL=49 Reply from 66.102.9.106: bytes=32 time=110ms TTL=49 Ping statistics for 66.102.9.106: Packets: Sent = 32, Received = 32, Lost = 0 (0% loss), Approximate round trip times in milli-seconds: Minimum = 109ms, Maximum = 135ms, Average = 112ms Control-C ^C C:\Documents and Settings\Administrator>tracert google.com Tracing route to google.com [66.102.9.104] over a maximum of 30 hops: 1 <1 ms <1 ms <1 ms 192.168.0.1 2 6 ms 6 ms 6 ms 80-184-31-1.adsl.kems.net [80.184.31.1] 3 8 ms 7 ms 6 ms 168.187.0.226 4 6 ms 7 ms 7 ms 168.187.0.125 5 20 ms 20 ms 18 ms if-11-2.core1.RSD-Riyad.as6453.net [116.0.78.89] 6 171 ms 205 ms 215 ms 195.219.167.57 7 191 ms 215 ms 226 ms 195.219.167.42 8 * 103 ms 94 ms Vlan1102.icore1.PVU-Paris.as6453.net [195.219.24 1.109] 9 94 ms 95 ms 97 ms xe-9-1-0.edge4.paris1.level3.net [4.68.110.213] 10 94 ms 94 ms 94 ms ae-33-51.ebr1.Paris1.Level3.net [4.69.139.193] 11 101 ms 101 ms 101 ms ae-48-48.ebr1.London1.Level3.net [4.69.143.113] 12 102 ms 102 ms 101 ms ae-11-51.car1.London1.Level3.net [4.69.139.66] 13 103 ms 102 ms 103 ms 195.50.118.210 14 137 ms 103 ms 100 ms 209.85.255.76 15 130 ms 124 ms 124 ms 209.85.251.190 16 114 ms 116 ms 116 ms 72.14.232.239 17 135 ms 113 ms 126 ms 64.233.174.18 18 126 ms 125 ms 127 ms lm-in-f104.1e100.net [66.102.9.104] Trace complete. C:\Documents and Settings\Administrator>

  Read the article

• debian lenny xen bridge networking problem

  - by Sasha

  DomU isn't talking to the world, but it talks to Dom0. Here are the tests that I made: Dom0 (external networking is working): ping 188.40.96.238 #Which is Domu's ip PING 188.40.96.238 (188.40.96.238) 56(84) bytes of data. 64 bytes from 188.40.96.238: icmp_seq=1 ttl=64 time=0.092 ms DomU: ping 188.40.96.215 #Which is Dom0's ip PING 188.40.96.215 (188.40.96.215) 56(84) bytes of data. 64 bytes from 188.40.96.215: icmp_seq=1 ttl=64 time=0.045 ms ping 188.40.96.193 #Which is the gateway - fail PING 188.40.96.193 (188.40.96.193) 56(84) bytes of data. ^C --- 188.40.96.193 ping statistics --- 2 packets transmitted, 0 received, 100% packet loss, time 1013ms The system is debian lenny with a normal setup. Here is my configs: uname -a Linux green0 2.6.26-2-xen-686 #1 SMP Wed Aug 19 08:47:57 UTC 2009 i686 GNU/Linux cat /etc/xen/green1.cfg |grep -v '#' kernel = '/boot/vmlinuz-2.6.26-2-xen-686' ramdisk = '/boot/initrd.img-2.6.26-2-xen-686' memory = '2000' root = '/dev/xvda2 ro' disk = [ 'file:/home/xen/domains/green1/swap.img,xvda1,w', 'file:/home/xen/domains/green1/disk.img,xvda2,w', ] name = 'green1' vif = [ 'ip=188.40.96.238,mac=00:16:3E:1F:C4:CC' ] on_poweroff = 'destroy' on_reboot = 'restart' on_crash = 'restart' ifconfig eth0 Link encap:Ethernet HWaddr 00:24:21:ef:2f:86 inet addr:188.40.96.215 Bcast:188.40.96.255 Mask:255.255.255.192 inet6 addr: fe80::224:21ff:feef:2f86/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:3296 errors:0 dropped:0 overruns:0 frame:0 TX packets:2204 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:262717 (256.5 KiB) TX bytes:330465 (322.7 KiB) lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) peth0 Link encap:Ethernet HWaddr 00:24:21:ef:2f:86 inet6 addr: fe80::224:21ff:feef:2f86/64 Scope:Link UP BROADCAST RUNNING PROMISC MULTICAST MTU:1500 Metric:1 RX packets:3407 errors:0 dropped:657431448 overruns:0 frame:0 TX packets:2291 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:319941 (312.4 KiB) TX bytes:338423 (330.4 KiB) Interrupt:16 Base address:0x8000 vif2.0 Link encap:Ethernet HWaddr fe:ff:ff:ff:ff:ff inet6 addr: fe80::fcff:ffff:feff:ffff/64 Scope:Link UP BROADCAST RUNNING PROMISC MULTICAST MTU:1500 Metric:1 RX packets:27 errors:0 dropped:0 overruns:0 frame:0 TX packets:151 errors:0 dropped:33 overruns:0 carrier:0 collisions:0 txqueuelen:32 RX bytes:1164 (1.1 KiB) TX bytes:20974 (20.4 KiB) ip a s 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo inet6 ::1/128 scope host valid_lft forever preferred_lft forever 2: peth0: <BROADCAST,MULTICAST,PROMISC,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UNKNOWN qlen 1000 link/ether 00:24:21:ef:2f:86 brd ff:ff:ff:ff:ff:ff inet6 fe80::224:21ff:feef:2f86/64 scope link valid_lft forever preferred_lft forever 4: vif0.0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN link/ether fe:ff:ff:ff:ff:ff brd ff:ff:ff:ff:ff:ff 5: veth0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN link/ether 00:00:00:00:00:00 brd ff:ff:ff:ff:ff:ff 6: vif0.1: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN link/ether fe:ff:ff:ff:ff:ff brd ff:ff:ff:ff:ff:ff 7: veth1: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN link/ether 00:00:00:00:00:00 brd ff:ff:ff:ff:ff:ff 8: vif0.2: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN link/ether fe:ff:ff:ff:ff:ff brd ff:ff:ff:ff:ff:ff 9: veth2: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN link/ether 00:00:00:00:00:00 brd ff:ff:ff:ff:ff:ff 10: vif0.3: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN link/ether fe:ff:ff:ff:ff:ff brd ff:ff:ff:ff:ff:ff 11: veth3: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN link/ether 00:00:00:00:00:00 brd ff:ff:ff:ff:ff:ff 12: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UNKNOWN link/ether 00:24:21:ef:2f:86 brd ff:ff:ff:ff:ff:ff inet 188.40.96.215/26 brd 188.40.96.255 scope global eth0 inet6 fe80::224:21ff:feef:2f86/64 scope link valid_lft forever preferred_lft forever 14: vif2.0: <BROADCAST,MULTICAST,PROMISC,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UNKNOWN qlen 32 link/ether fe:ff:ff:ff:ff:ff brd ff:ff:ff:ff:ff:ff inet6 fe80::fcff:ffff:feff:ffff/64 scope link valid_lft forever preferred_lft forever brctl show bridge name bridge id STP enabled interfaces eth0 8000.002421ef2f86 no peth0 vif2.0 ip r l Dom0: 188.40.96.192/26 dev eth0 proto kernel scope link src 188.40.96.215 default via 188.40.96.193 dev eth0 DomU: 188.40.96.192/26 dev eth0 proto kernel scope link src 188.40.96.238 default via 188.40.96.193 dev eth0

  Read the article

• error in installing informatica.

  - by raskart

  "The installer cannot ping the domain.Verify that Informatica Services is running on the domain host and select Retry. STDOUT: [1212] Command [ping] failed with error [[2121] Node [raskart] Domain [Doraskart] Host:Port [Doraskart:6001] has failed to ping back.]. exitcode -1 " This error occured when i tried to install informatica in my system. i checked informatica services and it was running and i have killed it and again started it but still then i have the problem. Please help me in this regard.Thanks in advance.

  Read the article

• Error with JSF2 and RichFaces

  - by Miguel Ping

  Hi, I'm trying to use RichFaces on a working JSF2 application. I incorporated the RichFaces jars, changed the web.xml but got the following error: 17:49:13,097 SEVERE [javax.enterprise.resource.webcontainer.jsf.application] Error Rendering View[/login.xhtml]: java.lang.NullPointerExcept ion at com.sun.faces.application.ApplicationImpl.createComponent(ApplicationImpl.java:936) at com.sun.faces.facelets.tag.jsf.CompositeComponentTagHandler.createComponent(CompositeComponentTagHandler.java:154) at com.sun.faces.facelets.tag.jsf.ComponentTagHandlerDelegateImpl.createComponent(ComponentTagHandlerDelegateImpl.java:311) at com.sun.faces.facelets.tag.jsf.ComponentTagHandlerDelegateImpl.apply(ComponentTagHandlerDelegateImpl.java:145) at javax.faces.view.facelets.DelegatingMetaTagHandler.apply(DelegatingMetaTagHandler.java:114) at javax.faces.view.facelets.CompositeFaceletHandler.apply(CompositeFaceletHandler.java:91) at javax.faces.view.facelets.DelegatingMetaTagHandler.applyNextHandler(DelegatingMetaTagHandler.java:120) at com.sun.faces.facelets.tag.jsf.ComponentTagHandlerDelegateImpl.apply(ComponentTagHandlerDelegateImpl.java:204) at javax.faces.view.facelets.DelegatingMetaTagHandler.apply(DelegatingMetaTagHandler.java:114) at javax.faces.view.facelets.CompositeFaceletHandler.apply(CompositeFaceletHandler.java:91) at com.sun.faces.facelets.compiler.NamespaceHandler.apply(NamespaceHandler.java:86) at javax.faces.view.facelets.CompositeFaceletHandler.apply(CompositeFaceletHandler.java:91) at com.sun.faces.facelets.compiler.EncodingHandler.apply(EncodingHandler.java:75) at com.sun.faces.facelets.impl.DefaultFacelet.include(DefaultFacelet.java:301) at com.sun.faces.facelets.impl.DefaultFacelet.include(DefaultFacelet.java:360) at com.sun.faces.facelets.impl.DefaultFacelet.include(DefaultFacelet.java:339) at com.sun.faces.facelets.impl.DefaultFaceletContext.includeFacelet(DefaultFaceletContext.java:191) at com.sun.faces.facelets.tag.ui.CompositionHandler.apply(CompositionHandler.java:149) at com.sun.faces.facelets.compiler.NamespaceHandler.apply(NamespaceHandler.java:86) at com.sun.faces.facelets.compiler.EncodingHandler.apply(EncodingHandler.java:75) at com.sun.faces.facelets.impl.DefaultFacelet.apply(DefaultFacelet.java:145) at com.sun.faces.application.view.FaceletViewHandlingStrategy.buildView(FaceletViewHandlingStrategy.java:716) at com.sun.faces.application.view.FaceletViewHandlingStrategy.renderView(FaceletViewHandlingStrategy.java:351) at com.sun.faces.application.view.MultiViewHandler.renderView(MultiViewHandler.java:126) at org.ajax4jsf.application.ViewHandlerWrapper.renderView(ViewHandlerWrapper.java:100) at org.ajax4jsf.application.AjaxViewHandler.renderView(AjaxViewHandler.java:176) at com.sun.faces.lifecycle.RenderResponsePhase.execute(RenderResponsePhase.java:127) at com.sun.faces.lifecycle.Phase.doPhase(Phase.java:101) at com.sun.faces.lifecycle.LifecycleImpl.render(LifecycleImpl.java:139) at javax.faces.webapp.FacesServlet.service(FacesServlet.java:313) at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:336) at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:242) at org.ajax4jsf.webapp.BaseXMLFilter.doXmlFilter(BaseXMLFilter.java:206) at org.ajax4jsf.webapp.BaseFilter.handleRequest(BaseFilter.java:290) at org.ajax4jsf.webapp.BaseFilter.processUploadsAndHandleRequest(BaseFilter.java:388) at org.ajax4jsf.webapp.BaseFilter.doFilter(BaseFilter.java:515) at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:274) at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:242) at org.apache.catalina.core.ApplicationDispatcher.invoke(ApplicationDispatcher.java:734) at org.apache.catalina.core.ApplicationDispatcher.processRequest(ApplicationDispatcher.java:541) at org.apache.catalina.core.ApplicationDispatcher.doForward(ApplicationDispatcher.java:479) at org.apache.catalina.core.ApplicationDispatcher.forward(ApplicationDispatcher.java:407) at org.apache.catalina.authenticator.FormAuthenticator.forwardToLoginPage(FormAuthenticator.java:318) at org.apache.catalina.authenticator.FormAuthenticator.authenticate(FormAuthenticator.java:243) at org.apache.catalina.authenticator.AuthenticatorBase.invoke(AuthenticatorBase.java:559) at org.jboss.web.tomcat.security.JaccContextValve.invoke(JaccContextValve.java:95) at org.jboss.web.tomcat.security.SecurityContextEstablishmentValve.process(SecurityContextEstablishmentValve.java:126) at org.jboss.web.tomcat.security.SecurityContextEstablishmentValve.invoke(SecurityContextEstablishmentValve.java:70) at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:127) at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:102) at org.jboss.web.tomcat.service.jca.CachedConnectionValve.invoke(CachedConnectionValve.java:158) at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:109) at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:368) at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:872) at org.apache.coyote.http11.Http11Protocol$Http11ConnectionHandler.process(Http11Protocol.java:653) at org.apache.tomcat.util.net.JIoEndpoint$Worker.run(JIoEndpoint.java:951) at java.lang.Thread.run(Thread.java:619) It seems that some jars are missing, but I cannot seem to find this cause. The above error is the only thing that the log spits out. Here's web.xml: <context-param> <param-name>javax.faces.FACELETS_LIBRARIES</param-name> <param-value>/WEB-INF/faces-validator-tags/general.taglib.xml; /WEB-INF/faces-converter-tags/general.converter.taglib.xml </param-value> </context-param> <!-- Startup Servlet <servlet> <servlet-name>StartUpServlet</servlet-name> <servlet-class>pt.cgd.agile.util.StartupServlet</servlet-class> <load-on-startup>1</load-on-startup> </servlet> --> <context-param> <param-name>javax.faces.DISABLE_FACELET_JSF_VIEWHANDLER</param-name> <param-value>true</param-value> </context-param> <context-param> <param-name>org.richfaces.SKIN</param-name> <param-value>blueSky</param-value> </context-param> <!-- Making the RichFaces skin spread to standard HTML controls --> <context-param> <param-name>org.richfaces.CONTROL_SKINNING</param-name> <param-value>enable</param-value> </context-param> <context-param> <param-name>javax.faces.STATE_SAVING_METHOD</param-name> <param-value>server</param-value> </context-param> <context-param> <param-name>org.richfaces.SKIN</param-name> <param-value>blueSky</param-value> </context-param> <context-param> <param-name>org.richfaces.CONTROL_SKINNING</param-name> <param-value>enable</param-value> </context-param> <filter> <display-name>RichFaces Filter</display-name> <filter-name>richfaces</filter-name> <filter-class>org.ajax4jsf.Filter</filter-class> </filter> <filter-mapping> <filter-name>richfaces</filter-name> <servlet-name>Faces Servlet</servlet-name> <dispatcher>REQUEST</dispatcher> <dispatcher>FORWARD</dispatcher> <dispatcher>INCLUDE</dispatcher> </filter-mapping> <listener> <listener-class>com.sun.faces.config.ConfigureListener</listener-class> </listener> <!-- Just here so the JSF implementation can initialize, *not* used at runtime --> <servlet> <servlet-name>Faces Servlet</servlet-name> <servlet-class>javax.faces.webapp.FacesServlet</servlet-class> <load-on-startup>1</load-on-startup> </servlet> <!-- Just here so the JSF implementation can initialize --> <servlet-mapping> <servlet-name>Faces Servlet</servlet-name> <url-pattern>*.jsf</url-pattern> </servlet-mapping> <login-config> <auth-method>FORM</auth-method> <form-login-config> <form-login-page>/login.jsf</form-login-page> <form-error-page>/loginError.jsf</form-error-page> </form-login-config> </login-config> <error-page> <exception-type>java.lang.Throwable</exception-type> <location>/errors/error.jsf</location> </error-page>

  Read the article

• Allow Incoming Responses Apache. On Ubuntu 11.10 - Curl

  - by Daniel Adarve

  I'm trying to get a Curl Response from an outside server, however I noticed I cant neither PING the server in question nor connect to it. I tried disabling the iptables firewall but I had no success. My server is running behind a Cisco Linksys WRTN310N Router with the DD-wrt firmware Installed. In which I already disabled the firewall. Here are my network settings: Ifconfig eth0 Link encap:Ethernet HWaddr 00:26:b9:76:73:6b inet addr:192.168.1.120 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::226:b9ff:fe76:736b/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:49713 errors:0 dropped:0 overruns:0 frame:0 TX packets:30987 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:52829022 (52.8 MB) TX bytes:5438223 (5.4 MB) Interrupt:16 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:341 errors:0 dropped:0 overruns:0 frame:0 TX packets:341 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:27604 (27.6 KB) TX bytes:27604 (27.6 KB) /etc/resolv.conf nameserver 192.168.1.1 /etc/nsswitch.com passwd: compat group: compat shadow: compat hosts: files dns networks: files protocols: db files services: db files ethers: db files rpc: db files netgroup: nis /etc/host.conf order hosts,bind multi on /etc/hosts 127.0.0.1 localhost 127.0.0.1 callcenter # The following lines are desirable for IPv6 capable hosts ::1 ip6-localhost ip6-loopback fe00::0 ip6-localnet ff00::0 ip6-mcastprefix ff02::1 ip6-allnodes ff02::2 ip6-allrouters /etc/network/interfaces # The loopback network interface auto lo iface lo inet loopback # The primary network interface auto eth0 iface eth0 inet static address 192.168.1.120 netmask 255.255.255.0 network 192.168.1.1 broadcast 192.168.1.255 gateway 192.168.1.1 The Url to which im trying to get a connection to is https://www.veripayment.com/integration/index.php When I ping it on terminal heres what I get daniel@callcenter:~$ ping https://www.veripayment.com/integration/index.php ping: unknown host https://www.veripayment.com/integration/index.php daniel@callcenter:~$ ping www.veripayment.com PING www.veripayment.com (69.172.200.5) 56(84) bytes of data. --- www.veripayment.com ping statistics --- 2 packets transmitted, 0 received, 100% packet loss, time 1007ms PHP Function in codeigniter public function authorizePayment(){ //--------------------------------------------------- // Authorize a payment //--------------------------------------------------- // Get variables from POST array $post_str = "action=payment&business=" .urlencode($this->input->post('business')) ."&vericode=" .urlencode($this->input->post('vericode')) ."&item_name=" .urlencode($this->input->post('item_name')) ."&item_code=" .urlencode($this->input->post('item_code')) ."&quantity=" .urlencode($this->input->post('quantity')) ."&amount=" .urlencode($this->input->post('amount')) ."&cc_type=" .urlencode($this->input->post('cc_type')) ."&cc_number=" .urlencode($this->input->post('cc_number')) ."&cc_expdate=" .urlencode($this->input->post('cc_expdate_year')).urlencode($this->input->post('cc_expdate_month')) ."&cc_security_code=" .urlencode($this->input->post('cc_security_code')) ."&shipment=" .urlencode($this->input->post('shipment')) ."&first_name=" .urlencode($this->input->post('first_name')) ."&last_name=" .urlencode($this->input->post('last_name')) ."&address=" .urlencode($this->input->post('address')) ."&city=" .urlencode($this->input->post('city')) ."&state_or_province=" .urlencode($this->input->post('state_or_province')) ."&zip_or_postal_code=" .urlencode($this->input->post('zip_or_postal_code')) ."&country=" .urlencode($this->input->post('country')) ."&shipping_address=" .urlencode($this->input->post('shipping_address')) ."&shipping_city=" .urlencode($this->input->post('shipping_city')) ."&shipping_state_or_province=" .urlencode($this->input->post('shipping_state_or_province')) ."&shipping_zip_or_postal_code=".urlencode($this->input->post('shipping_zip_or_postal_code')) ."&shipping_country=" .urlencode($this->input->post('shipping_country')) ."&phone=" .urlencode($this->input->post('phone')) ."&email=" .urlencode($this->input->post('email')) ."&ip_address=" .urlencode($this->input->post('ip_address')) ."&website_unique_id=" .urlencode($this->input->post('website_unique_id')); // Send URL string via CURL $backendUrl = "https://www.veripayment.com/integration/index.php"; $this->curl->create($backendUrl); $this->curl->post($post_str); $return = $this->curl->execute(); $result = array(); // Explode array where blanks are found $resparray = explode(' ', $return); if ($resparray) { // save results into an array foreach ($resparray as $resp) { $keyvalue = explode('=', $resp); if(isset($keyvalue[1])){ $result[$keyvalue[0]] = str_replace('"', '', $keyvalue[1]); } } } return $result; } This gets an empty result array. This function however works well in the previous server where the script was hosted before. No modifications where made whatsoever Thanks in Advance

  Read the article

< Previous Page | 17 18 19 20 21 22 23 24 25 26 27 28  | Next Page >