Search Results

Search found 31625 results on 1265 pages for 'private network'.

Page 21/1265 | < Previous Page | 17 18 19 20 21 22 23 24 25 26 27 28  | Next Page >

• Error setting up Data Protection Manager 2010 Agents / Network "Unauthenticated" in network settings

  - by Bowsa

  I'm not sure if the two are connected but i suspect they are. Basically I'm tring to setup Data Protection Manager 2010 on a fresh install of Server 2008 R2 in a SBS 2003 domain. Everything went fine until trying to install agents across the network. Upon clicking add, i get the following error message: Unable to connect to the Active Directory Domain Services Database. Make sure that the DPM server is a member of a domain and that the controller is running. Also verify that there is network connectivity between the DPM server and the domain controller. ID: 7 As usual (worryingly) the MSDN support for 2010 products is nearly non existant, clicking the error ID simply gives a page not found error. So after 2 days of Googling and trying various fixes (DNS settings, adding permissions to GPO objects, rejoining the domain and many more) I thought I'd ask here in the hope that someone out there may have had this issue before. Any help greatly appreciated!

  Read the article

• Windows 7 backup network restore: "The network location cannot be reached, 0x800704CF"

  - by Znarkus

  When I try to restore from a backup image, I get this error. After I enter the network address (\\10.0.0.1\backup or \\z\backup), the wizard presents me with the network login dialog, which leads me to believe that it can connect to the network (yes, the share is password protected). I decided to install Windows 7, since I thought that I could restore the image from Windows. The restore process in Windows can locate the backups, but to do an image restore it needs to reboot to the wizard above. Which of course gives the very same error. This is what \\z\backup looks like. Please help, I'm getting desperate. Update: Forgot to mention that the NAS is running Ubuntu, if that's relevant.

  Read the article

• Tip #19 Module Private Visibility in OSGi

  - by ByronNevins

  I hate public and protected methods and classes.  It requires so much work to change them in a huge project like GlassFish.  Not to mention that you may well have to support those APIs forever.  They are highly overused in GlassFish.  In fact I'd bet that > 95% of classes are marked as public for no good reason.  It's just (bad) habit is my guess. private and default visibility (I call it package-private) is easier to maintain.  It is much much easier to change such classes and methods around.  If you have ANY public method or public class in GlassFish you'll need to grep through a tremendous amount of source code to find all callers.  But even that won't be theoretically reliable.  What if a caller is using reflection to access public methods?  You may never find such usages. If you have package private methods, it's easy.  Simply grep through all the code in that one package.  As long as that package compiles ok you're all set.  There can' be any compile errors anywhere else.  It's a waste of time to even look around or build the "outside" world.  So you may be thinking: "Aha!  I'll just make my module have one giant package with all the java files.  Then I can use the default visibility and maintenance will be much easier.  But there's a problem.  You are wasting a very nice feature of java -- organizing code into separate packages.  It also makes the code much more encapsulated.  Unfortunately to share code between the packages you have no choice but to declare public visibility. What happens in practice is that a module ends up having tons of public classes and methods that are used exclusively inside the module.  Which finally brings me to the point of this blog:  If Only There Was A Module-Private Visibility Available Well, surprise!  There is such a mechanism.  If your project is running under OSGi that is.  Like GlassFish does!  With this mechanism you can easily add another level of visibility by telling OSGi exactly which public you want to be exposed outside of the module.  You get the best of both worlds: Better encapsulation of your code so that maintenance is easier and productivity is increased. Usage of public visibility inside the module so that you can encapsulate intra-module better with packages. How I do this in GlassFish: Carefully plan out at least one package that will contain "true" publics.  This is the package that will be exported by OSGi.  I recommend just one package. Here is how to tell OSGi to use it in GlassFish -- edit osgi.bundle like so:-exportcontents:     org.glassfish.mymodule.truepublics;  version=${project.osgi.version} Now all publics declared in any other packages will be visible module-wide but not outside the module. There is one caveat: Accessing "module-private" items outside of the module is controlled at run-time, not compile-time.  The compiler has no clue that a public in a dependent module isn't really public.  it will happily compile it.  At runtime you will definitely see fireworks.  The good news is that you don't have to wait for the code path that tries to use the "module-private" items to fire.  OSGi will complain loudly when that module gets loaded.  OSGi will refuse to load it.  You will see an error like this: remote failure: Error while loading FOO: Exception while adding the new configuration : Error occurred during deployment: Exception while loading the app : org.osgi.framework.BundleException: Unresolved constraint in bundle com.oracle.glassfish.miscreant.code [115]: Unable to resolve 115.0: missing requirement [115.0] osgi.wiring.package; (osgi.wiring.package=org.glassfish.mymodule.unexported). Please see server.log for more details. That is if you accidentally change code in module B to use a public that is really a "module-private" in module A, then you will see the error immediately when you try to test whatever you were changing in module B.

  Read the article

• unable to sniff traffic despite network interface being in monitor or promiscuous mode

  - by user65126

  I'm trying to sniff out my network's wireless traffic but am having issues. I'm able to put the card in monitor mode, but am unable to see any traffic except broadcasts, multicasts and probe/beacon frames. I have two network interfaces on this laptop. One is connected normally to 'linksys' and the other is in monitor mode. The interface in monitor mode is on the right channel. I'm not associated with the access point because, as I understand, I don't need to if using monitor mode (vs promiscuous). When I try to ping the router ip, I'm not seeing that traffic show up in wireshark. Here's my ifconfig settings: daniel@seasonBlack:~$ ifconfig eth0 Link encap:Ethernet HWaddr 00:1f:29:9e:b2:89 UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) Interrupt:16 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:112 errors:0 dropped:0 overruns:0 frame:0 TX packets:112 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:8518 (8.5 KB) TX bytes:8518 (8.5 KB) wlan0 Link encap:Ethernet HWaddr 00:21:00:34:f7:f4 inet addr:192.168.1.116 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::221:ff:fe34:f7f4/64 Scope:Link UP BROADCAST RUNNING MTU:1500 Metric:1 RX packets:9758 errors:0 dropped:0 overruns:0 frame:0 TX packets:4869 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:3291516 (3.2 MB) TX bytes:677386 (677.3 KB) wlan1 Link encap:UNSPEC HWaddr 00-02-72-7B-92-53-33-34-00-00-00-00-00-00-00-00 UP BROADCAST NOTRAILERS PROMISC ALLMULTI MTU:1500 Metric:1 RX packets:112754 errors:0 dropped:0 overruns:0 frame:0 TX packets:101 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:18569124 (18.5 MB) TX bytes:12874 (12.8 KB) wmaster0 Link encap:UNSPEC HWaddr 00-21-00-34-F7-F4-00-00-00-00-00-00-00-00-00-00 UP RUNNING MTU:0 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) wmaster1 Link encap:UNSPEC HWaddr 00-02-72-7B-92-53-00-00-00-00-00-00-00-00-00-00 UP RUNNING MTU:0 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) Here's my iwconfig settings: daniel@seasonBlack:~$ iwconfig lo no wireless extensions. eth0 no wireless extensions. wmaster0 no wireless extensions. wlan0 IEEE 802.11bg ESSID:"linksys" Mode:Managed Frequency:2.437 GHz Access Point: 00:18:F8:D6:17:34 Bit Rate=54 Mb/s Tx-Power=27 dBm Retry long limit:7 RTS thr:off Fragment thr:off Power Management:off Link Quality=68/70 Signal level=-42 dBm Noise level=-69 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:0 Invalid misc:0 Missed beacon:0 wmaster1 no wireless extensions. wlan1 IEEE 802.11bg Mode:Monitor Frequency:2.437 GHz Tx-Power=27 dBm Retry long limit:7 RTS thr:off Fragment thr:off Power Management:off Link Quality:0 Signal level:0 Noise level:0 Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:0 Invalid misc:0 Missed beacon:0 Here's how I know I'm on the right channel: daniel@seasonBlack:~$ iwlist channel lo no frequency information. eth0 no frequency information. wmaster0 no frequency information. wlan0 11 channels in total; available frequencies : Channel 01 : 2.412 GHz Channel 02 : 2.417 GHz Channel 03 : 2.422 GHz Channel 04 : 2.427 GHz Channel 05 : 2.432 GHz Channel 06 : 2.437 GHz Channel 07 : 2.442 GHz Channel 08 : 2.447 GHz Channel 09 : 2.452 GHz Channel 10 : 2.457 GHz Channel 11 : 2.462 GHz Current Frequency=2.437 GHz (Channel 6) wmaster1 no frequency information. wlan1 11 channels in total; available frequencies : Channel 01 : 2.412 GHz Channel 02 : 2.417 GHz Channel 03 : 2.422 GHz Channel 04 : 2.427 GHz Channel 05 : 2.432 GHz Channel 06 : 2.437 GHz Channel 07 : 2.442 GHz Channel 08 : 2.447 GHz Channel 09 : 2.452 GHz Channel 10 : 2.457 GHz Channel 11 : 2.462 GHz Current Frequency=2.437 GHz (Channel 6)

  Read the article

• Network shares do not mount.

  - by Alex

  My network shares were mounting fine yesterday.. suddenly they are not. They were mounting fine for the last two weeks or however long since I added them. When I run sudo mount -a I get the following error: topsy@monolyth:~$ sudo mount -a mount error(12): Cannot allocate memory Refer to the mount.cifs(8) manual page (e.g. man mount.cifs) mount error(12): Cannot allocate memory Refer to the mount.cifs(8) manual page (e.g. man mount.cifs) mount error(12): Cannot allocate memory Refer to the mount.cifs(8) manual page (e.g. man mount.cifs) mount error(12): Cannot allocate memory Refer to the mount.cifs(8) manual page (e.g. man mount.cifs) topsy@monolyth:~$ I followed this guide when setting them up: http://ubuntuforums.org/showthread.php?t=288534 So I tried removing them by doing the reverse, and then rebooting, then adding them again and rebooting. Problem persists.

  Read the article

• Can't access network share with name defined in hosts file

  - by Einar Egilsson

  I have a network share on a machine that I can only reach by IP address. I then defined an alias for the IP in my hosts file so I could use that instead of the IP but then I can't log on to the share, I just get the logon prompt again and again. So basically this: \\172.17.0.48\SomeShare works but this \\myalias\SomeShare doesn't. myalias is defined in c:\windows\system32\drivers\etc\hosts as 172.17.0.48 myalias And I can use the alias for remote desktop without problems. Can anyone tell me why this doesn't work for fileshares?

  Read the article

• Wireless Access Point - Can't ping other machines on the wireless network

  - by Surfer513

  I have a wireless access point (Netgear), and I have it setup so that it has an IP address in the current subnet (let's say 192.168.2.0, subnet mask of 255.255.255.0). The machine that it is connected to via ethernet cable has an IP in the same subnet as the AP. The machines that are connected to the AP via the wireless connection also have an IP address in the same subnet as the rest of the network (192.168.2.0). All machines can ping the access point, but they cannot ping each other. I don't totally understand why, because there is connection and all of the machines are in the same subnet. I realize this is a layer 3 device, but is there an issue because of this AP's lack of gateway capabilities? (i.e. no routing table, etc.)

  Read the article

• Removing connections to network printers that no longer exist

  - by Jeff Hardy

  I'm trying to delete some network printer connections from a Windows Server 2003 (SP2) machine because the printer shares no longer exist. Windows shows the printers' status as "Printer not found on server, unable to connect"; this is expected; the printers are now on a different server. Only one machine ever connected to the printer shares; it no longer needs to and I'd like to clean it up. However, when I try to delete the connections, I get an error message: --------------------------- Remove Printer --------------------------- Printer connection cannot be removed. Operation could not be completed. --------------------------- OK --------------------------- The "solutions" I've found online seem to be more voodoo than anything (and they still don't work!). Does anybody know how I can delete these long-gone printers?

  Read the article

• No compatible network card

  - by sbintcliffe

  Motherboard: Asus K8N-E Deluxe with onboard NIC (nVidia nForce) Secondary NIC: I've tried using a standard NIC (Device Manager displays this as D-Link DFE-538TX 10/100, but under manufacturer in the General tab of the properties in Windows it states Realtek Semiconductor Corp.) I have downloaded ESXi 4.0.0 build 208167 and cooked to disc. I've booted from it, the .TGZ modules load from the yellow and grey screen, the progress bar reaches to about 60% and like a second later the screen changes and I have the following information on screen; "No compatible network adapter found. Please consult the HCG." I've checked the HCG and found that my motherboard is listed. I also get the same message with the secondary NIC. Any ideas please?

  Read the article

• What's the best way to Notify network users of outages or maintenance

  - by Dubs

  There are times when one of our applications is down for maintenance and we'd like to let our users know about it before they start flooding our help desk with calls. What's the best way to notify our users of an event on the network? Some users are on our intranet, while others log in from the Web. Is there an application they can install to which we can send notifications messages? I'm interested to hear what others have come up with to address this requirement. Thanks!

  Read the article

• DDWRT or similar as repeater in a network.

  - by Quantumplation

  I have a friend with sever connection issues due to her wireless router being on the bottom floor of her house, and the computer being a story or two away. I have several old Linksys routers lying about, one of which is currently running DDWRT for my network. Would it be a good idea (effective) to configure one of these routers as a wireless bridge of some kind in an intermediary floor to improve her connection? Is there any specific configuration beyond the standard DDWRT setup that I would need to do? Thanks for your help. =)

  Read the article

• Server 2008 R2 .Net 4 Programs running from Network share won't work

  - by Lim

  we have several .Net Apps stored on a Network share on our old Server (Windows Server 2003). These Apps get called by Windows 7 32bit Clients and work perfectly fine. We recently wanted to upgrade our Server to Windows Server 2008 R2 and moved the Apps from the old share to our new share on the new Server. The problem started right afterwards since all of our .Net Programs won't start anymore from the new share (2008 R2). The Error that comes up is: "This application could not be started." and with a link to Microsoft: http://support.microsoft.com/kb/2715633 (This Error also shows up when i start a simple console HelloWorld from the server share created in VS2012) Does anyone have any Idea why this is not working anymore on the new Servershare? We've been searching for two days now with no result at all. Any Tips / Help / Questions appreciated :) Greetings Lim

  Read the article

• Could not Upload file in network mapped drive using asp.net/vb.net

  - by Hasan

  I have tried several times to upload file remotely to a mapped network drive, but it is raising an exception: Could not find a part of the path 'X:\test\testing.wav'. I read through various internet /blog/ Microsoft help sites, but I still don't know what is wrong. Does anyone know what is causing this problem and how I can correct it? It works fine when I am uploading to a local drive as a test. It is also working When I am running the code from the development server, but if I try with published code, then it fails. :(

  Read the article

• Testing domains on intranet/local network?

  - by meder

  This may sound like a very silly question, but how could I setup domains ( eg www.foo.com ) on my local network? I know that all a domain is, is just a name registered to a name server and that nameserver has a zone record, and in the zone record there are several records of which the A Record is the most important in dictating where the lookup goes to, which machine it should point to. I basically want to make it so that I can refer to my other computer/webserver as 'www.foo.com' and make my local sites accessible by that, mess with virtualhost records in Apache and zone records for the domain except locally so I can explore and fiddle around and learn instead of having to rely on the domains I own on a public registrar that I could only access through the internet. Once again I apologize if this is a silly question, or if I'm completely thinking backwards. Background information: My OS is Debian, I'm a novice at Linux. I've done very small edits in zone records on a Bind9 Server but that's the extent of my networking experience.

  Read the article

• Needs free/ opensource network monitoring tool for office LAN

  - by Amit Ranjan

  I know there must be a lot similar questions on SU. Let me explain my setup first. I have 4-5 PC, Laptops and Few Android Phones in my office. To get them on a network , I have a UTStarCom, WA3002G1 ADSL2+ router with a landline broadband connection which has nothing to do with any PC except the configuration settings. Broadband channel is always on, we need to switch on the router and the internet is ready for us. No Internet Connection sharing is done via any PC. I have a limited 20GB monthly plan, which is consumed in 10-20 days, depending upon the download requirements. So in the above case, i need some suggestions from you: How do I monitor my Internet Bandwidth along-with the connected systems, realtime? Any free opensource tool available? Tweaks / Changes in PC to save bandwidth as my ISP do not have any Unlimited plan. PC and Laptops are Windows XP and/Or windows 7. Either of the platform tools are welcome.

  Read the article

• WDS - Access to network share via local user

  - by Kenny Bones

  When installing Windows 7 using WDS, a local user account is used during the set up after the main image of Win7 is installed. And I've got this application that lies on the network and not the deploymentshare itself that I want to install. But logically I get no access to that share via the local user account. Is it possible to do this somehow? Or do I have to move the Share to the Deployment share? Or possibly map the share to a separate drive or something?

  Read the article

• Creating an office network and monitoring all activity without a proxy

  - by Robert

  We are setting up our office network and would like to track all the websites visited by our employees. However, we would not like to use any proxy based solutions. Our work is highly dependent on applications in which you cannot configure a proxy. Hence, the approach we would like to follow is setting up a router inside a computer (something like this : http://www.techrepublic.com/article/configure-windows-server-2003-to-act-as-a-router/5844624) This will also allow us to attach multiple ethernet cards and have redundancy in internet connectivity with complete abstraction from the user about which connection is being used. But most importantly, since all the traffic will be going through the computer (configured as a router) I assume there will be a way to run packet analysis on all the request / responses being made. For example, list all the FTP servers connected to (port 21), give a graph of all the URLs visited per day by frequency. Is there already a software which does this ? Or is it possible to build something like this ?

  Read the article

• Network connection through a wall

  - by BCS

  I have a place where I want to set up a network connection through a normal residential wall where I can't cut any holes. I don't want to just set up a wireless system. Does anyone make a device that you place on either side of a wall to hook up a connection? Preferably something that can do 100Mb full duplex and can't be eavesdropped on with common hardware? The situation is that I'm moving into a new place (that I'm renting, so I can't do any cutting) and the POP is in one room and I have all the equipment is in another room.

  Read the article

• IP Address on internet access shared over ad-hoc wifi network

  - by Jacxel

  The Situation When im staying at my girlfriends we both like to have internet access on our laptops but her accommodation don't allow wireless routers. My Question My question is if I set up an Ad-Hoc network to share the internet connection as shown here on How To Geek. Will my laptop be acting as a wireless router or will the connection all go through my laptop as one ip address so it appears to be my computer accessing the webpages etc, that my girlfriend actually is. i would be interested in knowing any additional information that could help sove this problem eg. if connectify would do what i want.

  Read the article

• Network shares do not mount

  - by Alex

  My network shares were mounting fine yesterday.. suddenly they are not. They were mounting fine for the last two weeks or however long since I added them. When I run sudo mount -a I get the following error: topsy@monolyth:~$ sudo mount -a mount error(12): Cannot allocate memory Refer to the mount.cifs(8) manual page (e.g. man mount.cifs) mount error(12): Cannot allocate memory Refer to the mount.cifs(8) manual page (e.g. man mount.cifs) mount error(12): Cannot allocate memory Refer to the mount.cifs(8) manual page (e.g. man mount.cifs) mount error(12): Cannot allocate memory Refer to the mount.cifs(8) manual page (e.g. man mount.cifs) topsy@monolyth:~$ I followed this guide when setting them up: http://ubuntuforums.org/showthread.php?t=288534 So I tried removing them by doing the reverse, and then rebooting, then adding them again and rebooting. Problem persists.

  Read the article

• A network share folder is invisible to users

  - by Myrddin Emrys

  I have a network share folder that I was recently cleaning up permissions to. I took off the four individual names from the access permissions to the folder, and added a new security group (Universal) with standard Read/Write permissions to that folder, then added those 4 people to the group. However... now nobody can see the folder. The users can see the other 9 folders in that shared drive, but the 10th is missing. I cannot see any security permission in the parent folder or in the folder itself which would cause it to be invisible to anyone, regardless of whether they have permission to open it or edit files within.

  Read the article

• Cached Network Share Credentials?

  - by Brian Wolfe

  Hi, I have an issue in Windows 7 where I get the following error message when attempting to access an admin network share on a machine in another domain: "Multiple connections to a server or shared resource by the same user, using more than one user name, are not allowed. Disconnect all previous connections to the server or shared resource and try again." Troubleshooting I've Done Start Run cmd net use * /DELETE Start Manage Windows Credentials Deleted all credentials I still receive the same error until I reboot my machine. After I reboot, it works fine. However, I am able to log into the admin share if I hit it by it's IP address. QUESTION My question is, is there somewhere else I should be looking for cached user credentials? Thanks, Brian

  Read the article

• need help upgrading small business wifi network

  - by Henry Jackson

  Our small business currently has 3 wireless access points around the building, each with their own SSID. Security is done with WEP (ick) and MAC address filtering (double ick). We are trying to reconfigure the setup, with these goals: wifi roaming between the access points user-based authentication that isn't as annoying as MAC address filtering. 1) The entire building is hardwired with ethernet, so I assume it should be easy to set up the routers to act as one big network, but I can't figure out how. Can someone point me in the right direction? The routers are consumer-grade linksys routers, is it possible to do this without getting new hardware? 2) For security, we will probably upgrade to WPA2, and I'm thinking of using the Enterprise version so that users can log in with a username, instead of having a single key (so if an employee leaves or something, their access can be removed). We have several on-site Windows servers, can one of them be set up as a RADIUS server, or is that best left to a dedicated machine (again, using existing hardware is good).

  Read the article

• Laptop connects to other network but not to my home wireless

  - by Nilesh

  My home network's wireless SSID is say "XYZ" I also have an ethernet wire from the same router. I have two laptops A and B Earlier both A and B were able to connect to my home internet through the ethernet and wireless. Suddenly, the laptop B can no longer connect to XYZ or through ethernet. When I do plug the wire, i get the connection icon all green but when I try to access any web page it errors out (page not found) But strangely laptop B connects to my neighbours wireless SSID "ABC". I have also tested laptop B with other networks and it connects fine. Laptop A and many other devices still connect fine with my home wireless "XYZ" Strange thing is when my laptop B connects wireless through XYz, it gets the IP address but then none of the browsers (chrome,firefox, IE) can show any web pages. What settings should I be checking on laptop B that is preventing it to connect to my home internet. Thank you

  Read the article

• Ubuntu (11.10) fails to connect to wireless network

  - by Tal Galili

  I just installed ubuntu 11.10, and tried to have it connect to the internet. I use a wireless USB stick by edimax (it is called IEEE802.11b/g/n nano USB adapter or also EW-7811Un). My problem is that Ubuntu seems to be able to use the USB to see the networks around me, but when I try to connect to my network - it just keeps trying and failing. I am connected to the internet through a 300M Wireless N Router Model No. TL-WR841N / TL-WR841ND Can you please advise on how this can be resolved? Thanks!

  Read the article

< Previous Page | 17 18 19 20 21 22 23 24 25 26 27 28  | Next Page >