Search Results

Search found 16068 results on 643 pages for 'private registration'.

Page 21/643 | < Previous Page | 17 18 19 20 21 22 23 24 25 26 27 28  | Next Page >

• private subnet nat (openvpn / racoon)

  - by Jonas Schnelli

  I have a openvpn subnet 10.8.0.0/24 running one server and one client (laptop). openvpn works fine. Browsing the web over openvpn from the laptop works also fine. Now on the server there is a private subnet with 10.7.8.128/28. The subnet is set up with racoon (IPSEC s2s vpn). The s2s vpn allows me to access the subnet 10.3.5.0/24 at the other s2s vpn end. Works all fine when I'm connected with ssh to my server. From my laptop i can ping 10.7.8.129 (the servers ipsec local ip) but i cannot reach the net 10.3.5.0/24. I tried to add a static route on my laptop 10.3.5.0/24 over gw 10.7.8.129 with no success. Any ideas how i do setup the nat / routing? Thanks

  Read the article

• Remote connection to dynamic public ip & private ip addresses

  - by user51737

  Many times I connected to windows computer which has static public ip address via remote desktop over wan links. I'm wondering how could I connect to the remote computer that has dynamic public ip address & private ip addresses assigned. I've 2 systems at home: xp system-------connected to internet(dynamic public ip) & allowed other users to connected to the internet on the interface. windows vista system--------enabled dhcp on the interface to access internet from xp. How could I remotely connect from my office to the 'vista system'?. If I've a router/modem at my home it may be possible to allow the ports for the system but I don't. Any tips?

  Read the article

• DSA private key format

  - by ansur

  So I used puttygen to generate a DSA private key and then exported that to the OpenSSH format and here's what I got when I ran OpenSSL's asn1parse on it: 0:d=0 hl=4 l= 443 cons: SEQUENCE 4:d=1 hl=2 l= 1 prim: INTEGER :00 7:d=1 hl=3 l= 129 prim: INTEGER :B9916796B7A3EFFD5CA36368186D0ED 193BE7FDD61CC6851174F3E9781A0C0CEA7473E528372F559A1DB2A7E049A9BEFAE2CAAC55527049 2A0CD55B59A48A53BCADD32181F519EA9E6A98EF8EF59DE314A2E69606C728F2F8DEE722B4C67BA6 8EB8A619B6006804F83740F9C74C38136522E7E83F22920AA39822FBDA0DF4D0B 139:d=1 hl=2 l= 21 prim: INTEGER :D832F5B01F075FEC0F162B91982F34D B26A0CC29 162:d=1 hl=3 l= 129 prim: INTEGER :9B73F47AEFF8E39584FD10ACF81CCD5 75C96FC5558A5C94B941EF76318D132007ACAE1EA22E95CE0B13FC7875CE4D4ED33BA639CD8C2AC9 C0A0530FB7786F584A62EBAE5985E1C26ED0D0B9FDD5E8DB0142BE182A4E5359307007060C327FEE C2F8D04EABB37D7B74076EB9BDB4885F627DE85708D5BDBF5177A05721E09A367 294:d=1 hl=3 l= 128 prim: INTEGER :6BD9267D2D1E4546EE05F6CD087F311 93C0EEB13B1E139F5072E900AB2EEF68EEC28BF4D7D6CAE4DEE59005F00BAE07343EE520C217FF6E 7880DC788E4555F78CCB5E89A10CDC71A663DA696C5BC34E296CEB3518D65A79BF00B6D592B1399A 9F0D79AE3F3FB445EE1F2B4B72515F036C8E1D5C7FAD336FD3503874645C5C264 425:d=1 hl=2 l= 20 prim: INTEGER :15295A12325E5F1A6F7243B7BB3BE74 6FE7B76E9 My question is... where is this format described? What does the first 0 integer value mean for example? I guess I could look in the puttygen source code but is there an RFC describing this format or something?

  Read the article

• We want to setup low cost private cloud [closed]

  - by Virtual Jasper

  We are a small company with very limit funds. In order to improve our server reliability, we are studying to migrate to CLOUD. We seen some CLOUD provider, they would charge by resources such as, CPU, RAM.....Disk space....High Availability....etc. We have server team, so we also consider to built the private CLOUD, we seen the Windows 8 server, it does need license fee. So we looking at Linux side, we look at Ubuntu and OpenStack. What is the different between Ubuntu and OpenStack solutions? Is it both free on software license? and only to pay the technical support.

  Read the article

• user inheritance in django

  - by amateur

  Hi guys, I saw a couple of ways extending user information of users and decided to adopt the model inheritance method. for instance, I have : class Parent(User): contact_means = models.IntegerField() is_staff = False objects = userManager() Now it is done, I've downloaded django_registration to help me out with sending emails to new users. The thing is, instead of using registration forms to register new user, I want to to invoke the email sending/acitvation capability of django_registration. So my workflow is: 1. add new Parent object in admin page. 2. send email My problem is, the django-registration creates a new registration profile together with a new user in the user table. how do I tweak this such that I am able to add the user entry into the custom user table. I have tried to create a modelAdmin and alter the save_model method to launch the create_inactive_user from django_registration, however I do not how to save the user object generated from django_registration into my Parent table when I have using model inheritance and I do not have a Foreign key attribute in my parent model.

  Read the article

• I can't Open my excel file in c#

  - by Ruben Guico

  Hi, Below is my code, i tried to open my excel file in my c# application but the program give's me an error message "Cannot Access "my excel.xls". But when I specify the file path in my string path variable it works, the problem is I need to get the file path from an openFileDialog. using System; using System.IO; using System.Collections.Generic; using System.Text; using System.Data; using System.Windows.Forms; using System.Data.OleDb; using System.Reflection; using MOIE = Microsoft.Office.Interop.Excel; using OFFICE = Microsoft.Office.Core; namespace EmpUploader { public class ExcelCon { private OleDbDataReader reader = null; private OleDbCommand excelCommand = new OleDbCommand(); private OleDbDataAdapter adapter = new OleDbDataAdapter(); private DataTable excelData = new DataTable(); private MOIE.ApplicationClass objExcel = new MOIE.ApplicationClass(); private MOIE.Workbook wb = null; private string myConn = ""; private string strSQL = ""; private string err = ""; private string path2 = ""; private int sheetCount = 0; private OleDbConnection Con = new OleDbConnection(""); #region "excel interop prarameters" private static object xl_missing = Type.Missing; private static object xl_true = true; private static object xl_false = false; private object xl_update_links = xl_missing; private object xl_read_only = xl_missing; private object xl_format = xl_missing; private object xl_password = xl_missing; private object xl_write_res_password = xl_missing; private object xl_ignore_read_only = xl_missing; private object xl_origin = xl_missing; private object xl_delimiter = xl_missing; private object xl_editable = xl_missing; private object xl_notify = xl_missing; private object xl_converter = xl_missing; private object xl_add_to_mru = xl_missing; private object xl_local = xl_missing; private object xl_corrupt_load = xl_missing; #endregion } //MY CODE FOR OPENING THE EXCEL //note that my file path came from an openfiledialog public void InitializeConnection(string path) { //connection string for excel myConn = @"Provider=Microsoft.Jet.OLEDB.4.0; Data Source=" + path + "; Extended Properties =Excel 8.0"; Con.ConnectionString = myConn; Con.Open(); //this is the sample specified path that worked when i test my application //path = @"C:\shinetsu p5 emp list.xls"; objExcel.Visible = false; wb = objExcel.Workbooks.Open(path, xl_update_links, xl_read_only, xl_format, xl_password, xl_write_res_password, xl_ignore_read_only, xl_origin, xl_delimiter, xl_editable, xl_notify, xl_converter, xl_add_to_mru, xl_local, xl_corrupt_load); sheetCount = wb.Worksheets.Count; } }

  Read the article

• Moq Testing a private method .Many posts but still cannot make one example work

  - by devnet247

  Hi, I have seen many posts and questions about "Mocking a private method" but still cannot make it work and not found a real answer. Lets forget the code smell and you should not do it etc.... From what I understand I have done the following: 1) Created a class Library "MyMoqSamples" 2) Added a ref to Moq and NUnit 3) Edited the AssemblyInfo file and added [assembly: InternalsVisibleTo("DynamicProxyGenAssembly2")] [assembly: InternalsVisibleTo("MyMoqSamples")] 4) Now need to test a private method.Since it's a private method it's not part of an interface. 5) added the following code [TestFixture] public class Can_test_my_private_method { [Test] public void Should_be_able_to_test_my_private_method() { //TODO how do I test my DoSomthing method } } public class CustomerInfo { public string Name { get; set; } public string Surname { get; set; } } public interface ICustomerService { List<CustomerInfo> GetCustomers(); } public class CustomerService: ICustomerService { public List<CustomerInfo> GetCustomers() { return new List<CustomerInfo> {new CustomerInfo {Surname = "Bloggs", Name = "Jo"}}; } protected virtual void DoSomething() { } } Could you provide me an example on how you would test my private method? Thanks a lot

  Read the article

• .NET HttpListener: when registering both HTTP & HTTPS I get "conflicts with an existing registration

  - by Greg

  I'm trying to use .NET HttpListener in a C# project. When I register my prefix "http://*:8080/" it does not seem to work for HTTPS urls (i.e. doesn't pick them up). When I try the following code to register both the HTTP and HTTPS versions of the prefix however I get the error: "Failed to listen on prefix 'https://:8080/' because it conflicts with an existing registration on the machine."* How can I get my prefix working for both HTTP & HTTPS? private HttpListener _listener; // Create prefixes var prefixes = new List<string>(); prefixes.Add("http://*:8080/"); prefixes.Add("https://*:8080/"); // Create HttpListener _listener = new HttpListener(); foreach (string prefix in prefixes) { _listener.Prefixes.Add(prefix); } _listener.Start(); // <== ERROR HERE thanks

  Read the article

• Installing Recaptcha in Joomla 1.5 user registration

  - by Samuel

  I am trying to install ReCaptcha into the user registration of Joomla 1.5. This may just be an issue with Joomla but when i hit register nothing happens. I think it's doing some JavaScript form validation but there is nothing telling the user what went wrong. if, God forbid, they do fill out the form correctly Joomla will redirect the user to the homepage and give no notice of success. Is this a Joomla issue or is there something wrong with my install? Does anyone know of a plug-in or module for Joomla that would make this easier? Thanks in advance, Samuel UPDATE: Joomla does a lot of "stuff"/"something" to the $_POST and $_GET variables which was causing the reCaptcha to not function. This was for work which is past so I am not spending anymore time on it. Shameless Plug: use wordpress instead. this can be closed as I don't have time to verify which answer works

  Read the article

• Openconnect for Cisco VPN doesn't recognize private key file - asn1 encoding routines:ASN1_CHECK_TLEN:wrong tag

  - by Alexander Skwar

  I'm trying to use my Synology DS212 NAS box also act as VPN gateway to my companies VPN. Sadly, they only use Cisco ASA and to complicate stuff even further, we've got to use personal certificates (which is of course more secure, but more complicate to get going…). So I compiled OpenConnect v4.06 from http://www.infradead.org/openconnect/. As a very basic test, I tried to build a connection by manually invoking openconnect, passing along the key and cert files, like so: /lib/ld-linux.so.3 --library-path /opt/lib \ /opt/openconnect/sbin/openconnect \ --certificate=$VPN_CFG/alexander.crt \ --sslkey=$VPN_CFG/alexander.key \ --cafile=$VPN_CFG/Company_VPN_CA.crt \ --user=alexander --verbose <ip>:443 It fails :( Attempting to connect to <ip>:443 Using certificate file $VPN_CFG/alexander.crt Using client certificate '/[email protected]/OU=Company VPN' 5919:error:0D0680A8:asn1 encoding routines:ASN1_CHECK_TLEN:wrong tag:tasn_dec.c:1315: Loading private key failed (see above errors) Loading certificate failed. Aborting. Failed to open HTTPS connection to <ip> Failed to obtain WebVPN cookie When I run the same command with the same cert/key files on a Ubuntu 12.04 box, it works: openconnect \ --certificate=$VPN_CFG/alexander.crt \ --sslkey=$VPN_CFG/alexander.key \ --cafile=$VPN_CFG/Company_VPN_CA.crt \ --user=alexander --verbose <ip>:443 Attempting to connect to <ip>:443 Using certificate file $VPN_CFG/alexander.crt Extra cert from cafile: '/CN=Company AG VPN CA/O=Company AG/L=Zurich/ST=ZH/C=CH' SSL negotiation with <ip> Server certificate verify failed: self signed certificate Certificate from VPN server "<ip>" failed verification. Reason: self signed certificate Enter 'yes' to accept, 'no' to abort; anything else to view: yes Connected to HTTPS on <ip> GET https://<ip>/ […] Well… The error on the NAS is this: 5919:error:0D0680A8:asn1 encoding routines:ASN1_CHECK_TLEN:wrong tag:tasn_dec.c:1315: Any ideas, what's causing this? On Syno, I use OpenConnect 4.06. On Ubuntu, I just compiled and installed to a custom location OpenConnect 4.06 as well. Thanks, Alexander

  Read the article

• Using Entity Framework with an SQL Compact Private Installation

  - by David Veeneman

  I am using Entity Framework 4 in a desktop application with SQL Compact. I want to use a private installation of SQL Compact with my application, so that my installer can install SQL Compact without giving the user a second installation to do. It also avoids versioning hassles down the road. My development machine has SQL Compact 3.5 SP1 installed as a public installation, so my app runs fine there, as one would expect. But it's not running on my test machine, which does not have SQL Compact installed. I get this error: The specified store provider cannot be found in the configuration, or is not valid. I know some people have had difficulty with SQL Compact private installations, but I have used them for a while, and I really like them. Unfortunately, my regular private installation approach isn't working. I have checked the version numbers on my SQL CE files, and they are all 3.8.8078.0, which is the SP2 RC version. Here are the files I have included in my private installation: sqlcecompact35.dll sqlceer35EN.dll sqlceme35.dll sqlceqp35.dll sqlcese35.dll System.Data.SqlServerCe.dll System.Data.SqlServerCe.Entity.dll I have added a reference to System.Data.SqlServerCe to my project, and I have verified that all of the files listed above are being copied to the application folder on the installation machine. Here is the code I use to configure an EntityConnectionStringBuilder when I open a SQL Compact file: var sqlCompactConnectionString = string.Format("Data Source={0}", filePath); // Set Builder properties builder.Metadata = string.Format("res://*/{0}.csdl|res://*/{0}.ssdl|res://*/{0}.msl", edmName); builder.Provider = "System.Data.SqlServerCe.3.5"; builder.ProviderConnectionString = sqlCompactConnectionString; var edmConnectionString = builder.ToString(); Am I missing a file? Am I missing a configuration stepp needed to tell Entity Framework where to find my SQL Compact DLLs? Any other suggestions why EF isn't finding my SQL Compact DLLs on the installation machine? Thanks for your help.

  Read the article

• What is private bytes, virtual bytes, working set?

  - by Devil Jin

  I am using perfmon windows utility to debug memory leak in a process. Perfmon explaination: Working Set- Working Set is the current size, in bytes, of the Working Set of this process. The Working Set is the set of memory pages touched recently by the threads in the process. If free memory in the computer is above a threshold, pages are left in the Working Set of a process even if they are not in use. When free memory falls below a threshold, pages are trimmed from Working Sets. If they are needed they will then be soft-faulted back into the Working Set before leaving main memory. Virtual Bytes- Virtual Bytes is the current size, in bytes, of the virtual address space the process is using. Use of virtual address space does not necessarily imply corresponding use of either disk or main memory pages. Virtual space is finite, and the process can limit its ability to load libraries. Private Bytes- Private Bytes is the current size, in bytes, of memory that this process has allocated that cannot be shared with other processes. Q1. Is it the private byte should I measure to be sure if the process is having any leak as it does not involve any shared libraries and any leak if happening will be coming from the process itself? Q2. What is the total memory consumed by the process? Is it the Virtual byte size? or Is it the sum of Virtual Bytes and Working Set Q3. Is there any relation between private bytes, working set and virtual bytes. Q4. Any tool which gives a better idea memory information?

  Read the article

• Registration-Free .net libraries with legacy VB6 applications

  - by Vidar

  I've been searching for hours for resources on how to successfully use registration free Com interop. I've found some resources on using old COM libraries in .net applications, but allmost nothing on using new .NET libraries in COM applications (more spcecific: VB6 applications) Basically my search gave two useful resources: http://msdn.microsoft.com/en-us/library/ms973915.aspx (Walkthrough by Steve Wight) There is allso the main MSDN article on the subject (No link because this is my first post, and I am only allowed one link) Is nobody else doing this, or am I the only one struggling to get my head around it? Any good reads will be very much appreciated

  Read the article

• Altering lazy-loaded object's private variables

  - by Kevin Pang

  I'm running into an issue with private setters when using NHibernate and lazy-loading. Let's say I have a class that looks like this: public class User { public int Foo {get; private set;} public IList<User> Friends {get; set;} public void SetFirstFriendsFoo() { // This line works in a unit test but does nothing during a live run with // a lazy-loaded Friends list Users(0).Foo = 1; } } The SetFirstFriendsFoo call works perfectly inside a unit test (as it should since objects of the same type can access each others private properties). However, when running live with a lazy-loaded Friends list, the SetFirstFriendsFoo call silently fails. I'm guessing the reason for this is because at run-time, the Users(0).Foo object is no longer of type User, but of a proxy class that inherits from User since the Friends list was lazy-loaded. My question is this: shouldn't this generate a run-time exception? You get compile-time exceptions if you try to access another class's private properties, but when you run into a situation like this is looks like the app just ignores you and continues along its way.

  Read the article

• Django Social Registration - Twitter Callback going to example.com

  - by user578888

  I have been working through installing django social registration on my webfaction account. So far I have the facebook login working. When I attempt to log in to to twitter I get the correct login page but after choosing "Allow" I am forwarded to the following URL: http://example.com/social/twitter/callback/.... where "example.com" is the actual URL it is forwarding to. I have setup the twitter app and have entered a valid oauth callback URL. I have searched the code on my developer machine for references to "example.com" but have not found any. Any help nailing this down will be greatly appreciated.

  Read the article

• Database: storing data from user registration form

  - by teggy

  Let's say I have an user registration form. In this form, I have the option for the user to upload a photo. I have an User table and Photo table. My User table has a "PathToPhoto" column. My question is how do I fill in the "PathToPhoto" column if the photo is uploaded and inserted into Photo table before the user is created? Another way to phrase my question is how to get the newly uploaded photo to be associated to the user that may or may not be created next. I'm using python and postgresql.

  Read the article

• Automatic testing of GUI related private methods

  - by Stein G. Strindhaug

  When it comes to GUI programming (at least for web) I feel that often the only thing that would be useful to unit test is some of the private methods*. While unit testing makes perfect sense for back-end code, I feel it doesn't quite fit the GUI classes. What is the best way to add automatic testing of these? * Why I think the only methods useful to test is private: Often when I write GUI classes they don't even have any public methods except for the constructor. The public methods if any is trivial, and the constructor does most of the job calling private methods. They receive some data from server does a lot of trivial output and feeds data to the constructor of other classes contained inside it, adding listeners that calls a (more or less directly) calls the server... Most of it pretty trivial (the hardest part is the layout: css, IE, etc.) but sometimes I create some private method that does some advanced tricks, which I definitely do not want to be publicly visible (because it's closely coupled to the implementation of the layout, and likely to change), but is sufficiently complicated to break. These are often only called by the constructor or repeatedly by events in the code, not by any public methods at all. I'd like to have a way to test this type of methods, without making it public or resorting to reflection trickery. (BTW: I'm currently using GWT, but I feel this applies to most languages/frameworks I've used when coding for GUI)

  Read the article

• In registration form adding date dialogbox how can apply validation in system date in dialog ends

  - by narasimha

  hi i am implementing registration form adding date field then click icon to display date dialog window then limit date validation in system date below date only how can implement the validation protected Dialog onCreateDialog(int id) { Calendar c = Calendar.getInstance(); int cyear = c.get(Calendar.YEAR); int cmonth = c.get(Calendar.MONTH); int cday = c.get(Calendar.DAY_OF_MONTH); switch (id) { case DATE_DIALOG_ID: return new DatePickerDialog(this, mDateSetListener, cyear, cmonth, cday); } return null; } private DatePickerDialog.OnDateSetListener mDateSetListener = new DatePickerDialog.OnDateSetListener() { public void onDateSet(DatePicker view, int year, int monthOfYear, int dayOfMonth) { String date_selected = String.valueOf(monthOfYear+1)+" /"+String.valueOf(dayOfMonth)+" /"+String.valueOf(year); EditText birthday=(EditText) findViewById(R.id.EditTextBirthday); birthday.setText(date_selected); } }; public void onClick(View v) { if(v == b1) showDialog(DATE_DIALOG_ID); } } ** showing in system date in below dates only how can implemented some solution in running year to below years are display not incrementing above years this condition are appliying validations how can implemented ?

  Read the article

• How to set up a PRIVATE vimwiki on Dropbox.com

  - by Zongheng Yang

  Hi everyone, I assume those who are reading this page know what vimwiki and dropbox.com are and what they are for, so I might directly go into my confusion. The common way of setting a PRIVATE vimwiki on dropbox is simply let your vimwiki directories be under Dropbox folder (but not Dropbox/Public/ because it would be PUBLIC). Dropbox allows directly viewing html with dropbox.com/* url: for example a index.html can be accessed by url https://dl-web.dropbox.com/get/Wiki/html/index.html?w=bfead71a, being added after the file name a specified string, ?w=bfead71a. Hence, if inside index.html there is reference to A.html, which is located in the same folder index.html is in, it has to be accessed using some url like https://dl-web.dropbox.com/get/Wiki/html/index.html?w=SPECIFIED_STRING. But it is seemingly impossible to hack vimwiki in order to make the hrefs in converted htmls corrected in this way. Is there some approach that can resolve this problem? I hope I make myself clear. Had you any questions, please ask me for further explanations. Thank you!

  Read the article

• What is the best private cloud storage setup

  - by vdrmrt

  I need to create a private cloud and I'm searching for the best setup. These are my 2 most important requirements 1. Disk and system redundant 2. Price / GB as low as possible The system is going to be used as backup setup which will receive data 24/7 over SFTP and rsync. High throughput is not that important. I'm planning to use glusterfs and consumer grade 4TB hard-drives. I have worked out 3 possible setups 3 servers with 11 4TB HDD Setup up a replica 3 glusterfs and setup each hard drive as a separate ext4 brick. Total capacity: 44TB HDD / TB ratio of 0.75 (33HDD / 44TB) 2 servers with 11 4TB HDD The 11 hard-drives are combined in a RAIDZ3 ZFS storage pool. With a replica 2 gluster setup. Total capacity: 32TB (+ zfs compression) HDD / TB ratio of 0.68 (22HDD / 32TB) 3 servers with 11 4TB consumer hard-drives Setup up a replica 3 glusterfs and setup each hard-drive as a separate zfs storage pool and export each pool as a brick. Total capacity: 32TB (+ zfs compression) HDD / TB ratio of 0.68 (22HDD / 32TB) (Cheapest) My remarks and concerns: If a hard drive fails which setup will recover the quickest? In my opinion setup 1 and 3 because there only the contents of 1 hard-drive needs to be copied over the network. Instead of setup 2 were the hard-drive needs te be reconstructed by reading the parity of all the other harddrives in the system. Will a zfs pool on 1 harddrive give me extra protection against for example bit rot? With setup 1 and 3 I can loose 2 systems and still be up and running with setup 2 I can only loose 1 system. When I use ZFS I can enable compression which will give me some extra storage.

  Read the article

• Windows-to-linux: Putty with SSH and private/public key pair

  - by Johnny Kauffman

  I spent about 3 hours trying to figure out how to connect to a linux box from my windows machine using putty without having to send the password. This is connecting to an Ubuntu server that is using OpenSSH. The private key is SSH-2 RSA, 1024 bits. I am connecting using SSH2. I have run into the more common problems already: Putty generated the public key in the "wrong format". I have corrected this (as seen on this blog post). However, since I am not yet connected, I cannot absolutely confirm that this file is in the correct format. The key is all on a single line now, and I have tried adding/removing line breaks at the end of the file. I've also tried the public file doctoring process a few times to ensure that I haven't flubbed up the manual conversion. Even so, I have no way to verify accuracy here. The permissions were at once point wrong as well, specifically meaning that the file had too many permissions. I had to solve this too and I know it got past this because I no longer see a related error in /var/log/auth.log. I've tried both authorized_keys and authorized_keys2 in case the server has an old version of OpenSSH, but this changed nothing. I do have access as a user. After this keyfile stuff fails, I can enter my password instead The only remaining nibble of information I have is that it claims I have the alleged password wrong: sshd[22288]: Failed password for zzzzzzz from zz.zz.zz.zz port 53620 ssh2 Even so, as far as I can tell, this is just a lazy try/catch somewhere, since I don't think there's a password involved at all. I see nothing else in any of the /var/log files of use. What else could be wrong?

  Read the article

• JavaMe Bluetooth service registration

  - by NoGlue

  Hello, I am trying to develope an application that offers a service via bluetooth. Everything works fine in the emulator but as soon I install it on a real device (6120/X6 Nokia) the service cannot be found. If I search for already registered services such as OBEX they are found. So I think it has something to do with the registration. This is how I register the service, all of this happens in its own thread. try { LocalDevice.getLocalDevice().setDiscoverable(DiscoveryAgent.GIAC); } catch (BluetoothStateException e) { } try { notifier = (StreamConnectionNotifier) Connector.open(m_url); ServiceRecord sr = local.getRecord(notifier); StreamConnection conn = notifier.acceptAndOpen(); } catch (IOException e) { } And this is what m_url looks like: "btspp://localhost:" + 0x1116 + ";name=BlueMatch"; Thanks for your time. Best regards

  Read the article

• ssh works fine when using public interface, but slow when using private interface

  - by Kevin M

  My Linux(UbuntuEEE) to Linux(CentOS) ssh takes a long time to log in(~15 seconds) when using the private interface, but not when using the public one. I have a Linux box acting as my router. As such, it has multiple interfaces(75.xxx.xxx.xxx, 192.168.1.1). I can ssh in from the internal interface(192.168.1.65 to .1), but it will take a while. I can ssh into the public address, and it goes quickly(~1 second). I have another box that I can ssh into the inside interface from and it goes quickly. iptables is set to accept packets coming into the interface immediately. sshd's UseDNS is normally on; I get the same problem if I turn it off and restart sshd. I normally use public-key authentication; I have done a mv ~/.ssh/ ~/ssh/ and it will ask me for a password after going slowly. After logging in(using either interface), speed is quick. ssh client version(via ssh -v):OpenSSH_4.7p1 Debian-8ubuntu1.2, OpenSSL 0.9.8g 19 Oct 2007 ssh server version(via rpm -qv openssh_server):openssh-server-4.3p2-29.el5

  Read the article

• PHP registration script: verifying and telling the user what went wrong

  - by Maxime

  Hi, I'm building a registration script and I want to insert the user's input (username, mail) ONLY if it's not already in the database. What I usually do in such cases is a request to see if something's already there, something like: "SELECT * FROM things WHERE thing_name = '$treated_user_input'". I have two fields that need to be unique this time though. Is there a way to do only one SELECT request and still be able to tell the user exactly what field went wrong? Or do I have to do one request per unique field? Thanks for your answers.

  Read the article

• Calling private constructors with Reflection.Emit?

  - by Jakob Botsch Nielsen

  I'm trying to emit the following IL: LocalBuilder pointer = il.DeclareLocal(typeof(IntPtr)); il.Emit(OpCodes.Ldarg_0); il.Emit(OpCodes.Stloc, pointer); il.Emit(OpCodes.Ldloca, pointer); il.Emit(OpCodes.Call, typeof(IntPtr).GetMethod("ToPointer")); il.Emit(OpCodes.Ret); The delegate I bind with has the signature void* TestDelegate(IntPtr ptr) It throws the exception Operation could destabilize the runtime. Anyone knows what's wrong? EDIT: Alright, so I got the IL working now. The entire goal of this was to be able to call a private constructor. The private constructor takes a pointer so I can't use normal reflection. Now.. When I call it, I get an exception saying Attempt by method <built method> to access method <private constructor> failed. Apparently it's performing security checks - but from experience I know that Reflection is able to do private stuff like this normally, so hopefully there is a way to disable that check?

  Read the article

< Previous Page | 17 18 19 20 21 22 23 24 25 26 27 28  | Next Page >