Search Results

Search found 11051 results on 443 pages for 'removable drive'.

Page 21/443 | < Previous Page | 17 18 19 20 21 22 23 24 25 26 27 28  | Next Page >

  • Tests for hard drive health

    - by Samik R
    I have a 5-year old hard drive (bought new at the time), but it was sitting in my closet for 5 years, unused. I have just started using it, and seems to be getting a whirring sound (rather distinct from the other noises like fans etc.). I ran a few diagnostics tests, like Seagate's SeaTools, and the SMART test, and a few generic tests and all passed. Should I be concerned? Is there any other test that I should run? It's an internal IDE WD 5400RPM drive. Being used for a desktop, which is itself pretty high-end (AMD Phenom II X6 1100T, AMD Radeon GPU etc.), but would be used rather occasionally to begin with (avg. 1-2 hrs. per day). Thanks for any pointers.

    Read the article

  • Repair BAD Sectors or Buy a new HDD?

    - by Nehal J. Wani
    I have a Seagate internal hard disk drive. I recently opened up my laptop [Dell Inspiron N5010] [Warranty has expired], cleaned it and it worked normally after waking up from hibernation. However, when I restarted it, it stuck on windows loading screen, then tried to boot from Dell recovery partition but failed. It gave the error: Windows has encounter a problem communicating with a device connected to your computer. This error can be caused by unplugging a removable storage device such as an external USB drive while the device is in use, or by faulty hardware such as a hard drive or CD-ROM drive that is failing. Make sure any removable storage is properly connected and then restart your computer If you continue to receive this error message, contact the hardware manufacturer. Status: 0xc00000e9 Info: An unexpected I/O error has occurred. While cleaning, I had mistakenly touched the round silvery thing at the bottom of the HDD. I don't know whether this has caused the problem or not. Since I have Fedora also installed in the same HDD, I can boot from it but it shows weird read errors when I ask it to mount Windows partitions. The disk utility also says that the Hard Disk has many bad sectors and needs to be replaced. I downloaded Seatools from Seagate website and used it. In the long test, I gave it permission to repair the first 100 errors which it did successfully. Now I am confused at what I should do. Internal Hard Disk Costs: a. Internal HDD 500GB Costs: Rs3518 b.1 External HDD 500GB Costs: Rs3472 b.2 External HDD 1TB Costs: Rs5500 c. Internal to External Converter Costs: Rs650 I have the following options: (i) Buy an External HDD, backup my data. Try to repair bad sectors of HDD. Then two cases arise: (a) My Internal HDD gets repaired [almost] (b) My internal HDD doesn't get repaired. Then I need to buy another internal HDD and replace the damaged one. OR break the seal of the external one and put it inside my laptop as internal. Breaking the case involves risks. (ii) Buy a Internal HDD and an Internal to External Converter Case [Not very reliable], backup my data. Try to repair bad sectors of HDD. Then two cases arise: (a) My Internal HDD gets repaired [almost] (b) My internal HDD doesn't get repaired. Then I need to just put in the new internal HDD I just bought. Experts, please guide me as to what will be the most VFM option? Also, if a HDD is failing, is it that I shouldn't read from it too otherwise there is a chance of other sectors failing? What I mean is, is it wrong to read from the HDD without taking backup first?

    Read the article

  • Install XP over Ubuntu. (Flash Drive)

    - by Joseph
    My girlfriend needs to install Windows XP over Ubuntu on her PC, because she need to run some software that Wine and a visual machine can't handle as well as the 'real' thing. Problem is, it seems very difficult to make a bootable flash drive with the files from a XP .iso from Ubuntu. All the guides I could find was about Windows 7, formatting the USB as NTFS, then use UNetbootin to extract the files to the USB. Problem is, that only works with 7, not XP. Does anyone know how I can make a bootable XP flash drive? Thanks! It's really important.

    Read the article

  • Generic Windows 98 USB Drive drivers?

    - by Electrons_Ahoy
    I've got an old Win98 machine that I'd like to pull some data off of. (Tens of gigs of data, actually.) The machine still runs fine, but due to the age, it doesn't have a cd burner, and the pre-NT networking won't connect to SMB shares without a fair amount of wrenching on the registry that I don't really want to do. What I really want to do is plug in an external USB hard drive and copy the files. But - Win98 didn't ship with generic USB drive drivers, and external drives don't ship with them these days. Can anyone point me at a reputable generic driver I can install?

    Read the article

  • USB hard drive not recognized

    - by user318772
    Until recently I was using the portable USB hard drive in my win 7 laptop and ubuntu laptop. Suddenly now none of the laptops recognize it. This is the message i get by doing lsusb... Bus 001 Device 004: ID 1058:1010 Western Digital Technologies, Inc. Elements External HDD Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 003: ID 0b97:7762 O2 Micro, Inc. Oz776 SmartCard Reader Bus 003 Device 002: ID 0b97:7761 O2 Micro, Inc. Oz776 1.1 Hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 002: ID 413c:a005 Dell Computer Corp. Internal 2.0 Hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub fdisk doesn't show the external hard drive Disk /dev/sda: 80.0 GB, 80026361856 bytes 255 heads, 63 sectors/track, 9729 cylinders, total 156301488 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x0004a743 Device Boot Start End Blocks Id System /dev/sda1 * 2048 152111103 76054528 83 Linux /dev/sda2 152113150 156301311 2094081 5 Extended /dev/sda5 152113152 156301311 2094080 82 Linux swap / Solaris when i do testdisk TestDisk 6.14, Data Recovery Utility, July 2013 Christophe GRENIER <[email protected]> http://www.cgsecurity.org TestDisk is free software, and comes with ABSOLUTELY NO WARRANTY. Select a media (use Arrow keys, then press Enter): >Disk /dev/sda - 80 GB / 74 GiB - ST980825AS Disk /dev/sdb - 2199 GB / 2048 GiB testdisk-> Intel->analyse I get partition error Disk /dev/sdb - 2199 GB / 2048 GiB - CHS 2097152 64 32 Current partition structure: Partition Start End Size in sectors Partition: Read error Here is the output of dmesg [11948.549171] Add. Sense: Invalid command operation code [11948.549177] sd 2:0:0:0: [sdb] CDB: [11948.549181] Read(16): 88 00 00 00 00 00 00 00 00 00 00 00 00 08 00 00 [11948.550489] sd 2:0:0:0: [sdb] Invalid command failure [11948.550495] sd 2:0:0:0: [sdb] [11948.550499] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [11948.550505] sd 2:0:0:0: [sdb] [11948.550508] Sense Key : Illegal Request [current] [11948.550514] Info fld=0x0 [11948.550519] sd 2:0:0:0: [sdb] [11948.550525] Add. Sense: Invalid command operation code [11948.550531] sd 2:0:0:0: [sdb] CDB: [11948.550534] Read(16): 88 00 00 00 00 00 00 00 00 00 00 00 00 08 00 00 [11948.551870] sd 2:0:0:0: [sdb] Invalid command failure [11948.551876] sd 2:0:0:0: [sdb] [11948.551880] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [11948.551885] sd 2:0:0:0: [sdb] [11948.551888] Sense Key : Illegal Request [current] [11948.551895] Info fld=0x0 [11948.551900] sd 2:0:0:0: [sdb] [11948.551905] Add. Sense: Invalid command operation code [11948.551911] sd 2:0:0:0: [sdb] CDB: [11948.551914] Read(16): 88 00 00 00 00 00 00 00 00 00 00 00 00 08 00 00 If possible i want to retrive at least some data from this hard drive. If thats not possible I would like to format it and use it. Any help will be greatly appreciated Thanks

    Read the article

  • Mount drive at /Volumes/NAME/ or similar in Cygwin

    - by Adam
    Hi.. I'm using Cygwin on Windows 7. When I plug in an USB stick, the drive automatically gets mounted to /cygdrive/x . This is good and really easy to use. My problem is that the drive letter changes sometimes, and when I've got remotes set up in git - I've got one called usb at /cygdrive/h/ - this sometimes doesn't work and I have to change the remote URL. That's just an example, there are other scenarios where I wouldn't want it to change. I like what the Mac does, and puts mounts a volume at /Volumes/STICK (STICK is the Volume name of my usb stick). Is there any way I can do this, or something similar under Cygwin. Thanks

    Read the article

  • All items in my pen drive had been renamed automatically and cannot open it

    - by pabz
    All the items (both files and folders) inside my pen drive had been renamed to some characters like :]h.¡?.A++ and when I try to open any folder Windows gives this message. The filename,directory name, or volume label syntax is incorrect I was told that it is a problem of the pen drive, not a virus. They say if I format the pendrive then I will be able to use it again normally. But I'm not sure. And I need those files. Does anybody knows a solution?

    Read the article

  • Corrupted files, hard drive test?

    - by all-R
    Hi guys, I'm currently on a macbook with a 1TB external hard drive connected trough a USB hub wich is connected on my macbook. The problem is, my disk, wich is partitioned in 2 (one HFS+ and one NTFS) keeps getting corrupted, recently it was my HFS+ partition, I could not repair it using the Apple's Disk utility, but was able to backup my files. Is it synonym that my hard drive is failing? Is it because of my USB hub? I also keep all my iTunes library on my external HD (HFS+ partition), and did a lot of transfer lately, adding files, removing etc. the last time, my partition got corrupted after a lot of deleted items. If anybody has an idea of what to check first, what could cause the problem, I would appreciate it :) Thanks!

    Read the article

  • Defrag/TRIM settings for hybrid hard drive?

    - by Joel Coehoorn
    I recently acquired a momentus XT hybrid hard drive. This is a tradition spinning HDD with a small SSD portion for frequently used files. Normally, you are not supposed to defrag SSDs, as it does not help performance and can significantly reduce the life of the drive. But you do need to defrag an HDD to keep good performance. So where does that leave us for hybrid drives? Do I need to turn off defragging in Windows to preserve the SSD portion? Is the on-disk controller smart enough to handle defragging correctly? Is there some utility I need to set it up that I missed? Additionally, for SSDs you normally want to check for and enable TRIM support... but this makes no sense for a HDDs. Where does that leave us for hybrid drives? Should I try to enable TRIM or not?

    Read the article

  • Dead USB flash drive

    - by Unsliced
    So a friend has come to me with a problem. They have a dead USB thumb drive which no longer responds when plugged into a machine. I've tried it in a Mac and it doesn't even respond, at least on a Windows XP machine it sees that it is there but can't show it in explorer, just that whatever is plugged in has malfunctioned. There is obviously current because the activity light on the drive illuminates. I'm looking for suggestions, please. I have access to Mac or Windows hardware and am happy to experiment (and even to pay if the solution works!) It's a bit late to recommend regular backups, but in the lack of that, what's the next best forensic advice? Edit: I should stress that, if possible, we're trying to rescue the data, after all, thumb drives are basically disposable and hardly worth the bother if there's no emotional or functional reason for wanting to rescue it!

    Read the article

  • Most efficient hard drive configuration for multitasking system

    - by user99391
    I hope I didn’t screw up the tile. Currently I’m using for my system 2x500g Raid0 system. I’m thinking about an upgrade but I got hold up by few questions. I need at least 100-120 gb for my system and apps and looking for a technological upgrade also. I've end up with 3 choices. Single 120 ssd (sata 6 drive) 2x60 ssd drives, but I've heard it's not possible. PCI ssd drive (~120gb). They all have very similar read/write values and prices but I was wondering if anyone could give some tips on which way to go. I run win7x64 and do a lot of multitasking(especially adobe stuff).

    Read the article

  • Mount drive at /Volumes/NAME/ or similar in Cygwin

    - by Adam
    Hi.. I'm using Cygwin on Windows 7. When I plug in an USB stick, the drive automatically gets mounted to /cygdrive/x . This is good and really easy to use. My problem is that the drive letter changes sometimes, and when I've got remotes set up in git - I've got one called usb at /cygdrive/h/ - this sometimes doesn't work and I have to change the remote URL. That's just an example, there are other scenarios where I wouldn't want it to change. I like what the Mac does, and puts mounts a volume at /Volumes/STICK (STICK is the Volume name of my usb stick). Is there any way I can do this, or something similar under Cygwin. Thanks

    Read the article

  • Time Machine/iMac loses all trace of external hard drive after a few days

    - by Bill
    Hey guys, First time posting, also a Mac newbie (recent windows convert) so I'm hoping I can get some help here :) I have a Hitachi Deskstar drive in an external casing that I got from ebuyer. (its one of those unknown fairly cheapish enclosures) connected via firewire. I hook it up and it works fine, but then at some point over the next week or so I'll realise that my last update was 3 days ago or so. At this point the Mac will not recognise the drive as existing and the only thing to do is switch off and on the external enclosure. It then works fine for a while. If I had to guess I'm assuming its powering down or something when the Mac goes into standby? Is there anyway to solve this?

    Read the article

  • Move hibernate file to a different drive

    - by Kamarey
    Is it possible to move a Windows hibernate file to a different drive? E.g. if I have Windows installed on C, I want it's hibernate file be on D. Eee... just thought that I wanted to ask this question about hibernate file, not the page file. Don't know where the page file came from. Sorry:) So the question is about hibernate file. But no problems with all answers about page file. (Edit: The original question title was "Move page file to a different drive")

    Read the article

  • How can I Fix the CD/DVD refresh for the media drive so that it is recognized automatically?

    - by Denja
    Hello Community, I have recently installed Ubuntu 10.10 and it seems to work flawlessly. But today I tried to check some CDs and I was surprised that Ubuntu doesn't automatically refresh the CD/DVDs inserted in my media drive. I had to eject manually the CD/DVD from Ubuntu and then Insert the new CD and only then Ubuntu reads the data in the newly inserted CD/DVD. How can I fix the CD/DVD refresh for the media drive so that Ubuntu 10.10 recognize it automatically?

    Read the article

  • Unable to boot ubuntu 11.10 from external usb drive

    - by user45006
    I'm new to Ubuntu (and actually all things Linux) as of this morning, so please excuse any stupid mistakes I may be making. I recently bought an external hard drive for my newly built PC (that is running windows 7 if it matters). I would like to install Ubuntu onto the external drive and boot from there. I downloaded Ubuntu 11.10 and made a bootable cd, unplugged my internal HDDs, plugged in the external drive, installed Ubuntu 11.10 on the external drive via the installer, and replugged in my internal HDDs. Then I set my bios boot order to: Boot from USB-HDD - Boot from Hard Disk - Boot from CD/DVD. Now when I restart I get the message "Starting Operating System..." (or something like that, I forget exactly what it says) that lingers on the screen for a moment and then windows starts. Any idea what the problem may be? ~Relevant info~ BIOS version: Award Software International, Inc. F2, 2/22/2011 Ubuntu Version: 11.10 External Hard Drive: Western Digital My Passport Essential 500GB Portable Hard Drive (Black) ~Things I've already tried~ 1) Unplug internal HDDs so that only external drive was plugged in via usb. Same thing happened only obviously my BIOS could not detect any hard drives besides the external one. When booting received error "Could not detect operating system" 2) Formatted external hard drive and re installed. It didn't make a difference, however interestingly when I booted from cd the ubuntu installer said it detected ubuntu 11.10 on the external hard drive. 3) Within BIOS I've messed around with every boot order combo I could think of both in the "Hard Disk boot order" screen and the "Boot order" screen. I'm a little confused of why there are two screens for this. 4) Held F12 during startup which opens (what I think is) the one time boot screen and it gave me the options "Hard Drive", "cd/dvd", "USB-FDD", "USB-cdrom", "USB-HDD", and "USB-something else I can't remember what it was". I tried all of them, but the same thing as before happened each time. ~References~ I noticed several people on askubuntu have tried to do something similar if not the exact same. In fact, I even found a post that pretty much outlines step by step exactly what I did... only their's worked. /jealous. Linky: Install Ubuntu or Kubuntu on a External USB Drive I'm willing to try a different version of ubuntu - it's not like my heart is set on 11.10, but it's a pain to open my case and unplug my internal hard drives so I'd prefer not to do this unless someone is reasonably confident it'll work. Thank you for all of your help in advance! I'm really looking forward to exploring Ubuntu!

    Read the article

  • I need help installing Ubuntu 11.10 to multi-drive system

    - by CookyMonzta
    I have a machine with 3 hard drives; the primary, which is 750GB (drive 0), and 2 others, each of which is 640GB (drives 1 and 2). On the last screen before the actual installation begins, this is how my hard drive configuration looks: /dev/sda [DISK0, 750GB] /dev/sda1 ntfs 104MB [Win7 System Reserved] /dev/sda2 ntfs 499,997MB [Windows 7 Pro] free space 250,052MB [This space intended for Windows 8] /dev/sdb [DISK1, 640GB] /dev/sdb1 ntfs 400,085MB [Windows XP Pro] free space 240,049MB [This space intended for Ubuntu] /dev/sdc [DISK2, 640GB] [This drive intended for various backups] free space 160,033MB /dev/sdc5 ntfs 480,101MB [Acronis Secure Zone] As you can see, I have 3 drives, all SATA. I have Win7 on my first drive (0), WinXP on my second drive (1) and a secure zone for daily backups on my third drive (2). I want to put Ubuntu 11.10 Oneiric Ocelot on the drive that also has XP. I've already used 400GB for XP and I have 240GB remaining, for which, my intention was to create a 4GB swap file and use the rest for Ubuntu itself. This is what my second hard drive looked like, for my intended setup before installation: /dev/sdb /dev/sdb5 swap 4,095MB [Linux swap] /dev/sdb6 ext4 235,951MB [Ubuntu 11.10] Needless to say, this is only the second time I have attempted to install Linux. I managed to get 7.10 Gutsy Gibbon working on an old machine. I have two problems with this installation: Ubuntu asks for a location to install the boot loader (i.e., "Device for Boot Loader Installation"). I already have a boot loader; namely, Acronis OS Selector (from Acronis Disk Director 11). So I decided to put the Ubuntu boot loader in /dev/sdb6 (where I intend to install Ubuntu), to keep it from interfering with my Acronis OS Selector. Once I hit "Install now", I ended up with the following error: "No root file system is defined. Please correct this from the partitioning menu." What am I missing? Did I attempt to put the boot loader in the wrong place? I assume I did, because as I am writing this entry, I am looking at LinuxIdentity.com's Ubuntu 11.04 Natty Narwhal magazine, and I see a screenshot (Figure 7 on Page 13) that implies that the boot loader can be installed anywhere, including the first hard drive (in the MBR, which would obviously force me to reinstall the Acronis OS Selector) or even on a floppy. But why do I get an undefined root file system error? I thought /dev/sdb6 was the root file. Obviously I'm missing something in the installation procedure. Should I try installing it in Windows using the WUBI Installer? I assume that, if I attempt to install Ubuntu from WinXP (on the second drive), it will automatically install Ubuntu on the empty partition alongside XP. But will I have the option of creating a swap partition? And what if the WUBI Installer searches all of my drives and decides to install Ubuntu on my first drive's empty partition (which I have left empty for Win8 upon its release)?

    Read the article

  • Why can't Ubuntu find an ext3 filesystem on my hard-drive?

    - by urig
    This question is related to this question: Not enough components to start the RAID array? I'm trying to retrieve data from a "Western Digital MyBook World Edition (white light)" NAS device. This is basically an embedded Linux box with a 1TB HDD in it formatted in ext3. It stopped booting one day for no apparent reason. I have extracted the HDD from the NAS device and installed it in a desktop machine running Ubuntu 10.10 in the hope of accessing the files on the drive. I have followed instructions in this forum post, intended to mount the drive through Terminal: http://mybookworld.wikidot.com/forum/t-90514/how-to-recover-data-from-wd-my-book-world-edition-nas-device#post-976452 I have identified the partition that I want to mount and recover files from as /dev/sd4 by running "fdisk -l" and getting this: Disk /dev/sdb: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x0001cf00 Device Boot Start End Blocks Id System /dev/sdb1 5 248 1959930 fd Linux raid autodetect /dev/sdb2 249 280 257040 fd Linux raid autodetect /dev/sdb3 281 403 987997+ fd Linux raid autodetect /dev/sdb4 404 121601 973522935 fd Linux raid autodetect// When I try to mount using: "mount -t ext3 /dev/sdb4 /media/xyz" I get the following error: mount: wrong fs type, bad option, bad superblock on /dev/sdb4, missing codepage or helper program, or other error In some cases useful info is found in syslog - try dmesg | tail or so And "dmesg | tail" shows me: [ 15.184757] [drm] Initialized nouveau 0.0.16 20090420 for 0000:01:00.0 on minor 0 [ 15.986859] [drm] nouveau 0000:01:00.0: Allocating FIFO number 1 [ 15.988379] [drm] nouveau 0000:01:00.0: nouveau_channel_alloc: initialised FIFO 1 [ 16.353379] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro,commit=0 [ 16.705944] tg3 0000:02:00.0: eth0: Link is up at 100 Mbps, full duplex [ 16.705951] tg3 0000:02:00.0: eth0: Flow control is off for TX and off for RX [ 16.706102] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 19.125673] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro,commit=0 [ 27.600012] eth0: no IPv6 routers present [ 373.478031] EXT3-fs (sdb4): error: can't find ext3 filesystem on dev sdb4. I guess that last line is the punch line :) Why can't it find the ext3 filesystem on my drive? What do I need to do to mount this partition and copy its contents? Does it have anything to do with the drive being part of a RAID Array (see question mentioned above)? Many thanks to any who can help.

    Read the article

  • How can I add a second hard drive to a previously configured UEFI/ACHI Windows 8 machine?

    - by pflyer
    Recently purchased a new Windows 8 PC. It came with one hard drive. I want to a second hard drive to it. This second hard drive is my data hard drive from my previous computer. However, I have run into issues when the system accesses it. The drive is found in the BIOS. But is not seen by Explorer or Disk Management. I have added the drive to the next available SATA slot: SATA 2. The machine is a UEFI/ACHI based machine. In my reading I have found people documenting the following: 1) adding multiple partitioned hard drives (like mine is) to UEFI based machines is not possible 2) I have seen it suggested that you can only add blank hard drives to UEFI based machines. However, in doing so, I did not have success. I tried to add it as a hard drive with unallocated space and then as a hard drive with a single simple partition. Both attempts failed. My ultimate question: What is the proper procedure for adding a second hard drive to a UEFI/ACHI machine? I do not want to reinstall the OS and start from scratch as I have seen suggested elsewhere. There has to be a way to accomplish this without all that hassle. Thanks in advance for your help.

    Read the article

  • How can I Fix the CD/DVD refresh for the media drive so that Ubuntu 10.10 recognize it automatically?

    - by Denja
    Hello Community, I have recently installed Ubuntu 10.10 and it seems to work flawlessly. But today I tried to check some CDs and I was surprised that Ubuntu doesn't automatically refresh the CD/DVDs inserted in my media drive. I had to eject manually the CD/DVD from Ubuntu and then Insert the new CD and only then Ubuntu reads the data in the newly inserted CD/DVD. How can I fix the CD/DVD refresh for the media drive so that Ubuntu 10.10 recognize it automatically?

    Read the article

  • Clone a Windows Installation to a 3TB Hard Drive; MBR to GPT

    - by DanBlakemore
    I have Windows 7 Professional 64-bit installed on my desktop. Unfortunately for me and my wallet my hard drive is failing. I have purchased a 3TB hard drive as a replacement for my current 2TB drive. I would like to avoid as much hassle as possible in moving to this new drive so I would like to copy my current partition to the new drive using Gparted. The problem is that I suspect that my current partition is MBR, and I need GPT on my new drive since it is 3TB. Can I simply copy the MBR partition onto the new disk and then convert it to GPT after the fact (can you even convert the type of a partition)? Or would I need to somehow copy the contents of the partition into a GPT partition on the new drive? How do I go about making this transistion? Also, are there any issues I should be wary of booting to a GPT partition? If it matters, my motherboard is 1 year old as of May, 2012. Edit: My motherboard is 1 day old. My old one does not have UEFI compatibility, so I decided to make an upgrade to Intel today given that I would need a UEFI motherboard to use my new HDD. How much can I use a dying hard drive (bad sectors according to Hitachi Drive Fitness Test)? I have assumed not at all, to be safe.

    Read the article

  • How can I make a USB flash drive appear/not appear as a CD drive?

    - by mmyers
    I recently was given a small USB flash drive as an advertising gimmick. When I plug it in, only one drive appears: a CD drive with 42kb used (just an autorun.inf file which launches the manufacturer's website). I know U3 drives also appear as CD drives, but their uninstall utility only works for their own drives. How can I make it appear as a USB drive instead? Conversely, if I wanted to do the same thing for myself, how would I make it appear as a CD drive? I'm sure it can be done programmatically, or else the uninstall program wouldn't work.

    Read the article

  • Repairing hard disk when Windows installation disk won't boot

    - by Echows
    I'm trying to recover some data from a faulty hard disk with Windows installed on it (on which Windows won't even boot). I have tried so far: Booting to Ubuntu live USB stick and running ntfsfix (didn't work) Trying to mount the broken partition when running Ubuntu from usb stick (doesn't mount) Running photorec image recovery tool from live Ubuntu (it found some stuff but not the images I was looking for) Now as a last resort I got myself a Windows installation on a USB stick so that I can try fdisk, but the installer doesn't work. The loading screen shows up and then the installer crashes. The installer works fine on other computers. I suspect that the installer is trying to read the hard drive to see if there's something there but when it can't read one partition, it crashes. On Ubuntu, I can mount other partitions except the one I'm interested in so at least the hard drive is not completely dead. So the question is, what options do I have left? To be more specific, my goal is to recover some images from the faulty ntfs-partition on the hard drive. Other than that, I don't care about the contents of the hard disk.

    Read the article

  • Hard drive write speed - finding a lighter antivirus?

    - by Shingetsu
    I recently have been getting a lot of system lag here (for example, the mouse and the display in general take about 15 seconds to react in the worst cases). After a lot of monitoring the resources, I found that the problem mainly happens when too much Disk I/O is being done. Three culprits have been identified: My browser had the highest write I/O with 35,000,000 I/O Write Bytes. Steam had the highest read I/O (when IDLE!!!) with 106,000,000 I/O Read Bytes. My antivirus (in both cases I will soon mention) was the runner up in both cases with: 30,000,000ish write and 80,000,000ish read. The first AV I had was Avast! which I had liked on my previous system. After noticing it taking so much I/O I switched to Panda (supposing it wouldn't use TOO much during idle phase). However it only used a bit less I/O. Just a lot less memory and cpu and somewhat more network. My browser at the moment is Maxthon 3 (which I like a lot). Before this I was running chrome which had similar data and much higher cpu when running in the background was enabled. I'm not going to be running steam all the time and there aren't many alternatives to it. I like my browser very much, but I AM willing to switch if there's an obvious problem (I'm in programming, however I'm not a very good sysadmin, especially not when it comes to windows). Finally, my system almost stops lagging when I turn off the antivirus (and preferably steam) (some remains but once in every 5-6 hours for a few seconds so it isn't a big problem). My question (has a few parts): Is it possible to configure steam to lower it's I/O usage? (and maybe network while we're at it?) Which antivirus (very preferably free) uses lowest I/O while idle (I leave PC alone during active scans so that isn't a problem). Is there an obvious problem with my current browser and, if so, is there a way to fix it or should I switch and, if so, to what? (P.S. I've been on FFox for some time too). Info on system: Windows 7 (32 bit T_T, I am getting a new one in a few months but I want to keep using system during that time though). Hard Drive (main) is a Raid0. (Also have an external 1TB one which contains steam (and steam alone). As such it doesn't get used by much anything other than steam and isn't a very large problem. However steam still uses some I/O of registry) CPU: Intel(R) Core(TM)2 CPU [email protected] RAM: 6GB (3.25GB usable) (this and CPU have little effect as shown in next section) Additional info: Memory usage during problematic times: 44% CPU usage during problematic times: 35% Page File: main drive: system managed. 1TB drive: none. The current system I'm using is about 6 years old and is mainly a place holder while I await the new one in a few months. Final words: this is my 1st post on Super User (this question wouldn't feel right on Stack Overflow where I usually stay). If it doesn't have it's place here please tell me. If anything is wrong with it, same. Edit Technically I'm looking for a live thread detection program with minimal IO usage. I already have good active scan capability: Kaspersky (the free scanner uses the paid database) and MalwareBytes. Edit 2 Noticed another one, it seems that windows media player has been using stuff even when off! Turning it off and restarting now. If the problem is fixed I'll tell you guys. The reason I didn't notice it before was because I didn't have resource manager in front of me at the MOMENT of the problem. Now I did and it was at the very top of the list!

    Read the article

< Previous Page | 17 18 19 20 21 22 23 24 25 26 27 28  | Next Page >